Trace CO2 capture by an ultramicroporous physisorbent with low water affinity

Extended MOF-74-Type Variant with an Azine Linkage: Efficient Direct Air Capture and One-Pot Synthesis

Direct air capture (DAC) shows considerable promise for the effective removal of CO2; however, materials applicable to DAC are lacking. Among metal-organic framework (MOF) adsorbents, diamine-Mg2(dobpdc) (dobpdc4- = 4,4-dioxidobiphenyl-3,3'-dicarboxylate) effectively removes low-pressure CO2, but the synthesis of the organic ligand requires high temperature, high pressure, and a toxic solvent. Besides, it is necessary to isolate the ligand for utilization in the synthesis of the framework. In this study, we synthesized a new variant of extended MOF-74-type frameworks, M2(hob) (M = Mg2+, Co2+, Ni2+, and Zn2+; hob4- = 5,5'-(hydrazine-1,2-diylidenebis(methanylylidene))bis(2-oxidobenzoate)), constructed from an azine-bonded organic ligand obtained through a facile condensation reaction at room temperature. Functionalization of Mg2(hob) with N-methylethylenediamine, N-ethylethylenediamine, and N,N'-dimethylethylenediamine (mmen) enables strong interactions with low-pressure CO2, resulting in top-tier adsorption capacities of 2.60, 2.49, and 2.91 mmol g-1 at 400 ppm of CO2, respectively. Under humid conditions, the CO2 capacity was higher than under dry conditions due to the presence of water molecules that aid in the formation of bicarbonate species. A composite material combining mmen-Mg2(hob) and polyvinylidene fluoride, a hydrophobic polymer, retained its excellent adsorption performance even after 7 days of exposure to 40% relative humidity. In addition, the one-pot synthesis of Mg2(hob) from a mixture of the corresponding monomers is achieved without separate ligand synthesis steps; thus, this framework is suitable for facile large-scale production. This work underscores that the newly synthesized Mg2(hob) and its composites demonstrate significant potential for DAC applications.

Physicochemical Properties, Equilibrium Adsorption Performance, Manufacturability, and Stability of TIFSIX-3-Ni for Direct Air Capture of CO2

The use of adsorbents for direct air capture (DAC) of CO2 is regarded as a promising and essential carbon dioxide removal technology to help meet the goals outlined by the 2015 Paris Agreement. A class of adsorbents that has gained significant attention for this application is ultramicroporous metal organic frameworks (MOFs). However, the necessary data needed to facilitate process scale evaluation of these materials is not currently available. Here, we investigate TIFSIX-3-Ni, a previously reported ultramicroporous MOF for DAC, and measure several physicochemical and equilibrium adsorption properties. We report its crystal structure, textural properties, thermal stability, specific heat capacity, CO2, N2, and H2O equilibrium adsorption isotherms at multiple temperatures, and Ar and O2 isotherms at a single temperature. For CO2, N2, and H2O, we also report isotherm model fitting parameters and calculate heats of adsorption. We assess the manufacturability and process stability of TIFSIX-3-Ni by investigating the impact of batch reproducibility, binderless pelletization, humidity, and adsorption-desorption cycling (50 cycles) on its crystal structure, textural properties, and CO2 adsorption. For pelletized TIFSIX-3-Ni, we also report its skeletal, pellet, and bed density, total pore volume, and pellet porosity. Overall, our data enable initial process modeling and optimization studies to evaluate TIFSIX-3-Ni for DAC at the process scale. They also highlight the possibility to pelletize TIFSIX-3-Ni and the limited stability of the MOF under humid and oxidative conditions as well as upon multiple adsorption-desorption cycles.

A Scalable Robust Microporous Al-MOF for Post-Combustion Carbon Capture

Herein, a robust microporous aluminum tetracarboxylate framework, MIL-120(Al)-AP, (MIL, AP: Institute Lavoisier and Ambient Pressure synthesis, respectively) is reported, which exhibits high CO2 uptake (1.9 mmol g-1 at 0.1 bar, 298 K). In situ Synchrotron X-ray diffraction measurements together with Monte Carlo simulations reveal that this structure offers a favorable CO2 capture configuration with the pores being decorated with a high density of µ2-OH groups and accessible aromatic rings. Meanwhile, based on calculations and experimental evidence, moderate host-guest interactions Qst (CO2) value of MIL-120(Al)-AP (-40 kJ mol-1) is deduced, suggesting a relatively low energy penalty for full regeneration. Moreover, an environmentally friendly ambient pressure green route, relying on inexpensive raw materials, is developed to prepare MIL-120(Al)-AP at the kilogram scale with a high yield while the Metal- Organic Framework (MOF) is further shaped with inorganic binders as millimeter-sized mechanically stable beads. First evidences of its efficient CO2/N2 separation ability are validated by breakthrough experiments while operando IR experiments indicate a kinetically favorable CO2 adsorption over water. Finally, a techno-economic analysis gives an estimated production cost of ≈ 13 $ kg-1, significantly lower than for other benchmark MOFs. These advancements make MIL-120(Al)-AP an excellent candidate as an adsorbent for industrial-scale CO2 capture processes.

A Microporous Mn(II) MOF Based on 5-(4H-1,2,4-triazol-4-yl) Isophthalic Acid for CO2/N2 Separation

Removal of carbon dioxide (CO2) from a CO2/N2 mixture by utilizing CO2-selective sorbents is important from the perspective of energy security and environmental sustainability. Herein, a microporous metal-organic framework (MOF) composed of manganese(II) and a bifunctional linker 5-(4H-1,2,4-triazol-4-yl)benzene-1,3-dicarboxylic acid (H2L), [Mn(HL)2] (1) is designed and synthesized using a hydrothermal method. Characterized by single-crystal X-ray diffraction (SCXRD), a microporous channel was found in the structure of compound 1 along the a-axis. Attributed to hydrogen-binding interactions between CO2 molecules and N- and O-donor ligands in its microporous one-dimensional (1D) channel, compound 1 exhibits favorable adsorption of CO2 over N2. Further, verified by experimental breakthrough tests, the CO2/N2 mixture can be separated efficiently. This work provides potential guidance for designing CO2-selective MOFs for CO2/N2 separation.

Microporous Fluorinated MOF with Multiple Adsorption Sites for Efficient Recovery of C2H6 and C3H8 from Natural Gas

Purifying C2H6/C3H8 from a ternary natural gas mixture through adsorption separation is an important but challenging process in the petrochemical industry. To address this challenge, the industry is exploring effective strategies for designing high-performance adsorbents. In this study, we present two metal-organic frameworks (MOFs), DMOF-TF and DMOF-(CF3)2, which have fluorinated pores obtained by substituting linker ligands in the host material. This pore engineering strategy not only provides suitable pore confinement but also enhances the adsorption capacities for C2H6/C3H8 by providing additional binding sites. Theoretical calculations and transient breakthrough experiments show that the introduction of F atoms not only improves the efficiency of natural gas separation but also provides multiple adsorption sites for C2H6/C3H8-framework interactions.

Water-stable metal-organic frameworks (MOFs): rational construction and carbon dioxide capture

Metal-organic frameworks (MOFs) are considered to be a promising porous material due to their excellent porosity and chemical tailorability. However, due to the relatively weak strength of coordination bonds, the stability (e.g., water stability) of MOFs is usually poor, which severely inhibits their practical applications. To prepare water-stable MOFs, several important strategies such as increasing the bonding strength of building units and introducing hydrophobic units have been proposed, and many MOFs with excellent water stability have been prepared. Carbon dioxide not only causes a range of climate and health problems but also is a by-product of some important chemicals (e.g., natural gas). Due to their excellent adsorption performances, MOFs are considered as a promising adsorbent that can capture carbon dioxide efficiently and energetically, and many water-stable MOFs have been used to capture carbon dioxide in various scenarios, including flue gas decarbonization, direct air capture, and purified crude natural gas. In this review, we first introduce the design and synthesis of water-stable MOFs and then describe their applications in carbon dioxide capture, and finally provide some personal comments on the challenges facing these areas.

Amine-Functionalized Amyloid Aerogels for CO2 Capture

Climate change caused by excessive CO2 emissions constitutes an increasingly dire threat to human life. Reducing CO2 emissions alone may not be sufficient to address this issue, so that the development of emerging adsorbents for the direct capture of CO2 from the air becomes essential. Here, we apply amyloid fibrils derived from different food proteins as the solid adsorbent support and develop aminosilane-modified amyloid fibril-templated aerogels for CO2 capture applications. The results indicate that the CO2 sorption properties of the aerogels depend on the mixing ratio of aminosilane featuring different amine groups and the type of amyloid fibril used. Notably, amine-functionalized β-lactoglobulin (BLG) fibril-templated aerogels show the highest CO2 adsorption capacity of 51.52 mg (1.17 mmol) CO2 /g at 1 bar CO2 and 25.5 mg (0.58 mmol) CO2 /g at 400 ppm; similarly, the CO2 adsorption capacity of chitosan-BLG fibril hybrid aerogels is superior to that of pure chitosan. This study provides a proof-of-concept design for an amyloid fibril-templated hybrid material facilitating applications of protein-based adsorbents for CO2 capture, including direct air capture.

Water vapour induced structural flexibility in a square lattice coordination network

Herein, we introduce a new square lattice topology coordination network, sql-(1,3-bib)(ndc)-Ni, with three types of connection and detail its gas and vapour induced phase transformations. Exposure to humidity resulted in an S-shaped isotherm profile, suggesting potential utility of such materials as desiccants.

Scalable Biomass-Derived Hydrogels for Sustainable Carbon Dioxide Capture

Carbon capture and sequestration are promising emissions mitigation technologies to counteract ongoing climate change. The aqueous amine scrubbing process is industrially mature but suffers from low energy efficiency and inferior stability. Solid sorbent-based carbon capture systems present a potentially advantageous alternative. However, practical implementation remains challenging due to limited CO2 uptake at dilute concentrations and difficulty in regeneration. Here, we develop sustainable carbon-capture hydrogels (SCCH) with an excellent CO2 uptake of 3.6 mmol g-1 (400 ppm) at room temperature. The biomass gel network consists of konjac glucomannan and hydroxypropyl cellulose, facilitating hierarchically porous structures for active CO2 transport and capture. Precaptured moisture significantly enhances CO2 binding by forming water molecule-stabilized zwitterions to improve the amine utilization efficiency. The thermoresponsive SCCH exhibits a notable advantage of low regeneration temperature at 60 °C, enabling solar-powered regeneration and highlighting the potential for sustainable carbon capture to meet global decarbonization targets.

Optimizing Sieving Effect for CO2 Capture from Humid Air Using an Adaptive Ultramicroporous Framework

Excessive CO2 in the air can not only lead to serious climate problems but also cause serious damage to humans in confined spaces. Here, a novel metal-organic framework (FJI-H38) with adaptive ultramicropores and multiple active sites is prepared. It can sieve CO2 from air with the very high adsorption capacity/selectivity but the lowest adsorption enthalpy among the reported physical adsorbents. Such excellent adsorption performances can be retained even at high humidity. Mechanistic studies show that the polar ultramicropore is very suitable for molecular sieving of CO2 from N2 , and the distinguishable adsorption sites for H2 O and CO2 enable them to be co-adsorbed. Notably, the adsorbed-CO2 -driven pore shrinkage can further promote CO2 capture while the adsorbed-H2 O-induced phase transitions in turn inhibit H2 O adsorption. Moreover, FJI-H38 has excellent stability and recyclability and can be synthesized on a large scale, making it a practical trace CO2 adsorbent. This will provide a new strategy for developing practical adsorbents for CO2 capture from the air.

Induced-Fit-Identification in a Rigid Metal-Organic Framework for ppm-Level CO2 Removal and Ultra-Pure CO Enrichment

Removing CO2 from crude syngas via physical adsorption is an effective method to yield eligible syngas. However, the bottleneck in trapping ppm-level CO2 and improving CO purity at higher working temperatures are major challenges. Here we report a thermoresponsive metal-organic framework (1 a-apz), assembled by rigid Mg2 (dobdc) (1 a) and aminopyrazine (apz), which not only affords an ultra-high CO2 capacity (145.0/197.6 cm3  g-1 (0.01/0.1 bar) at 298 K) but also produces ultra-pure CO (purity ≥99.99 %) at a practical ambient temperature (TA ). Several characterization results, including variable-temperature tests, in situ high-resolution synchrotron X-ray diffraction (HR-SXRD), and simulations, explicitly unravel that the excellent property is attributed to the induced-fit-identification in 1 a-apz that comprises self-adaption of apz, multiple binding sites, and complementary electrostatic potential (ESP). Breakthrough tests suggest that 1 a-apz can remove CO2 from 1/99 CO2 /CO mixtures at practical 348 K, yielding 70.5 L kg-1 of CO with ultra-high purity of ≥99.99 %. The excellent separation performance is also revealed by separating crude syngas that contains quinary mixtures of H2 /N2 /CH4 /CO/CO2 (46/18.3/2.4/32.3/1, v/v/v/v/v).

Enhanced CO2 sorption properties in a polarizable [WO2F4]2--pillared physisorbent under direct air capture conditions

We report the CO2 capture properties of an ultramicroporous physisorbent [Ni(WO2F4)(pyrazine)2]n, WO2F4-1-Ni, which crystallizes in I4/mcm (a = 9.91785(6) Å, c = 15.71516(9) Å) and its structure is solved using laboratory X-ray powder diffraction. The WO2F4 anion is acentric with polarizable WO bonds offering unique potential properties within a porous structure. Despite isostructural compounds being previously reported, the effect of this distorted anion on CO2 capture properties has not been studied. In this context, at a 400 ppm partial pressure of CO2 (applicable for direct air capture), this primitive cubic (pcu) network captures 0.934 mmolCO2 gsorbent-1 under dry conditions and 0.685 mmolCO2 gsorbent-1 at 75%RH, the highest capacity for a physisorbent reported to date.

An Upper Bound Visualization of Design Trade-Offs in Adsorbent Materials for Gas Separations: CO2 , N2 , CH4 , H2 , O2 , Xe, Kr, and Ar Adsorbents

The last 20 years have seen many publications investigating porous solids for gas adsorption and separation. The abundance of adsorbent materials (this work identifies 1608 materials for CO₂ /N₂ separation alone) provides a challenge to obtaining a comprehensive view of the field, identifying leading design strategies, and selecting materials for process modeling. In 2021, the empirical bound visualization technique was applied, analogous to the Robeson upper bound from membrane science, to alkane/alkene adsorbents. These bound visualizations reveal that adsorbent materials are limited by design trade-offs between capacity, selectivity, and heat of adsorption. The current work applies the bound visualization to adsorbents for a wider range of gas pairs, including CO₂ , N₂ , CH₄ , H₂ , Xe, O₂ , and Kr. How this visual tool can identify leading materials and place new material discoveries in the context of the wider field is presented. The most promising current strategies for breaking design trade-offs are discussed, along with reproducibility of published adsorption literature, and the limitations of bound visualizations. It is hoped that this work inspires new materials that push the bounds of traditional trade-offs while also considering practical aspects critical to the use of materials on an industrial scale such as cost, stability, and sustainability.

Low-concentration CO2 capture using metal-organic frameworks - current status and future perspectives

The ever-increasing atmospheric CO₂ level is considered to be the major cause of climate change. Although the move away from fossil fuel-based energy generation to sustainable energy sources would significantly reduce the release of CO₂ into the atmosphere, it will most probably take time to be fully implemented on a global scale. On the other hand, capturing CO₂ from emission sources or directly from the atmosphere are robust approaches that can reduce the atmospheric CO₂ concentration in a relatively short time. Here, we provide a perspective on the recent development of metal-organic framework (MOF)-based solid sorbents that have been investigated for application in CO₂ capture from low-concentration (<10 000 ppm) CO₂ sources. We summarized the different sorbent engineering approaches adopted by researchers, both from the sorbent development and processing viewpoints. We also discuss the immediate challenges of using MOF-based CO₂ sorbents for low-concentration CO₂ capture. MOF-based materials, with tuneable pore properties and tailorable surface chemistry, and ease of handling, certainly deserve continued development into low-cost, efficient CO₂ sorbents for low-concentration CO₂ capture.

Aluminum formate, Al(HCOO)3: An earth-abundant, scalable, and highly selective material for CO2 capture

A combination of gas adsorption and gas breakthrough measurements show that the metal-organic framework, Al(HCOO)3 (ALF), which can be made inexpensively from commodity chemicals, exhibits excellent CO2 adsorption capacities and outstanding CO2/N2 selectivity that enable it to remove CO2 from dried CO2-containing gas streams at elevated temperatures (323 kelvin). Notably, ALF is scalable, readily pelletized, stable to SO2 and NO, and simple to regenerate. Density functional theory calculations and in situ neutron diffraction studies reveal that the preferential adsorption of CO2 is a size-selective separation that depends on the subtle difference between the kinetic diameters of CO2 and N2. The findings are supported by additional measurements, including Fourier transform infrared spectroscopy, thermogravimetric analysis, and variable temperature powder and single-crystal x-ray diffraction.

Confinement effects facilitate low-concentration carbon dioxide capture with zeolites

Direct air capture (DAC) of CO₂ from the atmosphere is being pursued to aid in mitigating global CO₂ amounts and possibly reaching net negative emissions by 2050. We report that a type of commercialized zeolite, mordenite (MOR)-type zeolite, is a promising adsorbent for DAC because of its high CO₂ capacity, high selectivity, fast kinetics, low isosteric heat of adsorption, and high stability under simulated DAC conditions. We demonstrate that the primary site for CO₂ adsorption in the MOR-type zeolite is located at the side-pocket and that its size (i.e., the confinement effect) is the key to the performance by comparing its adsorption behavior to those obtained from a number of other zeolites with varying pore space sizes.

Engineered systems designed to remove CO₂ from the atmosphere need better adsorbents. Here, we report on zeolite-based adsorbents for the capture of low-concentration CO₂. Synthetic zeolites with the mordenite (MOR)-type framework topology physisorb CO₂ from low concentrations with fast kinetics, low heat of adsorption, and high capacity. The MOR-type zeolites can have a CO₂ capacity of up to 1.15 and 1.05 mmol/g for adsorption from 400 ppm CO₂ at 30 °C, measured by volumetric and gravimetric methods, respectively. A structure–performance study demonstrates that Na⁺ cations in the O33 site located in the side-pocket of the MOR-type framework, that is accessed through a ring of eight tetrahedral atoms (either Si⁴⁺ or Al³⁺: eight-membered ring [8MR]), is the primary site for the CO₂ uptake at low concentrations. The presence of N₂ and O₂ shows negligible impact on CO₂ adsorption in MOR-type zeolites, and the capacity increases to ∼2.0 mmol/g at subambient temperatures. By using a series of zeolites with variable topologies, we found the size of the confining pore space to be important for the adsorption of trace CO₂. The results obtained here show that the MOR-type zeolites have a number of desirable features for the capture of CO₂ at low concentrations.

Increased CO2 Affinity and Adsorption Selectivity in MOF-801 Fluorinated Analogues

The novel Zr^IV-based perfluorinated metal-organic framework (PF-MOF) [Zr₆O₄(OH)₄(TFS)₆] (ZrTFS) was prepared under solvent-free conditions using the commercially available tetrafluorosuccinic acid (H₂TFS) as a bridging ditopic linker. Since H₂TFS can be seen as the fully aliphatic and perfluorinated C₄ analogue of fumaric acid, ZrTFS was found to be isoreticular to zirconium fumarate (MOF-801). The structure of ZrTFS was solved and refined from X-ray powder diffraction data. Despite this analogy, the gas adsorption capacity of ZrTFS is much lower than that of MOF-801; in the former, the presence of bulky fluorine atoms causes a considerable window size reduction. To have PF-MOFs with more accessible porosity, postsynthetic exchange (PSE) reactions on (defective) MOF-801 suspended in H₂TFS aqueous solutions were carried out. Despite the different H₂TFS concentrations used in the PSE process, the exchanges yielded two mixed-linker materials of similar minimal formulae [Zr₆O₄(μ₃-OH)₄(μ₁-OH)_2.08(H₂O)_2.08(FUM)_4.04(HTFS)_1.84] (PF-MOF1) and [Zr₆O₄(μ₃-OH)₄(μ₁-OH)_1.83(H₂O)_1.83(FUM)_4.04(HTFS)_2.09] (PF-MOF2) (FUM^2- = fumarate), where the perfluorinated linker was found to fully replace the capping acetate in the defective sites of pristine MOF-801. CO₂ and N₂ adsorption isotherms collected on all samples reveal that both CO₂ thermodynamic affinity (isosteric heat of adsorption at zero coverage, Q_st) and CO₂/N₂ adsorption selectivity increase with the amount of incorporated TFS^2-, reaching the maximum values of 30 kJ mol^-1 and 41 (IAST), respectively, in PF-MOF2. This confirms the beneficial effect coming from the introduction of fluorinated linkers in MOFs on their CO₂ adsorption ability. Finally, solid-state density functional theory calculations were carried out to cast light on the structural features and on the thermodynamics of CO₂ adsorption in MOF-801 and ZrTFS. Due to the difficulties in modeling a defective MOF, an intermediate structure containing both linkers in the framework was also designed. In this structure, the preferential CO₂ adsorption site is the tetrahedral pore in the "UiO-66-like" structure. The extra energy stabilization stems from a hydrogen bond interaction between CO₂ and a hydroxyl group on the inorganic cluster.

Pillar Modularity in Topology Hybrid Ultramicroporous Materials Based upon Tetra(4-pyridyl)benzene

Hybrid ultramicroporous materials (HUMs) are porous coordination networks composed of combinations of organic and inorganic linker ligands with a pore diameter of <7 Å. Despite their benchmark gas sorption selectivity for several industrially relevant gas separations and their inherent modularity, the structural and compositional diversity of HUMs remains underexplored. In this contribution, we report a family of six HUMs (SIFSIX-22-Zn, TIFSIX-6-Zn, SNFSIX-2-Zn, GEFSIX-4-Zn, ZRFSIX-3-Zn, and TAFSEVEN-1-Zn) based on Zn metal centers and the tetratopic N-donor organic ligand tetra(4-pyridyl)benzene (tepb). The incorporation of fluorinated inorganic pillars (SiF₆ ^2-, TiF₆ ^2-, SnF₆ ^2-, GeF₆ ^2-, ZrF₆ ^2-, and TaF₇ ^2-, respectively) resulted in (4,6)-connected fsc topology as verified using single-crystal X-ray diffraction. Pure-component gas sorption studies with N₂, CO₂, C₂H₂, C₂H₄, and C₂H₆ revealed that the large voids and narrow pore windows common to all six HUMs can be leveraged to afford high C₂H₂ uptakes while retaining high ideal adsorbed solution theory (IAST) selectivities for industrially relevant gas mixtures: >10 for 1:99 C₂H₂/C₂H₄ and >5 for 1:1 C₂H₂/CO₂. The approach taken, systematic variation of pillars with retention of structure, enables differences in selectivity to be attributed directly to the choice of the inorganic pillar. This study introduces fsc topology HUMs as a modular platform that is amenable to fine-tuning of structure and properties.

Prospects for Simultaneously Capturing Carbon Dioxide and Harvesting Water from Air

Mitigation of anthropogenic climate change is expected to require large-scale deployment of carbon dioxide removal strategies. Prominent among these strategies is direct air capture with sequestration (DACS), which encompasses the removal and long-term storage of atmospheric CO₂  by purely engineered means. Because it does not require arable land or copious amounts of freshwater, DACS is already attractive in the context of sustainable development, but opportunities to improve its sustainability still exist. Leveraging differences in the chemistry of CO₂  and water adsorption within porous solids, here, the prospect of simultaneously removing water alongside CO₂  in direct air capture operations is investigated. In many cases, the co-adsorbed water can be desorbed separately from chemisorbed CO₂  molecules, enabling efficient harvesting of water from air. Depending upon the material employed and process conditions, the desorbed water can be of sufficiently high purity for industrial, agricultural, or potable use and can thus improve regional water security. Additionally, the recovered water can offset a portion of the costs associated with DACS. In this Perspective, molecular- and process-level insights are combined to identify routes toward realizing this nascent yet enticing concept.

Fluorinated metal-organic frameworks for gas separation

Fluorinated metal-organic frameworks (F-MOFs) as fast-growing porous materials have revolutionized the field of gas separation due to their tunable pore apertures, appealing chemical features, and excellent stability. A deep understanding of their structure-performance relationships is critical for the synthesis and development of new F-MOFs. This critical review has focused on several strategies for the precise design and synthesis of new F-MOFs with structures tuned for specific gas separation purposes. First, the basic principles and concepts of F-MOFs as well as their structure, synthesis and modification and their structure to property relationships are studied. Then, applications of F-MOFs in adsorption and membrane gas separation are discussed. A detailed account of the design and capabilities of F-MOFs for the adsorption of various gases and the governing principles is provided. In addition, the exceptional characteristics of highly stable F-MOFs with engineered pore size and tuned structures are put into perspective to fabricate selective membranes for gas separation. Systematic analysis of the position of F-MOFs in gas separation revealed that F-MOFs are benchmark materials in most of the challenging gas separations. The outlook and future directions of the science and engineering of F-MOFs and their challenges are highlighted to tackle the issues of overcoming the trade-off between capacity/permeability and selectivity for a serious move towards industrialization.

CO 2 Capture by Hybrid Ultramicroporous TIFSIX‐3‐Ni under Humid Conditions Using Non‐Equilibrium Cycling

Although pyrazine‐linked hybrid ultramicroporous materials (HUMs, pore size <7 Å) are benchmark physisorbents for trace carbon dioxide (CO₂) capture under dry conditions, their affinity for water (H₂O) mitigates their carbon capture performance in humid conditions. Herein, we report on the co‐adsorption of H₂O and CO₂ by TIFSIX‐3‐Ni—a high CO₂ affinity HUM—and find that slow H₂O sorption kinetics can enable CO₂ uptake and release using shortened adsorption cycles with retention of ca. 90 % of dry CO₂ uptake. Insight into co‐adsorption is provided by in situ infrared spectroscopy and ab initio calculations. The binding sites and sorption mechanisms reveal that both CO₂ and H₂O molecules occupy the same ultramicropore through favorable interactions between CO₂ and H₂O at low water loading. An energetically favored water network displaces CO₂ molecules at higher loading. Our results offer bottom‐up design principles and insight into co‐adsorption of CO₂ and H₂O that is likely to be relevant across the full spectrum of carbon capture sorbents to better understand and address the challenge posed by humidity to gas capture.

Recent advances in direct air capture by adsorption

Significant progress has been made in direct air capture (DAC) in recent years. Evidence suggests that the large-scale deployment of DAC by adsorption would be technically feasible for gigatons of CO₂ capture annually. However, great efforts in adsorption-based DAC technologies are still required. This review provides an exhaustive description of materials development, adsorbent shaping, in situ characterization, adsorption mechanism simulation, process design, system integration, and techno-economic analysis of adsorption-based DAC over the past five years; and in terms of adsorbent development, affordable DAC adsorbents such as amine-containing porous materials with large CO₂ adsorption capacities, fast kinetics, high selectivity, and long-term stability under ultra-low CO₂ concentration and humid conditions. It is also critically important to develop efficient DAC adsorptive processes. Research and development in structured adsorbents that operate at low-temperature with excellent CO₂ adsorption capacities and kinetics, novel gas-solid contactors with low heat and mass transfer resistances, and energy-efficient regeneration methods using heat, vacuum, and steam purge is needed to commercialize adsorption-based DAC. The synergy between DAC and carbon capture technologies for point sources can help in mitigating climate change effects in the long-term. Further investigations into DAC applications in the aviation, agriculture, energy, and chemical industries are required as well. This work benefits researchers concerned about global energy and environmental issues, and delivers perspective views for further deployment of negative-emission technologies.

Efficient One-Step Purification of C1 and C2 Hydrocarbons over CO2 in a New CO2-Selective MOF with a Gate-Opening Effect

Removing CO2 impurity is an essential industrial process in the purification of hydrocarbons. The most promising strategy is the one-step collection of high-purity hydrocarbons by employing CO2-selective adsorbents, which requires improving the CO2 adsorption and separation behavior of adsorbents, especially the low-pressure performance under actual industrial conditions. Herein, we constructed a new flexible metal-organic framework [Zn(odip)0.5(bpe)0.5(CH3OH)]·0.5NMF·H2O (1) (H4odip = 5,5'-oxydiisophthalic acid, bpe = 1,2-bi(4-pyridyl)ethylene, and NMF = N-methylformamide) containing rich ether O adsorption sites in the channels that exhibits remarkable adsorption capacity for CO2 (118.7 cm3 g-1) due to the only gate-opening-type abrupt adsorption of CO2 at room temperature. Its low affinity for other competing gases enables it to deliver high selectivity for the adsorption of CO2 over C1 and C2 hydrocarbons. For equimolar mixtures of CO2-CH4 and CO2-C2H2, the selectivities are 376.0 and 13.2, respectively. Molecular simulations disclose more abundant adsorption sites for CO2 than hydrocarbons in 1. The breakthrough separation performances combined with remarkable stability and recyclability further verify that 1 is a promising adsorbent that can efficiently extract high-purity hydrocarbons through selective capture of CO2.

Catalytic Hydrogenation of CO2 to Methanol: A Review

High-efficiency utilization of CO2 facilitates the reduction of CO2 concentration in the global atmosphere and hence the alleviation of the greenhouse effect. The catalytic hydrogenation of CO2 to produce value-added chemicals exhibits attractive prospects by potentially building energy recycling loops. Particularly, methanol is one of the practically important objective products, and the catalytic hydrogenation of CO2 to synthesize methanol has been extensively studied. In this review, we focus on some basic concepts on CO2 activation, the recent research advances in the catalytic hydrogenation of CO2 to methanol, the development of high-performance catalysts, and microscopic insight into the reaction mechanisms. Finally, some thinking on the present research and possible future trend is presented.

Effect of Unsaturated Metal Site Modulation in Highly Stable Microporous Materials on CO2 Capture and Fixation

We have designed and synthesized two unprecedented microporous three-dimensional metal-organic frameworks, {[Cd₆(TPOM)₃(L)₆]·12DMF·3H₂O}_n (1) and {[Zn₂(TPOM)(L)₂]·2DMF·H₂O}_n (2), based on a flexible quadritopic ligand, tetrakis(4-pyridyloxymethylene)methane (TPOM), and a bent dicarboxylic acid, 4,4'-(dimethylsilanediyl)bis-benzoic acid (H₂L). The networks of 1 and 2 share a 4-c uninodal net NbO topology but exhibit different metal environments due to coordination preferences of Cd(II) and Zn(II). The Cd(II) center in 1 is six-coordinated, whereas the Zn(II) center in 2 is only four-coordinated, making the latter an unsaturated metal center. Such modulation of coordination atmosphere of metal centers in MOFs with the same topology is possible due to diverse binding of the carboxylate groups of L^2-. Both 1 and 2 have relatively high thermal stability and exhibit permanent porosity after the removal of guest solvent molecules based on variable temperature powder X-ray diffraction and gas adsorption analysis. These materials exhibit similar gas adsorption properties, especially highly selective CO₂ uptake/capture over other gases (N₂ and CH₄). However, because of the presence of an unsaturated Lewis acidic metal site, 2 acts as a very efficient heterogeneous catalyst toward the chemical conversion of CO₂ to cyclic carbonates under mild conditions, whereas 1 shows very less activity. This work provides experimental evidence for the postulate that an unsaturated metal site in MOFs enhances adsoprtion of CO₂ and promotes its conversion via the Lewis-acid catalysis.

Unveiling the Temperature Influence on the Sorptive Behaviour of ZIF-8 Composite Materials Impregnated with [CnMIM][B(CN)4] Ionic Liquids

Composite sorbent materials (IL@MOF) with a metal-organic framework (MOF) ZIF-8 and [B(CN)4]−-based ionic liquids (ILs) were produced for the first time. Characterization results indicate the successful IL impregnation and conservation of the ZIF-8 crystalline structure and morphology. The data collected from the nitrogen (N2) physisorption at 77 K suggest that these IL@ZIF-8 materials are nonporous as their textural properties, such as BET specific surface area and total pore volume, are negligible. However, CO2, CH4, and N2 adsorption/desorption measurements in the IL@ZIF-8 composites at 303 and 273 K contradict the N2 data at 77 K, given that the obtained isotherms are Type I, typical of (micro)porous materials. Their gas adsorption capacity and ultramicroporous volume are in the same order of magnitude as the pristine microporous ZIF-8. The case study [C6MIM][B(CN)4] IL revealed a high affinity to both CO2 and CH4. This compromised the selectivity performance of its respective composite when compared with pristine ZIF-8. This work highlights the importance of accurate experimental gas adsorption/desorption equilibrium measurements to characterize the adsorption uptake and the porous nature of adsorbent materials.

Liquid-Metal-Enabled Mechanical-Energy-Induced CO2 Conversion

A green carbon capture and conversion technology offering scalability and economic viability for mitigating CO₂ emissions is reported. The technology uses suspensions of gallium liquid metal to reduce CO₂ into carbonaceous solid products and O₂ at near room temperature. The nonpolar nature of the liquid gallium interface allows the solid products to instantaneously exfoliate, hence keeping active sites accessible. The solid co-contributor of silver-gallium rods ensures a cyclic sustainable process. The overall process relies on mechanical energy as the input, which drives nano-dimensional triboelectrochemical reactions. When a gallium/silver fluoride mix at 7:1 mass ratio is employed to create the reaction material, 92% efficiency is obtained at a remarkably low input energy of 230 kWh (excluding the energy used for dissolving CO₂ ) for the capture and conversion of a tonne of CO₂ . This green technology presents an economical solution for CO₂ emissions.

Carbon dioxide capture with zeotype materials

This review describes the application of zeotype materials for the capture of CO2 in different scenarios, the critical parameters defining the adsorption performances, and the challenges of zeolitic adsorbents for CO2 capture.

An ato-topology metal–organic framework with large C2H2 adsorption and C2H2/CO2 separation capacity

The industrial separation of C2H2/CO2 is an energy-intensive process due to their similar molecular shapes. Here we demonstrate an ato-topology MOF with not only large C2H2 adsorption capacity but also high C2H2/CO2 selectivity.

Coordination flexibility aided CO2-specific gating in an Iron Isonicotinate MOF

Coordination flexibility assisted porosity has been introduced into an Iron-isonicotinate metal organic framework (MOF), (Fe(4-PyC) 2 .(OH). The framework showed CO 2 -specific gate opening behavior, which gets tuned as a function of temperature and pressure. The MOF's physisorptive porosity towards CO 2 , CH 4 , and N 2 was investigated; it adsorbed only CO 2 via a gate opening phenomenon. The isonicotinate, representing a borderline soft base, is bound to the hard Fe 3+ centre through monodentate carboxylate and pyridyl nitrogen. This moderately weak binding enables isonicotinate to spin like a spindle under the CO 2 pressure opening the gate for a sharp increase in CO 2 uptake at 333 mmHg (At 298K, the CO 2 uptake increases from 0.70 to 1.57 mmol/g). We investigated the MOF's potential for CO 2 /N 2 and CO 2 /CH 4 gas separation aided by this gating. IAST model reveals that the CO 2 /N 2 selectivity jumps from 325 to 3131 when the gate opens, while the CO 2 /CH 4 selectivity increases three times. Interestingly, this Fe-isonicotinate MOF did not follow the trend set by our earlier reported Hard-Soft Gate Control (established for isostructural M 2+ -isonicotinate MOFs (M = Mg, Mn)). However, we account for this discrepancy using the different oxidation state of metals confirmed by X-ray photoelectron spectroscopy and magnetism.

The First Sulfate-Pillared Hybrid Ultramicroporous Material, SOFOUR-1-Zn, and its Acetylene Capture Properties

Hybrid ultramicroporous materials, HUMs, are comprised of metal cations linked by combinations of inorganic and organic ligands. Their modular nature makes them amenable to crystal engineering studies, which have thus far afforded four HUM platforms (as classified by the inorganic linkers). HUMs are of practical interest because of their benchmark gas separation performance for several industrial gas mixtures. We report herein design and gram‐scale synthesis of the prototypal sulfate‐linked HUM, the fsc topology coordination network ([Zn(tepb)(SO₄)]_n), SOFOUR‐1‐Zn, tepb=(tetra(4‐pyridyl)benzene). Alignment of the sulfate anions enables strong binding to C₂H₂ via O⋅⋅⋅HC interactions but weak CO₂ binding, affording a new benchmark for the difference between C₂H₂ and CO₂ heats of sorption at low loading (ΔQ_st=24 kJ mol⁻¹). Dynamic column breakthrough studies afforded fuel‐grade C₂H₂ from trace (1 : 99) or 1 : 1 C₂H₂/CO₂ mixtures, outperforming its SiF₆²⁻ analogue, SIFSIX‐22‐Zn.

Three-in-One C2 H2 -Selectivity-Guided Adsorptive Separation across an Isoreticular Family of Cationic Square-Lattice MOFs

Energy-efficient selective physisorption driven C₂ H₂ separation from industrial C2-C1 impurities such as C₂ H₄ , CO₂ and CH₄ is of great importance in the purification of downstream commodity chemicals. We address this challenge employing a series of isoreticular cationic metal-organic frameworks, namely iMOF-nC (n=5, 6, 7). All three square lattice topology MOFs registered higher C₂ H₂ uptakes versus the competing C2-C1 gases (C₂ H₄ , CO₂ and CH₄ ). Dynamic column breakthrough experiments on the best-performing iMOF-6C revealed the first three-in-one C₂ H₂ adsorption selectivity guided separation of C₂ H₂ from 1:1 C₂ H₂ /CO₂ , C₂ H₂ /C₂ H₄ and C₂ H₂ /CH₄ mixtures. Density functional theory calculations critically examined the C₂ H₂ selective interactions in iMOF-6C. Thanks to the abundance of square lattice topology MOFs, this study introduces a crystal engineering blueprint for designing C₂ H₂ -selective layered metal-organic physisorbents, previously unreported in cationic frameworks.

Zinc Containing Small-Pore Zeolites for Capture of Low Concentration Carbon Dioxide

The capture of low concentration CO₂ presents numerous challenges. Here, we report that zinc containing chabazite (CHA) zeolites can realize high capacity, fast adsorption kinetics, and low desorption energy when capturing ca. 400 ppm CO₂ . Control of the state and location of the zinc ions in the CHA cage is critical to the performance. Zn²⁺ loaded onto paired anionic sites in the six-membered rings (6MRs) in the CHA cage are the primary sites to adsorb ca. 0.51 mmol CO₂ /g-zeolite with Si/Al=ca. 7, a 17-fold increase compared to the parent H-form. The capacity is increased further to ca. 0.67 mmol CO₂ /g-zeolite with Si/Al=ca. 2 due to more paired sites for zinc exchange. Zeolites with double six-membered rings (D6MRs) that orient 6MRs into the cages give enhanced uptakes for CO₂ adsorption with zinc exchange. The results reveal that zinc exchanged CHA and several other small pore, cage containing zeolites merit further investigation for the capture of low concentration CO₂ .

Breaking the trade-off between selectivity and adsorption capacity for gas separation

The trade-off between selectivity and adsorption capacity with porous materials is a major roadblock to reducing the energy footprint of gas separation technologies. To address this matter, we report herein a systematic crystal engineering study of C₂H₂ removal from CO₂ in a family of hybrid ultramicroporous materials (HUMs). The HUMs are composed of the same organic linker ligand, 4-(3,5-dimethyl-1H-pyrazol-4-yl)pyridine, pypz, three inorganic pillar ligands, and two metal cations, thereby affording six isostructural pcu topology HUMs. All six HUMs exhibited strong binding sites for C₂H₂ and weaker affinity for CO₂. The tuning of pore size and chemistry enabled by crystal engineering resulted in benchmark C₂H₂/CO₂ separation performance. Fixed-bed dynamic column breakthrough experiments for an equimolar (v/v = 1:1) C₂H₂/CO₂ binary gas mixture revealed that one sorbent, SIFSIX-21-Ni, was the first C₂H₂ selective sorbent that combines exceptional separation selectivity (27.7) with high adsorption capacity (4 mmol·g⁻¹).

•

Six isostructural hybrid ultramicroporous materials are prepared and characterized

•

Crystal engineering approach enabled fine-tuning of pore size and chemistry

•

Weak CO₂/strong C₂H₂ affinity resulted in high C₂H₂/CO₂ separation selectivities

•

SIFSIX-21-Ni: benchmark selectivity/uptake capacity for C₂H₂/CO₂ separation

It is generally recognized that porous solids (sorbents) with high selectivity and high adsorption capacity offer potential for energy-efficient gas separations. Unfortunately, there is generally a trade-off between capacity and selectivity, which represents a roadblock to the utility of sorbents in key industrial processes. For example, acetylene (C₂H₂), an important fuel and chemical intermediate, is produced with CO₂ as an impurity, and the similar physicochemical properties of C₂H₂ and CO₂ mean that most sorbents are poorly selective. Hybrid ultramicroporous materials (HUMs) are candidates for gas separations as they exhibit benchmark selectivity for several key gas pairs. Unfortunately, existing HUMs are handicapped by low capacity. We report a new HUM, SIFSIX-21-Ni, that addresses the trade-off between selectivity and capacity that has plagued sorbents, as its high uptake and high selectivity renders it the new benchmark for C₂H₂/CO₂ separation performance.

Monolithic metal-organic frameworks for carbon dioxide separation

Carbon dioxide (CO2) is both a primary contributor to global warming and a major industrial impurity. Traditional approaches to carbon capture involve corrosive and energy-intensive processes such as liquid amine absorption. Although adsorptive separation has long been a promising alternative to traditional processes, up to this point there has been a lack of appropriate adsorbents capable of capturing CO2 whilst maintaining low regeneration energies. In the context of CO2 capture, metal-organic frameworks (MOFs) have gained much attention in the past two decades as potential materials. Their tuneable nature allows for precise control over the pore size and chemistry, which allows for the tailoring of their properties for the selective adsorption of CO2. While many candidate materials exist, the amount of research into material shaping for use in industrial processes has been limited. Traditional shaping strategies such as pelletisation involve the use of binders and/or mechanical processes, which can have a detrimental impact on the adsorption properties of the resulting materials or can result in low-density structures with low volumetric adsorption capacities. Herein, we demonstrate the use of a series of monolithic MOFs (monoUiO-66, monoUiO-66-NH2 & monoHKUST-1) for use in gas separation processes.