Structural basis for sugar translocation through maltoporin channels at 3.1 A resolution

A multifarious bacterial surface display: potential platform for biotechnological applications

Bacterial-cell surface display represents a novel field of protein engineering, which is grounds for presenting recombinant proteins or peptides on the surface of host cells. This technique is primarily used for endowing cellular activity on the host cells and enables several biotechnological applications. In this review, we comprehensively summarize the speciality of bacterial surface display, specifically in gram-positive and gram-negative organisms and then we depict the practical cases to show the importance of bacterial cell surface display in biomedicine and bioremediation domains. We manifest that among other display systems such as phages and ribosomes, the cell surface display using bacterial cells can be used to avoid the loss of combinatorial protein libraries and also open the possibility of isolating target-binding variants using high-throughput selection platforms. Thus, it is becoming a robust tool for functionalizing microbes to serve as a potential implement for various bioengineering purposes.

Vaccination with OprB porin, and its epitopes offers protection against A. baumannii infections in mice

A. baumannii is a deadly antimicrobial resistance pathogen that acquires drug resistance through different mechanisms. Therefore, it is necessary to investigate all its virulence factors and design effective vaccines against it. For this purpose, OprB, an outer membrane porin, was investigated in this study, and its secondary and tertiary structures, physicochemical properties, and B-T epitopes were determined. The vaccine potential of this protein and its linear, non-continuous, and chimeric epitopes were also in-vivo analyzed. Based on the results, two surface epitopes and one non-continuous epitope were identified. Surface contiguous epitopes were produced recombinantly and non-continuous epitope sequences were synthesized and then produced. The chimeric epitope was also produced via the SOE-PCR technique. Active and passive immunization of mice with the whole OprB protein, non-continuous epitope, contiguous epitopes, two epitopes in chimeric form, as well as the mixture of two purified epitopes showed that the survival level and total IgG titer of the mice compared to non-vaccinated mice or mice that were vaccinated with an internal fragment increased significantly. The bacterial load in the immunized mice's lung, liver, kidney, and spleen was much lower than in the control groups, and the TNF-α, IFN-γ, and IL-6 cytokines levels were also lower in these groups and were similar to the naive mice. On the other hand, subunit vaccines showed acceptable safety and due to their minimal cross-activity, their use is much safer.

Identification of amino acid residue in the Cronobacter sakazakii LamB responsible for the receptor compatibility of polyvalent coliphage CSP1

Polyvalent bacteriophages show the feature of infecting bacteria across multiple species or even orders. Infectivity of a polyvalent phage is variable depending on the host bacteria, which can disclose differential inhibition of bacteria by the phage. In this study, a polyvalent phage CSP1 infecting both Cronobacter sakazakii ATCC 29544 and Escherichia coli MG1655 was isolated. CSP1 showed higher growth inhibition and adsorption rate in E. coli compared to C. sakazakii, and identification of host receptors revealed that CSP1 uses E. coli LamB (LamBE) as a receptor but that CSP1 requires both C. sakazakii LamB (LamBC) and lipopolysaccharide (LPS) core for C. sakazakii infection. The substitution of LamBC with LamBE in C. sakazakii enhanced CSP1 susceptibility and made C. sakazakii LPS core no more essential for CSP1 infection. Comparative analysis of LamBC and LamBE disclosed that the extra proline at amino acid residue 284 in LamBC made a structural distinction by forming a longer loop and that the deletion of 284P in LamBC aligns its structure and makes LamBC function like LamBE, enhancing CSP1 adsorption and growth inhibition of C. sakazakii. These results suggest that 284P of LamBC plays a critical role in determining the CSP1-host bacteria interaction. These findings could provide insight into the elucidation of molecular determinants in the interaction between polyvalent phages and host bacteria and help us to understand the phage infectivity for efficient phage application.

IMPORTANCE

Polyvalent phages have the advantage of a broader host range, overcoming the limitation of the narrow host range of phages. However, the limited molecular biological understanding on the host bacteria-polyvalent phage interaction hinders its effective application. Here, we revealed that the ability of the polyvalent phage CSP1 to infect Cronobacter sakazakii ATCC 29544 is disturbed by a single proline residue in the LamB protein and that lipopolysaccharide is used as an auxiliary receptor for CSP1 to support the adsorption and the subsequent infection of C. sakazakii. These results can contribute to a better understanding of the interaction between polyvalent phages and host bacteria for efficient phage application.

Conformational flexibility driving charge-selective substrate translocation across a bacterial transporter

Bacterial membrane porins facilitate the translocation of small molecules while restricting large molecules, and this mechanism remains elusive at the molecular level. Here, we investigate the selective uptake of large cyclic sugars across an unusual passive membrane transporter, CymA, comprising a charged zone and a constricting N terminus segment. Using a combination of electrical recordings, protein mutagenesis and molecular dynamics simulations, we establish substrate translocation across CymA governed by the electrostatic pore properties and conformational dynamics of the constriction segment. Notably, we show that the variation in pH of the environment resulted in reversible modulation of the substrate binding site in the pore, thereby regulating charge-selective transport of cationic, anionic and neutral cyclic sugars. The quantitative kinetics of cyclic sugar translocation across CymA obtained in electrical recordings at different pHs are comparable with molecular dynamics simulations that revealed the transport pathway, energetics and favorable affinity sites in the pore for substrate binding. We further define the molecular basis of cyclic sugar translocation and establish that the constriction segment is flexible and can reside inside or outside the pore, regulating substrate translocation distinct from the ligand-gated transport mechanism. Our study provides novel insights into energy-independent large molecular membrane transport for targeted drug design strategies.

Solute translocation probability, lifetime, and "rectification" in membrane channels with localized constriction

We study the translocation probability and lifetime of a solute molecule in a cylindrical membrane channel that contains a localized constriction at an arbitrary location. Using a one-dimensional continuous diffusion description of solute dynamics in the channel, we explore two models. The first one describes a molecule's interaction with the constriction in terms of a narrow rectangular barrier in the potential of mean force. The second novel model proposed here represents this interaction by introducing an infinitely thin permeable partition. It is shown that when the parameters of the two models are chosen to warrant the same translocation probability, both models predict the same mean lifetime of the molecule in the channel. While the translocation probability is independent of the constriction location, the mean lifetime is a function of the location. The benefit of the thin partition model is that it allows one to lump together the height and length of the potential barrier into a single parameter, which is the partition's permeability. It is shown that in the case of an asymmetric location of the localized constriction and strong repulsion between the solutes, the solute flux through the channel is a function of the direction in which it goes, analogous to the phenomenon known in ion channel electrophysiology as rectification.

Structural mechanism of bacteriophage lambda tail's interaction with the bacterial receptor

Bacteriophage infection, a pivotal process in microbiology, initiates with the phage's tail recognizing and binding to the bacterial cell surface, which then mediates the injection of viral DNA. Although comprehensive studies on the interaction between bacteriophage lambda and its outer membrane receptor, LamB, have provided rich information about the system's biochemical properties, the precise molecular mechanism remains undetermined. This study revealed the high-resolution cryo-electron microscopy (cryo-EM) structures of the bacteriophage lambda tail complexed with its irreversible Shigella sonnei 3070 LamB receptor and the closed central tail fiber. These structures reveal the complex processes that trigger infection and demonstrate a substantial conformational change in the phage lambda tail tip upon LamB binding. Providing detailed structures of bacteriophage lambda infection initiation, this study contributes to the expanding knowledge of lambda-bacterial interaction, which holds significance in the fields of microbiology and therapeutic development.

Counter-Intuitive Features of Particle Dynamics in Nanopores

Using the framework of a continuous diffusion model based on the Smoluchowski equation, we analyze particle dynamics in the confinement of a transmembrane nanopore. We briefly review existing analytical results to highlight consequences of interactions between the channel nanopore and the translocating particles. These interactions are described within a minimalistic approach by lumping together multiple physical forces acting on the particle in the pore into a one-dimensional potential of mean force. Such radical simplification allows us to obtain transparent analytical results, often in a simple algebraic form. While most of our findings are quite intuitive, some of them may seem unexpected and even surprising at first glance. The focus is on five examples: (i) attractive interactions between the particles and the nanopore create a potential well and thus cause the particles to spend more time in the pore but, nevertheless, increase their net flux; (ii) if the potential well-describing particle-pore interaction occupies only a part of the pore length, the mean translocation time is a non-monotonic function of the well length, first increasing and then decreasing with the length; (iii) when a rectangular potential well occupies the entire nanopore, the mean particle residence time in the pore is independent of the particle diffusivity inside the pore and depends only on its diffusivity in the bulk; (iv) although in the presence of a potential bias applied to the nanopore the "downhill" particle flux is higher than the "uphill" one, the mean translocation times and their distributions are identical, i.e., independent of the translocation direction; and (v) fast spontaneous gating affects nanopore selectivity when its characteristic time is comparable to that of the particle transport through the pore.

Automated simulation-based membrane protein refinement into cryo-EM data

The resolution revolution has increasingly enabled single-particle cryogenic electron microscopy (cryo-EM) reconstructions of previously inaccessible systems, including membrane proteins-a category that constitutes a disproportionate share of drug targets. We present a protocol for using density-guided molecular dynamics simulations to automatically refine atomistic models into membrane protein cryo-EM maps. Using adaptive force density-guided simulations as implemented in the GROMACS molecular dynamics package, we show how automated model refinement of a membrane protein is achieved without the need to manually tune the fitting force ad hoc. We also present selection criteria to choose the best-fit model that balances stereochemistry and goodness of fit. The proposed protocol was used to refine models into a new cryo-EM density of the membrane protein maltoporin, either in a lipid bilayer or detergent micelle, and we found that results do not substantially differ from fitting in solution. Fitted structures satisfied classical model-quality metrics and improved the quality and the model-to-map correlation of the x-ray starting structure. Additionally, the density-guided fitting in combination with generalized orientation-dependent all-atom potential was used to correct the pixel-size estimation of the experimental cryo-EM density map. This work demonstrates the applicability of a straightforward automated approach to fitting membrane protein cryo-EM densities. Such computational approaches promise to facilitate rapid refinement of proteins under different conditions or with various ligands present, including targets in the highly relevant superfamily of membrane proteins.

Analysis of Cellular Damage Resulting from Exposure of Bacteria to Graphene Oxide and Hybrids Using Fourier Transform Infrared Spectroscopy

With the increase in antimicrobial resistance, there is an urgent need to find new antimicrobials. Four particulate antimicrobial compounds, graphite (G), graphene oxide (GO), silver-graphene oxide (Ag-GO) and zinc oxide-graphene oxide (ZnO-GO) were tested against Enterococcus faecium, Escherichia coli, Klebsiella pneumoniae and Staphylococcus aureus. The antimicrobial effects on the cellular ultrastructure were determined using Fourier transform infrared spectroscopy (FTIR), and selected FTIR spectral metrics correlated with cell damage and death arising from exposure to the GO hybrids. Ag-GO caused the most severe damage to the cellular ultrastructure, whilst GO caused intermediate damage. Graphite exposure caused unexpectedly high levels of damage to E. coli, whereas ZnO-GO exposure led to relatively low levels of damage. The Gram-negative bacteria demonstrated a stronger correlation between FTIR metrics, indicated by the perturbation index and the minimal bactericidal concentration (MBC). The blue shift of the combined ester carbonyl and amide I band was stronger for the Gram-negative varieties. FTIR metrics tended to provide a better assessment of cell damage based on correlation with cellular imaging and indicated that damage to the lipopolysaccharide, peptidoglycan and phospholipid bilayers had occurred. Further investigations into the cell damage caused by the GO-based materials will allow the development of this type of carbon-based multimode antimicrobials.

Computational prediction of extracellular loops of the Por39 outer membrane porin of Rhodospirillum rubrum suitable for epitope surface display

Outer membrane porins from Gram-negative bacteria are established vehicles for the production of vaccines. Typically, one or more of the extracellular loops of a porin are replaced by a peptide encoding a foreign epitope, and recombinant porin is then used as a vaccine. However, many host strains are potentially pathogenic, and also produce toxic lipopolysaccharide (LPS), both of which are undesirable for safety reasons. In contrast, the outer membrane porins from photosynthetic, purple bacteria have no known human pathology and produce only weakly toxic LPS. The purple bacterium Rhodospirillum rubrum is well-suited for large-scale biotechnology, and expresses a major porin, Por39, which is a candidate for a vaccine platform. Unfortunately, the atomic structure of Por39 could not be determined so far, and Por39 shows only a weak homology to other porins of known structure, making the assignment of external loops difficult. Here, we construct a knowledge-based model of Por39 using secondary structure constraints from both the low sequence homology to the 2POR porin from Rhodobacter capsulatus, for which the X-ray structure is known, as well as those obtained using secondary structure prediction packages. The secondary structure predictions were used to constrain a three-dimensional model created using the I-TASSER package. The modelling procedure was validated by predicting the structure of 2POR using the same strategy, but excluding the 2POR X-ray structure from the I-TASSER database. The final Por39 model allows three external loops to be defined precisely, and could also be used to obtain an initial model for the closely related Por41 using molecular modelling. These structures provide a good starting point for the insertion of epitopes with vaccine potential.

Multifaceted Computational Modeling in Glycoscience

Glycoscience assembles all the scientific disciplines involved in studying various molecules and macromolecules containing carbohydrates and complex glycans. Such an ensemble involves one of the most extensive sets of molecules in quantity and occurrence since they occur in all microorganisms and higher organisms. Once the compositions and sequences of these molecules are established, the determination of their three-dimensional structural and dynamical features is a step toward understanding the molecular basis underlying their properties and functions. The range of the relevant computational methods capable of addressing such issues is anchored by the specificity of stereoelectronic effects from quantum chemistry to mesoscale modeling throughout molecular dynamics and mechanics and coarse-grained and docking calculations. The Review leads the reader through the detailed presentations of the applications of computational modeling. The illustrations cover carbohydrate-carbohydrate interactions, glycolipids, and N- and O-linked glycans, emphasizing their role in SARS-CoV-2. The presentation continues with the structure of polysaccharides in solution and solid-state and lipopolysaccharides in membranes. The full range of protein-carbohydrate interactions is presented, as exemplified by carbohydrate-active enzymes, transporters, lectins, antibodies, and glycosaminoglycan binding proteins. A final section features a list of 150 tools and databases to help address the many issues of structural glycobioinformatics.

Transmembrane β-barrel proteins of bacteria: From structure to function

The outer membrane of Gram-negative bacteria is a specialized organelle conferring protection to the cell against various environmental stresses and resistance to many harmful compounds. The outer membrane has a number of unique features, including an asymmetric lipid bilayer, the presence of lipopolysaccharides and an individual proteome. The vast majority of the integral transmembrane proteins in the outer membrane belongs to the family of β-barrel proteins. These evolutionarily related proteins share a cylindrical, anti-parallel β-sheet core fold spanning the outer membrane. The loops and accessory domains attached to the β-barrel allow for a remarkable versatility in function for these proteins, ranging from diffusion pores and transporters to enzymes and adhesins. We summarize the current knowledge on β-barrel structure and folding and give an overview of their functions, evolution, and potential as drug targets.

DcaP porin and its epitope-based subunit promise effective vaccines against Acinetobacter baumannii; in-silico and in-vivo approaches

A. baumannii is a multi-drug resistant pathogen with a relatively high mortality rate. To date, no vaccine has been approved against this bacterium. DcaP is a high abundance porin during infection that its structure has been recently determined, but no information about its immunogenic properties has been reported yet. So, in this study DcaP properties were analyzed and its vaccine potential was evaluated. The results showed this porin is an extremely conserved antigen with no allergenicity and toxicity that bears no resemblance to human proteins. Six potential immunogen areas in the DcaP sequence were detected based on in-silico B and T-cell epitope mapping and other approaches. A multiple-epitope potential vaccine was designed based on the predicted linear epitopes and amplified by overlap extension PCR technique. In-vivo results indicated that active and passive immunization of mice with the DcaP protein or its designed subunit vaccine raises the antibody titers and decreases the mortality rate of the immunized mice infected with A. baumannii. Based on the results, DcaP and its indicated immunogen regions can be considered as a peptide or subunit vaccine. The immunogen regions could also be applied in multivalent subunit vaccine candidates against A. baumannii and other bacteria.

Comparative Phenotypic Analysis of Anabaena sp. PCC 7120 Mutants of Porinlike Genes

Porins are essential for the viability of Gram-negative bacteria. They ensure the uptake of nutrients, can be involved in the maintenance of outer membrane integrity and define the antibiotic or drug resistance of organisms. The function and structure of porins in proteobacteria is well described, while their function in photoautotrophic cyanobacteria has not been systematically explored. We compared the domain architecture of nine putative porins in the filamentous cyanobacterium Anabaena sp. PCC 7120 and analyzed the seven candidates with predicted OprB-domain. Single recombinant mutants of the seven genes were created and their growth capacity under different conditions was analyzed. Most of the putative porins seem to be involved in the transport of salt and copper, as respective mutants were resistant to elevated concentrations of these substances. In turn, only the mutant of alr2231 was less sensitive to elevated zinc concentrations, while mutants of alr0834, alr4741 and all4499 were resistant to high manganese concentrations. Notably the mutant of alr4550 shows a high sensitivity against harmful compounds, which is indicative for a function related to the maintenance of outer membrane integrity. Moreover, the mutant of all5191 exhibited a phenotype which suggests either a higher nitrate demand or an inefficient nitrogen fixation. The dependency of porin membrane insertion on Omp85 proteins was tested exemplarily for Alr4550, and an enhanced aggregation of Alr4550 was observed in two omp85 mutants. The comparative analysis of porin mutants suggests that the proteins in parts perform distinct functions related to envelope integrity and solute uptake.

Iron Acquisition Systems of Gram-negative Bacterial Pathogens Define TonB-Dependent Pathways to Novel Antibiotics

Iron is an indispensable metabolic cofactor in both pro- and eukaryotes, which engenders a natural competition for the metal between bacterial pathogens and their human or animal hosts. Bacteria secrete siderophores that extract Fe3+ from tissues, fluids, cells, and proteins; the ligand gated porins of the Gram-negative bacterial outer membrane actively acquire the resulting ferric siderophores, as well as other iron-containing molecules like heme. Conversely, eukaryotic hosts combat bacterial iron scavenging by sequestering Fe3+ in binding proteins and ferritin. The variety of iron uptake systems in Gram-negative bacterial pathogens illustrates a range of chemical and biochemical mechanisms that facilitate microbial pathogenesis. This document attempts to summarize and understand these processes, to guide discovery of immunological or chemical interventions that may thwart infectious disease.

The Whole Is Bigger than the Sum of Its Parts: Drug Transport in the Context of Two Membranes with Active Efflux

Cell envelope plays a dual role in the life of bacteria by simultaneously protecting it from a hostile environment and facilitating access to beneficial molecules. At the heart of this ability lie the restrictive properties of the cellular membrane augmented by efflux transporters, which preclude intracellular penetration of most molecules except with the help of specialized uptake mediators. Recently, kinetic properties of the cell envelope came into focus driven on one hand by the urgent need in new antibiotics and, on the other hand, by experimental and theoretical advances in studies of transmembrane transport. A notable result from these studies is the development of a kinetic formalism that integrates the Michaelis-Menten behavior of individual transporters with transmembrane diffusion and offers a quantitative basis for the analysis of intracellular penetration of bioactive compounds. This review surveys key experimental and computational approaches to the investigation of transport by individual translocators and in whole cells, summarizes key findings from these studies and outlines implications for antibiotic discovery. Special emphasis is placed on Gram-negative bacteria, whose envelope contains two separate membranes. This feature sets these organisms apart from Gram-positive bacteria and eukaryotic cells by providing them with full benefits of the synergy between slow transmembrane diffusion and active efflux.

OMPdb: A Global Hub of Beta-Barrel Outer Membrane Proteins

OMPdb (www.ompdb.org) was introduced as a database for β-barrel outer membrane proteins from Gram-negative bacteria in 2011 and then included 69,354 entries classified into 85 families. The database has been updated continuously using a collection of characteristic profile Hidden Markov Models able to discriminate between the different families of prokaryotic transmembrane β-barrels. The number of families has increased ultimately to a total of 129 families in the current, second major version of OMPdb. New additions have been made in parallel with efforts to update existing families and add novel families. Here, we present the upgrade of OMPdb, which from now on aims to become a global repository for all transmembrane β-barrel proteins, both eukaryotic and bacterial.

Functions of the BamBCDE Lipoproteins Revealed by Bypass Mutations in BamA

The heteropentomeric β-barrel assembly machine (BAM complex) is responsible for folding and inserting a diverse array of β-barrel outer membrane proteins (OMPs) into the outer membrane (OM) of Gram-negative bacteria. The BAM complex contains two essential proteins, the β-barrel OMP BamA and a lipoprotein BamD, whereas the auxiliary lipoproteins BamBCE are individually nonessential. Here, we identify and characterize three bamA mutations, the E-to-K change at position 470 (bamA_E470K ), the A-to-P change at position 496 (bamA_A496P ), and the A-to-S change at position 499 (bamA_A499S ), that suppress the otherwise lethal ΔbamD, ΔbamB ΔbamC ΔbamE, and ΔbamC ΔbamD ΔbamE mutations. The viability of cells lacking different combinations of BAM complex lipoproteins provides the opportunity to examine the role of the individual proteins in OMP assembly. Results show that, in wild-type cells, BamBCE share a redundant function; at least one of these lipoproteins must be present to allow BamD to coordinate productively with BamA. Besides BamA regulation, BamD shares an additional essential function that is redundant with a second function of BamB. Remarkably, bamA_E470K suppresses both, allowing the construction of a BAM complex composed solely of BamA^E470K that is able to assemble OMPs in the absence of BamBCDE. This work demonstrates that the BAM complex lipoproteins do not participate in the catalytic folding of OMP substrates but rather function to increase the efficiency of the assembly process by coordinating and regulating the assembly of diverse OMP substrates.IMPORTANCE The folding and insertion of β-barrel outer membrane proteins (OMPs) are conserved processes in mitochondria, chloroplasts, and Gram-negative bacteria. In Gram-negative bacteria, OMPs are assembled into the outer membrane (OM) by the heteropentomeric β-barrel assembly machine (BAM complex). In this study, we probe the function of the individual BAM proteins and how they coordinate assembly of a diverse family of OMPs. Furthermore, we identify a gain-of-function bamA mutant capable of assembling OMPs independently of all four other BAM proteins. This work advances our understanding of OMP assembly and sheds light on how this process is distinct in Gram-negative bacteria.

Vibrio campbellii chitoporin: Thermostability study and implications for the development of therapeutic agents against Vibrio infections

Vibrio campbellii (formerly Vibrio harveyi) is a bacterial pathogen that causes vibriosis, which devastates fisheries and aquaculture worldwide. V. campbellii expresses chitinolytic enzymes and chitin binding/transport proteins, which serve as excellent targets for antimicrobial agent development. We previously characterized VhChiP, a chitooligosaccharide-specific porin from the outer membrane of V. campbellii BAA-1116. This study employed far-UV circular dichroism and tryptophan fluorescence spectroscopy, together with single channel electrophysiology to demonstrate that the strong binding of chitoligosaccharides enhanced thermal stability of VhChiP. The alanine substitution of Trp¹³⁶ at the center of the affinity sites caused a marked decrease in the binding affinity and decreased the thermal stability of VhChiP. Tryptophan fluorescence titrations over a range of temperatures showed greater free-energy changes on ligand binding (ΔG°_binding) with increasing chain length of the chitooligosaccharides. Our findings suggest the possibility of designing stable channel-blockers, using sugar-based analogs that serve as antimicrobial agents, active against Vibrio infection.

Bacteriophage host range evolution through engineered enrichment bias, exploiting heterologous surface receptor expression

Research on the initial phage-host interaction has been conducted on a limited repertoire of phages and their cognate receptors, such as phage λ and the Escherichia coli LamB (EcLamB) protein. Apart from phage λ, little is known about other phages that target EcLamB. Here, we developed a simple method for isolating novel environmental phages in a predictable way, i.e. isolating phages that target a particular receptor(s) of a bacterium, in this case, the EcLamB protein. A plasmid (pMUT13) encoding the EcLamB porin was transferred into three different enterobacterial genera. By enrichment with these engineered bacteria, a number of phages (ZZ phages) that targeted EcLamB were easily isolated from the environment. Interestingly, although EcLamB-dependent in their recombinant heterologous hosts, these newly isolated ZZ phages also targeted OmpC as an alternative receptor when infecting E. coli. Moreover, the phage host range was readily extended within three different bacterial genera with heterologously expressed EcLamB. Unlike phage λ, which is a member of the Siphoviridae family, these newly isolated EcLamB-dependent phages were more commonly members of the Myoviridae family, based on transmission electron microscopy and genomic sequences. Modifications of this convenient and efficient phage enrichment method could be useful for the discovery of novel phages.

A Mathematical Model for the Kinetics of the MalFGK 2 Maltose Transporter

The MalFGK2 transporter regulates the movement of maltose across the inner membrane of E. coli and serves as a model system for bacterial ATP binding cassette (ABC) importers. Despite the wealth of biochemical and structural data available, a general model describing the various translocation pathways is still lacking. In this study, we formulate a mathematical model with the goal of determining the transporter reaction pathway, specifically looking at the order of binding events and conformation changes by which transport proceeds. Fitting our mathematical model to equilibrium binding data, we estimate the unknown equilibrium parameters of the system, several of which are key determinants of the transport process. Using these estimates along with steady-state ATPase rate data, we determine which of several possible reaction pathways is dominant, as a function of five underdetermined kinetic parameter values. Because neither experimental measurements nor estimates of certain kinetic rate constants are available, the problem of deciding which of the reaction pathways is responsible for transport remains unsolved. However, using the mathematical framework developed here, a firmer conclusion regarding the dominant reaction pathway as a function of MalE and maltose concentration could be drawn once these unknown kinetic parameters are determined.

Distinct patterns of mutational sensitivity for λ resistance and maltodextrin transport in Escherichia coli LamB

Bacteria can evade cohabiting phages through mutations in phage receptors, but these mutations may come at a cost if they disrupt the receptor's native cellular function. To investigate the relationship between these two conflicting activities, we generated sequence-function maps of Escherichia coli LamB with respect to sensitivity to phage λ and transport of maltodextrin. By comparing 413 missense mutations whose effect on both traits could be analysed, we find that these two phenotypes were correlated, implying that most mutations affect these phenotypes through a common mechanism such as loss of protein stability. However, individual mutations could be found that specifically disrupt λ-sensitivity without affecting maltodextrin transport. We identify and individually assay nine such mutations, whose spatial positions implicate loop L6 of LamB in λ binding. Although missense mutations that lead to λ-resistance are rare, they were approximately as likely to be maltodextrin-utilizing (Mal+) as not (Mal-), implying that E. coli can adapt to λ while conserving the receptor's native function. We propose that in order for E. coli and λ to stably cohabitate, selection for λ-resistance and maltose transport must be spatially or temporally separated.

Conformational rearrangements in the N-domain of Escherichia coli FepA during ferric enterobactin transport

The Escherichia coli outer membrane receptor FepA transports ferric enterobactin (FeEnt) by an energy- and TonB-dependent, but otherwise a mechanistically undetermined process involving its internal 150-residue N-terminal globular domain (N-domain). We genetically introduced pairs of Cys residues in different regions of the FepA tertiary structure, with the potential to form disulfide bonds. These included Cys pairs on adjacent β-strands of the N-domain (intra-N) and Cys pairs that bridged the external surface of the N-domain to the interior of the C-terminal transmembrane β-barrel (inter-N-C). We characterized FeEnt uptake by these mutants with siderophore nutrition tests, [⁵⁹Fe]Ent binding and uptake experiments, and fluorescence decoy sensor assays. The three methods consistently showed that the intra-N disulfide bonds, which restrict conformational motion within the N-domain, prevented FeEnt uptake, whereas most inter-N-C disulfide bonds did not prevent FeEnt uptake. These outcomes indicate that conformational rearrangements must occur in the N terminus of FepA during FeEnt transport. They also argue against disengagement of the N-domain out of the channel as a rigid body and suggest instead that it remains within the transmembrane pore as FeEnt enters the periplasm.

Binding of HasA by its transmembrane receptor HasR follows a conformational funnel mechanism

HasR in the outer membrane of Serratia marcescens binds secreted, heme-loaded HasA and translocates the heme to the periplasm to satisfy the cell's demand for iron. The previously published crystal structure of the wild-type complex showed HasA in a very specific binding arrangement with HasR, apt to relax the grasp on the heme and assure its directed transfer to the HasR-binding site. Here, we present a new crystal structure of the heme-loaded HasA arranged with a mutant of HasR, called double mutant (DM) in the following that seemed to mimic a precursor stage of the abovementioned final arrangement before heme transfer. To test this, we performed first molecular dynamics (MD) simulations starting at the crystal structure of the complex of HasA with the DM mutant and then targeted MD simulations of the entire binding process beginning with heme-loaded HasA in solution. When the simulation starts with the former complex, the two proteins in most simulations do not dissociate. When the mutations are reverted to the wild-type sequence, dissociation and development toward the wild-type complex occur in most simulations. This indicates that the mutations create or enhance a local energy minimum. In the targeted MD simulations, the first protein contacts depend upon the chosen starting position of HasA in solution. Subsequently, heme-loaded HasA slides on the external surface of HasR on paths that converge toward the specific arrangement apt for heme transfer. The targeted simulations end when HasR starts to relax the grasp on the heme, the subsequent events being in a time regime inaccessible to the available computing power. Interestingly, none of the ten independent simulation paths visits exactly the arrangement of HasA with HasR seen in the crystal structure of the mutant. Two factors which do not exclude each other could explain these observations: the double mutation creates a non-physiologic potential energy minimum between the two proteins and /or the target potential in the simulation pushes the system along paths deviating from the low-energy paths of the native binding processes. Our results support the former view, but do not exclude the latter possibility.

An integrated transport mechanism of the maltose ABC importer

ATP-binding cassette (ABC) transporters use the energy of ATP hydrolysis to transport a large diversity of molecules actively across biological membranes. A combination of biochemical, biophysical, and structural studies has established the maltose transporter MalFGK2 as one of the best characterized proteins of the ABC family. MalF and MalG are the transmembrane domains, and two MalKs form a homodimer of nucleotide-binding domains. A periplasmic maltose-binding protein (MalE) delivers maltose and other maltodextrins to the transporter, and triggers its ATPase activity. Substrate import occurs in a unidirectional manner by ATP-driven conformational changes in MalK2 that allow alternating access of the substrate-binding site in MalF to each side of the membrane. In this review, we present an integrated molecular mechanism of the transport process considering all currently available information. Furthermore, we summarize remaining inconsistencies and outline possible future routes to decipher the full mechanistic details of transport by MalEFGK2 complex and that of related importer systems.

Site-Directed Fluorescence Approaches for Dynamic Structural Biology of Membrane Peptides and Proteins

Membrane proteins mediate a number of cellular functions and are associated with several diseases and also play a crucial role in pathogenicity. Due to their importance in cellular structure and function, they are important drug targets for ~60% of drugs available in the market. Despite the technological advancement and recent successful outcomes in determining the high-resolution structural snapshot of membrane proteins, the mechanistic details underlining the complex functionalities of membrane proteins is least understood. This is largely due to lack of structural dynamics information pertaining to different functional states of membrane proteins in a membrane environment. Fluorescence spectroscopy is a widely used technique in the analysis of functionally-relevant structure and dynamics of membrane protein. This review is focused on various site-directed fluorescence (SDFL) approaches and their applications to explore structural information, conformational changes, hydration dynamics, and lipid-protein interactions of important classes of membrane proteins that include the pore-forming peptides/proteins, ion channels/transporters and G-protein coupled receptors.

High-Resolution Imaging of Maltoporin LamB while Quantifying the Free-Energy Landscape and Asymmetry of Sugar Binding

Maltoporins are a family of membrane proteins that facilitate the diffusion of hydrophilic molecules and maltosaccharides across the outer membrane of Gram-negative bacteria. Two contradicting models propose the sugar binding, uptake, and transport by maltoporins to be either symmetric or asymmetric. Here, we address this contradiction and introduce force-distance-based atomic force microscopy to image single maltoporin LamB trimers in the membrane at sub-nanometer resolution and simultaneously quantify the binding of different malto-oligosaccharides. We assay subtle differences of the binding free-energy landscape of maltotriose, maltotetraose, and maltopentaose, which quantifies how binding strength and affinity increase with the malto-oligosaccharide chain length. The ligand-binding parameters change considerably by mutating the extracellular loop 3, which folds into and constricts the transmembrane pore of LamB. By recording LamB topographs and structurally mapping binding events at sub-nanometer resolution, we observe LamB to preferentially bind maltodextrin from the periplasmic side, which shows sugar binding and uptake to be asymmetric. The study introduces atomic force microscopy as an analytical nanoscopic tool that can differentiate among the factors modulating and models describing the binding and uptake of substrates by membrane proteins.

Glucose transport via the pseudomonad porin OprB: implications for the design of Trojan Horse anti-infectives

Deciphering the transport through outer-membrane porins is crucial to understand how anti-infectives enter Gram-negative bacteria and perform their function. Here we elucidated the transport mechanism of substrates through the Pseudomonads sugar-specific porin OprB by means of multiscale modeling. We used molecular dynamics simulations to quantify the energetics of transport and thus a diffusion model to quantify the macroscopic flux of molecules through OprB. Our results show that Trp171 and several glutamate residues in the constriction region are key for the transport of glucose, the preferred natural substrate, through OprB. The unveiled transport mechanism suggests that 2-acetamido-1,2-dideoxynojirimycin (DNJ-NAc), an anti-infective structurally similar to glucose, can enter the cell via OprB. We quantified its energetics and macroscopic flux through OprB providing a comparative analysis with the natural substrate. Thus this pore can be considered as a promising gateway for exploiting the Trojan Horse strategy in pathogenic bacteria.

Membranes with Functionalized Nanopores for Aromaticity-Based Separation of Small Molecules

Membranes that can separate molecules of similar size based on chemical features could transform chemical manufacturing. We demonstrate membranes with functional, 1-3 nm pores prepared using a simple and scalable approach: coating a porous support with random copolymer micelles in alcohol, followed by precipitation in water and functionalization of pore surfaces. This approach was used to prepare membranes that can separate two hormones of similar size and charge, differentiated by aromaticity, mediated through π-π interactions between the aromatic solute and pore walls functionalized with phenol groups. The aromatic molecule permeates more slowly in single-solute experiments. In competitive diffusion experiments, however, it permeates 7.1 times faster than its nonaromatic analogue. This approach can be used to manufacture membranes for complex separations based on various intermolecular interactions.

Effects of H-bonds on sugar binding to chitoporin from Vibrio harveyi

BACKGROUND

VhChiP is a sugar-specific-porin present in the outer membrane of the marine bacterium Vibrio harveyi and responsible for chitin uptake, with a high selectivity for chitohexaose.

METHODS

VhChiP and its mutants were expressed and purified from BL21 (DE3) Omp8 Rosetta strain. After reconstitution into planar lipid bilayers, the ion current fluctuations caused by chitohexaose entering the channel were measured in deuterium oxide and in water.

RESULTS

The role of hydrogen-bonding in sugar binding was investigated by comparing channel occlusion by chitohexaose in buffers containing H₂O and D₂O. The BLM results revealed the significant contribution of hydrogen bonding to the binding of chitohexaose in the constriction zone of VhChiP. Replacing H₂O as solvent by D₂O significantly decreased the on- and off-rates of sugar penetration into the channel. The importance of hydrogen bonding inside the channel was more noticeable when the hydrophobicity of the constriction zone was diminished by replacing Trp¹³⁶ with the charged residues Asp or Arg. The on- and off-rates decreased up to 2.5-fold and 4-fold when Trp¹³⁶ was replaced by Arg, or 5-fold and 3-fold for Trp¹³⁶ replacement by Asp, respectively. Measuring the on-rate at different temperatures and for different channel mutants revealed the activation energy for chitohexaose entrance into VhChiP channel.

CONCLUSIONS

Hydrogen-bonds contribute to sugar permeation.

Structural features underlying recognition and translocation of extracellular polysaccharides

Essentially all living systems produce complex carbohydrates as an energy source, structural component, protective coat or adhesive for cell attachment. Many polysaccharides are displayed on the cell surface or are threaded through proteinaceous tunnels for degradation. Dictated by their chemical composition and mode of polymerization, the physical properties of complex carbohydrates differ substantially, from amphipathic water-insoluble polymers to highly hydrated hydrogel-forming macromolecules. Accordingly, diverse recognition and translocation mechanisms evolved to transport polysaccharides to their final destinations. This review will summarize and compare diverse polysaccharide transport mechanisms implicated in the biosynthesis and degradation of cell surface polymers in pro- and eukaryotes.

Chitosugar translocation by an unexpressed monomeric protein channel

The outer membrane protein channel EcChiP, associated with a silent gene in E. coli, is a monomeric chitoporin. In a glucose-deficient environment, E. coli can express the ChiP gene to exploit chitin degradation products. Single-channel small ion current measurements, which reveal the dynamics of single sugar molecules trapped in channel, are used here to study the exotic transport of chitosugars by E. coli. Molecules escape from the channel on multiple timescales. Voltage-dependent trapping rates observed for charged chitosan molecules, as well as model calculations, indicate that the rapid escape processes are those in which the molecule escapes back to the side of the membrane from which it originated. The probability that a sugar molecule is translocated through the membrane is thus estimated from the current data and the dependence of this translocation probability on the length of the chitosugar molecule and the applied voltage analyzed. The described method for obtaining the translocation probability and related molecular translocation current is applicable to other transport channels.

Single-Molecule Force Spectroscopy of Transmembrane β-Barrel Proteins

Single-molecule force spectroscopy (SMFS) has been widely applied to study the mechanical unfolding and folding of transmembrane proteins. Here, we review the recent progress in characterizing bacterial and human transmembrane β-barrel proteins by SMFS. First, we describe the mechanical unfolding of transmembrane β-barrels, which follows a general mechanism dictated by the sequential unfolding and extraction of individual β-strands and β-hairpins from membranes. Upon force relaxation, the unfolded polypeptide can insert stepwise into the membrane as single β-strands or β-hairpins to fold as the native β-barrel. The refolding can be followed at a high spatial and temporal resolution, showing that small β-barrels are able to fold without assistance, whereas large and complex β-barrels require chaperone cofactors. Applied in the dynamic mode, SMFS can quantify the kinetic and mechanical properties of single β-hairpins and reveal complementary insight into the membrane protein structure and function relationship. We further outline the challenges that SMFS experiments must overcome for a comprehensive understanding of the folding and function of transmembrane β-barrel proteins.

Outer Membrane Biogenesis

The hallmark of gram-negative bacteria and organelles such as mitochondria and chloroplasts is the presence of an outer membrane. In bacteria such as Escherichia coli, the outer membrane is a unique asymmetric lipid bilayer with lipopolysaccharide in the outer leaflet. Integral transmembrane proteins assume a β-barrel structure, and their assembly is catalyzed by the heteropentameric Bam complex containing the outer membrane protein BamA and four lipoproteins, BamB-E. How the Bam complex assembles a great diversity of outer membrane proteins into a membrane without an obvious energy source is a particularly challenging problem, because folding intermediates are predicted to be unstable in either an aqueous or a hydrophobic environment. Two models have been put forward: the budding model, based largely on structural data, and the BamA assisted model, based on genetic and biochemical studies. Here we offer a critical discussion of the pros and cons of each.

Understanding antibiotic resistance via outer membrane permeability

Collective antibiotic drug resistance is a global threat, especially with respect to Gram-negative bacteria. The low permeability of the bacterial outer cell wall has been identified as a challenging barrier that prevents a sufficient antibiotic effect to be attained at low doses of the antibiotic. The Gram-negative bacterial cell envelope comprises an outer membrane that delimits the periplasm from the exterior milieu. The crucial mechanisms of antibiotic entry via outer membrane includes general diffusion porins (Omps) responsible for hydrophilic antibiotics and lipid-mediated pathway for hydrophobic antibiotics. The protein and lipid arrangements of the outer membrane have had a strong impact on the understanding of bacteria and their resistance to many types of antibiotics. Thus, one of the current challenges is effective interpretation at the molecular basis of the outer membrane permeability. This review attempts to develop a state of knowledge pertinent to Omps and their effective role in solute influx. Moreover, it aims toward further understanding and exploration of prospects to improve our knowledge of physicochemical limitations that direct the translocation of antibiotics via bacterial outer membrane.

Outer membrane protein folding from an energy landscape perspective

The cell envelope is essential for the survival of Gram-negative bacteria. This specialised membrane is densely packed with outer membrane proteins (OMPs), which perform a variety of functions. How OMPs fold into this crowded environment remains an open question. Here, we review current knowledge about OMP folding mechanisms in vitro and discuss how the need to fold to a stable native state has shaped their folding energy landscapes. We also highlight the role of chaperones and the β-barrel assembly machinery (BAM) in assisting OMP folding in vivo and discuss proposed mechanisms by which this fascinating machinery may catalyse OMP folding.

The outer-membrane protein TolC of Vibrio cholerae serves as a second cell-surface receptor for the VP3 phage

Receptor recognition is a key step in the initiation of phage infection. Previously, we found that VP3, the T7 family phage of the Vibrio cholerae serogroup O1 biotype El Tor, can adsorb the core oligosaccharide (OS) of lipopolysaccharides of V. cholerae However, some wildtype strains of V. cholerae possessing the intact OS gene cluster still have VP3 binding but are resistant to VP3 infection. Moreover, an OS gene-deletion mutant still exhibits weak VP3 binding, suggesting multiple factors are possibly involved in VP3 binding to V. cholerae Here, we report that the outer-membrane protein TolC of V. cholerae is involved in the host adsorption of VP3. We observed that TolC directly interacts with the VP3 tail fiber protein gp44 and its C-terminal domains, and we also found that three amino acid residues in the outside loops of TolC, at positions 78, 290, and 291, are critical for binding to gp44. Among the VP3-resistant wildtype V. cholerae strains, frequent amino acid residue mutations were observed in the loops around the sites 78, 290, and 291, which were predicted to be exposed to the cell surface. These findings reveal a co-receptor-binding mechanism for VP3 infection of V. cholerae and that both outer-membrane TolC and OS are necessary for successful VP3 infection of V. cholerae We conclude that mutations on the outside loops of the receptor may confer V. cholerae strains with VP3 phage resistance, enabling these strains to survive in environments containing VP3 or related phages.

Engineering Enhanced Pore Sizes Using FhuA Δ1-160 from E. coli Outer Membrane as Template

Biological membranes are the perfect example of a molecular filter using membrane channels to control the permeability of small water-soluble molecules. To allow filtering of larger hydrophilic molecules we started from the known mutant channel FhuA Δ1-160 in which the cork domain closing the channel had been removed. Here we further expand the pore diameter by copying the amino acid sequence of two β-strands in a stepwise manner increasing the total number of β-strands from 22 to 34. The pore size of the respective expanded channel protein was characterized by single-channel conductance. Insertion of additional β-strands increased the pore conductance but also induced more ion current flickering on the millisecond scale. Further, polymer exclusion measurements were performed by analyzing single-channel conductance in the presence of differently sized polyethylene glycol of known polymer random coil radii. The conclusion from channel conductance of small channel penetrating polymers versus larger excluded ones suggested an increase in pore radii from 1.6 nm for FhuA Δ1-160 up to a maximum of about 2.7 nm for +8 β insertion. Integration of more β-strand caused instability of the channel and exclusion of smaller sized polymer. FhuA Δ1-160 + 10 β and FhuA Δ1-160 + 12 β effective radius decreased to 1.4 and 1.3 nm, respectively, showing the limitations of this approach.

Identification and Characterization of the Major Porin of Desulfovibrio vulgaris Hildenborough

Due in large part to their ability to facilitate the diffusion of a diverse range of solutes across the outer membrane (OM) of Gram-negative bacteria, the porins represent one of the most prominent and important bacterial membrane protein superfamilies. Notably, for the Gram-negative bacterium Desulfovibrio vulgaris Hildenborough, a model organism for studies of sulfate-reducing bacteria, no genes for porins have been identified or proposed in its annotated genome. Results from initial biochemical studies suggested that the product of the DVU0799 gene, which is one of the most abundant proteins of the D. vulgaris Hildenborough OM and purified as a homotrimeric complex, was a strong porin candidate. To investigate this possibility, this protein was further characterized biochemically and biophysically. Structural analyses via electron microscopy of negatively stained protein identified trimeric particles with stain-filled depressions and structural modeling suggested a β-barrel structure for the monomer, motifs common among the known porins. Functional studies were performed in which crude OM preparations or purified DVU0799 was reconstituted into proteoliposomes and the proteoliposomes were examined for permeability against a series of test solutes. The results obtained establish DVU0799 to be a pore-forming protein with permeability properties similar to those observed for classical bacterial porins, such as those of Escherichia coli. Taken together, these findings identify this highly abundant OM protein to be the major porin of D. vulgaris Hildenborough. Classification of DVU0799 in this model organism expands the database of functionally characterized porins and may also extend the range over which sequence analysis strategies can be used to identify porins in other bacterial genomes.

IMPORTANCE Porins are membrane proteins that form transmembrane pores for the passive transport of small molecules across the outer membranes of Gram-negative bacteria. The present study identified and characterized the major porin of the model sulfate-reducing bacterium Desulfovibrio vulgaris Hildenborough, observing its preference for anionic sugars over neutral ones. Its predicted architecture appears to be novel for a classical porin, as its core β-barrel structure is of a type typically found in solute-specific channels. Broader use of the methods employed here, such as assays for channel permeability and electron microscopy of purified samples, is expected to help expand the database of confirmed porin sequences and improve the range over which sequence analysis-based strategies can be used to identify porins in other Gram-negative bacteria. Functional characterization of these critical gatekeeping proteins from divergent Desulfovibrio species should offer an improved understanding of the physiological features that determine their habitat range and supporting activities.

Functional analysis of an unusual porin-like channel that imports chitin for alternative carbon metabolism in Escherichia coli

Escherichia coli have the genetic potential to use chitin as a carbon source in the absence of glucose, importing it via the chitin-uptake channel EcChiP for processing by the glucosamine catabolic pathway. The chip gene is usually not expressed when E. coli are grown on glucose-enriched nutrients, providing a general regulatory mechanism for the pathway. EcChiP is unusual in that it is homologous to porins and monomeric instead of trimeric, the typical form of sugar-specific channels, making it unclear how this channel operates. We recently reported that EcChiP could form a stable channel in lipid membranes and that the channel is specific for chitooligosaccharides. This report describes the biophysical nature of sugar-channel interactions and the kinetics of sugar association and dissociation. Titrating EcChiP with chitohexaose resulted in protein fluorescence enhancement in a concentration-dependent manner, yielding a binding constant of 2.9 × 10⁵ m^-1, consistent with the value of 2.5 × 10⁵ m^-1 obtained from isothermal titration microcalorimetry. Analysis of the integrated heat change suggested that the binding process was endothermic and driven by entropy. Single-channel recordings confirmed the voltage dependence of the penetration of chitohexaose molecules into and their release from EcChiP. Once inside the pore, the sugar release rate (k_off) from the affinity site increased with elevated voltage, regardless of the side of sugar addition. Our findings revealed distinct thermodynamic and kinetic features of the activity of sugar-specific EcChiP and advance our knowledge of the physiological possibility of chitin utilization by non-chitinolytic bacteria.

Super-Resolution Imaging of Protein Secretion Systems and the Cell Surface of Gram-Negative Bacteria

Gram-negative bacteria have a highly evolved cell wall with two membranes composed of complex arrays of integral and peripheral proteins, as well as phospholipids and glycolipids. In order to sense changes in, respond to, and exploit their environmental niches, bacteria rely on structures assembled into or onto the outer membrane. Protein secretion across the cell wall is a key process in virulence and other fundamental aspects of bacterial cell biology. The final stage of protein secretion in Gram-negative bacteria, translocation across the outer membrane, is energetically challenging so sophisticated nanomachines have evolved to meet this challenge. Advances in fluorescence microscopy now allow for the direct visualization of the protein secretion process, detailing the dynamics of (i) outer membrane biogenesis and the assembly of protein secretion systems into the outer membrane, (ii) the spatial distribution of these and other membrane proteins on the bacterial cell surface, and (iii) translocation of effector proteins, toxins and enzymes by these protein secretion systems. Here we review the frontier research imaging the process of secretion, particularly new studies that are applying various modes of super-resolution microscopy.

Membrane integration of an essential β-barrel protein prerequires burial of an extracellular loop

The Bam complex assembles β-barrel proteins into the outer membrane (OM) of Gram-negative bacteria. These proteins comprise cylindrical β-sheets with long extracellular loops and create pores to allow passage of nutrients and waste products across the membrane. Despite their functional importance, several questions remain about how these proteins are assembled into the OM after their synthesis in the cytoplasm and secretion across the inner membrane. To understand this process better, we studied the assembly of an essential β-barrel substrate for the Bam complex, BamA. By mutating conserved residues in the β-barrel domain of this protein, we generated three assembly-defective BamA substrates that stall early in the folding process in the periplasm. Two of the three defective substrates, which harbor mutations within β-strands, fail to associate productively with the Bam complex. The third substrate, which harbors mutations in a conserved extracellular loop, accumulates on BamD during assembly, but does not integrate efficiently into the membrane. The assembly of all three substrates can be restored by artificially tethering a region of the substrate, which ultimately becomes an extracellular loop, to the lumen of the forming β-barrel. These results imply that a critical step in the folding process involves the interaction of residues on the interior of the nascent β-barrel wall with residues in one of the extracellular loops. We conclude that a prerequisite for membrane integration of β-barrel proteins is burial of the extracellular loops within the forming β-barrel.

Correlated trapping of sugar molecules by the trimeric protein channel chitoporin

The protein channel chitoporin (ChiP), which is used by marine bacteria to translocate selected sugar molecules through the outer cell membrane, is studied via single channel current measurements in water and heavy water sugar solutions. The dynamic trapping and escape probabilities of sugar molecules from different monomers in the trimeric channel are characterized, including their dependence on channel orientation and sensitivity to a deuterium isotope effect. A detailed analysis of stochastic current fluctuations reveals that the trapping properties of chitoporin exhibit memory effects: the rate of trapping transitions depends on the previous sequence of transitions; and intermonomer correlations: the average trapping rate of an unblocked monomer is larger when its neighboring monomers are blocked. The latter, likely resulting from rapid re-trapping of recently escaped sugar molecules, is considered as a possible design strategy to enhance sugar transport.

Properties and Phylogeny of 76 Families of Bacterial and Eukaryotic Organellar Outer Membrane Pore-Forming Proteins

We here report statistical analyses of 76 families of integral outer membrane pore-forming proteins (OMPPs) found in bacteria and eukaryotic organelles. 47 of these families fall into one superfamily (SFI) which segregate into fifteen phylogenetic clusters. Families with members of the same protein size, topology and substrate specificities often cluster together. Virtually all OMPP families include only proteins that form transmembrane pores. Nine such families, all of which cluster together in the SFI phylogenetic tree, contain both α- and β-structures, are multi domain, multi subunit systems, and transport macromolecules. Most other SFI OMPPs transport small molecules. SFII and SFV homologues derive from Actinobacteria while SFIII and SFIV proteins derive from chloroplasts. Three families of actinobacterial OMPPs and two families of eukaryotic OMPPs apparently consist primarily of α-helices (α-TMSs). Of the 71 families of (putative) β-barrel OMPPs, only twenty could not be assigned to a superfamily, and these derived primarily from Actinobacteria (1), chloroplasts (1), spirochaetes (8), and proteobacteria (10). Proteins were identified in which two or three full length OMPPs are fused together. Family characteristic are described and evidence agrees with a previous proposal suggesting that many arose by adjacent β-hairpin structural unit duplications.

Labeling and Selective Inactivation of Gram-Positive Bacteria Employing Bimodal Photoprobes with Dual Readouts

Carbohydrate-conjugated silicon(IV) phthalocyanines with bimodal photoactivity were developed as probes with both fluorescent labeling and photosensitizing capabilities, and the concomitant fluorescent labeling and photoinduced inactivation of Gram-positive and Gram-negative models was explored. The maltohexaose-conjugated photoprobe provides a dual readout to distinguish between both groups of pathogens, as only the Gram-positive species was inactivated, even though both appeared labeled with near-infrared luminescence. Antibiotic resistance did not hinder the phototoxic effect, as even the methicillin-resistant pathogen Staphylococcus aureus (MRSA) was completely photoinactivated. Time-resolved confocal fluorescence microscopy analysis suggests that the photoprobe sticks onto the outer rim of the microorganisms, explaining the resistance of Gram-negative species on the basis of their membrane constitution. The mannose-conjugated photoprobe yields a different readout because it is able to label and to inactivate only the Gram-positive strain.

Characteristics of Sucrose Transport through the Sucrose-Specific Porin ScrY Studied by Molecular Dynamics Simulations

Sucrose-specific porin (ScrY) is a transmembrane protein that allows for the uptake of sucrose under growth-limiting conditions. The crystal structure of ScrY was resolved before by X-ray crystallography, both in its uncomplexed form and with bound sucrose. However, little is known about the molecular characteristics of the transport mechanism of ScrY. To date, there has not yet been any clear demonstration for sucrose transport through the ScrY. Here, the dynamics of the ScrY trimer embedded in a phospholipid bilayer as well as the characteristics of sucrose translocation were investigated by means of atomistic molecular dynamics (MD) simulations. The potential of mean force (PMF) for sucrose translocation through the pore showed two main energy barriers within the constriction region of ScrY. Energy decomposition allowed to pinpoint three aspartic acids as key residues opposing the passage of sucrose, all located within the L3 loop. Mutation of two aspartic acids to uncharged residues resulted in an accordingly modified electrostatics and decreased PMF barrier. The chosen methodology and results will aid in the design of porins with modified transport specificities.