Classification review of dental adhesive systems: from the IV generation to the universal type

Experimental and Chitosan-Infused Adhesive with Dentin Pretreated with Femtosecond Laser, Methylene Blue-Activated Low-Level Laser, and Phosphoric Acid

Aim: To prepare experimental adhesive (EA) with 1% and without chitosan nanoparticles on dentin conditioned with a conventional technique phosphoric acid (PA) compared with two different contemporary techniques: photodynamic therapy (PDT) and femtosecond laser (FSL). Method: The methodology consisted of synthesis of EA and 1% chitosan-modified adhesive (CMA). Scanning electron microscopy, dentin adhesive interface assessment, energy-dispersive spectroscopy, shear bond strength (SBS), degree of conversion (DC), and bond failure were assessed. Teeth were selected, disinfected, and mounted in acrylic up to the cementoenamel junction. Occlusal enamel was removed and teeth were randomly allocated into groups and conditioned. These included Group 1: samples treated with PA; Group 2: specimens conditioned with methylene blue photosensitizer (MBP) activated by PDT; and Group 3: samples conditioned with FSL. Following different conditioning regimes, specimens were bonded using 1% CMA and EA. The composite buildup was followed by SBS testing and a bond failure assessment. DC was assessed for both EA and CMA. Analysis of variance and Tukey's post hoc test were used to compare the mean and standard deviation of SBS and DC in different experimental groups, with a significance level of p < 0.05. Results: Dentin pretreated with etch and rinse demonstrated the highest bond strength with 1% CMA. Dentin conditioned with MBP activated by PDT and bonded to EA showed the lowest bond scores. Overall SBS values of 1% CMA were better than EA irrespective of the conditioning regime of dentin. The DC was higher in EA adhesive. This was followed by DC in 1% CMA. DC in EA was found to be comparable with 1% CMA. Conclusions: PA remains the gold standard for dentin conditioning. The incorporation of 1% chitosan in adhesive improves SBS and results in no change in DC. The use of FSL in dentin conditioning can be used as an alternative approach as it results in SBS within acceptable limits. The study was approved by the ethical board of King Saud University.

Application of Minimally Invasive Prosthodontics With an Esthetic 16-Unit Rehabilitation of the Dental Arches for a Patient With Anterior Dental Crowding and a Relatively Deep Bite: A Case Report

Minimally invasive dentistry indicates an operative intervention to correct or manipulate a dental anomaly or lesion while focusing on preserving the original tissues as much as possible. Losing teeth or teeth loss is one of the most common problems patients have always suffered from due to different reasons, such as caries, trauma, or periodontal problems. In cases of multiple teeth loss, oral rehabilitation is usually indicated. Aesthetic reconstruction of a patient's mouth with crowded teeth and a deep bite is challenging for prosthodontists. This case report shows an applicable conservative approach of minimally invasive dentistry in this situation while maintaining vertical dimension and centric occlusion.

Stability of the Dentin-Bonded Interface Using Self-Etching Adhesive Containing Diacrylamide after Bacterial Challenge

Purpose/Aim: Acrylamides are hydrolytically stable at pH lower than 2, and were shown to preserve bonded interface integrity with two-step, total etch adhesives. The objective of this study was to leverage those two characteristics in self-etching primers containing the acidic monomer 10-MDP and test the microtensile bond strength before and after incubation with S. mutans incubation. Materials and Methods: Acidic primers (10 wt % 10-methacryloyloxydecyl dihydrogen phosphate─10-MDP; 45 wt % N,N-diethyl-1,3-bis(acrylamido)propane─DEBAAP, or 2-hydroxyethyl methacrylate─HEMA; 45 wt %, glycerol-dimethacrylate─GDMA) and adhesives (DEBAAP or HEMA/10-MDP/UDMA 45/10/45 wt %) were made polymerizable by the addition of 0.2 wt % camphorquinone, 0.8 wt % ethyl-4-dimethylaminobenzoate, 0.4 wt % diphenyliodonium hexafluorophosphate, and 0.1 wt % butylhydroxytoluene. Nonsolvated materials were characterized for flexural strength (FS), modulus (E), toughness, water sorption/solubility (WS/SL), contact angle, and vinyl conversion (DC). Viscosity was evaluated after adding 20 and 40 vol % ethanol to the primer and adhesive, respectively. The experimental materials or Clearfil SE Bond (CC─commercial control) were used to bond a commercial composite (Filtek Supreme) to the flat surface of human dentin. Microtensile bond strength (MTBS) was tested in 1 mm2 sticks for the 5 primer/bond combinations: CC (Clearfil Bond Primer and Bond), HH (HEMA/HEMA), DD (DEBAAP/DEBAAP), HD (HEMA/DEBAAP), and DH (DEBAAP/HEMA). Prior to testing, sticks were stored in water or biofilm-inducing culture medium with S. mutans for 1 week. Confocal images and FTIR-ATR evaluation evaluated the hybrid layer of the adhesives. Results were analyzed using Student's t-test (WS, SL, DC, contact angle, FS, E, toughness), one-way ANOVA/Tukey's test for viscosity, and two-way ANOVA/Tukey's test for MTBS (95%). Results: HEMA-based materials had lower contact angle (p = 0.004), higher WS (p < 0.001), and similar SL values compared to DEBAAP (p = 0.126). FS (p = 0.171) and E (p = 0.065) dry values were similar, but after one week of water storage, FS/E dropped more significantly for HEMA materials. Dry and wet toughness was greater for DEBAAP (p < 0.001), but it also had the greatest drop (46%). Clearfil bonds had the highest viscosity, followed by DEBAAP and HEMA, respectively (p = 0.002). For the primers, HEMA had the lowest viscosity (p = 0.003). As far as MTBS, all groups tested in water were statistically different when compared with HH (p < 0.001). After storage in biofilm, DH had the highest MTBS value, being statistically different from HH (p = 0.002), CC (p = 0.015), and DD (p = 0.027). Conclusions: The addition of a diacrylamide and its association with HEMA in self-etching adhesive systems provided greater bonding stability after bacterial challenge.

Estimation of the effect of acetone- or ethanol-based solvents on shear bond strength of composite resin using air- and blot-dry techniques

Background

An adequate amount of water is necessary to maintain the shape of collagen fibrils while excess water hampers dentin-resin bonding. Air-drying lacks control while blot-drying displaces water in a controlled manner. Solvents in adhesives affect the configuration of collagen fibrils. Thus, the present study aimed to compare the influence of air- or blot-drying methods on shear bond strength (SBS) of acetone- and ethanol-based adhesives.

Materials and Methods

Thirty-six extracted noncarious third molars with similar crown heights were selected. Teeth were decoronated and randomly divided into two groups: after acid etching, Group I was treated with acetone-based adhesives and Group II with ethanol-based adhesives. They were again subdivided into subgroups A (blot-dried) and B (air-dried) containing nine samples each. Dentin surfaces were etched and rinsed. After the respective drying method, adhesive application and composite buildup were done. SBS was measured. The data were subjected to statistical analysis.

Results

Acetone-based adhesive showed the highest SBS in both drying methods. Further, blot-dried dentin produced significantly higher SBS than air-dried dentin.

Conclusion

Solvent type and drying methods have an effect on the bond strength of total-etch adhesives to dentin. Acetone-based adhesives used with blot-drying techniques showed the best results.

Effect of two different bonding agents on the microleakage used for fluoride releasing pit and fissure sealant

The evaluation of 5th and 7th generation bonding agents on the extent of micro leakage from sealant such as fluoride in forty extracted human premolar teeth is of interest to dentists. 40 extracted teeth satisfying the inclusion and exclusion criteria were randomly divided into two groups. Group I utilized a bonding agent from the fifth generation, whereas Group II employed a bonding agent from the seventh generation, both treated with Helioseal F Plus sealant. Following a 24-hour period of cultivation at a temperature of 37°C and subjecting the sample to 100 cycles of temperature fluctuation varying in temperature from 5°C to 55°C, the samples were submerged in a 0.2% methylene blue dye mixture for duration of 24 hours and examined under a microscope. Result showed that fifth-generation agent mean microleakage was greater, but not statistically significant. The seventh-generation agent demonstrated minimal microleakage with simpler application.

The influence of neutral MDP-Na salt on dentin bond performance and remineralization potential of etch-&-rinse adhesive

OBJECTIVES

To investigate the effect of neutral 10-methacryloyloxydecyl dihydrogen phosphate salt (MDP-Na) on the dentin bond strength and remineralization potential of etch-&-rinse adhesive.

METHODS

Two experimental etch-&-rinse adhesives were formulated by incorporating 0 wt% (E0) or 20 wt% (E20) neutral MDP-Na into a basic primer. A commercial adhesive, Adper Single Bond 2 (SB, 3 M ESPE), served as the control. Sixty prepared teeth were randomly allocated into three groups (n = 20) and bonded using either one of the experimental adhesives or SB. Following 24 h of water storage, the bonded specimens were sectioned into resin-dentin sticks, with four resin-dentin sticks obtained from each tooth for microtensile bond strength (MTBS) test. Half of the sticks from each group were immediately subjected to tensile loading using a microtensile tester at a crosshead speed of 1 mm/min, while the other half underwent tensile loading after 6-month incubation in artificial saliva (AS). The degree of conversion (DC) of both the control and experimental adhesives (n = 6 in each group) and the adsorption properties of MDP-Na on the dentin organic matrix (n = 5 in each group) were determined using Fourier-transform infrared spectrometry. Furthermore, the effectiveness of neutral MDP-Na in promoting the mineralization of two-dimensional collagen fibrils and the adhesive-dentin interface was explored using transmission electron microscopy and selected-area electron diffraction. Two- and one-way ANOVA was employed to assess the impact of adhesive type and water storage on dentin bond strength and the DC (α = 0.05).

RESULTS

The addition of MDP-Na into the primer increased both the short- and long-term MTBS of the experimental adhesives (p = 0.00). No difference was noted in the DC between the control, E0 and E20 groups (p = 0.366). The MDP-Na remained absorbed on the demineralized dentin even after thorough rinsing. The intra- and extra-fibrillar mineralization of the two-dimensional collagen fibril and dentin bond hybrid layer was confirmed by transmission electron microscopy and selected-area electron diffraction when the primer was added with MDP-Na.

CONCLUSIONS

The use of neutral MDP-Na results in high-quality hybrid layer that increase the dentin bond strength of etch-&-rinse adhesive and provides the adhesive with remineralizing capability. This approach may represent a suitable bonding strategy for improving the dentin bond strength and durability of etch-&-rinse adhesive.

Bond strength and surface roughness assessment of novel antimicrobial polymeric coated dental cement

Resin cement integrated with zein-incorporated magnesium oxide nanoparticles has previously been found to inhibit oral microbes and decrease bacterial biofilm. However, the bond strength and surface features of this biomaterial have yet to be investigated. The objective of this study was to evaluate the shear bond strength, mode of fracture, and surface roughness of resin cement modified with zein-incorporated magnesium oxide nanoparticles. Characterization of the cement was performed by X-ray diffraction, field emission scanning electron microscopy, and Fourier transform infrared spectroscopy. 126 human teeth were divided into 3 groups and cemented to lithium disilicate ceramic using resin cement with zein-incorporated magnesium oxide nanoparticles at concentrations of 0%, 1%, and 2% (n = 42). 21 samples of each group were subjected to the shear bond strength test, while the other 21 underwent thermocycling for 10,000 cycles before the test, after which all samples were evaluated for the mode of fracture. To assess surface roughness, resin cement disks were analyzed by a profilometer before and after undergoing thermocycling for 10,000 cycles. The shear bond strength of the cement with 1% and 2% nanoparticles was significantly higher than the control before thermocycling. The mode of fracture was found to be mainly adhesive with all groups, with the unmodified cement presenting the highest cohesive failure. There was no significant difference in surface roughness between the groups before or after thermocycling. The addition of zein-incorporated magnesium oxide nanoparticles to resin cement improved or maintained the shear bond strength and surface roughness of the resin cement.

Flexural strength of dental adhesives with different photoinitiator systems

Background

The aim of this study was to investigate the flexural strength of dental adhesives containing different combinations of photoinitiators systems.

Material and Methods

The organic matrix of the experimental adhesives was created using a blend of monomers: 50% by weight bisphenol-A glycidyl methacrylate (BisGMA) and 50% triethylene glycol dimethacrylate (TEGDMA). The photoinitiators utilized were camphorquinone (CQ) and phenylbis(2,4,6-trimethylbenzoyl)phosphine oxide (BAPO), with diphenyliodonium hexafluorophosphate (DPIHFP) and 2-(Dimethylamino)ethyl methacrylate (DMAEMA) as co-initiators. These photoinitiators and co-initiators were integrated into the organic matrix at a concentration of 0.5% by mass, resulting in the formation of 6 groups (n=12): CQ/DMAEMA (control); CQ/DMAEMA/DPIHFP; BAPO; BAPO/DMAEMA; BAPO/DPIHFP and BAPO/DMAEMA/DPIHFP. Samples measuring 7 mm in length, 2 mm in width, and 1 mm in height were prepared and subjected to a three-point flexural test. Data were analyzed using one-way ANOVA with Tukey's post-hoc test (α=0.05).

Results

Results indicated that groups incorporating BAPO and DPIHFP exhibited higher flexural strength compared to those with CQ and DMAEMA. The BAPO/DPIHFP group achieved the highest mean flexural strength values (p<0.001).

Conclusions

These findings suggest that using adhesive systems with alternative photoinitiators and co-initiators can lead to superior flexural strength compared to conventional systems. Key words:Photoinitiators, Dentin-bonding agents, Light-curing.

Effects of Thermocycling with Two Different Curing Techniques on Enamel Micro-Cracks Formation, Debonding, and Failure Modes of Ceramic Brackets: An In Vitro Study

Despite the rise in popularity of ceramic braces for adults, the risk of enamel microcracks (EMCs) upon removal remains a significant drawback for both dental professionals and patients. Our study aimed to assess the effects of thermocycling, pre-curing, and co-curing techniques with different bonding agents on the enamel surface of teeth after the removal of ceramic brackets. We also examined the incidence, quantity, length, and direction of EMCs on tooth surfaces. Additionally, the adhesive remnant index (ARI) scores and orthodontic bracket bond failure modes were evaluated and compared. The study divided 40 extracted upper canine teeth into ten groups for further analysis. Two groups had intact enamel as the negative control, while the remaining groups had orthodontic ceramic brackets bonded using different bonding agents and curing techniques. Thermocycling was performed in five groups, and ARI was assessed after debonding. The study findings were statistically significant (p < 0.05) in demonstrating the impact of curing techniques on EMCs and debonding outcomes. Seventh-generation bonding agents resulted in complete adhesive removal (ARI = 0). The microcracks' incidence, number, and length showed insignificant results. Differences in ARI between thermocycler and non-thermocycler samples were insignificant. Both co-curing and pre-curing techniques yielded comparable ARI results. This study highlights the importance of using advanced bonding agents to minimize enamel damage during ceramic bracket debonding.

Clinical Difficulties Related to Direct Composite Restorations: A Multinational Survey

AIMS

Composite materials are widely used in dentistry for direct tooth restorations. However, they are highly sensitive to the working technique employed during the restorative procedure. Even minor procedural errors can have a significant impact on the quality including the longevity of the restoration. Hence the aim of this study was to determine the material preferences and analyse the clinical problems associated with direct composite restorations in a cohort of dentists.

METHODS

A 20-item online questionnaire was created in English and administered 1830 general dentists and specialists in 13 countries. The first section of the questionnaire included four questions to elicit demographic data, and the second section comprised 16 questions focused on material preferences for conservative restorations, durability of composite restorations, and the most challenging stages the dentists faced during the composite restorative procedures.

RESULTS

Respondents decided most often to use composite materials for the tooth restorations (OR 997.4, 95% CI 233.8-4254.8, P value <.001). Most respondents indicated that the durability of composite restorations was approximately 7 to 10 years (41.5%). Among the factors affecting durability, maintenance of a dry cavity was the most often reported reason (47.1%) and the foremost challenge faced by dentists (61.0%) during the composite restorative procedures.

CONCLUSIONS

Our study confirmed that resin-based composites are the most popular material for direct restoration in many countries. Although working with this material is difficult and involves multiple steps, maintaining a dry cavity during bonding, and material application may affect the therapeutic success and durability of these restorations. Clinicians need to be attentive to this issue and be prepared to adapt their decision-making and consider opting for alternative restorative materials, if appropriate.

Long-Term Evaluation of Pulp Vitality Preservation in Direct and Indirect Pulp Capping: A Retrospective Clinical Study

Background: This retrospective clinical study aimed to assess dental pulp tissue reactions to direct and indirect pulp capping after 10 years of follow-up. Methods: A total of 276 permanent teeth with deep carious lesions were evaluated and divided into five groups: Group (1), direct pulp capping with Mineral Trioxide Aggregate cement; Group (2), direct pulp capping with a resin-based glass ionomer; Group (3), direct pulp capping with TheraCal; Group (4), indirect pulp capping with a three-step total-etch adhesive system; and Group (5), indirect pulp capping with a two-step self-etch adhesive system. Results: A 72.5% success rate was achieved overall. A statistically significant difference was found when comparing direct and indirect pulp capping with a success rate of 23.8% and 93.8%, respectively. For direct pulp-capping procedures, the area of pulp exposure was correlated with pulp necrosis (p = 0.035), while bleeding after exposure appeared independent (p = 0.053). Patient age was significantly related to the maintenance of pulp vitality (p = 0.013). A statistically significant correlation between the pulp-capping material and the occurrence of pulp necrosis was discovered (p = 0.017). For the indirect pulp-capping treatments, a significant correlation between patient age (p = 0.021) and the adhesive system (p = 0.019) with pulp necrosis was described. Conclusions: The pulp-capping material, patient age, and the width of the pulp exposure before the procedure should be carefully considered when performing direct pulp-capping treatments. The performance of the etch-and-rinse adhesive systems was superior to the self-etch system during the indirect pulp-capping procedures.

Comparative evaluation of incorporation of ferrule in premolars endocrown designs to check any alterations in their fracture resistance: A pilot study

Introduction

Endocrown preparation of endodontically treated teeth as final restoration has been extensively studied for different teeth. Bindl et al. questioned the application of endocrowns for premolars due to the pulp chamber space's smaller dimensions, which diminish bonding surface area. The addition of ferrule into the endocrown preparations of premolars has not been extensively studied.

Aims and Study Design

Comparative evaluation of incorporation of the ferrule in premolars endocrown designs to check any alterations in their fracture resistance.

Materials and Methods

The sample consisted of 40 maxillary first premolars without cracks or caries, extracted for orthodontic or periodontal purposes. The teeth were individually mounted with cold-cure acrylic resin. Group A: Composite endocrown without ferrule and Group B: Composite endocrown with ferrule. An endocrown former was prepared with elastomeric polyvinyl siloxane material (GC Exaclear). Endocrowns were then prepared with dual-cure core build-up composite-Core-x flow (Dentsply Maillefer, Switzerland) using the endocrown former so that morphologically, they all were almost identical. Endocrowns are cemented by dual-cure resin cement following manufacturer instructions. The fracture resistance of endocrowns with and without ferrule was evaluated and compared.

Results and Observations

The data were tabulated in Microsoft Excel and analyzed with SPSS version 24 software. The variables were presented with mean, standard deviation, and independent t-test. The P ≤ 0.05 is considered statistically significant. Group B (with ferrule) showed higher fracture resistance (622.06 N) than Group A (537.59 N) (without ferrule). Independent t-test showed that the difference was statistically significant (P = 0.008).

Conclusion

Comparing the failure load findings, it could be concluded that ferrule-containing endocrown needed greater loads than ordinary endocrown restorations for failure.

Effects of different surface treatments on surface topography and bond strength in the repair of fiber-reinforced dentin composite

OBJECTIVE

This study aimed to evaluate the effects of different surface treatments on the repair bond strength between a fiber-reinforced dentin composite and a posterior composite.

METHODS

Forty fiber-reinforced dentin composite resin blocks (4 mm × 4 mm × 4 mm) were separated into eight groups (n = 5) according to the surface preparation methods: (G1) negative control group, (G2) adhesive application, (G3) 50% dimethylsulfoxide (DMSO) application, (G4) 50% DMSO + adhesive application, (G5) 37% phosphoric acid etch + adhesive application, (G6) air abrasion + adhesive application, (G7) 37% phosphoric acid etch + 50% DMSO application + adhesive application, and (G8) air abrasion +50% DMSO application + adhesive application group. The composite surfaces were repaired in two layers with a posterior composite. Composite sticks were subjected to a micro tensile bond strength (μTBS) test. Fractured surfaces were evaluated using a stereomicroscope (×25). Short fiber-reinforced composite samples' surfaces were investigated by scanning electron microscope (SEM). Shapiro Wilk, one-way ANOVA, and Tukey HSD tests were used for statistical evaluation.

RESULTS

The highest average (μTBS) values were observed in G8, whereas the lowest mean μTBS values were evident in the G1 group. Statistically significant μTBS values were found in all adhesive-applied groups when compared with the negative control group. Notably, the application of 50% DMSO without adhesive did not lead to a statistically significant increase in μTBS values. SEM images demonstrated that acid etching partially eliminated residues on the composite surface, while air abrasion had a detrimental effect on the integrity of fiber structures.

CONCLUSION

In the repair of fiber-reinforced dentin composite with a posterior composite, adhesive application is an effective approach. The treatment of 50% DMSO without adhesive did not confer a statistically significant advantage, and the supplemental use of acid etch or air abrasion did not show an additional benefit compared to adhesive-only repairs.

CLINICAL SIGNIFICANCE

Adhesive application emerges as a potent and effective strategy for the repair of bur-roughened fiber-reinforced dentin composites. With its limitations, the study highlights the efficacy of adhesive-only repairs without the necessity for additional surface treatments.

Application and Future Utilization of Shellac in Orthodontics: A Systematic Review

Background: This review examines the application of shellac in orthodontics, focusing on its properties, advantages, and potential as an alternative to conventional materials. In orthodontics, where bond strength, ease of application, and removal are paramount, shellac's capabilities meet these needs while supporting environmentally friendly practices. Methods: With objectives centered on evaluating shellac's effectiveness, biocompatibility, and impact on patient outcomes, a comprehensive search across multiple databases was conducted, including PubMed, Scopus, and Web of Science. This study's selection criteria targeted studies assessing shellac's use in orthodontic applications, measuring treatment effectiveness, biocompatibility, and patient satisfaction while excluding those not directly involving orthodontic applications or lacking empirical data. Results: Through a qualitative synthesis of the extracted data-encompassing study design, sample size, treatment outcomes, and adverse effects-the findings reveal shellac's potential benefits in orthodontics, such as enhanced patient comfort and comparable treatment outcomes to traditional materials. However, the review also notes variability in study designs and outcomes, indicating the need for further research. Conclusions: This study concluded that shellac presents a promising alternative in orthodontic materials, recommending additional studies to standardize assessment methodologies and confirm its long-term advantages.

Attitude of Dental Students Toward Rubber Dam Application: A Cross-Sectional Study

Introduction The rubber dam (RD) system is globally recognized as an indispensable component of dental treatments, ensuring the highest standards of care. The use of RD isolation profoundly impacts the clinical aspects of dental procedures. The aim of this study was to assess the attitudes of dental students toward the use of RD, with an emphasis on evaluating the factors influencing its use among students at Umm Al-Qura University in Makkah city, Kingdom of Saudi Arabia. Methods An online questionnaire was distributed to a population sample of 203 undergraduate dental students in their clinical years at Umm Al-Qura University. Questions covered various aspects, including the frequency of RD use, perceptions of its effectiveness, and prospective intentions for its future use, as well as factors influencing these attitudes. Statistical analysis was performed using SPSS software Version 26 (IBM Corp., Armonk, NY, USA). In addition, the chi-square test and Fisher-Freeman-Halton exact test were used for the comparison of the data at a significance level of p<0.05. Results The questionnaire was completed by 191 participants, with a response rate of 95.5%. Of the students, 189 (99%) used RD during operative procedures for adhesive restorations. Furthermore, 157 (82.2%) students agreed that proper isolation cannot be achieved without RD application. All the advantages of RD application were recognized by 165 (85.9%) of the students. Notably, there was a significant association between the factors limiting the RD application and the students' academic year (p<0.05), with senior students reporting fewer limitations. Responses indicated that 163 (85.3%) of the students received satisfactory training for RD and 165 (86.4%) students had a high intention to continue using RD following graduation. Conclusion Within the limitations of this study, it can be concluded that the results presented a positive attitude toward RD use. However, there is a continued necessity to enhance education and advocate consistent RD application for improved patient care and clinical outcomes.

Performance of self-cured versus light-cured universal adhesive in patients with non-carious cervical lesions: 18-month randomized clinical trial

OBJECTIVE

To evaluate the clinical performance of self versus light-cured universal adhesive in non-carious cervical lesions (NCCLs) after 18 months.

MATERIALS AND METHODS

Sixty-eight NCCLs in 28 patients were divided into two equal groups; G1: self-cured universal adhesive (Palfique,Tokuyama,Japan) and G2: light-cured universal adhesive (Single Bond Universal,3 M ESPE,USA). Nanohybrid resin composite (Z350XT, 3 M ESPE, USA) was used as a final restoration. Evaluation for fracture, loss of retention, marginal adaptation and discoloration were done after 1 week, 6,12, and 18 months using FDI criteria. Postoperative sensitivity was assessed after 1 week. Chi-Square and Mann-Whitney tests with statistical significance at (P ≤ 0.05) were used for intergroup comparison,while the intragroup one was performed using the Cochran's Q and Friedman's tests. Survival rate was analyzed using Kaplan-meier and Log-rank test.

RESULTS

Both groups exhibited fracture and retention loss, however, there was statistically significant difference favoring the control group at 6 months (p = 0.0114,0.0016). For secondary outcomes, marginal adaptation and discoloration revealed no significant differences. For postoperative sensitivity, there was a significant difference favoring the control group (p = 0.0007, 0.0011). Palfique had 1.5 Relative-Risk (RR) after 6 months (95% CI 0.5659-4.2617; P = 0.3928) and 20% less risk of failure after 18 months (RR 0.8) (95% CI 0.4618-1.3858; P = 0.4260). Tested adhesives showed equal survival rate (P = 0.5685).

CONCLUSIONS

Both adhesives revealed similar clinical performance in restoring the NCCLs after 18 m, however, the early failure was more frequent in the self-cured universal adhesive.

Dentin adhesion of bulk-fill composites and universal adhesives in class I-cavities with high C-factor

OBJECTIVES

The aim of this study was to compare the dentin adhesion of bulk-fill composites in high C-factor class I-cavities before and after thermocycling to a control group using incremental layering technique.

METHODS

A standardized class I-cavity was prepared into 195 human molars, then different universal adhesives were applied either in self-etch or etch & rinse mode, and the cavity was filled according to each materials application protocol. The material combinations used were a conventional layered composite as control, the respective bulk-fill product, two other bulk-fill composites made by different manufacturers, with one of them being tested using two different polymerization times. Furthermore, one thermoviscous bulk-fill composite and one self-adhesive restorative were examined of which the latter can only be applied in self-etch mode. In each group the dentin adhesion to the cavity bottom was measured using microtensile bond strength test initially (24 h water storage) and after thermocycling. All results were statistically analyzed using STATA 17.0.

RESULTS

The statistical analysis showed significant differences between the control and the experimental groups (p < 0.001). The highest mean bond strength before (14.8 ± 10.7 MPa) and after aging (14.2 ± 11.5 MPa) was measured for the etch & rinse-control group. Among the bulk-fill groups, the etch & rinse technique consistently showed higher bond strengths. Bond strength of groups with shortened polymerization did not exceed 2.1 MPa. The bond strength of the self-adhesive restoration material was low before and after thermocycling (2.7 MPa/ 0.0 MPa). Groups with low bond strength values showed a high number of pre-testing-failures.

CONCLUSIONS

Bulk-fill materials used in high C-factor class I-cavities showed lower bond strength during self-etch application. The same applies for a shortened polymerization regime, which cannot be recommended for high C-factor cavities.

CLINICAL SIGNIFICANCE

Today, a large variety of materials and application techniques can be used when placing an adhesive restoration. Whether new instead of established procedures should be applied in high C-factor cavities has to be critically assessed, as they are a demanding scenario for adhesive restorations.

Comparison of the Effect of Different Bonding Agents on the Microleakage of Two Hydrophilic Pit and Fissure Sealants: An Ex Vivo Study

Aim

To compare the impact of fifth- and seventh-generation bonding agents on the microleakage between Embrace WetBond sealants and Ionoseal.

Materials and methods

Forty extracted human premolar teeth were used for the study and grouped according to different sealants and bonding agents-group I: Embrace WetBond sealant with fifth-generation bonding agent; group II: Embrace WetBond sealant with seventh-generation bonding agent; group III: Ionoseal with fifth-generation bonding agent; group IV: Ionoseal with seventh-generation bonding agent. For microleakage evaluation, all the teeth were subjected to invasive sealant placement using the respective sealant materials in combination with bonding agents as specified. The treated teeth were stored at 37°C for 24 hours and then thermocycled for 100 cycles at temperatures of 5°C and 55°C with a dwell time of 30 seconds. In order to assess microleakage, the samples were immersed in 0.2% methylene blue dye for 24 hours, then sectioned in buccolingual direction, and evaluated under stereomicroscope.

Results

The mean microleakage scores in group III were highest at 0.90 ± 0.57, while the least was in group IV at 0.30 ± 0.68, indicating that Ionoseal with seventh-generation bonding agent was the most effective. However, when the mean microleakage scores of the four groups were compared using Kruskal-Wallis test, it indicated that the differences were not statistically significant.

How to cite this article

V R, P P, A A, et al. Comparison of the Effect of Different Bonding Agents on the Microleakage of Two Hydrophilic Pit and Fissure Sealants: An Ex Vivo Study. Int J Clin Pediatr Dent 2024;17(3):270-273.

Bonding performance and interfacial adaptation of modern bulk-fill restorative composites after aging in artificial saliva: an in vitro study

OBJECTIVES

This study aimed at comparing the microtensile bond strength (MTBS) and interfacial adaptation of a modern self-curing and a light-curing restorative bulk-fill composite to a conventional composite applied with the layering technique.

METHODS

Forty-eight occlusal cavities were divided in three main groups (16/group) based on tested materials: (i) STELA, bulk-fill self-curing restorative (STELA, SDI Ltd.); (ii) 3 M-BULK, bulk-fill composite (Filtek One Bulk-Fill, 3 M Oral Care); and (iii) 3 M-CTR, a conventional composite (Filtek Supreme XTE, 3 M Oral Care). These were used in combination with their adhesives in self-etch (SE) or etch-and-rinse (ER) mode. Specimens stored in artificial saliva (24 h or 12 months) were evaluated for MTBS and fractography. The interfacial analysis was performed through confocal microscopy. ANOVA and Fisher's LSD post hoc tests were performed with a level of significance of 5%.

RESULTS

All the tested materials applied in ER mode presented (24 h) greater bond strength than in SE mode. Although all materials showed a significant drop in the bond strength after prolonged storage, STELA showed the highest bonding performance and interfaces with few gaps. 3 M-BULK had the lowest bond strength and an interface with several voids and gaps.

CONCLUSIONS

All materials were affected by interface degradation and bonding reduction over prolonged aging. However, their use in combination with adhesives applied in ER mode may offer greater immediate bonding performance.

CLINICAL RELEVANCE

The use of restorative light-curing bulk-fill composites may generate gaps at the bonding interface and voids. STELA may represent a suitable alternative to avoid such issues.

Evaluation of the Curing of the Primer on Shear Bond Strength of Orthodontic Brackets: An Original Research

Background

The aim of this study was to evaluate the effect of separately curing the unfilled resin for increased bond strength of the orthodontic brackets as the literature shows both studies that support and contradict this aspect.

Methodology

The sample consisted of 120 specimens randomly grouped into four of 30. The tooth was cleaned of tissue and debris and stored in a distilled water solution until the procedures of bonding. The surface of the enamel was conditioned with pumice, and acrylic blocks were designed for the tooth to be mounted onto them. The buccal surfaces of all the teeth were prepared by etching the enamel with 37% phosphoric acid for a time period of 30 seconds and washed for 20 seconds under running water. Stainless steel brackets (Victory Series™ MBT, 0.022 Slot) were used for all the samples in the study, and the bonding procedure was conducted on the same day for all the groups. The artificial saliva was used for the storage of samples for 24 h after bonding, and shear bond strength testing was conducted using an Instron machine in shear or peel mode at a crosshead speed.

Results

The highest mean bond strength calculated was for the conventional technique (17.45 mpa), while it was the lowest for no primer adhesive (11.21 mpa). Group IV had a greater distribution of ARI scores than groups I, II, and III.

Conclusion

Group IV achieved the highest bond strength when compared to other groups, with an ARI score of 3. Group III had less bond strength, likely due to incomplete curing of the primer due to insufficient exposure to light. Transbond XT can be used without primer, making bonding, debonding, and cleaning procedures easy and less time-consuming.

Adhesive Bond Strength of Restorative Materials to Caries-Affected Dentin Treated with Antimicrobial Photodynamic Therapy: A Systematic Review and Meta-Analysis

Objective: This systematic review aimed to evaluate the adhesive bond strength of restorative materials to caries-affected dentin (CAD) treated with antimicrobial photodynamic therapy (aPDT) in comparison with conventional chemical disinfectants. Methods: Three databases, including the Web of Science, Scopus, and PubMed, were searched to address the focused question: "What is the effect of aPDT compared to conventional chemical disinfection techniques on the adhesive bond strength of restorative materials to CAD?." Search keywords included "dentin*" "adhes bond*" "caries-affected dentin" "photodynamic "photochemotherapy" "photosensitizing agent" "phototherapy" "photoradiation" "laser" "light activated" "photoactivated." A fixed-effects model was used in each meta-analysis and the inverse variance was used to calculate the standard mean difference (SMD). For evaluating the statistical heterogeneity, the Cochrane's Q test and the I2 statistics were used. The risk of bias was evaluated based on the Cochrane Collaboration's tool. Results: Fourteen studies were included in the qualitative as well as quantitative analysis. The results of the meta-analyses exhibited an SMD of 2.38% [95% confidence interval (CI): 2.03-2.73; p < 0.00001], indicating a statistically significant difference in the shear bond strength scores between the tested group (samples treated with aPDT) and the control group (i.e., favoring the sound dentin and/or conventional chemical disinfectants). Contrarily, an SMD of -1.46% (95% CI: -2.04 to -0.88; p < 0.00001) and -0.37% (95% CI: -0.70 to -0.03; p = 0.03) was observed, indicating a statistically significant difference in the microtensile bond strength (μTBS), as well as microleakage scores between the tested group (favoring the samples treated with aPDT) and the control group (i.e., sound dentin and/or conventional chemical disinfectants). Conclusions: Adhesive bond strength of restorative materials to CAD treated with conventional chemical disinfectants showed superior outcomes compared to photodynamic therapy (aPDT).

Comparison of postoperative hypersensitivity between Total-etch and Universal adhesive system: a randomized clinical trial

The objective was to determine the postoperative hypersensitivity of two-step Total-etch as compared to one-step Universal adhesives followed by composite restorations on 100 patients by applying Total-etch on one tooth and Universal adhesive on another tooth. The bonds and teeth were randomly selected. Postoperative hypersensitivity was recorded by visual analog scale before, immediately after, and 24 h after the restoration using cold stimulus. The Mann-Whitney test was applied for statistical comparison of postoperative hypersensitivity between the two bonds as well as for any significant difference in genders with each bond. No significant difference was found between postoperative hypersensitivity of the two adhesives before (p-value = 0.57), immediately after (p-value = 0.604), and 24 h after (p-value = 0.728) the restoration. Males showed more hypersensitivity with Total-etch as compared to females before (p-value = 0.037), immediately after (p-value = 0.047), and 24 h after the restoration (p-value = 0.022). No significant difference was found between gender and Universal adhesive at all three stages (p-value > 0.05). The results suggest no significant difference in postoperative hypersensitivity between the two materials when good sample size and proper technique were observed along with the removal of bias like different patients having different pain perceptions and multiple operators having different operating skills. Males showed more hypersensitivity to Total-etch.Trial registration number: Australian New Zealand Clinical Trials. Registry number: ACTRN12622001213730. (Retrospectively registered: 09/09/2022).

Etch-and-rinse versus self-etch strategy of a universal adhesive in different application methods at the bonding interface of fiber post cementation

OBJECTIVE

To evaluate the effect of etch-and-rinse (ER) versus self-etch (SE) strategies of a universal adhesive applied with a manual brush (MB) or rotary brush (RB) on the bonding interface of fiber post cementation.

METHODS

Forty bovine incisor roots were prepared and divided into four groups according to the methods of application and strategy of universal adhesive use (MB-ER, RB-ER, MB-SE and RB-SE). After 6 months, specimens from different thirds of the post space were evaluated of push-out strength, analysis of adhesive failure patterns, and extent of tags.

RESULTS

The RB-ER and RB-SE groups showed the highest bond strength values in the cervical and middle thirds of the post space. Cohesive adhesive failure had the highest incidence in the different thirds of the post space in the ER strategy, regardless of the adhesive application method. The RB-ER group showed the highest tag extensions.

CONCLUSIONS

The protocols of universal adhesive application with RB provided the greater bond strength, but only the ER strategy favored the formation of a greater extension of tags at the adhesive interface.

CLINICAL SIGNIFICANCE

The application of universal adhesive with RB into the post space increases the strength of the post-cemented fiber bond.

Resin cement selection for different types of fixed partial coverage restorations: A narrative systematic review

OBJECTIVE

The aim of this study was to review the selection criteria of resin cements for different types of partial coverage restorations (PCRs) and investigate if the type of restorations or restorative materials affect the type of selected resin cement.

MATERIALS AND METHODS

An electronic search (1991-2023) was performed in PubMed, Medline, Scopus, and Google Scholar databases by combinations of related keywords.

RESULTS

A total of 68 articles were included to review the selection criteria based on the advantages, disadvantages, indications, and performance of resin cements for different types of PCRs.

CONCLUSIONS

The survival and success of PCRs are largely affected by appropriate cement selection. Self-curing and dual-curing resin cements have been recommended for the cementation of metallic PCRs. The PCRs fabricated from thin, translucent, and low-strength ceramics could be adhesively bonded by light-cure conventional resin cements. Self-etching and self-adhesive cements, especially dual-cure types, are not generally indicated for laminate veneers.

Clinical performance of light-cured orthodontic adhesives for bonding brackets - an in-vitro study

Background

The dental profession is seeing a constant influx of new adhesive systems from manufacturers, each claiming to be more dependable than the last. This study assessed the bond strength and adhesive remnants of different light-cured adhesives used for bonding metal brackets to teeth.

Methods

80 extracted maxillary premolars with the sound crown structure were acid etched and bonded with brackets on their buccal surfaces utilizing primer and light-cured adhesives into four equal groups, which are Transbond XT, Heliosit, Enlight, and Bracepaste. Shear bond strength (SBS) for de-bonding the brackets were evaluated with Instron- testing machine after 48 hours. The de-bonded samples' adhesive remnant index (ARI) scores were also measured.

Results

The maximum mean SBS was found for Transbond XT (12.91 ± 2.0 MPa), followed by Bracepaste (12.87 ± 1.59 MPa), Enlight (11.77 ± 1.87 MPa), and lowest for Heliosit (10.93 ± 1.71 MPa). According to the four point scale, adhesive remnant index (ARI), Transbond XT has the least adhesive residue left on the tooth, followed by Heliosit. Enlight and Bracepaste have a similar distribution of adhesive, with both having a maximum amount left.

Conclusion

It can be inferred that all groups involved demonstrated a satisfactory level of bond strength from a clinical perspective. Transbond XT is the preferred orthodontic adhesive over the other three adhesives due to its superior SBS and ARI properties.

Do different adhesives influence the color stability and fluorescence of composite restorations after aging?

This study aimed to evaluate the influence of dental adhesive color on the chromatic stability and fluorescence intensity of composite resin restorations of different thicknesses. Ninety bovine enamel samples were obtained and restored with resin composite varying thicknesses of restorative material and enamel (1.0 mm enamel and 1.0 mm composite; 1.5 mm enamel and 0.5 mm composite; 0.5 mm enamel and 1.5 mm composite). The restorations were made of composite resin (Opallis E-bleach H) using different types of dental adhesives: Ambar, Ambar APS, and Single Bond Universal (n=10). The samples were subjected to color measurement tests in a spectrophotometer using CIEDE2000 and fluorescence intensity measurements before and after aging in a red wine coloring solution. Data were subjected to analysis of variance (ANOVA) and Tukey's test (α = 0.05). There were no statistically significant changes in color stability or fluorescence intensity for restorations made of different materials or thicknesses (p>0.05). Single Bond Universal showed greater color stability at 0.5 mm thickness (ΔE00 = 4.4 ± 1.6) compared to other thicknesses of the same material (p=0.003), as well as a greater difference in fluorescence intensity after aging at 1.5 mm thickness (-414.9 ± 103.8) compared to other materials (p=0.0002). Overall, it was concluded that the different adhesive systems did not influence the color stability and fluorescence of restorations of different thicknesses.

Evaluating the effect of poly (amidoamine) treated bioactive glass nanoparticle incorporated in universal adhesive on bonding to artificially induced caries affected dentin

BACKGROUND

The purpose of this study was to evaluate remineralisation and its effect on microtensile bond-strength of artificially induced caries affected dentin (CAD) when treated with a commercial universal adhesive modified with poly(amidoamine) dendrimer (PAMAM) loaded mesoporous bioactive glass nanoparticles (A-PMBG).

MATERIAL AND METHODS

Mesoporous bioactive glass nanoparticles (MBG) were synthesised using sol-gel process, where PAMAM was loaded (P-MBG) and added to commercial adhesive at different weight percentages (0.2, 0.5, 1 and 2 wt%). First, rheological properties of commercial and modified adhesives were evaluated. The effect of remineralization/hardness and microtensile bond-strength (MTBs) of those samples that mimicked the rheological properties of commercial adhesives were evaluated using Vickers hardness tester and universal testing machine respectively. Scanning-Electron microscope was used to visualize failed samples of MTBs and remineralization samples. Both evaluations were carried out at 1-,3 and 6-month intervals, samples being stored in stimulated salivary fluid during each time interval.

RESULTS

Addition of nanoparticles altered the rheological properties. With increase in the weight percentage of nanoparticles in commercial adhesive, there was significant increase in degree of conversion, viscosity and sedimentation rate (p < 0.05). The 0.2 and 0.5 wgt% groups closely mimicked the properties of commercial adhesive and were evaluated for remineralization and MTBs. After 6 months, 0.2wgt% group showed increased MTBs (p < 0.05) and 0.5wgt% group increased remineralization/hardness (p < 0.05).

CONCLUSION

The complex of PAMAM-MBG-Universal adhesive can remineralize the demineralised CAD thereby improving its bond-strength when evaluated for up to 6-months.

Effect of Modified Triple-Layer Application on the Bond Strength of Different Dental Adhesive Systems to Dentin

The goal of this article was to assess the effect of modified triple-layer application (MTLA) in conjunction with the active bonding technique on the bond strength of four adhesive systems to dentinal substrate. The adhesives tested were Prime&Bond Universal (PBU), OptiBond Universal (OBU), OptiBond FL (OBFL), and Clearfil SE (CSE). The adhesives were applied according to the following strategies: single active application (A) and triple adhesive layer application including Active-Passive-Passive (APP); AAP; and AAA. The micro-tensile bond strength test was evaluated following 24 h or 6 months of storage. The composite-dentin interface morphology was investigated using scanning electron microscopy. The data were statistically analyzed with a significance level of α = 0.05. At 24 h of aging, all of the factors tested were not significant (p > 0.05) for CSE. For OBFL, OBU, and PBU, statistically higher values were observed for the A technique (p < 0.05). Plus, there were no significant variances between the APP, AAP, and AAA techniques (p > 0.05) for OBFL and PBU. However, for OBU, there were no significant differences between the A and AAA techniques (p > 0.05). After 6 months of aging, the A technique showed statistically higher values when compared to the other techniques (p < 0.01), except for OBFL, where the A and AAA techniques showed promising outcomes. When comparing the bond strength values of 24 h and 6 months, only for PBU, all of the techniques used resulted in bond strength stability over time (p > 0.05). Thicker adhesive layers were observed when MTLA was applied. Only the OBFL adhesive showed the formation of resin tags in all of the modalities tested. The bonding performances of the different application techniques used were material-dependent.

Effects of Short-Term Exposure of Chloramine-T Solution on the Characteristics of Light-Cured and Chemical-Cured Adhesives

This study evaluated the effect of a 0.5% chloramine T solution on a chemical-cured universal adhesive by comparing the light-cured, one-step, self-etch adhesive for the bonding performance, mechanical properties, and resin-dentin interfacial characteristics. Caries-free human molars were randomly assigned into eight groups based on the bonding systems employed (Bond Force II, BF and Bondmer Lightless, BL), the immersion solutions used before bonding (0.5% chloramine T solution and distilled water), and the immersion durations (5 and 60 min). Microtensile bond strength (μTBS), nanoleakage evaluation, and nanoindentation tests were performed, and the surface morphology of the resin-dentin interface was examined using a focus ion beam/scanning ion microscopy system. Immersion in chloramine-T for 5 min significantly decreased the μTBS of Bondmer Lightless (from 22.62 to 12.87 MPa) compared with that in distilled water. Moreover, there was also a decreasing trend after immersing in chloramine-T for 60 min (from 19.11 to 13.93 MPa). Chloramine T was found to have no effect on the hardness, elastic modulus, or morphological characteristics of the ion-beam milled resin-dentin interfacial surfaces in the tested adhesives, suggesting that chloramine T might reduce the bond strength by interfering with the interaction and the sealing between the adhesive resin and dentin in the chemical-cured universal adhesive, albeit without affecting the mechanical properties.

Effect of limonene associated with bioactive glass-ceramic on dentin/adhesive interface

This study evaluated the effect of pretreatment with limonene and/or biosilicate on the bond strength of a universal adhesive system in self-etch mode to dentin. Occlusal cavities were prepared in 80 human molars and the teeth were randomly allocated to one of four groups (n = 20), according to the pretreatment regimens applied before the adhesive. The pretreatments were (i) Control, no pretreatment, (ii) LIM, 0.5% limonene; (iii) Bio, 10% biosilicate; and (iv) LIMBio, LIM + Bio. After adhesive application and restoration, the specimens were sectioned into sticks, separated, and stored in distilled water at 37°C for 24 h or 6 months. Microtensile bond strength test was carried out and measurements were compared across pretreatment groups and storage times. Fracture patterns and adhesive interfaces were observed. Loss of dry mass was calculated (n = 10). There was no statistically significant difference in the bond strength between the groups and the most prevalent fracture pattern was the non-adhesive. LIM and LIMBio resulted in more open dentinal tubules. LIM and Bio, whether separate or combined, showed particles of those substances, which decreased in size and number after 6 months. All groups lost mass weight after treatment, with no statistically significant differences between them. Limonene and biosilicate pretreatment did not affect the bond strength to dentin of the universal adhesive system, but resulted in more non-adhesive fractures, even after 6 months.

Comparative Evaluation of Microleakage With Total-Etch, Universal (Self-Etch Mode), and Nano Adhesive Systems in Class V Composite Restorations: An In-Vitro Study

OBJECTIVES

The adhesion of bonding agents and their longevity are of interest to dentistry. Microleakage remains the major cause of composite restoration failures, which in turn depends on bonding between the restorative material and tooth substrate. The objective of this study is to evaluate and compare the microleakage with total-etch, universal, and nano adhesive systems in Class V composite restorations, utilizing a dye penetration method.

METHODS

Forty-five extracted premolars were included in the present study, and a Class V cavity on the facial surface of each tooth was prepared. The samples were divided into three groups of 15 teeth each depending on the bonding agents used, following which composite restoration was done. Specimens were thermocycled, and nail varnish was applied except around the restorations. Specimens were then immersed in 2% methylene blue for 24 hours and rinsed; sectioning was done and viewed under a stereomicroscope with 10X magnification.

RESULTS

The mean microleakage score was reported to be significantly higher in the universal adhesive system in the self-etch mode (3.60 ± 0.55) when compared with the total-etch adhesive system (2.40 ± 0.55) and least in the nano adhesive system (1.20+.45) (p value <.05).

CONCLUSION

The study findings revealed that nano adhesives showed lesser microleakage as compared to total-etch and universal adhesive systems.

CLINICAL SIGNIFICANCE

The study strengthens the findings that the nano adhesives have reduced microleakage, resulting in better marginal integrity and increased longevity of restoration. This study signifies that an eighth-generation bonding agent is reported to be better than the other bonding agents used in this study.

[Evolution and effectiveness of seventh and eighth generation adhesive systems in direct restorations. a review]

Introduction

: Dental adhesion is responsible for the chemical processes of dentin-enamel union for a correct choice before its application in restorative treatments; it is important to know properly the generation to which it belongs, its properties, application techniques, etc. All this is to ensure success in the procedures to be performed. Currently, adhesive systems have evolved, and 8 generations are available in the market, each with a better-quality standard than the previous one.

Objective

To identify which generation of the adhesive system is the most viable to be applied in direct dental restorative treatments.

Materials and methods

We reviewed and compiled 133 articles published from 20 years ago to date. After analyzing them according to their clinical relevance, 88 were excluded, the remaining articles were reanalyzed, of which only those focused on describing the generations of adhesive systems applied in direct restorations were selected, leaving a total of 56 articles, which included clinical case reports. The Google Scholar search engine, SciELO and databases of interest, such as PubMed, Scopus and Medigraphic, were used, three reviewers independently performed the analysis and search of data, and the keywords were used; adhesive systems, generations of adhesive systems, evolution, and direct restorations.

Results

: 56 articles were evaluated, according to their relationship with the subject and with the information previously sought, it was determined that the seventh generation of adhesive systems is the most viable to be applied in dental treatments, due to the improvements it presents in its characteristics, and the results with good prognosis mentioned by both dental professionals, as in research.

Conclusion

The advancement of technology implies new knowledge; therefore, the effectiveness of adhesive systems has changed significantly. Scientific evidence has shown that seventh-generation adhesives are more effective in direct restorations.

Comparison of the translucency parameters and bond strength of 5Y-ZP zirconia, 3-YTZP zirconia, and lithium disilicate

Background

E-max is a more aesthetic material than traditional zirconia. In addition, the bond strength of traditional zirconia with adhesive cements is lower. There are not enough studies on how the aesthetic values and bond strength of 5-YZP, the new generation zirconia, compare to e-max and traditional zirconia. Can 5-YZP be an alternative to e-max in terms of aesthetics and bond strength?

Aim

The aim of the study is to compare the translucency property and bonding ability of 5y-zp zirconias with previous generation zirconias and lithium disilicate.

Materials and Methods

Two types of zirconia Katana UT and Katana HT for measuring translucency values; and using a type of lithium disilicate IPS e.max CAD LT, three groups were formed (n = 10). Translucency specimens were fabricated (n = 10). Their L*a*b* values were measured against a black-and-white background with a spectrophotometer, and DE00 was calculated. To perform micro-shear tests, a cylinder design was made from zirconia and IPS e.max CAD blocks (n = 20). After the samples were aged by thermal cycle, the micro-shear test was applied to specimens cemented to teeth extracted with two different adhesive cement systems.

Results

According to the results of one-way analysis of variance, a statistically significant difference was found between the translucency parameter (TP) values of the groups. According to Tukey's honestly significant difference (HSD) multiple comparisons, the values of the three groups are statistically different from each other. Although IPS e.max CAD group has the highest TP values, the Katana HT group has the lowest values.

Conclusion

5Y-PZ has a TP intermediate to those of 3Y-TZP and lithium disilicate. Long-term bond strength of 3Y-TZP and 5Y-ZP were similar to those of lithium disilicate. To be an alternative to glass ceramics in the anterior region, translucency and bond strength values need to be improved.

Effectiveness of Different Application Modalities on the Bond Performance of Four Polymeric Adhesive Systems to Dentin

One of the major goals of adhesive dentistry is to improve the interaction of the already-existing adhesives with different substrates by using different application techniques. Thus, the objective of the present in vitro study was to assess the bond performance of four adhesive systems, Prime&Bond Universal (PBU), Clearfil SE Bond (CSE), OptiBond Universal (OBU), and OptiBond FL (OBFL), to dentin using various application modes: passive application (PA), active application (AA), Compo-Vibes modified application (CVM), and Compo-Vibes application (CV). Eighty extracted human molars were allocated into four groups based on the application modalities tested. The micro-tensile bond strength as well as fracture mode were tested in accordance with ISO/TS 11.405 after 24 h and 6 months of aging. Adhesive contact angle (CA) and scanning electron microscope analysis were also performed (n = 3). Statistical tests were performed with α = 0.05. After 24 h, a significant difference with a higher bond strength value was found for PBU in the AA modality and for CSE in the CVM modality (p < 0.05). However, no significant difference was shown between the techniques used among the other adhesives (OBFL and OBU). Moreover, at 24 h, only the PA demonstrated significant differences between the tested materials (p < 0.05). After 6 months, CSE, PBU, and OBU demonstrated significant differences between the techniques (p < 0.05), with a higher bond strength for CSE in AA and CVM modalities, for PBU in AA modality, and for OBU in AA and PA modalities. No significant differences were found between the techniques used among the OBFL (p > 0.05). In addition, only the CVM technique demonstrated significant differences between the tested materials after 6 months. CV and CVM showed a decreased value after aging for CSE and PBU, respectively. However, all the modalities decreased for OBU and OBFL after aging. All the adhesives showed marked resin infiltration into dentinal tubules in AA among all the modalities tested. Both universal adhesive systems (OBU and PBU) demonstrated statistically lower CA when compared to the other systems (CSE and OBFL) (p < 0.05) when applied in the PA mode. Concerning the AA mode, only CSE and OBFL were tested. The AA demonstrated lower CA values compared to the same adhesives in PA (p < 0.05). It could be concluded that the bond strength could be influenced by both materials and application techniques. It seems that the AA technique could be recommended as a gold standard for the application of an adhesive system to dentin. Plus, the CV and CVM modalities after 6 months of aging were considered stable for PBU and CSE, respectively. Consequently, the performance of these adhesive systems might vary when applied to other modalities. Future studies are needed to test this hypothesis.

Effect of the Adhesive Strategy on Clinical Performance and Marginal Integrity of a Universal Adhesive in Non-Carious Cervical Lesions in a Randomized 36-Month Study

The effectiveness of a universal adhesive applied in three application modes for the preparation of Class V composite restorations was evaluated both clinically and by quantitative marginal analysis (QMA) over 36 months. In 50 patients, three (n = 21) or four (n = 29) non-carious cervical lesions (NCCL) were restored with Venus® Diamond Flow (Kulzer GmbH, Hanau, Germany). The adhesive iBond® Universal (iBU, Kulzer, Germany) was used in self-etch (SE), etch-and-rinse (ER), or selective-enamel-etch mode (SEE). The etch-and-rinse adhesive OptiBondTM FL served as a control (OFL, Kerr GmbH, Herzogenrath, Germany). The restorations were clinically assessed (FDI criteria) at 14 days (BL), 6, 12, 24, and 36 months. Additionally, QMA was conducted on all restorations of 11 randomly selected patients. FDI criteria and marginal gap and perfect margin were compared between and within groups and recalls using McNemar, Wilcoxon, or Mann-Whitney U-tests (α = 0.05). Starting with 12 months, cumulative failure rates were lower in iBU-SE (0.0%, p = 0.016) and iBU-ER groups (2.1%, p = 0.07) compared to OFL (16.7%). At two years, iBU-SEE also showed fewer failures (0.0% SEE vs. 34.6% OFL, p = 0.016), as did iBU-SE compared to iBU-ER after 36 months (2.2 and 19.6%, p = 0.039). From BL, the iBU-SEE group always had the fewest marginal gaps and the highest percentage of perfect margins. From BL, iBU-SEE (0%, p = 0.008) and iBU-ER (0.2%, p = 0.027) showed significantly fewer marginal gaps compared to OFL (2.5%) and more perfect margins were found with iBU-SEE starting at 6 months (p = 0.054). The SEE and ER modes ensured the most excellent marginal quality, with differences from the control appearing earlier with QMA than clinically. In restoring NCCls, iBU showed superior clinical performance over OFL, especially in modes SE and SEE.

Evaluation of different decontamination procedures on bond strength to sound and caries affected dentin using "no-wait" universal adhesive

BACKGROUND

Current study aimed to evaluate the effect of different decontamination procedures on micro-shear bond strength (μSBS) of sound (SoD) and caries-affected dentin (CAD) of two universal adhesives after blood-saliva contamination.

METHODS

One hundred and eighty bovine anterior teeth were prepared and allocated into the respective groups according to tested dentin substrates [SoD, CAD], universal adhesives [Clearfil Bond Universal Quick (UBQ), All-Bond-Universal (ABU)], adhesive contamination stage [none, contamination before and after adhesives light-curing], and according to decontamination procedures [no decontamination, water rinsing, adhesive rebond, Ethylenediaminetetraacetic acid (ETDA) and chlorhexidine (CHX) application]. Universal adhesives were applied according to manufacturer instructions in self-etch (SE) bonding mode. Four composite microrods were built for each tooth. Specimens were kept in distilled water for 24 hours at 37°C before testing μSBS. Four-way ANOVA and Tukey HSD tests were used for data analysis.

RESULTS

A statistically significant difference between contamination stages of both universal adhesives at different decontamination procedures for SoD and CAD. Highest μSBS was recorded for UBQ control group at SoD, while the least was recorded for light-cured ABU upon water rinsing decontamination procedure of CAD.

CONCLUSIONS

Proper cavity isolation is mandatory to avoid possible contamination which can dramatically affect μSBS. CHX is a potent cavity decontaminant that can restore different dentin substrates bond strength. EDTA presents a promising substitute. UBQ adhesive showed better bonding performance than ABU to both dentin substrates. Application of regular cavity decontamination approaches is highly advised in daily practice to avoid possible detrimental effect of accidental cavity contamination.

The Classification and Selection of Adhesive Agents; an Overview for the General Dentist

Adhesive agents are essential to most restorative procedures used in everyday practice. Depending on the clinical situation, the dentist will choose among a rapidly evolving variety of adhesive agents (bonding agents). Due to the availability of many adhesive agents, appropriate selection can take time and effort. Typically, a practitioner relies more on marketing and experience than in-depth material knowledge. The classification of adhesive agents may need to be clarified and easier to remember due to its lack of relevance to clinical procedures. This paper reviews the published literature retrieved from PubMed, Google Scholar, and Scopus by using specific keywords "adhesive agents", "classification", "dentin", "enamel", "universal", "self-etch", "etch-and-rinse", and "bonding". The titles and abstracts were screened, and the relevant literature was retrieved. The list of references from each identified article was examined to find other potentially relevant articles. Adhesive agents can be classified as etch-and-rinse, self-etch, or "multi-mode" according to their approach to interacting with the smear layer, and each approach can be further classified according to the number of clinical steps required during application. This article reviews the classification of current adhesive agents and discusses the properties that make a specific adhesive agent the optimal choice for a particular clinical indication. The review will assist the general dentist in understanding the various types of available adhesive agents and how they function. Overall, the review will facilitate decision-making and allow the selection of appropriate materials.

Adhesion to enamel and dentine: an update

With the continuous development of adhesive technology leading to a wide variety of bonding systems in the market, clinicians are often faced with a vast number of systems to choose from. Although research and manufacture of bonding systems is constantly progressing, the focus has generally been on simplifying the bonding process by reducing the number of clinical steps, with little emphasis on evidence-based performance. This article draws attention to the current strategies of common commercially available products to guide clinicians during bonding system selection and application.

Comparative Study on Interface Fracture of 4th Generation 3-Steps Adhesive and 7th Generation Universal Adhesive

The purpose of this paper is to compare the fracture behavior of interfaces obtained using fourth-generation and universal dental adhesives. The study relies on optic and SEM to evaluate the dentin-adhesive-restoration material interface of the samples and also on FEA simulation of fracture behavior. Specimen fabrication relied on 20 extracted teeth, in which class I cavities were created according to a protocol established based on the rules of minimally invasive therapy. For the direct adhesive technique, the adhesives used were: three-step All Bond, three-batch A and one-step Clearfil Universal Bond Quick-batch B. The restoration was performed with the same composite for both adhesives: Gradia direct posterior. The simulation used a 3D reconstructed molar on which geometric operations were performed to obtain an assembly that replicated a physical specimen. Material properties were applied to each component based on the information found in the literature. A simplified model for crack propagation was constructed, and using the fracture mechanics tool in Ansys 2019, the stress intensity factors that act at the crack tip of the adhesive interface were obtained. Mechanical simulation and microscopic investigation showed us how the interface of the dentine-adhesive-filling material performed in cases of both dental adhesives and for a certain loading condition. Important differences were identified among the adhesives, the fourth generation being superior to the fourth generation especially due to the separate steps in which the tooth surface was prepared for adhesion.

The Effect of Salivary Contamination on the Shear Bond Strength of Seventh- and Eighth-generation Adhesive Systems

Aim

To compare the effect of salivary contamination on the shear bond strength (SBS) of seventh- and eighth-generation adhesives.

Materials and methods

Specimens were randomly divided into group I and group II, subdivided into three subgroups of 11 samples. Subgroup IA-seventh-generation uncontaminated (control); adhesive; air-dried; light cured. Subgroup IB-seventh-generation adhesive; saliva application, air-dried; light cured. Subgroup IC-seventh-generation adhesive; saliva application, air-dried, reapplication of adhesive, air-dried, light cured. Subgroup IIA- eighth-generation uncontaminated (control); adhesive, air-dried; light cured. Subgroup IIB- eighth-generation adhesive; saliva application, air-dried; light cured. Subgroup IIC-eighth-generation adhesive, saliva application, air-dried, reapplication of adhesive, air-dried; light cured. Following bonding procedure, composite resin restoration was done and subjected to SBS analysis.

Results

Mean SBS of eighth-generation adhesive was higher compared to seventh with and without saliva contamination. Reduction of SBS in seventh- and eighth-generation after saliva contamination was regained by reapplication of adhesive, which was less compared to the control [statistically significant (p < 0.05) for seventh and statistically not significant for eighth-generations].

Conclusion

The eighth-generation adhesives show better SBS with and without saliva contamination and reapplication of eighth-generation adhesives significantly improved the SBS close to the control.

Clinical significance

Single-step self-etch adhesives are the adhesives which are currently used for bonding composite restorations to dentin. The adhesive bond strength can be adversely affected by moisture contamination, especially by saliva, which can lead to failure of restoration. So, it is imperative to study a material which gives better bond strength and is less affected by salivary contamination and effect of decontamination to regain the bond strength. The study concluded that eighth-generation adhesives showed higher mean SBS with and without saliva contamination and reapplication of eighth-generation adhesives significantly improved the bond strength close to the control group.

How to cite this article

Mohan MC, Geetha P, Soman D, et al. The Effect of Salivary Contamination on the Shear Bond Strength of Seventh- and Eighth-generation Adhesive Systems. Int J Clin Pediatr Dent 2023;16(S-1):S63-S66.

Fracture Resistance of Endodontically Treated Teeth Restored With Short Fiber Reinforced Composite and a Low Viscosity Bulk Fill Composite in Class II Mesial-Occlusal-Distal Access Cavities: An Ex-vivo Study

Background Teeth undergoing endodontic therapy are prone to structural weakening and increased risk of fractures. The absence of marginal ridges and pericervical dentin further compromises the fracture resistance. The choice of the post-endodontic coronal seal is crucial for the effectiveness of endodontic therapy. Aim and Objectives This study compared the fracture resistance and fracture modes of endodontically treated teeth (ETT) with mesial-occlusal-distal (MOD) cavities restored with two different posterior composite resins: e-glass fiber reinforced composite (FRC) (everX Posterior) and flowable bulk fill composite (SDR Flow+).  Materials and Methods Sixty human maxillary first bicuspids were divided into four groups: Group PC- positive control (intact teeth), Group NC- negative control (unrestored endodontically treated teeth), Group EXP- samples restored with everX Posterior and nano-hybrid composite, and Group SDR- samples restored with SDR Flow+ and nano-hybrid composite. The NC, EXP, and Smart Dentin Replacement (SDR) samples underwent endodontic procedures and MOD cavity preparation. The samples from EXP and SDR groups were restored with composite resins as post-endodontic coronal seals. The fracture resistance was evaluated using a Universal Testing Machine (UTM), and fracture modes were examined under a dental operating microscope (DOM) at 6x magnification. Statistical tests were performed using One-way ANOVA and Tukeys' post hoc tests. Results  The mean fracture resistance of the experimental groups was as follows: PC- 880.1 ± 209.3 N; NC- 238.1 ± 15.4 N; EXP- 766.1 ± 50.2 N; SDR- 540.8 ± 49.4 N. The highest fracture resistance values were observed in the PC group, whereas the NC group showed the least. The EXP group exhibited significantly higher fracture resistance than the SDR group. Adhesive failure was observed in most samples in the EXP group, whereas samples in the SDR group showed more cohesive failures. Favorable fractures were more prevalent in samples restored with EverX posterior. Conclusion The study findings suggest that everX Posterior can enhance the fracture resistance of structurally compromised ETT. Samples restored with everX Posterior showed a favorable mode of fracture, which can be restored. Applying FRCs can contribute to the longevity and success of endodontic treatment by reinforcing the weakened tooth structure and preventing fractures.

Comparative evaluation of the effect of two natural collagen cross-linkers on microtensile bond strength of self-etch adhesive system to dentin after contamination with blood and hemostatic agent: An in vitro study

Background

Cavity preparation often causes gingival bleeding which can be controlled by hemostatic agents (HAs). These along with blood act as contaminants and hamper the bonding mechanism. Collagen cross-linkers (CCLs) are agents known to increase the bond strength (BS) to dentin. Hence, the purpose of this in vitro study was to determine the effect of two different CCLs, proanthocyanidin (grape seed extract [GSE]) and hesperidin on the microtensile BS (μTBS) of a self-etch adhesive (SEA) system to dentin which was contaminated with blood and a HA.

Materials and Methods

Thirty-six extracted human molars were collected, and their occlusal surfaces were sectioned to expose the dentin. The teeth were randomly divided into four groups: Group I - Control, Group II - Contamination with blood and HA, Group III - Application of GSE after contamination, and Group IV - Application of hesperidin extract after contamination. The SEA was applied, followed by the use of a nanocomposite. Dentin-composite rods were obtained from each group, and μTBS testing was done. The fracture pattern was visually classified as an adhesive failure at the interface, cohesive failure in composite, or dentin. The scanning electron microscope (SEM) analysis was done for two samples from each group. Statistical analysis was done using the Student's unpaired "t" and ANOVA test.

Results

Group II showed a statistically significant reduction in μTBS in comparison to Group I. This was overcome in Groups III and IV. Hesperidin showed marginally better results than GSE.

Conclusions

The use of GSE and hesperidin increases the μTBS of composite resin to dentin postcontamination with blood and ViscoStat Clear with Single Bond Universal Adhesive.

Fracture Strength of Endocrowns Fabricated From Three Different Computer-Aided Design/Computer-Aided Manufacturing Ceramic Materials: An In-Vitro Study

INTRODUCTION

Endocrown restorations have increased in popularity in recent years due to the advancement of both adhesive and restorative materials. The clinical success of endocrowns depends on several factors, including preparation design, material selection, fracture resistance, and marginal adaptation. The aim of this in vitro study was to compare the fracture strength of endocrown restorations fabricated from three different computer-aided design (CAD)/computer-aided manufacturing (CAM) materials.

METHODS

Thirty extracted mandibular first molars were selected. The teeth underwent conventional root canal treatment before being prepared for endocrown restoration. The teeth were allocated to three groups (n=10), corresponding to each of the three ceramic materials used to fabricate the endocrowns they would receive. The ceramic materials used were zirconia-reinforced lithium silicate glass-ceramic (VITA Suprinity, VITA Zahnfabrik, Bad Säckingen, Germany), polymer-infiltrated hybrid ceramic (VITA Enamic, VITA Zahnfabrik, Bad Säckingen, Germany), and lithium disilicate glass-ceramic (IPS e.max CAD, Ivoclar Vivadent, Schaan, Liechtenstein). The specimens were scanned, and the digital impressions were transferred into design software to construct the endocrowns. The endocrowns were then milled and cemented. A universal testing machine (5969L3504, Instron, USA) was used for the fracture strength test at a crosshead speed of 1 mm/min until catastrophic failure occurred. Statistical analysis was performed using IBM Corp. Released 2015. IBM SPSS Statistics for Windows, Version 23.0. Armonk, NY: IBM Corp.

RESULTS

The one-way analysis of the variance test indicated a significant difference in the fracture strength between the different ceramic groups tested (P=0.037). The Tukey posthoc test showed that the IPS e.max CAD group had marginally higher fracture strength values than the VITA Enamic group (P=055). No significant differences in fracture strength values were found between the VITA Enamic and VITA Suprinity groups or between the VITA Suprinity and IPS e.max CAD groups (P>0.05).

CONCLUSION

The reported fracture strength values for all the tested materials were higher than the strength required to resist masticatory forces. Therefore, endocrowns fabricated using VITA Enamic, IPS e.max CAD, and VITA Suprinity CAD/CAM materials present restorations with a clinically acceptable fracture strength.

A Comparative Study of the Marginal Fit of Endocrowns Fabricated From Three Different Computer-Aided Design/Computer-Aided Manufacturing (CAD/CAM) Ceramic Materials: An In Vitro Study

INTRODUCTION

The marginal seal and adaptation are important factors for successful restoration. An inadequate marginal seal can lead to bacterial microleakage, plaque accumulation, and eventually treatment failure This in vitro study aimed to compare the marginal gap of endocrowns fabricated from three different computer-aided design/computer-aided manufacturing (CAD/CAM) ceramic materials.

METHODS

Thirty extracted mandibular molars were selected for the study. Endocrown preparations were completed after root canal treatment. Teeth were divided into three groups to receive endocrowns fabricated of lithium disilicate ceramic (IPS-e.max CAD, Ivoclar Vivadent AG, Schaan, Liechtenstein), zirconia-reinforced lithium silicate ceramic (VITA Suprinity®, VITA Zahnfabrik, Bad Säckingen, Germany), and polymer-infiltrated ceramic (VITA Enamic®, VITA Zahnfabrik). The digital impressions were transferred to the design software to construct the endocrowns. The endocrowns were milled and cemented. The marginal fit was examined using a digital camera stereomicroscope at a magnification of 80X. Images were transferred to Image-J software (National Institutes of Health, Bethesda, Maryland, United States) to measure the marginal gap.

RESULTS

One-way ANOVA showed a significant difference in the marginal gap between the different ceramic groups (P=0.006). Tukey's Honest Significant Difference (HSD) post-hoc test showed that VITA Suprinity had significantly higher gap width values than VITA Enamic (P=0.005). No significant differences in gap width values were found between VITA Enamic and IPS e.max CAD or between VITA Suprinity and IPS e.max CAD (P>0.05).

CONCLUSION

The marginal gap of endocrown restorations varies with different CAD/CAM materials (zirconia-reinforced lithium silicate glass-ceramic, polymer-infiltrated hybrid ceramic, and lithium disilicate glass-ceramic), but are all within clinically acceptable marginal gap width.

The Use of Warm Air for Solvent Evaporation in Adhesive Dentistry: A Meta-Analysis of In Vitro Studies

Any excess solvent from dental adhesive systems must be eliminated prior to material photopolymerization. For this purpose, numerous approaches have been proposed, including the use of a warm air stream. This study aimed to investigate the effect of different temperatures of warm air blowing used for solvent evaporation on the bond strength of resin-based materials to dental and nondental substrates. Two different reviewers screened the literature in diverse electronic databases. In vitro studies recording the effect of warm air blowing to evaporate solvents of adhesive systems on the bond strength of resin-based materials to direct and indirect substrates were included. A total of 6626 articles were retrieved from all databases. From this, 28 articles were included in the qualitative analysis, and 27 remained for the quantitative analysis. The results of the meta-analysis for etch-and-rinse adhesives revealed that the use of warm air for solvent evaporation was statistically significantly higher (p = 0.005). For self-etch adhesives and silane-based materials, this effect was observed too (p < 0.001). The use of a warm air stream for solvent evaporation enhanced the bonding performance of alcohol-/water-based adhesive systems for dentin. This effect seems to be similar when a silane coupling agent is submitted to a heat treatment before the cementation of a glass-based ceramic.

A self-etch bonding system with potential to eliminate selective etching and resist proteolytic degradation

OBJECTIVES

Bonded restorations using self-etch (SE) systems exhibit a limited lifespan due to their susceptibility to hydrolytic, enzymatic or fatigue degradation and poor performance on enamel. This study was conducted to develop and assess the performance of a two-step SE system using a functional monomer bis[2-(methacryloyloxy)ethyl]phosphate (BMEP) and demonstrate a strategy to enhance stability of bonded resin composite restorations to both enamel and dentine.

METHODS

A two-step SE system was formulated with a primer containing BMEP, with an adhesive with or without BMEP, and compared to a commercial 10-MDP-containing system, Clearfil^TM SE Bond 2 (CFSE). The systems were evaluated on enamel for surface roughness and microshear bond strength (µSBS) and on dentine for microtensile bond strength (µTBS), nanoleakage, MMP inhibition and cyclic flexural fatigue.

RESULTS

Whilst all bonding systems resulted in statistically similar µSBS, BMEP-based primers yielded greater enamel surface roughness than the CFSE primer. The BMEP-free adhesives resulted in statistically similar or higher µTBS and lower nanoleakage compared to CFSE. In situ zymography revealed minimal to no MMP activity within the hybrid layer of BMEP-based systems. The BMEP-free adhesive exhibited flexural strength and fatigue resistance statistically similar to CFSE.

CONCLUSIONS

Incorporation of BMEP in the primer led to satisfactory bond strengths with both enamel and dentine, potentially eliminating the need for selective enamel etching. Combined with an adhesive formulation that is solvent-free and hydrophobic, and confining the acidic functional monomer in the primer resulted in minimal interfacial leakage, and resistance to proteolytic degradation and the cyclic nature of chewing.

CLINICAL SIGNIFICANCE

The SE bonding system containing BMEP combines the potent etching of phosphoric acid with the therapeutic function of the phosphate-based monomer in creating a homogenous hybrid layer with protection against endogenous proteolytic enzymes. This strategy may overcome current challenges that arise during selective enamel etching.

Microtensile Bond Strength of Different Bonding Agents to Superficial and Deep Dentin in Etch-and-Rinse and Self-Etch Modes

Objectives: This study aimed to assess the microtensile bond strength (µTBS) of etch-and-rinse (E&R), self-etch (SE), and universal adhesives to superficial and deep dentin. Materials and Methods: In this in vitro study, 40 sound third molars were randomly divided into two main groups of superficial and deep dentin. Based on our classification, superficial dentin was right beneath the deepest occlusal groove, and deep dentin was 2mm beneath the deepest occlusal groove. Each group was divided into 4 subgroups (n=20) for application of Adper Single Bond 2 (ASB), Clearfil SE Bond (CSE), and Scotchbond Universal (SBU) in E&R and SE modes along with Charisma Smart composite resin on dentin. The specimens were incubated in distilled water at 37°C for 24 hours and their µTBS was then measured. The mode of failure was determined under a stereomicroscope at ×40 magnification. Data were analyzed by one-way ANOVA (alpha=0.05). Results: The highest µTBS belonged to the superficial dentin/SBU/E&R group. The µTBS was significantly higher in superficial dentin than deep dentin for all adhesives (P=0.005). There was no significant difference in mode of failure among the groups. Conclusion: Based on the results obtained in the present study, type of bonding agent and application mode affected µTBS. In use of universal adhesive, E&R mode can improve µTBS.

Degradation and Failure Phenomena at the Dentin Bonding Interface

Damage in the bonding interface is a significant factor that leads to premature failure of dental bonded restorations. The imperfectly bonded dentin-adhesive interface is susceptible to hydrolytic degradation and bacterial and enzyme attack, severely jeopardizing restorations' longevity. Developing caries around previously made restorations, also called "recurrent or secondary caries," is a significant health problem. The replacement of restorations is the most prevailing treatment in dental clinics, leading to the so-called "tooth death spiral". In other words, every time a restoration is replaced, more tooth tissue is removed, increasing the size of the restorations until the tooth is eventually lost. This process leads to high financial costs and detriment to patients' quality of life. Since the complexity of the oral cavity makes prevention a challenging task, novel strategies in Dental Materials and Operative fields are required. This article briefly overviews the physiological dentin substrate, features of dentin bonding, challenges and clinical relevance. We discussed the anatomy of the dental bonding interface, aspects of the degradation at the resin-dentin interface, extrinsic and intrinsic factors affecting dental bonding longevity, perspectives on resin and collagen degradation and how these subjects are connected. In this narrative review, we also outlined the recent progress in overcoming dental bonding challenges through bioinspiration, nanotechnology and advanced techniques to reduce degradation and improve dental bonding longevity.

Long-term water sorption/solubility of two dental bonding agents containing a colloidal dispersion of titanium dioxide

The aim was to analyze the influence of the incorporation of 4% by mass of colloidal dispersion of titanium dioxide (TiO2) nanoparticles on the long-term water sorption and solubility of two commercial universal bonding agents. In vitro studies. A colloidal dispersion of TiO2 nanoparticles was formulated and blended into two commercial dental bonding agents, i.e., Ambar Universal (FGM, Brasil) and G-Premio Bond Universal (GC, America) at 4% by mass. Forty bonding agent discs were fabricated and segregated into four bonding agent groups of 10 discs each, i.e., GA: Ambar Universal (control), GB: Ambar Universal (4% TiO2 incorporated), GC: G-Premio Bond universal (control), and GD: G-Premio Bond (4% TiO2 incorporated). The bonding agent discs were developed by dispensing the bonding agents into a silicone cast of 5 mm diameter and 1 mm depth. After bonding agent discs were desiccated, the cured discs were weighed and kept in distilled water to be evaluated for water sorption and solubility over 1 year storage period. Statistical analysis was performed by independent variable t-test performed using the IBM SPSS software (Chicago, IL: SPSS Inc). The incorporated bonding agent groups (GA and GB) showed significantly lower (P < 0.05) water sorption and solubility following 1 year of water storage in comparison to the control bonding agents. Both GC and GD demonstrated remarkably lower water sorption and solubility than GA and GB. Incorporation of the colloidal dispersion of TiO2 nanoparticles at 4% by mass into the universal bonding agents has significantly reduced their water sorption and solubility contrast to their control groups.

Evaluation of the shear bond strength and adhesive remnant index of color change, fluorescent, and conventional orthodontic adhesives: An in vitro study

AIMS

To investigate the in vitro performance of colour change orthodontic adhesive (CCOA) or fluorescent orthodontic adhesive (FOA), conventional orthodontic adhesives (COA), and the mixed CCOA and FOA utilizing the shear bond strength (SBS) and adhesive remnant index (ARI).

MATERIAL AND METHODS

Ninety extracted first premolars were used in the study. Four manufacturers of orthodontic adhesive were used, including Transbond™ XT (TBXT) and Transbond™ plus (TBP) (3M™ Unitek™, CA, United States), Ormco Enlight™ (OE) and Greengloo™ (GG) (Ormco™, CA, United States), Light Bond Medium™ (LBM), and GoTo™ (GT) (Reliance orthodontic products®, IL, United States), and BracePaste® Adhesive (BPA) and BracePaste® Colour Change (BPCC) (American orthodontics®, WI, United States). The mixed orthodontic adhesive of Transbond™ plus and GoTo™ (TBPGT) was prepared to evaluate the combined effect of colour change and fluorescent orthodontic adhesives. Peak SBS was recorded using a universal testing machine. ARI was measured using a stereomicroscope under 10x magnification. Descriptive statistical analysis and comparative tests were used to evaluate the results.

RESULTS

All CCOA and FOA had higher mean SBS than COA. The highest value of SBS was obtained in BPCC (23.56MPa), and the lowest value in TBPGT (11.41Mpa). One-way ANOVA multiple comparisons and Duncan's multiple range test showed that TBXT and TBPGT significantly differed in SBS with GT, GG, TBP, and BPCC, respectively (P=0.016). Kruskal-Wallis multiple comparisons test showed no significant differences in ARI among the tested adhesives (P=0.089).

CONCLUSIONS

Colour Change Orthodontic Adhesive (CCOA) and Fluorescent Orthodontic Adhesive (FOA) showed a higher SBS than conventional orthodontic adhesives. Greengloo^TM had the lowest ARI among the groups tested. All adhesives tested can be safely used in orthodontic practice, and both CCOA and FOA showed better performance than COA. The Transbond^TM plus and GoTo^TM (TBPGT) mixed adhesives showed the lowest performance in terms of SBS and ARI.