Single-molecule kinetics of lambda exonuclease reveal base dependence and dynamic disorder

Isolation and Analysis of Rare Enzymatic Events with Multiplex Flow Magnetic Tweezers

Our understanding of biomolecular dynamics has been revolutionized with the advent of techniques that enable the manipulation of forces and torques at the single-molecule level. However, the characterization of rare intermediates has proven challenging due to limited throughput. In this chapter, we present a method that dramatically enhances the throughput of force spectroscopy measurements with topological control. The method allows for routine imaging of tens of thousands of individual molecules undergoing millions of reaction cycles in parallel. The improvement in throughput enables the discovery of rare enzymatic events. Here, we describe the experimental procedures for the observation and analysis of supercoiling dynamics by DNA gyrase. To efficiently quantify diverse dynamic behaviors and rare events, we introduce a software platform with an incorporated automated feature classification pipeline. This method and accompanying software can be freely adapted for investigations into a wide array of complex, multistep enzymatic pathways where the characterization of rare intermediates has been hindered by limited throughput.

The potential of fluorogenicity for single molecule FRET and DyeCycling

Single Molecule Förster Resonance Energy Transfer (smFRET) is a popular technique to directly observe biomolecular dynamics in real time, offering unique mechanistic insight into proteins, ribozymes, and so forth. However, inevitable photobleaching of the fluorophores puts a stringent limit on the total time a surface-tethered molecule can be monitored, fundamentally limiting the information gain through conventional smFRET measurements. DyeCycling addresses this problem by using reversibly - instead of covalently - coupled FRET fluorophores, through which it can break the photobleaching limit and theoretically provide unlimited observation time. In this perspective paper, we discuss the potential of various fluorogenic strategies to suppress the background fluorescence caused by unbound, freely diffusing fluorophores inherent to the DyeCycling approach. In comparison to nanophotonic background suppression using zero-mode waveguides, the fluorogenic approach would enable DyeCycling experiments on regular glass slides with fluorogenic FRET probes that are quenched in solution and only fluoresce upon target binding. We review a number of fluorogenic approaches and conclude, among other things, that short-range quenching appears promising for realising fluorogenic DyeCycling on regular glass slides. We anticipate that our discussion will be relevant for all single-molecule fluorescence techniques that use reversible fluorophore binding.

Converting Multiple- to Single-DNA-Tethered Beads and Removing Only-One-End-Tethered DNA in High-Throughput Stretching

S-DNA is a double-stranded DNA that forms under tensions of >65 pN. Here, we report that S-DNA resists the cleavage of Cas12a and the restriction endonuclease SmaI. Taking advantage of this resistance, in magnetic tweezer experiments, we developed an assay to convert multiple-DNA-tethered beads into single-DNA-tethered beads and remove the only-one-end-tethered DNA molecule by cleaving the DNA that does not transition to S-DNA at about 80 pN. When multiple DNA molecules are tethered to a single bead, they share the tension, exist in the B-form, and allow the cleavage. Only-one-end-tethered DNA molecules, free of tension, are also cleaved. In versatile types of experiments, we proved the broad applications of this assay: measuring the correct DNA elasticity and DNA condensation dynamics by avoiding the false results due to interference of only-one-end-tethered DNA molecules and quantifying the accurate cleavage rates of Cas12a and the restriction endonucleases by eliminating the error caused by multiple-DNA-tethered beads. This convenient assay ensures correct and accurate results in high-throughput DNA stretching experiments.

Nuclease-induced stepwise photodropping (NISP) to precisely investigate single-stranded DNA degradation behaviors of exonucleases and endonucleases

Here, we employed a fluorescence-based single molecule method called nuclease-induced stepwise photodropping (NISP) to measure in real time the DNA degradation mediated by mitochondrial genome maintenance exonuclease 1 (MGME1), a bidirectional single-stranded DNA (ssDNA)-specific exonuclease. The method detects a stepwise decrease in fluorescence signals from Cy3 fluorophores labeled on an immobilized DNA substrate. Using NISP, we successfully determined the DNA degradation rates of 6.3 ± 0.4 and 2.0 ± 0.1 nucleotides (nt) s-1 for MGME1 in the 5'-to-3' and 3'-to-5' directions, respectively. These results provide direct evidence of the stronger 5' directionality of MGME1, consistent with its established role in mitochondrial DNA maintenance. Importantly, when we employed NISP to investigate mung bean nuclease, an ss-specific endonuclease, we observed a markedly different NISP pattern, suggesting a distributive cleavage activity of the enzyme. Furthermore, we applied NISP to determine the ssDNA degradation behavior of the double-stranded-specific exonuclease, λ exonuclease. These findings underscore the capability of NISP to accurately and reliably measure the degradation of ssDNA by both exo- and endonucleases. Here, we demonstrate NISP as a powerful tool for investigating the ssDNA degradation behavior of nucleases at the single-molecule level.

Memory effects of transcription regulator-DNA interactions in bacteria

Memory effect refers to the phenomenon where past events influence a system's current and future states or behaviors. In biology, memory effects often arise from intra- or intermolecular interactions, leading to temporally correlated behaviors. Single-molecule studies have shown that enzymes and DNA-binding proteins can exhibit time-correlated behaviors of their activity. While memory effects are well documented and studied in vitro, no such examples exist in cells to our knowledge. Combining single-molecule tracking (SMT) and single-cell protein quantitation, we find in living Escherichia coli cells distinct temporal correlations in the binding/unbinding events on DNA by MerR- and Fur-family metalloregulators, manifesting as memory effects with timescales of ~1 s. These memory effects persist irrespective of the type of the metalloregulators or their metallation states. Moreover, these temporal correlations of metalloregulator-DNA interactions are associated with spatial confinements of the metalloregulators near their DNA binding sites, suggesting microdomains of ~100 nm in size that possibly result from the spatial organizations of the bacterial chromosome without the involvement of membranes. These microdomains likely facilitate repeated binding events, enhancing regulator-DNA contact frequency and potentially gene regulation efficiency. These findings provide unique insights into the spatiotemporal dynamics of protein-DNA interactions in bacterial cells, introducing the concept of microdomains as a crucial player in memory effect-driven gene regulation.

RPA transforms RNase H1 to a bidirectional exoribonuclease for processive RNA-DNA hybrid cleavage

RNase H1 has been acknowledged as an endoribonuclease specializing in the internal degradation of the RNA moiety within RNA-DNA hybrids, and its ribonuclease activity is indispensable in multifaceted aspects of nucleic acid metabolism. However, the molecular mechanism underlying RNase H1-mediated hybrid cleavage remains inadequately elucidated. Herein, using single-molecule approaches, we probe the dynamics of the hybrid cleavage by Saccharomyces cerevisiae RNase H1. Remarkably, a single RNase H1 enzyme displays 3'-to-5' exoribonuclease activity. The directional RNA degradation proceeds processively and yet discretely, wherein unwinding approximately 6-bp hybrids as a prerequisite for two consecutive 3-nt RNA excisions limits the overall rate within each catalytic cycle. Moreover, Replication Protein A (RPA) reinforces RNase H1's 3'-to-5' nucleolytic rate and processivity and stimulates its 5'-to-3' exoribonuclease activity. This stimulation is primarily realized through the pre-separation of the hybrids and consequently transfers RNase H1 to a bidirectional exoribonuclease, further potentiating its cleavage efficiency. These findings unveil unprecedented characteristics of an RNase and provide a dynamic view of RPA-enhanced processive hybrid cleavage by RNase H1.

Single-molecule characterization of SV40 replisome and novel factors: human FPC and Mcm10

The simian virus 40 (SV40) replisome only encodes for its helicase; large T-antigen (L-Tag), while relying on the host for the remaining proteins, making it an intriguing model system. Despite being one of the earliest reconstituted eukaryotic systems, the interactions coordinating its activities and the identification of new factors remain largely unexplored. Herein, we in vitro reconstituted the SV40 replisome activities at the single-molecule level, including DNA unwinding by L-Tag and the single-stranded DNA-binding protein Replication Protein A (RPA), primer extension by DNA polymerase δ, and their concerted leading-strand synthesis. We show that RPA stimulates the processivity of L-Tag without altering its rate and that DNA polymerase δ forms a stable complex with L-Tag during leading-strand synthesis. Furthermore, similar to human and budding yeast Cdc45-MCM-GINS helicase, L-Tag uses the fork protection complex (FPC) and the mini-chromosome maintenance protein 10 (Mcm10) during synthesis. Hereby, we demonstrate that FPC increases this rate, and both FPC and Mcm10 increase the processivity by stabilizing stalled replisomes and increasing their chances of restarting synthesis. The detailed kinetics and novel factors of the SV40 replisome establish it as a closer mimic of the host replisome and expand its application as a model replication system.

Identical sequences, different behaviors: Protein diversity captured at the single-molecule level

The classical "one sequence, one structure, one function" paradigm has shaped much of our intuition of how proteins work inside the cell. Partially due to the insight provided by bulk biochemical assays, individual biomolecules are often assumed to behave as identical entities, and their characterization relies on ensemble averages that flatten any conformational diversity into a unique phenotype. While the emergence of single-molecule techniques opened the gates to interrogating individual molecules, technical shortcomings typically limit the duration of these measurements, which precludes a complete characterization of an individual protein and, hence, capturing the heterogeneity among molecular populations. Here, we introduce an ultrastable magnetic tweezers design, which enables us to measure the folding dynamics of a single protein during several uninterrupted days with high temporal and spatial resolution. Thanks to this instrumental development, we fully characterize the nanomechanics of two proteins with a very distinct force response, the talin R3IVVI domain and protein L. Days-long recordings on the same protein individual accumulate thousands of folding transitions with submicrosecond resolution, allowing us to reconstruct their free energy landscapes and describe how they evolve with force. By mapping the nanomechanical identity of many different protein individuals, we directly capture their molecular diversity as a quantifiable dispersion on their force response and folding kinetics. By significantly expanding the measurable timescales, our instrumental development offers a tool for profiling individual molecules, opening the gates to directly characterizing biomolecular heterogeneity.

Half a century after their discovery: Structural insights into exonuclease and annealase proteins catalyzing recombineering

Recombineering is an essential tool for molecular biologists, allowing for the facile and efficient manipulation of bacterial genomes directly in cells without the need for costly and laborious in vitro manipulations involving restriction enzymes. The main workhorses behind recombineering are bacteriophage proteins that promote the single-strand annealing (SSA) homologous recombination pathway to repair double-stranded DNA breaks. While there have been several reviews examining recombineering methods and applications, comparatively few have focused on the mechanisms of the proteins that are the key players in the SSA pathway: a 5'→3' exonuclease and a single-strand annealing protein (SSAP or "annealase"). This review dives into the structures and functions of the two SSA recombination systems that were the first to be developed for recombineering in E. coli: the RecET system from E. coli Rac prophage and the λRed system from bacteriophage λ. By comparing the structures of the RecT and Redβ annealases, and the RecE and λExo exonucleases, we provide new insights into how the structures of these proteins dictate their function. Examining the sequence conservation of the λExo and RecE exonucleases gives more profound insights into their critical functional features. Ultimately, as recombineering accelerates and evolves in the laboratory, a better understanding of the mechanisms of the proteins behind this powerful technique will drive the development of improved and expanded capabilities in the future.

A minimal kinetic model for the interpretation of complex catalysis in single enzyme molecules

Multi-exponential waiting-time distribution and randomness parameter greater than unity ascribe dynamic disorder in single-enzyme catalysis corroborated to the interplay of transforming conformers [English et al., Nat. Chem. Biol., 2006, 2, 87]. The associated multi-state model of enzymatic turnovers with statically heterogeneous catalytic rates misdescribes the non-linear uprising of the randomness parameter from unity in relation to the attributes of the fall-offs of the waiting-time distribution at different substrate concentrations. To resolve this crucial issue, we first employ a comprehensive stochastic reaction scenario and further rationalize and work out the minimal indispensable dynamic-disorder model that ensures the foregoing relationship upon comparison with the data. We elucidate that specific disregard for the transition rate coefficients in the multi-state model on account of the especially slow conformational transitions is the underlying reason for not achieving interrelation between the observables.

Embracing Heterogeneity: Challenging the Paradigm of Replisomes as Deterministic Machines

The paradigm of cellular systems as deterministic machines has long guided our understanding of biology. Advancements in technology and methodology, however, have revealed a world of stochasticity, challenging the notion of determinism. Here, we explore the stochastic behavior of multi-protein complexes, using the DNA replication system (replisome) as a prime example. The faithful and timely copying of DNA depends on the simultaneous action of a large set of enzymes and scaffolding factors. This fundamental cellular process is underpinned by dynamic protein-nucleic acid assemblies that must transition between distinct conformations and compositional states. Traditionally viewed as a well-orchestrated molecular machine, recent experimental evidence has unveiled significant variability and heterogeneity in the replication process. In this review, we discuss recent advances in single-molecule approaches and single-particle cryo-EM, which have provided insights into the dynamic processes of DNA replication. We comment on the new challenges faced by structural biologists and biophysicists as they attempt to describe the dynamic cascade of events leading to replisome assembly, activation, and progression. The fundamental principles uncovered and yet to be discovered through the study of DNA replication will inform on similar operating principles for other multi-protein complexes.

Probing conformational kinetics of catalase with and without magnetic field by single-entity collision electrochemistry

The conformational motions of enzymes are crucial for their catalytic activities, but these fluctuations are usually spontaneous and unsynchronized and thus difficult to obtain from ensemble-averaged measurements. Here, we employ label-free single-entity electrochemical measurements to monitor in real time the fluctuating enzymatic behavior of single catalase molecules toward the degradation of hydrogen peroxide. By probing the electrochemical signals of single catalase molecules at a carbon nanoelectrode, we were able to observe three distinct current traces that could be attributed to conformational changes on the sub-millisecond timescale. Whereas, nearly uniform single long peaks were observed for single catalase molecules under a moderate magnetic field due to the restricted conformational changes of catalase. By combining high-resolution current signals with a multiphysics simulation model, we studied the catalytic kinetics of catalase with and without a magnetic field, and further estimated the maximum catalytic rate and conformational transition rate. This work introduces a new complementary approach to existing single-molecule enzymology, giving further insight into the enzymatic reaction mechanism.

Discrete RNA-DNA hybrid cleavage by the EXD2 exonuclease pinpoints two rate-limiting steps

EXD2 is a recently identified exonuclease that cleaves RNA and DNA in double-stranded (ds) forms. It thus serves as a model system for investigating the similarities and discrepancies between exoribonuclease and exodeoxyribonuclease activities and for understanding the nucleic acid (NA) unwinding-degradation coordination of an exonuclease. Here, using a single-molecule fluorescence resonance energy transfer (smFRET) approach, we show that despite stable binding to both substrates, EXD2 barely cleaves dsDNA and yet displays both exoribonuclease and exodeoxyribonuclease activities toward RNA-DNA hybrids with a cleavage preference for RNA. Unexpectedly, EXD2-mediated hybrid cleavage proceeds in a discrete stepwise pattern, wherein a sudden 4-bp duplex unwinding increment and the subsequent dwell constitute a complete hydrolysis cycle. The relatively weak exodeoxyribonuclease activity of EXD2 partially originates from frequent hybrid rewinding. Importantly, kinetic analysis and comparison of the dwell times under varied conditions reveal two rate-limiting steps of hybrid unwinding and nucleotide excision. Overall, our findings help better understand the cellular functions of EXD2, and the cyclic coupling between duplex unwinding and exonucleolytic degradation may be generalizable to other exonucleases.

Theoretical Tools to Quantify Stochastic Fluctuations in Single-Molecule Catalysis by Enzymes and Nanoparticles

Single-molecule microscopic techniques allow the counting of successive turnover events and the study of the time-dependent fluctuations of the catalytic activities of individual enzymes and different sites on a single heterogeneous nanocatalyst. It is important to establish theoretical methods to obtain the statistical measurements of such stochastic fluctuations that provide insight into the catalytic mechanism. In this review, we discuss a few theoretical frameworks for evaluating the first passage time distribution functions using a self-consistent pathway approach and chemical master equations, to establish a connection with experimental observables. The measurable probability distribution functions and their moments depend on the molecular details of the reaction and provide a way to quantify the molecular mechanisms of the reaction process. The statistical measurements of these fluctuations should provide insight into the enzymatic mechanism.

Activatable Self-Dissociation of Watson-Crick Structures with Fluorescent Nucleotides for Sensing Multiple Human Glycosylases at Single-Cell Level

Nucleobase oxidation and alkylation can destroy Watson-Crick base-pairing to challenge the genomic integrity. Human 8-oxoguanine glycosylase 1 (hOGG1) and alkyladenine glycosylase (hAAG) are evolved to counter these two cytotoxic lesions through base-excision repair, and their deregulations are implicated with multifactorial diseases and cancers. Herein, we demonstrate activatable self-dissociation of Watson-Crick structures with fluorescent nucleotides for sensing multiple human glycosylases at single-cell level. The presence of hOGG1 and hAAG catalyzes 8-oxoG and deoxyinosine removal in functional probe 1 to release two trigger probes (1 and 2). Then, trigger probes hybridize with functional probe 2 to activate the autocatalytic degradation of functional probes 2 (Cycle I) and 3 (Cycle II), replicating abundant trigger probes (1-4) and releasing two fluorophores (2-aminopurine (2-AP) and pyrrolo-dC (P-dC)). New trigger probes (1, 2) and (3, 4), in turn, hybridize with free functional probes 2 and 3, repeating Cycles I and II turnovers. Through multicycle self-dissociation of Watson-Crick structures, 2-AP and P-dC are exponentially accumulated for the simultaneous quantification of hOGG1 and hAAG. This nanodevice exhibits high sensitivity with a detection limit of 2.9 × 10^-3 U/mL for hOOG1 and 1.5 × 10^-3 U/mL for hAAG, and it can measure enzymatic kinetics, identify potential inhibitors, discriminate glycosylases between cancer and normal cell lines, and even quantify glycosylase activities in a single HeLa cell. Moreover, this assay may be rapidly and isothermally performed in one tube with only one tool enzyme in a quencher-free manner, promising a simple and powerful platform for multiple human glycosylase detection.

Low cost and massively parallel force spectroscopy with fluid loading on a chip

Current approaches for single molecule force spectroscopy are typically constrained by low throughput and high instrumentation cost. Herein, a low-cost, high throughput technique is demonstrated using microfluidics for multiplexed mechanical manipulation of up to ~4000 individual molecules via molecular fluid loading on-a-chip (FLO-Chip). The FLO-Chip consists of serially connected microchannels with varying width, allowing for simultaneous testing at multiple loading rates. Molecular force measurements are demonstrated by dissociating Biotin-Streptavidin and Digoxigenin-AntiDigoxigenin interactions along with unzipping of double stranded DNA of varying sequence under different dynamic loading rates and solution conditions. Rupture force results under varying loading rates and solution conditions are in good agreement with prior studies, verifying a versatile approach for single molecule biophysics and molecular mechanobiology. FLO-Chip enables straightforward, rapid, low-cost, and portable mechanical testing of single molecules that can be implemented on a wide range of microscopes to broaden access and may enable new applications of molecular force spectroscopy.

Rapid single-molecule characterisation of enzymes involved in nucleic-acid metabolism

The activity of enzymes is traditionally characterised through bulk-phase biochemical methods that only report on population averages. Single-molecule methods are advantageous in elucidating kinetic and population heterogeneity but are often complicated, time consuming, and lack statistical power. We present a highly-generalisable and high-throughput single-molecule assay to rapidly characterise proteins involved in DNA metabolism. The assay exclusively relies on changes in total fluorescence intensity of surface-immobilised DNA templates as a result of DNA synthesis, unwinding or digestion. Combined with an automated data-analysis pipeline, our method provides enzymatic activity data of thousands of molecules in less than an hour. We demonstrate our method by characterising three fundamentally different enzyme activities: digestion by the phage λ exonuclease, synthesis by the phage Phi29 polymerase, and unwinding by the E. coli UvrD helicase. We observe the previously unknown activity of the UvrD helicase to remove neutravidin bound to 5'-, but not 3'-ends of biotinylated DNA.

Programming Dissipation Systems by DNA Timer for Temporally Regulating Enzyme Catalysis and Nanostructure Assembly

Live cells precisely control their temporal pattern in energy dissipative processes such as catalysis and assembly. Here, we demonstrate a DNA-based artificial dissipative nonequilibrium system where the transient state is controlled by the processive digestion of λ-exonuclease (λ Exo). This enzyme reaction serves as an orthogonal and independent molecular timer allowing for the programmable regulation of the transient-state lifetime. This dissipation system is concatenated to enzyme catalysis and nanostructure assembly networks. Dynamic activation of enzyme catalysis and dynamic disassembly of DNA nanotubes (DNT) are realized, and the state lifetimes of these systems are accurately encoded by the DNA timer. This work demonstrates nontrivial dissipation systems with built-in molecular timers, which can be a useful tool for developing artificial reaction networks and nanostructures with enhanced complexities and intelligence.

Molecular homogeneity of GB1 revealed by single molecule force spectroscopy

In single molecule studies, the ergodic hypothesis is inherently assumed, which states that the time average of a physical quantity of a single member of an ensemble is the same as the average of the same quantity on the whole ensemble at a given time. This hypothesis implies the homogeneity of a molecular ensemble of a system of interest. However, it is difficult to test the validity of the ergodic hypothesis experimentally. Recent theoretical work suggested that heterogeneity may be widely present in single molecule force spectroscopy studies. Here we used atomic force microscope based single molecule force spectroscopy to examine the molecular homogeneity/heterogeneity of a small globular protein GB1 in its mechanical unfolding reaction. Using a polyprotein (GB1)₄, we directly measured the ensemble average and time average for a single molecule of the mechanical unfolding force and kinetic parameters that characterize the mechanical unfolding free energy profile of GB1. Our results showed that the ensemble averages of these physical quantities are indeed the same as the time averages for single molecules, and individual molecules did not show any differences amongst them in these physical quantities. These results are consistent with the expectation of the ergodic hypothesis and indicate that GB1 is a homogeneous molecular ensemble in its mechanical unfolding reaction on the time scale of our force spectroscopy experiments.

An alternative to MINFLUX that enables nanometer resolution in a confocal microscope

Localization of single fluorescent emitters is key for physicochemical and biophysical measurements at the nanoscale and beyond ensemble averaging. Examples include single-molecule tracking and super-resolution imaging by single-molecule localization microscopy. Among the numerous localization methods available, MINFLUX outstands for achieving a ~10-fold improvement in resolution over wide-field camera-based approaches, reaching the molecular scale at moderate photon counts. Widespread application of MINFLUX and related methods has been hindered by the technical complexity of the setups. Here, we present RASTMIN, a single-molecule localization method based on raster scanning a light pattern comprising a minimum of intensity. RASTMIN delivers ~1-2 nm localization precision with usual fluorophores and is easily implementable on a standard confocal microscope with few modifications. We demonstrate the performance of RASTMIN in localization of single molecules and super-resolution imaging of DNA origami structures.

Reaction-path statistical mechanics of enzymatic kinetics

We introduce a reaction-path statistical mechanics formalism based on the principle of large deviations to quantify the kinetics of single-molecule enzymatic reaction processes under the Michaelis-Menten mechanism, which exemplifies an out-of-equilibrium process in the living system. Our theoretical approach begins with the principle of equal a priori probabilities and defines the reaction path entropy to construct a new nonequilibrium ensemble as a collection of possible chemical reaction paths. As a result, we evaluate a variety of path-based partition functions and free energies by using the formalism of statistical mechanics. They allow us to calculate the timescales of a given enzymatic reaction, even in the absence of an explicit boundary condition that is necessary for the equilibrium ensemble. We also consider the large deviation theory under a closed-boundary condition of the fixed observation time to quantify the enzyme-substrate unbinding rates. The result demonstrates the presence of a phase-separation-like, bimodal behavior in unbinding events at a finite timescale, and the behavior vanishes as its rate function converges to a single phase in the long-time limit.

A common framework for single-molecule localization using sequential structured illumination

Localization of single fluorescent molecules is key for physicochemical and biophysical measurements, such as single-molecule tracking and super-resolution imaging by single-molecule localization microscopy. Over the last two decades, several methods have been developed in which the position of a single emitter is interrogated with a sequence of spatially modulated patterns of light. Among them, the recent MINFLUX technique outstands for achieving a ∼10-fold improvement compared with wide-field camera-based single-molecule localization, reaching ∼1-2 nm localization precision at moderate photon counts. Here, we present a common framework for this type of measurement. Using the Cramér-Rao bound as a limit for the achievable localization precision, we benchmark reported methods, including recent developments, such as MINFLUX and MINSTED, and long-established methods, such as orbital tracking. In addition, we characterize two new proposed schemes, orbital tracking and raster scanning, with a minimum of intensity. Overall, we found that approaches using an intensity minimum have a similar performance in the central region of the excitation pattern, independent of the geometry of the excitation pattern, and that they outperform methods featuring an intensity maximum.

RNase H is an exo- and endoribonuclease with asymmetric directionality, depending on the binding mode to the structural variants of RNA:DNA hybrids

RNase H is involved in fundamental cellular processes and is responsible for removing the short stretch of RNA from Okazaki fragments and the long stretch of RNA from R-loops. Defects in RNase H lead to embryo lethality in mice and Aicardi-Goutieres syndrome in humans, suggesting the importance of RNase H. To date, RNase H is known to be a non-sequence-specific endonuclease, but it is not known whether it performs other functions on the structural variants of RNA:DNA hybrids. Here, we used Escherichia coli RNase H as a model, and examined its catalytic mechanism and its substrate recognition modes, using single-molecule FRET. We discovered that RNase H acts as a processive exoribonuclease on the 3' DNA overhang side but as a distributive non-sequence-specific endonuclease on the 5' DNA overhang side of RNA:DNA hybrids or on blunt-ended hybrids. The high affinity of previously unidentified double-stranded (ds) and single-stranded (ss) DNA junctions flanking RNA:DNA hybrids may help RNase H find the hybrid substrates in long genomic DNA. Our study provides new insights into the multifunctionality of RNase H, elucidating unprecedented roles of junctions and ssDNA overhang on RNA:DNA hybrids.

Quantifying the force in flow-cell based single-molecule stretching experiments

The flow-cell based single-molecule manipulation technique has found many applications in the study of DNA mechanics and protein-DNA interactions. However, the force in these experiments has not been fully characterized and is usually limited to a moderate force regime (<25 pN). In this work, using the "tethered-bead" assay, the hydrodynamic drag of DNA has been quantitatively evaluated based on a "bead-spring chain" model. The force derived from the Brownian motion of the bead thus contains both contributions from this equivalent hydrodynamic drag of DNA and the pulling force from the tethered bead. Next, using flow-cell based DNA pulling experiments, the linear relationship between the flow rate and total hydrodynamic force on the bead-DNA system has been demonstrated to be valid over a wide force range (0-110 pN). Consequently, the force can be directly converted from the flow rate by a linear factor that can be calibrated either by the bead's Brownian motion at low flow rates or using DNA overstretching transition. Furthermore, the hydrodynamic force and torque due to the shear flow on the bead as well as the equivalent stretching force on DNA are calculated based on theoretical models with the hydrodynamic drag on DNA also considered. The calculated force-extension curves show a good agreement with the measured ones. These results offer important insights into the force in flow-cell based single-molecule stretching experiments and provide a foundation for establishing flow-cells as a simple, low-cost, yet flexible and precise tool for single-molecule force measurements over a wide force range.

A Revisit to Turnover Kinetics of Individual Escherichia coli β-Galactosidase Molecules

Single-molecule experiments on β-galactosidase from Escherichia coli that catalyzes the hydrolysis of resorufin-β-d-galactopyranoside revealed important observations like fluctuating catalytic rate, memory effects arising from temporal correlations between the enzymatic turnovers and nonexponential waiting time distributions. The root cause of the observed results is intrinsic fluctuations among the different conformers of the active species, during the course of the reaction, thereby imparting dynamic disorder in the system under investigation. Originally, a multistate stochastic kinetic theory was employed that, despite satisfying the measured waiting time distributions and the mean waiting times at different substrate concentrations, yields a constant estimate of the randomness parameter. Inevitably, this manifests a strong disagreement with the substrate-concentration-dependent time variations of the said distribution, which at the same time misinterprets the measured magnitudes of the randomness parameter at lower concentrations. Here, we suggest a dual approach to the single-enzyme reaction, independently, making important improvements over the parent study and the recently suggested two-state stochastic analyses followed by quantitative rationalization of the experimental data. In the first case, an off-pathway mechanism satisfied the Michaelis-Menten equation under the circumstance of prevailing disorder while tested against the single-molecule data. However, recovery of randomness data in the lower-concentration regime, albeit primarily marks a significant refinement, a qualitative agreement at the growing concentrations seems to be reasoned by an account of switching among the limited numbers of discrete conformers. Consequently, in the second case, we circumvented the conventional way of approaching the enzyme catalysis and mapped the dynamics of structural transitions of the biocatalyst with the temporal fluctuations of the spatial distance between the different locations along a coarse-grained polymer chain. Exploiting a general mechanism for dynamic disorder, a reaction-diffusion formalism yielded an analytical expression for the waiting time distribution of the enzymatic turnovers, from which the mean waiting time and the randomness parameter were readily determined. Application of our results to the findings of the experiment on single β-galactosidase shows a quantitative agreement in each case. This soundly validates the usefulness of accounting for a more rigorous microscopic description pertinent to the conformational multiplicity in rationalizing the real-time data over the routine state-based sketch of the reaction system.

Non-flipping DNA glycosylase AlkD scans DNA without formation of a stable interrogation complex

The multi-step base excision repair (BER) pathway is initiated by a set of enzymes, known as DNA glycosylases, able to scan DNA and detect modified bases among a vast number of normal bases. While DNA glycosylases in the BER pathway generally bend the DNA and flip damaged bases into lesion specific pockets, the HEAT-like repeat DNA glycosylase AlkD detects and excises bases without sequestering the base from the DNA helix. We show by single-molecule tracking experiments that AlkD scans DNA without forming a stable interrogation complex. This contrasts with previously studied repair enzymes that need to flip bases into lesion-recognition pockets and form stable interrogation complexes. Moreover, we show by design of a loss-of-function mutant that the bimodality in scanning observed for the structural homologue AlkF is due to a key structural differentiator between AlkD and AlkF; a positively charged β-hairpin able to protrude into the major groove of DNA.

The mechanism of gap creation by a multifunctional nuclease during base excision repair

During base excision repair, a transient single-stranded DNA (ssDNA) gap is produced at the apurinic/apyrimidinic (AP) site. Exonuclease III, capable of performing both AP endonuclease and exonuclease activity, are responsible for gap creation in bacteria. We used single-molecule fluorescence resonance energy transfer to examine the mechanism of gap creation. We found an AP site anchor-based mechanism by which the intrinsically distributive enzyme binds strongly to the AP site and becomes a processive enzyme, rapidly creating a gap and an associated transient ssDNA loop. The gap size is determined by the rigidity of the ssDNA loop and the duplex stability of the DNA and is limited to a few nucleotides to maintain genomic stability. When the 3' end is released from the AP endonuclease, polymerase I quickly initiates DNA synthesis and fills the gap. Our work provides previously unidentified insights into how a signal of DNA damage changes the enzymatic functions.

Nanomechanics of self-assembled DNA building blocks

DNA has become a powerful platform to design functional nanodevices. DNA nanodevices are often composed of self-assembled DNA building blocks that differ significantly from the structure of native DNA. In this study, we present Flow Force Microscopy as a massively parallel approach to study the nanomechanics of DNA self-assemblies on the single-molecular level. The high-throughput experiments performed in a simple microfluidic channel enable statistically meaningful studies with nanometer scale precision in a time frame of several minutes. A surprisingly high flexibility was observed for a typical construct used in DNA origami, reflected in a persistence length of 10.2 nm, a factor of five smaller than for native DNA. The enhanced flexibility is attributed to the discontinuous backbone of DNA self-assemblies that facilitate base pair opening by thermal fluctuations at the end of hybridized oligomers. We believe that the results will contribute to the fundamental understanding of DNA nanomechanics and help to improve the design of DNA nanodevices with applications in biological analysis and clinical research.

Highly-Parallel Microfluidics-Based Force Spectroscopy on Single Cytoskeletal Motors

Cytoskeletal motors transform chemical energy into mechanical work to drive essential cellular functions. Optical trapping experiments have provided crucial insights into the operation of these molecular machines under load. However, the throughput of such force spectroscopy experiments is typically limited to one measurement at a time. Here, a highly-parallel, microfluidics-based method that allows for rapid collection of force-dependent motility parameters of cytoskeletal motors with two orders of magnitude improvement in throughput compared to currently available methods is introduced. Tunable hydrodynamic forces to stepping kinesin-1 motors via DNA-tethered beads and utilize a large field of view to simultaneously track the velocities, run lengths, and interaction times of hundreds of individual kinesin-1 molecules under varying resisting and assisting loads are applied. Importantly, the 16 µm long DNA tethers between the motors and the beads significantly reduces the vertical component of the applied force pulling the motors away from the microtubule. The approach is readily applicable to other molecular systems and constitutes a new methodology for parallelized single-molecule force studies on cytoskeletal motors.

Single enzyme electroanalysis

Traditional studies of enzymatic activity rely on the combined kinetics of millions of enzyme molecules to produce a product, an experimental approach that may wash out heterogeneities that exist between individual enzymes. Evaluating these properties on an enzyme-by-enzyme basis represents an unambiguous means of elucidating heterogeneities; however, the quantification of enzymatic activity at the single-enzyme level is fundamentally limited by the maximum catalytic rate, k_cat, inherent to a given enzyme. For electrochemical methods measuring current, single enzymes must turn over greater than 10⁷ molecules per second to produce a measurable signal on the order of 10^-12 A. Enzymes with this capability are extremely rare in nature, with typical k_cat values for biologically relevant enzymes falling between 1 and 10 000 s^-1. Thus, clever amplification strategies are necessary to electrochemically detect the vast majority of enzymes. This review details the progress toward the electroanalytical detection and evaluation of single enzyme kinetics largely focused on the nanoimpact method, a chronoamperometric detection strategy that monitors the change in the current-time profile associated with stochastic collisions of freely diffusing entities (e.g., enzymes) onto a microelectrode or nanoelectrode surface. We discuss the experimental setups and methods developed in the last decade toward the quantification of single molecule enzymatic rates. Special emphasis is given to the limitations of measurement science in the observation of single enzyme activity and feasible methods of signal amplification with reasonable bandwidth.

Optical tweezers in single-molecule biophysics

Optical tweezers have become the method of choice in single-molecule manipulation studies. In this Primer, we first review the physical principles of optical tweezers and the characteristics that make them a powerful tool to investigate single molecules. We then introduce the modifications of the method to extend the measurement of forces and displacements to torques and angles, and to develop optical tweezers with single-molecule fluorescence detection capabilities. We discuss force and torque calibration of these instruments, their various modes of operation and most common experimental geometries. We describe the type of data obtained in each experimental design and their analyses. This description is followed by a survey of applications of these methods to the studies of protein-nucleic acid interactions, protein/RNA folding and molecular motors. We also discuss data reproducibility, the factors that lead to the data variability among different laboratories and the need to develop field standards. We cover the current limitations of the methods and possible ways to optimize instrument operation, data extraction and analysis, before suggesting likely areas of future growth.

DNA Manipulation and Single-Molecule Imaging

DNA replication, repair, and recombination in the cell play a significant role in the regulation of the inheritance, maintenance, and transfer of genetic information. To elucidate the biomolecular mechanism in the cell, some molecular models of DNA replication, repair, and recombination have been proposed. These biological studies have been conducted using bulk assays, such as gel electrophoresis. Because in bulk assays, several millions of biomolecules are subjected to analysis, the results of the biological analysis only reveal the average behavior of a large number of biomolecules. Therefore, revealing the elementary biological processes of a protein acting on DNA (e.g., the binding of protein to DNA, DNA synthesis, the pause of DNA synthesis, and the release of protein from DNA) is difficult. Single-molecule imaging allows the analysis of the dynamic behaviors of individual biomolecules that are hidden during bulk experiments. Thus, the methods for single-molecule imaging have provided new insights into almost all of the aspects of the elementary processes of DNA replication, repair, and recombination. However, in an aqueous solution, DNA molecules are in a randomly coiled state. Thus, the manipulation of the physical form of the single DNA molecules is important. In this review, we provide an overview of the unique studies on DNA manipulation and single-molecule imaging to analyze the dynamic interaction between DNA and protein.

TSGIT: An N- and C-terminal tandem tag system for purification of native and intein-mediated ligation-ready proteins

A large variety of fusion tags have been developed to improve protein expression, solubilization, and purification. Nevertheless, these tags have been combined in a rather limited number of composite tags and usually these composite tags have been dictated by traditional commercially-available expression vectors. Moreover, most commercially-available expression vectors include either N- or C-terminal fusion tags but not both. Here, we introduce TSGIT, a fusion-tag system composed of both N- and a C-terminal composite fusion tags. The system includes two affinity tags, two solubilization tags and two cleavable tags distributed at both termini of the protein of interest. Therefore, the N- and the C-terminal composite fusion tags in TSGIT are fully orthogonal in terms of both affinity selection and cleavage. For using TSGIT, we streamlined the cloning, expression, and purification procedures. Each component tag is selected to maximize its benefits toward the final construct. By expressing and partially purifying the protein of interest between the components of the TSGIT fusion, the full-length protein is selected over truncated forms, which has been a long-standing problem in protein purification. Moreover, due to the nature of the cleavable tags in TSGIT, the protein of interest is obtained in its native form without any additional undesired N- or C-terminal amino acids. Finally, the resulting purified protein is ready for efficient ligation with other proteins or peptides for downstream applications. We demonstrate the use of this system by purifying a large amount of native fluorescent mRuby3 protein and bacteriophage T7 gp2.5 ssDNA-binding protein.

Heterogeneous diffusion processes and nonergodicity with Gaussian colored noise in layered diffusivity landscapes

Heterogeneous diffusion processes (HDPs) with space-dependent diffusion coefficients D(x) are found in a number of real-world systems, such as for diffusion of macromolecules or submicron tracers in biological cells. Here, we examine HDPs in quenched-disorder systems with Gaussian colored noise (GCN) characterized by a diffusion coefficient with a power-law dependence on the particle position and with a spatially random scaling exponent. Typically, D(x) is considered to be centerd at the origin and the entire x axis is characterized by a single scaling exponent α. In this work we consider a spatially random scenario: in periodic intervals ("layers") in space D(x) is centerd to the midpoint of each interval. In each interval the scaling exponent α is randomly chosen from a Gaussian distribution. The effects of the variation of the scaling exponents, the periodicity of the domains ("layer thickness") of the diffusion coefficient in this stratified system, and the correlation time of the GCN are analyzed numerically in detail. We discuss the regimes of superdiffusion, subdiffusion, and normal diffusion realisable in this system. We observe and quantify the domains where nonergodic and non-Gaussian behaviors emerge in this system. Our results provide new insights into the understanding of weak ergodicity breaking for HDPs driven by colored noise, with potential applications in quenched layered systems, typical model systems for diffusion in biological cells and tissues, as well as for diffusion in geophysical systems.

An Approach to Ring Resonator Biosensing Assisted by Dielectrophoresis: Design, Simulation and Fabrication

The combination of extreme miniaturization with a high sensitivity and the potential to be integrated in an array form on a chip has made silicon-based photonic microring resonators a very attractive research topic. As biosensors are approaching the nanoscale, analyte mass transfer and bonding kinetics have been ascribed as crucial factors that limit their performance. One solution may be a system that applies dielectrophoretic forces, in addition to microfluidics, to overcome the diffusion limits of conventional biosensors. Dielectrophoresis, which involves the migration of polarized dielectric particles in a non-uniform alternating electric field, has previously been successfully applied to achieve a 1000-fold improved detection efficiency in nanopore sensing and may significantly increase the sensitivity in microring resonator biosensing. In the current work, we designed microring resonators with integrated electrodes next to the sensor surface that may be used to explore the effect of dielectrophoresis. The chip design, including two different electrode configurations, electric field gradient simulations, and the fabrication process flow of a dielectrohoresis-enhanced microring resonator-based sensor, is presented in this paper. Finite element method (FEM) simulations calculated for both electrode configurations revealed ∇E² values above 10¹⁷ V²m⁻³ around the sensing areas. This is comparable to electric field gradients previously reported for successful interactions with larger molecules, such as proteins and antibodies.

Half a century of bacteriophage lambda recombinase: In vitro studies of lambda exonuclease and Red-beta annealase

DNA recombination, replication, and repair are intrinsically interconnected processes. From viruses to humans, they are ubiquitous and essential to all life on Earth. Single‐strand annealing homologous DNA recombination is a major mechanism for the repair of double‐stranded DNA breaks. An exonuclease and an annealase work in tandem, forming a complex known as a two‐component recombinase. Redβ annealase and λ‐exonuclease from phage lambda form the archetypal two‐component recombinase complex. In this short review article, we highlight some of the in vitro studies that have led to our current understanding of the lambda recombinase system. We synthesize insights from more than half a century of research, summarizing the state of our current understanding. From this foundation, we identify the gaps in our knowledge and cast an eye forward to consider what the next 50 years of research may uncover.

Interferometric fluorescence cross correlation spectroscopy

Measuring transport properties like diffusion and directional flow is essential for understanding dynamics within heterogeneous systems including living cells and novel materials. Fluorescent molecules traveling within these inhomogeneous environments under the forces of Brownian motion and flow exhibit fluctuations in their concentration, which are directly linked to the transport properties. We present a method utilizing single photon interference and fluorescence correlation spectroscopy (FCS) to simultaneously measure transport of fluorescent molecules within aqueous samples. Our method, within seconds, measures transport in thousands of homogenous voxels (100 nm)³ and under certain conditions, eliminates photo-physical artifacts associated with blinking of fluorescent molecules. A comprehensive theoretical framework is presented and validated by measuring transport of quantum dots, associated with VSV-G receptor along cellular membranes as well as within viscous gels.

MutL sliding clamps coordinate exonuclease-independent Escherichia coli mismatch repair

A shared paradigm of mismatch repair (MMR) across biology depicts extensive exonuclease-driven strand-specific excision that begins at a distant single-stranded DNA (ssDNA) break and proceeds back past the mismatched nucleotides. Historical reconstitution studies concluded that Escherichia coli (Ec) MMR employed EcMutS, EcMutL, EcMutH, EcUvrD, EcSSB and one of four ssDNA exonucleases to accomplish excision. Recent single-molecule images demonstrated that EcMutS and EcMutL formed cascading sliding clamps on a mismatched DNA that together assisted EcMutH in introducing ssDNA breaks at distant newly replicated GATC sites. Here we visualize the complete strand-specific excision process and find that long-lived EcMutL sliding clamps capture EcUvrD helicase near the ssDNA break, significantly increasing its unwinding processivity. EcSSB modulates the EcMutL–EcUvrD unwinding dynamics, which is rarely accompanied by extensive ssDNA exonuclease digestion. Together these observations are consistent with an exonuclease-independent MMR strand excision mechanism that relies on EcMutL–EcUvrD helicase-driven displacement of ssDNA segments between adjacent EcMutH–GATC incisions.

The mechanics of MMR strand specific excision that begins at a distant ssDNA break are not yet clear. Here the authors have used multiple single molecule imaging techniques to visualize the behavior of MMR components on mismatched DNA substrates and reveal an exonuclease-independent mechanism for E.coli MMR.

Multiplexed single-molecule flow-stretching bead assay for DNA enzymology

Single-molecule techniques have been used successfully to visualize real-time enzymatic activities, revealing transient complex properties and heterogeneity of various biological events. Especially, conventional force spectroscopy including optical tweezers and magnetic tweezers has been widely used to monitor change in DNA length by enzymes with high spatiotemporal resolutions of ~ nanometers and ~ milliseconds. However, DNA metabolism results from coordination of a number of components during the processes, requiring efficient monitoring of a complex of proteins catalyzing DNA substrates. In this min-review, we will introduce a simple and multiplexed single-molecule assay to detect DNA substrates catalyzed by enzymes with high-throughput data collection. We conclude with a perspective of possible directions that enhance capability of the assay to reveal complex biological events with higher resolution.

Revealing the Thermodynamic Properties of Elementary Chemical Reactions at the Single-Molecule Level

An understanding of the thermodynamic properties of elementary chemical steps of a reaction is important for the development of fundamental reaction theories and for effective industrial practice. In this work, temperature-variable single-molecule fluorescence microscopy was employed to study a reversible redox chemical process and reveal the thermodynamics of chemical elementary reactions at a single-molecule level. Activation energies of pure elementary steps were measured on the level of single molecules and found to be heterogeneously distributed across the population of individual molecules. The activation parameters measured across the population of individual molecules also exhibited a compensation effect and an isokinetic relationship. These results constitute a new single-molecule-level perspective into a chemical reaction.

Noncanonical substrate preference of lambda exonuclease for 5'-nonphosphate-ended dsDNA and a mismatch-induced acceleration effect on the enzymatic reaction

Lambda exonuclease (λ exo) plays an important role in the resection of DNA ends for DNA repair. Currently, it is also a widely used enzymatic tool in genetic engineering, DNA-binding protein mapping, nanopore sequencing and biosensing. Herein, we disclose two noncanonical properties of this enzyme and suggest a previously undescribed hydrophobic interaction model between λ exo and DNA substrates. We demonstrate that the length of the free portion of the substrate strand in the dsDNA plays an essential role in the initiation of digestion reactions by λ exo. A dsDNA with a 5' non-phosphorylated, two-nucleotide-protruding end can be digested by λ exo with very high efficiency. Moreover, we show that when a conjugated structure is covalently attached to an internal base of the dsDNA, the presence of a single mismatched base pair at the 5' side of the modified base may significantly accelerate the process of digestion by λ exo. A detailed comparison study revealed additional π-π stacking interactions between the attached label and the amino acid residues of the enzyme. These new findings not only broaden our knowledge of the enzyme but will also be very useful for research on DNA repair and in vitro processing of nucleic acids.

A Tour de Force on the Double Helix: Exploiting DNA Mechanics To Study DNA-Based Molecular Machines

DNA is both a fundamental building block of life and a fascinating natural polymer. The advent of single-molecule manipulation tools made it possible to exert controlled force on individual DNA molecules and measure their mechanical response. Such investigations elucidated the elastic properties of DNA and revealed its distinctive structural configurations across force regimes. In the meantime, a detailed understanding of DNA mechanics laid the groundwork for single-molecule studies of DNA-binding proteins and DNA-processing enzymes that bend, stretch, and twist DNA. These studies shed new light on the metabolism and transactions of nucleic acids, which constitute a major part of the cell's operating system. Furthermore, the marriage of single-molecule fluorescence visualization and force manipulation has enabled researchers to directly correlate the applied tension to changes in the DNA structure and the behavior of DNA-templated complexes. Overall, experimental exploitation of DNA mechanics has been and will continue to be a unique and powerful strategy for understanding how molecular machineries recognize and modify the physical state of DNA to accomplish their biological functions.

A Transient and Flexible Cation-π Interaction Promotes Hydrolysis of Nucleic Acids in DNA and RNA Nucleases

Metal-dependent DNA and RNA nucleases are enzymes that cleave nucleic acids with great efficiency and precision. These enzyme-mediated hydrolytic reactions are fundamental for the replication, repair, and storage of genetic information within the cell. Here, extensive classical and quantum-based free-energy molecular simulations show that a cation-π interaction is transiently formed in situ at the metal core of Bacteriophage-λ Exonuclease (Exo-λ), during catalysis. This noncovalent interaction (Lys131-Tyr154) triggers nucleophile activation for nucleotide excision. Then, our simulations also show the oscillatory dynamics and swinging of the newly formed cation-π dyad, whose conformational change may favor proton release from the cationic Lys131 to the bulk solution, thus restoring the precatalytic protonation state in Exo-λ. Altogether, we report on the novel mechanistic character of cation-π interactions for catalysis. Structural and bioinformatic analyses support that flexible orientation and transient formation of mobile cation-π interactions may represent a common catalytic strategy to promote nucleic acid hydrolysis in DNA and RNA nucleases.

Structure and mechanism of the Red recombination system of bacteriophage λ

While much of this volume focuses on mammalian DNA repair systems that are directly involved in genome stability and cancer, it is important to still be mindful of model systems from prokaryotes. Herein we review the Red recombination system of bacteriophage λ, which consists of an exonuclease for resecting dsDNA ends, and a single-strand annealing protein (SSAP) for binding the resulting 3'-overhang and annealing it to a complementary strand. The genetics and biochemistry of Red have been studied for over 50 years, in work that has laid much of the foundation for understanding DNA recombination in higher eukaryotes. In fact, the Red exonuclease (λ exo) is homologous to Dna2, a nuclease involved in DNA end-resection in eukaryotes, and the Red annealing protein (Redβ) is homologous to Rad52, the primary SSAP in eukaryotes. While eukaryotic recombination involves an elaborate network of proteins that is still being unraveled, the phage systems are comparatively simple and streamlined, yet still encompass the fundamental features of recombination, namely DNA end-resection, homologous pairing (annealing), and a coupling between them. Moreover, the Red system has been exploited in powerful methods for bacterial genome engineering that are important for functional genomics and systems biology. However, several mechanistic aspects of Red, particularly the action of the annealing protein, remain poorly understood. This review will focus on the proteins of the Red recombination system, with particular attention to structural and mechanistic aspects, and how the lessons learned can be applied to eukaryotic systems.

Linearization and Labeling of Single-Stranded DNA for Optical Sequence Analysis

Genetic profiling would benefit from linearization of ssDNA through the exposure of the unpaired bases to gene-targeting probes. This is compromised by ssDNA's high flexibility and tendency to form self-annealed structures. Here, we demonstrate that self-annealing can be avoided through controlled coating with a cationic-neutral diblock polypeptide copolymer. Coating does not preclude site-specific binding of fluorescence labeled oligonucleotides. Bottlebrush-coated ssDNA can be linearized by confinement inside a nanochannel or molecular combing. A stretch of 0.32 nm per nucleotide is achieved inside a channel with a cross-section of 100 nm and a 2-fold excess of polypeptide with respect to DNA charge. With combing, the complexes are stretched to a similar extent. Atomic force microscopy of dried complexes on silica revealed that the contour and persistence lengths are close to those of dsDNA in the B-form. Labeling is based on hybridization and not limited by restriction enzymes. Enzyme-free labeling offers new opportunities for the detection of specific sequences.