Covalent organic frameworks comprising cobalt porphyrins for catalytic CO₂ reduction in water

Protonated Z-scheme CdS-covalent organic framework heterojunction with highly efficient photocatalytic hydrogen evolution

The low efficiency of photocatalytic hydrogen production from water is mainly suffer from limited light absorption, charge separation and water delivery to the active centers. Herein, an inorganic-organic Z-scheme heterojunction (CdS-COF-Ni) is constructed by in-situ growth of CdS nanosheets on the porphyrin-based covalent organic framework with nickel ions (COF-Ni) in the porphyrin centers. A built-in electric field is formed at the interface, which accelerates the separation and transfer of photogenerated charges. Moreover, through the surface protonation treatment in ascorbic acid (AC) solution, the hydrophilicity of the obtained composite is obviously increased and facilitates the transport of water molecules to the photocatalytic centers. Under the synergistic effect of the interfacial interaction and surface protonation treatment, the photocatalytic hydrogen production rate is optimized to be 18.23 mmol h-1 g-1 without adding any cocatalysts, which is 21 times that of CdS. After a series of photoelectrochemical measurements, in situ X-ray photoelectron spectroscopy (XPS) analysis, and density functional theory (DFT) calculations, it is found that the photocatalytic charge transfer pathway conforms to the Z-scheme mechanism, which not only greatly accelerates the separation and transfer of photogenerated charges, but also retains a high reduction capacity for water splitting. This work offers a good strategy for constructing highly efficient organic-inorganic heterojunctions for water splitting.

Analysis of okadaic acid using electrochemiluminescence imaging on microfluidic biosensing chip

The sensitivity and specificity of electrochemiluminescence (ECL)-based biosensor directly rely on the property of luminophor, the type of sensing carriers and the effectiveness of signal amplification used in the sensor design, which poses a major challenge to manage these elements simultaneously. In this work, an aggregation-induced electrochemiluminescence (AIECL) microfluidic sensing chip using 4',4″,4‴,4‴'-(ethene-1,1,2,2-tetrayl)tetrabiphenyl-4-carboxylic acid (TPE)-derived hafnium-based metal-organic framework (Hf-MOF) as emitter was developed. An easily overlooked marine pollutant, okadaic acid (OA) with different concentrations ranging from 5.00 ng/mL to 1.50 × 104 ng/mL at the electrode is visualized imaging benefit from high luminescence efficiency of Hf-MOF coupled the rolling circle amplification strategy assisted by trans-cleavage activity of CRISPR/Cas12a. These highlights will solve the long-lasting task in the accurate analysis of small molecule pollutants, which can be able to provide more worthy reference solution about construction of novel ECL luminophor and signal extraction of low-abundance disease-related biomarkers.

Wiring Covalent Organic Frameworks with Conducting Polymers

Covalent organic frameworks are a class of crystalline porous polymers formed by linking organic units into periodically aligned skeletons and pores. Here we report a strategy for wiring these frameworks with conducting polymers via wall engineering and polymerization. We anchored each edge site with one pyrrole unit, which is densely packed along the z direction yet protruded from pore walls. This assembly enables the polymerization of pyrrole units to form polypyrrole and creates a new polypyrrole chain conformation. The resultant framework constitutes six single file polypyrrole chains in each pore and develop spatially segregated yet built-in single molecular wires with exceptional stable polarons. Hall effect measurements revealed that the materials are p-type semiconductors, increase conductivity by eight orders of magnitude compared to the pristine frameworks, and achieve a carrier mobility as large as 13.2 cm2 V-1 s-1. Our results open an avenue to π electronic frameworks by interlayer molecular wiring with conducting polymers.

Recent Advances in Immobilizing and Benchmarking Molecular Catalysts for Artificial Photosynthesis

Transition metal complexes have been widely used as catalysts or chromophores in artificial photosynthesis. Traditionally, they are employed in homogeneous settings. Despite their functional versatility and structural tunability, broad industrial applications of these catalysts are impeded by the limitations of homogeneous catalysis such as poor catalyst recyclability, solvent constraints (mostly organic solvents), and catalyst durability. Over the past few decades, researchers have developed various methods for molecular catalyst heterogenization to overcome these limitations. In this review, we summarize recent developments in heterogenization strategies, with a focus on describing methods employed in the heterogenization process and their effects on catalytic performances. Alongside the in-depth discussion of heterogenization strategies, this review aims to provide a concise overview of the key metrics associated with heterogenized systems. We hope this review will aid researchers who are new to this research field in gaining a better understanding.

Electrolyte Composition-Dependent Product Selectivity in CO2 Reduction with a Porphyrinic Metal-Organic Framework Catalyst

A copper porphyrin-derived metal-organic framework electrocatalyst, FICN-8, was synthesized and its catalytic activity for CO2 reduction reaction (CO2RR) was investigated. FICN-8 selectively catalyzed electrochemical reduction of CO2 to CO in anhydrous acetonitrile electrolyte. However, formic acid became the dominant CO2RR product with the addition of a proton source to the system. Mechanistic studies revealed the change of major reduction pathway upon proton source addition, while catalyst-bound hydride (*H) species was proposed as the key intermediate for formic acid production. This work highlights the importance of electrolyte composition on CO2RR product selectivity.

Self-Aggregation Control of Porphyrin for Enhanced Selective Covalent Organic Network Membranes

Covalent organic networks (CONs) are considered ideal for precise molecular separation compared with traditional polymer membranes because their pores have a sharp molecular weight cut-off and a robust structure. However, challenges remain with regard to tuning pores as a prerequisite for facile membrane fabrication to a defect-free layer. Herein, a highly conjugated amino-porphyrin is used and exploited its tunable stacking behavior to fabricate porphyrin-based polyamide CONs with ordered structures through interfacial polymerization with acyl chlorides. Controlling the self-aggregation behavior of the porphyrin and the conformation of the acyl chlorides can create different covalent networks. Acid-triggered porphyrin protonation offsets stacking to reduce the pore in the network from mesopore to micropore, enabling selective molecule transport. Furthermore, different acyl chloride ligands are used to control the interlayer bonding in CONs. Accordingly, the tailored pore diameters (0.48-0.78 nm) are confirmed by the molecule rejections with performance stability over 25 days of operation, as well as under various conditions. This study leverages porphyrin chemistry and interfacial polymerization to fabricate a defect-free CON layer with a significantly lower molecular weight cut-off (< 330 Da) than previously reported porphyrin-based membranes (>800 Da). This will pave the way for the development of ideal topological membranes.

Recent advances on COF-based single-atom and dual-atom sites for oxygen catalysis

Covalent organic frameworks (COFs) have emerged as promising platforms for the construction of single-atom and dual-atom catalysts (SACs and DACs), owing to their well-defined structures, tunable pore sizes, and abundant active sites. In recent years, the development of COF-based SACs and DACs as highly efficient catalysts has witnessed a remarkable surge. The synergistic interplay between the metal active sites and the COF has established the design and fabrication of COF-based SACs and DACs as a prominent research area in electrocatalysis. These catalytic materials exhibit promising prospects for applications in energy storage and conversion devices. This review summarizes recent advances in the design, synthesis, and applications of COF-based SACs and DACs for oxygen catalysis. The catalytic mechanisms of the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are comprehensively explored, providing a comparative analysis to elucidate the correlation between the structure and performance, as well as their functional attributes in battery devices. This review highlights a promising approach for future research, emphasizing the necessity of rational design, breakthroughs, and in-situ characterization to further advance the development of high-performance COF-based SACs and DACs for sustainable energy applications.

Chemically robust functionalized covalent organic framework for the highly efficient and selective separation of bromine

Effective sequestration of bromine holds great promise for the chemical industry's safe expansion, environmental preservation, and public health. However, attaining this goal is still challenging due to the serious drawbacks of existing adsorbents such as limited capacity, low retention efficiency, and sluggish uptake kinetics. Herein, we report a strategy-driven systematic study aimed at significantly enhancing multiple host-guest interactions to obtain functionalized covalent-organic frameworks for the efficient sequestration of bromine. Results showed that the presence of specific quantities of selective binding sites of the porous frameworks afford stronger host-guest interactions and therefore higher bromine adsorption capacities. The developed framework exhibits high bromine sorption capacity of up to 5.16 g g-1 in the vapor phase and 8.79 g g-1 in the aqueous phase under static adsorption conditions with fast kinetics, large distribution coefficient (Kd ∼105 mL g-1), high retention efficiency and reusability. Moreover, the adsorbent is able to sequestrate trace bromine (from 13 ppm to below 4 ppm) from aqueous medium with fast adsorption kinetics (86.3% within less than 3 h) and demonstrates the selective extraction of bromine over iodine under both static and dynamic conditions. These results were further utilized to demonstrate recycling-selective and highly efficient bromine capture from a real-water system, exhibiting excellent scalability and affordability, as exemplified using COF membranes in a continuous flow-through process.

Dynamic Two-Dimensional Covalent Organic Frameworks with Large Solvent-Induced Lattice Expansion

Dynamic covalent organic frameworks (COFs) can switch reversibly between crystalline phases with different unit cell parameters and porosities upon physisorption of guest molecules. While impressive changes in unit cell volumes have been realized for three-dimensional frameworks, the solvent-induced volume changes of two-dimensional (2D) COFs have remained comparably small. We have now developed a series of 2D COFs where we systematically varied the length of the interconnecting bridge units. The optimized materials achieve solvent-induced expansions of up to 85% relative to the volume of the solvent-free contracted COFs. These structural changes are fully reversible and the frameworks fully retain their high degree of crystalline order. This study introduces a versatile design strategy for dynamic 2D COFs, which could enable future applications of these materials in gas separation and sensing.

Asymmetric Cu-N1O3 Sites Coupling Atop-type and Bridge-type Adsorbed *C1 for Electrocatalytic CO2-to-C2 Conversion

2D functional porous frameworks offer a platform for studying the structure-activity relationships during electrocatalytic CO2 reduction reaction (CO2RR). Yet challenges still exist to breakthrough key limitations on site configuration (typical M-O4 or M-N4 units) and product selectivity (common CO2-to-CO conversion). Herein, a novel 2D metal-organic framework (MOF) with planar asymmetric N/O mixed coordinated Cu-N1O3 unit is constructed, labeled as BIT-119. When applied to CO2RR, BIT-119 could reach a CO2-to-C2 conversion with C2 partial current density ranging from 36.9 to 165.0 mA cm-2 in flow cell. Compared to the typical symmetric Cu-O4 units, asymmetric Cu-N1O3 units lead to the re-distribution of local electron structure, regulating the adsorption strength of several key adsorbates and the following catalytic selectivity. From experimental and theoretical analyses, Cu-N1O3 sites could simultaneously couple the atop-type (on Cu site) and bridge-type (on Cu-N site) adsorption of *C1 species to reach the CO2-to-C2 conversion. This work broadens the feasible C-C coupling mechanism on 2D functional porous frameworks.

A nickel porphyrin-based covalent organic framework modified electrode for the electrochemical detection of acetaminophen

Covalent organic frameworks (COFs) can be rationally designed with functional organic ligands to improve the electrochemical responsiveness of the electrode toward certain medicinal compounds. In this study, we synthesized a COF-Ni electrocatalyst material, which is formed by covalent coupling of electron-rich 2,3,6,7-tetrakis (4-formylphenyl) tetrakis (4-imidazolyl) (TTF-4CHO) and hole-rich 5,10,15,20-tetrakis (4-aminophenyl) porphyrin nickel(II) (TAPP-Ni). The reasonable electron transfer path design, the large specific surface area of the COF and the physical properties of ordered nanopores, as well as the Ni-N4 bond as a highly active catalytic center, allow the COF-Ni material modified electrode to exhibit excellent sensing performance for acetaminophen (ACOP). The detection limit for ACOP is as low as 47.6 nM, with a linear range of 1-1500 μM, which is better than for most of the reported sensors. With superior interference resistance and good stability performance, COF-Ni is a highly suited electrode modification material for real-world sample detection, which provided a new perspective for application of COF materials in drug analysis.

Recent Advances in Bonding Regulation of Metalloporphyrin-Modified Carbon-Based Catalysts for Accelerating Energy Electrocatalytic Applications

Metalloporphyrins modified carbon-based materials, owing to the excellent acid-base resistance, optimal electron transfer rates, and superior catalytic performance, have shown great potential in energy electrocatalysis. Recently, numerous efforts have concentrated on employing carbon-based substrates as platforms to anchor metalloporphyrins, thereby fabricating a diverse array of composite catalysts tailored for assorted electrocatalytic processes. However, the interplay through bonding regulation of metalloporphyrins with carbon materials and the resultant enhancement in catalyst performance remains inadequately elucidated. Gaining an in-depth comprehension of the synergistic interactions between metalloporphyrins and carbon-based materials within the realm of electrocatalysis is imperative for advancing the development of innovative composite catalysts. Herein, the review systematically classifies the binding modes (i.e., covalent grafting and non-covalent interactions) between carbon-based materials and metalloporphyrins, followed by a discussion on the structural characteristics and applications of metalloporphyrins supported on various carbon-based substrates, categorized according to their binding modes. Additionally, this review underscores the principal challenges and emerging opportunities for carbon-supported metalloporphyrin composite catalysts, offering both inspiration and methodological insights for researchers involved in the design and application of these advanced catalytic systems.

Rigidly Axial O Coordination-Induced Spin Polarization on Single Ni-N4-C Site by MXene Coupling for Boosting Electrochemical CO2 Reduction to CO

Regulating the spin states in transition-metal (TM)-based single-atom catalysts (SACs), such as the TM-Nx-C configurations, is crucial for improving the catalytic activity. However, the role of spin in single Ni atoms facilitating the electrochemical CO2 reduction reaction (CO2RR) has been largely overlooked. Using first-principles simulations, we investigated the electrocatalytic performance of Ni-N4-C SACs vertically stacked on the O-terminated MXene nanosheets for the CO2RR. The terminated O atoms on MXene axially interact with the Ni atom due to significant charge transfer between them. Unlike the pure Ni-N4 site, which lacks spin polarization, the newly formed Ni-N4O configuration breaks the spin degeneracy of Ni d orbitals, dramatically lifting the energy level of spin-down d orbitals relative to that of spin-up d orbitals. As a result, the d electrons of Ni in the two spin channels are rearranged, leading to large net spin moments of 1.4 μB. Compared to the Ni-N4 site, the partially filled minority-spin dz2 orbitals of Ni on Ni-N4O weaken the occupied d-π* orbitals between Ni and *COOH, significantly stabilizing the key intermediate. The detailed reaction mechanisms and energetics show that four MXenes, namely, Hf3C2, Zr3C2, Hf2C, and Zr2C, can induce a large spin on the Ni site, thereby improving catalytic activity for CO2 reduction to CO, with a lower onset potential of about -0.75 V vs SHE compared to pure Ni SACs (-1.17 V) according to the potential-constant model with an explicit solvent environment.

Selective Generation of Reactive Oxygen Species in Photocatalytic Oxidation by Tuning Porphyrin-Based COFs' Dimensionality

Regulating the selective generation of reactive oxygen species (ROS) is a significant challenge in the field of photocatalytic oxidation, with successful approaches still being limited. Herein, we present a strategy to selectively generate singlet oxygen (1O2) and superoxide radicals (O2•-) by tuning the dimensionality of porphyrin-based covalent organic frameworks (COFs). The transformation of COFs from three-dimensional (3D) solids to two-dimensional (2D) sheets was achieved through the reversible protonation of the imine bond. Upon irradiation, both bulk and thin-layer COF-367 can transfer energy to O2 to generate 1O2. However, thin-layer COF-367 exhibited a superior performance compared to its bulk counterpart in activating O2 to form the O2•- radicals via electron transfer. After excluding the influences of the band structure, O2 adsorption energy, and frontier orbital composition attributed to the dimensionality of the COFs, it is reasonably speculated that the variance in ROS generation arises from the differential exposure ratios of the active surfaces, leading to distinct reaction pathways between the carrier and O2. This study is the first to explore the modulation mechanism of COF dimensionality on the activation of the O2 pathway, underscoring the importance of considering COF dimensionality in photocatalytic reactions.

State of Play of Critical Mineral-Based Catalysts for Electrochemical E-Refinery to Synthetic Fuels

The pursuit of decarbonization involves leveraging waste CO2 for the production of valuable fuels and chemicals (e.g., ethanol, ethylene, and urea) through the electrochemical CO2 reduction reactions (CO2RR). The efficacy of this process heavily depends on electrocatalyst performance, which is generally reliant on high loading of critical minerals. However, the supply of these minerals is susceptible to shortage and disruption, prompting concerns regarding their usage, particularly in electrocatalysis, requiring swift innovations to mitigate the supply risks. The reliance on critical minerals in catalyst fabrication can be reduced by implementing design strategies that improve the available active sites, thereby increasing the mass activity. This review seeks to discuss and analyze potential strategies, challenges, and opportunities for improving catalyst activity in CO2RR with a special attention to addressing the risks associated with critical mineral scarcity. By shedding light onto these aspects of critical mineral-based catalyst systems, this review aims to inspire the development of high-performance catalysts and facilitates the practical application of CO2RR technology, whilst mitigating adverse economic, environmental, and community impacts.

Covalent Organic Frameworks for Electrocatalysis: Design, Applications, and Perspectives

Covalent organic frameworks (COFs) are an innovative class of crystalline porous polymers composed of light elements such as C, N, O, etc., linked by covalent bonds. The distinctive properties of COFs, including designable building blocks, large specific surface area, tunable pore size, abundant active sites, and remarkable stability, have led their widespread applications in electrocatalysis. In recent years, COF-based electrocatalysts have made remarkable progress in various electrocatalytic fields, including the hydrogen evolution reaction, oxygen evolution reaction, oxygen reduction reaction, nitrogen reduction reaction, nitrate reduction reaction, and carbon dioxide reduction reaction. This review begins with an introduction to the design and synthesis strategies employed for COF-based electrocatalysts. These strategies include heteroatom doping, metalation of COF and building monomers, encapsulation of active sites within COF pores, and the development of COF-based derived materials. Subsequently, a systematic overview of the recent advancements in the application of COF-based catalysts in electrocatalysis is presented. Finally, the review discusses the main challenges and outlines possible avenues for the future development of COF-based electrocatalysts.

Multiwalled Carbon Nanotube-Templated Nickel Porphyrin Covalent Organic Framework for Pencil-Drawn Noninvasive Respiration Sensors

Paper-integrated configuration with miniaturized functionality represents one of the future main green electronics. In this study, a paper-based respiration sensor was prepared using a multiwalled carbon nanotube-templated nickel porphyrin covalent organic framework (MWCNTs@COFNiP-Ph) as an electrical identification component and pencil-drawn graphite electric circuits as interdigitated electrodes (IDEs). The MWCNTs@COFNiP-Ph not only inherited the high gas sensing performance of porphyrin and the aperture induction effect of COFs but also overcame the shielding effect between phases through the MWCNT template. Furthermore, it possessed highly exposed M-N4 metallic active sites and unique periodic porosity, thereby effectively addressing the key technical issue of room-temperature sensing for the respiration sensor. Meanwhile, the introduction of a pencil-drawing approach on common printing papers facilitates the inexpensive and simple manufacturing of the as-fabricated graphite IDE. Based on the above advantages, the MWCNTs@COFNiP-Ph respiration sensor had the characteristics of wide detection range (1-500 ppm), low detection limit (30 ppb), acceptable flexibility for toluene, and rapid response/recovery time (32 s/116 s). These advancements facilitated the integration of the respiration sensor into surgical masks and clothes with maximum functionality at a minimized size and weight. Moreover, the primary internal mechanism of COFNiP-Ph for this efficient toluene detection was investigated through in situ FTIR spectra, thereby directly elucidating that the chemisorption interaction of oxygen modulated the depletion layers, resulting in alterations in sensor resistance upon exposure to the target gas. The encouraging results revealed the feasibility of employing a paper-sensing system as a wearable platform in green electronics.

Quasi-One-Dimensional Zigzag Covalent Organic Frameworks for Photocatalytic Hydrogen Evolution from Water

Covalent organic frameworks (COFs) have potential applications in a wide range of fields. However, it remains a critical challenge to constrain their covalent expansions in the one-dimensional (1D) direction. Here, we developed a general approach to fabricate 15 different highly crystalline COFs with zigzag-packed 1D porous organic chains through the condensation of V-shaped ditopic linkers and X-shaped tetratopic knots. Appropriate geometrical combinations of a wide scope of linkers and knots with distinct aromatic cores, linkages, and functionalities offer a series of quasi-1D COFs with dominant pore sizes of 7-13 Å and surface areas of 116-784 m2 g-1. Among them, nitrogen (N)-doped 1D COFs with site-specific doping of heteroatoms favor a tunable control of band structures and conjugations and thus allow a remarkable hydrogen evolution rate up to 80 mmol g-1 h-1 in photocatalytic water splitting. This general strategy toward programming function in porous crystalline materials has the potential to tune the topologically well-defined electronic properties through precisely periodic doping.

Supramolecular Polymer Frameworks with Controlled and Uniform Pore Apertures

Porous frameworks with controlled pore structure and tunable aperture are greatly demanded. However, precise synthesis of this kind of materials is a formidable challenge. Herein, we report the fabrication of two-dimensional (2D) supramolecular polymer frameworks using a precisely synthesized rod-like helical polyisocyanide as link. Four three-arm star-shaped polyisocyanides with the degree of the polymerization of 10, 20, 30 and 40, and having 2-ureido-4[1H]-pyrimidinone (UPy) terminals were synthesized. 2D-Crystalline polymer frameworks with apertures of 5.3, 10.1, 13.9, and 19.1 nm were respectively obtained through intermolecular hydrogen bonding interaction between the terminal Upy units. The pore aperture is dependent on the length of polyisocyanide backbone. Thus, well-defined supramolecular polymer frameworks with controlled and uniform hexagonal pores were obtained, as proved by small-angle X-ray scattering (synchrotron radiation facility), atomic force microscopy, and Brunauer-Emmett-Teller analyses. The frameworks with uniform large pore aperture were used to purify nanomaterials and immobilize biomacromolecules. For instance, the membranes of the polymer frameworks could size-fractionation of silver nanoparticles into uniform nanoparticles with very low dispersity. The frameworks with large aperture facilitated the inclusion of myoglobin and enhanced the stability and catalytic activity.

3D Covalent Organic Frameworks with 16-Connectivity for Photocatalytic C(sp3)-C(sp2) Cross-Coupling

The connectivity (valency) of building blocks for constructing 3D covalent organic frameworks (COFs) has long been limited to 4, 6, 8, and 12. Developing a higher connectivity remains a great challenge in the field of COF structural design. Herein, this work reports a hierarchical expansion strategy for making 16-connected building blocks to construct 3D COFs with sqc topology. The [16 + 2] construction achieved by condensation between a 16-connected carbazolyl dicyanobenzene-based building block (CzTPN) and linear diamino linkers (BD or Bpy) affords two 3D COFs (named CzBD COF and CzBpy COF). Furthermore, attributed to the well-organized donor-acceptor (D-A) heterojunction, the Ni chelated CzBpy COF (Ni@CzBpy COF) exhibits excellent performance for photoredox/Ni dual catalytic C(sp3)-C(sp2) cross-coupling of alkyltrifluoroborates with aryl halides, achieving a maximum 98% conversion and 94% yield for various substrates. This work developed the first case of high-connectivity COFs bearing 16-connected units, which is the highest connectivity reported until now, and achieved efficient photocatalysis applications, thus greatly enriching the possibilities of COFs.

Synthesis and Structure-Property Relationship of meso-Substituted Porphyrin- and Benzoporphyrin-Thiophene Conjugates toward Electrochemical Reduction of Carbon Dioxide

A novel series of ZnII-trans-A2B2 porphyrins and benzoporphyrins bearing phenyl and thiophene-based meso-substituents was successfully synthesized and characterized by spectroscopic and electrochemical techniques. Systematic comparison among the compounds in this series, together with the corresponding A4 analogs previously studied by our group, led to the understanding of the effects of π-conjugated system extension of a porphyrin core through β-fused rings, replacement of the phenyl with the thiophene-based meso-groups, and introduction of additional thiophene rings on thienyl substituents on photophysical and electrochemical properties. Oxidative electropolymerization through bithiophenyl units of both A4 and trans-A2B2 analogs was achieved, resulting in porphyrin- and benzoporphyrin-oligothiophene conjugated polymers, which were characterized by cyclic voltammetry and absorption spectrophotometry. Preliminary studies on catalytic performance toward electrochemical reduction of carbon dioxide (CO2) was described herein to demonstrate the potential of the selected compounds for serving as homogeneous and heterogeneous electrocatalysts for the conversion of CO2 to carbon monoxide (CO).

Halogen-functionalized covalent organic frameworks for photocatalytic Cr(VI) reduction under visible light

Covalent organic frameworks (COFs) are a type of novel organic catalysts which show great potential in the treatment of environmental contaminations. Herein, we synthesized three isoreticular halogen-functionalized (F, Cl and Br) porphyrin COFs for visible-light (420 nm ≤ λ ≤ 780 nm) photocatalytic reduction of Cr(VI) to Cr(III). Halogen substituents with tunable electronegativity can regulate the band structure and modulate the charge carrier kinetics of COFs. In the absence of any sacrificial reagent, the isoreticular COFs exhibited good photocatalytic reduction activity of Cr(VI). Particularly, the TAPP-2F showed nearly 100 % conversion efficiency and the highest reaction rate constants (k) on account of the strong electronegativity of F substituent. Experimental results and theoretical calculations showed that the conduction band (CB) potentials of COFs became more negative and charge carrier separation increased with the enhancement of electronegativity (Br < Cl < F), which could provide sufficient driving force for the photoreduction of Cr(VI) to Cr(III). The halogen substituents strategy for regulating the electronic structure of COFs can provide opportunities for designing efficient photocatalysts for environmental remediation. Meanwhile, the mechanistic insights reported in this study help to understand the photocatalytic degradation pathways of heavy metals.

Covalent organic frameworks in tribology - A perspective

Two-dimensional covalent organic frameworks (2D COFs) are an emerging class of crystalline porous materials formed through covalent bonds between organic building blocks. COFs uniquely combine a large surface area, an excellent stability, numerous abundant active sites, and tunable functionalities, thus making them highly attractive for numerous applications. Especially, their abundant active sites and weak interlayer interaction make these materials promising candidates for tribological research. Recently, notable attention has been paid to COFs as lubricant additives due to their excellent tribological performance. Our review aims at critically summarizing the state-of-art developments of 2D COFs in tribology. We discuss their structural and functional design principles, as well as synthetic strategies with a special focus on tribology. The generation of COF thin films is also assessed in detail, which can alleviate their most challenging drawbacks for this application. Subsequently, we analyze the existing state-of-the-art regarding the usage of COFs as lubricant additives, self-lubrication composite coatings, and solid lubricants at the nanoscale. Finally, critical challenges and future trends of 2D COFs in tribology are outlined to initiate and boost new research activities in this exciting field.

Unlocking the Charge-Storage Potential of a Phenanthraquinone-based Two-Dimensional Covalent Organic Framework (2D COF)

The high surface area, open pore-structure and atomic-level organization inherent in many covalent organic frameworks (COFs) make them an attractive polymer platform for developing functional materials. Herein, a chemically robust 2D COF (TpOMe-DAPQ COF) containing phenanthraquinone moieties was prepared by condensing 2,4,6-trimethoxy-1,3,5-benzenetricarbaldehyde (TpOMe) and 2,7-diamino-9,10-phenanthraquinone (DAPQ) using the convenient mechanochemical method. The poor charge-storage capacity of the pristine TpOMe-DAPQ COF was substantially improved by first investigating its redox-site accessibility (RSA) using different conductivity-enhancement methods, and then optimizing the amount of EDOT needed to perform an in-situ polymerization. The resulting composite (0.4EDOT@TpOMe-DAPQ) was characterized and its enhanced charge-storage capabilities enabled it to be used as an anode material in an aqueous Mn beaker-cell battery capable of delivering 0.76 V. This work outlines the rational design approach used to develop a functional charge-storage material utilizing a COF-based polymerization platform.

Construction of imine-hydrazone dual linkage covalent organic frameworks

The development of dual linkage covalent organic frameworks (DL-COFs) is fundamentally important for creating diversified structures and functions. Herein, imine-hydrazone DL-COFs were synthesized for the first time. Three novel imine-hydrazone DL-COFs have been constructed with bifunctional molecule 4-amino-2-methoxybenzohydrazide as the key building block via imine and hydrazone condensations simultaneously.

Halogen-Bonded Organic Frameworks (XOFs) Based on N⋅⋅⋅Br+⋅⋅⋅N Bonds: Robust Organic Networks Constructed by Fragile Bonds

Organic frameworks face a trade-off between the framework stability and the bond dynamics, which necessitates the development of innovative linkages that can generate stable frameworks without hindering efficient synthesis. Although iodine(I)-based halogen-bonded organic frameworks (XOFs) have been developed, constructing XOFs based on bromine(I) is desirable yet challenging due to the high sensitivity of bromine(I) species. In this work, we present the inaugural construction of stable bromine(I)-bridged two-dimensional (2D) halogen-bonded organic frameworks, XOF(Br)-TPy-BF4/OTf, based on sensitive [N⋅⋅⋅Br⋅⋅⋅N]+ halogen bonds. The formation of XOF(Br)-TPy-BF4/OTf was monitored by 1H NMR, XPS, IR, SEM, TEM, HR-TEM, SEAD. Their framework structures were established by the results from PXRD, theoretical simulations and SAXS. More importantly, XOF(Br) displayed excellent chemical and thermal stabilities. They exhibited stable two-dimensional framework structures in various organic solvents and aqueous media, even over a wide pH range (pH 3-12), while the corresponding model compounds BrPy2BF4/OTf decomposed quickly even in the presence of minimal water. Furthermore, the influence of the counterions were investigated by replacing BF4 with OTf, which improved the stability of XOF(Br). This characteristic enabled XOF(Br) to serve as an efficient oxidizing reagent in aqueous environments, in contrast with the sensitivity of BrPy2BF4/OTf, which performed well only in organic media. This study not only deepens our fundamental understanding of organic frameworks but also opens new avenues for the development and application of multifunctional XOFs.

Tunable Wettability of a Dual-Faced Covalent Organic Framework Membrane for Enhanced Water Filtration

Membrane technology plays a central role in advancing separation processes, particularly in water treatment. Covalent organic frameworks (COFs) have transformative potential in this field due to their adjustable structures and robustness. However, conventional COF membrane synthesis methods are often associated with challenges, such as time-consuming processes and limited control over surface properties. Our study demonstrates a rapid, microwave-assisted method to synthesize self-standing COF membranes within minutes. This approach allows control over the wettability of the surface and achieves superhydrophilic and near-hydrophobic properties. A thorough characterization of the membrane allows a detailed analysis of the membrane properties and the difference in wettability between its two faces. Microwave activation accelerates the self-assembly of the COF nanosheets, whereby the thickness of the membrane can be controlled by adjusting the time of the reaction. The superhydrophilic vapor side of the membrane results from -NH2 reactions with acetic acid, while the nearly hydrophobic dioxane side has terminal aldehyde groups. Leveraging the superhydrophilic face, water filtration at high water flux, complete oil removal, increased rejection with anionic dye size, and resistance to organic fouling were achieved. The TTA-DFP-COF membrane opens new avenues for research to address the urgent need for water purification, distinguished by its synthesis speed, simplicity, and superior separation capabilities.

Hydrogenation of CO2 into Value-added Chemicals Using Solid-Supported Catalysts

Reducing CO2 emissions is an urgent global priority. In this context, several mitigation strategies, including CO2 tax and stringent legislation, have been adopted to halt the deterioration of the natural environment. Also, carbon recycling procedures undoubtedly help reduce net emissions into the atmosphere, enhancing sustainability. Utilizing Earth's abundant CO2 to produce high-potential green chemicals and light fuels opens new avenues for the chemical industry. In this context, many attempts have been devoted to converting CO2 as a feedstock into various value-added chemicals, such as CH4, lower methanol, light olefins, gasoline, and higher hydrocarbons, for numerous applications involving various catalytic reactions. Although several CO2-conversion methods have been used, including electrochemical, photochemical, and biological approaches, the hydrogenation method allows the reaction to be tuned to produce the targeted compound without significantly altering infrastructure. This review discusses the numerous hydrogenation routes and their challenges, such as catalyst design, operation, and the combined art of structure-activity relationships for the various product formations.

Covalent-Organic Frameworks for Selective and Sensitive Detection of Antibiotics from Water

As the consumption of antibiotics rises, they have generated some negative impacts on organisms and the environment because they are often unable to be effectively degraded, and seeking effective detection methods is currently a challenge. Covalent-organic frameworks (COFs) are new types of crystalline porous crystals created based on the strong covalent interactions between blocked monomers, and COFs demonstrate great potential in the detection of antibiotics from aqueous solutions because of their large surface area, adjustable porosity, recyclability, and predictable structure. This review aims to present state-of-the-art insights into COFs (properties, classification, synthesis methods, and functionalization). The key mechanisms for the detection of antibiotics and the application performance of COFs in the detection of antibiotics from water are also discussed, followed by the challenges and opportunities for COFs in future research.

Dramatic Improvement of Homogeneous Carbon Dioxide and Bicarbonate Electroreduction Using a Tetracationic Water-Soluble Cobalt Phthalocyanine

Electrochemical conversion of carbon dioxide (CO2) offers the opportunity to transform a greenhouse gas into valuable starting materials, chemicals, or fuels. Since many CO2 capture strategies employ aqueous alkaline solutions, there is interest in catalyst systems that can act directly on such capture solutions. Herein, we demonstrate new catalyst designs where the electroactive molecules readily mediate the CO2-to-CO conversion in aqueous solutions between pH 4.5 and 10.5. Likewise, the production of CO directly from 2 M KHCO3 solutions (pH 8.2) is possible. The improved molecular architectures are based on cobalt(II) phthalocyanine and contain four cationic trimethylammonium groups that confer water solubility and contribute to the stabilization of activated intermediates via a concentrated positive charge density around the active core. Turnover frequencies larger than 103 s-1 are possible at catalyst concentrations of down to 250 nM in CO2-saturated solutions. The observed rates are substantially larger than the related cobalt phthalocyanine-containing catalysts. Density functional theory calculations support the idea that the excellent catalytic properties are attributed to the ability of the cationic groups to stabilize CO2-bound reduced intermediates in the catalytic cycle. The homogeneous, aqueous CO2 reduction that these molecules perform opens new frontiers for further development of the CoPc platform and sets a greatly improved baseline for CoPc-mediated CO2 upconversion. Ultimately, this discovery uncovers a strategy for the generation of platforms for practical CO2 reduction catalysts in alkaline solutions.

Enhancing structural control in covalent organic frameworks through steric interaction-driven linker design

Covalent Organic Frameworks (COFs) exhibiting kagome (kgm) structures are promising crystalline porous materials with two distinct pores. However, there are no reliable synthetic methods to exclusively target the kgm over the polymorphic square-lattice (sql) structure. To address this, we introduce a linker design strategy featuring bulky functional groups, which through steric interactions can hinder the sql net formation, thereby leading to a kgm structure. By rigid attachment of the methyl benzoate groups to a tetradentate COF linker, steric interactions with neighbouring linkers depending on the pore size become possible. The steric interaction was tuned by varying the complementary bidentate linear linker lengths, where the shorter phenylenediamine linker leads to steric hindrance and the formation of the kgm lattice, while with the longer benzidine linker, steric interaction is reduced leading to the sql lattice. Thus, control over the net can be exerted through steric interaction strengths. Additionally, structural analysis revealed the formation of the kgm COF with an unusual ABC stacking, leading to pearl string type pores instead of two distinct pore sizes. This COF system shows that steric interaction-driven design enhances control over COF structures, expanding the design toolbox, but also provides valuable insights into network formation and polymorphism.

Modulating the D-π-A Interactions in Metal-Covalent Organic Frameworks for Efficient Electroreduction of CO2 into Formate

Crystalline porous framework materials have attracted tremendous interest in electrocatalytic CO2 reduction owing to their ordered structures and high specific surface areas as well as rich designability, however, still suffer from a lack of accuracy in regulating the binding strength between the catalytic sites and intermediates, which is crucial for optimizing the electrocatalytic activity and expanding the product types. Herein, we report three new kinds of vinylene-linked metal-covalent organic frameworks (TMT-CH3-MCOF, TMP-CH3-MCOF and TMP-MCOF) with continuously tunable D-π-A interactions by adjusting the structure of the monomers at the molecular level for realizing efficient electroreduction of CO2 to formate for the first time. Interestingly, compared with TMT-CH3-MCOF and TMP-MCOF, the TMP-CH3-MCOF exhibited the highest HCOO- Faradaic efficiency (FEHCOO-) of 95.6 % at -1.0 V vs RHE and displayed the FEHCOO- above 90 % at the voltage range of -1.0 to -1.2 V vs. RHE, which is one of the highest among various kinds of reported electrocatalysts. Theoretical calculations further reveal that the catalytic sites in TMP-CH3-MCOF with unique moderate D-π-A interactions have suitable binding ability towards the reaction intermediate, which is beneficial for the formation of *HCOO and desorption of *HCOOH, thus effectively promoting the electroreduction of CO2 to formate.

Toward Durable CO2 Electroreduction with Cu-Based Catalysts via Understanding Their Deactivation Modes

The technology of CO2 electrochemical reduction (CO2ER) provides a means to convert CO2, a waste greenhouse gas, into value-added chemicals. Copper is the most studied element that is capable of catalyzing CO2ER to obtain multicarbon products, such as ethylene, ethanol, acetate, etc., at an appreciable rate. Under the operating condition of CO2ER, the catalytic performance of Cu decays because of several factors that alters the surface properties of Cu. In this review, these factors that cause the degradation of Cu-based CO2ER catalysts are categorized into generalized deactivation modes, that are applicable to all electrocatalytic systems. The fundamental principles of each deactivation mode and the associated effects of each on Cu-based catalysts are discussed in detail. Structure- and composition-activity relationship developed from recent in situ/operando characterization studies are presented as evidence of related deactivation modes in operation. With the aim to address these deactivation modes, catalyst design and reaction environment engineering rationales are suggested. Finally, perspectives and remarks built upon the recent advances in CO2ER are provided in attempts to improve the durability of CO2ER catalysts.

A robust Fe-based heterogeneous photocatalyst for the visible-light-mediated selective reduction of an impure CO2 stream

The transformation of CO2 into value-added products from an impure CO2 stream, such as flue gas or exhaust gas, directly contributes to the principle of carbon capture and utilization (CCU). Thus, we have developed a robust iron-based heterogeneous photocatalyst that can convert the exhaust gas from the car into CO with an exceptional production rate of 145 μmol g-1 h-1. We characterized this photocatalyst by PXRD, XPS, ssNMR, EXAFS, XANES, HR-TEM, and further provided mechanistic experiments, and multi-scale/level computational studies. We have reached a clear understanding of its properties and performance that indicates that this highly robust photocatalyst could be used to design an efficient visible-light-mediated reduction strategy for the transformation of impure CO2 streams into value-added products.

Nonidealities in CO2 Electroreduction Mechanisms Revealed by Automation-Assisted Kinetic Analysis

In electrocatalysis, mechanistic analysis of reaction rate data often relies on the linearization of relatively simple rate equations; this is the basis for typical Tafel and reactant order dependence analyses. However, for more complex reaction phenomena, such as surface coverage effects or mixed control, these common linearization strategies will yield incomplete or uninterpretable results. Cohesive kinetic analysis, which is often used in thermocatalysis and involves quantitative model fitting for data collected over a wide range of reaction conditions, requires more data but also provides a more robust strategy for interrogating reaction mechanisms. In this work, we report a robotic system that improves the experimental workflow for collecting electrochemical rate data by automating sequential testing of up to 10 electrochemical cells, where each cell can have a different electrode, electrolyte, gas-phase reactant composition, and applied voltage. We used this system to investigate the mechanism of carbon dioxide electroreduction to carbon monoxide at several immobilized metal tetrapyrroles. Specifically, at cobalt phthalocyanine (CoPc), cobalt tetraphenylporphyrin (CoTPP), and iron phthalocyanine (FePc), we see signatures of complex reaction mechanisms, where observed bicarbonate and CO2 order dependences change with applied potential. We illustrate how phenomena such as electrolyte poisoning and potential-dependent degrees of rate control can explain the observed kinetic behaviors. Our mechanistic analysis suggests that CoPc and CoTPP share a similar reaction mechanism, akin to one previously proposed, whereas the mechanism for FePc likely involves a species later in the catalytic cycle as the most abundant reactive intermediate. Our study illustrates that complex reaction mechanisms that are not amenable to common Tafel and order dependence analyses may be quite prevalent across this class of immobilized metal tetrapyrrole electrocatalysts.

Constructing Photocatalytic Covalent Organic Frameworks with Aliphatic Linkers

Photocatalytic covalent organic frameworks (COFs) are typically constructed with rigid aromatic linkers for crystallinity and extended π-conjugation. However, the essential hydrophobicity of the aromatic backbone can limit their performances in water-based photocatalytic reactions. Here, we for the first time report the synthesis of hydrophilic COFs with aliphatic linkers [tartaric acid dihydrazide (TAH) and butanedioic acid dihydrazide] that can function as efficient photocatalysts for H2O2 and H2 evolution. In these hydrophilic aliphatic linkers, the specific multiple hydrogen bonding networks not only enhance crystallization but also ensure an ideal compatibility of crystallinity, hydrophilicity, and light harvesting. The resulting aliphatic linker COFs adopt an unusual ABC stacking, giving rise to approximately 0.6 nm nanopores with an improved interaction with water guests. Remarkably, both aliphatic linker-based COFs show strong visible light absorption, along with a narrow optical band gap of ∼1.9 eV. The H2O2 evolution rate for TAH-COF reaches up to 6003 μmol h-1 g-1, in the absence of sacrificial agents, surpassing the performance of all previously reported COF-based photocatalysts. Theoretical calculations reveal that the TAH linker can enhance the indirect two-electron oxygen reduction reaction for H2O2 production by improving the O2 adsorption and stabilizing the *OOH intermediate. This study opens a new avenue for constructing semiconducting COFs using nonaromatic linkers.

Molecular Engineering of Hydrogen-Bonded Organic Framework for Enhanced Nitrate Electroreduction to Ammonia

Electrocatalytic nitrate reduction is an efficient way to produce ammonia sustainably. Herein, we rationally designed a copper metalloporphyrin-based hydrogen-bonded organic framework (HOF-Cu) through molecular engineering strategies for electrochemical nitrate reduction. As a result, the state-of-the-art HOF-Cu catalyst exhibits high NH3 Faradaic efficiency of 93.8%, and the NH3 production rate achieves a superior activity of 0.65 mmol h-1 cm-2. The in situ electrochemical spectroscopic combined with density functional theory calculations reveals that the dispersed Cu promotes the adsorption of NO3- and the mechanism is followed by deoxidation of NO3- to *NO and accompanied by deep hydrogenation. The generated *H participates in the deep hydrogenation of intermediate with fast kinetics as revealed by operando electrochemical impedance spectroscopy, and the competing hydrogen evolution reaction is suppressed. This research provides a promising approach to the conversion of nitrate to ammonia, maintaining the nitrogen balance in the atmosphere.

Porous organic crystals crosslinked by free-radical reactions

Two hydrogen-bonded crosslinked organic frameworks (HCOFs) were synthesized via free radical reactions utilizing butadiene and isoprene as crosslinkers. These HCOFs exhibit high crystallinity, enabling detailed structural characterization via single-crystal X-ray diffraction analysis. Subsequently, one of the olefin-rich HCOFs was converted to a hydroxylated framework through hydroboration-oxidation while maintaining the high crystallinity.

Critical Role of Cu Nanoparticle-Loaded Cu(100) Surface Structures on Structured Copper-Based Catalysts in Boosting Ethanol Generation in CO2 Electroreduction

Presently, realizing high ethanol selectivity in CO2 electroreduction remains challenging due to difficult C-C coupling and fierce product competition. In this work, we report an innovative approach for improving the efficiency of Cu-based electrocatalysts in ethanol generation from electrocatalytic CO2 reduction using a crystal plane modification strategy. These novel Cu-based electrocatalysts were fabricated by electrochemically activating three-dimensional (3D) flower-like CuO micro/nanostructures grown in situ on copper foils and modifying with surfactants. It was demonstrated that the fabricated Cu-based electrocatalyst featured a predominantly exposed Cu(100) surface loaded with high-density Cu nanoparticles (NPs). The optimal Cu-based electrocatalyst displayed considerably improved CO2 electroreduction performance, with a Faraday efficiency of 37.9% for ethanol and a maximum Faraday efficiency of 68.0% for C2+ products at -1.4 V vs RHE in an H-cell, accompanied by a high current density of 69.9 mA·cm-2, much better than the particulate Cu-based electrocatalyst. It was unveiled that the Cu(100)-rich surface of nanoscale petals with abundant under-coordinated copper atoms from CuNPs was conducive to the formation and stabilization of key *CH3CHO and *OC2H5 intermediates, thereby promoting ethanol generation. This study highlighted the critical role of CuNP-loaded Cu(100) surface structures on structured Cu-based electrocatalysts in enhancing ethanol production for the CO2 electroreduction process.

Electrochemical CO2 Reduction to Multicarbon Products on Non-Copper Based Catalysts

Electrochemical CO2 reduction reaction (eCO2RR) to value-added multicarbon (C2+) products offers a promising approach for achieving carbon neutrality and storing intermittent renewable energy. Copper (Cu)-based electrocatalysts generally play the predominant role in this process. Yet recently, more and more non-Cu materials have demonstrated the capability to convert CO2 into C2+, which provides impressive production efficiency even exceeding those on Cu, and a wider variety of C2+ compounds not achievable with Cu counterparts. This motivates us to organize the present review to make a timely and tutorial summary of recent progresses on developing non-Cu based catalysts for CO2-to-C2+. We begin by elucidating the reaction pathways for C2+ formation, with an emphasis on the unique C-C coupling mechanisms in non-Cu electrocatalysts. Subsequently, we summarize the typical C2+-involved non-Cu catalysts, including ds-, d- and p-block metals, as well as metal-free materials, presenting the state-of-the-art design strategies to enhance C2+ efficiency. The system upgrading to promote C2+ productivity on non-Cu electrodes covering microbial electrosynthesis, electrolyte engineering, regulation of operational conditions, and synergistic co-electrolysis, is highlighted as well. Our review concludes with an exploration of the challenges and future opportunities in this rapidly evolving field.

Combining Nickel- and Zinc-Porphyrin Sites via Covalent Organic Frameworks for Electrochemical CO2 Reduction

Covalent organic frameworks (COFs) are ideal platforms to spatially control the integration of multiple molecular motifs throughout a single nanoporous framework. Despite this design flexibility, COFs are typically synthesized using only two monomers. One bears the functional motif for the envisioned application, while the other is used as an inert connecting building block. Integrating more than one functional motif extends the functionality of COFs immensely, which is particularly useful for multistep reactions such as electrochemical reduction of CO2. In this systematic study, we synthesized five Ni(II)- and Zn(II)-porphyrin-based COFs, including two pure component COFs (Ni100 and Zn100) and three mixed Ni/Zn-COFs (Ni75/Zn25, Ni50/Zn50, and Ni25/Zn75). Among these, the Ni50/Zn50-COF exhibited the highest catalytic performance for the electroreduction of CO2 to CO and formate at -0.6 V vs RHE, as was observed in an H-cell. The catalytic performance of the COF catalysts was further extended to a zero-gap membrane electrode assembly (MEA) operation where, utilizing Ni50/Zn50, CH4 was detected along with CO and formate at a high current density of 150 mA cm-2. In contrast, under these conditions predominantly H2 and CO were detected at Ni100 and Zn100 respectively, indicating a clear synergistic effect between the Ni- and Zn-porphyrin units.

Directly-Fused Ni(II)Porphyrin Conjugated Polymers with Blocked meso-Positions: Impact on Electrocatalytic Properties

The oxidative coupling reaction of two Ni(II) porphyrins meso-substituted with three and four phenyl groups, Ni(II) 5,10,15-(triphenyl)porphyrin (NiPh3P) and Ni(II) 5,10,15,20-(tetraphenyl)porphyrin (NiPh4P) respectively, was investigated in a oxidative chemical vapor deposition (oCVD) process. Irrespective of the number of meso-substituents, high-resolution mass spectrometry evidences the formation of oligomeric species containing up to five porphyrin units. UV-Vis-NIR and XPS analyses of the oCVD films highlighted a strong dependence of the intermolecular coupling reaction with the substrate temperature. Specifically, higher substrate temperatures yield lowering of valence band maxima and reduction of the band gap. The formation of conjugated polymeric assemblies results in increased conductivities as compared to their sublimed counterparts. Yet, electrocatalytic measurements exhibit water oxidation onset overpotentials (308 mV for pNiPh3P and 343 mV for pNiPh4P) comparatively higher than the onset overpotential measured for the oCVD film from Ni(II) 5,15-(diphenyl)porphyrin (pNiPh2P), i. e. 283 mV. Although DFT and comparative oCVD studies suggest the formation of directly fused porphyrins involving 'phenyl-mediated' and β-β linkages when reacting tetra-meso-substituted porphyrins, the present findings highlight that multiple direct fusion (β-β/meso-meso/β-β or meso-β/β-meso) is essential for Ni(II) porphyrin-based conjugated polymers to enable a dinuclear radical oxo-coupling operating mechanism for water oxidation at low overpotential and durable catalytic activity.

Tuning the Pyridine Units in Vinylene-Linked Covalent Organic Frameworks Boosting 2e- Oxygen Reduction Reaction

The N-doped carbon materials are supposed to be the efficient oxygen reduction reaction (ORR) catalysts with the undefined N-doped carbon ring groups. It is essential to well define the role of the nitrogen atoms of these carbon structures in active behavior. Even though, the covalent organic frameworks (COFs) with precise structures are well developed, but unable to exclude the polar linkages influence. This study presents a series of pyridine-containing COFs linked via nonpolar carbon-carbon double bonds (C = C). Their catalytic activity and selectivity for 2e- ORR are successfully modulated by locating the embedded pyridine nitrogen in the backbones through the linking modes of pyridine moieties within the frameworks. Such phenomena can be attributed to their different binding abilities toward O2, leading to the different binding strength of the intermediate OH* to the catalytic sites, also verified by the theoretical calculation. This work provides us a new insight to design high-efficiency ORR catalysts through the exact location of pyridine nitrogen.

COF-based membranes for liquid phase separation: Preparation, mechanism and perspective

Covalent organic frameworks (COFs) are a new kind of crystalline porous materials composed of organic molecules connected by covalent bonds, processes the characteristics of low density, large specific surface area, adjustable pore size and structure, and easy to functionalize, which have been widely used in the field of membrane separation technology. Recently, there are more and more researches focusing on the preparation methods, separation application, and mechanism of COF membranes, which need to be further summarized and compared. In this review, we primarily summarized several conventional preparation methods, such as two-phase interfacial polymerization, in-situ growth on substrate, unidirectional diffusion method, layer-by-layer assembly method, mixed matrix membranes, and so on. The advantages and disadvantages of each method are briefly summarized. The application potential of COF membrane in liquid separation are introduced from four aspects: dyeing wastewater treatment, heavy metal removal, seawater desalination and oil-water separation. Then, the mechanisms including pore structure, hydrophilic/hydrophobic, electrostatic repulsion/attraction and Donnan effect are introduced. For the efficient removal of different kind of pollutions, researchers can select different ligands to construct membranes with specific pore size, hydrophily, salt or organic rejection ability and functional group. The ideas for the design and preparation of COF membranes are introduced. Finally, the future direction and challenges of the next generation of COF membranes in the field of separation are prospected.

Constructing 2D Phthalocyanine Covalent Organic Framework with Enhanced Stability and Conductivity via Interlayer Hydrogen Bonding as Electrocatalyst for CO2 Reduction

Fabricating COFs-based electrocatalysts with high stability and conductivity still remains a great challenge. Herein, 2D polyimide-linked phthalocyanine COF (denoted as NiPc-OH-COF) is constructed via solvothermal reaction between tetraanhydrides of 2,3,9,10,16,17,23,24-octacarboxyphthalocyaninato nickel(II) and 2,5-diamino-1,4-benzenediol (DB) with other two analogous 2D COFs (denoted as NiPc-OMe-COF and NiPc-H-COF) synthesized for reference. In comparison with NiPc-OMe-COF and NiPc-H-COF, NiPc-OH-COF exhibits enhanced stability, particularly in strong NaOH solvent and high conductivity of 1.5 × 10-3 S m-1 due to the incorporation of additional strong interlayer hydrogen bonding interaction between the O-H of DB and the hydroxy "O" atom of DB in adjacent layers. This in turn endows the NiPc-OH-COF electrode with ultrahigh CO2-to-CO faradaic efficiency (almost 100%) in a wide potential range from -0.7 to -1.1 V versus reversible hydrogen electrode (RHE), a large partial CO current density of -39.2 mA cm-2 at -1.1 V versus RHE, and high turnover number as well as turnover frequency, amounting to 45 000 and 0.76 S-1 at -0.80 V versus RHE during 12 h lasting measurement.

Covalent organic frameworks-based materials for antibiotics fluorescence detection

Antibiotics play a vital role in safeguarding people's health since most bacterial infection can be efficiently controlled and cured by treating with suitable antibiotics. However, excessive use of antibiotics in husbandry and aquaculture leaded to the pollution of eco-environment. Thus, it is important to develop simple facile methods and effective functional materials for quick on-site analysis of antibiotics. Covalent organic frameworks (COFs), as a kind of porous crystalline covalent bond linked polymers, have demonstrated its power in multiple fields. Herein, we will discuss COFs-based materials utilized as antibiotics sensors with fluorescence method. For each sensor, we will mainly discuss the mechanism for antibiotics recognition, the preparation, characterization and fluorescence sensing performance of specific antibiotics. The mechanism to illustrate the interaction between sensors and antibiotics analytes would also be stressed.

Molecular recognition with resolution below 0.2 angstroms through thermoregulatory oscillations in covalent organic frameworks

Crystalline materials with uniform molecular-sized pores are desirable for a broad range of applications, such as sensors, catalysis, and separations. However, it is challenging to tune the pore size of a single material continuously and to reversibly distinguish small molecules (below 4 angstroms). We synthesized a series of ionic covalent organic frameworks using a tetraphenoxyborate linkage that maintains meticulous synergy between structural rigidity and local flexibility to achieve continuous and reversible (100 thermal cycles) tunability of "dynamic pores" between 2.9 and 4.0 angstroms, with resolution below 0.2 angstroms. This results from temperature-regulated, gradual amplitude change of high-frequency linker oscillations. These thermoelastic apertures selectively block larger molecules over marginally smaller ones, demonstrating size-based molecular recognition and the potential for separating challenging gas mixtures such as oxygen/nitrogen and nitrogen/methane.

Porphyrin-based porous organic polymers synthesized using the Alder-Longo method: the most traditional synthetic strategy with exceptional capacity

Porphyrin is a typical tetrapyrrole chromophore-based pigment with a special electronic structure and functionalities, which is frequently introduced into various porous organic polymers (POPs). Porphyrin-based POPs are widely used in various fields ranging from environmental and energy to biomedicine-related fields. Currently, most porphyrin-based POPs are prepared via the copolymerization of specific-group-functionalized porphyrins with other building blocks, in which the tedious and inefficient synthesis procedure for the porphyrin greatly hinders the development of such materials. This review aimed to summarize information on porphyrin-based POPs synthesized using the Alder-Longo method, thereby skipping the complex synthesis of porphyrin-bearing monomers, in which the porphyrin macrocycles are formed directly via the cyclic tetramerization of pyrrole with monomers containing multiple aldehyde groups during the polymerization process. The representative applications of porphyrin-based POPs derived using the Alder-Longo method are finally introduced, which pinpoints a clear relationship between the structure and function from the aspect of the building blocks used and porous structures. This review is therefore valuable for the rational design of efficient porphyrin-based porous organic polymer systems that may be utilized in various fields from energy-related conversion/storage technologies to biomedical science.

New Advances in Covalent Network Polymers via Dynamic Covalent Chemistry

Covalent network polymers, as materials composed of atoms interconnected by covalent bonds in a continuous network, are known for their thermal and chemical stability. Over the past two decades, these materials have undergone significant transformations, gaining properties such as malleability, environmental responsiveness, recyclability, crystallinity, and customizable porosity, enabled by the development and integration of dynamic covalent chemistry (DCvC). In this review, we explore the innovative realm of covalent network polymers by focusing on the recent advances achieved through the application of DCvC. We start by examining the history and fundamental principles of DCvC, detailing its inception and core concepts and noting its key role in reversible covalent bond formation. Then the reprocessability of covalent network polymers enabled by DCvC is thoroughly discussed, starting from the significant milestones that marked the evolution of these polymers and progressing to their current trends and applications. The influence of DCvC on the crystallinity of covalent network polymers is then reviewed, covering their bond diversity, synthesis techniques, and functionalities. In the concluding section, we address the current challenges faced in the field of covalent network polymers and speculates on potential future directions.

Solar Carboxylation Using CO2: Interfacially Synthesized Flexible Covalent Organic Frameworks Film as a Photocatalyst for Highly Selective Solar Carboxylation of Arylamines with CO2

Carbon dioxide (CO2) conversion into value-added chemicals/fuels by utilizing solar energy is a sustainable way to mitigate our dependence on fossil fuels and stimulate a carbon-neutral economy. However, the efficient and affordable conversion of CO2 is still an ongoing challenge. Here, we report an interfacially synthesized visible-light-active Ni(II)-integrated covalent organic frameworks (TaTpBpy-Ni COFs) film as a photocatalyst for efficient CO2 conversion into carboxylic acid under ambient conditions. Notably, the TaTpBpy-Ni COFs film showed excellent photocatalytic activity for the carboxylation of various arylamines with CO2 to the corresponding arylcarboxylic acid via C-N bond activation under solar-light irradiation. Moreover, this carboxylation protocol exhibits mild reaction conditions and good functional group tolerance without the necessity of using stoichiometric metallic reductants. This work shows a benchmark example of not only the interfacially synthesized COFs film used as a photocatalyst for solar-light energy utilization but also the selective solar chemical production system of arylcarboxylic acid directly from CO2.