Leucocyte and Platelet-rich Fibrin: a carrier of autologous multipotent cells for regenerative medicine

Development of a super-hydrophilic anaerobic tube for the optimization of platelet-rich fibrin

Horizontal platelet-rich fibrin (H-PRF) contains a variety of bioactive growth factors and cytokines that play a key role in the process of tissue healing and regeneration. The blood collection tubes used to produce Solid-PRF (plasmatrix (PM) tubes) have previously been shown to have a great impact on the morphology, strength and composition of the final H-PRF clot. Therefore, modification to PM tubes is an important step toward the future optimization of PRF. To this end, we innovatively modified the inner wall surface of the PM tubes with plasma and adjusted the gas environment inside the PM tubes to prepare super-hydrophilic anaerobic plasmatrix tubes (SHAP tubes). It was made anaerobic for the preparation of H-PRF with the aim of improving mechanical strength and bioactivity. The findings demonstrated that an anaerobic environment stimulated platelet activation within the PRF tubes. After compression, the prepared H-PRF membrane formed a fibrous cross-linked network with high fracture strength, ideal degradation characteristics, in addition to a significant increase in size. Thereafter, the H-PRF membranes prepared by the SHAP tubes significantly promoted collagen synthesis of gingival fibroblast and the mineralization of osteoblasts while maintaining excellent biocompatibility, and advantageous antibacterial properties. In conclusion, the newly modified PRF tubes had better platelet activation properties leading to better mechanical strength, a longer degradation period, and better regenerative properties in oral cell types including gingival fibroblast and alveolar osteoblasts. It also improves the success rate of H-PRF preparation in patients with coagulation dysfunction and expands the clinical application scenario.

How to explain the beneficial effects of leukocyte- and platelet-rich fibrin

The survival of an organism relies on its ability to repair the damage caused by trauma, toxic agents, and inflammation. This process involving cell proliferation and differentiation is driven by several growth factors and is critically dependent on the organization of the extracellular matrix. Since autologous platelet concentrates (APCs) are fibrin matrices in which cells, growth factors, and cytokines are trapped and delivered over time, they are able to influence that response at different levels. The present review thoroughly describes the molecular components present in one of these APCs, leukocyte- and platelet-rich fibrin (L-PRF), and summarizes the level of evidence regarding the influence of L-PRF on anti-inflammatory reactions, analgesia, hemostasis, antimicrobial capacity, and its biological mechanisms on bone/soft tissue regeneration.

The use of mesenchymal stromal cell secretome to enhance guided bone regeneration in comparison with leukocyte and platelet-rich fibrin

OBJECTIVES

Secretomes of mesenchymal stromal cells (MSC) represent a novel strategy for growth-factor delivery for tissue regeneration. The objective of this study was to compare the efficacy of adjunctive use of conditioned media of bone-marrow MSC (MSC-CM) with collagen barrier membranes vs. adjunctive use of conditioned media of leukocyte- and platelet-rich fibrin (PRF-CM), a current growth-factor therapy, for guided bone regeneration (GBR).

METHODS

MSC-CM and PRF-CM prepared from healthy human donors were subjected to proteomic analysis using mass spectrometry and multiplex immunoassay. Collagen membranes functionalized with MSC-CM or PRF-CM were applied on critical-size rat calvaria defects and new bone formation was assessed via three-dimensional (3D) micro-CT analysis of total defect volume (2 and 4 weeks) and 2D histomorphometric analysis of central defect regions (4 weeks).

RESULTS

While both MSC-CM and PRF-CM revealed several bone-related proteins, differentially expressed proteins, especially extracellular matrix components, were increased in MSC-CM. In rat calvaria defects, micro-CT revealed greater total bone coverage in the MSC-CM group after 2 and 4 weeks. Histologically, both groups showed a combination of regular new bone and 'hybrid' new bone, which was formed within the membrane compartment and characterized by incorporation of mineralized collagen fibers. Histomorphometry in central defect sections revealed greater hybrid bone area in the MSC-CM group, while the total new bone area was similar between groups.

CONCLUSION

Based on the in vitro and in vivo investigations herein, functionalization of membranes with MSC-CM represents a promising strategy to enhance GBR.

Hyperacute Serum and Knee Osteoarthritis

The knees are the most frequently affected weight-bearing joints in osteoarthritis (OA), impacting millions of people globally. With increasing life spans and obesity rates, the prevalence of knee OA will further mount, leading to a significant increase in the economic burden. The usual treatment modalities utilized to manage knee OA have shortcomings. Over the last decade, the field of regenerative medicine involving the use of biologics, such as autologous peripheral blood-derived orthobiologics, including hyperacute serum (HS), has evolved and shown potential for managing knee OA. In this manuscript, we qualitatively present the in vitro, pre-clinical, clinical, and ongoing studies investigating the applications of HS in the context of knee OA. Seven in vitro studies and one clinical study fit the scope of our manuscript. The results demonstrated that the administration of HS is potentially safe and efficacious in terms of increasing the viability of osteoarthritic chondrocytes, reducing pain and inflammation, and improving function in patients with knee OA. However, due to insufficient literature, pre-clinical studies to better understand the mechanism of action are required. In addition, adequately powered, multi-center, non-randomized, and randomized controlled trials with longer follow-up are warranted to establish the safety and efficacy of HS for the management of knee OA and to justify its clinical use.

Progress in Regenerative Medicine: Exploring Autologous Platelet Concentrates and Their Clinical Applications

The goal of regenerative medicine is to achieve tissue regeneration. In the past, commonly used techniques included autologous or allogeneic transplantation and stem cell therapy, which have limitations, such as a lack of donor sites in the case of autologous transplantation and the invasiveness of stem cell harvesting. In recent years, research has, therefore, focused on new and less invasive strategies to achieve tissue regeneration. A step forward in this direction has been made with the development of autologous platelet concentrates (APCs), which are derived from the patient's own blood. They can be classified into three generations: platelet-rich plasma (PRP), platelet-rich fibrin (PRF), and concentrated growth factors (CGFs). These APCs have different structural characteristics, depending on the distinctive preparation method, and contain platelets, leukocytes, and multiple growth factors, including those most involved in regenerative processes. The purpose of this review is to clarify the most used techniques in the field of regenerative medicine in recent years, comparing the different types of APCs and analyzing the preparation protocols, the composition of the growth factors, the level of characterization achieved, and their clinical applications to date.

Proteomic Analysis of Mesenchymal Stromal Cells Secretome in Comparison to Leukocyte- and Platelet-Rich Fibrin

Secretomes of mesenchymal stromal cells (MSCs) are emerging as a novel growth factor (GF)-based strategy for periodontal and bone regeneration. The objective of this study was to compare the secretome of human bone marrow MSC (BMSC) to that of leukocyte- and platelet-rich fibrin (L-PRF), an established GF-based therapy, in the context of wound healing and regeneration. Conditioned media from human BMSCs (BMSC-CM) and L-PRF (LPRF-CM) were subjected to quantitative proteomic analysis using liquid chromatography with tandem mass spectrometry. Global profiles, gene ontology (GO) categories, differentially expressed proteins (DEPs), and gene set enrichment (GSEA) were identified using bioinformatic methods. Concentrations of selected proteins were determined using a multiplex immunoassay. Among the proteins identified in BMSC-CM (2157 proteins) and LPRF-CM (1420 proteins), 1283 proteins were common. GO analysis revealed similarities between the groups in terms of biological processes (cellular organization, protein metabolism) and molecular functions (cellular/protein-binding). Notably, more DEPs were identified in BMSC-CM (n = 550) compared to LPRF-CM (n = 118); these included several key GF, cytokines, and extracellular matrix (ECM) proteins involved in wound healing. GSEA revealed enrichment of ECM (especially bone ECM)-related processes in BMSC-CM and immune-related processes in LPRF-CM. Similar trends for intergroup differences in protein detection were observed in the multiplex analysis. Thus, the secretome of BMSC is enriched for proteins/processes relevant for periodontal and bone regeneration. The in vivo efficacy of this therapy should be evaluated in future studies.

Use of CGF in Oral and Implant Surgery: From Laboratory Evidence to Clinical Evaluation

Edentulism is the condition of having lost natural teeth, and has serious social, psychological, and emotional consequences. The need for implant services in edentulous patients has dramatically increased during the last decades. In this study, the effects of concentrated growth factor (CGF), an autologous blood-derived biomaterial, in improving the process of osseointegration of dental implants have been evaluated. Here, permeation of dental implants with CGF has been obtained by using a Round up device. These CGF-coated dental implants retained a complex internal structure capable of releasing growth factors (VEGF, TGF-β1, and BMP-2) and matrix metalloproteinases (MMP-2 and MMP-9) over time. The CGF-permeated implants induced the osteogenic differentiation of human bone marrow stem cells (hBMSC) as confirmed by matrix mineralization and the expression of osteogenic differentiation markers. Moreover, CGF provided dental implants with a biocompatible and biologically active surface that significantly improved adhesion of endothelial cells on CGF-coated implants compared to control implants (without CGF). Finally, data obtained from surgical interventions with CGF-permeated dental implants presented better results in terms of optimal osseointegration and reduced post-surgical complications. These data, taken together, highlight new and interesting perspectives in the use of CGF in the dental implantology field to improve osseointegration and promote the healing process.

Platelet Rich Fibrin Membrane Grafting After Laser Excision for Oral Mucosal Lesions

Platelet rich fibrin (PRF) is a novel surgical biomaterial which has shown immense healing and regenerative potential with diverse clinical applications. Surgical excision is a routinely employed treatment modality for mucosal oral lesions with or without grafting or repair of the base of the wound. We proposed a hypothesis that covering of the base of excised lesion with this platelet rich fibrin membrane can accelerate the rate of physiological healing process and regeneration. To evaluate the role, efficacy, advantages and adverse effects if any, of placement of PRF membrane grafts over surgical excision sites of oral mucosal lesions. Platelet rich fibrin membrane graft was prepared as per recommendation and established protocols. Patients were selected for surgical excision of localized, superficial oral mucosal lesions after meticulous clinical and radiological considerations and informed consent was taken. After laser excision with safe margins, the base of wound was covered with PRF membrane graft, stitched in place by 3-0 vicryl sutures. The operated site was clinically evaluated at regular intervals and a healing score was calculated and statistically tabulated on the basis of various parameters of healing. A total of 34 patients were included in the study with a male preponderance (21 males and 13 females). Satisfactory and clinically acceptable wound healing was observed in most of the patient with minimal morbidities. Surgical site demonstrated good healing score and clinically complete healing with good epithelialisation was achieved in all patients. Platelet rich fibrin membrane is an effective grafting biomaterial after excision of oral mucosal lesions as it enhances the rate of healing with minimal complications. We recommend further multicentre studies with higher sample size to explore its utility and clinical applications in different avenues of oral and head neck surgery.

Quantitative assessment of platelet rich fibrin for the repair of extraction socket in a rat model

The present study evaluated the quantitative effects of platelet-rich fibrin (PRF) for the repair of extraction socket in Sprague Dawley (SD) rat model by assessing several key clinical parameters. Seventy two male SD rats were subjected to surgical extraction of the maxillary right incisor. Rats were randomly divided into four groups with eighteen rats in each group based on the treatment received: extraction socket without treatment of PRF was taken as control (group I). Extraction socket implanted with 0.1, 0.2, and 0.4 mL of PRF was taken as study groups (groups II, III, and IV). The obtained results demonstrated that, low dose of PRF efficiently enhanced the natural healing cascade. Whereas, high dose interfered with native tissue contribution and altered the natural healing process. The beneficial effects of quantity-based application of PRF may raise the possibility of a new approach as complementary therapy besides conventional treatment.

Gradual Drug Release Membranes and Films Used for the Treatment of Periodontal Disease

Periodontitis is an inflammatory disease that, if not treated, can cause a lot of harm to the oral cavity, to the patients' quality of life, and to the entire community. There is no predictable standardized treatment for periodontitis, but there have been many attempts, using antibiotics, tissue regeneration techniques, dental scaling, or root planning. Due to the limits of the above-mentioned treatment, the future seems to be local drug delivery systems, which could gradually release antibiotics and tissue regeneration inducers at the same time. Local gradual release of antibiotics proved to be more efficient than systemic administration. In this review, we have made a literature search to identify the articles related to this topic and to find out which carriers have been tested for drug release as an adjuvant in the treatment of periodontitis. Considering the inclusion and exclusion criteria, 12 articles were chosen to be part of this review. The selected articles indicated that the drug-releasing carriers in periodontitis treatment were membranes and films fabricated from different types of materials and through various methods. Some of the drugs released by the films and membranes in the selected articles include doxycycline, tetracycline, metronidazole, levofloxacin, and minocycline, all used with good outcome regarding their bactericide effect; BMP-2, Zinc-hydroxyapatite nanoparticles with regenerative effect. The conclusion derived from the selected studies was that gradual drug release in the periodontal pockets is a promising strategy as an adjuvant for the treatment of periodontal disease.

Biomaterials for Regenerative Medicine in Italy: Brief State of the Art of the Principal Research Centers

Regenerative medicine is the branch of medicine that effectively uses stem cell therapy and tissue engineering strategies to guide the healing or replacement of damaged tissues or organs. A crucial element is undoubtedly the biomaterial that guides biological events to restore tissue continuity. The polymers, natural or synthetic, find wide application thanks to their great adaptability. In fact, they can be used as principal components, coatings or vehicles to functionalize several biomaterials. There are many leading centers for the research and development of biomaterials in Italy. The aim of this review is to provide an overview of the current state of the art on polymer research for regenerative medicine purposes. The last five years of scientific production of the main Italian research centers has been screened to analyze the current advancement in tissue engineering in order to highlight inputs for the development of novel biomaterials and strategies.

Postoperatif peritoneal adhezyonların önlenmesinde saf zeytinyağı ve PRF’nin etkinliği

Purpose: In this study, we applied platelet rich fibrin (PRF) and pure olive oil on the incision surfaces of rats. We aimed to examine whether PRF may be used safely to prevent peritoneal adhesions. Materials and Methods: Fourty rats were divided into 4 groups (n=8). Eight rats, not included in the study groups, were used to obtain PRF material. Group 1 had no surgical procedure, Group 2 was operated without medication, Group 3 was operated and received 1cc olive oil, Group 4 was operated and received 1 cc PRF. After 21 days, cecum areas were examined histopathologically. Tumor necrosis factor-α (TNF-α), interleukin-6 (IL-6), intercellular adhesion molecule-1 (ICAM-1) and platelet-derived growth factor (PDGF) levels were measured in serum by ELISA. Results: The adhesion scores and severity of fibrosis in Group 3 and 4 were significantly lower than Group 2. Plasma TNF-α value was significantly higher in Group 2 than Group 4. Plasma PDGF value was significantly higher in Group 2 than Group 3 and 4. Discussion: PRF reduced intestinal adhesion by inhibiting the proliferation of fibroblasts and inflammatory cells, and promoting the proliferation of mesothelial cells. PRF has anti-inflammatory effect and prevented postop adhesions, based mainly on growth factors and cytokines in its content.

The effect of resting and compression time post-centrifugation on the characteristics of platelet rich fibrin (PRF) membranes

OBJECTIVE

To evaluate the effect of resting and compression time after centrifugation on the physical properties of platelet rich fibrin (PRF) membranes, and to provide optimal guidance regarding the clinical preparation of PRF.

MATERIALS AND METHODS

A total of 12 volunteers enrolled in this study divided into 2 groups equally. For each volunteer, 6 tubes of 10 mL venous whole blood was drawn. To evaluate the influence of resting time after centrifugation, PRF clots were taken out 0, 1, 3, 5, 7, and 10 min from tubes following centrifugation, and then the weight, size, maximum stress, and maximum strain of each group were measured. To evaluate the influence of compression time on the preparation of PRF membranes, the weight ratio of PRF membranes to PRF clots was calculated by compression for 10 s, 30 s, 60 s, 90 s, 120 s, and 180 s, respectively. Scanning electron microscopy was performed to observe the cross-linking of the fibers within membranes, and the maximum stress and strain of PRF membranes were tested followed by stress-strain curve analysis.

RESULTS

The weight and volume of PRF clots and PRF membranes increased in size and weight reached the top at 3 min, followed by a decrease after 7-min resting. The maximum strain of the PRF membranes after 10 min decreased significantly compared to the 3-min and 5-min groups. The maximum stress was found at 3 min followed by a statistical decrease when resting time went on. Scanning electron microscopy demonstrated that the internal fibrous structure of the PRF membranes was looser when the compression time was less than 60 s when comparing the 90-s group. The maximum stress of PRF membranes was shown using a wait period of 3 min post-centrifugation followed by compression for 120 s.

CONCLUSION

The findings from the present study demonstrate that the time post-centrifugation of PRF membranes showed a maximum weight, volume, and mechanical properties after resting for 3-5 min in the tube post-centrifugation followed by a compression time of 120 s.

CLINICAL RELEVANCE

Although research to date has focused primarily on centrifugation protocols, this study revealed for the first time that the resting time post-centrifugation greatly affected the mechanical properties of PRF. This study demonstrated that the resting and compression time after centrifugation influences the mechanical strength of PRF membranes, which might explain differences in PRF characteristics prepared by different clinicians that may provide a standard guide for preparation of PRF membranes.

Meniscus regeneration by 3D printing technologies: Current advances and future perspectives

Meniscal tears are a frequent orthopedic injury commonly managed by conservative strategies to avoid osteoarthritis development descending from altered biomechanics. Among cutting-edge approaches in tissue engineering, 3D printing technologies are extremely promising guaranteeing for complex biomimetic architectures mimicking native tissues. Considering the anisotropic characteristics of the menisci, and the ability of printing over structural control, it descends the intriguing potential of such vanguard techniques to meet individual joints’ requirements within personalized medicine. This literature review provides a state-of-the-art on 3D printing for meniscus reconstruction. Experiences in printing materials/technologies, scaffold types, augmentation strategies, cellular conditioning have been compared/discussed; outcomes of pre-clinical studies allowed for further considerations. To date, translation to clinic of 3D printed meniscal devices is still a challenge: meniscus reconstruction is once again clear expression of how the integration of different expertise (e.g., anatomy, engineering, biomaterials science, cell biology, and medicine) is required to successfully address native tissues complexities.

Structure, Barrier Function, and Bioactivity of Platelet-Rich Fibrin Following Thermal Processing

Platelet-rich fibrin (PRF) has been utilized as a substitute for resorbable membranes during guided bone regeneration therapy as it is a more bioactive biomaterial with living cells and growth factors than resorbable membranes. Nevertheless, PRF poses obvious disadvantages in its mechanical strength since its rapid degradability has been shown to typically resorb within a 2-week time period. In the present study, the barrier function and biological and mechanical properties of PRF were investigated both as standard therapy and after thermal processing. Two heating processes were applied: both single-side heating and double-side heating at 90°C for 10 s using a metal plate heater. The appearance and weight of PRF membranes were documented after heating, along with their morphological and mechanical properties evaluated by scanning electron microscope and tensile strength tests. The viability of cells found within PRF membranes was also evaluated using live/dead cell viability and CCK-8 (cell counting kit-8) assays. To comprehensively evaluate the barrier function of PRF membranes, Hoechst staining of human gingival fibroblasts, which can be distinguished from cells within the PRF membrane by emitting blue light at an excitation wavelength of 488 nm, was seeded onto the surface of PRF membranes. Furthermore, osteoblasts were cultured with extracts from different PRF groups to evaluate the biocompatibility of PRF membranes. The degradation rate of PRF membranes was examined by digestion assay. Compared with the nonheated PRF control, the size and weight of PRF membranes led to a significant decrease with a denser PRF microstructure following heating. In summary, the double-sided heating of PRF membranes not only demonstrated an improvement in mechanical and degradation properties but also led to a decrease in cell viability and proliferation.

Analysis of CGF Biomolecules, Structure and Cell Population: Characterization of the Stemness Features of CGF Cells and Osteogenic Potential

Concentrated Growth Factors (CGF) represent new autologous (blood-derived biomaterial), attracting growing interest in the field of regenerative medicine. In this study, the chemical, structural, and biological characterization of CGF was carried out. CGF molecular characterization was performed by GC/MS to quantify small metabolites and by ELISA to measure growth factors and matrix metalloproteinases (MMPs) release; structural CGF characterization was carried out by SEM analysis and immunohistochemistry; CGF has been cultured, and its primary cells were isolated for the identification of their surface markers by flow cytometry, Western blot, and real-time PCR; finally, the osteogenic differentiation of CGF primary cells was evaluated through matrix mineralization by alizarin red staining and through mRNA quantification of osteogenic differentiation markers by real-time PCR. We found that CGF has a complex inner structure capable of influencing the release of growth factors, metabolites, and cells. These cells, which could regulate the production and release of the CGF growth factors, show stem features and are able to differentiate into osteoblasts producing a mineralized matrix. These data, taken together, highlight interesting new perspectives for the use of CGF in regenerative medicine.

Regenerative Potential of Platelet-Rich Fibrin Releasate Combined with Adipose Tissue-Derived Stem Cells in a Rat Sciatic Nerve Injury Model

Sciatic nerve injuries, not uncommon in trauma with a limited degree of functional recovery, are considered a persistent clinical, social, and economic problem worldwide. Accumulating evidence suggests that stem cells can promote the tissue regeneration through various mechanisms. The aim of the present study was to investigate the role of adipose tissue–derived stem cells (ADSCs) and combine with platelet-rich fibrin releasate (PRFr) in the regeneration of sciatic nerve injury in rats. Twenty-four Sprague-Dawley rats were randomly assigned to four groups, a blade was used to transect the left hindlimb sciatic nerve, and silicon tubes containing one of the following (by injection) were used to bridge the nerve proximal and distal ends (10-mm gap): group 1: untreated controls; group 2: PRFr alone; group 3: ADSCs alone; group 4: PRFr + ADSCs-treated. Walking function was assessed in horizontal rung ladder apparatus to compare the demands of the tasks and test sensitivity at 1-mo interval for a total of 3 mo. The gross inspection and histological examination was performed at 3 mo post transplantation. Overall, PRFr + ADSCs-treated performed better compared with PRFr or ADSCs injections alone. Significant group differences of neurological function were observed in ladder rung walking tests in all treated groups compared to that of untreated controls (P < 0.05). This injection approach may provide a successfully employed technique to target sciatic nerve defects in vivo, and the combined strategy of ADSCs with PRFr appears to have a superior effect on nerve repair.

Applications of Biocompatible Scaffold Materials in Stem Cell-Based Cartilage Tissue Engineering

Cartilage, especially articular cartilage, is a unique connective tissue consisting of chondrocytes and cartilage matrix that covers the surface of joints. It plays a critical role in maintaining joint durability and mobility by providing nearly frictionless articulation for mechanical load transmission between joints. Damage to the articular cartilage frequently results from sport-related injuries, systemic diseases, degeneration, trauma, or tumors. Failure to treat impaired cartilage may lead to osteoarthritis, affecting more than 25% of the adult population globally. Articular cartilage has a very low intrinsic self-repair capacity due to the limited proliferative ability of adult chondrocytes, lack of vascularization and innervation, slow matrix turnover, and low supply of progenitor cells. Furthermore, articular chondrocytes are encapsulated in low-nutrient, low-oxygen environment. While cartilage restoration techniques such as osteochondral transplantation, autologous chondrocyte implantation (ACI), and microfracture have been used to repair certain cartilage defects, the clinical outcomes are often mixed and undesirable. Cartilage tissue engineering (CTE) may hold promise to facilitate cartilage repair. Ideally, the prerequisites for successful CTE should include the use of effective chondrogenic factors, an ample supply of chondrogenic progenitors, and the employment of cell-friendly, biocompatible scaffold materials. Significant progress has been made on the above three fronts in past decade, which has been further facilitated by the advent of 3D bio-printing. In this review, we briefly discuss potential sources of chondrogenic progenitors. We then primarily focus on currently available chondrocyte-friendly scaffold materials, along with 3D bioprinting techniques, for their potential roles in effective CTE. It is hoped that this review will serve as a primer to bring cartilage biologists, synthetic chemists, biomechanical engineers, and 3D-bioprinting technologists together to expedite CTE process for eventual clinical applications.

Growth and Differentiation of Circulating Stem Cells After Extensive Ex Vivo Expansion

Background:

Stem cell therapy is gaining momentum as an effective treatment strategy for degenerative diseases. Adult stem cells isolated from various sources (i.e., cord blood, bone marrow, adipose tissue) are being considered as a realistic option due to their well-documented therapeutic potentials. Our previous studies standardized a method to isolate circulating multipotent cells (CMCs) that are able to sustain long term in vitro culture and differentiate towards mesodermal lineages.

Methods:

In this work, long-term cultures of CMCs were stimulated to study in vitro neuronal and myogenic differentiation. After induction, cells were analysed at different time points. Morphological studies were performed by scanning electron microscopy and specific neuronal and myogenic marker expression were evaluated using RT-PCR, flow cytometry and western blot. For myogenic plasticity study, CMCs were transplanted into in vivo model of chemically-induced muscle damage.

Results:

After neurogenic induction, CMCs showed characteristic dendrite-like morphology and expressed specific neuronal markers both at mRNA and protein level. The calcium flux activity of CMCs under stimulation with potassium chloride and the secretion of noradrenalin confirmed their ability to acquire a functional phenotype. In parallel, the myogenic potential of CMCs was confirmed by their ability to form syncytium-like structures in vitro and express myogenic markers both at early and late phases of differentiation. Interestingly, in a rat model of bupivacaine-induced muscle damage, CMCs integrated within the host tissue taking part in tissue repair.

Conclusion:

Overall, collected data demonstrated long-term cultured CMCs retain proliferative and differentiative potentials suggesting to be a good candidate for cell therapy.

Architectural and Ultrastructural Variations of Human Leukocyte-Rich Platelet-Rich Fibrin and Injectable Platelet-Rich Fibrin

Background:

Platelet-rich fibrin (PRF) architecture and ultrastructure plays a crucial role in regulating and coordinating the cellular functions and provides a physical architecture, mechanical stability, and biochemical cues necessary for tissue morphogenesis and homeostasis. No study consciously reported the variation in architecture, ultrastructure, and morphology of leukocyte-rich PRF (L-PRF) and injectable PRF (i-PRF).

Objective:

Hence, the present study was aimed to evaluate the fibrin architecture, ultrastructure, and cell contents of autologous L-PRF and i-PRF.

Materials and Methods:

The autologous L-PRF and i-PRF were prepared from blood samples of healthy donors. The morphological and structural variations were assessed by histopathology, atomic force microscopy, confocal laser scanning microscope, and field emission scanning electron microscope.

Results:

Disparity was found on architecture and ultrastructure of L-PRF and i-PRF fibrin network. The variation in platelet and leukocyte concentration attributed to the fibrin conformational changes. L-PRF shows thick fibrins with rough surface, whereas in i-PRF, smooth thin fibrins.

Conclusions:

The current study revealed that there is heterogeneity between L-PRF and i-PRF fibrin matrix architecture, ultrastructure, platelets, leukocytes, and the fibrin content. These speculate that the diameter, width, roughness, and smoothness of fibrin fibers, pore size, and shapes of L-PRF and i-PRF matrix may initiate and mediate the scaffold functions differently.

The distribution pattern and growth factor level in platelet-rich fibrin incorporated skin-derived mesenchymal stem cells: An in vitro study

Background and Aim:

A skin wound in an animal must be cared for to prevent further health issues. Platelet-rich fibrin (PRF) and skin-derived mesenchymal stem cells (SMSCs) have been reported to have potential in increasing the rate of wound healing. This study aimed to analyze the distribution patterns and levels of platelet-derived growth factor (PDGF), insulin-like growth factor (IGF), vascular endothelial growth factor (VEGF), and transforming growth factor-β (TGF-β) in PRF incorporated with SMSCs.

Materials and Methods:

This study employed a true experiment (in vitro) design with post-test only performed in the control group alone. PRF and SMSCs were extracted from the blood and skin of 16 rabbits. SMSCs were characterized using immunocytochemistry to examine clusters of differentiation for 45, 73, 90, and 105. PRF was incorporated into the SMSCs and then divided into four groups (N=32/n=8): Group A (PRF only), Group B (PRF+SMSCs, incubated for 1 day), Group C (PRF+SMSCs, incubated for 3 days), and Group D (PRF+SMSCs, incubated for 5 days). Scanning electron microscopy was used to examine the distribution pattern of SMSCs between groups. The supernatant serum (Group A) and supernatant medium culture (Group D) were collected for the measurement of PDGF, IGF, VEGF, and TGF-β using an enzyme-linked immunosorbent assay sandwich kit. An unpaired t-test was conducted to analyze the differences between Groups A and D (p<0.01).

Results:

Group D had the most morphologically visible SMSCs attached to the PRF, with elongated and pseudopodia cells. There was a significant difference between the levels of growth factor in Groups A and D (p=0.0001; p<0.01).

Conclusion:

SMSCs were able to adhere to and distribute evenly on the surface of PRF after 5 days of incubation. The PRF incorporated SMSCs contained high levels of PDGF, IGF, VEGF, and TGF- β, which may prove to have potential in enhancing wound healing.

Inflammatory cell profile using different autologous fibrin protocols

Autologous fibrin has been widely used in surgical procedures for both soft and hard tissue repair. There are different protocols and devices to obtain this matrix, with varying centrifugal time, gravity force, speed, angle of the sample tube and spinning radius. The aim of this study was to compare three methods of obtaining autologous fibrin: L-PRF using the Intra-Spin L-PRF centrifuge (Dohan protocol), the advanced PRF (A-PRF) using the Intra-Spin L-PRF centrifuge and autologous leukocyte fibrin (ALF), using the Kasvi centrifuge. Venous blood was collected from 7 healthy volunteers, which were submitted to the 3 different methods of centrifugation. The membranes were tissue-processed and evaluated by immunohistochemistry for CD3, CD20, CD68 and CD138. For CD68+, a lower number of cells was immunolabelled in the L-PRF group when compared to the other groups (A-PRF and ALF). For CD3+, a lower number of immunolabellated cells was observed in the ALF group when compared to the remaining groups (p < 0.05). In the A-PRF group, the CD20+ cell count was lower than in the remaining groups. No difference was observed in CD138+ cell counts between the groups. The 3 protocols tested are suitable for obtaining autologous fibrin membranes.

A Comprehensive Review of Concentrated Growth Factors and Their Novel Applications in Facial Reconstructive and Regenerative Medicine

BACKGROUND

Concentrated growth factors (CGFs) are the latest generation of platelet concentrates. The objective of developing CGF is to increase therapeutic efficacy. However, few studies have supported the superiority of CGF in composition and efficacy. The reconstruction and regeneration process is complicated and long term, whereas bioactivity of CGF is not durable. The purpose of this review is threefold. The first is to recommend more comparative studies between CGF and other platelet concentrates. The second is to constitute a continuous drug delivery system by combining CGF with other biomaterials. Finally, the novel use of CGF in facial regenerative and reconstructive medicine will be highlighted.

METHODS

A comprehensive review of literature regarding the use of CGF in facial regenerative and reconstructive medicine was performed. Based on the inclusion and exclusion criteria, a total of 135 articles were included.

RESULTS

The use of CGF involving facial rejuvenation, cartilage grafting, facial bone defects, facial peripheral nerve injury and wounding is reviewed. The reconstructive and regenerative principles lie in firm fibrin scaffolds and continuous in situ delivery of multiple growth factors.

CONCLUSIONS

CGF represents an advance in personalized medicine concept. However, the current scientific evidences about the use of CGF are limited. More basic and clinical studies should be conducted to understand the characteristics and clinical application of CGF.

LEVEL OF EVIDENCE V

This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266.

Commitment of Autologous Human Multipotent Stem Cells on Biomimetic Poly-L-lactic Acid-Based Scaffolds Is Strongly Influenced by Structure and Concentration of Carbon Nanomaterial

Nanocomposite scaffolds combining carbon nanomaterials (CNMs) with a biocompatible matrix are able to favor the neuronal differentiation and growth of a number of cell types, because they mimic neural-tissue nanotopography and/or conductivity. We performed comparative analysis of biomimetic scaffolds with poly-L-lactic acid (PLLA) matrix and three different p-methoxyphenyl functionalized carbon nanofillers, namely, carbon nanotubes (CNTs), carbon nanohorns (CNHs), and reduced graphene oxide (RGO), dispersed at varying concentrations. qRT-PCR analysis of the modulation of neuronal markers in human circulating multipotent cells cultured on nanocomposite scaffolds showed high variability in their expression patterns depending on the scaffolds’ inhomogeneities. Local stimuli variation could result in a multi- to oligopotency shift and commitment towards multiple cell lineages, which was assessed by the qRT-PCR profiling of markers for neural, adipogenic, and myogenic cell lineages. Less conductive scaffolds, i.e., bare poly-L-lactic acid (PLLA)-, CNH-, and RGO-based nanocomposites, appeared to boost the expression of myogenic-lineage marker genes. Moreover, scaffolds are much more effective on early commitment than in subsequent differentiation. This work suggests that biomimetic PLLA carbon-nanomaterial (PLLA-CNM) scaffolds combined with multipotent autologous cells can represent a powerful tool in the regenerative medicine of multiple tissue types, opening the route to next analyses with specific and standardized scaffold features.

Effects of leukocyte-platelet-rich fibrin and advanced platelet-rich fibrin on the viability and migration of human gingival fibroblasts

Background:

Platelet products play a fundamental role in the process of healing. The new generation of platelet-rich fibrin (PRF), namely advanced PRF (A-PRF), has different biological and mechanical properties compared to those of leukocyte-PRF (L-PRF). This study aimed to compare the effects of L-PRF and A-PRF on the viability and migration of human gingival fibroblasts (HGFs).

Materials and Methods:

In this in vitro study, the effects of A-PRF and L-PRF on the viability and migration of HGFs after 24 and 48 h were evaluated using the methyl thiazolyl tetrazolium assay. The viability of the negative control culture medium was considered to be 100%. The mean optical density of the test groups was divided by that of the negative control group and reported as percentage. One-way ANOVA was applied to assess the effects of time and type of PRF on the viability and migration of HGFs. Pairwise comparisons were made using the Tukey's test.

Results:

At 24 h, cell viability in the L-PRF group was significantly higher than that in the A-PRF group (P < 0.05). However, no significant difference was noted between the two groups at 48 h. At 24 h, L-PRF caused significantly higher cell migration compared to the negative control group, whereas at 48 h, both A-PRF and L-PRF significantly increased cell migration compared to the control group.

Conclusion:

Within the limitations of this study, L-PRF and A-PRF had significant effects on the viability and migration of HGFs. Further studies on these platelet concentrates are warranted.

New Frontiers in Skin Rejuvenation, Including Stem Cells and Autologous Therapies

One of the greatest challenges in the progression of aesthetic medicine lies in providing treatments with long-term results that are also minimally invasive and safe. Keeping up with this demand are developments in autologous therapies such as adipose-derived stem cells, stromal vascular fraction, microfat, nanofat, and platelet therapies, which are being shown to deliver satisfactory results. Innovations in more traditional cosmetic therapies, such as botulinum toxin, fillers, and thread lifts, are even more at the forefront of the advancement in aesthetics. Combining autologous therapies with traditional noninvasive methods can ultimately provide patients with more effective rejuvenation options.

New bioresorbable wraps based on oxidized polyvinyl alcohol and leukocyte-fibrin-platelet membrane to support peripheral nerve neurorrhaphy: preclinical comparison versus NeuraWrap

Nerve wrapping improves neurorrhaphy outcomes in case of peripheral nerve injuries (PNIs). The aim of this preclinical study was to assess the efficacy of two novel biodegradable wraps made of a synthetic 1% oxidized polyvinyl alcohol (OxPVA) and a natural leukocyte-fibrin-platelet membrane (LFPm) versus the commercial product NeuraWrap. After rats sciatic nerve transection and neurorrhaphy, the wraps were implanted and compared for functional outcome, by sciatic function index assessment; structural characteristics, by histological/immunohistochemical analysis; ultrastructural features, by transmission electron microscopy. Moreover, a morphometric study was also performed and collagen distribution was observed by Second Harmonic Generation microscopy. After 12 weeks from implantation, all wraps assured nerve function recovery; no scar tissue/neuromas were visible at dissection. LFPm wraps were completely resorbed, while residues of OxPVA and NeuraWrap were observed. In all groups, biocompatibility was confirmed by the absence of significant inflammatory infiltrate. According to histological/immunohistochemical analysis and morphometric findings, OxPVA and LFPm wraps were both effective in preserving nerve integrity. These results assess that bioengineered OxPVA and LFPm wraps successfully guarantee favorable lesion recovery after PNI/neurorrhaphy and, in future, may be considered an interesting alternative to the commercial NeuraWrap.

From Platelet-Rich Plasma to Advanced Platelet-Rich Fibrin: Biological Achievements and Clinical Advances in Modern Surgery

In the past 20 years, the platelet concentrates have evolved from first-generation products, i.e., platelet-rich plasma (PRP) and plasma rich in growth factors to the second-generation products such as leukocyte-platelet-rich fibrin (L-PRF) and advanced platelet-rich fibrin (A-PRF). These autologous products with a higher leukocyte inclusion and flexible fibrin mesh act as a scaffold to increase cellular migration in the angiogenic, osteogenic, and antimicrobial potential of these biomaterials in tissue regeneration. In the second-generation platelet concentrates, the protocols are easier, cheaper, and faster with an entire physiological fibrin matrix, resulting in a tridimensional mesh, not as rigid as one of the first generations. This allows the slow release of molecules over a longer period of time and triggers the healing and regenerative process at the site of injury. The potential of A-PRF to mimic the physiology and immunology of wound healing is also due to the high concentration of growth factors released as follows: vascular endothelial growth factor, platelet-derived growth factor, transforming growth factor-β, and anti-inflammatory cytokines that stimulate tissue cicatrization, vessels formation, and bone cell proliferation and differentiation. Furthermore, the number of neutrophils and monocytes/macrophages is higher releasing important chemotactic molecules such as chemokine ligand-5 and eotaxin. Thus, L-PRF and A-PRF have been used, especially in implantology, periodontology, and maxillofacial surgery. Future clinical applications include tissue regeneration/grafts, ulcers/skin necrosis in the diabetic patient and others, plastic surgery, and even musculoskeletal lesions.

Platelet-Rich Fibrin Scaffolds for Cartilage and Tendon Regenerative Medicine: From Bench to Bedside

Nowadays, research in Tissue Engineering and Regenerative Medicine is focusing on the identification of instructive scaffolds to address the requirements of both clinicians and patients to achieve prompt and adequate healing in case of injury. Among biomaterials, hemocomponents, and in particular Platelet-rich Fibrin matrices, have aroused widespread interest, acting as delivery platforms for growth factors, cytokines and immune/stem-like cells for immunomodulation; their autologous origin and ready availability are also noteworthy aspects, as safety- and cost-related factors and practical aspects make it possible to shorten surgical interventions. In fact, several authors have focused on the use of Platelet-rich Fibrin in cartilage and tendon tissue engineering, reporting an increasing number of in vitro, pre-clinical and clinical studies. This narrative review attempts to compare the relevant advances in the field, with particular reference being made to the regenerative role of platelet-derived growth factors, as well as the main pre-clinical and clinical research on Platelet-rich Fibrin in chondrogenesis and tenogenesis, thereby providing a basis for critical revision of the topic.

The Composition of Hyperacute Serum and Platelet-Rich Plasma Is Markedly Different despite the Similar Production Method

Autologous blood derived products, such as platelet-rich plasma (PRP) and platelet-rich fibrin (PRF) are widely applied in regenerative therapies, in contrast to the drawbacks in their application, mainly deriving from the preparation methods used. Eliminating the disadvantages of both PRP and PRF, hyperacute serum (HAS) opens a new path in autologous serum therapy showing similar or even improved regenerative potential at the same time. Despite the frequent experimental and clinical use of PRP and HAS, their protein composition has not been examined thoroughly yet. Thus, we investigated and compared the composition of HAS, serum, PRP and plasma products using citrate and EDTA by simple laboratory tests, and we compared the composition of HAS, serum, EDTA PRP and plasma by Proteome Profiler and ELISA assays. According to our results the natural ionic balance was upset in both EDTA and citrate PRP as well as in plasma. EDTA PRP contained significantly higher level of growth factors and cytokines, especially platelet derived angiogenic and inflammatory proteins, that can be explained by the significantly higher number of platelets in EDTA PRP. The composition analysis of blood derivatives revealed that although the preparation method of PRP and HAS were similar, the ionic and protein composition of HAS could be advantageous for cell function.

Biological and Mechanical Properties of Platelet-Rich Fibrin Membranes after Thermal Manipulation and Preparation in a Single-Syringe Closed System

Platelet-rich fibrin (PRF) membrane is a three-dimensional biodegradable biopolymer, which consists of platelet derived growth factors enhancing cell adhesion and proliferation. It is widely used in soft and hard tissue regeneration, however, there are unresolved problems with its clinical application. Its preparation needs open handling of the membranes, it degrades easily, and it has a low tensile strength which does not hold a suture blocking wider clinical applications of PRF. Our aim was to produce a sterile, suturable, reproducible PRF membrane suitable for surgical intervention. We compared the biological and mechanical properties of PRF membranes created by the classical glass-tube and those that were created in a single-syringe closed system (hypACT Inject), which allowed aseptic preparation. HypACT Inject device produces a PRF membrane with better handling characteristics without compromising biological properties. Freeze-thawing resulted in significantly higher tensile strength and higher cell adhesion at a lower degradation rate of the membranes. Mesenchymal stem cells seeded onto PRF membranes readily proliferated on the surface of fresh, but even better on freeze/thawed or freeze-dried membranes. These data show that PRF membranes can be made sterile, more uniform and significantly stronger which makes it possible to use them as suturable surgical membranes.