Biopharmaceutical characterization of nebulized antimicrobial agents in rats: 1. Ciprofloxacin, moxifloxacin, and grepafloxacin

Biopharmaceutical profiling of anti-infective sanggenons from Morus alba root bark for inhalation administration

Mulberry Diels-Alder-type adducts (MDAAs), isolated from Morus alba root bark, exhibit dual activity against viral and bacterial pathogens but show sobering efficacy following oral administration. Inhalation administration may overcome issues with oral bioavailability and improve efficacy for the treatment of respiratory infections. To assess the suitability of MDAAs for inhalation administration, physicochemical (e.g. pH, pKa, logP, pH-dependent solubility) and biopharmaceutical (epithelial cytotoxicity, permeability, and uptake) properties of two bioactive MDAA stereoisomers sanggenon C (SGC) and sanggenon D (SGD) were evaluated as isolated natural compounds and within parent extracts (MA21, MA60). Despite their structural similarity, SGD exhibited a 10-fold higher solubility than SGC across pH 1.2-7.4, with slight increases at neutral pH. Both compounds were more soluble in isolated form than in the parent extracts. The more lipophilic SGC was found to be more cytotoxic when compared to SGD, indicating a better cellular penetration, which was confirmed by uptake studies. Nonetheless, SGC and SGD exhibited no measurable permeability across intact Calu-3 monolayers, highlighting their potential for increased lung retention and improved local anti-infective activity following inhalation administration. Results suggest that SGC and SGD in isolated form, rather than as extracts, are promising candidates for pulmonary drug delivery to treat lung infections.

Evaluating the effect of sodium alginate and sodium carboxymethylcellulose on pulmonary delivery of levofloxacin spray-dried microparticles

BACKGROUND

Patients with cystic fibrosis commonly suffer from lung infections caused by Pseudomonas aeruginosa. Recently, the Levofloxacin (LVF) nebulizing solution (Quinsair®) has been prescribed for the antimicrobial management. The sustained-release (SR) dry powder formulation of LVF is a convenient alternative to Quinsair®. It has the potential to enhance patient convenience and decrease the likelihood of drug resistance over time.

OBJECTIVE

In this paper, we set forth to formulate and evaluate the potential application of sodium alginate (SA) and sodium carboxymethylcellulose (SCMC) for sustained pulmonary delivery of LVF.

METHODS

The spray-dried (SD) LVF microparticles were formulated using SCMC and SA along with L-leucine (Leu). The microparticles were analyzed in terms of particle size, morphology, x-ray diffraction (XRD), in-vitro drug release, and aerodynamic properties. Selected formulations were further proceeded to short-term stability test.

RESULTS

The polymer-containing samples displayed process yield of 33.31%-39.67%, mean entrapment efficiency of 89% and volume size within the range of 2-5 μm. All the hydrogel microparticles were amorphous and exhibited rounded morphology with surface indentations. Formulations with a drug-to-excipient ratio of 50:50 and higher, showed a 24-h SR. The aerodynamic parameters were fine particle fraction and emitted dose percentage ranging between 46.21%-60.6% and 66.67%-87.75%, respectively. The short-term stability test revealed that the formulation with a 50:50 drug-to-excipient ratio, containing SA, demonstrated better physical stability.

CONCLUSION

The selected formulation containing SA has the potential to extend the release duration. However, further enhancements are required to optimize its performance.

PK-PD Evaluation of Inhaled Microparticles loaded with Ciprofloxacin-Copper complex in a Rat Model of Chronic Pseudomonas aeruginosa Lung Infection

The potential gain in efficacy of pulmonary administration over IV administration of some antibiotics such as ciprofloxacin (CIP) may be limited by the short residence time of the drug at the site of infection after nebulization. Complexation of CIP with copper reduced its apparent permeability in vitro through a Calu-3 cell monolayer and greatly increased its pulmonary residence time after aerosolisation in healthy rats. Chronic P. aeruginosa lung infections in cystic fibrosis patients result in airway and alveolar inflammation that may increase the permeability of inhaled antibiotics and alter their fate in the lung after inhalation compared to what was seen in healthy conditions. The objective of this study was to compare the pharmacokinetics and efficacy of CIP-Cu²⁺ complex-loaded microparticles administered by pulmonary route with a CIP solution administered by IV to model rats with chronic lung infection. After a single pulmonary administration of microparticles loaded with CIP-Cu²⁺ complex, pulmonary exposure to CIP was increased 2077-fold compared to IV administration of CIP solution. This single lung administration significantly reduced the lung burden of P. aeruginosa expressed as CFU/lung measured 24 h after administration by 10-fold while IV administration of the same dose of CIP was ineffective compared to the untreated control. This better efficacy of inhaled microparticles loaded with CIP-Cu²⁺ complex compared with CIP solution can be attributed to the higher pulmonary exposure to CIP obtained with inhaled CIP-Cu²⁺ complex-loaded microparticles than that obtained with IV solution.

In Vitro and In Vivo Evaluation of Inhalable Ciprofloxacin Sustained Release Formulations

Respiratory antibiotics delivery has been appreciated for its high local concentration at the infection sites. Certain formulation strategies are required to improve pulmonary drug exposure and to achieve effective antimicrobial activity, especially for highly permeable antibiotics. This study aimed to investigate lung exposure to various inhalable ciprofloxacin (CIP) formulations with different drug release rates in a rat model. Four formulations were prepared, i.e., CIP-loaded PLGA micro-particles (CHPM), CIP microcrystalline dry powder (CMDP), CIP nanocrystalline dry powder (CNDP), and CIP spray-dried powder (CHDP), which served as a reference. The physicochemical properties, drug dissolution rate, and aerosolization performance of these powders were characterized in vitro. Pharmacokinetic profiles were evaluated in rats. All formulations were suitable for inhalation (mass median aerodynamic diameter < 5 µm). CIP in CHPM and CHDP was amorphous, whereas the drug in CMDP and CNDP remained predominantly crystalline. CHDP exhibited the fastest drug release rate, while CMDP and CNDP exhibited much slower drug release. In addition, CMDP and CNDP exhibited significantly higher in vivo lung exposure to CIP compared with CHDP and CHPM. This study suggests that lung exposure to inhaled drugs with high permeability is governed by drug release rate, implying that lung exposure of inhaled antibiotics could be improved by a sustained-release formulation strategy.

Colistin-loaded aerosolizable particles for the treatment of bacterial respiratory infections

Compared to parenteral administration of colistin, its direct pulmonary administration can maximize lung drug deposition while reducing systemic adverse side effects and derived nephrotoxicity. Current pulmonary administration of colistin is carried out by the aerosolization of a prodrug, colistin methanesulfonate (CMS), which must be hydrolized to colistin in the lung to produce its bactericidal effect. However, this conversion is slow relative to the rate of absorption of CMS, and thus only 1.4 % (w/w) of the CMS dose is converted to colistin in the lungs of patients receiving inhaled CMS. We synthesized several aerosolizable nanoparticle carriers loaded with colistin using different techniques and selected particles with sufficient drug loading and adequate aerodynamic behavior to efficiently deliver colistin to the entire lung. Specifically, we carried out (i) the encapsulation of colistin by single emulsion-solvent evaporation with immiscible solvents using polylactic-co-glycolic (PLGA) nanoparticles; (ii) its encapsulation using nanoprecipitation with miscible solvents using poly(lactide-co-glycolide)-block-poly(ethylene glycol) as encapsulating matrix; (iii) colistin nanoprecipitation using the antisolvent precipitation method and its subsequent encapsulation within PLGA nanoparticles; and (iv) colistin encapsulation within PLGA-based microparticles using electrospraying. Nanoprecipitation of pure colistin using antisolvent precipitation showed the highest drug loading (55.0 ± 4.8 wt%) and spontaneously formed aggregates with adequate aerodynamic diameter (between 3 and 5 μm) to potentially reach the entire lung. These nanoparticles were able to completely eradicate Pseudomonas aeruginosa in an in vitro lung biofilm model at 10 µg/mL (MBC). This formulation could be a promising alternative for the treatment of pulmonary infections improving lung deposition and, therefore, the efficacy of aerosolized antibiotics.

Understanding the suitability of established antibiotics for oral inhalation from a pharmacokinetic perspective: an integrated model-based investigation based on rifampicin, ciprofloxacin and tigecycline in vivo data

BACKGROUND

Treating pulmonary infections by administering drugs via oral inhalation represents an attractive alternative to usual routes of administration. However, the local concentrations after inhalation are typically not known and the presumed benefits are derived from experiences with drugs specifically optimized for inhaled administration.

OBJECTIVES

A physiologically based pharmacokinetic/pharmacodynamic (PBPK/PD) model was developed to elucidate the pulmonary PK for ciprofloxacin, rifampicin and tigecycline and link it to bacterial PK/PD models. An exemplary sensitivity analysis was performed to potentially guide drug optimization regarding local efficacy for inhaled antibiotics.

METHODS

Detailed pulmonary tissue, endothelial lining fluid and systemic in vivo drug concentration-time profiles were simultaneously measured for all drugs in rats after intravenous infusion. Using this data, a PBPK/PD model was developed, translated to humans and adapted for inhalation. Simulations were performed comparing potential benefits of oral inhalation for treating bronchial infections, covering intracellular pathogens and bacteria residing in the bronchial epithelial lining fluid.

RESULTS

The PBPK/PD model was able to describe pulmonary PK in rats. Often applied optimization parameters for orally inhaled drugs (e.g. high systemic clearance and low oral bioavailability) showed little influence on efficacy and instead mainly increased pulmonary selectivity. Instead, low permeability, a high epithelial efflux ratio and a pronounced post-antibiotic effect represented the most impactful parameters to suggest a benefit of inhalation over systemic administration for locally acting antibiotics.

CONCLUSIONS

The present work might help to develop antibiotics for oral inhalation providing high pulmonary concentrations and fast onset of exposure coupled with lower systemic drug concentrations.

Developing ciprofloxacin dry powder for inhalation: A story of challenges and rational design in the treatment of cystic fibrosis lung infection

Cystic fibrosis (CF) is an inherited multisystem disease affecting the lung which leads to a progressive decline in lung function as a result of malfunctioning mucociliary clearance and subsequent chronic bacterial infections. Pseudomonas aeruginosa is the predominant cause of lung infection in CF patients and is associated with significant morbidity and mortality. Thus, antibiotic therapy remains the cornerstone of the treatment of CF. Pulmonary delivery of antibiotics for lung infections significantly reduces the required dose and the associated systemic side effects while improving therapeutic outcomes. Ciprofloxacin is one of the most widely used antibiotics against P. aeruginosa and the most effective fluoroquinolone. However, in spite of the substantial amount of research aimed at developing ciprofloxacin powder for inhalation, none of these formulations has been commercialized. Here, we present an integrated view of the diverse challenges associated with delivering ciprofloxacin dry particles to the lungs of CF patients and the rationales behind recent formulations of ciprofloxacin dry powder for inhalation. This review will discuss the challenges in developing ciprofloxacin powder for inhalation along with the physiological and pathophysiological challenges such as ciprofloxacin lung permeability, overproduction of viscous mucus and bacterial biofilms. The review will also discuss the current and emerging particle engineering approaches to overcoming these challenges. By doing so, we believe the review will help the reader to understand the current limitations in developing an inhalable ciprofloxacin powder and explore new opportunities of rational design strategies.

Possible Extraction of Drugs from Lung Tissue During Broncho-alveolar Lavage Suggest Uncertainty in the Procedure's Utility for Quantitative Assessment of Airway Drug Exposure

Following inhaled dosing, broncho-alveolar lavage (BAL) is often used for sampling epithelial lining fluid (ELF) to determine drug concentration in the lungs. This study aimed to explore the technique's suitability. Urea is typically used to estimate the dilution factor between the BAL fluid and physiological ELF, since it readily permeates through all fluids in the body. As representatives of permeable small molecule drugs with high, medium and low tissue distribution properties, propranolol, diazepam, indomethacin and AZD4721 were infused intravenously to steady state to ensure equal unbound drug concentrations throughout the body. The results showed that propranolol had higher unbound concentrations in the ELF compared to the plasma whilst this was not the case for the other compounds. Experiments with different BAL volumes and repeated lavaging indicated that the amount of drug extracted is very sensitive to experimental procedure. In addition, the results show that the unbound concentrations in ELF compared to plasma differs dependent on molecule class and tissue distribution properties. Overall data suggests that lavaging can remove drug from lung tissue in addition to ELF and highlights significant uncertainty in the robustness of the procedure for determining ELF drug concentrations.

Pharmaceutical strategies to extend pulmonary exposure of inhaled medicines

Pulmonary administration route has been extensively exploited for the treatment of local lung diseases such as asthma, chronic obstructive pulmonary diseases and respiratory infections, and systemic diseases such as diabetes. Most inhaled medicines could be cleared rapidly from the lungs and their therapeutic effects are transit. The inhaled medicines with extended pulmonary exposure may not only improve the patient compliance by reducing the frequency of drug administration, but also enhance the clinical benefits to the patients with improved therapeutic outcomes. This article systematically reviews the physical and chemical strategies to extend the pulmonary exposure of the inhaled medicines. It starts with an introduction of various physiological and pathophysiological barriers for designing inhaled medicines with extended lung exposure, which is followed by recent advances in various strategies to overcome these barriers. Finally, the applications of the inhaled medicines with extended lung exposure for the treatment of various diseases and the safety concerns associated to various strategies to extend the pulmonary exposure of the inhaled medicines are summarized.

In vivo efficacy of a dry powder formulation of ciprofloxacin-copper complex in a chronic lung infection model of bioluminescent Pseudomonas aeruginosa

A significant limitation of locally delivered treatments for chronic pulmonary infections is often the short residence time within the airways. Ciprofloxacin (CIP), for example, undergoes rapid absorption from the airway lumen. Previously, we demonstrated that the complexation of CIP with copper (CIP-Cu) reduces its apparent epithelial permeability and pulmonary absorption rate without affecting antimicrobial activity against Pseudomonas aeruginosa grown planktonically or as biofilms. This study aimed to evaluate the in vivo efficacy of CIP-Cu, prepared as a dry powder, in a chronic lung infection model. The powders were prepared by jet milling (CIP-HCl) and by spray drying (CIP-Cu). A bioluminescent strain of P. aeruginosa (PAO1::p16Slux) was used to prepare bacteria-loaded agar beads that were inoculated intratracheally to rats. The dynamics of the infection were monitored using luminometry. The bacteria/beads ratio was optimized to allow the highest luminescence signal and animal survival for 8 days. The efficacy of the treatment was evaluated by luminometry in addition to the end-point (Day 8) where colony counting was performed after lung harvesting. Luminescent P. aeruginosa entrapped in agar beads were useful to monitor the spatial development of the chronic lung infection in rats. The rats were treated with the dry powders in a nose-only inhalation exposure system (NOIES). CIP-Cu and CIP-HCl powders showed similar aerodynamic properties and comparable CIP lung deposition. However, treatment with CIP-Cu significantly (p < 0.01) reduced by 4-log the number of CFU of P. aeruginosa per lung in the chronic infection model, whereas CIP-HCl effect was not different from the untreated control group.

Control of the Lung Residence Time of Highly Permeable Molecules after Nebulization: Example of the Fluoroquinolones

Pulmonary drug delivery is a promising strategy to treat lung infectious disease as it allows for a high local drug concentration and low systemic side effects. This is particularly true for low-permeability drugs, such as tobramycin or colistin, that penetrate the lung at a low rate after systemic administration and greatly benefit from lung administration in terms of the local drug concentration. However, for relatively high-permeable drugs, such as fluoroquinolones (FQs), the rate of absorption is so high that the pulmonary administration has no therapeutic advantage compared to systemic or oral administration. Formulation strategies have thus been developed to decrease the absorption rate and increase FQs’ residence time in the lung after inhalation. In the present review, some of these strategies, which generally consist of either decreasing the lung epithelium permeability or decreasing the release rate of FQs into the epithelial lining fluid after lung deposition, are presented in regards to their clinical aspects.

Pulmonary Pharmacokinetics of Oseltamivir Carboxylate in Rats after Nebulization or Intravenous Administration of Its Prodrug, Oseltamivir Phosphate

The aim of this study was to investigate the pharmacokinetics of oseltamivir phosphate, a prodrug, and its active moiety in plasma and lung after its nebulization and intravenous administration in rats. Only 2% of prodrug was converted into active moiety presystematically, attesting to a low advantage of oseltamivir phosphate nebulization, suggesting that oseltamivir phosphate nebulization is not a good option to obtain a high exposure of the active moiety at the infection site within lung.

Preclinical Pharmacokinetic and Pharmacodynamic Data To Support Cefoxitin Nebulization for the Treatment of Mycobacterium abscessus

Mycobacterium abscessus is responsible for difficult-to-treat chronic pulmonary infections in humans. Current regimens, including parenteral administrations of cefoxitin (FOX) in combination with amikacin and clarithromycin, raise compliance problems and are frequently associated with high failure and development of resistance. Aerosol delivery of FOX could be an interesting alternative. FOX was administered to healthy rats by intravenous bolus or intratracheal nebulization, and concentrations were determined in plasma and epithelial lining fluid (ELF) by liquid chromatography-tandem mass spectrometry. After intrapulmonary administration, the FOX area under the curve within ELF was 1,147 times higher than that in plasma, indicating that this route of administration offers a biopharmaceutical advantage over intravenous administration. FOX antimicrobial activity was investigated using time-kill curves combined with a pharmacokinetic/pharmacodynamic (PK/PD) type modeling approach in order to account for its in vitro instability that precludes precise determination of MIC. Time-kill data were adequately described by a model including in vitro degradation, a sensitive (S) and a resistant (R) bacteria subpopulation, logistic growth, and a maximal inhibition-type growth inhibition effect of FOX. Median inhibitory concentrations were estimated at 16.2 and 252 mg/liter for the S and R subpopulations, respectively. These findings suggest that parenteral FOX dosing regimens used in patients for the treatment of M. abscessus are not sufficient to reduce the bacterial burden and that FOX nebulization offers a potential advantage that needs to be further investigated.

Use of leucine to improve aerodynamic properties of ciprofloxacin-loaded maltose microparticles for inhalation

Ciprofloxacin (CIP) apparent permeability and absorption rate across the pulmonary epithelium can be controlled by its complexation with copper (II) ion. The aim of the current study was to formulate CIP-Cu-loaded microparticles comprising three main excipients, calcium carbonate, maltose and L-leucine, and to process by spray drying so as to generate particles with suitable aerodynamic properties for pulmonary delivery using a dry powder inhaler. Different maltose:calcium carbonate ratios were used to prepare microparticles, and the role of the excipients on the particles’ physicochemical properties, stability, and aerosolization characteristics were investigated. All the formulations without L-leucine were fully X-ray amorphous. In the presence of L-leucine, diffraction peaks of low intensity were observed, which were attributed to the crystallization of the L-leucine at the particle surfaces. The addition of L-leucine modified the particle morphology and reduced the median geometric and aerodynamic diameters to 3.2 and 3.4 µm, respectively. The fine particle fraction of powder emitted from a Handihaler® device was increased up to 65.4%, predicting high total lung deposition. Stability studies showed that the powder X-ray diffraction pattern did not change over 21 months of storage in desiccated conditions, suggesting a good physical stability of the optimized formulation comprised of CIP-Cu, maltose and L-Leucine.

An evaluation of inhaled antibiotic liposome versus antibiotic nanoplex in controlling infection in bronchiectasis

Inhaled antibiotic nanoparticles have emerged as an effective strategy to control infection in bronchiectasis lung owed to their mucus-penetrating ability. Using ciprofloxacin (CIP) as the model antibiotic, we evaluated dry powder inhaler (DPI) formulations of two classes of antibiotic nanoparticles (i.e. liposome and nanoplex) in their (1) physical characteristics (i.e. size, zeta potential, CIP payload, preparation efficiency), (2) dissolution in artificial sputum medium, (3) ex vivo mucus permeability, (4) antimicrobial activity against Pseudomonas aeruginosa in mucus, (5) cytotoxicity towards human lung epithelium cells, and (6) in vitro aerosolization efficiency. The results showed that the CIP nanoplex exhibited fast dissolution with CIP supersaturation generation, in contrast to the slower release of the liposome (80 versus 30% dissolution after 1 h). Both nanoparticles readily overcame the mucus barrier attributed to their nanosize and mucus-inert surface (50% permeation after 1 h), leading to their similarly high antipseudomonal activity. The CIP liposome, however, possessed much lower CIP payload than the nanoplex (84% versus 3.5%), resulting in high lipid contents in its DPI formulation that led to higher cytotoxicity and lower aerosolization efficiency. The CIP nanoplex thus represented a superior formulation owed to its simpler preparation, higher CIP payload hence lower dosage, better aerosolization, and lower cytotoxicity.

Population pharmacokinetic modeling to establish the role of P-glycoprotein on ciprofloxacin distribution to lung and prostate following intravenous and intratracheal administration to Wistar rats

Ciprofloxacin (CIP) is indicated for clinical treatment of urinary and respiratory tract infections. Poor infection site penetration and consequent insufficient exposure to the antimicrobial agent may be the reason for some therapeutic failures. Ciprofloxacin is reported as a substrate for efflux transporters, such as P-glycoprotein, which could be related to the presence of sub-therapeutic drug concentration at the infection site. In the present work we evaluated CIP pharmacokinetics (PK) in plasma and lung and prostate tissues of Wistar rats after intravenous (i.v.) and intratracheal (i.t.) dosing (7 mg/Kg) in the presence and absence of P-gp inhibitor tariquidar (TAR, 15 mg/Kg). Microdialysis was applied to determine free tissue concentration-time profiles and the obtained data were analyzed by non-compartmental and population PK (popPK) analysis. A sequential strategy was used to develop the popPK model: characterization of CIP PK in tissues (Tissue model) was performed subsequently to CIP PK modeling in plasma (Plasma model). Two and three compartmental models were used to simultaneously characterize plasma concentrations after i.t. and i.v. dosing; the distribution model was developed by separating the central compartment into venous and arterial compartment and by adding lung and prostate; TAR was identified as a significant covariate for clearance and volume of distribution of central compartment as well as for inter-compartmental clearance. Our results indicate an impact of P-gp on plasma PK, likely by acting on renal active secretion of CIP. Regarding CIP exposure in lung and prostate tissues, our results suggest a complex interplay between drug transporters; P-gp inhibition by TAR was likely counterbalanced by the activity of other efflux/influx transporters, which could not be fully characterized by our model.

Biopharmaceutical Characterization of Nebulized Antimicrobial Agents in Rats: 6. Aminoglycosides

Amikacin and gentamicin pharmacokinetic behaviors after nebulization were determined by comparing plasma and pulmonary epithelial lining fluid (ELF) concentrations in rats after intratracheal and intravenous administrations. ELF areas under concentration-time curve were 874 and 162 times higher after nebulization than after intravenous administration for amikacin and gentamicin, respectively. Even if both molecules appear to be good candidates for nebulization, these results demonstrate a much higher targeting advantage of nebulization for amikacin than for gentamicin.

New aerosol formulation to control ciprofloxacin pulmonary concentration

Ciprofloxacin (CIP) apparent permeability across a pulmonary epithelium model can be controlled by the affinity of its complex with a metal cation. The higher the complex affinity, the larger is the reduction in CIP apparent permeability. The aim of this study was to evaluate if the control of the CIP apparent permeability observed in vitro could be transposed in vivo to control the CIP lung-to-blood absorption rate and CIP concentrations in the lung epithelial lining fluid (ELF) after intratracheal (IT) administration. Two types of innovative inhalable microparticles loaded with the low-affinity CIP-calcium complex (CIP-Ca) or with the high-affinity CIP-copper complex (CIP-Cu) were formulated and characterized. Then, ELF and plasma pharmacokinetics of CIP were studied in rats after IT administration of these two types of microparticles and of a CIP solution (2.5mg/kg). The presence of Cu²⁺ had little effect on the microparticle properties and the dry powder had aerodynamic properties which allowed it to reach the lungs. CIP concentrations in ELF were much higher after CIP-Cu microparticles IT administration compared to the other two formulations, with mean AUC_ELF to AUC_u,plasma ratios equal to 1069, 203 and 9.8 after CIP-Cu microparticles, CIP-Ca microparticles and CIP solution pulmonary administration, respectively. No significant modification of lung toxicity markers was found (lactate dehydrogenase and total protein). CIP complexation with Cu²⁺ seems to be an interesting approach to obtain high CIP concentrations in the ELF of lungs after dry powder IT administration.

Advances in experimental and mechanistic computational models to understand pulmonary exposure to inhaled drugs

Prediction of local exposure following inhalation of a locally acting pulmonary drug is central to the successful development of novel inhaled medicines, as well as generic equivalents. This work provides a comprehensive review of the state of the art with respect to multiscale computer models designed to provide a mechanistic prediction of local and systemic drug exposure following inhalation. The availability and quality of underpinning in vivo and in vitro data informing the computer based models is also considered. Mechanistic modelling of local exposure has the potential to speed up and improve the chances of successful inhaled API and product development. Although there are examples in the literature where this type of modelling has been used to understand and explain local and systemic exposure, there are two main barriers to more widespread use. There is a lack of generally recognised commercially available computational models that incorporate mechanistic modelling of regional lung particle deposition and drug disposition processes to simulate free tissue drug concentration. There is also a need for physiologically relevant, good quality experimental data to inform such modelling. For example, there are no standardized experimental methods to characterize the dissolution of solid drug in the lungs or measure airway permeability. Hence, the successful application of mechanistic computer models to understand local exposure after inhalation and support product development and regulatory applications hinges on: (i) establishing reliable, bio-relevant means to acquire experimental data, and (ii) developing proven mechanistic computer models that combine: a mechanistic model of aerosol deposition and post-deposition processes in physiologically-based pharmacokinetic models that predict free local tissue concentrations.

Population Pharmacokinetic Modeling as a Tool To Characterize the Decrease in Ciprofloxacin Free Interstitial Levels Caused by Pseudomonas aeruginosa Biofilm Lung Infection in Wistar Rats

Biofilm formation plays an important role in the persistence of pulmonary infections, for example, in cystic fibrosis patients. So far, little is known about the antimicrobial lung disposition in biofilm-associated pneumonia. This study aimed to evaluate, by microdialysis, ciprofloxacin (CIP) penetration into the lungs of healthy and Pseudomonas aeruginosa biofilm-infected rats and to develop a comprehensive model to describe the CIP disposition under both conditions. P. aeruginosa was immobilized into alginate beads and intratracheally inoculated 14 days before CIP administration (20 mg/kg of body weight). Plasma and microdialysate were sampled from different animal groups, and the observations were evaluated by noncompartmental analysis (NCA) and population pharmacokinetic (popPK) analysis. The final model that successfully described all data consisted of an arterial and a venous central compartment and two peripheral distribution compartments, and the disposition in the lung was modeled as a two-compartment model structure linked to the venous compartment. Plasma clearance was approximately 32% lower in infected animals, leading to a significantly higher level of plasma CIP exposure (area under the concentration-time curve from time zero to infinity, 27.3 ± 12.1 μg · h/ml and 13.3 ± 3.5 μg · h/ml in infected and healthy rats, respectively). Despite the plasma exposure, infected animals showed a four times lower tissue concentration/plasma concentration ratio (lung penetration factor = 0.44 and 1.69 in infected and healthy rats, respectively), and lung clearance (CL_lung) was added to the model for these animals (CL_lung = 0.643 liters/h/kg) to explain the lower tissue concentrations. Our results indicate that P. aeruginosa biofilm infection reduces the CIP free interstitial lung concentrations and increases plasma exposure, suggesting that plasma concentrations alone are not a good surrogate of lung concentrations.

Biopharmaceutical Characterization of Nebulized Antimicrobial Agents in Rats: 5. Oseltamivir Carboxylate

The aim of this study was to determine the biopharmaceutical characteristics of oseltamivir carboxylate (OC) after pulmonary delivery. After OC bolus and intratracheal nebulization (NEB) in rats, blood was collected and bronchoalveolar lavages (BALs) were performed. Epithelial lining fluid (ELF) concentrations were estimated from BAL fluid. The area under the curve (AUC) ratio for ELF to plasma was 842 times higher after NEB than after intravenous (i.v.) administration, indicating that OC nebulization offers a biopharmaceutical advantage over i.v. administration.

Biopharmaceutical Characterization of Nebulized Antimicrobial Agents in Rats. 4. Aztreonam

The aim of this study was to determine aztreonam (ATM) membrane permeability using Calu-3 cells and its plasma and pulmonary epithelial lining fluid (ELF) pharmacokinetics in rats after intratracheal nebulization and intravenous administration (15 mg · kg(-1)). ATM exhibits low Calu-3 permeability (0.07 ± 0.02 × 10(-6) cm · s(-1)), and a high area under the ELF/unbound plasma concentration time curve between 0 and infinity (AUCELF/AUCu,plasma) ratio of 1,069 was observed after nebulization in rats. These results confirm that ATM is a low-permeability molecule and a good candidate for nebulization.

Ciprofloxacin-Loaded Inorganic-Organic Composite Microparticles To Treat Bacterial Lung Infection

Ciprofloxacin (CIP) is an antibiotic that has been clinically trialed for the treatment of lung infections by aerosolization. However, CIP is rapidly systemically absorbed after lung administration, increasing the risk for subtherapeutic pulmonary concentrations and resistant bacteria selection. In the presence of calcium, CIP forms complexes that reduce its oral absorption. Such complexation may slow down CIP absorption from the lung thereby maintaining high concentration in this tissue. Thus, we developed inhalable calcium-based inorganic-organic composite microparticles to sustain CIP within the lung. The aerodynamics and micromeritic properties of the microparticles were characterized. FTIR and XRD analysis suggest that the inorganic component of the particles comprised amorphous calcium carbonate and amorphous calcium formate, and that CIP and calcium interact in a 1:1 stoichiometry in the particles. CIP was completely released from the microparticles within 7 h, with profiles showing a slight dependence on pH (5 and 7.4) compared to the dissolution of pure CIP. Transport studies of CIP across Calu-3 cell monolayers, in the presence of various calcium concentrations, showed a decrease of up to 84% in CIP apparent permeability. The apparent minimum inhibitory concentration of CIP against Pseudomonas aeruginosa and Staphylococcus aureus was not changed in the presence of the same calcium concentration. These results indicate that the designed particles should provide sustained levels of CIP with therapeutic effect in the lung. With these microparticles, it should be possible to control CIP pharmacokinetics within the lung, based on controlled CIP release from the particles and reduced apparent permeability across the epithelial barrier due to the cation-CIP interaction.

Biopharmaceutical Characterization of Nebulized Antimicrobial Agents in Rats: 3. Tobramycin

The aim of this study was to determine the biopharmaceutical characteristics of tobramycin (TOB) after nebulization in rats. TOB was administered by intravenous (i.v.) bolus or intratracheal nebulization (3 mg · kg(-1)), and concentrations were determined in plasma and epithelial lining fluid (ELF) by liquid chromatography-tandem mass spectrometry. The ratio of the TOB concentration in ELF to the plasma area under the curve (AUC) was more than 200 times as high after NEB as after i.v. bolus administration, indicating that TOB nebulization offers a biopharmaceutical advantage over i.v. administration.

Pharmacokinetics of Colistin Methansulphonate (CMS) and Colistin after CMS Nebulisation in Baboon Monkeys

PURPOSE

The objective of this study was to compare two different nebulizers: Eflow rapid® and Pari LC star® by scintigraphy and PK modeling to simulate epithelial lining fluid concentrations from measured plasma concentrations, after nebulization of CMS in baboons.

METHODS

Three baboons received CMS by IV infusion and by 2 types of aerosols generators and colistin by subcutaneous infusion. Gamma imaging was performed after nebulisation to determine colistin distribution in lungs. Blood samples were collected during 9 h and colistin and CMS plasma concentrations were measured by LC-MS/MS. A population pharmacokinetic analysis was conducted and simulations were performed to predict lung concentrations after nebulization.

RESULTS

Higher aerosol distribution into lungs was observed by scintigraphy, when CMS was nebulized with Pari LC® star than with Eflow Rapid® nebulizer. This observation was confirmed by the fraction of CMS deposited into the lung (respectively 3.5% versus 1.3%).CMS and colistin simulated concentrations in epithelial lining fluid were higher after using the Pari LC star® than the Eflow rapid® system.

CONCLUSIONS

A limited fraction of CMS reaches lungs after nebulization, but higher colistin plasma concentrations were measured and higher intrapulmonary colistin concentrations were simulated with the Pari LC Star® than with the Eflow Rapid® system.

Pulmonary delivery of pyrazinamide-loaded large porous particles

We have improved the aerodynamic properties of pyrazinamide loaded large porous particles (PZA-LPPs) designed for pulmonary delivery. To overcome the segregation of the different components occurring during the spray drying process and to obtain homogeneous LPPs, spray drying parameters were modified to decrease the drying speed. As a result, good aerodynamic properties for lung delivery were obtained with a fine particle fraction (FPF) of 40.1±1.0%, an alveolar fraction (AF) of 29.6±3.1%, a mass median aerodynamic diameter (MMADaer) of 4.1±0.2μm and a geometric standard deviation (GSD) of 2.16±0.16. Plasma and epithelial lining fluid (ELF) concentrations of pyrazinamide were evaluated after intratracheal insufflation of PZA-LPPs (4.22mgkg(-1)) into rats and compared to intravenous administration (iv) of a pyrazinamide solution (5.82mgkg(-1)). The in vivo pharmacokinetic evaluation of PZA-LPPs in rats reveals that intratracheal insufflation of PZA-LPPs leads to a rapid absorption in plasma with an absolute bioavailability of 66%. This proves that PZA-LPPs dissolve fast upon deposition and that PZA crosses efficiently the lung barrier to reach the systemic circulation. PZA concentrations were 1.28-fold higher in ELF after intratracheal administration than after iv administration and the ratio of ELF concentrations over plasma concentrations was 2-fold greater. Although these improvements are moderate, lung delivery of PZA appears an interesting alternative to oral delivery of the molecule and should now be tested in an infected animal model to evaluate its efficacy against Mycobacterium tuberculosis.

Biopharmaceutical characterization of nebulized antimicrobial agents in rats: 2. Colistin

The purpose of this study was to investigate the pharmacokinetic properties of colistin following intrapulmonary administration of colistin sulfate in rats. Colistin was infused or delivered in nebulized form at a dose of 0.35 mg/kg of body weight in rats, and plasma drug concentrations were measured for 4 h after administration. Bronchoalveolar lavages (BAL) were also conducted at 0.5, 2, and 4 h after intravenous (i.v.) administration and administration via nebulized drug to estimate epithelial lining fluid (ELF) drug concentrations. Unbound colistin plasma concentrations at distribution equilibrium (2 h postdosing) were almost identical after i.v. infusion and nebulized drug inhalation. ELF drug concentrations were undetectable in BAL samples after i.v. administration, but they were about 1,800 times higher than unbound plasma drug levels at 2 h and 4 h after administration of the nebulized drug. Simultaneous pharmacokinetic modeling of plasma and ELF drug concentrations was performed with a model characterized by a fixed physiological volume of ELF (VELF), a passive diffusion clearance (QELF) between plasma and ELF, and a nonlinear influx transfer from ELF to the central compartment, which was assessed by reducing the nebulized dose of colistin by 10-fold (0.035 mg kg(-1)). The km was estimated to be 133 μg ml(-1), and the Vmax, in-to-Km ratio was equal to 2.5 × 10(-3) liter h(-1) kg(-1), which was 37 times higher than the QELF (6.7 × 10(-5) liter h(-1) kg(-1)). This study showed that with the higher ELF drug concentrations after administration via nebulized aerosol than after intravenous administration, for antibiotics with low permeability such as colistin, nebulization offers a real potential over intravenous administration for the treatment of pulmonary infections.