Nanomaterials: a membrane-based synthetic approach

Morphological advances and innovations in conjugated polymer films for high-performance gas sensors

Conjugated polymers (CPs) are considered one of the most important gas-sensing materials due to their unique features, combining the benefits of both metals and semiconductors, along with their outstanding mechanical properties and excellent processability. However, CPs with conventional morphological structures, such as largely amorphous and bulky matrices, face limitations in practical applications because of their inferior charge transport characteristics, low surface area, and insufficient sensitivity. Therefore, the design and development of novel morphological nanostructures in CPs have attracted significant attention as a promising strategy for improving morphological and electrical characteristics, thereby enabling a considerable increase in the sensing performance of corresponding gas sensors. Numerous CP nanostructures have been developed and implemented for high-performance gas sensors. Highlighting the morphological advances and bottlenecks of these nanostructures is crucial for providing an overview of developing trends, potential strategies, and emerging areas for the future development of CP nanostructures in the field. In this regard, this study describes state-of-the-art CP nanostructures, emphasizing their attractive morphological and electrical characteristics to help readers and researchers better understand emerging trends, promising future directions, and key obstacles for the application of CP nanostructure-based gas sensors. The most crucial aspects of CP nanostructures, including advanced preparation techniques, morphological properties, and sensing characteristics, are discussed and assessed in detail. Moreover, development strategies and perspectives for achieving high sensing efficiency in CP nanostructure-based flexible and wearable sensors are summarized and emphasized.

Direct analysis of engineered iron nanotubes and platinum nanorods: A challenge for single particle inductively coupled plasma mass spectrometry

The use of inductively coupled plasma mass spectrometry in single particle mode (SP-ICP-MS) for the characterization of micro and nanostructured materials is a growing field of research. In this work, the possibility of expanding the boundaries to anisotropic structures including solid Pt-nanorods and hollowed Fe2O3-nanotubes is presented. The obtained structures are evaluated by scanning electron microscopy (SEM), high-resolution electron microscopy (HR-TEM) and SP-ICP-MS techniques. Solid Pt-nanorods (191 ± 18 nm in diameter) showed important heterogeneity in their length, ranging 42-72 nm, due to sample preparation difficulties. The analysis by SP-ICP-MS confirmed the presence of two different populations of Pt/nanorods at 19 ± 4 fg and 41 ± 5 fg, respectively, yielding a mean value of 23 ± 12 fg Pt/rod and a length range of 38-67 nm, in agreement with TEM measurements. In the case of the two different sized double-walled Fe2O3-nanotubes of 900 nm and 1800 nm in length, the SP-ICP-MS measurements provided results of 16 ± 10 and 25 ± 4 fg Fe/nanotube, respectively. Out of this data, the layer thickness of the Fe2O3 nanotube wall was calculated, reporting values ranging between 20 ± 6 and 17 ± 4 nm, respectively, in good agreement with the TEM estimations (18 ± 4 nm). Considering the complexity of the highly anisotropic nano and micro-structures analyzed, SP-ICP-MS technique can be seen as a novel tool to evaluate the fabrication process of non-spherical nanomaterials as well as the sample preparation strategies, complementary to microscopic techniques and with higher sample throughput.

Nanostructured conductive polymers: synthesis and application in biomedicine

Conductive polymers (CPs), distinguished by their sp2-hybridized carbon backbone, offer remarkable electrical conductivity while maintaining the advantageous mechanical flexibility and processing characteristics typical of organic polymers. Compared to their bulk counterparts, nanostructured CPs exhibit unique physicochemical properties, such as large surface areas and shortened charge/mass transport pathways, making them promising candidates for various applications. This mini review explores various synthesis methodologies for nanostructured CPs, including electrospinning, hard templating, and soft templating techniques, while elucidating their advantages and disadvantages. Additionally, the burgeoning biomedical applications of nanostructured CPs are highlighted, including drug delivery, neural electrodes and interfaces, nerve regeneration, and biosensing, demonstrating their potential to significantly advance contemporary biomedical science.

Going for a Spin: Simultaneously Pulling and Spinning Microrods Speeds Transport through Collagen Matrices

Magnetic drug targeting requires particles to move through the complex viscoelastic environments of tissues and biological fluids. However, these environments often inhibit particle motion, making it difficult for magnetically guided particles to reach their intended targets. Magnetic microrods are easy to grow and manipulate, but experience significant hindrance to transport in complex, tortuous, tissue-like environments. Simple magnetic force translation ("pulling" or "pushing") is often insufficient or inefficient for long-range transport of microrods through such environments. Designing microrods capable of rotating while being pulled with a magnetic force may enable rods to overcome hindrances to transport. We present microrods with orthogonally magnetized segments, actuated by simultaneous magnetic force and magnetic torque. By simultaneously pulling and rotating our rods we create smooth-surfaced magnetic drilling microrods (MDMRs) capable of enhanced motion through protein-dense biopolymers. We model magnetic force and torque on MDMRs, characterize MDMR dynamics during transport, and demonstrate enhanced MDMR transport through protein-dense matrices in vitro.

Lignosulfonate as a versatile regulator for the mediated synthesis of Ag@AgCl nanocubes

The remarkable catalytic activity, optical properties, and electrochemical behavior of nanomaterials based on noble metals (NM) are profoundly influenced by their physical characteristics, including particle size, morphology, and crystal structure. Effective regulation of these parameters necessitates a refined methodology. Lignin, a natural aromatic compound abundant in hydroxyl, carbonyl, carboxyl, and sulfonic acid groups, has emerged as an eco-friendly surfactant, reducing agent, and dispersant, offering the potential to precisely control the particle size and morphology of NM-based nanomaterials. In this study, lignosulfonate (LS) was utilized as a versatile regulator efficient in the capacities of reduction, capping, and dispersal for the synthesis of Ag@AgCl nanocubes. LS concentration and reaction time were identified as crucial factors impacting the ultimate particle size and morphology of Ag@AgCl nanocubes. The Ag@AgCl nanocubes, with a particle size of 30 ± 10 nm, were successfully synthesized under the optimized conditions of a 1.0 mM LS concentration and a 1-hour reaction period. As a reducing agent, LS facilitates the conversion of silver ions originating from AgCl to silver nanoparticles, following an etching-like mechanism that yields AgCl seeds with a uniform cubic particle size. The obtained Ag@AgCl nanocubes exhibit a stable morphology and excellent dispersion characteristics.

Fabrication of high-density vertical CNT arrays using thin porous alumina template for biosensing applications

This paper explores the process of forming arrays of vertically oriented carbon nanotubes (CNTs) localized on metal electrodes using thin porous anodic alumina (PAA) on a solid substrate. On a silicon substrate, a titanium film served as the electrode layer, and an aluminium film served as the base layer in the initial film structure. A PAA template was formed from the Al film using two-step electrochemical anodizing. Two types of CNT arrays were then synthesized by catalytic chemical vapor deposition. By electrochemically depositing Ni into the PAA pores in two different regimes-constant potential (DC deposition) and alternating current (AC deposition)-catalyst nanoparticles for CNT deposition are formed. It is shown that the size parameters of the CNTs and the proposed CNT growth mechanism depend on the size of the catalyst particles and their localization in the pores of the PAA. Thus, a Ti/PAA/Ni/CNT-based nanocomposite multilayered structure was formed on the Si substrate. Through the use of X-ray diffraction analysis, linear voltammetry, atomic force microscopy, and scanning electron microscopy, the morphological, structural, and electrochemical characteristics of the produced nanocomposite material were investigated. It is shown that the obtained nanostructures can be used for the fabrication of CNT electrodes for biosensing applications.

Bismuth-based nanoparticles and nanocomposites: synthesis and applications

In the vast landscape of materials science, bismuth emerges as a compelling element with unique properties and diverse applications. Its intriguing characteristics and advancements in nanotechnology have propelled bismuth-based nanoparticles to the forefront of scientific exploration, promising breakthroughs in various disciplines. This comprehensive review explores diverse methods for synthesizing bismuth-based nanoparticles and nanocomposites, ranging from conventional approaches such as hydrothermal and sol-gel to innovative techniques such as microwave-assisted, microemulsion, and green synthesis. The latter includes unique processes such as laser ablation, chemical vapor deposition methods, combustion as well as surface-mediated and bacterium-based synthesis. Each method's strengths, weaknesses, and specifications are critically examined. Further, the review delves into the adaptable applications of bismuth-based nanoparticles and nanocomposites, emphasizing their antibacterial activity, contribution to photovoltaic studies, potential in supercapacitors, and efficacy in photocatalytic degradations of various organic dyes. The objective of this review is to present a thorough summary of the synthesis methodologies and applications of bismuth-based nanoparticles and nanocomposites, offering valuable insights for researchers and professionals engaged in the burgeoning field of nanoparticles.

Controlled Ligand-Free Growth of Free-Standing CsPbBr3 Perovskite Nanowires

Metal halide perovskite nanowires are widely studied due to their unique electronic and optical characteristics, making them promising for light emitting and detection applications. We developed a ligand-free method to grow vertically aligned free-standing CsPbBr3 nanowires from anodized aluminum oxide nanopore substrates. Here, we investigate the growth process using in situ microscopy with ultraviolet and visible light excitation, revealing a highly dynamic process with pronounced fluorescence at locations where high-density free-standing nanowires could be found. The yield of the growth is strongly improved by using a growth reactor with controlled N2 flow, increasing from 17 to 60%. We systematically investigated the growth dependence on the temperature and N2 flow rate and identified optimal parameters at 70 °C and 0.8 L/min, respectively. The improved control over the growth of free-standing nanowires expands opportunities for their integration into optoelectronic devices.

Composite Track-Etched Membranes: Synthesis and Multifaced Applications

Composite track-etched membranes (CTeMs) emerged as a versatile and high-performance class of materials, combining the precise pore structures of traditional track-etched membranes (TeMs) with the enhanced functionalities of integrated nanomaterials. This review provides a comprehensive overview of the synthesis, functionalization, and applications of CTeMs. By incorporating functional phases such as metal nanoparticles and conductive nanostructures, CTeMs exhibit improved performance in various domains. In environmental remediation, CTeMs effectively capture and decompose pollutants, offering both separation and detoxification. In sensor technology, they have the potential to provide high sensitivity and selectivity, essential for accurate detection in medical and environmental applications. For energy storage, CTeMs may be promising in enhancing ion transport, flexibility, and mechanical stability, addressing key issues in battery and supercapacitor performance. Biomedical applications may benefit from the versality of CTeMs, potentially supporting advanced drug delivery systems and tissue engineering scaffolds. Despite their numerous advantages, challenges remain in the fabrication and scalability of CTeMs, requiring sophisticated techniques and meticulous optimization. Future research directions include the development of cost-effective production methods and the exploration of new materials to further enhance the capabilities of CTeMs. This review underscores the transformative potential of CTeMs across various applications and highlights the need for continued innovation to fully realize their benefits.

Light-Assisted Fabrication of Hierarchical Azopolymer Structures Using the Breath Figure Method and AAO Templates

Hierarchical polymer structures have garnered widespread application across various fields owing to their distinct surface properties and expansive surface areas. Conventional hierarchical polymer structures, however, often lack postfabrication scalability and spatial selectivity. In this study, we propose a novel strategy to prepare light-assisted hierarchical polymer structures using azopolymers (PAzo), the breath figure method, and anodic aluminum oxide (AAO) templates. Initially, the breath figure PAzo films are prepared by dripping a PAzo chloroform solution onto glass substrates in a high-humidity environment. The AAO templates are then placed on the breath figure PAzo film. Upon ultraviolet (UV) light exposure, the azobenzene groups in the azopolymers undergo trans-cis photoisomerization. This process causes the glass transition temperature (Tg) of the PAzo to become lower than room temperature, allowing the azopolymer to enter the nanopores of the AAO templates. The hierarchical azopolymer structures are then formed by using a sodium hydroxide solution to remove the templates. Furthermore, exploring the effects of PAzo concentration and UV light exposure duration on the film morphology reveals optimized conditions for hierarchical structure formation. Additionally, the water contact angles of these polymer structures are measured. The hierarchical PAzo structures exhibit higher hydrophobicity compared with the flat PAzo films and the PAzo breath figure films. Finally, patterned breath figure films can be prepared using designed photomasks, demonstrating the method's capability for spatial selectivity.

Progress of Mesoporous Silica Coated Gold Nanorods for Biological Imaging and Cancer Therapy

For unique surface plasmon absorption and fluorescence characteristics, gold nanorods have been developed and widely employed in the biomedical field. However, limitations still exist due their low specific surface area, instability and tendency agglomerate in cytoplasm. Mesoporous silica materials have been broadly applied in field of catalysts, adsorbents, nanoreactors, and drug carriers due to its unique mesoporous structure, highly comparative surface area, good stability and biocompatibility. Therefore, coating gold nanorods with a dendritic mesopore channels can effectively prevent particle agglomeration, while increasing the specific surface area and drug loading efficiency. This review discusses the advancements of GNR@MSN in synthetic process, bio-imaging technique and tumor therapy. Additionally, the further application of GNR@MSN in imaging-guided treatment modalities is explored, while its promising superior application prospect is highlighted. Finally, the issues related to in vivo studies are critically examined for facilitating the transition of this promising nanoplatform into clinical trials.

Capillary-Assisted Assembly of Soft Conductive Polymer Nanopillar/Tube Arrays and Applications

Nanopillar/tube arrays have emerged as encouraging platforms, possessing remarkable advantages, including large specific areas and highly aligned orientations. Despite the progress of nano/microfabrication technologies, facile and controllable fabrication of conductive polymer nanopillar/tube arrays remains challenging. In this study, we demonstrate that the air-liquid interfacial self-assembly can be extended to obtain three-dimensional nanostructured arrays. A smart and novel method is proposed for preparing uniform conductive polymer nanopillar/tube arrays by a template-mediated interfacial synthesis approach. By utilizing capillary force, precise control processes of the nanostructure and patterned structure can be easily realized. Furthermore, a transfer strategy is devised, allowing for scalable fabrication and expansion of the applicability. Applications, including antibacterial surfaces and actuators, have been demonstrated. We extend the air-liquid interfacial synthesis technique as a powerful and universal strategy for producing ordered nanopillar/tube arrays and show the great potential of soft nanostructured arrays as advanced platforms in diverse applications.

Single-Crystal Silicon Nanotubes, Hollow Nanocones, and Branched Nanotube Networks

We report a general approach for the synthesis of single-crystal silicon nanotubes, involving epitaxial deposition of silicon shells on germanium nanowire templates followed by removal of the germanium template by selective wet etching. By exploiting advances in the synthesis of germanium nanowires, we were able to rationally tune the nanotube internal diameters (5-80 nm), wall thicknesses (3-12 nm), and taper angles (0-9°) and additionally demonstrated branched silicon nanotube networks. Field effect transistors fabricated from p-type nanotubes exhibited a strong gate effect, and fluid transport experiments demonstrated that small molecules could be electrophoretically driven through the nanotubes. These results demonstrate the suitability of silicon nanotubes for the design of nanoelectrofluidic devices.

A focused review on hyaluronic acid contained nanofiber formulations for diabetic wound healing

The significant clinical challenge presented by diabetic wounds is due to their impaired healing process and increased risk of complications. It is estimated that a foot ulcer will develop at some point in the lives of 15-25 % of diabetic patients. Serious complications, including infection and amputation, are often led to by these wounds. In the field of tissue engineering and regenerative medicine, nanofiber-based wound dressings have emerged in recent years as promising therapeutic strategies for diabetic wound healing. Hyaluronic acid (HA), among various nanofiber materials, has gained considerable attention due to its unique properties, including biocompatibility, biodegradability, and excellent moisture retention capacity. By promoting skin hydration and controlling inflammation, a crucial role in wound healing is played by HA. Wounds are also helped to heal faster by HA through the regulation of inflammation levels and signaling the body to build more blood vessels in the damaged area. Great potential in various applications, including wound healing, has been shown by the development and use of nanofiber formulations in medicine. However, challenges and limitations associated with nanofibers in medicine exist, such as reproducibility, proper characterization, and biological evaluation. By providing a biomimetic environment that enhances re-epithelialization and facilitates the delivery of active substances, nanofibers promote wound healing. In accelerating wound healing, promising results have been shown by HA-contained nanofiber formulations in diabetic wounds. Key strategies employed by these formulations include revascularization, modulation of the inflammation microenvironment, delivery of active substances, photothermal nanofibers, and nanoparticle-loaded fabrics. Particularly crucial is revascularization as it restores blood flow to the wound area, promoting healing. Wound healing can also be enhanced by modulating the inflammation microenvironment through controlling inflammation levels. Future perspectives in this field involve addressing the current challenges and limitations of nanofiber technology and further optimizing HA-contained nanofiber formulations for improved efficacy in diabetic wound healing. This includes exploring new fabrication techniques, enhancing the biocompatibility and biodegradability of nanofibers, and developing multifunctional nanofibers for targeted drug delivery. Not only does writing a review in the field of nanofiber-based wound dressings, particularly those containing hyaluronic acid, allow us to consolidate our current knowledge and understanding but also broadens our horizons. An opportunity is provided to delve deeper into the intricacies of this innovative therapeutic strategy, explore its potential and limitations, and envision future directions. By doing so, a contribution can be made to the ongoing advancements in tissue engineering and regenerative medicine, ultimately improving the quality of life for patients with diabetic wounds.

Recent Advances of Seed-Mediated Growth of Metal Nanoparticles: from Growth to Applications

Unprecedented advances in metal nanoparticle synthesis have paved the way for broad applications in sensing, imaging, catalysis, diagnosis, and therapy by tuning the optical properties, enhancing catalytic performance, and improving chemical and biological properties of metal nanoparticles. The central guiding concept for regulating the size and morphology of metal nanoparticles is identified as the precise manipulation of nucleation and subsequent growth, often known as seed-mediated growth methods. However, since the growth process is sensitive not only to the metal seeds but also to capping agents, metal precursors, growth solution, growth/incubation time, reductants, and other influencing factors, the precise control of metal nanoparticle morphology is multifactorial. Further, multiple reaction parameters are entangled with each other, so it is necessary to clarify the mechanism by which each factor precisely regulates the morphology of metal nanoparticles. In this review, to exploit the generality and extendibility of metal nanoparticle synthesis, the mechanisms of growth influencing factors in seed-mediated growth methods are systematically summarized. Second, a variety of critical properties and applications enabled by grown metal nanoparticles are focused upon. Finally, the current progress and offer insights on the challenges, opportunities, and future directions for the growth and applications of grown metal nanoparticles are reviewed.

Developing a Simple, Effective, and Quick Process to Make Silver Nanowires with a High Aspect Ratio

A growing number of people are interested in using silver nanowires (AgNWs) as potential transparent and conductive materials. The production of high-performance and high-throughput AgNWs was successfully optimized in this work using a one-step, straightforward, and reproducible modified polyol approach. The factors influencing the morphology of the silver nanowires have undergone extensive research in order to determine the best-optimized approach for producing AgNWs. The best AgNW morphology, with a length of more than 50 m and a diameter of less than 35 nm (aspect ratio is higher than 1700), was discovered to be produced by a mixture of 44 mM AgNO3, 134 mM polyvinylpyrrolidone (PVP) (Mo.Wt 40,000), and 2.4 mM KCl at 160 °C with a stirring rate of 100 rpm. With our improved approach, the overall reaction time was cut from almost an hour with the conventional polyol method to a few minutes. Scanning electron microscopy (SEM), X-ray diffraction (XRD), and ultraviolet (UV) spectroscopy were used to characterize AgNWs. The resultant AgNWs' dispersion was cleaned using a centrifuge multiple times before being deposited on glass and PET substrates at room temperature. In comparison to commercial, delicate, and pricey indium-doped tin oxide (ITO) substrates, the coated samples displayed exceptionally good sheet resistance of 17.05/sq and optical haze lower than 2.5%. Conclusions: Using a simple one-step modified polyol approach, we were able to produce reproducible thin sheets of AgNWs that made excellent, flexible transparent electrodes.

Alumina Ceramic Nanofibers: An Overview of the Spinning Gel Preparation, Manufacturing Process, and Application

As an important inorganic material, alumina ceramic nanofibers have attracted more and more attention because of their excellent thermal stability, high melting point, low thermal conductivity, and good chemical stability. In this paper, the preparation conditions for alumina spinning gel, such as the experimental raw materials, spin finish aid, aging time, and so on, are briefly introduced. Then, various methods for preparing the alumina ceramic nanofibers are described, such as electrospinning, solution blow spinning, centrifugal spinning, and some other preparation processes. In addition, the application of alumina ceramic nanofibers in thermal insulation, high-temperature filtration, catalysis, energy storage, water restoration, sound absorption, bioengineering, and other fields are described. The wide application prospect of alumina ceramic nanofibers highlights its potential as an advanced functional material with various applications. This paper aims to provide readers with valuable insights into the design of alumina ceramic nanofibers and to explore their potential applications, contributing to the advancement of various technologies in the fields of energy, environment, and materials science.

Chiral Perovskite Nanocrystal Growth inside Helical Hollow Silica Nanoribbons

Helical perovskite nanocrystals (H-PNCs) were prepared using nanometric silica helical ribbons as platforms for the in situ growth of the crystals using the supersaturated recrystallization method. The H-PNCs grow inside nanometric helical porous silica, and their handedness is determined by the handedness of porous silica templates. They show both strong induced circular dichroism (CD) and strong induced circularly polarized luminescence (CPL) signals, with high dissymmetry g-factors. Right-handed and left-handed PNCs show respectively positive and negative CD and CPL signals, with a dissymmetry g-factor (abs and lum) of ∼±2 × 10^-2. Simulations based on the boundary element method demonstrate that the circular dichroism originates from the chiral shape of H-PNCs.

Silver-Nanowire-Based Elastic Conductors: Preparation Processes and Substrate Adhesion

The production of flexible electronic systems includes stretchable electrical interconnections and flexible electronic components, promoting the research and development of flexible conductors and stretchable conductive materials with large bending deformation or torsion resistance. Silver nanowires have the advantages of high conductivity, good transparency and flexibility in the development of flexible electronic products. In order to further prepare system-level flexible systems (such as autonomous full-software robots, etc.), it is necessary to focus on the conductivity of the system's composite conductor and the robustness of the system at the physical level. In terms of conductor preparation processes and substrate adhesion strategies, the more commonly used solutions are selected. Four kinds of elastic preparation processes (pretensioned/geometrically topological matrix, conductive fiber, aerogel composite, mixed percolation dopant) and five kinds of processes (coating, embedding, changing surface energy, chemical bond and force, adjusting tension and diffusion) to enhance the adhesion of composite conductors using silver nanowires as current-carrying channel substrates were reviewed. It is recommended to use the preparation process of mixed percolation doping and the adhesion mode of embedding/chemical bonding under non-special conditions. Developments in 3D printing and soft robots are also discussed.

Nanostructured Conducting Polymers and Their Applications in Energy Storage Devices

Due to the energy requirements for various human activities, and the need for a substantial change in the energy matrix, it is important to research and design new materials that allow the availability of appropriate technologies. In this sense, together with proposals that advocate a reduction in the conversion, storage, and feeding of clean energies, such as fuel cells and electrochemical capacitors energy consumption, there is an approach that is based on the development of better applications for and batteries. An alternative to commonly used inorganic materials is conducting polymers (CP). Strategies based on the formation of composite materials and nanostructures allow outstanding performances in electrochemical energy storage devices such as those mentioned. Particularly, the nanostructuring of CP stands out because, in the last two decades, there has been an important evolution in the design of various types of nanostructures, with a strong focus on their synergistic combination with other types of materials. This bibliographic compilation reviews state of the art in this area, with a special focus on how nanostructured CP would contribute to the search for new materials for the development of energy storage devices, based mainly on the morphology they present and on their versatility to be combined with other materials, which allows notable improvements in aspects such as reduction in ionic diffusion trajectories and electronic transport, optimization of spaces for ion penetration, a greater number of electrochemically active sites and better stability in charge/discharge cycles.

Plasmonic-Magnetic Active Nanorheology for Intracellular Viscosity

We demonstrate active plasmonic systems where plasmonic signals are repeatedly modulated by changing the orientation of nanoprobes under an external magnetic field, which is a prerequisite for in situ active nanorheology in intracellular viscosity measurements. Au/Ni/Au nanorods act as "nanotransmitters", which transmit the mechanical motion of nanorods to an electromagnetic radiation signal as a periodic sine function. This fluctuating optical response is transduced to frequency peaks via Fourier transform surface plasmon resonance (FTSPR). As a driving frequency of the external magnetic field applied to the Au/Ni/Au nanorods increases and reaches above a critical threshold, there is a transition from the synchronous motion of nanorods to asynchronous responses, leading to the disappearance of the FTSPR peak, which allows us to measure the local viscosity of the complex fluids. Using this ensemble-based method with plasmonic functional nanomaterials, we measure the intracellular viscosity of cancer cells and normal cells in a reliable and reproducible manner.

Electron and Ion Transport in Lithium and Lithium-Ion Battery Negative and Positive Composite Electrodes

Electrochemical energy storage systems, specifically lithium and lithium-ion batteries, are ubiquitous in contemporary society with the widespread deployment of portable electronic devices. Emerging storage applications such as integration of renewable energy generation and expanded adoption of electric vehicles present an array of functional demands. Critical to battery function are electron and ion transport as they determine the energy output of the battery under application conditions and what portion of the total energy contained in the battery can be utilized. This review considers electron and ion transport processes for active materials as well as positive and negative composite electrodes. Length and time scales over many orders of magnitude are relevant ranging from atomic arrangements of materials and short times for electron conduction to large format batteries and many years of operation. Characterization over this diversity of scales demands multiple methods to obtain a complete view of the transport processes involved. In addition, we offer a perspective on strategies for enabling rational design of electrodes, the role of continuum modeling, and the fundamental science needed for continued advancement of electrochemical energy storage systems with improved energy density, power, and lifetime.

The Promise of Soft-Matter-Enabled Quantum Materials

The field of quantum materials has experienced rapid growth over the past decade, driven by exciting new discoveries with immense transformative potential. Traditional synthetic methods to quantum materials have, however, limited the exploration of architectural control beyond the atomic scale. By contrast, soft matter self-assembly can be used to tailor material structure over a large range of length scales, with a vast array of possible form factors, promising emerging quantum material properties at the mesoscale. This review explores opportunities for soft matter science to impact the synthesis of quantum materials with advanced properties. Existing work at the interface of these two fields is highlighted, and perspectives are provided on possible future directions by discussing the potential benefits and challenges which can arise from their bridging.

Stimuli-Responsive Boron-Based Materials in Drug Delivery

Drug delivery systems, which use components at the nanoscale level as diagnostic tools or to release therapeutic drugs to particular target areas in a regulated manner, are a fast-evolving field of science. The active pharmaceutical substance can be released via the drug delivery system to produce the desired therapeutic effect. The poor bioavailability and irregular plasma drug levels of conventional drug delivery systems (tablets, capsules, syrups, etc.) prevent them from achieving sustained delivery. The entire therapy process may be ineffective without a reliable delivery system. To achieve optimal safety and effectiveness, the drug must also be administered at a precision-controlled rate and the targeted spot. The issues with traditional drug delivery are overcome by the development of stimuli-responsive controlled drug release. Over the past decades, regulated drug delivery has evolved considerably, progressing from large- and nanoscale to smart-controlled drug delivery for several diseases. The current review provides an updated overview of recent developments in the field of stimuli-responsive boron-based materials in drug delivery for various diseases. Boron-containing compounds such as boron nitride, boronic acid, and boron dipyrromethene have been developed as a moving field of research in drug delivery. Due to their ability to achieve precise control over drug release through the response to particular stimuli (pH, light, glutathione, glucose or temperature), stimuli-responsive nanoscale drug delivery systems are attracting a lot of attention. The potential of developing their capabilities to a wide range of nanoscale systems, such as nanoparticles, nanosheets/nanospheres, nanotubes, nanocarriers, microneedles, nanocapsules, hydrogel, nanoassembly, etc., is also addressed and examined. This review also provides overall design principles to include stimuli-responsive boron nanomaterial-based drug delivery systems, which might inspire new concepts and applications.

Polymerization within Nanoporous Anodized Alumina Oxide Templates (AAO): A Critical Survey

In the last few years, the polymerization of monomers within the nanocavities of porous materials has been thoroughly studied and developed, allowing for the synthesis of polymers with tailored morphologies, chemical architectures and functionalities. This is thus a subject of paramount scientific and technological relevance, which, however, has not previously been analyzed from a general perspective. The present overview reports the state of the art on polymerization reactions in spatial confinement within porous materials, focusing on the use of anodized aluminum oxide (AAO) templates. It includes the description of the AAO templates used as nanoreactors. The polymerization reactions are categorized based on the polymerization mechanism. Amongst others, this includes electrochemical polymerization, free radical polymerization, step polymerization and atom transfer radical polymerization (ATRP). For each polymerization mechanism, a further subdivision is made based on the nature of the monomer used. Other aspects of "in situ" polymerization reactions in restricted AAO geometries include: conversion monitoring, kinetic studies, modeling and polymer characterization. In addition to the description of the polymerization process itself, the use of polymer materials derived from polymerization in AAO templates in nanotechnology applications, is also highlighted. Finally, the review is concluded with a general discussion outlining the challenges that remain in the field.

Gold Nanoparticles as a Biosensor for Cancer Biomarker Determination

Molecular biology applications based on gold nanotechnology have revolutionary impacts, especially in diagnosing and treating molecular and cellular levels. The combination of plasmonic resonance, biochemistry, and optoelectronic engineering has increased the detection of molecules and the possibility of atoms. These advantages have brought medical research to the cellular level for application potential. Many research groups are working towards this. The superior analytical properties of gold nanoparticles can not only be used as an effective drug screening instrument for gene sequencing in new drug development but also as an essential tool for detecting physiological functions, such as blood glucose, antigen-antibody analysis, etc. The review introduces the principles of biomedical sensing systems, the principles of nanomaterial analysis applied to biomedicine at home and abroad, and the chemical surface modification of various gold nanoparticles.

Comparative Toxic Effect of Bulk Copper Oxide (CuO) and CuO Nanoparticles on Human Red Blood Cells

Destruction of red blood cell is associated with anemia and other pathological status; hence, the hemolytic effects of all chemicals and particles which come into contact with blood components must be considered. Nanomaterials and nanoparticles are potential substitutes for common material and particles, and assessment of their effect on blood components is a necessary part of their safety evaluation. High surface-to-volume ratio of nanoparticles may cause their toxic effects differ from those observed for bulk material. The aim of this study was to compare the hemolytic effects of CuO nanoparticles and bulk CuO. Red blood cells were isolated from blood of healthy subjects and hemolytic effects assayed following treatment of cells with 0.005-0.25 mM of CuO (bulk and nanoparticles) for 6 h. For assessment of other parameters, cells were incubated with 0.01, 0.05, and 0.25 mM of CuO nanoparticles and bulk CuO for 1, 2, and 3 h. Our results demonstrate that CuO nanoparticles, in particular, caused toxic hemolytic effects in concentration-dependent manner, and this effect maybe through formation of ROS, glutathione depletion, and lipid peroxidation. In conclusion, CuO nanoparticles are shown to effectively destruct human red blood cells in comparison to bulk CuO.

Recent Advances in One-Dimensional Micro/Nanomotors: Fabrication, Propulsion and Application

Due to their tiny size, autonomous motion and functionalize modifications, micro/nanomotors have shown great potential for environmental remediation, biomedicine and micro/nano-engineering. One-dimensional (1D) micro/nanomotors combine the characteristics of anisotropy and large aspect ratio of 1D materials with the advantages of functionalization and autonomous motion of micro/nanomotors for revolutionary applications. In this review, we discuss current research progress on 1D micro/nanomotors, including the fabrication methods, driving mechanisms, and recent advances in environmental remediation and biomedical applications, as well as discuss current challenges and possible solutions. With continuous attention and innovation, the advancement of 1D micro/nanomotors will pave the way for the continued development of the micro/nanomotor field.

Ultrasensitive Optical Fingerprinting of Biorelevant Molecules by Means of SERS-Mapping on Nanostructured Metasurfaces

The most relevant technique for portable (on-chip) sensors is Surface Enhanced Raman Scattering (SERS). This strategy crashes in the case of large (biorelevant) molecules and nano-objects, whose SERS spectra are irreproducible for "homeopathic" concentrations. We suggested solving this problem by SERS-mapping. We analyzed the distributions of SERS parameters for relatively "small" (malachite green (MG)) and "large" (phthalocyanine, H₂Pc*) molecules. While fluctuations of spectra for "small" MG were negligible, noticeable distribution of spectra was observed for "large" H₂Pc*. We show that the latter is due to a random arrangement of molecules with respect to "hot spot" areas, which have limited sizes, thus amplifying the lines corresponding to vibrations of different molecule parts. We have developed a method for engineering low-cost SERS substrates optimized for the best enhancement efficiency and a measurement protocol to obtain a reliable Raman spectrum, even for a countable number of large molecules randomly distributed over the substrate.

Modeling the Conductivity and Diffusion Permeability of a Track-Etched Membrane Taking into Account a Loose Layer

The microheterogeneous model makes it possible to describe the main transport properties of ion-exchange membranes using a single set of input parameters. This paper describes an adaptation of the microheterogeneous model for describing the electrical conductivity and diffusion permeability of a track-etched membrane (TEM). Usually, the transport parameters of TEMs are evaluated assuming that ion transfer occurs through the solution filling the membrane pores, which are cylindrical and oriented normally to the membrane surface. The version of the microheterogeneous model developed in this paper takes into account the presence of a loose layer, which forms as an intermediate layer between the pore solution and the membrane bulk material during track etching. It is assumed that this layer can be considered as a "gel phase" in the framework of the microheterogeneous model due to the fixed hydroxyl and carboxyl groups, which imparts ion exchange properties to the loose layer. The qualitative and quantitative agreement between the calculated and experimental concentration dependencies of the conductivity and diffusion permeability is discussed. The role of the model input parameters is described in relation to the structural features of the membrane. In particular, the inclination of the pores relative to the surface and their narrowing in the middle part of the membrane can be important for their properties.

Superstructures of Zeolitic Imidazolate Frameworks to Single- and Multiatom Sites for Electrochemical Energy Conversion

The exploration of electrocatalysts with high catalytic activity and long-term stability for electrochemical energy conversion is significant yet remains challenging. Zeolitic imidazolate framework (ZIF)-derived superstructures are a source of atomic-site-containing electrocatalysts. These atomic sites anchor the guest encapsulation and self-assembly of aspheric polyhedral particles produced using microreactor fabrication. This review provides an overview of ZIF-derived superstructures by highlighting some of the key structural types, such as open carbon cages, 1D superstructures, hollow structures, and the interconversion of superstructures. The fundamentals and representative structures are outlined to demonstrate the role of superstructures in the construction of materials with atomic sites, such as single- and dual-atom materials. Then, the roles of ZIF-derived single-atom sites for the electroreduction of CO₂ and electrochemical synthesis of H₂ O₂ are discussed, and their electrochemical performance for energy conversion is outlined. Finally, the perspective on advancing single- and dual-atom electrode-based electrochemical processes with enhanced redox activity and a low-impedance charge-transfer pathway for cathodes is provided. The challenges associated with ZIF-derived superstructures for electrochemical energy conversion are discussed.

The Influence of Mechanical Stress Micro Fields around Pores on the Strength of Elongated Etched Membrane

The investigation of the mechanical properties of polymer track-etched membranes (TMs) has attracted significant attention in connection with the extended region of their possible applications. In the present work, the mechanical stress fields around the pores of an elongated polyethylene terephthalate TM and around the 0.3 mm holes in model polymer specimens were studied in polarized light and with the finite element method. A break-up experiment showed the controlling role of stress field interaction in the forming of a microcrack system and the generation of a main crack with rupture of the TM (or model pattern). This interaction depended on the relative distance between the pores (holes) and their orientation. The results of the calculations of the pore distribution function over the surface of the TM via the net method and wavelet analysis are presented. The fractal character of pore distribution was established. The geometric characteristics of the TM pore system as initial defects are inherited by obtaining TM-based composites.

Formation of UHMWPE Nanofibers during Solid-State Deformation

A network of nanofibers is formed in situ through solid-state deformation of disentangled ultra-high molecular weight polyethylene (dis-UHMWPE) during compounding with a polyolefin elastomer below the melting temperature of dis-UHMWPE crystals. Dis-UHMWPE was prepared in the form of powder particles larger than 50 μm by polymerization at low temperatures, which favored the crystallization and prevention of macromolecules from entangling. Shearing the blend for different durations and at different temperatures affects the extent to which the grains of dis-UHMWPE powder deform into nanofibers. Disentangled powder particles could deform into a network of nanofibers with diameters between 110 and 340 nm. The nanocomposite can be further sheared for a longer time to decrease the diameter of dis-UHMWPE nanofibers below 40 nm, being still composed of ≈70 wt.% of crystalline and ≈30 wt.% of amorphous components. Subsequently, these thinner fibers begin to melt and fragment because they are thinner and also because the amorphous defects locally decrease the nanofibers' melting temperature, which results in their fragmentation and partial loss of nanofibers. These phenomena limit the thickness of dis-UHMWPE nanofibers, and this explains why prolonged or more intense shearing does not lead to thinner nanofibers of dis-UHMWPE when compounded in a polymeric matrix.

Electrochemical Deposition of Ferromagnetic Ni Nanoparticles in InP Nanotemplates Fabricated by Anodic Etching Using Environmentally Friendly Electrolyte

Porous InP templates possessing a thickness of up to 100 µm and uniformly distributed porosity were prepared by anodic etching of InP substrates exhibiting different electrical conductivities, involving an environmentally friendly electrolyte. Ni nanoparticles were successfully directly deposited by pulsed electroplating into prefabricated InP templates without any additional deposition of intermediary layers. The parameters of electrodeposition, including the pulse amplitude, pulse width and interval between pulses, were optimized to reach a uniform metal deposition covering the inner surface of the nanopores. The electrochemical dissolution of n-InP single crystals was investigated by measuring the current-voltage dependences, while the Ni-decorated n-InP templates have been characterized by scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). The proposed technology is expected to be of interest for sensing and photocatalytic applications, as well as for the exploration of their plasmonic and magnetic properties.

Molecular Plasmonics with Metamaterials

Molecular plasmonics, the area which deals with the interactions between surface plasmons and molecules, has received enormous interest in fundamental research and found numerous technological applications. Plasmonic metamaterials, which offer rich opportunities to control the light intensity, field polarization, and local density of electromagnetic states on subwavelength scales, provide a versatile platform to enhance and tune light-molecule interactions. A variety of applications, including spontaneous emission enhancement, optical modulation, optical sensing, and photoactuated nanochemistry, have been reported by exploiting molecular interactions with plasmonic metamaterials. In this paper, we provide a comprehensive overview of the developments of molecular plasmonics with metamaterials. After a brief introduction to the optical properties of plasmonic metamaterials and relevant fabrication approaches, we discuss light-molecule interactions in plasmonic metamaterials in both weak and strong coupling regimes. We then highlight the exploitation of molecules in metamaterials for applications ranging from emission control and optical modulation to optical sensing. The role of hot carriers generated in metamaterials for nanochemistry is also discussed. Perspectives on the future development of molecular plasmonics with metamaterials conclude the review. The use of molecules in combination with designer metamaterials provides a rich playground both to actively control metamaterials using molecular interactions and, in turn, to use metamaterials to control molecular processes.

Hierarchical Design in Nanoporous Metals

Hierarchically porous metals possess intriguing high accessibility of matter molecules and unique continuous metallic frameworks, as well as a high level of exposed active atoms. High rates of diffusion and fast energy transfer have been important and challenging goals of hierarchical design and porosity control with nanostructured metals. This review aims to summarize recent important progress toward the development of hierarchically porous metals, with special emphasis on synthetic strategies, hierarchical design in structure-function and corresponding applications. The current challenges and future prospects in this field are also discussed.

A Critical Review on Nanowire-Motors: Design, Mechanism and Applications

Nanowire-motors (NW-Ms) are promoting the rapid development of emerging biomedicine and environmental governance, and are an important branch of micro-nano motors in the development of nanotechnology. In recent years, huge research breakthroughs have been made in these fields in terms of the fascinating microstructure, conversion efficiency and practical applications of NW-Ms. This review article introduces the latest milestones in NW-Ms research, from production methods, driving mechanisms, control methods to targeted drug delivery, sewage detection, sensors and cell capture. The dynamics and physics of micro-nano devices are reviewed, and finally the current challenges and future research directions in this field are discussed. This review further aims to provide certain guidance for the driving of NW-Ms to meet the urgent needs of emerging applications.

Photothermal Conversion Profiling of Large-Scaled Synthesized Gold Nanorods Using Binary Surfactant with Hydroquinone as a Reducing Agent

Photothermal application of gold nanorods (AuNRs) is widely increasing because of their good photothermal conversion efficiency (PCE) due to local surface plasmon resonance. However, the high concentration of hexadecyltrimethylammonium bromide used in the synthesis is a concern. Moreover, the mild and commonly used reducing agent-ascorbic acid does not reduce the Au(I) to A(0) entirely, resulting in a low yield of gold nanorods. Herein we report for the first time the PCE of large-scaled synthesized AuNRs using the binary surfactant seed-mediated method with hydroquinone (HQ) as the reducing agent. The temporal evolution of the optical properties and morphology was investigated by varying the Ag concentration, HQ concentration, HCl volumes, and seed solution volume. The results showed that the seed volume, HQ concentration, and HCl volume played a significant role in forming mini-AuNRs absorbing in the 800 nm region with a shape yield of 87.7%. The as-synthesized AuNRs were successfully up-scaled to a larger volume based on the optimum synthetic conditions followed by photothermal profiling. The photothermal profiling analysis showed a temperature increase of more than 54.2 °C at 2.55 W cm⁻² at a low optical density (OD) of 0.160 after 630 s irradiation, with a PCE of approximately 21%, presenting it as an ideal photothermal agent.

Well-defined nanostructuring with designable anodic aluminum oxide template

Well-defined nanostructuring over size, shape, spatial configuration, and multi-combination is a feasible concept to reach unique properties of nanostructure arrays, while satisfying such broad and stringent requirements with conventional techniques is challenging. Here, we report designable anodic aluminium oxide templates to address this challenge by achieving well-defined pore features within templates in terms of in-plane and out-of-plane shape, size, spatial configuration, and pore combination. The structural designability of template pores arises from designing of unequal aluminium anodization rates at different anodization voltages, and further relies on a systematic blueprint guiding pore diversification. Starting from the designable templates, we realize a series of nanostructures that inherit equal structural controllability relative to their template counterparts. Proof-of-concept applications based on such nanostructures demonstrate boosted performance. In light of the broad selectivity and high controllability, designable templates will provide a useful platform for well-defined nanostructuring.

Well-defined nanostructuring is a feasible concept to achieve nanostructured arrays with unique properties. Here the authors report fabrication of designable anodic aluminum oxide templates with controllable in-plane and out-of-plane shapes, sizes, spatial configurations, and pore combinations.

Electrochemical Synthesis of Plasmonic Nanostructures

Thanks to their tunable and strong interaction with light, plasmonic nanostructures have been investigated for a wide range of applications. In most cases, controlling the electric field enhancement at the metal surface is crucial. This can be achieved by controlling the metal nanostructure size, shape, and location in three dimensions, which is synthetically challenging. Electrochemical methods can provide a reliable, simple, and cost-effective approach to nanostructure metals with a high degree of geometrical freedom. Herein, we review the use of electrochemistry to synthesize metal nanostructures in the context of plasmonics. Both template-free and templated electrochemical syntheses are presented, along with their strengths and limitations. While template-free techniques can be used for the mass production of low-cost but efficient plasmonic substrates, templated approaches offer an unprecedented synthetic control. Thus, a special emphasis is given to templated electrochemical lithographies, which can be used to synthesize complex metal architectures with defined dimensions and compositions in one, two and three dimensions. These techniques provide a spatial resolution down to the sub-10 nanometer range and are particularly successful at synthesizing well-defined metal nanoscale gaps that provide very large electric field enhancements, which are relevant for both fundamental and applied research in plasmonics.

An Overview of the Production of Magnetic Core-Shell Nanoparticles and Their Biomedical Applications

Several developments have recently emerged for core-shell magnetic nanomaterials, indicating that they are suitable materials for biomedical applications. Their usage in hyperthermia and drug delivery applications has escalated since the use of shell materials and has several beneficial effects for the treatment in question. The shell can protect the magnetic core from oxidation and provide biocompatibility for many materials. Yet, the synthesis of the core-shell materials is a multifaceted challenge as it involves several steps and parallel processes. Although reviews on magnetic core-shell nanoparticles exist, there is a lack of literature that compares the size and shape of magnetic core-shell nanomaterials synthesized via various methods. Therefore, this review outlines the primary synthetic routes for magnetic core-shell nanoparticles, along with the recent advances in magnetic core-shell nanomaterials. As core-shell nanoparticles have been proposed among others as therapeutic nanocarriers, their potential applications in hyperthermia drug delivery are discussed.