Enhanced Oxygen Availability Improves Liver-specific Functions of the AMC Bioartificial Liver

Limited oxygen in standard cell culture alters metabolism and function of differentiated cells

The in vitro oxygen microenvironment profoundly affects the capacity of cell cultures to model physiological and pathophysiological states. Cell culture is often considered to be hyperoxic, but pericellular oxygen levels, which are affected by oxygen diffusivity and consumption, are rarely reported. Here, we provide evidence that several cell types in culture actually experience local hypoxia, with important implications for cell metabolism and function. We focused initially on adipocytes, as adipose tissue hypoxia is frequently observed in obesity and precedes diminished adipocyte function. Under standard conditions, cultured adipocytes are highly glycolytic and exhibit a transcriptional profile indicative of physiological hypoxia. Increasing pericellular oxygen diverted glucose flux toward mitochondria, lowered HIF1α activity, and resulted in widespread transcriptional rewiring. Functionally, adipocytes increased adipokine secretion and sensitivity to insulin and lipolytic stimuli, recapitulating a healthier adipocyte model. The functional benefits of increasing pericellular oxygen were also observed in macrophages, hPSC-derived hepatocytes and cardiac organoids. Our findings demonstrate that oxygen is limiting in many terminally-differentiated cell types, and that considering pericellular oxygen improves the quality, reproducibility and translatability of culture models.

A 3D Cell Culture Organ-on-a-Chip Platform With a Breathable Hemoglobin Analogue Augments and Extends Primary Human Hepatocyte Functions in vitro

Remarkable advances in three-dimensional (3D) cell cultures and organ-on-a-chip technologies have opened the door to recapitulate complex aspects of human physiology, pathology, and drug responses in vitro. The challenges regarding oxygen delivery, throughput, assay multiplexing, and experimental complexity are addressed to ensure that perfused 3D cell culture organ-on-a-chip models become a routine research tool adopted by academic and industrial stakeholders. To move the field forward, we present a throughput-scalable organ-on-a-chip insert system that requires a single tube to operate 48 statistically independent 3D cell culture organ models. Then, we introduce in-well perfusion to circumvent the loss of cell signaling and drug metabolites in otherwise one-way flow of perfusate. Further, to augment the relevancy of 3D cell culture models in vitro, we tackle the problem of oxygen transport by blood using, for the first time, a breathable hemoglobin analog to improve delivery of respiratory gases to cells, because in vivo approximately 98% of oxygen delivery to cells takes place via reversible binding to hemoglobin. Next, we show that improved oxygenation shifts cellular metabolic pathways toward oxidative phosphorylation that contributes to the maintenance of differentiated liver phenotypes in vitro. Lastly, we demonstrate that the activity of cytochrome P450 family of drug metabolizing enzymes is increased and prolonged in primary human hepatocytes cultured in 3D compared to two-dimensional (2D) cell culture gold standard with important ramifications for drug metabolism, drug-drug interactions and pharmacokinetic studies in vitro.

Oxygenation Profiles of Human Blood, Cell Culture Medium, and Water for Perfusion of 3D-Bioprinted Tissues using the FABRICA Bioreactor Platform

Persistent and saturated oxygen distribution from perfusion media (i.e., blood, or cell culture media) to cells within cell-dense, metabolically-active biofabricated tissues is required to keep them viable. Improper or poor oxygen supply to cells within the tissue bulk severely limits the tissue culturing potential of many bioreactors. We added an oxygenator module to our modular FABRICA bioreactor in order to provide stable oxygenation to biofabricated tissues during culture. In this proof of concept study of an oxygenated and perfused bioreactor, we characterized the oxygenation of water, cell culture medium, and human blood in the FABRICA as functions of augmenting vacuum (air inlet) pressure, perfusion (volumetric flow) rate, and tubing/oxygenator components. The mean oxygen levels for water and cell culture media were 27.7 ± 2.1% and 27.6 ± 4.1%, respectively. The mean oxygen level for human blood was 197.0 ± 90.0 mmHg, with near-physiologic levels achieved with low-permeability PharMed tubing alone (128.0 ± 14.0 mmHg). Hematologic values pre- and post-oxygenation, respectively were (median ± IQR): Red blood cell: 6.0 ± 0.5 (10⁶/μL) and 6.5 ± 0.4 (10⁶/μL); Hemoglobin: 17.5 ± 1.2 g/dL and 19.2 ± 3.0 g/dL; and Hematocrit: 56.7 ± 2.4% and 61.4 ± 7.5%. The relative stability of the hematologic parameters indicates that blood function and thus blood cell integrity were maintained throughout oxygenation. Already a versatile research tool, the now oxygenated FABRICA provides easy-to-implement, in vivo-like perfusion and stable oxygenation culture conditions in vitro semi-independently of one another, which means the bioreactor has the potential to serve as a platform for investigating the behavior of 3D tissue models (regardless of biofabrication method), performing drug toxicity-testing, and testing pharmaceutical efficacy/safety.

Liver Bioreactor Design Issues of Fluid Flow and Zonation, Fibrosis, and Mechanics: A Computational Perspective

Tissue engineering, with the goal of repairing or replacing damaged tissue and organs, has continued to make dramatic science-based advances since its origins in the late 1980’s and early 1990’s. Such advances are always multi-disciplinary in nature, from basic biology and chemistry through physics and mathematics to various engineering and computer fields. This review will focus its attention on two topics critical for tissue engineering liver development: (a) fluid flow, zonation, and drug screening, and (b) biomechanics, tissue stiffness, and fibrosis, all within the context of 3D structures. First, a general overview of various bioreactor designs developed to investigate fluid transport and tissue biomechanics is given. This includes a mention of computational fluid dynamic methods used to optimize and validate these designs. Thereafter, the perspective provided by computer simulations of flow, reactive transport, and biomechanics responses at the scale of the liver lobule and liver tissue is outlined, in addition to how bioreactor-measured properties can be utilized in these models. Here, the fundamental issues of tortuosity and upscaling are highlighted, as well as the role of disease and fibrosis in these issues. Some idealized simulations of the effects of fibrosis on lobule drug transport and mechanics responses are provided to further illustrate these concepts. This review concludes with an outline of some practical applications of tissue engineering advances and how efficient computational upscaling techniques, such as dual continuum modeling, might be used to quantify the transition of bioreactor results to the full liver scale.

Oxygen drives hepatocyte differentiation and phenotype stability in liver cell lines

The in vitro generation of terminally differentiated hepatocytes is an unmet need. We investigated the contribution of oxygen concentration to differentiation in human liver cell lines HepaRG and C3A. HepaRG cells were cultured under hypoxia (5%O2), normoxia (21%O2) or hyperoxia (40%O2). Cultures were analysed for hepatic functions, gene transcript levels, and protein expression of albumin, hepatic transcription factor CEBPα, hepatic progenitor marker SOX9, and hypoxia inducible factor (HIF)1α. C3A cells were analysed after exposure to normoxia or hyperoxia. In hyperoxic HepaRG cultures, urea cycle activity, bile acid synthesis, CytochromeP450 3A4 (CYP3A4) activity and ammonia elimination were 165-266% increased. These effects were reproduced in C3A cells. Whole transcriptome analysis of HepaRG cells revealed that 240 (of 23.223) probes were differentially expressed under hyperoxia, with an overrepresentation of genes involved in hepatic differentiation, metabolism and extracellular signalling. Under hypoxia, CYP3A4 activity and ammonia elimination were inhibited almost completely and 5/5 tested hepatic genes and 2/3 tested hepatic transcription factor genes were downregulated. Protein expression of SOX9 and HIF1α was strongly positive in hypoxic cultures, variable in normoxic cultures and predominantly negative in hyperoxic cultures. Conversely, albumin and CEBPα expression were highest in hyperoxic cultures. HepaRG cells that were serially passaged under hypoxia maintained their capacity to differentiate under normoxia, in contrast to cells passaged under normoxia. Hyperoxia increases hepatocyte differentiation in HepaRG and C3A cells. In contrast, hypoxia maintains stem cell characteristics and inhibits hepatic differentiation of HepaRG cells, possibly through the activity of HIF1α.

AMC-Bio-Artificial Liver culturing enhances mitochondrial biogenesis in human liver cell lines: The role of oxygen, medium perfusion and 3D configuration

BACKGROUND

Human liver cell lines, like HepaRG and C3A, acquire higher functionality when cultured in the AMC-Bio-Artificial Liver (AMC-BAL). The three main differences between BAL and monolayer culture are the oxygenation (40% vs 20%O₂), dynamic vs absent medium perfusion and 3D vs 2D configuration. Here, we investigated the background of the differences between BAL-cultures and monolayers.

METHODS

We performed whole-genome microarray analysis on HepaRG monolayer and BAL-cultures. Next, mitochondrial biogenesis was studied in monolayer and BAL-cultures of HepaRG and C3A. The driving forces for mitochondrial biogenesis by BAL-culturing were investigated in representative culture models differing in oxygenation level, medium flow or 2D vs 3D configuration.

RESULTS

Gene-sets related to mitochondrial energy metabolism were most prominently up-regulated in HepaRG-BAL vs monolayer cultures. This was confirmed by a 2.4-fold higher mitochondrial abundance with increased expression of mitochondrial OxPhos complexes. Moreover, the transcript levels of mitochondria-encoded genes were up to 3.6-fold induced and mitochondrial membrane potential activity was 8.3-fold increased in BAL vs monolayers. Culturing with 40% O₂, dynamic medium flow and/or in 3D increased the mitochondrial abundance and expression of mitochondrial complexes vs standard monolayer culturing. The stimulatory effect of the BAL culture on mitochondrial biogenesis was confirmed in C3A cells in which mitochondrial abundance increased 2.2-fold with induction of mitochondria-encoded genes.

CONCLUSIONS AND GENERAL SIGNIFICANCE

The increased functionality of liver cell lines upon AMC-BAL culturing is associated with increased mitochondrial biogenesis. High oxygenation, medium perfusion and 3D configuration contribute to the up-regulation of the mitochondrial biogenesis.

Bioreactor technologies to support liver function in vitro

Liver is a central nexus integrating metabolic and immunologic homeostasis in the human body, and the direct or indirect target of most molecular therapeutics. A wide spectrum of therapeutic and technological needs drives efforts to capture liver physiology and pathophysiology in vitro, ranging from prediction of metabolism and toxicity of small molecule drugs, to understanding off-target effects of proteins, nucleic acid therapies, and targeted therapeutics, to serving as disease models for drug development. Here we provide perspective on the evolving landscape of bioreactor-based models to meet old and new challenges in drug discovery and development, emphasizing design challenges in maintaining long-term liver-specific function and how emerging technologies in biomaterials and microdevices are providing new experimental models.

Increased hepatic functionality of the human hepatoma cell line HepaRG cultured in the AMC bioreactor

The clinical application of a bioartificial liver (BAL) depends on the availability of a human cell source with high hepatic functionality, such as the human hepatoma cell line HepaRG. This cell line has demonstrated high hepatic functionality, but the effect of BAL culture on its functionality in time is not known. Therefore, we studied the characteristics of the HepaRG-AMC-BAL over time, and compared the functionality of the HepaRG-AMC-BAL with monolayer cultures of HepaRG cells, normalized for protein (bioactive mass) and DNA (cell number). Histological analysis of 14-day-old BALs demonstrated functional heterogeneity similar to that of monolayer cultures. Hepatic functionality of the HepaRG-AMC-BALs increased during 2-3 weeks of culture. The majority of the measured protein-normalized hepatic functions were already higher in day 14 BAL cultures compared to monolayer cultures, including ammonia elimination (3.2-fold), urea production (1.5-fold), conversion of (15)N-ammonia into (15)N-urea (1.4-fold), and cytochrome P450 3A4 activity (7.9-fold). Lactate production in monolayer cultures switched into lactate consumption in the BAL cultures, a hallmark of primary hepatocytes. When normalized for DNA, only cytochrome P450 3A4 activity was 2.5-fold higher in the BAL cultures compared to monolayer cultures and lactate production switched to consumption, whereas urea production and (15)N-urea production were 1.5- to 2-fold lower. The different outcomes for protein and DNA normalized functions probably relate to a smaller cell volume of HepaRG cells when cultured in the AMC-BAL. Cell damage was 4-fold lower in day 14 BAL cultures compared to monolayer cultures. Transcript levels of cytochrome P450 1A2, 2B6, 3A4 and 3A7 genes and of regulatory genes hepatic nuclear factor 4α and pregnane X receptor increased in time in BAL cultures and reached higher levels than in monolayer cultures. Lastly, metabolism of amino acids, particularly the alanine consumption and ornithine production of HepaRG-AMC-BALs more resembled that of primary hepatocytes than monolayer HepaRG cultures. We conclude therefore that BAL culture of HepaRG cells increases its hepatic functionality, particularly when normalized for biomass, both over time, and compared to monolayer, and this is associated with a reduction in cell damage, upregulation of both regulatory and structural hepatic genes, and changes in amino-acid metabolism. These results underline the potential of HepaRG cells for BAL application.

Nanostructured self-assembling peptides as a defined extracellular matrix for long-term functional maintenance of primary hepatocytes in a bioartificial liver modular device

Much effort has been directed towards the optimization of the capture of in vivo hepatocytes from their microenvironment. Some methods of capture include an ex vivo cellular model in a bioreactor based liver module, a micropatterned module, a microfluidic 3D chip, coated plates, and other innovative approaches for the functional maintenance of primary hepatocytes. However, none of the above methods meet US Food and Drug Administration (FDA) guidelines, which recommend and encourage that the duration of a toxicity assay of a drug should be a minimum of 14 days, to a maximum of 90 days for a general toxicity assay. Existing innovative reports have used undefined extracellular matrices like matrigel, rigid collagen, or serum supplementations, which are often problematic, unacceptable in preclinical and clinical applications, and can even interfere with experimental outcomes. We have overcome these challenges by using integrated nanostructured self-assembling peptides and a special combination of growth factors and cytokines to establish a proof of concept to mimic the in vivo hepatocyte microenvironment pattern in vitro for predicting the in vivo drug hepatotoxicity in a scalable bioartificial liver module. Hepatocyte functionality (albumin, urea) was measured at days 10, 30, 60, and 90 and we observed stable albumin secretion and urea function throughout the culture period. In parallel, drug metabolizing enzyme biomarkers such as ethoxyresorufin-O-deethylase, the methylthiazol tetrazolium test, and the lactate dehydrogenase test were carried out at days 10, 30, 60, and 90. We noticed excellent mitochondrial status and membrane stability at 90 days of culture. Since alpha glutathione S-transferase (GST) is highly sensitive and a specific marker of hepatocyte injury, we observed significantly low alpha GST levels on all measured days (10, 30, 60, and 90). Finally, we performed the image analysis of mitochondria-cultured hepatocytes at day 90 in different biophysical parameters using confocal microscopy. We applied an automatic algorithm-based method for 3D visualization to show the classic representation of the mitochondrial distribution in double hepatocytes. An automated morphological measurement was conducted on the mitochondrial distribution in the cultured hepatocytes. Our proof of concept of a scalable bioartificial liver modular device meets FDA guidelines and may function as an alternative model of animal experimentation for pharmacological and toxicological studies involving drug metabolism, enzyme induction, transplantation, viral hepatitis, hepatocyte regeneration, and can also be used in other existing bioreactor modules for long-term culture for up to 90 days or more.

Phase 1 and phase 2 drug metabolism and bile acid production of HepaRG cells in a bioartificial liver in absence of dimethyl sulfoxide

The human liver cell line HepaRG has been recognized as a promising source for in vitro testing of metabolism and toxicity of compounds. However, currently the hepatic differentiation of these cells relies on exposure to dimethylsulfoxide (DMSO), which, as a side effect, has a cytotoxic effect and represses an all-round hepatic functionality. The AMC-bioartificial liver (AMC-BAL) is a three-dimensional bioreactor that has previously been shown to upregulate various liver functions of cultured cells. We therefore cultured HepaRG cells in the AMC-BAL without DMSO and characterized the drug metabolism. Within 14 days of culture, the HepaRG-AMC-BALs contained highly polarized viable liver-like tissue with heterogeneous expression of CYP3A4. We found a substantial metabolism of the tested substrates, ranging from 26% (UDP-glucuronosyltransferase 1A1), 47% (CYP3A4), to 240% (CYP2C9) of primary human hepatocytes. The CYP3A4 activity could be induced 2-fold by rifampicin, whereas CYP2C9 activity remained equally high. The HepaRG-AMC-BAL secreted bile acids at 43% the rate of primary human hepatocytes and demonstrated hydroxylation, conjugation, and transport of bile salts. Concluding, culturing HepaRG cells in the AMC-BAL yields substantial phase 1 and phase 2 drug metabolism, while maintaining high viability, rendering DMSO addition superfluous for the promotion of drug metabolism. Therefore, AMC-BAL culturing makes the HepaRG cells more suitable for testing metabolism and toxicity of drugs.

Perfusion flow rate substantially contributes to the performance of the HepaRG-AMC-bioartificial liver

Bioartificial livers (BALs) are bioreactors containing liver cells that provide extracorporeal liver support to liver-failure patients. Theoretically, the plasma perfusion flow rate through a BAL is an important determinant of its functionality. Low flow rates can limit functionality due to limited substrate availability, and high flow rates can induce cell damage. This hypothesis was tested by perfusing the AMC-BAL loaded with the liver cell line HepaRG at four different medium flow rates (0.3, 1.5, 5, and 10 mL/min). Hepatic functions ammonia elimination, urea production, lactate consumption, and 6β-hydroxylation of testosterone showed 2-20-fold higher rates at 5 mL/min compared to 0.3 mL/min, while cell damage remained stable. However, at 10 mL/min cell damage was twofold higher, and maximal hepatic functionality was not changed, except for an increase in lactate elimination. On the other hand, only a low flow rate of 0.3 mL/min allowed for an accurate measurement of the ammonia and lactate mass balance across the bioreactor, which is useful for monitoring the BAL's condition during treatment. These results show that (1) the functionality of a BAL highly depends on the perfusion rate; (2) there is a universal optimal flow rate based on various function and cell damage parameters (5 mL/min for HepaRG-BAL); and (3) in the current set-up the mass balance of substrate, metabolite, or cell damage markers between in-and out-flow of the bioreactor can only be determined at a suboptimal, low, perfusion rate (0.3 mL/min for HepaRG-BAL).

Liver progenitor cell line HepaRG differentiated in a bioartificial liver effectively supplies liver support to rats with acute liver failure

A major roadblock to the application of bioartificial livers is the need for a human liver cell line that displays a high and broad level of hepatic functionality. The human bipotent liver progenitor cell line HepaRG is a promising candidate in this respect, for its potential to differentiate into hepatocytes and bile duct cells. Metabolism and synthesis of HepaRG monolayer cultures is relatively high and their drug metabolism can be enhanced upon treatment with 2% dimethyl sulfoxide (DMSO). However, their potential for bioartificial liver application has not been assessed so far. Therefore, HepaRG cells were cultured in the Academic Medical Center bioartificial liver (AMC-BAL) with and without DMSO and assessed for their hepatic functionality in vitro and in a rat model of acute liver failure. HepaRG-AMC-BALs cultured without DMSO eliminated ammonia and lactate, and produced apolipoprotein A-1 at rates comparable to freshly isolated hepatocytes. Cytochrome P450 3A4 transcript levels and activity were high with 88% and 37%, respectively, of the level of hepatocytes. DMSO treatment of HepaRG-AMC-BALs reduced the cell population and the abovementioned functions drastically. Therefore, solely HepaRG-AMC-BALs cultured without DMSO were tested for efficacy in rats with acute liver failure (n = 6). HepaRG-AMC-BAL treatment increased survival time of acute liver failure rats ∼50% compared to acellular-BAL treatment. Moreover, HepaRG-AMC-BAL treatment decreased the progression of hepatic encephalopathy, kidney failure, and ammonia accumulation. These results demonstrate that the HepaRG-AMC-BAL is a promising bioartificial liver for clinical application.

Liver regenerative medicine: advances and challenges

Liver transplantation is the standard care for many end-stage liver diseases. However, donor organs are scarce and some people succumb to liver failure before a donor is found. Liver regenerative medicine is a special interdisciplinary field of medicine focused on the development of new therapies incorporating stem cells, gene therapy and engineered tissues in order to repair or replace the damaged organ. In this review we consider the emerging progress achieved in the hepatic regenerative medicine within the last decade. The review starts with the characterization of liver organogenesis, fetal and adult stem/progenitor cells. Then, applications of primary hepatocytes, embryonic and adult (mesenchymal, hematopoietic and induced pluripotent) stem cells in cell therapy of liver diseases are considered. Current advances and challenges in producing mature hepatocytes from stem/progenitor cells are discussed. A section about hepatic tissue engineering includes consideration of synthetic and natural biomaterials in engineering scaffolds, strategies and achievements in the development of 3D bioactive matrices and 3D hepatocyte cultures, liver microengineering, generating bioartificial liver and prospects for fabrication of the bioengineered liver.

Three dimensional cultures of rat liver cells using a natural self-assembling nanoscaffold in a clinically relevant bioreactor for bioartificial liver construction

Till date, no bioartificial liver (BAL) procedure has obtained FDA approval or widespread clinical acceptance, mainly because of multifactorial limitations such as the use of microscale or undefined biomaterials, indirect and lower oxygenation levels in liver cells, short-term undesirable functions, and a lack of 3D interaction of growth factor/cytokine signaling in liver cells. To overcome preclinical limitations, primary rat liver cells were cultured on a naturally self-assembling peptide nanoscaffold (SAPN) in a clinically relevant bioreactor for up to 35 days, under 3D interaction with suitable growth factors and cytokine signaling agents, alone or combination (e.g., Group I: EPO, Group II: Activin A, Group III: IL-6, Group IV: BMP-4, Group V: BMP4 + EPO, Group VI: EPO + IL-6, Group VII: BMP4 + IL-6, Group VIII: Activin A + EPO, Group IX: IL-6 + Activin A, Group X: Activin A + BMP4, Group XI: EPO + Activin A + BMP-4 + IL-6 + HGF, and Group XII: Control). Major liver specific functions such as albumin secretion, urea metabolism, ammonia detoxification, phase contrast microscopy, immunofluorescence of liver specific markers (Albumin and CYP3A1), mitochondrial status, glutamic oxaloacetic transaminase (GOT) activity, glutamic pyruvic transaminase (GPT) activity, and cell membrane stability by the lactate dehydrogenase (LDH) test were also examined and compared with the control over time. In addition, we examined the drug biotransformation potential of a diazepam drug in a two-compartment model (cell matrix phase and supernatant), which is clinically important. This present study demonstrates an optimized 3D signaling/scaffolding in a preclinical BAL model, as well as preclinical drug screening for better drug development.

Normal atmospheric oxygen tension and the use of antioxidants improve hepatocyte spheroid viability and function

Hepatocyte spheroids have been proposed for drug metabolism studies and in bioartificial liver devices. However, the optimal conditions required to meet the aerobic demands of mitochondria-rich hepatocyte spheroids is not well studied. We hypothesized that an optimal concentration of oxygen could be identified and that the health of hepatocyte spheroids might be further improved by antioxidant therapy. Rat hepatocyte spheroids were maintained in suspension culture for 7 days under a mixture of 5% CO(2) plus O(2):N(2) to achieve fractional oxygen contents of 6%(C1), 21%(C2), 58%(C3), and 95%(C4). Spheroid health was assessed under each condition by vital staining, TEM, oxygen consumption, and mitochondrial counts. Hepatocyte differentiation was assessed by expression of 10 liver-related genes (HNF4a, HNF6, Cyp1A1, albumin, Nags, Cps1, Otc, Ass, Asl, Arg1). Functional markers (albumin and urea) were measured. The influence of oxygen tension and antioxidant treatment on the production of reactive oxygen species (ROS) was assessed by confocal microscopy. We observed that the hepatocyte spheroids were healthiest under normal atmospheric (C2) conditions with antioxidants ascorbic acid and L-carnitine. Cell death and reduced functionality of hepatocyte spheroids correlated with the formation of ROS. Normal atmospheric conditions provided the optimal oxygen tension for suspension culture of hepatocyte spheroids. The formation and deleterious effects of ROS were further reduced by adding antioxidants to the culture medium. These findings have direct application to development of the spheroid reservoir bioartificial liver and the use of hepatocyte spheroids in drug metabolism studies.

Protective effects of ACLF sera on metabolic functions and proliferation of hepatocytes co-cultured with bone marrow MSCs in vitro

AIM: To investigate whether the function of hepatocytes co-cultured with bone marrow mesenchymal stem cells (MSCs) could be maintained in serum from acute-on-chronic liver failure (ACLF) patients.

METHODS: Hepatocyte supportive functions and cytotoxicity of sera from 18 patients with viral hepatitis B-induced ACLF and 18 healthy volunteers were evaluated for porcine hepatocytes co-cultured with MSCs and hepatocyte mono-layered culture, respectively. Chemokine profile was also examined for the normal serum and liver failure serum.

RESULTS: Hepatocyte growth factor (HGF) and Tumor necrosis factor; tumor necrosis factor (TNF)-α were remarkably elevated in response to ACLF while epidermal growth factor (EGF) and VEGF levels were significantly decreased. Liver failure serum samples induced a higher detachment rate, lower viability and decreased liver support functions in the homo-hepatocyte culture. Hepatocytes co-cultured with MSCs could tolerate the cytotoxicity of the serum from ACLF patients and had similar liver support functions compared with the hepatocytes cultured with healthy human serum in vitro. In addition, co-cultured hepatocytes maintained a proliferative capability despite of the insult from liver failure serum.

CONCLUSION: ACLF serum does not impair the cell morphology, viability, proliferation and overall metabolic capacities of hepatocyte co-cultured with MSCs in vitro.

Bioartificial liver devices: Perspectives on the state of the art

Acute liver failure remains a significant cause of morbidity and mortality. Bioartificial liver (BAL) devices have been in development for more than 20 years. Such devices aim to temporarily take over the metabolic and excretory functions of the liver until the patients' own liver has recovered or a donor liver becomes available for transplant. The important issues include the choice of cell materials and the design of the bioreactor. Ideal BAL cell materials should be of good viability and functionality, easy to access, and exclude immunoreactive and tumorigenic cell materials. Unfortunately, the current cells in use in BAL do not meet these requirements. One of the challenges in BAL development is the improvement of current materials; another key point concerning cell materials is the coculture of different cells. The bioreactor is an important component of BAL, because it determines the viability and function of the hepatocytes within it. From the perspective of bioengineering, a successful and clinically effective bioreactor should mimic the structure of the liver and provide an in vivo-like microenvironment for the growth of hepatocytes, thereby maintaining the cells' viability and function to the maximum extent. One future trend in the development of the bioreactor is to improve the oxygen supply system. Another direction for future research on bioreactors is the application of biomedical materials. In conclusion, BAL is, in principle, an important therapeutic strategy for patients with acute liver failure, and may also be a bridge to liver transplantation. It requires further research and development, however, before it can enter clinical practice.

Stable overexpression of pregnane X receptor in HepG2 cells increases its potential for bioartificial liver application

To bridge patients with acute liver failure to transplantation or liver regeneration, a bioartificial liver (BAL) is urgently needed. A BAL consists of an extracorporeal bioreactor loaded with a bioactive mass that would preferably be of human origin and display high hepatic functionality, including detoxification. The human hepatoma cell line HepG2 exhibits many hepatic functions, but its detoxification function is low. In this study, we investigated whether stable overexpression of pregnane X receptor (PXR), a master regulator of diverse detoxification functions in the liver [eg, cytochrome P450 3A (CYP3A) activity], would increase the potential of HepG2 for BAL application. Stable overexpression was achieved by lentiviral expression of the human PXR gene, which yielded cell line cBAL119. In monolayer cultures of cBAL119 cells, PXR transcript levels increased 29-fold versus HepG2 cells. Upon activation of PXR by rifampicin, the messenger RNA levels of CYP3A4, CYP3A5, and CYP3A7 increased 49- to 213-fold versus HepG2 cells. According to reporter gene assays with different inducers, the highest increase in CYP3A4 promoter activity (131-fold) was observed upon induction with rifampicin. Inside BALs, the proliferation rates, as measured by the DNA content, were comparable between the 2 cell lines. The rate of testosterone 6beta-hydroxylation, a measure of CYP3A function inside BALs, increased 4-fold in cBAL119 BALs versus HepG2 BALs. Other functions, such as apolipoprotein A1 synthesis, urea synthesis, glucose consumption, and lactate production, remained unchanged or increased. Thus, stable PXR overexpression markedly increases the potential of HepG2 for BAL application.

Three-dimensional culture of human embryonic stem cell derived hepatic endoderm and its role in bioartificial liver construction

The liver carries out a range of functions essential for bodily homeostasis. The impairment of liver functions has serious implications and is responsible for high rates of patient morbidity and mortality. Presently, liver transplantation remains the only effective treatment, but donor availability is a major limitation. Therefore, artificial and bioartificial liver devices have been developed to bridge patients to liver transplantation. Existing support devices improve hepatic encephalopathy to a certain extent; however their usage is associated with side effects. The major hindrance in the development of bioartificial liver devices and cellular therapies is the limited availability of human hepatocytes. Moreover, primary hepatocytes are difficult to maintain and lose hepatic identity and function over time even with sophisticated tissue culture media. To overcome this limitation, renewable cell sources are being explored. Human embryonic stem cells are one such cellular resource and have been shown to generate a reliable and reproducible supply of human hepatic endoderm. Therefore, the use of human embryonic stem cell-derived hepatic endoderm in combination with tissue engineering has the potential to pave the way for the development of novel bioartificial liver devices and predictive drug toxicity assays.

Hepatic assist devices: will they ever be successful?

Hepatic assist remains elusive. Bioartificial livers (BALs), consisting of liver cells or tissue in a synthetic housing, have been promising but have not proven successful in clinical trials. Artificial livers that consist of sophisticated sorbents and membranes cannot support a failing liver but may shorten episodes of acute decompensation in patients with stable cirrhosis. These artificial livers are most likely to find a place as temporary support prior to transplantation. True liver support will require a BAL. This article proposes goals for making a clinically useful BAL, with attention to systems biology and potential sources of hepatocytes.

Transport advances in disposable bioreactors for liver tissue engineering

Acute liver failure (ALF) is a devastating diagnosis with an overall survival of approximately 60%. Liver transplantation is the therapy of choice for ALF patients but is limited by the scarce availability of donor organs. The prognosis of ALF patients may improve if essential liver functions are restored during liver failure by means of auxiliary methods because liver tissue has the capability to regenerate and heal. Bioartificial liver (BAL) approaches use liver tissue or cells to provide ALF patients with liver-specific metabolism and synthesis products necessary to relieve some of the symptoms and to promote liver tissue regeneration. The most promising BAL treatments are based on the culture of tissue engineered (TE) liver constructs, with mature liver cells or cells that may differentiate into hepatocytes to perform liver-specific functions, in disposable continuous-flow bioreactors. In fact, adult hepatocytes perform all essential liver functions. Clinical evaluations of the proposed BALs show that they are safe but have not clearly proven the efficacy of treatment as compared to standard supportive treatments. Ambiguous clinical results, the time loss of cellular activity during treatment, and the presence of a necrotic core in the cell compartment of many bioreactors suggest that improvement of transport of nutrients, and metabolic wastes and products to or from the cells in the bioreactor is critical for the development of therapeutically effective BALs. In this chapter, advanced strategies that have been proposed over to improve mass transport in the bioreactors at the core of a BAL for the treatment of ALF patients are reviewed.