Microbial composition and structure of aerobic granular sewage biofilms

Community successional patterns and inter-kingdom interactions during granular biofilm development

Aerobic granular sludge is a compact and efficient biofilm process used for wastewater treatment which has received much attention and is currently being implemented worldwide. The microbial associations and their ecological implications occurring during granule development, especially those involving inter-kingdom interactions, are poorly understood. In this work, we monitored the prokaryote and eukaryote community composition and structure during the granulation of activated sludge for 343 days in a sequencing batch reactor (SBR) and investigated the influence of abiotic and biotic factors on the granule development. Sludge granulation was accomplished with low-wash-out dynamics at long settling times, allowing for the microbial communities to adapt to the SBR environmental conditions. The sludge granulation and associated changes in microbial community structure could be divided into three stages: floccular, intermediate, and granular. The eukaryotic and prokaryotic communities showed parallel successional dynamics, with three main sub-communities identified for each kingdom, dominating in each stage of sludge granulation. Although inter-kingdom interactions were shown to affect community succession during the whole experiment, during granule development random factors like the availability of settlement sites or drift acquired increasing importance. The prokaryotic community was more affected by deterministic factors, including reactor conditions, while the eukaryotic community was to a larger extent shaped by biotic interactions (including inter-kingdom interactions) and stochasticity.

Characteristics of fungi formation in urban sewer at different flow conditions: Distribution, metabolism, and pathogenicity

Fungi are the significant components of the sewer ecology system which can consume substances and exhibit pathogenicity. However, the characteristics of fungi formation and metabolism in the complex sewer environment have not been revealed in depth. In this study, gradient flow conditions were conducted in a pilot sewer and the formation characteristics of fungi were synthetically investigated. The results showed that the low flow rate at 0.1-0.4 m/s led to the loose morphology of biofilms, while the overly loose environment did not allow fungi communities to thrive in sewer. The dense biofilms were found at the middle flow condition (0.4-0.6 m/s), and the fungal communities with degradation functions were exuberant at this condition (such as Tremellales with relative abundance of 6.18% and Talaromyces with relative abundance of 6.51%). In particular, eleven kinds of fungi with known pathogenicity of the sewer biofilm were found in this study, and it is worth noting that the abundance of pathogenic fungi at medium flow rates is significantly higher than that at other flow conditions (higher than 10 %). While, excessive flow shear force (0.8-1.2 m/s) led to biofilm shedding which caused hindering the proper generation of fungi. In summary, the pollutant transformation and pathogenic exposure conducted by fungi communities could affect the sewer management process significantly, and this study could provide research foundation for wastewater quality prediction and management of pathogenic risk in sewer systems.

Potential of aerobic granular sludge membrane bioreactor (AGMBR) in wastewater treatment

This investigation is a review of the potential of aerobic granular sludge membrane bioreactor (AGMBR) in wastewater treatment due to the advantage of combination of membrane and aerobic granules for reducing membrane fouling and enhancing removal performance. The AGMBR is the same as the membrane bioreactor (MBR), but the activated sludge is replaced by aerobic granular sludge. This technology combines the advantages of aerobic granular sludge, such as good settleability, strong ability to withstand shock-loadings and high organic loading rate, and capacity of simultaneous chemical oxygen demand (COD) and nitrogen removal, and advantages of membrane bioreactor (MBR) such as excellent effluent quality, high biomass content, low excess sludge production, and small land requirement. Therefore, it can be considered a promising option for efficient wastewater treatment. Most studies have shown that aerobic granules could control membrane fouling, which often occurs in MBR. The main fouling mechanism was determined to be surface fouling by floccular sludge in MBR but pore fouling by colloids and solutes in AGMBR. Aerobic granular sludge also removed COD and nitrogen simultaneously, with more than 60% total nitrogen removal efficiency. The formation and stability of aerobic granules in AGMBR with various operational modes are discussed in this study.

Static magnetic field increases aerobic nitrogen removal from hypersaline wastewater in activated sludge with coexistence of fungi and bacteria

Fungi have been found to exist in activated sludge treating saline wastewater, but their role in removing pollution has been neglected. This study explored the aerobic removal of total inorganic nitrogen (TIN) from saline wastewater under static magnetic fields (SMFs) with several strengths. Compared to the control, the aerobic removal of TIN was significantly increased by 1.47 times in 50 mT SMF, due to the increased dissimilation nitrogen removal by fungi and bacteria. Under SMF, fungal nitrogen dissimilation removal was significantly increased by 3.65 times. The fungal population size decreased, and its community composition changed significantly under SMF. In contrast, bacterial community composition and population remained relatively stable. Under SMFs, heterotrophic nitrification - aerobic denitrification bacteria Paracoccus and the fungi denitrifying Candida formed a synergistic interaction. This study elucidates the fungal role in aerobic TIN removal and provides an efficient solution to improve TIN removal from saline wastewater by SMF.

Highly Enriched Anammox Bacteria with a Novel Granulation Model Regulated by Epistylis spp. in Domestic Wastewater Treatment

Anammox granulation is an efficient solution proffered to enrich slow-growing anammox bacteria (AnAOB), but the lack of effective granulation strategies for low-strength domestic wastewater impedes its application. In this study, a novel granulation model regulated by Epistylis spp. for highly enriched AnAOB was revealed for the first time. Notably, anammox granulation was achieved within 65 d of domestic wastewater treatment. The stalks of Epistylis spp. were found to act as the skeleton of granules and provide attachment points for bacterial colonization, and the expanded biomass layer in turn provided more area for the unstalked free-swimming zooids. Additionally, Epistylis spp. exerted much less predation stress on AnAOB than on nitrifying bacteria, and AnAOB tended to grow in aggregates in the interior of granules, thus favoring the growth and retention of AnAOB. Ultimately, the relative abundance of AnAOB reached up to a maximum of 8.2% in granules (doubling time of 9.9 d) compared to 1.1% in flocs (doubling time of 23.1 d), representing the most substantial disparity between granules and flocs. Overall, our findings advance the current understanding of interactions involved in granulation between protozoa and microbial communities and offer new insight into the specific enrichment of AnAOB under the novel granulation model.

Anammox-based granulation cycle for sustainable granular sludge biotechnology from mechanisms to strategies: A critical review

Anaerobic ammonium oxidation (anammox) granular sludge is a promising biotechnological process for treating low-carbon nitrogenous wastewater, and is featured with low energy consumption and footprint. Previous theoretical and experimental research on anammox granular sludge processes mainly focused on granulation (flocs → granules), but pay little attention to the granulation cycle including granulation and regeneration. This work reviewed the previous studies from the perspective of anammox granules lifecycle and proposed various sustainable formation mechanisms of anammox granules. By reviewing the anaerobic, aerobic, and anammox granulation mechanisms, we summarize the mechanisms of thermodynamic theory, heterogeneous growth, extracellular polymeric substance (EPS)-based adhesion, quorum sensing (QS)-based regulation, biomineralization-based growth, and stratification of microorganisms to understand anammox granulation. In the regeneration process, the formation of precursors for re-granulation is explained by the mechanisms of physical crushing, quorum quenching and dispersion cue sensing. Based on the granulation cycle mechanism, the rebuilding of the normal regeneration process is considered essential to avoid granule floatation and the wash-out of granules. This comprehensive review indicates that future research on anammox granulation cycle should focus on the effects of filamentous bacteria in denitrification-anammox granulation cycle, the role of QS/ quorum quenching (QQ)-based autoinducers, development of diversified mechanisms to understand the cycle and the cycle mechanisms of stored granules.

C058 and Other Functional Microorganisms Promote the Synthesis of Extracellular Polymer Substances in Mycelium Biofloc

The mycelium biofloc bioaugmented by Cordyceps strain C058 effectively purifies water, which may be related to the synthesis of extracellular polymer substances. To verify this conjecture, we analyzed the changes in extracellular polymer substances content in the mycelium biofloc under various hydraulic retention times (36 h, 18 h, and 11 h). The microstructure and microflora composition were analyzed using a scanning electron microscope and high-throughput sequencing. The ordinary biofloc without bioaugmentation was taken as a control. The results showed that under the above hydraulic retention time, the extracellular polymer substances contents of the mycelium biofloc were 51.20, 55.89, and 33.84 mg/g, respectively, higher than that of the ordinary biofloc (14.58, 15.72, and 18.19 mg/g). The protein content or the polysaccharide content also followed the same trend. Meanwhile, the sedimentation performance of the mycelium biofloc was better than that of the ordinary biofloc, attributed to the content of the extracellular polymer substances. It is worth noting that C058 is the main biofloc content, which promotes the synthesis of extracellular polymer substances in the mycelium biofloc. Other functional microorganisms in the mycelium biofloc were Janthinobacterium, Phormidium, Leptolyngbya, Hymenobacter, and Spirotrichea, which also promote the synthesis of extracellular polymer substances.

Hypersaline Wastewater Produced from Pickled Mustard Tuber (Chinese Zhacai): Current Treatment Status and Prospects

Pickled mustard tuber, a worldwide condiment, is increasing at a fast growth rate. Its production generates a considerable amount of hypersaline wastewater containing NaCl of 7 wt.%, COD of 30,000 mg L−1, NH3-N of 400 mg L−1, and TP of 300 mg L−1. Pickled mustard tuber wastewater (PMTW) has severe effects on crops, deterioration of water quality, soil infertility and ecological systems. Due to the technic difficulties and insufficient support from the local governments; however, PMTW has not yet been widely investigated and well summarized. Therefore, this manuscript reviewed the relatively latest advances in PMTW. Physicochemical and biological hybrid processes mainly treat PMTW and the corresponding cost is 6.00 US dollars per ton. In the context of double carbon capture capacity in China and the development of the pickled mustard industry, PMTW sauce and sustainable reuse such as nutrient recovery, acid and alkaline regeneration and renewable energy may be bright prospects.

Single Ultraviolet-C light treatment of early stage marine biofouling delays subsequent community development

Past studies of Ultraviolet-C (UV-C) radiation as a marine antifoulant have focused on repeated doses. However, single or very low frequency exposures of UV-C could create more plausible applications for certain marine structures. The objective of the study reported here was to apply a single treatment of UV-C radiation to an early stage marine biofouling community to observe subsequent effects on biofouling development. Biofouling formed over a 2-week field immersion received UV-C treatments of 0 (control), 4, 20, or 120 min, and subsequent progression was then monitored weekly for 16 weeks. Analysis of acute effects and later macrofouling development suggested direct toxicity of UV-C illumination to invertebrate recruits caused reduction of subsequent biofouling (compared to controls) that persisted for up to 16 weeks following the longest UV-C treatment. Thus, UV-C treatments spaced by days or even weeks could be an option for some applications of UV-C radiation as an antifoulant.

Sustained nitrogen loss in a symbiotic association of Comammox Nitrospira and Anammox bacteria

The discovery of anaerobic ammonia-oxidizing bacteria (Anammox) and, more recently, aerobic bacteria common in many natural and engineered systems that oxidize ammonia completely to nitrate (Comammox) have significantly altered our understanding of the global nitrogen cycle. A high affinity for ammonia (K_m(app),NH3 ≈ 63nM) and oxygen place Comammox Nitrospira inopinata, the first described isolate, in the same trophic category as organisms such as some ammonia-oxidizing archaea. However, N. inopinata has a relatively low affinity for nitrite (K_m,NO2 ≈ 449.2μM) suggesting it would be less competitive for nitrite than other nitrite-consuming aerobes and anaerobes. We examined the ecological relevance of the disparate substrate affinities by coupling it with the Anammox bacterium Candidatus Brocadia anammoxidans. Synthetic communities of the two were established in hydrogel granules in which Comammox grew in the aerobic outer layer to provide Anammox with nitrite in the inner anoxic core to form dinitrogen gas. This spatial organization was confirmed with FISH imaging, supporting a mutualistic or commensal relationship. The functional significance of interspecies spatial organization was informed by the hydrogel encapsulation format, broadening our limited understanding of the interplay between these two species. The resulting low nitrate formation and the competitiveness of Comammox over other aerobic ammonia- and nitrite-oxidizers sets this ecological cooperation apart and points to potential biotechnological applications. Since nitrate is an undesirable product of wastewater treatment effluents, the Comammox-Anammox symbiosis may be of economic and ecological importance to reduce nitrogen contamination of receiving waters.

Isolation and characterization of a strain with high microbial attachment in aerobic granular sludge

Aerobic granule is a special microbial aggregate associated with biofilm structure. The formation of aerobic granular sludge is primarily depending on its bacterial community and relevant microbiological properties. In this experiment, a strain with high microbial attachment was isolated from aerobic granular sludge, and the detailed characteristics were examined. Its high attachment ability could reach 2.34 (OD_600nm), while other low attachment values were only around 0.06-0.32, which indicated a big variation among the different bacteria. The strain exhibited a very special morphology with many fibric fingers under SEM observation. A distinctive behaviour was to form a spherical particle by themselves, which would be very beneficial for the formation and development of granular sludge. The EPS measurement showed that its PN content was higher than low attachment bacteria, and 3D-EEM confirmed that there were some different components. Based on the 16S rRNA analysis, it was identified to mostly belong to Stenotrophomonas. Its augmentation to particle sludge cultivation demonstrated that the strain could significantly promote the formation of aerobic granule. Conclusively, it was strongly suggested that it might be used as a good and potential model strain or chassis organism for the aerobic granular sludge formation and development.

Interactions of microalgae-bacteria consortia for nutrient removal from wastewater: A review

Nitrogen and phosphorus pollution can cause eutrophication, resulting in ecosystem disruption. Wastewater treatment systems employing microalgae-bacteria consortia have the potential to enhance the nutrient removal efficiency from wastewater through mutual interaction and synergetic effects. The knowledge and control of the mechanisms involved in microalgae-bacteria interaction could improve the system's ability to transform and recover nutrients. In this review, a critical evaluation of recent literature was carried out to synthesize knowledge related to mechanisms of interaction between microalgae and bacteria consortia for nutrient removal from wastewater. It is now established that microalgae can produce oxygen through photosynthesis for bacteria and, in turn, bacteria supply the required metabolites and inorganic carbon source for algae growth. Here we highlight how the interaction between microalgae and bacteria is highly dependent on the nitrogen species in the wastewater. When the nitrogen source is ammonium, the generated oxygen by microalgae has a positive influence on nitrifying bacteria. When the nitrogen source is nitrate, the oxygen can have an inhibitory effect on denitrifying bacteria. However, some strains of microalgae have the capability to supply hydrogen gas for hydrogenotrophic denitrifiers as an energy source. Recent literature on biogranulation of microalgae and bacteria and its application for nutrient removal and biomass recovery is also discussed as a promising approach. Significant research challenges remain for the integration of microalgae-bacteria consortia into wastewater treatment processes including microbial community control and process stability over long time horizons.

Unravelling the removal mechanisms of bacterial and viral surrogates in aerobic granular sludge systems

The aerobic granular sludge (AGS) process is an effective wastewater treatment technology for organic matter and nutrient removal that has been introduced in the market rapidly. Until now, limited information is available on AGS regarding the removal of bacterial and viral pathogenic organisms present in sewage. This study focussed on determining the relation between reactor operational conditions (plug flow feeding, turbulent aeration and settling) and physical and biological mechanisms on removing two faecal surrogates, Escherichia coli and MS2 bacteriophages. Two AGS laboratory-scale systems were separately fed with influent spiked with 1.0 × 10⁶ CFU/100 mL of E. coli and 1.3 × 10⁸ PFU/100 mL of MS2 bacteriophages and followed during the different operational phases. The reactors contained only granular sludge and no flocculent sludge. Both systems showed reductions in the liquid phase of 0.3 Log₁₀ during anaerobic feeding caused by a dilution factor and attachment of the organisms on the granules. Higher removal efficiencies were achieved during aeration, approximately 1 Log₁₀ for E. coli and 0.6 Log₁₀ for the MS2 bacteriophages caused mainly by predation. The 18S sequencing analysis revealed high operational taxonomic units (OTUs) of free-living protozoa genera Rhogostoma and Telotrochidium concerning the whole eukaryotic community. Attached ciliates propagated after the addition of the E. coli, an active contribution of the genera Epistylis, Vorticella, and Pseudovorticella was found when the reactor reached stability. In contrast, no significant growth of predators occurred when spiking the system with MS2 bacteriophages, indicating a low contribution of protozoa on the phage removal. Settling did not contribute to the removal of the studied bacterial and viral surrogates.

Biofilm mechanics in an extremely acidic environment: microbiological significance

A variety of natural biofilms were collected from an extremely acidic environment at Río Tinto (Spain). In order to provide insights into the structure-function relationship, the microstructure of the biofilms was explored using low temperature scanning electron microscopy (LTSEM) in combination with rheological analysis. The creep-recovery experiment results have demonstrated the typical behaviour of viscoelastic materials that combine both elastic and viscous characters. The LTSEM visualization and rheological characterization of biofilms revealed that the network density increased in bacterial biofilms and was the lowest in protist Euglena biofilms. This means that, in the latter biofilms, a lower density of interactions exist, suggesting that the whole system experiences enhanced mobility under external mechanical stress. The samples with the highest dynamic moduli (Leptospirillum-Acidiphilium, Zygnemopsis, Chlorella and Cyanidium) have shown the typical strain thinning behaviour, whereas the Pinnularia and Euglena biofilms exhibited a viscous thickening reaction. The Zygnemopsis filamentous floating structure has the highest cohesive energy and has shown distinctive enhanced resilience and connectivity. This suggests that biofilms should be viewed as soft viscoelastic systems the properties of which are determined by the main organisms and their extracellular polymeric substances. The fractional Maxwell model has been found to explain the rheological behaviour of the observed complex quite well, particularly the power-law behaviour and the characteristic broad relaxation response of these systems.

Microbial predation accelerates granulation and modulates microbial community composition

BACKGROUND

Bacterial communities are responsible for biological nutrient removal and flocculation in engineered systems such as activated floccular sludge. Predators such as bacteriophage and protozoa exert significant predation pressure and cause bacterial mortality within these communities. However, the roles of bacteriophage and protozoan predation in impacting granulation process remain limited. Recent studies hypothesised that protozoa, particularly sessile ciliates, could have an important role in granulation as these ciliates were often observed in high abundance on surfaces of granules. Bacteriophages were hypothesized to contribute to granular stability through bacteriophage-mediated extracellular DNA release by lysing bacterial cells. This current study investigated the bacteriophage and protozoan communities throughout the granulation process. In addition, the importance of protozoan predation during granulation was also determined through chemical killing of protozoa in the floccular sludge.

RESULTS

Four independent bioreactors seeded with activated floccular sludge were operated for aerobic granulation for 11 weeks. Changes in the phage, protozoa and bacterial communities were characterized throughout the granulation process. The filamentous phage, Inoviridae, increased in abundance at the initiation phase of granulation. However, the abundance shifted towards lytic phages during the maturation phase. In contrast, the abundance and diversity of protozoa decreased initially, possibly due to the reduction in settling time and subsequent washout. Upon the formation of granules, ciliated protozoa from the class Oligohymenophorea were the dominant group of protozoa based on metacommunity analysis. These protozoa had a strong, positive-correlation with the initial formation of compact aggregates prior to granule development. Furthermore, chemical inhibition of these ciliates in the floccular sludge delayed the initiation of granule formation. Analysis of the bacterial communities in the thiram treated sludge demonstrated that the recovery of 'Candidatus Accumulibacter' was positively correlated with the formation of compact aggregates and granules.

CONCLUSION

Predation by bacteriophage and protozoa were positively correlated with the formation of aerobic granules. Increases in Inoviridae abundance suggested that filamentous phages may promote the structural formation of granules. Initiation of granules formation was delayed due to an absence of protozoa after chemical treatment. The presence of 'Candidatus Accumulibacter' was necessary for the formation of granules in the absence of protozoa.

Effect of the co-treatment of synthetic faecal sludge and wastewater in an aerobic granular sludge system

The co-treatment of two synthetic faecal sludges (FS-1 and FS-2) with municipal synthetic wastewater (WW) was evaluated in an aerobic granular sludge (AGS) reactor. After characterisation, FS-1 showed the following concentrations, representative for medium-strength FS: 12,180 mg TSS L^-1, 24,300 mg total COD L^-1, 93.8 mg PO₃-P L^-1, and 325 mg NH₄-N L^-1. The NO₃-N concentration was relatively high (300 mg L^-1). For FS-2, the main difference with FS-1 was a lower nitrate concentration (18 mg L^-1). The recipes were added consecutively, together with the WW, to an AGS reactor. In the case of FS-1, the system was fed with 7.2 kg total COD m^-3d^-1 and 0.5 kg Nitrogen m^-3d^-1. Undesired denitrification occurred during feeding and settling resulting in floating sludge and wash-out. In the case of FS-2, the system was fed with 8.0 kg total COD m^-3d^-1 and 0.3 kg Nitrogen m^-3d^-1. The lower NO₃-N concentration in FS-2 resulted in less floating sludge, a more stabilised granular bed and better effluent concentrations. To enhance the hydrolysis of the slowly biodegradable particulates from the synthetic FS, an anaerobic stand-by period was added and the aeration period was increased. Overall, when compared to a control AGS reactor, a lower COD consumption (from 87 to 35 mg g^-1 VSS h^-1), P-uptake rates (from 6.0 to 2.0 mg P g VSS^-1 h^-1) and NH₄-N removal (from 2.5 to 1.4 mg NH₄-N g VSS^-1 h^-1) were registered after introducing the synthetic FS. Approximately 40% of the granular bed became flocculent at the end of the study, and a reduction of the granular size accompanied by higher solids accumulation in the reactor was observed. A considerable protozoa Vorticella spp. bloom attached to the granules and the accumulated particles occurred; potentially contributing to the removal of the suspended solids which were part of the FS recipe.

Response of an aerobic granular and conventional flocculated reactors against changing feed composition from simple composition to more complex

This research evaluated the effect of changing feed composition on the performances of a conventional activated sludge (CAS) and an aerobic granular sludge (AGS) reactor operated simultaneously. Both reactors were initially fed with 100% synthetic feed. In a stepwise manner, the feed composition was slowly changed to real primary effluent collected from a local wastewater treatment plant. After an initial stabilization period, both reactors could achieve more than 90% NH₄⁺-N removal. However, PO₄^3--P removal eventually reached to a maximum of 92% in the AGS and 88% in the CAS. COD removal in both reactors was least affected, with the lowest percent removal of 81 ± 3% achieved in AGS and 62 ± 4% in CAS respectively when fed with 100% real wastewater. Despite granule breakage the AGS reactor was able to remove the pollutants (COD, N, P). The abundance of Candidatus Accumulibacter, a polyphosphate accumulating organism, in the AGS system increased over the operational phases: II (6.2%), III (10.32%), and IV (11.9%). While in CAS, it increased from phase I to phase II (12.6%), but decreased in phase III to 9.9%. Genus-based classification revealed a successive increase in the relative abundance of Nitrospira to 11.05% during Phase III and 10.3% during Phase IV in the AGS. In contrast with its presence in the CAS, which was, 3.4% during Phase III and 9.5% during Phase IV.

Metagenomics revealed the phase-related characteristics during rapid development of halotolerant aerobic granular sludge

Efforts to produce aerobic granular sludge (AGS) for high-efficient and stable nutrient removal in high saline wastewaters have gained much attention recently. This study was undertaken to describe the phase-related characteristics of the rapid formation of glucose-fed salt-tolerant AGS (SAGS) generated from common municipal activated sludge using metagenomic approaches. The time needed for SAGS formation is about 11 days in a multi-ion matrix salinity of 3%. There were three distinct developmental phases during sludge maturation which were designated: I) the salinity adaptation phase (days 1-2), II) the particle-size transition phase (days 3-5) and III) the maturation and steady-state phase (days 6-11), respectively. Genome-based analysis revealed that during the phase I, members of the genus Mangrovibacter, which has the potential to secrete extracellular polymeric substances (EPS), dominated during the formation of initial SAGS aggregates. During phase II, fungi of the class Saccharomycetes, in particular the genus Geotrichum, became dominant and provided a matrix for bacterial attachment. This mutualistic interaction supported the rapid development and maintenance of mature SAGS. This work characterizes a robust approach for the rapid development of SAGS for efficient saline sewage treatment and provides unique insight into the granulation mechanism occurring during the development process.

Improving aerobic sludge granulation in sequential batch reactor by natural drying: Effluent sludge recovery and feeding back into reactor

One of the main problems in treating high volumes of wastewater is the long startup time required aerobic granular sludge (AGS), and this issue significantly limits the broad application of advanced AGS technology. To promote rapid AGS formation in the startup phase, a method was developed involving the recovery and natural drying of effluent sludge prior to feeding it back into the sequencing batch reactor (SBR). An analysis of the process shows that supplemented naturally dried sludge swiftly promoted sludge aggregation and granular sludge formation in the reactor, and feeding the SBR with naturally dried sludge aggregates (1.75 ± 0.05 g/L seven times) significantly shortened the granulation time in the startup phase by 14 days. In addition, MLSS, SVI₃₀, SVI₃₀/SVI₅, and the average granule size of AGS in the reactor were maintained at 4.66 g/L, 47.4 mL/g, 0.93, and 2.8 mm, respectively. When fed back into the bioreactor, the aggregates acted as nuclei/carriers in the rapid granulation and played a significant role in rendering the SBR operation stable. This approach could be used to eliminate the random granules aggregation-disintegration mechanism that occurs in the initial stage of AGS formation. The study results reveal that the removal rate of COD and NH₄⁺-N were above 95% and 96%, respectively. Furthermore, this approach requires less energy and significantly reduces the amount of sludge produced (as the effluent sludge is reused).

Removal of bacterial and viral indicator organisms in full-scale aerobic granular sludge and conventional activated sludge systems

The aim of this study was to evaluate the effectiveness of the novel aerobic granular sludge (AGS) wastewater treatment technology in removing faecal indicator organisms (FIOs) compared to the conventional activated sludge (CAS) treatment system. The work was carried out at two full-scale wastewater treatment plants (WWTP) in the Netherlands, Vroomshoop and Garmerwolde. Both treatment plants have a CAS and AGS system operated in parallel. The parallel treatment lines are provided with the same influent wastewater. The concentrations of the measured FIOs in the influent of the two WWTPs were comparable with reported literature values as follows: F-specific RNA bacteriophages at 10⁶ PFU/100 mL, and Escherichia coli (E. coli), Enterococci, and Thermotolerant coliforms (TtC) at 10⁵ to 10⁶ CFU/100 mL. Although both systems (CAS and AGS) are different in terms of design, operation, and microbial community, both systems showed similar FIOs removal efficiency. At the Vroomshoop WWTP, Log₁₀ removals for F-specific RNA bacteriophages of 1.4 ± 0.5 and 1.3 ± 0.6 were obtained for the AGS and CAS systems, while at the Garmerwolde WWTP, Log₁₀ removals for F-specific RNA bacteriophages of 1.9 ± 0.7 and 2.1 ± 0.7 were found for the AGS and CAS systems. Correspondingly, E. coli, Enterococci, and TtC Log₁₀ removals of 1.7 ± 0.7 and 1.1 ± 0.7 were achieved for the AGS and CAS systems at Vroomshoop WWTP. For Garmerwolde WWTP Log₁₀ removals of 2.3 ± 0.8 and 1.9 ± 0.7 for the AGS and CAS systems were found, respectively. The measured difference in removal rates between the plants was not significant. Physicochemical water quality parameters, such as the concentrations of organic matter, nutrients, and total suspended solids (TSS) were also determined. Overall, it was not possible to establish a direct correlation between the physicochemical parameters and the removal of FIOs for any of the treatment systems (CAS and AGS). Only the removal of TSS could be positively correlated to the E. coli removal for the AGS technology at the evaluated WWTPs.

Impact of hydraulic retention time and organic matter concentration on side-stream aerobic granular membrane bioreactor

This study investigated the effect of hydraulic retention time (HRT) and chemical oxygen demand (COD) concentration on membrane fouling in aerobic granular membrane bioreactor (AGMBR) in a systematic approach. Changes in HRT (7, 10, and 15 h) and COD (500, 1000 and 1500 mg/L) were applied in five operational phases, to determine the most significant parameters to control membrane fouling for enhanced AGMBR performance. Membrane permeability loss was dramatically intensified with increase in HRT from 7.5 to 15 h and COD from 500 to 1000 mg/L. The highest polysaccharide content of loosely bound EPS (0.41 mg PS/mg VSS) and soluble microbial products (SMPs) (27 mg PS/L) occurred alongside poor AGMBR performance. Variations in membrane fouling were accompanied with considerable changes in Flavobacterium, Thauera and Paracoccus populations. Analysis of variance (ANOVA) demonstrated that HRT and interaction between HRT and COD were the most significant parameters in controlling membrane fouling.

Effect of the gradual increase of salt on stability and microbial diversity of granular sludge and ammonia removal

Two sequential batch reactors were operated, aiming at forming aerobic granular sludge and studying the effects of the gradual increase of the NaCl concentration on the granule. structure and microbial diversity, and on the efficiency of ammonia removal. The reactors were fed with ammonia-enriched synthetic effluent and 5 g L^-1 of NaCl per week were applied. A decrease in the size of the granules was observed until they were completely disintegrated as the salt concentration increased up to 10 g L^-1. However, the ammonia removal efficiency remained high in all the salinities applied. By sequencing the 16S rRNA amplicon gene, the microbial community structure allowed the verification of the presence of several genera affiliated with the bacteria that perform both heterotrophic nitrification and aerobic denitrification, besides those involved in the conventional nitrification and denitrification and the ANAMMOX process. Salinity affected the microbial population related to the formation and stability of the granules.

Microbial community dynamics during aerobic granulation in a sequencing batch reactor (SBR)

Microorganisms in aerobic granules formed in sequencing batch reactors (SBR) remove contaminants, such as xenobiotics or dyes, from wastewater. The granules, however, are not stable over time, decreasing the removal of the pollutant. A better understanding of the granule formation and the dynamics of the microorganisms involved will help to optimize the removal of contaminants from wastewater in a SBR. Sequencing the 16S rRNA gene and internal transcribed spacer PCR amplicons revealed that during the acclimation phase the relative abundance of Acinetobacter reached 70.8%. At the start of the granulation phase the relative abundance of Agrobacterium reached 35.9% and that of Dipodascus 89.7% during the mature granule phase. Fluffy granules were detected on day 43. The granules with filamentous overgrowth were not stable and they lysed on day 46 resulting in biomass wash-out. It was found that the reactor operation strategy resulted in stable aerobic granules for 46 days. As the reactor operations remained the same from the mature granule phase to the end of the experiment, the disintegration of the granules after day 46 was due to changes in the microbial community structure and not by the reactor operation.

Microbial ecology dynamics of a partial nitritation bioreactor with Polar Arctic Circle activated sludge operating at low temperature

A lab-scale partial nitritation SBR was operated at 11 °C for 300 days used for the treatment of high-ammonium wastewater, which was inoculated with activated sludge from Rovaniemi WWTP (located in Polar Arctic Circle) in order to evaluate the influence the temperature on the performance, stability and dynamics of its microbial community. The partial nitritation achieved steady-state long-term operation and granulation process was not affected despite the low temperature and high ammonia concentration. The steady conditions were reached after 60 days of operation where the granular biomass was fully-formed and the 50%-50% of ammonium-nitrite effluent was successful achieved. Inoculation with cold adapted inoculum showed to yield bigger, denser granules with faster start-up without necessity of low temperature adaptation period. Next-generation sequences techniques showed that Trichosporonaceae and Xanthomonadaceae were the dominant OTUs in the mature granules. Our study could be useful in the implementation of full-scale partial nitritation reactors in cold regions such as Nordic countries for treating wastewater with high concentration of ammonium.

Novel contributions to the peritrich family Vaginicolidae (Protista: Ciliophora), with morphological and phylogenetic analyses of poorly known species of Pyxicola, Cothurnia and Vaginicola

The classification of loricate peritrich ciliates is difficult because of an accumulation of several taxonomic problems. In the present work, three poorly described vaginicolids, Pyxicola pusilla, Cothurnia ceramicola and Vaginicola tincta, were isolated from the surface of two freshwater/marine algae in China. In our study, the ciliature of Pyxicola and Vaginicola is revealed for the first time, demonstrating the taxonomic value of infundibular polykineties. The small subunit rDNA, ITS1-5.8S rDNA-ITS2 region and large subunit rDNA of the above species were sequenced for the first time. Phylogenetic analyses based on these genes indicated that Pyxicola and Cothurnia are closely related. The present study suggested that the loricate species probably represent a distinct lineage in peritrich evolution and both genera Cothurnia and Thuricola are monophyletic. Pyxicola pusilla, Cothurnia ceramicola and Vaginicola tincta are recircumscribed.

Organic loading rate (OLR) regulation for enhancement of aerobic sludge granulation: Role of key microorganism and their function

According to unique growth characteristics of various environmental microorganism specially with different substrates and their levels, aerobic sludge granulation are studied under different operation mode of influent organic loading rate (OLR), and the EPS component, sludge surface characters and functional microbes are analyzed to achieve a novel process for stable sludge granulation. Results showed that activated sludge cultivated under gradient influent OLR decreasing from 5.5 to 3.5 kgCOD m^-3 d^-1 achieved complete granulation with average size of 438 μm and exopolysaccharide (PS) to protein (PN) ratio over 2.0. Meanwhile, these granules had excellent flocculability and hydrophobicity with Zeta potential and contact angle of -15 mV and 110°, respectively. Principal component analysis (PCA) illustrated that microbes with function of EPS secretion enriched with decreased OLR regulation for their suitable specific growth characteristics, then promoted other microbes aggregation and sludge granulation along with the improvement of cellular surface characters and microbial niche.

Synergistic strengthening mechanism of hydraulic selection pressure and poly aluminum chloride (PAC) regulation on the aerobic sludge granulation

This study aimed to enhance aerobic granulation by the integration of hydraulic selection pressure (HSP) and poly aluminum chloride (PAC) regulation. Based on an investigation of sludge characteristics, microbial aggregation and extracellular polymeric substances (EPS) secretion, the synergistic mechanisms of HSP and PAC regulation were revealed. For granule formation, HSP primarily improved the cell hydrophobicity and extracellular protein production, while PAC regulation markedly neutralized the surface charge of cells and reduced the interaction energy between them. In addition, biomass retention was also facilitated by the PAC dosing. Notably, the results of total interaction energy and flocculating ability imply that prior HSP screening could significantly promote PAC regulation on microbial aggregation. To optimize the balance between granule formation and reactor performances, five kinds of integrated strategies for HSP and PAC regulation were conducted in batch test. According to the results, 4.3 g/L initial mixed liquor volatile suspended solids (MLVSS) was preferred before the addition of PAC.

Short operational differences support granulation in a lab scale reactor in comparison to another conventional activated sludge reactor

This study explains how small operational differences support excellent granulation in aerobic granular reactors. Short settling time promoted granulation in AGS reactor. Gene expressions based on mRNA revealed much higher ammonium monooxygenase (amoA) in conventional reactor biomass than in the aerobic granular reactor (AGS) biomass during a complete cycle operation. The number of glycogen accumulating organisms in conventional was much higher than in the granular reactor. The denitrifying functional genes in the granular systems were upregulated in anaerobic and aerobic phases. The granular reactor removed 1.84 kg COD-m^-3day^-1, 0.09 kg NH₄⁺-N-m^-3day^-1, and 0.063 kg PO₄^3-P-m^-3day^-1. The conventional reactor removed 1.14 Kg-m^-3day^-1 COD, 0.05 kg-m^-3day^-1 NH₄⁺-N, and 0.028 kg-m^-3day^-1 PO₄^3--P. The granular reactor showed faster kinetics for nutrient and organics removal compared to the conventional reactor. Flocs in the conventional reactor had a lower abundance of Candidatus accumulibacter sp. and higher relative abundance of Candidatus competibacter.

Impact of food-to-microorganisms ratio on the stability of aerobic granular sludge treating high-strength organic wastewater

This work investigated the long-term stability of aerobic granular sludge treating high-strength organic wastewater in a semi-pilot scale sequential batch reactor (SBR). The reactor was operated for 316 days under different operational conditions. It was found that the F/M ratio is an important parameter affecting granules formation and stability. Three selection mechanisms were investigated: (1) cultivation and maturation at moderately high influent COD concentration (2500 mg/L) followed by increase in influent COD concentration to 7500 mg/L; (2) stressed cultivation and operation at high influent COD concentration of 4500 mg/L; and (3) alternate feed loading strategy (variable influent COD concentration across the daily schedule of cycles at 50%, 75%, and 100% of the peak concentration of 5000 mg/L). It was found that adopting high OLR at the reactor start-up accelerated the formation of granules. However, the overgrowth of biomass under high organics concentration negatively affected the stability of granules and led to disintegration due to the presence of methanogens in the granule core. Cultivation at high organics concentration resulted in a rapid loss of microbial diversity and reactor failure. Under alternate feed loading, adequate selection of microbial community was maintained and resulted in stable reactor performance. Moreover, a strong correlation between F/M ratio and the granules settling ability was observed. When F/M ratio exceeded 1.5 gCOD/gSS.d, granules showed poor settleability and under very high sludge loading rates (above 2.5), sludge bulking occurred and led to washout of sludge due to the strong selection pressure of short settling time. Operating the reactor at F/M ratio of 0.5-1.4 gCOD/gSS.d appears to favor stable long-term granule stability.

Partial nitrification granular sludge reactor as a pretreatment for anaerobic ammonium oxidation (Anammox): Achievement, performance and microbial community

Partial nitrification granular sludge was successfully cultivated in a sequencing batch reactor as a pretreatment for anaerobic ammonium oxidation (Anammox) through shortening settling time. After 250-days operation, the effluent NH₄⁺-N and NO₂^--N concentrations were average at 277.5 and 280.5 mg/L with nitrite accumulation rate of 87.8%, making it as an ideal influent for Anammox. Simultaneous free ammonia (FA) and free nitrous acid (FNA) played major inhibitory roles on the activity of nitrite oxidizing bacteria (NOB). The MLSS and SVI₃₀ of partial nitrification reactor were 14.6 g/L and 25.0 mL/g, respectively. Polysaccharide (PS) and protein (PN) amounts in extracellular polymeric substances (EPS) from granular sludge were about 1.3 and 2.8 times higher than from seed sludge. High-throughput pyrosequencing results indicated that Nitrosomonas affiliated to the ammonia oxidizing bacteria (AOB) was the predominant group with a proportion of 24.1% in the partial nitrification system.

Pollutants degradation performance and microbial community structure of aerobic granular sludge systems using inoculums adapted at mild and low temperature

Three aerobic granular sequencing batch reactors were inoculated using different inocula from Finland, Spain and a mix of both in order to investigate the effect over the degradation performance and the microbial community structure. The Finnish inoculum achieved a faster granulation and a higher depollution performance within the first two month of operation. However, after 90 days of operation, similar physico-chemical values were observed. On the other hand, the Real-time PCR showed that Archaea diminished from inoculum to granular biomass, while Bacteria and Fungi numbers remained stable. All granular biomass massive parallel sequencing studies were similar regardless of the inocula from which they formed, as confirmed by singular value decomposition principal coordinates analysis, expected effect size of OTUs, and β-diversity analyses. Thermoproteaceae, Meganema and a Trischosporonaceae members were the dominant phylotypes for the three domains studied. The analysis of oligotype distribution demonstrated that a fungal oligotype was ubiquitous. The dominant OTUs of Bacteria were correlated with bioreactors performance. The results obtained determined that the microbial community structure of aerobic granular sludge was similar regardless of their inocula, showing that the granulation of biomass is related to several phylotypes. This will be of future importance for the implementation of aerobic granular sludge to full-scale systems.

Effect of graphene oxide on the bioactivities of nitrifying and denitrifying bacteria in aerobic granular sludge

With the widespread application of graphene oxide (GO), it would be inevitably released into wastewater treatment plants (WWTPs) and get involved in the biochemical process. So far, there are controversies on the effects of low GO concentration (0.05-0.1 g/L) on the nitrogen removal process. Therefore, this study essentially investigates any potential effects of GO on wastewater microbial communities functions. In present study, the nitrifying and denitrifying batch tests were introduced to investigate the influence of 0.06 g/L of GO on bacteria. The results showed that GO could be easily combined with the aerobic granular sludge (AGS), and NH₄⁺-N was sharply absorbed, which directly promoted the bioactivities of ammonium oxidizing bacteria (AOB) and nitrite oxidizing bacteria (NOB) and extracellular polymeric substances (EPS) production. The influence of GO on the denitrifying bacteria was negligible, which resulted in the stable EPS production. Furthermore, as inferred from the near maximum chemical reaction rates, there were no obvious changes on the microbial community functions during nitrogen removal process.

The divergence between fungal and bacterial communities in seasonal and spatial variations of wastewater treatment plants

In this study, quantitative PCR (qPCR) and high-throughput sequencing were used to simultaneously examine both bacteria and fungi across temporal and spatial scales in activated sludge from wastewater treatment plants (WWTPs). The ratio of fungi to bacteria was 0.43% on average after accounting for the multicopies in 16S rRNA gene (54.63%), indicating the number of fungi was far lower than bacteria in active sludge. The Miseq sequencing results revealed obvious seasonal and spatial variations in bacterial and fungal distribution patterns in WWTPs. Compared to bacteria, fungi showed a lower divergence in alpha and beta diversity, and exhibited less taxonomic diversity in both abundant and rare subcommunities at the class level, suggesting that the fungal community was less variable in this artificial ecosystem. Such variation of microbial communities was significantly correlated with geographical distance, DO, temperature, HRT, SRT, COD, TN and TP. In activated sludge, the main function of bacteria was chemoheterotrophy, fermentation, and nitrogen cycling processes, while the dominant functional guilds of fungi were saprotroph, animal pathogen, and animal endosymbiont. Moreover, both bacteria and fungi could play important roles in the degradation of toxicants, like hydrocarbon and aromatic compounds.

The mechanisms of granulation of activated sludge in wastewater treatment, its optimization, and impact on effluent quality

Granular activated sludge has gained increasing interest due to its potential in treating wastewater in a compact and efficient way. It is well-established that activated sludge can form granules under certain environmental conditions such as batch-wise operation with feast-famine feeding, high hydrodynamic shear forces, and short settling time which select for dense microbial aggregates. Aerobic granules with stable structure and functionality have been obtained with a range of different wastewaters seeded with different sources of sludge at different operational conditions, but the microbial communities developed differed substantially. In spite of this, granule instability occurs. In this review, the available literature on the mechanisms involved in granulation and how it affects the effluent quality is assessed with special attention given to the microbial interactions involved. To be able to optimize the process further, more knowledge is needed regarding the influence of microbial communities and their metabolism on granule stability and functionality. Studies performed at conditions similar to full-scale such as fluctuation in organic loading rate, hydrodynamic conditions, temperature, incoming particles, and feed water microorganisms need further investigations.

Microbial community structure and function in aerobic granular sludge

Aerobic granular sludge (AGS), a self-immobilized microbial consortium containing different functional microorganisms, is receiving growing attention, since it has shown great technological and economical potentials in the field of wastewater treatment. Microbial community is crucial for the formation, stability, and pollutant removal efficiency of aerobic granules. This mini-review systematically summarizes the recent findings of the microbial community structure and function of AGS and discusses the new research progress in the microbial community dynamics during the granulation process and spatial distribution patterns of the microbiota in AGS. The presented information may be helpful for the in-depth theoretical study and practical application of AGS technology in the future.

Do microbial communities in an anaerobic bioreactor change with continuous feeding sludge into a full-scale anaerobic digestion system?

Microbial communities of sludge samples from a full-scale anaerobic digestion (AD) fed with primary sludge (PS) and excess sludge (ES) were analyzed using qPCR and MiSeq. The results showed that the microbial composition of digested sludge remained relatively stable but was partially changed by microbial immigration from feeding sludge. The dominant archaea in the digested sludge were largely the same as those in the feeding sludge, but their abundances differed markedly. The dominant fungal genera in the digested sludge were different from those in PS but were similar to those in ES. Various differences in bacterial community differences between digested sludge and PS/ES were observed. Notably, this study is the first to suggest Verrucomicrobia is the predominant bacterial phylum in the digested sludge, and that numerous unreported microorganisms belonging to the order LD1-PB3 existed in this AD system and potentially played roles in the processes of hydrolysis, fermentation, and acetogenesis.

The role of inorganic nitrogen in successful formation of granular biofilms for wastewater treatment that support cyanobacteria and bacteria

Recently, the use of phototrophs for wastewater treatment has been revisited because of new approaches to separate them from effluent streams. One manifestation uses oxygenic photogranules (OPGs) which are dense, easily-settleable granular biofilms of cyanobacteria, which surrounding populations of heterotrophs, autotrophs, and microalgae. OPGs can remove COD and nitrogenous compounds without external aeration. To better grow and maintain biomass in the proposed wastewater process, this study seeks to understand the factors that contribute to successful granulation. Availability of initial inorganic nitrogen, particularly ammonium, was associated with successful cultivation of OPGs. In the first days of granulation, a decrease in ammonium coupled with an increase in a cyanobacterial-specific 16S rRNA gene, may suggest that ammonium was assimilated in cyanobacteria offering a competitive environment for growth. Though both successful and unsuccessful OPG formation demonstrated a shift from non-phototrophic bacterial dominated communities on day 0 to cyanobacterial dominated communities on day 42, the successful community had a greater relative abundance (46%) of OTUs associated with genera Oscillatoria and Geitlernema than the unsuccessful community (27%), supporting that filamentous cyanobacteria are essential for successful OPG formation. A greater concentration of chlorophyll b in the unsuccessful OPG formation suggested a greater abundance of algal species. This study offers indicators of granulation success, notably availability of inorganic nitrogen and chlorophyll a and b concentrations for monitoring the health and growth of biomass for a potential OPG process.

Bacterial community analysis of anoxic/aeration (A/O) system in a combined process for gibberellin wastewater treatment

Gibberellin wastewater cannot be directly discharged without treatment due to its high concentrations of sulfate and organic compounds and strong acidity. Therefore, multi-stage anaerobic bioreactor + micro-aerobic+ anoxic/aeration (A/O) + biological contact oxidation combined processes are used to treat gibberellin wastewater. However, knowledge of the treatment effects of the A/O process and bacterial community structure in the aeration tank reactors of such systems is sparse. Therefore, this study was conducted to investigate the treatment effects and operation of the A/O process on gibberellin wastewater, as well as changes in the bacterial community structure of activated sludge in the aeration tank during treatment. Moreover, removal was examined based on evaluation of effluent after A/O treatment. Although influent chemical oxygen demand (COD), NH₃-N and total phosphorus (TP) fluctuated, effluent COD, NH₃-N and TP remained stable. Moreover, average COD, NH₃-N and TP removal efficiency were 68.41%, 93.67% and 45.82%, respectively, during the A/O process. At the phylum level, Proteobacteria was the dominant phylum in all samples, followed by Chloroflexi, Bacteroidetes and Actinobacteria. Proteobacteria played an important role in the removal of organic matter. Chloroflexi was found to be responsible for the degradation of carbohydrates and Bacteroidetes also had been found to be responsible for the degradation of complex organic matters. Actinobacteria are able to degrade a variety of environmental chemicals. Additionally, Anaerolineaceae_uncultured was the major genus in samples collected on May 25, 2015, while Novosphingobium and Nitrospira were dominant in most samples. Nitrosomonas are regarded as the dominant ammonia-oxidizing bacteria, while Nitrospira are the main nitrite-oxidizing bacteria. Bacterial community structure varied considerably with time, and a partial Mantel test showed a highly significant positive correlation between bacterial community structure and DO. The bacterial community structure was also positively correlated with temperature and SO₄^2-.

The acid soluble extracellular polymeric substance of aerobic granular sludge dominated by Defluviicoccus sp

A new acid soluble extracellular polymeric substance (acid soluble EPS) was extracted from an acetate fed aerobic granular sludge reactor operated at 35 °C. Acid soluble EPS dominated granules exhibited a remarkable and distinctive tangled tubular morphology. These granules are dominated by Defluviicoccus Cluster II organisms. Acetic acid instead of the usually required alkaline extraction medium was needed to dissolve the granules and solubilise the polymeric matrix. The extracted acid soluble EPS was analysed and identified using various instrumental analysis including ¹H and ¹³C Nuclear Magnetic Resonance, Fourier Transform Infrared Spectroscopy and Raman spectroscopy. In addition, the glycoconjugates were characterized by fluorescence lectin-binding analysis. The acid soluble EPS is α-(1 → 4) linked polysaccharide, containing both glucose and galactose as monomers. There are OCH₃ groups connected to the glucose monomer. Transmission and scanning electron microscopy (TEM, SEM) as well as confocal laser scanning microscopy (CLSM) showed that the acid soluble EPS was present as a tightly bound capsular EPS around bacterial cells ordered into a sarcinae-like growth pattern. The special granule morphology is decided by the acid soluble EPS produced by Defluviicoccus Cluster II organisms. This work shows that no single one method can be used to extract all possible extracellular polymeric substances. Results obtained here can support the elucidation of biofilm formation and structure in future research.

Comparison of the bacterial community composition in the granular and the suspended phase of sequencing batch reactors

Granulation of activated sludge is an increasingly important area within the field of wastewater treatment. Granulation is usually achieved by high hydraulic selection pressure, which results in the wash-out of slow settling particles. The effect of the harsh wash-out conditions on the granular sludge ecosystem is not yet fully understood, but different bacterial groups may be affected to varying degrees. In this study, we used high-throughput amplicon sequencing to follow the community composition in granular sludge reactors for 12 weeks, both in the granular phase and the suspended phase (effluent). The microbiome of the washed out biomass was similar but not identical to the microbiome of the granular biomass. Certain taxa (e.g. Flavobacterium spp. and Bdellovibrio spp.) had significantly (p < 0.05) higher relative abundance in the granules compared to the effluent. Fluorescence in situ hybridization images indicated that these taxa were mainly located in the interior of granules and therefore protected from erosion. Other taxa (e.g. Meganema sp. and Zooglea sp.) had significantly lower relative abundance in the granules compared to the effluent, and appeared to be mainly located on the surface of granules and therefore subject to erosion. Despite being washed out, these taxa were among the most abundant members of the granular sludge communities and were likely growing fast in the reactors. The ratio between relative abundance in the granular biomass and in the effluent did not predict temporal variation of the taxa in the reactors, but it did appear to predict the spatial location of the taxa in the granules.

Start-up and operation of an aerobic granular sludge system under low working temperature inoculated with cold-adapted activated sludge from Finland

An aerobic granular sludge system has been started-up and operated at 7°C temperature using cold-adapted activated sludge as inoculum. The system could form granular biomass due to batch operation allowing for just 5-3min of biomass sedimentation. Scanning electron microscopy showed that fungi helped in the granular biomass formation in the early stages of the granule formation. The removal performance of the system was of 92-95% in BOD5, 75-80% in COD, 70-76% in total nitrogen and 50-60% in total phosphorous. The bacterial community structure from cold-adapted activated sludge changed during the operational time, leading to a final configuration dominated by Microbacteriaceae members Microbacterium and Leucobacter, which were strongly correlated to biomass settling velocity and bioreactor performance, as suggested by multivariate redundancy analyses. This experiment showed that aerobic granular sludge systems could be successfully started-up and operated, with high performance, under low operational temperatures when using cold-adapted biomass as inoculum.

Predation by Bdellovibrio bacteriovorus significantly reduces viability and alters the microbial community composition of activated sludge flocs and granules

We recently isolated and characterised a predatory Bdellovibrio bacteriovorus strain from activated sludge (Ulu Pandan Water Reclamation Plant, Singapore), and this strain, B. bacteriovorus UP, was able to prey upon a broad spectrum of bacterial isolates from the activated sludge when grown as planktonic cells or as biofilms. Here, we have tested the effect of Bdellovibrio predation on floccular and granular sludge to determine if the spatial organisation, loosely or tightly aggregated communities, was protective from predation. The effect of predation was assessed using a combination of biomass quantification, cellular activity measurement and microscopic image analysis to determine community viability. Additionally, changes in the microbial communities due to predation by B. bacteriovorus UP were analysed through total RNA sequencing. Predation led to a significant reduction in microbial activity and total biomass for both floccular and granular sludge communities. Predation was also associated with significant changes in the microbial community composition in both communities, with >90% of the community members reduced in relative abundance after 24 h. Of those community members, the dominant organisms, such as Proteobacteria and Bacteroidetes, were the most affected phylotypes. This suggests that predatory bacteria, which display indiscriminant feeding, could significantly shift the species composition and thus, may disturb the operational performance of wastewater treatment systems.

Microbial Population Dynamics and Ecosystem Functions of Anoxic/Aerobic Granular Sludge in Sequencing Batch Reactors Operated at Different Organic Loading Rates

The granular sludge process is an effective, low-footprint alternative to conventional activated sludge wastewater treatment. The architecture of the microbial granules allows the co-existence of different functional groups, e.g., nitrifying and denitrifying communities, which permits compact reactor design. However, little is known about the factors influencing community assembly in granular sludge, such as the effects of reactor operation strategies and influent wastewater composition. Here, we analyze the development of the microbiomes in parallel laboratory-scale anoxic/aerobic granular sludge reactors operated at low (0.9 kg m^-3d^-1), moderate (1.9 kg m^-3d^-1) and high (3.7 kg m^-3d^-1) organic loading rates (OLRs) and the same ammonium loading rate (0.2 kg NH₄-N m^-3d^-1) for 84 days. Complete removal of organic carbon and ammonium was achieved in all three reactors after start-up, while the nitrogen removal (denitrification) efficiency increased with the OLR: 0% at low, 38% at moderate, and 66% at high loading rate. The bacterial communities at different loading rates diverged rapidly after start-up and showed less than 50% similarity after 6 days, and below 40% similarity after 84 days. The three reactor microbiomes were dominated by different genera (mainly Meganema, Thauera, Paracoccus, and Zoogloea), but these genera have similar ecosystem functions of EPS production, denitrification and polyhydroxyalkanoate (PHA) storage. Many less abundant but persistent taxa were also detected within these functional groups. The bacterial communities were functionally redundant irrespective of the loading rate applied. At steady-state reactor operation, the identity of the core community members was rather stable, but their relative abundances changed considerably over time. Furthermore, nitrifying bacteria were low in relative abundance and diversity in all reactors, despite their large contribution to nitrogen turnover. The results suggest that the OLR has considerable impact on the composition of the granular sludge communities, but also that the granule communities can be dynamic even at steady-state reactor operation due to high functional redundancy of several key guilds. Knowledge about microbial diversity with specific functional guilds under different operating conditions can be important for engineers to predict the stability of reactor functions during the start-up and continued reactor operation.

Study of the effect of the bacterial and fungal communities present in real wastewater effluents on the performance of fungal treatments

The use of the ligninolytic fungi Trametes versicolor for the degradation of micropollutants has been widely studied. However, few studies have addressed the treatment of real wastewater containing pharmaceutically active compounds (PhAC) under non-sterile conditions. The main drawback of performing such treatments is the difficulty for the inoculated fungus to successfully compete with the other microorganisms growing in the bioreactor. In the present study, several fungal treatments were performed under non-sterile conditions in continuous operational mode with two types of real wastewater effluent, namely, a reverse osmosis concentrate (ROC) from a wastewater treatment plant and a veterinary hospital wastewater (VHW). In all cases, the setup consisted of two parallel reactors: one inoculated with T. versicolor and one non-inoculated, which was used as the control. The main objective of this work was to correlate the operational conditions and traditional monitoring parameters, such as laccase activity, with PhAC removal and the composition of the microbial communities developed inside the bioreactors. For that purpose a variety of biochemical and molecular biology analyses were performed: phospholipid fatty acids analysis (PLFA), quantitative PCR (qPCR) and denaturing gradient gel electrophoresis (DGGE) followed by sequencing. The results show that many indigenous fungi (and not only bacteria, which were the focus of the majority of previously published research) can successfully compete with the inoculated fungi (i.e., Trichoderma asperellum overtook T. versicolor in the ROC treatment). We also showed that the wastewater origin and the operational conditions had a stronger impact on the diversity of microbial communities developed in the bioreactors than the inoculation or not with T. versicolor.

Impact of methionine on a partial-nitritation biofilter

It has been demonstrated that an anaerobic digestion process cannot attain an efficient removal of several amino acids, with methionine being one of the most persistent of these. Thus, the effect that methionine amino acid has over the partial-nitritation process with fixed-biofilm configuration in terms of performance and bacterial community dynamics has been investigated. With respect to the performance with no addition, 100 mg/L methionine loading decreased ammonium oxidation efficiency in 60% and 100% at concentrations of 300 and 500 mg/L methionine, respectively. Bacterial biomass sharply increased by 30, 65, and 230% with the addition of 100, 300, and 500 mg/L methionine, respectively. Bacterial community analysis showed that methionine addition supported the proliferation of a diversity of heterotrophic genera, such as Lysobacter and Micavibrio, and reduced the relative abundance of ammonium oxidizing genus Nitrosomonas. This research shows that the addition of methionine affects the performance of the partial-nitritation process. In this sense, amino acids can pose a threat for the of partial-nitritation process treating anaerobic digester supernatant at full-scale implementation.