Commercially available blood storage containers

Evaluation of activation characteristics of a canine platelet concentrate produced by a commercial double centrifugation system

Introduction

In veterinary medicine there are few readily available products for platelet transfusion to patients with thrombocytopenia. Commercial tabletop platelet concentrating systems have recently become available to veterinarians, primarily directed towards uses associated with regenerative medicine. These systems could potentially be used to produce fresh concentrated platelets for use in transfusion medicine. This study evaluated the concentration, activation, and sterility of a double centrifugation platelet concentrate (PC) produced by a commercial benchtop system.

Methods

Ten healthy dogs were studied. Whole blood was collected and mixed with ACD-A in a 1:7.6 ratio of ACD-A to whole blood. 12 mL of this mixture was processed into PC via single centrifugation, while 60 mL of the anticoagulated whole blood was processed via a commercial double centrifugation system. Both types of PC were evaluated for platelet concentration, CD62P expression with and without thrombin stimulation, and for sterility.

Results

Mean platelet count in the double centrifuged PC was 863 ± 352 × 103/μL, with very low white blood cell contamination (median of 0.47 × 103 leukocyte/μL (range 0.15-2.18 × 103/μL)). The double-centrifuged PC had similar baseline activation characteristics (as determined by P-selectin expression) as the single centrifuge PC (0.76% vs. 0.72% unstimulated, 30.5% vs. 34.9% stimulated, p = 0.432).

Discussion

The benchtop PC system studied here did not cause activation of platelets during production and produced a sterile product that can be further investigated as a source of fresh platelet concentrates for transfusion purposes.

Understanding interactions of plasticisers with a phospholipid monolayer

The use of DEHP (diethylhexyl phthalate) is now banned for most applications in Europe; the exception is for blood bags, where its toxicity is overshadowed by its ability to extend the storage life of red blood cells. Another plasticiser, BTHC (butanoyl trihexyl citrate), is used in paediatric blood bags but does not stabilise blood cells as effectively. Interactions between plasticisers and lipids are investigated with a phospholipid, DMPC, to understand the increased stability of blood cells in the presence of DEHP as well as bioaccumulation and identify differences with BTHC. Mixed monolayers of DMPC and DEHP or BTHC were studied on Langmuir troughs where surface pressure/area isotherms can be measured. Neutron reflection measurements were made to determine the composition and structure of these mixed layers. A large amount of plasticiser can be incorporated into a DMPC monolayer but once an upper limit is reached, plasticiser is selectively removed from the interface at high surface pressures. The upper limit is found to occur between 40-60 mol% for DEHP and 20-40 mol% for BTHC. The areas per molecule are also different with DEHP being in the range of 50-100 Å2 and BTHC being 65-120 Å2. Results indicate that BTHC does not fit as well as DEHP in DMPC monolayers which could help explain the differences observed with regards to the stability of blood cells.

The effects of pen ink and surface disinfectants on red blood cells stored in plasticized polyvinylchloride transfusion bags

BACKGROUND

Each unit of red blood cells (RBCs) produced represents a significant cost to the healthcare system. Unnecessary blood wastage should be minimized. In clinical settings, alterations to blood component bags after issue from the protected setting of the blood bank include pen markings, and those that are exposed to an infectious environment require surface disinfecting. These units may be discarded due to unclear effects on RBC quality. In this study, we investigate whether pen markings or surface disinfection negatively affects the quality of packed RBCs and whether pen ink diffuses through the blood bag.

STUDY DESIGN AND METHODS

RBC bags were marked with pens (water, oil, or alcohol-based) or subjected to surface disinfection (ethanol, hydrogen peroxide [Preempt wipes], or benzalkonium chloride-based wipes [CaviWipes]) and sampled 24 h after applying the treatment and at day 42 post collection (n = 3 for each condition). The samples were analyzed for RBC in vitro quality markers. The presence of any ink in the RBC bags was investigated using mass spectrometry (n = 2).

RESULTS

Data from 24 h and day 42 time points indicated no differences in RBC count, mean corpuscular volume, morphology, deformability, potassium content, or hemolysis for either pen markings or disinfectants when compared with their untreated controls (p > .05). No trace of ink was detected inside the bag.

CONCLUSION

RBC units marked with ballpoint, gel, or Sharpie pens do not suffer a loss of in vitro quality, nor do RBC units which have been surface disinfected with 70% ethanol, Preempt wipes or CaviWipes.

Evidence for the cardiodepressive effects of the plasticizer di-2-ethylhexyl phthalate

Di-2-ethylhexyl phthalate (DEHP) is commonly used in the manufacturing of plastic materials, including intravenous bags, blood storage bags, and medical-grade tubing. DEHP can leach from plastic medical products, which can result in inadvertent patient exposure. DEHP concentrations were measured in red blood cell units stored between 7 and 42 days (17-119 μg/ml). Using these concentrations as a guide, Langendorff-perfused rat heart preparations were acutely exposed to DEHP. Sinus activity remained stable with lower doses of DEHP (25-50 μg/ml), but sinus rate declined by 43% and sinus node recovery time (SNRT) prolonged by 56.5% following 30-min exposure to 100 μg/ml DEHP. DEHP exposure also exerted a negative dromotropic response, as indicated by a 69.4% longer PR interval, 108.5% longer Wenckebach cycle length (WBCL), and increased incidence of atrioventricular (AV) uncoupling (60-min exposure). Pretreatment with doxycycline partially rescued the effects of DEHP on sinus activity, but did not ameliorate the effects on AV conduction. DEHP exposure also prolonged the ventricular action potential and effective refractory period, but had no measurable effect on intracellular calcium transient duration. Follow-up studies using human-induced pluripotent stem cell-derived cardiomyocytes confirmed that DEHP slows electrical conduction in a time (15 min-3 h) and dose-dependent manner (10-100 μg/ml). Previous studies have suggested that phthalate toxicity is specifically attributed to metabolites of DEHP, including mono-2-ethylhexylphthalate. This study demonstrates that DEHP exposure also contributes to cardiac dysfunction in a dose- and time-dependent manner. Future work is warranted to investigate the impact of DEHP (and its metabolites) on human health, with special consideration for clinical procedures that employ plastic materials.

Evidence for the cardiodepressive effects of the plasticizer di-2-ethylhexylphthalate (DEHP)

Di-2-ethylhexylphthalate (DEHP) is commonly used in the manufacturing of plastic materials, including intravenous bags, blood storage bags, and medical-grade tubing. DEHP can leach from plastic medical products, which can result in inadvertent patient exposure. DEHP concentrations were measured in red blood cell (RBC) units stored between 7-42 days (23-119 μg/mL). Using these concentrations as a guide, Langendorff-perfused rat heart preparations were acutely exposed to DEHP. Sinus activity remained stable with lower doses of DEHP (25-50 μg/mL), but sinus rate declined by 43% and sinus node recovery time prolonged by 56.5% following 30-minute exposure to 100 μg/ml DEHP. DEHP exposure also exerted a negative dromotropic response, as indicated by a 69.4% longer PR interval, 108.5% longer Wenckebach cycle length, and increased incidence of atrioventricular uncoupling. Pretreatment with doxycycline partially rescued the effects of DEHP on sinus activity, but did not ameliorate the effects on atrioventricular conduction. DEHP exposure also prolonged the ventricular action potential and effective refractory period, but had no measurable effect on intracellular calcium transient duration. Follow-up studies using hiPSC-CM confirmed that DEHP slows electrical conduction in a time (15 min - 3 hours) and dose-dependent manner (10-100 μg/mL). Previous studies have suggested that phthalate toxicity is specifically attributed to metabolites of DEHP, including mono-2-ethylhexyl phthalate (MEHP). This study demonstrates that DEHP exposure also contributes to cardiac dysfunction in a dose- and time-dependent manner. Future work is warranted to investigate the impact of DEHP (and its metabolites) on human health, with special consideration for clinical procedures that employ plastic materials.

Shelf-life, bioburden, water and oxygen permeability studies of laser welded SEBS/PP blended polymer

The most common material used for blood bags is PVC, which requires the addition of DEHP to increase its flexibility. DEHP is known to cross the polymer barrier and move into the stored blood and, ultimately, the patient's bloodstream. In this work, an alternative prototype composed of SEBS/PP was fabricated through blow-moulding and compared with the commercially available PVC-based blood bag which was designated as the control. The blow-moulded sample layers were welded together using CO2 lasers and optimized to obtain complete sealing of the sides. The samples' performance characteristics were analyzed using water permeability, oxygen permeability, shelf-life, and bioburden tests. The SEBS/PP sample exhibited the highest oxygen permeability rate of 1486.6 cc/m2/24 h after 40 days of ageing, indicating that the sample is conducive for red blood cell (RBC) respiration. On the other hand, the SEBS/PP sample showcased a lower water permeability rate of 0.098 g/h m2 after 40 days of aging, indicating a high-water barrier property and thus preventing water loss during storage. In comparison, the oxygen and water permeability rates of PVC-DEHP were found to be distinctly lower in performance (662.7 cc/m2/24 h and 0.221 g/h m2, respectively). In addition, shelf-life analyses revealed that after 40 days of ageing, polymer samples exhibited no visual damage or degradation. The optimal parameters to obtain adequate welding of the SEBS/PP were determined to be power of 60% (18 W), speed of 70 in/sec and 500 Pulse Per Inch (PPI). Furthermore, the bioburden estimates of SEBS/PP of 115 CFU are markedly lower compared to the bioburden estimate of PVC-DEHP of 213 CFU. The SEBS/PP prototype can potentially be an effective alternative to PVC-based blood bags, particularly for high-risk patients in order to reduce the likelihood of medical issues.

Platelet storage: Progress so far

There is a crucial need for platelet transfusion during an emergency-surgery and treatment of platelet disorders. The unavailability of donors has furthermore increased the demand for platelet storage. Platelets have limited shelf life due to bacterial contamination and storage lesions. Temperature, materials, oxygen availability, media, platelet processing and manufacturing methods influence the platelet quality and viability during storage. The conception of various platelet additive solutions along with the advent of plastic storage during the 1980s led to enormous developments in platelet storage strategies. Cold storage of platelets gained attention despite its inability to contribute to platelet survival post-transfusion as it offers faster haemostasis. Several developments in platelet storage strategies over the years have improved the quality and shelf-life of stored platelets. Despite the progress, the efficacy of platelets during storage beyond a week has not been achieved. Antioxidants as additives have been explored in platelet storage and have proven to enhance the efficacy of platelets during prolonged storage. However, the molecular interactions of antioxidants in platelets can provide a better understanding of their mechanism of action. Optimization of dosage concentrations of antioxidants is also a critical parameter to be considered as they tend to exhibit toxicity at certain levels. This review provides comprehensive insights into the critical factors affecting platelet storage and the evolution of platelet storage. It also emphasizes the role of antioxidants as additives in platelet storage solutions and their future prospects towards better platelet banking.

Hemostatic function of cold-stored platelets in a thrombocytopenic rabbit bleeding model

BACKGROUND

Transfusion of cold-stored platelet concentrates (CS-PCs) appears effective in massively bleeding patients. However, few studies have evaluated their in vivo hemostatic function in severe thrombocytopenia.

STUDY DESIGN AND METHODS

The in vivo function of plasma-depleted human PCs was evaluated in rabbits with a blocked reticuloendothelial system and busulfan-induced thrombocytopenia. On day 1, a human apheresis PC was processed in a platelet additive solution (PAS-PC) and split evenly for cold or room temperature storage (RTS). On days 3, 6, or 9, RTS- or CS-PAS-PCs were transfused (4.0 × 10⁹ platelets/kg) after plasma depletion into two to four rabbits that developed adequate thrombocytopenia (<25 × 10⁹ /L). Ear bleeding time was measured by two incisions in small veins. The hemostatic rate was defined as the percentage of rabbits achieving bleeding cessation within 600 s at either incision. The experiment was repeated using five different PCs on each storage day.

RESULTS

The mean pre-transfusion rabbit platelet count was 8.6 ± 5.2 × 10⁹ /L. The hemostatic rates with RTS- and CS-PAS-PCs were both 100% on day 3, 93 ± 15% and 73 ± 15% on day 6 (p = .07), and 65 ± 36% and 73 ± 37% on day 9 (p = .27), respectively, with no statistical differences. Total platelet counts were significantly lower after CS-PAS-PC than RTS-PAS-PC transfusion on all days (e.g., 58.7 ± 5.7 vs. 42.4 ± 14.7 × 10⁹ /L, p = .0007, day 9), and did not reach 50 × 10⁹ /L in several experiments. Platelet count increments correlated significantly with hemostatic efficacy for CS-PAS-PC transfusion only.

DISCUSSION

CS-PAS-PCs might achieve similar hemostasis as RTS-PAS-PCs in thrombocytopenic patients with mild bleeding. Hemostatic efficacy could be improved by transfusing more CS-PAS-PCs.

Pathogen inactivation treatment of triple-dose apheresis platelets with amotosalen and ultraviolet a light

BACKGROUND

A triple storage (TS) set allows for pathogen inactivation (PI) treatment of triple-dose apheresis platelet products with amotosalen + UVA. We evaluated the quality and metabolic parameters of platelet concentrates (PCs) pathogen inactivated and stored for 7 days.

MATERIALS AND METHODS

Twelve triple-dose products collected with two different apheresis platforms were treated with amotosalen+UVA. Products were split into three single-dose units. Testing was made pretreatment, after splitting, at days 5 and 7 of storage.

RESULTS

Single-dose PI PCs had a mean platelet content of 2.89 ± 0.35 x 10¹¹ . From baseline to day 7, pH remained stable (7.1 ± 0.1 vs. 7.0 ± 0.1), pO₂ increased (11.3 ± 2.4 vs. 18.3 ± 3.5 kPa) as did LDH (201 ± 119 vs. 324 ± 203 U/L) and lactate (3.6 ± 1.7 vs. 12.1 ± 1.5 mmol/L) (all p < 0.01); pCO₂ decreased (4.1 ± 0.8 vs. 1.5 ± 0.7 mmHg; p < 0.01) and so did bicarbonate (6.6 ± 1.1 vs. 2.5 ± 1.4 mmol/L), glucose (5.6 ± 1.2 vs. 0.4 ± 0.4 mmol/L) and ATP (3.4 ± 0.9 vs. 2.5 ± 1.4 nmol/10⁸ platelets) (all p < 0.05).

CONCLUSION

Triple-dose PCs processed with the TS sets fulfilled the quality requirements and displayed metabolic changes of expected extent during 7-day storage.

Acquired platelet storage container leaks and contamination with environmental bacteria: A preventable cause of bacterial sepsis

Background

Apheresis platelets (AP) may be contaminated by environmental bacteria via container defects acquired during processing, transport, storage, or transfusion, as highlighted by a recent series of septic reactions related to Acinetobacter spp. and other bacterial strains.

Study design and methods

The frequency and nature of acquired container defect reports to one manufacturer were evaluated from January 2019 to July 2020. The published incidence of contamination and sepsis due to environmental bacteria with culture screened AP in the United States was reviewed for the period of 2010–2019.

Results

Review of a manufacturers' records showed 23 US reports of leaks involving 24 containers attributed to postmanufacturing damage, at a rate of 44 per million distributed storage containers. Analysis of returned containers showed evidence of scratches, impressions, and/or piercings. Literature review of US hemovigilance data revealed that environmental bacteria comprised 7% of confirmed positive primary bacterial culture screens, were responsible for 14%–16% of reported septic, and 8 of 28 (29%) fatal reactions with bacterial‐culture screened AP. Sepsis cases have been reported with culture screened, point‐of‐issue (POI) tested, or pathogen‐reduced AP.

Discussion

Environmental contamination of AP is rare but can cause sepsis. Container damage provides a pathway for contamination after culture screening, POI bacteria testing, or pathogen reduction. Blood collectors and transfusion services should have procedures to ensure proper inspection, handling, storage, and transport of AP to avoid damage and should enhance efforts to detect defects prior to release and to eliminate bacteria from all contacting surfaces to minimize the risk of contamination.

Specification and Evaluation of Plasticizer Migration Simulants for Human Blood Products: A Delphi Study

Potentially toxic plasticizers are commonly added to polyvinyl chloride medical devices for transfusion in order to improve their flexibility and workability. As the plasticizers are not chemically bonded to the PVC, they can be released into labile blood products (LBPs) during storage. Ideally, LBPs would be used in laboratory studies of plasticizer migration from the medical device. However, short supply (i.e., limited stocks of human blood in collection centres) has prompted the development of specific simulants for each type of LBP in the evaluation of new transfusion devices. We performed a Delphi study with a multidisciplinary panel of 24 experts. In the first (qualitative) phase, the panel developed consensus definitions of the specification criteria to be met by each migration simulant. Next, we reviewed the literature on techniques for simulating the migration of plasticizers into LBPs. A questionnaire was elaborated and sent out to the experts, and the replies were synthesized in order to obtain a consensus. The qualitative study established specifications for each biological matrix (whole blood, red blood cell concentrate, plasma, and platelet concentrate) and defined the criteria required for a suitable LBP simulant. Ten criteria were suggested: physical and chemical characteristics, opacity, form, stability, composition, ability to mimic a particular clinical situation, ease and safety of use, a simulant–plastic interaction correlated with blood, and compatibility with analytical methods. The questionnaire data revealed a consensus on the use of natural products (such as pig’s blood) to mimic the four LBPs. Opinions diverged with regard to synthetic products. However, an isotonic solution and a rheological property modifier were considered to be of value in the design of synthetic simulants. Consensus reached by the Delphi group could be used as a database for the development of simulants used to assess the migration of plasticizers from PVC bags into LBPs.

Effects of whole blood storage in a polyolefin blood bag on platelets for acute normovolemic hemodilution

Acute normovolemic hemodilution (ANH) is a potential transfusion method for platelets, as well as for red blood cells. However, previous studies have shown that whole blood storage in ANH decreases platelet aggregability by 14.7–76.3% and that this decrease is not recovered by reinfusion. We investigated whether a new whole blood storage method for 6 h using a polyolefin bag, based on the platelet concentrates storage method, would maintain platelet function better than the conventional method using a polyvinyl chloride bag. We demonstrated that storage of whole blood in a polyolefin bag maintained ADP-induced aggregation rates at more than twofold higher than those in a polyvinyl chloride bag, and also significantly suppressed P-selectin expression, a platelet activation marker (ADP-induced aggregation rates: 24.6 ± 5.1% vs. 51.7 ± 11.5%, p = 0.002; P-selectin expression; 50.3 ± 8.4MFI vs. 31.6 ± 9.3MFI, p = 0.018). These results could be attributed to the high gas permeability of polyolefin, which lowered PCO₂ and maintained a high pH with or without agitation. There were no significant changes in platelet count and red blood cell parameters due to the storage methods. Our results suggest that ANH using polyolefin bags is advantageous in improving hemostatic function compared to the conventional method.

Re-introducing whole blood for transfusion: considerations for blood providers

Whole blood is the original blood preparation but disappeared from the blood bank inventories in the 1980s following the advent of component therapy. In the early 2000s, both military and civilian practice called for changes in the transfusion support for massive haemorrhage. The 'clear fluid' policy was abandoned and replaced by early balanced transfusion of platelets, plasma and red cells. Whole blood is an attractive alternative to multi-component therapy, which offers reduced hemodilution, lower donor exposure and simplified logistics. However, the potential for wider re-introduction of whole blood requires re-evaluation of haemolysins, storage conditions and shelf-life, the need for leucocyte depletion/ pathogen reduction and inventory management for blood providers. This review addresses these questions and calls for research to define the optimal whole blood product and the indications for its use.

Modulation of Platelet-Surface Activation: Current State and Future Perspectives

Modulation of platelet-surface activation is important for many biomedical applications such as in vivo performance, platelet storage, and acceptance of an implant. Reducing platelet-surface activation is challenging because they become activated immediately after short contact with nonphysiological surfaces. To date, controversies and open questions in the field of platelet-surface activation still remain. Here, we review state-of-the-art approaches in inhibiting platelet-surface activation, mainly focusing on modification, patterning, and methodologies for characterization of the surfaces. As a future perspective, we discuss how the combination of biochemical and physiochemical strategies together with the topographical modulations would assist in the search for an ideal nonthrombogenic surface.

Cold-Stored Platelets: Review of Studies in Humans

Although numerous reviews and editorials have been published about the biologic features of platelets exposed to cold temperature and their in vitro function, none has focused on the data from studies after transfusion in healthy human participants and patients. This may, in part, be due to the paucity of well-controlled in vivo investigations of cold-stored platelets. Although numerous studies are looking into the recovery and survival of cold-stored platelets (ie, the percentage of infused platelets maintained in circulation over time), very few assess in vivo platelet function. Another caveat is that most studies were performed in the 1960s and 1970s, at a time when platelet collection and storage were different compared to today. Despite these limitations, we believe the transfusion community can take valuable information from these studies. This review is limited to data on cold-stored platelets in plasma or additive solution and does not include data on whole blood or resuspended whole blood from components because the hemostatic properties of whole blood are likely very different (the interested reader is referred to the review article focused on the hemostatic properties of platelets stored in whole blood by van der Meer et al in this special edition of Transfusion Medicine Reviews). In this review, we report that room temperature storage consistently results in a longer in vivo platelet circulation time at the expense of bacterial growth and shorter storage duration, resulting in expiration, wastage, and regional and national shortages. Cold storage of platelets universally results in moderately reduced recovery and markedly reduced survival. We found inconsistent data about the efficacy of cold-stored platelets likely due to study design differences. The analysis of the available data suggests that there is a short-lasting hemostatic effect of cold-stored platelets. Storage time or choice of anticoagulant did not have a clear effect on platelet efficacy after cold storage. In summary, more data and clinical trials are needed to better understand the effect of cold-stored platelets after transfusion into humans.

Sulfonation and Characterization of Tert-Butyl Styrene/Styrene/Isoprene Copolymer and Polypropylene Blends for Blood Compatibility Applications

Hydrogenated styrenic block copolymers (HSBCs) have been used in medical tubing for many years due to their high clarity, flexibility, kink resistance, and toughness. However, when it comes to blood storage applications, HSBC compounds’ market has been limited because of their high hydrophobicity, which may trigger platelet adhesion when contacting with blood. HSBC needs to be physically or chemically modified in advance to make it blood compatible; however, HSBC has strong UV/ozone resistance, thermooxidative stability, and excellent processing capability, which increases the difficulty of the chemical modification process as unsaturated dienes has been converted to saturated stable midblocks. Moreover, medical HSBC-containing compounds primarily make up with the non-polar, hydrophobic nature and benign characteristics of other common ingredients (U.S. Pharmacopeia (USP) grades of mineral oil and polypropylene), which complicates the realization of using HSBC-containing compounds in blood-contacting applications, and this explains why few studies had disclosed chemical modification for biocompatibility improvement on HSBC-containing compounds. Sulfonation has been reported as an effective way to improve the material’s blood/platelet compatibility. In this study, hydrogenated tert-butyl styrene (tBS)-styrene-isoprene block copolymers were synthesized and its blends with polypropylene and USP grades of mineral oil were selectively sulfonated by reaction with acetyl sulfate. By controlling the ratio of the hydrogenated tBS-styrene-isoprene block copolymer in the blend, sulfonated films were optimized to demonstrate sufficient physical integrity in water as well as thermal stability, hydrophilicity, and platelet compatibility.

The effect of platelet storage temperature on haemostatic, immune, and endothelial function: potential for personalised medicine

Reports from both adult and paediatric populations indicate that approximately two-thirds of platelet transfusions are used prophylactically to prevent bleeding, while the remaining one-third are used therapeutically to manage active bleeding. These two indications, prophylactic and therapeutic, serve two very distinct purposes and therefore will have two different functional requirements. In addition, disease aetiology in a given patient may require platelets with different functional characteristics. These characteristics can be derived from the various manufacturing methods used in platelet product production, including collection methods, processing methods, and storage options. The iterative combinations of manufacturing methods can result in a number of unique platelet products with different efficacy and safety profiles, which could potentially be used to benefit patient populations by meeting diverse clinical needs. In particular, cold storage of platelet products causes many biochemical and functional changes, of which the most notable characterised to date include increased haemostatic activity and altered expression of molecules inherent to platelet:leucocyte interactions. The in vivo consequences, both short- and long-term, of these molecular and cellular cold-storage-induced changes have yet to be clearly defined. Elucidation of these mechanisms would potentially reveal unique biologies that could be harnessed to provide more targeted therapies. To this end, in this new era of personalised medicine, perhaps there is an opportunity to provide individual patients with platelet products that are tailored to their clinical condition and the specific indication for transfusion.

Simultaneous determination of di(2-ethylhexyl) phthalate and diisononylcyclohexane-1,2-dicarboxylate and their monoester metabolites in four labile blood products by liquid chromatography tandem mass spectrometry

Di(2-ethylhexyl) phthalate (DEHP) is a common plasticizer that is largely used for PVC blood bags. The migration of DEHP from medical devices into labile blood products (LBP) is a well-known situation. While DEHP has beneficial effects on the storage of red blood cells, it can have toxicological impact due to its potential reprotoxic effects (classified group 1B). Since July 1st, 2015, the French law prohibits the use of tubing made in DEHP-plasticized PVC in paediatric, neonatal and maternity wards. This provision, which could extend in several years more widely to medical devices used for drugs infusion, dialysis, feeding and blood bags, has led manufacturers to replace DEHP to alternative plasticizers such as diisononylcyclohexane-1,2-dicarboxylate (DINCH). In this paper, a liquid chromatography-tandem mass spectrometry (LCMS/MS) method has been developed and validated for the determination of DEHP, DINCH and their corresponding monoester metabolites (MEHP and MINCH) in four labile blood products (LBP): whole blood (WB), red cells concentrate (RCC), plasma and platelet concentrate (PC). Due to strong contamination of blank LBP by DEHP because of its ubiquitous presence in working environment and despite the attention paid to avoid contamination of solvents and glassware, a trap chromatographic column was implemented between the solvent mixing chamber and the injector of the LC system. This set-up permitted to discriminate DEHP present in the sample to DEHP brought by the environmental contamination. In the optimized conditions, all compounds were separated in less than 10 min. The analytes were extracted from LBP samples using a liquid-liquid extraction. After optimization, recoveries were ranged from 47 to 96 %, depending on the analytes and the nature of LBP. Except for DEHP which exhibited RSD values of intermediate precision higher than 20 % at a concentration of 25 nM, all the precision results (repeatability and intermediate precision) were lower than 16 % and trueness values ranged from -16.2-19.8%. Using the validated method, the leachability of DEHP and DINCH from corresponding PVC-blood bags was investigated and the concentrations of their corresponding metabolites, MEHP and MINCH, were determined in whole blood, red cells concentrate, plasma and platelet concentrate.

Reduction of exposure to plasticizers in stored red blood cell units

Introduction:

Plastic can be toxic and hazardous to an organism’s health, but it is being widely used in our daily lives. Di-2-ethylhexyl-phthalate is the most common plasticizer in medical devices made of polyvinylchloride and is commonly found in soft bags storing red blood cell units. Di-2-ethylhexyl-phthalate and its degradation product mono-2-ethylhexyl-phthalate can migrate into human body fluids, for example, blood and tissues. The aim of the study was to assess the concentration of plasticizers in red blood cell units according to storage time and after mechanical rinsing using a cell salvage device.

Methods:

Levels of di-2-ethylhexyl-phthalate and mono-2-ethylhexyl-phthalate were analysed in 50 unwashed red blood cell units using liquid chromatography coupled with tandem mass spectrometry. In addition, phthalate concentrations were measured before and after mechanical rinsing in six more washed red blood cell units with storage times ranging between 36 and 56 days. A linear regression model was determined by the daily increase of di-2-ethylhexyl-phthalate and mono-2-ethylhexyl-phthalate in the stored red blood cell units subject to their storage time (range = 4-38 days), and the effect of mechanical rinsing on their phthalate concentration was calculated.

Results:

A linear correlation was found between storage time of unwashed red blood cell units and the concentration of di-2-ethylhexyl-phthalate (p < 0.001) or mono-2-ethylhexyl-phthalate (p < 0.001). Stored red blood cell units older than 14 days had significantly higher concentrations of both contaminants than red blood cell units of shorter storage time (p < 0.001). Mechanical rinsing in washed red blood cell units attained a reduction in the di-2-ethylhexyl-phthalate and mono-2-ethylhexyl-phthalate concentration by a median of 53% (range = 18-68%; p = 0.031) and 87% (range = 68-96%; p = 0.031), respectively.

Conclusion:

Leaching of di-2-ethylhexyl-phthalate and mono-2-ethylhexyl-phthalate into red blood cell units depends on the duration of storage time. Plasticizers can be significantly reduced by mechanical rinsing using cell salvage devices, and thus, red blood cell units can be regenerated with respect to chemical contamination.

Red cell storage lesion and the effect of buffy-coat reduction on the biochemical parameters

BACKGROUND

Biochemical and metabolic changes in stored RBC may influence the clinical outcome. We aimed to study the temporal changes in the biochemical parameters and the effect of buffy-coat reduction on RBC storage lesions.

MATERIALS AND METHODS

A prospective observational study was conducted on fifteen RBC units five each of buffy coat reduced CPD/SAGM (quadruple bags), non-buffycoat reduced CPD/SAGM (triple bags) and non-buffycoat reduced CPDA (double bags). Biochemical parameters such as K⁺, LDH, pH plasma hemoglobin and percentage hemolysis were measured sequentially on day 7,14, 21, 28, 35 and 42. The data was analyzed using SPSS version 20.

RESULTS

Extracellular K⁺ and LDH increased rapidly starting from the first week of storage. And the all the parameters including percentage hemolysis were significantly higher in RBC stored in CPDA (double bags) compared to that stored in SAGM (triple and quadruple). The difference observed in buffy-coat reduced units in comparison to the non-leukocyte reduced units were statistically not significant.

CONCLUSION

The quality of red cells stored in SAGM was superior to that suspended in CPDA measured in terms of percent hemolysis, plasma hemoglobin, potassium and LDH. There was no effect of buffy-coat leukocyte reduction on the red cell storage lesion.

Interactions Between Biological Products and Product Packaging and Potential Approaches to Overcome Them

Biological products such as protein-based biopharmaceuticals are playing an important role in the healthcare and pharmaceutical industry. The interaction between biological products and packaging materials has become the focus of many studies since it can reduce the effectiveness of biological products. These interactions are heavily influenced by the surface properties and physicochemical nature of the therapeutic agents and the packaging materials. Therefore, it is critical to understand the interactions between packaging materials and biological products in order to design biocompatible packaging materials and develop approaches to minimize adverse interactions. We describe the interactions that occur when using several common packaging materials, including glass and polymer. We discuss the interaction between these materials and biological products such as blood, blood derivatives, recombinant proteins, monoclonal antibodies, and gene therapeutics. We also summarize approaches for overcoming these interactions. Understanding the interactions between biological materials and packaging materials is critical for the development of novel packaging materials that improve the safety of pharmaceutical products.

Cold storage of platelets in platelet additive solution: an in vitro comparison of two Food and Drug Administration-approved collection and storage systems

BACKGROUND

Refrigeration of platelets (PLTs) in a PLT additive solution (PAS) reduces PLT activation compared to storage in plasma and preserves function for at least 15 days. Currently only two PASs are licensed by the Food and Drug Administration, each for use with only one apheresis platform. In this study, we compared the metabolic, functional, and activation status of PLTs collected on a Trima apheresis collection system and stored refrigerated in Isoplate (ISO) PAS to PLTs collected on an Amicus collection system and stored refrigerated in Intersol (INT) PAS.

STUDY DESIGN AND METHODS

Apheresis PLTs (n = 4-7 donors) were collected on a Trima in ISO PAS or on an Amicus in INT PAS. PLTs were stored in a walk-in refrigerator (1-6°C) without agitation for long-term storage. Bags were assayed at Days 1, 5, 10, and 15 of storage. Measurements included PLT counts, pH, aggregation response, rotational thromboelastometry, and activation markers.

RESULTS

Cold-stored Trima-collected PLTs in ISO were slightly more hemostatic than Amicus-collected PLTs in INT and displayed better adhesion to collagen under flow conditions. Amicus-collected PLTs in INT showed increased microaggregate formation on Days 5 and 10 and a significant decrease in PLT count over storage. Trima-collected PLTs in ISO displayed better clot strength than Amicus-collected PLTs in INT.

CONCLUSION

Compared to cold-stored Amicus PLTs in INT, Trima PLTs in ISO display superior in vitro function and may be better suited for treatment of bleeding patients. Clinical studies are warranted to confirm these findings.

In vitro evaluation of di(2-ethylhexyl)terephthalate-plasticized polyvinyl chloride blood bags for red blood cell storage in AS-1 and PAGGSM additive solutions

BACKGROUND

Di(2-ethylhexyl)phthalate (DEHP) makes polyvinyl chloride flexible for use in blood bags and stabilizes the red blood cell (RBC) membrane preventing excessive hemolysis. DEHP migrates into the blood product and rodent studies have suggested that DEHP exposure may be associated with adverse health effects albeit at high dosages. Although structurally and functionally similar to DEHP, di(2-ethylhexyl)terephthalate (DEHT; or Eastman 168 SG [Eastman Chemical Company]) is metabolically distinct with a comprehensive and benign toxicology profile. This study evaluated RBC stability in DEHT-plasticized bags with AS-1 and PAGGSM compared to conventional DEHP-plasticized bags with AS-1.

STUDY DESIGN AND METHODS

Thirty-six whole blood units were collected into CPD solution, leukoreduced, centrifuged, and divided into RBCs and plasma. To limit donor-related variability, three ABO-identical RBCs were mixed together and then divided equally and stored among the three different plasticizer and additive solution combinations. RBCs from 12 trios were analyzed for a standard panel of in vitro variables on Day 0 and after storage.

RESULTS

No individual bag on Day 42 exceeded the US 1.0% hemolysis criteria. While hemolysis during storage was higher in the DEHT bags, the PAGGSM RBCs were close to the control RBCs (0.38% vs. 0.32%, respectively). ATP retention was higher than 70% and potassium levels were similar regardless of plasticizer. Additional RBC variables exhibited some significant differences but were not viewed as clinically important.

CONCLUSION

DEHT/PAGGSM provides similar hemolysis protection to that of DEHP/AS-1. Although hemolysis values with DEHT and AS-1 are higher than that of DEHP, DEHT is a potential DEHP alternative.

In vitro properties of concentrated canine platelets stored in two additive solutions: a comparative study

BACKGROUND

Platelet transfusion therapy poses many challenges in veterinary clinical practice. Lack of readily available blood donors, short shelf-life, and inability to administer a sufficient number of platelets to meet a dog's transfusion need are the major difficulties encountered. Platelet additive solutions are already in use at American and European human blood banks, showing to be a realistic alternative. This study compares the in vitro platelet function in plasma, Composol, or SSP+ during storage for 13 days. Platelet rich plasma-platelet concentrate with 35% plasma and 65% platelet additive solutions (Composol or SSP+) and a control group (100% plasma) were prepared. Swirling, platelet count, blood gases, metabolic variables, platelet activation markers, and apoptosis markers were analyzed on days 1, 5, 9 and 13.

RESULTS

Swirling was well preserved and pH was acceptable (> 6.2) during storage for all platelet additive solutions units until day 9. SSP + units showed more stable pH and metabolic variables until day 13. Platelets in plasma showed higher glucose consumption than in Composol or in SSP+. The platelet additive solutions units showed better platelet metabolism maintenance, reduced glucose consumption and lactate production. The apoptotic markers were still low for 9 days in platelet concentrates with platelet additive solutions, suggesting the possibility to extend the shelf life with the use of SSP+ or Composol.

CONCLUSIONS

Our findings suggest that the uses of Composol and SSP+ in canine platelet concentrates are potential alternatives in veterinary blood banks.

Pilot study on novel blood containers with alternative plasticizers for red cell concentrate storage

Di (2-ethylhexyl) phthalate (DEHP), a typical plasticizer used for polyvinyl chloride (PVC) blood containers, is eluted from the blood containers and exerts protective effects on red blood cells. However, a concern for detrimental effects of DEHP on human health has led to the development of potential DEHP substitutes. Here, we compared the red blood cell preservation ability of two types of non-DEHP blood containers with safe alternative plasticizers to that of DEHP blood containers. Red cell concentrates in mannitol-adenine-phosphate solution (MAP/RCC) were stored for 6 weeks in PVC blood bags containing DEHP, di-isononyl-cyclohexane-1,2-dicarboxylate (DINCH) and di (2-ethylhexyl) 4-cyclohexene-1,2-dicarboxylate (DOTH), or 4-cyclohexene-1,2-dicarboxylic acid dinonyl ester (DL9TH) and DOTH. There was no significant difference in the total amount of plasticizer eluted into MAP/RCC (till 3 weeks from the beginning of the experiment), hemolysis of MAP/RCC, and osmotic fragility of MAP/RCC between the non-DEHP blood containers and DEHP blood containers. Hematological and blood chemical indices of MAP/RCC in all containers were nearly the same. Thus, DOTH/DINCH and DOTH/DL9TH blood containers demonstrate the same quality of MAP/RCC storing as the DEHP blood containers. Since DOTH, DINCH, and DL9TH were reported to be safe, DOTH/DINCH and DOTH/DL9TH blood containers are promising candidate substitutes for DEHP blood containers.

Low-thrombogenic fibrin-heparin coating promotes in vitro endothelialization

Long-term performance of implanted cardiovascular grafts can be ensured if living endothelium overgrows their surface. Surface modifications to implants are therefore being sought that can encourage endothelialization while preventing thrombus formation until the natural endothelium is formed. In the present study, heparin was covalently attached to a fibrin mesh grown from a polyvinyl chloride (PVC) substrate surface by the catalytic action of surface immobilized thrombin on a fibrinogen solution. The coating prevented platelet activation, thrombin generation and clot formation, and reduced inflammatory reactions when exposed to fresh human whole blood circulating in a Chandler loop model. In addition, in vitro seeded human umbilical vein and human saphenous vein endothelial cells showed considerably enhanced attachment and proliferation on the coating. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 2995-3005, 2017.

Alternative plasticizer, 4-cyclohexene-1,2-dicarboxylic acid dinonyl ester, for blood containers with protective effects on red blood cells and improved cold resistance

Di (2-ethylhexyl) phthalate (DEHP), a typical plasticizer used for polyvinyl chloride (PVC), is eluted from PVC-made blood containers and protects against red blood cell (RBC) hemolysis. However, concerns have arisen regarding the reproductive and developmental risks of DEHP in humans, and the use of alternative plasticizers for medical devices has been recommended worldwide. In this study, we propose that the use of a novel plasticizer, 4-cyclohexene-1,2-dicarboxylic acid dinonyl ester (DL9TH), could help produce more useful and safe blood containers. PVC sheet containing DL9TH and di (2-ethylhexyl) 4-cyclohexene-1,2-dicarboxylate (DOTH) provides comparable or superior protective effects to RBCs relative to PVC sheet containing DEHP or di-isononyl-cyclohexane-1,2-dicarboxylate (DINCH^® , an alternative plasticizer that has been used in PVC sheets for blood containers). The total amount of plasticizer eluted from DOTH/DL9TH-PVC sheets is nearly the same as that eluted from DEHP-PVC sheets. In addition, DOTH/DL9TH-PVC has better cold resistance than DEHP- and DINCH^® -PVC sheets. In vitro and in vivo tests for biological safety based on International Organization for Standardization guidelines (10993 series) suggest that the DOTH/DL9TH-PVC sheet can be used safely. Subchronic toxicity testing of DL9TH in male rats in accordance with the principles of Organisation for Economic Co-operation and Development Test Guideline 408 showed that DL9TH did not induce adverse effects up to the highest dose level tested (717 mg/kg body weight/day). There were no effects on testicular histopathology and sperm counts, and no indications of endocrine effects: testosterone, thyroid-stimulating hormone, follicle-stimulating hormone, and 17β-estradiol were unchanged by the treatment, compared with the control group. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 1052-1063, 2018.

Modelling gas exchange during platelet storage without agitation

The aim of this study was to create a model of oxygen distribution within platelet storage bags to evaluate implications of reduced agitation approaches. Based on our model, platelet concentration and surface area most affect internal partial pressure of oxygen, while temperature modifications have least effect, indicating primary potential approaches for optimization of platelet storage with reduced or absent agitation.

[Innovative technology and blood safety]

If technological innovations are not enough alone to improve blood safety, their contributions for several decades in blood transfusion are major. The improvement of blood donation (new apheresis devices, RFID) or blood components (additive solutions, pathogen reduction technology, automated processing of platelets concentrates) or manufacturing process of these products (by automated processing of whole blood), all these steps where technological innovations were implemented, lead us to better traceability, more efficient processes, quality improvement of blood products and therefore increased blood safety for blood donors and patients. If we are on the threshold of a great change with the progress of pathogen reduction technology (for whole blood and red blood cells), we hope to see production of ex vivo red blood cells or platelets who are real and who open new conceptual paths on blood safety.

Platelets: handle with care

Platelets are delicate cells that require careful handling between collection, preparation and transfusion. This review addresses practical questions relating to platelet concentration, resting time after collection, total time and number of periods without agitation and temperature. The bags in which platelets are stored are made from gas-permeable plastic to allow sufficient oxygen for the platelets to maintain aerobic respiration. Manufacturers have assigned limits for platelet content and concentration, and these must not be exceeded. There is no strong evidence for or against the resting of platelets post-collection and pre-agitation, but platelets should not be over-wrapped during this period as this compromises gas exchange; a short rest period of up to 1 h may allow the separation of minor aggregates. It is necessary to transport platelet concentrates (e.g. from manufacturing site to hospital), but these periods without gas exchange must be limited to avoid excessive damage to the platelets. Current data support a total of 24 h of transportation per component but with no individual period lasting more than 8 h. Platelets need to be stored at 20-24 °C based on evidence that colder storage leads to irreversible changes on the platelet membrane, resulting in phagocytosis of the platelets following transfusion. Storage at warmer temperatures may lead to an increase in bacterial risk. On the basis of this review, the UK Guidelines for Blood Transfusion Services have been updated to ensure that platelets are handled in the most appropriate way to ensure that efficacious components are provided for patients.

An investigation of red blood cell concentrate quality during storage in paediatric-sized polyvinylchloride bags plasticized with alternatives to di-2-ethylhexyl phthalate (DEHP)

BACKGROUND AND OBJECTIVES

Di-2-ethylhexyl phthalate (DEHP) is a blood bag plasticizer. It is also a toxin, raising concerns for vulnerable populations, for example, neonates and infants. Here, the in vitro quality of red cell concentrates (RCC) stored in paediatric bags formulated with alternative plasticizers to DEHP was compared.

MATERIALS AND METHODS

RCC were pooled and split into polyvinylchloride (PVC)/DEHP, PVC/1,2-cyclohexanedicarboxylic acid diisononyl ester (DINCH) or PVC/butyryl trihexyl citrate (BTHC) bags. Quality was assessed on storage days 5, 21, 35 and 43.

RESULTS

Metabolism differed among the bags: pCO2 levels were lowest and pO2 were highest in BTHC bags. Glucose consumption and lactate production suggested higher metabolic rates in BTHC bags. ATP levels were best maintained in DINCH bags (day 43 mean level: 2·86 ± 0·29 μmol/g Hb). RCC in BTHC bags had the greatest potassium release (54·6 ± 3·0 mm on day 43). From day 21, haemolysis was higher in BTHC bags (P < 0·01) and by day 43 had exceeded 0·8% (0·85 ± 0·10%). RCC in BTHC bags showed more microparticle formation than RCC in DEHP or DINCH bags.

CONCLUSION

The results suggest that the BTHC formulation used was detrimental to RBC quality. DINCH bags could be a viable alternative to DEHP: they outperformed DEHP bags energetically, with better maintenance of ATP levels.

Blood Bag Plasticizers Influence Red Blood Cell Vesiculation Rate without Altering the Lipid Composition of the Vesicles

BACKGROUND

Polyvinyl chloride (PVC) plasticized with di(2-ethylhexyl) phthalate (DEHP) is commonly used for blood collection and storage. DEHP has protective effects on RBC membranes, but is also a toxin.

METHODS

A paired study was conducted to investigate the influence of DEHP and two alternative plasticizers, 1,2-cyclohexane-dicarboxylic acid diisononyl ester (DINCH) and n-butyryl-tri-n-hexyl citrate (BTHC), on the preservation of RBCs stored for 42 days in PVC pediatric bags. The RBC membrane was evaluated for supernatant hemoglobin (Hb), release of extracellular microvesicles (EVs), osmotic fragility, deformability, and lipid composition.

RESULTS

In BTHC-plasticized bags, the supernatant Hb increase during storage was 2 times greater than in DINCH- and DEHP-plasticized bags. By day 21, EV concentrations had doubled from day-5 levels in DINCH- and DEHP-, and trebled in BTHC-plasticized bags. RBC mean cell volumes were greater in BTHC- than in DINCH- or DEHP-plasticized bags (p < 0.001). Osmotic fragility differed significantly among plasticizers (p < 0.01). After day 21, RBC deformability decreased in all, but to a greater extent in the bags with BTHC. Phospholipid composition of RBCs and EVs was not different among plasticizers.

CONCLUSION

Membrane stabilization capacity differed among the plasticizers. RBC in BTHC bags stored more poorly, while DEHP and DINCH bags offered better protection against vesiculation, osmotic stress, and Hb loss.

Risks associated with red blood cell transfusions: potential benefits from application of pathogen inactivation

BACKGROUND

Red blood cell (RBC) transfusion risks could be reduced if a robust technology for pathogen inactivation of RBC (PI-RBCs) were to be approved.

MATERIALS AND METHODS

Estimates of per-unit and per-patient aggregate infectious risks for conventional RBCs were calculated; the latter used patient diagnosis as a determinant of estimated lifetime exposure to RBC units. Existing in vitro data for the two technologies under development for producing PI-RBCs and the status of current clinical trials are reviewed.

RESULTS

Minimum and maximum per-unit risk were calculated as 0.0003% (1 in 323,000) and 0.12% (1 in 831), respectively. The minimum estimate is for known lower-risk pathogens while the maximal estimate also includes an emerging infectious agent (EIA) and endemic area Babesia risk. Minimum and maximum per-patient lifetime risks by diagnosis grouping were estimated as 1.5 and 3.3%, respectively, for stem cell transplantation (which includes additional risk for cytomegalovirus transmission); 1.2 and 3.7%, respectively, for myelodysplastic syndrome; and 0.2 and 44%, respectively, for hemoglobinopathy.

DISCUSSION

There is potential for PI technologies to reduce infectious RBC risk and to provide additional benefits (e.g., prevention of transfusion-associated graft-versus-host disease and possible reduction of alloimmunization) due to white blood cell inactivation. PI-RBCs should be viewed in the context of having a fully PI-treated blood supply, enabling a blood safety paradigm shift from reactive to proactive. Providing insurance against new EIAs. Further, when approved, the use of PI for all components may catalyze operational changes in blood donor screening, laboratory testing, and component manufacturing.

Established and theoretical factors to consider in assessing the red cell storage lesion

The collection and storage of red blood cells (RBCs) is a logistical necessity to provide sufficient blood products. However, RBC storage is an unnatural state, resulting in complicated biological changes, referred to collectively as the "storage lesion." Specifics of the storage lesion have been studied for decades, including alterations to cellular properties, morphology, molecular biology of carbohydrates, proteins and lipids, and basic metabolism. Recently, mass spectrometry-based "omics" technology has been applied to the RBC storage lesion, resulting in many new observations, the initial effects of which are more information than understanding. Meanwhile, clinical research on RBC transfusion is considering both the efficacy and also the potential untoward effects of transfusing stored RBCs of different ages and storage conditions. The myriad biological changes that have now been observed during the storage lesion have been extensively reviewed elsewhere. This article focuses rather on an analysis of our current understanding of the biological effects of different elements of the storage lesion, in the context of evolving new clinical understanding. A synopsis is presented of both established and theoretical considerations of the RBC storage lesion and ongoing efforts to create a safer and more efficacious product.