In planta gene targeting can be enhanced by the use of CRISPR/Cas12a

Insertion of YFP at P5CS1 and AFL1 shows the potential, and potential complications, of gene tagging for functional analyses of stress-related proteins

Crispr/CAS9-enabled homologous recombination to insert a tag in frame with an endogenous gene can circumvent difficulties such as context-dependent promoter activity that complicate analysis of gene expression and protein accumulation patterns. However, there have been few reports examining whether such gene targeting/gene tagging (GT) can alter expression of the target gene. The enzyme encoded by Δ1-pyrroline-5-carboxylate synthetase 1 (P5CS1) is key for stress-induced proline synthesis and drought resistance, yet its expression pattern and protein localisation have been difficult to assay. We used GT to insert YFP in frame with the 5' or 3' ends of the endogenous P5CS1 and At14a-Like 1 (AFL1) coding regions. Insertion at the 3' end of either gene generated homozygous lines with expression of the gene-YFP fusion indistinguishable from the wild type allele. However, for P5CS1 this occurred only after selfing and advancement to the T5 generation allowed initial homozygous lethality of the insertion to be overcome. Once this was done, the GT-generated P5CS1-YFP plants revealed new information about P5CS1 localisation and tissue-specific expression. In contrast, insertion of YFP at the 5' end of either gene blocked expression. The results demonstrate that GT can be useful for functional analyses of genes that are problematic to properly express by other means but also show that, in some cases, GT can disrupt expression of the target gene.

Deficiency of both classical and alternative end-joining pathways leads to a synergistic defect in double-strand break repair but not to an increase in homology-dependent gene targeting in Arabidopsis

In eukaryotes, double-strand breaks (DSBs) are either repaired by homologous recombination (HR) or non-homologous end-joining (NHEJ). In somatic plant cells, HR is very inefficient. Therefore, the vast majority of DSBs are repaired by two different pathways of NHEJ. The classical (cNHEJ) pathway depends on the heterodimer KU70/KU80, while polymerase theta (POLQ) is central to the alternative (aNHEJ) pathway. Surprisingly, Arabidopsis plants are viable, even when both pathways are impaired. However, they exhibit severe growth retardation and reduced fertility. Analysis of mitotic anaphases indicates that the double mutant is characterized by a dramatic increase in chromosome fragmentation due to defective DSB repair. In contrast to the single mutants, the double mutant was found to be highly sensitive to the DSB-inducing genotoxin bleomycin. Thus, both pathways can complement for each other efficiently in DSB repair. We speculated that in the absence of both NHEJ pathways, HR might be enhanced. This would be especially attractive for gene targeting (GT) in which predefined changes are introduced using a homologous template. Unexpectedly, the polq single mutant as well as the double mutant showed significantly lower GT frequencies in comparison to wildtype plants. Accordingly, we were able to show that elimination of both NHEJ pathways does not pose an attractive approach for Agrobacterium-mediated GT. However, our results clearly indicate that a loss of cNHEJ leads to an increase in GT frequency, which is especially drastic and attractive for practical applications, in which the in planta GT strategy is used.

Molecular analysis of the role of polymerase theta in gene targeting in Arabidopsis thaliana

Precise genetic modification can be achieved via a sequence homology-mediated process known as gene targeting (GT). Whilst established for genome engineering purposes, the application of GT in plants still suffers from a low efficiency for which an explanation is currently lacking. Recently reported reduced rates of GT in A. thaliana deficient in polymerase theta (Polθ), a core component of theta-mediated end joining (TMEJ) of DNA breaks, have led to the suggestion of a direct involvement of this enzyme in the homology-directed process. Here, by monitoring homology-driven gene conversion in plants with CRISPR reagent and donor sequences pre-integrated at random sites in the genome (in planta GT), we demonstrate that Polθ action is not required for GT, but instead suppresses the process, likely by promoting the repair of the DNA break by end-joining. This finding indicates that lack of donor integration explains the previously established reduced GT rates seen upon transformation of Polθ-deficient plants. Our study additionally provides insight into ectopic gene targeting (EGT), recombination events between donor and target that do not map to the target locus. EGT, which occurs at similar frequencies as "true" GT during transformation, was rare in our in planta GT experiments arguing that EGT predominantly results from target locus recombination with nonintegrated T-DNA molecules. By describing mechanistic features of GT our study provides directions for the improvement of precise genetic modification of plants.

Editing the nuclear localization signals of E1 and E1Lb enables the production of tropical soybean in temperate growing regions

Soybean is a typical short-day crop, and most commercial soybean cultivars are restricted to a relatively narrow range of latitudes due to photoperiod sensitivity. Photoperiod sensitivity hinders the utilization of soybean germplasms across geographical regions. When grown in temperate regions, tropical soybean responds to prolonged day length by increasing the vegetative growth phase and delaying flowering and maturity, which often pushes the harvest window past the first frost date. In this study, we used CRISPR/LbCas12a to edit a North American subtropical soybean cultivar named 06KG218440 that belongs to maturity group 5.5. By designing one gRNA to edit the nuclear localization signal (NLS) regions of both E1 and E1Lb, we created a series of new germplasms with shortened flowering time and time to maturity and determined their favourable latitudinal zone for cultivation. The novel partial function alleles successfully achieve yield and early maturity trade-offs and exhibit good agronomic traits and high yields in temperate regions. This work offers a straightforward editing strategy to modify subtropical and tropical soybean cultivars for temperate growing regions, a strategy that could be used to enrich genetic diversity in temperate breeding programmes and facilitate the introduction of important crop traits such as disease tolerance or high yield.

Comparison of Cas12a and Cas9-mediated mutagenesis in tomato cells

Cas12a is a promising addition to the CRISPR toolbox, offering versatility due to its TTTV-protospacer adjacent motif (PAM) and the fact that it induces double-stranded breaks (DSBs) with single-stranded overhangs. We characterized Cas12a-mediated genome editing in tomato using high-throughput amplicon sequencing on protoplasts. Of the three tested variants, Lachnospiraceae (Lb) Cas12a was the most efficient. Additionally, we developed an easy and effective Golden-Gate-based system for crRNA cloning. We compared LbCas12a to SpCas9 by investigating on-target efficacy and specificity at 35 overlapping target sites and 57 (LbCas12a) or 100 (SpCas9) predicted off-target sites. We found LbCas12a an efficient, robust addition to SpCas9, with similar overall though target-dependent efficiencies. LbCas12a induced more and larger deletions than SpCas9, which can be advantageous for specific genome editing applications. Off-target activity for LbCas12a was found at 10 out of 57 investigated sites. One or two mismatches were present distal from the PAM in all cases. We conclude that Cas12a-mediated genome editing is generally precise as long as such off-target sites can be avoided. In conclusion, we have determined the mutation pattern and efficacy of Cas12a-mediated CRISPR mutagenesis in tomato and developed a cloning system for the routine application of Cas12a for tomato genome editing.

Optimizing ErCas12a for efficient gene editing in Arabidopsis thaliana

The ErCas12a nuclease, also known as MAD7, is part of a CRISPR/Cas system from Eubacterium rectale and distantly related to Cas12a nucleases. As it shares only 31% sequence homology with the commonly used AsCas12a, its intellectual property may not be covered by the granted patent rights for Cas12a nucleases. Thus, ErCas12a became an attractive alternative for practical applications. However, the editing efficiency of ErCas12a is strongly target sequence- and temperature-dependent. Therefore, optimization of the enzyme activity through protein engineering is especially attractive for its application in plants, as they are cultivated at lower temperatures. Based on the knowledge obtained from the optimization of Cas12a nucleases, we opted to improve the gene editing efficiency of ErCas12a by introducing analogous amino acid exchanges. Interestingly, neither of these mutations analogous to those in the enhanced or Ultra versions of AsCas12a resulted in significant editing enhancement of ErCas12a in Arabidopsis thaliana. However, two different mutations, V156R and K172R, in putative alpha helical structures of the enzyme showed a detectable improvement in editing. By combining these two mutations, we obtained an improved ErCas12a (imErCas12a) variant, showing several-fold increase in activity in comparison to the wild-type enzyme in Arabidopsis. This variant yields strong editing efficiencies at 22 °C which could be further increased by raising the cultivation temperature to 28 °C and even enabled editing of formerly inaccessible targets. Additionally, no enhanced off-site activity was detected. Thus, imErCas12a is an economically attractive and efficient alternative to other CRISPR/Cas systems for plant genome engineering.

Application of multiple sgRNAs boosts efficiency of CRISPR/Cas9-mediated gene targeting in Arabidopsis

BACKGROUND

Precise gene targeting (GT) is a powerful tool for heritable precision genome engineering, enabling knock-in or replacement of the endogenous sequence via homologous recombination. We recently established a CRISPR/Cas9-mediated approach for heritable GT in Arabidopsis thaliana (Arabidopsis) and rice and reported that the double-strand breaks (DSBs) frequency of Cas9 influences the GT efficiency. However, the relationship between DSBs and GT at the same locus was not examined. Furthermore, it has never been investigated whether an increase in the number of copies of sgRNAs or the use of multiple sgRNAs would improve the efficiency of GT.

RESULTS

Here, we achieved precise GT at endogenous loci Embryo Defective 2410 (EMB2410) and Repressor of Silencing 1 (ROS1) using the sequential transformation strategy and the combination of sgRNAs. We show that increasing of sgRNAs copy number elevates both DSBs and GT efficiency. On the other hand, application of multiple sgRNAs does not always enhance GT efficiency. Our results also suggested that some inefficient sgRNAs would play a role as a helper to facilitate other sgRNAs DSBs activity.

CONCLUSIONS

The results of this study clearly show that DSB efficiency, rather than mutation pattern, is one of the most important key factors determining GT efficiency. This study provides new insights into the relationship between sgRNAs, DSBs, and GTs and the molecular mechanisms of CRISPR/Cas9-mediated GTs in plants.

The long non-coding RNA LINDA restrains cellular collapse following DNA damage in Arabidopsis thaliana

The genomic integrity of every organism is endangered by various intrinsic and extrinsic stresses. To maintain genomic integrity, a sophisticated DNA damage response (DDR) network is activated rapidly after DNA damage. Notably, the fundamental DDR mechanisms are conserved in eukaryotes. However, knowledge about many regulatory aspects of the plant DDR is still limited. Important, yet little understood, regulatory factors of the DDR are the long non-coding RNAs (lncRNAs). In humans, 13 lncRNAs functioning in DDR have been characterized to date, whereas no such lncRNAs have been characterized in plants yet. By meta-analysis, we identified the putative long intergenic non-coding RNA induced by DNA damage (LINDA) that responds strongly to various DNA double-strand break-inducing treatments, but not to replication stress induced by mitomycin C. After DNA damage, LINDA is rapidly induced in an ATM- and SOG1-dependent manner. Intriguingly, the transcriptional response of LINDA to DNA damage is similar to that of its flanking hypothetical protein-encoding gene. Phylogenetic analysis of putative Brassicales and Malvales LINDA homologs indicates that LINDA lncRNAs originate from duplication of a flanking small protein-encoding gene followed by pseudogenization. We demonstrate that LINDA is not only needed for the regulation of this flanking gene but also fine-tuning of the DDR after the occurrence of DNA double-strand breaks. Moreover, Δlinda mutant root stem cells are unable to recover from DNA damage, most likely due to hyper-induced cell death.

CRISPR-Cas technology secures sustainability through its applications: a review in green biotechnology

The CRISPR-Cas system's applications in biotechnology offer a promising avenue for addressing pressing global challenges, such as climate change, environmental pollution, the energy crisis, and the food crisis, thereby advancing sustainability. The ever-growing demand for food due to the projected population of around 9.6 billion by 2050 requires innovation in agriculture. CRISPR-Cas technology emerges as a powerful solution, enhancing crop varieties, optimizing yields, and improving resilience to stressors. It offers multiple gene editing, base editing, and prime editing, surpassing conventional methods. CRISPR-Cas introduces disease and herbicide resistance, high-yielding, drought-tolerant, and water-efficient crops to address rising water utilization and to improve the efficiency of agricultural practices which promise food sustainability and revolutionize agriculture for the benefit of future generations. The application of CRISPR-Cas technology extends beyond agriculture to address environmental challenges. With the adverse impacts of climate change and pollution endangering ecosystems, there is a growing need for sustainable solutions. The technology's potential in carbon capture and reduction through bio-sequestration is a pivotal strategy for combating climate change. Genomic advancements allow for the development of genetically modified organisms, optimizing biofuel and biomaterial production, and contributing to a renewable and sustainable energy future. This study reviews the multifaceted applications of CRISPR-Cas technology in the agricultural and environmental fields and emphasizes its potential to secure a sustainable future.

The multi-BRCT domain protein DDRM2 promotes the recruitment of RAD51 to DNA damage sites to facilitate homologous recombination

DNA double-strand breaks (DSBs) are the most toxic form of DNA damage in cells. Homologous recombination (HR) is an error-free repair mechanism for DSBs as well as a basis for gene targeting using genome-editing techniques. Despite the importance of HR, the HR mechanism in plants is poorly understood. Through genetic screens for DNA damage response mutants (DDRMs), we find that the Arabidopsis ddrm2 mutant is hypersensitive to DSB-inducing reagents. DDRM2 encodes a protein with four BRCA1 C-terminal (BRCT) domains and is highly conserved in plants including bryophytes, the earliest land plant lineage. The plant-specific transcription factor SOG1 binds to the promoter of DDRM2 and activates its expression. In consistence, the expression of DDRM2 is induced by DSBs in a SOG1-dependent manner. In support, genetic analysis suggests that DDRM2 functions downstream of SOG1. Similar to the sog1 mutant, the ddrm2 mutant shows dramatically reduced HR efficiency. Mechanistically, DDRM2 interacts with the core HR protein RAD51 and is required for the recruitment of RAD51 to DSB sites. Our study reveals that SOG1-DDRM2-RAD51 is a novel module for HR, providing a potential target for improving the efficiency of gene targeting.

Opening the door to nitrogen fixation in oxygenic phototrophs

Conveying biological nitrogen fixation (BNF) to photosynthetic species may be the next agricultural revolution, yet poses major engineering challenges. Liu et al. created a diazotrophic strain of a previously non-nitrogen-fixing species, the cyanobacterium Synechocystis sp. PCC 6803, and uncovered critical aspects of nitrogen fixation in an oxygenic species.

Applications of CRISPR/Cas genome editing in economically important fruit crops: recent advances and future directions

Fruit crops, consist of climacteric and non-climacteric fruits, are the major sources of nutrients and fiber for human diet. Since 2013, CRISPR/Cas (Clustered Regularly Interspersed Short Palindromic Repeats and CRISPR-Associated Protein) genome editing system has been widely employed in different plants, leading to unprecedented progress in the genetic improvement of many agronomically important fruit crops. Here, we summarize latest advancements in CRISPR/Cas genome editing of fruit crops, including efforts to decipher the mechanisms behind plant development and plant immunity, We also highlight the potential challenges and improvements in the application of genome editing tools to fruit crops, including optimizing the expression of CRISPR/Cas cassette, improving the delivery efficiency of CRISPR/Cas reagents, increasing the specificity of genome editing, and optimizing the transformation and regeneration system. In addition, we propose the perspectives on the application of genome editing in crop breeding especially in fruit crops and highlight the potential challenges. It is worth noting that efforts to manipulate fruit crops with genome editing systems are urgently needed for fruit crops breeding and demonstration.

Current and Prospective Applications of CRISPR-Cas12a in Pluricellular Organisms

CRISPR-Cas systems play a critical role in the prokaryotic adaptive immunity against mobile genetic elements, such as phages and foreign plasmids. In the last decade, Cas9 has been established as a powerful and versatile gene editing tool. In its wake, the novel RNA-guided endonuclease system CRISPR-Cas12a is transforming biological research due to its unique properties, such as its high specificity or its ability to target T-rich motifs, to induce staggered double-strand breaks and to process RNA arrays. Meanwhile, there is an increasing need for efficient and safe gene activation, repression or editing in pluricellular organisms for crop improvement, gene therapy, research model development, and other goals. In this article, we review CRISPR-Cas12a applications in pluricellular organisms and discuss how the challenges characteristic of these complex models, such as vectorization or temperature variations in ectothermic species, can be overcome.

Efficient Targeted Mutagenesis in Brassica Crops Using CRISPR/Cas Systems

CRISPR/Cas has been established for targeted mutagenesis in many plant species since 2013, including Brassica napus and Brassica oleracea. Since that time, improvements have been made in terms of efficiency and choice of CRISPR systems. This protocol encompasses improved Cas9 efficiency and an alternative Cas12a system, allowing more challenging and diverse editing outcomes to be achieved.

Insights into the molecular mechanisms of CRISPR/Cas9-mediated gene targeting at multiple loci in Arabidopsis

Homologous recombination-mediated gene targeting (GT) enables precise sequence knockin or sequence replacement, and thus is a powerful tool for heritable precision genome engineering. We recently established a clustered regularly interspaced short palindromic repeats/clustered regularly interspaced short palindromic repeats-associated protein 9 (CRISPR/Cas9)-mediated approach for heritable GT in Arabidopsis (Arabidopsis thaliana), but its broad utility was not tested, and the underlying molecular mechanism was unclear. Here, we achieved precise GT at 14 out of 27 tested endogenous target loci using the sequential transformation approach and obtained vector-free GT plants by backcrossing. Thus, the sequential transformation GT method provides a broadly applicable technology for precise genome manipulation. We show that our approach generates heritable GT in the egg cell or early embryo of T1 Arabidopsis plants. Analysis of imprecise GT events suggested that single-stranded transfer DNA (T-DNA)/VirD2 complexes produced during the Agrobacterium (Agrobacterium tumefaciens) transformation process may serve as the donor templates for homologous recombination-mediated repair in the GT process. This study provides new insights into the molecular mechanisms of CRISPR/Cas9-mediated GT in Arabidopsis.

Precision genome editing in plants using gene targeting and prime editing: existing and emerging strategies

Precise modification of plant genomes, such as seamless insertion, deletion, or replacement of DNA sequences at a predefined site, is a challenging task. Gene targeting (GT) and prime editing are currently the best approaches for this purpose. However, these techniques are inefficient in plants, which limits their applications for crop breeding programs. Recently, substantial developments have been made to improve the efficiency of these techniques in plants. Several strategies, such as RNA donor templating, chemically modified donor DNA template, and tandem-repeat homology-directed repair, are aimed at improving GT. Additionally, improved prime editing gRNA design, use of engineered reverse transcriptase enzymes, and splitting prime editing components have improved the efficacy of prime editing in plants. These emerging strategies and existing technologies are reviewed along with various perspectives on their future improvement and the development of robust precision genome editing technologies for plants.

Dissecting Plant Gene Functions Using CRISPR Toolsets for Crop Improvement

The CRISPR-based gene editing technology has become more and more powerful in genome manipulation for agricultural breeding, with numerous improved toolsets springing up. In recent years, many CRISPR toolsets for gene editing, such as base editors (BEs), CRISPR interference (CRISPRi), CRISPR activation (CRISPRa), and plant epigenetic editors (PEEs), have been developed to clarify gene function and full-level gene regulation. Here, we comprehensively summarize the application and capacity of the different CRISPR toolsets in the study of plant gene expression regulation, highlighting their potential application in gene regulatory networks' analysis. The general problems in CRISPR application and the optimal solutions in the existing schemes for high-throughput gene function analysis are also discussed. The CRISPR toolsets targeting gene manipulation discussed here provide new solutions for further genetic improvement and molecular breeding of crops.

Green Revolution to Gene Revolution: Technological Advances in Agriculture to Feed the World

Technological applications in agriculture have evolved substantially to increase crop yields and quality to meet global food demand. Conventional techniques, such as seed saving, selective breeding, and mutation breeding (variation breeding), have dramatically increased crop production, especially during the ‘Green Revolution’ in the 1990s. However, newer issues, such as limited arable lands, climate change, and ever-increasing food demand, pose challenges to agricultural production and threaten food security. In the following ‘Gene Revolution’ era, rapid innovations in the biotechnology field provide alternative strategies to further improve crop yield, quality, and resilience towards biotic and abiotic stresses. These innovations include the introduction of DNA recombinant technology and applications of genome editing techniques, such as transcription activator-like effector (TALEN), zinc-finger nucleases (ZFN), and clustered regularly interspaced short palindromic repeats/CRISPR associated (CRISPR/Cas) systems. However, the acceptance and future of these modern tools rely on the regulatory frameworks governing their development and production in various countries. Herein, we examine the evolution of technological applications in agriculture, focusing on the motivations for their introduction, technical challenges, possible benefits and concerns, and regulatory frameworks governing genetically engineered product development and production.

Enhancing HR Frequency for Precise Genome Editing in Plants

Gene-editing tools, such as Zinc-fingers, TALENs, and CRISPR-Cas, have fostered a new frontier in the genetic improvement of plants across the tree of life. In eukaryotes, genome editing occurs primarily through two DNA repair pathways: non-homologous end joining (NHEJ) and homologous recombination (HR). NHEJ is the primary mechanism in higher plants, but it is unpredictable and often results in undesired mutations, frameshift insertions, and deletions. Homology-directed repair (HDR), which proceeds through HR, is typically the preferred editing method by genetic engineers. HR-mediated gene editing can enable error-free editing by incorporating a sequence provided by a donor template. However, the low frequency of native HR in plants is a barrier to attaining efficient plant genome engineering. This review summarizes various strategies implemented to increase the frequency of HDR in plant cells. Such strategies include methods for targeting double-strand DNA breaks, optimizing donor sequences, altering plant DNA repair machinery, and environmental factors shown to influence HR frequency in plants. Through the use and further refinement of these methods, HR-based gene editing may one day be commonplace in plants, as it is in other systems.

CRISPR-Cas9-mediated chromosome engineering in Arabidopsis thaliana

The rise of the clustered regularly interspaced short palindromic repeats (CRISPR)-CRISPR-associated protein (Cas) system has made it possible to induce double-strand breaks at almost any desired target site in the genome. In plant somatic cells, double-strand breaks are predominantly repaired by the error-prone nonhomologous end-joining pathway, which can lead to mutations at the break site upon repair. So far, it had only been possible to induce genomic changes of up to a few hundred kilobases in plants utilizing this mechanism. However, by combining the highly efficient Staphylococcus aureus Cas9 (SaCas9) with an egg-cell-specific promoter to facilitate heritable mutations, chromosomal rearrangements in the Mb range, such as inversion and translocations, were obtained in Arabidopsis thaliana recently. Here we describe the chromosome-engineering protocol used to generate these heritable chromosomal rearrangements in A. thaliana. The protocol is based on Agrobacterium-mediated transformation of A. thaliana with transfer DNA constructs containing SaCas9, which is driven by an egg-cell-specific promoter, and two guide RNAs that have been preselected based on their cutting efficiency. In the T1 generation, primary transformants are selected and, if required, analyzed by Droplet Digital PCR and propagated. In the following generations, junction-specific PCR screenings are carried out until plants that carry the rearrangement homozygously are identified. Using this protocol, overall rearrangement frequencies range between 0.03% and 0.5%, depending on the type of rearrangement. In total, it takes about 1 year to establish homozygous lines.

An update on precision genome editing by homology-directed repair in plants

Beneficial alleles derived from local landraces or related species, or even orthologs from other plant species, are often caused by differences of one or several single-nucleotide polymorphisms or indels in either the promoter region or the encoding region of a gene and often account for major differences in agriculturally important traits. Clustered regularly interspaced short palindromic repeats-associated endonuclease Cas9 system (CRISPR/Cas9)-mediated precision genome editing enables targeted allele replacement or insertion of flag or foreign genes at specific loci via homology-directed repair (HDR); however, HDR efficiency is low due to the intrinsic rare occurrence of HDR and insufficient DNA repair template in the proximity of a double-stranded break (DSB). Precise replacement of the targeted gene with elite alleles from landraces or relatives into a commercial variety through genome editing has been a holy grail in the crop genome editing field. In this update, we briefly summarize CRISPR/Cas-mediated HDR in plants. We describe diverse strategies to improve HDR efficiency by manipulating the DNA repair pathway, timing DSB induction, and donor delivery, and so on. Lastly, we outline open questions and challenges in HDR-mediated precision genome editing in both plant biological research and crop improvement.

The heat is on: a simple method to increase genome editing efficiency in plants

BACKGROUND

Precision genome mutagenesis using CRISPR/Cas has become the standard method to generate mutant plant lines. Several improvements have been made to increase mutagenesis efficiency, either through vector optimisation or the application of heat stress.

RESULTS

Here, we present a simplified heat stress assay that can be completed in six days using commonly-available laboratory equipment. We show that three heat shocks (3xHS) efficiently increases indel efficiency of LbCas12a and Cas9, irrespective of the target sequence or the promoter used to express the nuclease. The generated indels are primarily somatic, but for three out of five targets we demonstrate that up to 25% more biallelic mutations are transmitted to the progeny when heat is applied compared to non-heat controls. We also applied our heat treatment to lines containing CRISPR base editors and observed a 22-27% increase in the percentage of C-to-T base editing. Furthermore, we test the effect of 3xHS on generating large deletions and a homologous recombination reporter. Interestingly, we observed no positive effect of 3xHS treatment on either approach using our conditions.

CONCLUSIONS

Together, our experiments show that heat treatment is consistently effective at increasing the number of somatic mutations using many CRISPR approaches in plants and in some cases can increase the recovery of mutant progeny.

Highly Efficient Genome Editing in Plant Protoplasts by Ribonucleoprotein Delivery of CRISPR-Cas12a Nucleases

Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR) mediated genome editing is a powerful approach for crop improvement. Traditional transformation methods based on plasmid delivery pose concerns associated with transgene integration and off-target effects. CRISPR delivered as ribonucleoproteins (RNPs) can prevent exogenous DNA integration, minimize off-target effects, and reduce cellular toxicity. Although RNP delivered CRISPR genome editing has been demonstrated in many plant species, optimization strategies that yield high editing efficiencies have not been thoroughly investigated. Using rice and citrus protoplast systems we demonstrated highly efficient genome editing using Cas12a delivered as RNPs. Four Cas12a variants, including LbCas12a, LbCas12a-E795L, AsCas12a, and AsCas12a Ultra, were investigated. Nearly 100% editing efficiency was observed for three out of four target sites by LbCas12a, LbCas12a-E795L, and AsCas12a Ultra, as measured by restriction fragment length polymorphism (RFLP) and verified by next generation sequencing of PCR amplicons. RNP delivery resulted in higher editing efficiencies than plasmid delivery at 32°C and 25°C. LbCas12a and LbCas12a-E795L demonstrated increased editing efficiencies in comparison to AsCas12a and AsCas12a Ultra, especially when used at lower RNP concentrations. In addition, we discovered that a 1:1 Cas12a:crRNA molar ratio is sufficient to achieve efficient genome editing. Nuclear localization signals (NLSs) are essential for efficient RNP-based genome editing. However, the different crRNA modifications tested did not significantly improve genome editing efficiency. Finally, we applied the Cas12a RNP system in citrus protoplasts and obtained similarly high editing efficiencies at the target site. Our study provides a comprehensive guideline for Cas12a-mediated genome editing using RNP delivery in plant cells, setting the foundation for the generation of transgene-free genome edited plants.

Demonstration of targeted crossovers in hybrid maize using CRISPR technology

Naturally occurring chromosomal crossovers (CO) during meiosis are a key driver of genetic diversity. The ability to target CO at specific allelic loci in hybrid plants would provide an advantage to the plant breeding process by facilitating trait introgression, and potentially increasing the rate of genetic gain. We present the first demonstration of targeted CO in hybrid maize utilizing the CRISPR Cas12a system. Our experiments showed that stable and heritable targeted CO can be produced in F1 somatic cells using Cas12a at a significantly higher rate than the natural CO in the same interval. Molecular characterization of the recombinant plants demonstrated that the targeted CO were driven by the non-homologous end joining (NHEJ) or HDR repair pathways, presumably during the mitotic cell cycle. These results are a step towards the use of RNA-guided nuclease technology to simplify the creation of targeted genome combinations in progeny and accelerate breeding.

Kouranov et al. demonstrate Cas12a-mediated targeted chromosomal crossover (CO) in transgenic hybrid maize plants and produce heritable crossover in F1 plants when Cas12a transgene is segregated away. The authors also report that the frequency of LbCas12a-mediated CO is higher than control natural CO in the same intervals in the progeny of 4 different events.

Recent Developments and Strategies for the Application of Agrobacterium-Mediated Transformation of Apple Malus × domestica Borkh

Genetic transformation has become an important tool in plant genome research over the last three decades. This applies not only to model plants such as Arabidopsis thaliana but also increasingly to cultivated plants, where the establishment of transformation methods could still pose many problems. One of such plants is the apple (Malus spp.), the most important fruit of the temperate climate zone. Although the genetic transformation of apple using Agrobacterium tumefaciens has been possible since 1989, only a few research groups worldwide have successfully applied this technology, and efficiency remains poor. Nevertheless, there have been some developments, especially in recent years, which allowed for the expansion of the toolbox of breeders and breeding researchers. This review article attempts to summarize recent developments in the Agrobacterium-mediated transformation strategies of apple. In addition to the use of different tissues and media for transformation, agroinfiltration, as well as pre-transformation with a Baby boom transcription factor are notable successes that have improved transformation efficiency in apple. Further, we highlight targeted gene silencing applications. Besides the classical strategies of RNAi-based silencing by stable transformation with hairpin gene constructs, optimized protocols for virus-induced gene silencing (VIGS) and artificial micro RNAs (amiRNAs) have emerged as powerful technologies for silencing genes of interest. Success has also been achieved in establishing methods for targeted genome editing (GE). For example, it was recently possible for the first time to generate a homohistont GE line into which a biallelic mutation was specifically inserted in a target gene. In addition to these methods, which are primarily aimed at increasing transformation efficiency, improving the precision of genetic modification and reducing the time required, methods are also discussed in which genetically modified plants are used for breeding purposes. In particular, the current state of the rapid crop cycle breeding system and its applications will be presented.

Tracing CRISPR/Cas12a Mediated Genome Editing Events in Apple Using High-Throughput Genotyping by PCR Capillary Gel Electrophoresis

The use of the novel CRISPR/Cas12a system is advantageous, as it expands the possibilities for genome editing (GE) applications due to its different features compared to the commonly used CRISPR/Cas9 system. In this work, the CRISPR/Cas12a system was applied for the first time to apple to investigate its general usability for GE applications. Efficient guide RNAs targeting different exons of the endogenous reporter gene MdPDS, whose disruption leads to the albino phenotype, were pre-selected by in vitro cleavage assays. A construct was transferred to apple encoding for a CRISPR/Cas12a system that simultaneously targets two loci in MdPDS. Using fluorescent PCR capillary electrophoresis and amplicon deep sequencing, all identified GE events of regenerated albino shoots were characterized as deletions. Large deletions between the two neighboring target sites were not observed. Furthermore, a chimeric composition of regenerates and shoots that exhibited multiple GE events was observed frequently. By comparing both analytical methods, it was shown that fluorescent PCR capillary gel electrophoresis is a sensitive high-throughput genotyping method that allows accurate predictions of the size and proportion of indel mutations for multiple loci simultaneously. Especially for species exhibiting high frequencies of chimerism, it can be recommended as a cost-effective method for efficient selection of homohistont GE lines.

Combined fluorescent seed selection and multiplex CRISPR/Cas9 assembly for fast generation of multiple Arabidopsis mutants

BACKGROUND

Multiplex CRISPR-Cas9-based genome editing is an efficient method for targeted disruption of gene function in plants. Use of CRISPR-Cas9 has increased rapidly in recent years and is becoming a routine method for generating single and higher order Arabidopsis thaliana mutants. Low entry, reliable assembly of CRISPR/Cas9 vectors and efficient mutagenesis is necessary to enable a maximum of researchers to break through the genetic redundancy within plant multi-gene families and allow for a plethora of gene function studies that have been previously unachievable. It will also allow routine de novo generation of mutations in ever more complex genetic backgrounds that make introgression of pre-existing alleles highly cumbersome.

RESULTS

To facilitate rapid and efficient use of CRISPR/Cas9 for Arabidopsis research, we developed a CRISPR/Cas9-based toolbox for generating mutations at multiple genomic loci, using two-color fluorescent seed selection. In our system, up-to eight gRNAs can be routinely introduced into a binary vector carrying either a FastRed, FastGreen or FastCyan fluorescent seed selection cassette. FastRed and FastGreen binary vectors can be co-transformed as a cocktail via floral dip to introduce sixteen gRNAs at the same time. The seeds can be screened either for red or green fluorescence, or for the presence of both colors. Importantly, in the second generation after transformation, Cas9 free plants are identified simply by screening the non-fluorescent seeds. Our collection of binary vectors allows to choose between two widely-used promoters to drive Cas enzymes, either the egg cell-specific (pEC1.2) from A. thaliana or the constitutive promoter from Petroselinum crispum (PcUBi4-2). Available enzymes are "classical" Cas9 codon-optimized for A. thaliana and a recently reported, intron-containing version of Cas9 codon-optimized for Zea mays, zCas9i. We observed the highest efficiency in producing knockout phenotypes by using intron-containing zCas9i driven under egg-cell specific pEC1.2 promoter. Finally, we introduced convenient restriction sites flanking promoter, Cas9 and fluorescent selection cassette in some of the T-DNA vectors, thus allowing straightforward swapping of all three elements for further adaptation and improvement of the system.

CONCLUSION

A rapid, simple and flexible CISPR/Cas9 cloning system was established that allows assembly of multi-guide RNA constructs in a robust and reproducible fashion, by avoiding generation of very big constructs. The system enables a flexible, fast and efficient screening of single or higher order A. thaliana mutants.

In-planta Gene Targeting in Barley Using Cas9 With and Without Geminiviral Replicons

Advances in the use of RNA-guided Cas9-based genome editing in plants have been rapid over the last few years. A desirable application of genome editing is gene targeting (GT), as it allows a wide range of precise modifications; however, this remains inefficient especially in key crop species. Here, we describe successful, heritable gene targeting in barley at the target site of Cas9 using an in-planta strategy but fail to achieve the same using a wheat dwarf virus replicon to increase the copy number of the repair template. Without the replicon, we were able to delete 150 bp of the coding sequence of our target gene whilst simultaneously fusing in-frame mCherry in its place. Starting from 14 original transgenic plants, two plants appeared to have the required gene targeting event. From one of these T0 plants, three independent gene targeting events were identified, two of which were heritable. When the replicon was included, 39 T0 plants were produced and shown to have high copy numbers of the repair template. However, none of the 17 lines screened in T1 gave rise to significant or heritable gene targeting events despite screening twice the number of plants in T1 compared with the non-replicon strategy. Investigation indicated that high copy numbers of repair template created by the replicon approach cause false-positive PCR results which are indistinguishable at the sequence level to true GT events in junction PCR screens widely used in GT studies. In the successful non-replicon approach, heritable gene targeting events were obtained in T1, and subsequently, the T-DNA was found to be linked to the targeted locus. Thus, physical proximity of target and donor sites may be a factor in successful gene targeting.

Efficient and Economical Targeted Insertion in Plant Genomes via Protoplast Regeneration

Versatile genome editing can be facilitated by the insertion of DNA sequences into specific locations. Current protocols involving CRISPR and Cas proteins rely on low efficiency homology-directed repair or non-homologous end joining with modified double-stranded DNA oligonucleotides as donors. Our simple protocol eliminates the need for expensive equipment, chemical and enzymatic donor DNA modification, or plasmid construction by using polyethylene glycol-calcium to deliver non-modified single-stranded DNA oligonucleotides and CRISPR-Cas9 ribonucleoprotein into protoplasts. Plants regenerated via edited protoplasts achieved targeted insertion frequencies of up to 50% in Nicotiana benthamiana and 13.6% in rapid cycling Brassica oleracea without antibiotic selection. Using a 60 nt donor containing 27 nt in each homologous arm, 6/22 regenerated N. benthamiana plants showed targeted insertions, and one contained a precise insertion of a 6 bp HindIII site. The inserted sequences were transmitted to the next generation and invite the possibility of future exploration of versatile genome editing by targeted DNA insertion in plants.

Pith-specific lignification in Nicotiana attenuata as a defense against a stem-boring herbivore

Plants have developed tissue-specific defense strategies in response to various herbivores with different feeding habits. Although defense responses to leaf-chewing insects have been well studied, little is known about stem-specific responses, particularly in the pith, to stem-boring herbivores. To understand the stem-specific defense, we first conducted a comparative transcriptomic analysis of the wild tobacco Nicotiana attenuata before and after attack by the leaf-chewing herbivore Manduca sexta and the stem borer Trichobaris mucorea. When the stem-boring herbivore attacked, lignin-associated genes were upregulated specifically in the inner parenchymal cells of the stem, the pith; lignin also accumulated highly in the attacked pith. Silencing the lignin biosynthetic gene cinnamyl alcohol dehydrogenase enhanced the performance of the stem-boring herbivore but had no effect on the growth of the leaf-chewing herbivore. Two-dimensional nuclear magnetic resonance results revealed that lignified pith contains feruloyltyramine as an unusual lignin component in the cell wall, as a response against stem-boring herbivore attack. Pith-specific lignification induced by the stem-boring herbivore was modulated by both jasmonate and ethylene signaling. These results suggest that lignin provides a stem-specific inducible barrier, protecting plants against stem-boring insects.

Gene Targeting Facilitated by Engineered Sequence-Specific Nucleases: Potential Applications for Crop Improvement

Humans are currently facing the problem of how to ensure that there is enough food to feed all of the world's population. Ensuring that the food supply is sufficient will likely require the modification of crop genomes to improve their agronomic traits. The development of engineered sequence-specific nucleases (SSNs) paved the way for targeted gene editing in organisms, including plants. SSNs generate a double-strand break (DSB) at the target DNA site in a sequence-specific manner. These DSBs are predominantly repaired via error-prone non-homologous end joining and are only rarely repaired via error-free homology-directed repair if an appropriate donor template is provided. Gene targeting (GT), i.e. the integration or replacement of a particular sequence, can be achieved with combinations of SSNs and repair donor templates. Although its efficiency is extremely low, GT has been achieved in some higher plants. Here, we provide an overview of SSN-facilitated GT in higher plants and discuss the potential of GT as a powerful tool for generating crop plants with desirable features.

Novel CRISPR/Cas applications in plants: from prime editing to chromosome engineering

In the last years, tremendous progress has been made in the development of CRISPR/Cas-mediated genome editing tools. A number of natural CRISPR/Cas nuclease variants have been characterized. Engineered Cas proteins have been developed to minimize PAM restrictions, off-side effects and temperature sensitivity. Both kinds of enzymes have, by now, been applied widely and efficiently in many plant species to generate either single or multiple mutations at the desired loci by multiplexing. In addition to DSB-induced mutagenesis, specifically designed CRISPR/Cas systems allow more precise gene editing, resulting not only in random mutations but also in predefined changes. Applications in plants include gene targeting by homologous recombination, base editing and, more recently, prime editing. We will evaluate these different technologies for their prospects and practical applicability in plants. In addition, we will discuss a novel application of the Cas9 nuclease in plants, enabling the induction of heritable chromosomal rearrangements, such as inversions and translocations. This technique will make it possible to change genetic linkages in a programmed way and add another level of genome engineering to the toolbox of plant breeding. Also, strategies for tissue culture free genome editing were developed, which might be helpful to overcome the transformation bottlenecks in many crops. All in all, the recent advances of CRISPR/Cas technology will help agriculture to address the challenges of the twenty-first century related to global warming, pollution and the resulting food shortage.

Efficient gene targeting in Nicotiana tabacum using CRISPR/SaCas9 and temperature tolerant LbCas12a

Nicotiana tabacum is a non-food herb that has the potential to be utilized as bio-factory for generating medicines, vaccines or valuable small metabolites. To achieve these goals, the improvement of genetic tools for pre-designed genome modifications is indispensable. The development of CRISPR/Cas nucleases allows the induction of site-specific double-strand breaks to enhance homologous recombination-mediated gene targeting (GT). However, the efficiency of GT is still a challenging obstacle for many crops including tobacco. Recently, studies in several plant species indicated that by replacing SpCas9 with other CRISPR/Cas-based nucleases, GT efficiencies might be enhanced considerably. Therefore, we tested SaCas9 as well as a temperature-insensitive version of LbCas12a (ttLbCas12a) for targeting the tobacco SuRB gene. At the same time, we also optimized the protocol for Agrobacterium-mediated tobacco transformation and tissue culture. In this way, we could improve GT efficiencies to up to a third of the inoculated cotyledons when using ttLbCas12a, which outperformed SaCas9 considerably. In addition, we could show that the conversion tract length of the GT reaction can be up to 606 bp long and in the majority of cases, it is longer than 250 bp. We obtained multiple heritable GT events, mostly heterozygous, but also biallelic GT events and some without T-DNA integration. Thus, we were not only able to obtain CRISPR/Cas-based heritable GT events in allotetraploid Nicotiana tabacum for the first time, but our results also indicate that ttLbCas12a might be a superior alternative for gene editing and GT in tobacco as well as in other crops.

Genome editing in plants with MAD7 nuclease

MAD7 is an engineered nuclease of the Class 2 type V-A CRISPR-Cas (Cas12a/Cpf1) family with a low level of homology to canonical Cas12a nucleases. It has been publicly released as a royalty-free nuclease for both academic and commercial use. Here, we demonstrate that the CRISPR-MAD7 system can be used for genome editing and recognizes T-rich PAM sequences (YTTN) in plants. Its editing efficiency in rice and wheat is comparable to that of the widely used CRISPR-LbCas12a system. We develop two variants, MAD7-RR and MAD7-RVR that increase the target range of MAD7, as well as an M-AFID (a MAD7-APOBEC fusion-induced deletion) system that creates predictable deletions from 5'-deaminated Cs to the MAD7-cleavage site. Moreover, we show that MAD7 can be used for multiplex gene editing and that it is effective in generating indels when combined with other CRISPR RNA orthologs. Using the CRISPR-MAD7 system, we have obtained regenerated mutant rice and wheat plants with up to 65.6% efficiency.

Sequence modification on demand: search and replace tools for precise gene editing in plants

Until recently, our ability to generate allelic diversity in plants was limited to introduction of variants from domesticated and wild species by breeding via uncontrolled recombination or the use of chemical and physical mutagens-processes that are lengthy and costly or lack specificity, respectively. Gene editing provides a faster and more precise way to create new variation, although its application in plants has been dominated by the creation of short insertion and deletion mutations leading to loss of gene function, mostly due to the dependence of editing outcomes on DNA repair pathway choices intrinsic to higher eukaryotes. Other types of edits such as point mutations and precise and pre-designed targeted sequence insertions have rarely been implemented, despite providing means to modulate the expression of target genes or to engineer the function and stability of their protein products. Several advancements have been developed in recent years to facilitate custom editing by regulation of repair pathway choices or by taking advantage of alternative types of DNA repair. We have seen the advent of novel gene editing tools that are independent of DNA double-strand break repair, and methods completely independent of host DNA repair processes are being increasingly explored. With the aim to provide a comprehensive review of the state-of-the-art methodology for allele replacement in plants, I discuss the adoption of these improvements for plant genome engineering.

A Cas12a-based gene editing system for Phytophthora infestans reveals monoallelic expression of an elicitor

Phytophthora infestans is a destructive pathogen of potato and a model for investigations of oomycete biology. The successful application of a CRISPR gene editing system to P. infestans is so far unreported. We discovered that it is difficult to express CRISPR/Cas9 but not a catalytically inactive form in transformants, suggesting that the active nuclease is toxic. We were able to achieve editing with CRISPR/Cas12a using vectors in which the nuclease and its guide RNA were expressed from a single transcript. Using the elicitor gene Inf1 as a target, we observed editing of one or both alleles in up to 13% of transformants. Editing was more efficient when guide RNA processing relied on the Cas12a direct repeat instead of ribozyme sequences. INF1 protein was not made when both alleles were edited in the same transformant, but surprisingly also when only one allele was altered. We discovered that the isolate used for editing, 1306, exhibited monoallelic expression of Inf1 due to insertion of a copia-like element in the promoter of one allele. The element exhibits features of active retrotransposons, including a target site duplication, long terminal repeats, and an intact polyprotein reading frame. Editing occurred more often on the transcribed allele, presumably due to differences in chromatin structure. The Cas12a system not only provides a tool for modifying genes in P. infestans, but also for other members of the genus by expanding the number of editable sites. Our work also highlights a natural mechanism that remodels oomycete genomes.

Targeted DNA insertion in plants

Conventional methods of DNA sequence insertion into plants, using Agrobacterium-mediated transformation or microprojectile bombardment, result in the integration of the DNA at random sites in the genome. These plants may exhibit altered agronomic traits as a consequence of disruption or silencing of genes that serve a critical function. Also, genes of interest inserted at random sites are often not expressed at the desired level. For these reasons, targeted DNA insertion at suitable genomic sites in plants is a desirable alternative. In this paper we review approaches of targeted DNA insertion in plant genomes, discuss current technical challenges, and describe promising applications of targeted DNA insertion for crop genetic improvement.

Expanding the scope of plant genome engineering with Cas12a orthologs and highly multiplexable editing systems

CRISPR-Cas12a is a promising genome editing system for targeting AT-rich genomic regions. Comprehensive genome engineering requires simultaneous targeting of multiple genes at defined locations. Here, to expand the targeting scope of Cas12a, we screen nine Cas12a orthologs that have not been demonstrated in plants, and identify six, ErCas12a, Lb5Cas12a, BsCas12a, Mb2Cas12a, TsCas12a and MbCas12a, that possess high editing activity in rice. Among them, Mb2Cas12a stands out with high editing efficiency and tolerance to low temperature. An engineered Mb2Cas12a-RVRR variant enables editing with more relaxed PAM requirements in rice, yielding two times higher genome coverage than the wild type SpCas9. To enable large-scale genome engineering, we compare 12 multiplexed Cas12a systems and identify a potent system that exhibits nearly 100% biallelic editing efficiency with the ability to target as many as 16 sites in rice. This is the highest level of multiplex edits in plants to date using Cas12a. Two compact single transcript unit CRISPR-Cas12a interference systems are also developed for multi-gene repression in rice and Arabidopsis. This study greatly expands the targeting scope of Cas12a for crop genome engineering.

Can genetic engineering-based methods for gene function identification be eclipsed by genome editing in plants? A comparison of methodologies

Finding and explaining the functions of genes in plants have promising applications in crop improvement and bioprospecting and hence, it is important to compare various techniques available for gene function identification in plants. Today, the most popular technology among researchers to identify the functions of genes is the clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR associated protein 9 (Cas9)-based genome editing method. But by no means can we say that CRISPR/Cas9 is the go-to method for all purposes. It comes with its own baggage. Researchers will agree and have lived through at least seven more technologies deployed to find the functions of genes, which come under three umbrellas: 1. genetic engineering, 2. transient expression, and 3. chemical/physical mutagenesis. Each of the methods evolved when the previous one ran into an insurmountable problem. In this review, we compare the eight technologies against one another on 14 parameters. This review lays bare the pros and cons, and similarities and dissimilarities of various methods. Every method comes with its advantages and disadvantages. For example, the CRISPR/Cas9-based genome editing is an excellent method for modifying gene sequences, creating allelic versions of genes, thereby aiding the understanding of gene function. But it comes with the baggage of unwanted or off-target mutations. Then, we have methods based on random or targeted knockout of the gene, knockdown, and overexpression of the gene. Targeted disruption of genes is required for complete knockout of gene function, which may not be accomplished by editing. We have also discussed the strategies to overcome the shortcomings of the targeted gene-knockout and the CRISPR/Cas9-based methods. This review serves as a comprehensive guide towards the understanding and comparison of various technologies available for gene function identification in plants and hence, it will find application for crop improvement and bioprospecting related research.

Genome engineering for crop improvement and future agriculture

Feeding the ever-growing population is a major challenge, especially in light of rapidly changing climate conditions. Genome editing is set to revolutionize plant breeding and could help secure the global food supply. Here, I review the development and application of genome editing tools in plants while highlighting newly developed techniques. I describe new plant breeding strategies based on genome editing and discuss their impact on crop production, with an emphasis on recent advancements in genome editing-based plant improvements that could not be achieved by conventional breeding. I also discuss challenges facing genome editing that must be overcome before realizing the full potential of this technology toward future crops and food production.

Sophisticated CRISPR/Cas tools for fine-tuning plant performance

Over the last years, the discovery of various natural and the development of a row of engineered CRISPR/Cas nucleases have made almost every site of plant genomes accessible for the induction of specific changes. Newly developed tools open up a wide range of possibilities for the induction of genetic variability, from changing a single bp to Mbps, and thus to fine-tune plant performance. Whereas early approaches focused on targeted mutagenesis, recently developed tools enable the induction of precise and predefined genomic modifications. The use of base editors allows the substitution of single nucleotides, whereas the use of prime editors and gene targeting methods enables the induction of larger sequence modifications from a few bases to several kbp. Recently, through CRISPR/Cas-mediated chromosome engineering, it became possible to induce heritable inversions and translocations in the Mbp range. Thus, a novel way of breaking and fixing genetic linkages has come into reach for breeders. In addition, sequence-specific recruitment of various factors involved in transcriptional and post-transcriptional regulation has been shown to provide an additional class of methods for the fine tuning of plant performance. In this review, we provide an overview of the most recent progress in the field of CRISPR/Cas-based tool development for plant genome engineering and try to evaluate the importance of these developments for breeding and biotechnological applications.

CRISPR/Cas genome editing to optimize pharmacologically active plant natural products

Since time immemorial, human use medicinal plants as sources of food, therapy and industrial purpose. Classical biotechnology and recent next-generation sequencing (NGS) techniques have been successfully used to optimize plant-derived natural-products of biomedical significance. Earlier, protein based editing tools viz. zinc-finger nucleases (ZFNs) and transcription activator-like endonucleases (TALENs) have been popularized for transcriptional level genome manipulation. Clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated9 (Cas9) endonuclease system is an efficient, robust and selective site-directed mutagenesis strategy for RNA-guided genome-editing. CRISPR/Cas9 genome-editing tool employs designed guide-RNAs that identifies a 3 base-pair protospacer adjacent motif (PAM) sequence occurring downstream of the target-DNA. The present review comprehensively complies the recent literature (2010-2020) retrieved from scientific-databases on the application of CRISPR/Cas9-editing-tools as potent genome-editing strategies in medicinal-plants discussing the recent developments, challenges and future-perspectives with notes on broader applicability of the technique in plants and lower-organisms. In plants, CRISPR/Cas-editing has been implemented successfully in relation to crop-yield and stress-tolerance. However, very few medicinal plants have been edited using CRISPR/Cas genome tool owing to the lack of whole-genome and mRNA-sequences and shortfall of suitable transformation and regeneration strategies. However, recently a number of plant secondary metabolic-pathways (viz. alkaloid, terpenoid, flavonoids, phenolic, saponin etc.) have been engineered employing CRISPR/Cas-editing via knock-out, knock-in, point-mutation, fine-tuning of gene-expression and targeted-mutagenesis. This genome-editing tool further extends its applicability incorporating the tools of synthetic- and systems-biology, functional-genomics and NGS to produce genetically-engineered medicinal-crops with advanced-traits facilitating the production of pharmaceuticals and nutraceuticals.

Efficient Genome Editing in Populus Using CRISPR/Cas12a

The ability to create targeted mutations using clustered regularly inter-spaced short palindromic repeats (CRISPR)/CRISPR-associated (Cas) 9 in support of forest tree biotechnology is currently limited. CRISPR/Cas12a is a novel CRISPR effector protein that not only broadens the CRISPR/Cas targeting range but also enables the generation of large-fragment deletions. In this study, a CRISPR/Cas12a system was evaluated for the induction of targeted mutations in the woody tree poplar (Populus alba × Populus glandulosa). Three Cas12a nucleases, namely, AsCas12a (Acidaminococcus sp. BV3L6), LbCas12a (Lachnospiraceae bacterium ND2006), and FnCas12a (Francisella tularensis subsp. novicidain U112), were used. We knocked out multiple targets of the phytoene desaturase gene 8 (PDS) using the CRISPR/Cas12a genome-targeting system, and the results indicated that the AsCas12a system is the most efficient. We further optimized the co-cultivation temperature after Agrobacterium-mediated transformation from 22 to 28°C to increase the Cas12a nuclease editing efficiency in poplar. AsCas12a showed the highest mutation efficiency, at 70%, and the majority of editing sites were composed of large-fragment deletions. By using this simple and high-efficiency CRISPR/Cas12a system, multiple targets can be modified to obtain multigene simultaneous knockout mutants in tree species, which will provide powerful tools with which to facilitate genetic studies of forest trees.

CRISPR-Cas12a (Cpf1): A Versatile Tool in the Plant Genome Editing Tool Box for Agricultural Advancement

Global population is predicted to approach 10 billion by 2050, an increase of over 2 billion from today. To meet the demands of growing, geographically and socio-economically diversified nations, we need to diversity and expand agricultural production. This expansion of agricultural productivity will need to occur under increasing biotic, and environmental constraints driven by climate change. Clustered regularly interspaced short palindromic repeats-site directed nucleases (CRISPR-SDN) and similar genome editing technologies will likely be key enablers to meet future agricultural needs. While the application of CRISPR-Cas9 mediated genome editing has led the way, the use of CRISPR-Cas12a is also increasing significantly for genome engineering of plants. The popularity of the CRISPR-Cas12a, the type V (class-II) system, is gaining momentum because of its versatility and simplified features. These include the use of a small guide RNA devoid of trans-activating crispr RNA, targeting of T-rich regions of the genome where Cas9 is not suitable for use, RNA processing capability facilitating simpler multiplexing, and its ability to generate double strand breaks (DSB) with staggered ends. Many monocot and dicot species have been successfully edited using this Cas12a system and further research is ongoing to improve its efficiency in plants, including improving the temperature stability of the Cas12a enzyme, identifying new variants of Cas12a or synthetically producing Cas12a with flexible PAM sequences. In this review we provide a comparative survey of CRISPR-Cas12a and Cas9, and provide a perspective on applications of CRISPR-Cas12 in agriculture.

Using CRISPR/ttLbCas12a for in planta Gene Targeting in A. thaliana

CRISPR/Cas systems enable gene editing through the induction of site-specific DNA double-strand breaks (DSB). However, the nature of the induced modification highly depends on the mechanism used for DNA DSB repair. Non-homologous end joining (NHEJ)-mediated targeted mutagenesis induced by CRISPR/Cas is an already standardly applied tool, which can lead to various different kinds of mutations at a specific genomic site. Nevertheless, precise genome modification using homologous donor sequences is still challenging in plants. Applications depending on the less frequent homologous recombination (HR) require further improvements to create an attractive and efficient tool for general application in plants. Focusing on this issue, we developed the in planta gene targeting (ipGT) system, which is based on the simultaneous excision of a stably integrated, homologous donor sequence and the induction of a DSB within the target site. In recent years, several improvements were achieved enhancing gene targeting (GT) frequencies. After the successful application of Streptococcus pyogenes Cas9 (SpCas9) and Staphylococcus aureus Cas9 (SaCas9) for ipGT, we were able to further improve the system using Lachnospiraceae bacterium Cas12a (LbCas12a), which also enables cleavage in T-rich regions. Most recently, we tested an improved, temperature-tolerant version of LbCas12a (ttLbCas12a) for ipGT and were able to further increase GT efficiencies. Here, we describe the experimental procedure of the recently published ipGT system using ttLbCas12a in Arabidopsis thaliana in detail. © 2020 The Authors. Basic Protocol 1: Construction of CRISPR/ttLbCas12a expression vector to analyze ipGT efficiencies Basic Protocol 2: Achieving heritable GT plants.

Efficient Gene Targeting in Maize Using Inducible CRISPR-Cas9 and Marker-free Donor Template

CRISPR-Cas9 is a powerful tool for generating targeted mutations and genomic deletions. However, precise gene insertion or sequence replacement remains a major hurdle before application of CRISPR-Cas9 technology is fully realized in plant breeding. Here, we report high-frequency, selectable marker-free intra-genomic gene targeting (GT) in maize. Heat shock-inducible Cas9 was used for generating targeted double-strand breaks and simultaneous mobilization of the donor template from pre-integrated T-DNA. The construct was designed such that release of the donor template and subsequent DNA repair activated expression of the selectable marker gene within the donor locus. This approach generated up to 4.7% targeted insertion of the donor sequence into the target locus in T0 plants, with up to 86% detected donor template release and 99% mutation rate being observed at the donor loci and the genomic target site, respectively. Unlike previous in planta or intra-genomic homologous recombination reports in which the original chimeric GT plants required extensive progeny screening in the next generation to identify non-chimeric GT individuals, our method provides non-chimeric heritable GT in one generation.

Can We Use Gene-Editing to Induce Apomixis in Sexual Plants?

Apomixis, the asexual formation of seeds, is a potentially valuable agricultural trait. Inducing apomixis in sexual crop plants would, for example, allow breeders to fix heterosis in hybrid seeds and rapidly generate doubled haploid crop lines. Molecular models explain the emergence of functional apomixis, i.e., apomeiosis + parthenogenesis + endosperm development, as resulting from a combination of genetic or epigenetic changes that coordinate altered molecular and developmental steps to form clonal seeds. Apomixis-like features and synthetic clonal seeds have been induced with limited success in the sexual plants rice and maize by using gene editing to mutate genes related to meiosis and fertility or via egg-cell specific expression of embryogenesis genes. Inducing functional apomixis and increasing the penetrance of apomictic seed production will be important for commercial deployment of the trait. Optimizing the induction of apomixis with gene editing strategies that use known targets as well as identifying alternative targets will be possible by better understanding natural genetic variation in apomictic species. With the growing availability of genomic data and precise gene editing tools, we are making substantial progress towards engineering apomictic crops.