Biomaterial-based possibilities for managing peri-implantitis

Effects and underlying mechanism of micro-nano-structured zirconia surfaces on biological behaviors of human gingival fibroblasts under inflammatory conditions

Zirconia is one of the most commonly used materials for abutments of dental implants, especially in the anterior region. Soft tissue integration to the zirconia abutment surface remains a challenge. Peri-implant soft tissue integration serves as a physiological barrier, attenuating pathogen penetration and preventing peri‑implant disease. The surface microstructure of zirconia has significant effects on the biological behaviors of human gingival fibroblasts (HGFs), but the effects under inflammatory conditions are still unclear. In this study, we established two micro-nano structures on zirconia surfaces using a femtosecond laser, including microgrooves with widths of 30 µm (G3) and 60 µm (G6) and depths of 5 µm, and nanoparticles inside the microgrooves. Polished surfaces were used as controls. HGFs were seeded onto the three groups of zirconia specimens and stimulated with lipopolysaccharide. The HGFs on micro-nano-structured zirconia surfaces exhibited lower inflammatory responses and higher cell adhesion, proliferation, and migration under inflammatory conditions compared with the polished surfaces. Additionally, the G3 group exhibited lower inflammatory responses and higher cell adhesion and migration than the G6 group. The micro-nano-structured zirconia surface exhibited decreased neutrophil infiltration and increased M2-type macrophage polarization in vivo. To explore the molecular mechanism, RNA sequencing and gene silencing were utilized, which revealed two critical target genes regulated by the G3 group. Overall, we proposed an innovative micro-nano-structured zirconia surface that reduced the in vitro and in vivo inflammatory responses and promoted HGF adhesion, migration, and proliferation under inflammatory conditions, in which TRAFD1 and NLRC5 were the underlying key genes. STATEMENT OF SIGNIFICANCE: Zirconia is one of the most commonly used materials for abutments, especially in the anterior region. The surface microstructure of zirconia has significant effects on the biological behaviors of human gingival fibroblasts (HGFs), but few studies have investigated these effects under inflammatory conditions, and the mechanism remains unclear. In this study, we developed an innovative micro-nano-structured zirconia surface using a femtosecond laser, which reduces the in vitro and in vivo pro-inflammatory responses and promotes HGFs adhesion, migration, and proliferation under inflammatory conditions compared with the polished zirconia surface. The potential underlying mechanism was also investigated. This work has provided some theoretical basis for the micro-nano-structured zirconia surface in potentially reducing the inflammation and enhancing peri‑implant soft-tissue integration under inflammatory conditions.

Development and Application of Reversible and Irreversible Covalent Probes for Human and Mouse Cathepsin-K Activity Detection, Revealing Nuclear Activity

Cathepsin-K (CTSK) is an osteoclast-secreted cysteine protease that efficiently cleaves extracellular matrices and promotes bone homeostasis and remodeling, making it an excellent therapeutic target. Detection of CTSK activity in complex biological samples using tailored tools such as activity-based probes (ABPs) will aid tremendously in drug development. Here, potent and selective CTSK probes are designed and created, comparing irreversible and reversible covalent ABPs with improved recognition components and electrophiles. The newly developed CTSK ABPs precisely detect active CTSK in mouse and human cells and tissues, from diseased and healthy states such as inflamed tooth implants, osteoclasts, and lung samples, indicating changes in CTSK's activity in the pathological samples. These probes are used to study how acidic pH stimulates mature CTSK activation, specifically, its transition from pro-form to mature form. Furthermore, this study reveals for the first time, why intact cells and cell lysate exhibit diverse CTSK activity while having equal levels of mature CTSK enzyme. Interestingly, these tools enabled the discovery of active CTSK in human osteoclast nuclei and in the nucleoli. Altogether, these novel probes are excellent research tools and can be applied in vivo to examine CTSK activity and inhibition in diverse diseases without immunogenicity hazards.

Nano-Based Approaches in Surface Modifications of Dental Implants: A Literature Review

Rehabilitation of fully or partially edentulous patients with dental implants represents one of the most frequently used surgical procedures. The work of Branemark, who observed that a piece of titanium embedded in rabbit bone became firmly attached and difficult to remove, introduced the concept of osseointegration and revolutionized modern dentistry. Since then, an ever-growing need for improved implant materials towards enhanced material-tissue integration has emerged. There is a strong belief that nanoscale materials will produce a superior generation of implants with high efficiency, low cost, and high volume. The aim of this review is to explore the contribution of nanomaterials in implantology. A variety of nanomaterials have been proposed as potential candidates for implant surface customization. They can have inherent antibacterial properties, provide enhanced conditions for osseointegration, or act as reservoirs for biomolecules and drugs. Titania nanotubes alone or in combination with biological agents or drugs are used for enhanced tissue integration in dental implants. Regarding immunomodulation and in order to avoid implant rejection, titania nanotubes, graphene, and biopolymers have successfully been utilized, sometimes loaded with anti-inflammatory agents and extracellular vesicles. Peri-implantitis prevention can be achieved through the inherent antibacterial properties of metal nanoparticles and chitosan or hybrid coatings bearing antibiotic substances. For improved corrosion resistance various materials have been explored. However, even though these modifications have shown promising results, future research is necessary to assess their clinical behavior in humans and proceed to widespread commercialization.

Injectable Platelet-Rich Fibrin and Advanced Platelet-Rich Fibrin Demonstrate Enhanced Anti-Biofilm Effect Compared to Enamel Matrix Derivatives on Decontaminated Titanium Surfaces

BACKGROUND

The search for effective antimicrobial agents to mitigate peri-implant infections remains a crucial aspect of implant dentistry. This study aimed to evaluate and compare the antimicrobial efficacy of i-PRF, A-PRF+, and enamel matrix derivative (EMD) on decontaminated rough and smooth titanium (Ti) discs.

MATERIALS AND METHODS

Rough and smooth Ti discs were coated with multispecies biofilm and thoroughly debrided using a chitosan-bristled brush. Subsequently, i-PRF, A-PRF+, and EMD were applied. Untreated discs served as control. Residual adherent bacteria present on the treated Ti discs were visualized by SEM and quantified using culture technique, and colony-forming units (CFUs) were measured after 48 h and 7 days.

RESULTS

i-PRF demonstrated better antimicrobial effectiveness on both smooth and rough implant surfaces as compared to A-PRF+ and EMD (p < 0.001). In all the experimental groups, smooth Ti discs displayed a greater reduction in microbes compared to rough Ti discs when treated with the biologics. The major reduction in CFU values was determined after seven days.

CONCLUSIONS

i-PRF as a regenerative material may also be suitable for decontaminating implant surfaces, which could influence tissue healing and regenerative outcomes positively.

Poly-3-hydroxybutyrate-silver nanoparticles membranes as advanced antibiofilm strategies for combatting peri-implantitis

Dental implant success is threatened by peri-implantitis, an inflammation leading to implant failure. Conventional treatments struggle with the intricate microbial and host factors involved. Antibacterial membranes, acting as barriers and delivering antimicrobials, may offer a promising solution. Thus, this study highlights the potential of developing antibacterial membranes of poly-3-hydroxybutyrate and silver nanoparticles (Ag Nps) to address peri-implantitis challenges, discussing design and efficacy against potential pathogens. Electrospun membranes composed of PHB microfibers and Ag Nps were synthesized in a blend of DMF/chloroform at three different concentrations. Various studies were conducted on the characterization and antimicrobial activity of the membranes. The synthesized Ag Nps ranged from 4 to 8 nm in size. Furthermore, Young's modulus decreased, reducing from 13.308 MPa in PHB membranes without Ag Nps to 0.983 MPa in PHB membranes containing higher concentrations of Ag Nps. This demonstrates that adding Ag Nps results in a less stiff membrane. An increase in elongation at break was noted with the rise in Ag Nps concentration, from 23.597 % in PHB membranes to 60.136 % in PHB membranes loaded with Ag Nps. The antibiotic and antibiofilm activity of the membranes were evaluated against Pseudomonas aeruginosa, Staphylococcus aureus, Streptococcus mutans, and Candida albicans. The results indicated that all PHB membranes containing Ag Nps exhibited potent antibacterial activity by inhibiting the growth of biofilms and planktonic bacteria. However, inhibition of C. albicans occurred only with the PHB-Ag Nps C membrane. These findings emphasize the versatility and potential of Ag Nps-incorporated membranes as a multifunctional approach for preventing and addressing microbial infections associated with peri-implantitis. The combination of antibacterial and antibiofilm properties in these membranes holds promise for improving the management and treatment of peri-implantitis-related complications.

Minocycline hydrochloride plus metronidazole versus metronidazole alone for peri-implantitis: a comparative study

OBJECTIVE

To evaluate the efficacy of minocycline hydrochloride combined with metronidazole versus metronidazole alone in treating peri-implantitis and their impact on specific inflammatory markers.

METHODS

A retrospective review was undertaken of 107 patients with peri-implantitis from January 2018 to January 2021. Patients were treated either with metronidazole alone (Con group, n = 57) or with additional minocycline hydrochloride (Exp group, n = 50). Inflammatory markers, including interleukin-6 (IL-6), interleukin-1 beta (IL-1β), tumor necrosis factor alpha (TNF-α), and matrix metalloproteinase-8 (MMP-8) were determined before and after treatment. Clinical outcomes were determined using the plaque index (PLI), gingival sulcus bleeding index (SBI), and periodontal probing depth (PD). Furthermore, receiver operator characteristic (ROC) curves analyzed the clinical relevance of the markers. Logistic regression was conducted to analyze the risk factors affecting efficacy in patients.

RESULTS

The Exp group exhibited more favorable clinical outcomes and showed lower levels of IL-6, IL-1β, TNF-α, and MMP-8 than the Con group. IL-1β, TNF-α, and MMP-8 levels were significantly correlated with treatment success (P < 0.05), but IL-6 was not (P > 0.05). The ROC curves for IL-1β and TNF-α significantly outperformed those for IL-6 and MMP-8 (P < 0.05). Logistic regression analysis showed that only IL-1β and TNF-α were independent risk factors affecting efficacy in patients.

CONCLUSION

Combining minocycline hydrochloride with metronidazole yields better outcomes for peri-implantitis compared to metronidazole alone. Of the factors analyzed, only IL-1β and TNF-α emerged as dependable independent efficacy indicators.

Effects of autoclaving and disinfection on 3D surgical guides using LCD technology for dental implant

BACKGROUND

Surgical guides can improve the precision of implant placement and minimize procedural errors and their related complications. This study aims to determine how different disinfection and sterilization methods affect the size changes of drill guide templates and the mechanical properties of 3D-printed surgical guides made with LCD technology.

METHODS

We produced a total of 100 samples. Forty surgical guides were fabricated to assess the implant drill guides' surface and geometric properties. We subjected sixty samples to mechanical tests to analyze their tensile, flexural, and compressive properties. We classified the samples into four groups based on each analytical method: GC, which served as the control group; GA, which underwent autoclave sterilization at 121 °C (+ 1 bar, 20 min); GB, which underwent autoclave sterilization at 134 °C (+ 2 bar, 10 min); and GL, which underwent disinfection with 70% isopropyl alcohol for 20 min.

RESULT

The results show that sterilization at 121 °C and 134 °C affects the mechanical and geometric characteristics of the surgical guides, while disinfection with 70% isopropyl alcohol gives better results.

CONCLUSION

Our study of 3D-printed surgical guides using LCD technology found that sterilization at high temperatures affects the guides' mechanical and geometric properties. Instead, disinfection with 70% isopropyl alcohol is recommended.

Association analysis between CD14 gene polymorphisms and peri-implantitis susceptibility in a Chinese population

OBJECTIVE

The goal of the study was to examine the genetic correlation of cluster of differentiation 14 (CD14) gene polymorphisms with peri-implantitis (PI) predisposition in a Chinese Han population.

METHODS

In the case-control study, blood samples were collected from PI patients and healthy individuals (n = 120/group), who were admitted to the Affiliated Hospital of Yangzhou University from 2021 to 2023. One-way analysis of variance (ANOVA) was applied to compare differences of continuous variables among different groups. Genotype and allele distributions of CD14 gene rs2569190 and rs2915863 polymorphisms were analyzed between groups via χ2 test.

RESULTS

A high percentage of rs2569190 GG genotype or G allele carriers were identified in PI group compared with control group (p < .01). Rs2569190 GG genotype carriers had high risk to develop PI (odds ratio: 2.545, 95% confidence interval: 1.257-5.156, p = .009). The rs2569190 AA genotype carriers had the lowest values of gingival index, plaque index, calculus index, peri-implant pocket depth, and clinical attachment level, which were the highest in cases with GG genotype.

CONCLUSION

Rs2569190 polymorphism of CD14 gene was significantly associated with PI predisposition in the Chinese Han population, and the GG genotype and G allele were risk factors for the development of PI.

Enhanced osteogenic and antibacterial properties of titanium implant surface modified with Zn-incorporated nanowires: Preclinical in vitro and in vivo investigations

OBJECTIVE

This study aimed to synthesize zinc-incorporated nanowires structure modified titanium implant surface (Zn-NW-Ti) and explore its superior osteogenic and antibacterial properties in vitro and in vivo.

MATERIALS AND METHODS

Zn-NW-Ti was synthesized via displacement reactions between zinc sulfate solutions and the titanium (Ti) surface, which was pretreated by hydrofluoric acid etching and hyperthermal alkalinization. The physicochemical properties of the Zn-NW-Ti surface were examined. Moreover, the biological effects of Zn-NW-Ti on MC3T3-E1 cells and its antibacterial property against oral pathogenic bacteria (Staphylococcus aureus, Porphyromonas gingivalis, and Actinobacillus actinomycetemcomitans) compared with sandblasted and acid-etched Ti (SLA-Ti) and nanowires modified Ti (NW-Ti) surface were assessed. Zn-NW-Ti and SLA-Ti modified implants were inserted into the anterior extraction socket of the rabbit mandible with or without exposure to the mixed bacterial solution (S. aureus, P. gingivalis, and A. actinomycetemcomitans) to investigate the osteointegration and antibacterial performance via radiographic and histomorphometric analysis.

RESULTS

The Zn-NW-Ti surface was successfully prepared. The resultant titanium surface appeared as a nanowires structure with hydrophilicity, from which zinc ions were released in an effective concentration range. The Zn-NW-Ti surface performed better in facilitating the adhesion, proliferation, and differentiation of MC3T3-E1 cells while inhibiting the colonization of bacteria compared with SLA-Ti and NW-Ti surface. The Zn-NW-Ti implant exhibited enhanced osseointegration in vivo, which was attributed to increased osteogenic activity and reduced bacterial-induced inflammation compared with the SLA-Ti implant.

CONCLUSIONS

The Zn-incorporated nanowires structure modified titanium implant surface exhibited improvements in osteogenic and antibacterial properties, which optimized osteointegration in comparison with SLA titanium implant surface.

Evaluation of Osteoconductive and Antimicrobial Properties of Novel Graphene on Dental Implants: An In Vitro Study

Introduction Graphene oxide (GO) has emerged as a promising material in dentistry, leveraging its exceptional properties. This study evaluates the physicochemical attributes of GO and elucidates its derived biological properties. These encompass biocompatibility, antibacterial efficacy, as well as its influence on osteogenic and odontogenic differentiation processes. Understanding the intricate interplay between the physicochemical and biological aspects of GO provides valuable insights into its potential applications in various dental contexts. Materials and methods The study group (so; titanium discs surface coated with GO) and the control group (co; plain/uncoated machined titanium discs) were divided based on cell attachment and cell proliferation assays (n=60). These groups were further divided into subgroups (n=30) based on the tested time intervals, specifically 24 hours, 48 hours, and 72 hours. The study and controlgroups were further subdivided into three subgroups (n=10) based on the microorganisms tested i.e Porphyromonas gingivalis, Prevotella intermedia and Fusobacteria nucleatum. Results The results of this in vitro study suggest that GO-coated titanium dental implants have both increased osteogenic potential and antimicrobial efficacy. Graphene has good potential as a promising alternative to traditional surface treatments, and a graphene-coated implant can be used for enhanced osseointegration.  Conclusion The osteogenic potential and the cell attachment were higher on titanium surfaces coated with GO nanoparticles when compared to plain titanium discs at 24, 48 and 72 hours respectively.

How Can Imbalance in Oral Microbiota and Immune Response Lead to Dental Implant Problems?

Dental implantology is one of the most dynamically developing fields of dentistry, which, despite developing clinical knowledge and new technologies, is still associated with many complications that may lead to the loss of the implant or the development of the disease, including peri-implantitis. One of the reasons for this condition may be the fact that dental implants cannot yield a proper osseointegration process due to the development of oral microbiota dysbiosis and the accompanying inflammation caused by immunological imbalance. This study aims to present current knowledge as to the impact of oral microflora dysbiosis and deregulation of the immune system on the course of failures observed in dental implantology. Evidence points to a strong correlation between these biological disturbances and implant complications, often stemming from improper osseointegration, pathogenic biofilms on implants, as well as an exacerbated inflammatory response. Technological enhancements in implant design may mitigate pathogen colonization and inflammation, underscoring implant success rates.

Reprogramming mitochondrial metabolism of macrophages by miRNA-released microporous coatings to prevent peri-implantitis

Although various new biomaterials have enriched the methods for peri-implant inflammation treatment, their efficacy is still debated, and secondary operations on the implant area have also caused pain for patients. Recently, strategies that regulate macrophage polarization to prevent or even treat peri-implantitis have attracted increasing attention. Here, we prepared a laser-drilled and covered with metal organic framework-miR-27a agomir nanomembrane (L-MOF-agomir) implant, which could load and sustain the release of miR-27a agomir. In vitro, the L-MOF-agomir titanium plate promoted the repolarization of LPS-stimulated macrophages from M1 to M2, and the macrophage culture supernatant promoted BMSCs osteogenesis. In a ligation-induced rat peri-implantitis model, the L-MOF-agomir implants featured strong immunomodulatory activity of macrophage polarization and alleviated ligation-induced bone resorption. The mechanism of repolarization function may be that the L-MOF-agomir implants promote the macrophage mitochondrial function and metabolism reprogramming from glycolysis to oxidative phosphorylation. Our study demonstrates the feasibility of targeting cell metabolism to regulate macrophage immunity for peri-implantitis inhibition and provides a new perspective for the development of novel multifunctional implants.

Phytochemical, antioxidant, and antibacterial activity of Moringa oleifera nanosuspension against peri-implantitis bacteria: An in vitro study

Objective

the Moringa oleifera leaf (MO) has active compounds that may be beneficial for peri-implantitis therapy. This research aims to analyze the phytochemical, antioxidant, and antibacterial properties of Moringa oleifera L. nanosuspension (MON) extract in peri-implantitis-related bacteria.

Methods

MON extract phytochemical analysis was conducted to examine active compounds such as flavonoids, saponins, quinones, alkaloids, tannins, terpenoids, and steroids. The 2,2-diphenyl-1-picrylhydrazyl (DPPH) assay for antioxidant capacity was evaluated, and gas chromatography-mass spectrometry for the detection of volatile active compounds in MON extract was performed. Turax was used to create MON extract at concentrations of 1% and 2%, and then a particle size analysis was carried out. Prevotella intermedia (Pi), Porphyromonas gingivalis (Pg), Aggregatibacter actinomycetemcomitans (Aa), and Fusobacterium nucleatum (Fn) were tested for antibacterial activity of MON extract, comparing them with doxycycline as the reference drug and using the minimal inhibitory concentration (MIC), minimal bactericidal concentration (MBC), and diffusion zone methods.

Results

MON extract has lower antioxidant capacity than vitamin C. Flavonoids, saponins, quinones, alkaloids, tannins, terpenoids, and steroids were found in MON extract. 1% and 2% of MON extract has 10-40 d nm particle size. MIC, MBC and diffusion examination of 1% and 2% MON extract on Aa, Pg, Pi, and Fn were seen at concentrations of 25% and 12.5% with significantly different (p < 0.05) in vitro.

Conclusion

MON extract has potential antioxidant activity, and 1% or 2% of MON extract has antibacterial properties toward Aa, Pg, Pi, and Fn at concentrations of 25% and 12.5%, with significant differences.

Efficient titanium surface modified using bifunctional chimeric peptides to prevent biofilm formation by multiple microorganisms

It is still a challenge to prevent the formation of bacterial biofilms on the surfaces of oral implants. A chemical peptide with binding and antibacterial properties may be a promising agent if used to modify titanium (Ti) surfaces to inhibit biofilm formation. In this study, peptides were designed by linking the antimicrobial sequence derived from human β-defensin-3 (hBD-3) to the Ti-binding peptide-1 (TBP-1) sequence by using a triple glycine (G) linker. The antimicrobial activity and biocompatibility characteristics of the chemical-peptide-modified Ti surface were then evaluated and the potential antibacterial mechanism was investigated. This study demonstrated that the chemical-peptide-modified surface exhibited satisfactory bactericidal activities against Streptococcus gordonii, Fusobacterium nucleatum, and Porphyromonas gingivalis. In addition to its potent bacteria-killing efficacy, the surface-immobilised chemical peptide also demonstrated excellent biocompatibility to L929 cells. Moreover, the disruption of the integrity of the bacterial membrane partially revealed the antibacterial mechanism of the peptide. This study demonstrated the potential of chemical-peptide-modified Ti surfaces for preventing the occurrence of peri-implant diseases, thereby providing a promising approach to improving the survival rate of oral implants.

Micro-CT analysis and mechanical properties of low dimensional CFR-PEEK specimens additively manufactured by material extrusion

Material extrusion of thermoplastic polymers enables the realization of complex specific designs with high performance composites. The present study aims at evaluating the mechanical properties of carbon fiber-reinforced semi-crystalline thermoplastic polymer polyether ether ketone (CFR-PEEK) manufactured by material extrusion and correlating them with results obtained by micro-CT. Samples in the shape of small bars were provided by Kumovis (Munich, Germany). The determination of surface roughness and density was followed by three-point bending tests. To reveal the pore distribution as well as the fusion quality of CFR PEEK when applied with external forces, micro-CT scans were performed with an X-ray microscope before and after the mechanical test to localize the sites where the fracture is generated. The density of CFR-PEEK bars indicated that they had superior mechanical properties compared with our previous study on unfilled 3D printed PEEK (bending modulus: (5.4 ± 0.5) GPa vs. (1.05 ± 0.05) GPa to (1.48 ± 0.10) GPa; bending strength: (167 ± 11) MPa vs. (51 ± 15) to (193 ± 7) MPa). Micro-CT analyses revealed the local 3D-distribution of voids. Voids of 30 μm diameter are nearly spherical and make up the main part of the total porosity. The larger the voids, the more they deviate from a spherical shape. Significant lack-of-fusion voids are located between the deposited filaments. By growing and merging, they act as seeds for the forming fracture line in the region of the flexural specimens where the maximum local tensile stresses occurred under bending load. Our work provides a detailed analysis of printed PEEK with fiber additive and relates this with mechanical properties.

The integration of peri-implant soft tissues around zirconia abutments: Challenges and strategies

Stable soft tissue integration around the implant abutment attenuates pathogen penetration, protects underlying bone tissue, prevents peri-implantitis and is essential in maintaining long-term implant stability. The desire for "metal free" and "aesthetic restoration" has favored zirconia over titanium abutments, especially for implant restorations in the anterior region and for patients with thin gingival biotype. Soft tissue attachment to the zirconia abutment surface remains a challenge. A comprehensive review of advances in zirconia surface treatment (micro-design) and structural design (macro-design) affecting soft tissue attachment is presented and strategies and research directions are discussed. Soft tissue models for abutment research are described. Guidelines for development of zirconia abutment surfaces that promote soft tissue integration and evidence-based references to inform clinical choice of abutment structure and postoperative maintenance are presented.

Enhancing the Hydrophobicity and Antibacterial Properties of SiCN-Coated Surfaces with Quaternization to Address Peri-Implantitis

Peri-implantitis is a major cause of dental implant failure. This disease is an inflammation of the tissues surrounding the implant, and, while the cause is multi-factorial, bacteria is the main culprit in initiating an inflammatory reaction. Dental implants with silicon carbonitride (SiCN) coatings have several potential advantages over traditional titanium implants, but their antibacterial efficiency has not yet been evaluated. The purpose of this study was to determine the anti-bacterial potential of SiCN by modifying the surface of SiCN-coated implants to have a positive charge on the nitrogen atoms through the quaternization of the surface atoms. The changes in surface chemistry were confirmed using contact angle measurement and XPS analysis. The modified SiCN surfaces were inoculated with Streptococcus mutans (S. mutans) and compared with a silicon control. The cultured bacterial colonies for the experimental group were 80% less than the control silicon surface. Fluorescent microscopy with live bacteria staining demonstrated significantly reduced bacterial coverage after 3 and 7 days of incubation. Scanning electron microscopy (SEM) was used to visualize the coated surfaces after bacterial inoculation, and the mechanism for the antibacterial properties of the quaternized SiCN was confirmed by observing ruptured bacteria membrane along the surface.

Substrate stiffness can affect the crosstalk between adipose derived mesenchymal stem cells and macrophages in bone tissue engineering

Purpose: This study aimed to explore the effect of biomaterials with different stiffness on Adipose Derived Mesenchymal Stem Cells (ADSC)-macrophage crosstalk in bone tissue engineering and its role in bone repair. Methods: Biomaterials with Young's modulus of 64 and 0.2 kPa were selected, and the crosstalk between ADSCs and macrophages was investigated by means of conditioned medium treatment and cell co-culture, respectively. Polymerase chain reaction (PCR) and flow cytometry were used to evaluate the polarization of macrophages. Alkaline phosphatase (ALP) and alizarin red staining (ARS) solutions were used to evaluate the osteogenic differentiation of ADSCs. Transwell assay was used to evaluate the chemotaxis of ADSCs and macrophages. Moreover, mass spectrometry proteomics was used to analyze the secreted protein profile of ADSCs of different substrates and macrophages in different polarization states. Results: On exploring the influence of biomaterials on macrophages from ADSCs on different substrates, we found that CD163 and CD206 expression levels in macrophages were significantly higher in the 64-kPa group than in the 0.2-kPa group in conditioned medium treatment and cell co-culture. Flow cytometry showed that more cells became CD163+ or CD206+ cells in the 64-kPa group under conditioned medium treatment or cell co-culture. The Transwell assay showed that more macrophages migrated to the lower chamber in the 64-kPa group. The proteomic analysis found that ADSCs in the 64-kPa group secreted more immunomodulatory proteins, such as LBP and RBP4, to improve the repair microenvironment. On exploring the influence of biomaterials on ADSCs from macrophages in different polarization states, we found that ALP and ARS levels in ADSCs were significantly higher in the M2 group than in the other three groups (NC, M0, and M1 groups) in both conditioned medium treatment and cell co-culture. The Transwell assay showed that more ADSCs migrated to the lower chamber in the M2 group. The proteomic analysis found that M2 macrophages secreted more extracellular remodeling proteins, such as LRP1, to promote bone repair. Conclusion: In bone tissue engineering, the stiffness of repair biomaterials can affect the crosstalk between ADSCs and macrophages, thereby regulating local repair immunity and affecting bone repair.

Synthesis of Biocompatible Silver-Doped Carbonate Hydroxyapatite Nanoparticles Using Microwave-Assisted Precipitation and In Vitro Studies for the Prevention of Peri-Implantitis

A carbonate-hydroxyapatite-based antibacterial implant material with low cytotoxicity was synthesized. The silver ion (Ag⁺) was incorporated into CHA material, resulting in silver-doped carbonate hydroxyapatite (CHA-Ag). The microwave-assisted precipitation method was used to synthesize the CHA-Ag material. The amount of Ag⁺ was varied at 0.005, 0.010, and 0.015 mol fractions (χAg). The XRD results showed that the diffractograms corresponded with hydroxyapatite (ICSD 98-05-1414), without any additional phase. The presence of carbonate ions was indicated by vibrations at wavenumber of 871, 1411, and 1466 cm^-1 in the infrared spectra. The CHA-Ag materials were agglomerates of nanosized particles with low crystallinity. The particle size and crystallinity of the materials decreased due to the incorporation of CO₃^2- and Ag⁺. The incorporated Ag⁺ successfully inhibited peri-implant-associated bacterial growth. The antibacterial ability increased alongside the increase in the Ag⁺ amount. The pre-osteoblast MC3T3E1 cell could grow up to >70% in the MTT assay, despite the use of Ag⁺ as a dopant. The cell viability was higher in the CHA-Ag-containing media than in the CHA-containing media. The MTT assay also revealed that the CHA-Ag cytotoxicity decreased even though the Ag⁺ amount increased. The CHA-Ag-15 had the lowest cytotoxicity and highest antibacterial activity. Therefore, the optimal amount of Ag⁺ in the CHA-Ag formulation was χAg = 0.015.

Osteoinductive Electrospun Scaffold Based on PCL-Col as a Regenerative Therapy for Peri-Implantitis

Peri-implantitis is a serious condition affecting dental implants that can lead to implant failure and loss of osteointegration if is not diagnosed and treated promptly. Therefore, the development of new materials and approaches to treat this condition is of great interest. In this study, we aimed to develop an electrospun scaffold composed of polycaprolactone (PCL) microfibers loaded with cholecalciferol (Col), which has been shown to promote bone tissue regeneration. The physical and chemical properties of the scaffold were characterized, and its ability to support the attachment and proliferation of MG-63 osteoblast-like cells was evaluated. Our results showed that the electrospun PCL-Col scaffold had a highly porous structure and good mechanical properties. The resulting scaffolds had an average fiber diameter of 2-9 μm and high elongation at break (near six-fold under dry conditions) and elasticity (Young modulus between 0.9 and 9 MPa under dry conditions). Furthermore, the Col-loaded scaffold was found to decrease cell proliferation when the Col content in the scaffolds increased. However, cytotoxicity analysis proved that the PCL scaffold on its own releases more lactate dehydrogenase into the medium than the scaffold containing Col at lower concentrations (PCL-Col A, PCL-Col B, and PCL-Col C). Additionally, the Col-loaded scaffold was shown to effectively promote the expression of alkaline phosphatase and additionally increase the calcium fixation in MG-63 cells. Our findings suggest that the electrospun membrane loaded with Col can potentially treat peri-implantitis by promoting bone formation. However, further studies are needed to assess the efficacy and safety of this membrane in vivo.

Surface Coatings of Dental Implants: A Review

Replacement of missing teeth is possible using biocompatible devices such as endosseous implants. This study aims to analyze and recognize the best characteristics of different implant surfaces that ensure good peri-implant tissue healing and thus clinical success over time. The present review was performed on the recent literature concerning endosseous implants made of titanium, a material most frequently used because of its mechanical, physical, and chemical characteristics. Thanks to its low bioactivity, titanium exhibits slow osseointegration. Implant surfaces are treated so that cells do not reject the surface as a foreign material and accept it as fully biocompatible. Analysis of different types of implant surface coatings was performed in order to identify ideal surfaces that improve osseointegration, epithelial attachment to the implant site, and overall peri-implant health. This study shows that the implant surface, with different adhesion, proliferation, and spreading capabilities of osteoblastic and epithelial cells, influences the cells involved in anchorage. Implant surfaces must have antibacterial capabilities to prevent peri-implant disease. Research still needs to improve implant material to minimize clinical failure.

Osteogenic and long-term antibacterial properties of Sr/Ag-containing TiO2 microporous coating in vitro and in vivo

Bacterial infection and poor osseointegration are two critical issues that need to be solved for long-term use of titanium implants. As such, Sr/Ag-containing TiO₂ microporous coatings were prepared on a Ti alloy surface in the current study via a single-step microarc oxidation technique. The coatings showed both good cytocompatibility in vitro and biosafety in vivo. Sr/Ag incorporation brought no significant change in the surface micromorphology and physicochemical properties, but endowed the coating with strong osteogenic activity and long-term antibacterial capability in vitro. Furthermore, the osteogenic and antibacterial capability of the coating was also confirmed in vivo. In a rat osseointegration model, new bone formation, implant-bone contact, removal torque and bone mineralization were all significantly increased in the M-Sr/Ag group when compared with those in group M, although they were slightly lower than those in group M-Sr. In a periimplantitis model, no rats suffered infection in the M-Sr/Ag group after 3 months of osseointegration and 5 weeks of bacterial inoculation period, when compared to 100% and 75% infection rates in M and M-Sr groups, respectively. In addition, active bone remodeling and many mesenchymal cells were observed in the M-Sr group, suggesting good bone regeneration potential in Sr-containing coatings in the case of controlled periimplantitis. Overall, the Sr/Ag-containing TiO₂ microporous coating is valuable for preventing periimplantitis and improving implant reosseointegration, and is therefore promising for long-term and high quality use of titanium implants.

Cell-Molecular Interactions of Nano- and Microparticles in Dental Implantology

The role of metallic nano- and microparticles in the development of inflammation has not yet been investigated. Soft tissue biopsy specimens of the bone bed taken during surgical revisions, as well as supernatants obtained from the surface of the orthopedic structures and dental implants (control), were examined. Investigations were performed using X-ray microtomography, X-ray fluorescence analysis, and scanning electron microscopy. Histological studies of the bone bed tissues were performed. Nanoscale and microscale metallic particles were identified as participants in the inflammatory process in tissues. Supernatants containing nanoscale particles were obtained from the surfaces of 20 units of new dental implants. Early and late apoptosis and necrosis of immunocompetent cells after co-culture and induction by lipopolysaccharide and human venous blood serum were studied in an experiment with staging on the THP-1 (human monocytic) cell line using visualizing cytometry. As a result, it was found that nano- and microparticles emitted from the surface of the oxide layer of medical devices impregnated soft tissue biopsy specimens. By using different methods to analyze the cell-molecule interactions of nano- and microparticles both from a clinical perspective and an experimental research perspective, the possibility of forming a chronic immunopathological endogenous inflammatory process with an autoimmune component in the tissues was revealed.

The race for the optimal antimicrobial surface: perspectives and challenges related to plasma electrolytic oxidation coating for titanium-based implants

Plasma electrolytic oxidation (PEO) is a low-cost, structurally reliable, and environmentally friendly surface modification method for orthopedic and dental implants. This technique is successful for the formation of porous, corrosion-resistant, and bioactive coatings, besides introducing antimicrobial compounds easily. Given the increase in implant-related infections, antimicrobial PEO-treated surfaces have been widely proposed to surmount this public health concern. This review comprehensively discusses antimicrobial implant surfaces currently produced by PEO in terms of their in vitro and in vivo microbiological and biological properties. We present a critical [part I] and evidence-based [part II] review about the plethora of antimicrobial PEO-treated surfaces. The mechanism of microbial accumulation on implanted devices and the principles of PEO technology to ensure antimicrobial functionalization by one- or multi-step processes are outlined. Our systematic literature search showed that particular focus has been placed on the metallic and semi-metallic elements incorporated into PEO surfaces to facilitate antimicrobial properties, which are often dose-dependent, without leading to cytotoxicity in vitro. Meanwhile, there are concerns over the biocompatibility of PEO and its long-term antimicrobial effects in animal models. We clearly highlight the importance of using clinically relevant infection models and in vivo long-term assessments to guarantee the rational design of antimicrobial PEO-treated surfaces to identify the 'finish line' in the race for antimicrobial implant surfaces.

Metabolic Conditions and Peri-Implantitis

Dental implants to replace lost teeth are a common dentistry practice nowadays. Titanium dental implants display a high success rate and improved safety profile. Nevertheless, there is an increasing peri-implantitis (PI), an inflammatory disease associated with polymicrobial infection that adversely affects the hard and soft tissues around the implant. The present review highlights the contribution of different metabolic conditions to PI. The considerations of both local and systemic metabolic conditions are crucial for planning successful dental implant procedures and during the treatment course of PI. Un- or undertreated PI can lead to permanent jaw bone suffering and dental implant losses. The common mediators of PI are inflammation and oxidative stress, which are also the key mediators of most systemic metabolic disorders. Chronic periodontitis, low-grade tissue inflammation, and increased oxidative stress raise the incidence of PI and the underlying systemic metabolic conditions, such as obesity, diabetes mellitus, or harmful lifestyle factors (cigarette smoking, etc.). Using dental biomaterials with antimicrobial effects could partly solve the problem of pathogenic microbial contamination and local inflammation. With local dentistry considering factors, including oral microbiota and implant quality control, the inclusion of the underlying systemic metabolic conditions into the pre-procedure planning and during the treatment course should improve the chances of successful outcomes.

CCK regulates osteogenic differentiation through TNFα/NF-κB in peri-implantitis

OBJECTIVE

Peri-implantitis is characterized by peri-implant mucositis and alveolar bone resorption. This study investigated cholecystokinin (CCK) expression and the mechanism underlying its involvement in peri-implantitis.

METHODS

mRNA sequencing was performed using the Gene Expression Omnibus database GSE106090. Human bone marrow mesenchymal stem cells (hBMSCs) were pretreated with various concentrations of CCK (0, 10, 30, or 100 nM) for 1 hour before induction in osteogenic differentiation medium for 2 weeks. Alkaline phosphatase (ALP) activity was determined, and the cells were stained with alizarin red. The expression levels of TNFα and the osteogenic markers ALP, RUNX2, and OCN were measured using quantitative real-time PCR. TNFα, phosphorylated P65, and total P65 levels were determined by western blot.

RESULTS

Compared with healthy individuals, 262 and 215 genes were up- and down-regulated, respectively, in the periodontal tissues of patients with peri-implantitis. CCK expression was significantly upregulated in patients with peri-implantitis. CCK reduced ALP activity, osteogenic differentiation, and levels of the osteogenic markers ALP, RUNX2, and OCN. Moreover, CCK promoted levels of TNFα and phosphorylated P65, which is a marker of activation for the NF-κB inflammatory pathway.

CONCLUSIONS

CCK regulates osteogenic differentiation through the TNFα/NF-κB axis in peri-implantitis.

A homogeneous dopamine-silver nanocomposite coating: striking a balance between the antibacterial ability and cytocompatibility of dental implants

Silver has been widely used for surface modification to prevent implant-associated infections. However, the inherent cytotoxicity of silver greatly limited the scope of its clinical applications. The construction of surfaces with both good antibacterial properties and favorable cytocompatibility still remains a challenge. In this study, a structurally homogeneous dopamine-silver (DA/Ag) nanocomposite was fabricated on the implant surface to balance the antibacterial activity and cytocompatibility of the implant. The results show that the DA/Ag nanocomposites prepared under the acidic conditions (pH = 4) on the titanium surface are homogeneous with higher Ag⁺ content, while an obvious core (AgNPs)-shell (PDA) structure is formed under neutral (pH = 7) and alkaline conditions (pH = 10), and the subsequent heat treatment enhanced the stability of PDA-AgNPs nanocomposite coatings on porous titanium. The antibacterial test, cytotoxicity test, hypodermic implantation and osteogenesis test revealed that the homogeneous PDA-AgNPs nanocomposite coating achieved the balance between the antibacterial ability and cytocompatibility, and had the best outcomes for soft tissue healing and bone formation around the implants. This study provides a facile strategy for preparing silver-loaded surfaces with both good antibacterial effect and favorable cytocompatibility, which is expected to further improve the therapeutic efficacy of silver composite-coated dental implants.

The application of biomaterials in osteogenesis: A bibliometric and visualized analysis

Osteogenesis serves an important role in bone tissue repairing. Novel biomaterials are widely prevalent as materials for orthopedic implants due to their biocompatibility and osteogenetic ability. The purpose of this study was to comprehensively analyze hotspots and future trend of biomaterials research in osteogenesis based on bibliometric and visualized analysis. A total of 1,523 papers about biomaterials research in osteogenesis between 2000 and 2021 were included in this study. During the above 20 years, China’s leading position in the global biomaterials research in osteogenesis was obvious, and it was also the country that most frequently participates in international cooperation. Chinese Academy of Sciences was the most productive institution and the leader of research cooperation. Acta Biomaterialia and Biomaterials have published the largest number of articles in the field of biomaterials research in osteogenesis. Meanwhile, Acta Biomaterialia and Biomaterials were also the two journals with the highest total citation frequency. Wu CT, Chang J, Kaplan DL, and Xiao Y all made important contributions in the field of biomaterials research in osteogenesis. At present, there are five research hotspots in the field of biomaterials research in osteogenesis: 1) the immunomodulatory role of biomaterial-related inflammatory; 2) mechanisms of osteogenesis in biomaterials; 3) 3D printing and clinical application of biomaterials; 4) bone tissue engineering for biomaterial osteogenesis; and 5) regenerative medicine for biomaterial osteogenesis. The results of this study showed that mechanisms of osteogenesis in biomaterials, bone tissue engineering for biomaterial osteogenesis, and regenerative medicine for biomaterial osteogenesis will remain research hotspots in the future. International cooperation was also expected to expand and deepen the field of biomaterials research in osteogenesis.

pH-responsive cinnamaldehyde-TiO2 nanotube coating: fabrication and functions in a simulated diabetes condition

Current evidence has suggested that diabetes increases the risk of implanting failure, and therefore, appropriate surface modification of dental implants in patients with diabetes is crucial. TiO₂ nanotube (TNT) has an osteogenic nanotopography, and its osteogenic properties can be further improved by loading appropriate drugs. Cinnamaldehyde (CIN) has been proven to have osteogenic, anti-inflammatory, and anti-bacterial effects. We fabricated a pH-responsive cinnamaldehyde-TiO₂ nanotube coating (TNT-CIN) and hypothesized that this coating will exert osteogenic, anti-inflammatory, and anti-bacterial functions in a simulated diabetes condition. TNT-CIN was constructed by anodic oxidation, hydroxylation, silylation, and Schiff base reaction to bind CIN, and its surface characteristics were determined. Conditions of diabetes and diabetes with a concurrent infection were simulated using 22-mM glucose without and with 1-μg/mL lipopolysaccharide, respectively. The viability and osteogenic differentiation of bone marrow mesenchymal stem cells, polarization and secretion of macrophages, and resistance to Porphyromonas gingivalis and Streptococcus mutans were evaluated. CIN was bound to the TNT surface successfully and released better in low pH condition. TNT-CIN showed better osteogenic and anti-inflammatory effects and superior bacterial resistance than TNT in a simulated diabetes condition. These findings indicated that TNT-CIN is a promising, multifunctional surface coating for patients with diabetes needing dental implants. Graphical abstract.

New Ceramic Multi-Unit Dental Abutments with an Antimicrobial Glassy Coating

The choice of suitable materials and new designs in oral implantology and the subsequent enhancement of the characteristics of the dental implant developed is an important research topic with wide scope. The present work aims to develop a new multifunctional zirconia-ceria/alumina (Ce-TZP/Al₂O₃) composite with an antimicrobial glass-based coating to be used in multi-unit abutments compatible with commercially available Ti implants for peri-implantitis prevention. An airbrush spraying technique was effectively applied to coat the sintered ceramic composite starting from a glass powder suspension. This deposition technique was appropriate for obtaining continuous antimicrobial glass-based coatings with homogenous thickness (~35 µm) on ceramic dental implant components. The dental implant systems with the antimicrobial glassy coating were subjected to a mechanical integrity test following ISO 14801 to determine their long-term stability. The tested implant-coating structure seems to be stable under in vitro conditions with ultimate applied forces exceeding the maximum physiological occlusal loading force. This paper also presents a pilot clinical case report that shows peri-implant tissue around the mechanically stable glass coating with no signs of inflammation 1 year after implant insertion. This result is a preliminary probe of the durability and biological tolerance of the glassy material by the gingiva, as well as the antimicrobial effect on the peri-implant microbiota displayed by the coating.

Race for Applicable Antimicrobial Dental Implant Surfaces to Fight Biofilm-Related Disease: Advancing in Laboratorial Studies vs Stagnation in Clinical Application

Across years, potential strategies to fight peri-implantitis have been notoriously explored through the antimicrobial coating implant surfaces capable of interfering with the bacterial adhesion process. However, although experimental studies have significantly advanced, no product has been marketed so far. For science to reach the society, the commercialization of research outcomes is necessary to provide real advancement in the biomedical field. Therefore, the aim of this study was to investigate the challenges involved in the development of antimicrobial dental implant surfaces to fight peri-implantitis, through a systematic search. Research articles reporting antimicrobial dental implant surfaces were identified by searching PubMed, Scopus, Web of Science, The Cochrane Library, Embase, and System of Information on Grey Literature in Europe, between 2008 and 2020. A total of 1778 studies were included for quality assessment and the review. An impressive number of 1655 articles (93,1%) comprised in vitro studies, whereas 123 articles refer to in vivo investigations. From those 123, 102 refer to animal studies and only 21 articles were published on the clinical performance of antibacterial dental implant surfaces. The purpose of animal studies is to test how safe and effective new treatments are before they are tested in people. Therefore, the discrepancy between the number of published studies clearly reveals that preclinical investigations still come up against several challenges to overcome before moving forward to a clinical setting. Additionally, researchers need to recognize that the complex journey from lab to market requires more than a great idea and resources to develop a commercial invention; research teams must possess the skills necessary to commercialize an invention.

Dental Materials for Oral Microbiota Dysbiosis: An Update

The balance or dysbiosis of the microbial community is a major factor in maintaining human health or causing disease. The unique microenvironment of the oral cavity provides optimal conditions for colonization and proliferation of microbiota, regulated through complex biological signaling systems and interactions with the host. Once the oral microbiota is out of balance, microorganisms produce virulence factors and metabolites, which will cause dental caries, periodontal disease, etc. Microbial metabolism and host immune response change the local microenvironment in turn and further promote the excessive proliferation of dominant microbes in dysbiosis. As the product of interdisciplinary development of materials science, stomatology, and biomedical engineering, oral biomaterials are playing an increasingly important role in regulating the balance of the oral microbiome and treating oral diseases. In this perspective, we discuss the mechanisms underlying the pathogenesis of oral microbiota dysbiosis and introduce emerging materials focusing on oral microbiota dysbiosis in recent years, including inorganic materials, organic materials, and some biomolecules. In addition, the limitations of the current study and possible research trends are also summarized. It is hoped that this review can provide reference and enlightenment for subsequent research on effective treatment strategies for diseases related to oral microbiota dysbiosis.

Mesoporous Silk-Bioactive Glass Nanocomposites as Drug Eluting Multifunctional Conformal Coatings for Improving Osseointegration and Bactericidal Properties of Metal Implants

Endowing metal implants with multifunctional traits to prevent implant-associated infections and improve osseointegration has become a pivotal facet in orthopedics and dental fixation. Herein, we report the synthesis of mesoporous 70S bioactive glass-silk fibroin nanocomposites inspired by the biomimetic organo-apatites of mineralized collagen. The mesoporous, biomimetic nanocomposites enabled loading of antibiotics (gentamicin and doxycycline) and favored their release in a rapid manner while preserving their bioactivity. Ease in modification of the mesoporous nanocomposites enabled tailoring of 3-(aminopropyl)-triethoxysilane to the silanol network of bioactive glass, which improved the loading capacity of the hydrophobic drug (dexamethasone). The modification favored the slow and sustained release of dexamethasone from the modified mesoporous nanocomposites, which is desired for mediating osteogenesis and immunomodulation. Conformal coatings of these drug-loaded nanocomposites were materialized on stainless-steel implants through a facile electrophoretic deposition (EPD) technique, wherein the deposition yield can be controlled by applied parameters. Antibiotic coatings exhibited antibacterial efficacy with bioactivity retained up to 28 days, while dexamethasone-loaded coatings favored mesenchymal stem cell adhesion and osteoinduction. The immunomodulatory roles were also ascertained, wherein M2 macrophage biasness was favored in dexamethasone-loaded coatings. The versatility of these mesoporous biomimetic nanocomposites guarantee the loading of scenario-specific drugs to aid their local delivery through the conformal EPD coatings developed over metal implants toward improving implant patency.

Non-surgical peri-implantitis treatment with or without systemic antibiotics; a randomized controlled clinical trial

Objectives

To assess the adjunctive effect of systemic amoxicillin (AMX) and metronidazole (MTZ) in patients receiving non‐surgical treatment (NST) for peri‐implantitis (PI).

Materials and methods

Thirty‐seven patients were randomized into an experimental group treated with NST plus AMX + MTZ (N = 18) and a control group treated with NST alone (N = 19). Clinical parameters were evaluated at 12 weeks post‐treatment. The primary outcome was the change in peri‐implant pocket depth (PIPD) from baseline to 12 weeks, while secondary outcomes included bleeding on probing (BoP), suppuration on probing (SoP), and plaque. Data analysis was performed at patient level (one target site per patient).

Results

All 37 patients completed the study. Both groups showed a significant PIPD reduction after NST. The antibiotics group showed a higher mean reduction in PIPD at 12 weeks, compared with the control group (2.28 ± 1.49 mm vs. 1.47 ± 1.95 mm), however, this difference did not reach statistical significance. There was no significant effect of various potential confounders on PIPD reduction. Neither treatment resulted in significant improvements in BoP at follow‐up; 30 of 37 (81%) target sites still had BoP after treatment. Only two implants, one in each group, exhibited a successful outcome defined as PIPD < 5 mm, and absence of BoP and SoP.

Conclusions

Non‐surgical treatment was able to reduce PIPD at implants with PI. The adjunctive use of systemic AMX and MTZ did not show statistically significant better results compared to NST alone. NST with or without antibiotics was ineffective to completely resolve inflammation around dental implants.

Latest Trends in Surface Modification for Dental Implantology: Innovative Developments and Analytical Applications

An increase in the world population and its life expectancy, as well as the ongoing concern about our physical appearance, have elevated the relevance of dental implantology in recent decades. Engineering strategies to improve the survival rate of dental implants have been widely investigated, focusing on implant material composition, geometry (usually guided to reduce stiffness), and interface surrounding tissues. Although efforts to develop different implant surface modifications are being applied in commercial dental prostheses today, the inclusion of surface coatings has gained special interest, as they can be tailored to efficiently enhance osseointegration, as well as to reduce bacterial-related infection, minimizing peri-implantitis appearance and its associated risks. The use of biomaterials to replace teeth has highlighted the need for the development of reliable analytical methods to assess the therapeutic benefits of implants. This literature review considers the state-of-the-art strategies for surface modification or coating and analytical methodologies for increasing the survival rate for teeth restoration.

Fitting pieces into the puzzle: The impact of titanium-based dental implant surface modifications on bacterial accumulation and polymicrobial infections

Polymicrobial infection is the main cause of dental implant failure. Although numerous studies have reported the ability of titanium (Ti) surface modifications to inhibit microbial adhesion and biofilm accumulation, the majority of solutions for the utilization of Ti antibacterial surfaces have been testedin in vitro and animal models, with only a few developed surfaces progressing into clinical research. Motivated by this huge gap, we critically reviewed the scientific literature on the existing antibacterial Ti surfaces to help understand these surfaces' impact on the "puzzle" of undesirable dental implant-related infections. This manuscript comprises three main sections: (i) a narrative review on topics related to oral biofilm formation, bacterial-implant surface interactions, and on how implant-surface modifications can influence microbial accumulation; (ii) a critical evidence-based review to summarize pre-clinical and clinical studies in an attempt to "fit pieces into the puzzle" to unveil the best way to reduce microbial loads and control polymicrobial infection around dental implants showed by the current in vivo evidence; and (iii) discussion and recommendations for future research testing emerging antibacterial implant surfaces, connecting basic science and the requirements for future clinical translation. The findings of the present review suggest no consensus regarding the best available Ti surface to reduce bacterial colonization on dental implants. Smart release or on-demand activation surface coatings are a "new piece of the puzzle", which may be the most effective alternative for reducing microbial colonization on Ti surfaces, and future studies should focus on these technologies.

Efficacy of local antibiotic therapy in the treatment of peri-implantitis: A systematic review and meta-analysis

OBJECTIVES

The aim of this systematic review and meta-analysis was to state the efficacy of local administration of antibiotics in the treatment of peri-implantitis in terms of peri-implant probing depth (PPD) and bleeding on probing (BoP) reduction.

DATA, SOURCES AND STUDY SELECTION

Electronic and manual literature searches were conducted. Screening process was done using the National Library of Medicine (MEDLINE by PubMed), Embase and the Cochrane Oral Health. Included articles were randomized controlled trials and observational studies. Weighted means were calculated. Heterogeneity was determined using Higgins (I2). Due to the encountered heterogeneity between the studies being combined, random-effects models were applied in order to analyze effect sizes. Twelve studies (365 patients and 463 implants) were included in the systematic review. After peri-implantitis treatment with local antibiotics, PPD was reduced 1.40 mm (95% confidence interval: 0.82-1.98). When local antibiotics were applied, a 0.30 mm higher reduction of PPD was obtained than in the control group (95% confidence interval: 0.07-0.53). BoP attained an odds ratio value of 1.82 (95% confidence interval: 1.09-3.04), indicating that the likehood of bleeding is almost two-fold when antibiotics are not locally administrated. Adverse effects were not found after applying local antibiotics.

CONCLUSIONS

The local antibiotic administration does reduce, without adverse effects, both peri-implant probing depths and bleeding on probing in patients affected by peri-implantitis, if compared to control groups without local antibiotic application.

CLINICAL SIGNIFICANCE

Patients with dental implants frequently suffer from peri-implantitis. Clinical features of peri-implantitis lesions include the presence of bleeding on probing and increased peri-implant probing depths. Both BoP and PPD have become reduced after local administration of antibiotics.

The Role of Biomaterials and Biocompatible Materials in Implant-Supported Dental Prosthesis

The dental implant is one of the appropriate instances of the different dental materials and their application, which is the combined procedure of technology and science in physics, biomechanics, and surface chemistry from macroscale to nanoscale surface engineering and manufactured technologies. In recent decades, biomaterials in implant therapy promote bone response and biomechanical ability, which is long-term from surgical equipment to final prosthetic restoration. Biomaterials have a crucial role in rehabilitating the damaged structure of the tooth and supplying acceptable outcomes correlated with clinical performance. There are some challenges in implantation such as bleeding, mobility, peri-implant infections, and the solution associated with modern strategies which are regarded to biomaterials. Various materials have been known as promising candidates for coatings of dental implants which contain polyhydroxyalkanoates, calcium phosphate, carbon, bisphosphonates, hydroxyapatite, bone stimulating factors, bioactive glass, bioactive ceramics, collagen, chitosan, metal and their alloys, fluoride, and titanium/titanium nitride. It is pivotal that biomaterials should be biodegradable; for example, polyhydroxyalkanoates are biodegradable; also, they do not have bad effects on tissues and cells. Despite this, biomaterials have important roles in prosthetic conditions such as dental pulp regeneration, the healing process, and antibacterial and anti-inflammatory effects. In this review study, the role of biocompatible materials in dental implants is investigated in in vitro and in vivo studies.

Methods of Topical Administration of Drugs and Biological Active Substances for Dental Implants-A Narrative Review

Dental implants are, nowadays, established surgical devices for the restoration of lost teeth. Considered as an alternative for traditional prosthetic appliances, dental implants surpass them in reliability and patient feedback. Local drug delivery around the implants promotes osseointegration and reduces peri-implantitis. However, there are currently no methods of a multiple, precise topical administration of drugs to the implant area. Engineering coatings on the implants, drug application on carriers during implantation, or gingival pockets do not meet all requirements of dental surgeons. Therefore, there is a need to create porous implants and other medical devices that will allow a multiple drug delivery at a controlled dose and release profile without traumatic treatment. Due to the growing demand for the use of biologically active agents to support dental implant treatment at its various stages (implant placement, long-term use of dental superstructures, treatment of the peri-implant conditions) and due to the proven effectiveness of the topical application of pharmacological biologically active agents to the implant area, the authors would like to present a review and show the methods and devices that can be used by clinicians for local drug administration to facilitate dental implant treatment. Our review concludes that there is a need for research in the field of inventions such as new medical devices or implants with gradient solid-porous structures. These devices, in the future, will enable to perform repeatable, controllable, atraumatic, and repeatable injections of active factors that may affect the improvement of osteointegration and the longer survival of implants, as well as the treatment of peri-implantitis.

Counter-Acting Candida albicans-Staphylococcus aureus Mixed Biofilm on Titanium Implants Using Microbial Biosurfactants

This study aimed to grow a fungal-bacterial mixed biofilm on medical-grade titanium and assess the ability of the biosurfactant R89 (R89BS) coating to inhibit biofilm formation. Coated titanium discs (TDs) were obtained by physical absorption of R89BS. Candida albicans-Staphylococcus aureus biofilm on TDs was grown in Yeast Nitrogen Base, supplemented with dextrose and fetal bovine serum, renewing growth medium every 24 h and incubating at 37 °C under agitation. The anti-biofilm activity was evaluated by quantifying total biomass, microbial metabolic activity and microbial viability at 24, 48, and 72 h on coated and uncoated TDs. Scanning electron microscopy was used to evaluate biofilm architecture. R89BS cytotoxicity on human primary osteoblasts was assayed on solutions at concentrations from 0 to 200 μg/mL and using eluates from coated TDs. Mixed biofilm was significantly inhibited by R89BS coating, with similar effects on biofilm biomass, cell metabolic activity and cell viability. A biofilm inhibition >90% was observed at 24 h. A lower but significant inhibition was still present at 48 h of incubation. Viability tests on primary osteoblasts showed no cytotoxicity of coated TDs. R89BS coating was effective in reducing C. albicans-S. aureus mixed biofilm on titanium surfaces and is a promising strategy to prevent dental implants microbial colonization.

Interface between Periodontal Tissues and Dental Materials: Dynamic Changes and Challenges

Periodontal tissues play an important role in the correct aesthetics, function and comfort of the dentition [...]

Nanozymes go oral: nanocatalytic medicine facilitates dental health

Nanozymes are multi-functional nanomaterials with enzyme-like activity, which rapidly won a place in biomedicine due to their number of nanocatalytic materials types and applications. Yan and Gao first discovered horseradish peroxidase-like activity in ferromagnetic nanoparticles in 2007. With the joint efforts of many scientists, a new concept-nanocatalytic medicine-is emerging. Nanozymes overcome the inherent disadvantages of natural enzymes, such as poor environmental stability, high production costs, difficult storage and so on. Their progress in dentistry is following the advancement of materials science. The oral research and application of nanozymes is becoming a new branch of nanocatalytic medicine. In order to highlight the great contribution of nanozymes facilitating dental health, we first review the overall research progress of multi-functional nanozymes in oral related diseases, including treating dental caries, dental pulp diseases, oral ulcers and peri-implantitis; the monitoring of oral cancer, oral bacteria and ions; and the regeneration of soft and hard tissue. Additionally, we also propose the challenges remaining for nanozymes in terms of their research and application, and mention future concerns. We believe that the new catalytic nanomaterials will play important roles in dentistry in the future.

The Translation from In Vitro Bioactive Ion Concentration Screening to In Vivo Application for Preventing Peri-implantitis

Peri-implantitis is a typical pathological condition characterized by the destructive inflammation in the soft tissue and the progressive loss of supporting bones. As the current effective treatments and preventive measures are inconsistent and unpredictable, the use of biomaterials as carriers of bioactive ion coatings is a promising approach. However, the translation from lab to large-scale production and clinical applications is difficult due to a technology barrier. Determining the effective dosage of each ion to achieve an in vivo application of the in vitro screening is challenging. Here, we selected zinc and strontium ions to provide multiple effects on antibacterial activity and osteogenesis. The optimal coating with effective release concentrations of the two ions was obtained after the two-step screening from in vitro testing. The results showed that this type of in vivo bioactive ion usage leads to an enhanced osseointegration during the immediate implantation in a periodontitis-affected environment and prevents soft tissue inflammation and bone resorption in an inflammatory environment. The new biologically active ion screening method could verify the effectiveness of this clinical translation and its potential for large-scale production and could determine the effective dosage of each ion for a specific application.

A long-term controlled drug-delivery with anionic beta cyclodextrin complex in layer-by-layer coating for percutaneous implants devices

This study demonstrated a drug-delivery system with anionic beta cyclodextrin (β-CD) complexes to retain tetracycline (TC) and control its release from multilayers of poly(acrylic acid) (PAA) and poly(l-lysine) (PLL) in a ten double layers ([PAA/PLL]₁₀) coating onto titanium. The drug-delivery capacity of the multilayer system was proven by controlled drug release over 15 days and sustained released over 30 days. Qualitative images confirmed TC retention within the layer-by-layer (LbL) over 30 days of incubation. Antibacterial activity of TC/anionic β-CD released from the LbL was established against Staphylococcus aureus species. Remarkably, [PAA/PLL]₁₀/TC/anionic β-CD antibacterial effect was sustained even after 30 days of incubation. The non-cytotoxic effect of the multilayer system revealed normal human gingival fibroblast growth. It is expected that this novel approach and the chemical concept to improve drug incorporation into the multilayer system will open up possibilities to make the drug release system more applicable to implantable percutaneous devices.

Enhanced Human Gingival Fibroblast Response and Reduced Porphyromonas gingivalis Adhesion with Titania Nanotubes

Successful dental implants rely on stable osseointegration and soft-tissue integration. Titania nanotubes (TNTs) with a diameter of 100 nm could increase the mesenchymal stem cell response and simultaneously decrease Staphylococcus aureus adhesion. However, the interactions between the modified surface and surrounding soft tissues are still unknown. In the present study, we fully investigated the biological behavior of human gingival fibroblasts (HGFs) and the adhesion of Porphyromonas gingivalis (P. gingivalis). TNTs were synthesized on titanium (Ti) surfaces by electrochemical anodization at 10, 30, and 60 V, and the products were denoted as NT10, NT30, and NT60, respectively. NT10 (diameter: 30 nm) and NT30 (diameter: 100 nm) could enhance the HGF functions, such as cell attachment and proliferation and extracellular matrix- (ECM-) related gene expressions, with the latter showing higher enhancement. NT60 (diameter: 200 nm) clearly impaired cell adhesion and proliferation and ECM-related gene expressions. Bacterial adhesion on the TNTs decreased and reached the lowest value on NT30. Therefore, NT30 without pharmaceuticals can be used to substantially enhance the HGF response and reduce P. gingivalis adhesion to the utmost, thus demonstrating significant potential in the transgingival part of dental implants.

Effect of sodium ascorbyl phosphate on osteoblast viability and differentiation

OBJECTIVES AND BACKGROUND

Sodium ascorbyl phosphate (SAP) is a hydrophilic and stable L-ascorbic acid derivative, being converted by the cell phosphatases into free ascorbic acid (AA), which allows its sustained release in the medium. AA participates in the maintenance and healing of the periodontium. It presents a regulatory role of the osteoblastic activity, stimulating the deposition of collagen extracellular matrix followed by the induction of genes associated with the osteoblastic phenotype. It also acts in the elimination of reactive oxygen species, abundantly produced by defense cells in periodontal disease. The aim of this study was to evaluate the effect of SAP on osteoblast viability and differentiation.

METHODS

Mouse preosteoblastic cells of the MC3T3-E1 strain were used. Cell viability was assessed by the trypan blue dye exclusion assay and the expression of genes related to osteoblast differentiation by quantitative PCR. Collagen I secretion was evaluated by ELISA, and mineralized matrix formation was assayed by Alizarin red S staining.

RESULTS

The results showed that SAP at concentrations from 50 to 500 µmol/L does not influence preosteoblast cell viability, but stimulates their differentiation, observed by the induction of RUNX2, COL1A1, and BGLAP2; by the higher secreted levels of collagen I; and also by the increase in the mineralization of the extracellular matrix in cells exposed to this agent at 200 or 400 µmol/L, compared with those not exposed.

CONCLUSION

By its stability and capacity to induce preosteoblastic cell differentiation, our results indicate that the incorporation of SAP into local release devices, membranes/scaffolds or biomaterials, could favor bone tissue formation and therefore periodontal healing.

Biomaterial-based possibilities for managing peri-implantitis

Peri‐implantitis is an inflammatory disease of hard and soft tissues around osseointegrated implants, followed by a progressive damage of alveolar bone. Oral microorganisms can adhere to all types of surfaces by the production of multiple adhesive factors. Inherent properties of materials will influence not only the number of microorganisms, but also their profile and adhesion force onto the material surface. In this perspective, strategies to reduce the adhesion of pathogenic microorganisms on dental implants and their components should be investigated in modern rehabilitation concepts in implant dentistry. To date, several metallic nanoparticle films have been developed to reduce the growth of pathogenic bacteria. However, the main drawback in these approaches is the potential toxicity and accumulative effect of the metals over time. In view of biological issues and in attempt to prevent and/or treat peri‐implantitis, biomaterials as carriers of antimicrobial substances have attracted special attention for application as coatings on dental implant devices. This review will focus on biomaterial‐based possibilities to prevent and/or treat peri‐implantitis by describing concepts and dental implant components suitable for engagement in preventing and treating this disease. Additionally, we raise important criteria referring to the geometric parameters of dental implants and their components, which can directly affect peri‐implant tissue conditions. Finally, we overview currently available biomaterial systems that can be used in the field of oral implantology.