Biochemical Characterization of the Lactobacillus reuteri Glycoside Hydrolase Family 70 GTFB Type of 4,6-α-Glucanotransferase Enzymes That Synthesize Soluble Dietary Starch Fibers

Structural elucidation and functional characteristics of novel potential prebiotics produced from Limosilactobacillus reuteri N1 GtfB-treated maize starches

The recently characterized Limosilactobacillus reuteri N1 GtfB (LrN1 GtfB) from glycoside hydrolase family 70 is a novel 4,6-α-glucanotransferase acting on starch/maltooligosaccharides with high enzyme activity and soluble protein yield (in heterogenous system). In this study, the influence of the treatment by LrN1 GtfB on the fine structure and functional characteristics of three maize starches were furtherly investigated and elucidated. Due to the treatment of LrN1 GtfB, the starch molecules were transformed into reuterans containing linear and branched (α1 → 6) linkages with notably smaller molecular weight and shorter chain length. Moreover, the (α1 → 6) linkage ratios in the GtfB-modified high-amylose maize starch (GHMS)/normal maize starch (GNMS)/waxy maize starch (GWMS) increased by 18.3 %/12.6 %/9.0 % as compared to their corresponding controls. In vitro digestibility experiment revealed that the resistant starch content of GHMS, GNMS and GWMS increased by 16 %, 18 % and 25 % as compared to the starch substrates. Furthermore, the butyric acid yielded from GHMS, GNMS and GWMS in the in vitro fermentation experiments were 1.4, 1.5 and 1.4 times higher than those of commercial galactose oligosaccharides. These results indicated that the highly-branched short-clustered reuteran synthesized by LrN1 GtfB might serve as novel potential prebiotics, and provide insights for the synthesis of promising prebiotic dietary fiber from starch.

Insights into the catalytic properties of 4,3-α-glucanotransferase to guide the biofabrication of α-glucans with low digestibility

The effect of the starch chain structure on 4,3-α-glucanotransferase's (4,3-α-GTase) catalytic properties was investigated to modulate the digestibility of starch. Three starches with diverse amylose contents were used, and the enzymatic kinetic reaction of 4,3-α-GTase was fitted using the Michaelis-Menten equation. The results revealed that the linear substrate was more suitable for modification by 4,3-α-GTase. Linear starch chains were then selected with various degrees of polymerization (DP) as substrates of 4,3-α-GTase modification. Additionally, the structures and in vitro digestion of 4,3-α-GTase derived α-glucans were studied. The results showed that enzyme catalysis increased the amount of α-1,3 glycosidic linkages in products (highest 33.5%), the digestibility of 4,3-α-GTase derived α-glucans conformed to a first-order two-phase equation, and the equilibrium digestibility was controlled between 43.2-72.1%. It was observed that the structure of α-glucans could be managed to attain low digestibilities (43.2%) by selecting maltodextrin with DE 2 as the substrate. These findings offer valuable insights into the fabrication of α-glucans and their potential applications in various fields.

Replacement of Loops at the Entrance of the Active Pocket of Streptococcus thermophilus 4,6-α-Glucanotransferase Changes Its Catalytic Activity and Product Specificity

To explore the roles of loops around active pocket in the reuteran type 4,6-α-glucanotransferase (StGtfB) from S. thermophilus, they were individually or simultaneously replaced with those of an isomalto/maltopolysaccharides type 4,6-α-glucanotransferase from L. reuteri. StGtfB with the replaced loops A1, A2 (A1A2) and A1, A2, B (A1A2B), respectively, showed 1.41- and 0.83-fold activities of StGtfB. Two mutants reduced crystallinity and increased starch disorder at 2, 4, and 8 U/g more than StGtfB and increased DP ≤ 5 short branches of starch by 38.01% at 2 U/g, much more than StGtfB by 4.24%. A1A2B modified starches had the lowest retrogradation over 14 days. A1A2 modified starches had the highest percentage of slowly digestible fractions, ranging from 40.32% to 43.34%. StGtfB and its mutants bind substrates by hydrogen bonding and van der Waals forces at their nonidentical amino acid residues, suggesting that loop replacement leads to a different conformation and changes activity and product structure.

Tailor-Made α-Glucans by Engineering the Processivity of α-Glucanotransferases via Tunnel-Cleft Active Center Interconversions

The function of polysaccharides is intimately associated with their size, which is largely determined by the processivity of transferases responsible for their synthesis. A tunnel active center architecture has been recognized as a key factor that governs processivity of several glycoside hydrolases (GHs), e.g., cellulases and chitinases. Similar tunnel architecture is also observed in the Limosilactobacillus reuteri 121 GtfB (Lr121 GtfB) α-glucanotransferase from the GH70 family. The molecular element underpinning processivity of these transglucosylases remains underexplored. Here, we report the synthesis of the smallest (α1 → 4)-α-glucan interspersed with linear and branched (α1 → 6) linkages by a novel 4,6-α-glucanotransferase from L. reuteri N1 (LrN1 GtfB) with an open-clefted active center instead of the tunnel structure. Notably, the loop swapping engineering of LrN1 GtfB and Lr121 GtfB based on their crystal structures clarified the impact of the loop-mediated tunnel/cleft structure at the donor subsites -2 to -3 on processivity of these α-glucanotransferases, enabling the tailoring of both product sizes and substrate preferences. This study provides unprecedented insights into the processivity determinants and evolutionary diversification of GH70 α-glucanotransferases and offers a simple route for engineering starch-converting α-glucanotransferases to generate diverse α-glucans for different biotechnological applications.

Identification of a novel starch-converting GtfB enzyme from the Fructilactobacillus sanfranciscensis TMW11304 to reduce the viscoelasticity and retrogradation of tapioca starch

Starch-converting α-glucanotransferases are efficient enzymatic toolkits for the biosynthesis of diverse α-glucans, which hold vast application potential in the food industry. In this work, we identified a novel GtfB protein from Fructilactobacillus sanfranciscensis TMW11304 (FsTMW11304 GtfB) in NCBI. Although this enzyme was highly conserved in motifs I-IV with those isomalto-maltopolysaccharides (IMMPs)-producing GtfB α-glucanotransferases, it possessed distinct deletions and mutations in two crucial loops shaping the active site. Hence, unlike those GtfB enzymes, FsTMW11304 GtfB not only exhibited excellent 4,6-α-glucanotransferase activity on amylose to generate atypically low-molecular-weight IMMPs with consecutive linear (α1 → 6) linkages up to 48 %, but also held good capability towards branched substrates. Besides, compared with the control, the treatment by FsTMW11304 GtfB reduced the storage/loss modulus of granular and gelatinized tapioca starches (TS) by 12.0 %/17.9 % and 91.4 %/82.9 %, respectively, indicating that the rigidity of the gel structure was attenuated to different degrees in the two reaction systems. Furthermore, the setback viscosity observed in the gelatinized TS modified by FsTMW11304 GtfB was only 5 % of that observed in the control group, suggesting the short-term anti-retrogradation property has been substantially improved. Thus, FsTMW11304 GtfB represents a meaningful addition to the α-glucanotransferases in GH70 family, which expands the repertoire of diverse α-glucans synthesized from starch and facilitates the understanding of the structure-function relationship of the GtfB α-glucanotransferases.

N1019D Mutant of Limosilactobacillus reuteri 121 4,6-α-Glucanotransferase GtfB Significantly Improved Catalytic Activity

Limosilactobacillus reuteri 121 4,6-α-glucanotransferase GtfB (Lr 121 GtfB), belonging to glycoside hydrolase family 70 (GH70), synthesizes linear isomalto/malto polysaccharides having (α1→6) linkages attached to the nonreducing ends of (α1→4) linked maltose oligosaccharide segments using starch or maltodextrin as a substrate. Since Lr 121 GtfB has low catalytic activity and efficiency, it leads to substrate regeneration and reduced substrate utilization. In this study, we superimposed the crystal structure of Lr 121 GtfB-ΔNΔV with that of L. reuteri NCC 2613 GtfB-ΔNΔV (Lr 2613 GtfB-ΔNΔV) to identify the acceptor binding subsites +1 to +3 and constructed five single-residue mutants and a random mutagenesis of N1019. Compared with the wild-type, N1019D Lr 121 GtfB-ΔN did not alter the product specificity, increased the catalytic activity and efficiency by 420 and 590%, respectively, and maintained >80% relative activity in the pH 3.5-6.5 interval. The findings will contribute to the industrial application of Lr 121 GtfB and provide new solutions for starch synthesis of higher value derivatives.

Insights into the Structure-Function Relationship of GH70 GtfB α-Glucanotransferases from the Crystal Structure and Molecular Dynamic Simulation of a Newly Characterized Limosilactobacillus reuteri N1 GtfB Enzyme

α-Glucanotransferases of the CAZy family GH70 convert starch-derived donors to industrially important α-glucans. Here, we describe characteristics of a novel GtfB-type 4,6-α-glucanotransferase of high enzyme activity (60.8 U mg-1) from Limosilactobacillus reuteri N1 (LrN1 GtfB), which produces surprisingly large quantities of soluble protein in heterologous expression (173 mg pure protein per L of culture) and synthesizes the reuteran-like α-glucan with (α1 → 6) linkages in linear chains and branch points. Protein structural analysis of LrN1 GtfB revealed the potential crucial residues at subsites -2∼+2, particularly H265, Y214, and R302, in the active center as well as previously unidentified surface binding sites. Furthermore, molecular dynamic simulations have provided unprecedented insights into linkage specificity hallmarks of the enzyme. Therefore, LrN1 GtfB represents a potent enzymatic tool for starch conversion, and this study promotes our knowledge on the structure-function relationship of GH70 GtfB α-glucanotransferases, which might facilitate the production of tailored α-glucans by enzyme engineering in future.

Exploring a GtfB-Type 4,6-α-Glucanotransferase to Synthesize the (α1 → 6) Linkages in Linear Chain and Branching Points from Amylose and Enhance the Functional Property of Granular Corn Starches

Starch-converting α-glucanotransferases of glycoside hydrolase family 70 (GH70) are promising enzymatic tools for the production of diverse α-glucans with (potential) commercial applications in food and health and as biomaterials. In this study, a novel GtfB enzyme from Weissella confusa MBF8-1 was screened in the National Center for Biotechnology Information (NCBI) nonredundant protein database. The enzyme (named WcMBF8-1 GtfB) displayed high conservation in motifs I-IV with other GtfB enzymes but possessed unique variations in several substrate-binding residues. Structural characterizations of its α-glucan products revealed that WcMBF8-1 GtfB exhibited an atypical 4,6-α-glucanotransferase activity and was capable of catalyzing, by cleaving off (α1 → 4)-linkages in starch-like substrates and the synthesis of linear (α1 → 6) linkages and (α1 → 4,6) branching points. The product specificity enlarges the diversity of α-glucans and facilitates recognition of the determinants of the linkage specificity in GtfB enzymes. Furthermore, the contents of slowly digestible starch and resistant starch of granular corn starches, modified by WcMBF8-1 GtfB, increased by 6.7%, which suggested the potential value for the utilization of WcMBF8-1 GtfB to prepare "clean-label" starch ingredients with improved functional attributes.

Optimization of 4,6-α and 4,3-α-Glucanotransferase Production in Lactococcus lactis and Determination of Their Effects on Some Quality Characteristics of Bakery Products

In this study, the production of 4,6-α (4,6-α-GTase) and 4,3-α-glucanotransferase (4,3-α-GTase), expressed previously in Lactococcus lactis, was optimized and these enzymes were used to investigate glycemic index reduction and staling delay in bakery products. HP-SEC analysis showed that the relevant enzymes were able to produce oligosaccharides from potato starch or malto-oligosaccharides. Response Surface Methodology (RSM) was used to optimize enzyme synthesis and the highest enzyme activities of 15.63 ± 1.65 and 19.01 ± 1.75 U/mL were obtained at 1% glucose, pH 6, and 30 °C for 4,6-α-GTase and 4,3-α-GTase enzymes, respectively. SEM analysis showed that both enzymes reduced the size of the starch granules. These enzymes were purified by ultrafiltration and used to produce bread and bun at an enzyme activity of 4 U/g, resulting in a decrease in the specific volume of the bread. It was found that the estimated glycemic index (eGI) of bread formulated with 4,6-α-GTase decreased by 18.01%, and the eGI of bread prepared with 4,3-α-GTase decreased by 13.61%, indicating a potential delay in staling. No significant differences were observed in the sensory properties of the bakery products. This is the first study showing that 4,6-α-GTase and 4,3-α-GTase enzymes have potential in increasing health benefits and improving technological aspects regarding bakery products.

Sequential starch modification by branching enzyme and 4-α-glucanotransferase improves retention of curcumin in starch-alginate beads

A new super-branched amylopectin with longer exterior chains was produced from normal maize starch by modification with branching enzyme followed by 4-α-glucanotransferase, and applied for co-entrapment of a curcumin-loaded emulsion in alginate beads. The network structure of the gel beads was obtained with Ca2+-cross-linked alginate and a modest load of retrograded starch. The dual enzyme modified starch contained more and longer α-1,6-linked branch chains than single enzyme modified and unmodified starches and showed superior resistance to digestive enzymes. Alginate beads with or without starch were of similar size (1.69-1.74 mm), but curcumin retention was improved 1.4-2.8-fold in the presence of different starches. Thus, subjecting the curcumin-loaded beads to in vitro simulated gastrointestinal digestion resulted in retention of 70, 43 and 22 % of the curcumin entrapped in the presence of modified, unmodified, or no starch, respectively. Molecular docking provided support for curcumin interacting with starch via hydrogen bonding, hydrophobic contacts and π-π stacking. The study highlights the potential of utilizing low concentration of dual-enzyme modified starch with alginate to create a versatile vehicle for controlled release and targeted delivery of bioactive compounds.

Differentiated digestion resistance and physicochemical properties of linear and α-1,2/α-1,3 branched isomaltodextrins prepared by 4,6-α-glucanotransferase and branching sucrases

Isomaltodextrins (IMDs) are starch-based dietary fibers (DF) prepared enzymatically, which show great potential as a functional food ingredient. In this study, a series of novel IMDs with diverse structures were generated by 4,6-α-glucanotransferase GtfBΔN from Limosilactobacillus fermentum NCC 3057, combined with two α-1,2 and α-1,3 branching sucrases. Results indicated that α-1,2 and α-1,3 branching significantly improved the DF contents of α-1,6 linear products up to 60.9-62.8%. When altering the ratios of [sucrose]/[maltodextrin], IMDs containing 25.8-89.0% α-1,6 bonds, 0-59.6% α-1,2 bonds and 0-35.1% α-1,3 bonds and Mw ranged from 1967 to 4876 Da were obtained. Physicochemical property analysis showed that grafting with α-1,2 or α-1,3 single glycosyl branches can improve the solubility of the α-1,6 linear product, in which α-1,3 branched products were better. Moreover, α-1,2 or α-1,3 branching did no effect on the viscosity of the products but Mw did, the larger Mw the greater viscosity. In addition, α-1,6 linear and α-1,2 or α-1,3 branched IMDs all exhibited strong acid-heating stabilities, freeze-thaw stabilities, and good resistance to browning caused by the Maillard reaction. Branched IMDs showed excellent storage stabilities at room temperature for one year at a concentration of 60%, whereas 45% α-1,6 linear IMD precipitated quickly within 12 h. Most importantly, α-1,2 or α-1,3 branching remarkably increased the contents of resistant starch in the α-1,6 linear IMDs to 74.5-76.8%. These clear qualitative assessments demonstrated the outstanding processing and application properties of the branched IMDs and were expected to provide valuable perspectives toward the technological innovation of functional carbohydrates.

Cost-effective and controllable synthesis of isomalto/malto-polysaccharides from β-cyclodextrin by combined action of cyclodextrinase and 4,6-α-glucanotransferase GtfB

Isomalto/malto-polysaccharides (IMMPs) derived from malto-oligosaccharides such as maltoheptaose (G7) are elongated non-branched gluco-oligosaccharides produced by 4,6-α-glucanotransferase (GtfB). However, G7 is expensive and cumbersome to produce commercially. In this study, a cost-effective enzymatic process for IMMPs synthesis is developed that utilizes the combined action of cyclodextrinase from Palaeococcus pacificus (PpCD) and GtfB-ΔN from Limosilactobacillus reuteri 121 to convert β-cyclodextrin into IMMPs with a maximum yield (16.19 %, w/w). The purified IMMPs synthesized by simultaneous or sequential treatments, designated as IMMP-Sim and IMMP-Seq, possess relatively high contents of α-(1 → 6) glucosidic linkages. By controlling the release of G7 and smaller malto-oligosaccharides by PpCD, IMMP-Seq was obtained of DP varying from 12.9 to 29.5. Enzymatic fingerprinting revealed different linkage-type distribution of α-(1 → 6) linked segments with α-(1 → 4) segments embedded at the reducing end and middle part. The proportion of α-(1 → 6) segments containing the non-reducing end was 56.76 % for IMMP-Sim but 28.98 % for IMMP-Seq. Addition of G3 or G4 as specific acceptors resulted in IMMPs exhibiting low polydispersity. This procedure can be applied as a novel bioprocess that does not require costy high-purity malto-oligosaccharides and with control of the average DP of IMMPs by adjusting the substrate composition.

Structural characterization of potato starch modified by a 4,6-α-glucanotransferase B from Lactobacillus reuteri E81

The recent reports have revealed that increase in amount of α-1,6 linkages by modification of potato starch with enzyme (glycosyltransferases) treatment gains slowly digestible properties to the starch; however, the formation of new α-1,6-glycosidic linkages diminish the thermal resistance of the starch granules. In this study, a putative GtfB-E81, (a 4,6-α-glucanotransferase-4,6-αGT) from L. reuteri E81 was firstly used to produce a short length of α-1,6 linkages. NMR results revealed that external short chains mostly comprised of 1-6 glucosyl units were newly produced in potato starch, and the α-1,6 linkage ratio was significantly increased from 2.9 % to 36.8 %, suggesting that this novel GtfB-E81 might have potentially an efficient transferase activity. In our study, native and GtfB-E81 modified starches showed fundamental similarities with respect to their molecular properties and treatment of native potato starch with GtfB-E81 did not remarkably change thermal stability of the potato starch, which seems to be very prominent for the food industry given the significantly decreased thermal stability results obtained for the enzyme modified starches reported in the literature. Therefore, the results of this study should open up emerging perspectives for regulating slowly digestible characteristics of potato starch in future studies without a significant change in the molecular, thermal, and crystallographic properties.

Exploring the roles of amylopectin in starch modification with Limosilactobacillus reuteri 121 4,6-α-glucanotransferase via developed methods

Limosilactobacillus reuteri 121 4,6-α-glucanotransferase (GtfBΔN) modifies starch by cleaving (α1 → 4) linkages and introducing non-branched (α1 → 6) linkages to produce functional starch derivatives. Research has mainly focused on GtfBΔN converting amylose (linear substrate), whereas the conversion of amylopectin (branched substrate) has not been studied in detail. In this study, we used GtfBΔN to understand amylopectin modification and performed a set of experiments to analyze this modification pattern. The donor substrates were segments from the non-reducing ends to the nearest branch point in amylopectin as shown from the results of the chain length distribution of GtfBΔN-modified starches. Decreased and increased contents of β-limit dextrin and reducing sugars, respectively, during the incubation of β-limit dextrin with GtfBΔN indicated that the segments from the reducing end to the nearest branch point in amylopectin act as donor substrates. Dextranase was involved in the hydrolysis of the GtfBΔN conversion products of three different substrates groups, maltohexaose (G6), amylopectin, and G6 plus amylopectin. No reducing sugars were detected, therefore, amylopectin was not used as an acceptor substrate, and no non-branched (α1 → 6) linkages were introduced into it. Thus, these methods provide a reasonable and effective approach to studying GtfB-like 4,6-α-glucanotransferase in analyzing the roles and contribution of branched substrates.

Multiple approaches of loop region modification for thermostability improvement of 4,6-α-glucanotransferase from Limosilactobacillus fermentum NCC 3057

4,6-α-glucanotransferase (4,6-α-GT), as a member of the glycoside hydrolase 70 (GH70) family, converts starch/maltooligosaccharides into α,1-6 bond-containing α-glucan and possesses potential applications in food, medical and related industries but does not satisfy the high-temperature requirement due to its poor thermostability. In this study, a 4,6-α-GT (ΔGtfB) from Limosilactobacillus fermentum NCC 3057 was used as a model enzyme to improve its thermostability. The loops of ΔGtfB as the target region were optimized using directed evolution, sequence alignment, and computer-aided design. A total of 11 positive mutants were obtained and iteratively combined to obtain a combined mutant CM9, with high resistance to temperature (50 °C). The activity of mutant CM9 was 2.08-fold the activity of the wild type, accompanied by a 5 °C higher optimal temperature, a 5.76 °C higher melting point (T_m, 59.46 °C), and an 11.95-fold longer half-life time (t_1/2). The results showed that most of the polar residues in the loop region of ΔGtfB are mutated into rigid proline residues. Molecular dynamics simulation demonstrated that the root mean square fluctuation of CM9 significantly decreased by "Breathing" movement reduction of the loop region. This study provides a new strategy for improving the thermostability of 4,6-α-GT through rational loop region modification.

Biofabrication, structure, and functional characteristics of a reuteran-like glucan with low digestibility

A novel reuteran-like glucan with low digestibility was fabricated using microbial glucanotransferase (GTase) treated maltodextrin. For GTase treated maltodextrin with DE 6, the molecular weight of reuteran-like glucan increased from 8.35 × 10⁴ to 5.14 × 10⁶ g/mol in the initial 6 h, increasing to 1.47 × 10⁷ g/mol at 72 h. The short chain fraction (DP 3-12) of reuteran-like glucan increased from 45.2 % to 100.0 %, accompanied by an increase in α-1,6 glycosidic linkage percentage from 3.9 % to 33.3 %. This reaction promoted rearrangements in glycosidic chains, leading to a substantial increase in resistant starch content (13.4 % to 37.4 %) in the reuteran-like glucan. During in vitro fecal fermentation for 48 h, the reuteran-like glucan yielded large amounts of short-chain fatty acids (212.33 mM), especially butyric acid (12.64 mM). Thus, reuteran-like glucan could be used as a low-digestible and highly fermentable fiber for controlling blood glucose levels and prebiotic potential.

Extracellular recombinant production of 4,6 and 4,3 α-glucanotransferases in Lactococcus lactis

4,6 α-Glucanotransferase (4,6-α-GTase) and 4,3 α-glucanotransferases (4,3-α-GTase) produced by Lactic Acid Bacteria (LAB) in the GH70 enzyme family have become important due to their catalytic effect on starch and maltodextrins. Their high level of production is necessary for their application at industrial scale. In this respect, both enzymes were expressed extracellularly using Lactococcus lactis as GRAS host. 4,6-α-GTase and 4,3-α-GTase genes from Limosilactobacillus reuteri E81 and Limosilactobacillus fermentum PFC282 respectively were transformed into the plasmid pLEB124 vector having the signal peptide usp45 under the P45 continuous promoter and successfully expressed in Lactococcus lactis MG1363. Western blot screening showed that the relevant enzymes were able to be successfully secreted extracellularly. The Vmax and Km of 4,6-α-GTase were 2.58 µmol min-1 and 0054 mg min-1 whereas 3369 µmol min-1 and 0032 mg min-1 for 4,3-α-GTase respectively. NMR analysis demonstrated the formation of new bonds within the corresponding enzymes. Also, both enzymes were active on maltose, maltoheptaose, maltohexaose and starch and produced malto-oligosaccarides observed by TLC analysis. In conclusion, this study demonstrated first time the extracellular production of 4,6-α-GTase and 4,3-α-GTase with GRAS status that can be useful for starch retrogradation delay and glycaemic index reduction.

Impact of Starch Binding Domain Fusion on Activities and Starch Product Structure of 4-α-Glucanotransferase

A broad range of enzymes are used to modify starch for various applications. Here, a thermophilic 4-α-glucanotransferase from Thermoproteus uzoniensis (TuαGT) is engineered by N-terminal fusion of the starch binding domains (SBDs) of carbohydrate binding module family 20 (CBM20) to enhance its affinity for granular starch. The SBDs are N-terminal tandem domains (SBD_St1 and SBD_St2) from Solanum tuberosum disproportionating enzyme 2 (StDPE2) and the C-terminal domain (SBD_GA) of glucoamylase from Aspergillus niger (AnGA). In silico analysis of CBM20s revealed that SBD_GA and copies one and two of GH77 DPE2s belong to well separated clusters in the evolutionary tree; the second copies being more closely related to non-CAZyme CBM20s. The activity of SBD-TuαGT fusions increased 1.2-2.4-fold on amylose and decreased 3-9 fold on maltotriose compared with TuαGT. The fusions showed similar disproportionation activity on gelatinised normal maize starch (NMS). Notably, hydrolytic activity was 1.3-1.7-fold elevated for the fusions leading to a reduced molecule weight and higher α-1,6/α-1,4-linkage ratio of the modified starch. Notably, SBD_GA-TuαGT and-SBD_St2-TuαGT showed K_d of 0.7 and 1.5 mg/mL for waxy maize starch (WMS) granules, whereas TuαGT and SBD_St1-TuαGT had 3-5-fold lower affinity. SBD_St2 contributed more than SBD_St1 to activity, substrate binding, and the stability of TuαGT fusions.

Enzymatic synthesis, structure of isomalto/malto-polysaccharides from linear dextrins prepared by retrogradation

Isomalto/malto-polysaccharides (IMMPs) with degree of polymerization (DP) 10-100 have novel potential applications, including enhanced solubility and anti-inflammatory. However, there are minimal synthetic methods for preparing IMMPs with a relatively higher DP, which is due to the lack of suitable molecular weight linear dextrins (I-LDs). The existing I-LDs preparation methods have disadvantages, such as low yield and uncontrollable molecular weight. Therefore, this study proposes a method for preparing soluble linear dextrins (S-LDs, M_w = 2.1 kDa) by low-temperature retrogradation from debranched waxy corn starch (M_w = 3.0 kDa). S-LDs reacted with 4,6-α-glucanotransferase GtfB-ΔN from Limosilactobacillus reuteri 121 to yield IMMPs with 12.3 kDa M_w and 83.8% α1 → 6 linkages content. Process monitoring revealed the synthesis mechanism and a detailed reaction process. Finally, IMMPs were identified by enzyme fingerprinting as α1 → 6 chains with α1 → 4 fragments inlaid at the reducing, non-reducing end, and middle part. This study provides a new synthesis method and more structural information for IMMPs.

Diverse prebiotic effects of isomaltodextrins with different glycosidic linkages and molecular weights on human gut bacteria in vitro

Isomaltodextrin (IMD) is a novel dietary fiber enzymatically produced by reconstructing the molecular chain structure of starch using glycosyltransferases. In this study, the specific prebiotic effects of α-1,6 linear and α-1,2 or α-1,3 branched IMDs with different molecular weights (Mw) on human intestinal bacteria were investigated by pure culture of single strains and mixed fermentation of human fecal microflora in vitro. The results showed that α-1,6 linear IMDs markedly promoted beneficial Bifidobacterium and Lactobacillus in both pure culture and mixed fermentation. α-1,3 branching exhibited similar selectivity with α-1,6 linkage but yielded more butyrate in pure cultures. In contrast, IMDs containing α-1,2 branches were utilized efficiently only during mixed fermentation, which was speculated to result from metabolic cross-feeding. Regarding Mw, IMDs with lower Mw showed better prebiotic effects in pure cultures but no differences in mixed culture. These findings provide a theoretical basis for their application as functional foods.

Mutations in Amino Acid Residues of Limosilactobacillus reuteri 121 GtfB 4,6-α-Glucanotransferase that Affect Reaction and Product Specificity

Limosilactobacillus reuteri 121 4,6-α-glucanotransferase (Lr121 4,6-α-GTase), belonging to the glycosyl hydrolase (GH) 70 GtfB subfamily, converts starch and maltodextrins into linear isomalto/malto polysaccharides (IMMPs) with consecutive (α1 → 6) linkages. The recent elucidation of its crystal structure allowed identification and analysis of further structural features that determine its reaction and product specificity. Herein, sequence alignments between GtfB enzymes with different product linkage specificities (4,6-α-GTase and 4,3-α-GTase) identified amino acid residues in GH70 homology motifs, which may be critical for reaction and product specificity. Based on these alignments, four Lr121 GtfB-ΔN mutants (I1020M, S1057P, H1056G, and Q1126I) were constructed. Compared to wild-type Lr121 GtfB-ΔN, mutants S1057P and Q1126I had considerably improved catalytic efficiencies. Mutants H1056G and Q1126I showed a 9% decrease and an 11% increase, respectively, in the ratio of (α1 → 6) over (α1 → 4) linkages in maltodextrin-derived products. A change in linkage type (e.g., (α1 → 6) linkages to (α1 → 3) linkages) was not observed. The possible functional roles of these Lr121 GtfB-ΔN residues located around the acceptor substrate-binding subsites are discussed. The results provide new insights into structural determinants of the reaction and product specificity of Lr121 GtfB 4,6-α-GTase.

Structure, function and enzymatic synthesis of glucosaccharides assembled mainly by α1 → 6 linkages - A review

A variety of glucosaccharides composed of glucosyl residues can be classified into α- and β-type and have wide application in food and medicine areas. Among these glucosaccharides, β-type, such as cellulose and α-type, such as starch and starch derivatives, both contain 1 → 4 linkages and are well studied. Notably, in past decades also α1 → 6 glucosaccharides obtained increasing attention for unique physiochemical and biological properties. Especially in recent years, α1 → 6 glucosaccharides of different molecular weight distribution have been created and proved to be functional. However, compared to β- type and α1 → 4 glucosaccharides, only few articles provide a systematic overview of α1 → 6 glucosaccharides. This motivated, the present first comprehensive review on structure, function and synthesis of these α1 → 6 glucosaccharides, aiming both at improving understanding of traditional α1 → 6 glucosaccharides, such as isomaltose, isomaltooligosaccharides and dextrans, and to draw the attention to newly explored α1 → 6 glucosaccharides and their derivatives, such as cycloisomaltooligosaccharides, isomaltomegalosaccharides, and isomalto/malto-polysaccharides.

Directed Mutation of Two Key Amino Acid Residues Alters the Product Structure of the New 4,6-α-Glucanotransferase from Bacillus sporothermodurans

4,6-α-Glucanotransferases (4,6-α-GTs) convert amylose V into two types of differently structured products: a linear product connected by continuous α,1 → 6 bonds, such as isomalto/malto-polysaccharide (IMMP), and a highly branched product connected by alternating α,1 → 4 and α,1 → 6 bonds, such as reuteran-like polysaccharide (RLP). The synthesis process of 4,6-α-GT products is unclear, and exploring this process is significant for producing dietary fibers with potential applications. This study identified and expressed Geobacillus sp. 12AMOR1 GtfD-ΔC and Bacillus sporothermodurans GtfC-ΔC. After characterizing their products through ¹H NMR and enzymatic fingerprinting, we found that GtfD-ΔC synthesized RLP with 29% α,1 → 6 bonds, and GtfC-ΔC synthesized IMMP with 71% α,1 → 6 bonds. The maltoheptaose incubation experiment showed different chain-length transfer patterns of two 4,6-α-GTs, GtfC-ΔC and GtfD-ΔC, transferring single and multiple glucose residues in each transglycosylation reaction, respectively. Site-directed mutagenesis confirmed that positions S345 and I347 influence the product structure of GtfC-ΔC, and the S345T/I347V mutation changed the GtfC-ΔC product to a linear product connected by alternating α,1 → 4 and α,1 → 6 bonds (pullulan-like polysaccharide) and altered the chain-length transfer pattern of GtfC-ΔC. We proposed that different chain-length transfer patterns between GtfD-ΔC and GtfC-ΔC may explain their differences in product structures. These findings are significant for obtaining the desired dietary fiber by engineering 4,6-α-GT.

Insights into Broad-Specificity Starch Modification from the Crystal Structure of Limosilactobacillus Reuteri NCC 2613 4,6-α-Glucanotransferase GtfB

GtfB-type α-glucanotransferase enzymes from glycoside hydrolase family 70 (GH70) convert starch substrates into α-glucans that are of interest as food ingredients with a low glycemic index. Characterization of several GtfBs showed that they differ in product- and substrate specificity, especially with regard to branching, but structural information is limited to a single GtfB, preferring mostly linear starches and featuring a tunneled binding groove. Here, we present the second crystal structure of a 4,6-α-glucanotransferase (Limosilactobacillus reuteri NCC 2613) and an improved homology model of a 4,3-α-glucanotransferase GtfB (L. fermentum NCC 2970) and show that they are able to convert both linear and branched starch substrates. Compared to the previously described GtfB structure, these two enzymes feature a much more open binding groove, reminiscent of and evolutionary closer to starch-converting GH13 α-amylases. Sequence analysis of 287 putative GtfBs suggests that only 20% of them are similarly "open" and thus suitable as broad-specificity starch-converting enzymes.

GtfC Enzyme of Geobacillus sp. 12AMOR1 Represents a Novel Thermostable Type of GH70 4,6-α-Glucanotransferase That Synthesizes a Linear Alternating (α1 → 6)/(α1 → 4) α-Glucan and Delays Bread Staling

Starch-acting α-glucanotransferase enzymes are of great interest for applications in the food industry. In previous work, we have characterized various 4,6- and 4,3-α-glucanotransferases of the glycosyl hydrolase (GH) family 70 (subfamily GtfB), synthesizing linear or branched α-glucans. Thus far, GtfB enzymes have only been identified in mesophilic Lactobacilli. Database searches showed that related GtfC enzymes occur in Gram-positive bacteria of the genera Exiguobacterium, Bacillus, and Geobacillus, adapted to growth at more extreme temperatures. Here, we report characteristics of the Geobacillus sp. 12AMOR1 GtfC enzyme, with an optimal reaction temperature of 60 °C and a melting temperature of 68 °C, allowing starch conversions at relatively high temperatures. This thermostable 4,6-α-glucanotransferase has a novel product specificity, cleaving off predominantly maltose units from amylose, attaching them with an (α1 → 6)-linkage to acceptor substrates. In fact, this GtfC represents a novel maltogenic α-amylase. Detailed structural characterization of its starch-derived α-glucan products revealed that it yielded a unique polymer with alternating (α1 → 6)/(α1 → 4)-linked glucose units but without branches. Notably, this Geobacillus sp. 12AMOR1 GtfC enzyme showed clear antistaling effects in bread bakery products.

Development of a novel starch-based dietary fiber using glucanotransferase

In this study, a glucanotransferase from prokaryotic Azotobacter chroococcum NCIMB 8003 was recombinantly expressed and its biochemical characteristics and bioconversion ability for starch were investigated. The purified enzyme has the optimum activity at 55 °C and pH 6.5-7.0, as well as a melting temperature of 62 °C. The double-charged ion Ca2+ stimulated the activity of the enzyme by approximately 2.4 times. The kinetic parameters and specificity analysis revealed that this glucanotransferase had a higher affinity for high-amylose starch. During the transglycosylation reaction, the starch molecule was converted into a relatively small polymer with a narrow size distribution. For the enzyme modification of high-amylose starch for 72 h, the amount of α-1,6 linkages increased from 1.9% to 22.7% and the content of resistant starch (RS) increased from 3.18% to 17.83%. In addition, the fine structure displayed the reuteran-like highly branched glucan linked by single linear α-1,6 linkages and α-1,4/6 branching points. These results revealed that a promising prebiotic dietary fiber was synthesized from starch with glucanotransferase modification.

Potato starch modified by Streptococcus thermophilus GtfB enzyme has low viscoelastic and slowly digestible properties

Potato starch with high viscosity and digestibility cannot be added into some foods. To address this issue, a novel starch-acting enzyme 4,6-α-glucosyltransferase from Streptococcus thermophilus (StGtfB) was used. StGtfB decreased the iodine affinity and the molecular weight, but increased the degree of branching of starch at a mode quite different from glycogen 1,4-α-glucan branching enzyme (GBE). StGtfB at 5 U/g substrate mainly introduced DP 1-7 into amylose (AMY) or DP 1-12 branches into amylopectin (AMP), and increased the ratio of short- to long-branches from 0.32 to 2.22 or from 0.41 to 2.50. The DP 3 branch chain was the most abundant in both StGtfB-modified AMY and StGtfB-modified AMP. The DP < 6 branch chain contents in StGtfB-modified AMY were 42.68%, much higher than those of GBE-modified AMY. StGtfB significantly decreased viscoelasticity but still kept pseudoplasticity of starch. The modifications also slowed down the glucose generation rate of products at the mammalian mucosal α-glucosidase level. The slowly digestible fraction in potato starch increased from 34.29% to 53.22% using StGtfB of 5 U/g starch. This low viscoelastic and slowly digestible potato starch had great potential with respect to low and stable postprandial blood glucose.

The influence of α-1,4-glucan substrates on 4,6-α-d-glucanotransferase reaction dynamics during isomalto/malto-polysaccharide synthesis

Starch-based isomalto/malto-polysaccharides (IMMPs) are soluble dietary fibres produced by the incubation of α-(1 → 4) linked glucans with the 4,6-α-glucanotransferase (GTFB) enzyme. In this study, we investigated the reaction dynamics of the GTFB enzyme by using isoamylase debranched starches as simplified linear substrates. Modification of α-glucans by GTFB was investigated over time and analysed with ¹H NMR, HPSEC, HPAEC combined with glucose release measurements. We demonstrate that GTFB modification of linear substrates followed a substrate/acceptor model, in which α-(1 → 4) linked glucans DP ≥ 6 functioned as donor substrate, and α-(1 → 4) linked malto-oligomers DP < 6 functioned as acceptor. The presence of α-(1 → 4) linked malto-oligomers DP < 6 resulted in higher GTFB transferase activity, while their absence resulted in higher GTFB hydrolytic activity. The information obtained in this study provides a better insight into GTFB reaction dynamics and will be useful for α-glucan selection for the targeted synthesis of IMMPs in the future.

Lactic acid bacteria-derived α-glucans: From enzymatic synthesis to miscellaneous applications

Lactic acid bacteria (LAB) are capable of producing a variety of exopolysaccharide α-glucans, such as dextran, mutan, reuteran, and alternan. Their structural diversity allows LAB-derived α-glucans to hold vast commercial value and application potential in the food, cosmetic, medical, and biotechnology fields, garnering much attention in recent years. Glycoside Hydrolase 70 family (GH70) enzymes are efficient tools for the biosynthesis of α-glucans with various sizes, linkage compositions, and degrees of branching, using renewable and low-cost sucrose and starch as substrates. To date, plenty of various LAB-derived GH70 glucansucrases (especially dextransucrase) have been biochemically characterized to synthesize α-glucans from sucrose with a variety of structural organizations. This review mainly aimed at the biotechnological synthesis of α-glucans using GH70 family enzymes and their diverse (potential) applications. The purification, structural analysis and physicochemical properties of α-glucan polysaccharides were reviewed in detail. Synchronously, some new insights and future perspectives of LAB-derived α-glucans enzymatic synthesis and applications were also discussed. To expand the range of applications, the physicochemical properties and bioactivities of LAB-derived α-glucans, other than dextran, should be further explored. Additionally, screening novel GH70 subfamily starch-acting enzymes is conducive to expanding the repertoire of α-glucans.

Development of Slowly Digestible Starch Derived α-Glucans with 4,6-α-Glucanotransferase and Branching Sucrase Enzymes

Previously, we have identified and characterized 4,6-α-glucanotransferase enzymes of the glycosyl hydrolase (GH) family 70 (GH70) that cleave (α1→4)-linkages in amylose and introduce (α1→6)-linkages in linear chains. The 4,6-α-glucanotransferase of Lactobacillus reuteri 121, for instance, converts amylose into an isomalto/malto-polysaccharide (IMMP) with 90% (α1→6)-linkages. Over the years, also, branching sucrase enzymes belonging to GH70 have been characterized. These enzymes use sucrose as a donor substrate to glucosylate dextran as an acceptor substrate, introducing single -(1→2,6)-α-d-Glcp-(1→6)- (Leuconostoc citreum enzyme) or -(1→3,6)-α-d-Glcp-(1→6)-branches (Leuconostoc citreum, Leuconostoc fallax, Lactobacillus kunkeei enzymes). In this work, we observed that the catalytic domain 2 of the L. kunkeei branching sucrase used not only dextran but also IMMP as the acceptor substrate, introducing -(1→3,6)-α-d-Glcp-(1→6)-branches. The products obtained have been structurally characterized in detail, revealing the addition of single (α1→3)-linked glucose units to IMMP (resulting in a comb-like structure). The in vitro digestibility of the various α-glucans was estimated with the glucose generation rate (GGR) assay that uses rat intestinal acetone powder to simulate the digestive enzymes in the upper intestine. Raw wheat starch is known to be a slowly digestible carbohydrate in mammals and was used as a benchmark control. Compared to raw wheat starch, IMMP and dextran showed reduced digestibility, with partially digestible and indigestible portions. Interestingly, the digestibility of the branching sucrase modified IMMP and dextran products considerably decreased with increasing percentages of (α1→3)-linkages present. The treatment of amylose with 4,6-α-glucanotransferase and branching sucrase/sucrose thus allowed for the synthesis of amylose/starch derived α-glucans with markedly reduced digestibility. These starch derived α-glucans may find applications in the food industry.

In Vitro Fermentation Behavior of Isomalto/Malto-Polysaccharides Using Human Fecal Inoculum Indicates Prebiotic Potential

SCOPE

This study characterize intestinal fermentation of isomalto/malto-polysaccharides (IMMPs), by monitoring degradation of IMMPs, production of short chain fatty acids (SCFAs), lactic acid, and succinic acid as well as enzyme activity and microbiota composition.

METHODS AND RESULTS

IMMP-94 (94% α-(1→6) glycosidic linkages), IMMP-96, IMMP-27, and IMMP-dig27 (IMMP-27 after removal of digestible starch segments) are fermented batchwise in vitro using human fecal inoculum. Fermentation digesta samples are taken for analysis in time up till 48 h. The fermentation of α-(1→6) glycosidic linkages in IMMP-94, IMMP-96, and IMMP-dig27 starts after 12 h and finishes within 48 h. IMMP-27 fermentation starts directly after inoculation utilizing α-(1→4) linked glucosyl residues; however, the utilization of α-(1→6) linked glucoses is delayed and start only after the depletion of α-(1→4) linked glucose moieties. SCFAs are produced in high amounts with acetic acid and succinic acid being the major products next to propionic acid and butyric acid. The polysaccharide fraction is degraded into isomalto-oligosaccharides (IMOs) mainly by extracellular enzymes. The smaller IMOs are further degraded by cell-associated enzymes. Overall microbial diversity and the relative abundance of Bifidobacterium and Lactobacillus, significantly increase during the fermentation of IMMPs.

CONCLUSION

IMMP containing segments of α-(1→6) linked glucose units are slowly fermentable fibers with prebiotic potential.

Wheat Starch with Low Retrogradation Properties Produced by Modification of the GtfB Enzyme 4,6-α-Glucanotransferase from Streptococcus thermophilus

A GtfB enzyme 4,6-α-glucanotransferase from Streptococcus thermophilus lacking 761 N-terminal amino acids was heterologously expressed in Escherichia coli. Purified S. thermophilus GtfB showed transglycosylation activities toward starch, resulting in branch points of (α1→6)-glycosidic linkages plus linear chains of (α1→4)-glycosidic linkages. After wheat starch was modified at a rate of 0.1 g/mL by 1-4 U/g starch GtfB at pH 6.0 and 40 °C for 1 h, the weight-averaged molecular weight decreased from 1.70 × 10⁷ g/mol to 1.21 × 10⁶ to 3.41 × 10⁶ g/mol, the amylose content decreased from 22.07 to 16.34-17.11%, and that of amylopectin long-branch chains decreased from 26.4 to 10.25-15.64% ( P < 0.05). After the GtfB-modified wheat starches were gelatinized and stored at 4 °C for 1-2 weeks, their endothermic enthalpies were significantly lower than that of the control sample ( P < 0.05), indicating low retrogradation rates.

Biotechnological potential of novel glycoside hydrolase family 70 enzymes synthesizing α-glucans from starch and sucrose

Transglucosidases belonging to the glycoside hydrolase (GH) family 70 are promising enzymatic tools for the synthesis of α-glucans with defined structures from renewable sucrose and starch substrates. Depending on the GH70 enzyme specificity, α-glucans with different structures and physicochemical properties are produced, which have found diverse (potential) commercial applications, e.g. in food, health and as biomaterials. Originally, the GH70 family was established only for glucansucrase enzymes of lactic acid bacteria that catalyze the synthesis of α-glucan polymers from sucrose. In recent years, we have identified 3 novel subfamilies of GH70 enzymes (designated GtfB, GtfC and GtfD), inactive on sucrose but converting starch/maltodextrin substrates into novel α-glucans. These novel starch-acting enzymes considerably enlarge the panel of α-glucans that can be produced. They also represent very interesting evolutionary intermediates between sucrose-acting GH70 glucansucrases and starch-acting GH13 α-amylases. Here we provide an overview of the repertoire of GH70 enzymes currently available with focus on these novel starch-acting GH70 enzymes and their biotechnological potential. Moreover, we discuss key developments in the understanding of structure-function relationships of GH70 enzymes in the light of available three-dimensional structures, and the protein engineering strategies that were recently applied to expand their natural product specificities.

Mining novel starch-converting Glycoside Hydrolase 70 enzymes from the Nestlé Culture Collection genome database: The Lactobacillus reuteri NCC 2613 GtfB

The Glycoside hydrolase (GH) family 70 originally was established for glucansucrases of lactic acid bacteria (LAB) converting sucrose into α-glucan polymers. In recent years we have identified 3 subfamilies of GH70 enzymes (designated GtfB, GtfC and GtfD) as 4,6-α-glucanotransferases, cleaving (α1 → 4)-linkages in maltodextrins/starch and synthesizing new (α1 → 6)-linkages. In this work, 106 putative GtfBs were identified in the Nestlé Culture Collection genome database with ~2700 genomes, and the L. reuteri NCC 2613 one was selected for further characterization based on variations in its conserved motifs. Using amylose the L. reuteri NCC 2613 GtfB synthesizes a low-molecular-mass reuteran-like polymer consisting of linear (α1 → 4) sequences interspersed with (α1 → 6) linkages, and (α1 → 4,6) branching points. This product specificity is novel within the GtfB subfamily, mostly comprising 4,6-α-glucanotransferases synthesizing consecutive (α1 → 6)-linkages. Instead, its activity resembles that of the GtfD 4,6-α-glucanotransferases identified in non-LAB strains. This study demonstrates the potential of large-scale genome sequence data for the discovery of enzymes of interest for the food industry. The L. reuteri NCC 2613 GtfB is a valuable addition to the starch-converting GH70 enzyme toolbox. It represents a new evolutionary intermediate between families GH13 and GH70, and provides further insights into the structure-function relationships of the GtfB subfamily enzymes.

Characterization of the Paenibacillus beijingensis DSM 24997 GtfD and its glucan polymer products representing a new glycoside hydrolase 70 subfamily of 4,6-α-glucanotransferase enzymes

Previously we have reported that the Gram-negative bacterium Azotobacter chroococcum NCIMB 8003 uses the 4,6-α-glucanotransferase GtfD to convert maltodextrins and starch into a reuteran-like polymer consisting of (α1→4) glucan chains connected by alternating (α1→4)/(α1→6) linkages and (α1→4,6) branching points. This enzyme constituted the single evidence for this reaction and product specificity in the GH70 family, mostly containing glucansucrases encoded by lactic acid bacteria (http://www.CAZy.org). In this work, 4 additional GtfD-like proteins were identified in taxonomically diverse plant-associated bacteria forming a new GH70 subfamily with intermediate characteristics between the evolutionary related GH13 and GH70 families. The GtfD enzyme encoded by Paenibacillus beijingensis DSM 24997 was characterized providing the first example of a reuteran-like polymer synthesizing 4,6-α-glucanotransferase in a Gram-positive bacterium. Whereas the A. chroococcum GtfD activity on amylose resulted in the synthesis of a high molecular polymer, in addition to maltose and other small oligosaccharides, two reuteran-like polymer distributions are produced by P. beijingensis GtfD: a high-molecular mass polymer and a low-molecular mass polymer with an average Mw of 27 MDa and 19 kDa, respectively. Compared to the A. chroooccum GtfD product, both P. beijingensis GtfD polymers contain longer linear (α1→4) sequences in their structure reflecting a preference for transfer of even longer glucan chains by this enzyme. Overall, this study provides new insights into the evolutionary history of GH70 enzymes, and enlarges the diversity of natural enzymes that can be applied for modification of the starch present in food into less and/or more slowly digestible carbohydrate structures.

Enhanced Probiotic Potential of Lactobacillus reuteri When Delivered as a Biofilm on Dextranomer Microspheres That Contain Beneficial Cargo

As with all orally consumed probiotics, the Gram-positive bacterium Lactobacillus reuteri encounters numerous challenges as it transits through the gastrointestinal tract of the host, including low pH, effectors of the host immune system, as well as competition with commensal and pathogenic bacteria, all of which can greatly reduce the availability of live bacteria for therapeutic purposes. Recently we showed that L. reuteri, when adhered in the form of a biofilm to a semi-permeable biocompatible dextranomer microsphere, reduces the incidence of necrotizing enterocolitis by 50% in a well-defined animal model following delivery of a single prophylactic dose. Herein, using the same semi-permeable microspheres, we showed that providing compounds beneficial to L. reuteri as diffusible cargo within the microsphere lumen resulted in further advantageous effects including glucosyltransferase-dependent bacterial adherence to the microsphere surface, resistance of bound bacteria against acidic conditions, enhanced adherence of L. reuteri to human intestinal epithelial cells in vitro, and facilitated production of the antimicrobial compound reuterin and the anti-inflammatory molecule histamine. These data support continued development of this novel probiotic formulation as an adaptable and effective means for targeted delivery of cargo beneficial to the probiotic bacterium.

4,3-α-Glucanotransferase, a novel reaction specificity in glycoside hydrolase family 70 and clan GH-H

Lactic acid bacteria possess a diversity of glucansucrase (GS) enzymes that belong to glycoside hydrolase family 70 (GH70) and convert sucrose into α-glucan polysaccharides with (α1 → 2)-, (α1 → 3)-, (α1 → 4)- and/or (α1 → 6)-glycosidic bonds. In recent years 3 novel subfamilies of GH70 enzymes, inactive on sucrose but using maltodextrins/starch as substrates, have been established (e.g. GtfB of Lactobacillus reuteri 121). Compared to the broad linkage specificity found in GSs, all GH70 starch-acting enzymes characterized so far possess 4,6-α-glucanotransferase activity, cleaving (α1 → 4)-linkages and synthesizing new (α1 → 6)-linkages. In this work a gene encoding a putative GH70 family enzyme was identified in the genome of Lactobacillus fermentum NCC 2970, displaying high sequence identity with L. reuteri 121 GtfB 4,6-α-glucanotransferase, but also with unique variations in some substrate-binding residues of GSs. Characterization of this L. fermentum GtfB and its products revealed that it acts as a 4,3-α-glucanotransferase, converting amylose into a new type of α-glucan with alternating (α1 → 3)/(α 1 → 4)-linkages and with (α1 → 3,4) branching points. The discovery of this novel reaction specificity in GH70 family and clan GH-H expands the range of α-glucans that can be synthesized and allows the identification of key positions governing the linkage specificity within the active site of the GtfB-like GH70 subfamily of enzymes.

Expression of an (Engineered) 4,6-α-Glucanotransferase in Potato Results in Changes in Starch Characteristics

Starch structure strongly influences starch physicochemical properties, determining the end uses of starch in various applications. To produce starches with novel structure and exploit the mechanism of starch granule formation, an (engineered) 4, 6-α-glucanotransferase (GTFB) from Lactobacillus reuteri 121 was introduced into two potato genetic backgrounds: amylose-containing line Kardal and amylose-free mutant amf. The resulting starches showed severe changes in granule morphology regardless of genetic backgrounds. Modified starches from amf background exhibited a significant increase in granule size and starch phosphate content relative to the control, while starches from Kardal background displayed a higher digestibility, but did not show changes in granule size and phosphate content. Transcriptome analysis revealed the existence of a mechanism to restore the regular packing of double helices in starch granules, which possibly resulted in the removal of novel glucose chains potentially introduced by the (engineered) GTFB. This amendment mechanics would also explain the difficulties to detect alterations in starch fine structure in the transgenic lines.