Effects of a Saddle Shaped Annulus on Mitral Valve Function and Chordal Force Distribution: An In Vitro Study

An axis-specific mitral annuloplasty ring eliminates mitral regurgitation allowing mitral annular motion in an ovine model

INTRODUCTION

Current mitral annuloplasty rings fail to restrict the anteroposterior distance while allowing dynamic mitral annular changes. We designed and manufactured a mitral annuloplasty ring that demonstrated axis-specific, selective flexibility to meet this clinical need. The objectives were to evaluate ex vivo biomechanics of this ring and to validate the annular dynamics and safety after ring implantation in vivo.

METHODS

Healthy human mitral annuli (n = 3) were tracked, and motions were isolated. Using the imaging data, we designed and manufactured our axis-specific mitral annuloplasty ring. An ex vivo annular dilation model was used to compare hemodynamics and chordal forces after repair using the axis-specific, rigid, and flexible rings in five porcine mitral valves. In vivo, axis-specific (n = 6), rigid (n = 6), or flexible rings (n = 6) were implanted into male Dorset sheep for annular motion analyses. Five additional animals receiving axis-specific rings survived for up to 6 months.

RESULTS

Here we show the axis-specific, rigid, and flexible rings reduced regurgitation fraction to 4.7 ± 2.7%, 2.4 ± 3.2%, and 17.8 ± 10.0%, respectively. The axis-specific ring demonstrated lower average forces compared to the rigid ring (p = 0.046). Five animals receiving axis-specific rings survived for up to 6 months, with mitral annular motion preserved in vivo. Mature neoendocardial tissue coverage over the device was found to be complete with full endothelialization in all animals.

CONCLUSIONS

The axis-specific mitral annuloplasty ring we designed demonstrates excellent capability to repair mitral regurgitation while facilitating dynamic mitral annular motion. This ring has tremendous potential for clinical translatability, representing a promising surgical solution for mitral regurgitation.

Gene expression of Postn and FGF7 in canine chordae tendineae and their effects on flexor tenocyte biology

Chordae tendineae, referred to as heart tendinous cords, act as tendons connecting the papillary muscles to the valves in the heart. Their role is analogous to tendons in the musculoskeletal system. Despite being exposed to millions of cyclic tensile stretches over a human's lifetime, chordae tendineae rarely suffer from overuse injuries. On the other hand, musculoskeletal tendinopathy is very common and remains challenging in clinical treatment. The objective of this study was to investigate the mechanism behind the remarkable durability and resistance to overuse injuries of chordae tendineae, as well as to explore their effects on flexor tenocyte biology. The messenger RNA expression profiles of chordae tendineae were analyzed using RNA sequencing and verified by quantitative reverse transcription polymerase chain reaction  and immunohistochemistry. Interestingly, we found that periostin (Postn) and fibroblast growth factor 7 (FGF7) were expressed at significantly higher levels in chordae tendineae, compared to flexor tendons. We further treated flexor tenocytes in vitro with periostin and FGF7 to examine their effects on the proliferation, migration, apoptosis, and tendon-related gene expression of flexor tenocytes. The results displayed enhanced cell proliferation ability at an early stage and an antiapoptotic effect on tenocytes, while treated with periostin and/or FGF7 proteins. Furthermore, there was a trend of promoted tenocyte migration capability. These findings indicated that Postn and FGF7 may represent novel cytokines to target flexor tendon healing. Clinical significance: The preliminary discovery leads to a novel idea for treating tendinopathy in the musculoskeletal system using specific molecules identified from chordae tendineae.

A geometry-based finite element tool for evaluating mitral valve biomechanics

Mitral valve function depends on its complex geometry and tissue health, with alterations in shape and tissue response affecting the long-term restorarion of function. Previous computational frameworks for biomechanical assessment are mostly based on patient-specific geometries; however, these are not flexible enough to yield a variety of models and assess mitral closure for individually tuned morphological parameters or material property representations. This study details the finite element approach implemented in our previously developed toolbox to assess mitral valve biomechanics and showcases its flexibility through the generation and biomechanical evaluation of different models. A healthy valve geometry was generated and its computational predictions for biomechanics validated against data in the literature. Moreover, two mitral valve models including geometric alterations associated with disease were generated and analysed. The healthy mitral valve model yielded biomechanical predictions in terms of valve closure dynamics, leaflet stresses and papillary muscle and chordae forces comparable to previous computational and experimental studies. Mitral valve function was compromised in geometries representing disease, expressed by the presence of regurgitating areas, elevated stress on the leaflets and unbalanced subvalvular apparatus forces. This showcases the flexibility of the toolbox concerning the generation of a range of mitral valve models with varying geometric definitions and material properties and the evaluation of their biomechanics.

Utilization of Engineering Advances for Detailed Biomechanical Characterization of the Mitral-Ventricular Relationship to Optimize Repair Strategies: A Comprehensive Review

The geometrical details and biomechanical relationships of the mitral valve-left ventricular apparatus are very complex and have posed as an area of research interest for decades. These characteristics play a major role in identifying and perfecting the optimal approaches to treat diseases of this system when the restoration of biomechanical and mechano-biological conditions becomes the main target. Over the years, engineering approaches have helped to revolutionize the field in this regard. Furthermore, advanced modelling modalities have contributed greatly to the development of novel devices and less invasive strategies. This article provides an overview and narrative of the evolution of mitral valve therapy with special focus on two diseases frequently encountered by cardiac surgeons and interventional cardiologists: ischemic and degenerative mitral regurgitation.

Fluid structure computational model of simulating mitral valve motion in a contracting left ventricle

BACKGROUND

Fluid structure interaction simulations h hold promise in studying normal and abnormal cardiac function, including the effect of fluid dynamics on mitral valve (MV) leaflet motion. The goal of this study was to develop a 3D fluid structure interaction computational model to simulate bileaflet MV when interacting with blood motion in left ventricle (LV).

METHODS

The model consists of ideal geometric-shaped MV leaflets and the LV, with MV dimensions based on human anatomical measurements. An experimentally-based hyperelastic isotropic material was used to model the mechanical behaviour of the MV leaflets, with chordae tendineae and papillary muscle tips also incorporated. LV myocardial tissue was prescribed using a transverse isotropic hyperelastic formulation. Incompressible Navier-Stokes fluid formulations were used to govern the blood motion, and the Arbitrary Lagrangian Eulerian (ALE) method was employed to determine the mesh deformation of the fluid and solid domains due to trans-valvular pressure on MV boundaries and the resulting leaflet movement.

RESULTS

The LV-MV generic model was able to reproduce physiological MV leaflet opening and closing profiles resulting from the time-varying atrial and ventricular pressures, as well as simulating normal and prolapsed MV states. Additionally, the model was able to simulate blood flow patterns after insertion of a prosthetic MV with and without left ventricular outflow tract flow obstruction. In the MV-LV normal model, the regurgitant blood flow fraction was 10.1 %, with no abnormality in cardiac function according to the mitral regurgitation severity grades reported by the American Society of Echocardiography.

CONCLUSION

Our simulation approach provides insights into intraventricular fluid dynamics in a contracting LV with normal and prolapsed MV function, as well as aiding in the understanding of possible complications after transcatheter MV implantation prior to clinical trials.

Effects of MitraClip Therapy on Mitral Flow Patterns and Vortex Formation: An In Vitro Study

MitraClip transcatheter edge-to-edge repair is used to treat mitral regurgitation (MR). While MR is reduced, diastolic left ventricular flows are altered. An in vitro left heart simulator was used to assess a porcine mitral valve in the native, MR, and MR plus MitraClip cases. Velocity, vorticity, and Reynolds shear stress (RSS) were quantified by particle image velocimetry. Peak velocity increased from 1.20 m/s for native to 1.30 m/s with MR. With MitraClip, two divergent jets of 1.18 and 0.61 m/s emerged. Higher vorticity was observed with MR than native and lessened with MitraClip. MitraClip resulted in shear layer formation and downstream vortex formation. Native RSS decreased from 33 Pa in acceleration to 29 Pa at peak flow, then increased to 31 Pa with deceleration. MR RSS increased from 27 Pa in acceleration to 40 Pa at peak flow to 59 Pa during deceleration. MitraClip RSS increased from 79 Pa in acceleration to 162 Pa during peak flow, then decreased to 45 Pa during deceleration. After MitraClip, two divergent jets of reduced velocity emerged, accompanied by shear layers and recirculation. Chaotic flow developed, resulting in elevated RSS magnitude and coverage. Findings help understand consequences of MitraClip on left ventricular flow dynamics.

Three dimensional modeling of atrioventricular valves provides predictive guides for optimal choice of prosthesis

Inaccuracies in intraoperative and preoperative measurements and estimations may lead to adverse outcomes such as patient-prosthesis mismatch. We aim to measure the relation between different dimensions of the atrioventricular valve complex in explanted porcine heart models. After a detailed physical morphology study, a cast of the explanted heart models was made using silicon-based materials. Digital models were obtained from three-dimensional scanning of the casts, showing the measured annulopapillary distance was 2.50 ± 0.18 cm, and 2.75 ± 0.36 cm for anterior and posterior papillary muscles of left ventricle, respectively. There was a significant linear association between the mitral annular circumference to anterior–posterior distance (p = 0.003, 95% CI 0.78–3.06), mitral annular circumference to interpapillary distance (p = 0.009, 95% CI 0.38–2.20), anterior–posterior distance to interpapillary distance (p = 0.02, 95% CI 0.10–0.78). Anterior–posterior distance appeared to be the most important predictor of mitral annular circumference compared to other measured distances. The mean length of the perpendicular distance of the tricuspid annulus, a, was 2.65 ± 0.54 cm; b was 1.77 ± 0.60 cm, and c was 3.06 ± 0.55 cm. Distance c was the most significant predictor for tricuspid annular circumference (p = 0.006, 95% CI 0.28–2.84). The anterior–posterior distance measured by three-dimensional scanning can safely be used to predict the annular circumference of the mitral valve. For the tricuspid valve, the strongest predictor for the circumference is the c-distance. Other measurements made from the positively correlated parameters may be extrapolated to their respective correlated parameters. They can aid surgeons in selecting the optimal prosthesis for the patients and improve procedural planning.

In Vitro Mitral Valve Model with Unrestricted Ventricular Access: Using Vacuum to Close the Valve and Enable Static Trans-Mitral Pressure

Current in vitro models of the left heart establish the pressure difference required to close the mitral valve by sealing and pressurizing the ventricular side of the valve, limiting important access to the subvalvular apparatus. This paper describes and evaluates a system that establishes physiological pressure differences across the valve using vacuum on the atrial side. The subvalvular apparatus is open to atmospheric pressure and accessible by tools and sensors, establishing a novel technique for experimentation on atrioventricular valves. Porcine mitral valves were excised and closed by vacuum within the atrial chamber. Images were used to document and analyze closure of the leaflets. Papillary muscle force and regurgitant flow rate were measured to be 4.07 N at 120 mmHg and approximately 12.1 ml/s respectively, both of which are within clinically relevant ranges. The relative ease of these measurements demonstrates the usefulness of improved ventricular access at peak pressure/force closure.

A new device to treat mitral valve regurgitation: a proof of concept in bench test study

Mitral valve repair is typically performed by implanting a ring-like device at the valve annulus to reshape the annulus and to improve leaflet coaptation. In most cases, some additional procedures are needed, including leaflet resection and artificial chordae implantation. However, artificial chordae implantation could be technically challenging and postoperative left ventricular remodeling could increase the risk of recurrent mitral regurgitation. We propose an innovative annular device made of chromo-cobalt, finalized not only to reshape the annulus but also to enable anchoring of leaflets to a fixed intraventricular structure. Durability evaluation of the device was tested by applying eight radial force vectors equally spaced along the ring and related fatigue analysis. To evaluate the efficacy of the mitral valvuloplasty using the tested ring, the device was implanted in five adult swine hearts. Functional analysis of the ring was performed by measuring left ventricular pressure and fluid volume loss, following implantation in normal and dysfunctional mitral valve leaflets. Both fatigue and functional analysis showed satisfactory and promising results in terms of durability and efficacy of mitral valve repair. Because of its favorable durability and functional characteristics this device appears promising and provides good results in terms of valve competence, thus avoiding both manipulations of papillary muscles and interference in left ventricular hemodynamics. However, an in vivo test is mandatory to fully understand the impact of the device on subvalvular apparatus.

Mechanical testing of glutaraldehyde cross-linked mitral valves. Part two: Elastic and viscoelastic properties of chordae tendineae

The aim of this study was to assess whether the mechanical properties of mitral valve chordae tendineae are sensitive to being cross-linked under load. A total 64 chordae were extracted from eight porcine hearts. Two chordae (posterior basal) from each heart were subjected to uniaxial ramp testing and six chordae (two strut, two anterior basal and two posterior basal) were subjected to dynamic mechanical analysis over frequencies between 0.5 and 10 Hz. Chordae were either cross-linked in tension or cross-linked in the absence of loading. Chordae cross-linked under load transitioned from high to low extension at a lower strain than cross-linked unloaded chordae (0.07 cf. 0.22), with greater pre-transitional (30.8 MPa cf. 5.78 MPa) and post-transitional (139 MPa cf. 74.1 MPa) moduli. The mean storage modulus of anterior strut chordae ranged from 48 to 54 MPa for cross-linked unloaded chordae, as compared to 53-61 MPa cross-linked loaded chordae. The mean loss modulus of anterior strut chordae ranged from 2.3 to 2.9 MPa for cross-linked unloaded chordae, as compared to 3.8-4.8 MPa cross-linked loaded chordae. The elastic and viscoelastic properties of chordae following glutaraldehyde cross-linking are dependent on the inclusion/exclusion of loading during the cross-linking process; with loading increasing the magnitude of the material properties measured.

Quantification of load-dependent changes in the collagen fiber architecture for the strut chordae tendineae-leaflet insertion of porcine atrioventricular heart valves

Atrioventricular heart valves (AHVs) regulate the unidirectional flow of blood through the heart by opening and closing of the leaflets, which are supported in their functions by the chordae tendineae (CT). The leaflets and CT are primarily composed of collagen fibers that act as the load-bearing component of the tissue microstructures. At the CT-leaflet insertion, the collagen fiber architecture is complex, and has been of increasing focus in the previous literature. However, these previous studies have not been able to quantify the load-dependent changes in the tissue's collagen fiber orientations and alignments. In the present study, we address this gap in knowledge by quantifying the changes in the collagen fiber architecture of the mitral and tricuspid valve's strut CT-leaflet insertions in response to the applied loads by using a unique approach, which combines polarized spatial frequency domain imaging with uniaxial mechanical testing. Additionally, we characterized these microstructural changes across the same specimen without the need for tissue fixatives. We observed increases in the collagen fiber alignments in the CT-leaflet insertion with increased loading, as described through the degree of optical anisotropy. Furthermore, we used a leaflet-CT-papillary muscle entity method during uniaxial testing to quantify the chordae tendineae mechanics, including the derivation of the Ogden-type constitutive modeling parameters. The results from this study provide a valuable insight into the load-dependent behaviors of the strut CT-leaflet insertion, offering a research avenue to better understand the relationship between tissue mechanics and the microstructure, which will contribute to a deeper understanding of AHV biomechanics.

Mitral Valve Posterior Leaflet Reconstruction Using Extracellular Matrix: In Vitro Evaluation

PURPOSE

To investigate the anatomical and functional effects of complete surgical reconstruction of the posterior mitral leaflet and associated chordae tendineae with a patch made of 2-ply small intestinal submucosal extracellular matrix in vitro.

METHODS

Seven explanted mitral valves with intact subvalvular apparatus from 80-kg pigs were evaluated in a left heart simulator and served as their own controls. After testing the native valve, the mitral posterior leaflet and associated chordae tendineae were excised and reconstructed by using the 2-ply small intestinal submucosa extracellular matrix patch. The characterization of the reconstruction was based on geometric data from digital images, papillary muscle force, annular tethering force and leaflet pressure force.

RESULTS

The reconstructed valves were fully functional without regurgitation, tearing or rupture during incrementally increased pressure from 0 to 120 mmHg. The leaflet areas were preserved after reconstruction, with a normal configuration of the coaptation line. However, the coaptation midpoint moved posteriorly after reconstruction (A2: 15.8 ± 1.4 vs. 18.9 ± 1.5 mm, p = 0.002, diff = 3.1 mm, 95% CI 1.3 to 4.8 mm). The anterior papillary muscle force increased significantly (3.9 vs. 4.6 N, p = 0.029, diff = 0.7 N, 95% CI 0.1 to 1.4 N at 120mmHg) after reconstruction. The posterior papillary muscle force, leaflet pressure force and annular pressure force did not change significantly.

CONCLUSIONS

In this in vitro model, mitral valve anatomy and function were comparable between the native mitral valve and our new surgical technique for complete reconstruction of the posterior mitral leaflet and associated chordae tendineae. These promising results warrant further in vivo evaluation.

Mechanics of Porcine Heart Valves' Strut Chordae Tendineae Investigated as a Leaflet-Chordae-Papillary Muscle Entity

Proper blood flow through the atrioventricular heart valves (AHVs) relies on the holistic function of the valve and subvalvular structures, and a failure of any component can lead to life-threatening heart disease. A comprehension of the mechanical characteristics of healthy valvular components is necessary for the refinement of heart valve computational models. In previous studies, the chordae tendineae have been mechanically characterized as individual structures, usually in a clamping-based approach, which may not accurately reflect the in vivo chordal interactions with the leaflet insertion and papillary muscles. In this study, we performed uniaxial mechanical testing of strut chordae tendineae of the AHVs under a unique tine-based leaflet-chordae-papillary muscle testing to observe the chordae mechanics while preserving the subvalvular component interactions. Results of this study provided insight to the disparity of chordae tissue stress-stretch responses between the mitral valve (MV) and the tricuspid valve (TV) under their respective emulated physiological loading. Specifically, strut chordae tendineae of the MV anterior leaflet had peak stretches of 1.09-1.16, while peak stretches of 1.08-1.11 were found for the TV anterior leaflet strut chordae. Constitutive parameters were also derived for the chordae tissue specimens using an Ogden model, which is useful for AHV computational model refinement. Results of this study are beneficial to the eventual improvement of treatment methods for valvular disease.

Dynamic Left Atrioventricular Phantom Test Bed Emulating Mitral Valve Motion

Novel catheter-based medical procedures targeting heart valve structures are currently under development. These techniques entail installing a prosthetic implant on valves inside a beating heart. The development of these approaches requires a simple and effective validation test bed. Current early process testing methods rely on both static and dynamically pressurized excised porcine hearts. The variability between excised-tissue mechanical properties poses problems of reproducibility. In addition, these test beds do not emulate annulus motion, which affects the implant installation. A reproducible phantom of the left atrioventricular chambers was developed. The system consists of a hydraulic constant flow arrangement and a polyvinyl alcohol phantom heart with material properties that mimic passive myocardium mechanical properties and annulus motion. The system was then used to emulate blood flow through an actual heart. The building process starts by obtaining an accurate computer-aided design (CAD) model of a human heart, from which, a mold is produced using a novel rapid-freezing prototyping method and computer numerical control machining. The phantom is then cast-out of polyvinyl alcohol (PVA), a hydrogel, whose mechanical properties are set by subjecting the phantom to freeze and thaw cycles. Subsequently, blood flow is emulated at a constant volumetric rate at the atrial pressure observed in a healthy adult human heart at rest. The annulus motion is implemented by suturing the outside of the phantom to a one-degree-of-freedom cam-follower mechanism reproducing valve motion. Such test beds could play a significant role in future development of medical devices.

Anti-inflammatory activity of emu oil-based nanofibrous scaffold through downregulation of IL-1, IL-6, and TNF-α pro-inflammatory cytokines

Background Inflammation is one of the most important responses of the body against infection or disease, and it protects tissues from injury; however, it causes redness, swelling, pain, fever and loss of function. The aim of this present study was to evaluate the anti-inflammatory activity of emu oil (Eu) formulated nanofibrous scaffold in HFFF2 fibroblast cells. Materials and methods Eu was formulated successfully in nanofibers through the electrospinning method. Besides, the morphological and structural properties of Eu nanofibres were evaluated using Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The MTT assay (3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyl tetrazolium bromide) was performed to evaluate the HFFF2 fibroblast cells' viability. Also, real-time polymerase chain reaction (PCR) was used to evaluate the anti-inflammatory signaling pathway in treated HFFF2 cells with Eu nanofiber. Results Our study showed that the Eu nanofiber increased the viability of fibroblast HFFF2 cells (p < 0.05). Also, the expression of interleukin1 (IL1), IL6 and tumor necrosis factor- alpha (TNF-α) pro-inflammatory cytokines genes were significantly decreased in treated HFFF2 cells with Eu nanofiber (p < 0.05). Conclusions In conclusion, Eu nanofiber scaffold potentially can reduce the inflammation process through downregulation of IL-1, IL-6 and TNF-α cytokines.

Comparative pathology of human and canine myxomatous mitral valve degeneration: 5HT and TGF-β mechanisms

Myxomatous mitral valve degeneration (MMVD) is a leading cause of valve repair or replacement secondary to the production of mitral regurgitation, cardiac enlargement, systolic dysfunction, and heart failure. The pathophysiology of myxomatous mitral valve degeneration is complex and incompletely understood, but key features include activation and transformation of mitral valve (MV) valvular interstitial cells (VICs) into an active phenotype leading to remodeling of the extracellular matrix and compromise of the structural components of the mitral valve leaflets. Uncovering the mechanisms behind these events offers the potential for therapies to prevent, delay, or reverse myxomatous mitral valve degeneration. One such mechanism involves the neurotransmitter serotonin (5HT), which has been linked to development of valvulopathy in a variety of settings, including valvulopathy induced by serotonergic drugs, Serotonin-producing carcinoid tumors, and development of valvulopathy in laboratory animals exposed to high levels of serotonin. Similar to humans, the domestic dog also experiences naturally occurring myxomatous mitral valve degeneration, and in some breeds of dogs, the lifetime prevalence of myxomatous mitral valve degeneration reaches 100%. In dogs, myxomatous mitral valve degeneration has been associated with high serum serotonin, increased expression of serotonin-receptors, autocrine production of serotonin within the mitral valve leaflets, and downregulation of serotonin clearance mechanisms. One pathway closely associated with serotonin involves transforming growth factor beta (TGF-β) and the two pathways share a common ability to activate mitral valve valvular interstitial cells in both humans and dogs. Understanding the role of serotonin and transforming growth factor beta in myxomatous mitral valve degeneration gives rise to potential therapies, such as 5HT receptor (5HT-R) antagonists. The main purposes of this review are to highlight the commonalities between myxomatous mitral valve degeneration in humans and dogs, with specific regards to serotonin and transforming growth factor beta, and to champion the dog as a relevant and particularly valuable model of human disease that can accelerate development of novel therapies.

Development and Ex Vivo Validation of Novel Force-Sensing Neochordae for Measuring Chordae Tendineae Tension in the Mitral Valve Apparatus Using Optical Fibers With Embedded Bragg Gratings

Few technologies exist that can provide quantitative data on forces within the mitral valve apparatus. Marker-based strain measurements can be performed, but chordal geometry and restricted optical access are limitations. Foil-based strain sensors have been described and work well, but the sensor footprint limits the number of chordae that can be measured. We instead utilized fiber Bragg grating (FBG) sensors-optical strain gauges made of 125 μm diameter silica fibers-to overcome some limitations of previous methods of measuring chordae tendineae forces. Using FBG sensors, we created a force-sensing neochord (FSN) that mimics the natural shape and movement of native chordae. FBG sensors reflect a specific wavelength of light depending on the spatial period of gratings. When force is applied, the gratings move relative to one another, shifting the wavelength of reflected light. This shift is directly proportional to force applied. The FBG sensors were housed in a protective sheath fashioned from a 0.025 in. flat coil, and attached to the chordae using polytetrafluoroethylene suture. The function of the force-sensing neochordae was validated in a three-dimensional (3D)-printed left heart simulator, which demonstrated that FBG sensors provide highly sensitive force measurements of mitral valve chordae at a temporal resolution of 1000 Hz. As ventricular pressures increased, such as in hypertension, chordae forces also increased. Overall, FBG sensors are a viable, durable, and high-fidelity sensing technology that can be effectively used to measure mitral valve chordae forces and overcome some limitations of other such technologies.

Functional and Degenerative Mitral Regurgitation: One Ring Fits All?

BACKGROUND

Three-dimensional saddle-shaped annuloplasty rings have been shown to create a larger surface of leaflet coaptation in mitral valve repair (MVR) for functional mitral regurgitation (FMR) and degenerative mitral regurgitation (DMR) which may increase repair durability. For the first time, this study reports mid-term results after MVR for DMR and FMR using a rigid three-dimensional ring (Profile 3D, Medtronic).

METHODS

Between June 2009 and June 2012, 369 patients with DMR (n = 326) or FMR (n = 43) underwent MVR (mean age 62.3 ± 12.6 years). A total of 205 patients (55.6%) underwent isolated MVR and 164 patients (44.4%) a combined procedure. Follow-up examinations were performed in 94.9% (mean 4.9 ± 0.9 years). Echocardiographic assessment was complete in 93.2% (mean 4.3 ± 1.2 years).

RESULTS

The 30-day mortality was 1.5% (5/326) for DMR (1.5% for isolated and 1.6% for combined procedures) and 9.3% (4/43) for FMR (0% for isolated and 10.5% for combined procedures). Survival at 6 years was 92.1 ± 1.9% for DMR (92.9 ± 2.6% for isolated and 90.7 ± 2.7% for combined procedures) and 66.4 ± 7.9% for FMR (80.0 ± 17.9% for isolated and 63.7 ± 8.9% for combined procedures). Cumulative risk for mitral valve-related reoperation at 6 years was 0% for FMR and 7.1 ± 1.5% for DMR. At echocardiographic follow-up, one patient presented with mitral regurgitation (MR) more than moderate. The only predictor of recurrent MR after MVR for DMR was residual mild MR at discharge.

CONCLUSION

Repair of FMR with the three-dimensional Profile 3D annuloplasty ring shows excellent mid-term results with regard to recurrence of MR. In cases of DMR, the results are conforming to the current literature.

Structural analysis of the mitral valve in rheumatic and degenerative mitral valve diseases: implications for annuloplasty selection

BACKGROUND

Mitral valve (MV) repair has been recommended for MV diseases. Good repair requires a full understanding of the three-dimensional (3D) structure of the MV, however, currently little is known about the 3D structure of the rheumatic MV.

METHODS

A total of 82 cases underwent 3DTEE. Of these, 41 patients with rheumatic valvular disease (RVD) were studied intraoperatively (17 had severe mitral stenosis, 8 had severe mitral regurgitation, 16 had severe mitral stenosis coupled with regurgitation). There were 19 patients with degenerative MV disease (mitral valve prolapse [MVP] with severe regurgitation) and 22 cases with normal MV served as control subjects (CS).

RESULTS

Compared with CS, the anteroposterior diameter, anterolateral posteromedial, annulus circumference, and annulus area of both pathological groups, i.e., the RVD and MVP groups, were understandably greater. Though the sphericity index was greater in the RVD group vis-à-vis CS, the MVP group had nearly the same sphericity index as CS. The mitral annulus of patients with RVD tended to be round. Annular unsaddling, defined as annular height to commissural width ratio (an indicator of saddle degree) less than 15%, was significantly more prevalent in the group with degenerative MV disease. Automatic dynamic analysis revealed that the parameters of annular maximum displacement and annulus area fraction (two-dimensional) were considerably decreased in the RVD group.

CONCLUSIONS

Annular unsaddling was significantly more prevalent in the degenerative MV disease group. The mitral annulus of patients with RVD tended to be round and stiff.

A noninvasive method for the determination of in vivo mitral valve leaflet strains

Assessment of mitral valve (MV) function is important in many diagnostic, prognostic, and surgical planning applications for treatment of MV disease. Yet, to date, there are no accepted noninvasive methods for determination of MV leaflet deformation, which is a critical metric of MV function. In this study, we present a novel, completely noninvasive computational method to estimate MV leaflet in-plane strains from clinical-quality real-time three-dimensional echocardiography (rt-3DE) images. The images were first segmented to produce meshed medial-surface leaflet geometries of the open and closed states. To establish material point correspondence between the two states, an image-based morphing pipeline was implemented within a finite element (FE) modeling framework in which MV closure was simulated by pressurizing the open-state geometry, and local corrective loads were applied to enforce the actual MV closed shape. This resulted in a complete map of local systolic leaflet membrane strains, obtained from the final FE mesh configuration. To validate the method, we utilized an extant in vitro database of fiducially labeled MVs, imaged in conditions mimicking both the healthy and diseased states. Our method estimated local anisotropic in vivo strains with less than 10% error and proved to be robust to changes in boundary conditions similar to those observed in ischemic MV disease. Next, we applied our methodology to ovine MVs imaged in vivo with rt-3DE and compared our results to previously published findings of in vivo MV strains in the same type of animal as measured using surgically sutured fiducial marker arrays. In regions encompassed by fiducial markers, we found no significant differences in circumferential(P = 0.240) or radial (P = 0.808) strain estimates between the marker-based measurements and our novel noninvasive method. This method can thus be used for model validation as well as for studies of MV disease and repair.

New insights into mitral heart valve prolapse after chordae rupture through fluid-structure interaction computational modeling

Mitral valve (MV) dynamics depends on a force balance across the mitral leaflets, the chordae tendineae, the mitral annulus, the papillary muscles and the adjacent ventricular wall. Chordae rupture disrupts the link between the MV and the left ventricle (LV), causing mitral regurgitation (MR), the most common valvular disease. In this study, a fluid-structure interaction (FSI) modeling framework is implemented to investigate the impact of chordae rupture on the left heart (LH) dynamics and severity of MR. A control and seven chordae rupture LH models were developed to simulate a pathological process in which minimal chordae rupture precedes more extensive chordae rupture. Different non-eccentric and eccentric regurgitant jets were identified during systole. Cardiac efficiency was evaluated by the ratio of external stroke work. MV structural results showed that basal/strut chordae were the major load-bearing chordae. An increased number of ruptured chordae resulted in reduced basal/strut tension, but increased marginal/intermediate load. Chordae rupture in a specific scallop did not necessarily involve an increase in the stress of the entire prolapsed leaflet. This work represents a further step towards patient-specific modeling of pathological LH dynamics, and has the potential to improve our understanding of the biomechanical mechanisms and treatment of primary MR.

Three-Dimensional Mitral Valve Morphology in Children and Young Adults With Marfan Syndrome

BACKGROUND

Mitral valve (MV) prolapse is common in children with Marfan syndrome (MFS) and is associated with varying degrees of mitral regurgitation (MR). However, the three-dimensional (3D) morphology of the MV in children with MFS and its relation to the degree of MR are not known. The goals of this study were to describe the 3D morphology of the MV in children with MFS and to compare it to that in normal children.

METHODS

Three-dimensional transthoracic echocardiography was performed in 27 patients (3-21 years of age) meeting the revised Ghent criteria for MFS and 27 normal children matched by age (±1 year). The 3D geometry of the MV apparatus in midsystole was measured, and its association with clinical and two-dimensional echocardiographic parameters was examined.

RESULTS

Compared with age-matched control subjects, children with MFS had larger 3D annular areas (P < .02), smaller annular height/commissural width ratios (P < .001), greater billow volumes (P < .001), and smaller tenting heights, areas, and volumes (P < .001 for all). In multivariate modeling, larger leaflet billow volume in MFS was strongly associated with moderate or greater MR (P < .01). Intra- and interuser variability of 3D metrics was acceptable.

CONCLUSIONS

Children with MFS have flatter and more dilated MV annuli, greater billow volumes, and smaller tenting heights compared with normal control subjects. Larger billow volume is associated with MR. Three-dimensional MV quantification may contribute to the identification of patients with MFS and other connective tissue disorders. Further study of 3D MV geometry and its relation to the clinical progression of MV disease is warranted in this vulnerable population.

Mitral annuloplasty ring flexibility preferentially reduces posterior suture forces

Annuloplasty ring repair is a common procedure for the correction of mitral valve regurgitation. Commercially available rings vary in dimensions and material properties. Annuloplasty ring suture dehiscence from the native annulus is a catastrophic yet poorly understood phenomenon that has been reported across ring types. Recognizing that sutures typically dehisce from the structurally weaker posterior annulus, our group is conducting a multi-part study in search of ring design parameters that influence forces acting on posterior annular sutures in the beating heart. Herein, we report the effect of ring rigidity on suture forces. Measurements utilized custom force sensors, attached to annuloplasty rings and implanted in normal ovine subjects via standard surgical procedure. Tested rings included the semi-rigid Physio (Edwards Lifesciences) and rigid and flexible prototypes of matching geometry. While no significant differences due to ring stiffness existed for sutures in the anterior region, posterior forces were significantly reduced with use of the flexible ring (rigid: 1.95 ± 0.96 N, semi-rigid: 1.76 ± 1.19 N, flexible: 1.04 ± 0.63 N; p < 0.001). The ratio of anterior to posterior F_C scaled positively with increasing flexibility (p < 0.001), and posterior forces took more time to reach their peak load when a flexible ring was used (p < 0.001). This suggests a more rigid ring enables more rapid/complete force equilibration around the suture network, transferring higher anterior forces to the weaker posterior tissue. For mitral annuloplasties requiring ring rigidity, we propose a ring design concept to potentially disrupt this force transfer and improve suture retention.

Finite Element Analysis of Tricuspid Valve Deformation from Multi-slice Computed Tomography Images

Despite the growing clinical interest in the tricuspid valve (TV), there is an incomplete understanding of TV biomechanics which is important in normal TV function and successful TV repair techniques. Computational models with patient-specific human TV geometries can provide a quantitative understanding of TV biomechanic. Therefore, this study aimed to develop finite element (FE) models of human TVs from multi-slice computed tomography (MSCT) images to investigate chordal forces and leaflet stresses and strains. Three FE models were constructed for human subjects with healthy TVs from MSCT images and incorporated detailed leaflet geometries, realistic nonlinear anisotropic hyperelastic material properties of human TV, and physiological boundary conditions tracked from MSCT images. TV closure from diastole to systole was simulated. Chordal lengths were iteratively adjusted until the simulated TV geometries were in good agreement with the "true" geometries reconstructed from MSCT images at systole. Larger chordal forces were found on the strut (or basal) chords than on the rough zone chords and the total forces applied on the anterior papillary muscles by the strut chords were higher than those on the posterior or septal papillary muscles. At peak systolic pressure, the average maximum stress on the middle sections of the leaflets ranged from 30 to 90 kPa, while the average maximum principal strain values ranged from 0.16 to 0.30. The results from healthy TVs can serve as baseline biomechanical metrics of TV mechanics and may be used to inform TV repair device design. The computational approach developed could be one step towards developing computational models that may support pre-operative planning in complex TV repair procedures in the future.

Eliminating Regurgitation Reduces Fibrotic Remodeling of Functional Mitral Regurgitation Conditioned Valves

Functional mitral regurgitation (FMR) is an insidious and poorly understood condition affecting patients with myocardial disease. While current treatments reduce regurgitation, their ability to reverse mitral valve pathology is unclear. We utilized a pseudo-physiological flow loop to study how repair impacted valve composition. Porcine mitral valves were cultured in control geometry (native papillary muscle position and annular area) or high-tension FMR geometry (5 mm apical and 5 mm lateral displacement of papillary muscles, 65% increased annular area) for 2 weeks. To mimic repair, a reversal condition was created by returning one-week FMR conditioned valves to a non-regurgitant geometry and culturing for 1 week. Valve composition and material properties were analyzed. After two-week culture, FMR conditioned tissues were stiffer and stronger than control and underwent extensive fibrotic remodeling, with increased prolyl-4-hydroxylase, lysyl oxidase, matrix metalloproteinase-1, and decorin. The reversal condition displayed a heterogeneous, leaflet- and orientation-dependent response. Reversal-conditioned anterior leaflets and circumferential tissue sections continued to have significant fibrotic remodeling compared to control, whereas reversal-conditioned posterior leaflets, chordae tendineae, and radial tissue sections had significantly decreased remodeling compared to FMR-conditioned tissues. These findings suggest current repairs only partially reverse pathology, underscoring the need for innovation in the treatment of FMR.

Fully-coupled fluid-structure interaction simulation of the aortic and mitral valves in a realistic 3D left ventricle model

In this study, we present a fully-coupled fluid-structure interaction (FSI) framework that combines smoothed particle hydrodynamics (SPH) and nonlinear finite element (FE) method to investigate the coupled aortic and mitral valves structural response and the bulk intraventricular hemodynamics in a realistic left ventricle (LV) model during the entire cardiac cycle. The FSI model incorporates valve structures that consider native asymmetric leaflet geometries, anisotropic hyperelastic material models and human material properties. Comparison of FSI results with subject-specific echocardiography data demonstrates that the SPH-FE approach is able to quantitatively predict the opening and closing times of the valves, the mitral leaflet opening and closing angles, and the large-scale intraventricular flow phenomena with a reasonable agreement. Moreover, comparison of FSI results with a LV model without valves reveals substantial differences in the flow field. Peak systolic velocities obtained from the FSI model and the LV model without valves are 2.56 m/s and 1.16 m/s, respectively, compared to the Doppler echo data of 2.17 m/s. The proposed SPH-FE FSI framework represents a further step towards modeling patient-specific coupled LV-valve dynamics, and has the potential to improve our understanding of cardiovascular physiology and to support professionals in clinical decision-making.

High resolution imaging of the mitral valve in the natural state with 7 Tesla MRI

Imaging techniques of the mitral valve have improved tremendously during the last decade, but challenges persist. The delicate changes in annulus shape and papillary muscle position throughout the cardiac cycle have significant impact on the stress distribution in the leaflets and chords, thus preservation of anatomically accurate positioning is critical. The aim of this study was to develop an in vitro method and apparatus for obtaining high-resolution 3D MRI images of porcine mitral valves in both the diastolic and systolic configurations with physiologically appropriate annular shape, papillary muscle positions and orientations, specific to the heart from which the valve was harvested. Positioning and mounting was achieved through novel, customized mounting hardware consisting of papillary muscle and annulus holders with geometries determined via pre-mortem ultrasonic intra-valve measurements. A semi-automatic process was developed and employed to tailor Computer Aided Design models of the holders used to mount the valve. All valve mounting hardware was 3D printed using a stereolithographic printer, and the material of all fasteners used were brass for MRI compatibility. The mounted valves were placed within a clear acrylic case, capable of holding a zero-pressure and pressurized liquid bath of a MRI-compatible fluid. Obtaining images from the valve submerged in liquid fluid mimics the natural environment surrounding the valve, avoiding artefacts due to tissue surface tension mismatch and gravitational impact on tissue shape when not neutrally buoyant. Fluid pressure was supplied by reservoirs held at differing elevations and monitored and controlled to within ±1mmHg to ensure that the valves remained steady. The valves were scanned in a 7 Tesla MRI system providing a voxel resolution of at least 80μm. The systematic approach produced 3D datasets of high quality which, when combined with physiologically accurate positioning by the apparatus, can serve as an important input for validated computational models.

An Automated Expanded Polytetrafluoroethylene Suturing and Coaxial Fastener System for Mitral Chordae Replacement: Strength, Feasibility, and Healing

OBJECTIVE

Mitral valve (MV) chordae replacements can be technically challenging. Technology that remotely delivers and accurately secures artificial chordae may reduce the learning curve and improve the reliability of MV repairs.

METHODS

The technology involved two devices: a remote suturing device for delivery of expanded polytetrafluoroethylene (ePTFE) suture to the papillary muscle and a Coaxial titanium suture fastener (TF) device with integrated saline infusion for real-time determination of chordae length during fixation. A mechanical model simulating MV chordae tension in a beating heart quantified the durability of 120 coaxially fastened ePTFE sutures using TF over time. Investigation of the technology was performed in ex vivo porcine, ovine, and in situ cadaver hearts, whereas live-tissue testing was conducted in a survivor ovine model. Mitral valve repair procedures involved the iatrogenic induction of mitral regurgitation by the resection of one to two native MV chordae, followed by implantation of ePTFE suture using the technology. Epicardial echocardiography, saline infusion testing, and histologic analysis evaluated MV competence, repair integrity, and long-term healing.

RESULTS

Durability testing of ePTFE suture secured with TF demonstrated no degradation of TF pull-apart forces of for 440 million cycles. Mitral valve repairs using the technology were performed in eight sheep; four demonstrating proof of concept and four survived for an average of 6.5 months after completion of the procedure. At reoperation, echocardiography demonstrated trace to no mitral regurgitation with near complete endothelialization of the TF and artificial chordae.

CONCLUSIONS

This technology successfully enabled the implantation of artificial chordae while providing real-time adjustment of chordae length during MV repair. These results encourage further investigation of its use clinically.

Three-Dimensional Mitral Valve Morphology and Age-Related Trends in Children and Young Adults with Structurally Normal Hearts Using Transthoracic Echocardiography

BACKGROUND

The mitral valve has a complex three-dimensional (3D) morphology that is incompletely described by two-dimensional echocardiography (echo). Three-dimensional echo provides a more robust tool to analyze the mitral valve. The shape of the mitral annulus and leaflets, and differences with age, have not been described by 3D echo in normal children. Our objective was to characterize and quantify the 3D mitral valve morphology in children with normal transthoracic echocardiograms over a broad spectrum of age and to identify differences in valve shape with age.

METHODS

Three-dimensional midsystolic mitral valve models were constructed in 100 children and young adults with normal echocardiograms using 3D transthoracic images. Annular and leaflet metrics were quantified and regression equations were prepared. Interuser and intrauser variability was measured.

RESULTS

Two hundred fifty patients, from neonate to young adult, were retrospectively reviewed to obtain 100 evaluable patients (40% evaluable). The annular height to commissural width ratio of the mitral valve ("saddle shape") was preserved across age (median 24.3, IQR 21.8-28.1). Three-dimensional mitral valve area, length, and volume parameters were linearly related to body surface area (P < .001). The ratio of anterior to posterior leaflet length and posterior leaflet angle increased with body surface area (P = .0004 and .002, respectively) suggesting posterior movement of the coaptation line. Two-dimensional lateral annular diameter underestimated 3D lateral annular metrics (P < .001, mean difference 20-22%) but was highly correlated (R > 0.87, P < .001). Interuser and intrauser variability were acceptable.

CONCLUSIONS

Assessment of 3D mitral valve morphology in children is possible in a modern clinical pediatric echocardiography laboratory using transthoracic images, although further optimization of imaging is needed. The saddle shape of the mitral annulus was preserved across age and size. Most mitral valve parameters increased linearly with patient size. Further investigation is warranted to explore changes in valve morphology in the pediatric population in health and with disease.

Assessment of mitral valve geometric deformity in patients with ischemic heart disease using three-dimensional echocardiography

BACKGROUND

A full understanding of the geometry of the nonplanar saddle-shaped mitral annulus can provide valuable information regarding the pathophysiology of mitral regurgitation (MR).

AIM OF THE WORK

To investigate mitral annular geometric deformities using three-dimensional echocardiography among patients with ischemic coronary illness with and without mitral regurgitation.

METHODS

Three-dimensional transesophageal echocardiographic data were acquired intraoperatively from patients with ischemic heart disease with or without associated mitral regurgitation who experienced coronary artery bypass grafting and normal control subjects. The mitral annulus was analyzed for differences in geometry using QLAB software.

RESULTS

Left ventricular ejection fraction was reduced in patients with ischemic heart disease and MR (n = 21; Group 1) and without MR (n = 7; Group 2) compared with that in normal subjects (n = 14; Group 3) (43.4% ± 11.8% and 35.9% ± 13.6% vs. 52.6% ± 9.3%, respectively; p = 0.015). Mitral annular height and mitral annular saddle-shaped nonplanarity were significantly lower in Group 1 compared to Group 2 and Group 3 (6.00 ± 1.07 mm, 7.96 ± 0.93 mm and 8.31 ± 1.12 mm; p < 0.0001) and (0.19 ± 0.04, 0.26 ± 0.04 and 0.26 ± 0.03; p < 0.0001) respectively while mitral annular ellipsicity and Mitral valve tenting volume were significantly higher in the same group (1) (114.82% ± 22.47%, 100.21% ± 9.87% and 97.29% ± 14.37%; p = 0.0421) and (2.73 ± 1.11, 2.20 ± 1.39 and 0.87 ± 0.67) respectively. Vena contracta diameter was inversely correlated with the mitral annular height (r = -0.82; p < 0.0001) and saddle-shaped nonplanarity of the annulus (r = -0.68; p < 0.0001).

CONCLUSION

Among patients with ischemic heart disease, there are significant increases in mitral valve tenting volume and height, and those with mitral regurgitation exhibited a reduced mitral annular height, a shallower saddle shape annulus and losses of ellipsicity of the annulus.

Finite Element Analysis of Patient-Specific Mitral Valve with Mitral Regurgitation

Functional mitral regurgitation (FMR) is a significant complication of left ventricular dysfunction and strongly associated with a poor prognosis. In this study, we developed a patient-specific finite element (FE) model of the mitral apparatus in a FMR patient which included: both leaflets with thickness, annulus, chordae tendineae, and chordae insertions on the leaflets and origins on the papillary muscles. The FE model incorporated human age- and gender-matched anisotropic hyperelastic material properties, and MV closure at systole was simulated. The model was validated by comparing the FE results from valve closure simulation with the in vivo geometry of the MV at systole. It was found that the FE model could not replicate the in vivo MV geometry without the application of tethering pre-tension force in the chordae at diastole. Upon applying the pre-tension force and performing model optimization by adjusting the chordal length, position, and leaflet length, a good agreement between the FE model and the in vivo model was established. Not only were the chordal forces high at both diastole and systole, but the tethering force on the anterior papillary muscle was higher than that of the posterior papillary muscle, which resulted in an asymmetrical gap with a larger orifice area at the anterolateral commissure resulting in MR. The analyses further show that high peak stress and strain were found at the chordal insertions where large chordal tethering forces were found. This study shows that the pre-tension tethering force plays an important role in accurately simulating the MV dynamics in this FMR patient, particularly in quantifying the degree of leaflet coaptation and stress distribution. Due to the complexity of the disease, the patient-specific computational modeling procedure of FMR patients presented should be further evaluated using a large patient cohort. However, this study provides useful insights into the MV biomechanics of a FMR patient, and could serve as a tool to assist in pre-operative planning for MV repair or replacement surgical or interventional procedures.

Bench Models for Assessing the Mechanics of Mitral Valve Repair and Percutaneous Surgery

Rapid preclinical evaluations of mitral valve (MV) mechanics are currently best facilitated by bench models of the left ventricle (LV). This review aims to provide a comprehensive assessment of these models to aid interpretation of their resulting data, inform future experimental evaluations, and further the translation of results to procedure and device development. For this review, two types of experimental bench models were evaluated. Rigid LV models were characterized as fluid-mechanical systems capable of testing explanted MVs under static and or pulsatile left heart hemodynamics. Passive LV models were characterized as explanted hearts whose left side is placed in series with a static or pulsatile flow-loop. In both systems, MV function and mechanics can be quantitatively evaluated. Rigid and passive LV models were characterized and evaluated. The materials and methods involved in their construction, function, quantitative capabilities, and disease modeling were described. The advantages and disadvantages of each model are compared to aid the interpretation of their resulting data and inform future experimental evaluations. Repair and percutaneous studies completed in these models were additionally summarized with perspective on future advances discussed. Bench models of the LV provide excellent platforms for quantifying MV repair mechanics and function. While exceptional work has been reported, more research and development is necessary to improve techniques and devices for repair and percutaneous surgery. Continuing efforts in this field will significantly contribute to the further development of procedures and devices, predictions of long-term performance, and patient safety.

On the effects of leaflet microstructure and constitutive model on the closing behavior of the mitral valve

Recent long-term studies showed an unsatisfactory recurrence rate of severe mitral regurgitation 3-5 years after surgical repair, suggesting that excessive tissue stresses and the resulting strain-induced tissue failure are potential etiological factors controlling the success of surgical repair for treating mitral valve (MV) diseases. We hypothesized that restoring normal MV tissue stresses in MV repair techniques would ultimately lead to improved repair durability through the restoration of MV normal homeostatic state. Therefore, we developed a micro- and macro- anatomically accurate MV finite element model by incorporating actual fiber microstructural architecture and a realistic structure-based constitutive model. We investigated MV closing behaviors, with extensive in vitro data used for validating the proposed model. Comparative and parametric studies were conducted to identify essential model fidelity and information for achieving desirable accuracy. More importantly, for the first time, the interrelationship between the local fiber ensemble behavior and the organ-level MV closing behavior was investigated using a computational simulation. These novel results indicated not only the appropriate parameter ranges, but also the importance of the microstructural tuning (i.e., straightening and re-orientation) of the collagen/elastin fiber networks at the macroscopic tissue level for facilitating the proper coaptation and natural functioning of the MV apparatus under physiological loading at the organ level. The proposed computational model would serve as a logical first step toward our long-term modeling goal-facilitating simulation-guided design of optimal surgical repair strategies for treating diseased MVs with significantly enhanced durability.

Mitral valve disease--morphology and mechanisms

Mitral valve disease is a frequent cause of heart failure and death. Emerging evidence indicates that the mitral valve is not a passive structure, but--even in adult life--remains dynamic and accessible for treatment. This concept motivates efforts to reduce the clinical progression of mitral valve disease through early detection and modification of underlying mechanisms. Discoveries of genetic mutations causing mitral valve elongation and prolapse have revealed that growth factor signalling and cell migration pathways are regulated by structural molecules in ways that can be modified to limit progression from developmental defects to valve degeneration with clinical complications. Mitral valve enlargement can determine left ventricular outflow tract obstruction in hypertrophic cardiomyopathy, and might be stimulated by potentially modifiable biological valvular-ventricular interactions. Mitral valve plasticity also allows adaptive growth in response to ventricular remodelling. However, adverse cellular and mechanobiological processes create relative leaflet deficiency in the ischaemic setting, leading to mitral regurgitation with increased heart failure and mortality. Our approach, which bridges clinicians and basic scientists, enables the correlation of observed disease with cellular and molecular mechanisms, leading to the discovery of new opportunities for improving the natural history of mitral valve disease.

Biomechanical evaluation of the pathophysiologic developmental mechanisms of mitral valve prolapse: effect of valvular morphologic alteration

Mitral valve prolapse (MVP) refers to an excessive billowing of the mitral valve (MV) leaflets across the mitral annular plane into the left atrium during the systolic portion of the cardiac cycle. The underlying mechanisms for the development of MVP and mitral regurgitation in association with MV tissue remodeling are still unclear. We performed computational MV simulations to investigate the pathophysiologic developmental mechanisms of MVP. A parametric MV geometry model was utilized for this study. Posterior leaflet enlargement and posterior chordal elongation models were created by adjusting the geometry of the posterior leaflet and chordae, respectively. Dynamic finite element simulations of MV function were performed over the complete cardiac cycle. Computational simulations demonstrated that enlarging posterior leaflet area increased large stress concentration in the posterior leaflets and chordae, and posterior chordal elongation decreased leaflet coaptation. When MVP was accompanied by both posterior leaflet enlargement and chordal elongation simultaneously, the posterior leaflet was exposed to extremely large prolapse with a substantial lack of leaflet coaptation. These data indicate that MVP development is closely related to tissue alterations of the leaflets and chordae. This biomechanical evaluation strategy can help us better understand the pathophysiologic developmental mechanisms of MVP.

Mitral Annular Kinetics, Left Atrial, and Left Ventricular Diastolic Function Post Mitral Valve Repair in Degenerative Mitral Regurgitation

Objective

The relationship of mitral annular (MA) kinetics to left ventricular (LV) and left atrial (LA) function before and after mitral valve (MV) repair has not been well studied. Here we sought to provide comprehensive analysis that relates to MA motions, and LA and LV diastolic function post MV repair.

Methods

Three-dimensional analyses of mitral annular motion, LA function, and LV volumetric and diastolic strain rates were performed on 35 degenerative mitral regurgitation (MR) patients at baseline and 1-year post MV repair, and 51 normal controls, utilizing cardiac magnetic resonance imaging with tissue tagging.

Results

All had normal LV ejection fraction (EF) at baseline. LV and LA EFs decreased 1-year post-surgery vs. controls. LV early diastolic myocardial strain rates decreased post-surgery along with decreases in normalized early diastolic filling rate, E/A ratio, and early diastolic MA relaxation rates. Post-surgical LA late active kick remained higher in MR patients vs. control. LV and LA EFs were significantly associated with peak MA centroid to apex shortening. Furthermore, during LV systolic phase, peak LV ejection and LA filling rates were significantly correlated with peak MA centroid to apex shortening rate, respectively. While during LV diastolic phase, both peak early diastolic MA centroid to apex relaxation rate and LA ejection rate were positively significantly associated with LV peak early diastolic filling rate.

Conclusion

MA motion is significantly associated with LA and LV function. Mitral annular motion, left atrial function, and LV diastolic strain rates are still impaired 1 year post MV repair. Long-term effects of these impairments should be prospectively evaluated.

Regurgitation Hemodynamics Alone Cause Mitral Valve Remodeling Characteristic of Clinical Disease States In Vitro

Mitral valve regurgitation is a challenging clinical condition that is frequent, highly varied, and poorly understood. While the causes of mitral regurgitation are multifactorial, how the hemodynamics of regurgitation impact valve tissue remodeling is an understudied phenomenon. We employed a pseudo-physiological flow loop capable of long-term organ culture to investigate the early progression of remodeling in living mitral valves placed in conditions resembling mitral valve prolapse (MVP) and functional mitral regurgitation (FMR). Valve geometry was altered to mimic the hemodynamics of controls (no changes from native geometry), MVP (5 mm displacement of papillary muscles towards the annulus), and FMR (5 mm apical, 5 mm lateral papillary muscle displacement, 65% larger annular area). Flow measurements ensured moderate regurgitant fraction for regurgitation groups. After 1-week culture, valve tissues underwent mechanical and compositional analysis. MVP conditioned tissues were less stiff, weaker, and had elevated collagen III and glycosaminoglycans. FMR conditioned tissues were stiffer, more brittle, less extensible, and had more collagen synthesis, remodeling, and crosslinking related enzymes and proteoglycans, including decorin, matrix metalloproteinase-1, and lysyl oxidase. These models replicate clinical findings of MVP (myxomatous remodeling) and FMR (fibrotic remodeling), indicating that valve cells remodel extracellular matrix in response to altered mechanical homeostasis resulting from disease hemodynamics.

A finite strain nonlinear human mitral valve model with fluid-structure interaction

A computational human mitral valve (MV) model under physiological pressure loading is developed using a hybrid finite element immersed boundary method, which incorporates experimentally-based constitutive laws in a three-dimensional fluid-structure interaction framework. A transversely isotropic material constitutive model is used to characterize the mechanical behaviour of the MV tissue based on recent mechanical tests of healthy human mitral leaflets. Our results show good agreement, in terms of the flow rate and the closing and opening configurations, with measurements from in vivo magnetic resonance images. The stresses in the anterior leaflet are found to be higher than those in the posterior leaflet and are concentrated around the annulus trigons and the belly of the leaflet. The results also show that the chordae play an important role in providing a secondary orifice for the flow when the valve opens. Although there are some discrepancies to be overcome in future work, our simulations show that the developed computational model is promising in mimicking the in vivo MV dynamics and providing important information that are not obtainable by in vivo measurements.

Mitral valve annuloplasty and anterior leaflet augmentation for functional ischemic mitral regurgitation: quantitative comparison of coaptation and subvalvular tethering

OBJECTIVE

Although restrictive mitral annuloplasty (RMA) has been the preferred surgical treatment of functional ischemic mitral regurgitation (FIMR), some patients with severely dilated left ventricles will experience recurrent mitral regurgitation (MR). Consequently, new surgical strategies have been entertained to compensate for severely dilated ventricles by maximizing coaptation and reducing subvalvular tethering. Anterior leaflet augmentation (ALA) with mitral annuloplasty has been theorized to meet these goals. We compared the mechanistic effects of RMA and adjunct ALA in the setting of FIMR.

METHODS

Mitral valves were mounted in a clinically relevant left heart simulator. The tested conditions included control, FIMR, RMA, and true-size annuloplasty with either a small or large ALA. The A2-P2 leaflet coaptation length, MR, and strut and intermediary chordal forces were quantified. All repairs alleviated the MR. The coaptation length was significantly increased from FIMR to RMA, small ALA, and large ALA (P<.001). Between repairs, a large ALA created the greatest length of coaptation (P<.05). Tethering forces from the posteromedial strut chordae were reduced from the FIMR condition by all repairs (P<.001). Only a large ALA reduced the intermediate chordal tethering from the FIMR condition (P<.05).

CONCLUSIONS

A large ALA procedure created the greatest coaptation and reduced chordal tethering. Although all repairs abolished MR acutely, the repairs that create the greatest coaptation might conceivably produce a more robust and lasting repair in the chronic stage. A clinical need still exists to best identify which patients with altered mitral valve geometries would most benefit from an adjunct procedure or RMA alone.

Quantitative Evaluation of Annuloplasty on Mitral Valve Chordae Tendineae Forces to Supplement Surgical Planning Model Development

PURPOSE

Computational models of the heart's mitral valve (MV) exhibit potential for preoperative surgical planning in ischemic mitral regurgitation (IMR). However challenges exist in defining boundary conditions to accurately model the function and response of the chordae tendineae to both IMR and surgical annuloplasty repair. Towards this goal, a ground-truth data set was generated by quantifying the isolated effects of IMR and mitral annuloplasty on leaflet coaptation, regurgitation, and tethering forces of the anterior strut and posterior intermediary chordae tendineae.

METHODS

MVs were excised from ovine hearts (N=15) and mounted in a pulsatile heart simulator which has been demonstrated to mimic the systolic MV geometry and coaptation of healthy and chronic IMR sheep. Strut and intermediary chordae from both MV leaflets (N=4) were instrumented with force transducers. Tested conditions included a healthy control, IMR, oversized annuloplasty, true-sized annuloplasty, and undersized mitral annuloplasty. A2-P2 leaflet coaptation length, regurgitation, and chordal tethering were quantified and statistically compared across experimental conditions.

RESULTS

IMR was successfully simulated with significant increases in MR, tethering forces for each of the chordae, and decrease in leaflet coaptation (p<.05). Compared to the IMR condition, increasing levels of downsized annuloplasty significantly reduced regurgitation, increased coaptation, reduced posteromedial papillary muscle strut chordal forces, and reduced intermediary chordal forces from the anterolateral papillary muscle (p<.05).

CONCLUSIONS

These results provide for the first time a novel comprehensive data set for refining the ability of computational MV models to simulate IMR and varying sizes of complete rigid ring annuloplasty.

Isolated effect of geometry on mitral valve function for in silico model development

Computational models for the heart's mitral valve (MV) exhibit several uncertainties that may be reduced by further developing these models using ground-truth data-sets. This study generated a ground-truth data-set by quantifying the effects of isolated mitral annular flattening, symmetric annular dilatation, symmetric papillary muscle (PM) displacement and asymmetric PM displacement on leaflet coaptation, mitral regurgitation (MR) and anterior leaflet strain. MVs were mounted in an in vitro left heart simulator and tested under pulsatile haemodynamics. Mitral leaflet coaptation length, coaptation depth, tenting area, MR volume, MR jet direction and anterior leaflet strain in the radial and circumferential directions were successfully quantified at increasing levels of geometric distortion. From these data, increase in the levels of isolated PM displacement resulted in the greatest mean change in coaptation depth (70% increase), tenting area (150% increase) and radial leaflet strain (37% increase) while annular dilatation resulted in the largest mean change in coaptation length (50% decrease) and regurgitation volume (134% increase). Regurgitant jets were centrally located for symmetric annular dilatation and symmetric PM displacement. Asymmetric PM displacement resulted in asymmetrically directed jets. Peak changes in anterior leaflet strain in the circumferential direction were smaller and exhibited non-significant differences across the tested conditions. When used together, this ground-truth data-set may be used to parametrically evaluate and develop modelling assumptions for both the MV leaflets and subvalvular apparatus. This novel data may improve MV computational models and provide a platform for the development of future surgical planning tools.

Mechanics of healthy and functionally diseased mitral valves: a critical review

The mitral valve is a complex apparatus with multiple constituents that work cohesively to ensure unidirectional flow between the left atrium and ventricle. Disruption to any or all of the components-the annulus, leaflets, chordae, and papillary muscles-can lead to backflow of blood, or regurgitation, into the left atrium, which deleteriously effects patient health. Through the years, a myriad of surgical repairs have been proposed; however, a careful appreciation for the underlying structural mechanics can help optimize long-term repair durability and inform medical device design. In this review, we aim to present the experimental methods and significant results that have shaped the current understanding of mitral valve mechanics. Data will be presented for all components of the mitral valve apparatus in control, pathological, and repaired conditions from human, animal, and in vitro studies. Finally, current strategies of patient specific and noninvasive surgical planning will be critically outlined.

Accuracy of a mitral valve segmentation method using J-splines for real-time 3D echocardiography data

Patient-specific models of the heart's mitral valve (MV) exhibit potential for surgical planning. While advances in 3D echocardiography (3DE) have provided adequate resolution to extract MV leaflet geometry, no study has quantitatively assessed the accuracy of their modeled leaflets vs. a ground-truth standard for temporal frames beyond systolic closure or for differing valvular dysfunctions. The accuracy of a 3DE-based segmentation methodology based on J-splines was assessed for porcine MVs with known 4D leaflet coordinates within a pulsatile simulator during closure, peak closure, and opening for a control, prolapsed, and billowing MV model. For all time points, the mean distance error between the segmented models and ground-truth data were 0.40 ± 0.32 mm, 0.52 ± 0.51 mm, and 0.74 ± 0.69 mm for the control, flail, and billowing models. For all models and temporal frames, 95% of the distance errors were below 1.64 mm. When applied to a patient data set, segmentation was able to confirm a regurgitant orifice and post-operative improvements in coaptation. This study provides an experimental platform for assessing the accuracy of an MV segmentation methodology at phases beyond systolic closure and for differing MV dysfunctions. Results demonstrate the accuracy of a MV segmentation methodology for the development of future surgical planning tools.

In vitro mitral valve simulator mimics systolic valvular function of chronic ischemic mitral regurgitation ovine model

BACKGROUND

This study was undertaken to evaluate an in vitro mitral valve (MV) simulator's ability to mimic the systolic leaflet coaptation, regurgitation, and leaflet mechanics of a healthy ovine model and an ovine model with chronic ischemic mitral regurgitation (IMR).

METHODS

Mitral valve size and geometry of both healthy ovine animals and those with chronic IMR were used to recreate systolic MV function in vitro. A2-P2 coaptation length, coaptation depth, tenting area, anterior leaflet strain, and MR were compared between the animal groups and valves simulated in the bench-top model.

RESULTS

For the control conditions, no differences were observed between the healthy animals and simulator in coaptation length (p = 0.681), coaptation depth (p = 0.559), tenting area (p = 0.199), and anterior leaflet strain in the radial (p = 0.230) and circumferential (p = 0.364) directions. For the chronic IMR conditions, no differences were observed between the models in coaptation length (p = 0.596), coaptation depth (p = 0.621), tenting area (p = 0.879), and anterior leaflet strain in the radial (p = 0.151) and circumferential (p = 0.586) directions. MR was similar between IMR models, with an asymmetrical jet originating from the tethered A3-P3 leaflets.

CONCLUSIONS

This study is the first to demonstrate the effectiveness of an in vitro simulator to emulate the systolic valvular function and mechanics of a healthy ovine model and one with chronic IMR. The in vitro IMR model provides the capability to recreate intermediary and exacerbated levels of annular and subvalvular distortion for which IMR repairs can be simulated. This system provides a realistic and controllable test platform for the development and evaluation of current and future IMR repairs.