Photoinduced Formation of Oxygen Vacancies on Mo-Incorporated WO3 for Direct Oxidation of Benzene to Phenol by Air

Photocatalysts with abundant oxygen vacancies (OVs) exhibit enhanced activity for the direct oxidation of benzene to phenol with O2, owing to their superior O2 activation and charge separation properties. However, OVs on metal oxide surfaces such as WO3 are susceptible to healing by oxygen-containing reactants or intermediates, leading to their irreversible deactivation. Herein, we demonstrate that incorporating Mo into the WO3 lattice effectively lowers the energy barrier for OV formation, promoting the dynamic formation of more abundant photoinduced OVs in situ on the surface during the photocatalytic reaction. These Mo-promoted photoinduced OVs are found to ensure the long-term sustainability of sufficient OVs under working conditions, enhancing photocatalytic performance and particularly its durability in the aerobic oxidation of benzene to phenol. These findings provide a straightforward strategy to overcome the issue of OV healing, enabling the sustainable operation of OV-rich photocatalysts for a range of emerging applications, even in O2-involved redox reactions.

Manipulation of Oxygen Vacancies and Charge Transfer for Enhancing Visible-Near-Infrared Photodegradation

Photocatalytic degradation technology has drawn extensive attention due to its ability to utilize light energy for pollutant degradation. However, the generation of superoxide and hydroxyl radicals under broad-spectrum light confronts significant challenges. Herein, N-GQDs/TiO2-x was rationally designed by adjusting oxygen vacancies (Ov) densities and constructing interfacial charge transfer channels. First, in situ XRD and EPR investigations disclosed that lowering the calcination temperature enabled the easy formation of rich oxygen vacancies. These vacancies introduced mid-gap states within the bandgap of TiO2-x, thereby facilitating efficient light absorption. Meanwhile, the increased Ov density enhanced electron transport and facilitated electron escape in TiO2-x. Moreover, an interfacial charge transfer channel was established between N-GQDs and TiO2-x, which effectively promoted the transfer of photogenerated carriers. Because of these structural and electronic modifications, both ·OH and ·O2- could be readily generated under visible and near-infrared light irradiations. Notably, under the irradiation of 470 nm LEDs, 99.3% of acid chrome blue K (AcbK) was degraded by N-GQDs/TiO2-x within 120 min. This work emphasizes the vital synergistic role of oxygen vacancies and interfacial charge-transfer channels, guiding the design of high-performance, full-spectrum photocatalysts for environmental applications.

Enhanced Chemiluminescence Induced by Natural Light-Driven MIL-100(Fe)/TiO2 for Dopamine Detection

Luminol-based chemiluminescence (CL) systems, as a powerful tool for bioanalysis, are limited owing to their weak CL intensity and self-decomposition of the classic oxidant H2O2. Herein, we introduced a new luminol CL enhancer, the natural light-driven photocatalyst MIL-100(Fe)/TiO2, for the selective determination of dopamine (DA). By employing MIL-100(Fe)/TiO2 for the first time as an efficient enhancer, the MIL-100(Fe)/TiO2-luminol CL intensity was 100 times higher than that of the classical H2O2-luminol system. The CL spectrum, UV-vis absorption spectroscopy, radical scavenger experiments, and electron spin resonance spectroscopy were utilized to investigate the possible CL mechanism of the MIL-100(Fe)/TiO2-luminol system. All of the results indicated that MIL-100(Fe)/TiO2 can generate reactive oxygen species under mild natural light, which could react rapidly with the luminol anion radical and result in direct CL emission. The sensitive plate for DA was developed based on its inhibiting effect on CL intensity, and the linear range between CL intensity and DA concentration was 100 nM-1000 μM with a detection limit of 16.7 μM (S/N = 3). This study successfully achieved a stable reactant that can directly trigger the CL of luminol without the need for additional oxidizing agents under mild natural light and offers new possibilities for photoinduced amplification technology.

Photocatalytic Oxidation of Benzene to Phenol with O2 over WO3 Treated by Vacuum-Sealed Annealing

Photocatalytic oxidation of benzene to phenol using molecular O2 is one of the most promising sustainable approaches for the green synthesis of phenol. Introducing oxygen vacancies (OVs) on semiconductor surfaces by defect engineering is a promising strategy to enhance the efficiency of benzene oxidation to produce phenol due to the unique functions of OVs in facilitating the charge separation and activation of molecular O2. Herein, a vacuum-sealed annealing strategy has been well developed to generate abundant surface OVs on semiconductors, such as WO3. The well-sealed quartz vial creates a well-controlled low-pressure condition for the formation of OVs without the need for external energy for maintaining the vacuum state. Moreover, the gaseous species generated during the thermal annealing process help mitigate stress-induced defects, particularly bulk defects. The vacuum-sealed annealed WO3 with sufficient OVs and reduced bulk defects shows a better photocatalytic performance in the one-step oxidation of benzene to phenol with O2, compared to the WO3 synthesized through thermal annealing in Ar and H2 atmospheres. The present vacuum-sealed annealing strategy is found to be further applicable to engineer a wide range of semiconducting photocatalysts with abundant OVs to optimize their properties for efficient photocatalysis and other OV-promoted systems.

Pressure-Induced Engineering of Surface Oxygen Vacancies on Metal Oxides for Heterogeneous Photocatalysis

Oxygen vacancies (OVs) spatially confined on the surface of metal oxide semiconductors are advantageous for photocatalysis, in particular, for O2-involved redox reactions. However, the thermal annealing process used to generate surface OVs often results in undesired bulk OVs within the metal oxides. Herein, a high pressure-assisted thermal annealing strategy has been developed for selectively confining desirable amounts of OVs on the surface of metal oxides, such as tungsten oxide (WO3). Applying a pressure of 1.2 gigapascal (GPa) on WO3 induces significant lattice compression, which would strengthen the W-O bonds and increase the diffusion activation energy for the migration of the O migration. This pressure-induced compression effectively inhibits the formation of bulk OVs, resulting in a high density of surface-confined OVs on WO3. These well-defined surface OVs significantly enhance the photocatalytic activation of O2, facilitating H2O2 production and aerobic oxidative coupling of amines. This strategy holds promise for the defect engineering of other metal oxides, enabling abundant surface OVs for a range of emerged applications.

Catalytic effects of iron adatoms in poly(para-phenylene) synthesis on rutile TiO2(110)

n-Armchair graphene nanoribbons (nAGNRs) are promising components for next-generation nanoelectronics due to their controllable band gap, which depends on their width and edge structure. Using non-metal surfaces for fabricating nAGNRs gives access to reliable information on their electronic properties. We investigated the influence of light and iron adatoms on the debromination of 4,4''-dibromo-p-terphenyl precursors affording poly(para-phenylene) (PPP as the narrowest GNR) wires through the Ullmann coupling reaction on a rutile TiO2(110) surface, which we studied by scanning tunneling microscopy and X-ray photoemission spectroscopy. The temperature threshold for bromine bond cleavage and desorption is reduced upon exposure to UV light (240-395 nm wavelength), but the reaction yield could not be improved. However, in the presence of codeposited iron adatoms, precursor debromination occurred even at 77 K, allowing for Ullmann coupling and PPP wire formation at 300-400 K, i.e., markedly lower temperatures compared to the conditions without iron adatoms. Furthermore, scanning tunneling spectroscopy data reveal that adsorbed PPP wires feature a band gap of ≈3.1 eV.

Oxygen vacancy-rich K-Mn3O4@CeO2 catalyst for efficient oxidation degradation of formaldehyde at near room temperature

Synthesis of catalysts with high catalytic degradation activity for formaldehyde (HCHO) at room temperature is highly desirable for indoor air quality control. Herein, a novel K-Mn3O4@CeO2 catalyst with excellent catalytic oxidation activity toward HCHO at near room temperature was reported. In particular, the K addition in K-Mn3O4@CeO2 considerably enhanced the oxidation activity, and importantly, 99.3 % conversion of 10 mL of a 40 mg/L HCHO solution at 30 °C for 14 h was achieved, with simultaneous strong cycling stability. Moreover, the addition of K species considerably influenced the chemical valence state of Mn from +4 (ε-MnO2) to +8/3 (Mn3O4) on the surface of CeO2, which obviously changed the tunnel structure and the number of oxygen vacancies. One part of K species is uniformly dispersed on K-Mn3O4@CeO2, and the other part exists in the tunnel structure of Mn3O4@CeO2, which is mainly used to balance the negative charge of the tunnel and prevent collapse of the structure, providing enough active sites for the catalytic oxidation of HCHO. We observed a phase transition from tunneled KMnO2 to Mn3O4 to tunneled MnO2 with the decreasing K+ content, in which K-Mn3O4@CeO2 exhibited higher HCHO oxidation activity. In addition, K-Mn3O4@CeO2 exhibited lower oxygen vacancy formation and HCHO adsorption energies in aqueous solution based on density functional theory calculations. This is because the K species provide more active oxygen species and richer oxygen vacancies on the surface of K-Mn3O4@CeO2, promote the mobility of lattice oxygen and the room-temperature reduction properties of oxygen species, and enhance the ability of the catalyst to replenish the consumed oxygen species. Finally, a possible HCHO catalytic oxidation pathway on the surface of K-Mn3O4@CeO2 catalyst is proposed.

Unraveling the Effects of Strain-Induced Defect Engineering on the Visible-Light-Driven Photodynamic Performance of Zn2SnO4 Nanoparticles Modified by Larger Barium Cations

Waterborne infections caused by pathogenic microorganisms represent serious health risks for humans. Ternary zinc-tin oxide nanoparticles have great potential as a cost-effective, environmentally friendly, and efficient candidate for waterborne infections; however, their photocatalytic and antibacterial effects are quite limited due to insufficient visible light absorption and rapid electron-hole recombination. Herein, barium-doped zinc stannate (Ba@ZTO) nanoparticles were synthesized by the hydrothermal method and used for the first time not only as antibacterial agents to prevent the spread of the harmful bacteria S. aureus and E. coli but also as photocatalysts to degrade the organic pollutant rhodamine B. Unexpectedly, Ba2+ ions exhibited compressive stress behavior instead of the predicted tensile stress when inserted into the ZTO crystal lattice, playing an active role in increasing oxygen vacancies within the crystal lattice and in the formation of hydroxyl radicals in the bulk solution and hydrogen peroxide (H2O2) radicals, significantly improving the photocatalytic and antibacterial properties. Strain-induced defects created by the insertion of larger barium ions into the ZTO lattice promote the increase of shallow traps for boosting photocatalytic/disinfection properties while suppressing deep-level traps that encourage nonradiative recombination. In essence, defect and strain engineering opens a promising route to achieve high disinfection efficiency by inducing larger cation ions under visible light in oxide-based materials.

Defect Chemistry of Titanium Dioxide (Rutile). Progress Toward Sustainable Energy

This work, which overviews defect chemistry of TiO2 (rutile), is focused on atomic-size structural defects that are thermodynamically reversible. Here it is shown that thermodynamics can be used in defect engineering of TiO2-based energy materials, such as photoelectrodes and photocatalysts. We show that surface segregation of defects leads to the building-up of new surface structures that are responsible for reactivity. Since rational design of surface properties requires in situ surface characterization in operational conditions, expansion of bulk defect chemistry to surface defect chemistry requires a defect-related surface-sensitive tool for in situ monitoring of defect-related properties at elevated temperatures corresponding to defect equilibria and in a controlled gas-phase environment. Here we show that the high-temperature electron probe is a defect-related surface-sensitive tool that is uniquely positioned to aid surface defect engineering and determine unequivocal surface properties. The related applied aspects are considered for photoelectrochemical water splitting and the performance of solid oxide fuel cells. Here we report that trail-blazing studies on in situ surface monitoring of TiO2 during gas/solid equilibration, along with in situ characterization of surface semiconducting properties, leads to the discovery of a segregation-induced low-dimensional surface structure that is responsible for stable performance of oxide semiconductors, such as TiO2, in operational conditions.

Generation of oxygen vacancies in CuO/TiO2 heterojunction induced by diatomite for highly efficient UV-Vis-IR driven photothermal catalytic oxidation of HCHO

Photothermal catalytic oxidation is a promising and sustainable method for the degradation of indoor formaldehyde (HCHO). However, the excessively high surface temperature of existing photothermal catalysts during catalysis hinders the effective adsorption and degradation of formaldehyde under static conditions. Catalyst loading and oxygen vacancies (OVs) modulation are commonly employed strategies to reduce the photothermal catalytic temperature and enhance the efficiency of photothermal catalytic oxidation. In this work, a p-n type CuO/TiO2 heterojunction is successfully loaded onto diatomite using a wet precipitation method. Under the irradiation of a 300W xenon lamp, the prepared composite material achieved a 100% removal rate of HCHO within 2 h, with a 98% conversion rate to CO2, surpassing the performance of both individual photocatalysts and thermocatalysts. Additionally, by adjusting conditions such as light irradiation and temperature, we have demonstrated that this material exhibits synergistic photothermal catalytic properties. Based on HRTEM, XPS, Raman, and EPR analyses, the introduction of diatomite as a catalyst support was shown to effectively increase the number of OVs. Experimental results, along with O2-TPD, photoelectrochemical characterization, and radical detection, demonstrate that the presence of OVs enhances the oxidative efficiency of both photocatalysis and thermocatalysis, as well as the UV-Vis-IR photothermal catalytic performance. The ternary composite material generates weak hydroxyl (•OH) and superoxide (•O2-) radical under high-temperature with dark conditions, indicating its catalytic oxidation activity under this condition. The increase in temperature and the expansion of the spectral range both enhance the generation of these radicals. In summary, this work demonstrates that the use of diatomite as a support increases the material's specific surface area and OVs content, thereby enhancing adsorption and photothermal catalysis. It elucidates the enhanced catalytic degradation mechanism of this mineral-based photothermal catalyst.

Antibiofilm Activity of PDMS/TiO2 against Candida glabrata through Inhibited Hydrophobic Recovery

Coatings with antibiofilm properties are desirable for biomedical applications. Titanium dioxide (TiO2) has been explored as an antimicrobial agent in materials development primarily due to it being an excellent photocatalyst. Candida glabrata (C. glabrata) is an emerging human fungal pathogen with known high resistance to oxidative stress. Here, we fabricated a polydimethylsiloxane/titanium dioxide (PDMS/TiO2) nanocomposite coating and tested its antibiofilm activities against C. glabrata. The resulting nanocomposite exhibited >50% reduction in C. glabrata biofilm formation with 2.5 wt % TiO2 loading, even in the dark. Through ROS detection and surface characterization, the antibiofilm activity was attributed to the synergistic interaction of TiO2 nanoparticles with the PDMS matrix, which resulted in the impediment of hydrophobic recovery. This work provides a design strategy to develop antibiofilm coatings against C. glabrata.

Active Sites for CO2 Hydrogenation to Methanol: Mechanistic Insights and Reaction Control

Catalytic CO2 conversion to methanol is a promising way to extenuate the adverse effects of CO2 emission, global warming and energy shortage. Understanding the fundamental features of CO2 activation and hydrogenation at the molecular level is essential for carbon utilization and sustainable chemical production in the current climate crisis. This review explores the recent advances in understanding the design of catalysts with desired active sites, including single-atom, dual-atom, interface, defects/vacancies and promoters/dopants. We focused on the design of various catalytic systems to enhance their catalytic performances by stabilizing active metal in a catalyst, identifying the unique structure of active species, and engineering coordination environments of active sites. Mechanistic insights provided by advanced operando and in situ spectroscopies were also discussed. Moreover, the review highlights the key factors affecting active sites and reaction mechanisms, such as local environments, oxidation states, and metal-support interactions. By integrating recent advancements and relating knowledge gaps, this review aims to endow an inclusive overview of the field and guide future research toward more efficient and selective catalysts for CO2 hydrogenation to methanol.

Silver-promoted ceramic conversion treatment of Ti6Al4V alloy and its mechanical performance

In this paper, the Ti6Al4V alloy surface was modified via ceramic conversion treatment (CCT) with or without a pre-deposited silver layer. After characterizing the surface morphologies, microstructure and phase constituents of the ceramic oxide layer formed at 620 °C, we investigated the surface hardness and the cross-sectional nano-hardness profile under the oxide layer. The static load-bearing capacity of the oxide layers was examined by applying discrete loads via a Vickers indenter and observing the indentations. A scratch test was used to evaluate the load-bearing capacity and the adhesion/cohesion of the oxide layers. The wettability of the surface changed due to the incorporation of silver and the change of surface morphology. Reciprocating friction and wear test was used to assess the tribological properties. Small and dispersed silver nanoparticles and clusters were found in the oxide layer of the Ag pre-deposited Ti6Al4V samples, and they had much better tribological properties in terms of reduced coefficient of friction and wear volume. With the assistance of silver, the efficiency of the CCT was significantly improved.

Surface Defect-Induced Specific Catalysis Activates 100% Selective Sensing toward Amine Gases at Room Temperature

Achieving selective sensing toward target volatile organic compound gases is of vital importance in the fields of air quality assessment, food freshness evaluation, and diagnosis of patients via exhaled breath. However, chemiresistive sensors that exhibit specificity like biological enzymes in a complex environment are rare. Herein, we developed a strategy of optimizing oxygen vacancy structures in tin oxides to induce specific catalysis, activating 100% selective sensing toward amine gases at room temperature. In situ technologies and theoretical calculations reveal that the "donor-receptor" coordination between nitrogen atoms from amine molecules and bridging oxygen vacancies (OVBri)-induced electron-deficient center is the essence of specific catalysis and provides the bridge from the surface oxidation reaction to electrophysical characteristics evolution, which allows the sensor to exhibit amine-specific sensing behavior, even in gas mixtures. Moreover, OVBri enhances the selectivity by enabling a room-temperature sensing pathway where lattice oxygens participate in catalytic oxidation for amine molecules, resulting in record-high sensing values: 19,938.92 toward 100 ppm of triethylamine, 15,236.78 toward trimethylamine, and 123.41 toward diethylamine. Our findings illustrate the feasibility of designing specific active sites through defect engineering and can contribute to the advancement of highly selective sensors based on catalytic processes.

Influence of Domain Size and Support Composition on the Reducibility of SiO2 and TiO2 Supported Tungsten Oxide Clusters

Supported tungsten oxides are widely used in a variety of catalytic reactions. Depending on the support, the cluster size, oxidation state, reducibility and speciation of the tungsten oxides can widely differ. When promoted with a platinum group metal, the resulting spillover of hydrogen may facilitate the reduction of supported tungsten oxide species, depending on the support. High resolution scanning transmission electron microscopy imaging showed nanometer scale WO x clusters were synthesized on SiO2 whereas highly dispersed species were formed on TiO2. Results from H2-temperature-programmed reduction showed the presence of Pd lowered the initial reduction temperature of SiO2-supported WO x species but interestingly did not affect that of TiO2-supported WO x . X-ray photoelectron and absorption spectroscopies showed the W atoms in SiO2-supported WO x species reduce from a +6 oxidation state to primarily +5 after thermal treatment in 5% H2, while the fraction of W in the +5 oxidation state was relatively unaffected by reduction treatment of TiO2-supported WO x . The unusual behavior of TiO2-supported WO x was explained by quantum chemical calculations that reveal the lack of change in the oxidation state of W is attributed to charge delocalization on the surface atoms of the titania support, which does not occur on silica. Moreover, modeling results at <600 K in the presence of H2 suggest the formation of Brønsted acid sites, and the absence of Lewis acid sites, on larger aggregates of WO x on silica and all cluster sizes on titania. These results provide experimental and theoretical insights into the nature of supported tungsten oxide clusters under conditions relevant to various catalytic reactions.

Highly Dispersed Ni Atoms and O3 Promote Room-Temperature Catalytic Oxidation

Transition metal oxides are promising catalysts for catalytic oxidation reactions but are hampered by low room-temperature activities. Such low activities are normally caused by sparse reactive sites and insufficient capacity for molecular oxygen (O2) activation. Here, we present a dual-stimulation strategy to tackle these two issues. Specifically, we import highly dispersed nickel (Ni) atoms onto MnO2 to enrich its oxygen vacancies (reactive sites). Then, we use molecular ozone (O3) with a lower activation energy as an oxidant instead of molecular O2. With such dual stimulations, the constructed O3-Ni/MnO2 catalytic system shows boosted room-temperature activity for toluene oxidation with a toluene conversion of up to 98%, compared with the O3-MnO2 (Ni-free) system with only 50% conversion and the inactive O2-Ni/MnO2 (O3-free) system. This leap realizes efficient room-temperature catalytic oxidation of transition metal oxides, which is constantly pursued but has always been difficult to truly achieve.

Study on the Sodium-Doped Titania Interface-Type Memristor

Memristors integrated into a crossbar-array architecture (CAA) are promising candidates for analog in-memory computing accelerators. However, the relatively low reliability of the memristor device and sneak current issues in CAA remain the main obstacles. Alkali ion-based interface-type memristors are promising solutions for implementing highly reliable memristor devices and neuromorphic hardware. This interface-type device benefits from self-rectifying and forming-free resistive switching (RS), and exhibits relatively low variation from device to device and cycle to cycle. In a previous report, we introduced an in situ grown Na/TiO2 memristor using atomic layer deposition (ALD) and proposed a RS mechanism from experimentally measured Schottky barrier modulation. Self-rectifying RS characteristics were observed by the asymmetric distribution of Na dopants and oxygen vacancies as the Ti metal used as the adhesion layer for the bottom electrode diffuses over the Pt electrode at 250 °C during the ALD process and is doped into the TiO2 layer. Here, we theoretically verify the modulation of the Schottky barrier at the TiO2/Pt electrode interface by Na ions. This study fabricated a Pt/Na/TiO2/Pt memristor device and confirmed its self-rectifying RS characteristics and stable retention characteristics for 24 h at 85 °C. Additionally, this device exhibited relative standard deviations of 27 and 7% in the high and low resistance states, respectively, in terms of cycle-to-cycle variation. To verify the RS mechanism, we conducted density functional theory simulations to analyze the impact of Na cations at interstitial sites on the Schottky barrier. Our findings can contribute to both fundamental understanding and the design of high-performance memristor devices for neuromorphic computing.

Photochemical tuning of dynamic defects for high-performance atomically dispersed catalysts

Developing active and stable atomically dispersed catalysts is challenging because of weak non-specific interactions between catalytically active metal atoms and supports. Here we demonstrate a general method for synthesizing atomically dispersed catalysts via photochemical defect tuning for controlling oxygen-vacancy dynamics, which can induce specific metal-support interactions. The developed synthesis method offers metal-dynamically stabilized atomic catalysts, and it can be applied to reducible metal oxides, including TiO2, ZnO and CeO2, containing various catalytically active transition metals, including Pt, Ir and Cu. The optimized Pt-DSA/TiO2 shows unprecedentedly high photocatalytic hydrogen evolution activity, producing 164 mmol g-1 h-1 with a turnover frequency of 1.27 s-1. Furthermore, it generates 42.2 mmol gsub-1 of hydrogen via a non-recyclable-plastic-photoreforming process, achieving a total conversion of 98%; this offers a promising solution for mitigating plastic waste and simultaneously producing valuable energy sources.

Oxygen vacancy-rich Ag/CuO nanoarray mesh fabricated by laser ablation for efficient bacterial inactivation

The contamination of drinking water by microbes is a critical health concern, underscoring the need for safe, reliable, and efficient methods to treat pathogenic microorganisms. While most sterilization materials are available in powder form, this presents safety risks and challenges in recycling. Herein, this study reports the preparation of an innovative copper oxide supported silver monolithic nanoarray mesh with abundant oxygen vacancies (Ag/CuO-VO) by laser ablation. The instantaneous high temperature caused by laser ablation preserves the material's original structure while generating oxygen vacancies on the CuO surface. The Ag/CuO-VO mesh demonstrated a remarkable ability to inactivate over 99% of Escherichia coli (E. Coli) within 20 min. The oxygen vacancies in the Ag/CuO-VO enhance interactions between oxygen species and the Ag/CuO-VO, leading to the accumulation of large amounts of reactive oxygen species (ROS). The generated ROS effectively disrupt both layers of the bacterial cell wall - the peptidoglycan and the phospholipid - as confirmed by Fourier Transform Infrared (FTIR) spectroscopy, culminating in cell death. This research presents a monolithic material capable of inactivating pathogenic microorganisms efficiently, offering a significant advancement in water sterilization technology.

High-Reliability and Self-Rectifying Alkali Ion Memristor through Bottom Electrode Design and Dopant Incorporation

Ionic memristor devices are crucial for efficient artificial neural network computations in neuromorphic hardware. They excel in multi-bit implementation but face challenges like device reliability and sneak currents in crossbar array architecture (CAA). Interface-type ionic memristors offer low variation, self-rectification, and no forming process, making them suitable for CAA. However, they suffer from slow weight updates and poor retention and endurance. To address these issues, the study demonstrated an alkali ion self-rectifying memristor with an alkali metal reservoir formed by a bottom electrode design. By adopting Li metal as the adhesion layer of the bottom electrode, an alkali ion reservoir was formed at the bottom of the memristor layer by diffusion occurring during the atomic layer deposition process for the Na:TiO2 memristor layer. In addition, Al dopant was used to improve the retention characteristics by suppressing the diffusion of alkali cations. In the memristor device with optimized Al doping, retention characteristics of more than 20 h at 125 °C, endurance characteristics of more than 5.5 × 105, and high linearity/symmetry of weight update characteristics were achieved. In reliability tests on 100 randomly selected devices from a 32 × 32 CAA device, device-to-device and cycle-to-cycle variations showed low variation values within 81% and 8%, respectively.

Vacancy-induced catalytic mechanism for alcohol electrooxidation on nickel-based electrocatalyst

Owing to outstanding performances, nickel-based electrocatalysts are commonly used in electrochemical alcohol oxidation reactions (AORs), and the active phase is usually vacancy-rich nickel oxide/hydroxide (NiOx Hy ) species. However, researchers are not aware of the catalytic role of atom vacancy in AORs. Here, we study vacancy-induced catalytic mechanisms for AORs on NiOx Hy species. As to AORs on oxygen-vacancy-poor β-Ni(OH)2 , the only redox mediator is electrooxidation-induced electrophilic lattice oxygen species, which can only catalyze the dehydrogenation process (e.g., the electrooxidation of primary alcohol to carboxylic acid) instead of the C-C bond cleavage. Hence, vicinal diol electrooxidation reaction involving the C-C bond cleavage is not feasible with oxygen-vacancy-poor β-Ni(OH)2 . Only through oxygen vacancy-induced adsorbed oxygen-mediated mechanism, can oxygen-vacancy-rich NiOx Hy species catalyze the electrooxidation of vicinal diol to carboxylic acid and formic acid accompanied with the C-C bond cleavage. Crucially, we examine how vacancies and vacancy-induced catalytic mechanisms work during AORs on NiOx Hy species.

Monolithic Catalyst of Ni Foam-Supported MnOx for Boosting Magnetocaloric Oxidation of Toluene

Catalytic oxidation has been considered an effective technique for volatile organic compound degradation. Development of metal foam-based monolithic catalysts coupling electromagnetic induction heating (EMIH) with efficiency and low energy is critical yet challenging in industrial applications. Herein, a Mn18.2-NF monolithic catalyst prepared by electrodeposition exhibited superior toluene catalytic activity under EMIH conditions, and the temperature of 90% toluene conversion decreased by 89 °C compared to that in resistance furnace heating. Relevant characterizations proved that the skin effect induced by EMIH encouraged activation of gaseous oxygen, leading to superior low-temperature redox properties of Mn18.2-NF under the EMIH condition. In situ Fourier transform infrared spectroscopy results showed that skin effect-induced activation of oxidizing species further accelerated the conversion of intermediates. As a result, the Mn18.2-NF monolithic catalyst under EMIH demonstrated remarkable performance for the toluene oxidation, surpassing the conventional nonprecious metal catalyst and other reported monolithic catalysts.

Gas-phase hydrogenation of furfural into value-added chemicals: The critical role of metal-based catalysts

Furfural (FF: aldehyde derivable from lignocellulosic biomass) has been widely recognized as a versatile building block for eco-friendly and sustainable applications to reduce industrial reliance on fossil-fuel carbon sources. Hydrogenation of FF, in particular, is recognized as one of the most effective routes for producing various value-added chemicals (e.g., furfuryl alcohol and 2-methylfuran). The gas-phase FF hydrogenation reaction offers economic and environmental advantages over its liquid-phase counterpart in conversion efficiency, product selectivity, and kinetics. The operation of the former does not require high hydrogen pressures or hazardous solvents while not generating undesirable by-products (due to reduced selectivity toward the ring-opening reaction). In this context, the utility of noble and non-noble metal catalyst systems has been recognized for their potential to induce effective FF hydrogenation in the gas phase. The present review addresses current understandings and recent developments in research on gas-phase FF hydrogenation and the factors governing the performance of metal-based catalysts (e.g., materials and surface chemistry; conversion efficiency; product selectivity; and the mechanisms, pathways, and kinetics of the associated reactions). Current shortcomings and research avenues are also discussed to help establish a roadmap for future development of the gas-phase FF hydrogenation technology and associated disciplines. Overall, the present review is expected to offer much-needed insights into the scalability of metal-based catalytic systems for efficient FF hydrogenation in the gas phase.

Surface Oxygen Vacancy-Rich Co3O4 Nanowires as an Effective Catalyst of Luminol-H2O2 Chemiluminescence for Sensitive Immunoassay

Oxygen vacancy is one intrinsic defect in metal oxide materials. Interestingly, we herein found that the surface oxygen vacancy can significantly enhance the catalytic activity of Co3O4 nanowires in the luminol-H2O2 chemiluminescence (CL) reaction. 0.1 ng/mL Co3O4 nanowires containing 51.3% surface oxygen vacancies possessed ca. 2.5-fold catalytic activity of free Co2+ (the best metal ionic catalyst for the luminol-H2O2 CL reaction). The superior catalytic efficiency is attributed to the enhanced adsorption of H2O2 by surface oxygen vacancies, which in turn accelerates the cleavage of O-O bonds and generates •OH radicals. More importantly, the surface oxygen vacancy-rich Co3O4 nanowires retained about 90% catalytic activity after modification with antibodies. The surface oxygen vacancy-rich Co3O4 nanowires were used to label the secondary antibody, and one sandwich-type CL immunoassay of carcinoembryonic antigen was established. The detection limit was 0.3 ng/mL with a linear range of 1-10 ng/mL. This proof-of-concept work proves that surface oxygen vacancy-rich Co3O4 nanowires are suitable for labeling biomolecules in CL bioanalysis and biosensing.

Spontaneous generation of singlet oxygen on microemulsion-derived manganese oxides with rich oxygen vacancies for efficient aerobic oxidation

Developing innovative catalysts for efficiently activating O2 into singlet oxygen (1O2) is a cutting-edge field with the potential to revolutionize green chemical synthesis. Despite its potential, practical implementation remains a significant challenge. In this study, we design a series of nitrogen (N)-doped manganese oxides (Ny-MnO2, where y represents the molar amount of the N precursor used) nanocatalysts using compartmentalized-microemulsion crystallization followed by post-calcination. These nanocatalysts demonstrate the remarkable ability to directly produce 1O2 at room temperature without the external fields. By strategically incorporating defect engineering and interstitial N, the concentration of surface oxygen atoms (Os) in the vicinity of oxygen vacancy (Ov) reaches 51.1% for the N55-MnO2 nanocatalyst. This feature allows the nanocatalyst to expose a substantial number of Ov and interstitial N sites on the surface of N55-MnO2, facilitating effective chemisorption and activation of O2. Verified through electron paramagnetic resonance spectroscopy and reactive oxygen species trapping experiments, the spontaneous generation of 1O2, even in the absence of light, underscores its crucial role in aerobic oxidation. Density functional theory calculations reveal that an increased Ov content and N doping significantly reduce the adsorption energy, thereby promoting chemisorption and excitation of O2. Consequently, the optimized N55-MnO2 nanocatalyst enables room-temperature aerobic oxidation of alcohols with a yield surpassing 99%, representing a 6.7-fold activity enhancement compared to ε-MnO2 without N-doping. Furthermore, N55-MnO2 demonstrates exceptional recyclability for the aerobic oxidative conversion of benzyl alcohol over ten cycles. This study introduces an approach to spontaneously activate O2 for the green synthesis of fine chemicals.

Ultrafast many-body bright-dark exciton transition in anatase TiO2

The momentum-forbidden dark excitons can have a pivotal role in quantum information processing, Bose-Einstein condensation, and light-energy harvesting. Anatase TiO2 with an indirect band gap is a prototypical platform to study bright to momentum-forbidden dark exciton transition. Here, we examine, by GW plus the real-time Bethe-Salpeter equation combined with the nonadiabatic molecular dynamics (GW + rtBSE-NAMD), the many-body transition that occurs within 100 fs from the optically excited bright to the strongly bound momentum-forbidden dark excitons in anatase TiO2. Comparing with the single-particle picture in which the exciton transition is considered to occur through electron-phonon scattering, within the GW + rtBSE-NAMD framework, the many-body electron-hole Coulomb interaction activates additional exciton relaxation channels to notably accelerate the exciton transition in competition with other radiative and nonradiative processes. The existence of dark excitons and ultrafast bright-dark exciton transitions sheds insights into applications of anatase TiO2 in optoelectronic devices and light-energy harvesting as well as the formation process of dark excitons in semiconductors.

Enhanced immobilization of Arsenic(III) and Auto-oxidation to Arsenic(V) by titanium oxide (TiO2), due to Single-Atom vacancies and oxyanion formation

Pollution control of As(III), a naturally occurring carcinogen, has recently gained a global attention, while due to the dominance of neutral H3AsO3 over a wide pH range, As(III) immobilization by most minerals is not efficient as As(V) immobilization. TiO2 shows promise for controlling As(III) pollution, and herein, a comprehensive study about As(III) adsorption by TiO2 and oxyanion formation is conducted by means of DFT + D3 methods. Both anatase and rutile are effective for As(III) adsorption, while As(III) adsorption affinities differ significantly and are -1.48 and -3.79 eV for pristine surfaces, ascend to -3.85 and -5.08 eV for O vacancies, and further to -5.37 and -5.26 eV for Ti vacancies, respectively. The bidentate binuclear complexes dominate for pristine surfaces, and O vacancies prefer OAs insertion into TiO2 lattice, while for Ti vacancies, all As(III) centers are auto-oxidized to As(V). Ti-3d, O-2p or/and As-4p rather than other orbitals contribute significantly to As adsorption, and O and Ti vacancies promote adsorption through stronger orbital hybridization. The superior adsorption for Ti vacancies originates from As(V) formation instead of bonding interactions. The formation of As oxyanions, which may occur spontaneously at pristine surfaces and is greatly promoted by O and Ti vacancies, enhances As(III) adsorption pronouncedly and becomes a viable strategy for As(III) immobilization. H2AsO3- and HAsO32- dominate for pristine surfaces and O vacancies, and for Ti vacancies, H2AsO4- and HAsO42- dominate over anatase whereas AsO43- also makes an important contribution over rutile. Results rationalize experimental observations available, and provide significantly new insights about the migration, bioavailability and fate of As(III) over TiO2 surfaces that facilitate the exploration of scavengers for As and other pollutants.

High-speed mapping of surface charge dynamics using sparse scanning Kelvin probe force microscopy

Unraveling local dynamic charge processes is vital for progress in diverse fields, from microelectronics to energy storage. This relies on the ability to map charge carrier motion across multiple length- and timescales and understanding how these processes interact with the inherent material heterogeneities. Towards addressing this challenge, we introduce high-speed sparse scanning Kelvin probe force microscopy, which combines sparse scanning and image reconstruction. This approach is shown to enable sub-second imaging (>3 frames per second) of nanoscale charge dynamics, representing several orders of magnitude improvement over traditional Kelvin probe force microscopy imaging rates. Bridging this improved spatiotemporal resolution with macroscale device measurements, we successfully visualize electrochemically mediated diffusion of mobile surface ions on a LaAlO3/SrTiO3 planar device. Such processes are known to impact band-alignment and charge-transfer dynamics at these heterointerfaces. Furthermore, we monitor the diffusion of oxygen vacancies at the single grain level in polycrystalline TiO2. Through temperature-dependent measurements, we identify a charge diffusion activation energy of 0.18 eV, in good agreement with previously reported values and confirmed by DFT calculations. Together, these findings highlight the effectiveness and versatility of our method in understanding ionic charge carrier motion in microelectronics or nanoscale material systems.

Spatially Separated Active Sites Enable Selective CO Oxidation Reaction on Oxide Catalyst

The search for efficient non-noble-metal catalysts able to perform selective oxidation reactions is of great importance, with relevance to many catalytic processes. However, this is often hampered because the origin of the selectivity remains controversial, particularly for reactions catalyzed by oxides. Here, combining high-pressure surface imaging techniques and theoretical calculations, we identify that spatially separated active sites for O2 activation and H2 adsorption on an ultrathin Mn3O4 surface enable selective oxidation of CO over H2. Theoretical calculations reveal that Mn-O pairs for H2 dissociation are separated from Mn-Mn pairs for the formation of adsorbed O2* so that H2 has to surmount much higher barriers for both H2 dissociation and H diffusion while CO can directly react with O2* following the Eley-Rideal process. Our study sheds light on the atomic-level understanding of the surface structure-dependent selective oxidation reaction on oxide catalysts.

Traces of Potassium Induce Restructuring of the Anatase TiO2(001)-(1×4) Surface from a Reactive to an Inert Structure

Reconstruction of solid surfaces is generally accompanied by changes in surface activities. Here, via a combined experimental and theoretical study, we successfully identified that a trace amount of potassium dopant restructures the mineral anatase TiO2(001) single-crystal surface from an added molecule (ADM) termination to an added oxygen (AOM) one without changing the (1×4) periodicity. The anatase TiO2(001)-(1×4)-ADM surface terminated with 4-fold coordinated Ti4c and 2-fold coordinated O2c sites is (photo)catalytically active, whereas the anatase TiO2(001)-(1×4)-AOM surface terminated with O2c and inaccessible 5-fold coordinated Ti5c sites is inert. These results unveiled a mechanism of dopant-induced transformation from a reactive to an inert TiO2(001)-(1×4) surface, which unifies the existing arguments about the surface structures and (photo)catalytic activity of anatase TiO2(001)-(1×4).

Design Strategies for Perovskite-Type High-Entropy Oxides with Applications in Optics

It is essential and challenging to develop advanced ceramic materials with thermal stability and high reflectivity for optical fields. Encouragingly, recent breakthroughs and significant advances in high-entropy ceramics have made high-entropy oxides a potential candidate material for optical applications. Therefore, in this study, we analyzed the effect of lattice distortion on the design of high-reflectivity, high-entropy oxides using first-principles calculations and aberration-corrected microscopy. In order to optimize the optical properties of the materials, a series of novel perovskite-type high-entropy oxides, (LaxK0.4-xCa0.2Sr0.2Ba0.2)TiO3+δ (x = 0.1, 0.15, 0.2, 0.25, 0.3), were designed and synthesized using solid-state sintering based on the charge conservation principle and bond energy principle. When the content of La in the A-site element was 30%, the optical reflectivity reached 94% by suppressing the oxygen vacancy. Furthermore, we have successfully prepared a series of coatings by air spraying based on the regulation of the mass ratio of resin and powder. Compared to the uncoated substrate, the backside temperature can be reduced by 41%. This work provides a feasible design route with the first clear guidelines for highly reflective high-entropy ceramic materials and enables highly stable material design in multielement spaces.

Oxygen vacancies induced band gap narrowing for efficient visible-light response in carbon-doped TiO2

The band gap of rutile TiO2 has been narrowed, via the formation of oxygen vacancies (OVs) during heat treatment in carbon powder (cHT) with embedding TiO2 coatings. The narrowed band gap efficiently improves the visible light response of TiO2 coatings, to further enhance the visible-light-driven photocatalytic activity. The change in OVs during cHT has been studied by manipulation of cHT temperature and time. The effect of OVs on the band structure of nonstoichiometric TiO2-x has been further calculated by first-principles calculations. With raising the temperature, SEM images show that the nano-size fiber-like structure forms on the surface of TiO2 coatings, and the amount of the fiber-like structure significantly increases and their size changes from nano to micro under 800 °C, contributing to cause an increase in accessible surface area. The UV-Vis results reveal that the band gap of TiO2 has been narrowed during cHT, due to the formed oxygen vacancies. The XPS results further confirm that the formation of surface defects including OVs, and the XPS depth profile further shows the decreased relative amount of O whereas increased relative amount of carbon. Notably, after cHT for TiO2 coatings, the photocatalytic activity first increases then decreases with raising the temperature, achieving approximately 3 times at 850 °C. The first-principles calculation suggest that the OVs in TiO2 coatings with localized electrons could facilitate the band gap narrowing, further favoring to enhance the photocatalytic activity under visible light.

Probing surface properties of organic molecular layers by scanning tunneling microscopy

In view of the relevance of organic thin layers in many fields, the fundamentals, growth mechanisms, and dynamics of thin organic layers, in particular thiol-based self-assembled monolayers (SAMs) on Au(111) are systematically elaborated. From both theoretical and practical perspectives, dynamical and structural features of the SAMs are of great intrigue. Scanning tunneling microscopy (STM) is a remarkably powerful technique employed in the characterization of SAMs. Numerous research examples of investigation about the structural and dynamical properties of SAMs using STM, sometimes combined with other techniques, are listed in the review. Advanced options to enhance the time resolution of STM are discussed. Additionally, we elaborate on the extremely diverse dynamics of various SAMs, such as phase transitions and structural changes at the molecular level. In brief, the current review is expected to supply a better understanding and novel insights regarding the dynamical events happening in organic SAMs and how to characterize these processes.

α-Fe2O3-supported Co3O4 nanoparticles to construct highly active interfacial oxygen vacancies for ozone decomposition

Ozone pollution has become one of the most concerned environmental issue. Developing low-cost and efficient catalysts is a promising alternative for ozone decomposition. This work presents a creative strategy that using α-Fe₂O₃-supported Co₃O₄ nanoparticles for constructing interfacial oxygen vacancies (Vo) to remove ozone. The efficiency of Co₃O₄/α-Fe₂O₃ was superior to that of pure α-Fe₂O₃ by nearly two times for 200-ppm ozone removal after 6-h reaction at 25 °C, which is ascribed to the highly active interfacial Vo. X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy suggest that the Fe³⁺-Vo-Co²⁺ was formed when Co₃O₄ was loaded in α-Fe₂O₃. Furthermore, the density functional theory (DFT) calculations reveal the desorption and electron transfer ability of intermediate peroxide (O₂^2-) on Fe³⁺-Vo-Co²⁺ are higher than the Vo from other regions. In situ diffuse reflectance Fourier transform (DRIFT) spectroscopy also demonstrate the higher conversion rate of O₂^2- on Co₃O₄/α-Fe₂O₃. Base on the intermediates detected, we propose a recycle mechanism of interfacial Vo for ozone removal: O₂^2- is quickly converted to O₂^- and transformed into O₂ on interfacial Vo. Moreover, O₂-temperature-programmed desorption (TPD), H₂-temperature-programmed reduction (TPR), and electrochemical impedance spectroscopy (EIS) reveal that the oxygen mobility, reducibility, and conductivity of Co₃O₄/α-Fe₂O₃ are greatly superior to those of α-Fe₂O₃, which is contributed to the conversion of O₂^2-. Consequently, our proposed strategy effectively enhances the activity and stability of the bimetallic transition oxides for ozone decomposition.

Highly Selective Transformation of Biomass Derivatives to Valuable Chemicals by Single-Atom Photocatalyst Ni/TiO2

Selective CC cleavage of the biomass derivative glycerol under mild conditions is recognized as a promising yet challenging synthesis route to produce value-added chemicals. Here, a highly selective catalyst for the transformation of glycerol to the high-value product glycolaldehyde is presented, which is composed of nickel single atoms confined to the surface of titanium dioxide. Driven by light, the catalyst operates under ambient conditions using air as a green oxidant. The optimized catalyst shows a selectivity of over 60% to glycolaldehyde, resulting in 1058 µmol g_Cat ^-1  h^-1 production rate, and ≈3 times higher turnover number than NiO_x -nanoparticle-decorated TiO₂ photocatalyst. Diverse operando and in situ spectroscopies unveil the unique function of the Ni single atom, which can significantly promote oxygen adsorption, work as an electron sink, and accelerate the production of superoxide radicals, thereby improving the selectivity toward glycolaldehyde over other by-products.

Defective Metal Oxides: Lessons from CO2 RR and Applications in NOx RR

Sluggish reaction kinetics and the undesired side reactions (hydrogen evolution reaction and self-reduction) are the main bottlenecks of electrochemical conversion reactions, such as the carbon dioxide and nitrate reduction reactions (CO₂ RR and NO₃ RR). To date, conventional strategies to overcome these challenges involve electronic structure modification and modulation of the charge-transfer behavior. Nonetheless, key aspects of surface modification, focused on boosting the intrinsic activity of active sites on the catalyst surface, are yet to be fully understood. Engingeering of oxygen vacancies (OVs) can tune surface/bulk electronic structure and improve surface active sites of electrocatalysts. The continuous breakthroughs and significant progress in the last decade position engineering of OVs as a potential technique for advancing electrocatalysis. Motivated by this, the state-of-the-art findings of the roles of OVs in both the CO₂ RR and the NO₃ RR are presented. The review starts with a description of approaches to constructing and techniques for characterizing OVs. This is followed by an overview of the mechanistic understanding of the CO₂ RR and a detailed discussion on the roles of OVs in the CO₂ RR. Then, insights into the NO₃ RR mechanism and the potential of OVs on NO₃ RR based on early findings are highlighted. Finally, the challenges in designing CO₂ RR/NO₃ RR electrocatalysts and perspectives in studying OV engineering are provided.

Comparative Study of α- and β-MnO2 on Methyl Mercaptan Decomposition: The Role of Oxygen Vacancies

As a representative sulfur-containing volatile organic compounds (S-VOCs), CH₃SH has attracted widespread attention due to its adverse environmental and health risks. The performance of Mn-based catalysts and the effect of their crystal structure on the CH₃SH catalytic reaction have yet to be systematically investigated. In this paper, two different crystalline phases of tunneled MnO₂ (α-MnO₂ and β-MnO₂) with the similar nanorod morphology were used to remove CH₃SH, and their physicochemical properties were comprehensively studied using high-resolution transmission electron microscope (HRTEM) and electron paramagnetic resonance (EPR), H₂-TPR, O₂-TPD, Raman, and X-ray photoelectron spectroscopy (XPS) analysis. For the first time, we report that the specific reaction rate for α-MnO₂ (0.029 mol g^-1 h^-1) was approximately 4.1 times higher than that of β-MnO₂ (0.007 mol g^-1 h^-1). The as-synthesized α-MnO₂ exhibited higher CH₃SH catalytic activity towards CH₃SH than that of β-MnO₂, which can be ascribed to the additional oxygen vacancies, stronger surface oxygen migration ability, and better redox properties from α-MnO₂. The oxygen vacancies on the catalyst surface provided the main active sites for the chemisorption of CH₃SH, and the subsequent electron transfer led to the decomposition of CH₃SH. The lattice oxygen on catalysts could be released during the reaction and thus participated in the further oxidation of sulfur-containing species. CH₃SSCH₃, S⁰, SO₃^2-, and SO₄^2- were identified as the main products of CH₃SH conversion. This work offers a new understanding of the interface interaction mechanism between Mn-based catalysts and S-VOCs.

Elucidating NO x Surface Chemistry at the Anatase (101) Surface in TiO2 Nanoparticles

Understanding NO _x chemistry at titania nanoparticle surfaces is important for photocatalytic environmental remediation processes. We focus on this problem and put forward an experimental-computational approach based on vibrational spectroscopy grounds. Temperature-dependent IR experiments of NO _x adsorption on shape-engineered nanoparticle (101) anatase surfaces are paired with power spectra obtained from Born-Oppenheimer trajectories. Then, the harmonic versus anharmonic vibrational frequencies of several adsorption scenarios are directly compared with the IR experiments. We conclude that molecules are adsorbed mainly by the N-end side and both the intermolecular interactions between adsorbed molecules and (NO)₂ dimer formation are responsible for the main NO adsorption spectroscopic features. We also investigate the spectroscopy and the mechanism of formation on defective anatase surfaces of the long-lived greenhouse gas N₂O.

Photolysis versus Photothermolysis of N2O on a Semiconductor Surface Revealed by Nonadiabatic Molecular Dynamics

Identifying photolysis and photothermolysis during a photochemical reaction has remained challenging because of the highly non-equilibrium and ultrafast nature of the processes. Using state-of-the-art ab initio adiabatic and nonadiabatic molecular dynamics, we investigate N₂O photodissociation on the reduced rutile TiO₂(110) surface and establish its detailed mechanism. The photodecomposition is initiated by electron injection, leading to the formation of a N₂O^- ion-radical, and activation of the N₂O bending and symmetric stretching vibrations. Photothermolysis governs the N₂O dissociation when N₂O^- is short-lived. The dissociation is activated by a combination of the anionic excited state evolution and local heating. A thermal fluctuation drives the molecular acceptor level below the TiO₂ band edge, stabilizes the N₂O^- anion radical, and causes dissociation on a 1 ps timescale. As the N₂O^- resonance lifetime increases, photolysis becomes dominant since evolution in the anionic excited state activates the bending and symmetric stretching of N₂O, inducing the dissociation. The photodecomposition occurs more easily when N₂O is bonded to TiO₂ through the O rather than N atom. We demonstrate further that a thermal dissociation of N₂O can be realized by a rational choice of metal dopants, which enhance p-d orbital hybridization, facilitate electron transfer, and break N₂O spontaneously. By investigating the charge dynamics and lifetime, we provide a fundamental atomistic understanding of the competition and synergy between the photocatalytic and photothermocatalytic dissociation of N₂O and demonstrate how N₂O reduction can be controlled by light irradiation, adsorption configuration, and dopants, enabling the design of high-performance transition-metal oxide catalysts.

Synergistic effect of photo-thermal oxidation for a low concentration of HCHO over Bi3+-TiO2/MnFeOx catalysts at ambient temperature

Formaldehyde (HCHO) has been one of the important air pollutants, and the effective removal of HCHO at ambient temperature has been a big challenge. In this work, the synergistic effect of photo-thermal oxidation with Bi³⁺-TiO₂/MnFeO_x for a low concentration of HCHO was investigated. MnFeO_x was synthesized by the complexation method (CM) and co-precipitation (CP), and TiO₂ with Bi³⁺ doping supported on MnFeO_x was prepared by using the hydrothermal method to obtain a higher oxidation performance. The results demonstrated an excellent oxidation activity of MnFeO_x (CM) for HCHO at ambient temperature, attributed to the morphology effect (large surface areas and small crystal sizes), the large absorption of oxygen, and the interaction and oxygen vacancy formed between MnO₂ and FeO_x. Although Bi³⁺-TiO₂/MnFeO_x showed a similar result as MnFeO_x at 48 h, the oxidation activities for HCHO were improved prominently under photo-thermal oxidation at 12 h. The improvement was ascribed to the synergistic effect of Bi³⁺-TiO₂ and MnFeO_x with surface adsorbed oxygen, and more generated reactive oxygen species on the surface. In particular, 2 wt% Bi³⁺-TiO₂/MnFeO_x displayed the highest activity (90.2%) and good stability (5 cycles), and the HCHO average conversion was increased from 46.2 to 58.2% at 12 h. The feasible oxidation mechanism and reaction pathway were also interpreted. This work provides a new insight for the development of photocatalysts supported on transition metal oxides to oxidize HCHO at ambient temperature.

Mesoporous Ti4O7 Spheres with Enhanced Zinc-Anchoring Effect for High-Performance Zinc-Nickel Batteries

Zinc-nickel batteries are promising competitors for next-generation power supply due to their benefits of high safety, high working voltage, and attractive rate performance. However, their practical applications are plagued by their poor cycling performance, stemming from uneven redistribution of zinc during cycling that results in dendrite formation and shape changes of the electrode. In this work, mesoporous Ti₄O₇ microspheres are prepared and are employed as additives of a zinc anode. Notably, the presence of mesopores provides abundant chemisorption sites for Zn(OH)₄^2- ions, inhibiting severe zinc redistribution in the electrode. Moreover, due to the good electrical conductivity and mesopores that serve as ion diffusion channels, the reaction reactivity and reversibility of the zinc electrode are greatly facilitated. As a result, the fabricated zinc-nickel battery with mesoporous Ti₄O₇ additives (ms-Ti₄O₇) exhibits an enhanced discharge capacity and a significantly prolonged cycling life. Even at a current of 10 A (∼138 mA cm^-2), the ms-Ti₄O₇-modified anode demonstrates stable operation for longer than 718 h (700 cycles) with a discharge voltage of 1.2 V, which is much longer than those of a ZnO anode (192 h, 117 cycles) and a Ti₄O₇-particle (p-Ti₄O₇)-modified battery (590 h, 443 cycles). Furthermore, due to the anchoring effect for Zn(OH)₄^2- and the uniform electric field, the effect of mesoporous Ti₄O₇ on inhibiting dendrite formation and shape change of the zinc electrode is highlighted.

Coordination unsaturation of vanadium nitride quantum dots boosts low-temperature aerobic oxidation of thiophenic sulfides

Aerobic oxidative desulfurization (AODS) promises a sustainable alternative technology for diesel desulfurization, which necessitates the efficient aerobic oxidation of thiophenic sulfides under mild conditions to minimize energy input, yet being longstandingly plagued by the grand challenge in low-temperature activation of triplet oxygen. Here we synthesize vanadium nitride quantum dots on graphene to controllably create coordination-unsaturated edge/corner V sites for boosting the AODS reaction. The catalyst activates the reaction at 70 °C, and is two orders of magnitude more active than the best V-based catalysts. We demonstrate through computational studies that the low-coordinated edge/corner V sites can effectively activate oxygen and adsorb sulfides to lower the activation barrier, dramatically enhancing the activity. The catalyst achieves deep AODS of real diesel at 80 °C with negligible attenuation in successive reuses, which highlights its attractive industrial potential. These findings provide scientific and practical insights to develop high-performance catalysts for a sustainable AODS process.

Oxygen Spillover Effect at Cu/Fe2O3 Heterointerfaces to Enhance Oxygen Electrocatalytic Reactions for Rechargeable Zn-Air Batteries

Rational design and synthesis of high-performance electrocatalysts for the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) are critical for practical application of Zn-air batteries (ZABs). In this work, the bifunctional composite Cu-Fe₂O₃/PNC was prepared by a simple and effective wet-hydrothermal coupled dry-annealing synthesis strategy. The Cu-Fe₂O₃/PNC displayed excellent catalytic activity in ORR and OER with a potential difference of 0.63 V. More importantly, the ZAB assembled with Cu-Fe₂O₃/PNC exhibited a high-power density of 138.00 mW cm^-2 and an excellent long-term cyclability. X-ray photoelectron spectroscopy (XPS) demonstrated that the excellent performance is due to the strong electronic interaction between Cu and Fe₂O₃ that arises as a result of the fast electron transfer through the Cu-O-Fe bond and the higher concentration of surface oxygen vacancies. Meanwhile, the spillover factor Bsp/2zF of Cu/PNC and Cu-Fe₂O₃/PNC obtained by the rotating disk experiment was 1.00 × 10^-7 and 1.10 × 10^-7 cm²·s^-1, respectively, indicating that the oxygen spillover effect between Cu and Fe₂O₃ lowers the energy barrier, increases the number of active sites, and alters the rate-determining reaction step. This work demonstrated the significant potential of Cu-Fe₂O₃/PNC in energy conversion and storage applications, providing a new perspective for the rational design of bifunctional electrocatalysts.

An unconstrained approach to systematic structural and energetic screening of materials interfaces

From grain boundaries and heterojunctions to manipulating 2D materials, solid-solid interfaces play a key role in many technological applications. Understanding and predicting properties of these complex systems present an ongoing and increasingly important challenge. Over the last few decades computer simulation of interfaces has become vastly more powerful and sophisticated. However, theoretical interface screening remains based on largely heuristic methods and is strongly biased to systems that are amenable to modelling within constrained periodic cell approaches. Here we present an unconstrained and generally applicable non-periodic screening approach for systematic exploration of material's interfaces based on extracting and aligning disks from periodic reference slabs. Our disk interface method directly and accurately describes how interface structure and energetic stability depends on arbitrary relative displacements and twist angles of two interacting surfaces. The resultant detailed and comprehensive energetic stability maps provide a global perspective for understanding and designing interfaces. We confirm the power and utility of our method with respect to the catalytically important TiO2 anatase (101)/(001) and TiO2 anatase (101)/rutile (110) interfaces.