Atomic-scale structure and catalytic reactivity of the RuO(2)(110) surface

Oxygen vacancies in piezo-photocatalysts: synthesis, characterization, effect mechanism and application

The escalating consumption of fossil fuels and the worsening of environmental pollution have rendered the advancement of sustainable clean energy conversion technologies an urgent priority. Piezo-photocatalytic technology, which integrates piezoelectric and photoexcited properties, provides an efficient means of converting chemical energy by utilizing mechanical and solar energy. Oxygen vacancies (OVs), as a critical type of defect structure, play a significant role in enhancing piezo-photocatalytic performance by modifying the band structure, improving polarization effects, and providing additional active sites. This review comprehensively examines the formation methods and characterization techniques of OVs, alongside their mechanistic roles in piezo-photocatalytic technology. We discuss how OVs influence the band structure, dipole moments, and local electronic configurations. Furthermore, we summarize the applications of OVs in various fields, including water pollution degradation, hydrogen production, nitrogen fixation, and CO2 reduction. Finally, we outline future research directions for OVs, focusing on precise synthesis methods, the development of novel piezoelectric materials, enhancement of stability, and the investigation of interactions between OVs and other local structures. We hope that this review will provide valuable insights for the continued development and application of OVs in piezo-photocatalysis.

Inhibiting Overoxidation of Dynamically Evolved RuO2 to Achieve a Win-Win in Activity-Stability for Acidic Water Electrolysis

Proton exchange membrane (PEM) water electrolysis offers an efficient route to large-scale green hydrogen production, in which the RuO2 catalyst exhibits superior activity but limited stability. Unveiling the atomic-scale structural evolution during operando reaction conditions is critical but remains a grand challenge for enhancing the durability of the RuO2 catalyst in the acidic oxygen evolution reaction (a-OER). This study proposes an adaptive machine learning workflow to elucidate the potential-dependent state-to-state global evolution of the RuO2(110) surface within a complex composition and configuration space, revealing the correlation between structural patterns and stability. We identify the active state with distorted RuO5 units that self-evolve at low potential, which exhibits minor Ru dissolution and an activity self-promotion phenomenon. However, this state exhibits a low potential resistance capacity (PRC) and evolves into inert RuO4 units at elevated potential. To enhance PRC and mitigate the overevolution of the active state, we explore the metal doping engineering and uncover an inverse volcano-type doping rule: the doped metal-oxygen bond strength should significantly differ from the Ru-O bond. This rule provides a theoretical framework for designing stable RuO2-based catalysts and clarifies current discrepancies regarding the roles of different metals in stabilizing RuO2. Applying this rule, we predict and confirm experimentally that Na can effectively stabilize RuO2 in its active state. The synthesized Na-RuO2 operates in a-OER for over 1800 h without any degradation and enables long-term durability in PEM electrolysis. This work enhances our understanding of the operando structural evolution of RuO2 and aids in designing durable catalysts for a-OER.

Mn0.75Ru0.25O2 with Low Ru Concentration for Active and Durable Acidic Oxygen Evolution

Ruthenium has emerged as a promising alternative to iridium in water-splitting anodes. However, it becomes overoxidized and dissolves at industry-relevant working conditions. To enhance the activity and stability of electrocatalysts for oxygen evolution reaction, an isostructural rutile MnRu oxide with low Ru concentration (Mn0.75Ru0.25O2) is synthesized and an asymmetric Mn-O-Ru dual-site active center is developed. It exhibits 154 mV overpotential at 10 mA cm-2 and can operate stably at 200 mA cm-2 for 670 h with a degradation rate of 29 uV/h-1. A proton exchange membrane water electrolyzer achieves stable operation at 1 A cm-2 for 700 h with a degradation rate of 53 uV h-1. Structural analysis and isotopic labeling correlate the asymmetric nature of the Mn-O-Ru dual-site active center, which facilitates the oxygen evolution reaction along the radical coupling pathway, with the stabilization of the cations and the lattice oxygen in isostructural rutile Mn0.75Ru0.25O2.

Electrocatalysis: From Planar Surfaces to Nanostructured Interfaces

The reactions critical for the energy transition center on the chemistry of hydrogen, oxygen, carbon, and the heterogeneous catalyst surfaces that make up electrochemical energy conversion systems. Together, the surface-adsorbate interactions constitute the electrochemical interphase and define reaction kinetics of many clean energy technologies. Practical devices introduce high levels of complexity where surface roughness, structure, composition, and morphology combine with electrolyte, pH, diffusion, and system level limitations to challenge our ability to deconvolute underlying phenomena. To make significant strides in materials design, a structured approach based on well-defined surfaces is necessary to selectively control distinct parameters, while complexity is added sequentially through careful application of nanostructured surfaces. In this review, we cover advances made through this approach for key elements in the field, beginning with the simplest hydrogen oxidation and evolution reactions and concluding with more complex organic molecules. In each case, we offer a unique perspective on the contribution of well-defined systems to our understanding of electrochemical energy conversion technologies and how wider deployment can aid intelligent materials design.

Active Probing of a RuO2/CZ Catalyst Surface as a Tool for Bridging the Gap Between CO Oxidation Catalytic Tests in a Model and Realistic Exhaust Gas Stream

Herein, we present a paper that attempts to bridge the gap between CO oxidation catalytic tests performed in a model stream and a more realistic exhaust gas stream by incorporating characterization methods that allow for active probing of the catalyst surface. The results have shown that it is not just the abundance of a given type of species on the surface that impacts the activity of a system but also the ease of extraction of ions from their surface (time-of-flight secondary ion mass spectrometry) and the response of the support to change in the feed composition (dynamic in situ X-ray diffraction (XRD) with variable atmosphere). The study utilizes the method of doping a catalyst (RuO2/CZ) with a small amount of alkali-metal (K+ or Na+) carbonates in order to slightly modify its surface to gain insight into parameters that may cause discrepancies between model stream activity and complex stream activity. The most pronounced difference is that in the model stream, which contains only CO and O2 in helium, both alkali ions improve the activity of the system at temperatures around 175 °C, whereas in the complex stream, which mimics the exhaust stream from a diesel engine under oxygen lean conditions, the K+-doped catalyst is slightly worse than RuO2 /CZ and RuO2 + Na+/CZ and much worse in propane combustion. The total hydrogen consumption values (temperature-programmed reduction) and the Oads/Olatt ratios (X-ray photoelectron spectroscopy) both place the RuO2 + K+/CZ system between the other two and hence provided no reason for the unusual behavior of the K+-doped catalyst. In contrast, both in situ XRD measurement tests and ToF SIMS results show a pronounced difference between the RuO2 + K+/CZ catalyst and the other two systems, which indicates that the interaction of the surfaces with the reagents might be the cause of the discrepancy. The CO2-TPD results show that this system retains more CO2, i.e., the product, at adsorption sites, which might reduce the adsorption of other reagents, i.e., oxygen ions, CO, and propane, hence lowering the overall activity of the system.

Dynamic control and quantification of active sites on ceria for CO activation and hydrogenation

Ceria (CeO2) is a widely used oxide catalyst, yet the nature of its active sites remains elusive. This study combines model and powder catalyst studies to elucidate the structure-activity relationships in ceria-catalyzed CO activation and hydrogenation. Well-defined ceria clusters are synthesized on planar CeO2(111) and exhibit dynamic and tunable ranges of Ce coordination numbers, which enhance their interaction with CO. Reduced ceria clusters (e.g., Ce3O3) bind CO strongly and facilitate its dissociation, while near-stoichiometric clusters (e.g., Ce3O7) adsorb CO weakly and promote oxidation via carbonate formation. Unlike planar ceria surfaces, supported ceria clusters exhibit dynamic properties and enhanced catalytic activity, that mimic those of powder ceria catalysts. Insight from model studies provide a method to quantify active sites on powder ceria and guide further optimization of ceria catalysts for syngas conversion. This work marks a leap toward model-guided catalyst design and highlights the importance of site-specific catalysis.

Vacancy Ordering in Ultrathin Copper Oxide Films on Cu(111)

Oxide thin films grown on metal surfaces have wide applications in catalysis and beyond owing to their unique surface structures compared to their bulk counterparts. Despite extensive studies, the atomic structures of copper surface oxides on Cu(111), commonly referred to as "44" and "29", have remained elusive. In this work, we demonstrated an approach for the structural determination of oxide surfaces using element-specific scanning tunneling microscopy (STM) imaging enhanced by functionalized tips. This approach enabled us to resolve the atomic structures of "44" and "29" surface oxides, which were further corroborated by noncontact atomic force microscopy (nc-AFM) measurements and Monte Carlo (MC) simulations. The stoichiometry of the "44" and "29" frameworks was identified as Cu23O16 and Cu16O11, respectively. Contrary to the conventional hypothesis, we observed ordered Cu vacancies within the "44" structure manifesting as peanut-shaped cavities in the hexagonal lattice. Similarly, a combination of Cu and O vacancies within the "29" structure leads to bean-shaped cavities within the pentagonal lattice. Our study has thus resolved the decades-long controversy on the atomic structures of "44" and "29" surface oxides, advancing our understanding of copper oxidation processes and introducing a robust framework for the analysis of complex oxide surfaces.

Effects of Electric Field on Chemical Looping Combustion: A DFT Study of CO Oxidation on CuO (111) Surface

Chemical looping combustion (CLC) is a promising and novel technology for carbon dioxide (CO2) capture with a relatively low energy consumption and cost. CuO, one of the most attractive oxygen carriers (OCs) for carbon dioxide (CO) oxidation, suffers from sintering and agglomeration during the reduction process. Applying an electric field (EF) may promote the CO oxidation process on the CuO surface, which could mitigate sintering and agglomeration by decreasing operating temperatures with negligible combustion efficiency loss. This study performs density functional theory (DFT) simulations to investigate the effects of EF on the oxidation of CO on the CuO (111) surface. The results indicate that both the orientation and strength of the EF can significantly affect the oxidation characteristics of CO on the CuO (111) surface such as total reaction energy, energy barriers of reactions, CO adsorption, and CO2 desorption. For the first time, this study reveals the role of EF in enhancing CO oxidation through CLC processes via first-principle calculations. Such findings could provide new strategies to improve the performance of CLC processes.

Accelerating the prediction of inorganic surfaces with machine learning interatomic potentials

The surface properties of solid-state materials often dictate their functionality, especially for applications where nanoscale effects become important. The relevant surface(s) and their properties are determined, in large part, by the material's synthesis or operating conditions. These conditions dictate thermodynamic driving forces and kinetic rates responsible for yielding the observed surface structure and morphology. Computational surface science methods have long been applied to connect thermochemical conditions to surface phase stability, particularly in the heterogeneous catalysis and thin film growth communities. This review provides a brief introduction to first-principles approaches to compute surface phase diagrams before introducing emerging data-driven approaches. The remainder of the review focuses on the application of machine learning, predominantly in the form of learned interatomic potentials, to study complex surfaces. As machine learning algorithms and large datasets on which to train them become more commonplace in materials science, computational methods are poised to become even more predictive and powerful for modeling the complexities of inorganic surfaces at the nanoscale.

A Comprehensive Review on the Boosted Effects of Anion Vacancy in the Heterogeneous Photocatalytic Degradation, Part II: Focus on Oxygen Vacancy

Environmental problems, including the increasingly polluted water and the energy crisis, have led to a need to propose novel strategies/methodologies to contribute to sustainable progress and enhance human well-being. For these goals, heterogeneous semiconducting-based photocatalysis is introduced as a green, eco-friendly, cost-effective, and effective strategy. The introduction of anion vacancies in semiconductors has been well-known as an effective strategy for considerably enhancing the photocatalytic activity of such photocatalytic systems, giving them the advantages of promoting light harvesting, facilitating photogenerated electron-hole pair separation, optimizing the electronic structure, and enhancing the yield of reactive radicals. This Review will introduce the effects of anion vacancy-dominated photodegradation systems. Then, their mechanism will illustrate how an anion vacancy changes the photodegradation pathway to enhance the degradation efficiency toward pollutants and the overall photocatalytic performance. Specifically, the vacancy defect types and the methods of tailoring vacancies will be briefly illustrated, and this part of the Review will focus on the oxygen vacancy (OV) and its recent advances. The challenges and development issues for engineered vacancy defects in photocatalysts will also be discussed for practical applications and to provide a promising research direction. Finally, some prospects for this emerging field will be proposed and suggested. All permission numbers for adopted figures from the literature are summarized in a separate file for the Editor.

Crystal-Phase Engineering in Heterogeneous Catalysis

The performance of a chemical reaction is critically dependent on the electronic and/or geometric structures of a material in heterogeneous catalysis. Over the past century, the Sabatier principle has already provided a conceptual framework for optimal catalyst design by adjusting the electronic structure of the catalytic material via a change in composition. Beyond composition, it is essential to recognize that the geometric atomic structures of a catalyst, encompassing terraces, edges, steps, kinks, and corners, have a substantial impact on the activity and selectivity of a chemical reaction. Crystal-phase engineering has the capacity to bring about substantial alterations in the electronic and geometric configurations of a catalyst, enabling control over coordination numbers, morphological features, and the arrangement of surface atoms. Modulating the crystallographic phase is therefore an important strategy for improving the stability, activity, and selectivity of catalytic materials. Nonetheless, a complete understanding of how the performance depends on the crystal phase of a catalyst remains elusive, primarily due to the absence of a molecular-level view of active sites across various crystal phases. In this review, we primarily focus on assessing the dependence of catalytic performance on crystal phases to elucidate the challenges and complexities inherent in heterogeneous catalysis, ultimately aiming for improved catalyst design.

Spatially Separated Active Sites Enable Selective CO Oxidation Reaction on Oxide Catalyst

The search for efficient non-noble-metal catalysts able to perform selective oxidation reactions is of great importance, with relevance to many catalytic processes. However, this is often hampered because the origin of the selectivity remains controversial, particularly for reactions catalyzed by oxides. Here, combining high-pressure surface imaging techniques and theoretical calculations, we identify that spatially separated active sites for O2 activation and H2 adsorption on an ultrathin Mn3O4 surface enable selective oxidation of CO over H2. Theoretical calculations reveal that Mn-O pairs for H2 dissociation are separated from Mn-Mn pairs for the formation of adsorbed O2* so that H2 has to surmount much higher barriers for both H2 dissociation and H diffusion while CO can directly react with O2* following the Eley-Rideal process. Our study sheds light on the atomic-level understanding of the surface structure-dependent selective oxidation reaction on oxide catalysts.

Ultra-high vacuum compatible reactor for model catalyst study of ammonia synthesis at ambient pressure

A high sensitivity reactor was developed to study slow reactions, such as ammonia synthesis over low surface area model catalysts at 1 bar and up to 550 °C. The reactor is connected to an ultra-high vacuum system with a transferable sample design, which allows for cleaning, preparation, and spectroscopic characterization of samples before and after the reaction without exposure to any contaminated environment, such as air. A quasi-closed small volume (250 µl) quartz glass reaction cell is integrated through a capillary with a quartz glass sniffer tube connected to a mass spectrometer. The capillary reduces the 1 bar pressure in the cell to 10-7 mbar in the sniffer tube and mass spectrometer chamber. A quartz fiber-guided laser is used to heat up the sample, and the temperature can be regulated by the proportional-integral-derivative controlled laser power output for fast reaction kinetics research. Proof of principle ammonia synthesis experiments in this reactor at 1 bar, 350-500 °C on Fe(111) single crystal and mass-selected Ru clusters supported on CeO2 thin film yield kinetic parameters that agree very well to those reported in the literature.

Reconfigurable Manipulation of Oxygen Content on Metal Oxide Surfaces and Applications to Gas Sensing

Oxygen vacancies and adsorbed oxygen species on metal oxide surfaces play important roles in various fields. However, existing methods for manipulating surface oxygen require severe settings and are ineffective for repetitive manipulation. We present a method to manipulate the amount of surface oxygen by modifying the oxygen adsorption energy by electrically controlling the electron concentration of the metal oxide. The surface oxygen control ability of the method is verified using first-principles calculations based on density functional theory (DFT), X-ray photoelectron spectroscopy (XPS), and electrical resistance analysis. The presented method is implemented by fabricating oxide thin film transistors with embedded microheaters. The method can reconfigure the oxygen vacancies on the In2O3, SnO2, and IGZO surfaces so that specific chemisorption dominates. The method can selectively increase oxidizing (e.g., NO and NO) and reducing gas (e.g., H2S, NH3, and CO) reactions by electrically controlling the metal oxide surface to be oxygen vacancy-rich or adsorbed oxygen species-rich. The proposed method is applied to gas sensors and overcomes their existing limitations. The method makes the sensor insensitive to one gas (e.g., H2S) in mixed-gas environments (e.g., NO2+H2S) and provides a linear response (R2 = 0.998) to the target gas (e.g., NO2) concentration within 3 s. We believe that the proposed method is applicable to applications utilizing metal oxide surfaces.

Spontaneous Internal Electric Field in Heterojunction Boosts Bifunctional Oxygen Electrocatalysts for Zinc-Air Batteries: Theory, Experiment, and Application

Heterojunctions are a promising class of materials for high-efficiency bifunctional oxygen electrocatalysts in both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). However, the conventional theories fail to explain why many catalysts behave differently in ORR and OER, despite a reversible path (* O2 ⇋* OOH⇋* O⇋* OH). This study proposes the electron-/hole-rich catalytic center theory (e/h-CCT) to supplement the existing theories, it suggests that the Fermi level of catalysts determines the direction of electron transfer, which affects the direction of the oxidation/reduction reaction, and the density of states (DOS) near the Fermi level determines the accessibility for injecting electrons and holes. Additionally, heterojunctions with different Fermi levels form electron-/hole-rich catalytic centers near the Fermi levels to promote ORR/OER, respectively. To verify the universality of the e/h-CCT theory, this study reveals the randomly synthesized heterostructural Fe3 N-FeN0.0324 (Fex N@PC with DFT calculations and electrochemical tests. The results show that the heterostructural F3 N-FeN0.0324 facilitates the catalytic activities for ORR and OER simultaneously by forming an internal electron-/hole-rich interface. The rechargeable ZABs with Fex N@PC cathode display a high open circuit potential of 1.504 V, high power density of 223.67 mW cm-2 , high specific capacity of 766.20 mAh g-1 at 5 mA cm-2 , and excellent stability for over 300 h.

First-principles study of the magnetic exchange forces between the RuO2 (110) surface and Fe tip

Magnetic exchange force microscopy (MExFM) is an important experimental technique for mapping the magnetic structure of surfaces with atomic resolution relying on the spin-dependent short-range exchange interaction between a magnetic tip and a magnetic surface. RuO₂ is a significant compound with applications in heterogeneous catalysis and electrocatalysis. It has been characterized recently as an antiferromagnetic (AFM) material, and its magnetism has been predicted somewhat surprisingly to play an important role in its catalytic properties. In the current study, we explore theoretically whether MExFM can visualize the magnetic surface structure of RuO₂ . We use density functional theory (DFT) calculations to extract the exchange interactions between a ferromagnetic Fe tip interacting with an AFM RuO₂ (110) surface, as a function of tip-surface distance and the position of the tip over the surface. Mimicking the MExFM experiment, these data are then used to calculate the normalized frequency shift of an oscillating cantilever tip versus the minimum tip-surface distance, and construct corrugation height line profiles. It is found that the exchange interaction between tip and surface is strongest for a parallel configuration of the spins of the tip and of the surface; it is weakest for an anti-parallel orientation. In a corrugation profile, this gives rise to a sizable height difference of 25 pm between the spin-up and spin-down Ru atoms in the RuO₂ (110) surface at a normalized frequency shift γ ${\gamma }$ =-10.12 fNm^1/2 . The O atoms in the surface are not or hardly visible in the corrugation profile.

Defective Metal Oxides: Lessons from CO2 RR and Applications in NOx RR

Sluggish reaction kinetics and the undesired side reactions (hydrogen evolution reaction and self-reduction) are the main bottlenecks of electrochemical conversion reactions, such as the carbon dioxide and nitrate reduction reactions (CO₂ RR and NO₃ RR). To date, conventional strategies to overcome these challenges involve electronic structure modification and modulation of the charge-transfer behavior. Nonetheless, key aspects of surface modification, focused on boosting the intrinsic activity of active sites on the catalyst surface, are yet to be fully understood. Engingeering of oxygen vacancies (OVs) can tune surface/bulk electronic structure and improve surface active sites of electrocatalysts. The continuous breakthroughs and significant progress in the last decade position engineering of OVs as a potential technique for advancing electrocatalysis. Motivated by this, the state-of-the-art findings of the roles of OVs in both the CO₂ RR and the NO₃ RR are presented. The review starts with a description of approaches to constructing and techniques for characterizing OVs. This is followed by an overview of the mechanistic understanding of the CO₂ RR and a detailed discussion on the roles of OVs in the CO₂ RR. Then, insights into the NO₃ RR mechanism and the potential of OVs on NO₃ RR based on early findings are highlighted. Finally, the challenges in designing CO₂ RR/NO₃ RR electrocatalysts and perspectives in studying OV engineering are provided.

An Atom-Pair Design Strategy for Optimizing the Synergistic Electron Effects of Catalytic Sites in NO Selective Reduction

Effective adsorption and speedy surface reactions are vital requirements for efficient active sites in catalysis, but it remains challenging to maximize these two functions simultaneously. We present a solution to this issue by designing a series of atom-pair catalytic sites with tunable electronic interactions. As a case study, NO selective reduction occurring on V₁ -W₁ /TiO₂ is chosen. Experimental and theoretical results reveal that the synergistic electron effect present between the paired atoms enriches high-energy spin charge around the Fermi level, simultaneously rendering reactant (NH₃ or O₂ ) adsorption more effective and subsequent surface reactions speedier as compared with single V or W atom alone, and hence higher reaction rates. This strategy enables us to rationally design a high-performance V₁ -Mo₁ /TiO₂ catalyst with optimized vanadium(IV)-molybdenum(V) electronic interactions, which has exceptional activity significantly higher than the commercial or reported catalysts.

Small molecule binding to surface-supported single-site transition-metal reaction centres

Despite dominating industrial processes, heterogeneous catalysts remain challenging to characterize and control. This is largely attributable to the diversity of potentially active sites at the catalyst-reactant interface and the complex behaviour that can arise from interactions between active sites. Surface-supported, single-site molecular catalysts aim to bring together benefits of both heterogeneous and homogeneous catalysts, offering easy separability while exploiting molecular design of reactivity, though the presence of a surface is likely to influence reaction mechanisms. Here, we use metal-organic coordination to build reactive Fe-terpyridine sites on the Ag(111) surface and study their activity towards CO and C₂H₄ gaseous reactants using low-temperature ultrahigh-vacuum scanning tunnelling microscopy, scanning tunnelling spectroscopy, and atomic force microscopy supported by density-functional theory models. Using a site-by-site approach at low temperature to visualize the reaction pathway, we find that reactants bond to the Fe-tpy active sites via surface-bound intermediates, and investigate the role of the substrate in understanding and designing single-site catalysts on metallic supports.

Insights into Chlorobenzene Catalytic Oxidation over Noble Metal Loading {001}-TiO2: The Role of NaBH4 and Subnanometer Ru Undergoing Stable Ru0Ru4+ Circulation

Catalytic combustion of ubiquitous chlorinated volatile organic compounds (CVOCs) encounters bottlenecks regarding catalyst deactivation by chlorine poisoning and generation of toxic polychlorinated byproducts. Herein, Ru, Pd, and Rh were loaded on {001}-TiO₂ for thermal catalytic oxidation of chlorobenzene (CB), with Ru/{001}-TiO₂ representing superior reactivity, CO₂ selectivity, and stability in the 1000 min on-stream test. Interestingly, both acid sites and reactive active oxygen species (ROS) were remarkably promoted via adding NaBH₄. But merely enhancing these active sites of the catalyst in CVOC treatment is insufficient. Continuous deep oxidation of CB with effective Cl desorption is also a core issue successfully tackled through the steady Ru⁰↔Ru⁴⁺ circulation. This circulation was facilitated by the observed higher subnanometer Ru dispersion on {001}-TiO₂ than the other two noble metals that was supported by single atom stability DFT calculation. Nearly 88 degradation products in off-gas were detected, with Ru/{001}-TiO₂ producing the lowest polychlorinated benzene byproducts. An effective and sustainable CB degradation mechanism boosted by the cooperation of NaBH₄ enhanced active sites and Ru circulation was proposed accordingly. Insights gained from this study open a new avenue to the rational design of promising catalysts for the treatment of CVOCs.

Atomic Reconstruction and Oxygen Evolution Reaction of Mn3O4 Nanoparticles

Understanding the chemical states of individual surface atoms and their arrangements is essential for addressing several current issues such as catalysis, energy stroage/conversion, and environmental protection. Here, we exploit a profile imaging technique to understand the correlation between surface atomic structures and the oxygen evolution reaction (OER) in Mn₃O₄ nanoparticles. We image surface structures of Mn₃O₄ nanoparticles and observe surface reconstructions in the (110) and (101) planes. Mn³⁺ ions at the surface, which are commonly considered as the active sites in OER, disappear from the reconstructed planes, whereas Mn³⁺ ions are still exposed at the edges of nanoparticles. Our observations suggest that surface reconstructions can deactivate low-index surfaces of Mn oxides in OER. These structural and chemical observations are further validated by density functional theory calculations. This work shows why atomic-scale characterization of surface structures is crucial for a molecular-level understanding of a chemical reaction in oxide nanoparticles.

Exploring the roles of oxygen species in H2 oxidation at β-MnO2 surfaces using operando DRIFTS-MS

Understanding of the roles of oxygen species at reducible metal oxide surfaces under real oxidation conditions is important to improve the performance of these catalysts. The present study addresses this issue by applying a combination of operando diffuse reflectance infrared Fourier transform spectroscopy with a temperature-programmed reaction cell and mass spectrometry to explore the behaviors of oxygen species during H2 oxidation in a temperature range of 25-400 °C at β-MnO2 surfaces. It is revealed that O2 is dissociated simultaneously into terminal-type oxygen (M2+-O2-) and bridge-type oxygen (M+-O2--M+) via adsorption at the Mn cation with an oxygen vacancy. O2 adsorption is inhibited if the Mn cation is covered with terminal-adsorbed species (O, OH, or H2O). In a temperature range of 110-150 °C, OH at Mn cation becomes reactive and its reaction product (H2O) can desorb from the Mn cation, resulting in the formation of bare Mn cation for O2 adsorption and dissociation. At a temperature above 150 °C, OH is reactive enough to leave bare Mn cation for O2 adsorption and dissociation. These results suggest that bare metal cations with oxygen vacancies are important to improve the performance of reducible metal oxide catalysts.

Automated search for optimal surface phases (ASOPs) in grand canonical ensemble powered by machine learning

The surface of a material often undergoes dramatic structure evolution under a chemical environment, which, in turn, helps determine the different properties of the material. Here, we develop a general-purpose method for the automated search of optimal surface phases (ASOPs) in the grand canonical ensemble, which is facilitated by the stochastic surface walking (SSW) global optimization based on global neural network (G-NN) potential. The ASOP simulation starts by enumerating a series of composition grids, then utilizes SSW-NN to explore the configuration and composition spaces of surface phases, and relies on the Monte Carlo scheme to focus on energetically favorable compositions. The method is applied to silver surface oxide formation under the catalytic ethene epoxidation conditions. The known phases of surface oxides on Ag(111) are reproduced, and new phases on Ag(100) are revealed, which exhibit novel structure features that could be critical for understanding ethene epoxidation. Our results demonstrate that the ASOP method provides an automated and efficient way for probing complex surface structures that are beneficial for designing new functional materials under working conditions.

Electrically Tunable Reactivity of Substrate-Supported Cobalt Oxide Nanocrystals

First-row transition metal oxides are promising materials for catalyzing the oxygen evolution reaction. Surface sensitive techniques provide a unique perspective allowing the study of the structure, adsorption sites, and reactivity of catalysts at the atomic scale, which furnishes rationalization and improves the design of highly efficient catalytic materials. Here, a scanning probe microscopy study complemented by density functional theory on the structural and electronic properties of CoO nanoislands grown on Au(111) is reported. Two distinct phases are observed: The most extended displays a Moiré pattern (α-region), while the less abundant is 1Co:1Au coincidental (β-region). As a result of the surface registry, in the β-region the oxide adlayer is compressed by 9%, increasing the unoccupied local density of states and enhancing the selective water adsorption at low temperature through a cobalt inversion mechanism. Tip-induced voltage pulses irreversibly transform α- into β-regions, thus opening avenues to modify the structure and reactivity of transition metal oxides by external stimuli like electric fields.

Investigation of Active Catalysts at Work

Even after being in business for at least the last 100 years, research into the field of (heterogeneous) catalysis is still vibrant, both in academia and in industry. One of the reasons for this is that around 90% of all chemicals and materials used in everyday life are produced employing catalysis. In 2020, the global catalyst market size reached $35 billion, and it is still steadily increasing every year. Additionally, catalysts will be the driving force behind the transition toward sustainable energy. However, even after having been investigated for 100 years, we still have not reached the holy grail of developing catalysts from rational design instead of from trial-and-error. There are two main reasons for this, indicated by the two so-called "gaps" between (academic) research and actual catalysis. The first one is the "pressure gap", indicating the 13 orders of magnitude difference in pressure between the ultrahigh vacuum lab conditions and the atmospheric pressures (and higher) of industrial catalysis. The second one is the "materials gap", indicating the difference in complexity between single-crystal model catalysts of academic research and the real catalysts, consisting of metallic nanoparticles on supports, promoters, fillers, and binders. Although over the past decades significant efforts have been made in closing these gaps, many steps still have to be taken. In this Account, I will discuss the steps we have taken at Leiden University to further our fundamental understanding of heterogeneous catalysis at the (near-)atomic scale. I will focus on bridging the pressure gap, though we are also working on closing the materials gap. Over the past years, we developed state-of-the-art equipment that is able to investigate the (near-)atomic-scale structure of the catalyst surface during the chemical reaction using several surface-science-based techniques such as scanning tunneling microscopy, atomic force microscopy, optical microscopy, and X-ray-based techniques (surface X-ray diffraction, grazing-incidence small-angle X-ray scattering, and X-ray reflectivity, in collaboration with ESRF). Simultaneously with imaging the surface, we can investigate the catalyst's performance via mass spectrometry, enabling us to link changes in the catalyst structure to its activity, selectivity, or stability. Although we are currently investigating many industrially relevant catalytic systems, I will here focus the discussion on the oxidation of platinum during, for example, CO and NO oxidation, the NO reduction reaction on platinum, and the growth of graphene on liquid (molten) copper. I will show that to be able to obtain the full picture of heterogeneous catalysis, the ability to investigate the catalyst at the (near-)atomic scale during the chemical reaction is a must.

Water-Assisted Chemical Route Towards the Oxygen Evolution Reaction at the Hydrated (110) Ruthenium Oxide Surface: Heterogeneous Catalysis via DFT-MD and Metadynamics Simulations

Notwithstanding that RuO2 is a promising catalyst for the oxygen evolution reaction (OER), a plethora of fundamental details on its catalytic properties are still elusive, severely limiting its large-scale deployment. It is also established experimentally that corrosion and wettability of metal oxides can, in fact, enhance the catalytic activity for OER owing to the formation of a hydrated surface layer. However, the mechanistic interplay between surface wettability, interfacial water dynamics and OER across RuO2 , and what degree these processes are correlated are still debated. Herein, spin-polarized Density Functional Theory Molecular Dynamics (DFT-MD) simulations, coupled with advanced enhanced sampling methods in the well-tempered metadynamics framework, are applied to gain a global understanding of RuO2 aqueous interface (explicit water solvent) in catalyzing the OER, and hence possibly help in the design of novel catalysts in the context of photochemical water oxidation. The present study quantitatively assesses the free-energy barriers behind the OER at the (110)-RuO2 catalyst surface revealing plausible pathways composing the reaction network of the O2 evolution. In particular, OER is investigated at room temperature when such a surface is exposed to both gas-phase and liquid-phase water. Albeit a unique efficient pathway has been identified in the gas-phase OER, a surprisingly lowest-free-energy-requiring reaction route is possible when (110)-RuO2 is in contact with explicit liquid water. By estimating the free-energy surfaces associated to these processes, we reveal a noticeable water-assisted OER mechanism which involves a crucial proton-transfer-step assisted by the local water environment. These findings pave the way toward the systematic usage of DFT-MD coupled with metadynamics techniques for the fine assessment of the activity of catalysts, considering finite-temperature and explicit-solvent effects.

Oxygen vacancies generated by Sn-doped ZrO2 promoting the synthesis of dimethyl carbonate from methanol and CO2

Oxygen vacancy sites on a catalyst surface have been extensively studied and been proved to promote the adsorption and activation of carbon dioxide. We use Sn-doped ZrO₂ to prepare a Zr/Sn catalyst rich in oxygen vacancies (OVs) by co-precipitation. The yield of dimethyl carbonate is 5 times that of ZrO₂. Compared with the original ZrO₂, Zr/Sn exhibits a higher specific surface area, number of acid–base sites and a lower band gap, which improves the conductivity of electrons and creates more surface. The number of reaction sites greatly enhances the adsorption and activation capacity of CO₂ molecules on the catalyst surface. In situ infrared spectroscopy shows that CO₂ adsorbs on oxygen vacancies to form monomethyl carbonate, and participates in the reaction as an intermediate species. This work provides new clues for the preparation of ZrO₂-based catalysts rich in oxygen vacancies to directly catalyze the synthesis of dimethyl carbonate from methanol and CO₂.

Oxygen vacancy sites on a catalyst surface have been extensively studied and been proved to promote the adsorption and activation of carbon dioxide.

Single-atom catalyst for high-performance methanol oxidation

Single-atom catalysts have been widely investigated for several electrocatalytic reactions except electrochemical alcohol oxidation. Herein, we synthesize atomically dispersed platinum on ruthenium oxide (Pt₁/RuO₂) using a simple impregnation-adsorption method. We find that Pt₁/RuO₂ has good electrocatalytic activity towards methanol oxidation in an alkaline media with a mass activity that is 15.3-times higher than that of commercial Pt/C (6766 vs. 441 mA mg^‒1_Pt). In contrast, single atom Pt on carbon black is inert. Further, the mass activity of Pt₁/RuO₂ is superior to that of most Pt-based catalysts previously developed. Moreover, Pt₁/RuO₂ has a high tolerance towards CO poisoning, resulting in excellent catalytic stability. Ab initio simulations and experiments reveal that the presence of Pt‒O_3f (3-fold coordinatively bonded O)‒Ru_cus (coordinatively unsaturated Ru) bonds with the undercoordinated bridging O in Pt₁/RuO₂ favors the electrochemical dehydrogenation of methanol with lower energy barriers and onset potential than those encountered for Pt‒C and Pt‒Ru.

It is still challenging to engineer single-atom catalysts for electrocatalytic methanol oxidation. Here, the authors design Pt single atom supported on RuO2 for highly active methanol oxidation in contrast to the inert Pt single atom supported on carbon.

Recent advances in catalytic systems in the prism of physicochemical properties to remediate toxic CO pollutants: A state-of-the-art review

Carbon monoxide (CO) is the most harmful pollutant in the air, causing environmental issues and adversely affecting humans and the vegetation and then raises global warming indirectly. CO oxidation is one of the most effective methods of reducing CO by converting it into carbon dioxide (CO₂) using a suitable catalytic system, due to its simplicity and great value for pollution control. The CO oxidation reaction has been widely studied in various applications, including proton-exchange membrane fuel cell technology and catalytic converters. CO oxidation has also been of great academic interest over the last few decades as a model reaction. Many review studies have been produced on catalysts development for CO oxidation, emphasizing noble metal catalysts, the configuration of catalysts, process parameter influence, and the deactivation of catalysts. Nevertheless, there is still some gap in a state of the art knowledge devoted exclusively to synergistic interactions between catalytic activity and physicochemical properties. In an effort to fill this gap, this analysis updates and clarifies innovations for various latest developed catalytic CO oxidation systems with contemporary evaluation and the synergistic relationship between oxygen vacancies, strong metal-support interaction, particle size, metal dispersion, chemical composition acidity/basicity, reducibility, porosity, and surface area. This review study is useful for environmentalists, scientists, and experts working on mitigating the harmful effects of CO on both academic and commercial levels in the research and development sectors.

Synthesis, characterization and utilization of oxygen vacancy contained metal oxide semiconductors for energy and environmental catalysis

Developing novel functional materials with promising desired properties in enhancing energy conversion and lowering the catalytic reaction barriers is essential for the demand to solve the increasingly severe energy and environmental crisis nowadays. Metal oxide semiconductors (MOS) are widely used in the field of catalysis because of its excellent catalytic characteristics. Introduction of defects, in addition to the adjustment of composition and atomic arrangement in the materials can effectively improve the materials' catalytic performance. Especially, introducing oxygen vacancies (OVs) into the lattice structure of MOS has been developed as a facile route to improve MOS's optical and electronic transmission characteristics. And a large number of metal oxides with rich OVs have been served in oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER), carbon dioxide reduction reaction (CO₂-RR) photo-degradation of organic pollutants, etc. This small review briefly outlines some preparation techniques to introduce OVs into MOS, and the characterization techniques to identify and quantify the OVs in MOS. The applications of OVs contained MOS especially in energy and environmental catalysis areas are also discussed. The effects of OVs types and concentrations on the catalytic performances are deliberated. Finally, the defective structure-catalytic property relationship is highlighted, and the future status and opportunities of MOS containing OVs in the catalytic field are suggested.

Probing surface-sensitive redox properties of VOx/TiO2 catalyst nanoparticles

Redox processes of oxide materials are fundamental in catalysis. These processes depend on the surface structure and stoichiometry of the oxide and are therefore expected to vary between surface facets. However, there is a lack of direct measurements of redox properties on the nanoscale for analysing the importance of such faceting effects in technical materials. Here, we address the facet-dependent redox properties of vanadium-oxide-covered anatase nanoparticles of relevance to, e.g., selective catalytic reduction of nitrogen oxides. The vanadium oxidation states at individual nanoscale facets are resolved in situ under catalytically relevant conditions by combining transmission electron microscopy imaging and electron energy loss spectroscopy. The measurements reveal that vanadium on {001} facets consistently retain higher oxidation states than on {10l} facets. Insight into such structure-sensitivity of surface redox processes opens prospects of tailoring oxide nanoparticles with enhanced catalytic functionalities.

Phase Control of Noble Monometallic and Alloy Nanomaterials by Chemical Reduction Methods

In recent years, the phase control of monometallic and alloy nanomaterials has attracted great attention because of the potential to tune the physical and chemical properties of these species. In this Review, an overview of the latest research progress in phase-controlled monometallic and alloy nanomaterials is first given. Then, the phase-controlled synthesis using a chemical reduction method are discussed, and the formation mechanisms of these nanomaterials are specifically highlighted. Lastly, the challenges and future perspectives in this new research field are discussed.

CO Oxidation on Planar Au/TiO2 Model Catalysts under Realistic Conditions: A Combined Kinetic and IR Study

The oxidation of CO on planar Au/TiO2 model catalysts was investigated under pressure and temperature conditions similar to those for experiments with more realistic Au/TiO2 powder catalysts. The effects of a change of temperature, pressure, and gold coverage on the CO oxidation activity were studied. Additionally, the reasons for the deactivation of the catalysts were examined in long-term experiments. From kinetic measurements, the activation energy and the reaction order for the CO oxidation reaction were derived and a close correspondence with results of powder catalysts was found, although the overall turnover frequency (TOF) measured in our experiments was around one order of magnitude lower compared to results of powder catalysts under similar conditions. Furthermore, long-term experiments at 80 °C showed a decrease of the activity of the model catalysts after some hours. Simultaneous in-situ IR experiments revealed a decrease of the signal intensity of the CO vibration band, while the tendency for the build-up of side products (e. g. carbonates, carboxylates) of the CO oxidation reaction on the surface of the planar model catalysts was rather low.

High energy surface x-ray diffraction applied to model catalyst surfaces at work

Catalysts are materials that accelerate the rate of a desired chemical reaction. As such, they constitute an integral part in many applications ranging from the production of fine chemicals in chemical industry to exhaust gas treatment in vehicles. Accordingly, it is of utmost economic interest to improve catalyst efficiency and performance, which requires an understanding of the interplay between the catalyst structure, the gas phase and the catalytic activity under realistic reaction conditions at ambient pressures and elevated temperatures. In recent years efforts have been made to increasingly develop techniques that allow for investigating model catalyst samples under conditions closer to those of real technical catalysts. One of these techniques is high energy surface x-ray diffraction (HESXRD), which uses x-rays with photon energies typically in the range of 70-80 keV. HESXRD allows a fast data collection of three dimensional reciprocal space for the structure determination of model catalyst samples under operando conditions and has since been used for the investigation of an increasing number of different model catalysts. In this article we will review general considerations of HESXRD including its working principle for different model catalyst samples and the experimental equipment required. An overview over HESXRD investigations performed in recent years will be given, and the advantages of HESXRD with respect to its application to different model catalyst samples will be presented. Moreover, the combination of HESXRD with other operando techniques such as in situ mass spectrometry, planar laser-induced fluorescence and surface optical reflectance will be discussed. The article will close with an outlook on future perspectives and applications of HESXRD.

Reductive silylation of polyoxovanadate surfaces using Mashima's reagent

Mechanistic insights into the reductive silylation of metal oxide surfaces.

Trends in C-O and N-O bond scission on rutile oxides described using oxygen vacancy formation energies

Reactivity trends on transition metals can generally be understood through the d-band model, but no analogous theory exists for transition metal oxides. This limits the generality of analyses in oxide-based catalysis and surface chemistry and has motivated the appearance of numerous descriptors. Here we show that oxygen vacancy formation energy (ΔE _Vac) is an inexpensive yet accurate and general descriptor for trends in transition-state energies, which are usually difficult to assess. For rutile-type oxides (MO₂ with M = 3d metals from Ti to Ni), we show that ΔE _Vac captures the trends in C-O and N-O bond scission of CO₂, CH₃OH, N₂O, and NH₂OH at oxygen vacancies. The proportionality between ΔE _Vac and transition-state energies is rationalized by analyzing the oxygen-metal bonds, which change from ionic to covalent from TiO₂ to NiO₂. ΔE _Vac may be used to design oxide catalysts, in particular those where lattice oxygen and/or oxygen vacancies participate in the catalytic cycles.

Catalytic Stability Studies Employing Dedicated Model Catalysts

Long-term stability of heterogeneous catalysts is an omnipresent and pressing concern in industrial processes. Catalysts with high activity and selectivity can be searched for by high-throughput screening methods based maybe on educated guesses provided by ab initio thermodynamics or scaling relations. However, high-throughput screening is not feasible and is hardly able to identify long-term stable catalyst so that a rational and knowledge-driven approach is called for to identify potentially stable and active catalysts. Unfortunately, our current microscopic understanding on stability issues is quite poor. We propose that this gap in knowledge can be at least partly closed by investigating dedicated model catalyst materials with well-defined morphology that allow for a tight link to theory and the application of standard characterization methods. This topic is highly interdisciplinary, combining sophisticated inorganic synthesis with catalysis research, surface chemistry, and powerful theoretical modeling. In this Account, we focus on the stability issues of Deacon catalysts (RuO₂ and CeO₂-based materials) for recovering Cl₂ from HCl by aerobic oxidation and how to deepen our microscopic insight into the underlying processes. The main stability problems under harsh Deacon reaction conditions concomitant with a substantial loss in activity arise from deep chlorination of the catalyst, leaching of volatile chlorides and oxychlorides, and decrease in active surface area by particle sintering. In general, powder materials with undefined particle shape are not well suited for examining catalyst stability, because changes in the morphology are difficult to recognize, for instance, by electron microscopy. Rather, we focus here on model materials with well-defined starting morphologies, including electrospun nanofibers, shape-controlled nanoparticles, and well-defined ultrathin crystalline layers. CeO₂ is able to stabilize shape-controlled particles, exposing a single facet orientation so that comparing activity and stability studies can reveal structure sensitive properties. We develop a quasi-steady-state kinetic approach that allows us to model the catalyst chlorination as a function of temperature and gas feed composition. For the case of pure CeO₂ nanocubes, this simple approach predicts chlorination to be efficiently suppressed by addition of little amounts of water in the reaction feed or by keeping the catalyst at higher temperature. Both process parameters have great impact on the actual reactor design. Thermal stabilization of CeO₂ by intermixing Zr has been known in automotive exhaust catalysis for decades, but this does not necessarily imply also chemical stabilization of CeO₂ against bulk-chlorination since Zr can readily form volatile ZrCl₄ and may quickly lose its stabilizing effect. Nevertheless, with model experiments the stabilizing effect of Zr in the Deacon process over mixed Ce_xZr_1-xO₂ nanorods is clearly evidenced. Even higher stability can be accomplished with ultrathin CeO₂ coatings on preformed ZrO₂ particles, demonstrating the great promise of atomic layer deposition (ALD) in catalysis synthesis.

A study on the acidity of sulfated CuO layers grown by surface reconstruction of Cu2O with specific exposed facets

Surface reconstruction and sulfation improve the acidity of Cu₂O, and moderate Lewis acid sites are the active sites in Pechmann condensation.