Physical and antibacterial properties of corn distarch phosphate/carboxymethyl cellulose composite films containing tea polyphenol

Composite film based on carboxymethyl cellulose and gellan gum with honokiol-β-cyclodextrin inclusion complex: Characterization and application in strawberry preservation

The aim of this study is to fabricate a biodegradable film based on carboxymethyl cellulose and gellan gum (CMC/GG) with the honokiol/β-cyclodextrin inclusion complex (HNK/β-CD). The HNK/β-CD was prepared by freeze-drying and its physicochemical properties were investigated. Then HNK/β-CD was added to CMC/GG solution to form CMC/GG honokiol inclusion complex (HIC) composite film by the casting method. The physicochemical properties, antioxidant and antibacterial effects, and strawberry preservation function were investigated. The composite film with 0.18 % inclusion complex (CMC/GG/0.18 % HIC) was found to be the optimal formulation. The film had a tensile strength of 8.20 MPa and an elongation at break of 115.17 % with water vapor permeability of 0.48 g·mm·(cm2·h·KPa)-1. The increase of HNK/β-CD content yielded lower optical transmittance and water content of CMC/GG/HIC composite film, while improved the hydrophilicity value. The 2,2-diphenyl-1-picrylhydrazyl radical and 2,2'-azinobis-(3-ethylbenzthiazoline-6-sulphonate) scavenging capacities of CMC/GG/0.18 % HIC composite film were 80.83 % and 53.10 % respectively. CMC/GG/HIC composite film was bacteriostatic against Staphylococcus aureus and Candida albicans but not against Escherichia coli and Aspergillus niger. Packing strawberries with the optimized composite film can retain the appearance, titratable acidity and vitamin C content of strawberries, which was better than the commercially fresh-keeping film control group. The CMC/GG/HIC composite film overcame the shortcomings of a single material, and gained importance in food packaging applications.

Preparation of multi-barrier and multi-functional paper-based materials by chitosan, ethyl cellulose and green walnut husk biorefinery products for sustainable food packaging

The growing interest in paper-based materials for packaging is driven by their renewable and eco-friendly characteristics. However, their poor barrier performance against water, oil, and gas limits their application in the food packaging industry. In this study, we developed a simple dual-layer coating method to create water- and oil-repellent, gas barrier, antioxidant, and antibacterial paper-based materials using naturally-derived materials, including chitosan (CS), ethyl cellulose (EC), and cascade biorefinery products from green walnut husk (GWHE and CNC). The bottom CS/CNC oil-resistant coating and the top EC/GWHE water-resistant coating were applied to the paper surface. The synergistic effect of these coatings enhances the gas barrier and imparts functional properties to the paper. Compared to uncoated paper, the dual-layer-coated paper demonstrated a 239.1 % increase in tensile index, a higher kit rating value of 12/12, a lower Cobb 60 value of 3.21 mg/m2, a 44.0 % decrease in water vapor permeability (WVP), and a 90.7 % reduction in air permeability (AP). Additionally, this coated paper exhibited good antioxidant and antibacterial properties and favorable biodegradability. This study provides novel insights into the valorization of GWH waste and presents a sustainable strategy for producing high-performance paper-based materials for food packaging applications.

Effects of starch filling on physicochemical properties, functional activities, and release characteristics of PBAT-based biodegradable active films loaded with tea polyphenols

In this work, the modification of poly(butylene adipate-co-terephthalate) (PBAT) was combined with the development of active packaging films. PBAT, starch, plasticizer, and tea polyphenols (TP) were compounded and extrusion-blown into thermoplastic starch (TPS)/PBAT-TP active films. Effects of TPS contents on physicochemical properties, functional activities, biodegradability, and release kinetics of PBAT-based active films were explored. Starch interacted strongly with TP through hydrogen bonding and induced the formation of heterogeneous structures in the films. With the increase in TPS contents, surface hydrophilicity and water vapor permeability of the films increased, while mechanical properties decreased. Blending starch with PBAT greatly accelerated degradation behavior of the films, and the T30P70-TP film achieved complete degradation after 180 days. As TPS contents increased, swelling degree of the films increased and TP release were improved accordingly, resulting in significantly enhanced antioxidant and antimicrobial activities. This work demonstrated that filling starch into PBAT-based active films could achieve different antioxidant and antimicrobial activities of the films by regulating film swelling and release behavior.

Preparation and characterization of lotus root starch based bioactive edible film containing quercetin-encapsulated nanoparticle and its effect on grape preservation

The present work aimed to develop a novel bioactive edible film prepared by adding quercetin-encapsulated carboxymethyl lotus root starch nanoparticles (QNPs)，gellan gum and lotus root starch. The physicochemical characteristics, preservation effect and mechanism on grapes of the prepared film were investigated. SEM results showed that QNPs (5 %) were dispersed uniformly within lotus root starch matrix, indicating the formation of a stable composite nanoparticle film. In addition, the incorporation of QNPs (5 %) effectively improved the mechanical strength, thermal stability, barrier property and antioxidant activity of QNPs/starch film. Moreover, compared with the control, the QNPs/starch (5 %) film showed effective preservation effect on grapes during 21 days of storage at room temperature, based on the characterization by grape appearance, weight loss, firmness, and titratable acidity. Further studies found that QNPs/starch (5 %) film could exhibit enhanced antioxidant activity and potent anti-fungal ability against Botrytis cinerea, thus extending grape shelf life. In conclusion, the obtained QNPs/starch (5 %) film presented a promising application as an edible packing material for fruit preservation by antioxidant and preventing Botrytis cinerea contamination.

Synergistic effects of EDTA and lysozyme on the properties of hydroxypropyl starch nano antibacterial films

Hydroxypropyl starch (HPS) nano antibacterial films incorporating Ethylene Diamine Tetraacetic Acid (EDTA) and lysozyme (LY) were fabricated via solvent casting method. The synergistic effects of EDTA and LY on the microstructure, component interactions, color, optical, mechanical, barrier and antibacterial properties of HPS nano antibacterial films were evaluated. The results indicated that EDTA and LY were well dispersed in the matrix of the HPS nano antibacterial films, the film-forming substrates have good compatibility, resulting in a dense multi-layer structure of the HPS nano antibacterial films. The addition of EDTA and LY increased the color parameters (L*, a*, b* and △E*) of the HPS nano antibacterial films. The synergistic effects of EDTA and LY significantly decreased the light transmission of the HPS nano antibacterial films. The presence of EDTA and LY increased the tensile strength (TS) and the elongation at break (EAB) of the HPS nano antibacterial films. The TS and EAB of E2.5L1 reached the highest values of 6.329 MPa and 50.24 %, respectively. The incorporation of EDTA and LY had positive effects on the improvement of water vapor permeability (WVP) and oxygen permeability (OP). The WVP and OP of E2.5L1 reached the highest values of 0.9350 × 10-12 g cm/cm2•s•Pa and 0.297 × 10 -2 g m/m2 •d, respectively. In addition, EDTA and LY had significant synergistic effects on the antibacterial activity against S. aureus (Gram-positive bacteria) and E. coli (Gram-negative bacteria). E2.5L1 exhibited the highest antibacterial activity and the inhibition zone diameters of S. aureus and E. coli were 3.69 mm and 4.28 mm, respectively. The HPS nano antibacterial films incorporating EDTA and LY are potential functional packaging materials.

Influence of Different pH Values on Gels Produced from Tea Polyphenols and Low Acyl Gellan Gum

To explore the influence of pH values on the properties of a compound system containing tea polyphenols (TPs) and low acyl gellan gum (LGG), the color, texture characteristics, rheological properties, water holding capacity (WHC), and microstructure of the compound system were measured. The results showed that the pH value noticeably affects the color and WHC of compound gels. Gels from pH 3 to 5 were yellow, gels from pH 6 to 7 were light brown, and gels from pH 8 to 9 were dark brown. The hardness decreased and the springiness increased with an increase in pH. The steady shear results showed that the viscosity of the compound gel solutions with different pH values decreased with increasing shear rates, indicating that all of the compound gel solutions were pseudoplastic fluids. The dynamic frequency results showed that the G' and G″ of the compound gel solutions gradually decreased with increasing pH and that G' was higher than G″. No phase transition occurred in the gel state under heating or cooling conditions at pH 3, indicating that the pH 3 compound gel solution was elastic. The WHC of the pH 3 compound gel was only 79.97% but the WHC of compound gels pH 6 and pH 7 was almost 100%. The network structure of the gels was dense and stable under acidic conditions. The electrostatic repulsion between the carboxyl groups was shielded by H⁺ with increasing acidity. The three-dimensional network structure was easily formed by an increase in the interactions of the hydrogen bonds.

Extrusion-blown starch/PBAT biodegradable active films incorporated with high retentions of tea polyphenols and the release kinetics into food simulants

To reduce thermal degradation of tea polyphenols (TP) in final active packaging materials, poly(butylene adipate-co-terephthalate) (PBAT), starch, plasticizer, and TP were directly synthesized into masterbatches by one-pot method in this study without pre-dispersion, and then blown into active films. TP interacted with starch through hydrogen bonds, with little interaction with PBAT. Barrier properties were improved by incorporating TP into the films, whereas mechanical properties slightly decreased. Blending starch into PBAT greatly accelerated the degradation of the film. And the incorporation of TP slowed down the short-term degradation of the starch/PBAT film, but accelerated the long-term degradation. The initial total polyphenol content in the active film was positively related to the TP loading, whereas the initial retention rate remained above 95 % regardless of TP loadings. The retention rate of TP in active films decreased with storage time, but it was still above 80 % after 12 months, with a favorable stability. TP-loaded films displayed efficient antioxidant and antimicrobial activities with strong dose dependence. The release of TP into food simulants was mainly induced by random diffusion, with little effect from polymer swelling. The short-term release kinetics was well described by Fick's second law. This work has demonstrated the feasibility of TP being incorporated into the active films with high retention through high-throughput fabrication, which provides formula and technical options for the industrial development of active packaging materials.

Development of xanthan gum/hydroxypropyl methyl cellulose composite films incorporating tea polyphenol and its application on fresh-cut green bell peppers preservation

The aim of this work was to develop an edible packaging material with good performance that can be used for fresh-cut vegetables preservation. The xanthan (XG)-hydroxypropyl methylcellulose (HPMC)-tea polyphenols (TP) composite film (XHT) was prepared by adding TP to the composite film-forming solution of XG and HPMC. At optimum TP dosage of 6% (XHT6), the tensile strength and elongation at break were at the maximum. The antioxidant activity and antibacterial properties were also enhanced, demonstrated good inhibitory ability to Staphylococcus aureus. After 8 days, the amount of Vitamin C that was retained by XHT6 was 127.81% and 7.83% higher than unpackaged and XHT0, respectively. Additionally, the MDA content in green peppers were 39.16% and 78.87% higher than that of unpackaged and XHT0, respectively. Practical applications of XHT films in preserving fresh-cut bell peppers had also shown positive results, making it possible as potential food packaging.

Novel active starch films incorporating tea polyphenols-loaded porous starch as food packaging materials

A novel active food packaging film was developed by casting a corn starch/tea polyphenol (TP)-loaded porous starch (PS, obtained by enzymatic hydrolysis) film forming solution, with the latter helping to regulate the slow release of TP. Results showed that PS had a favorable TP adsorption capacity, and the casted films had a homogeneous distribution of the formulation components. Likewise, the active films had good mechanical properties, UV barrier properties, thermal stability, and excellent antioxidant properties. The slow release of TP from the films was sustained, which is a desired characteristic for extending the protection afforded by the active film to the food under consideration.

Tea polyphenols (TP): a promising natural additive for the manufacture of multifunctional active food packaging films

As a bioactive extract from tea leaves, tea polyphenols (TP) are safe and natural. Its excellent antioxidant and antibacterial properties are increasingly regarded as a good additive for improving degradable food packaging film properties. This article comprehensively reviewed the functional properties of active films containing TP developed recently. The effects of TP addition to enhancing active food packaging films' performance, including thickness, water sensitivity, barrier properties, color, mechanical properties, antioxidant, antibacterial, and intelligent discoloration properties, were discussed. Besides, the practical applications in food preservation of active films containing TP are also discussed. This work concluded that the addition of TP could impart antioxidant and antibacterial properties to active packaging films and act as a crosslinking agent to improve other physical and chemical properties of the film, such as mechanical and barrier properties. However, the effect of TP on specific properties of the active packaging film is complex, and the appropriate TP concentration needs to be selected according to the type of film matrix and the interaction between the components. Notably, the addition of TP improved the efficiency of the active packaging film in food preservation applications, which accelerates the process of replacing the traditional plastic-based food packaging with active packaging film.

Preparation and Characterization of Functional Films Based on Chitosan and Corn Starch Incorporated Tea Polyphenols

The functional films based on chitosan and corn starch incorporated tea polyphenols were developed through mixing the chitosan and starch solution and the powder of tea polyphenols by the casting method. The objective of this research was to investigate the effect of different concentrations of tea polyphenols on the functional properties of the films. Attenuated total reflectance Fourier transform infrared spectrometry and X-ray diffraction were used to investigate the potential interactions among chitosan, corn starch and tea polyphenols in the blend films. Physical properties of the blend films, including density, moisture content, opacity, color, water solubility and water swelling, as well as morphological characteristics, were measured. The results demonstrated that the incorporation of tea polyphenols caused the blend films to lead to a darker appearance. The water solubility of the blend film increased with the increase of tea polyphenol concentrations, while moisture content and swelling degree decreased. The hydrogen bonding between chitosan, starch and tea polyphenols restricted the movement of molecular chains and was helpful to the stability of the blend films. The results suggested that these biodegradable blend films could potentially be used as packaging films for the food and drug industries to extend the shelf life to maintain their quality and safety.

Antioxidant Films from Cassava Starch/Gelatin Biocomposite Fortified with Quercetin and TBHQ and Their Applications in Food Models

Edible and active packaging are attractive for use in food packaging applications due to their functionality and sustainability. This research developed new antioxidant active food packaging materials from cassava starch/gelatin (7:3 w/w) composite films with varied antioxidant types (quercetin and tertiary butylhydroquinone (TBHQ)) and concentrations (0–200 mg/200 mL film-forming solution) and evaluated their properties. Antioxidant addition altered the mechanical and barrier properties of the films. At 34% relative humidity (RH), increasing the concentration of quercetin increased the tensile strength and decreased the elongation at break of the composite films. Increasing quercetin and TBHQ contents increased the film water solubility and water vapor transmission rate. Intermolecular interactions between the antioxidants and films, as found in Fourier transform infrared (FT-IR) spectra and XRD micrographs, were related to the changed film functionalities. In food application studies, the cassava starch/gelatin films containing quercetin and TBHQ retarded the oxidation of lard (more than 35 days) and delayed the redness discoloration of pork. Cassava starch/gelatin composite films integrated with quercetin and TBHQ can be utilized as active packaging that delays oxidation in foods.