New methods for surface ultrastructure: Comparative studies of scanning electron microscopy, transmission electron microscopy and replica method

Native collagen sheet mask improves skin health and appearance: A comprehensive clinical evaluation

BACKGROUND

Collagen, a critical structural protein found abundantly in animal skin and bones, has become increasingly recognized for its potential therapeutic role in skincare. Despite growing interest, the scientific evidence for the efficacy of collagen sheet masks remains limited. The principal objective of our study was to provide insights into the multifaceted role of collagen in skin health, with a specific focus on its application in collagen sheet masks.

METHODS

The effects of a collagen sheet mask consisting of >92% native bovine collagen were investigated. The soluble protein components of the collagen matrix were analyzed and the influence of soluble collagen components on fibroblast regulation was examined. Scanning Electron Microscope (SEM) analysis was performed for structural analysis and effect on irritated skin. Five different clinical studies were conducted, including a comparison of the diversity of the skin microbiome, the tolerance and local irritating reactions in atopic dermatitis, an evaluation of skin redness after UV radiation, wrinkle reduction, and hydration and skin roughness of the collagen mask in comparison to a pre-soaked cellulose sheet mask.

RESULTS

The collagen mask contains soluble protein components, including small collagen peptides. The mask showed potential for promoting fibroblast activity. SEM analysis showed a native collagen structure similar to human dermis. The mask maintained the skin microbiome diversity and decreased skin pH levels. It demonstrated good tolerability on both intact and lesional skin and had a significant effect in reducing erythema caused by UV radiation compared to other skincare products. It showed significant improvements in skin hydration and the volume of eye wrinkles and was more effective than pre-soaked cellulose sheet masks.

CONCLUSION

Collagen sheet masks have the potential to positively impact skin health and appearance by increasing hydration, reducing erythema, minimizing wrinkles, and maintaining a healthy skin microbiome and skin barrier.

In Vivo Assessment of Skin Surface Pattern: Exploring Its Potential as an Indicator of Bone Biomechanical Properties

The mechanical properties of bone tissue are the result of a complex process involving collagen-crystal interactions. The mineral density of the bone tissue is correlated with bone strength, whereas the characteristics of collagen are often associated with the ductility and toughness of the bone. From a clinical perspective, bone mineral density alone does not satisfactorily explain skeletal fragility. However, reliable in vivo markers of collagen quality that can be easily used in clinical practice are not available. Hence, the objective of the present study is to examine the relationship between skin surface morphology and changes in the mechanical properties of the bone. An experimental study was conducted on healthy children (n = 11), children with osteogenesis imperfecta (n = 13), and women over 60 years of age (n = 22). For each patient, the skin characteristic length (SCL) of the forearm skin surface was measured. The SCL quantifies the geometric patterns formed by wrinkles on the skin's surface, both in terms of size and elongation. The greater the SCL, the more deficient was the organic collagen matrix. In addition, the bone volume fraction and mechanical properties of the explanted femoral head were determined for the elderly female group. The mean SCL values of the healthy children group were significantly lower than those of the elderly women and osteogenesis imperfecta groups. For the aged women group, no significant differences were indicated in the elastic mechanical parameters, whereas bone toughness and ductility decreased significantly as the SCL increased. In conclusion, in bone collagen pathology or bone aging, the SCL is significantly impaired. This in vivo skin surface parameter can be a non-invasive tool to improve the estimation of bone matrix quality and to identify subjects at high risk of bone fracture.

Impact of Indenter Size and Microrelief Anisotropy on the Tribological Behavior of Human Skin

Everyday, we interact with screens, sensors, and many other devices through contact with the skin. Experimental efforts have increased our knowledge of skin tribology but are challenged by the fact that skin has a complex structure, undergoes finite deformations, has nonlinear material response, and has properties that vary with anatomical location, age, sex, and environmental conditions. Computational models are powerful tools to dissect the individual contribution of these variables to the overall frictional response. Here, we present a three-dimensional high-fidelity multilayer skin computational model including a detailed surface topography or skin microrelief. Four variables are explored: local coefficient of friction (COF), indenter size, mechanical properties of the stratum corneum, and displacement direction. The results indicate that the global COF depends nonlinearly on the local COF, implying a role for skin deformation on the friction response. The global COF is also influenced by the ratio of the indenter size to the microrelief features, with larger indenters smoothing out the role of skin topography. Changes in stiffness of the uppermost layer of skin associated with humidity have a substantial effect on both the contact area and the reaction forces, but the overall changes in the COF are small. Finally, for the microrelief tested, the response can be considered isotropic. We anticipate that this model and results will enable the design of materials and devices for a desired interaction against skin.

Micro-relief characterization of benign and malignant skin lesions by polarization speckle analysis in vivo

BACKGROUND/PURPOSE

A recent direction in skin disease classification is to develop quantitative diagnostic techniques. Skin relief, colloquially known as roughness, is an important clinical feature. The aim of this study is to demonstrate a novel polarization speckle technique to quantitatively measure roughness on skin lesions in vivo. We then calculate the average roughness of different types of skin lesions to determine the extent to which polarization speckle roughness measurements can be used to identify skin cancer.

METHODS

The experimental conditions were set to target the fine relief structure on the order of ten microns within a small field of view of 3 mm. The device was tested in a clinical study on patients with malignant and benign skin lesions that resemble cancer. The cancer group includes 37 malignant melanomas (MM), 43 basal cell carcinomas (BCC), and 26 squamous cell carcinomas (SCC), all categories confirmed by gold standard biopsy. The benign group includes 109 seborrheic keratoses (SK), 79 nevi, and 11 actinic keratoses (AK). Normal skin roughness was obtained for the same patients (301 different body sites proximal to the lesion).

RESULTS

The average root mean squared (rms) roughness ± standard error of the mean for MM and nevus was equal to 19 ± 5 μm and 21 ± 3 μm, respectively. Normal skin has rms roughness of 31 ± 3 μm, other lesions have roughness of 35 ± 10 μm (AK), 35 ± 7 μm (SCC), 31 ± 4 μm (SK), and 30 ± 5 μm (BCC).

CONCLUSION

An independent-samples Kruskal-Wallis test indicates that MM and nevus can be separated from each of the tested types of lesions, except each other. These results quantify clinical knowledge of lesion roughness and could be useful for optical cancer detection.

Large-field-of-view scanning electron microscopy of the paraventricular nucleus of the hypothalamus during diet-induced obesity

Dysregulation in the paraventricular nucleus of the hypothalamus (PVN) is associated with a variety of diseases including those related to obesity. Although most investigations have focused on molecular changes, structural alterations in PVN neurons can reveal underlying functional disruptions. Although electron microscopy (EM) can provide nanometer resolution of brain structures, an inherent limitation of traditional transmission EM is the single field of view nature of data collection. To overcome this, we used large-field-of-view high-resolution backscatter scanning electron microscopy (bSEM) of the PVN. By stitching high-resolution bSEM images, taken from normal chow and high-fat diet mice, we achieved interactive, zoomable maps that allow for low-magnification screening of the entire PVN and high-resolution analyses of ultrastructure at the level of the smallest cellular organelle. Using this approach, quantitative analysis across the PVN revealed marked electron-dense regions within neuronal nucleoplasm following high-fat diet feeding, with an increase in kurtosis, indicative of a shift away from a normal distribution. Furthermore, measures of skewness indicated a shift toward darker clustered electron-dense regions, potentially indicative of heterochromatin clusters. We further demonstrate the utility to map out healthy and altered neurons throughout the PVN and the ability to remotely perform bSEM imaging in situations that require social distancing, such as the COVID-19 pandemic. Collectively, these findings present an approach that allows for the precise placement of PVN cells within an overall structural and functional map of the PVN. Moreover, they suggest that obesity may disrupt PVN neuronal chromatin structure.NEW & NOTEWORTHY Paraventricular nucleus of the hypothalamus (PVN) alterations are linked to obesity-related conditions, but limited knowledge exists about neuroanatomical changes in this region. A large-field-of-view backscatter scanning electron microscopy (bSEM) method was used, which allowed the identification of up to 40 PVN neurons in individual samples. During obesity in mice, bSEM revealed changes in PVN neuronal nucleoplasm, possibly indicating chromatin clustering. This microscopy advancement offers valuable insights into neuroanatomy in both healthy and disease conditions.

Evaluation of a new connected portable camera for the analysis of skin microrelief and the assessment of the effect of skin moisturisers

BACKGROUND

Silicone replicas and non-contact methods are effective methods to analyse the micrometric scale of the skin microrelief. Yet, they imply data capture in research facilities. The capabilities of a new connected portable camera were evaluated to analyse microrelief under nomadic conditions, also studying the effect of moisturisers.

MATERIALS AND METHODS

3D depth maps were constructed using shape-from-shading algorithms. Roughness heterogeneity (Spa) was computed, and skin profiles were extracted to calculate roughness amplitude (Ra, Rq), as well as furrows/plateaus characteristics. Validation of the connected camera was performed on tanned cowhide leather and on the inner forearm skin of a single subject. The forearms of 18 subjects (23-60 years old) were also evaluated. While living their regular life, they self-performed triplicate acquisitions at various times. The effects of a placebo and of cream containing moisturisers-saccharide isomerate, urea or xylitylglucoside-anhydroxylitol-xylitol-were investigated, using untreated control skin as a reference.

RESULTS

Validation of the device on leather and forearm skin shows high repeatability. The 18 subjects show the known correlation between age and changes in microrelief. While testing formulas, 8 h after a single application, all decreased Spa (-1.6/-2.1 folds). Only saccharide isomerate and xylitylglucoside-anhydroxylitol-xylitol decreased Ra (-2.4/-2.8 folds). The sectional area of plateaus was reduced from -1.5 (urea) to -2.1 folds (xylitylglucoside-anhydroxylitol-xylitol). The height of plateaus is also decreased by all moisturisers, from -1.5 (urea) to -2.1 folds (xylitylglucoside-anhydroxylitol-xylitol).

CONCLUSION

This novel camera device enables microrelief analysis under nomadic conditions, allowing monitoring its changes along the day and upon moisturisers' application.

Quantification of Microstructural Changes in the Dermis of Elderly Women Using Morphometric Indices of the Skin Surface

OBJECTIVE

The main objective of this study was the development of a non-invasive mathematical marker of the skin surface, the characteristic length, to predict the microstructure of the dermis. This marker, at the individual level, is intended to provide the biological age of the patient in the context of personalised medicine for the elderly.

STUDY DESIGN

To validate this hypothesis, a clinical study was conducted on 22 women over 60 years old from a population of osteoporotic subjects who sustained a femoral neck fracture: a morphological analysis of the skin surface was performed on the patient's forearm and quantitatively compared with microarchitectural parameters of the dermis.

MAJOR RESULTS

The Elastin-to-Collagen ratio measured on dermis samples ranged between 0.007 and 0.084, with a mean of 0.035 ± 0.02. The surface characteristic length ranged between 0.90 and 2.621, with a mean of 0.64 ± 0.51. A very strong correlation was found between this characteristic length and the Elastin-to-Collagen ratio (r = 0.92).

CONCLUSIONS

This study proposes an original diagnostic tool based on morphometric indices of the skin surface and shows a direct quantitative relationship with the dermis microarchitecture and its collagen and elastin content. The proposed method allows reliable and easy access to the intrinsic ageing of the dermis, which would be a strong biomarker in a personalised collagen treatment approach.

Investigating the depolarization property of skin tissue by degree of polarization uniformity contrast using polarization-sensitive optical coherence tomography

The depolarization property of skin has been found to be important for skin cancer detection. Previous techniques based on light polarization lack the capability of depth differentiation. Polarization-sensitive optical coherence tomography (PS-OCT) has the advantage of both depth-resolved 3D imaging and high sensitivity to polarization. In this study, we investigate the depolarization property of skin tissue using PS-OCT, especially with the degree of polarization uniformity (DOPU) contrast. Well designed skin phantoms with various surface roughness levels and optical properties mimicking skin are imaged by PS-OCT and the DOPU values are quantified. The result shows a correlation between DOPU and surface roughness, where a higher roughness corresponds to a lower DOPU value. An index matching experiment with a water layer confirms the impact of surface condition on light depolarization. Refraction of backscattered photons on the surface boundary is attributed to the broadening of backscattering angle and thus depolarization. To the best of our knowledge, this is the first time the impact of surface roughness on DOPU is reported and its mechanism explained. Furthermore, through preliminary in vivo skin imaging, the capability of DOPU in detecting depolarization in skin is demonstrated. By utilizing the 3D imaging from PS-OCT, DOPU can offer a high-resolution depth differentiation and quantification of depolarization in skin tissue.

Recent Impact of Microfluidics on Skin Models for Perspiration Simulation

Skin models offer an in vitro alternative to human trials without their high costs, variability, and ethical issues. Perspiration models, in particular, have gained relevance lately due to the rise of sweat analysis and wearable technology. The predominant approach to replicate the key features of perspiration (sweat gland dimensions, sweat rates, and skin surface characteristics) is to use laser-machined membranes. Although they work effectively, they present some limitations at the time of replicating sweat gland dimensions. Alternative strategies in terms of fabrication and materials have also showed similar challenges. Additional research is necessary to implement a standardized, simple, and accurate model representing sweating for wearable sensors testing.

Optical Technologies for the Improvement of Skin Cancer Diagnosis: A Review

The worldwide incidence of skin cancer has risen rapidly in the last decades, becoming one in three cancers nowadays. Currently, a person has a 4% chance of developing melanoma, the most aggressive form of skin cancer, which causes the greatest number of deaths. In the context of increasing incidence and mortality, skin cancer bears a heavy health and economic burden. Nevertheless, the 5-year survival rate for people with skin cancer significantly improves if the disease is detected and treated early. Accordingly, large research efforts have been devoted to achieve early detection and better understanding of the disease, with the aim of reversing the progressive trend of rising incidence and mortality, especially regarding melanoma. This paper reviews a variety of the optical modalities that have been used in the last years in order to improve non-invasive diagnosis of skin cancer, including confocal microscopy, multispectral imaging, three-dimensional topography, optical coherence tomography, polarimetry, self-mixing interferometry, and machine learning algorithms. The basics of each of these technologies together with the most relevant achievements obtained are described, as well as some of the obstacles still to be resolved and milestones to be met.

Mechanical and topographical anisotropy for human skin: Ageing effect

Skin ageing is a complex process which strongly impacts the three skin layers (epidermis, dermis, hypodermis) both functionally and structurally. Of particular interest are the effects of ageing on the dermis biomechanics and how this evolution can impact the reorganization of the cutaneous lines which compose the skin relief. It has been argued that the skin relief could reflect the underlying mechanical condition of the skin. Nevertheless, there is not yet conclusive evidence of the existence of such a link. This work aims at experimentally studying, in vivo, the correlation between the anisotropy of human skin biomechanics and skin topography as a function of ageing. The study was conducted on a panel of 20 men divided into 4 groups according to age (from 23 to 64 years old). The measurements were performed on the right volar forearm of each volunteer. For the biomechanical measurements, an innovative contactless bio-rheometer was developed. It allows access to the mechanical behaviour of the skin in several directions. This device generates an air blast without any contact with the skin area and measures its dynamic response (evaluation of speed of wave propagation) with a linear laser. Moreover, a turntable enables measurements to be made in different angular directions. To analyse the topography of skin relief, we proposed a new method, based on watershed and linear radon transformations. First, an optical analysis of a replica of the skin relief is performed. Then, from the skin image obtained, the density of the cutaneous lines is calculated in different directions using watersheld transformation. The orientation of the detected lines is then estimated with an algorithm based on linear radon transformation. The results observed show a good correlation between the skin relief and the mechanical properties of the skin all along the ageing process. For both topography and mechanical properties, there is a transition from an almost isotropic mechanical behaviour to an anisotropic one as a function of ageing process. Thus, we might conclude that the skin relief reflects the underlying mechanical conditions of the skin.

Appearance of aging signs in differently pigmented facial skin by a novel imaging system

Background

Facial wrinkles, pores, and uneven skin tone are major beauty concerns. There is differential manifestation of aging signs in different ethnic groups. In this regard, studies on Black Africans from the African continent are scarce.

Objective

To investigate facial wrinkles, pores, and skin tone in Black African women from Mauritius Island and elucidate the differences to Caucasian women from France.

Methods

Facial images were taken using the imaging system ColorFace^®. Wrinkles and pores were measured by their length, depth, surface, volume, and number; for skin tone, we measured L*a*b* and calculated ITA, IWA_Newtone, and color homogeneity.

Results

We found good correlations of wrinkle and pore scores with expert ranking done on ColorFace^® images for Caucasians (Spearman's rho = 0.78 and 0.72) and Black Africans (Spearman's rho = 0.86 and 0.65). Caucasians showed more advanced facial signs of aging than Black Africans. Exceptions were vertical lines on upper lip and the depth of pores which were greatest for the Black African subjects. Black Africans had higher heterogeneity scores indicative for uneven skin tone. Luminance (L*) was significantly higher in Caucasians but a* and b* values were significantly higher in the Black African subjects. ITA and IWA_Newtone were significantly higher for Caucasians.

Conclusions

The high correlation between expert ranking and wrinkle and pore measurements prove ColorFace^® a valid imaging system to study skin aging. Our results show that Africans from the African continent show delayed signs of aging compared to Caucasians. Some exceptions suggest that ethnic differences in facial aging are a complex phenomenon.

On skin microrelief and the emergence of expression micro-wrinkles

Over the course of a life time, as a result of adaptive mechanobiological processes (e.g. ageing), or the action of external physical factors such as mechanical loading, the human skin is subjected to, and hosts complex biophysical processes. These phenomena typically operate through a complex interplay, that, ultimately, is responsible for the evolutive geometrical characteristics of the skin surface. Wrinkles are a manifestation of these effects. Although numerous theoretical models of wrinkles arising in multi-layered structures have been proposed, they typically apply to idealised geometries. In the case of skin, which can be viewed as a geometrically complex multi-layer assembly, it is pertinent to question whether the natural skin microrelief could play a significant role in conditioning the characteristics of compression-induced micro-wrinkles by acting as an array of geometrical imperfections. Here, we explore this question through the development of an anatomically-based finite strain parametric finite element model of the skin, represented as a stratum corneum layer on top of a thicker and softer substrate. Our study suggests that skin microrelief could be the dominant factor conditioning micro-wrinkle characteristics for moderate elastic modulus ratios between the two layers. Beyond stiffness ratios of 100, other factors tend to overwrite the effects of skin microrelief. Such stiffness ratio fluctuations can be induced by changes in relative humidity or particular skin conditions and can therefore have important implications for skin tribology.

3D profilometric characterization of the aged skin surface using a skin replica and alicona Mex software

The skin's surface is characterized by a network of furrows and wrinkles showing different height and depth. Different studies showed that processes such as aging, photo aging and cancer may alter dermal ultrastructure surface. The quantitative analysis of skin topography is a key point for understanding health condition of the skin. Here, for the first time, the skin fine structure was studied via a new approach where replica method was combined with Mex Alicona software and scanning electron microscopy (SEM). The skin texture of cheek and forearm were studied in 120 healthy sardinian volunteers. Patients were divided into three different aged groups. The skin areas of interest were reproduced by the silicone replica method, each replica was explored by SEM and digital images were taken. By using Mex Alicona software were created 3D imagine and a list of 24 surface texture parameters were obtained, of these the most representative were chosen in order to assess eventual changes between groups. The skin's texture of forearm and cheek showed a gradually loss of its typical polyhedric mesh with increasing age group. In particular, the photoexposition increased loss of dermal texture. At today, Alicona mex technology was exclusively used on palaeontology studies, our results showed that a deep analyze of skin texture was performed and support Mex alicona software as a new promising tool on dermatological research. This new analytical approach provided an easy and fast process to appreciate skin texture and its changes, by using high quality 3D dimension images. SCANNING 38:213-220, 2016. © 2015 Wiley Periodicals, Inc.

Cyanoacrylate skin surface stripping and the 3S-Biokit advent in tropical dermatology: a look from Liège

In the dermatopathology field, some simple available laboratory tests require minimum equipment for establishing a diagnosis. Among them, the cyanoacrylate skin surface stripping (CSSS), formerly named skin surface biopsy or follicular biopsy, represents a convenient low cost procedure. It is a minimally invasive method collecting a continuous sheet of stratum corneum and horny follicular casts. In the vast majority of cases, it is painless and is unassociated with adverse events. CSSS can be performed in subjects of any age. The method has a number of applications in diagnostic dermatopathology and cosmetology, as well as in experimental dermatology settings. A series of derived analytic procedures include xerosis grading, comedometry, corneofungimetry, corneodynamics of stratum corneum renewal, corneomelametry, corneosurfametry, and corneoxenometry.

Relation between skin micro-topography, roughness, and skin age

BACKGROUND

The topography of the skin surface consists of lines, wrinkles, and scales. Primary and secondary lines form a network like structure that may be identified as polygons. Skin surface roughness measurements are widely applied in dermatological research and practice but the relation between roughness parameters and their anatomical equivalents are unclear. This study aimed to investigate whether the number of closed polygons (NCP) per measurement field can be used as a reliable parameter to measure skin surface topography. For this purpose, we analysed the relation between skin surface roughness parameters and NCP in different age groups.

METHODS

Images of the volar forearm skin of 38 subjects (14 children, 12 younger, and 12 older adults) were obtained with the VisioScan VC98. The NCP was counted by three independent researchers and selected roughness parameters were measured. Interrater reliability of counting the number of closed polygons and correlations between NCP, roughness parameters, and age were calculated.

RESULTS

The mean NCP/mm² in children was 3.1 (SD 1.1), in younger adults 1.0 (SD 0.7), and in older adults 1.0 (SD 0.9). The interrater reliability was 0.9. A negative correlation of NCP/mm² with age was observed, whereas measured roughness parameters were positively associated with age. NCP/mm² was weakly related to skin roughness.

CONCLUSION

The NCP/mm² is a reproducible parameter for characterizing the skin surface topography. It is proposed as an additional parameter in dermatological research and practice because it represents distinct aspects of the cutaneous profile not covered by established roughness parameters.

An objective assessment of botulinum toxin A effect on superficial skin texture

The botulinum toxin A (BTX-A) role on elimination of hyperkinetic wrinkles is consolidated, although relying on subjective methods of assessment. A prospective open-label study was performed on 10 patients to objectively analyze superficial skin texture changes caused by BTX-A in the glabellar area. Skin areas were reproduced by silicon replica technique at baseline, 1 month, and 6 months after treatment. Takahashi's parameters (roughness, anisotropy, microsulcus number, and width) were obtained from scanning electron microscopy (SEM) analysis and compared using the Wilcoxon signed rank test. SEM images showed skin texture changes, and software analysis gave parameters for statistical analysis, allowing an objective evaluation. Statistically significant parameter modifications were evidenced. BTX-A effectiveness in wrinkle treatment was confirmed, and no differences in skin texture parameters from baseline to toxin action end were noted.

A pilot study in the application of texture relief for digitally designed facial prostheses

This pilot research aims to identify and assess suitable technologies that may be used to capture, create, and produce fine textures and wrinkles that may be incorporated into computer aided prosthesis design and production techniques. A range of suitable technologies is identified and two methods that may be used in different prosthetic rehabilitation situations are assessed: the creation of three-dimensional relief in a computer aided design environment and the capture of facial anatomy and texture using fringe-projection surface scanning. Patterns were produced using the suitable rapid prototyping processes identified, and these were assessed by a qualified and experienced prosthetist. The suitability of the technologies is commented upon, limitations discussed, and future directions identified.

A Prospective Study of Anti-Aging Topical Therapies Using a Quantitative Method of Assessment

BACKGROUND

In the treatment of photoaged skin, glycolic acid works by removing superficial portions of the epidermis and stimulating dermis regeneration. Vitamins A, C, and E should stimulate collagen production and antioxidants should prevent free radical damage and skin aging. However, the effectiveness of different therapies has often relied on subjective methods of assessment. Histologic analysis has seldom been used because of the drawback of permanent scarring. In the literature, the use of a quantitative method for the assessment of facial rejuvenation has been described: the silicone replica technique. The authors' aim was to promote and recommend the use of this technique and, in particular, to test the effect of glycolic acid and multivitamin- and antioxidant-based products on skin texture.

METHODS

The authors performed a prospective, randomized, double-blind, controlled study on 30 women treated topically in the outer canthal region (crow's-feet area). Patients were divided into three groups (groups A, B, and C); each group consisted of five patients between the ages of 31 and 40 years and five patients between the ages of 41 and 50 years. Group A was treated by glycolic acid application, initially at home for 2 weeks, followed by a higher concentration administered in the office weekly for six applications. Group B was treated by topical application at home of a multivitamin product daily for 3 months. Group C was treated with a cream base (placebo) for 3 months and represented the control group. Skin areas under treatment were photographed and reproduced by the silicone replica technique at baseline and at the end of treatment. This technique reproduces exactly the skin's texture. Digital images were obtained from skin replicas and analyzed by specific software for different parameters: roughness, microsulcus number, and width. Pretreatment and posttreatment values were compared using the Wilcoxon signed-rank test.

RESULTS

In group A, microsulcus number and width were statistically decreased, but roughness was not. In groups B and C, parameters were not statistically modified.

CONCLUSIONS

The silicone replica technique allowed a quantitative analysis of results obtained with different topical therapies. In particular, it confirmed the efficacy of glycolic acid in skin rejuvenation.

In vivo determination of skin surface topography using an optical 3D device

BACKGROUND/PURPOSE

Topography of the skin surface is a mirror of the functional skin status. Therefore, its evaluation is of great interest for dermatological research. In the present study, a new optical measuring system was applied to evaluate human skin surface topography in vivo and non-invasively, in order to determine elastotic and mimic wrinkles dependent on age, body site and therapy.

METHODS

The measurements were performed on the back (n=5), the flexor forearm (n=14) of volunteers in different age groups and on the face of women (n=4) participating in an anti-wrinkle study. The evaluation of the three-dimensional-profiles was performed determining skin surface parameters (mean roughness (R(a)), mean depth of roughness (R(z)), maximum roughness (R(m)) and waviness (W(t))) and applying Fourier analysis.

RESULTS

Significant increases in all surface parameters were obtained on the forearms with increasing age. Differences between the surface topographies of forearm and back were only expressed by the waviness and the Fourier analysis. The treatment with botulinum Toxin A led to a diminution of mimic wrinkles as reflected by the furrow profiles.

CONCLUSIONS

The results show a significant dependence of the skin surface topography on the age of the volunteer and the body site measured. Particularly the waviness, the Fourier analysis and the furrow profiles reflect such dependencies. The system used also fulfils the requirements for the testing of therapies, as was demonstrated by the reduction of mimic wrinkles after treatment with botulinum Toxin A.

Ectopic plantar nail: a report of two cases

Ectopic nail is an extremely rare condition related to acquired or congenital anomalies. Almost 40 cases are reported in the literature, mostly in Japanese patients. In the majority of these patients, ectopic nails developed in the dorsal aspect of the fingers; they are associated in some cases with acquired or congenital growth anomalies or to polydactyly. Recently, we observed two male adult patients with true ectopic nails of the foot (sole and heel). Both patients were not affected by ectodermic dysplasia or foot malformations. The lesion relapsed after surgical excision in one case. Histology showed features of a well-developed and normal nail plate and matrix. A transmission electron microscope study was done in one case, showing typical aspects of onychocytes. The other nail was reproduced by a silicone replica technique and its superficial texture, shape and relationship with surrounding tissue were analysed by scanning electron microscopy.

A computerized analysis of intrinsic forces in the skin

The skin of the volar forearm is a site selected for many biometrological studies. We studied the influence of forearm position when evaluating the surface topography and mechanical properties of the skin in normal young adults. Optical profilometry of skin replicas and the suction biomechanical method (Cutometer, 2 and 8 mm probes) were used in combination with evaluation of the thickness and sliding mobility of the dermis and dermohypodermal tissues. The dermal and dermohypodermal thicknesses did not correlate with the various profilometric and biomechanical measurements. The surface topography and the axial sliding mobility of the skin were markedly influenced by forearm position, while the only mechanical property of the skin to be affected was skin stretchability assessed with the 2 mm probe. It is concluded that limb position mostly influences biometrological measurements made in the plane of the skin surface, while it has little effect on most of the Cutometer measurements.

Three-dimensional measurements of skin surface topography by triangulation with a new laser profilometer

The fast measurement of furrows or wrinkles requires the use of a non-contact device. We have chosen a laser detector based on a triangulation principle, using position-sensitive detectors. This apparatus has a sensitivity of about 2-3 microns for a vertical range > 1 mm; this vertical range can reach 8 mm. There is no contact between the detector and the surface and this reduces the measurement time because, while data are being transmitted, there is no decrease in the scanning speed as with earlier methods. We describe the device and its technical characteristics. The limits of use are shown in the measurement of low-amplitude defects (> 3-4 microns) and of wide defects of < or = 8 mm. Examples of software possibilities and practical applications related to skin microrelief, wrinkles and pathological cases, are also described.

Comparative study of rheological and surface pattern parameters of human skin as a function of age, work conditions and sun exposure

The present study deals with the comparison of three non-invasively measurable parameters of human skin as a function of age and environmental factors. Two of them are related to mechanical properties and one to the surface microtopography of the skin. Three populations were studied living in different conditions concerning exposure of skin to external influences. The first population (cloistered nuns) lives in well controlled, uniform conditions (skin is always hidden from solar radiation), the second one is regularly exposed to infrared radiation (glass-blowers) and the third one represents an average population (white-collar workers). Two of the studied parameters seem interesting for the estimation of biological aging which may not be identical to chronological age. The first one, the elastic rebound of the skin, is generally well correlated to age but the rate of change is rather slow. The other one, related to the skin surface relief, also generally well related to age, changes faster but the dispersion of the individual results is greater than for elastic rebound. For a better estimation of biological aging the determination of both parameters seems to be preferable to the determination of any of them individually.

Treatment of brittle fingernails and onychoschizia with biotin: scanning electron microscopy

Pathologic hoof changes in horses and swine can be normalized by administration of biotin. This vitamin has been given orally to women with brittle fingernails or onychoschizia. The aim of the study was to test whether the favorable clinical results could be corroborated by scanning electron microscopy. We investigated the distal ends of the fingernails from 32 persons. They were placed into three groups: group A consisted of 10 control subjects with normal nails, group B comprised eight patients with brittle nails studied before and after biotin treatment, and group C was 14 patients with brittle nails in whom the administration of biotin did not coincide exactly with the initial and terminal clipping of the nails. The thickness of the nails in group B increased significantly by 25%. In group C, the increase was 7%. Splitting of the nails were reduced in groups B and C and the irregular cellular arrangement of the dorsal surface of brittle nails became more regular in all nails of group B and in 8 of 11 nails of group C.

A replica technique for the evaluation of human skin by scanning electron microscopy

A detailed reproducible procedure has been developed for the replication of human skin for scanning electron-microscopic evaluation. Utilizing a test surface, a number of negative and positive materials were evaluated for consistence and clarity of replication. Optimal replication parameters were determined and the method was successfully applied to the evaluation of human skin in vivo. Furthermore, a method was established which permitted repetitive examination of selected skin sites. Experimental results suggest that this replicating procedure can be used to monitor changes in the stratum corneum over time, and extend the range of stratum corneum magnifications.

Onychomycosis (trichophyton mentagrophytes). A scanning electron microscopic observation

Nails from four patients, infected with dermatophytes, were investigated with the scanning electron microscope (SEM) to gain insight into the spatial arrangements of the dermatophytes within the nail. Fungal hyphae could be detected in nails of all four patients. A toenail from one patient infected with Trichophyton mentagrophytes was more extensively studied and the results are presented in this paper. Light microscopic observations with bright field illumination and Nomarski interference contrast confirmed the dermatophytic infection. Fungal hyphae found with the SEM distally on the ventral part of the toenail showed typical T. mentagrophytes structures and the comparison with cultured material clearly demonstrated the correspondence in morphology and size. Besides the fine structural morphology of the invasion of fungal hyphae into the nail plate between the horny cells and/or directly into corneocytes, "tunnel"-like holes were observed in paraffin embedded sections after removal of the paraffin. Scanning electron microscopy, with its enormous focal depth, yielded far more information than light microscopic techniques about the three dimensional behavior of dermatophytes in the nail.