Attenuating the ear canal feedback pressure of a laser-driven hearing aid

Detection, Speech Recognition, Loudness, and Preference Outcomes With a Direct Drive Hearing Aid: Effects of Bandwidth

Direct drive hearing devices, which deliver a signal directly to the middle ear by vibrating the tympanic membrane via a lens placed in contact with the umbo, are designed to provide an extension of audible bandwidth, but there are few studies of the effects of these devices on preference, speech intelligibility, and loudness. The current study is the first to compare aided speech understanding between narrow and extended bandwidth conditions for listeners with hearing loss while fitted with a direct drive hearing aid system. The study also explored the effect of bandwidth on loudness perception and investigated subjective preference for bandwidth. Fifteen adult hearing aid users with symmetrical sensorineural hearing loss participated in a prospective, within-subjects, randomized single-blind repeated-measures study. Participants wore the direct drive hearing aids for 4 to 15 weeks (average 6 weeks) prior to outcome measurement. Outcome measures were completed in various bandwidth conditions achieved by reducing the gain of the device above 5000 Hz or by filtering the stimuli. Aided detection thresholds provided evidence of amplification to 10000 Hz. A significant improvement was found in high-frequency consonant detection and recognition, as well as for speech in noise performance in the full versus narrow bandwidth conditions. Subjective loudness ratings increased with provision of the full bandwidth available; however, real-world trials showed most participants were able to wear the full bandwidth hearing aids with only small adjustments to the prescription method. The majority of participants had either no preference or a preference for the full bandwidth setting.

Mouse middle-ear forward and reverse acoustics

The mouse is an important animal model for hearing science. However, our knowledge of the relationship between mouse middle-ear (ME) anatomy and function is limited. The ME not only transmits sound to the cochlea in the forward direction, it also transmits otoacoustic emissions generated in the cochlea to the ear canal (EC) in the reverse direction. Due to experimental limitations, a complete characterization of the mouse ME has not been possible. A fully coupled finite-element model of the mouse EC, ME, and cochlea was developed and calibrated against experimental measurements. Impedances of the EC, ME, and cochlea were calculated, alongside pressure transfer functions for the forward, reverse, and round-trip directions. The effects on sound transmission of anatomical changes such as removing the ME cavity, pars flaccida, and mallear orbicular apophysis were also calculated. Surprisingly, below 10 kHz, the ME cavity, eardrum, and stapes annular ligament were found to significantly affect the cochlear input impedance, which is a result of acoustic coupling through the round window. The orbicular apophysis increases the delay of the transmission line formed by the flexible malleus, incus, and stapes, and improves the forward sound-transmission characteristics in the frequency region of 7-30 kHz.

Sound Quality Ratings of Amplified Speech and Music Using a Direct Drive Hearing Aid: Effects of Bandwidth

OBJECTIVE

To determine sound quality for extended bandwidth amplification using a direct drive hearing device.

STUDY DESIGN

Prospective double-blind within-subjects repeated measures study.

SETTING

University hearing research laboratories.

PATIENTS

Fifteen experienced hearing aid users with symmetric mild-sloping-to-severe sensorineural hearing loss.

INTERVENTIONS

Sound quality ratings of speech and music passages were obtained using the Multiple Stimulus with Hidden References and Anchors (MUSHRA) protocol after wearing a direct drive hearing aid for at least 4 weeks. Passages were processed to filter out low-frequency (below 123 and 313 Hz) and high-frequency (above 4455, 5583, 6987, and 10,869 Hz) energy.

MAIN OUTCOME MEASURES

Comparison of sound quality ratings for speech and music between low and high-pass filter frequencies measured from 0 to 100, where 0 represents "bad" and 100 represents "excellent."

RESULTS

Wider bandwidth stimuli received higher sound quality ratings compared with narrower bandwidth stimuli. Conditions with more low-frequency energy (full-band and 123 Hz cut-off) were rated as having higher sound quality. More low-frequency energy in the 123 Hz condition was rated as having higher sound versus the 313 Hz condition (mean difference: 11.2%, p = 0.001). Full-band conditions with more low- and high-frequency energy were higher than the other high-frequency cutoff conditions (mean difference range: 12.9-15%, p < 0.001).

CONCLUSIONS

The direct drive system provides higher sound quality of both speech and music compared to narrowband conditions. Sound quality improvements were mainly attributable to low-frequency sound, but stimuli with specific high-frequency content were rated with higher sound quality when additional high-frequency energy was present.

Achieved Gain and Subjective Outcomes for a Wide-Bandwidth Contact Hearing Aid Fitted Using CAM2

Supplemental Digital Content is available in the text.

Objectives:

The objective of this study was to test the ability to achieve, maintain, and subjectively benefit from extended high-frequency amplification in a real-world use scenario, with a device that restores audibility for frequencies up to 10 kHz.

Design:

A total of 78 participants (149 ears) with mild to moderately-severe sensorineural hearing loss completed one of two studies conducted across eight clinical sites. Participants were fitted with a light-driven contact hearing aid (the Earlens system) that directly drives the tympanic membrane, allowing extended high-frequency output and amplification with minimal acoustic feedback. Cambridge Method for Loudness Equalization 2 - High Frequency (CAM2)-prescribed gains for experienced users were used for initial fitting, and adjustments were made when required according to participant preferences for loudness and comfort or when measures of functional gain (FG) indicated that more or less gain was needed. Participants wore the devices for an extended period. Prescribed versus adjusted output and gain, frequency-specific FG, and self-perceived benefit assessed with the Abbreviated Profile of Hearing Aid Benefit, and a custom questionnaire were documented. Self-perceived benefit results were compared with those for unaided listening and to ratings with participants’ own acoustic hearing aids.

Results:

The prescribed low-level insertion gain from 6 to 10 kHz averaged 53 dB across all ears, with a range from 26 to 86 dB. After adjustment, the gain from 6 to 10 kHz decreased to an average of 45 dB with a range from 16 to 86 dB. Measured FG averaged 39 dB from 6 to 10 kHz with a range from 11 to 62 dB. Abbreviated Profile of Hearing Aid Benefit results revealed a significant improvement in communication relative to unaided listening, averaging 28 to 32 percentage points for the background noise, reverberation, and ease of communication subscales. Relative to participants’ own hearing aids, the subscales ease of communication and aversiveness showed small but significant improvements for Earlens ranging from 6 to 7 percentage points. For the custom satisfaction questionnaire, most participants rated the Earlens system as better than their own hearing aids in most situations.

Conclusions:

Participants used and reported subjective benefit from the Earlens system. Most participants preferred slightly less gain at 6 to 10 kHz than prescribed for experienced users by CAM2, preferring similar gains to those prescribed for inexperienced users, but gains over the extended high frequencies were high relative to those that are currently available with acoustic hearing aids.

Inappropriate Use of the "Rosowski Criteria" and "Modified Rosowski Criteria" for Assessing the Normal Function of Human Temporal Bones

Important research by Rosowski et al. [Twenty-Seventh Meeting of the Association for Research in Otolaryngology, 2004, p. 275] has led to a standard practice by the American Society for Testing Materials [West Conshohocken: ASTM International; 2014] to assess normal function of temporal bones used in the development of novel middle ear actuators and sensors. Rosowki et al. [Audiol Neurotol. 2007; 12(4): 265-76] have since suggested that the original criteria are too restrictive and have proposed modified criteria. We show that both the original and modified criteria are inappropriate for assessing individual temporal bones. Moreover, we suggest that both the original and modified Rosowski criteria should be applied with caution when assessing whether mean data from a study are within physiological norms because the multiple comparisons resulting from verification at each frequency will lead to very liberal rejection. The standard practice, however, has led to the collection of more extensive and consistent data. We suggest that it is now opportune to use these data to further modify the Rosowski criteria.

Frequency-specific activation of the peripheral auditory system using optoacoustic laser stimulation

Hearing impairment is one of the most common sensory deficits in humans. Hearing aids are helpful to patients but can have poor sound quality or transmission due to insufficient output or acoustic feedback, such as for high frequencies. Implantable devices partially overcome these issues but require surgery with limited locations for device attachment. Here, we investigate a new optoacoustic approach to vibrate the hearing organ with laser stimulation to improve frequency bandwidth, not requiring attachment to specific vibratory structures, and potentially reduce acoustic feedback. We developed a laser pulse modulation strategy and simulated its response at the umbo (1-10 kHz) based on a convolution-based model. We achieved frequency-specific activation in which non-contact laser stimulation of the umbo, as well as within the middle ear at the round window and otic capsule, induced precise shifts in the maximal vibratory response of the umbo and neural activation within the inferior colliculus of guinea pigs, corresponding to the targeted, modelled and then stimulated frequency. There was also no acoustic feedback detected from laser stimulation with our experimental setup. These findings open up the potential for using a convolution-based optoacoustic approach as a new type of laser hearing aid or middle ear implant.

Fluid-Structure Finite-Element Modelling and Clinical Measurement of the Wideband Acoustic Input Admittance of the Newborn Ear Canal and Middle Ear

The anatomical differences between the newborn ear and the adult one result in different input admittance responses in newborns than those in adults. Taking into account fluid-structure interactions, we have developed a finite-element model to investigate the wideband admittance responses of the ear canal and middle ear in newborns for frequencies up to 10 kHz. We have also performed admittance measurements on a group of 23 infants with ages between 14 and 28 days, for frequencies from 250 to 8000 Hz with 1/12-octave resolution. Sensitivity analyses of the model were performed to investigate the contributions of the ear canal and middle ear to the overall admittance responses, as well as the effects of the material parameters, measurement location and geometrical variability. The model was validated by comparison with our new data and with data from the literature. The model provides a quantitative understanding of the canal and middle-ear resonances around 500 and 1800 Hz, respectively, and also predicts the effects of the first resonance mode of the middle-ear cavity (around 6 kHz) as well as the first and second standing-wave modes in the ear canal (around 7.2 and 9.6 kHz, respectively), which may explain features seen in our high-frequency-resolution clinical measurements.