Vascular assembly in natural and engineered tissues

A 3D-printed biphasic calcium phosphate scaffold loaded with platelet lysate/gelatin methacrylate to promote vascularization

3D-printed biphasic calcium phosphate (BCP) scaffolds show great clinical application potential in bone tissue engineering; however, vascularization of the scaffold is a crucial step for bone regeneration and is still difficult to be controlled. To enhance scaffold vascularization, a novel bioactive scaffold loaded with platelet lysate/gelatin methacrylate (PL/GelMA) in a BCP scaffold was proposed for promoting vascularization. The PL/GelMA/BCP scaffold was successfully prepared via digital light processing (DLP) printing and filled with PL/GelMA to promote the vascularization effect. In vitro evaluation indicated that human umbilical vein endothelial cells (HUVECs) adhered well on the PL/GelMA/BCP scaffold, and cell proliferation was significantly promoted by coculture with the scaffold. Moreover, a variety of growth factors (GFs) in the PL were detected which were slowly released from the scaffold to modulate the cell behaviour and promote the formation of blood vessel-like structures. Co-culturing with the PL/GelMA/BCP scaffold upregulated the expression of angiogenesis-related genes in cells. In vitro results showed that a higher capillary formation was also observed in PL/GelMA/BCP scaffolds implanted subcutaneously on the back of the rats. These results indicated that the vascularization ability of BCP was enhanced by filling it with PL/GelMA. The PL/GelMA/BCP scaffold has the potential to promote vascularization in tissue engineering.

Therapeutic application of adipose-derived stromal vascular fraction in diabetic foot

Diabetic foot is one of the severest complications of diabetes. In severe cases, this disease may be lead to amputation or even death due to secondary infection and ischemic necrosis. Since the ineffectiveness of traditional therapy, autologous stem cell transplantation has been used to treat diabetic foot. This simple, safe, and effective therapy is expected to be applied and promoted in the future.In this review, we described the detailed pathogenesis of diabetic foot and the common clinical treatments currently used. We also revealed vascular remodeling as the potential mechanism of therapeutic functions of adipose-derived stromal vascular fraction (SVF) in treating diabetic foot.

Fabrication of a self-assembled honeycomb nanofibrous scaffold to guide endothelial morphogenesis

Controlling angiogenesis within tissue engineered constructs remains a critical challenge, especially with regard to the guidance of pre-vascular network formation. Here, we aimed to regulate angiogenesis on a self-assembled honeycomb nanofibrous scaffold. Scaffolds with honeycombs patterns have several desirable properties for tissue engineering, including large surface area, high structural stability and good permeability. Furthermore, the honeycomb pattern resembles early vascular network formation. The self-assembly electrospinning approach to honeycomb scaffolds is a technically simple, rapid, and direct way to realize selective deposition of nanofibers. To evaluate cell compatibility, spreading, proliferation and tube formation, human umbilical vein endothelial cells (HUVECs) were cultured on honeycomb scaffolds, as well as on random scaffolds for comparison. The optimized honeycomb nanofibrous scaffolds were observed to better support cell proliferation and network formation, which can facilitate angiogenesis. Moreover, HUVECs cultured on the honeycomb scaffolds were observed to reorganize their cell bodies into tube-like structures containing a central lumen, while this was not observed on random scaffolds. This work has shown that the angiogenic response can be guided by honeycomb scaffolds, allowing improved early HUVECs organization. The guided organization via honeycomb scaffolds can be utilized for tissue engineering applications that require the formation of microvascular networks.

Upgrading prevascularization in tissue engineering: A review of strategies for promoting highly organized microvascular network formation

Functional and perfusable vascular network formation is critical to ensure the long-term survival and functionality of engineered tissues after their transplantation. Although several vascularization strategies have been reviewed in past, the significance of microvessel organization in three-dimensional (3D) scaffolds has been largely ignored. Advances in high-resolution microscopy and image processing have revealed that the majority of tissues including cardiac, skeletal muscle, bone, and skin contain highly organized microvessels that orient themselves to align with tissue architecture for optimum molecular exchange and functional performance. Here, we review strategies to develop highly organized and mature vascular networks in engineered tissues, with a focus on electromechanical stimulation, surface topography, micro scaffolding, surface-patterning, microfluidics and 3D printing. This review will provide researchers with state of the art approaches to engineer vascularized functional tissues for diverse applications. STATEMENT OF SIGNIFICANCE: Vascularization is one of the critical challenges facing tissue engineering. Recent technological advances have enabled researchers to develop microvascular networks in engineered tissues. Although far from translational applications, current vascularization strategies have shown promising outcomes. This review emphasizes the most recent technological advances and future challenges for developing organized microvascular networks in vitro. The next critical step is to achieve highly perfusable, dense, mature and organized microvascular networks representative of native tissues.

Calcium phosphate cement scaffold with stem cell co-culture and prevascularization for dental and craniofacial bone tissue engineering

OBJECTIVE

Calcium phosphate cements (CPCs) mimic nanostructured bone minerals and are promising for dental, craniofacial and orthopedic applications. Vascularization plays a critical role in bone regeneration. This article represents the first review on cutting-edge research on prevascularization of CPC scaffolds to enhance bone regeneration.

METHODS

This article first presented the prevascularization of CPC scaffolds. Then the co-culture of two cell types in CPC scaffolds was discussed. Subsequently, to further enhance the prevascularization efficacy, tri-culture of three different cell types in CPC scaffolds was presented.

RESULTS

(1) Arg-Gly-Asp (RGD) incorporation in CPC bone cement scaffold greatly enhanced cell affinity and bone prevascularization; (2) By introducing endothelial cells into the culture of osteogenic cells (co-culture of two different cell types, or bi-culture) in CPC scaffold, the bone defect area underwent much better angiogenic and osteogenic processes when compared to mono-culture; (3) Tri-culture with an additional cell type of perivascular cells (such as pericytes) resulted in a substantially enhanced prevascularization of CPC scaffolds in vitro and more new bone and blood vessels in vivo, compared to bi-culture. Furthermore, biological cell crosstalk and capillary-like structure formation made critical contributions to the bi-culture system. In addition, the pericytes in the tri-culture system substantially promoted stability and maturation of the primary vascular network.

SIGNIFICANCE

The novel approach of CPC scaffolds with stem cell bi-culture and tri-culture is of great significance in the regeneration of dental, craniofacial and orthopedic defects in clinical practice.

Co-Seeding Human Endothelial Cells with Human-Induced Pluripotent Stem Cell-Derived Mesenchymal Stem Cells on Calcium Phosphate Scaffold Enhances Osteogenesis and Vascularization in Rats

A major challenge in repairing large bone defects with tissue-engineered constructs is the poor vascularization in the defect. The lack of vascular networks leads to insufficient oxygen and nutrients supply, which compromises the survival of seeded cells. To achieve favorable regenerative effects, prevascularization of tissue-engineered constructs by co-culturing of endothelial cells and bone cells is a promising strategy. The aim of this study was to investigate the effects of human-induced pluripotent stem cell-derived mesenchymal stem cells (hiPSC-MSCs) co-cultured with human umbilical vein endothelial cells (HUVECs) for prevascularization of calcium phosphate cement (CPC) scaffold on bone regeneration in vivo for the first time. HUVECs co-cultured with hiPSC-MSCs formed microcapillary-like structures in vitro. HUVECs promoted mineralization of hiPSC-MSCs on CPC scaffolds. Four groups were tested in a cranial bone defect model in nude rats: (1) CPC scaffold alone (CPC control); (2) HUVEC-seeded CPC (CPC-HUVEC); (3) hiPSC-MSC-seeded CPC (CPC-hiPSC-MSC); and (4) HUVECs co-cultured with hiPSC-MSCs on CPC scaffolds (co-culture group). After 12 weeks, the co-culture group achieved the greatest new bone area percentage of 46.38% ± 3.8% among all groups (p < 0.05), which was more than four folds of the 10.61% ± 1.43% of CPC control. In conclusion, HUVECs co-cultured with hiPSC-MSCs substantially promoted bone regeneration. The novel construct of HUVECs co-cultured with hiPSC-MSCs delivered via CPC scaffolds is promising to enhance bone and vascular regeneration in orthopedic applications.

Perivascular cells and tissue engineering: Current applications and untapped potential

The recent development of tissue engineering provides exciting new perspectives for the replacement of failing organs and the repair of damaged tissues. Perivascular cells, including vascular smooth muscle cells, pericytes and other tissue specific populations residing around blood vessels, have been isolated from many organs and are known to participate to the in situ repair process and angiogenesis. Their potential has been harnessed for cell therapy of numerous pathologies; however, in this Review we will discuss the potential of perivascular cells in the development of tissue engineering solutions for healthcare. We will examine their application in the engineering of vascular grafts, cardiac patches and bone substitutes as well as other tissue engineering applications and we will focus on their extensive use in the vascularization of engineered constructs. Additionally, we will discuss the emerging potential of human pericytes for the development of efficient, vascularized and non-immunogenic engineered constructs.

Nano- and microstructured materials for in vitro studies of the physiology of vascular cells

The extracellular environment of vascular cells in vivo is complex in its chemical composition, physical properties, and architecture. Consequently, it has been a great challenge to study vascular cell responses in vitro, either to understand their interaction with their native environment or to investigate their interaction with artificial structures such as implant surfaces. New procedures and techniques from materials science to fabricate bio-scaffolds and surfaces have enabled novel studies of vascular cell responses under well-defined, controllable culture conditions. These advancements are paving the way for a deeper understanding of vascular cell biology and materials-cell interaction. Here, we review previous work focusing on the interaction of vascular smooth muscle cells (SMCs) and endothelial cells (ECs) with materials having micro- and nanostructured surfaces. We summarize fabrication techniques for surface topographies, materials, geometries, biochemical functionalization, and mechanical properties of such materials. Furthermore, various studies on vascular cell behavior and their biological responses to micro- and nanostructured surfaces are reviewed. Emphasis is given to studies of cell morphology and motility, cell proliferation, the cytoskeleton and cell-matrix adhesions, and signal transduction pathways of vascular cells. We finalize with a short outlook on potential interesting future studies.

Bone Regeneration Using Gene-Activated Matrices

Gene delivery to bone is a potential therapeutic strategy for directed, sustained, and regulated protein expression. Tissue engineering strategies for bone regeneration include delivery of proteins, genes (viral and non-viral-mediated delivery), and/or cells to the bone defect site. In addition, biomimetic scaffolds and scaffolds incorporating bone anabolic agents greatly enhance the bone repair process. Regional gene therapy has the potential of enhancing bone defect healing and bone regeneration by delivering osteogenic genes locally to the osseous lesions, thereby reducing systemic toxicity and the need for using supraphysiological dosages of therapeutic proteins. By implanting gene-activated matrices (GAMs), sustained gene expression and continuous osteogenic protein production in situ can be achieved in a way that stimulates osteogenesis and bone repair within osseous defects. Critical parameters substantially affecting the therapeutic efficacy of gene therapy include the choice of osteogenic transgene(s), selection of non-viral or viral vectors, the wound environment, and the selection of ex vivo and in vivo gene delivery strategies, such as GAMs. It is critical for gene therapy applications that clinically beneficial amounts of proteins are synthesized endogenously within and around the lesion in a sustained manner. It is therefore necessary that reliable and reproducible methods of gene delivery be developed and tested for their efficacy and safety before translating into clinical practice. Practical considerations such as the age, gender, and systemic health of patients and the nature of the disease process also need to be taken into account in order to personalize the treatments and progress towards developing a clinically applicable gene therapy for healing bone defects. This review discusses tissue engineering strategies to regenerate bone with specific focus on non-viral gene delivery systems.

Perspectives On: Local and Sustained Delivery of Angiogenic Growth Factors

This review emphasizes the role of angiogenesis in tissue engineering, introduces various angiogenic growth factors, and highlights current status of delivery systems for angiogenic growth factors using natural and synthetic biomaterials. A short overview of angiogenic growth factors is presented, followed by the introduction of emerging strategies for designing smart delivery carriers.

Biomaterial-Stabilized Soft Tissue Healing for Healing of Critical-Sized Bone Defects: the Masquelet Technique

Critical-sized bone defects present a significant burden to the medical community due to their challenging treatment. However, a successful limb-salvaging technique, the Masquelet Technique (MT), has significantly improved the prognosis of many segmental bone defects in helping to restore form and function. Although the Masquelet Technique has proven to be clinically effective, the physiology of the healing it induces is not well understood. Multiple modifiable factors have been implicated by various surgical and research teams, but no single factor has been proven to be critical to the success of the Masquelet Technique. In this review the most recent clinical and experimental evidence that supports and helps to decipher the traditional Masquelet, as well as the modifiable factors and their effect on the success of the technique are discussed. In addition, future developments for the integration of the traditional Masquelet Technique with the use of alternative biomaterials to increase the effectiveness and expand the clinical applicability of the Masquelet Technique are reviewed.

Prolonged Survival of Transplanted Osteoblastic Cells Does Not Directly Accelerate the Healing of Calvarial Bone Defects

Considering the increased interest in cell-based bone regeneration, it is necessary to reveal the fate of transplanted cells and their substantive roles in bone regeneration. The aim of this study was to analyze the fate of transplanted cells and the effect of osteogenic cell transplantation on calvarial bone defect healing. An anti-apoptotic protein, heat shock protein (HSP) 27, was overexpressed in osteoblasts. Then, the treated osteoblasts were transplanted to calvarial bone defect and their fate was analyzed to evaluate the significance of transplanted cell survival. Transient overexpression of Hsp27 rescued MC3T3-E1 osteoblastic cells from H2 O2 -induced apoptosis without affecting osteoblastic differentiation in culture. Transplantation of Hsp27-overexpressing cells, encapsulated in collagen gel, showed higher proliferative activity, and fewer apoptotic cells in comparison with control cells. After 4-week of transplantation, both control cell- and Hsp27 overexpressed cell-transplanted groups showed significantly higher new bone formation in comparison with cell-free gel-transplantation group. Interestingly, the prolonged survival of transplanted osteoblastic cells by Hsp27 did not provide additional effect on bone healing. The transplanted cells in collagen gel survived for up to 4-week but did not differentiate into bone-forming osteoblasts. In conclusion, cell-containing collagen gel accelerated calvarial bone defect healing in comparison with cell-free collagen gel. However, prolonged survival of transplanted cells by Hsp27 overexpression did not provide additional effect. These results strongly indicate that cell transplantation-based bone regeneration cannot be explained only by the increment of osteogenic cells. Further studies are needed to elucidate the practical roles of transplanted cells that will potentiate successful bone regeneration. J. Cell. Physiol. 231: 1974-1982, 2016. © 2016 Wiley Periodicals, Inc.

Effect of exogenous adipose-derived stem cells in the early stages following free fat transplantation

Cotransplantation of adipose-derived stem cells (ASCs) is an effective therapeutic approach for enhancing the survival of transplanted fat tissue; however, the role of ASCs in free fat transplantation remains unclear. In the present study, fat harvested from C57BL/6 mice expressing green fluorescent protein was injected subcutaneously into the back of C57BL/6 mice, who also received ASCs (group A) or received the fat tissue only (group B). The grafts were harvested at days 1, 4, 7, 14, 30 and 90 following the transplantation. Graft volume and histology were evaluated, and the secretion levels of vascular endothelial growth factor (VEGF) and hepatocyte growth factor (HGF) were quantified using enzyme-linked immunosorbent assays. No statistically significant difference was identified between groups A and B in the graft survival rate up to day 14 following the aspirated fat transplantation; however, the graft survival rate decreased during the following 14-90 days. Initially, group =A exhibited a higher graft survival rate and a greater degree of angiogenesis compared with group B. The ratio of dead cells was not significantly different between the two groups on day 1; however, group A had a greater number of living interstitial cells compared with group B at the later time points. The secretion of VEGF by the ASCs had an earlier peak time in group A (day 4) compared with group B (day 7). In addition, the secretion of HGF in group A was greater compared with group B. Therefore, the role of exogenous ASCs in free fat transplantation may not directly participate in angiogenesis and adipogenesis, but may promote the survival ratio of the graft-resident interstitial cells, which are involved in angiogenesis and adipogenesis, via a paracrine effect.

Cell-based bone regeneration for alveolar ridge augmentation--cell source, endogenous cell recruitment and immunomodulatory function

Alveolar ridge plays a pivotal role in supporting dental prosthesis particularly in edentulous and semi-dentulous patients. However the alveolar ridge undergoes atrophic change after tooth loss. The vertical and horizontal volume of the alveolar ridge restricts the design of dental prosthesis; thus, maintaining sufficient alveolar ridge volume is vital for successful oral rehabilitation. Recent progress in regenerative approaches has conferred marked benefits in prosthetic dentistry, enabling regeneration of the atrophic alveolar ridge. In order to achieve successful alveolar ridge augmentation, sufficient numbers of osteogenic cells are necessary; therefore, autologous osteoprogenitor cells are isolated, expanded in vitro, and transplanted to the specific anatomical site where the bone is required. Recent studies have gradually elucidated that transplanted osteoprogenitor cells are not only a source of bone forming osteoblasts, they appear to play multiple roles, such as recruitment of endogenous osteoprogenitor cells and immunomodulatory function, at the forefront of bone regeneration. This review focuses on the current consensus of cell-based bone augmentation therapies with emphasis on cell sources, transplanted cell survival, endogenous stem cell recruitment and immunomodulatory function of transplanted osteoprogenitor cells. Furthermore, if we were able to control the mobilization of endogenous osteoprogenitor cells, large-scale surgery may no longer be necessary. Such treatment strategy may open a new era of safer and more effective alveolar ridge augmentation treatment options.

Phase II angiogenesis stimulators

INTRODUCTION

Therapeutic angiogenesis is a strategy of inducing new collateral vessels and stimulating new capillaries that enhance tissue oxygen exchange in ischemic cardiovascular disorders, including acute myocardial infarction, chronic cardiac ischemia, peripheral artery disease and stroke.

AREAS COVERED

Over the last 10 years, promising results of early clinical trials have generated great expectation on the potential of therapeutic angiogenesis. However, even if large randomized placebo-controlled and double-blinded Phase II clinical trials have confirmed the feasibility, safety and potential effectiveness of therapeutic angiogenesis, they provided very limited evidence of its efficacy in terms of clinical benefit.

EXPERT OPINION

Results of the latest trials on therapeutic angiogenesis have not provided satisfactory results. Much is still unknown about the optimal delivery of angiogenic factors. Trials using alternative growth factors, dose regimens and methods of delivery are needed to enhance the treatment benefit of therapeutic angiogenesis.

Human endothelial colony-forming cells expanded with an improved protocol are a useful endothelial cell source for scaffold-based tissue engineering

One of the major challenges in tissue engineering is to supply larger three-dimensional (3D) bioengineered tissue transplants with sufficient amounts of nutrients and oxygen and to allow metabolite removal. Consequently, artificial vascularization strategies of such transplants are desired. One strategy focuses on endothelial cells capable of initiating new vessel formation, which are settled on scaffolds commonly used in tissue engineering. A bottleneck in this strategy is to obtain sufficient amounts of endothelial cells, as they can be harvested only in small quantities directly from human tissues. Thus, protocols are required to expand appropriate cells in sufficient amounts without interfering with their capability to settle on scaffold materials and to initiate vessel formation. Here, we analysed whether umbilical cord blood (CB)-derived endothelial colony-forming cells (ECFCs) fulfil these requirements. In a first set of experiments, we showed that marginally expanded ECFCs settle and survive on different scaffold biomaterials. Next, we improved ECFC culture conditions and developed a protocol for ECFC expansion compatible with 'Good Manufacturing Practice' (GMP) standards. We replaced animal sera with human platelet lysates and used a novel type of tissue-culture ware. ECFCs cultured under the new conditions revealed significantly lower apoptosis and increased proliferation rates. Simultaneously, their viability was increased. Since extensively expanded ECFCs could still settle on scaffold biomaterials and were able to form tubular structures in Matrigel assays, we conclude that these ex vivo-expanded ECFCs are a novel, very potent cell source for scaffold-based tissue engineering.

Endothelialization approaches for viable engineered tissues

One of the main limitation in obtaining thick, 3-dimensional viable engineered constructs is the inability to provide a sufficient and functional blood vessel system essential for the in vitro survival and the in vivo integration of the construct. Different strategies have been proposed to simulate the ingrowth of new blood vessels into engineered tissue, such as the use of growth factors, fabrication scaffold technologies, in vivo prevascularization and cell-based strategies, and it has been demonstrated that endothelial cells play a central role in the neovascularization process and in the control of blood vessel function. In particular, different "environmental" settings (origin, presence of supporting cells, biomaterial surface, presence of hemodynamic forces) strongly influence endothelial cell function, angiogenic potential and the in vivo formation of durable vessels. This review provides an overview of the different techniques developed so far for the vascularization of tissue-engineered constructs (with their advantages and pitfalls), focusing the attention on the recent development in the cell-based vascularization strategy and the in vivo applications.

Effects on proliferation and differentiation of multipotent bone marrow stromal cells engineered to express growth factors for combined cell and gene therapy

A key mechanism for mesenchymal stem cells/bone marrow stromal cells (MSCs) to promote tissue repair is by secretion of soluble growth factors (GFs). Therefore, clinical application could be optimized by a combination of cell and gene therapies, where MSCs are genetically modified to express higher levels of a specific factor. However, it remains unknown how this overexpression may alter the fate of the MSCs. Here, we show effects of overexpressing the growth factors, such as basic fibroblast growth factor (bFGF), platelet derived growth factor B (PDGF-BB), transforming growth factor β(1) (TGF-β(1) ), and vascular endothelial growth factor (VEGF), in human bone marrow-derived MSCs. Ectopic expression of bFGF or PDGF-B lead to highly proliferating MSCs and lead to a robust increase in osteogenesis. In contrast, adipogenesis was strongly inhibited in MSCs overexpressing PDGF-B and only mildly affected in MSCs overexpressing bFGF. Overexpression of TGF-β(1) blocked both osteogenic and adipogenic differentiation while inducing the formation of stress fibers and increasing the expression of the smooth muscle marker calponin-1 and the chondrogenic marker collagen type II. In contrast, MSCs overexpressing VEGF did not vary from control MSCs in any parameters, likely due to the lack of VEGF receptor expression on MSCs. MSCs engineered to overexpress VEGF strongly induced the migration of endothelial cells and enhanced blood flow restoration in a xenograft model of hind limb ischemia. These data support the rationale for genetically modifying MSCs to enhance their therapeutically relevant trophic signals, when safety and efficacy can be demonstrated, and when it can be shown that there are no unwanted effects on their proliferation and differentiation.

Vascular morphogenesis of adipose-derived stem cells is mediated by heterotypic cell-cell interactions

Adipose-derived stromal/stem cells (ASCs) are a promising cell source for vascular-based approaches to clinical therapeutics, as they have been shown to give rise to both endothelial and perivascular cells. While it is well known that ASCs can present a heterogeneous phenotypic profile, spontaneous interactions among these subpopulations that result in the formation of complex tissue structures have not been rigorously demonstrated. Our study reports the novel finding that ASCs grown in monolayers in the presence of angiogenic cues are capable of self-assembling into complex, three-dimensional vascular structures. This phenomenon is only apparent when the ASCs are seeded at a high density (20,000 cells/cm(2)) and occur through orchestrated interactions among three distinct subpopulations: CD31-positive cells (CD31+), α-smooth muscle actin-positive cells (αSMA+), and cells that are unstained for both these markers (CD31-/αSMA-). Investigations into the kinetics of the process revealed that endothelial vessel-like structures initially arose from individual CD31+ cells through proliferation and their interactions with CD31-/αSMA- cells. During this period, αSMA+ cells proliferated and appeared to migrate toward the vessel structures, eventually engaging in cell-cell contact with them after 1 week. By 2 weeks, the lumen-containing CD31+ vessels grew greater than a millimeter in length, were lined with vascular basement membrane proteins, and were encased within a dense, three-dimensional cluster of αSMA+ and CD31-/αSMA- cells. The recruitment of αSMA+ cells was largely due to platelet-derived growth factor (PDGF) signaling, as the inhibition of PDGF receptors substantially reduced αSMA+ cell growth and vessel coverage. Additionally, we found that while hypoxia increased endothelial gene expression and vessel width, it also inhibited the growth of the αSMA+ population. Together, these findings underscore the potential use of ASCs in forming mature vessels in vitro as well as the need for a further understanding of the heterotypic interactions among ASC subpopulations.

The in vitro preconditioning of myoblasts to enhance subsequent survival in an in vivo tissue engineering chamber model

The effects of in vitro preconditioning protocols on the ultimate survival of myoblasts implanted in an in vivo tissue engineering chamber were examined. In vitro testing: L6 myoblasts were preconditioned by heat (42 °C; 1.5 h); hypoxia (<8% O(2); 1.5 h); or nitric oxide donors: S-nitroso-N-acetylpenicillamine (SNAP, 200 μM, 1.5 h) or 1-[N-(2-aminoethyl)-N-(2-aminoethyl)amino]-diazen-1-ium-1,2-diolate (DETA-NONOate, 500 μM, 7 h). Following a rest phase preconditioned cells were exposed to 24 h hypoxia, and demonstrated minimal overall cell loss, whilst controls (not preconditioned, but exposed to 24 h hypoxia) demonstrated a 44% cell loss. Phosphoimmunoblot analysis of pro-survival signaling pathways revealed significant activation of serine threonine kinase Akt with DETA-NONOate (p < 0.01) and heat preconditioning (p < 0.05). DETA-NONOate also activated ERK 1/2 signaling (p < 0.05). In vivo implantation: 100,000 preconditioned (heat, hypoxia, or DETA-NONOate) myoblasts were implanted in SCID mouse tissue engineering chambers. 100,000 (not preconditioned) myoblasts were implanted in control chambers. At 3 weeks, morphometric assessment of surviving myoblasts indicated myoblast percent volume (p = 0.012) and myoblasts/mm(2) (p = 0.0005) overall significantly increased in preconditioned myoblast chambers compared to control, with DETA-NONOate-preconditioned myoblasts demonstrating the greatest increase in survival (p = 0.007 and p = 0.001 respectively). DETA-NONOate therefore has potential therapeutic benefits to significantly improve survival of transplanted cells.

Paracrine interactions between mesenchymal stem cells affect substrate driven differentiation toward tendon and bone phenotypes

We investigated substrate dependent paracrine signaling between subpopulations of bone marrow stromal cells (BMSCs) that may affect the formation, or perhaps malformation, of the regenerating tendon to bone enthesis. Polyacrylamide substrates approximating the elastic modulus of tendon granulation tissue and the osteoid of healing bone (10–90 kPa) were functionalized with whole length fibronectin (Fn), type-I collagen (Col), or a mixed ligand solution (Fn/Col), and BMSCs were cultured in growth media alone or media supplemented with soluble Col or Fn. More rigid substrates with a narrow mechanical gradient (70–90 kPa) robustly induced osteogenic cell differentiation when functionalized with either Col or Fn. On broader mechanical gradient substrates (with a linear elastic modulus gradient from 10–90 kPa), cell differentiation was markedly osteogenic on subregions of Fn functionalized substrates above 20 kPa, but osteogenic activity was inhibited on all subregions of Col substrates. Osteogenic behavior was not observed when cells were cultured on Fn substrates if Col was present either in the media or on the substrate (Fn/Col). Tenogenic differentiation markers were observed only on Col substrates with moderate rigidity (∼30–50 kPa). Tenogenic differentiation was unaltered by soluble or substrate bound Fn. Co-culture of narrow gradient subsections revealed that any inclusion of tenogenic substrates (30–50 kPa, Col), caused otherwise osteogenic substrates to not develop markers of osteogenic differentiation, while increasing cell proliferation. These apparently paracrine effects could be mediated by bone morphogenetic protein-2 (BMP-2), as first confirmed by gene-level expression of BMP-2 and the transcription factor Smad8, and verified by BMP-2 media supplementation at levels similar to observed cell-secreted concentrations, which arrested osteogenic differentiation in 14 day cultures. Thus, cell instructive biomaterials with engineered mechanical and biochemical properties represent potentially powerful tools for directing BMSC differentiation to tendon and bone, however paracrine signals from tenogenic cells may delay osteogenesis at the healing enthesis.

Mechanisms of vascular endothelial growth factor-induced pathfinding by endothelial sprouts in biomaterials

A critical property of biomaterials for use in regenerative medicine applications is the ability to promote angiogenesis, the formation of new vascular networks, to support regenerating tissues. Recent studies have demonstrated that a complex interplay exists between biomechanical and biochemical regulators of endothelial cell sprouting, an early step in angiogenesis. Here, we use a microfluidic platform to study the pathfinding behaviors induced by various stable vascular endothelial growth factor (VEGF) gradients during sprouting morphogenesis within biomaterials. Quantitative, time-lapse analysis of endothelial sprouting demonstrated that the ability of VEGF to regulate sprout orientation during several stages of sprouting morphogenesis (initiation, elongation, and turning navigation) was biomaterial dependent. Identical VEGF gradients induced different types of coordinated cell movements depending on the density of the surrounding collagen/fibronectin matrix. In denser matrices, sprouts were more likely to have an initial orientation aligned parallel to the VEGF gradient. In contrast, in less dense matrices, sprouts were more likely to initially misalign with the VEGF gradient; however, these sprouts underwent significant turning and navigation to eventually reorient to be parallel to the VEGF gradient. These less dense matrices required shallower VEGF gradients and demonstrated lower activating VEGF thresholds to induce proper sprout alignment and pathfinding. These results encourage the future use of microfluidic platforms to probe fundamental aspects of matrix effects on angiogenesis, to screen biomaterials for angiogenic potential, and to design ex vivo tissues with aligned vascular networks.

Evolution of oxygen utilization in multicellular organisms and implications for cell signalling in tissue engineering

Oxygen is one of the critically defining elements resulting in the existence of eukaryotic life on this planet. The rise and fall of this element can be tracked through time and corresponds with the evolution of diverse life forms, development of efficient energy production (oxidative phosphorylation) in single cell organisms, the evolution of multicellular organisms and the regulation of complex cell phenotypes. By understanding these events, we can plot the effect of oxygen on evolution and its direct influence on different forms of life today, from the whole organism to specific cells within multicellular organisms. In the emerging field of tissue engineering, understanding the role of different levels of oxygen for normal cell function as well as control of complex signalling cascades is paramount to effectively build 3D tissues in vitro and their subsequent survival when implanted.

Scaffold vascularization in vivo driven by primary human osteoblasts in concert with host inflammatory cells

Successful cell-based tissue engineering requires a rapid and thorough vascularization in order to ensure long-term implant survival and tissue integration. The vascularization of a scaffold is a complex process, and is modulated by the presence of transplanted cells, exogenous and endogenous signaling proteins, and the host tissue reaction, among other influencing factors. This paper presents evidence for the significance of pre-seeded osteoblasts for the in vivo vascularization of a biodegradable scaffold. Human osteoblasts, cultured on silk fibroin micronets in vitro, migrated throughout the interconnected pores of the scaffold and produced extensive bone matrix. When these constructs were implanted in SCID mice, a rapid and thorough vascularization of the scaffold by the host blood capillaries occurred. This profound response was not seen for the silk fibroin scaffold alone. Moreover, when the pre-cultivation time of human osteoblasts was reduced from 14 days to only 24 h, the significant effect these cells exerted on vascularization rate in vivo was still detectable. From these studies, we conclude that matrix and soluble factors produced by osteoblasts can serve to instruct host endothelial cells to migrate, proliferate, and initiate the process of scaffold vascularization. This finding represents a potential paradigm shift for the field of tissue engineering, especially in bone, as traditional strategies to enhance scaffold vascularization have focused on endovascular cells and regarded osteoblasts primarily as cell targets for mineralization. In addition, the migration of host macrophages and multinucleated giant cells into the scaffold was also found to influence the vascularization of the biomaterial. Therefore, the robust effect on scaffold vascularization seen by pre-culturing with osteoblasts appears to occur in concert with the pro-angiogenic stimuli arising from host immune cells.

Migration of co-cultured endothelial cells and osteoblasts in composite hydroxyapatite/polylactic acid scaffolds

Regeneration of bone in large segmental bone defects requires regeneration of both cortical bone and trabecular bone. A scaffold design consisting of a hydroxyapatite (HA) ring surrounding a polylactic acid (PLA) core simulates the structure of bone and provides an environment for indirect and direct co-culture conditions. In this experiment, human umbilical vein endothelial cells (EC) and normal human primary osteoblasts (OB) were co-cultured to evaluate cell migration and interactions within this biphasic composite scaffold. Both cell types were able to migrate between the different material phases of the scaffold. It was also observed that OB migration increased when they were co-cultured with ECs, whereas EC migration decreased in co-culture. The results show that co-culture of ECs and OBs in this composite biphasic scaffold allows for migration of cells throughout the scaffold and that pre-seeding a scaffold with ECs can increase OB infiltration into desired areas of the scaffold.

The rapid anastomosis between prevascularized networks on silk fibroin scaffolds generated in vitro with cocultures of human microvascular endothelial and osteoblast cells and the host vasculature

The survival and functioning of a bone biomaterial upon implantation requires a rapidly forming and stably functioning vascularization that connects the implant to the recipient. We have previously shown that human microcapillary endothelial cells (HDMEC) and primary human osteoblast cells (HOS) in coculture on various 3-D bone biomaterial scaffolds rapidly distribute and self-assemble into a morphological structure resembling bone tissue. Endothelial cells form microcapillary-like structures containing a lumen and these were intertwined between the osteoblast cells and the biomaterial. This tissue-like self-assembly occurred in the absence of exogenously added angiogenic stimuli or artificial matrices. The purpose of this study was to determine whether this in vitro pre-formed microvasculature persists and functions in vivo and to determine how the host responds to the cell-containing scaffolds. The scaffolds with cocultures were implanted into immune-deficient mice and compared to scaffolds without cells or with HDMEC alone. Histological evaluation and immunohistochemical staining with human-specific antibodies of materials removed 14 days after implantation demonstrated that the in vitro pre-formed microcapillary structures were present on the silk fibroin scaffolds and showed a perfused lumen that contained red blood cells. This proved anastomosis with the host vasculature. Chimeric vessels in which HDMEC were integrated with the host's ingrowing (murine) capillaries were also observed. No HDMEC-derived microvessel structures or chimeric vessels were observed on implanted silk fibroin when precultured with HDMEC alone. In addition, there was migration of the host (murine) vasculature into the silk fibroin scaffolds implanted with cocultures, whereas silk fibroin alone or silk fibroin precultured only with HDMEC were nearly devoid of ingrowing host microcapillaries. Therefore, not only do the in vitro pre-formed microcapillaries in a coculture survive and anastomose with the host vasculature to become functioning microcapillaries after implantation, the coculture also stimulates the host capillaries to rapidly grow into the scaffold to vascularize the implanted material. Thus, this coculture-based pre-vascularization of a biomaterial implant may have great potential in the clinical setting to treat large bone defects.

Recent trends and challenges in complex organ manufacturing

Presently, there is a recognized and imperative need for bioartificial organs. The technological advances in transgenosis, tissue engineering, and rapid prototyping have led to the development of spatially complex tissues. An ideal artificial organ should provide nutrient transport system, mechanical stable architecture, and synergetic multicellular organization in one construct. The multinozzle rapid prototyping technique simultaneously assembles vascular systems including hierarchical multicellular structures in an automated and reproducible manner and offers an effective way for treating organ failures. In this article, a brief overview of the recent trends and outstanding challenges in organ manufacturing is provided. From the viewpoint of disciplinary crossing, integration, and development, future directions in the coming years were pointed out.

Molecular mediators of angiogenesis

Angiogenesis, or the formation of new blood vessels from the preexisting vasculature, is a key component in numerous physiologic and pathologic responses and has broad impact in many medical and surgical specialties. In this review, we discuss the key cellular steps that lead to the neovascularization of tissues and highlight the main molecular mechanisms and mediators in this process. We include discussions on proteolytic enzymes, cell-matrix interactions, and pertinent cell signaling pathways and end with a survey of the mechanisms that lead to the stabilization and maturation of neovasculatures.

Angiogenesis and Microvascular Remodeling: A Brief History and Future Roadmap

Angiogenesis and vessel remodeling determine the integrative control of the architectural structure and functional behaviors of the microcirculation over the lifetime of an organism. Vascular remodeling is the basis of promising therapeutic strategies, including vascularization of ischemic organs. The history of angiogenesis research is long-more than 250 years-and the Microcirculatory Society has been the birthplace of numerous techniques, assays, and scientific concepts that have stimulated massive research endeavors in the pharmaceutical and medical arena. At present, angiogenesis isa dynamic field in which the molecular genetic and proteomic components of the process are still being identified, while integrative systems approaches are once again being recognized as essential to understand microvascular assembly in vivo across multiple scales from cells to whole vessel networks. A short history of people and ideas in this field is presented, followed by discussion of emerging directions receiving intense attention today and major questions that remain unanswered. The primary conclusion is that the need for scientists trained in the integrative approaches nurtured by the Microcirculatory Society over the past 50 years has never been greater, as it is clear that a complete mechanistic understanding of vessel adaptation (based on genomic and proteomic supporting casts) will now require deeper studies of angiogenesis and microvascular remodeling in the exquisite complexity of the native microenvironment-the microcirculation.

Dose effect of dual delivery of vascular endothelial growth factor and bone morphogenetic protein-2 on bone regeneration in a rat critical-size defect model

The dose effect of dual delivery of vascular endothelial growth factor (VEGF) and bone morphogenetic protein-2 (BMP-2) on bone regeneration was investigated in a rat cranial critical-size defect (CSD). It was hypothesized that decreasing amounts of BMP-2 would result in a dose-dependent decrease in bone formation, and that this reduction in bone formation could be reversed by adding increasing amounts of VEGF. In vitro release kinetics of VEGF or BMP-2 were examined over 28 days. Next, scaffolds were implanted within a rat cranial CSD containing different combinations of both BMP-2 and VEGF. At 12 weeks, samples were analyzed using microcomputed tomography and histology. In vitro, VEGF and BMP-2 exhibited burst release in the first 24 h followed by a significant decrease in release rate over 27 days. Overall, BMP-2 had a more sustained release versus VEGF. An in vivo dose-dependent decrease in percentage of bone fill (PBF) was observed for BMP-2. The addition of VEGF was unable to reverse this decrease in PBF, although improvements in the number of bridged defects did occur in some groups. This suggests that for this particular model simultaneous release of BMP-2 and VEGF does not increase bone formation over BMP-2 alone at 12 weeks.

Dose effect of dual delivery of vascular endothelial growth factor and bone morphogenetic protein-2 on bone regeneration in a rat critical-size defect model

The dose effect of dual delivery of vascular endothelial growth factor (VEGF) and bone morphogenetic protein-2 (BMP-2) on bone regeneration was investigated in a rat cranial critical-size defect (CSD). It was hypothesized that decreasing amounts of BMP-2 would result in a dose-dependent decrease in bone formation, and that this reduction in bone formation could be reversed by adding increasing amounts of VEGF. In vitro release kinetics of VEGF or BMP-2 were examined over 28 days. Next, scaffolds were implanted within a rat cranial CSD containing different combinations of both BMP-2 and VEGF. At 12 weeks, samples were analyzed using microcomputed tomography and histology. In vitro, VEGF and BMP-2 exhibited burst release in the first 24 h followed by a significant decrease in release rate over 27 days. Overall, BMP-2 had a more sustained release versus VEGF. An in vivo dose-dependent decrease in percentage of bone fill (PBF) was observed for BMP-2. The addition of VEGF was unable to reverse this decrease in PBF, although improvements in the number of bridged defects did occur in some groups. This suggests that for this particular model simultaneous release of BMP-2 and VEGF does not increase bone formation over BMP-2 alone at 12 weeks.

Effect of endothelium mimicking self-assembled nanomatrices on cell adhesion and spreading of human endothelial cells and smooth muscle cells

The goal of this study is to develop unique native endothelium mimicking nanomatrices and evaluate their effects on adhesion and spreading of human umbilical vein endothelial cells (HUVECs) and aortic smooth muscle cells (AoSMCs). These nanomatrices were developed by self-assembly of peptide amphiphiles (PAs) through a solvent evaporation technique. Three PAs, one containing the Tyr-Ile-Gly-Ser-Arg (YIGSR) ligand, the second containing the Val-Ala-Pro-Gly (VAPG) ligand, and a third without cell adhesive ligands, were developed. Cell adhesion and spreading were evaluated by a PicoGreen-DNA assay and live/dead assay, respectively. Our results show that PA-YIGSR significantly enhances HUVEC adhesion (26,704 +/- 2708), spreading (84 +/- 8%), and proliferation (50 +/- 2%) compared with that of other PAs. PA-VAPG and PA-YIGSR showed significantly greater AoSMC adhesion compared with that of PA-S. PA-VAPG also showed significantly greater spreading of AoSMCs (63 +/- 11%) compared with that of other PAs. Also, all the PAs showed significantly reduced platelet adhesion compared with that of collagen I (control). These findings would facilitate the development of novel vascular grafts, heart valves, and cell-based therapies for cardiovascular diseases.

FROM THE CLINICAL EDITOR

The goal of this study was to develop unique native endothelium mimicking nanomatrices and evaluate their effects on adhesion and spreading of human umbilical vein endothelial cells (HUVECs) and aortic smooth muscle cells (AoSMCs). These nanomatrices were developed by self-assembly of peptide amphiphiles through a solvent evaporation technique. The findings are expected to facilitate the development of novel vascular grafts, heart valves, and cell based therapies for cardiovascular diseases.

Nanoparticulate systems for growth factor delivery

The field of nanotechnology, which aims to control and utilize matter generally in 1-100 nm range, has been at the forefront of pharmaceutical development. Nanoparticulate delivery systems, with their potential to control drug release profiles, prolonging the presence of drugs in circulation, and to target drugs to a specific site, hold tremendous promise as delivery strategies for therapeutics. Growth factors are endogenous polypeptides that initiate intracellular signals to regulate cellular activities, such as proliferation, migration and differentiation. With improved understanding of their roles in physiopathology and expansion of their availability through recombinant technologies, growth factors are becoming leading therapeutic candidates for tissue engineering approaches. However, the outcome of growth factor therapeutics largely depends on the mode of their delivery due to their rapid degradation in vivo, and non-specific distribution after systemic administration. In order to overcome these impediments, nanoparticulate delivery systems are being harnessed for spatiotemporal controlled delivery of growth factors. This review presents recent advances and some disadvantages of various nanoparticulate systems designed for effective intact growth factor delivery. The therapeutic applications of growth factors delivered by such systems are reviewed, especially for bone, skin and nerve regeneration as well as angiogenesis. Finally, future challenges and directions in the field are presented in addition to the current limitations.

Biomimetic control of vascular smooth muscle cell morphology and phenotype for functional tissue-engineered small-diameter blood vessels

Small-diameter blood vessel substitutes are urgently needed for patients requiring replacements of their coronary and below-the-knee vessels and for better arteriovenous dialysis shunts. Circulatory diseases, especially those arising from atherosclerosis, are the predominant cause of mortality and morbidity in the developed world. Current therapies include the use of autologous vessels or synthetic materials as vessel replacements. The limited availability of healthy vessels for use as bypass grafts and the failure of purely synthetic materials in small-diameter sites necessitate the development of a biological substitute. Tissue engineering is such an approach and has achieved promising results, but reconstruction of a functional vascular tunica media, with circumferentially oriented contractile smooth muscle cells (SMCs) and extracellular matrix, appropriate mechanical properties, and vasoactivity has yet to be demonstrated. This review focuses on strategies to effect the switch of SMC phenotype from synthetic to contractile, which is regarded as crucial for the engineering of a functional vascular media. The synthetic SMC phenotype is desired initially for cell proliferation and tissue remodeling, but the contractile phenotype is then necessary for sufficient vasoactivity and inhibition of neointima formation. The factors governing the switch to a more contractile phenotype with in vitro culture are reviewed.

Growth and phenotypic expression of human endothelial cells cultured on a glass-reinforced hydroxyapatite

Glass-reinforced hydroxyapatite composites (GR-HA) are bone regenerative materials that are characterized by their increased mechanical properties, when compared to synthetic hydroxyapatite. Bonelike is a GR-HA that is a result of the addition of a CaO-P(2)O(5) based glass to a HA matrix. This biomaterial has been successfully applied in clinical bone regenerative applications. This work aims to evaluate the ability of Bonelike to support the adhesion, proliferation and phenotypic expression of human endothelial cells, aiming to establish new bone tissue engineering pre-endothelialization strategies. Bonelike discs, regardless of being submitted to a pre-immersion treatment with culture medium, were seeded with first passage human umbilical vein endothelial cells, and characterized regarding proliferation and differentiation events. Pre-immersed Bonelike allowed the adhesion, proliferation and phenotype expression of endothelial cells. Seeded materials presented positive immunofluorescent staining for PECAM-1 and a tendency for the formation of cord-like arrangements under angiogenesis-stimulating conditions, although, compared to standard culture plates, a slight decreased cell growth was observed. In this way, Bonelike may be a suitable candidate for pre-endothelialization approaches in bone tissue engineering applications.

Imaging angiogenesis and the microenvironment

Intravital microscopy has provided unprecedented insights into tumor pathophysiology, including angiogenesis and the microenvironment. Tumor vasculature shows an abnormal organization, structure, and function. Tumor vessels are leaky, blood flow is heterogeneous and often compromised. Vascular hyperpermeability and the lack of functional lymphatic vessels inside tumors causes elevation of interstitial fluid pressure in solid tumors. These abnormalities form physiological barriers to the delivery of therapeutic agents to tumors and also lead to a hostile microenvironment characterized by hypoxia and acidosis, which hinders the effectiveness of anti-tumor treatments such as radiation therapy and chemotherapy. In addition, host-tumor interactions regulate expression of pro- and anti-angiogenic factors, resulting in pathophysiological characteristics of the tumor. On the other hand, in a physiological setting, angiogenic vessels become mature and form long-lasting functional units. Restoring the balance of pro- and anti-angiogenic factors in tumors may "normalize" tumor vasculature and thus improve its function. Administration of cytotoxic therapy during the vascular normalization would enhance its efficacy.

Vascularization in tissue engineering

Tissue engineering has been an active field of research for several decades now. However, the amount of clinical applications in the field of tissue engineering is still limited. One of the current limitations of tissue engineering is its inability to provide sufficient blood supply in the initial phase after implantation. Insufficient vascularization can lead to improper cell integration or cell death in tissue-engineered constructs. This review will discuss the advantages and limitations of recent strategies aimed at enhancing the vascularization of tissue-engineered constructs. We will illustrate that combining the efforts of different research lines might be necessary to obtain optimal results in the field.

Vascular adaptation and mechanical homeostasis at tissue, cellular, and sub-cellular levels

Blood vessels exhibit a remarkable ability to adapt throughout life that depends upon genetic programming and well-orchestrated biochemical processes. Findings over the past four decades demonstrate, however, that the mechanical environment experienced by these vessels similarly plays a critical role in governing their adaptive responses. This article briefly reviews, as illustrative examples, six cases of tissue level growth and remodeling, and then reviews general observations at cell-matrix, cellular, and sub-cellular levels, which collectively point to the existence of a "mechanical homeostasis" across multiple length and time scales that is mediated primarily by endothelial cells, vascular smooth muscle cells, and fibroblasts. In particular, responses to altered blood flow, blood pressure, and axial extension, disease processes such as cerebral aneurysms and vasospasm, and diverse experimental manipulations and clinical treatments suggest that arteries seek to maintain constant a preferred (homeostatic) mechanical state. Experiments on isolated microvessels, cell-seeded collagen gels, and adherent cells isolated in culture suggest that vascular cells and sub-cellular structures such as stress fibers and focal adhesions likewise seek to maintain constant a preferred mechanical state. Although much is known about mechanical homeostasis in the vasculature, there remains a pressing need for more quantitative data that will enable the formulation of an integrative mathematical theory that describes and eventually predicts vascular adaptations in response to diverse stimuli. Such a theory promises to deepen our understanding of vascular biology as well as to enable the design of improved clinical interventions and implantable medical devices.

Tissue-like self-assembly in cocultures of endothelial cells and osteoblasts and the formation of microcapillary-like structures on three-dimensional porous biomaterials

The survival and functioning of a bone biomaterial requires a rapid and stable vascularization after implantation. However, the mechanisms involved in the context of the complex healing microenvironment are poorly understood. To evaluate the vascularization potential of bone biomaterials, angiogenic stimuli were added to human dermal microvascular endothelial cells (HDMEC) growing on three-dimensional (3-D) bone biomaterials consisting of porous hydroxyapatite, porous calcium phosphate, porous nickel-titanium, successfully being used in humans, and also silk fibroin nets. HDMEC did not migrate to form microcapillary-like structures as they did on cell culture plastic. In cocultures of HDMEC and primary human osteoblast cells (HOS) or the human osteoblast-like cell line MG-63 on these biomaterials, a tissue-like self-assembly of cells occurred with time, with endothelial cells forming microcapillary-like structures containing a lumen and giving a strong PECAM-1 expression at cell interfaces. These microcapillary-like structures were intertwined between cell layers of osteoblasts and did not form when exogenous angiogenic stimuli were added to these cocultures. The life span of HDMEC was also significantly enhanced by coculture; with HDMEC being present for up to at least 42 days, compared to the monoculture where cells began to die rapidly after 1 week without passage. This coculture system may be applicable to a prevascularization strategy for biomaterials prior to implantation. Irrespective of this, the coculture model holds promise for studies to deepen our understanding of bone regeneration on 3-D substrates. Most importantly, these data raise important questions concerning the exact nature of pro-angiogenic drug- or gene-delivery systems to be incorporated into scaffolds. Our results underline the necessity to take into account the in situ production of growth factors by invading mesenchymal cells in the regenerative niche.

Polymers for pro- and anti-angiogenic therapy

Dysregulated growth factor signaling is traditionally targeted via bolus injections of therapeutic molecules, but this approach may not recreate necessary qualitative and quantitative aspects of biologic growth factor delivery systems. Polymeric delivery systems may, instead, mimic certain sequestration and binding characteristics of the extracellular matrix and lead to the provision of therapeutic molecules at therapeutically efficient local concentrations [V], in the form of spatial gradients (d[V]/dx) and temporal gradients (d[V]/dt), and in combination with other morphogenetic cues. Both physicochemical and biological attributes dictate their design, and they may be fabricated from synthetic and natural polymers. General concepts for manipulating growth factor signaling with these systems are discussed in the context of angiogenesis with vascular endothelial growth factor (VEGF), and these strategies may be broadly adapted to a multitude of other morphogens and growth factors.

Using a histone yellow fluorescent protein fusion for tagging and tracking endothelial cells in ES cells and mice

We report the first endothelial lineage-specific transgenic mouse allowing live imaging at subcellular resolution. We generated an H2B-EYFP fusion protein which can be used for fluorescent labeling of nucleosomes and used it to specifically label endothelial cells in mice and in differentiating embryonic stem (ES) cells. A fusion cDNA encoding a human histone H2B tagged at its C-terminus with enhanced yellow fluorescent protein (EYFP) was expressed under the control of an Flk1 promoter and intronic enhancer. The Flk1::H2B-EYFP transgenic mice are viable and high levels of chromatin-localized reporter expression are maintained in endothelial cells of developing embryos and in adult animals upon breeding. The onset of fluorescence in differentiating ES cells and in embryos corresponds with the beginning of endothelial cell specification. These transgenic lines permit real-time imaging in normal and pathological vasculogenesis and angiogenesis to track individual cells and mitotic events at a level of detail that is unprecedented in the mouse.