Mechanically induced cationic reversible addition-fragmentation chain transfer polymerization of vinyl ethers

Mechanoredox catalysis has emerged as a sustainable approach for organic transformations. Mechanically controlled polymerization that uses mechanoredox catalysts enables synthesis of complex polymers and mechanoresponsive materials with diverse applications. Despite its potential, the focus has predominantly been on free radical polymerization and acrylate monomers. The mechanochemical synthesis of poly(vinyl ether)s (PVEs) poses a significant challenge in the field. Herein, we report an efficient mechanically induced cationic reversible addition-fragmentation chain transfer (mechano-cRAFT) polymerization using 2D MoS2 as a mechanoredox catalyst, where free radical intermediates can be further oxidized to cations to promote cationic polymerization of vinyl ethers. This mechano-cRAFT polymerization can be conducted in air and with minimal organic solvent, resulting in quantitative monomer conversion. This strategy is applicable to a range of vinyl ether monomers, yielding polymers with controlled molecular weight and narrow dispersity. We also performed trapping experiments to investigate the piezoelectrically mediated redox process, and further validated the mechanism through density functional theory (DFT) calculations.

Mechanochemical Controlled Radical Polymerization: From Harsh to Mild

Mechanochemistry constitutes a burgeoning field that investigates the chemical and physicochemical alterations of substances under mechanical force. It enables the synthesis of materials which is challenging to obtain via thermal, optical or electrical activation methods. In addition, it diminishes reliance on organic solvents and provides a novel route for green chemistry. Today, as a distinct branch alongside electrochemistry, photochemistry, and thermochemistry, mechanochemistry has emerged as a frontier research domain within chemistry and material science. In recent years, the intersection of mechanochemistry with controlled radical polymerization has witnessed rapid advancements, providing new routes to polymer science. Significantly, we have experienced breakthroughs in methods relying on sonochemistry, piezoelectricity and contact electrification. These methodologies not only facilitate the synthesis of polymers with high molecular weight but also enable precise control over polymer chain length and structure. Transitioning from harsh to mild conditions in mechanochemical routes has facilitated a significant improvement in the controllability of mechanochemical polymerization. From this perspective, we introduce the progress of mechanochemistry in controlled radical polymerization in recent years, aim to clarify the historcial development of this topic.

Mechanochemistry: Fundamental Principles and Applications

Mechanochemistry is an emerging research field at the interface of physics, mechanics, materials science, and chemistry. Complementary to traditional activation methods in chemistry, such as heat, electricity, and light, mechanochemistry focuses on the activation of chemical reactions by directly or indirectly applying mechanical forces. It has evolved as a powerful tool for controlling chemical reactions in solid state systems, sensing and responding to stresses in polymer materials, regulating interfacial adhesions, and stimulating biological processes. By combining theoretical approaches, simulations and experimental techniques, researchers have gained intricate insights into the mechanisms underlying mechanochemistry. In this review, the physical chemistry principles underpinning mechanochemistry are elucidated and a comprehensive overview of recent significant achievements in the discovery of mechanically responsive chemical processes is provided, with a particular emphasis on their applications in materials science. Additionally, The perspectives and insights into potential future directions for this exciting research field are offered.

Triphasic Hydroxysilylation of Alkenes by Mechanically Piezoelectric Catalysis

The 1,2-hydroxysilylation of alkenes is crucial for synthesizing organosilicon compounds which are key intermediates in material science, pharmaceuticals, and organic synthesis. The development of strategies employing hydrogen atom transfer pathways is currently hindered by the existence of various competing reactions. Herein, we reported a novel mechanochemical strategy for the triphasic 1,2-hydroxysilylation of alkenes through a single-electron-transfer pathway. Our approach not only circumvents competitive reactions to enable the first-ever 1,2-hydroxysilylation of unactivated alkenes but also pioneers the research in mechanic force-induced triphasic reactions under ambient conditions. This gentle method offers excellent compatibility with various functional groups, operates under simple and solvent-free conditions, ensures rapid reaction time. Preliminary mechanistic investigations suggest that silylboronate can be transformed to a silicon radical by highly polarized Li2TiO3 particles and oxygen under ball-milling condition.

Aerobic mechanochemical reversible-deactivation radical polymerization

Polymer materials suffer mechano-oxidative deterioration or degradation in the presence of molecular oxygen and mechanical forces. In contrast, aerobic biological activities combined with mechanical stimulus promote tissue regeneration and repair in various organs. A synthetic approach in which molecular oxygen and mechanical energy synergistically initiate polymerization will afford similar robustness in polymeric materials. Herein, aerobic mechanochemical reversible-deactivation radical polymerization was developed by the design of an organic mechano-labile initiator which converts oxygen into activators in response to ball milling, enabling the reaction to proceed in the air with low-energy input, operative simplicity, and the avoidance of potentially harmful organic solvents. In addition, this approach not only complements the existing methods to access well-defined polymers but also has been successfully employed for the controlled polymerization of (meth)acrylates, styrenic monomers and solid acrylamides as well as the synthesis of polymer/perovskite hybrids without solvent at room temperature which are inaccessible by other means.

Mechanical-Force-Induced Non-spontaneous Dehalogenative Deuteration of Aromatic Iodides Enabled by Using Piezoelectric Materials as a Redox Catalyst

The development of green and efficient deuteration methods is of great significance for various fields such as organic synthesis, analytical chemistry, and medicinal chemistry. Herein, we have developed a dehalogenative deuteration strategy using piezoelectric materials as catalysts in a solid-phase system under ball-milling conditions. This non-spontaneous reaction is induced by mechanical force. D2O can serve as both a deuterium source and an electron donor in the transformation, eliminating the need for additional stoichiometric exogenous reductants. A series of (hetero)aryl iodides can be transformed into deuterated products with high deuterium incorporation. This method not only effectively overcomes existing synthetic challenges but can also be used for deuterium labelling of drug molecules and derivatives. Bioactivity experiments with deuterated drug molecule suggest that the D-ipriflavone enhances the inhibitory effects on osteoclast differentiation of BMDMs in vitro.

Mechanochemical synthesis of aromatic ketones: pyrylium tetrafluoroborate mediated deaminative arylation of amides

A new method has been introduced that is able to tackle the complexities of N-C(O) activation in amide moieties through utilization of pyrylium tetrafluoroborate in a mechanochemical setting, where amide bonds undergo activation and subsequent conversion to biaryl ketones. Due to the employment of a mechanochemical setting, the reaction conforms to green chemistry principles, offering an environmentally friendly approach to traditional amide derivatization techniques that rely on transition metals to achieve further functionalization.

Critical learning from industrial catalysis for nanocatalytic medicine

Systematical and critical learning from industrial catalysis will bring inspiration for emerging nanocatalytic medicine, but the relevant knowledge is quite limited so far. In this review, we briefly summarize representative catalytic reactions and corresponding catalysts in industry, and then distinguish the similarities and differences in catalytic reactions between industrial and medical applications in support of critical learning, deep understanding, and rational designing of appropriate catalysts and catalytic reactions for various medical applications. Finally, we summarize/outlook the present and potential translation from industrial catalysis to nanocatalytic medicine. This review is expected to display a clear picture of nanocatalytic medicine evolution.

Contact-electro-catalysis (CEC)

Contact-electro-catalysis (CEC) is an emerging field that utilizes electron transfer occurring at the liquid-solid and even liquid-liquid interfaces because of the contact-electrification effect to stimulate redox reactions. The energy source of CEC is external mechanical stimuli, and solids to be used are generally organic as well as in-organic materials even though they are chemically inert. CEC has rapidly garnered extensive attention and demonstrated its potential for both mechanistic research and practical applications of mechanocatalysis. This review aims to elucidate the fundamental principle, prominent features, and applications of CEC by compiling and analyzing the recent developments. In detail, the theoretical foundation for CEC, the methods for improving CEC, and the unique advantages of CEC have been discussed. Furthermore, we outline a roadmap for future research and development of CEC. We hope that this review will stimulate extensive studies in the chemistry community for investigating the CEC, a catalytic process in nature.

Unexpected Emergence of Carbon-Centered Radicals from Piezoelectric Effect in Oleic Acid-Capped BaTiO3

The utilization of alkyl radicals (•R) for hypoxic tumor therapy has great prospects due to its O2-independence and high reactivity. However, correlational initiators for in vivo activation remain scarce. Here, we report that ultrasound excitation of oleic acid-capped BaTiO3 (OA@BaTiO3) can result in an •R cascade and hence a means to conquer hypoxic tumors. Mechanistic studies find that the •R signal disappears when OA@BaTiO3 undergoes acid washing post-treatment, which is a common procedure for removing the unwanted byproduct BaCO3. Combined with the infrared spectrum analysis, acid treatment was proven to weaken the peaks at 2840-2970 cm-1 characteristic of -CH2- and terminal -CH3 stretching vibration of OA. There is compelling evidence that high temperature thermal oxidation of OA involves the generation of •R. Thus, acid washing is considered to remove the loosely bound yet catalytically active OA. And piezoelectric BaTiO3, a potential electron-hole redox catalyst, can sensitize these OA molecules and disintegrate them to •R. This unexpected discovery provides us with a distinctive mentality to seek diverse •R initiators for tumor ablation, as well as an additional perspective on the postprocessing of synthetic materials.

A contact-electro-catalysis process for producing reactive oxygen species by ball milling of triboelectric materials

Ball milling is a representative mechanochemical strategy that uses the mechanical agitation-induced effects, defects, or extreme conditions to activate substrates. Here, we demonstrate that ball grinding could bring about contact-electro-catalysis (CEC) by using inert and conventional triboelectric materials. Exemplified by a liquid-assisted-grinding setup involving polytetrafluoroethylene (PTFE), reactive oxygen species (ROS) are produced, despite PTFE being generally considered as catalytically inert. The formation of ROS occurs with various polymers, such as polydimethylsiloxane (PDMS) and polypropylene (PP), and the amount of generated ROS aligns well with the polymers' contact-electrification abilities. It is suggested that mechanical collision not only maximizes the overlap in electron wave functions across the interface, but also excites phonons that provide the energy for electron transition. We expect the utilization of triboelectric materials and their derived CEC could lead to a field of ball milling-assisted mechanochemistry using any universal triboelectric materials under mild conditions.

Mechanochemical Synthesis of Aryl Fluorides by Using Ball Milling and a Piezoelectric Material as the Redox Catalyst

Aryl fluorides are important structural motifs in many pharmaceuticals. Although the Balz-Schiemann reaction provides an entry to aryl fluorides from aryldiazonium tetrafluoroborates, it suffers from drawbacks such as long reaction time, high temperature, toxic solvent, toxic gas release, and low functional group tolerance. Here, we describe a general method for the synthesis of aryl fluorides from aryldiazonium tetrafluoroborates using a piezoelectric material as redox catalyst under ball milling conditions in the presence of Selectfluor. This approach effectively addresses the aforementioned limitations. Furthermore, the piezoelectric material can be recycled multiple times. Mechanistic investigations indicate that this fluorination reaction may proceed via a radical pathway, and Selectfluor plays a dual role as both a source of fluorine and a terminal reductant.

Defect Engineered Microcrystalline Cellulose for Enhanced Cocatalyst-Free Piezo-Catalytic H2 Production

Mechanical energy driven piezocatalytic hydrogen (H2 ) production is a promising way to solve the energy crisis . But limited by the slow separation and transfer efficiency of piezoelectric charges generated on the surface of piezocatalysts , the piezocatalytic performance is still not satisfactory. Here, defect engineering is first used to optimize the piezocatalytic performance of microcrystalline cellulose (MCC). The piezocatalytic H2 production rate of MCC with the optimal defect concentration can reach up to 84.47 µmol g-1 h-1 under ultrasonic vibration without any co-catalyst, which is ≈3.74 times higher than that of the pure MCC (22.65 µmol g-1 h-1 ). The enhanced H2 production rate by piezoelectric catalysis is mainly due to the introduction of defect engineering on MCC, which disorders the symmetry of MCC crystal structure, improves the electrical conductivity of the material, and accelerates the separation and transfer efficiency of piezoelectric charges. Moreover, the piezocatalytic H2 production rate of MCC with the optimal defect concentration can still reach up to 93.61 µmol g-1 h-1 in natural seawater, showingits commendable practicability. This study presents a novel view for designing marvelous-performance biomass piezocatalysts through defect engineering, which can efficiently convert mechanical energy into chemical energy .

The effect of high-frequency acoustic wave vibration pattern on HKUST's multi-level pore structure

The physical properties of materials are critical to their functionality, and the ability to control these properties using external forces is a significant challenge. In this study, we investigate the effect of three high frequency acoustic wave vibration patterns on the structure and morphology of MOF particles. Our results indicate that while regular vibration patterns generated by SAW can alter particle morphology, hybrid waves and Lamb waves with irregular vibration patterns can synthesise MOF crystals with multi-level pores. The vibration pattern of acoustic waves is shown to be a critical factor in controlling the particle morphology process. These results provide new insights into the precise control of crystal structure and the theory of crystallisation by particle attachment (CPA).

Emerging Advancements in Piezoelectric Nanomaterials for Dynamic Tumor Therapy

Cancer is one of the deadliest diseases, having spurred researchers to explore effective therapeutic strategies for several centuries. Although efficacious, conventional chemotherapy usually introduces various side effects, such as cytotoxicity or multi−drug resistance. In recent decades, nanomaterials, possessing unique physical and chemical properties, have been used for the treatment of a wide range of cancers. Dynamic therapies, which can kill target cells using reactive oxygen species (ROS), are promising for tumor treatment, as they overcome the drawbacks of chemotherapy methods. Piezoelectric nanomaterials, featuring a unique property to convert ultrasound vibration energy into electrical energy, have also attracted increasing attention in biomedical research, as the piezoelectric effect can drive chemical reactions to generate ROS, leading to the newly emerging technique of ultrasound−driven tumor therapy. Piezoelectric materials are expected to bring a better solution for efficient and safe cancer treatment, as well as patient pain relief. In this review article, we highlight the most recent achievements of piezoelectric biomaterials for tumor therapy, including the mechanism of piezoelectric catalysis, conventional piezoelectric materials, modified piezoelectric materials and multifunctional piezoelectric materials for tumor treatment.

Piezocatalytic Techniques in Environmental Remediation

As a consequence of rapid industrialization throughout the world, various environmental pollutants have begun to accumulate in water, air, and soil. This endangers the ecological environment of the earth, and environmental remediation has become an immediate priority. Among various environmental remediation techniques, piezocatalytic techniques, which uniquely take advantage of the piezoelectric effect, have attracted much attention. Piezoelectric effects allow pollutant degradation directly, while also enhancing photocatalysis by reducing the recombination of photogenerated carriers. In this Review, we provide a comprehensive summary of recent developments in piezocatalytic techniques for environmental remediation. The origin of the piezoelectric effect as well as classification of piezoelectric materials and their application in environmental remediation are systematically summarized. We also analyze the potential underlying mechanisms. Finally, urgent problems and the future development of piezocatalytic techniques are discussed.

Mechanically Driven Atom Transfer Radical Polymerization by Piezoelectricity

Targeting sustainable and eco-friendly polymer synthesis, we demonstrate here a synergistically catalyzed atom transfer radical polymerization (ATRP) induced and controlled by interplay between ball milling (BM) and piezoelectric nanoparticles (piezoNPs). BM-induced electron transfer can be achieved through piezoNPs deformation under impact force, serving as an external stimulus to mediate polymerization. The ppm level of copper loading is sufficient in fabrication of a polymer with well-defined molecular weight and low polydispersity. High-molecular-weight polymers ranging from 33 to 74 kDa were prepared successfully through DMSO-assisted grinding. Besides, its good performance on availability of water as liquid-assisted grinding additive, the recyclability of piezoNPs, and the formation of cross-linker-free composite resin make our ATRP approach a green and practical option alongside the existent heat-, electro-, and photo-induced methods.

Mechanoredox Catalysis Enables a Sustainable and Versatile Reversible Addition-Fragmentation Chain Transfer Polymerization Process

The sustainable synthesis of macromolecules with control over sequence and molar mass remains a challenge in polymer chemistry. By coupling mechanochemistry and electron-transfer processes (i.e., mechanoredox catalysis), an energy-conscious controlled radical polymerization methodology is realized. This work explores an efficient mechanoredox reversible addition-fragmentation chain transfer (RAFT) polymerization process using mechanical stimuli by implementing piezoelectric barium titanate and a diaryliodonium initiator with minimal solvent usage. This mechanoredox RAFT process demonstrates exquisite control over poly(meth)acrylate dispersity and chain length while also showcasing an alternative to the solution-state synthesis of semifluorinated polymers that typically utilize exotic solvents and/or reagents. This chemistry will find utility in the sustainable development of materials across the energy, biomedical, and engineering communities.

Engineering the Defects and Microstructures in Ferroelectrics for Enhanced/Novel Properties: An Emerging Way to Cope with Energy Crisis and Environmental Pollution

In the past century, ferroelectrics are well known in electroceramics and microelectronics for their unique ferroelectric, piezoelectric, pyroelectric, and photovoltaic effects. Nowadays, the advances in understanding and tuning of these properties have greatly promoted a broader application potential especially in energy and environmental fields, by harvesting solar, mechanical, and heat energies. For example, high piezoelectricity and high pyroelectricity can be designed by defect or microstructure engineering for piezo- and pyro-catalyst, respectively. Moreover, highly piezoelectric and broadband (UV-Vis-NIR) light-responsive ferroelectrics can be designed via defect engineering, giving rise to a new concept of photoferroelectrics for efficient photocatalysis, piezocatalysis, pyrocatalysis, and related cocatalysis. This article first summarizes the recent developments in ferroelectrics in terms of piezoelectricity, pyroelectricity, and photovoltaic effects based on defect and microstructure engineering. Then, the potential applications in energy generation (i.e., photovoltaic effect, H2 generation, and self-powered multisource energy harvesting and signal sensing) and environmental protection (i.e., photo-piezo-pyro- cocatalytic dye degradation and CO2 reduction) are reviewed. Finally, the outlook and challenges are discussed. This article not only covers an overview of the state-of-art advances of ferroelectrics, but also prospects their applications in coping with energy crisis and environmental pollution.

Combining Solid-State Shear Milling and FFF 3D-Printing Strategy to Fabricate High-Performance Biomimetic Wearable Fish-Scale PVDF-Based Piezoelectric Energy Harvesters

High-performance flexible piezoelectric polymer-ceramic composites are in high demand for increasing wearable energy-harvesting applications. In this work, a strategy combining solid-state shear milling (S³M) and fused filament fabrication (FFF) 3D-printing technology is proposed for the fabrication of high-performance biomimetic wearable piezoelectric poly(vinylidene fluoride) (PVDF)/tetraphenylphosphonium chloride (TPPC)/barium titanate (BaTiO₃) nanocomposite energy harvesters with a biomimetic fish-scale-like metamaterial. The S³M technology could greatly improve the dispersion of BaTiO₃ sub-micrometer particles and the interfacial compatibility, resulting in better processability and piezoelectric performance of the nanocomposites. Typically, the FFF 3D printed energy harvester incorporating 30 wt % BaTiO₃ showed the highest piezoelectric outputs with an open-circuit voltage of 11.5 V and a short-circuit current of 220 nA. It could hence drive nine green LEDs to work normally. In addition, a 3D-printed biomimetic wearable energy harvester inspired by an environmentally adaptive fish-scale-like metamaterial was further fabricated. The fish-scale-like energy harvester could harvest energy through different deformation motions and successfully recharge a 4.7 μF capacitor by being mounted on a bicycle tire and the tire's rolling. This work not only provides a 3D printing strategy for designing diversified and complex geometric structures but also paves the way for further applications in flexible, wearable, self-powered electromechanical energy harvesters.

Contact-electro-catalysis for the degradation of organic pollutants using pristine dielectric powders

Mechanochemistry has been studied for some time, but research on the reactivity of charges exchanged by contact-electrification (CE) during mechanical stimulation remains scarce. Here, we demonstrate that electrons transferred during the CE between pristine dielectric powders and water can be utilized to directly catalyze reactions without the use of conventional catalysts. Specifically, frequent CE at Fluorinated Ethylene Propylene (FEP) - water interface induces electron-exchanges, thus forming reactive oxygen species for the degradation of an aqueous methyl orange solution. Contact-electro-catalysis, by conjunction of CE, mechanochemistry and catalysis, has been proposed as a general mechanism, which has been demonstrated to be effective for various dielectric materials, such as Teflon, Nylon-6,6 and rubber. This original catalytic principle not only expands the range of catalytic materials, but also enables us to envisage catalytic processes through mechano-induced contact-electrification.

High intensity focused ultrasound responsive release behavior of metallo-supramolecular block PPG-PEG copolymer micelles

An amphiphilic metallo-supramolecular poly(propylene glycol)-block-poly(ethylene glycol) block copolymer containing a bis(2,2':6',2″-terpyridine) ruthenium (II) complex as a supramolecular connection between the two constituting blocks was used to prepare stable aqueous micelles which displayed a high intensity focused ultrasound (HIFU) triggered release behavior. By adjusting the HIFU time and intensity, the novel modality of HIFU triggered release allows for fine-tuning of the release kinetics of the encapsulants from the micelles in a remote and controlled way. Nuclear magnetic resonance spectroscopy, ultraviolet spectroscopy, and matrix-assisted laser desorption/ionization-time of flight mass spectrometry confirmed that the degradation of the micelles was due to the cleavage of the ether bond connected to the pyridine ring. This well controlled HIFU-copolymer micelle drug delivery system has considerable potential in targeted therapy.

Electric-Field Mediated Chemistry: Uncovering and Exploiting the Potential of (Oriented) Electric Fields to Exert Chemical Catalysis and Reaction Control

This Perspective discusses oriented external-electric-fields (OEEF), and other electric-field types, as "smart reagents", which enable in principle control over wide-ranging aspects of reactivity and structure. We discuss the potential of OEEFs to control nonredox reactions and impart rate-enhancement and selectivity. An OEEF along the "reaction axis", which is the direction whereby electronic reorganization converts reactants' to products' bonding, will accelerate reactions, control regioselectivity, induce spin-state selectivity, and elicit mechanistic crossovers. Simply flipping the direction of the OEEF will lead to inhibition. Orienting the OEEF off the reaction axis enables control over stereoselectivity, enantioselectivity, and product selectivity. For polar/polarizable reactants, the OEEF itself will act as tweezers, which orient the reactants and drive their reaction. OEEFs also affect bond-dissociation energies and dissociation modes (covalent vs ionic), as well as alteration of molecular geometries and supramolecular aggregation. The "key" to gaining access to this toolbox provided by OEEFs is microscopic control over the alignment between the molecule and the applied field. We discuss the elegant experimental methods which have been used to verify the theoretical predictions and describe various alternative EEF sources and prospects for upscaling OEEF catalysis in solvents. We also demonstrate the numerous ways in which the OEEF effects can be mimicked by use of (designed) local-electric fields (LEFs), i.e., by embedding charges or dipoles into molecules. LEFs and OEEFs are shown to be equivalent and to obey the same ground rules. Outcomes are exemplified for Diels-Alder cycloadditions, oxidative addition of bonds by transition-metal complexes, H-abstractions by oxo-metal species, ionic cleavage of halogen bonds, methane activation, etc.