Draft whole genome sequence of the cyanide-degrading bacterium Pseudomonas pseudoalcaligenes CECT5344

Genomic Insights into Cyanide Biodegradation in the Pseudomonas Genus

Molecular studies about cyanide biodegradation have been mainly focused on the hydrolytic pathways catalyzed by the cyanide dihydratase CynD or the nitrilase NitC. In some Pseudomonas strains, the assimilation of cyanide has been linked to NitC, such as the cyanotrophic model strain Pseudomonas pseudoalcaligenes CECT 5344, which has been recently reclassified as Pseudomonas oleovorans CECT 5344. In this work, a phylogenomic approach established a more precise taxonomic position of the strain CECT 5344 within the species P. oleovorans. Furthermore, a pan-genomic analysis of P. oleovorans and other species with cyanotrophic strains, such as P. fluorescens and P. monteilii, allowed for the comparison and identification of the cioAB and mqoAB genes involved in cyanide resistance, and the nitC and cynS genes required for the assimilation of cyanide or cyanate, respectively. While cyanide resistance genes presented a high frequency among the analyzed genomes, genes responsible for cyanide or cyanate assimilation were identified in a considerably lower proportion. According to the results obtained in this work, an in silico approach based on a comparative genomic approach can be considered as an agile strategy for the bioprospection of putative cyanotrophic bacteria and for the identification of new genes putatively involved in cyanide biodegradation.

Quantitative Proteomic Analysis of Cyanide and Mercury Detoxification by Pseudomonas pseudoalcaligenes CECT 5344

The cyanide-degrading bacterium Pseudomonas pseudoalcaligenes CECT 5344 uses cyanide and different metal-cyanide complexes as the sole nitrogen source. Under cyanotrophic conditions, this strain was able to grow with up to 100 μM mercury, which was accumulated intracellularly. A quantitative proteomic analysis by liquid chromatography-tandem mass spectrometry (LC-MS/MS) has been applied to unravel the molecular basis of the detoxification of both cyanide and mercury by the strain CECT 5344, highlighting the relevance of the cyanide-insensitive alternative oxidase CioAB and the nitrilase NitC in the tolerance and assimilation of cyanide, independently of the presence or absence of mercury. Proteins overrepresented in the presence of cyanide and mercury included mercury transporters, mercuric reductase MerA, transcriptional regulator MerD, arsenate reductase and arsenical resistance proteins, thioredoxin reductase, glutathione S-transferase, proteins related to aliphatic sulfonates metabolism and sulfate transport, hemin import transporter, and phosphate starvation induced protein PhoH, among others. A transcriptional study revealed that from the six putative merR genes present in the genome of the strain CECT 5344 that could be involved in the regulation of mercury resistance/detoxification, only the merR2 gene was significantly induced by mercury under cyanotrophic conditions. A bioinformatic analysis allowed the identification of putative MerR2 binding sites in the promoter regions of the regulatory genes merR5, merR6, arsR, and phoR, and also upstream from the structural genes encoding glutathione S-transferase (fosA and yghU), dithiol oxidoreductase (dsbA), metal resistance chaperone (cpxP), and amino acid/peptide extruder involved in quorum sensing (virD), among others. IMPORTANCE Cyanide, mercury, and arsenic are considered very toxic chemicals that are present in nature as cocontaminants in the liquid residues generated by different industrial activities like mining. Considering the huge amounts of toxic cyanide- and mercury-containing wastes generated at a large scale and the high biotechnological potential of P. pseudoalcaligenes CECT 5344 in the detoxification of cyanide present in these industrial wastes, in this work, proteomic, transcriptional, and bioinformatic approaches were used to characterize the molecular response of this bacterium to cyanide and mercury, highlighting the mechanisms involved in the simultaneous detoxification of both compounds. The results generated could be applied for developing bioremediation strategies to detoxify wastes cocontaminated with cyanide, mercury, and arsenic, such as those generated at a large scale in the mining industry.

Proteomic Analysis of Arsenic Resistance during Cyanide Assimilation by Pseudomonas pseudoalcaligenes CECT 5344

Wastewater from mining and other industries usually contains arsenic and cyanide, two highly toxic pollutants, thereby creating the need to develop bioremediation strategies. Here, molecular mechanisms triggered by the simultaneous presence of cyanide and arsenite were analyzed by quantitative proteomics, complemented with qRT-PCR analysis and determination of analytes in the cyanide-assimilating bacterium Pseudomonas pseudoalcaligenes CECT 5344. Several proteins encoded by two ars gene clusters and other Ars-related proteins were up-regulated by arsenite, even during cyanide assimilation. Although some proteins encoded by the cio gene cluster responsible for cyanide-insensitive respiration decreased in the presence of arsenite, the nitrilase NitC required for cyanide assimilation was unaffected, thus allowing bacterial growth with cyanide and arsenic. Two complementary As-resistance mechanisms were developed in this bacterium, the extrusion of As(III) and its extracellular sequestration in biofilm, whose synthesis increased in the presence of arsenite, and the formation of organoarsenicals such as arseno-phosphoglycerate and methyl-As. Tetrahydrofolate metabolism was also stimulated by arsenite. In addition, the ArsH2 protein increased in the presence of arsenite or cyanide, suggesting its role in the protection from oxidative stress caused by both toxics. These results could be useful for the development of bioremediation strategies for industrial wastes co-contaminated with cyanide and arsenic.

Antibiotic resistance in plant growth promoting bacteria: A comprehensive review and future perspectives to mitigate potential gene invasion risks

Plant growth-promoting bacteria (PGPB) are endowed with several attributes that can be beneficial for host plants. They opened myriad doors toward green technology approach to reduce the use of chemical inputs, improve soil fertility, and promote plants' health. However, many of these PGPB harbor antibiotic resistance genes (ARGs). Less attention has been given to multi-resistant bacterial bioinoculants which may transfer their ARGs to native soil microbial communities and other environmental reservoirs including animals, waters, and humans. Therefore, large-scale inoculation of crops by ARGs-harboring bacteria could worsen the evolution and dissemination of antibiotic resistance and aggravate the negative impacts on such ecosystem and ultimately public health. Their introduction into the soil could serve as ARGs invasion which may inter into the food chain. In this review, we underscore the antibiotic resistance of plant-associated bacteria, criticize the lack of consideration for this phenomenon in the screening and application processes, and provide some recommendations as well as a regulation framework relating to the development of bacteria-based biofertilizers to aid maximizing their value and applications in crop improvement while reducing the risks of ARGs invasion.

Alternative Pathway for 3-Cyanoalanine Assimilation in Pseudomonas pseudoalcaligenes CECT5344 under Noncyanotrophic Conditions

3-Cyanoalanine and cyanohydrins are intermediate nitriles produced in cyanide degradation pathways in plants and bacteria. 3-Cyanoalanine is generated from cyanide by the 3-cyanoalanine synthase, an enzyme mainly characterized in cyanogenic plants. NIT4-type nitrilases use 3-cyanoalanine as a substrate, forming ammonium and aspartate. In some organisms, this enzyme also generates asparagine through an additional nitrile hydratase activity. The alkaliphilic bacterium Pseudomonas pseudoalcaligenes CECT5344 assimilates cyanide through an intermediate cyanohydrin, which is further converted into ammonium by the nitrilase NitC. This bacterium also contains three additional nitrilases, including Nit4. In this work, a proteomic analysis of P. pseudoalcaligenes CECT5344 cells grown with 3-cyanoalanine as the sole nitrogen source has revealed the overproduction of different proteins involved in nitrogen metabolism, including the nitrilase NitC. In contrast, the nitrilase Nit4 was not induced by 3-cyanoalanine, and it was only overproduced in cells grown with a cyanide-containing jewelry-manufacturing residue. Phenotypes of single and double mutant strains defective in nit4 or/and nitC revealed the implication of the nitrilase NitC in the assimilation of 3-cyanoalanine and suggest that the 3-cyanoalanine assimilation pathway in P. pseudoalcaligenes CECT5344 depends on the presence or absence of cyanide. When cyanide is present, 3-cyanoalanine is assimilated via Nit4, but in the absence of cyanide, a novel pathway for 3-cyanoalanine assimilation, in which the nitrilase NitC uses the nitrile generated after deamination of the α-amino group from 3-cyanoalanine, is proposed. IMPORTANCE Nitriles are organic cyanides with important industrial applications, but they are also found in nature. 3-Cyanoalanine is synthesized by plants and some bacteria to detoxify cyanide from endogenous or exogenous sources, but this nitrile may be also involved in other processes such as stress tolerance, nitrogen and sulfur metabolism, and signaling. The cyanide-degrading bacterium Pseudomonas pseudoalcaligenes CECT5344 grows with 3-cyanoalanine as the sole nitrogen source, but it does not use this nitrile as an intermediate in the cyanide assimilation pathway. In this work, a quantitative proteomic analysis by liquid chromatography-tandem mass spectrometry (LC-MS/MS) was performed to study, for the first time, the response to 3-cyanoalanine at the proteomic level. Proteomic data, together with phenotypes of different nitrilase-defective mutants of P. pseudoalcaligenes CECT5344, provide evidence that in the absence of cyanide, the nitrilase Nit4 is not involved in 3-cyanoalanine assimilation, and instead, the nitrilase NitC participates in a novel alternative 3-cyanoalanine assimilation pathway.

Bioremediation of cyanide-containing wastes: The potential of systems and synthetic biology for cleaning up the toxic leftovers from mining

Synthetic biology could harness the ability of microorganisms to use highly toxic cyanide compounds for growth applied to bioremediation of cyanide-contaminated mining wastes and areas.

Un-steady state modeling for free cyanide removal and biofilm growth in a RBC batch process

Biofilm growth and free cyanide biological removal from gold mine wastewater were modeled and simulated using a bench-scale rotating biological contactor (RBC). Eight batch cultures were run in three independent compartments (1.7 L, each) of the RBC. The system worked under the following conditions: [CN_i^-] = 0.3 g/L, pH = 10.5 ± 0.5, T = 20 ± 5 °C, ω =5 rpm, and 40.5 % of disc submersion. During each culture, biofilm thickness, biomass, and free cyanide concentration in the liquid were quantified. Subsequently, μ_max, [Formula: see text] , [Formula: see text] were determined using experimental data to later model and simulate the biofilm thickness and free cyanide biological removal with Wolfram Mathematica software. After the experiments, free cyanide biological removal was 96.33 % after three days, and maximum biofilm thickness was 0.0292 cm in the 16th day. Moreover, biofilm growth and free cyanide consumption models were adjusted to the experimental data with r² = 0.90 and r² = 0.99. Also, there was an equivalent error of 7.89 and 7.38 and a standard deviation of 10.89 % and 10.17 %, between the models and their experimental data, respectively. Finally, the proposed models will allow improvement of reactor operation and its design.

Role of the Dihydrodipicolinate Synthase DapA1 on Iron Homeostasis During Cyanide Assimilation by the Alkaliphilic Bacterium Pseudomonas pseudoalcaligenes CECT5344

Cyanide is a toxic compound widely used in mining and jewelry industries, as well as in the synthesis of many different chemicals. Cyanide toxicity derives from its high affinity for metals, which causes inhibition of relevant metalloenzymes. However, some cyanide-degrading microorganisms like the alkaliphilic bacterium Pseudomonas pseudoalcaligenes CECT5344 may detoxify hazardous industrial wastewaters that contain elevated cyanide and metal concentrations. Considering that iron availability is strongly reduced in the presence of cyanide, mechanisms for iron homeostasis should be required for cyanide biodegradation. Previous omic studies revealed that in the presence of a cyanide-containing jewelry residue the strain CECT5344 overproduced the dihydrodipicolinate synthase DapA1, a protein involved in lysine metabolism that also participates in the synthesis of dipicolinates, which are excellent metal chelators. In this work, a dapA1 ^- mutant of P. pseudoalcaligenes CECT5344 has been generated and characterized. This mutant showed reduced growth and cyanide consumption in media with the cyanide-containing wastewater. Intracellular levels of metals like iron, copper and zinc were increased in the dapA1 ^- mutant, especially in cells grown with the jewelry residue. In addition, a differential quantitative proteomic analysis by LC-MS/MS was carried out between the wild-type and the dapA1 ^- mutant strains in media with jewelry residue. The mutation in the dapA1 gene altered the expression of several proteins related to urea cycle and metabolism of arginine and other amino acids. Additionally, the dapA1 ^- mutant showed increased levels of the global nitrogen regulator PII and the glutamine synthetase. This proteomic study has also highlighted that the DapA1 protein is relevant for cyanide resistance, oxidative stress and iron homeostasis response, which is mediated by the ferric uptake regulator Fur. DapA1 is required to produce dipicolinates that could act as iron chelators, conferring protection against oxidative stress and allowing the regeneration of Fe-S centers to reactivate cyanide-damaged metalloproteins.

Assimilation of cyanide and cyano-derivatives by Pseudomonas pseudoalcaligenes CECT5344: from omic approaches to biotechnological applications

Mining, jewellery and metal-processing industries use cyanide for extracting gold and other valuable metals, generating large amounts of highly toxic wastewater. Biological treatments may be a clean alternative under the environmental point of view to the conventional physical or chemical processes used to remove cyanide and related compounds from these industrial effluents. Pseudomonas pseudoalcaligenes CECT5344 can grow under alkaline conditions using cyanide, cyanate or different nitriles as the sole nitrogen source, and is able to remove up to 12 mM total cyanide from a jewellery industry wastewater that contains cyanide free and complexed to metals. Complete genome sequencing of this bacterium has allowed the application of transcriptomic and proteomic techniques, providing a holistic view of the cyanide biodegradation process. The complex response to cyanide by the cyanotrophic bacterium P. pseudoalcaligenes CECT5344 and the potential biotechnological applications of this model organism in the bioremediation of cyanide-containing industrial residues are reviewed.

A Case of Adaptive Laboratory Evolution (ALE): Biodegradation of Furfural by Pseudomonas pseudoalcaligenes CECT 5344

Pseudomonas pseudoalcaligenes CECT 5344 is a bacterium able to assimilate cyanide as a nitrogen source at alkaline pH. Genome sequencing of this strain allowed the detection of genes related to the utilization of furfurals as a carbon and energy source. Furfural and 5-(hydroxymethyl) furfural (HMF) are byproducts of sugars production during the hydrolysis of lignocellulosic biomass. Since they inhibit the yeast fermentation to obtain bioethanol from sugars, the biodegradation of these compounds has attracted certain scientific interest. P. pseudoalcaligenes was able to use furfuryl alcohol, furfural and furoic acid as carbon sources, but after a lag period of several days. Once adapted, the evolved strain (R1D) did not show any more prolonged lag phases. The transcriptomic analysis (RNA-seq) of R1D revealed a non-conservative punctual mutation (L261R) in BN5_2307, a member of the AraC family of activators, modifying the charge of the HTH region of the protein. The inactivation of the mutated gene in the evolved strain by double recombination reverted to the original phenotype. Although the bacterium did not assimilate HMF, it transformed it into value-added building blocks for the chemical industry. These results could be used to improve the production of cost-effective second-generation biofuels from agricultural wastes.

Cyanate Assimilation by the Alkaliphilic Cyanide-Degrading Bacterium Pseudomonas pseudoalcaligenes CECT5344: Mutational Analysis of the cyn Gene Cluster

The alkaliphilic bacterium Pseudomonas pseudoalcaligenes CECT5344 can grow with cyanate, cyanide, or cyanide-containing industrial residues as the sole nitrogen source, but the assimilation of cyanide and cyanate takes place through independent pathways. Therefore, cyanide degradation involves a chemical reaction between cyanide and oxaloacetate to form a nitrile that is hydrolyzed to ammonium by the nitrilase NitC, whereas cyanate assimilation requires a cyanase that catalyzes cyanate decomposition to ammonium and carbon dioxide. The P. pseudoalcaligenes CECT5344 cynFABDS gene cluster codes for the putative transcriptional regulator CynF, the ABC-type cyanate transporter CynABD, and the cyanase CynS. In this study, transcriptional analysis revealed that the structural cynABDS genes constitute a single transcriptional unit, which was induced by cyanate and repressed by ammonium. Mutational characterization of the cyn genes indicated that CynF was essential for cynABDS gene expression and that nitrate/nitrite transporters may be involved in cyanate uptake, in addition to the CynABD transport system. Biodegradation of hazardous jewelry wastewater containing high amounts of cyanide and metals was achieved in a batch reactor operating at an alkaline pH after chemical treatment with hydrogen peroxide to oxidize cyanide to cyanate.

New evolving strategies revealed by transcriptomic analysis of a fur- mutant of the cyanotrophic bacterium Pseudomonas pseudoalcaligenes CECT 5344

The transcriptomic analysis (RNA-seq) of a fur mutant of P. pseudoalcaligenes CECT 5344 has revealed that Fur regulates the expression of more than 100 genes in this bacterial strain, most of them negatively. The highest upregulated genes in response to fur deletion, with respect to the wild type, both cultivated in LB medium, corresponded to genes implicated in iron uptake. They include both TonB-dependent siderophore transporters for the active transport across the outer membrane, and ABC-type and MSF-type transporters for the active transport across the cytoplasmic membrane. Therefore, the main response of this bacterium to iron limitation is expressing genes necessary for metabolism of Fe siderophores produced by other microorganisms (xenosiderophores). The number of genes whose expression decreased in the fur- mutant, as well as its normalized expression (fold change), was lower. Among them, it is remarkable the presence of one of the two cas operons of the two CRISP/Cas clusters was detected in the genome of this bacterium. The transcriptome was validated by qPCR, including the decrease in the expression of cas genes (cse1). The expression of cse1 was also decreased by limiting the amount of iron, carbon or nitrogen in the medium, or by adding menadione, a compound that causes oxidative stress. The higher decrease in cse1 expression was triggered by the addition of cyanide in minimal medium. These results suggest that this bacterium responds to stress conditions, and especially to cyanide, taking a reasonable risk with respect to both the uptake of (TonB-dependent receptors gates) and the tolerance to (reduced immunity) foreign nucleic acids. In conjunction, this can be considered a yet unknown molecular mechanism forcing bacterial evolution.

Putative small RNAs controlling detoxification of industrial cyanide-containing wastewaters by Pseudomonas pseudoalcaligenes CECT5344

The alkaliphilic bacterium Pseudomonas pseudoalcaligenes CECT5344 uses free cyanide and several metal−cyanide complexes as the sole nitrogen source and tolerates high concentrations of metals like copper, zinc and iron, which are present in the jewelry wastewaters. To understand deeply the regulatory mechanisms involved in the transcriptional regulation of cyanide-containing wastewaters detoxification by P. pseudoalcaligenes CECT5344, RNA-Seq has been performed from cells cultured with a cyanide-containing jewelry wastewater, sodium cyanide or ammonium chloride as the sole nitrogen source. Small RNAs (sRNAs) that may have potential regulatory functions under cyanotrophic conditions were identified. In total 20 sRNAs were identified to be differentially expressed when compared the jewelry residue versus ammonium as nitrogen source, 16 of which could be amplified successfully by RT-PCR. As predicted targets of these 16 sRNAs were several components of the nit1C gene cluster encoding the nitrilase NitC essential for cyanide assimilation, the cioAB gene cluster that codes for the cyanide-insensitive cytochrome bd-type terminal oxidase, the medium length-polyhydroxyalkanoates (ml-PHAs) gene cluster, and gene clusters related with a global nitrogen limitation response like those coding for glutamine synthase and urease. Other targets were non-clustered genes (or their products) involved in metal resistance and iron acquisition, such as metal extrusion systems and the ferric uptake regulatory (Fur) protein, and a GntR-like regulatory family member probably involved in the regulation of the cyanide assimilation process in the strain CECT5344. Induction of genes targeted by sRNAs in the jewelry residue was demonstrated by qRT-PCR.

A Cyanide-Induced 3-Cyanoalanine Nitrilase in the Cyanide-Assimilating Bacterium Pseudomonas pseudoalcaligenes Strain CECT 5344

Pseudomonas pseudoalcaligenes CECT 5344 is a bacterium able to assimilate cyanide as a sole nitrogen source. Under this growth condition, a 3-cyanoalanine nitrilase enzymatic activity was induced. This activity was encoded by nit4, one of the four nitrilase genes detected in the genome of this bacterium, and its expression in Escherichia coli enabled the recombinant strain to fully assimilate 3-cyanoalanine. P. pseudoalcaligenes CECT 5344 showed a weak growth level with 3-cyanoalanine as the N source, unless KCN was also added. Moreover, a nit4 knockout mutant of P. pseudoalcaligenes CECT 5344 became severely impaired in its ability to grow with 3-cyanoalanine and cyanide as nitrogen sources. The native enzyme expressed in E. coli was purified up to electrophoretic homogeneity and biochemically characterized. Nit4 seems to be specific for 3-cyanoalanine, and the amount of ammonium derived from the enzymatic activity doubled in the presence of exogenously added asparaginase activity, which demonstrated that the Nit4 enzyme had both 3-cyanoalanine nitrilase and hydratase activities. The nit4 gene is located downstream of the cyanide resistance transcriptional unit containing cio1 genes, whose expression levels are under the positive control of cyanide. Real-time PCR experiments revealed that nit4 expression was also positively regulated by cyanide in both minimal and LB media. These results suggest that this gene cluster including cio1 and nit4 could be involved both in cyanide resistance and in its assimilation by P. pseudoalcaligenes CECT 5344.IMPORTANCE Cyanide is a highly toxic molecule present in some industrial wastes due to its application in several manufacturing processes, such as gold mining and the electroplating industry. The biodegradation of cyanide from contaminated wastes could be an attractive alternative to physicochemical treatment. P. pseudoalcaligenes CECT 5344 is a bacterial strain able to assimilate cyanide under alkaline conditions, thus avoiding its volatilization as HCN. This paper describes and characterizes an enzyme (Nit4) induced by cyanide that is probably involved in cyanide assimilation. The biochemical characterization of Nit4 provides a segment for building a cyanide assimilation pathway in P. pseudoalcaligenes This information could be useful for understanding, and hopefully improving, the mechanisms involved in bacterial cyanide biodegradation and its application in the treatment of cyanide-containing wastes.

Quantitative proteomic analysis of Pseudomonas pseudoalcaligenes CECT5344 in response to industrial cyanide-containing wastewaters using Liquid Chromatography-Mass Spectrometry/Mass Spectrometry (LC-MS/MS)

Biological treatments to degrade cyanide are a powerful technology for cyanide removal from industrial wastewaters. It has been previously demonstrated that the alkaliphilic bacterium Pseudomonas pseudoalcaligenes CECT5344 is able to use free cyanide and several metal−cyanide complexes as the sole nitrogen source. In this work, the strain CECT5344 has been used for detoxification of the different chemical forms of cyanide that are present in alkaline wastewaters from the jewelry industry. This liquid residue also contains large concentrations of metals like iron, copper and zinc, making this wastewater even more toxic. To elucidate the molecular mechanisms involved in the bioremediation process, a quantitative proteomic analysis by LC-MS/MS has been carried out in P. pseudoalcaligenes CECT5344 cells grown with the jewelry residue as sole nitrogen source. Different proteins related to cyanide and cyanate assimilation, as well as other proteins involved in transport and resistance to metals were induced by the cyanide-containing jewelry residue. GntR-like regulatory proteins were also induced by this industrial residue and mutational analysis revealed that GntR-like regulatory proteins may play a role in the regulation of cyanide assimilation in P. pseudoalcaligenes CECT5344. The strain CECT5344 has been used in a batch reactor to remove at pH 9 the different forms of cyanide present in industrial wastewaters from the jewelry industry (0.3 g/L, ca. 12 mM total cyanide, including both free cyanide and metal−cyanide complexes). This is the first report describing the biological removal at alkaline pH of such as elevated concentration of cyanide present in a heterogeneous mixture from an industrial source.

Biodegradation of cyanide wastes from mining and jewellery industries

Cyanide, one of the known most toxic chemicals, is widely used in mining and jewellery industries for gold extraction and recovery from crushed ores or electroplating residues. Cyanide toxicity occurs because this compound strongly binds to metals, inactivating metalloenzymes such as cytochrome c oxidase. Despite the toxicity of cyanide, cyanotrophic microorganisms such as the alkaliphilic bacterium Pseudomonas pseudoalcaligenes CECT5344 may use cyanide and its derivatives as a nitrogen source for growth, making biodegradation of cyanurated industrial waste possible. Genomic, transcriptomic and proteomic techniques applied to cyanide biodegradation ('cyan-omics') provide a holistic view that increases the global insights into the genetic background of cyanotrophic microorganisms that could be used for biodegradation of industrial cyanurated wastes and other biotechnological applications.

Deciphering Cyanide-Degrading Potential of Bacterial Community Associated with the Coking Wastewater Treatment Plant with a Novel Draft Genome

Biotreatment processes fed with coking wastewater often encounter insufficient removal of pollutants, such as ammonia, phenols, and polycyclic aromatic hydrocarbons (PAHs), especially for cyanides. However, only a limited number of bacterial species in pure cultures have been confirmed to metabolize cyanides, which hinders the improvement of these processes. In this study, a microbial community of activated sludge enriched in a coking wastewater treatment plant was analyzed using 454 pyrosequencing and Illumina sequencing to characterize the potential cyanide-degrading bacteria. According to the classification of these pyro-tags, targeting V3/V4 regions of 16S rRNA gene, half of them were assigned to the family Xanthomonadaceae, implying that Xanthomonadaceae bacteria are well-adapted to coking wastewater. A nearly complete draft genome of the dominant bacterium was reconstructed from metagenome of this community to explore cyanide metabolism based on analysis of the genome. The assembled 16S rRNA gene from this draft genome showed that this bacterium was a novel species of Thermomonas within Xanthomonadaceae, which was further verified by comparative genomics. The annotation using KEGG and Pfam identified genes related to cyanide metabolism, including genes responsible for the iron-harvesting system, cyanide-insensitive terminal oxidase, cyanide hydrolase/nitrilase, and thiosulfate:cyanide transferase. Phylogenetic analysis showed that these genes had homologs in previously identified genomes of bacteria within Xanthomonadaceae and even presented similar gene cassettes, thus implying an inherent cyanide-decomposing potential. The findings of this study expand our knowledge about the bacterial degradation of cyanide compounds and will be helpful in the remediation of cyanides contamination.

Pseudomonas pseudoalcaligenes CECT5344, a cyanide-degrading bacterium with by-product (polyhydroxyalkanoates) formation capacity

BACKGROUND

Cyanide is one of the most toxic chemicals produced by anthropogenic activities like mining and jewelry industries, which generate wastewater residues with high concentrations of this compound. Pseudomonas pseudoalcaligenes CECT5344 is a model microorganism to be used in detoxification of industrial wastewaters containing not only free cyanide (CN(-)) but also cyano-derivatives, such as cyanate, nitriles and metal-cyanide complexes. Previous in silico analyses suggested the existence of genes putatively involved in metabolism of short chain length (scl-) and medium chain length (mcl-) polyhydroxyalkanoates (PHAs) located in three different clusters in the genome of this bacterium. PHAs are polyesters considered as an alternative of petroleum-based plastics. Strategies to optimize the bioremediation process in terms of reducing the cost of the production medium are required.

RESULTS

In this work, a biological treatment of the jewelry industry cyanide-rich wastewater coupled to PHAs production as by-product has been considered. The functionality of the pha genes from P. pseudoalcaligenes CECT5344 has been demonstrated. Mutant strains defective in each proposed PHA synthases coding genes (Mpha(-), deleted in putative mcl-PHA synthases; Spha(-), deleted in the putative scl-PHA synthase) were generated. The accumulation and monomer composition of scl- or mcl-PHAs in wild type and mutant strains were confirmed by gas chromatography-mass spectrometry (GC-MS). The production of PHAs as by-product while degrading cyanide from the jewelry industry wastewater was analyzed in batch reactor in each strain. The wild type and the mutant strains grew at similar rates when using octanoate as the carbon source and cyanide as the sole nitrogen source. When cyanide was depleted from the medium, both scl-PHAs and mcl-PHAs were detected in the wild-type strain, whereas scl-PHAs or mcl-PHAs were accumulated in Mpha(-) and Spha(-), respectively. The scl-PHAs were identified as homopolymers of 3-hydroxybutyrate and the mcl-PHAs were composed of 3-hydroxyoctanoate and 3-hydroxyhexanoate monomers.

CONCLUSIONS

These results demonstrated, as proof of concept, that talented strains such as P. pseudoalcaligenes might be applied in bioremediation of industrial residues containing cyanide, while concomitantly generate by-products like polyhydroxyalkanoates. A customized optimization of the target bioremediation process is required to gain benefits of this type of approaches.

Whole genome sequences of a free-living Pseudomonas sp. strain ML96 isolated from a freshwater Maar Lake

A free living freshwater Pseudomonas strain ML96 was isolated from the Huguangyan Maar Lake in southern China. Genome sequencing of strain ML96 revealed a 4.7 Mb long draft genome consisting of 47 contigs with a G+C content of 64.8%. Its 16S and 23S rRNA gene sequences were 99.8% and 99.3% identical to those of its closest relative, Pseudomonas alcaligenes NBRC 14159, respectively. ML96's genome shared 73% orthologous CDS (3256/4457) with the genome of NBRC 14159. Comparative genomics analysis provide further insight into the diversity and evolution of aquatic Pseudomonas species, which may help enhance our understanding of this both environmentally and medically important group of bacteria.

Comparative genome analyses of Serratia marcescens FS14 reveals its high antagonistic potential

S. marcescens FS14 was isolated from an Atractylodes macrocephala Koidz plant that was infected by Fusarium oxysporum and showed symptoms of root rot. With the completion of the genome sequence of FS14, the first comprehensive comparative-genomic analysis of the Serratia genus was performed. Pan-genome and COG analyses showed that the majority of the conserved core genes are involved in basic cellular functions, while genomic factors such as prophages contribute considerably to genome diversity. Additionally, a Type I restriction-modification system, a Type III secretion system and tellurium resistance genes are found in only some Serratia species. Comparative analysis further identified that S. marcescens FS14 possesses multiple mechanisms for antagonism against other microorganisms, including the production of prodigiosin, bacteriocins, and multi-antibiotic resistant determinants as well as chitinases. The presence of two evolutionarily distinct Type VI secretion systems (T6SSs) in FS14 may provide further competitive advantages for FS14 against other microbes. To our knowledge, this is the first report of comparative analysis on T6SSs in the genus, which identifies four types of T6SSs in Serratia spp.. Competition bioassays of FS14 against the vital plant pathogenic bacterium Ralstonia solanacearum and fungi Fusarium oxysporum and Sclerotinia sclerotiorum were performed to support our genomic analyses, in which FS14 demonstrated high antagonistic activities against both bacterial and fungal phytopathogens.

Complete genome sequence of the cyanide-degrading bacterium Pseudomonas pseudoalcaligenes CECT5344

Pseudomonas pseudoalcaligenes CECT5344, a Gram-negative bacterium isolated from the Guadalquir River (Córdoba, Spain), is able to utilize different cyano-derivatives. Here, the complete genome sequence of P. pseudoalcaligenes CECT5344 harboring a 4,686,340bp circular chromosome encoding 4513 genes and featuring a GC-content of 62.34% is reported. Necessarily, remaining gaps in the genome had to be closed by assembly of few long reads obtained from PacBio single molecule real-time sequencing. Here, the first complete genome sequence for the species P. pseudoalcaligenes is presented.

A novel cyanide-inducible gene cluster helps protect Pseudomonas aeruginosa from cyanide

Pseudomonas aeruginosa produces the toxic secondary metabolite hydrogen cyanide (HCN) at high cell population densities and low aeration. Here, we investigated the impact of HCN as a signal in cell-cell communication by comparing the transcriptome of the wild-type strain PAO1 to that of an HCN-negative mutant under cyanogenic conditions. HCN repressed four genes and induced 12 genes. While the individual functions of these genes are unknown, with one exception (i.e. a ferredoxin-dependent reductase), a highly inducible six-gene cluster (PA4129-PA4134) was found to be crucial for protection of P. aeruginosa from external HCN intoxication. A double mutant deleted for PA4129-PA4134 and cioAB (encoding cyanide-insensitive oxidase) did not grow with 100 μM KCN, whereas the corresponding single mutants were essentially unaffected, suggesting a synergistic action of the PA4129-PA4134 gene products and cyanide-insensitive oxidase.