Strategies to potentiate antimicrobial photoinactivation by overcoming resistant phenotypes

Experimental study on the effect of light source arrangements on the disinfection performance of upper-room 222 nm Far-UVC

The air disinfection efficacy of upper-room 222 nm Far-UVC was experimentally investigated in a real-size chamber under well-mixed air conditions. Two bacteria (Escherichia coli, Staphylococcus epidermidis) and two bacteriophages (MS2, and P22) were selected for the test. The study considered different lamp source arrangements, including single and double sources, stationary and rotating operating modes, and an overlapping mode with a 45° irradiation angle. A numerical view-factor model was developed to analyze the irradiance distributions. Four irradiation angles, 30°, 45°, 60°, and 90°, were chosen. The results show that the lamps operating with an irradiation angle of 45° provide the highest chamber-averaged irradiance. This suggests an optimal irradiance level for a given room dimension, as inferred from the view factor model. Experimental results indicated that the overlapping mode with a 45° irradiation angle consistently outperformed both the stationary mode and rotating mode in disinfection. This can be attributed to the higher chamber-averaged irradiance, which is also supported by the numerical model predictions. The increment ratios ranged from 14.9 % to 42.9 % compared to the stationary mode. The susceptibility constants of Escherichia coli, Staphylococcus epidermidis, MS2, and P22 were measured as 0.572 m2/J, 0.099 m2/J, 0.060 m2/J, and 0.081 m2/J respectively.

Photodynamic toluidine blue-gold nanoconjugates as a novel therapeutic for Staphylococcal biofilms

Staphylococci are among the most frequent bacteria known to cause biofilm-related infections. Pathogenic biofilms represent a global healthcare challenge due to their high tolerance to antimicrobials. In this study, water soluble polyethylene glycol (PEG)-coated gold nanospheres (28 ppm) and nanostars (15 ppm) with electrostatically adsorbed photosensitizer (PS) Toluidine Blue O (TBO) ∼4 μM were successfully synthesized and characterized as PEG-GNPs@TBO and PEG-GNSs@TBO. Both nanoconjugates and the TBO 4 μM solution showed remarkable, if similar, antimicrobial photodynamic inactivation (aPDI) effects at 638 nm, inhibiting the formation of biofilms by two Staphylococcal strains: a clinical methicillin-resistant Staphylococcus aureus (MRSA) isolate and Staphylococcus epidermidis (S. epidermidis) RP62A. Alternatively in biofilm eradication treatments, the aPDI effects of PEG-GNSs@TBO were more effective and yielded a 75% and 50% reduction in viable count of MRSA and S. epidermidis RP62A preformed biofilms, respectively and when compared with untreated samples. This reduction in viable count was even greater than that obtained through aPDI treatment using a 40 μM TBO solution. Confocal laser microscopy (CLSM) and scanning electron microscope (SEM) images of PEG-GNSs@TBO's aPDI treatments revealed significant changes in the integrity and morphology of biofilms, with fewer colony masses. The generation of reactive oxygen species (ROS) upon PEG-GNSs@TBO's aPDI treatment was detected by CLSM using a specific ROS fluorescent probe, demonstrating bright fluorescence red spots across the surfaces of the treated biofilms. Our findings shine a light on the potential synergism between gold nanoparticles (AuNPs) and photosensitizers in developing novel nanoplatforms to target Staphylococcal biofilm related infections.

Recent advances in nanomaterial-mediated bacterial molecular action and their applications in wound therapy

Because of the multi-pathway antibacterial mechanisms of nanomaterials, they have received widespread attention in wound therapy. However, owing to the complexities of bacterial responses toward nanomaterials, antibacterial molecular mechanisms remain unclear, making it difficult to rationally design highly efficient antibacterial nanomaterials. Fortunately, molecular dynamics simulations and omics techniques have been used as effective methods to further investigate the action targets of nanomaterials. Therefore, the review comprehensively analyzes the antibacterial mechanisms of nanomaterials from the morphology-dependent antibacterial activity and physicochemical/optical properties-dependent antibacterial activity, which provided guidance for constructing excellently efficient and broad-spectrum antibacterial nanomaterials for wound therapy. More importantly, the main molecular action targets of nanomaterials from the membranes, DNA, energy metabolism pathways, oxidative stress defense systems, ribosomes, and biofilms are elaborated in detail. Furthermore, nanomaterials used in wound therapy are reviewed and discussed. Finally, future directions of nanomaterials from mechanisms to nanomedicine are further proposed.

Effects on Colonization Factors and Mechanisms Involved in Antimicrobial Sonophotodynamic Inactivation Mediated by Curcumin

Photodynamic (PDI) and sonodynamic (SDI) inactivation have been successfully employed as antimicrobial treatments. Moreover, sonophotodynamic inactivation (SPDI), which is the simultaneous application of PDI and SDI, has demonstrated greater effects. This study assessed the effects of PDI (PDI group), SDI (SDI group) and SPDI (SPDI group) using curcumin as a sensitizer on the metabolism, adhesion capability, biofilm formation ability and structural effects in a Staphylococcus aureus biofilm. Moreover, the production of reactive oxygen species (ROS) and the degradation spectrum of curcumin under the irradiation sources were measured. SPDI was more effective in inactivating the biofilm than PDI and SDI. All treatments reduced the adhesion ability of the bacteria: 58 ± 2%, 58 ± 1% and 71 ± 1% of the bacterial cells adhered to the polystyrene plate after the SPDI, SDI and PDI, respectively, when compared to 79 ± 1% of the untreated cells (control group). This result is probably related to the metabolism cell reduction after treatments. The metabolism of cells from the PDI group was 89 ± 1% lower than the untreated cells, while the metabolic activity of SDI and SPDI groups were 82 ± 2% and 90 ± 1% lower, respectively. Regarding the biofilm formation ability, all treatments (SPDI, SDI and PDI) reduced the total biomass. The total biomass of the PDI, SDI and SPDI groups were 26 ± 2%, 31 ± 5% and 35 ± 6% lower than the untreated biofilm (control group), respectively. Additionally, all treatments produced ROS and caused significant structural changes, reducing cells and the extracellular matrix. The light caused a greater absorbance decay of the curcumin; however, the US did not expressively alter its spectrum. Finally, SPDI had improved antimicrobial effects, and all treatments exhibited similar effects in the colonization factors evaluated.

Photodynamic Therapy and Its Synergism with Melittin Against Drug-Resistant Acinetobacter baumannii Isolates with High Biofilm Formation Ability

Drug-resistant biofilm producer A. baumannii isolates are a global concern that warns researchers about the development of new treatments. This study was designed to analyze the effect of photodynamic therapy (PDT) as monotherapy and associated with melittin on multidrug-resistant A. baumannii isolates. Sub-lethal doses of photosensitizer, LED, and PDT were determined. The PDT effect on the biofilm and expression of biofilm-associated genes was evaluated by scanning electron microscopy and quantitative real-time PCR (qRT-PCR) methods, respectively. The synergistic effect of PDT and melittin on the survival of MDR/XDR strong biofilm producer isolates was evaluated by checkerboard assay. Survival rates were significantly decreased at the lowest concentration of 12.5-50 μg/ml in 4 min at an energy density of 93.75 J/cm2 (P < 0.05). The optimized PDT method had a bactericidal effect against all tested groups, and the mean expression levels of csu, abaI, bap, and ompA genes in the strong biofilm producers were decreased significantly compared to the control group. The combined effect of LED and melittin successfully reduced the MDR/XDR A. baumannii strong biofilm producers' growth from 3.1 logs. MB-mediated aPDT and combined treatment of PDT with melittin, which has been investigated for the first time in this study, can be an efficient strategy against MDR/XDR A. baumannii isolates with strong biofilm production capacity.

Recent Advances in Collagen Antimicrobial Biomaterials for Tissue Engineering Applications: A Review

Biomaterial-based therapies have been receiving attention for treating microbial infections mainly to overcome the increasing number of drug-resistant bacterial strains and off-target impacts of therapeutic agents by conventional strategies. A fibrous, non-soluble protein, collagen, is one of the most studied biopolymers for the development of antimicrobial biomaterials owing to its superior physicochemical, biomechanical, and biological properties. In this study, we reviewed the different approaches used to develop collagen-based antimicrobial devices, such as non-pharmacological, antibiotic, metal oxide, antimicrobial peptide, herbal extract-based, and combination approaches, with a particular focus on preclinical studies that have been published in the last decade.

Photoantimicrobials in agriculture

Classical approaches for controlling plant pathogens may be impaired by the development of pathogen resistance to chemical pesticides and by limited availability of effective antimicrobial agents. Recent increases in consumer awareness of and/or legislation regarding environmental and human health, and the urgent need to improve food security, are driving increased demand for safer antimicrobial strategies. Therefore, there is a need for a step change in the approaches used for controlling pre- and post-harvest diseases and foodborne human pathogens. The use of light-activated antimicrobial substances for the so-called antimicrobial photodynamic treatment is known to be effective not only in a clinical context, but also for use in agriculture to control plant-pathogenic fungi and bacteria, and to eliminate foodborne human pathogens from seeds, sprouted seeds, fruits, and vegetables. Here, we take a holistic approach to review and re-evaluate recent findings on: (i) the ecology of naturally-occurring photoantimicrobials, (ii) photodynamic processes including the light-activated antimicrobial activities of some plant metabolites, and (iii) fungus-induced photosensitization of plants. The inhibitory mechanisms of both natural and synthetic light-activated substances, known as photosensitizers, are discussed in the contexts of microbial stress biology and agricultural biotechnology. Their modes-of-antimicrobial action make them neither stressors nor toxins/toxicants (with specific modes of poisonous activity), but a hybrid/combination of both. We highlight the use of photoantimicrobials for the control of plant-pathogenic fungi and quantify their potential contribution to global food security.

Selenophene-Modified Boron Dipyrromethene-Based Photosensitizers Exhibit Photodynamic Inhibition on a Broad Range of Bacteria

Microorganisms are crucial for human survival in view of both mutualistic and pathogen interactions. The control of the balance could be achieved by use of the antibiotics. There is a continuous arms race that exists between the pathogen and the antibiotics. The emergence of multidrug-resistant (MDR) bacteria threatens health even for insignificant injuries. However, the discovery of new antibiotics is not a fast process, and the healthcare system will suffer if the evolution of MDR lingers in its current frequency. The cationic photosensitizers (PSs) provide a unique approach to develop novel, light-inducible antimicrobial drugs. Here, we examine the antimicrobial activity of innovative selenophene-modified boron dipyrromethene (BODIPY)-based PSs on a variety of Gram (+) and Gram (-) bacteria. The candidates demonstrate a level of confidence in both light-dependent and independent inhibition of bacterial growth. Among them, selenophene conjugated PS candidates (BOD-Se and BOD-Se-I) are promising agents to induce photodynamic inhibition (PDI) on all experimented bacteria: E. coli, S. aureus, B. cereus, and P. aeruginosa. Further characterizations revealed that photocleavage ability on DNA molecules could be potentially advantageous over extracellular DNA possessing biofilm-forming bacteria such as B. cereus and P. aeruginosa. Microscopy analysis with fluorescent BOD-H confirmed the colocalization on GFP expressing E. coli.

Insights on the polypyrrole based nanoformulations for photodynamic therapy

This review is written to endow updated information on polypyrrole based photosensitizers for the treatment of deadly diseases such as cancer and microbial infection. Tetrapyrrolic macromolecules such as porphyrins and phthalocyanines hold unique photophysical properties which make them very useful compounds for various biomedical applications. Besides their properties, they also have some limitations such as low water solubility, bioavailability, biocompatibility and lack of specificity, etc. Researchers are trying to overcome these limitations by incorporating photosensitizers into the different types of nanoparticles and improve the quality of photodynamic therapy. We have contributed to this field by synthesizing and developing polypyrrolic photosensitizer based nanoparticles for potential applications in antimicrobial and anticancer photodynamic activity. Throughout this review, newly synthesized and existing PSs conjugated/encapsulated/doped/incorporated with nanoparticles are emphasized, which are essential for current and future research themes. Also in this review, we briefly summarized the research work carried over the past few years by considering the porphyrin based photosensitizers as alternative therapeutic entities for the treatment of microbial infections, cancers, and many other diseases.

Promising photodynamic antimicrobial activity of polyimine substituted zinc phthalocyanine and its polycationic derivative when conjugated to nitrogen, sulfur, co-doped graphene quantum dots against Staphylococcus aureus

Antimicrobial resistance is a most important problem facing the treatment of infectious diseases. Antimicrobial photodynamic therapy is an alternative treatment strategy, considered to be cost-effective and feasible. For this purpose, octa-imine substituted ZnPc (3) have been prepared and conjugated to nitrogen, sulfur co-doped graphene quantum dots (N,S-GQDs) through π-π stacking. The photophysical and photochemical properties of Pc alone and and Pc-conjugated to the GQD nanomaterial such as absorption, fluorescence, fluorescence life time, singlet oxygen quantum yields, triplet state quantum yields and exited state lifetimes were investigated in solutions before in vitro cell studies. The PACT activity of prepared structures was investigated against Gram-positive (Staphylococcus aureus). Our results suggest that the in the case of conjugation of zinc Pc to N,S-GQDs, photodynamic inactivation increased with the 100 % reduction percentage.

Current approaches and future prospects of nanofibers: a special focus on antimicrobial drug delivery

Antibacterial nanofibers have a great potential for effective treatment of infections. They act as drug reservoir systems that release higher quantities of antibacterial agents/drug in a controlled manner at infection sites and prevent drug resistance, while concomitantly decreasing the systemic toxicity. With this drug delivery system, it is also possible to achieve multiple drug entrapment and also simultaneous or sequential release kinetics at the site of action. Therefore, advances in antibacterial nanofibers as drug delivery systems were overviewed within this article. Recently published data on antibacterial drug delivery was also summarised to provide a view of the current state of art in this field. Although antibacterial use seems to be limited and one can ask that 'what is left to be discovered?'; recent update literatures in this field highlighted the use of nanofibers from very different perspectives. We believe that readers will be benefiting this review for enlightening of novel ideas.

The application of antimicrobial photodynamic inactivation on methicillin-resistant S. aureus and ESBL-producing K. pneumoniae using porphyrin photosensitizer in combination with silver nanoparticles

As resistance of bacterial strains to antibiotics is a major problem, there is a need to look for alternative treatments. One option is antimicrobial photodynamic inactivation (aPDI). The pathogenic cells are targeted by a nontoxic photosensitizer while the surrounding healthy tissue is relatively unaffected. The photosensitizer is activated by light of t appropriate wavelength resulting in the generation of reactive oxygen species that are cytotoxic for the pathogens. In this work, the photosensitizer TMPyP and silver nanoparticles (AgNPs) were investigated for their synergistic antibacterial effect. We tested these two substances on two bacterial strains, methicillin-resistant Staphylococcus aureus 4591 (MRSA) and extended-spectrum beta-lactamases-producing Klebsiella pneumoniae 2486 (ESBL-KP), to compare their effectiveness. The bacteria were first incubated with TMPyP for 45 min or 5 h, then irradiated with a LED source with the total fluence of 10 or 20 J/cm² and then placed in a microbiological growth medium supplemented with AgNPs. To accomplish the synergistic effect, the optimal combination of TMPyP and AgNPs was estimated as 1.56-25 μM for TMPyP and 3.38 mg/l for AgNPs in case of MRSA and 1.56-50 μM for TMPyP and 3.38 mg/l for AgNPs in case of ESBL-KP at 45 min incubation with TMPyP and fluence of 10 J/cm². Longer incubation and/or longer irradiation led to a decrease in the maximum values of the photosensitizer concentration to produce the synergistic effect. From this work it can be concluded that the combination of antimicrobial photodynamic inactivation with a treatment including silver nanoparticles could be a promising approach to treat bacterial infection.

Antibacterial Hybrid Hydrogels

Bacterial infectious diseases and bacterial-infected environments have been threatening the health of human beings all over the world. In view of the increased bacteria resistance caused by overuse or improper use of antibiotics, antibacterial biomaterials are developed as the substitutes for antibiotics in some cases. Among them, antibacterial hydrogels are attracting more and more attention due to easy preparation process and diversity of structures by changing their chemical cross-linkers via covalent bonds or noncovalent physical interactions, which can endow them with various specific functions such as high toughness and stretchability, injectability, self-healing, tissue adhesiveness and rapid hemostasis, easy loading and controlled drug release, superior biocompatibility and antioxidation as well as good conductivity. In this review, the recent progress of antibacterial hydrogel including the fabrication methodologies, interior structures, performances, antibacterial mechanisms, and applications of various antibacterial hydrogels is summarized. According to the bacteria-killing modes of hydrogels, several representative hydrogels such as silver nanoparticles-based hydrogel, photoresponsive hydrogel including photothermal and photocatalytic, self-bacteria-killing hydrogel such as inherent antibacterial peptides and cationic polymers, and antibiotics-loading hydrogel are focused on. Furthermore, current challenges of antibacterial hydrogels are discussed and future perspectives in this field are also proposed.

Photodynamic antimicrobial chemotherapy in mice with Pseudomonas aeruginosa-infected wounds

This study examined the antibacterial effect of protoporphyrin IX–ethylenediamine derivative (PPIX-ED)–mediated photodynamic antimicrobial chemotherapy (PPIX-ED-PACT) against Pseudomonas aeruginosa in vitro and in vivo. PPIX-ED potently inhibited the growth of Pseudomonas aeruginosa by inducing reactive oxygen species production via photoactivation. Atomic force microscopy revealed that PPIX-ED-PACT induced the leakage of bacterial content by degrading the bacterial membrane and wall. As revealed using acridine orange/ethidium bromide staining, PPIX-ED-PACT altered the permeability of the bacterial membrane. In addition, the antibacterial effect of PPIX-ED-PACT was demonstrated in an in vivo model of P. aeruginosa-infected wounds. PPIX-ED (100 μM) decreased the number of P. aeruginosa colony-forming units by 4.2 log₁₀. Moreover, histological analysis illustrated that the wound healing rate was 98% on day 14 after treatment, which was 10% higher than that in the control group. According to the present findings, PPIX-ED-PACT can effectively inhibit the growth of P. aeruginosa in vitro and in vivo.

Synthesis and In Vitro Photodynamic Activity of Cationic Boron Dipyrromethene-Based Photosensitizers against Methicillin-Resistant Staphylococcus aureus

A series of cationic boron dipyrromethene (BODIPY) derivatives were synthesized and characterized with various spectroscopic methods. Having the ability to generate singlet oxygen upon irradiation, these compounds could potentially serve as photosensitizers for antimicrobial photodynamic therapy. Of the five BODIPYs being examined, the dicationic aza-BODIPY analogue (compound 5) demonstrated the highest potency against a broad spectrum of clinically relevant methicillin-resistant Staphylococcus aureus (MRSA), including four ATCC-type strains (ATCC 43300, ATCC BAA-42, ATCC BAA-43, and ATCC BAA-44), two strains carrying specific antibiotic resistance mechanisms [-AAC(6')-APH(2") and RN4220/pUL5054], and ten non-duplicate clinical strains from hospital- and community-associated MRSAs of the important clonal types ST239, ST30, and ST59, which have previously been documented to be prevalent in Hong Kong and its neighboring countries. The in vitro anti-MRSA activity of compound 5 was achieved upon irradiation with near-infrared light (>610 nm) with minimal bactericidal concentrations (MBCs) ranging from 12.5 to 25 µM against the whole panel of MRSAs, except the hospital-associated MRSAs for which the MBCs were in the range of 50-100 µM. Compound 5 was significantly (p < 0.05) more potent than methylene blue, which is a clinically approved photosensitizer, indicating that it is a promising antimicrobial agent that is worthy of further investigation.

In vitro antimicrobial photodynamic inactivation of multidrug-resistant Acinetobacter baumannii biofilm using Protoporphyrin IX and Methylene blue

BACKGROUND

Acinetobacter baumannii is a challenging pathogen due to the rapid development of antimicrobial resistance and biofilm formation. The objective of this study was to evaluate the effect of antimicrobial photodynamic inactivation against biofilms of multidrug-resistant A. baumannii isolated from clinical, abattoir and aquatic sources.

METHODS

The isolates were tested for susceptibility to imipenem, meropenem, tigecycline and colistin using autoSCAN-4 automated system and rechecked by the E-test. Methylene blue, Protoporphyrin IX, and a halogen lamp were used in the in vitro assay against biofilms of the isolates. The antimicrobial photodynamic inactivation was assessed by counting colony-forming units (CFU).

RESULTS

The isolates from abattoir and aquatic sources were resistant to carbapenems (>64 μg/mL) but susceptible to tigecycline (2 μg/mL) and colistin (Abattoir, 0.35 μg/mL and Aquatic, 0.24 μg/mL), whereas the clinical isolate was susceptible to only colistin (0.5 μg/mL) using the E-test. The log survival percentages of the control group at a concentration of 20 μM were 5 × 10^-6 % for Protoporphyrin IX and 2 × 10^-6 % for Methylene blue. Therefore, Methylene blue showed higher bacterial reduction of 7.0 log₁₀ colony forming units than 6.0 log₁₀ for Protoporphyrin IX. No significant difference was observed with respect to the origin of isolates and the minimum inhibitory concentrations.

CONCLUSION

The results indicate that antimicrobial photodynamic inactivation could be an alternative strategy for the control of infections caused by multi-drug resistant A. baumannii by significantly reducing biofilm growth at a sub-lethal concentrations.

Carbon quantum dots: A bright future as photosensitizers for in vitro antibacterial photodynamic inactivation

Carbon nanomaterials have increasingly gained the attention of the nano-, photo- and biomedical communities owing to their unique photophysical properties. Here, we facilely synthesized carbon quantum dots (CQDs) in a one-pot solvothermal reaction, and demonstrated their utility as photosensitizers for in vitro antibacterial photodynamic inactivation (aPDI). The bottom-up synthesis employed inexpensive and sustainable starting materials (citric acid), used ethanol as an environmentally-friendly solvent, was relatively energy efficient, produced minimal waste, and purification was accomplished simply by filtration. The CQDs were characterized by both physical (TEM, X-ray diffraction) and spectroscopic (UV-visible, fluorescence, and ATR-FTIR) methods, which together confirmed their nanoscale dimensions and photophysical properties. aPDI studies demonstrated detection limit inactivation (99.9999 + %) of Gram-negative Escherichia coli 8099 and Gram-positive Staphylococcus aureus ATCC-6538 upon visible light illumination (λ ≥ 420 nm, 65 ± 5 mW/cm2; 60 min). Post-illumination SEM images of the bacteria incubated with the CQDs showed perforated and fragmented cell membranes consistent with damage from reactive oxygen species (ROS), and mechanistic studies revealed that the bacteria were inactivated by singlet oxygen, with no discernable roles for other ROS (e.g., superoxide or hydroxyl radicals). These findings demonstrated that CQDs can be facilely prepared, operate via a Type II mechanism, and are effective photosensitizers for in vitro aPDI.

Towards microbe-targeted photosensitizers: Synthesis, characterization and in vitro photodynamic inactivation of the tuberculosis model pathogen M. smegmatis by porphyrin-peptide conjugates

Porphyrin-peptide conjugates have a breadth of potential applications, including use in photodynamic therapy, boron neutron capture therapy, as fluorescence imaging tags for tracking subcellular localization, as magnetic resonance imaging (MRI) positive-contrast reagents and as biomimetic catalysts. Here, we have explored three general routes to porphyrin-peptide conjugates using the Cu(I)-catalyzed Huisgen-Medal-Sharpless 1,3-dipolar cycloaddition of peptide-containing azides with a terminal alkyne-containing porphyrin, thereby generating porphyrin-peptide conjugates (PPCs) comprised of a cationic porphyrin coupled to short antimicrobial peptides. In addition to characterizing the PPCs using a variety of spectroscopic (UV-vis, [Formula: see text]H- and [Formula: see text]C-NMR) and mass spectrometric methods, we evaluated their efficacy as photosensitizers for the in vitro photodynamic inactivation of Mycobacterium smegmatis as a model for the pathogen Mycobacterium tuberculosis. Difficulties that needed to be overcome for the efficient synthesis of PPCs were the limited solubility of the quaternized pyridyl porphyrin in common solvents, undesired (de)metallation and transmetallation, and chromatographic purification. Photodynamic inactivation studies of a small library of PPCs against Mycobacterium smegmatis confirmed our hypothesis that the porphyrin-based photosensitizer maintains its ability to efficiently inactivate bacteria when conjugated to a small peptide by upwards of 5–6 log units (99.999[Formula: see text]%) using white light illumination (400–700 nm, 60 mW/cm[Formula: see text], 30 min). Further, hemolysis assays revealed the lack of toxicity of the PPCs against sheep blood at concentrations employed for in vitro photodynamic inactivation. Taken together, the results demonstrated the ability of PPCs to maintain their antimicrobial photodynamic inactivation efficacy when possessing a short cationic peptides for enabling the potential targeting of pathogens in vivo.

Curcumin induced photodynamic therapy mediated suppression of quorum sensing pathway of Pseudomonas aeruginosa: An approach to inhibit biofilm in vitro

OBJECTIVE

The objective of this study was to inhibit the Pseudomonas aeruginosa biofilm through curcumin-mediated antimicrobial photodynamic therapy (A-PDT).

BACKGROUND

The mechanism behind A-PDT mediated photoinactivation depend upon reactive oxygen species (ROS) production, like singlet oxygen and free radicals.

METHODS

To evaluate the antibacterial efficacy of curcumin induced A-PDT on P. aeruginosa by colony forming unit (CFU) while antibiofilm action was determined by the use of crystal violet, XTT, congored binding assay and confocal laser scanning microscope (CLSM).

RESULTS

We found that curcumin with 10 J/cm² of light reduces P. aeruginosa biofilm more efficiently than without light. Extracellular polymeric substances (EPS) production was also reduced by approx 94 % with 10 J/cm² of light dose. CLSM images showed that the thickness of biofilms were reduced from >30 μm to <5 μm after treatment with curcumin followed by 10 J/cm² of light irradiation. Curcumin showed better bacteriostatic activity than bactericidal activity. Singlet oxygen is primarily responsible for photodamage and cytotoxic reactions caused by curcumin-mediated APDT. Genes involved in quorum sensing (QS) pathway was also found to be inhibited after APDT. Curcumin with 5 J/cm² light inhibits QS genes and on increasing light dose i.e10 J/cm², we found a drastic reduction in gene expression.

CONCLUSION

We conclude that the curcumin mediated A-PDT inhibits biofilm formation ofP. aeruginosa through QS pathway by the action of singlet oxygen generation which in turn reduced EPS of the biofilm.

Fluorine-substituted tetracationic ABAB-phthalocyanines for efficient photodynamic inactivation of Gram-positive and Gram-negative bacteria

Herein, we report the synthesis and characterization of new amphiphilic phthalocyanines (Pcs), the study of their singlet oxygen generation capabilities, and biological assays to determine their potential as photosensitizers for photodynamic inactivation of bacteria. In particular, Pcs with an ABAB geometry (where A and B refer to differently substituted isoindole constituents) have been synthesized. These molecules are endowed with bulky bis(trifluoromethylphenyl) groups in two facing isoindoles, which hinder aggregation and favour singlet oxygen generation, and pyridinium or alkylammonium moieties in the other two isoindoles. In particular, two water-soluble Pc derivatives (PS-1 and PS-2) have proved to be efficient in the photoinactivation of S. aureus and E. coli, selected as models of Gram-positive and Gram-negative bacteria.

Dual Metal-Organic Framework Heterointerface

Herein, a core-shell dual metal-organic framework (MOF) heterointerface is synthesized. The Prussian blue (PB) MOF acts as a core for the growth of a porphyrin-doped MOF which is named PB@MOF. Porphyrins can significantly enhance the transfer of photoinspired electrons from PB and suppress the recombination of electrons and holes, thus enhancing the photocatalytic properties and consequently promoting the yields of singlet oxygen rapidly under 660 nm illumination. PB@MOF can exhibit a better photothermal conversion efficiency up to 29.9% under 808 nm near-infrared irradiation (NIR). The PB@MOF heterointerface can possess excellent antibacterial efficacies of 99.31% and 98.68% opposed to Staphylococcus aureus and Escherichia coli, separately, under the dual light illumination of 808 nm NIR and 660 nm red light for 10 min. Furthermore, the trace amount of Fe and Zr ions can trigger the immune system to favor wound healing, promising that PB@MOF achieves the rapid therapy of bacterial infected wounds and environmental disinfection.

BODIPY-embedded electrospun materials in antimicrobial photodynamic inactivation

Drug-resistant pathogens, particularly those that result in hospital acquired infections (HAIs), have emerged as a critical priority for the World Health Organization. To address the need for self-disinfecting materials to counter the threat posed by the transmission of these pathogens from surfaces to new hosts, here we investigated if a cationic BODIPY photosensitizer, embedded via electrospinning into nylon and polyacrylonitrile (PAN) nanofibers, was capable of inactivating both bacteria and viruses via antimicrobial photodynamic inactivation (aPDI). Materials characterization, including fiber morphology and the degree of photosensitizer loading, was assessed by scanning electron microscopy (SEM), thermal gravimetric analysis (TGA), and UV-visible diffuse reflectance spectroscopy (UV-Vis DRS), and demonstrated that the materials were comprised of nanofibers (125-215 nm avg. diameter) that were thermostable to >300 °C. The antimicrobial potencies of the resultant Nylon-BODIPY⁽⁺⁾ and PAN-BODIPY⁽⁺⁾ nanofiber materials were evaluated against four strains of bacteria recognized by the World Health Organization as either critical or high priority pathogens: Gram-positive strains methicillin-resistant S. aureus (MRSA; ATCC BAA-44) and vancomycin-resistant E. faecium (VRE; ATCC BAA-2320), and Gram-negative strains multidrug-resistant A. baumannii (MDRAB; ATCC BAA-1605) and NDM-1 positive K. pneumoniae (KP; ATCC BAA-2146). Our results demonstrated the detection limit (99.9999%; 6 log units reduction in CFU mL^-1) photodynamic inactivation of three strains upon illumination (30-60 min; 40-65 ± 5 mW cm^-2; 400-700 nm): MRSA, VRE, and MDRAB, but only minimal inactivation (47-75%) of KP. Antiviral studies employing PAN-BODIPY⁽⁺⁾ against vesicular stomatitis virus (VSV), a model enveloped virus, revealed complete inactivation. Taken together, the results demonstrate the potential for electrospun BODIPY⁽⁺⁾-embedded nanofiber materials as the basis for pathogen-specific anti-infective materials, even at low photosensitizer loadings.

Carbon@polypyrrole nanotubes as a photosensitizer in laser phototherapy of Pseudomonas aeruginosa

Phototherapy has been offered as an alternative and promising antibacterial strategy to overcome the antibiotic resistance problem. This study evaluated the antibacterial and phototherapy effects of carbon nanotubes with a polypyrrole coating in a core@shell structure (CNTs@PPy) on Pseudomonas aeruginosa (P. aeruginosa). P. aeruginosa was treated with CNTs@PPy at different concentrations (50-500 μg mL^-1) in dark or laser light irradiation with a wavelength of 808 nm, a power density of 1000 mW cm^-2 for 20 min. Temperature increment, cell viability, formation of reactive oxygen species (ROS) and protein/nucleic acid leakage subsequent the P. aeruginosa treatment were evaluated. The results showed that near-infrared laser irradiation of CNTs@PPy caused to a temperature increment confirming the ability of powerful photokilling of P. aeruginosa in a photothermal route. On the other hand, while CNTs@PPy represented just a 30-50% P. aeruginosa killing rate in dark, laser irradiation of 250 and 500 μg mL^-1 concentrations of CNTs@PPy resulted in a ˜70% P. aeruginosa killing rate, along with significant ROS production into the medium and protein and nucleic acid leakage from P. aeruginosa. These later effects were assigned to a photodynamic route activity of CNTs@PPy upon laser irradiation. Therefore, CNTs@PPy acted as a photosensitizer in both photothermal and photodynamic therapies to present an enhanced bactericidal activity to annihilate and destroyed the gram-negative bacteria P. aeruginosa, a cause of many infectious diseases.

Porphyrinoid photosensitizers mediated photodynamic inactivation against bacteria

The multi-drug resistant bacteria have become a serious problem complicating therapies to such a degree that often the term "post-antibiotic era" is applied to describe the situation. The infections with methicillin-resistant S. aureus, vancomycin-resistant E. faecium, third generation cephalosporin-resistant E. coli, third generation cephalosporin-resistant K. pneumoniae and carbapenem-resistant P. aeruginosa have become commonplace. Thus, the new strategies of infection treatment have been searched for, and one of the approaches is based on photodynamic antimicrobial chemotherapy. Photodynamic protocols require the interaction of photosensitizer, molecular oxygen and light. The aim of this review is to provide a comprehensive overview of photodynamic antimicrobial chemotherapy by porphyrinoid photosensitizers. In the first part of the review information on the mechanism of photodynamic action and the mechanism of the bacteria resistance to the photodynamic technique were described. In the second one, it was described porphyrinoids photosensitizers like: porphyrins, chlorins and phthalocyanines useable in photodynamic bacteria inactivation.

Multimodal use of the porphyrin TMPyP: From cancer therapy to antimicrobial applications

The cationic porphyrin meso-tetra(4-[Formula: see text]-methylpyridyl)porphine (TMPyP) has a high yield of singlet oxygen generation upon light activation and a strong affinity for DNA. These advantageous properties have turned it into a promising photosensitizer for use in photodynamic therapy (PDT). In this review, we have summarized the current state-of-the-art applications of TMPyP for the treatment of cancer as well as its implementation in antimicrobial PDT. The most relevant studies reporting its pharmacokinetics, subcellular localization, mechanism of action, tissue biodistribution and dosimetry are discussed. Combination strategies using TMPyP-PDT together with other photosensitizers and chemotherapeutic agents to achieve synergistic anti-tumor effects and reduce resistance to therapy are also explored. Finally, we have addressed emerging applications of this porphyrin, including nanoparticle-mediated delivery, controlled drug release, biosensing and G-quadruplex stabilization for tumor growth inhibition. Altogether, this work highlights the great potential and versatility that TMPyP can offer in different fields of biomedicine such us cancer treatment or antimicrobial therapy.

Antimicrobial photodynamic therapy against Staphylococcus aureus using zinc phthalocyanine and zinc phthalocyanine-integrated TiO2 nanoparticles

Antibiotic resistance is an increasing healthcare problem worldwide. In the present study, the effects of antimicrobial photodynamic therapy (APDT) of ZnPc and ZnPc-integrated TiO2 nanoparticles (ZnPc-TiO[Formula: see text] were investigated against Staphylococcus aureus. A light emitting diode (LED) (630–700 nm, 17.4 mW/cm[Formula: see text] was used on S. aureus at different light doses (8 J/cm2 for 11 min, 16 J/cm2 for 22 min, 24 J/cm2 for 33 min) in the presence of the compounds under the minimum inhibitory concentration values. Both compounds showed similar phototoxicity toward S. aureus when high light doses (16 and 24 J/cm[Formula: see text] were applied. In addition, the success of APDT increased with an increasing light dose.

Nanostructured photosensitizer based on a tetracationic derivative of bacteriochlorin for antibacterial photodynamic therapy

Making antibacterial PDT more effective is a task that calls for the development of photosensitizers (PS) based on polycationic synthetic bacteriochlorins and subsequent analysis of properties of such photosensitizers. This study aimed to explore photophysical and antibacterial properties of the nanostructured PS based on 3-Py4BSHp4Br4, tetracationic amphiphilic derivative of synthetic bacteriochlorin. The PS was solubilized in a 4% Kolliphor ELP to obtain its nanostructured dispersion. We researched the absorption and fluorescence spectra intensity and profiles, studying concentrations from 0.001 to 0.2 mM, and found that the aggregation level of the PS in question is low throughout the range investigated while the S. aureus (gram-positive) and P. aeruginosa and K. pneumoniae (gram-negative) PD inactivation effectiveness is high.

Novel Polycationic Photosensitizers for Antibacterial Photodynamic Therapy

Antibacterial photodynamic therapy (APDT) is a promising method of treating local infected foci, in particular, surgical and burn wounds, trophic and diabetic ulcers. Photodynamic inactivation (PDI) is able to effectively destroy bacterial cells without them developing resistance in response to treatment.This work was dedicated to the study of photophysical and antibacterial properties of new photosensitizers (PS) based on polycationic phthalocyanines and synthetic bacteriochlorins for photodynamic inactivation of P. aeruginosa bacteria and their biofilms. Gram-negative bacteria P. aeruginosa are often found in infected wounds, presumably in biofilm state and are characterized by rather low susceptibility to APDT, which is a problem. PS were studied for possible aggregation at various concentrations by means of absorption and fluorescence spectroscopy. The results of studies of the ZnPcChol₈, (3-PyHp)₄BCBr₄ and (3-PyEBr)₄BCBr₄ in water and serum confirm the assumption of a low degree of their aggregation at high concentrations.Consequently, their photodynamic efficiency is high enabling to use these PS at high concentrations to sensitize pathological foci for APDT.It was shown that all the investigated PS had a high efficiency of photodynamic inactivation of Gram-negative bacteria P. aeruginosa, as well as their biofilms. Tetracationic hydrophilic near-infrared photosensitizer (3-PyEBr)₄BCBr₄ with reduced molecule size had significantly higher efficacy of photodynamic inactivation of P. aeruginosa biofilms compared with other studied photosensitizers.

Photodynamic antimicrobial activity of new porphyrin derivatives against methicillin resistant Staphylococcus aureus

Methicillin resistant Staphylococcus aureus (MRSA) with multiple drug resistance patterns is frequently isolated from skin and soft tissue infections that are involved in chronic wounds. Today, difficulties in the treatment of MRSA associated infections have led to the development of alternative approaches such as antimicrobial photodynamic therapy. This study aimed to investigate photoinactivation with cationic porphyrin derivative compounds against MRSA in in-vitro conditions. In the study, MRSA clinical isolates with different antibiotic resistance profiles were used. The newly synthesized cationic porphyrin derivatives (P_M, P_E, P_PN, and P_PL) were used as photosensitizer, and 655 nm diode laser was used as light source. Photoinactivation experiments were performed by optimizing energy doses and photosensitizer concentrations. In photoinactivation experiments with different energy densities and photosensitizer concentrations, more than 99% reduction was achieved in bacterial cell viability. No decrease in bacterial survival was observed in control groups. It was determined that there was an increase in photoinactivation efficiency by increasing the energy dose. At the energy dose of 150 J/cm² a survival reduction of over 6.33 log₁₀ was observed in each photosensitizer type. While 200 μM P_M concentration was required for this photoinactivation, 12.50 μM was sufficient for P_E, P_PN, and P_PL. In our study, antimicrobial photodynamic therapy performed with cationic porphyrin derivatives was found to have potent antimicrobial efficacy against multidrug resistant S. aureus which is frequently isolated from wound infections.

Exploring photoinactivation of microbial biofilms using laser scanning microscopy and confined 2-photon excitation

One pertinent complication in bacterial infection is the growth of biofilms, that is, communities of surface-adhered bacteria resilient to antibiotics. Photodynamic inactivation (PDI) has been proposed as an alternative to antibiotic treatment; however, novel techniques complementing standard efficacy measures are required. Herein, we present an approach employing multiphoton microscopy complemented with Airyscan super-resolution microscopy, to visualize the distribution of curcumin in Staphylococcus epidermidis biofilms. The effects of complexation of curcumin with hydroxypropyl-γ-cyclodextrin (HPγCD) were studied. It was shown that HPγCD curcumin demonstrated higher bioavailability in the biofilms compared to curcumin, without affecting the subcellular uptake. Spectral quantification following PDI demonstrates a method for monitoring elimination of biofilms in real time using noninvasive 3D imaging. Additionally, spatially confined 2-photon inactivation was demonstrated for the first time in biofilms. These results support the feasibility of advanced optical microscopy as a sensitive tool for evaluating treatment efficacy in biofilms toward improved mechanistic studies of PDI.

Photoactivated 2,3-distyrylindoles kill multi-drug resistant bacteria

Compounds based on the 2,3-distyrylindole scaffold were found to exhibit bactericidal properties upon irradiation with white light. At the concentration of 1 μM, the lead compound 1 completely (ca. 109 CFU/mL) eradicated such Gram-positive organisms as S. aureus (MRSA, MSSA), E. faecalis (VRE), S. pyogenes and S. mutans when irradiated with white light for 2 min. At the concentration of 5 μM and in the presence of polymyxin E at non-bactericidal 1.25 μg/mL concentration, 1 also showed a 7-log to 9-log reductions in bacterial counts of such Gram-negative organisms as multi-drug resistant (MDR) A. baumannii, MDR P. aeruginosa, E. coli and Klebsiella pneumoniae (CRE: KPC and NDM-1), also when irradiated with white light for 2 min. The structure-activity relationship studies revealed that unsubstituted at benzene rings 2,3-distyrylindole 2 was most potent and gave a 5-order of magnitude eradication of a MRSA strain at the concentration of 30 nM upon irradiation with white light. Initial mechanistic experiments revealed the disruption of bacterial cell membrane, but indicated that singlet oxygen production, which is commonly associated with photodynamic therapy, may not play a role in the bactericidal effects of the 2,3-distyrylindoles.

In Situ Disinfection through Photoinspired Radical Oxygen Species Storage and Thermal-Triggered Release from Black Phosphorous with Strengthened Chemical Stability

Photodynamic therapy (PDT) utilizing light-induced reactive oxygen species (ROS) is a promising alternative to combat antibiotic-resistant bacteria and biofilm. However, the photosensitizer (PS)-modified surface only exhibits antibacterial properties in the presence of light. It is known that extended photoirradiation may lead to phototoxicity and tissue hypoxia, which greatly limits PDT efficiency, while ambient pathogens also have the opportunity to attach to biorelevant surfaces in medical facilities without light. Here, an antimicrobial film composed of black phosphorus nanosheets (BPSs) and poly (4-pyridonemethylstyrene) endoperoxide (PPMS-EPO) to control the storage and release of ROS reversibly is introduced. BPS, as a biocompatible PS, can produce high singlet oxygen under the irradiation of visible light of 660 nm, which can be stably stored in PPMS-EPO. The ROS can be gradually thermally released in the dark. In vitro antibacterial studies demonstrate that the PPMS-EPO/BPS film exhibits a rapid disinfection ability with antibacterial rate of 99.3% against Escherichia coli and 99.2% against Staphylococcus aureus after 10 min of irradiation. Even without light, the corresponding antibacterial rate reaches 76.5% and 69.7%, respectively. In addition, incorporating PPMS significantly improves the chemical stability of the BPS.

Photodynamic antimicrobial chemotherapy (PACT) using toluidine blue inhibits both growth and biofilm formation by Candida krusei

Among non-albicans Candida species, the opportunistic pathogen Candida krusei emerges because of the high mortality related to infections produced by this yeast. The Candida krusei is an opportunistic pathogen presenting an intrinsic resistance to fluconazol. In spite of the reduced number of infections produced by C. krusei, its occurrence is increasing in some groups of patients submitted to the use of fluconazol for prophylaxis. Photodynamic antimicrobial chemotherapy (PACT) is a potential antimicrobial therapy that combines visible light and a nontoxic dye, known as a photosensitizer, producing reactive oxygen species (ROS) that can kill the treated cells. The objective of this study was to investigate the effects of PACT, using toluidine blue, as a photosensitizer on both growth and biofilm formation by Candida krusei. In this work, we studied the effect of the PACT, using TB on both cell growth and biofilm formation by C. krusei. PACT was performed using a light source with output power of 0.068 W and peak wavelength of 630 nm, resulting in a fluence of 20, 30, or 40 J/cm². In addition, ROS production was determined after PACT. The number of samples used in this study varied from 6 to 8. Statistical differences were evaluated by analysis of variance (ANOVA) and post hoc comparison with Tukey-Kramer test. PACT inhibited both growth and biofilm formation by C. krusei. It was also observed that PACT stimulated ROS production. Comparing to cells not irradiated, irradiation was able to increase ROS production in 11.43, 6.27, and 4.37 times, in the presence of TB 0.01, 0.02, and 0.05 mg/mL, respectively. These results suggest that the inhibition observed in the cell growth after PACT could be related to the ROS production, promoting cellular damage. Taken together, these results demonstrated the ability of PACT reducing both cell growth and biofilm formation by C. krusei.

Lethal Effect of Photodynamic Treatment on Persister Bacteria

Persister bacteria tolerate bactericidal antibiotics due to transient and reversible phenotypic changes. As these bacteria can limit the effectiveness of antibiotics to eradicate certain infections, their elimination is a relevant issue. Photodynamic therapy seems suitable for this purpose, but phenotypic tolerance to it has also been reported for Pseudomonas aeruginosa. To test whether any phenotypic feature could confer tolerance against both antibiotics and photoinactivation, survivors from exposures to light in the presence of methylene blue were treated with ofloxacin, an antibiotic effective on nongrowing bacteria. Susceptibility to ofloxacin was normal in these bacteria in spite of their increased ability to survive photodynamic inactivation, suggesting the absence of cross-tolerance. It thus seemed possible to use one of these treatments to eliminate bacteria which had phenotypic tolerance to the other. To test this strategy, persister bacteria emerging from ofloxacin treatments were submitted to the action of light and methylene blue while the antibiotic remained in the bacterial suspension. Persisters lost their clonogenic ability under these conditions and the effects of the treatments seemed to be synergistic. These observations suggest that photodynamic antimicrobial therapy could be used as a complement to antibiotic treatments to eliminate persister bacteria from localized infections.

Photoinactivation effect of eosin methylene blue and chlorophyllin sodium-copper against Staphylococcus aureus and Escherichia coli

The use of eosin methylene blue according to Giemsa as photosensitizer is presented for the first time in this paper. The present study evaluated the potential application of chlorophyllin sodium copper salt (CuChlNa) and eosin methylene blue according to Giemsa (EMB) as antimicrobial photosensitizers (aPS) for photodynamic inactivation (PDI) of Staphylococcus aureus (gram-positive) and Escherichia coli (gram-negative) bacteria. The experiments were performed using S. aureus stain ATCC 25923 and E. coli ATCC 25922 in which five aPS concentrations (0.0, 1.0, 2.5, 5.0, 10.0, and 20.0 μM for S. aureus and 0.0, 5.0, 10.0, 20.0, 40.0, and 50.0 μM for E. coli) were prepared and added in 2 mL of a saline solution containing the bacterial inoculum. After aPS incubation, the samples were divided into two groups, one kept in the dark and another submitted to the illumination. Then, the bacterial inactivation was determined 18 h after the incubation at 37 °C by counting the colony-forming units (CFU). The results revealed that both EMB and CuChlNa can be used as aPS for the photoinactivation of S. aureus, while only EMB was able to photoinactivate E. coli. Nevertheless, a more complex experimental setup was needed for photoinactivation of E. coli. The data showed that EMB and CuChlNa presented similar photoinactivation effects on S. aureus, in which bacterial growth was completely inhibited at photosensitizer (PS) concentrations over 5 μM, when samples were previously incubated for 30 min and irradiated by a light dose of 30 J cm^-2 as a result of an illumination of 1 h at 8.3 mW cm^-2 by using a red light at 625 nm with a 1 cm beam diameter and output power of 6.5 mW. In the case of E. coli, bacterial growth was completely inhibited only when combining a PS incubation period of 120 min with concentrations over 20 μM.

Antimicrobial photodynamic therapy on Streptococcus mutans is altered by glucose in the presence of methylene blue and red LED

BACKGROUND

Dental caries are a multifactorial disease that progressively produces tooth destruction as a result of bacterial colonization of enamel surface, especially Streptococcus mutans. The objective of this work was to investigate the role of glucose in antimicrobial photodynamic therapy (aPDT) on S. mutans.

METHODS

S. mutans ATCC 25175 were cultured on microaerophilia at 37°C for 48h, and we tested aPDT in the presence of 50mM glucose. Bacterial suspension was used to investigate aPDT with 100μM methylene blue (MB) under LED emitting radiation at ʎ=660nm and parameters as following (P=473 mW; I=166.8 mW/cm², and doses of 5, 10 and 20J/cm²). A seventy-two hours biofilm was grown on 96 flat buttoned well-plate and irradiation was performed from 10 to 80J/cm² at similar conditions.

RESULTS

There was no dark toxicity nor bacterial death regarding LED irradiation on suspension and on biofilm. Nevertheless, aPDT presented expressive bacterial inactivation following 1 and 2min of irradiation on cell suspension. On the other hand, there was no inactivation in the presence of glucose under the same conditions. Biofilm was completely inactivated by MB-mediated aPDT after 6min of irradiation. However, the presence of glucose delayed the complete inactivation of the biofilm.

CONCLUSION

The presence of glucose in the suspension drastically delayed the effect of aPDT on S. mutans and this effect is more pronounced in bacterial suspension than on biofilm.