Extracellular mycosynthesis of gold nanoparticles using Trichoderma hamatum: optimization, characterization and antimicrobial activity

Diversity of fungus-mediated synthesis of gold nanoparticles: properties, mechanisms, challenges, and solving methods

Fungi-mediated synthesis of Gold nanoparticles (AuNPs) has advantages in: high efficiency, low energy consumption, no need for extra capping and stabilizing agents, simple operation, and easy isolation and purification. Many fungi have been found to synthesize AuNPs inside cells or outside cells, providing different composition and properties of particles when different fungi species or reaction conditions are used. This is good to produce AuNPs with different properties, but may cause challenges to precisely control the particle shape, size, and activities. Besides, low concentrations of substrate and fungal biomass are needed to synthesize small-size particles, limiting the yield of AuNPs in a large scale. To find clues for the development methods to solve these challenges, the reported mechanisms of the fungi-mediated synthesis of AuNPs were summarized. The mechanisms of intracellular AuNPs synthesis are dependent on gold ions absorption by the fungal cell wall via proteins, polysaccharides, or electric absorption, and the reduction of gold ions via enzymes, proteins, and other cytoplasmic redox mediators in the cytoplasm or cell wall. The extracellular synthesis of AuNPs is mainly due to the metabolites outside fungal cells, including proteins, peptides, enzymes, and phenolic metabolites. These mechanisms cause the great diversity of the produced AuNPs in functional groups, element composition, shapes, sizes, and properties. Many methods have been developed to improve the synthesis efficiency by changing: chloroauric acid concentrations, reaction temperature, pH, fungal mass, and reaction time. However, future studies are still required to precisely control the: shape, size, composition, and properties of fungal AuNPs.

Interface Engineering of PdPt Ultrafine Ethanol Electro-Oxidation Nanocatalysts by Bacterial Soluble Extracellular Polymeric Substances (s-EPS) to Break through Sabatier Principle

Unsatisfactory performance of ethanol oxidation reaction (EOR) catalysts hinders the application of direct ethanol fuel cells (DEFCs), while traditional alloy catalysts (like PdPt) is cursed by Sabatier principle due to countable active site types. However, bacterial soluble extracellular polymeric substances (s-EPS) owning abundent functional groups may help breacking through it by contrusting different active sites on PdPt and inducing them to play synergy effect, which is called interface engineering. Using s-EPS to engineer catalysts is more green and consumes lower energy compared to chemical reagents. Herein, PdPt alloy nanoparticles (≈2.1 nm) are successfully in situ synthesized by/on s-EPS of Bacillus megaterium, an ex-holotype. Tryptophan residuals are proved as the main reductant. In EOR, PdPt@s-EPS shows higher activity (3.89 mA cm-2) than Pd@s-EPS, Pt@s-EPS, Pt/C and most reported akin catalysts. Its stability and durability are excellent, too. DFT modelling further demonstrates that, interface engineering by s-EPS breaks through Sabatier principle, by the synergy of diverse sites owning different degrees of d-p orbital hybridization. This work not only makes DEFCs closer to practice, but provides a facile and green strategy to design more catalysts.

Fabrication of silicon-based nickel nanoflower-encapsulated gelatin microspheres as an active antimicrobial carrier

Local antibiotic application might mitigate the burgeoning problem of rapid emergence of antibiotic resistance in pathogenic microbes. To accomplish this, delivery systems must be engineered. Hydrogels have a wide range of physicochemical properties and can mimic the extracellular matrix, rendering them promising materials for local antibacterial agent application. Here, we synthesized antibacterial silicon (Si)-based nickel (Ni) nanoflowers (Si@Ni) and encapsulated them in gelatin methacryloyl (GelMA) using microfluidic and photo-crosslink technology, constructing uniform micro-sized hydrogel spheres (Si@Ni-GelMA). Si@Ni and Si@Ni-GelMA were characterized using X-ray diffraction, transmission electron microscopy, and scanning electron microscopy. Injectable Si@Ni-GelMA exhibited excellent antibacterial activities owing to the antibiotic effect of Ni against Pseudomonas aeruginosa, Klebsiella pneumoniae, and methicillin-resistant Staphylococcus aureus, while showing negligible cytotoxicity. Therefore, the Si@Ni-GelMA system can be used as drug carriers owing to their injectability, visible light-mediated crosslinking, degradation, biosafety, and superior antibacterial properties.

Nanotechnology in the Diagnosis and Treatment of Antibiotic-Resistant Infections

The development of antimicrobial resistance (AMR), along with the relative reduction in the production of new antimicrobials, significantly limits the therapeutic options in infectious diseases. Thus, novel treatments, especially in the current era, where AMR is increasing, are urgently needed. There are several ongoing studies on non-classical therapies for infectious diseases, such as bacteriophages, antimicrobial peptides, and nanotechnology, among others. Nanomaterials involve materials on the nanoscale that could be used in the diagnosis, treatment, and prevention of infectious diseases. This review provides an overview of the applications of nanotechnology in the diagnosis and treatment of infectious diseases from a clinician's perspective, with a focus on pathogens with AMR. Applications of nanomaterials in diagnosis, by taking advantage of their electrochemical, optic, magnetic, and fluorescent properties, are described. Moreover, the potential of metallic or organic nanoparticles (NPs) in the treatment of infections is also addressed. Finally, the potential use of NPs in the development of safe and efficient vaccines is also reviewed. Further studies are needed to prove the safety and efficacy of NPs that would facilitate their approval by regulatory authorities for clinical use.

Trichoderma hamatum and Its Benefits

Trichoderma hamatum (Bonord.) Bainier (T. hamatum) belongs to Hypocreaceae family, Trichoderma genus. Trichoderma spp. are prominently known for their biocontrol activities and plant growth promotion. Hence, T. hamatum also possess several beneficial activities, such as antimicrobial activity, antioxidant activity, insecticidal activity, herbicidal activity, and plant growth promotion; in addition, it holds several other beneficial properties, such as resistance to dichlorodiphenyltrichloroethane (DDT) and degradation of DDT by certain enzymes and production of certain polysaccharide-degrading enzymes. Hence, the current review discusses the beneficial properties of T. hamatum and describes the gaps that need to be further considered in future studies, such as T. hamatum's potentiality against human pathogens and, in contrast, its role as an opportunistic human pathogen. Moreover, there is a need for substantial study on its antiviral and antioxidant activities.

The Potential of Trichoderma-Mediated Nanotechnology Application in Sustainable Development Scopes

The environmental impact of industrial development has been well-documented. The use of physical and chemical methods in industrial development has negative consequences for the environment, raising concerns about the sustainability of this approach. There is a growing need for advanced technologies that are compatible with preserving the environment. The use of fungi products for nanoparticle (NP) synthesis is a promising approach that has the potential to meet this need. The genus Trichoderma is a non-pathogenic filamentous fungus with a high degree of genetic diversity. Different strains of this genus have a variety of important environmental, agricultural, and industrial applications. Species of Trichoderma can be used to synthesize metallic NPs using a biological method that is environmentally friendly, low cost, energy saving, and non-toxic. In this review, we provide an overview of the role of Trichoderma metabolism in the synthesis of metallic NPs. We discuss the different metabolic pathways involved in NP synthesis, as well as the role of metabolic metabolites in stabilizing NPs and promoting their synergistic effects. In addition, the future perspective of NPs synthesized by extracts of Trichoderma is discussed, as well as their potential applications in biomedicine, agriculture, and environmental health.

Nanobiotechnological approaches in antinociceptive therapy: Animal-based evidence for analgesic nanotherapeutics of bioengineered silver and gold nanomaterials

Pain management is a major challenge in healthcare systems worldwide. Owing to undesirable side effects of current analgesic medications, there is an exceeding need to develop the effective alternative therapeutics. Nowadays, the application of nanomaterials is being highly considered, as their exceptional properties arising from the nanoscale dimensions are undeniable. With the increasing use of metal NPs, more biocompatible and costly methods of synthesis have been developed in which different biological rescores including microorganisms, plants and algae are employed. Nanobiotechnology-based synthesis of nanosized particles is an ecological approach offering safe production of nanoparticles (NPs) by biological resources eliminating the toxicity attributed to the conventional routes. This review provides an assessment of biosynthesized silver nanoparticles (AgNPs) and gold nanoparticles (AuNPs) as antinociceptive agents in recent studies. Living animal models (mice and rats) have been used for analyzing the effect of biogenic NPs on decreasing the nociceptive pain utilizing different methods such as acetic acid-induced writhing test, hot plate test, and formalin test. Potent analgesic activity exhibited by green fabricated AgNPs and AuNPs represents the bright future of nanotechnology in the management of pain and other social and medicinal issues followed by this unpleasant sensation. Moreover, there NPs showed a protective effects on liver, kidney, and body weight in animal models that make them attractive for clinical studies. However, further research is required to fully address the harmless antinociceptive effect of NPs for clinical usage.

Biosynthesis of Silver and Gold Nanoparticles and Their Efficacy Towards Antibacterial, Antibiofilm, Cytotoxicity, and Antioxidant Activities

The World Health Organization (WHO) reports that the emergence of multidrug-resistant and the slow advent of novel and more potent antitumor and antimicrobial chemotherapeutics continue to be of the highest concern for human health. Additionally, the stability, low solubility, and negative effects of existing drugs make them ineffective. Studies into alternative tactics to tackle such tenacious diseases was sparked by anticancer and antibacterial. Silver (Ag) and gold (Au) nanoparticles (NPs) were created from Trichoderma saturnisporum, the much more productive fungal strain. Functional fungal extracellular enzymes and proteins carried out the activities of synthesis and capping of the generated nano-metals. Characterization was done on the obtained Ag-NPs and Au-NPs through UV-vis, FTIR, XRD, TEM, and SEM. Additionally, versus methicillin-sensitive Staphylococcus aureus (MSSA) and methicillin-resistant Staphylococcus aureus (MRSA), Pseudomonas aeruginosa, and Klebsiella pneumoniae, the antibacterial activities of Ag-NPs and Au-NPs were assessed. In particular, the Ag-NPs were more effective against pathogenic bacteria than Au-NPs. Furthermore, antibiofilm study that shown Au-NPs had activity more than Ag-NPs. Interestingly, applying the DPPH procedure, these noble metallic NPs had antioxidant activity, in which the IC₅₀ for Ag-NPs and Au-NPs was 73.5 μg/mL and 190.0 μg/mL, respectively. According to the cytotoxicity evaluation results, the alteration in the cells was shown as loss of their typical shape, partial or complete loss of monolayer, granulation, shrinking, or cell rounding with IC₅₀ for normal Vero cell were 693.68 μg/mL and 661.24 μg/mL, for Ag-NPs and Au-NPs, respectively. While IC₅₀ for cancer cell (Mcf7) was 370.56 μg/mL and 394.79 μg/mL for Ag-NPs and Au-NPs, respectively. Ag-NPs and Au-NPs produced via green synthesis have the potential to be employed in the medical industry as beneficial nanocompounds.

The responses and detoxification mechanisms of dark septate endophytes (DSE), Exophiala salmonis, to CuO nanoparticles

To understand the tolerance mechanisms of dark septate endophytes (DSE), Exophiala salmonis, to CuO nanoparticles (CuO-NPs) with different sizes (40 and 150 nm), we investigated the morphology, antioxidant response, Cu subcellular distribution, and the melanin gene expression in the mycelia of E. salmonis. E. salmonis was cultured in liquid and solid media under the stress of increasing CuO-NP concentrations (0, 50, 100, 150, and 250 mg/L). Results showed that (1) E. salmonis showed good CuO-NP tolerance, and the tolerance to CuO-NPs at 150 nm was stronger than that at 40 nm. A large number of agglomeration structures were observed on the mycelia surface with the exception of 50 mg/L CuO-NPs with a diameter of 150 nm. (2) CuO-NP stress significantly stimulated the production of antioxidant enzymes, particularly the CuO-NPs with small particle size (40 nm). (3) Cu uptaken by E. salmonis increased proportionally with the increase of CuO-NP concentration in the medium. More than 80% Cu was absorbed in cell wall of mycelia treated with a small particle size (40 nm). (4) FTIR analysis revealed that hydroxyl, amine, carboxyl, and phosphate groups were associated with CuO-NP binding regardless of particle size. (5) Fungal melanin content increased with the addition of CuO-NPs; the increase of melanin induced by CuO-NPs with small particle size (40 nm) was more significant. (6) The expression of 1,3,6,8-tetrahydroxynaphthalene reductase (Arp2) in the melanin synthesis pathway increased under the stress of CuO-NPs, and CuO-NPs with a small particle size (40 nm) caused a significant change in the expression level of Arp2 gene than those with a large particle size (150 nm). In conclusion, E. salmonis had a strong tolerance to CuO-NPs and mitigated the toxic effects of CuO-NPs through the antioxidant system, the expression of genes related to melanin synthesis, and the synthesis of melanin.

Diversity of Biogenic Nanoparticles Obtained by the Fungi-Mediated Synthesis: A Review

Fungi are very promising biological objects for the green synthesis of nanoparticles. Biogenic synthesis of nanoparticles using different mycological cultures and substances obtained from them is a promising, easy and environmentally friendly method. By varying the synthesis conditions, the same culture can be used to produce nanoparticles with different sizes, shapes, stability in colloids and, therefore, different biological activity. Fungi are capable of producing a wide range of biologically active compounds and have a powerful enzymatic system that allows them to form nanoparticles of various chemical elements. This review attempts to summarize and provide a comparative analysis of the currently accumulated data, including, among others, our research group's works, on the variety of the characteristics of the nanoparticles produced by various fungal species, their mycelium, fruiting bodies, extracts and purified fungal metabolites.

Breaking down the cell wall: Still an attractive antibacterial strategy

Since the advent of penicillin, humans have known about and explored the phenomenon of bacterial inhibition via antibiotics. However, with changes in the global environment and the abuse of antibiotics, resistance mechanisms have been selected in bacteria, presenting huge threats and challenges to the global medical and health system. Thus, the study and development of new antimicrobials is of unprecedented urgency and difficulty. Bacteria surround themselves with a cell wall to maintain cell rigidity and protect against environmental insults. Humans have taken advantage of antibiotics to target the bacterial cell wall, yielding some of the most widely used antibiotics to date. The cell wall is essential for bacterial growth and virulence but is absent from humans, remaining a high-priority target for antibiotic screening throughout the antibiotic era. Here, we review the extensively studied targets, i.e., MurA, MurB, MurC, MurD, MurE, MurF, Alr, Ddl, MurI, MurG, lipid A, and BamA in the cell wall, starting from the very beginning to the latest developments to elucidate antimicrobial screening. Furthermore, recent advances, including MraY and MsbA in peptidoglycan and lipopolysaccharide, and tagO, LtaS, LspA, Lgt, Lnt, Tol-Pal, MntC, and OspA in teichoic acid and lipoprotein, have also been profoundly discussed. The review further highlights that the application of new methods such as macromolecular labeling, compound libraries construction, and structure-based drug design will inspire researchers to screen ideal antibiotics.

Metal-Based Nanoparticles: Antibacterial Mechanisms and Biomedical Application

The growing increase in antibiotic-resistant bacteria has led to the search for new antibacterial agents capable of overcoming the resistance problem. In recent years, nanoparticles (NPs) have been increasingly used to target bacteria as an alternative to antibiotics. The most promising nanomaterials for biomedical applications are metal and metal oxide NPs, due to their intrinsic antibacterial activity. Although NPs show interesting antibacterial properties, the mechanisms underlying their action are still poorly understood, limiting their use in clinical applications. In this review, an overview of the mechanisms underlying the antibacterial activity of metal and metal oxide NPs will be provided, relating their efficacy to: (i) bacterial strain; (ii) higher microbial organizations (biofilm); (iii) and physico-chemical properties of NPs. In addition, bacterial resistance strategies will be also discussed to better evaluate the feasibility of the different treatments adopted in the clinical safety fields. Finally, a wide analysis on recent biomedical applications of metal and metal oxide NPs with antibacterial activity will be provided.

Fungi-derived agriculturally important nanoparticles and their application in crop stress management - Prospects and environmental risks

Nanotechnology has a wide range of agricultural applications, with emphasize on the development of novel nano-agrochemicals such as, nano-fertilizer and nano-pesticides. It has a significant impact on sustainable agriculture by increasing agricultural productivity, while reducing the use of inorganic fertilizers, pesticides, and herbicides. Nano-coating delivery methods for agrochemicals have improved agrochemical effectiveness, safety, and consistency. Biosynthesis of nanoparticles (NPs) has recently been recognized as an effective tool, contrary to chemically derived NPs, for plant abiotic and biotic stress control, and crop improvement. In this regard, fungi have tremendous scope and importance for producing biogenic NPs of various sizes, shapes, and characteristics. Fungi are potential candidates for synthesis of biogenic NPs due to their enhanced bioavailability, biological activity, and higher metal tolerance. However, their biomimetic properties and high capacity for dispersion in soil, water environments, and foods may have negative environmental consequences. Furthermore, their bioaccumulation raises significant concerns about the novel properties of nanomaterials potentially causing adverse biological effects, including toxicity. This review provides a concise outline of the growing role of fungal-mediated metal NPs synthesis, its potential applications in crop field, and associated issues of nano-pollution in soil and its future implications.

Injectable hyaluronic acid hydrogel encapsulated with Si-based NiO nanoflower by visible light cross-linking: Its antibacterial applications

Bacterial infections have become a severe threat to human health and antibiotics have been developed to treat them. However, extensive use of antibiotics has led to multidrug-resistant bacteria and reduction of their therapeutic effects. An efficient solution may be localized application of antibiotics using a drug delivery system. For clinical application, they need to be biodegradable and should offer a prolonged antibacterial effect. In this study, a new injectable and visible-light-crosslinked hyaluronic acid (HA) hydrogel loaded with silicon (Si)-based nickel oxide (NiO) nanoflowers (Si@NiO) as an antibacterial scaffold was developed. Si@NiO nanoflowers were synthesized using chemical bath deposition before encapsulating them in the HA hydrogel under a mild visible-light-crosslinking conditions to generate a Si@NiO-hydrogel. Si@NiO synthesis was confirmed using scanning electron microscopy, transmission electron microscopy, and powder X-ray diffraction. As-prepared Si@NiO-hydrogel exhibited enhanced mechanical properties compared to a control bare hydrogel sample. Moreover, Si@NiO-hydrogel exhibits excellent antibacterial properties against three bacterial strains (P. aeruginosa, K. pneumoniae, and methicillin-resistant Staphylococcus aureus (>99.9% bactericidal rate)) and negligible cytotoxicity toward mouse embryonic fibroblasts. Therefore, Si@NiO-hydrogel has the potential for use in tissue engineering and biomedical applications owing to its injectability, visible-light crosslink ability, degradability, biosafety, and superior antibacterial property.

Antibacterial and Antibiofilm Activity of Mercaptophenol Functionalized-Gold Nanorods Against a Clinical Isolate of Methicillin-Resistant Staphylococcus aureus

Gold nanorods (AuNRs) were synthesized by the seed-mediated wet chemical method using a binary surfactant system. AuNRs were stabilized with polyethylene glycol, then functionalized with 4-mercaptophenol (4-MPH) ligand by surface ligand exchange. The surface-functionalized AuNRs (4-MPH-AuNRs) exhibited a typical UV–vis spectrum of AuNRs with a slightly shifted longitudinal peak. Furthermore, 4-MPH-AuNRs demonstrated a similar Fourier-Transformed Infrared spectrum to 4-MPH and a fading of the thiol band, which suggests a successful functionalization through thiol-gold binding. The antibacterial and antibiofilm activities of 4-MPH-AuNRs were evaluated against a clinical isolate of Methicillin-Resistant Staphylococcus aureus (MRSA). The results indicate that 4-MPH-AuNRs exhibit a bactericidal activity with a minimum inhibitory concentration (MIC) of ~ 6.25 $$\upmu$$ μ g/mL against a planktonic suspension of MRSA. Furthermore, 4-MPH-AuNRs resulted in a 1.8–2.9 log-cycle reduction of MRSA biofilm viable count over a concentration range of 100–6.0 $$\upmu$$ μ g/mL. The bacterial uptake of the surface-modified nanorods was investigated by inductively coupled plasma-optical emission spectroscopy (ICP-OES) and scanning electron microscopy (SEM) imaging; the results reveal that the nanorods were internalized into the bacterial cells after 6 h (h) of exposure. SEM imaging revealed a significant accumulation of the nanorods at the bacterial cell wall and a possible cellular internalization. Thus, 4-MPH-AuNRs can be considered a potential antibacterial agent, particularly against MRSA strain biofilms.

Evaluation of Phoma sp. Biomass as an Endophytic Fungus for Synthesis of Extracellular Gold Nanoparticles with Antibacterial and Antifungal Properties

The aim of our study was to examine the different concentrations of AuNPs as a new antimicrobial substance to control the pathogenic activity. The extracellular synthesis of AuNPs performed by using Phoma sp. as an endophytic fungus. Endophytic fungus was isolated from vascular tissue of peach trees (Prunus persica) from Baft, located in Kerman province, Iran. The UltraViolet-Visible Spectroscopy (UV-Vis spectroscopy) and Fourier transform infrared spectroscopy provided the absorbance peak at 526 nm, while the X-ray diffraction and transmission electron microscopy images released the formation of spherical AuNPs with sizes in the range of 10-100 nm. The findings of inhibition zone test of Au nanoparticles (AuNPs) showed a desirable antifungal and antibacterial activity against phytopathogens including Rhizoctonia solani AG1-IA (AG1-IA has been identified as the dominant anastomosis group) and Xanthomonas oryzae pv. oryzae. The highest inhibition level against sclerotia formation was 93% for AuNPs at a concentration of 80 μg/mL. Application of endophytic fungus biomass for synthesis of AuNPs is relatively inexpensive, single step and environmentally friendly. In vitro study of the antifungal activity of AuNPs at concentrations of 10, 20, 40 and 80 μg/mL was conducted against rice fungal pathogen R. solani to reduce sclerotia formation. The experimental data revealed that the Inhibition rate (RH) for sclerotia formation was (15, 33, 74 and 93%), respectively, for their corresponding AuNPs concentrations (10, 20, 40 and 80 μg/mL). Our findings obviously indicated that the RH strongly depend on AuNPs rates, and enhance upon an increase in AuNPs rates. The application of endophytic fungi biomass for green synthesis is our future goal.

Apium graveolens reduced phytofabricated gold nanoparticles and their impacts on the glucose utilization pattern of the isolated rat hemidiaphragm

The integration of nanotechnology with herbal medicines overcomes the limitations of herbal therapy and offers desirable bioactivity. Thus, this study was aimed at synthesizing Apium graveolens-gold nanoparticles (AG-AuNPs) and exploring their impact on the glucose utilization pattern of the isolated rat hemidiaphragm. The AG-AuNPs appeared in cherry red color and showed a plasmonic peak at 534nm. The bio-reduced AG-AuNPs appeared as spherical shapes with varying sizes of about 4–15 nm. It also depicted the zeta potential of -19.5 mV, face-centered cubic crystalline nature, stretching vibrations for different functionalities, and in vitro stability during various characterization studies. The AG-AuNPs showed non-cytotoxicity and promoted cellular glucose uptake on their exposure to the cell line and the diaphragm, respectively. Moreover, the identified flavonoids and polyphenols of AG depicted in silico interactions with the insulin signaling molecule. The observed results suggest that the interacting ability of AG-AuNPs with the insulin signaling molecule can promote the glucose uptake efficiency of the diaphragm.

Therapeutic effect of biosynthetic gold nanoparticles on multidrug-resistant Escherichia coli and Salmonella species isolated from ruminants

Background and Aim:

Multidrug-resistant (MDR) pathogenic microorganisms have become a global problem in ruminants as a result of the intensive use of antibiotics, causing the development of resistance among gut microbiota. The antibiotic-resistant microorganisms can be transferred from diseased animals to humans. This study aimed to determine the prevalence of MDR Escherichia coli and Salmonella spp. isolated from cattle, buffaloes, sheep, and goats suffering from respiratory signs, diarrhea, and mastitis and to screen the antibiotic sensitivity of selected isolated bacteria. It also detected antibiotic-resistance genes by polymerase chain reaction (PCR), produced green gold nanoparticles (AuNPs) using plant extracts (Artemisia herba-alba and Morus alba), and evaluated the antimicrobial activities of these biosynthesized nanoparticles on selected pathogens (E. coli and Salmonella spp.).

Materials and Methods:

MDR E. coli and Salmonella spp. were investigated using fecal samples (n=408), nasal swabs (n=358), and milk samples (n=227) of cattle, buffaloes, sheep, and goats with or without clinical signs, including respiratory manifestations, pneumonia, diarrhea, and mastitis, from different governorates in Egypt. E. coli and Salmonella spp. were isolated and identified on selective media, which were confirmed by biochemical reactions and PCR. Antimicrobial susceptibility testing against 10 commonly used antibiotics was performed using the Kirby-Bauer disk diffusion method. Antibiotic resistance genes bla_TEM, bla_SHV, bla_OXA, and bla_CTX−M were detected by PCR. The antibacterial effect of the biosynthesized AuNPs was evaluated by MIC and well diffusion assay. The biosynthesized AuNPs were also characterized by ultraviolet-visible spectrophotometry and transmission electron microscopy (TEM).

Results:

Among all fecal samples, the prevalence of E. coli was 18.4% (183/993) and that of Salmonella spp. was 16.7% (66/408), as determined by cultural and molecular tests. All isolates of E. coli and Salmonella spp. were 100% resistant to ampicillin (AM) and amoxicillin and highly resistant to cefoxitin and AM-sulbactam. The total rate of resistance genes in E. coli was 61.2% (112/183), while that in Salmonella was 63.6% (42/66) for pathogens isolated from ruminants with respiratory manifestations, pneumonia, diarrhea, and mastitis. Among the resistance genes, bla_TEM had the highest prevalence rate in E. coli (25.9%, 21/81) while bla_SHV had the lowest (9.8%, 8/81) in fecal swabs. AuNPs were successfully synthesized using aqueous leaf extract of A. herba-alba and M. alba as bioreducing agents. TEM analysis showed particle size of 10-42 nm for A. herba-alba and M. alba AuNPs. The biosynthesized AuNPs showed antibacterial activity against MDR E. coli and Salmonella spp.

Conclusion:

Rapid and accurate diagnostic methods are the cornerstone for effective treatment to reduce the risk of antimicrobial-resistant pathogenic microorganisms. This is particularly important for overcoming the increasing rate of MDR in ruminants with respiratory manifestations, pneumonia, diarrhea, and mastitis. This can be complemented by the development of AuNPs synthesized in an environmentally friendly manner AuNPs using natural plant extracts for the treatment of antibiotic-resistant microorganisms.

Gold Nanoparticles: Biosynthesis and Potential of Biomedical Application

Gold nanoparticles (AuNPs) are extremely promising objects for solving a wide range of biomedical problems. The gold nanoparticles production by biological method ("green synthesis") is eco-friendly and allows minimization of the amount of harmful chemical and toxic byproducts. This review is devoted to the AuNPs biosynthesis peculiarities using various living organisms (bacteria, fungi, algae, and plants). The participation of various biomolecules in the AuNPs synthesis and the influence of size, shapes, and capping agents on the functionalities are described. The proposed action mechanisms on target cells are highlighted. The biological activities of "green" AuNPs (antimicrobial, anticancer, antiviral, etc.) and the possibilities of their further biomedical application are also discussed.

Trichoderma and Nanotechnology in Sustainable Agriculture: A Review

Due to their unique properties and functionalities, nanomaterials can be found in different activities as pharmaceutics, cosmetics, medicine, and agriculture, among others. Nowadays, formulations with nano compounds exist to reduce the application of conventional pesticides and fertilizers. Among the most used are nanoparticles (NPs) of copper, zinc, or silver, which are known because of their cytotoxicity, and their accumulation can change the dynamic of microbes present in the soil. In agriculture, Trichoderma is widely utilized as a safe biocontrol strategy and to promote plant yield, making it susceptible to be in contact with nanomaterials that can interfere with its viability as well as its biocontrol and plant growth promotion effects. It is well-known that strains of Trichoderma can tolerate and uptake heavy metals in their bulk form, but it is poorly understood whether the same occurs with nanomaterials. Interestingly, Trichoderma can synthesize NPs that exhibit antimicrobial activities against various organisms of interest, including plant pathogens. In this study, we summarize the main findings regarding Trichoderma and nanotechnology, including its use to synthesize NPs and the consequence that these compounds might have in this fungus and its associations. Moreover, based on these findings we discuss whether it is feasible to develop agrochemicals that combine NPs and Trichoderma strains to generate more sustainable products or not.

Current Biomedical and Diagnostic Applications of Gold Micro and Nanoparticles

Production of particles and their adaptation in the pharmacology became an object of interest, and they are the currently introduced therapies based on the use of micro and nanoparticles. The use of gold particles is not an exception. This review has focused on the application of gold micro and nanoparticles in pharmacology and biomedicine. The particles can be used for diagnosis respective theranostic of cancer, rheumatoid arthritis and as antimicrobial means. Besides these applications, specifications of gold, gold particles, and colloidal gold manufacturing and their comparison with the solid gold, are described as well. This review is based on a survey of actual scientific literature.

Nanoparticles as Novel Emerging Therapeutic Antibacterial Agents in the Antibiotics Resistant Era

Microorganisms are highly resistant to the antibiotics that are commonly used and thus are becoming serious public health problem. There is an urgent need for new approaches to monitor microbial behavior, and hence, nanomaterial can be a very promising solution. Nanotechnology has led to generation of novel antimicrobial agents such as gold, silver, zinc, copper, poly-£-lysine, iron, and chitosan which have shown remarkable potential, demonstrating their applicability as proficient antibiotic agents against various pathogenic bacterial species. The antimicrobial nanoproduct physically kills the organism's cell membranes that prevent the production of drug-resistant microorganisms. These nanosized particles can also be used as diagnostic agents, targeted drug delivery vehicle, noninvasive imaging technologies, and in vivo visual monitoring of tumors angiogenesis. These nanomaterials provide a promising platform for diagnostics, prognostic, drug delivery, and treatment of diseases by means of nanoengineered products/devices. This owes to their small size, prolonged antimicrobial efficacy with insignificant toxicity creating less environmental hazard or toxicity. Scientists address several problems such as health, bioethical problems, toxicity risks, physiological, and pharmaceutical concerns related with the usage of NPs as antimicrobial agents as current research lack adequate data and information on the safe use of certain tools and materials.

Methods of green synthesis of Au NCs with emphasis on their morphology: A mini-review

Greener synthetic methods are becoming more popular as a means of reducing environmental pollution caused by reaction byproducts. Another important advantage of green methods is their low cost and the abundance of raw materials. Herein, we investigate the green Au nanoclusters (NCs) using microorganisms (bacteria and fungi) and plant extraction with various shapes and development routes. Natural products derived from plants, tea, coffee, banana, simple amino acids, enzyme, sugar, and glucose have been used as reductants and as capping agents during synthesis in literature. The synthesis techniques are generally chemical, physical and green methods. Green synthesis of Au NCs using bacteria and fungi can be divided into intracellular and extracellular. In an intracellular manner, bacterial cells are implanted in a culture medium containing salt and heated under suitable growth conditions. However, in an extracellular manner, the Au ions are directed from the outside into the cell. Thus, these methods are considered as a better alternative to chemical and physical synthesis. The research on green synthesis of Au nanoparticles (NPs) and its influence on their size and morphology are summarized in this review.

Fungal pretreatment to enhance the yield of phytochemicals and evaluation of α-amylase and α-glucosidase inhibition using Cinnamomum zeylanicum (L.) quills pressurized water extracts

Bioactive compounds entrapped in plant materials can be effectively recovered using fungal enzymes. Cinnamomum zeylanicum Sri Wijaya (SW) and Sri Gemunu (SG) accessions and commercially available C. zeylanicum (CC) were subjected to fungal pretreatment and extracted with pressured water (PWE, 0·098 MPa). Thirteen fungal species were isolated and the substrate utilization ability of the species was tested using cellulose, pectin and lignin (indirectly). Total phenolic content (TPC, Folin-Ciocalteu method), proanthocyanidin content (PC, vanillin method) and α-amylase and α-glucosidase inhibitory potential of the extracts were evaluated. The anti-diabetic drug, Acarbose was used as the positive control. Trichoderma harzianum (MH298760) showed the highest cell lysis ability and hence was used for the microbial pretreatment process. Extracts of SW treated with T. harzianum species (Pre-SW) gave the highest percentage yield (4·08% ± 0·15%), significantly potent inhibition (P < 0·05) of α-amylase and α-glucosidase activities (IC₅₀ 57 ± 8 and 36 ± 8 μg ml^-1 respectively), TPC (2·24 ± 0·02 mg gallic acid equivalent g^-1 ), and PC (48·2 ± 0·4 mg of catechin equivalent g^-1 ) compared to Pre-SG, Pre-CC and nontreated samples. Trichoderma harzianum treatment can enhance the hypoglycaemic properties, PC and TPC of Cinnamon extracts and provide new insights into the recovery of phytochemicals.

Metal-Based Nanoparticles as Antimicrobial Agents: An Overview

Metal-based nanoparticles have been extensively investigated for a set of biomedical applications. According to the World Health Organization, in addition to their reduced size and selectivity for bacteria, metal-based nanoparticles have also proved to be effective against pathogens listed as a priority. Metal-based nanoparticles are known to have non-specific bacterial toxicity mechanisms (they do not bind to a specific receptor in the bacterial cell) which not only makes the development of resistance by bacteria difficult, but also broadens the spectrum of antibacterial activity. As a result, a large majority of metal-based nanoparticles efficacy studies performed so far have shown promising results in both Gram-positive and Gram-negative bacteria. The aim of this review has been a comprehensive discussion of the state of the art on the use of the most relevant types of metal nanoparticles employed as antimicrobial agents. A special emphasis to silver nanoparticles is given, while others (e.g., gold, zinc oxide, copper, and copper oxide nanoparticles) commonly used in antibiotherapy are also reviewed. The novelty of this review relies on the comparative discussion of the different types of metal nanoparticles, their production methods, physicochemical characterization, and pharmacokinetics together with the toxicological risk encountered with the use of different types of nanoparticles as antimicrobial agents. Their added-value in the development of alternative, more effective antibiotics against multi-resistant Gram-negative bacteria has been highlighted.

Identification and characterization of thermostable endo-polygalacturonase II B from Aspergillus luchuensis

Endo-polygalacturonase II B (PgaB) from Aspergillus luchuensis was orthologous to endo-polygalacturonase from Aspergillus niger with mutant sites Thr42Ser and Glu52Ala. Mature pgaB gene was cloned from the genomic DNA of A. luchuensis and secreted expressed with over 90% purity in Pichia Pastoris and reached 1.0 g/L after 144 hr culture. The recombinant PgaB was further purified by Ni-NTA chromatography. Using polygalacturonic acid (PGA) as substrate, the optimal condition for PgaB activity was 40°C and pH 4.5, respectively. Km and Vmax of PgaB were 0.19 mmol/l and 103.58 μmol min^-1  mg^-1 , respectively. The relative activity of PgaB remained more than 60% and 40% of maximum activity at 50 and 60°C for 7 hr. PgaB increased the light transmittance by 85% and showed high efficiency in juice clarification. The main product was galacturonic acid oligosaccharides with degrees of polymers (DP) 1-3. The PgaB is a potential pectinolytic enzyme in food industries. PRACTICAL APPLICATIONS: Endo-polygalacturonase II B (PgaB) was identified from Aspergillus luchuensis, a filamentous fungus widely used in food and beverage fermentation in East Asia. PgaB still kept its most activity at 60°C for 7 hr. Polygalacturonic acid (PGA) can be digested effectively by the PgaB and the main products are galacturonic acid oligosaccharides with degrees of polymers (DP) 1-3. PgaB shows high efficiency in juice clarification. The PgaB is a potential pectinolytic enzyme for the applications in food industries.