Generation and Characterization of Indoor Fungal Aerosols for Inhalation Studies

Mycological air contamination level and biodiversity of airborne fungi isolated from the zoological garden air - preliminary research

The aim of this paper was to evaluate the degree of mycological air contamination and determine the taxonomic diversity of airborne fungi residing in the air of 20 different animal facilities in a zoological garden. The concentrations of fungi in the zoological garden were measured using a MAS-100 air sampler. The collected microorganisms were identified using the combination of molecular and morphological methods. The fungal concentration ranged from 50 to 3.65 × 104 CFU/m3 during the whole study. The quantitative analysis of the fungal aerosol showed that the obtained concentration values were lower than the recommended permissible limits (5 × 104 CFU/m3 for fungi). Environmental factors, including temperature and relative humidity, exerted a varying effect on the presence and concentration of isolated fungi. Relative humidity was shown to correlate positively with the concentration of fungal spores in the air of the facilities studied (rho = 0.57, p < 0.0021). In parallel, no significant correlation was established between temperature and total fungal concentration (rho =  - 0.1, p < 0.2263). A total of 112 fungal strains belonging to 50 species and 10 genera were isolated. Penicillium was the dominant genera, including 58.9% of total fungal strains, followed by Aspergillus 25.89%, Cladosporium 3.57%, Talaromyces 3.57%, Mucor 1.78%, Schizophyllum 1.78%, Syncephalastrum 0.89%, Alternaria 0.89%, Absidia 0.89%, and Cunninghamella 0.89%. Our preliminary studies provide basic information about the fungal concentrations, as well as their biodiversity in zoological garden. Further studies are needed to generate additional data from long-term sampling in order to increase our understanding of airborne fungal composition in the zoological garden.

Exposure to resistant fungi across working environments and time

Antifungal resistance has emerged as a significant health concern with increasing reports of resistant variants in previously susceptible species. At present, little is known about occupational exposure to antifungal-resistant fungi. This study aimed to investigate Danish workers' occupational exposure to airborne fungi resistant to first-line treatment drugs. A retrospective study was performed on a unique collection of personal exposure samples gathered over a twenty-year period from Danish working environments, in sectors including agriculture, animal handling, waste management, and healthcare. A total of 669 samples were cultivated at 37 °C and fungal colonies were identified using MALDI-TOF MS. Subsequently, identification was confirmed by amplicon sequencing the genes of calmodulin and beta-tubulin to unveil potential cryptic species. Infectious fungi (495 isolates from 23 species) were tested for resistance against Itraconazole, Voriconazole, Posaconazole, and Amphotericin B. Working environments were highly variable in the overall fungal exposure, and showed vastly different species compositions. Resistance was found in 30 isolates of the species Aspergillus fumigatus (4 of 251 isolates), A. nidulans (2 of 13), A. niger complex (19 of 131), A. versicolor (3 of 18), and A. lentulus (2 of 2). Sequence analysis revealed several cryptic species within the A. niger complex including A. tubingensis, A. luchuensis, and A. phoenicis. Among the resistant A. fumigatus isolates, two contained the well-described TR34/L98H mutation in the cyp51A gene and promoter region, while the remainder harbored silent mutations. The results indicate that the working environment significantly contributes to exposure to resistant fungi, with particularly biofuel plant workers experiencing high exposure. Differences in the prevalence of resistance across working environments may be linked to the underlying species composition.

Optimization of Aspergillus versicolor Culture and Aerosolization in a Murine Model of Inhalational Fungal Exposure

Aspergillus versicolor is ubiquitous in the environment and is particularly abundant in damp indoor spaces. Exposure to Aspergillus species, as well as other environmental fungi, has been linked to respiratory health outcomes, including asthma, allergy, and even local or disseminated infection. However, the pulmonary immunological mechanisms associated with repeated exposure to A. versicolor have remained relatively uncharacterized. Here, A. versicolor was cultured and desiccated on rice then placed in an acoustical generator system to achieve aerosolization. Mice were challenged with titrated doses of aerosolized conidia to examine deposition, lymphoproliferative properties, and immunotoxicological response to repeated inhalation exposures. The necessary dose to induce lymphoproliferation was identified, but not infection-like pathology. Further, it was determined that the dose was able to initiate localized immune responses. The data presented in this study demonstrate an optimized and reproducible method for delivering A. versicolor conidia to rodents via nose-only inhalation. Additionally, the feasibility of a long-term repeated exposure study was established. This experimental protocol can be used in future studies to investigate the physiological effects of repeated pulmonary exposure to fungal conidia utilizing a practical and relevant mode of delivery. In total, these data constitute an important foundation for subsequent research in the field.

Environmental monitoring for filamentous fungal pathogens in hematopoietic cell transplant units

The incidence of invasive fungal disease (IFD) is on the rise due to increasing numbers of highly immunocompromized patients. Nosocomial IFD remains common despite our better understanding of its risk factors and pathophysiology. High-efficiency particulate air filtration with or without laminar air flow, frequent air exchanges, a positive pressure care environment, and environmental hygiene, amongst other measures, have been shown to reduce the mould burden in the patient environment. Environmental monitoring for moulds in areas where high-risk patients are cared for, such as hematopoietic cell transplant units, has been considered an adjunct to other routine environmental precautions. As a collaborative effort between authors affiliated to the Infection Prevention and Control Working Group and the Fungal Infection Working Group of the International Society of Antimicrobial Chemotherapy (ISAC), we reviewed the English language literature and international guidance to describe the evidence behind the need for environmental monitoring for filamentous fungi as a quality assurance approach with an emphasis on required additional precautions during periods of construction. Many different clinical sampling approaches have been described for air, water, and surface sampling with significant variation in laboratory methodologies between reports. Importantly, there are no agreed-upon thresholds that correlate with an increase in the clinical risk of mould infections. We highlight important areas for future research to assure a safe environment for highly immunocompromized patients.

Effect of odor treatment systems on bioaerosol microbial concentration and diversity from wastewater treatment plants

Biofiltration, activated carbon and chemical scrubbing are technologies used for odor control in wastewater treatment plants. These systems may also influence the airborne microbial load in treated air. The study objectives were to 1) evaluate the capacity of three odor control system technologies to reduce the airborne concentration of total bacteria, Legionella, L. pneumophila, non-tuberculous mycobacteria (NTM) and Cladosporium in winter and summer seasons and 2) to describe the microbial ecology of the biofiltration system and evaluate its impact on treated air microbial diversity. A reduction of the total bacterial concentration up to 25 times was observed after odor treatment. Quantification by qPCR revealed the presence of Legionella spp. in all air samples ranging between 26 and 1140 GC/m³, while L. pneumophila was not detected except for three samples below the limit of quantification. A significant increase of up to 25-fold of Legionella spp. was noticed at the outlet of two of the three treatment systems. NTM were ubiquitously detected before air treatment (up to 2500 GC/m³) and were significantly reduced by all 3 systems (up to 13-fold). Cladosporium was measured at low concentrations for each system (< 190 GC/m³), with 68 % of the air samples below the limit of detection. Biodiversity results revealed that biofiltration system is an active process that adapts to air pollutants over time. Legionella spp. were detected in significant abundance in the air once treated in winter (up to 27 %). Nevertheless, the abundance of protozoan hosts is low and does not explain the multiplication of Legionella spp. The season remains the most influential factor shaping biodiversity. In summer only, air biofiltration caused a significant enrichment of the biodiversity. Although odor control technologies are not designed for bacterial mitigation, findings from this study suggest their potential to reduce the abundance of some genera harboring pathogenic species.

Using qPCR and microscopy to assess the impact of harvesting and weather conditions on the relationship between Alternaria alternata and Alternaria spp. spores in rural and urban atmospheres

Alternaria is a plant pathogen and human allergen. Alternaria alternata is one of the most abundant fungal spores in the air. The purpose of this study was to examine whether Alternaria spp. spore concentrations can be used to predict the abundance and spatio-temporal pattern of A. alternata spores in the air. This was investigated by testing the hypothesis that A. alternata dominates airborne Alternaria spp. spores and varies spatio-temporally. Secondarily, we aimed at investigating the relationship between airborne Alternaria spp. spores and the DNA profile of A. alternata spores between two proximate (~ 7 km apart) sites. These were examined by sampling Alternaria spp. spores using Burkard 7-day and cyclone samplers for the period 2016-2018 at Worcester and Lakeside campuses of the University of Worcester, UK. Daily Alternaria spp. spores from the Burkard traps were identified using optical microscopy whilst A. alternata from the cyclone samples was detected and quantified using quantitative polymerase chain reaction (qPCR). The results showed that either A. alternata or other Alternaria species spores dominate the airborne Alternaria spore concentrations, generally depending on weather conditions. Furthermore, although Alternaria spp. spore concentrations were similar for the two proximate sites, A. alternata spore concentrations significantly varied for those sites and it is highly likely that the airborne samples contained large amounts of small fragments of A. alternata. Overall, the study shows that there is a higher abundance of airborne Alternaria allergen than reported by aerobiological networks and the majority is likely to be from spore and hyphal fragments.

Tourism affects microbial assemblages in show caves

Anthropogenic disturbance on natural ecosystems is growing in frequency and magnitude affecting all ecosystems components. Understanding the response of different types of biocoenosis to human disturbance is urgently needed and it can be achieved by adopting a metacommunity framework. With the aid of advanced molecular techniques, we investigated sediment communities of Fungi, Bacteria and Archaea in four Italian show caves, aiming to disentangle the effects induced by tourism on their diversity and to highlight changes in the driving forces that shape their community composition. We modelled diversity measures against proxies of tourism pressure. With this approach we demonstrate that the cave tourism has a direct effect on the community of Bacteria and an indirect influence on Fungi and Archaea. By analysing the main driving forces influencing the community composition of the three microbial groups, we highlighted that stochastic factors override dispersal-related processes and environmental selection in show caves compared to undisturbed areas. Thanks to this approach, we provide new perspectives on the dynamics of microbial communities under human disturbance suggesting that a proper understanding of the underlying selective mechanisms requires a comprehensive and multi-taxonomic approach.

Airborne transmission of biological agents within the indoor built environment: a multidisciplinary review

The nature and airborne dispersion of the underestimated biological agents, monitoring, analysis and transmission among the human occupants into building environment is a major challenge of today. Those agents play a crucial role in ensuring comfortable, healthy and risk-free conditions into indoor working and leaving spaces. It is known that ventilation systems influence strongly the transmission of indoor air pollutants, with scarce information although to have been reported for biological agents until 2019. The biological agents' source release and the trajectory of airborne transmission are both important in terms of optimising the design of the heating, ventilation and air conditioning systems of the future. In addition, modelling via computational fluid dynamics (CFD) will become a more valuable tool in foreseeing risks and tackle hazards when pollutants and biological agents released into closed spaces. Promising results on the prediction of their dispersion routes and concentration levels, as well as the selection of the appropriate ventilation strategy, provide crucial information on risk minimisation of the airborne transmission among humans. Under this context, the present multidisciplinary review considers four interrelated aspects of the dispersion of biological agents in closed spaces, (a) the nature and airborne transmission route of the examined agents, (b) the biological origin and health effects of the major microbial pathogens on the human respiratory system, (c) the role of heating, ventilation and air-conditioning systems in the airborne transmission and (d) the associated computer modelling approaches. This adopted methodology allows the discussion of the existing findings, on-going research, identification of the main research gaps and future directions from a multidisciplinary point of view which will be helpful for substantial innovations in the field.

Dynamic Fluctuation and Niche Differentiation of Fungal Pathogens Infecting Bell Pepper Plants

The plant microbiome is shaped by plant development and microbial interaction. Fungal pathogens infecting bell pepper plants may fluctuate across the growing seasons. Dynamic fluctuation of the microbiome and fungal pathogens in bell pepper plants is poorly understood, and the origin of fungal pathogens causing fruit rot and leaf wilt has been barely investigated. In this study, we used amplicon sequencing (i.e., 16S rRNA and internal transcribed spacer [ITS] sequencing) to explore the compositional variations of the microbiome in bell pepper plants and studied the fluctuation of fungal pathogens across the growing seasons. Co-occurrence network analysis was applied to track the origin and dissemination route of fungal pathogens that infected bell pepper plants. ITS and 16S rRNA sequencing analyses demonstrated that fungal pathogens infecting fruits and leaves probably belonged to the Penicillium, Cladosporium, Fusarium, and unclassified_Sclerotiniaceae genera rather than one specific genus. The dominant fungal pathogens were different, along with the development of bell pepper plants. Both plant development and fungal pathogens shaped microbial communities in bell pepper plants across the growing seasons. Fungal pathogens decreased species richness and diversity of fungal communities in fungus-infected fruit and leaf tissues but not the uninfected stem tissues. Bacterial metabolic functions of xenobiotics increased in fungus-infected leaves at a mature developmental stage. Competitive interaction was present between fungal and bacterial communities in leaves. Co-occurrence network analysis revealed that the origins of fungal pathogens included the greenhouse, packing house, and storage room. Niche differentiation of microbes was discovered among these locations. IMPORTANCE Bell peppers are widely consumed worldwide. Fungal pathogen infections of bell peppers lead to enormous economic loss. To control fungal pathogens and increase economic benefit, it is essential to investigate the shifting patterns of the microbiome and fungal pathogens in bell pepper plants across the growing seasons. In this study, bell pepper plant diseases observed in fruits and leaves were caused by different fungal pathogens. Fungal pathogens originated from the greenhouse, packing house, and storage room, and niche differentiation existed among microbes. This study improves the understanding of dynamic fluctuation and source of fungal pathogens infecting bell pepper plants in the farming system. It also facilitates precise management of fungal pathogens in the greenhouse.

Aerosolization of fungal spores in indoor environments

Fungi in indoor environments can cause adverse health effects through inhalation and epidermal exposure. The risk of fungal exposure originates from the aerosolization of fungal spores. However, spore aerosolization is still not well understood. This paper provides a review of indoor fungal contamination, especially the aerosolization of fungal spores. We attempted to summarize what is known today and to identify what more information is needed to predict the aerosolization of fungal spores. This paper first reviews fungal contamination in indoor environments and HVAC systems. The detachment of fungal spores from colonies and the spore aerosolization principle are then summarized. Based on the above discussion, prediction methods for spore aerosolization are discussed. This review further clarifies the current situation and future efforts required to accurately predict spore aerosolization. This information is useful for forecasting and controlling the aerosolization of fungal spores.

Airborne bacterial and fungal concentrations and fungal diversity in bedrooms of infant twins under 1 year of age living in Porto

Exposure to airborne microorganisms has been linked to the development of health detriments, particularly in children. Microbial pollution can constitute a relevant health concern indoors, where levels of airborne microorganisms may be specially increased. This work aimed to characterize the airborne bacterial levels, and fungal concentration and diversity to which twins are exposed in their bedrooms (n = 30) during the first year of life. Bacterial and fungal levels varied widely across the studied bedrooms, with 10% of the rooms presenting values exceeding the national limit for both indoor bacterial and fungal counts. Cladosporium was the predominant genera, but Penicillium, Aspergillus, Alternaria, Trichoderma and Chrysonilia were also identified in the samples collected. In addition, two toxicogenic species, A. flavus and T. viride, were identified at counts that exceeded the established limit (12 CFU/m³) in 3 and 7% of the bedrooms surveyed, respectively. Based on indoor-to-outdoor concentration ratios, outdoor air seemed to be the main contributor to the total load of fungi found indoors, while airborne bacteria appeared to be mainly linked to indoor sources. Higher indoor nitrogen dioxide levels were negatively correlated with indoor fungi concentrations, whereas particulate matter and volatile organic compounds concentrations were associated with an increase in fungal prevalence. In addition, rooms with small carpets or located near outdoor agriculture sources presented significantly greater total fungal concentrations. Multiple linear regression models showed that outdoor levels were the single significant predictor identified, explaining 38.6 and 53.6% of the Cladosporium sp. and total fungi counts, respectively. The results also suggest the existence of additional factors contributing to airborne biologicals load in infants' bedrooms that deserve further investigation. Findings stress the need for investigating the existence of declared interactive effects between chemical and biological air pollutants to accurately understand the health risk that the assessed levels can represent to infants.

Work clothes as a vector for microorganisms: Accumulation, transport, and resuspension of microorganisms as demonstrated for waste collection workers

Work clothes may act as a vector for the transport of microorganisms leading to second-hand exposure; however, this has not been studied in work environments. We investigated whether microorganisms accumulate on workers' clothes in environments with elevated microbial exposures, and whether they are transported with the clothes and subsequently resuspended to the air. To study this, we selected waste collection workers and potential transport of bacteria and fungi to waste truck cabs via clothes, and compared the microbial communities within truck cabs, in waste collection workers' personal exposure, and on clean T-shirts worn by the workers. Microbial communities were also investigated for the presence of potentially harmful microorganisms. Results showed that microorganisms accumulated in large quantities (GM = 3.69 × 10⁵ CFU/m²/h for bacteria, GM = 8.29 × 10⁴ CFU/m²/h for fungi) on workers' clothes. The concentrations and species composition of airborne fungi in the truck cabs correlated significantly with the accumulation and composition of fungi on clothes and correlated to concentrations (a trend) and species composition of their personal exposures. The same patterns were not found for bacteria, indicating that work clothes to a lesser degree act as a vector for bacteria under waste collection workers' working conditions compared to fungi. Several pathogenic or allergenic microorganisms were present, e.g.: Klebsiella oxytoca, K. pneumoniae, Proteus mirabilis, Providencia rettgeri, Pseudomonas aeruginosa, and Aspergillus fumigatus, A. glaucus, A. nidulans, A. niger, and various Penicillium species. The potential 'take-home' exposure to these microorganisms are of most concern for immunocompromised or atopic individuals or people with open wounds or cuts. In conclusion, the large accumulation of microorganisms on workers' clothes combined with the overlap between fungal species for the different sample types, and the presence of pathogenic and allergenic microorganisms forms the basis for encouragement of good clothing hygiene during and post working hours.

Occupational exposure to fungi on recyclable paper pots and growing media and associated health effects - A review of the literature

Different types of pots and growing and casing media, including biodegradable materials, are used for plant and mushroom production. The fungus Peziza ostracoderma has gained attention for its visible growth on growing media for plants and casing media for mushrooms. Through a review of the literature we aim to evaluate whether exposure to fungi from recyclable pots and different growing and casing media occurs and causes occupational health effects. Based on the published papers, specific fungal species were not related to a specific medium. Thus P. ostracoderma has been found on paper pots, peat, sterilized soil, vermiculite, and rockwool with plants, and on peat, pumice, and paper casing for mushrooms. It has been found in high concentrations in the air in mushroom farms. Also Acremonium spp., Aspergillus niger, A. fumigatus, Athelia turficola, Aureobasidium pullulans, Chaetomium globosum, Chrysonilia sitophila, Cladosporium spp., Cryptostroma corticale, Lecanicillium aphanocladii, Sporothrix schenckii, Stachybotrys chartarum, and Trichoderma spp. have been found on different types of growing or casing media. Most of the fungi have also been found in the air in greenhouses, but the knowledge about airborne fungal species in mushroom farms is very limited. Eight publications describe cases of health effects associated directly with exposure to fungi from pots or growing or casing media. These include cases of hypersensitivity pneumonitis caused by exposure to: A. fumigatus, A. niger, Au. pullulans, Cr. corticale, P. ostracoderma, and a mixture of fungi growing on different media. Different approaches have been used to avoid growth of saprophytes including: chemical fungicides, the formulation of biodegradable pots and growing media and types of peat. To increase the sustainability of growing media different types of media are tested for their use and with the present study we highlight the importance of also considering the occupational health of the growers who may be exposed to fungi from the media and pots.

Diversity and Seasonal Dynamics of Airborne Fungi in Nerja Cave, Spain

Nerja Cave, Southern Spain, was revealed as an important biodiversity reservoir from which several novel species of Aspergillus were described. We carried out an aerobiological study in Nerja Cave to assess the origin of airborne fungi. This study quantified the fungi present in the air of ten representative halls covering the three sectors comprising the cave: Touristic Galleries, High Galleries, and New Galleries. Microclimatological monitoring allowed us to understand the dynamic of airborne fungi in two seasons of the year (winter and summer), corresponding to the strongest and the lowest cave ventilation, and to validate the influence that the transport of airborne fungi from outside may have on the cave itself. The data show that cold air enters in winter, as confirmed by the abundant presence of Aspergillus and Penicillium spores inside and outside the cave. In summer, the abundance of some fungi in the air of Nerja Cave, which are not detected outside, indicates a stagnation or low ventilation, and therefore, the concentration of fungal spores is maxima. The high occurrence of Cladosporium outside the cave and the scarce abundance inside support the cave stagnation in this season.

Estimating Lung Deposition of Fungal Spores Using Actual Airborne Spore Concentrations and Physiological Data

Exposure to bioaerosols has been implicated in adverse respiratory symptoms, infectious diseases, and bioterrorism. Although these particles have been measured within residential and occupational settings in multiple studies, the deposition of bioaerosol particles within the human respiratory system has been only minimally explored. This paper uses real-world environmental measurement data of total fungal spores using Air-o-Cell cassettes in 16 different apartments and residents' physiological data in those apartments to predict respiratory deposition of the spores. The airborne spore concentrations were measured during the spring, summer, and fall. The respiratory deposition of five most prevalent spore genera-Ascospores, Aspergillus, Basidiospores, Cladosporium, and Myxomycetes-was predicted using three empirical models: the Multiple Path Particle Dosimetry model, using both the Yeh and age-specific versions, and the Bioaerosol Adaptation of the International Committee on Radiological Protection's Lung deposition model. The predicted total deposited number of spores was highest for Ascospores and Cladosporium. While the majority of spores deposit were in the extrathoracic region, there is a significant deposition for both Aspergillus and Cladosporium in the alveolar region, potentially leading to the development of aspergillosis or allergic asthma. Although the dose-response relationship is unknown, the estimate of the actual spore deposition could be the first step in determining such a relationship.

A cohort study of cucumber greenhouse workers' exposure to microorganisms as measured using NGS and MALDI-TOF MS and biomarkers of systemic inflammation

Work in greenhouses entails exposure to airborne fungi and bacteria. The aims of this study are to obtain knowledge about whether exposure to fungal and bacterial genera and species during work in a cucumber greenhouse is affected by work tasks, and whether a cohort of greenhouse workers' serum levels of serum amyloid A (SAA) and C-reactive protein (CRP), biomarkers of systemic inflammation, are associated with this. Data on personal exposure to airborne fungal and bacterial species measured over 4 years as well as serum levels of SAA and CRP sampled over two years were analyzed. For data analysis, the main work tasks were grouped into three different groups, called 'grouped work task'. Microorganisms were identified using matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF MS) and next-generation sequencing (NGS). The 'daily exposure' of greenhouse workers' were as follows: 4.8 × 10⁴ CFU bacteria/m³, 1.4 × 10⁶ CFU fungi/m³, and 392 EU/m³ of endotoxin. Workers were exposed to many different microbial species including several species within the genera Acinetobacter, Bacillus, Microbacterium, Pseudomonas, Staphylococcus, and Streptomyces. The genera Ralstonia and Cladosporium were found in most samples. The exposure levels as well as the microbial composition were associated significantly with grouped work task and season with high exposures during tasks in close contact with mature and old plants and in the autumn. CRP and SAA levels were also associated with exposure level and grouped work tasks. The Shannon-Wiener indices were not different in the 3 'grouped work tasks'. Several specific species including e.g. Halomonas elongata, Stenotrophomonas maltophilia, Podosphaera fusca, and Wallemia spp. were found frequently or in high concentrations in the exposures associated with the highest levels of CRP and SAA. The microorganisms S. maltophilia, P. fusca, and Wallemia spp. were also found on the cucumber plant leaves. In conclusion, both exposure level and the species composition seem to have an effect on the serum levels of CRP and SAA of exposed workers. The greenhouse workers were exposed to only a few species characterized as human pathogens.

Inhalation of Stachybotrys chartarum Fragments Induces Pulmonary Arterial Remodeling

Stachybotrys chartarum is a fungal contaminant within the built environment and a respiratory health concern in the United States. The objective of this study was to characterize the mechanisms influencing pulmonary immune responses to repeatedly inhaled S. chartarum. Groups of B6C3F1/N mice repeatedly inhaled viable trichothecene-producing S. chartarum conidia (strain A or strain B), heat-inactivated conidia, or high-efficiency particulate absolute-filtered air twice per week for 4 and 13 weeks. Strain A was found to produce higher amounts of respirable fragments than strain B. Lung tissue, serum, and BAL fluid were collected at 24 and 48 hours after final exposure and processed for histology, flow cytometry, and RNA and proteomic analyses. At 4 weeks after exposure, a T-helper cell type 2-mediated response was observed. After 13 weeks, a mixed T-cell response was observed after exposure to strain A compared with a T-helper cell type 2-mediated response after strain B exposure. After exposure, both strains induced pulmonary arterial remodeling at 13 weeks; however, strain A-exposed mice progressed more quickly than strain B-exposed mice. BAL fluid was composed primarily of eosinophils, neutrophils, and macrophages. Both the immune response and the observed pulmonary arterial remodeling were supported by specific cellular, molecular, and proteomic profiles. The immunopathological responses occurred earlier in mice exposed to high fragment-producing strain A. The rather striking induction of pulmonary remodeling by S. chartarum appears to be related to the presence of fungal fragments during exposure.

Fungal Contaminants in Energy Efficient Dwellings: Impact of Ventilation Type and Level of Urbanization

The presence of growing fungi in the indoor environment has been associated with the development of respiratory problems such as asthma or allergic rhinitis, as well as the worsening of respiratory pathologies. Their proliferation indoors could be a result of water leakage or inadequate ventilation. Although the factors promoting mould growth have been widely investigated in traditional dwellings, little work has been done in energy efficient dwellings. Here, the effectiveness of ventilation type, i.e., natural or mechanical, in influencing mould development was estimated in 44 recent and 105 retrofitted energy efficient dwellings. Fungi growing on surfaces were investigated in the dwellings situated in rural, peri-urban, and urban regions of Switzerland. The presence of these fungi was also investigated in bedroom settled dust. Information on building characteristics and owners' lifestyle were collected. Significant associations were found with the level of urbanisation, the location of mouldy area in dwellings, and the diversity of fungal taxa. Dwellings in peri-urban zones showed the most frequent fungal contamination in the owners' bedroom and the highest diversity of fungal genera among dwellings. While the urbanisation level or the ventilation type favoured no specific genus, we found marked disparities in the diversity of fungi growing on surfaces in naturally ventilated versus mechanically ventilated dwellings. Aspergillus, in particular, was a frequent surface contaminant in bedrooms with natural ventilation, but not in those mechanically ventilated. We observed a strong association between fungal growth on surfaces and the number of fungal particles counted in the settled dust of owners' bedrooms. These results demonstrate the importance of ventilation systems in energy efficient dwellings in controlling fungal proliferation in living areas.

Strong variance in the inflammatory and cytotoxic potentials of Penicillium and Aspergillus species from cleaning workers' exposure in nursing homes

Penicillium and Aspergillus are among the dominant genera of fungi in many environments. Exposure to these fungi may cause inflammation-related health effects, however the knowledge about this at species level is limited. The aim of this study was to obtain knowledge about cleaning workers' exposure to fungi and to investigate the total inflammatory potential (TIP) and the cytotoxic potential of fungal species. The fungi were obtained from the personal exposure of cleaning workers' in five nursing homes. In total 271 fungal isolates were identified using MALDI-TOF MS. The TIP and cytotoxic potential were determined for 30 different fungal isolates covering 17 species in an in vitro assay by exposing HL-60 cells to the fungal spores of each isolate. The geometric mean exposure of the cleaning workers was 351 CFU fungi/m³ air. We showed that the TIP and cytotoxicity varied among both species and isolates. At the two lowest doses, there was a positive relationship between spore concentration and TIP. The species with highest TIPs were A. candidus and P. italicum, while the most cytotoxic ones were A. niger and A. fumigatus. There was no obvious relationship between the TIP of an isolate and its cytotoxicity. The results of this study provide a better understanding of the inflammatory potential and cytotoxicity of different environmental fungal species and contribute to the risk evaluation of exposure to different Penicillium and Aspergillus species.

Towards a risk evaluation of workers' exposure to handborne and airborne microbial species as exemplified with waste collection workers

Bioaerosol exposure is associated with health problems. The aim of this study is to evaluate whether it is possible to assess the risks posed by waste collection workers' exposure through identification and characterization of bacterial and fungal species, to which the workers are exposed. Using MALDI-TOF MS, microorganisms in waste collection workers' exposure through air, hand, and contact with the steering wheel were identified. Fungi found in high concentrations from the workers' exposure were characterized for the total inflammatory potential (TIP), cytotoxicity, and biofilm-forming capacity. In total, 180 different bacterial and 37 different fungal species in the workers' exposure samples were identified. Some of them belong to Risk Group 2, e.g. Escherichia coli, Klebsiella oxytoca, Staphylococcus aureus, and Aspergillus fumigatus, some have been associated with occupational health problems e.g. Penicillium citrinum and P. glabrum and some are described as emerging pathogens e.g. Aureobasidium pullulans. The TIP of fungal species was dose-dependent. High TIP values were found for Penicillium italicum, P. brevicompactum, P. citrinum, and P. glabrum. Several species were cytotoxic, e.g. A. niger and P. expansum, while some, e.g. P. chrysogenum, did not affect the cell viability. Based on waste workers' average inhalation rate, they inhaled up to 2.3 × 10⁴ cfu of A. niger, 7.4 × 10⁴ cfu of P. expansum, and 4.0 × 10⁶ cfu of P. italicum per work day. Some species e.g. A. niger and P. citrinum were able to form biofilm. In conclusion, the workers were exposed to several species of microorganisms of which some to varying degrees can be evaluated concerning risk. Thus, some microorganisms belong to Risk Group 2, and some are described as causing agents of occupational health problems, emerging pathogens, or intrinsically antibiotic resistant. For some other species very little is known. The TIP, cytotoxicity, and ability to form biofilm of the dominating fungi support and expand previous findings. These parameters depended on the species and the dose, thus highlighting the importance of species identification and exposure level in the risk assessment of exposure.

Particle size distribution of the major Alternaria alternata allergen, Alt a 1, derived from airborne spores and subspore fragments

Fungal fragments are abundant immunoreactive bioaerosols that may outnumber the concentrations of intact spores in the air. To investigate the importance of Alternaria fragments as sources of allergens compared to Alternaria spores, we determined the levels of Alternaria spores and Alt a 1 (the major allergen in Alternaria alternata spores) collected on filters within three fractions of particulate matter (PM) of different aerodynamic diameter: (1) PM_>10, (diameter>10 μm); (2) PM_2.5-10 (2.5-10μm); (3) PM_2.5 (0.12-2.5 μm). The airborne particles were collected using a three stage high-volume ChemVol cascade impactor during the Alternaria sporulation season in Poznań, Poland (30 d between 6 July and 22 September 2016). The quantification of Alt a 1 was performed using the enzyme-linked immunosorbent assay. High concentrations of Alt a 1 were recorded during warm and dry d characterized by high sunshine duration, lack of clouds and high dew point values. Atmospheric concentrations of Alternaria spores correlated significantly (r = 0.930, p < 0.001) with Alt a 1 levels. The highest Alt a 1 was recorded in PM_2.5-10 (66.8 % of total Alt a 1), while the lowest in PM_2.5 (<1.0 %). Significantly more Alt a 1 per spore (>30 %) was observed in PM_2.5-10 than in PM_>10. This Alt a 1 excess may be derived from sources other than spores, e.g. hyphal fragments. Overall, in outdoor air the major source of Alt a 1 are intact Alternaria spores, but the impact of other fungal fragments (hyphal parts, broken spores, conidiophores) cannot be neglected, as they may increase the total atmospheric Alt a 1 concentration.

Cultivation and aerosolization of Stachybotrys chartarum for modeling pulmonary inhalation exposure

Objective: Stachybotrys chartarum is a hydrophilic fungal species commonly found as a contaminant in water-damaged building materials. Although several studies have suggested that S. chartarum exposure elicits a variety of adverse health effects, the ability to characterize the pulmonary immune responses to exposure is limited by delivery methods that do not replicate environmental exposure. This study aimed to develop a method of S. chartarum aerosolization to better model inhalation exposures. Materials and methods: An acoustical generator system (AGS) was previously developed and utilized to aerosolize and deliver fungal spores to mice housed in a multi-animal nose-only exposure chamber. In this study, methods for cultivating, heat-inactivating, and aerosolizing two macrocyclic trichothecene-producing strains of S. chartartum using the AGS are described. Results and discussion: In addition to conidia, acoustical generation of one strain of S. chartarum resulted in the aerosolization of fungal fragments (<2 µm aerodynamic diameter) derived from conidia, phialides, and hyphae that initially comprised 50% of the total fungal particle count but was reduced to less than 10% over the duration of aerosolization. Acoustical generation of heat-inactivated S. chartarum did not result in a similar level of fragmentation. Delivery of dry, unextracted S. chartarum using these aerosolization methods resulted in pulmonary inflammation and immune cell infiltration in mice inhaling viable, but not heat-inactivated S. chartarum. Conclusions: These methods of S. chartarum growth and aerosolization allow for the delivery of fungal bioaerosols to rodents that may better simulate natural exposure within water-damaged indoor environments.

Indoor damp surfaces harbor molds with clinical significance

Background and Purpose:

Fungal contamination in damp places in buildings has become an increasing problem worldwide. Dampness facilitates the growth of fungi, which can cause adverse effects not only on the buildings but also on their occupants. The aim of this study was to identify indoor mold species in the buildings of Kerman province, Iran.

Materials and Methods:

In this study, 110 samples were obtained from surfaces of damp indoor areas in buildings randomly selected in Kerman province. The identification of fungal species was based on the macroscopic and microscopic characteristics of the isolates, such as colony morphology, hyphae, conidia, and conidiophores, as well as molecular sequence data.

Results:

Based on the results, a total of 218 fungal isolates were obtained. Apart from frequently isolated fungi, such as Alternaria, Aspergillus, and Penicillium, 13 species, including Cladosporium sphaerospermum, Cladosporium herbarum, Cladosporium halotolerans, Engyodontium album, Collariella bostrychodes, Stachybotrys xigazenensis, Ramularia eucalypti, Fusarium merismoides, Fusarium solani, Ochroconis musae, Mucor racemosus, Acremonium zonatum, and Acremonium persicinum were identified, and the selected species were described. Among these 13 species, Cladosporium was the most common species (43%) in indoor surfaces, followed by Ochroconis musae (10.8%) and Engyodontium album (7.4%). To the best of our knowledge, Stachybotrys xigazenensis was reported in the present study for the first time in Iran. In addition, E. album and O. musae were isolated for the first time from indoor surfaces in Iran.

Conclusion:

According to the results, the level of overall fungal richness across indoor surfaces was high. Some of the isolated taxa were clinically significant. It was concluded that the damp residential surfaces were potentially passive collectors of clinically significant molds.

Concentrations of Staphylococcus species in indoor air as associated with other bacteria, season, relative humidity, air change rate, and S. aureus-positive occupants

The aim of this study was to obtain knowledge about concentrations of Staphylococcus aureus, MRSA (methicillin-resistant S. aureus), and other Staphylococcus species in indoor air in Greater Copenhagen and about factors affecting the concentrations. The effects of season, temperature, relative humidity, air change rate (ACR), other bacterial genera, area per occupant, and presence of S. aureus-positive occupants were studied. In samples from 67 living rooms, S. hominis, S. warneri, S. epidermidis, and S. capitis were found in 13-25%; S. saprophyticus, S. cohnii, and S. pasteuri in 5-10%; and S. lugdunensis, S. haemolyticus, S. caprae, S. equorum, S. kloosii, S. pettenkoferi, S. simulans, and S. xylosus in less than 3%. Staphylococcus aureus were found in two of 67 living rooms: spa type t034 (an MRSA) was recovered from a farmhouse, while spa type t509 was found in an urban home. Two species, S. equorum and S. kloosii, were found only in the farmhouse. Staphylococcus was significantly associated with season with lowest concentration and richness in winter. Genera composition was associated with ACR with smaller fractions of Staphylococcus at higher ACR, while richness was significantly and negatively associated with area per occupant. Concentration of Staphylococcus correlated positively with the total concentration of bacteria, but negatively with the total concentration of other bacteria. The concentration of Staphylococcus was not significantly associated with concentrations of the other abundant genera Bacillus, Kocuria, and Micrococcus. In offices with S. aureus-positive occupants, airborne S. aureus was not found. In conclusion, Staphylococcus species constitute a considerable proportion of the airborne bacteria in the studied homes and offices. However, both S. aureus and MRSA had very low prevalence during all seasons. Thus, transmission of S. aureus and MRSA through the air in living rooms in Copenhagen is expected to be limited. The negative associations between ACR and the fraction Staphylococcus constituted out of total bacteria, and between area per occupant and Staphylococcus richness indicate that it might be possible to affect the presence of airborne Staphylococcus in homes.

Aerosolization of Mycotoxins after Growth of Toxinogenic Fungi on Wallpaper

Many fungi can develop on building material in indoor environments if the moisture level is high enough. Among species that are frequently observed, some are known to be potent mycotoxin producers. This presence of toxinogenic fungi in indoor environments raises the question of the possible exposure of occupants to these toxic compounds by inhalation after aerosolization. This study investigated mycotoxin production by Penicillium brevicompactum, Aspergillus versicolor, and Stachybotrys chartarum during their growth on wallpaper and the possible subsequent aerosolization of produced mycotoxins from contaminated substrates. We demonstrated that mycophenolic acid, sterigmatocystin, and macrocyclic trichothecenes (sum of 4 major compounds) could be produced at levels of 1.8, 112.1, and 27.8 mg/m², respectively, on wallpaper. Moreover, part of the produced toxins could be aerosolized from the substrate. The propensity for aerosolization differed according to the fungal species. Thus, particles were aerosolized from wallpaper contaminated with P. brevicompactum when an air velocity of just 0.3 m/s was applied, whereas S. chartarum required an air velocity of 5.9 m/s. A. versicolor was intermediate, since aerosolization occurred under an air velocity of 2 m/s. Quantification of the toxic content revealed that toxic load was mostly associated with particles of size ≥3 μm, which may correspond to spores. However, some macrocyclic trichothecenes (especially satratoxin H and verrucarin J) can also be found on smaller particles that can deeply penetrate the respiratory tract upon inhalation. These elements are important for risk assessment related to moldy environments.IMPORTANCE The possible colonization of building material by toxinogenic fungi in cases of moistening raises the question of the subsequent exposure of occupants to aerosolized mycotoxins. In this study, we demonstrated that three different toxinogenic species produce mycotoxins during their development on wallpaper. These toxins can subsequently be aerosolized, at least partly, from moldy material. This transfer to air requires air velocities that can be encountered under real-life conditions in buildings. Most of the aerosolized toxic load is found in particles whose size corresponds to spores or mycelium fragments. However, some toxins were also found on particles smaller than spores that are easily respirable and can deeply penetrate the human respiratory tract. All of these data are important for risk assessment related to fungal contamination of indoor environments.