Design and control of gas diffusion process in a nanoporous soft crystal

Carbazole and Triazine-Based D-A Covalent Organic Framework for Visible Light-Mediated Photocatalytic C-H Activation of Imidazopyridine and Indole

Two-dimensional donor-acceptor covalent organic frameworks (COFs) show considerable promise for metal-free and heterogeneous photocatalysis due to their efficient charge carrier separation and exciton transport upon photoexcitation. To date, numerous photocatalysts have been developed. However, they encounter several challenges, such as inadequate sunlight harvesting ability, poor photostability, and nonreusability. Fortunately, the emergence of COFs presents a promising solution to these problems. Herein, we report an imine-linked CzTA-TAPT COF featuring carbazole as the electron donor and triazine as the electron acceptor. Compared to the previously reported C2-linker-derived CzDA-TAPT COF, this C3-linked COF exhibits good charge separation and charge carrier transport. As a consequence, it demonstrates excellent photocatalytic applicability in the C-3 thiocyanation of imidazo[1,2-a]pyridine and indole under ambient conditions under visible light. Moreover, its broad substrate compatibility and high recyclability provide a green and sustainable approach for the thiocyanation of imidazopyridine and indole. To the best of our knowledge, this is the first heterogeneous catalyst demonstrated for the thiocyanation of imidazo[1,2-a]pyridine. These findings will inspire further research in the development of high-performance D-A COFs as photocatalysts for organic transformations.

Solution Processable Metal-Organic Frameworks: Synthesis Strategy and Applications

Metal-organic frameworks (MOFs), constructed by inorganic secondary building units with organic linkers via reticular chemistry, inherently suffer from poor solution processability due to their insoluble nature, resulting from their extensive crystalline networks and structural rigidity. The ubiquitous occurrence of precipitation and agglomeration of MOFs upon formation poses a significant obstacle to the scale-up production of MOF-based monolith, aerogels, membranes, and electronic devices, thus restricting their practical applications in various scenarios. To address the previously mentioned challenge, significant strides have been achieved over the past decade in the development of various strategies aimed at preparing solution-processable MOF systems. In this review, the latest advance in the synthetic strategies for the construction of solution-processable MOFs, including direct dispersion in ionic liquids, surface modification, controllable calcination, and bottom-up synthesis, is comprehensively summarized. The respective advantages and disadvantages of each method are discussed. Additionally, the intriguing applications of solution-processable MOF systems in the fields of liquid adsorbent, molecular capture, sensing, and separation are systematically discussed. Finally, the challenges and opportunities about the continued advancement of solution-processable MOFs and their potential applications are outlooked.

Controlling Guest Diffusion by Local Dynamic Motion in Soft Porous Crystals to Separate Water Isotopologues and Similar Gases

ConspectusThe precise and effective separation of similar mixtures is one of the fundamental issues and essential tasks in chemical research. In the field of gas/vapor separation, the size difference among the molecular pairs/isomers of light hydrocarbons and aromatic compounds is generally 0.3-0.5 Å, and the boiling-point difference is generally 6-15 K. These are necessary industrial raw materials and have great separation demands. Still, their separation mainly relies on energy-intensive distillation technology. On the other hand, remarkably similar substances such as oxygen/argon and isotopologues usually exhibit size differences of only 0-0.07 Å and boiling-point differences of only 1-3 K. Although their industrial separation can be realized, their efficiency is considerably low. Therefore, effectively separating remarkably similar mixtures is crucial in fundamental chemistry and industry, but it remains a significant challenge. Porous coordination polymers (PCPs) or metal-organic frameworks (MOFs) are emerging materials platforms for designing adsorbents for separating similar mixtures. However, the reported PCPs did not work well for separating remarkably similar substances. The framework structures of the mainstream PCPs remain unchanged (rigid) or significantly change (globally flexible) upon adsorption. However, rigid and globally flexible PCPs find controlling the pore aperture in subangstrom precision challenging, a prerequisite for distinguishing remarkably similar substances. Thus, novel mechanisms and materials design principles are urgently needed to realize PCPs-based adsorptive separation of remarkably similar mixtures.To confront the obstacles in separating remarkably similar mixtures, our group started contributing to this field in 2017. We employed locally flexible PCPs as the materials designing platform, whose local motions of the side substituent groups potentially regulate the pore apertures to design and control the gas/vapor diffusion in PCPs. Specifically, we encoded dynamic flipping molecular motions into the diffusion-regulatory gate functionality. The ligands were designed by integrating carboxylic coordination groups with nonplanar fused-ring moieties, with the latter moieties exhibiting flipping motion around their equilibrium positions with small energy increases. Such local motions of ligands lead to the dynamic opening and blocking of PCP channels, thus termed flipping dynamic crystals (FDCs). FDCs feature distinctive temperature-responsive adsorption behaviors due to the competition of thermodynamics and kinetics under diffusion regulation, enabling differentiation of remarkably similar mixtures by each gate-admission temperature much higher than the boiling-point temperature of each component. Even when the molecular sizes are the same in the water isotopologue mixtures, FDCs can separate each isotopologue by amplifying their diffusion-rate differences. Finally, by combining the thermodynamic and kinetic factors, FDCs achieve temperature-switched recognition of CO2/C2H2 and diffusion-rate sieving of C3H6/C3H8. Therefore, our work provides a platform for designing locally flexible PCPs by introducing subangstrom precision in flexibility. This opens up the feasibility of separating remarkably similar mixtures on scientific principles. In this Account, we summarize our above ongoing research contributions, including (i) the design of flipping ligands and FDCs, (ii) the characterization of flipping motions, (iii) the gas/isotopologue sorption behaviors, and (iv) the separation of gases and isotopologues. Overall, our studies offer a new aspect of soft porous crystals and provide future opportunities for relevant researchers in this field.

Revving Up a Designed Copper Catecholate Porous Organic Polymer for Its Potent Ethylene Adsorption than Ethane

The potential to produce high-purity C2H4 has made ethylene-selective adsorbents for ethane (C2H6)/ethylene (C2H4) gas mixture separation appealing as viable substitutes for traditional cryogenic distillation. In this aspect, porous organic polymers (POPs) are anticipated to become the next-generation potential adsorbent due to their easily customizable functions and functional sites suitable for gas separation. This article reports the selective C2H4 adsorption over C2H6 using microporous copper(I)-coordinated POP (Cu@Di-POP) via fine-tuning of the π complexation and pore size. The specially designed adsorbent has the ideal pore size and coordinated Cu(I) ions to form π-complexation with C2H4 molecules, which enabled it to adsorb C2H4 (at 1 bar, 24.9, 18.9, and 13.4 cm3 g-1 at 273, 298, and 323 K, respectively) while significantly reducing C2H6 adsorption (at 1 bar, 16.9, 12.7, and 8.8 cm3 g-1 at 273, 298, and 323 K, respectively). At 1 bar, Cu@Di-POP exhibited IAST selectivities of 6.09, 5.60, and 4.13 for C2H4/C2H6 at 273, 298, and 323 K, respectively, suggesting its C2H4 selective behavior, which was further confirmed from the experimental breakthrough measurement. Furthermore, the computational studies carried out with density functional theory highlighted an enhanced charge distribution leading to dπ-pπ conjugation between C2H4 π-electrons and Cu d-electrons, thereby showing a relatively higher interaction energy of -37.23 kcal/mol with C2H4 as compared to -16.06 kcal/mol with C2H6 gas molecules.

In Situ Stimulus Response Study on the Acetylene/Ethylene Purification Process in MOFs

Efficient removal of acetylene (C2H2) impurities from polymer-grade ethylene (C2H4) in a simple, clean manner remains a challenging goal in industry. The use of porous materials such as metal-organic frameworks (MOFs) is promising for this aim but the acquisition of high purification performance is still hindered by few knowledge on the purification process because the previous conclusions were derived basically from the non-breakthrough tests or ignored the influence of structural difference (crystal structure, morphology, or defect). Here we propose an unprecedented in situ stimulus response strategy to minimize the influence of structural difference, obtain the gas-loading crystal structures of the same MOF before and after light or heat stimulation, directly observe the evolution of pore charge distribution and pore⋅⋅⋅gas interactions under light/heat induction, and finally summarizes the favorable structure for highly efficient purification of C2H4. This study opens a new route to understand the relationship between the structure and separation performance for porous materials.

Quantum-accurate machine learning potentials for metal-organic frameworks using temperature driven active learning

Understanding structural flexibility of metal-organic frameworks (MOFs) via molecular dynamics simulations is crucial to design better MOFs. Density functional theory (DFT) and quantum-chemistry methods provide highly accurate molecular dynamics, but the computational overheads limit their use in long time-dependent simulations. In contrast, classical force fields struggle with the description of coordination bonds. Here we develop a DFT-accurate machine-learning spectral neighbor analysis potentials for two representative MOFs. Their structural and vibrational properties are then studied and tightly compared with available experimental data. Most importantly, we demonstrate an active-learning algorithm, based on mapping the relevant internal coordinates, which drastically reduces the number of training data to be computed at the DFT level. Thus, the workflow presented here appears as an efficient strategy for the study of flexible MOFs with DFT accuracy, but at a fraction of the DFT computational cost.

π-Conjugated Porous Polymer Nanosheets for Explosive Sensing: Investigation on the Role of H-Bonding

Nitroaromatic explosive sensing plays a critical role in ensuring public security and environmental protection. Herein, we report 2-pyridyl-thiazolothiazole (pyTTz) integrated blue-fluorescent π-conjugated porous polymer nanosheets, NTzCMP and TzCMP for selective sensing of picric acid (PA) among nitrophenol explosives. Acid-base interactions between PA and pyTTz of CMP lead to H-bonding interactions, where the hydroxy group of PA engaged in weak H-bonding interactions with pyridine and TTz of pyTTz moiety. This led to a strong fluorescence quenching of CMPs-such formation of ground state complex was supported by linear Stern-Volmer quenching plots, unaltered excited state lifetimes, and detailed FTIR analysis of PA exposed CMPs. Interestingly, both CMPs exhibited an excellent response to smaller analytes such as o-nitrotoluene compared to 2,4-dinitrotoluene. Both NTzCMP and TzCMP CMPs exhibited high KSV values of 9×103 and 2.1×103 M-1 for PA and the corresponding limit of detection values were found to be 0.46 and 1.6 ppm, respectively.

Regulating Water Adsorption Sites of Keto-Enamine COF by Base Exfoliation and Deprotonation for Enhanced Humidity Response

Covalent organic framework (COF) has received much attention owing to its unique framework structure formed by diverse organic units. However, challenges, including low conductivity, structure instability, and limited control of adsorption and desorption processes, stimulate the modification of COF in electronic sensors. Herein, inspired by the alterable structure of COF in different solvents, a facile base exfoliation and deprotonation method is proposed to regulate the water adsorption sites and improve the intrinsic conductivity of TpPa-1 COF. TpPa-1 COF powders are exfoliated to nanosheets to increase water adsorption, while the deprotonation is utilized to adjust the affinity of water molecules on TpPa-1 COF framework, contributing to water accumulation in the 1D pores. The as-fabricated TpPa-1 COF sensor exhibits a decreased recovery time from 419 to 49 s, forming a linear relation between relative humidity (RH) value and humidity response. The excellent chemical stability of the covalent bond of TpPa-1 COF contributes to the excellent stable device performance in 30 days, promoting further integration and data analysis in respiration monitoring.

Facile and scale-up syntheses of high-performance enzyme@meso-HOF biocatalysts

Facile immobilization is essential for the wide application of enzymes in large-scale catalytic processes. However, exploration of suitable enzyme supports poses an unmet challenge, particularly in the context of scale-up biocatalyst fabrication. In this study, we present facile and scale-up syntheses of high-performance enzyme biocatalysts via in situ encapsulation of cytochrome c (Cyt-c) as mono-enzyme and glucose oxidase (GOx)-horseradish peroxidase (HRP) as dual-enzyme cascade (GOx&HRP) systems, respectively, into a stable mesoporous hydrogen-bonded organic framework (meso-HOF) matrix. In situ encapsulation reactions occur under ambient conditions, and facilitate scale up (∼3 g per reaction) of enzyme@meso-HOF within a very short period (5-10 min). The resultant biocatalysts not only exhibit high enzyme loading (37.9 wt% for mono-enzyme and 22.8 wt% for dual-enzyme) with minimal leaching, but also demonstrate high catalytic activity, superior reusability, and durability. This study represents an example of scale-up fabrication of enzyme@meso-HOF biocatalysts on the gram level and highlights superior meso-HOFs as suitable host matrices for biomolecular entities.

Cross-Linking CdSO4-Type Nets with Hexafluorosilicate Anions to Form an Ultramicroporous Material for Efficient C2H2/CO2 and C2H2/C2H4 Separation

A 44.610.8 topology hybrid ultramicroporous material (HUM), {[Cu1.5F(SiF6)(L)2.5]·G}n, (L = 4,4'-bisimidazolylbiphenyl, G = guest molecules), 1, formed by cross-linking interpenetrated 3D four-connected CdSO4-type nets with hexafluorosilicate anions is synthesized and evaluated in the context of gas sorption and separation herein. 1 is the first HUM functionalized with two different types of fluorinated sites (SiF6 2- and F- anions) lining along the pore surface. The optimal pore size (≈5 Å) combining mixed and high-density electronegative fluorinated sites enable 1 to preferentially adsorb C2H2 over CO2 and C2H4 by hydrogen bonding interactions with a high C2H2 isosteric heat of adsorption (Qst) of ≈42.3 kJ mol-1 at zero loading. The pronounced discriminatory sorption behaviors lead to excellent separation performance for C2H2/CO2 and C2H2/C2H4 that surpasses many well-known sorbents. Dynamic breakthrough experiments are conducted to confirm the practical separation capability of 1, which reveal an impressive separation factor of 6.1 for equimolar C2H2/CO2 mixture. Furthermore, molecular simulation and density functional theory (DFT) calculations validate the strong binding of C2H2 stems from the chelating fix of C2H2 between SiF6 2- anion and coordinated F- anion.

Mussel-inspired interface deposition strategy for mesoporous metal-phenolic nanospheres with superior antioxidative, photothermal and antibacterial performance

Metal-phenolic networks (MPNs) have emerged as a versatile and multifunctional platform applied in bioimaging, disease treatment, electrocatalysis, and water purification. The synthesis of MPNs with mesoporous frameworks and ultra-small diameters (<200 nm), crucial for post-modification, cargo loading, and mass transport, remains a formidable challenge. Inspired by mussel chemistry, mesoporous metal-phenolic nanospheres (MMPNs) are facilely prepared by direct deposition of the metal-polyphenol complex on the interface of oil nano-droplets composed of block copolymers/1,3,5-trimethylbenzene followed by a spontaneous template-removal process. Due to the penetrable and stable networks, the oil nano-droplets gradually leak from the networks driven by shear stress during the stirring process. As a result, MMPNs are obtained without additional template removal procedures such as solvent extraction or high-temperature calcination. The materials have a large pore size (∼12.1 nm), uniform spherical morphology with a small particle size (∼99 nm), and a large specific surface area (49.8 m2 g-1). Due to the abundant phenolic hydroxyl groups, the MMPNs show excellent antioxidative property. The MMPNs also have excellent photothermal property, whose photothermal conversion efficiency was 40.9 %. Moreover, the phenolic hydroxyl groups can reduce Ag+ in situ to prepare Ag nanoparticles loaded MMPNs composites, which have excellent inhibition performance of drug-resistant bacteria biofilm.

Sustainable production and applications of metal-organic frameworks

Metal-organic frameworks (MOFs) have become a hot spot in the area of functional materials and have undergone rapid development in a wide range of fields in the 21st century. However, the scalable application of MOFs is still constrained by high production cost at the front end. Additionally, systematic discussion of the reuse of spent MOFs is lacking. Encouragingly, an increasing number of studies have been focusing on the low-cost production and recycling of MOF-based materials, providing feasible solutions for resource recovery and reduction. To stimulate future enthusiasm and interest in realizing the blue economy of MOFs, ranging from front-end production to terminal disposal, we have presented and summarized the state-of-the-art progress in the sustainable synthesis, separation, and reuse of MOFs. Based on the existing challenges, we also propose fit-for-purpose future directions in the MOF field to move toward blue economy.

Rapid Construction of Double Crystalline Prussian Blue Analogue Hetero-Superstructure

The controllable construction of complex metal-organic coordination polymers (CPs) merits untold scientific and technological potential, yet remains a grand challenge of one-step construction and modulating simultaneously valence states of metals and topological morphology. Here, a thiocyanuric acid (TCA)-triggered strategy is presented to one-step rapid synthesis a double-crystalline Prussian blue analogue hetero-superstructure (PBA-hs) that comprises a Co3[Fe(CN)6]2 cube overcoated with a KCo[Fe(CN)6] shell, followed by eight self-assembled small cubes on vertices. Unlike common directing surfactants, TCA not only acts as a trigger for the fast growth of KCo[Fe(CN)6] on the Co3[Fe(CN)6]2 phase resulting in a PBA-on-PBA hetero-superstructure, but also serves as a flange-like bridge between them. By combining experiments with simulations, a deprotonation-induced electron transfer (DIET) mechanism is proposed for formation of second phase in PBA-hs, differing from thermally and photo-induced electron transfer processes. To prove utility, the calcined PBA-hs exhibits enhanced oxygen evolution reaction performance. This work provides a new method to design of novel CPs for enriching chemistry and material science. This work offers a practical approach to design novel CPs for enriching chemistry and material science.

Room-Temperature Synthesis of Covalent Organic Frameworks using Gamma-Irradiation in Open-Air Conditions

Covalent organic frameworks (COFs), which have layered stacking structures, extended π-conjugation, and periodic frameworks have become a promising class of materials for a wide range of applications. However, their synthetic pathways frequently need high temperatures, enclosed systems under high pressures, an inert atmosphere, and extended reaction time, which restrict their practicality in real-world applications. Herein, the use of gamma irradiation is presented to synthesize highly crystalline COFs at room temperature under an open-air condition within a short time. This is demonstrated that there is no significant difference in crystallinity of COFs by gamma irradiation under air, N2 or Ar atmosphere conditions. Moreover, this approach can successfully fabricate COFs in the vessel with different degrees of transparency or even in a plastic container. Importantly, this strategy is applicable not only to imine linkage of COFs but also effective to the imide linkages of COFs. Most importantly, these COFs demonstrate improved crystallinity, surface area, and thermal stability in comparison to the corresponding materials synthesized via the solvothermal method. Finally, a COF synthesized through gamma irradiation exhibits remarkable photocatalytic activity in promoting the sacrificial hydrogen evolution from water, displaying a more catalytic efficiency compared with that of its solvothermal analogue.

Recovery of High-Purity SF6 from Humid SF6/N2 Mixture within a Co(II)-Pyrazolate Framework

Sulfur hexafluoride (SF6) is extensively employed in the power industry. However, its emissions significantly contribute to the greenhouse effect. The direct recovery of high purity SF6 from industrial waste gases would benefit its sustainable use, yet this represents a considerable challenge. Herein, we report the enrichment of SF6 from SF6/N2 mixtures via adsorptive separation in a stable Co(II)-pyrazolate MOF BUT-53 (BUT: Beijing University of Technology), which features dynamic molecular traps. BUT-53 exhibits an excellent SF6 adsorption uptake of 2.82 mmol/g at 0.1 bar and 298 K, as well as an unprecedented SF6/N2 (10:90) selectivity of 2485. Besides, the remarkable SF6/N2 selectivity of BUT-53 enables recovery of high purity (>99.9%) SF6 from a low concentration (10%) mixture through a breakthrough experiment. The excellent SF6/N2 separation efficiency was also well maintained under humid conditions (RH = 90%) over multiple cycles. Molecular simulation, single-crystal diffraction, and adsorption kinetics studies elucidate the associated adsorption mechanism and water tolerance.

Ideal Cage-like Pores for Molecular Sieving of Butane Isomers with High Purity and Record Productivity

n-C4H10 and iso-C4H10 are both important petrochemical raw materials. Considering the coexistence of the isomers in the production process, it is necessary to achieve their efficient separation through an economical way. However, to obtain high-purity n-C4H10 and iso-C4H10 in one-step separation process, developing iso-C4H10-exclusion adsorbents with high n-C4H10 adsorption capacity is crucial. Herein, we report a cage-like MOF (SIFSIX-Cu-TPA) with small windows and large cavities which can selectively allow smaller n-C4H10 enter the pore and accommodate a large amount of n-C4H10 simultaneously. Adsorption isotherms reveal that SIFSIX-Cu-TPA not only completely excludes iso-C4H10 in a wide temperature range, but also exhibits a very high n-C4H10 adsorption capacity of 94.2 cm3 g-1 at 100 kPa and 298 K, which is the highest value among iso-C4H10-exclusion-type adsorbents. Breakthrough experiments show that SIFSIX-Cu-TPA has excellent n/iso-C4H10 separation performance and can achieve a record-high productivity of iso-C4H10 (3.2 mol kg-1) with high purity (>99.95 %) as well as 3.0 mol kg-1 of n-C4H10 (>99 %) in one separation circle. More importantly, SIFSIX-Cu-TPA can realize the efficient separation of butanes at different flow rates, temperatures, as well as under high humid condition, which indicates that SIFSIX-Cu-TPA can be deemed as an ideal platform for industrial butane isomers separation.

Dehydration-Induced Cluster Consolidation in a Metal-Organic Framework for Sieving Hexane Isomers

Metal-organic frameworks (MOFs) that exhibit dynamic phase-transition behavior under external stimuli could have great potential in adsorptive separations. Here we report on a zinc-based microporous MOF (JNU-80) and its reversible transformation between two crystalline phases: large pore (JNU-80-LP) and narrow pore (JNU-80-NP). Specifically, JNU-80-LP can undergo a dehydration-induced cluster consolidation under heat treatment, resulting in JNU-80-NP with a reduced channel that allows exclusion of di-branched hexane isomers while high adsorption of linear and mono-branched hexane isomers. We further demonstrate the fabrication of MOF-polymer composite (JNU-80-NP-block) and its application in the purification of di-branched isomers from liquid-phase hexane mixtures (98 % di-branched) at room temperature, affording the di-branched hexane isomers with 99.5 % purity and close to 90 % recovery rate over ten cycles. This work illustrates an interesting dehydration-induced cluster consolidation in MOF structure and the ensuing channel shrinkage for sieving di-branched hexane isomers, which may have important implications for the development of MOFs with dynamic behavior and their potential applications in non-thermal driven separation technologies.

Tunable Gas Admission via a "Molecular Trapdoor" Mechanism in a Flexible Cationic Metal-Organic Framework Featuring 1D Channels

Achieving high gas selectivity is challenging when dealing with gas pairs of similar size and physiochemical properties. The "molecular trapdoor" mechanism discovered in zeolites holds promise for highly selective gas adsorption separation but faces limitations like constrained pore volume and slow adsorption kinetics. To address these challenges, for the first time, a flexible metal-organic framework (MOF) featuring 1D channels and functioning as a "molecular trapdoor" material is intoduced. Extra-framework anions act as "gate-keeping" groups at the narrowest points of channels, permitting gas admissions via gate opening induced by thermal/pressure stimuli and guest interactions. Different guest molecules induce varied energy barriers for anion movement, enabling gas separation based on distinct threshold temperatures for gas admission. The flexible framework of Pytpy MOFs, featuring swelling structure with rotatable pyridine rings, facilitates faster gas adsorption than zeolite. Analyzing anion properties of Pytpy MOFs reveals a guiding principle for selecting anions to tailor threshold gas admission. This study not only overcomes the kinetic limitations related to gas admission in the "molecular trapdoor" zeolites but also underscores the potential of developing MOFs as molecular trapdoor adsorbents, providing valuable insights for designing ionic MOFs tailored to diverse gas separation applications.

Molecular recognition with resolution below 0.2 angstroms through thermoregulatory oscillations in covalent organic frameworks

Crystalline materials with uniform molecular-sized pores are desirable for a broad range of applications, such as sensors, catalysis, and separations. However, it is challenging to tune the pore size of a single material continuously and to reversibly distinguish small molecules (below 4 angstroms). We synthesized a series of ionic covalent organic frameworks using a tetraphenoxyborate linkage that maintains meticulous synergy between structural rigidity and local flexibility to achieve continuous and reversible (100 thermal cycles) tunability of "dynamic pores" between 2.9 and 4.0 angstroms, with resolution below 0.2 angstroms. This results from temperature-regulated, gradual amplitude change of high-frequency linker oscillations. These thermoelastic apertures selectively block larger molecules over marginally smaller ones, demonstrating size-based molecular recognition and the potential for separating challenging gas mixtures such as oxygen/nitrogen and nitrogen/methane.

Systemic regulation of binding sites in porous coordination polymers for ethylene purification from ternary C2 hydrocarbons

The global demand for poly-grade ethylene (C2H4) is increasing annually. However, the energy-saving purification of this gas remains a major challenge due to the similarity in molecular properties among the ternary C2 hydrocarbons. To address this challenge, we report an approach of systematic tuning of the pore environment with organic sites (from -COOH to -CF3, then to -CH3) in porous coordination polymers (PCPs), of which NTU-73-CH3 shows remarkable capability for the direct production of poly-grade C2H4 from ternary C2 hydrocarbons under ambient conditions. In comparison, the precursor structure of NTU-73-COOH is unable to purify C2H4, while NTU-73-CF3 shows minimal ability to harvest C2H4. This is because the changed binding sites in the NTU-73-series not only eliminate the channel obstruction caused by the formation of gas clusters, but also enhance the interaction with acetylene (C2H2) and ethane (C2H6), as validated by in situ crystallographic and Raman analysis. Our findings, in particular the systematic tuning of the pore environment and the efficient C2H4 purification by NTU-73-CH3, provide a blueprint for the creation of advanced porous families that can handle desired tasks.

Evaluating the native oxide of titanium as an electrocatalyst for oxalic acid reduction

Herein, we show that unmodified titanium electrodes bearing the naturally-forming native TixOy coating display superior activity for the electroreduction of oxalic acid to glyoxylic acid and glycolic acid compared to Ti-based electrodes that have been deliberately modified for this purpose, in terms of both oxalic acid conversion and overall yields of reduced products.

Immobilization of Amino-site into a Pore-Partitioned Metal-Organic Framework for Highly Efficient Separation of Propyne/Propylene

Adsorptive separation of propyne/propylene (C3H4/C3H6) is a crucial yet complex process, however, it remains a great difficulty in developing porous materials that can meet the requirements for practical applications, particularly with an exceptional ability to bind and store trace amounts of C3H4. Functionalization of pore-partitioned metal-organic frameworks (ppMOFs) is methodically suited for this challenge owing to the possibility of dramatically increasing binding sites on highly porous and confined domains. We here immobilized Lewis-basic (-NH2) and Lewis-acidic (-NO2) sites on this platform. Along with an integrated nature of high uptake of C3H4 at 1 kPa, high uptake difference of C3H4-C3H6, moderated binding strength, promoted kinetic selectivity, trapping effect and high stability, the NH2-decorated ppMOF (NTU-100-NH2) can efficiently produce polymer-grade C3H6 (99.95 %, 8.3 mmol ⋅ g-1) at room temperature, which is six times more than the NO2-decorated crystal (NTU-100-NO2). The in situ infrared spectroscopy, crystallographic analysis, and sequential blowing tests showed that the densely packed amino group in this highly porous system has a unique ability to recognize and stabilize C3H4 molecules. Moving forward, the strategy of organic functionalization can be extended to other porous systems, making it a powerful tool to customize advanced materials for challenging tasks.

Functional metal-organic liquids

For decades, the study of coordination polymers (CPs) and metal-organic frameworks (MOFs) has been limited primarily to their behavior as crystalline solids. In recent years, there has been increasing evidence that they can undergo reversible crystal-to-liquid transitions. However, their "liquid" states have primarily been considered intermediate states, and their diverse properties and applications of the liquid itself have been overlooked. As we learn from organic polymers, ceramics, and metals, understanding the structures and properties of liquid states is essential for exploring new properties and functions that are not achievable in their crystalline state. This review presents state-of-the-art research on the liquid states of CPs and MOFs while discussing the fundamental concepts involved in controlling them. We consider the different types of crystal-to-liquid transitions found in CPs and MOFs while extending the interpretation toward other functional metal-organic liquids, such as metal-containing ionic liquids and porous liquids, and try to suggest the unique features of CP/MOF liquids. We highlight their potential applications and present an outlook for future opportunities.

Excitation generated preferential binding sites for ethane on porous carbon-copper porphyrin sorbents: ethane/ethylene adsorptive separation improved by light

Energy-efficient separation of C2H6/C2H4 is a great challenge, for which adsorptive separation is very promising. C2H6-selective adsorption has big implications, while the design of C2H6-sorbents with ideal adsorption capability, particularly with the C2H6/C2H4-selectivity exceeded 2.0, is still challenging. Instead of the current strategies such as chemical modification or pore space modulation, we propose a new methodology for the design of C2H6-sorbents. With a Cu-TCPP [TCPP = 5,10,15,20-tetrakis(4-carboxyphenyl)porphyrin] framework dispersed onto a microporous carbon and a hierarchical-pore carbon, two composite sorbents are fabricated. The composite sorbents exhibit enhanced C2H6-selective adsorption capabilities with visible light, particularly the composite sorbent based on the hierarchical-pore carbon, whose C2H6 and C2H4 adsorption capacities (0 °C, 1 bar) are targetedly increased by 27% and only 1.8% with visible light, and therefore, an C2H6-selectivity (C2H6/C2H4 = 10/90, v/v) of 4.8 can be realized. With visible light, the adsorption force of the C2H6 molecule can be asymmetrically enhanced by the excitation enriched electron density over the adsorption sites formed via the close interaction between the Cu-TCPP and the carbon layer, whereas that of the C2H4 molecule is symmetrically altered and the forces cancelled each other out. This strategy may open up a new route for energy-efficient adsorptive separation of C2H6/C2H4 with light.

Resistive Memristors Using Robust Electropolymerized Porous Organic Polymer Films as Switchable Materials

Porous organic polymers (POPs) with inherent porosity, tunable pore environment, and semiconductive property are ideally suitable for application in various advanced semiconductor-related devices. However, owing to the lack of processability, POPs are usually prepared in powder forms, which limits their application in advanced devices. Herein, we demonstrate an example of information storage application of POPs with film form prepared by an electrochemical method. The growth process of the electropolymerized films in accordance with the Volmer-Weber model was proposed by observation of atomic force microscopy. Given the mechanism of the electron transfer system, we verified and mainly emphasized the importance of porosity and interfacial properties of porous polymer films for memristor. As expected, the as-fabricated memristors exhibit good performance on low turn-on voltage (0.65 ± 0.10 V), reliable data storage, and high on/off current ratio (104). This work offers inspiration for applying POPs in the form of electropolymerized films in various advanced semiconductor-related devices.

Fine-regulation of gradient gate-opening in nanoporous crystals for sieving separation of ternary C3 hydrocarbons

The adsorptive separation of ternary propyne (C3H4)/propylene (C3H6)/propane (C3H8) mixtures is of significant importance due to its energy efficiency. However, achieving this process using an adsorbent has not yet been accomplished. To tackle such a challenge, herein, we present a novel approach of fine-regulation of the gradient of gate-opening in soft nanoporous crystals. Through node substitution, an exclusive gate-opening to C3H4 (17.1 kPa) in NTU-65-FeZr has been tailored into a sequential response of C3H4 (1.6 kPa), C3H6 (19.4 kPa), and finally C3H8 (57.2 kPa) in NTU-65-CoTi, of which the gradient framework changes have been validated by in situ powder X-ray diffractions and modeling calculations. Such a significant breakthrough enables NTU-65-CoTi to sieve the ternary mixtures of C3H4/C3H6/C3H8 under ambient conditions, particularly, highly pure C3H8 (99.9%) and C3H6 (99.5%) can be obtained from the vacuum PSA scheme. In addition, the fully reversible structural change ensures no loss in performance during the cycling dynamic separations. Moving forward, regulating gradient gate-opening can be conveniently extended to other families of soft nanoporous crystals, making it a powerful tool to optimize these materials for more complex applications.

Powders to Thin Films: Advances in Conjugated Microporous Polymer Chemical Sensors

Chemical sensing of harmful species released either from natural or anthropogenic activities is critical to ensuring human safety and health. Over the last decade, conjugated microporous polymers (CMPs) have been proven to be potential sensor materials with the possibility of realizing sensing devices for practical applications. CMPs found to be unique among other porous materials such as metal-organic frameworks (MOFs) and covalent organic frameworks (COFs) due to their high chemical/thermal stability, high surface area, microporosity, efficient host-guest interactions with the analyte, efficient exciton migration along the π-conjugated chains, and tailorable structure to target specific analytes. Several CMP-based optical, electrochemical, colorimetric, and ratiometric sensors with excellent selectivity and sensing performance were reported. This review comprehensively discusses the advances in CMP chemical sensors (powders and thin films) in the detection of nitroaromatic explosives, chemical warfare agents, anions, metal ions, biomolecules, iodine, and volatile organic compounds (VOCs), with simultaneous delineation of design strategy principles guiding the selectivity and sensitivity of CMP. Preceding this, various photophysical mechanisms responsible for chemical sensing are discussed in detail for convenience. Finally, future challenges to be addressed in the field of CMP chemical sensors are discussed.

On-Demand Tunable Electrical Conductance Anisotropy in a MOF-Polymer Composite

Property optimization through orientation control of metal-organic framework (MOF) crystals that exhibit anisotropic crystal structures continues to garner tremendous interest. Herein, an electric field is utilized to post-synthetically control the orientation of conductive layered Cu3(HHTP)2 (HHTP = 2,3,6,7,10,11-hexahydroxytriphenylene) crystals dispersed in an electronically insulating poly(ethylene glycol) diacrylate (PEGDA) oligomer matrix. Optical and electrical measurements are performed to investigate the impact of the electric field on the alignment of Cu3(HHTP)2 crystals and the formation of aggregated microstructures, which leads to an ≈5000-fold increase in the conductivity of the composite. Notably, the composite thin-films containing aligned Cu3(HHTP)2 crystals exhibit significant conductivity of ≈10-3 S cm-1 despite the low concentration (≈1 wt.%) of conductive Cu3(HHTP)2. The use of an electric field to align Cu3(HHTP)2 crystals can rapidly generate various desired patterns that exhibit on-demand tunable collective charge transport anisotropy. The findings provide valuable insights toward the manipulation and utilization of conductive MOFs with anisotropic crystal structures for various applications such as adhesive electrical interconnects and microelectronics.

Positional Thiophene Isomerization: A Geometric Strategy for Precisely Regulating the Electronic State of Covalent Organic Frameworks to Boost Oxygen Reduction

With the oxygen conversion efficiency of metal-free carbon-based fuel cells dramatically improved, the building blocks of covalent organic frameworks (COFs) raised principal concerns on the catalytic active sites with indistinct electronic states. Herein, to address this issue, we demonstrate COFs for oxygen reduction reaction (ORR) by regulating the edge-hanging thiophene units, and the molecular geometries are further modulated via positional thiophene isomerization strategy, affording isomeric COF-α with 2-substitution and COF-β with 3-substitution on the frameworks. The electronic states and intermediate adsorption ability are well-regulated through geometric modification, resulting in controllable chemical activity and local density of π-electrons. Notably, the introduction of thiophene units with different substitution positions into a pristine pure carbon-based COF model COF-Ph achieves excellent activity with a half-wave potential of 0.76 V versus the reversible hydrogen electrode, which is higher than most of those metal-free or metal-based electrocatalysts. Utilizing the combination of theoretical prediction and in situ Raman spectra, we show that the isomeric thiophene skeleton (COF-α and COF-β) can induce the dangling unit activation, accurately identifying the pentacyclic-carbon (thiophene α-position) adjacent to sulfur atom as active sites. The results suggest that the isomeric dangling groups in COFs are suitable for the ORR with promising geometry construction.

Diffusion-rate sieving of propylene and propane mixtures in a cooperatively dynamic porous crystal

Selective molecular recognition is an important alternative to the energy-intensive industrial separation process. Porous coordination polymers (PCPs) offer designing platforms for gas separation because they possess precise controllability over structures at the molecular level. However, PCPs-based gas separations are dominantly achieved using strong adsorptive sites for thermodynamic recognition or pore-aperture control for size sieving, which suffer from insufficient selectivity or sluggish kinetics. Developing PCPs that work at high temperatures and feature both high uptake capacity and selectivity is urgently required but remains challenging. Herein, we report diffusion-rate sieving of propylene/propane (C3H6/C3H8) at 300 K by constructing a PCP material whose global and local dynamics cooperatively govern the adsorption process via the mechanisms of the gate opening for C3H6 and the diffusion regulation for C3H8, respectively, yielding substantial differences in both uptake capacity and adsorption kinetics. Dynamic separation of an equimolar C3H6/C3H8 mixture reveals outstanding sieving performance with a C3H6 purity of 99.7% and a separation factor of 318.

Controlling Film Formation and Host-Guest Interactions to Enhance the Thermoelectric Properties of Nickel-Nitrogen-Based 2D Conjugated Coordination Polymers

2D conjugated coordination polymers (cCPs) based on square-planar transition metal-complexes (such as MO4, M(NH)4, and MS4, M = metal) are an emerging class of (semi)conducting materials that are of great interest for applications in supercapacitors, catalysis, and thermoelectrics. Finding synthetic approaches to high-performance nickel-nitrogen (Ni-N) based cCP films is a long-standing challenge. Here, a general, dynamically controlled on-surface synthesis that produces highly conductive Ni-N-based cCP films is developed and the thermoelectric properties as a function of the molecular structure and their dependence on interactions with ambient atmosphere are studied. Among the four studied cCPs with different ligand sizes hexaminobenzene- and hexaaminotriphenylene-based films exhibit record electrical conductivity (100-200 S cm-1) in this Ni-N based cCP family, which is one order of magnitude higher than previous reports, and the highest thermoelectric power factors up to 10 µW m-1 K-2 among reported 2D cCPs. The transport physics of these films is studied and it is shown that depending on the host-guest interaction with oxygen/water the majority carrier type and the value of the Seebeck coefficient can be largely regulated. The high conductivity is likely reflecting good interconnectivity between (small) ordered domains and grain boundaries supporting disordered metallic transport.

Temperature-Dependent Separation of CO2 from Light Hydrocarbons in a Porous Self-Assembly of Vertexes Sharing Octahedra

Design of flexible porous materials where the diffusion of guest molecules is regulated by the dynamics of contracted pore aperture is challenging. Here, a flexible porous self-assembly consisting of 1D channels with dynamic bottleneck gates is reported. The dynamic pendant naphthimidazolylmethyl moieties at the channel necks provide kinetic gate function, that enables unusual adsorption for light hydrocarbons. The adsorption for CO2 is mainly dominated by thermodynamics with the uptakes decreasing with increasing temperature, whereas the adsorptions for larger hydrocarbons are controlled by both thermodynamics and kinetics resulting in an uptake maximum at a temperature threshold. Such an unusual adsorption enables temperature-dependent separation of CO2 from the corresponding hydrocarbons.

Ordered Mesoporous Crystalline Frameworks Toward Promising Energy Applications

Ordered mesoporous crystalline frameworks (MCFs), which possess both functional frameworks and well-defined porosity, receive considerable attention because of their unique properties including high surface areas, large pore sizes, tailored porous structures, and compositions. Construction of novel crystalline mesoporous architectures that allows for rich accessible active sites and efficient mass transfer is envisaged to offer ample opportunities for potential energy-related applications. In this review, the rational synthesis, unique structures, and energy applications of MCFs are the main focus. After summarizing the synthetic approaches, an emphasis is placed on the delicate control of crystallites, mesophases, and nano-architectures by concluding basic principles and showing representative examples. Afterward, the currently fabricated components of MCFs such as metals, metal oxides, metal sulfides, and metal-organic frameworks are described in sequence. Further, typical applications of MCFs in rechargeable batteries, supercapacitors, electrocatalysis, and photocatalysis are highlighted. This review ends with the possible development and synthetic challenges of MCFs as well as a future prospect for high-efficiency energy applications, which underscores a pathway for developing advanced materials.

Iodine Adsorption-Desorption-Induced Structural Transformation and Improved Ag+ Turn-On Luminescent Sensing Performance of a Nonporous Eu(III) Metal-Organic Framework

Posttreatment of pristine metal-organic frameworks (MOFs) with suitable vapor may be an effective way to regulate their structures and properties but has been less explored. Herein, we report an interesting example in which a crystalline nonporous Eu(III)-MOF was transferred to a porous amorphous MOF (aMOF) via iodine vapor adsorption-desorption posttreatment, and the resulting aMOF showed improved turn-on sensing properties with respect to Ag+ ions. The crystalline Eu-MOF, namely, Eu-IPDA, was assembled from Eu(III) and 4,4'-{4-[4-(1H-imidazol-1-yl)phenyl]pyridine-2,6-diyl}dibenzoic acid (H2IPDA) and exhibited a two-dimensional (2D) coordination network based on one-dimensional secondary building blocks. The close packing of the 2D networks gives rise to a three-dimensional supramolecular framework without any significant pores. Interestingly, the nonporous Eu-IPDA could absorb iodine molecules when Eu-IPDA crystals were placed in iodine vapor at 85 °C, and the adsorption capacity was 1.90 g/g, which is comparable to those of many MOFs with large BET surfaces. The adsorption of iodine is attributed to the strong interactions among the iodine molecule, the carboxy group, and the N-containing group and leads to the amorphization of the framework. After immersion of the iodine-loaded Eu-IPDA in EtOH, approximately 89.7% of the iodine was removed, resulting in a porous amorphous MOF, denoted as a-Eu-IPDA. In addition, the remaining iodine in the a-Eu-IPDA framework causes strong luminescent quenching in the fluorescence emission region of the Eu(III) center when compared with that in Eu-IPDA. The luminescence intensity of a-Eu-IPDA in water suspensions was significantly enhanced when Ag+ ions were added, with a detection limit of 4.76 × 10-6 M, which is 1000 times that of pristine Eu-IPDA. It also showed strong anti-interference ability over many common competitive metal ions and has the potential to sense Ag+ in natural water bodies and traditional Chinese medicine preparations. A mechanistic study showed that the interactions between Ag+ and the absorbed iodine, the carboxylate group, and the N atoms all contribute to the sensing performance of a-Eu-IPDA.

Advanced Soft Porous Organic Crystal with Multiple Gas-Induced Single-Crystal-to-Single-Crystal Transformations for Highly Selective Separation of Propylene and Propane

Soft porous organic crystals with stimuli-responsive single-crystal-to-single-crystal (SCSC) transformations are important tools for unraveling their structural transformations at the molecular level, which is of crucial importance for the rapid development of stimuli-responsive systems. Carefully balancing the crystallinity and flexibility of materials is the prerequisite to construct advanced organic crystals with SCSC, which remains challenging. Herein, a squaraine-based soft porous organic crystal (SPOC-SQ) with multiple gas-induced SCSC transformations and temperature-regulated gate-opening adsorption of various C1-C3 hydrocarbons is reported. SPOC-SQ is featured with both crystallinity and flexibility, which enable pertaining the single crystallinity of the purely organic framework during accommodating gas molecules and directly unveiling gas-framework interplays by SCXRD technique. Thanks to the excellent softness of SPOC-SQ crystals, multiple metastable single crystals are obtained after gas removals, which demonstrates a molecular-scale shape-memory effect. Benefiting from the single crystallinity, the molecule-level structural evolutions of the SPOC-SQ crystal framework during gas departure are uncovered. With the unique temperature-dependent gate-opening structural transformations, SPOC-SQ exhibits distinctly different absorption behaviors towards C3 H6 and C3 H8 , and highly efficient and selective separation of C3 H6 /C3 H8 (v/v, 50/50) is achieved at 273 K. Such advanced soft porous organic crystals are of both theoretical values and practical implications.

Atomic observation and structural evolution of covalent organic framework rotamers

Dynamic 3D covalent organic frameworks (COFs) have shown concerted structural transformation and adaptive gas adsorption due to the conformational diversity of organic linkers. However, the isolation and observation of COF rotamers constitute undergoing challenges due to their comparable free energy and subtle rotational energy barrier. Here, we report the atomic-level observation and structural evolution of COF rotamers by cryo-3D electron diffraction and synchrotron powder X-ray diffraction. Specifically, we optimize the crystallinity and morphology of COF-320 to manifest its coherent dynamic responses upon adaptive inclusion of guest molecules. We observe a significant crystal expansion of 29 vol% upon hydration and a giant swelling with volume change up to 78 vol% upon solvation. We record the structural evolution from a non-porous contracted phase to two narrow-pore intermediate phases and the fully opened expanded phase using n-butane as a stabilizing probe at ambient conditions. We uncover the rotational freedom of biphenylene giving rise to significant conformational changes on the diimine motifs from synclinal to syn-periplanar and anticlinal rotamers. We illustrate the 10-fold increment of pore volumes and 100% enhancement of methane uptake capacity of COF-320 at 100 bar and 298 K. The present findings shed light on the design of smarter organic porous materials to maximize host-guest interaction and boost gas uptake capacity through progressive structural transformation.

Hydrogen bond unlocking-driven pore structure control for shifting multi-component gas separation function

Purification of ethylene (C2H4) as the most extensive and output chemical, from complex multi-components is of great significance but highly challenging. Herein we demonstrate that precise pore structure tuning by controlling the network hydrogen bonds in two highly-related porous coordination networks can shift the efficient C2H4 separation function from C2H2/C2H4/C2H6 ternary mixture to CO2/C2H2/C2H4/C2H6 quaternary mixture system. Single-crystal X-ray diffraction revealed that the different amino groups on the triazolate ligands resulted in the change of the hydrogen bonding in the host network, which led to changes in the pore shape and pore chemistry. Gas adsorption isotherms, adsorption kinetics and gas-loaded crystal structure analysis indicated that the coordination network Zn-fa-atz (2) weakened the affinity for three C2 hydrocarbons synchronously including C2H4 but enhanced the CO2 adsorption due to the optimized CO2-host interaction and the faster CO2 diffusion, leading to effective C2H4 production from the CO2/C2H2/C2H4/C2H6 mixture in one step based on the experimental and simulated breakthrough data. Moreover, it can be shaped into spherical pellets with maintained porosity and separation performance.

Temperature-dependent molecular sieving of fluorinated propane/propylene mixtures by a flexible-robust metal-organic framework

The electronics industry necessitates highly selective adsorption separation of hexafluoropropylene (C3F6) from perfluoropropane (C3F8), which poses a challenge due to their similar physiochemical properties. In this work, we present a microporous flexible-robust metal-organic framework (Ca-tcpb) with thermoregulatory gate opening, a rare phenomenon that allows tunable sieving of C3F8/C3F6. Remarkably, the temperature-dependent adsorption behavior enhances the discrimination between the larger C3F8 and the smaller C3F6, resulting in unprecedented C3F6/C3F8 selectivity (over 10,000) compared to other well-known porous materials at an optimal temperature (298 K). Dynamic breakthrough experiments demonstrate that high-purity C3F8 (over 99.999%) could be obtained from a C3F6/C3F8 (10:90) mixture under ambient conditions. The unique attributes of this material encompass exceptional adsorption selectivity, remarkable structural stability, and outstanding separation performance, positioning it as a highly promising candidate for C3F6/C3F8 separation. Single-crystal structural analysis of C3F6-loaded Ca-tcpb and theoretical calculations elucidate the host-guest interaction via multiple intermolecular interactions.

A molecular sieve with ultrafast adsorption kinetics for propylene separation

The design of molecular sieves is vital for gas separation, but it suffers from a long-standing issue of slow adsorption kinetics due to the intrinsic contradiction between molecular sieving and diffusion within restricted nanopores. We report a molecular sieve ZU-609 with local sieving channels that feature molecular sieving gates and rapid diffusion channels. The precise cross-sectional cutoff of molecular sieving gates enables the exclusion of propane from propylene. The coexisting large channels constituted by sulfonic anions and helically arranged metal-organic architectures allow the fast adsorption kinetics of propylene, and the measured propylene diffusion coefficient in ZU-609 is one to two orders of magnitude higher than previous molecular sieves. Propylene with 99.9% purity is obtained through breakthrough experiments with a productivity of 32.2 L kg-1.

Design of Boron and Transition Metal Embedded Two-Dimensional Porous Carbon Nitride for Electrocatalytic Synthesis of Urea

Electrocatalytic coupling of CO and N2 to synthesize urea under ambient conditions is considered a promising strategy to replace traditional industrial technology. It is crucial to find efficient electrocatalysts that can adsorb and activate N2 and promote the C-N coupling reaction. Herein, a new two-dimensional porous carbon nitride material with multiactive sites is designed, in which boron and transition metal are embedded. Through a series of screening, B2Cr2, B2Mn2, and B2Os2 are predicted to be potential electrocatalysts for urea synthesis. Mechanistic studies are performed on bidentate metal-metal and metal-boron sites, and both NCON and CO mechanisms are explored. The electronic structure analysis shows that there is a strong N2 chemical adsorption within the bidentate site and that the N≡N bond is significantly activated. A new mechanism where free CO is inserted for C-N coupling within the two-dimensional porous structure is proposed.

Switching molecular recognition selectivities by temperature in a diffusion-regulatory porous material

Over the long history of evolution, nature has developed a variety of biological systems with switchable recognition functions, such as the ion transmissibility of biological membranes, which can switch their ion selectivities in response to diverse stimuli. However, developing a method in an artificial host-guest system for switchable recognition of specific guests upon the change of external stimuli is a fundamental challenge in chemistry because the order in the host-guest affinity of a given system hardly varies along with environmental conditions. Herein, we report temperature-responsive recognition of two similar gaseous guests, CO2 and C2H2, with selectivities switched by temperature change by a diffusion-regulatory mechanism, which is realized by a dynamic porous crystal featuring ultrasmall pore apertures with flip-flop locally-motive organic moiety. The dynamic local motion regulates the diffusion process of CO2 and C2H2 and amplifies their rate differences, allowing the crystal to selectively adsorb CO2 at low temperatures and C2H2 at high temperatures with separation factors of 498 (CO2/C2H2) and 181 (C2H2/CO2), respectively.

Long Time CO2 Storage Under Ambient Conditions in Isolated Voids of a Porous Coordination Network Facilitated by the "Magic Door" Mechanism

A coordination network containing isolated pores without interconnecting channels is prepared from a tetrahedral ligand and copper(I) iodide. Despite the lack of accessibility, CO2 is selectively adsorbed into these pores at 298 K and then retained for more than one week while exposed to the atmosphere. The CO2 adsorption energy and diffusion mechanism throughout the network are simulated using Matlantis, which helps to rationalize the experimental results. CO2 enters the isolated voids through transient channels, termed "magic doors", which can momentarily appear within the structure. Once inside the voids, CO2 remains locked in limiting its escape. This mechanism is facilitated by the flexibility of organic ligands and the pivot motion of cluster units. In situ powder X-ray diffraction revealed that the crystal structure change is negligible before and after CO2 capture, unlike gate-opening coordination networks. The uncovered CO2 sorption and retention ability paves the way for the design of sorbents based on isolated voids.

Molecular Sieving of Propyne/Propylene by a Scalable Nanoporous Crystal with Confined Rotational Shutters

Soft porous coordination polymers (PCPs) have the remarkable ability to recognize similar molecules as a result of their structural dynamics. However, their guest-induced gate-opening behaviors often lead to issues with selectivity and separation efficiency, as co-adsorption is nearly unavoidable. Herein, we report a strategy of a confined-rotational shutter, in which the rotation of pyridyl rings within the confined nanospace of a halogen-bonded coordination framework (NTU-88) creates a maximum aperture of 4.4 Å, which is very close to the molecular size of propyne (C3 H4 : 4.4 Å), but smaller than that of propylene (C3 H6 : 5.4 Å). This has been evidenced by crystallographic analyses and modelling calculations. The NTU-88o (open phase of activated NTU-88) demonstrates dedicated C3 H4 adsorption, and thereby leads to a sieving separation of C3 H4 /C3 H6 under ambient conditions. The integrated nature of high uptake ratio, considerable capacity, scalable synthesis, and good stability make NTU-88 a promising candidate for the feasible removal of C3 H4 from C3 H4 /C3 H6 mixtures. In principle, this strategy holds high potential for extension to soft families, making it a powerful tool for optimizing materials that can tackle challenging separations with no co-adsorption, while retaining the crucial aspect of high capacity.

Structural Modulation of Nitrogen-Rich Covalent Organic Frameworks for Iodine Capture

Developing efficient adsorbent materials for iodine scavenging is essential to mitigate the threat of radioactive iodine causing adverse effects on human health and the environment. In this context, we explored N-rich two-dimensional covalent organic frameworks (COFs) with diverse functionalities for iodine capture. The pyridyl-hydroxyl-functionalized triazine-based novel 5,5',5″-(1,3,5-triazine-2,4,6-triyl)tris(pyridine-2-amine) (TTPA)-COF possesses high crystallinity (crystalline domain size: 24.4 ± 0.6 nm) and high porosity (specific BET surface area: 1000 ± 90 m2 g-1). TTPA-COF exhibits superior vapor-phase iodine adsorption (4.43 ± 0.01 g g-1) compared to analogous COF devoid of pyridinic moieties, 2,4,6-tris(4-aminophenyl)-1,3,5-triazine (TAPT)-COF. The high iodine capture by TTPA-COF is due to the enhanced binding affinity conferred by the extra pyridinic active sites. Furthermore, the crucial role of long-range order in porous adsorbents has been experimentally evidenced by comparing the performance of iodine vapor capture of TTPA-COF with an amorphous network polymer having identical functionalities. We have also demonstrated the high iodine scavenging ability of TTPA-COF from the organic and aqueous phases. The mechanism of iodine adsorption by the heteroatom-rich framework is elucidated through FTIR, XPS, and Raman spectral analyses. The present study highlights the need for structural tweaking of the building blocks toward the rational construction of advanced functional porous materials for a task-specific application.

Delicate Softness in a Temperature-Responsive Porous Crystal for Accelerated Sieving of Propylene/Propane

Soft nanoporous crystals with structural dynamics are among the most exciting recently discovered materials. However, designing or controlling a porous system with delicate softness that can recognize similar gas pairs, particularly for the promoted ability at increased temperature, remains a challenge. Here, we report a soft crystal (NTU-68) with a one-dimensional (1D) channel that expands and contracts delicately around 4 Å at elevated temperature. The completely different adsorption processes of propane (C3H8: kinetic dominance) and propylene (C3H6: thermodynamic preference) allow the crystal to show a sieving separation of this mixtures (9.9 min·g-1) at 273 K, and the performance increases more than 2-fold (20.4 min·g-1) at 298 K. This phenomenon is contrary to the general observation for adsorption separation: the higher the temperature, the lower the efficiency. Gas-loaded in situ powder X-ray analysis and modeling calculations reveal that slight pore expansion caused by the increased temperature provides plausible nanochannel for adsorption of the relatively smaller C3H6 while maintaining constriction on the larger C3H8. In addition, the separation process remains unaffected by the general impurities, demonstrating its true potential as an alternative sorbent for practical applications. Moving forward, the delicate crystal dynamics and promoted capability for molecular recognition provide a new route for the design of next-generation sieve materials.

Carbon dioxide adsorption to UiO-66: theoretical analysis of binding energy and NMR properties

UiO-66 is one of the most valuable metal-organic frameworks because of its excellent adsorption capability for gas molecules and its high stability towards water. Herein we investigated adsorption of carbon dioxide (CO2), acetone, and methanol to infinite UiO-66 using DFT calculations on an infinite system under periodic-boundary conditions and post-Hartree-Fock (SCS-MP2 and MP2.5) calculations on cluster models. Three to four molecules are adsorbed at each of four μ-OH groups bridging three Zr atoms in one unit cell (named Site I). Six molecules are adsorbed around three pillar ligands, where the molecule is loosely surrounded by three terephthalate ligands (named Site II). Also, six molecules are adsorbed around the pillar ligand in a different manner from that at Site II, where the molecule is surrounded by three terephthalate ligands (named Site III). Totally fifteen to sixteen CO2 molecules are adsorbed into one unit cell of UiO-66. The binding energy (BE) decreases in the order Site I > Site III > Site II for all three molecules studied here and in the order acetone > methanol ≫ CO2 in the three adsorption sites. At the site I, the protonic H atom of the μ-OH group interacts strongly with the negatively charged O atom of CO2, acetone and methanol, which is the origin of the largest BE value at this site. Although the DFT calculations present these decreasing orders of BE values correctly, the correction by post-Hartree-Fock calculations is not negligibly small and must be added for obtaining better BE values. We explored NMR spectra of UiO-66 with adsorbed CO2 molecules and found that the isotropic shielding constants of the 1H atom significantly differ among no CO2, one CO2 (at Sites I, II, or III), and fifteen CO2 adsorption cases (Sites I to III) but the isotropic 17O and 13C shielding constants change moderately by adsorption of fifteen CO2 molecules. Thus, 1H NMR measurement is a useful experiment for investigating CO2 adsorption.

A Nitro-Modified Luminescent Hydrogen-Bonded Organic Framework for Non-Contact and High-Contrast Sensing of Aromatic Amines

The global demand for intelligent sensing of aromatic amines has consistently increased due to concerns about health and the environment. Efforts to improve material design and understand mechanisms have been made, but highly efficient non-contact sensing with host-guest structures remains a challenge. Herein, we report the first example of non-contact, high-contrast sensing of aromatic amines in a hydrogen-bonded organic framework (HOF) based on a nitro-modified stereo building block. Direct observation of binding interactions of trapped amines is achieved, leading to charge separation-induced emission quenching between host and guests. Non-contact sensing of aniline and diphenylamine is realized with quenching efficiencies up to 91.7 % and 97.0 %, which shows potential for versatile applications. This work provides an inspiring avenue to engineer multifunctional HOFs via co-crystal preparations, thus enriching applications of porous materials with explicit mechanisms.

Ultrasensitive discrimination of volatile organic compounds using a microfluidic silicon SERS artificial intelligence chip

Current gaseous sensors hardly discriminate trace volatile organic compounds at the ppt level. Herein, we present an integrated platform for simultaneously enabling rapid preconcentration, reliable surface-enhanced Raman scattering, (SERS) detection and automatic identification of trace aldehydes at the ppt level. For rapid preconcentration, we demonstrate that the nozzle-like microfluidic concentrator allows the enrichment of rare gaseous analytes by five-fold in only 0.01 ms. The enriched gas is subsequently captured and detected by an integrated silicon-based SERS chip, which is made of zeolitic imidazolate framework-8 coated silver nanoparticles grown in situ on a silicon wafer. After SERS measurement, a fully connected deep neural network is built to extract faint features in the spectral dataset and discriminate volatile organic compound classes. We demonstrate that six kinds of gaseous aldehydes at 100 ppt could be detected and classified with an identification accuracy of ∼80.9% by using this platform.

Facet-controlled assembly for organizing metal-organic framework particles into extended structures

Metal-organic frameworks (MOFs) are crystalline porous materials characterized by their high porosity and chemical tailorability. To realize the full potential of synthesized MOFs, it is important to transform them from crystalline solid powders into materials with integrated morphologies and properties. One promising approach is facet-controlled assembly, which involves arranging individual crystalline MOF particles into ordered macroscale structures by carefully controlling the interactions between particles. The resulting assembled MOF structures maintain the characteristics of individual particles while also exhibiting improved properties overall. In this article, we emphasize the essential concepts of MOF assembly, highlighting the impact of building blocks, surface interactions, and Gibbs free energy on the assembly process. We systematically examine three methods of guiding facet-controlled MOF assembly, including spontaneous assembly, assembly guided by external forces, and assembly through surface modifications. Lastly, we offer outlooks on future advancements in the fabrication of MOF-based material and potential application exploration.

Crossover Sorption of C2 H2 /CO2 and C2 H6 /C2 H4 in Soft Porous Coordination Networks

Porous sorbents are materials that are used for various applications, including storage and separation. Typically, the uptake of a single gas by a sorbent decreases with temperature, but the relative affinity for two similar gases does not change. However, in this study, we report a rare example of "crossover sorption," in which the uptake capacity and apparent affinity for two similar gases reverse at different temperatures. We synthesized two soft porous coordination polymers (PCPs), [Zn2 (L1)(L2)2 ]n (PCP-1) and [Zn2 (L1)(L3)2 ]n (PCP-2) (L1= 1,4-bis(4-pyridyl)benzene, L2=5-methyl-1,3-di(4-carboxyphenyl)benzene, and L3=5-methoxy-1,3-di(4-carboxyphenyl)benzene). These PCPs exhibits structural changes upon gas sorption and show the crossover sorption for both C2 H2 /CO2 and C2 H6 /C2 H4 , in which the apparent affinity reverse with temperature. We used in situ gas-loading single-crystal X-ray diffraction (SCXRD) analysis to reveal the guest inclusion structures of PCP-1 for C2 H2 , CO2 , C2 H6 , and C2 H4 gases at various temperatures. Interestingly, we observed three-step single-crystal to single-crystal (sc-sc) transformations with the different loading phases under these gases, providing insight into guest binding positions, nature of host-guest or guest-guest interactions, and their phase transformations upon exposure to these gases. Combining with theoretical investigation, we have fully elucidated the crossover sorption in the flexible coordination networks, which involves a reversal of apparent affinity and uptake of similar gases at different temperatures. We discovered that this behaviour can be explained by the delicate balance between guest binding and host-guest and guest-guest interactions.