Effectiveness of feeding different biochars on growth, digestibility, body composition, hematology and mineral status of the Nile tilapia, Oreochromis niloticus

Oreochromis niloticus fingerlings (5.15 ± 0.02 g; n = 315) were fed with different types of biochar (BC)-supplemented sunflower meal-based (SFM) diet to investigate the effects of various BC inclusions on their nutritional digestibility, body composition, hematology and mineral status for 60 days. Seven different diets were formulated based on the SFM based diet: one was a control (TD-I, CON) and the other six diets were supplemented with 2% BC derived from different sources. These BCs were derived from the following: cotton stick (CSBC, TD-II), wheat straw (WSBC, TD-III), corn cob (CCBC, TD-IV), house waste (HWBC, TD-V), grass waste (GWBC, TD-VI), and green waste (GwBC, TD-VII) biochar. There were three replicates for each test diet. Each tank had fifteen tilapia fingerlings, and they were fed with 5% of their live wet weight and twice daily. The outcomes showed that the supplementation of CCBC significantly elevated the growth, nutrient absorption, and body composition of the O. niloticus fingerlings (p < 0.05); with concomitant lowering of the quantity of nutrients released into the water bodies whereas HWBC gave negative impacts. The maximal mineral absorption efficiency (Ca, Na, K, Cu, Fe, P, and Zn) was achieved by the supplementation of 2% CCBC. All hematological parameters showed positive improvements (p < 0.05) with CCBC. Interestingly, CCBC significantly improved the growth, digestibility, body composition, hematology, and mineral status of O. niloticus.

Substitution of fishmeal: Highlights of potential plant protein sources for aquaculture sustainability

High protein content, excellent amino acid profile, absence of anti-nutritional factors (ANFs), high digestibility and good palatability of fishmeal (FM), make it a major source of protein in aquaculture. Naturally derived FM is at risk due to an increase in its demand, unsustainable practices, and price. Thus, there is an urgent need to find affordable and suitable protein sources to replace FM. Plant protein sources are suitable due to their widespread availability and low cost. However, they contained certain ANFs, deficiency of some amino acids, low nutrient bioavailability and poor digestibility due to presence of starch and fiber. These unfavourable characteristics make them less suitable for feed as compared to FM. Thus, these potential challenges and limitations associated with various plant proteins have to be overcome by using different methods, i.e. enzymatic pretreatments, solvent extraction, heat treatments and fermentation, that are discussed briefly in this review. This review assessed the impacts of plant products on growth performance, body composition, flesh quality, changes in metabolic activities and immune response of fishes. To minimize the negative effects and to enhance nutritional value of plant products, beneficial functional additives such as citric acid, phytase and probiotics could be incorporated into the plant-based FM. Interestingly, these additives improve growth of fishes by increasing digestibility and nutrient utilization of plant based feeds. Overall, this review demonstrated that the substitution of fishmeal by plant protein sources is a plausible, technically-viable and practical option for sustainable aquaculture feed production.

Impact of thermal and nonthermal process intensification techniques on yield and quality of virgin coconut oil

Virgin coconut oil (VCO) is valued for its nutraceutical potential. The focus of this research was to assess the effect of selected thermal and nonthermal pre-treatments on the yield and quality of subsequently wet-extracted VCO. The fresh coconut cream was subjected to microwave heating (450 W, 2 min), ohmic heating (180 V, 5 min), ultrasonication (350 W, 10 min), or a pulsed electric field (40 kV cm-1, 12.32 min). The thick cream was separated, and VCO was obtained after a freeze-thaw process. The highest VCO yields (>93%) were observed in the cases of ultrasonicated and pulsed electric field-treated samples. A range of oil quality parameters, total phenolic content, and antioxidants were evaluated. Further, the fatty acid composition of all oils was studied. Observations from this research indicate that ultrasonication pre-treatment resulted in the best VCO yield and quality.

Pumpkin seed oil: a comprehensive review of extraction methods, nutritional constituents, and health benefits

Pumpkin seed oil (PSO), a rich source of nutrients, is extracted from the seeds of different pumpkin varieties for food and medicines. This article aims to provide an evidence-based review of the literature and to explore the extraction technologies, nutritional properties, and biological activity of PSO. From previous literature, PSO contains a large proportion of unsaturated fatty acids, with linoleic acid as the main component, and an amount of tocopherol, phytosterol, and phenolic acids. Some differences in the yield, composition, and physicochemical properties of PSO can be associated with the pumpkin's cultivars and the extraction methods. Some novel technologies involved in supercritical fluid extraction, enzyme-assisted aqueous extraction, and ultrasound-assisted extraction have been replacing the conventional technologies gradually as promising methods for the safe, non-polluting, and effective recovery of PSO. This healthy vegetable oil was reported by several in vitro and in vivo studies to have potential protective roles in oxidative stress, inflammation, cancer, and cardiovascular diseases. © 2023 Society of Chemical Industry.

Production of secondary metabolites using tissue culture-based biotechnological applications

Plants are the sources of many bioactive secondary metabolites which are present in plant organs including leaves, stems, roots, and flowers. Although they provide advantages to the plants in many cases, they are not necessary for metabolisms related to growth, development, and reproduction. They are specific to plant species and are precursor substances, which can be modified for generations of various compounds in different plant species. Secondary metabolites are used in many industries, including dye, food processing and cosmetic industries, and in agricultural control as well as being used as pharmaceutical raw materials by humans. For this reason, the demand is high; therefore, they are needed to be obtained in large volumes and the large productions can be achieved using biotechnological methods in addition to production, being done with classical methods. For this, plant biotechnology can be put in action through using different methods. The most important of these methods include tissue culture and gene transfer. The genetically modified plants are agriculturally more productive and are commercially more effective and are valuable tools for industrial and medical purposes as well as being the sources of many secondary metabolites of therapeutic importance. With plant tissue culture applications, which are also the first step in obtaining transgenic plants with having desirable characteristics, it is possible to produce specific secondary metabolites in large-scale through using whole plants or using specific tissues of these plants in laboratory conditions. Currently, many studies are going on this subject, and some of them receiving attention are found to be taken place in plant biotechnology and having promising applications. In this work, particularly benefits of secondary metabolites, and their productions through tissue culture-based biotechnological applications are discussed using literature with presence of current studies.

Impact of Ultrasonication on African Oil Bean (Pentaclethra macrophylla Benth) Protein Extraction and Properties

African oil bean (Pentaclethra macrophylla Benth) is an underutilised edible oil seed that could represent a sustainable protein source. In this study, the impact of ultrasonication on the extraction efficiency and properties of protein from African oil bean (AOB) seeds was evaluated. The increase in the duration of extraction favoured the extraction of AOB proteins. This was observed by an increase in extraction yield from 24% to 42% (w/w) when the extraction time was increased from 15 min to 60 min. Desirable properties were observed in extracted AOB proteins; the amino acid profile of protein isolates revealed higher ratios of hydrophobic to hydrophilic amino acids compared to those of the defatted seeds, suggesting alterations in their functional properties. This was also supported by the higher proportion of hydrophobic amino acids and high surface hydrophobicity index value (3813) in AOB protein isolates. The foaming capacity of AOB proteins was above 200%, with an average foaming stability of 92%. The results indicate that AOB protein isolates can be considered promising food ingredients and could help stimulate the growth of the food industry in tropical Sub-Saharan regions where AOB seeds thrive.

A review on application of ultrasound and ultrasound assisted technology for seed oil extraction

Oil has extensively been extracted from oil-bearing crops and traded globally as a major food commodity. There is always a huge demand from the fats and oils industries to increase oil yield because of profitability benefits. If extraction is conducted under mild operating conditions to preserve and improve the oil quality, then it would be an added value. Ultrasound that works on the cavitational action helps to fulfil the gap. Ultrasound is gaining tremendous interest as an alternative to replace the current conventional extractions approach because of its multiple benefits. Cavitation generated by ultrasound eases the release of oil from cell matrices, thereby allowing the extraction to be carried out under mild processing conditions. The effect enhances the oil yield whilst preserving the quality of the oil. In ultrasound, green solvents can be used to replace toxic organic solvents. Recent up-to-date approaches utilised a combination of ultrasound with enzyme, microwave and supercritical technology to further enhance the oil extraction. This review highlights a comprehensive work of the impact of ultrasound and ultrasound in combination with other technologies on oil extraction, which emphasises the extraction yield and physicochemical properties of the oil, such as fatty acid composition, oxidative stability with the retention of the lipophilic phytochemicals and iodine, saponification values and colour parameters. Understanding of ultrasonication techniques for oil extraction served to be essential and useful information for the fats and oils scientists from academia and industries to explore the possibility of employing a sustainable and mild approaches for extracting oil from various crops.

Apricot kernel characterization, oil extraction, and its utilization: a review

Apricot (Prunus armeniaca L.) kernels, one of the economical stone fruit kernels, are utilized worldwide for edible, cosmetic, and medicinal purposes. Oil from the apricot kernel is valued by the richness of unsaturated fatty acids, the high proportion of oleic acids, phenols, and tocopherol content. Oil yield with quality from apricot kernel varies with region, variety, and adopted method of oil extraction. This review discusses apricot kernel characterization, different conventional and novel methods of oil extraction, their merits and demerits as reported in the literature. Novel technologies such as microwave-assisted oil extraction, ultrasound-assisted oil extraction, enzyme-assisted oil extraction, and supercritical fluid oil extraction have emerged as the most promising extraction methods that allow efficient oil recovery in very environment-friendly ways. Knowledge of the extraction technique aids in giving higher oil recovery with minimal nutritional losses while retaining the original organoleptic properties.

Graphical abstract

Potential impact of ultrasound, pulsed electric field, high-pressure processing and microfludization against thermal treatments preservation regarding sugarcane juice (Saccharum officinarum)

Sugarcane juice (Saccharum officinarum) is a proven nutritious beverage with high levels of antioxidants, polyphenols, and other beneficial nutrients. It has recently gained consumer interest due to its high nutritional profile and alkaline nature. Still, high polyphenolic and sugar content start the fermentation in juice, resulting in dark coloration. Lately, some novel techniques have been introduced to extend shelf life and improve the nutritional value of sugarcane juice. The introduction of such processing technologies is beneficial over conventional processes and essential for producing chemical-free, high-quality, fresh juices. The synergistic impact of these novel technologies is also advantageous for preserving sugarcane juice. In literature, novel thermal, non-thermal and hurdle technologies have been executed to preserve sugarcane juice. These technologies include high hydrostatic pressure (HHP), ultrasound (US), pulsed electric field (PEF), ultraviolet irradiation (UV), ohmic heating (OH), microwave (MW), microfludization and ozone treatment. This review manifests the impact of novel thermal, non-thermal, and synergistic technologies on sugarcane juice processing and preservation characteristics. Non-thermal techniques have been successfully proved effective and showed better results than novel thermal treatments. Because they reduced microbial load and retained nutritional content, while thermal treatments degraded nutrients and flavor of sugarcane juice. Among non-thermal treatments, HHP is the most efficient technique for the preservation of sugarcane juice while OH is preferable in thermal techniques due to less nutritional loss.

Effect of drying methods on physico-chemical and bioactive compounds of mandarin (citrus reticulata) peel

Mandarin peel, an agro waste has an immense potential for bio utilization. The present study highlights the effect of drying on the physicochemical and biochemical properties of dried mandarin peel. Microwave drying and forced air drying accomplished at three different power levels (180, 360 and 540 W) and temperatures (30, 50 and 70 °C), respectively, while freeze drying was carried out at shelf temperature of –35 °C. The results revealed highest recovery of bioactive compounds from microwave drying at 540 W viz total phenolic (43.61 mg GAE/g), flavonoid (8.08 mg QE/g), tannin (8.73 mg GAE/g), saponin (159.91 mg EE/g−1), as well as, gallic acid antioxidant activity (3.58 mg GAEAC/g) and ferric reducing antioxidant power (50.61 mg TE/g−1). Furthermore, results from HPLC and UV–vis spectroscopy revealed presence of major polyphenols in dried peel. Microwave drying can be concluded as an industrial method for the bio utilization of mandarin peel.

Valorization of Tomato Seed By-Products as a Source of Fatty Acids and Bioactive Compounds by Using Advanced Extraction Techniques

In this work, lipids and bioactive compounds from tomato seed by-products were extracted and compared by using advanced extraction techniques, such as microwave-assisted extraction (MAE) and supercritical fluid extraction (SFE). The influence of different extraction parameters, including extraction temperature (T), time (t) and solvent volume (V) for MAE as well as extraction temperature (T), pressure (P) and flow rate (F) for SFE-CO₂, was evaluated on tomato seed oil (TSO) yield and fatty acids composition using response surface methodology (RSM). Optimum extraction conditions for MAE were 56.2 °C, 29.0 min, and 67.6 mL, whereas conditions of 60.2 °C, 400.0 bar, and 64.6 g min⁻¹ were found for SFE-CO₂. Under these conditions, higher TSO extraction yields were obtained by MAE compared to SFE-CO₂ (25.3 wt% and 16.9 wt%, respectively), while similar fatty acids profiles were found by GC in terms of FAMEs composition: methyl palmitate, methyl stearate, methyl oleate, and methyl linoleate, accounting for around 80 wt% of unsaturated fatty acids. TSO MAE extracts showed high DPPH• radical scavenging activity which was related to the presence of tocopherols; in particular γ-tocopherol, which was found as the dominant homologue (260.3 ± 0.6 mg kg_TS⁻¹) followed by a lower amount of α-tocopherol (6.53 ± 0.12 mg kg_TS⁻¹) by HPLC-DAD. The obtained results suggested that tomato seeds are an interesting source of bioactive compounds with potential use in a wide range of nutritional and food applications, increasing the added value of this by-product, which is currently underexploited.

Extraction of Oils and Phytochemicals from Camellia oleifera Seeds: Trends, Challenges, and Innovations

Camellia seed oil, extracted from the seeds of Camellia oleifera Abel., is popular in South China because of its high nutritive value and unique flavor. Nowadays, the traditional extraction methods of hot pressing extraction (HPE) and solvent extraction (SE) are contentious due to low product quality and high environmental impact. Innovative methods such as supercritical fluid extraction (SCFE) and aqueous extraction (AE) are proposed to overcome the pitfalls of the traditional methods. However, they are often limited to the laboratory or pilot scale due to economic or technical bottlenecks. Optimization of extraction processes indicates the challenges in finding the optimal balance between the yield and quality of oils and phytochemicals, as well as the environmental and economic impacts. This article aims to explore recent advances and innovations related to the extraction of oils and phytochemicals from camellia seeds, and it focuses on the pretreatment and extraction processes, as well as their complex effects on nutritional and sensory qualities. We hope this review will help readers to better understand the trends, challenges, and innovations associated with the camellia industry.

Base oil recovery from waste lubricant oil by polar solvent extraction intensified by ultrasound

This paper proposes a greener approach to the intensification of base oil recovery for truck engines (32,500 km of use) using ethanol, propan-2-ol, 2-methylpropan-1-ol, and butan-1-ol as solvents for the extraction of base oil, combining mechanical stirring (220 rpm) and ultrasound (25 °C, 24 kHz, and 400 W). The results indicated that the recovery yields of the base oil, using the mechanical stirring and ultrasound (MS-US) system, for ethanol, propan-2-ol, 2-methylpropan-1-ol, and butan-1-ol were approximately 3.1, 25.6, 71.6, and 85.5%, respectively. By contrast, the recovery yields using only mechanical stirring were 8.8, 28.9, 58.9, and 76.1%, respectively. The system with pre-extraction could effectively remove Ca (85.3-93.0%), Mg (67.2-82.9%), Na (31.7-62.5%), and Zn (0.0-71.7%). Finally, the results showed a reduction of almost 100% for the concentrations of Al, Cr, Fe, and Mo in the pre-extraction system. The mechanical stirring (5 min) and ultrasound (5 min) system were able to intensify the extraction process using environmentally friendly solvents.

Sonication, a Potential Technique for Extraction of Phytoconstituents: A Systematic Review

Traditional extraction techniques have lost their optimum performance because of rising consumer demand and novel technologies. In this regard, several techniques were developed by humans for the extraction of plant materials from various indigenous sources, which are no longer in use. Many of the techniques are not efficient enough to extract maximum plant material. By this time, evolution in extraction has led to development of various techniques including microfiltration, pulsed electric fields, high pressure, microwave assistance, enzyme assistance, supercritical fluid, subcritical fluid and ultrasonication. These innovations in food processing/extraction are known as “Green Food Processing”. These technologies were basically developed by focusing on three universal parameters: simplicity, energy efficiency and economy. These green technologies are practical in a number of different food sectors, mostly for preservation, inhibition of microorganisms, inactivation of enzymes and extraction of plant material. Like the others, ultrasonication could also be used for the said purposes. The primary objective of this review is to confine the potential use of ultrasonication for extraction of oils, pectin and phytochemicals by reviewing the literature systematically.

A Critical Review on Pulsed Electric Field: A Novel Technology for the Extraction of Phytoconstituents

Different parts of a plant (seeds, fruits, flower, leaves, stem, and roots) contain numerous biologically active compounds called “phytoconstituents” that consist of phenolics, minerals, amino acids, and vitamins. The conventional techniques applied to extract these phytoconstituents have several drawbacks including poor performance, low yields, more solvent use, long processing time, and thermally degrading by-products. In contrast, modern and advanced extraction nonthermal technologies such as pulsed electric field (PEF) assist in easier and efficient identification, characterization, and analysis of bioactive ingredients. Other advantages of PEF include cost-efficacy, less time, and solvent consumption with improved yields. This review covers the applications of PEF to obtain bioactive components, essential oils, proteins, pectin, and other important materials from various parts of the plant. Numerous studies compiled in the current evaluation concluded PEF as the best solution to extract phytoconstituents used in the food and pharmaceutical industries. PEF-assisted extraction leads to a higher yield, utilizes less solvents and energy, and it saves a lot of time compared to traditional extraction methods. PEF extraction design should be safe and efficient enough to prevent the degradation of phytoconstituents and oils.