Metal-dependent inhibition of HIV-1 integrase by beta-diketo acids and resistance of the soluble double-mutant (F185K/C280S)

The Integrase: An Overview of a Key Player Enzyme in the Antiviral Scenario

Integration of a desossiribonucleic acid (DNA) copy of the viral ribonucleic acid (RNA) into host genomes is a fundamental step in the replication cycle of all retroviruses. The highly conserved virus-encoded Integrase enzyme (IN; EC 2.7.7.49) catalyzes such a process by means of two consecutive reactions named 3'-processing (3-P) and strand transfer (ST). The Authors report and discuss the major discoveries and advances which mainly contributed to the development of Human Immunodeficiency Virus (HIV) -IN targeted inhibitors for therapeutic applications. All the knowledge accumulated over the years continues to serve as a valuable resource for the design and development of effective antiretroviral drugs.

Coevolved Multidrug-Resistant HIV-1 Protease and Reverse Transcriptase Influences Integrase Drug Susceptibility and Replication Fitness

Integrase strand transfer inhibitors (InSTIs) are recommended agents in first-line combination antiretroviral therapy (cART). We examined the evolution of drug resistance mutations throughout HIV-1 pol and the effects on InSTI susceptibility and viral fitness. We performed single-genome sequencing of full-length HIV-1 pol in a highly treatment-experienced patient, and determined drug susceptibility of patient-derived HIV-1 genomes using a phenotypic assay encompassing full-length pol gene. We show the genetic linkage of multiple InSTI-resistant haplotypes containing major resistance mutations at Y143, Q148 and N155 to protease inhibitor (PI) and reverse transcriptase inhibitor (RTI) resistance mutations. Phenotypic analysis of viruses expressing patient-derived IN genes with eight different InSTI-resistant haplotypes alone or in combination with coevolved protease (PR) and RT genes exhibited similar levels of InSTI susceptibility, except for three haplotypes that showed up to 3-fold increases in InSTI susceptibility (p ≤ 0.032). The replicative fitness of most viruses expressing patient-derived IN only significantly decreased, ranging from 8% to 56% (p ≤ 0.01). Interestingly, the addition of coevolved PR + RT significantly increased the replicative fitness of some haplotypes by up to 73% (p ≤ 0.024). Coevolved PR + RT contributes to the susceptibility and viral fitness of patient-derived IN viruses. Maintaining patients on failing cART promotes the selection of fitter resistant strains, and thereby limits future therapy options.

Biochemical activity of RAGs is impeded by Dolutegravir, an HIV integrase inhibitor

HIV is a retrovirus that infects CD4+ T lymphocytes in human beings and causes immunodeficiency. In the recent years, various therapies have been developed against HIV, including targeting the HIV specific protein, integrase, responsible for integration of HIV cDNA into host DNA. Although, integrase is specific to HIV, it has functional and structural similarity with RAG1, one of the partner proteins associated with V(D)J recombination, a process by which immune diversity is generated in humans. Currently, there are three HIV integrase inhibitors: Elvitegravir, Dolutegravir, and Raltegravir, in the market which have been approved by the FDA (USA). All three drugs are used in anti-retroviral therapy (ART). Previously, we showed that amongst the HIV inhibitors, Elvitegravir could significantly decrease B cell maturation in vivo and inhibit the physiological activities of RAGs in vitro, unlike Raltegravir. In the present study, we address the effect of second-generation integrase inhibitor, Dolutegravir on RAG activities. Binding and nicking studies showed that, Dolutegravir could decrease the binding efficiency of RAG1 domains and cleavage on DNA substrates, but not as considerably as Elvitegravir. Thus, we show that although the integrase inhibitors such as Elvitegravir show an affinity towards RAG1, the newer molecules may have lesser side-effects.

Molecular dynamic simulations to investigate the structural impact of known drug resistance mutations on HIV-1C Integrase-Dolutegravir binding

Resistance associated mutations (RAMs) threaten the long-term success of combination antiretroviral therapy (cART) outcomes for HIV-1 treatment. HIV-1 Integrase (IN) strand transfer inhibitors (INSTIs) have proven to be a viable option for highly specific HIV-1 therapy. The INSTI, Dolutegravir is recommended by the World Health Organization for use as first-line cART. This study aims to understand how RAMs affect the stability of IN, as well as the binding of the drug Dolutegravir to the catalytic pocket of the protein. A homology model of HIV-1 subtype C IN was successfully constructed and validated. The site directed mutator webserver was used to predict destabilizing and/or stabilizing effects of known RAMs while FoldX confirmed any changes in protein energy upon introduction of mutation. Also, interaction analysis was performed between neighbouring residues. Three mutations known to be associated with Raltegravir, Elvitegravir and Dolutegravir resistance were selected; E92Q, G140S and Y143R, for molecular dynamics simulations. The structural quality assessment indicated high reliability of the HIV-1C IN tetrameric structure, with more than 90% confidence in modelled regions. Change in free energy for the three mutants indicated different effects, while simulation analysis showed G140S to have the largest affect on protein stability and flexibility. This was further supported by weaker non-bonded pairwise interaction energy and binding free energy values between the drug DTG and E92Q, Y143R and G140S mutants suggesting reduced binding affinity, as indicated by interaction analysis in comparison to the WT. Our findings suggest the G140S mutant has the strongest effect on the HIV-1C IN protein structure and Dolutegravir binding. To the best of our knowledge, this is the first study that uses the consensus wild type HIV-1C IN sequence to build an accurate 3D model to understand the effect of three known mutations on DTG drug binding in a South Africa context.

The Impact of HIV-1 Drug Escape on the Global Treatment Landscape

The rising prevalence of HIV drug resistance (HIVDR) could threaten gains made in combating the HIV epidemic and compromise the 90-90-90 target proposed by United Nations Programme on HIV/AIDS (UNAIDS) to have achieved virological suppression in 90% of all persons receiving antiretroviral therapy (ART) by the year 2020. HIVDR has implications for the persistence of HIV, the selection of current and future ART drug regimens, and strategies of vaccine and cure development. Focusing on drug classes that are in clinical use, this Review critically summarizes what is known about the mechanisms the virus utilizes to escape drug control. Armed with this knowledge, strategies to limit the expansion of HIVDR are proposed.

Discovery of Novel Integrase Inhibitors Acting outside the Active Site Through High-Throughput Screening

Currently, an increasing number of drugs are becoming available to clinics for the treatment of HIV infection. Even if this targeted therapy is highly effective at suppressing viral replication, caregivers are facing growing therapeutic failures in patients, due to resistance with or without treatment adherence concerns. Accordingly, it is important to continue to discover small molecules that have a novel mechanism of inhibition. In this work, HIV integrase inhibitors were selected by high-throughput screening. Chemical structure comparisons enabled the identification of stilbene disulfonic acids as a potential new chemotype. Biochemical characterization of the lead compound stilbenavir (NSC34931) and a few derivatives was performed. Stilbene disulfonic acid derivatives exhibit low to sub-micromolar antiviral activity, and they inhibit integrase through DNA-binding inhibition. They probably bind to the C-terminal domain of integrase, in the cavity normally occupied by the noncleaved strand of the viral DNA substrate. Because of this original mode of action compared to active site strand transfer inhibitors, they do not exhibit cross-resistance to the three main resistance pathways to integrase inhibitors (G140S-Q148H, N155H, and Y143R). Further structure–activity optimization should enable the development of more active and less toxic derivatives with potential clinical relevance.

Recent advances in the discovery of small-molecule inhibitors of HIV-1 integrase

AIDS caused by the infection of HIV is a prevalent problem today. Rapid development of drug resistance to existing drug classes has called for the discovery of new targets. Within the three major enzymes (i.e., HIV-1 protease, HIV-1 reverse transcriptase and HIV-1 integrase [IN]) of the viral replication cycle, HIV-1 IN has been of particular interest due to the absence of human cellular homolog. HIV-1 IN catalyzes the integration of viral genetic material with the host genome, a key step in the viral replication process. Several novel classes of HIV IN inhibitors have been explored by targeting different sites on the enzyme. This review strives to provide readers with updates on the recent developments of HIV-1 IN inhibitors.

AIDS is an epidemic disease that endangers the lives of millions of people across the world. The AIDS virus, also known as HIV, has developed resistance to the majority of available drugs on the market, thus requiring the need for new drugs. HIV integrase is one of the key viral enzymes required for viral cell proliferation. Since there is no similar enzyme in the human body, major emphasis is being made to develop therapeutics for this novel target. The drugs that are at various stages of development for this target are reviewed here.

Advances in rationally designed dual inhibitors of HIV-1 reverse transcriptase and integrase

Reverse transcriptase (RT) and integrase (IN) are two indispensable enzymes in human immunodeficiency virus type 1 (HIV-1) replication. RT is responsible for the transformation of the single-stranded RNA viral genome into double-stranded DNA, and IN catalyzes the integration of viral DNA into the host DNA. Although highly active antiretroviral therapy (HAART) combining nucleoside/nucleotide reverse transcriptase inhibitors (NRTIs/NtRTIs) with nonnucleoside reverse transcriptase inhibitors (NNRTIs) or protease inhibitors (PIs) could suppress successfully HIV viral load and reduce evidently the mortality of HIV infected people, it involves the difficulty of perfect adherence, and other drawbacks such as viral rebound, toxicities and multi-drug resistances. Recently, rational drug design has become a dominant technique for the development of multi-target drugs. And the rationally designed dual inhibitors of HIV-1 RT and IN have become a hot topic of anti-HIV research. In this review, the advances in rationally designed dual inhibitors of HIV-1 RT and IN were summarized, including structurally diverse inhibitors, their structure-activity relationship (SAR) studies as well as binding mode analysis.

The Influenza Virus Polymerase Complex: An Update on Its Structure, Functions, and Significance for Antiviral Drug Design

Influenza viruses cause seasonal epidemics and pandemic outbreaks associated with significant morbidity and mortality, and a huge cost. Since resistance to the existing anti‐influenza drugs is rising, innovative inhibitors with a different mode of action are urgently needed. The influenza polymerase complex is widely recognized as a key drug target, given its critical role in virus replication and high degree of conservation among influenza A (of human or zoonotic origin) and B viruses. We here review the major progress that has been made in recent years in unravelling the structure and functions of this protein complex, enabling structure‐aided drug design toward the core regions of the PA endonuclease, PB1 polymerase, or cap‐binding PB2 subunit. Alternatively, inhibitors may target a protein–protein interaction site, a cellular factor involved in viral RNA synthesis, the viral RNA itself, or the nucleoprotein component of the viral ribonucleoprotein. The latest advances made for these diverse pharmacological targets have yielded agents in advanced (i.e., favipiravir and VX‐787) or early clinical testing, besides several experimental inhibitors in various stages of development, which are all covered here.

Homogeneous High-Throughput Screening Assays for HIV-1 Integrase 3β-Processing and Strand Transfer Activities

HIV-1 integrase (HIV-IN) is a well-validated antiviral drug target catalyzing a multistep reaction to incorporate the HIV-1 provirus into the genome of the host cell. Smallmolecule inhibitors of HIV-1 integrase that specifically target the strand transfer step have demonstrated efficacy in the suppression of virus propagation. However, only fewspecific strand transfer inhibitors have been identified to date, and the need to screen for novel compound scaffolds persists. Here, the authors describe 2 homogeneous time-resolved fluorescent resonance energy transfer-based assays for the measurement of HIV-1 integrase 3'-processing and strand transfer activities. Both assayswere optimized for high-throughput screening formats, and a diverse library containingmore than 1million compoundswas screened in 1536-well plates for HIV-IN strand transfer inhibitors. As a result, compounds were found that selectively affect the enzymatic strand transfer reaction over 3β processing. Moreover, several bioactivemoleculeswere identified that inhibited HIV-1 reporter virus infection in cellularmodel systems. In conclusion, the assays presented herein have proven their utility for the identification ofmechanistically interesting and biologically active inhibitors of HIV-1 integrase that hold potential for further development into potent antiviral drugs.

A targeted DNA substrate mechanism for the inhibition of HIV-1 integrase by inhibitors with antiretroviral activity

We recently reported that viral DNA could be the primary target of raltegravir (RAL), an efficient anti‐HIV‐1 drug, which acts by inhibiting integrase. To elucidate this mechanism, we conducted a comparative analysis of RAL and TB11, a diketoacid abandoned as an anti‐HIV‐1 drug for its weak efficiency and marked toxicity, and tested the effects of the catalytic cofactor Mg²⁺ (5 mm) on drug‐binding properties. We used circular dichroism and fluorescence to determine drug affinities for viral DNA long terminal repeats (LTRs) and peptides derived from the integrase active site and DNA retardation assays to assess drug intercalation into DNA base pairs. We found that RAL bound more tightly to LTR ends than did TB11 (a diketo acid bearing an azido group) and that Mg²⁺ significantly increased the affinity of both RAL and TB11. We also observed a good relationship between drug binding with processed LTR and strand transfer inhibition. This unusual type of inhibition was caused by Mg²⁺‐assisted binding of drugs to DNA substrate, rather than to enzyme. Notably, while RAL bound exclusively to the cleavable/cleaved site, TB11 further intercalated into DNA base pairs and interacted with the integrase‐derived peptides. These unwanted binding sites explain the weaker bioavailability and higher toxicity of TB11 compared with the more effective RAL.

The discovery of allyltyrosine based tripeptides as selective inhibitors of the HIV-1 integrase strand-transfer reaction

From library screening of synthetic antimicrobial peptides, an O-allyltyrosine-based tripeptide was identified to possess inhibitory activity against HIV-1 integrase (IN) exhibiting an IC50 value of 17.5 μM in a combination 3'-processing and strand transfer microtitre plate assay. The tripeptide was subjected to structure-activity relationship (SAR) studies with 28 peptides, incorporating an array of natural and non-natural amino acids. Resulting SAR analysis revealed the allyltyrosine residue was a key feature for IN inhibitory activity whilst incorporation of a lysine residue and extended hydrophilic chains bearing a terminal methyl ester was advantageous. Addition of hydrophobic aromatic moieties to the N-terminal of the scaffold afforded compounds with improved inhibitory activity. Consolidation of these functionalities lead to the development of the tripeptide 96 which specifically inhibited the IN strand-transfer reaction with an IC50 value of 2.5 μM.

Synthesis and bioevaluation of substituted chalcones, coumaranones and other flavonoids as anti-HIV agents

A series of chalcone, flavone, coumaranone and other flavonoid compounds were screened for their anti HIV-1 activity in two cell culture models using TZM-bl and PM1 cells. Within the systems evaluated, the most promising compounds contained either an α- or β-hydroxy-carbonyl motif within their structure (e.g., 8 and 9). Efficacious substituents were identified and used to design new HIV inhibitors with increased potency and lower cytotoxicity. Of the scaffolds evaluated, specific chalcones were found to provide the best balance between anti-HIV potency and low host cell toxicity. Chalcone 8l was shown to inhibit different clinical isolates of HIV in a dose-dependent manner (e.g., IC50 typically⩽5μM). Inhibition of HIV infection experiments using TZM-bl cells demonstrated that chalcone 8l and flavonol 9c had IC50 values of 4.7μM and 10.4μM, respectively. These insights were used to design new chalcones 8o and 8p. Rewardingly, chalcones 8o and 8p (at 10μM) each gave >92% inhibition of viral propagation without impacting PM1 host cell viability. Inhibition of viral propagation significantly increased (60-90%) when PM1 cells were pre-incubated with chalcone 8o, but not with the related flavonol 9c. These results suggested that chalcone 8o may be of value as both a HIV prophylactic and therapy. In summary, O-benzyl-substituted chalcones were identified as promising anti-HIV agents for future investigation.

Comparison of Newly Assembled Full Length HIV-1 Integrase With Prototype Foamy Virus Integrase: Structure-Function Prospective

Background

Drug design against human immunodeficiency virus type 1 (HIV-1) integrase through its mechanistic study is of great interest in the area in biological research. The main obstacle in this area is the absence of the full-length crystal structure for HIV-1 integrase to be used as a model. A complete structure, similar to HIV-1 of a prototype foamy virus integrase in complex with DNA, including all conservative residues, is available and has been extensively used in recent investigations.

Objectives

The aim of this study was to determine whether the above model is precisely representative of HIV-1 integrase. This would critically determine the success of any designed drug using the model in deactivation of integrase and AIDS treatment.

Materials and Methods

Primarily, a new structure for HIV-1 was constructed, using a crystal structure of prototype foamy virus as the starting structure. The constructed structure of HIV-1 integrase was simultaneously simulated with a prototype foamy virus integrase on a separate occasion.

Results

Our results indicate that the HIV-1 system behaves differently from the prototype foamy virus in terms of folding, hydration, hydrophobicity of binding site and stability.

Conclusions

Based on our findings, we can conclude that HIV-1 integrase is vastly different from the prototype foamy virus integrase and does not resemble it, and the modeling output of the prototype foamy virus simulations could not be simply generalized to HIV-1 integrase. Therefore, our HIV-1 model seems to be more representative and more useful for future research.

Integrase Inhibitor Prodrugs: Approaches to Enhancing the Anti-HIV Activity of β-Diketo Acids

HIV integrase, encoded at the 3'-end of the HIV pol gene, is essential for HIV replication. This enzyme catalyzes the incorporation of HIV DNA into human DNA, which represents the point of "no-return" in HIV infection. Integrase is a significant target in anti-HIV drug discovery. This review article focuses largely on the design of integrase inhibitors that are β-diketo acids constructed on pyridinone scaffolds. Methodologies for synthesis of these compounds are discussed. Integrase inhibition data for the strand transfer (ST) step are compared with in vitro anti-HIV data. The review also examines the issue of the lack of correlation between the ST enzymology data and anti-HIV assay results. Because this disconnect appeared to be a problem associated with permeability, prodrugs of these inhibitors were designed and synthesized. Prodrugs dramatically improved the anti-HIV activity data. For example, for compound, 96, the anti-HIV activity (EC50) improved from 500 nM for this diketo acid to 9 nM for its prodrug 116. In addition, there was excellent correlation between the IC50 and IC90 ST enzymology data for 96 (6 nM and 97 nM, respectively) and the EC50 and EC90 anti-HIV data for its prodrug 116 (9 nM and 94 nM, respectively). Finally, it was confirmed that the prodrug 116 was rapidly hydrolyzed in cells to the active compound 96.

An integrated biological approach to guide the development of metal-chelating inhibitors of influenza virus PA endonuclease

The influenza virus PA endonuclease, which cleaves capped cellular pre-mRNAs to prime viral mRNA synthesis, is a promising target for novel anti-influenza virus therapeutics. The catalytic center of this enzyme resides in the N-terminal part of PA (PA-Nter) and contains two (or possibly one or three) Mg(2+) or Mn(2+) ions, which are critical for its catalytic function. There is great interest in PA inhibitors that are optimally designed to occupy the active site and chelate the metal ions. We focused here on a series of β-diketo acid (DKA) and DKA-bioisosteric compounds containing different scaffolds, and determined their structure-activity relationship in an enzymatic assay with PA-Nter, in order to build a three-dimensional pharmacophore model. In addition, we developed a molecular beacon (MB)-based PA-Nter assay that enabled us to compare the inhibition of Mn(2+) versus Mg(2+), the latter probably being the biologically relevant cofactor. This real-time MB assay allowed us to measure the enzyme kinetics of PA-Nter or perform high-throughput screening. Several DKA derivatives were found to cause strong inhibition of PA-Nter, with IC50 values comparable to that of the prototype L-742,001 (i.e., below 2 μM). Among the different compounds tested, L-742,001 appeared unique in having equal activity against either Mg(2+) or Mn(2+). Three compounds ( 10: , with a pyrrole scaffold, and 40: and 41: , with an indole scaffold) exhibited moderate antiviral activity in cell culture (EC99 values 64-95 μM) and were proven to affect viral RNA synthesis. Our approach of integrating complementary enzymatic, cellular, and mechanistic assays should guide ongoing development of improved influenza virus PA inhibitors.

Development of a receptor model for efficient in silico screening of HIV-1 integrase inhibitors

Integrase (IN) is a key viral enzyme for the replication of the type-1 human immunodeficiency virus (HIV-1), and as such constitutes a relevant therapeutic target for the development of anti-HIV agents. However, the lack of crystallographic data of HIV IN complexed with the corresponding viral DNA has historically hindered the application of modern structure-based drug design techniques to the discovery of new potent IN inhibitors (INIs). Consequently, the development and validation of reliable HIV IN structural models that may be useful for the screening of large databases of chemical compounds is of particular interest. In this study, four HIV-1 IN homology models were evaluated respect to their capability to predict the inhibition potency of a training set comprising 36 previously reported INIs with IC50 values in the low nanomolar to the high micromolar range. Also, 9 inactive structurally related compounds were included in this training set. In addition, a crystallographic structure of the IN-DNA complex corresponding to the prototype foamy virus (PFV) was also evaluated as structural model for the screening of inhibitors. The applicability of high throughput screening techniques, such as blind and ligand-guided exhaustive rigid docking was assessed. The receptor models were also refined by molecular dynamics and clustering techniques to assess protein sidechain flexibility and solvent effect on inhibitor binding. Among the studied models, we conclude that the one derived from the X-ray structure of the PFV integrase exhibited the best performance to rank the potencies of the compounds in the training set, with the predictive power being further improved by explicitly modeling five water molecules within the catalytic side of IN. Also, accounting for protein sidechain flexibility enhanced the prediction of inhibition potencies among the studied compounds. Finally, an interaction fingerprint pattern was established for the fast identification of potent IN inhibitors. In conclusion, we report an exhaustively validated receptor model if IN that is useful for the efficient screening of large chemical compounds databases in the search of potent HIV-1 IN inhibitors.

Inhibiting the HIV integration process: past, present, and the future

HIV integrase (IN) catalyzes the insertion into the genome of the infected human cell of viral DNA produced by the retrotranscription process. The discovery of raltegravir validated the existence of the IN, which is a new target in the field of anti-HIV drug research. The mechanism of catalysis of IN is depicted, and the characteristics of the inhibitors of the catalytic site of this viral enzyme are reported. The role played by the resistance is elucidated, as well as the possibility of bypassing this problem. New approaches to block the integration process are depicted as future perspectives, such as development of allosteric IN inhibitors, dual inhibitors targeting both IN and other enzymes, inhibitors of enzymes that activate IN, activators of IN activity, as well as a gene therapy approach.

Dual mechanism of HIV-1 integrase and RNase H inhibition by diketo derivatives – a computational study

Dual inhibition of HIV-1 integrase and RNase H by the diketo derivatives is investigated through ligand and structure based computational methods.

Docking-based CoMFA and CoMSIA study of azaindole carboxylic acid derivatives as promising HIV-1 integrase inhibitors

Three-dimensional quantitative structure-activity relationship (3D-QSAR) studies were performed based on a series of azaindole carboxylic acid derivatives that had previously been reported as promising HIV-1 integrase inhibitors. Docking studies to explore the binding mode were performed based on the highly active molecule 36. The best docked conformation of molecule 36 was used as template for alignment. The comparative molecular field analysis (CoMFA) model (including steric and electrostatic fields) yielded the cross validation q (2) = 0.655, non-cross validation r (2) = 0.989 and predictive r (2) pred = 0.979. The best comparative molecular similarity indices analysis (CoMSIA) model (including steric, electrostatic, hydrophobic and hydrogen-bond acceptor fields) yielded the cross validation q (2) = 0.719, non-cross validation r (2) = 0.992 and predictive r (2) pred = 0.953. A series of new azaindole carboxylic acid derivatives were designed and the HIV-1 integrase inhibitory activities of these designed compounds were predicted based on the CoMFA and CoMSIA models.

Computational design of a full-length model of HIV-1 integrase: modeling of new inhibitors and comparison of their calculated binding energies with those previously studied

A full-length model of integrase (IN) of the human immunodeficiency virus type 1 (HIV-1) was constructed based on the distinctly resolved X-ray crystal structures of its three domains, named N-terminal, catalytic core and C-terminal. Thirty-one already known inhibitors with varieties of structural differences as well as nine newly tested ones were docked into the catalytic core. The molecular dynamic (MD) and binding properties of these complexes were obtained by MD calculations. The binding energies calculated by molecular mechanic/Poisson Boltzmann solvation area were significantly correlationed with available IC50. Four inhibitors including two newly designed were also docked into the full-length model and their MD behaviors and binding properties were calculated. It was found that one of the newly designed compounds forms a better complex with HIV-1 IN compared to the rest including raltegravir. MD calculations were performed with AMBER suite of programs using ff99SB force field for the proteins and the general Amber force field for the ligands. In conclusion, the results have produced a promising standpoint not only in the construction of the full-length model but also in development of new drugs against it. However, the role of multimer formation and the involvement of DNAs, and their subsequent effect on the complexation and inhibition, are required to arrive at a conclusive decision.

Mutational analysis of the binding pockets of the diketo acid inhibitor L-742,001 in the influenza virus PA endonuclease

The influenza virus PA endonuclease, which cleaves capped host pre-mRNAs to initiate synthesis of viral mRNA, is a prime target for antiviral therapy. The diketo acid compound L-742,001 was previously identified as a potent inhibitor of the influenza virus endonuclease reaction, but information on its precise binding mode to PA or potential resistance profile is limited. Computer-assisted docking of L-742,001 into the crystal structure of inhibitor-free N-terminal PA (PA-Nter) indicated a binding orientation distinct from that seen in a recent crystallographic study with L-742,001-bound PA-Nter (R. M. DuBois et al., PLoS Pathog. 8:e1002830, 2012). A comprehensive mutational analysis was performed to determine which amino acid changes within the catalytic center of PA or its surrounding hydrophobic pockets alter the antiviral sensitivity to L-742,001 in cell culture. Marked (up to 20-fold) resistance to L-742,001 was observed for the H41A, I120T, and G81F/V/T mutant forms of PA. Two- to 3-fold resistance was seen for the T20A, L42T, and V122T mutants, and the R124Q and Y130A mutants were 3-fold more sensitive to L-742,001. Several mutations situated at noncatalytic sites in PA had no or only marginal impact on the enzymatic functionality of viral ribonucleoprotein complexes reconstituted in cell culture, consistent with the less conserved nature of these PA residues. Our data provide relevant insights into the binding mode of L-742,001 in the PA endonuclease active site. In addition, we predict some potential resistance sites that should be taken into account during optimization of PA endonuclease inhibitors toward tight binding in any of the hydrophobic pockets surrounding the catalytic center of the enzyme.

Substrate recognition and motion mode analyses of PFV integrase in complex with viral DNA via coarse-grained models

HIV-1 integrase (IN) is an important target in the development of drugs against the AIDS virus. Drug design based on the structure of IN was markedly hampered due to the lack of three-dimensional structure information of HIV-1 IN-viral DNA complex. The prototype foamy virus (PFV) IN has a highly functional and structural homology with HIV-1 IN. Recently, the X-ray crystal complex structure of PFV IN with its cognate viral DNA has been obtained. In this study, both Gaussian network model (GNM) and anisotropy network model (ANM) have been applied to comparatively investigate the motion modes of PFV DNA-free and DNA-bound IN. The results show that the motion mode of PFV IN has only a slight change after binding with DNA. The motion of this enzyme is in favor of association with DNA, and the binding ability is determined by its intrinsic structural topology. Molecular docking experiments were performed to gain the binding modes of a series of diketo acid (DKA) inhibitors with PFV IN obtained from ANM, from which the dependability of PFV IN-DNA used in the drug screen for strand transfer (ST) inhibitors was confirmed. It is also found that the functional groups of keto-enol, bis-diketo, tetrazole and azido play a key role in aiding the recognition of viral DNA, and thus finally increase the inhibition capability for the corresponding DKA inhibitor. Our study provides some theoretical information and helps to design anti-AIDS drug based on the structure of IN.

The future of integrase inhibitors of HIV-1

Integration of the HIV-1 DNA is required and essential to maintain the viral DNA in the infected cell. Integration process occurs in several events, mainly endonucleolytic processing of the 3' ends of the viral DNA and strand transfer or joining of the viral and cellular DNA. The design and discovery of integrase inhibitors were first focused at targeting the catalytic site of IN with a specific effect on strand transfer. Several integrase inhibitors were developed clinically, two first generation inhibitors, raltegravir and elvitegravir and then two second-generation inhibitors, dolutegravir and MK-2058. Recently, allosteric integrase inhibitors intended to interfere with the integrase-LEDGF/p75 interaction have been designed. These new inhibitors called LEDGINs have an effect on 3' processing and strand transfer. Thus, integrase inhibitors present a real added value in combined treatment for naive and experienced HIV infected patients. Combination experiments of LEDGINs and raltegravir suggest that these inhibitors could act additively despite sharing the same viral target. Future therapy could involve combinations of inhibitors of IN function acting though different binding pockets within IN. The place of this class on HIV inhibitors and their future role in perspective of novel therapies to eliminate latent HIV reservoirs and infection for cure should also be explored.

DOCKING OF RALTEGRAVIR TO HIV-1 INTEGRASE STRUCTURE ENSEMBLE

Docking of the drug raltegravir to HIV-1 integrase (IN) was performed based on the established Relaxed Complex Scheme (RCS) method which accounts for the flexibility of both receptor and ligand in molecular docking. Two representative butterfly-like structures of raltegravir were identified and both of them mimicked the binding mode of 5CITEP with similar ligand-receptor interactions. Furthermore, the results that raltegravir interacted with magnesium by intermediate water molecules indicate the importance of water molecules at the binding site which has always been ignored in the docking studies of IN inhibitors. Taking these water molecules into consideration gives more insight into the design and development of the second generation IN inhibitors.

Authentic HIV-1 integrase inhibitors

HIV-1 integrase (IN) is indispensable for HIV-1 replication and has become a validated target for developing anti-AIDS agents. In two decades of development of IN inhibition-based anti-HIV therapeutics, a significant number of compounds were identified as IN inhibitors, but only some of them showed antiviral activity. This article reviews a number of patented HIV-1 IN inhibitors, especially those that possess high selectivity for the strand transfer reaction. These compounds generally have a polar coplanar moiety, which is assumed to chelate two magnesium ions in the binding site. Resistance to those compounds, when given to patients, can develop as a result of IN mutations. We refer to those compounds as authentic IN inhibitors. Continued drug development has so far delivered one authentic IN inhibitor to the market (raltegravir in 2007). Current and future attention will be focused on the development of novel authentic IN inhibitors with the goal of overcoming viral resistance.

Binding modes of diketo-acid inhibitors of HIV-1 integrase: a comparative molecular dynamics simulation study

HIV-1 integrase (IN) has become an attractive target since drug resistance against HIV-1 reverse transcriptase (RT) and protease (PR) has appeared. Diketo acid (DKA) inhibitors are potent and selective inhibitors of HIV-1 IN: however the action mechanism is not well understood. Here, to study the inhibition mechanism of DKAs we performed 10 ns comparative molecular dynamics simulations on HIV-1 IN bound with three most representative DKA inhibitors: Shionogi inhibitor, S-1360 and two Merck inhibitors L-731,988 and L-708,906. Our simulations show that the acidic part of S-1360 formed salt bridge and cation-π interactions with Lys159. In addition, the catalytic Glu152 in S-1360 was pushed away from the active site to form an ion-pair interaction with Arg199. The Merck inhibitors can maintain either one or both of these ion-pair interaction features. The difference in potencies of the DKA inhibitors is thus attributed to the different binding modes at the catalytic site. Such structural information at atomic level, not only demonstrates the action modes of DKA inhibitors but also provides a novel starting point for structural-based design of HIV-1 IN inhibitors.

Development of tricyclic hydroxy-1H-pyrrolopyridine-trione containing HIV-1 integrase inhibitors

New tricyclic HIV-1 integrase (IN) inhibitors were prepared that combined structural features of bicyclic pyrimidinones with recently disclosed 4,5-dihydroxy-1H-isoindole-1,3(2H)-diones. This combination resulted in the introduction of a nitrogen into the aryl ring and the addition of a fused third ring to our previously described inhibitors. The resulting analogues showed low micromolar inhibitory potency in in vitro HIV-1 integrase assays, with good selectivity for strand transfer relative to 3'-processing.

S/GSK1349572, a new integrase inhibitor for the treatment of HIV: promises and challenges

INTRODUCTION

The recent introduction of integrase inhibitors (INIs) into the HIV treatment armentarium has had a significant impact on HIV treatment. However, at present, raltegravir twice daily is the only licensed INI featuring a lower genetic barrier compared with boosted protease inhibitors. S/GSK1349572 represents a new INI in current development. It is a once-daily, unboosted INI with low pharmacokinetic variability and predictable exposure-response relationship. Phase IIb studies in antiretroviral-naïve patients have demonstrated non-inferiority to efavirenz-based HIV therapy. Phase II studies in INI-experienced patients show partially retained activity in vivo. Overall, the safety profile of S/GSK1349572 in all studies completed has been very favorable.

AREAS COVERED

A Pubmed and Medline search was carried out on all articles on S/GSK1349572 from 2005 to 2010, including recent abstract presentations from major HIV conferences (CROI 2010, WAC2010, EACS2009, HIV10 and ICAAC2010). The reader will become acquainted with the unique properties of this new INI and will understand the current promises and challenges of the data available from S/GSK1349572.

EXPERT OPINION

S/GSK1349572 represents a new, unboosted, once-daily INI in development with distinct pharmacokinetics and resistance profile, which has showed promising potency and tolerability in the first clinical studies.

Tautomerism and magnesium chelation of HIV-1 integrase inhibitors: a theoretical study

The tautomerism and corresponding transition states of four authentic HIV-1 integrase (IN) inhibitor prototype structures, alpha,gamma-diketo acid, alpha,gamma-diketotriazole, dihydroxypyrimidine carboxamide and 4-quinolone-3-carboxylic acid, were investigated at the B3LYP/6-311++G(d,p) level in vacuum and in aqueous solvent models. To study the possible chelating modes of these tautomers with two magnesium ions--a process important for inhibition--we modeled an assembly of three formic acids, four water molecules and two Mg(2+) ions as a template mimicking the binding site of IN. The DFT calculation results show that deprotonated enolized or phenolic hydroxy groups of specific tautomers in water lead to the most stable complexes, with the two magnesium ions separated by a distance of approximately 3.70 to 3.74 A, and with each magnesium ion at the center of an octahedron. The drug candidate GS-9137 (Gilead), based on the 4-quinolone-3-carboxylic acid scaffold, and its analogues form similar but different chelating modes. When one water molecule in the complex is replaced by a methanol molecule, which mimics the terminal 3'-OH of viral DNA, a good chelating complex is retained. This supports the hypothesis that, in the binding site of IN after 3'-processing, the terminal 3'-OH of viral DNA interacts with one Mg(2+) by chelation.

HIV-1 subtype B and C integrase enzymes exhibit differential patterns of resistance to integrase inhibitors in biochemical assays

BACKGROUND

Because of high intersubtype HIV-1 genetic variability, it has been shown that subtype-specific patterns of resistance to antiretroviral drugs exist. We wished to ascertain whether this might be true for integrase inhibitors.

METHODS

We compared the susceptibility of subtype B and C HIV-1 integrase enzymes, harboring the previously reported resistance mutations E92Q, N155H, and E92Q/N155H, to clinically relevant integrase inhibitors. This was performed biochemically using a microtiter plate system.

RESULTS

Subtype C integrase enzymes bearing the resistance mutations E92Q/N155H were approximately 10-fold more susceptible to each of two integrase inhibitors, raltegravir and elvitegravir, than were subtype B recombinant integrase containing the same mutations.

CONCLUSION

Polymorphic differences within the subtype B and C integrase genes likely cause variations in the contribution of N155H alone or in combination with E92Q to drug resistance. It is possible that different viral subtypes may favor different mutational pathways, potentially leading to varying levels of drug resistance among different subtypes.

Drug-class specific impact of antivirals on the reproductive capacity of HIV

Predictive markers linking drug efficacy to clinical outcome are a key component in the drug discovery and development process. In HIV infection, two different measures, viral load decay and phenotypic assays, are used to assess drug efficacy in vivo and in vitro. For the newly introduced class of integrase inhibitors, a huge discrepancy between these two measures of efficacy was observed. Hence, a thorough understanding of the relation between these two measures of drug efficacy is imperative for guiding future drug discovery and development activities in HIV. In this article, we developed a novel viral dynamics model, which allows for a mechanistic integration of the mode of action of all approved drugs and drugs in late clinical trials. Subsequently, we established a link between in vivo and in vitro measures of drug efficacy, and extract important determinants of drug efficacy in vivo. The analysis is based on a new quantity-the reproductive capacity-that represents in mathematical terms the in vivo analog of the read-out of a phenotypic assay. Our results suggest a drug-class specific impact of antivirals on the total amount of viral replication. Moreover, we showed that the (drug-)target half life, dominated by immune-system related clearance processes, is a key characteristic that affects both the emergence of resistance as well as the in vitro-in vivo correlation of efficacy measures in HIV treatment. We found that protease- and maturation inhibitors, due to their target half-life, decrease the total amount of viral replication and the emergence of resistance most efficiently.

A cooperative and specific DNA-binding mode of HIV-1 integrase depends on the nature of the metallic cofactor and involves the zinc-containing N-terminal domain

HIV-1 integrase catalyzes the insertion of the viral genome into chromosomal DNA. We characterized the structural determinants of the 3′-processing reaction specificity—the first reaction of the integration process—at the DNA-binding level. We found that the integrase N-terminal domain, containing a pseudo zinc-finger motif, plays a key role, at least indirectly, in the formation of specific integrase–DNA contacts. This motif mediates a cooperative DNA binding of integrase that occurs only with the cognate/viral DNA sequence and the physiologically relevant Mg²⁺ cofactor. The DNA-binding was essentially non-cooperative with Mn²⁺ or using non-specific/random sequences, regardless of the metallic cofactor. 2,2′-Dithiobisbenzamide-1 induced zinc ejection from integrase by covalently targeting the zinc-finger motif, and significantly decreased the Hill coefficient of the Mg²⁺-mediated integrase–DNA interaction, without affecting the overall affinity. Concomitantly, 2,2′-dithiobisbenzamide-1 severely impaired 3′-processing (IC₅₀ = 11–15 nM), suggesting that zinc ejection primarily perturbs the nature of the active integrase oligomer. A less specific and weaker catalytic effect of 2,2′-dithiobisbenzamide-1 is mediated by Cys 56 in the catalytic core and, notably, accounts for the weaker inhibition of the non-cooperative Mn²⁺-dependent 3′-processing. Our data show that the cooperative DNA-binding mode is strongly related to the sequence-specific DNA-binding, and depends on the simultaneous presence of the Mg²⁺ cofactor and the zinc effector.

Development of a high-throughput assay for the HIV-1 integrase disintegration reaction

Both HIV-1 integrase (IN) and the central catalytic domain of IN (IN-CCD) catalyze the disintegration reaction in vitro. In this study, IN and IN-CCD proteins were expressed and purified, and a high-throughput format enzyme-linked immunosorbent assay (ELISA) was developed for the disintegration reaction. IN exhibited a marked preference for Mn(2+) over Mg(2+) as the divalent cation cofactor in disintegration. Baicalein, a known IN inhibitor, was found to be an IN-CCD inhibitor. The assay is sensitive and specific for the study of disintegration reaction as well as for the in vitro identification of antiviral drugs targeting IN, especially targeting IN-CCD.

HIV-1 IN inhibitors: 2010 update and perspectives

Integrase (IN) is the newest validated target against AIDS and retroviral infections. The remarkable activity of raltegravir (Isentress((R))) led to its rapid approval by the FDA in 2007 as the first IN inhibitor. Several other IN strand transfer inhibitors (STIs) are in development with the primary goal to overcome resistance due to the rapid occurrence of IN mutations in raltegravir-treated patients. Thus, many scientists and drug companies are actively pursuing clinically useful IN inhibitors. The objective of this review is to provide an update on the IN inhibitors reported in the last two years, including second generation STI, recently developed hydroxylated aromatics, natural products, peptide, antibody and oligonucleotide inhibitors. Additionally, the targeting of IN cofactors such as LEDGF and Vpr will be discussed as novel strategies for the treatment of AIDS.

Induced-fit docking approach provides insight into the binding mode and mechanism of action of HIV-1 integrase inhibitors

A three-dimensional model of a complex between HIV-1 integrase (IN), viral DNA, and metal ions that we recently built was used as a target for a docking method (induced-fit docking, IFD) that accurately predicts ligand binding modes and concomitant structural changes in the receptor. Six different well-known integrase strand transfer inhibitors (INSTIs): L-708,906, L-731,988, S-1360, L-870,810, raltegravir, and elvitegravir were thus used as ligands for our docking simulations. The obtained IFD results are consistent with the mechanism of action proposed for this class of IN inhibitors, that is, metal chelating/binding agents. This study affords new insight into the possible mechanism of inhibition and binding conformations for INSTIs. The impact on our hypothesis of specific mutations associated with IN inhibitor resistance was also evaluated. All these findings might have implications for integrase-directed HIV-1 drug discovery efforts.

Integration of human immunodeficiency virus as a target for antiretroviral therapy

PURPOSE OF REVIEW

Most of the studies investigating inhibition of human immunodeficiency virus integration have focused on blocking the enzymatic functions of HIV integrase, with the predominant judgment that integration inhibitors need to block at least one of the integrase-catalyzed reactions. Recent studies, however, have highlighted the importance of other proteins and their contacts with integrase in the preintegration complex, and their involvement in chromosomal integration of the viral DNA.

RECENT FINDINGS

Promising results of clinical trials for two new integrase inhibitors were announced recently, providing the proof of the concept for using HIV-1 integrase inhibitors as antiretroviral therapy. Two strategies are currently employed for the development of novel inhibitors of HIV integrase: synthesis of hybrid molecules comprising core structures of two or more known inhibitors, and three-dimensional pharmacophore searches based on previously discovered compounds. By highlighting the role of the cellular cofactor LEDGF/p75 in HIV integration, novel approaches are indicated that aim to develop compounds altering contact between HIV integrase and integration cofactors.

SUMMARY

By the discovery of novel inhibitors and targets for HIV integration, coupled with recent studies in characterizing preintegration complex formation, new insight is provided for the rational design of anti-HIV integration inhibitors.

HIV-1 integrase and virus and cell DNAs: complex formation and perturbation by inhibitors of integration

HIV-1 integrase (IN) catalyzes integration of viral DNA into cell DNA through 3'-processing of viral DNA and strand transfer reactions. To learn on binding of IN to DNAs and IN inhibition we applied spectroscopy (circular dichroism, fluorescence) in a simplified model consisting in a peptide analogue (K156) of alpha4 helix involved in recognition of viral and cell DNA; an oligonucleotide corresponding to the U5' LTR DNA end; and an inhibitor (TB11) of the diketo acid (DKA) family. Results extrapolated to IN show that: the enzyme binds viral DNA with high affinity and specificity, but cell DNA with low affinity and specificity; the affinity of TB11 for IN is high enough to impair the binding of IN to cell DNA, but not to viral DNA. This explains why TB11 is an inhibitor of strand transfer but not of 3'-processing. These results can help in the search of new IN inhibitors.

Strand transfer inhibitors of HIV-1 integrase: bringing IN a new era of antiretroviral therapy

HIV-1 integrase (IN) is one of three essential enzymes (along with reverse transcriptase and protease) encoded by the viral pol gene. IN mediates two critical reactions during viral replication; firstly 3'-end processing (3'EP) of the double-stranded viral DNA ends and then strand transfer (STF) which joins the viral DNA to the host chromosomal DNA forming a functional integrated proviral DNA. IN is a 288 amino acid protein containing three functional domains, the N-terminal domain (NTD), catalytic core domain (CCD) and the C-terminal domain (CTD). The CCD contains three conserved catalytic residues, Asp64, Asp116 and Glu152, which coordinate divalent metal ions essential for the STF reaction. Intensive research over the last two decades has led to the discovery and development of small molecule inhibitors of the IN STF reaction (INSTIs). INSTIs are catalytic inhibitors of IN, and act to chelate the divalent metal ions in the CCD. One INSTI, raltegravir (RAL, Merck Inc.) was approved in late 2007 for the treatment of HIV-1 infection in patients with prior antiretroviral (ARV) treatment experience and was recently approved also for first line therapy. A second INSTI, elvitegravir (EVG, Gilead Sciences, Inc.) is currently undergoing phase 3 studies in ARV treatment-experienced patients and phase 2 studies in ARV naïve patients as part of a novel fixed dose combination. Several additional INSTIs are in early stage clinical development. This review will discuss the discovery and development of this novel class of antiretrovirals. This article forms part of a special issue of Antiviral Research marking the 25th anniversary of antiretroviral drug discovery and development, Vol 85, issue 1, 2010.

Biochemical and virological analysis of the 18-residue C-terminal tail of HIV-1 integrase

BACKGROUND

The 18 residue tail abutting the SH3 fold that comprises the heart of the C-terminal domain is the only part of HIV-1 integrase yet to be visualized by structural biology. To ascertain the role of the tail region in integrase function and HIV-1 replication, a set of deletion mutants that successively lacked three amino acids was constructed and analyzed in a variety of biochemical and virus infection assays. HIV-1/2 chimers, which harbored the analogous 23-mer HIV-2 tail in place of the HIV-1 sequence, were also studied. Because integrase mutations can affect steps in the replication cycle other than integration, defective mutant viruses were tested for integrase protein content and reverse transcription in addition to integration. The F185K core domain mutation, which increases integrase protein solubility, was furthermore analyzed in a subset of mutants.

RESULTS

Purified proteins were assessed for in vitro levels of 3' processing and DNA strand transfer activities whereas HIV-1 infectivity was measured using luciferase reporter viruses. Deletions lacking up to 9 amino acids (1-285, 1-282, and 1-279) displayed near wild-type activities in vitro and during infection. Further deletion yielded two viruses, HIV-1(1-276) and HIV-1(1-273), that displayed approximately two and 5-fold infectivity defects, respectively, due to reduced integrase function. Deletion mutant HIV-1(1-270) and the HIV-1/2 chimera were non-infectious and displayed approximately 3 to 4-fold reverse transcription in addition to severe integration defects. Removal of four additional residues, which encompassed the C-terminal beta strand of the SH3 fold, further compromised integrase incorporation into virions and reverse transcription.

CONCLUSION

HIV-1(1-270), HIV-1(1-266), and the HIV-1/2 chimera were typed as class II mutant viruses due to their pleiotropic replication defects. We speculate that residues 271-273 might play a role in mediating the known integrase-reverse transcriptase interaction, as their removal unveiled a reverse transcription defect. The F185K mutation reduced the in vitro activities of 1-279 and 1-276 integrases by about 25%. Mutant proteins 1-279/F185K and 1-276/F185K are therefore highlighted as potential structural biology candidates, whereas further deleted tail variants (1-273/F185K or 1-270/F185K) are less desirable due to marginal or undetectable levels of integrase function.