Hyaluronic acid biomaterial for human tissue-engineered skin substitutes: Preclinical comparative in vivo study of wound healing

Design and evaluation of a bilayered dermal/hypodermal 3D model using a biomimetic hydrogel formulation

Due to the limitations of the current skin wound treatments, it is highly valuable to have a wound healing formulation that mimics the extracellular matrix (ECM) and mechanical properties of natural skin tissue. Here, a novel biomimetic hydrogel formulation has been developed based on a mixture of Agarose-Collagen Type I (AC) combined with skin ECM-related components: Dermatan sulfate (DS), Hyaluronic acid (HA), and Elastin (EL) for its application in skin tissue engineering (TE). Different formulations were designed by combining AC hydrogels with DS, HA, and EL. Cell viability, hemocompatibility, physicochemical, mechanical, and wound healing properties were investigated. Finally, a bilayered hydrogel loaded with fibroblasts and mesenchymal stromal cells was developed using the Ag-Col I-DS-HA-EL (ACDHE) formulation. The ACDHE hydrogel displayed the best in vitro results and acceptable physicochemical properties. Also, it behaved mechanically close to human native skin and exhibited good cytocompatibility. Environmental scanning electron microscopy (ESEM) analysis revealed a porous microstructure that allows the maintenance of cell growth and ECM-like structure production. These findings demonstrate the potential of the ACDHE hydrogel formulation for applications such as an injectable hydrogel or a bioink to create cell-laden structures for skin TE.

Pharmaceutical applications and requirements of resins for printing by digital light processing (DLP)

The digital light processing (DLP) printer has proven to be effective in biomedical and pharmaceutical applications, as its printing method does not induce shear and a strong temperature on the resin. In addition, the DLP printer has good resolution and print quality, which makes it possible to print complex structures with a customized shape, being used for various purposes ranging from jewelry application to biomedical and pharmaceutical areas. The big disadvantage of DLP is the lack of a biocompatible and non-toxic resin on the market. To overcome this limitation, an ideal resin for biomedical and pharmaceutical use is needed. The resin must have appropriate properties, so that the desired format is printed when with a determined wavelength is applied. Thus, the aim of this work is to bring the basic characteristics of the resins used by this printing method and the minimum requirements to start printing by DLP for pharmaceutical and biomedical applications. The DLP method has proven to be effective in obtaining pharmaceutical devices such as drug delivery systems. Furthermore, this technology allows the printing of devices of ideal size, shape and dosage, providing the patient with personalized treatment.

Progress in the Use of Hydrogels for Antioxidant Delivery in Skin Wounds

The skin is the largest organ of the body, and it acts as a protective barrier against external factors. Chronic wounds affect millions of people worldwide and are associated with significant morbidity and reduced quality of life. One of the main factors involved in delayed wound healing is oxidative injury, which is triggered by the overproduction of reactive oxygen species. Oxidative stress has been implicated in the pathogenesis of chronic wounds, where it is known to impair wound healing by causing damage to cellular components, delaying the inflammatory phase of healing, and inhibiting the formation of new blood vessels. Thereby, the treatment of chronic wounds requires a multidisciplinary approach that addresses the underlying causes of the wound, provides optimal wound care, and promotes wound healing. Among the promising approaches to taking care of chronic wounds, antioxidants are gaining interest since they offer multiple benefits related to skin health. Therefore, in this review, we will highlight the latest advances in the use of natural polymers with antioxidants to generate tissue regeneration microenvironments for skin wound healing.

Pioneering a paradigm shift in tissue engineering and regeneration with polysaccharides and proteins-based scaffolds: A comprehensive review

In the realm of modern medicine, tissue engineering and regeneration stands as a beacon of hope, offering the promise of restoring form and function to damaged or diseased organs and tissues. Central to this revolutionary field are biological macromolecules-nature's own blueprints for regeneration. The growing interest in bio-derived macromolecules and their composites is driven by their environmentally friendly qualities, renewable nature, minimal carbon footprint, and widespread availability in our ecosystem. Capitalizing on these unique attributes, specific composites can be tailored and enhanced for potential utilization in the realm of tissue engineering (TE). This review predominantly concentrates on the present research trends involving TE scaffolds constructed from polysaccharides, proteins and glycosaminoglycans. It provides an overview of the prerequisites, production methods, and TE applications associated with a range of biological macromolecules. Furthermore, it tackles the challenges and opportunities arising from the adoption of these biomaterials in the field of TE. This review also presents a novel perspective on the development of functional biomaterials with broad applicability across various biomedical applications.

A review of the current state of natural biomaterials in wound healing applications

Skin, the largest biological organ, consists of three main parts: the epidermis, dermis, and subcutaneous tissue. Wounds are abnormal wounds in various forms, such as lacerations, burns, chronic wounds, diabetic wounds, acute wounds, and fractures. The wound healing process is dynamic, complex, and lengthy in four stages involving cells, macrophages, and growth factors. Wound dressing refers to a substance that covers the surface of a wound to prevent infection and secondary damage. Biomaterials applied in wound management have advanced significantly. Natural biomaterials are increasingly used due to their advantages including biomimicry of ECM, convenient accessibility, and involvement in native wound healing. However, there are still limitations such as low mechanical properties and expensive extraction methods. Therefore, their combination with synthetic biomaterials and/or adding bioactive agents has become an option for researchers in this field. In the present study, the stages of natural wound healing and the effect of biomaterials on its direction, type, and level will be investigated. Then, different types of polysaccharides and proteins were selected as desirable natural biomaterials, polymers as synthetic biomaterials with variable and suitable properties, and bioactive agents as effective additives. In the following, the structure of selected biomaterials, their extraction and production methods, their participation in wound healing, and quality control techniques of biomaterials-based wound dressings will be discussed.

Design of Cell-Adhesive Shellac Derivatives and Endowment of Photoswitchable Cell-Adhesion Properties

The emergence of new biodegradable cell-adhesion materials is an attractive topic in biomaterial chemistry, particularly for the development of cell incubation scaffolds and drug encapsulation materials used in in situ regenerative therapy. Shellac is a natural resin with unique film-forming properties and high miscibility with various chemicals, in addition to being biodegradable and nontoxic to biological systems. However, since native shellac does not adhere to mammalian cells, there have been no reports of using shellac to develop cell-adhesive biomaterials. In this study, we report on the development of cell-adhesive shellac derivatives through slight chemical modification. Shellac is a mixture of oligoesters that consists of hydroxyl fatty acids and resin acids, and therefore, all oligomers have one carboxylic acid group at the terminal. We discovered that a simple modification of hydrophobic chemical groups, particularly those containing aromatic groups in the ester form, could dramatically improve cell-adhesion properties for mammalian cells. Furthermore, by using photocleavable esters containing aromatic groups, we successfully endowed photoswitchable properties in cell adhesion. Given that shellac is a low-cost, biodegradable, and nontoxic natural resin, the modified shellacs have the potential to become new and attractive biomaterials applicable to in situ regenerative therapy.

In vitro comparison of human plasma-based and self-assembled tissue-engineered skin substitutes: two different manufacturing processes for the treatment of deep and difficult to heal injuries

Background

The aim of this in vitro study was to compare side-by-side two models of human bilayered tissue-engineered skin substitutes (hbTESSs) designed for the treatment of severely burned patients. These are the scaffold-free self-assembled skin substitute (SASS) and the human plasma-based skin substitute (HPSS).

Methods

Fibroblasts and keratinocytes from three humans were extracted from skin biopsies (N = 3) and cells from the same donor were used to produce both hbTESS models. For SASS manufacture, keratinocytes were seeded over three self-assembled dermal sheets comprising fibroblasts and the extracellular matrix they produced (n = 12), while for HPSS production, keratinocytes were cultured over hydrogels composed of fibroblasts embedded in either plasma as unique biomaterial (Fibrin), plasma combined with hyaluronic acid (Fibrin-HA) or plasma combined with collagen (Fibrin-Col) (n/biomaterial = 9). The production time was 46-55 days for SASSs and 32-39 days for HPSSs. Substitutes were characterized by histology, mechanical testing, PrestoBlue™-assay, immunofluorescence (Ki67, Keratin (K) 10, K15, K19, Loricrin, type IV collagen) and Western blot (type I and IV collagens).

Results

The SASSs were more resistant to tensile forces (p-value < 0.01) but less elastic (p-value < 0.001) compared to HPSSs. A higher number of proliferative Ki67+ cells were found in SASSs although their metabolic activity was lower. After epidermal differentiation, no significant difference was observed in the expression of K10, K15, K19 and Loricrin. Overall, the production of type I and type IV collagens and the adhesive strength of the dermal-epidermal junction was higher in SASSs.

Conclusions

This study demonstrates, for the first time, that both hbTESS models present similar in vitro biological characteristics. However, mechanical properties differ and future in vivo experiments will aim to compare their wound healing potential.

Comparison of Two Human Skin Cell Isolation Protocols and Their Influence on Keratinocyte and Fibroblast Culture

For the development of advanced therapies, the use of primary cells instead of cell lines is preferred. The manufacture of human tissue-engineered skin substitutes requires efficient isolation and culture protocols allowing a massive expansion of the cells in culture from an initial specimen of a minimal size. This study compared two skin cell isolation protocols, routinely applied in two clinical laboratories. Epithelial (keratinocytes) and dermal (fibroblasts) cells were isolated and cultured from three human skin biopsies (N = 3). The two-step digestion protocol (LOEX-Protocol) firstly used thermolysin to enzymatically disrupt the dermal-epidermal junction while, for the one-step digestion protocol (UPCIT-Protocol), mechanical detachment with scissors was applied. Then, the epidermal and dermal layers were digested, respectively, to achieve cell isolation. The cell size, viability, yield and growth were analyzed over five passages (P). The colony-forming efficiency (CFE) and Keratin 19 (K19) expression of epithelial cells were also assessed after P0 and P1. Regarding the dermal cells, no significant differences were observed in the tested parameters of isolation and culture. However, for the epithelial cells, viability was higher (93% vs. 85%) and the number of cells extracted per cm2 of skin was 3.4 times higher using the LOEX-Protocol compared to the UPCIT-Protocol. No significant difference was observed for any parameter once the keratinocytes were cultured from P1 to P4. The CFE and K19 expression decreased from P0 to P1 in both protocols, probably due to the culture process. This study shows that both protocols enable the efficient isolation of skin dermal and epithelial cells and subsequent culture to produce grafts destined for the treatment of patients.

Accelular nanofibrous bilayer scaffold intrapenetrated with polydopamine network and implemented into a full-thickness wound of a white-pig model affects inflammation and healing process

Treatment of complete loss of skin thickness requires expensive cellular materials and limited skin grafts used as temporary coverage. This paper presents an acellular bilayer scaffold modified with polydopamine (PDA), which is designed to mimic a missing dermis and a basement membrane (BM). The alternate dermis is made from freeze-dried collagen and chitosan (Coll/Chit) or collagen and a calcium salt of oxidized cellulose (Coll/CaOC). Alternate BM is made from electrospun gelatin (Gel), polycaprolactone (PCL), and CaOC. Morphological and mechanical analyzes have shown that PDA significantly improved the elasticity and strength of collagen microfibrils, which favorably affected swelling capacity and porosity. PDA significantly supported and maintained metabolic activity, proliferation, and viability of the murine fibroblast cell lines. The in vivo experiment carried out in a domestic Large white pig model resulted in the expression of pro-inflammatory cytokines in the first 1-2 weeks, giving the idea that PDA and/or CaOC trigger the early stages of inflammation. Otherwise, in later stages, PDA caused a reduction in inflammation with the expression of the anti-inflammatory molecule IL10 and the transforming growth factor β (TGFβ1), which could support the formation of fibroblasts. Similarities in treatment with native porcine skin suggested that the bilayer can be used as an implant for full-thickness skin wounds and thus eliminate the use of skin grafts.

Hyaluronic acid encapsulated silver metal organic framework for the construction of a slow-controlled bifunctional nanostructure: Antibacterial and anti-inflammatory in intrauterine adhesion repair

Intrauterine adhesion (IUA) is a common gynecological disease caused by endometrial injury, which might result in abnormal menstruation, miscarriage, and even fetal deaths. Nevertheless, existing treatment strategies such as intrauterine device and uterine cavity balloons only provide a physical barrier, and not circumvent inflammation of endometrial microenvironment and retrograde infection. In this study, a slow-controlled bifunctional nanostructure was developed via encapsulating hyaluronic acid (HA) on surface of silver-metal organic framework (Ag-MOF), and then loaded in poly lactic-co-glycolic acid scaffold to prevent IUA. In therapy, macro-molecule of HA provided anti-inflammatory function by the adjustment of signal transduction pathways of macrophage surface receptors, whereas Ag-MOF inactivated bacteria by destroying bacterial membrane and producing reactive oxygen. Significantly, the coated HA effectively avoided burst release of Ag⁺, thus achieving long-term antibacterial property and good biocompatibility. Antibacterial results showed antibacterial rate of the scaffold reached 87.8 % against staphylococcus aureus. Anti-inflammatory assays showed that the scaffold inhibited the release of inflammatory cytokines and promoted the release of anti-inflammatory cytokines. Moreover, in vitro cell tests revealed that the scaffold effectively inhibited fibroblast growth, indicating its good ability to prevent IUA. Taken together, the scaffold may be a promising candidate for IUA treatment.

3D Printing as a Technological Strategy for the Personalized Treatment of Wound Healing

Wound healing is a dynamic process which involves stages of hemostasis, inflammation, proliferation and remodeling. Any error in this process results in abnormal wound healing, generating financial burdens for health systems and even affecting the physical and mental health of the patient. Traditional dressings do not meet the complexities of ideal treatment in all types of wounds. For this reason, in the last decades, different materials for drug delivery and for the treatment of wounds have been proposed reaching novel level of standards, such as 3D printing techniques. The use of natural or synthetic polymers, and the correct design of these printed products loaded with cells and/or combined with active compounds, can generate an effective system for the treatment of wounds, improving the healing process and generating customized dressings according to the patient needs. This manuscript provides a comprehensive review of different types of 3D printing techniques, as well as its use in wound healing and its different stages, including the advantages and limitations of additive manufacturing and future perspectives.

Comparison of biopolymer scaffolds for the fabrication of skin substitutes in a porcine wound model

This study compared three acellular scaffolds as templates for the fabrication of skin substitutes. A collagen-glycosaminoglycan (C-GAG), a biodegradable polyurethane foam (PUR) and a hybrid combination (PUR/C-GAG) were investigated. Scaffolds were prepared for cell inoculation. Fibroblasts and keratinocytes were serially inoculated onto the scaffolds and co-cultured for 14 days before transplantation. Three pigs each received four full-thickness 8 cm × 8 cm surgical wounds, into which a biodegradable temporising matrix (BTM) was implanted. Surface seals were removed after integration (28 days), and three laboratory-generated skin analogues and a control split-thickness skin graft (STSG) were applied for 16 weeks. Punch biopsies confirmed engraftment and re-epithelialisation. Biophysical wound parameters were also measured and analysed. All wounds showed greater than 80% epithelialisation by day 14 post-transplantation. The control STSG displayed 44% contraction over the 16 weeks, and the test scaffolds, C-GAG 64%, Hybrid 66.7% and PUR 67.8%. Immunohistochemistry confirmed positive epidermal keratins and basement membrane components (Integrin alpha-6, collagens IV and VII). Collagen deposition and fibre organisation indicated the degree of fibrosis and scar produced for each graft. All scaffold substitutes re-epithelialised by 4 weeks. The percentage of original wound area for the Hybrid and PUR was significantly different than the STSG and C-GAG, indicating the importance of scaffold retainment within the first 3 months post-transplant. The PUR/C-GAG scaffolds reduced the polymer pore size, assisting cell retention and reducing the contraction of in vitro collagen. Further investigation is required to ensure reproducibility and scale-up feasibility.

HYDRHA: Hydrogels of hyaluronic acid. New biomedical approaches in cancer, neurodegenerative diseases, and tissue engineering

In the last decade, hyaluronic acid (HA) has attracted an ever-growing interest in the biomedical engineering field as a biocompatible, biodegradable, and chemically versatile molecule. In fact, HA is a major component of the extracellular matrix (ECM) and is essential for the maintenance of cellular homeostasis and crosstalk. Innovative experimental strategies in vitro and in vivo using three-dimensional (3D) HA systems have been increasingly reported in studies of diseases, replacement of tissue and organ damage, repairing wounds, and encapsulating stem cells for tissue regeneration. The present work aims to give an overview and comparison of recent work carried out on HA systems showing advantages, limitations, and their complementarity, for a comprehensive characterization of their use. A special attention is paid to the use of HA in three important areas: cancer, diseases of the central nervous system (CNS), and tissue regeneration, discussing the most innovative experimental strategies. Finally, perspectives within and beyond these research fields are discussed.

Cytotoxicity, Epidermal Barrier Function and Cytokine Evaluation after Antiseptic Treatment in Bioengineered Autologous Skin Substitute

Bioengineered autologous skin substitutes (BASS) technology is an emerging field for skin burn therapy. However, further studies on BASS characterization, viability against standard procedures for wound healing, and protocol optimization are necessary for the improvement of BASS technology for clinical use. The aim of this study is to evaluate the effect of common antiseptics for clinical use in BASS, focusing on cell viability, inflammatory cytokine pattern, and epithelium and skin barrier integrity, in order to establish the most adequate treatment for wound care after BASS grafting. Human keratinocytes (hKT) and dermal fibroblasts (hDF) were isolated from foreskin samples and integrated into hyaluronic acid-based BASS. The following antiseptics were applied every 48 h: ethanol (70%), chlorhexidine digluconate (1%), sodium hypochlorite (0.02%), povidone iodine (100 mg/mL), and polyhexanide (0.1%), during a follow-up of 16 days. Sodium hypochlorite was the only treatment that showed a high cell viability percentage throughout the evaluation time compared to other antiseptic treatments, as well as a similar cytokine secretion pattern as control BASS. No significant differences were found regarding epidermal barrier function. These findings point towards sodium hypochlorite being the least aggressive antiseptic treatment for BASS post-transplantation wound care.

Layered dermal reconstitution through epigallocatechin 3-gallate loaded chitosan nanoparticle within enzymatically crosslinked polyvinyl alcohol/collagen fibrous mat

Biocompatible electrospun fiber comprising bioactive substrates has potential to implant into the wound site as a reliable therapeutic approach in tissue regeneration. Here, electrospun polyvinyl alcohol conjugated tyramine (PVA-Tyr) and collagen (Col) fibrous mat containing chitosan nanoparticle loaded with epigallocatechin 3-gallate (NCs-EGCG) developed and the composite was applied to evaluate in vivo wound healing ability of fabricated wound patch. The synthesized PVA-Tyr and Col were electrospun and crosslinked through peroxidase reaction in presence of vaporized H2O2 as an electron donor which covalently proceeded conjugation of phenolic groups and could develop hybrid fibrous mat in stable structure and uniform shapes. The EGCG as anti-oxidative/inflammatory substrate was encapsulated efficiently in NCs and released in a sustained manner. The hybrid fibers seeded with adipose-derived stem cells presented appropriate biocompatibility from biophysical and biochemical viewpoints and in following wound healing ability in a full-thickness excisional animal model. Fourier transform infrared spectroscopy (FTIR) confirmed all typical absorption characteristics of PVA-Tyr and Col as well as NCs and EGCG. The results showed the perfect hydrophilic/hydrophobic ratio and good mechanical and structural characteristics including shape uniformity and porosity. Interestingly, cellular attachment and proliferation on the PVA-Tyr/Col fibers containing NCs-EGCG were higher than control samples. The histological analysis of hybrid fibrous patch could be suggested the applicability of this structure as suitable skin substitutes to repair injured skin.

Production and Characterization of a Coconut Oil Incorporated Gelatin-Based Film and Its Potential Biomedical Application

The influence of coconut oil (CO) on a gelatin-based film was investigated when used as a potential wound dressing material. There is limited study on CO in protein-based wound dressing materials. Therefore, in this study a self-supporting, continuous and homogenous CO incorporated gelatin-based film was formulated and obtained by solution casting method. The influence of CO on physicochemical and thermal properties of gelatin-based film was also determined. Moreover, the effect CO in gelatin films on cell viability and cell migration was analysed with a preliminary cell culture study. Homogenous dispersion of 10% (w/w) CO was obtained in films when 3% (v/w) Tween 80, a surfactant, was incorporated to 20% (w/w) plasticized gelatin film forming solution. Effect of CO on gelatin-based film was observed via phase separation by SEM analysis. Water uptake of gelatin film with no CO, GE film; and 10% (w/w) CO incorporated GE film, GE-CO, were 320% and 210%, respectively, after 3 hours in water. FTIR analysis showed triglyceride component of CO and increased hydrogen bonding between NH groups of gelatin in GE-CO films. DSC results suggested a more ordered structure of GE-CO film due to an increase in melt-like transition temperature and melting enthalpy of GE-CO film. CO content also increased cell viability, assessed by XTT Assay since cell viability was approximately 100% when L929 cell culture was incubated with GE-CO of 5-100 μg/mL. Moreover, GE-CO samples within 5-25 μg/mL concentration range, increased proliferation of L929 cells since cell viability was significantly higher than the 100% viable cell culture control (P < 0.05) which is also an indication of efficient healing. However, GE decreased viability of L929 cells significantly at 100-10 μg/mL concentration range (P < 0.05) and were toxic at concentrations of 100, 75 and 50 μg/mL which decreased ∿50% of the viability of the cells. Scratch Assay to assess in vitro wound healing showed cell migration towards scratch after 24 h as an indication of wound healing only in GE-CO samples. This study showed that, CO could efficiently be added to gelatin-based films for preparation of a primary wound dressing biomaterial which is also demonstrated to have a promising wound healing effect for minor wounds.

Considerations on the Controlled Delivery of Bioactive Compounds through Hyaluronic Acid Membrane

(1) Background: The standard treatment for periodontal disease, a chronic inflammatory state caused by the interaction between biofilms generated by organized oral bacteria and the local host defense response, consists of calculus and biofilm removal through mechanical debridement, associated with antimicrobial therapy that could be delivered either systemically or locally. The present study aimed to determine the effectiveness of a hyaluronic acid membrane matrix as a carrier for the controlled release of the active compounds of a formulation proposed as a topical treatment for periodontal disease, and the influence of pH on the complex system’s stability. (2) Methods: The obtained hyaluronic acid (HA) hydrogel membrane with dispersed melatonin (MEL), metronidazole (MZ), and tetracycline (T) was completely characterized through FTIR, XRD, thermal analysis, UV-Vis and fluorescence spectroscopy, fluorescence microscopy, zeta potential and dielectric analysis. The MTT viability test was applied to check the cytotoxicity of the obtained membranes, while the microbiological assessment was performed against strains of Staphylococcus spp. and Streptococcus spp. The spectrophotometric investigations allowed to follow up the release profile from the HA matrix for MEL, MZ, and T present in the topical treatment considered. We studied the behavior of the active compounds against the pH of the generated environment, and the release profile of the bioactive formulation based on the specific comportment towards pH variation. The controlled delivery of the bioactive compounds using HA as a supportive matrix was modeled applying Korsmeyer–Peppas, Higuchi, first-order kinetic models, and a newly proposed pseudo-first-order kinetic model. (3) Results: It was observed that MZ and T were released at higher active concentrations than MEL when the pH was increased from 6.75, specific for patients with periodontitis, to a pH of 7.10, characterizing the healthy patients. Additionally, it was shown that for MZ, there is a burst delivery up to 2.40 × 10⁻⁵ mol/L followed by a release decrease, while for MEL and T a short release plateau was recorded up to a concentration of 1.80 × 10⁻⁵ mol/L for MEL and 0.90 × 10⁻⁵ mol/L for T, followed by a continuous release; (4) Conclusions: The results are encouraging for the usage of the HA membrane matrix as releasing vehicle for the active components of the proposed topical treatment at a physiological pH.

α-Linolenic acid and linoleic acid modulate the lipidome and the skin barrier of a tissue-engineered skin model

Polyunsaturated fatty acids (PUFAs) play an important role in the establishment and the maintenance of the skin barrier function. However, the impact of their derived lipid mediators remains unclear. Skin substitutes were engineered according to the self-assembly method with a culture medium supplemented with 10 μM of both α-linolenic acid (ALA) and linoleic acid (LA). The supplementation with ALA and LA decreased testosterone absorption through a tissue-engineered reconstructed skin model, thus indicating an improved skin barrier function following supplementation. The exogenously provided fatty acids were incorporated into the phospholipid and triglyceride fractions of the skin substitutes. Indeed, the dual supplementation increased the levels of eicosapentaenoic acid (EPA) (15-fold), docosapentaenoic acid (DPA) (3-fold), and LA (1.5-fold) in the epidermal phospholipids while it increased the levels of ALA (>20-fold), DPA (3-fold) and LA (1.5-fold) in the epidermal triglycerides. The bioactive lipid mediator profile of the skin substitutes, including prostaglandins, hydroxy-fatty acids, N-acylethanolamines and monoacylglycerols, was next analyzed using liquid chromatography-tandem mass spectrometry. The lipid supplementation further modulated bioactive lipid mediator levels of the reconstructed skin substitutes, leading to a lipid mediator profile more representative of the one found in normal human skin. These findings show that an optimized supply of PUFAs via culture media is essential for the establishment of improved barrier function in vitro. STATEMENT OF SIGNIFICANCE: Supplementation of the culture medium with 10 μM of both α-linolenic acid (ALA) and linoleic acid (LA) improved the skin barrier function of a tissue-engineered skin model. The exogenously provided fatty acids were incorporated into the phospholipid and triglyceride fractions of the skin substitutes and further modulated bioactive lipid mediator levels, including prostaglandins, hydroxy-fatty acids, N-acylethanolamines and monoacylglycerols. These findings highlight the important role of ALA and LA in skin homeostasis and show that an optimized supply of polyunsaturated fatty acids via culture media is essential for the establishment of improved barrier function in vitro.

The 3D Bioprinted Scaffolds for Wound Healing

Skin tissue engineering and regeneration aim at repairing defective skin injuries and progress in wound healing. Until now, even though several developments are made in this field, it is still challenging to face the complexity of the tissue with current methods of fabrication. In this review, short, state-of-the-art on developments made in skin tissue engineering using 3D bioprinting as a new tool are described. The current bioprinting methods and a summary of bioink formulations, parameters, and properties are discussed. Finally, a representative number of examples and advances made in the field together with limitations and future needs are provided.

Development of novel hyaluronic acid/human-like collagen bio-composite membranes: A facile "surface modification-assembly" approach

The merits of hyaluronic acid (HA) as a representative biological carbohydrate polymers especially in bioactivity and tailorability makes it ideal building block for the engineering of tissue engineering scaffolds. HA-based bio-composites integrate the characteristics of multi-component materials, possessing versatility and further improving the therapeutic efficacy. Human like collagen (HLC), which is hydrophilic, biomimetic, and bio-safe, with human tissue-derived collagen biofunction, has attracted extensive attention worldwide. Herein, we developed a novel method for HA/HLC bio-composite membranes preparation, comprising one-step surface modification-assembly process by which the HLC self-assembles are simultaneously loaded on the oxidized-modified HA (oxi-HA) from the surface/interface micro-scale. Comprehensive material characterizations and in vitro/in vivo biostudies proved that the HLC/oxi-HA composite membranes exhibited significantly enhanced biological activity, hemostatic performances, and wound healing properties compared to that of the pristine HA. The results of this study highlight the great potential of the prepared biomimetic HLC/oxi-HA bio-composites as a new generation of multifunctional HA-based wound-healing materials.

Facile fabrication of soy protein isolate-functionalized nanofibers with enhanced biocompatibility and hemostatic effect on full-thickness skin injury

Extensive full-thickness skin defect lacks self-healing ability. Tissue engineering wound dressing is considered as the most promising approach to promote wound healing. In this study, a series of biocompatible and hemostatic nanofiber dressings were fabricated. Soy protein isolate (SPI) and poly(L-lactic acid) (PLLA) solutions were mixed in certain proportions for high-voltage electrospinning. The obtained products were coded as SPNF-n (n = 100, 80, 60 and 40, corresponding to the weight percentage of PLLA solution). We found that SPNF-n (n = 100, 80, 60 and 40) could facilitate the adhesion and spread of L929 cells. In particular, SPNF-80 was capable of promoting fibroblast proliferation and diminishing inflammation. Compared with the neat PLLA film (SPNF-100), the biosafety and hemostatic effect of SPNF-80 got significantly improved. The hemostatic effect of SPNF-80 was comparable with that of a commercial gelatin sponge. In vivo wound healing assay demonstrated that SPNF-80 could accelerate the wound healing process by enhancing vascularization, re-epithelization and collagen formation. In conclusion, our results reveal that SPNF-n has good biocompatibility and hemostatic effect, and exhibits great application potential in wound healing.

Basic Quality Controls Used in Skin Tissue Engineering

Reconstruction of skin defects is often a challenging effort due to the currently limited reconstructive options. In this sense, tissue engineering has emerged as a possible alternative to replace or repair diseased or damaged tissues from the patient's own cells. A substantial number of tissue-engineered skin substitutes (TESSs) have been conceived and evaluated in vitro and in vivo showing promising results in the preclinical stage. However, only a few constructs have been used in the clinic. The lack of standardization in evaluation methods employed may in part be responsible for this discrepancy. This review covers the most well-known and up-to-date methods for evaluating the optimization of new TESSs and orientative guidelines for the evaluation of TESSs are proposed.

Cellular human tissue-engineered skin substitutes investigated for deep and difficult to heal injuries

Wound healing is an important function of skin; however, after significant skin injury (burns) or in certain dermatological pathologies (chronic wounds), this important process can be deregulated or lost, resulting in severe complications. To avoid these, studies have focused on developing tissue-engineered skin substitutes (TESSs), which attempt to replace and regenerate the damaged skin. Autologous cultured epithelial substitutes (CESs) constituted of keratinocytes, allogeneic cultured dermal substitutes (CDSs) composed of biomaterials and fibroblasts and autologous composite skin substitutes (CSSs) comprised of biomaterials, keratinocytes and fibroblasts, have been the most studied clinical TESSs, reporting positive results for different pathological conditions. However, researchers' purpose is to develop TESSs that resemble in a better way the human skin and its wound healing process. For this reason, they have also evaluated at preclinical level the incorporation of other human cell types such as melanocytes, Merkel and Langerhans cells, skin stem cells (SSCs), induced pluripotent stem cells (iPSCs) or mesenchymal stem cells (MSCs). Among these, MSCs have been also reported in clinical studies with hopeful results. Future perspectives in the field of human-TESSs are focused on improving in vivo animal models, incorporating immune cells, designing specific niches inside the biomaterials to increase stem cell potential and developing three-dimensional bioprinting strategies, with the final purpose of increasing patient's health care. In this review we summarize the use of different human cell populations for preclinical and clinical TESSs under research, remarking their strengths and limitations and discuss the future perspectives, which could be useful for wound healing purposes.

Shape-Morphing Fibrous Hydrogel/Elastomer Bilayers Fabricated by a Combination of 3D Printing and Melt Electrowriting for Muscle Tissue Regeneration

This paper reports an approach for the fabrication of shape-changing bilayered scaffolds, which allow the growth of aligned skeletal muscle cells, using a combination of 3D printing of hyaluronic acid hydrogel, melt electrowriting of thermoplastic polycaprolactone-polyurethane elastomer, and shape transformation. The combination of the selected materials and fabrication methods allows a number of important advantages such as biocompatibility, biodegradability, and suitable mechanical properties (elasticity and softness of the fibers) similar to those of important components of extracellular matrix (ECM), which allow proper cell alignment and shape transformation. Myoblasts demonstrate excellent viability on the surface of the shape-changing bilayer, where they occupy space between fibers and align along them, allowing efficient cell patterning inside folded structures. The bilayer scaffold is able to undergo a controlled shape transformation and form multilayer scroll-like structures with cells encapsulated inside. Overall, the importance of this approach is the fabrication of tubular constructs with a patterned interior that can support the proliferation and alignment of muscle cells for muscle tissue regeneration.

Cytotoxicity and Epidermal Barrier Function Evaluation of Common Antiseptics for Clinical Use in an Artificial Autologous Skin Model

Bioengineered artificial skin substitutes (BASS) are the main treatment used in addition to autografts when skin injuries involve a large body surface area. Antiseptic/antibiotic treatment is necessary to prevent infections in the BASS implant area. This study aims to evaluate the effect of antiseptics and antibiotics on cell viability, structural integrity, and epidermal barrier function in BASS based on hyaluronic acid during a 28 day follow-up period. Keratinocytes (KTs) and dermal fibroblasts (DFs) were isolated from skin samples and used to establish BASS. The following antibiotic/antiseptic treatment was applied every 48 h: colistin (1%), chlorhexidine digluconate (1%), sodium chloride (0.02%), and polyhexanide (0.1%). Cell viability (LIVE/DEAD® assay), structural integrity (histological evaluation), and epidermal barrier function (trans-epidermal water loss, (TEWL), Tewameter®) were also evaluated. Cell viability percentage of BASS treated with chlorhexidine digluconate was significantly lower (p ≤ 0.001) than the other antiseptics at day 28. Compared to other treatments, chlorhexidine digluconate and polyhexanide significantly affected the epithelium. No significant differences were found regarding epidermal barrier. These results may be useful for treatment protocols after implantation of BASS in patients and evaluating them in clinical practice. BASS represent a suitable model to test in vitro the impact of different treatments of other skin wounds.

Advanced Medical Therapies in the Management of Non-Scarring Alopecia: Areata and Androgenic Alopecia

Alopecia is a challenging condition for both physicians and patients. Several topical, intralesional, oral, and surgical treatments have been developed in recent decades, but some of those therapies only provide partial improvement. Advanced medical therapies are medical products based on genes, cells, and/or tissue engineering products that have properties in regenerating, repairing, or replacing human tissue. In recent years, numerous applications have been described for advanced medical therapies. With this background, those therapies may have a role in the treatment of various types of alopecia such as alopecia areata and androgenic alopecia. The aim of this review is to provide dermatologists an overview of the different advanced medical therapies that have been applied in the treatment of alopecia, by reviewing clinical and basic research studies as well as ongoing clinical trials.

From Grafts to Human Bioengineered Vascularized Skin Substitutes

The skin plays an important role in the maintenance of the human's body physiological homeostasis. It acts as a coverage that protects against infective microorganism or biomechanical impacts. Skin is also implied in thermal regulation and fluid balance. However, skin can suffer several damages that impede normal wound-healing responses and lead to chronic wounds. Since the use of autografts, allografts, and xenografts present source limitations and intense rejection associated problems, bioengineered artificial skin substitutes (BASS) have emerged as a promising solution to address these problems. Despite this, currently available skin substitutes have many drawbacks, and an ideal skin substitute has not been developed yet. The advances that have been produced on tissue engineering techniques have enabled improving and developing new arising skin substitutes. The aim of this review is to outline these advances, including commercially available skin substitutes, to finally focus on future tissue engineering perspectives leading to the creation of autologous prevascularized skin equivalents with a hypodermal-like layer to achieve an exemplary skin substitute that fulfills all the biological characteristics of native skin and contributes to wound healing.

Bioengineered Skin Intended as In Vitro Model for Pharmacosmetics, Skin Disease Study and Environmental Skin Impact Analysis

This review aims to be an update of Bioengineered Artificial Skin Substitutes (BASS) applications. At the first moment, they were created as an attempt to replace native skin grafts transplantation. Nowadays, these in vitro models have been increasing and widening their application areas, becoming important tools for research. This study is focus on the ability to design in vitro BASS which have been demonstrated to be appropriate to develop new products in the cosmetic and pharmacology industry. Allowing to go deeper into the skin disease research, and to analyze the effects provoked by environmental stressful agents. The importance of BASS to replace animal experimentation is also highlighted. Furthermore, the BASS validation parameters approved by the OECD (Organisation for Economic Co-operation and Development) are also analyzed. This report presents an overview of the skin models applicable to skin research along with their design methods. Finally, the potential and limitations of the currently available BASS to supply the demands for disease modeling and pharmaceutical screening are discussed.

[Suitability of biological acellular dermal matrices as a skin replacement]

INTRODUCTION

 Tissue defects are associated with loss of epidermal and dermal components of the skin. For full-thickness tissue defects, dermal equivalents are useful to enable rapid wound closure. Split-thickness skin grafts are associated with loss of tissue elasticity resulting in scar contractures that can impair joint mobility. Synthetic collagen matrices and allogeneic acellular dermal matrices (ADM) are commercially available and could serve as skin tissue replacement. The aim of this study was to investigate whether ADM of different dermal layers or bioartificial matrices can serve as cutaneous replacement. For this purpose, cellular migration, differentiation and the inflammatory reaction were studied in an established ex vivo skin organ model.

MATERIALS AND METHODS

 Human split-thickness skin grafts were transplanted onto ADM (Epiflex, DIZG, Berlin, Germany), de-epidermized dermis (DED) or an artificial collagen-elastin matrix (Matriderm, Dr. Suwelack, Billerbeck, Germany). Epithelial migration was studied using an established skin culture model at the air-liquid interface. In addition, the effect of tissue from different dermal compartments, e. g. papillar and reticular dermis, on epithelial migration was compared. Epithelial resurfacing and differentiation of matrices as well as the inflammatory reaction were studied using histological, immunohistochemical and biochemical analyses.

RESULTS AND CONCLUSION

 Significantly more epithelial outgrowth area was found on DED (2.54 mm ± 0.43 mm, mean ± SEM) compared to papillary ADM (1.32 mm ± 0.44 mm, p = 0.039), to reticular ADM (no horizontal growth, p < 0.0001) and collagen-elastin matrix (0.78 mm ± 0.11 mm, p = 0.0056) measured by fluorescence microscopy over 10 days presumably due to the presence of pro-migratory basement membrane residues on DED. Reepithelialization was significantly higher (p < 0.002) on papillary dermis compared to ADM of reticular origin. In contrast to the biological matrices, a complete horizontal penetration was found in the macroporous collagen-elastin matrix. Pro-inflammatory mediators varied depending on the human skin donor and matrix. In summary, the biochemical structure of the matrix' surface and its origin influenced the epithelial behaviour with regard to migration, differentiation and inflammatory response.