In situ photocatalytically enhanced thermogalvanic cells for electricity and hydrogen production

MXene Hollow Microsphere-Boosted Nanocomposite Electrodes for Thermocells with Enhanced Thermal Energy Harvesting Capability

Thermal energy, constantly being produced in natural and industrial processes, constitutes a significant portion of energy lost through various inefficiencies. Employing the thermogalvanic effect, thermocells (TECs) can directly convert thermal energy into electricity, representing a promising energy-conversion technology for efficient, low-grade heat harvesting. However, the use of high-cost platinum electrodes in TECs has severely limited their widespread adoption, highlighting the need for more cost-effective alternatives that maintain comparable thermoelectrochemical performance. In this study, a nanocomposite electrode featuring Ti3C2Tx with hollow microsphere structures is rationally designed. This design addresses the restacking issue inherent in MXene nanosheets, increases the electrochemically active surface area, and modifies the original MXene surfaces with oxygen terminations, leading to improved redox kinetics at the electrode-electrolyte interface, particularly in n-type TECs employing Fe2+/3+ redox ions. The optimized n-type TEC achieved an output power of 84.55 μW cm-2 and a normalized power density of 0.53 mW m-2 K-2 under a ΔT of 40 K, outperforming noble platinum-based TECs by a factor of 5.5. An integrated device consisting of 32 TEC units with a p-n connection is also fabricated, which can be successfully utilized to power various small electronics. These results demonstrate the potential of MXene-based composite electrodes to revolutionize TEC technology by offering a cost-effective, high-performance alternative to traditional noble metal electrodes and contributing to efficient low-grade heat harvesting.

Unlocking new possibilities in ionic thermoelectric materials: a machine learning perspective

The high thermopower of ionic thermoelectric (i-TE) materials holds promise for miniaturized waste-heat recovery devices and thermal sensors. However, progress is hampered by laborious trial-and-error experimentations, which lack theoretical underpinning. Herein, by introducing the simplified molecular-input line-entry system, we have addressed the challenge posed by the inconsistency of i-TE material types, and present a machine learning model that evaluates the Seebeck coefficient with an R 2 of 0.98 on the test dataset. Using this tool, we experimentally identify a waterborne polyurethane/potassium iodide ionogel with a Seebeck coefficient of 41.39 mV/K. Furthermore, interpretable analysis reveals that the number of rotatable bonds and the octanol-water partition coefficient of ions negatively affect Seebeck coefficients, which is corroborated by molecular dynamics simulations. This machine learning-assisted framework represents a pioneering effort in the i-TE field, offering significant promise for accelerating the discovery and development of high-performance i-TE materials.

Flexible Hybrid Membrane with Synergistic Exciton Dynamics for Excessive 280 h of Durably Piezo-Photocatalytic H2O-to-H2 Conversion

Solar-driven H2O-to-H2 conversion is a feasible artificial photoconversion technology for clean energy production. However, low photon utilization efficiency has become a major obstacle limiting the practical application of this technology. Herein, a metal atomic replacement (Sb→Ni) is conducted to disintegrate bulk Sb2S3 nanorods and synchronously grow the NiS nanolayers, and a flower-like Sb2S3-NiS nanocomposite with high BET specific surface area and synergistic exciton dynamics is constructed for simulated solar (SSL)-driven H2O-to-H2 conversion. The optimal Sb2S3-NiS nanocomposite is compounded with polyvinylidene fluoride (PVDF) to prepare a flexible PVDF/Sb2S3-NiS (PSN) hybrid membrane with stable structure and excellent recyclability via an electrospinning method. Due to the synergistically interacted organic-inorganic interface and high porosity, it is conducive to the exposure of effective active sites, exciton conduction and mass transfer and exchange, thereby an outstanding alkaline (Ph = 13.0) H2O-to-H2 conversion activity with a 0.06% of solar-to-hydrogen efficiency and over 280 h (70 cycles) of durable recycling is achieved under the collaborative drives of SSL and weak ultrasound (40 Hz). This study raises a state-of-the-art membrane material for solar-driven panel reaction technology.

Thermoelectric Materials and Devices for Advanced Biomedical Applications

Thermoelectrics (TEs), enabling the direct conversion between heat and electrical energy, have demonstrated extensive application potential in biomedical fields. Herein, the mechanism of the TE effect, recent developments in TE materials, and the biocompatibility assessment of TE materials are provided. In addition to the fundamentals of TEs, a timely and comprehensive review of the recent progress of advanced TE materials and their applications is presented, including wearable power generation, personal thermal management, and biosensing. In addition, the new-emerged medical applications of TE materials in wound healing, disease treatment, antimicrobial therapy, and anti-cancer therapy are thoroughly reviewed. Finally, the main challenges and future possibilities are outlined for TEs in biomedical fields, as well as their material selection criteria for specific application scenarios. Together, these advancements can provide innovative insights into the development of TEs for broader applications in biomedical fields.

Hermetic hydrovoltaic cell sustained by internal water circulation

Numerous efforts have been devoted to harvesting sustainable energy from environment. Among the promising renewable resources, ambient heat exhibits attractive prospects due to its ubiquity and inexhaustibility, and has been converted into electricity through water evaporation-induced hydrovoltaic approaches. However, current hydrovoltaic approaches function only in low-humidity environments and continuously consume water. Herein, we fabricate a hermetic hydrovoltaic cell (HHC) to harvest ambient heat, and have fully addressed the limitations posed by environmental conditions. Meanwhile, for the first time we develop an internal circulation hydrovoltaic mechanism. Taking advantage of the heterogeneous wicking bilayer structure, we verify that inside the hermetic cell, the ambient temperature fluctuation-induced evaporation and further the water circulation can persist, which sustains the hydrovoltaic effect to convert ambient heat into electricity. More importantly, the hermetic design enables the cell to work continuously and reliably for 160 h with negligible water consumption, unaffected by external influences such as wind and light, making it an excellent candidate for extreme situations such as water-scarce deserts, highly humid tropical rain forests, rainy days, and dark underground engineering. These findings provide an easily accessible and widely applicable route for stably harnessing renewable energy, and more notably, offer a novel paradigm toward leveraging low-grade ambient heat energy via circulation design.

The development and impact of tin selenide on thermoelectrics

Thermoelectric technology experienced rapid development over the past 20 years, with the most promising applications being in both power generation and active cooling. Among existing thermoelectrics, tin selenide (SnSe) has had particularly rapid development owing to the unexpectedly high thermoelectric efficiency that has been continuously established over the past decade. Several transport mechanisms and strategies used to interpret and improve the thermoelectric performance of SnSe have been important for understanding and developing other material systems with SnSe-like characteristics. Similar to other thermoelectrics, building commercially viable SnSe-based devices requires advances in device efficiency and service stability. Further optimization across all material systems should enable thermoelectric technology to play a critical role in the future global energy landscape.

Redox-mediated decoupled seawater direct splitting for H2 production

Seawater direct electrolysis (SDE) using renewable energy provides a sustainable pathway to harness abundant oceanic hydrogen resources. However, the side-reaction of the chlorine electro-oxidation reaction (ClOR) severely decreased direct electrolysis efficiency of seawater and gradually corrodes the anode. In this study, a redox-mediated strategy is introduced to suppress the ClOR, and a decoupled seawater direct electrolysis (DSDE) system incorporating a separate O2 evolution reactor is established. Ferricyanide/ferrocyanide ([Fe(CN)6]3-/4-) serves as an electron-mediator between the cell and the reactor, thereby enabling a more dynamically favorable half-reaction to supplant the traditional oxygen evolution reaction (OER). This alteration involves a straightforward, single-electron-transfer anodic reaction without gas precipitation and effectively eliminates the generation of chlorine-containing byproducts. By operating at low voltages (~1.37 V at 10 mA cm-2 and ~1.57 V at 100 mA cm-2) and maintaining stability even in a Cl--saturated seawater electrolyte, this system has the potential of undergoing decoupled seawater electrolysis with zero chlorine emissions. Further improvements in the high-performance redox-mediators and catalysts can provide enhanced cost-effectiveness and sustainability of the DSDE system.

High power density redox-mediated Shewanella microbial flow fuel cells

Microbial fuel cells utilize exoelectrogenic microorganisms to directly convert organic matter into electricity, offering a compelling approach for simultaneous power generation and wastewater treatment. However, conventional microbial fuel cells typically require thick biofilms for sufficient metabolic electron production rate, which inevitably compromises mass and charge transport, posing a fundamental tradeoff that limits the achievable power density (<1 mW cm-2). Herein, we report a concept for redox-mediated microbial flow fuel cells that utilizes artificial redox mediators in a flowing medium to efficiently transfer metabolic electrons from planktonic bacteria to electrodes. This approach effectively overcomes mass and charge transport limitations, substantially reducing internal resistance. The biofilm-free microbial flow fuel cell thus breaks the inherent tradeoff in dense biofilms, resulting in a maximum current density surpassing 40 mA cm-2 and a highest power density exceeding 10 mW cm-2, approximately one order of magnitude higher than those of state-of-the-art microbial fuel cells.

Self-Assembly Regulated Photocatalysis of Porphyrin-TiO2 Nanocomposites

Photoactive artificial nanocatalysts that mimic natural photoenergy systems can yield clean and renewable energy. However, their poor photoabsorption capability and disfavored photogenic electron-hole recombination hinder their production. Herein, we designed two nanocatalysts with various microstructures by combining the tailored self-assembly of the meso-tetra(p-hydroxyphenyl) porphine photosensitizer with the growth of titanium dioxide (TiO2). The porphyrin photoabsorption antenna efficiently extended the absorption range of TiO2 in the visible region, while anatase TiO2 promoted the efficient electron-hole separation of porphyrin. The photo-induced electrons were transferred to the surface of the Pt co-catalyst for the generation of hydrogen via water splitting, and the hole was utilized for the decomposition of methyl orange dye. The hybrid structure showed greatly increased photocatalytic performance compared to the core@shell structure due to massive active sites and increased photo-generated electron output. This controlled assembly regulation provides a new approach for the fabrication of advanced, structure-dependent photocatalysts.

Ultrastrong, flexible thermogalvanic armor with a Carnot-relative efficiency over 8

Body heat, a clean and ubiquitous energy source, is promising as a renewable resource to supply wearable electronics. Emerging tough thermogalvanic device could be a sustainable platform to convert body heat energy into electricity for powering wearable electronics if its Carnot-relative efficiency (ηr) reaches ~5%. However, maximizing both the ηr and mechanical strength of the device are mutually exclusive. Here, we develop a rational strategy to construct a flexible thermogalvanic armor (FTGA) with a ηr over 8% near room temperature, yet preserving mechanical robustness. The key to our design lies in simultaneously realizing the thermosensitive-crystallization and salting-out effect in the elaborately designed ion-transport highway to boost ηr and improve mechanical strength. The FTGA achieves an ultrahigh ηr of 8.53%, coupling with impressive mechanical toughness of 70.65 MJ m-3 and substantial elongation (~900%) together. Our strategy holds sustainable potential for harvesting body heat and powering wearable electronics without recharging.

Giant Iontronic Flexoelectricity in Soft Hydrogels Induced by Tunable Biomimetic Ion Polarization

Flexoelectricity features the strain gradient-induced mechanoelectric conversion using materials not limited by their crystalline symmetry, but state-of-the-art flexoelectric materials exhibit very small flexoelectric coefficients and are too brittle to withstand large deformations. Here, inspired by the ion polarization in living organisms, this paper reports the giant iontronic flexoelectricity of soft hydrogels where the ion polarization is attributed to the different transfer rates of cations and anions under bending deformations. The flexoelectricity is found to be easily regulated by the types of anion-cation pairs and polymer networks in the hydrogel. A polyacrylamide hydrogel with 1 m NaCl achieves a record-high flexoelectric coefficient of ≈1160 µC m-1, which can even be improved to ≈2340 µC m-1 by synergizing with the effects of ion pairs and extra polycation chains. Furthermore, the hydrogel as flexoelectric materials can withstand larger bending deformations to obtain higher polarization charges owing to its intrinsic low modulus and high elasticity. A soft flexoelectric sensor is then demonstrated for object recognition by robotic hands. The findings greatly broaden the flexoelectricity to soft, biomimetic, and biocompatible materials and applications.

Recurrently gellable and thermochromic inorganic hydrogel thermogalvanic cells

Thermogalvanic cells (TGCs) draw great attention in the field of heat to electricity conversion, but TGCs were only in the form of liquid or organic gel. Here, we report an all-inorganic hydrogel TGC via simply mixing and stirring two inorganic salt solutions. Benefiting from the hydrogen bonds resultant framework and endogenous Fe2+/3+ redox couple, the TGC can recurrently pulverize-gel with completely holding its initial thermogalvanic performances after even 60 cycles. As the temperature and pH coregulating Fe3+ concentration and reversible transformation between Fe3+ and Fe(OH)3, we boost thermopower and realize thermochromism. This work provides a different perspective for TGCs and offers an avenue for future hydrogel materials research.

Double S-scheme Cu2-xSe/twinned-Cd0.5Zn0.5S homo-heterojunctions with surface plasmon effects for efficient photocatalytic H2 evolution

The enhancement of charge separation and utilization efficiency in both the bulk phase and interface of semiconductor photocatalysts, as well as the expansion of light absorption range, are crucial research topics in the field of photocatalysis. To address this issue, twinned Cd0.5Zn0.5S (T-CZS) homojunctions consisting of wurtzite Cd0.5Zn0.5S (WZ-CZS) and zinc blende Cd0.5Zn0.5S (ZB-CZS) were synthesized via a hydrothermal method to facilitate the bulk-phase charge separation. Meanwhile, Cu2-xSe with localized surface plasmon resonance effect (LSPR) generated by Cu vacancies was also obtained through a hydrothermal process. Due to their opposite electronegativity, a solvent evaporation strategy was employed to combine Cu2-xSe and T-CZS by intermolecular electrostatic. After optimization, the photocatalytic hydrogen (H2) evolution rate of 5 wt% Cu2-xSe/T-CZS reached an impressive value of 60 mmol∙h-1∙g-1, which was 4.6 and 66.6 times higher than that of pure Cu2-xSe and T-CZS, respectively. Furthermore, this composites demonstrated a remarkable rate of 0.46 mmol∙h-1∙g-1 under near-infrared (NIR) wavelength (>800 nm). The enhanced performance observed in Cu2-xSe/T-CZS can be attributed to its unique and efficient double S-scheme charge transfer mechanism which effectively suppresses rapid recombination of electron-hole pairs both within the bulk phase and at the surface interfaces; this conclusion is supported by Density Functional Theory (DFT) calculations as well as electron paramagnetic resonance spectroscopy analysis. Moreover, incorporation of Cu2-xSe enables effective utilization ultraviolet visible-near infrared (UV-Vis-NIR) light by the composites while facilitating injection "hot electrons" into T-CZS for promoting photocatalytic reactions. This study provides a potential strategy for achieving efficient solar energy conversion through synergistic integration of non-stoichiometric plasmonic materials with photocatalysts with twinned-twinned structures.

Synergistic Anisotropic Network and Hierarchical Electrodes Endow Cost-Effective N-Type Quasi-Solid State Thermocell with Boosted Electricity Production

Quasi-solid state thermocells hold immense potential for harnessing untapped low-grade heat and converting it into electricity via the thermogalvanic effect. However, integrated N-type thermocells face limitations in thermoelectric performance due to the rare N-type systems and the poor electroactivity of the electrode interfaces. Herein, a low-cost, high-power N-type quasi-solid state thermocell employing PVA-CuSO4-Cu is presented, which is enhanced by synergistic engineering of an anisotropic network and hierarchical electrodes. The anisotropic polymer network, combined with the salting-out effect, yields impressive mechanical properties that exceed those of most N-type quasi-solid state thermocells. Furthermore, through the synergistic construction of aligned ion transport pathways in the anisotropic thermocell and optimization of the electroactive interface between electrodes and thermocell, a remarkable enhancement of 1500% in output power density (compared to pristine thermocell), reaching 0.51 mW m-2 at ∆T = 5 °C. It is believed that this cost-effective N-type thermocell, enhanced by the synergistic anisotropic network and hierarchical electrodes, paves the way for effective energy harvesting from diverse heat sources and promises to reshape sustainable energy utilization.

Chaotropic Effect-Boosted Thermogalvanic Ionogel Thermocells for All-Weather Power Generation

Ionic thermocells convert heat into electricity and are promising power sources for electronic devices. However, discontinuous and small electricity output limits practical use under varying environmental conditions. Here, a thermogalvanic ionogel with a high Seebeck coefficient (32.4 mV K-1) is designed. Thermocells that combine thermogalvanic ionogel-based thermocells, which realize all-weather power generation via passive radiative cooling, are also developed. These thermocells generate electricity continuously under varying weather conditions and over a wide temperature range (-40 to 90 °C), with a normalized power density of 25.84 mW m-2 K-2. Advanced characterization shows that the chaotropic effect enhances the Seebeck coefficient, while the self-supplying temperature difference given the radiative cooling structure enables all-weather power generation. These results provide an effective strategy for developing practical thermocells suitable for diverse daily and seasonal variations.

Thermoelectrocatalysis: an emerging strategy for converting waste heat into chemical energy

This perspective defines and explores an innovative waste heat harvesting strategy, thermoelectrocatalysis (TECatal), emphasizing materials design and potential applications in clean energy, environmental, and biomedical technologies.

Catalyzing Artificial Photosynthesis with TiO2 Heterostructures and Hybrids: Emerging Trends in a Classical yet Contemporary Photocatalyst

Titanium dioxide (TiO2) stands out as a versatile transition-metal oxide with applications ranging from energy conversion/storage and environmental remediation to sensors and optoelectronics. While extensively researched for these emerging applications, TiO2 has also achieved commercial success in various fields including paints, inks, pharmaceuticals, food additives, and advanced medicine. Thanks to the tunability of their structural, morphological, optical, and electronic characteristics, TiO2 nanomaterials are among the most researched engineering materials. Besides these inherent advantages, the low cost, low toxicity, and biocompatibility of TiO2 nanomaterials position them as a sustainable choice of functional materials for energy conversion. Although TiO2 is a classical photocatalyst well-known for its structural stability and high surface activity, TiO2-based photocatalysis is still an active area of research particularly in the context of catalyzing artificial photosynthesis. This review provides a comprehensive overview of the latest developments and emerging trends in TiO2 heterostructures and hybrids for artificial photosynthesis. It begins by discussing the common synthesis methods for TiO2 nanomaterials, including hydrothermal synthesis and sol-gel synthesis. It then delves into TiO2 nanomaterials and their photocatalytic mechanisms, highlighting the key advancements that have been made in recent years. The strategies to enhance the photocatalytic efficiency of TiO2, including surface modification, doping modulation, heterojunction construction, and synergy of composite materials, with a specific emphasis on their applications in artificial photosynthesis, are discussed. TiO2-based heterostructures and hybrids present exciting opportunities for catalyzing solar fuel production, organic degradation, and CO2 reduction via artificial photosynthesis. This review offers an overview of the latest trends and advancements, while also highlighting the ongoing challenges and prospects for future developments in this classical yet rapidly evolving field.

Highly Antifreezing Thermogalvanic Hydrogels for Human Heat Harvesting in Ultralow Temperature Environments

Thermogalvanic hydrogels have been quickly developed and are widely used in thermal energy harvesting. However, the freezing behaviors of thermogalvanic hydrogels at subzero temperatures greatly limit their practical applications. Herein, we design an antifreezing thermogalvanic hydrogel based on [Fe(CN)6]3-/4- ions for thermoelectric power generation in ultralow temperature environments. The antifreezing thermogalvanic hydrogels show excellent flexibility at -80 °C owing to the hydrogen bonding between ethylene glycol and water molecules. Even after 500 cyclic tensile strains, the thermogalvanic hydrogels can still maintain excellent mechanical stability, and the Seebeck coefficient is as high as 1.43 mV/K, corresponding to a large retention rate of ∼95%. Moreover, we demonstrate a wearable thermoelectric shoe based on antifreezing thermogalvanic hydrogels for harvesting human thermal energy in a simulated winter environment of -30 °C, and the electricity can drive a green LED. This work provides important guidance for the design and optimization of antifreezing thermogalvanic hydrogels.

Electrochemical waste-heat harvesting

A combined thermal and electrochemical device enhances voltage and hydrogen production.