Arabinoxylan and fructan in the malting and brewing process

Characterization of molar mass and conformation of relevant (non-)starch polysaccharides in cereal-based beverages

Arabinoxylans, β-glucans, and dextrins influence the brewing industry's filtration process and product quality. Despite their relevance, only a maximum concentration of β-glucans is recommended. Nevertheless, filtration problems are still present, indicating that although the chemical concentration is essential, other parameters should be investigated. Molar mass and conformation are important polymer physical characteristics often neglected in this industry. Therefore, this research proposes an approach to physically characterize enzymatically isolated beer polysaccharides by asymmetrical flow field-flow fractionation coupled to multi-angle light scattering and differential refractive index detector. Based on the obtained molar masses, root-mean-square radius (rrms from MALS), and hydrodynamic radius (rhyd), conformational properties such as apparent density (ρapp) and rrms/rhyd can be calculated based on their molar mass and size. Consequently, the ρapp and rrms/rhyd behavior hints at the different structures within each polysaccharide. The rrms/rhyd 1.2 and high ρapp values on low molar mass dextrins (1-2·105 g/mol) indicate branches, while aggregated structures at high molar masses on arabinoxylans and β-glucans (2·105 -6·106 g/mol) are due to an increase of ρapp and a rrms/rhyd (0.6-1). This methodology provides a new perspective to analyze starch and non-starch polysaccharides in cereal-based beverages since different physical characteristics could influence beer's filtration and sensory characteristics.

The occurrence and structural heterogeneity of arabinoxylan in commercial pilsner beers and their non-alcoholic counterparts

The impact of arabinoxylan (AX) on the brewing process and beer characteristics depends on its content and structure and is often overlooked in research and industry. This paper reports on the occurrence and structural heterogeneity of AX in a set of commercial pilsner beers and their non-alcoholic counterparts. Fractionation by graded ethanol precipitation allowed us to isolate AX-rich fractions from beer with a number-average degree of polymerisation of 4 to 308 and an average degree of substitution in the range of 0.43 to 0.88. Pilsner beers had a higher content of high-molecular-weight AX than their non-alcoholic counterparts. The structural heterogeneity among the various commercial beers differed. By comparing the chemical composition of the beers, differences in beer production methods and ingredient selection were deduced and used to tentatively explain the differences in AX content and structural heterogeneity.

FODMAP reduction strategies for nutritionally valuable baking products: current state and future challenges

Fermentable oligo-, di- and monosaccharides and polyols (FODMAP) comprise several previously unrelated carbohydrates, such as fructans, fructo-oligosaccharides, galacto-oligosaccharides, fructose (in excess of glucose), mannitol and sorbitol, and among others. For many patients with gastro-intestinal disorders, such as irritable bowel syndrome, the ingestion of FODMAP triggers symptoms and causes discomfort. Among the main contributors to the dietary FODMAP intake are baking products, in particular bread as a major global staple food. This is primarily due to the fructan content of the cereal flours, but also process induced accumulation of FODMAP is possible. To provide low-FODMAP baking products, researchers have investigated various approaches, such as bio-process reduction by yeast, lactic acid bacteria, germination of the raw material or the use of exogenous enzymes. In addition, the selection of appropriate ingredients, which are either naturally or after pretreatment suitable for low-FODMAP products, is discussed. The sensory and nutritional quality of low-FODMAP baking products is another issue, that is addressed, with particular focus on providing sufficient dietary fiber intake. Based on this information, the current state of low-FODMAP baking and future research necessities, to establish practical strategies for low-FODMAP products, are evaluated in this article.

Non-starch polysaccharides in beer and brewing: A review of their occurrence and significance

It has become apparent that beer (both alcoholic and nonalcoholic) contains appreciable amounts of non-starch polysaccharides, a broad subgroup of dietary fiber. It is worth noting that the occurrence of non-starch polysaccharides in alcoholic beer does not imply this should be consumed as a source of nutrition. But the popularity of nonalcoholic beer is growing, and the lessons learnt from non-starch polysaccharides in brewing can be largely translated to nonalcoholic beer. For context, we briefly review the origins of dietary fiber, its importance within the human diet and the significance of water-soluble dietary fiber in beverages. We review the relationship between non-starch polysaccharides and brewing, giving focus to the techniques used to quantify non-starch polysaccharides in beer, how they affect the physicochemical properties of beer and their influence on the brewing process. The content of non-starch polysaccharides in both regular and low/nonalcoholic beer ranges between 0.5 - 4.0 g/L and are predominantly composed of arabinoxylans and β-glucans. The process of malting, wort production and filtration significantly affect the soluble non-starch polysaccharide content in the final beer. Beer viscosity and turbidity are strongly associated with the content of non-starch polysaccharides.

Barley: a potential cereal for producing healthy and functional foods

Barley is the fourth largest cereal crop in the world. It is mainly used for feeding, beer production and food. Barley is receiving more attention from both agricultural and food scientists because of its special chemical composition and health benefits. In comparison with other cereal crops, including wheat, rice and maize, barley grains are rich in dietary fiber (such as β-glucan) and tocols, which are beneficial to human health. It is well proved that diets rich in those chemicals can provide protection against hypertension, cardiovascular disease, and diabetes. Barley has been widely recognized to be great potential as a healthy or functional food. In this review, we present the information about the studies on physical structure of barley grain and the distribution of main chemical components, nutrient and functional composition of barley grain and their health benefits, and the approaches of improving and utilizing the nutrient and functional chemicals in barley grain. With the development of processing technologies, functional components in barley grains, especially β-glucan, can be efficiently extracted and concentrated. Moreover, nutrient and functional components in barley grains can be efficiently improved by precise breeding and agronomic approaches. The review highlights the great potential of barley used as healthy and functional foods, and may be instructive for better utilization of barley in food processing.

FODMAP modulation as a dietary therapy for IBS: Scientific and market perspective

A diet low in fermentable oligosaccharides, disaccharides, monosaccharides, and polyols (FODMAPs) is a promising therapeutic approach to reduce gastrointestinal symptoms associated with irritable bowel syndrome (IBS). However, a shift toward a more sustainable, healthy diet with higher inclusion of whole-grain cereals (i.e., wheat, rye, barley) and pulses, naturally rich in FODMAPs, poses a severe challenge for susceptible individuals. Dietary restriction of fermentable carbohydrates (commonly called the "low FODMAP diet") has received significant consideration. Hence, the development of functional low FODMAP products is emerging in food science and the food industry. In this review, we evaluate the most promising yet neglected (bio)-technological strategies adopted for modulating the FODMAP contents in complex food systems and the extent of their uptake in the global food market. We extensively investigated the global low FODMAP market, contrasted with the status quo in food science and discussed the key principles and concomitant challenges of targeted FODMAP reduction strategies. Powerful tools are available which are based either on the use of ingredients where FODMAPs have been physically removed (e.g., by membrane filtration) or biotechnologically reduced during the food processing, mediated by added enzymes, microbial enzymes during a fermentation process, and seed endogenous enzymes. However, <10% of the small market of functional products with a low FODMAP claim (total ∼800 products) used any of the targeted FODMAP reduction techniques. The global market is currently dominated by gluten-free products, which are naturally low in FODMAPs and characterized by inferior sensory attributes.

Prebiotic Potential of Cereal Components

One type of functional food that has been receiving much attention is food rich in prebiotics. The old but still valid definition of prebiotics defines them as non-digestible food components that selectively stimulate the growth and/or activity of the beneficial bacteria in the colon and, as a result, improve the host health. Cereals, as one of the main components in the human diet, contain substantial levels of dietary fiber with probable prebiotic potential. In addition, dietary fiber, particularly soluble dietary fiber, has recently emerged as a promising natural highly functional food ingredient in food production. This review focuses on the prebiotic potential of cereal dietary fiber types and covers the achievements and developments regarding its isolation. First, the probiotic and prebiotic concepts will be discussed. Next, different components of dietary fiber and their effect on the host bacteria through in vitro and/or in vivo studies will be reviewed. In a last part, this paper also discusses means of boosting the prebiotic properties of cereal components and innovative strategies for the extraction of cereal dietary fiber. The review focuses on wheat as a leading cereal crop that is widely and intensely used throughout the world in food production.

Fundamental study on changes in the FODMAP profile of cereals, pseudo-cereals, and pulses during the malting process

Whole grains and pulses are rich in nutrients but often avoided by individuals with gastrointestinal disorders, due to high levels of fermentable oligo-, di-, monosaccharides and polyols (FODMAPs). This study investigated the impact of malting as delivery-system for endogenous enzymes. Malts from barley and wheat (naturally high in fructans), lentils and chickpeas (high in galactooligosaccharides), oat and buckwheat (low in FODMAPs) were produced. While barley and wheat malts had slightly elevated fructan-levels, in oat malt 0.8 g/100 g DM fructans were de novo synthesized. In lentils and chickpeas galactooligosaccharides diminished by 80-90%. Buckwheat did not contain any FODMAPs commonly investigated, but fagopyritols which may have a similar physiological effect. Also fagopyritols were degraded. While malted pulses and buckwheat are directly suitable for low FODMAP applications, using the combined approach of malting and fermentation, malted cereals could contribute to high nutritional values of such products.

Barley α-amylase/subtilisin inhibitor shows inhibitory activity against endogenous xylanase isozyme I of malted barley: A novel protein function

Mashing process had little influence on the arabinoxylan content in the finished wort. In this paper, a protein with inhibitory activity against the endogenous xylanase isozyme I (X-I) of malted barley was extracted and purified using a combination of ion-exchange and size-exclusion chromatography. The protein was identified as barley α-amylase/subtilisin inhibitor (BASI). According to the amino acid sequence analysis, BASI was completely different from the previous reported xylanase inhibitors. BASI showed dosage-dependent inhibitory activity. BASI exhibited a maximum inhibitory activity at 50°C and pH 6.0. BASI inhibited X-I as a competitive manner. PRACTICAL APPLICATIONS: A protein with inhibitory activity against the major endogenous xylanase isozyme I (X-I) of malted barley was extracted, purified, and characterized, which was identified as barley α-amylase/subtilisin inhibitor (BASI). The results help brewers to achieve a better understanding of the mechanism of arabinoxylan degradation during mashing. BASI can be used as an indicator to screen microbial xylanases. The microbial xylanases insensitive to BASI would have obvious advantages in the degradation of arabinoxylan polymers and filterability improvement during mashing.

Non-Starch Polysaccharides in Wheat Beers and Barley Malt beers: A Comparative Study

Non-starch polysaccharides (NSPs) in beers attract extensive attention due to their health benefits. The aim of this work was to investigate and compare NSPs including arabinoxylan, arabinogalactan, β–glucans, and mannose polymers in wheat and barley malt beers as well as the influence on its quality. NSPs in wheat beers (1953–2923 mg/L) were higher than that in barley malt beers (1442–1756 mg/L). Arabinoxylan was the most abundant followed by arabinogalactan. In contrast to barley malt beers, wheat beers contained more mannose polymers (130–182 mg/L) than β-glucan (26–99 mg/L), indicating that more arabinoxylan, arabinogalactan, and mannose polymers came from wheat malt. The substitution degree of arabinoxylan in wheat beers (0.57–0.66) was lower than that in barley malt beers (0.68–0.72), while the degree of polymerization (38–83) was higher (p < 0.05) than that in barley malt beers (38–48), indicating different structures of arabinoxylan derived from barley malt and wheat malt. NSPs, especially arabinoxylan content, positively correlated (p < 0.01) with real extract and viscosity of beers. Furthermore, wheat and barley malt beers were well separated in groups by principal component analysis.

Molecular Characterization of Arabinoxylan from Wheat Beer, Beer Foam and Defoamed Beer

This research was to explore the distribution and some molecular characterization of arabinoxylan in wheat beer (B), beer foam (BF) and defoamed beer (DB) because of the crucial influences of arabinoxylan on wheat beer and its foam. The purified arabinoxylan from B, BF, and DB were fractionated by ethanol of 50%, 67%, 75%, and 80%. The monosaccharide composition, substitution degree (Ara/Xyl ratio, A/X), and average degrees of polymerization (avDP) of arabinoxylan were investigated. Molecular weight and microstructure were also involved in this study by GPC-LLS and SEM, respectively. Under the same ethanol concentration, the arabinoxylan content in the BF was higher than the other two, respectively, and it was precipitated in BF fraction with 50% ethanol which accounted for 80.84% of the total polysaccharides. Meanwhile, the greatest substitution degree (A/X) and highest value of avDP of the arabinoxylan was found in all beer foam fractions regardless of the concentration of ethanol used. The average degrees of polymerization (avDP) of arabinoxylan displayed a significant difference (p < 0.05) among B, BF, and DB. Furthermore, arabinoxylan presented varied microstructure with irregular lamellas and spherical structures and the weight-average molecular weight (Mw) of arabinoxylan showed the lowest values in BF, while the largest values were shown in DB. Therefore, arabinoxylan was more accumulated in beer foam, especially in 50% ethanol, characterised by greater value of A/X and avDP, as well as lower Mw. It was suggested that the arabinoxylan played important roles in maintaining wheat beer foam characteristics.

Impact of Cereal Seed Sprouting on Its Nutritional and Technological Properties: A Critical Review

Sprouting induces activation and de novo synthesis of hydrolytic enzymes that make nutrients available for plant growth and development. Consumption of sprouted grains is suggested to be beneficial for human health. Positive consumer perceptions about sprouted cereals have resulted in new food and beverage product launches. However, because there is no generally accepted definition of "sprouting," it is unclear when grains are to be called sprouted. Moreover, guidelines about how much sprouted grain material food products should contain to exert health benefits are currently lacking. Accordingly, there is no regulatory base to develop appropriate food labeling for "sprouted foods." This review describes the nutritional and technological properties of sprouted grains in relation to processing conditions and provides guidelines to optimize sprouting practices in order to maximize nutritive value. Relatively long sprouting times (3 to 5 days) and/or high processing temperatures (25 to 35 °C) are needed to maximize the de novo synthesis and/or release of plant bioactive compounds. Nutrient compositional changes resulting from sprouting are often associated with health benefits. However, supportive data from clinical studies are very scarce, and at present it is impossible to draw any conclusion on health benefits of sprouted cereals. Finally, grains sprouted under the above-mentioned conditions are generally unfit for use in traditional food processing and it is challenging to use sprouted grains as ingredients without compromising their nutrient content. The present review provides a basis for better defining what "sprouting" is, and to help further research and development efforts in this field as well as future food regulations development.

A Grounded Guide to Gluten: How Modern Genotypes and Processing Impact Wheat Sensitivity

The role of wheat, and particularly of gluten protein, in our diet has recently been scrutinized. This article provides a summary of the main pathologies related to wheat in the human body, including celiac disease, wheat allergy, nonceliac wheat sensitivity, fructose malabsorption, and irritable bowel syndrome. Differences in reactivity are discussed for ancient, heritage, and modern wheats. Due to large variability among species and genotypes, it might be feasible to select wheat varieties with lower amounts and fewer types of reactive prolamins and fructans. Einkorn is promising for producing fewer immunotoxic effects in a number of celiac research studies. Additionally, the impact of wheat processing methods on wheat sensitivity is reviewed. Research indicates that germination and fermentation technologies can effectively alter certain immunoreactive components. For individuals with wheat sensitivity, less-reactive wheat products can slow down disease development and improve quality of life. While research has not proven causation in the increase in wheat sensitivity over the last decades, modern wheat processing may have increased exposure to immunoreactive compounds. More research is necessary to understand the influence of modern wheat cultivars on epidemiological change.

Purification and characterisation of arabinoxylan arabinofuranohydrolase I responsible for the filterability of barley malt

Dan'er is a widely grown malt barley cultivar in China, but its filterability defects have severely impeded its application in beer brewing. Previous investigations have suggested that we should identify the malt filterability correlated proteins, one of which was postulated to be arabinoxylan arabinofuranohydrolase I (AXAH-I). To verify this hypothesis, we purified AXAH-I from Dan'er malt, characterised its enzyme performance, and investigated its influence on filterability by adding different amounts of purified enzyme to the mash. With 6 mU g(-1) malt AXAH-I supplemented, the wort separation rate increased by 31.8%, viscosity decreased by 3.6%, and the endosperm reserve contents declined concomitantly. Unexpectedly, the wort turbidity increased with increasing AXAH-I. We also tried to optimise the use of currently available commercial enzyme products for filterability improvement in beer brewing, by supplementing them with purified AXAH-I and β-amylase. AXAH-I could be a functional component for novel commercial enzyme products in the beer industry.

A simple method for simultaneous quantification of total arabinoxylans and fructans in wheat flour

Current methods for measuring fructan and arabinoxylan concentrations in wheat flour are time-consuming, and each type of the polymers requires a separate method. Here, we report the development of a new method that allows simultaneous determination of arabinoxylan and fructan contents in wheat flour. The new method is based on a single hydrolysis procedure for both arabinoxylans and fructans and an optimized separation technique for all monomers released. Owing to the use of milder hydrolysis conditions that afforded higher recovery of pentoses, the level of arabinoxylans in wheat flour determined by this new method is slightly higher than that measured with the widely used hydrolysis protocol. On the basis of the finding that, for a given flour sample, the total fructose concentration after hydrolysis is highly correlated with its total fructan concentration, the fructan content of a wheat flour sample can thus be estimated directly by the total fructose content. By simplifying and combining the two separate methods used for arabonoxylan and fructan analysis, this new method enables the quantification of arabinoxylans and fructans in wheat flour using a single acid hydrolysis step and a single high-performance liquid chromatography run.