Bacterial cell surface damage due to centrifugal compaction

SecMet-FISH: labeling, visualization, and enumeration of secondary metabolite producing microorganisms

Our understanding of the role of secondary metabolites in microbial communities is challenged by intrinsic limitations of culturing bacteria under laboratory conditions and hence cultivation independent approaches are needed. Here, we present a protocol termed Secondary Metabolite FISH (SecMet-FISH), combining advantages of gene-targeted fluorescence in situ hybridization (geneFISH) with in-solution methods (in-solution FISH) to detect and quantify cells based on their genetic capacity to produce secondary metabolites. The approach capitalizes on the conserved nature of biosynthetic gene clusters (BGCs) encoding adenylation (AD) and ketosynthase (KS) domains, and thus selectively targets the genetic basis of non-ribosomal peptide and polyketide biosynthesis. The concept relies on the generation of amplicon pools using degenerate primers broadly targeting AD and KS domains followed by fluorescent labeling, detection, and quantification. Initially, we obtained AD and KS amplicons from Pseuodoalteromonas rubra, which allowed us to successfully label and visualize BGCs within P. rubra cells, demonstrating the feasibility of SecMet-FISH. Next, we adapted the protocol and optimized it for hybridization in both Gram-negative and Gram-positive bacterial cell suspensions, enabling high-throughput single cell analysis by flow cytometry. Ultimately, we used SecMet-FISH to successfully distinguish secondary metabolite producers from non-producers in a five-member synthetic community.

Hydraulic retention time governed the micro/nanostructures of titanium-incorporated diatoms and their photocatalytic activity

Titanium-incorporated diatoms are promising biomaterials to photodegrade micropollutants such as pharmaceuticals and personal care products (PPCPs). Hydraulic retention time (HRT) is a key parameter for diatom cultivation and the incorporation of titanium into diatom frustules. This study assessed how HRT governs the micro/nanostructures, titania (TiO2) content and distribution, and the photocatalytic activity of titanium-incorporated diatom frustules. We cultivated a diatom strain Stephanodiscus hantzschii using a feed solution containing titanium(IV) in membrane bioreactors (MBRs) at a solids retention time (SRT) of 10 d and staged HRTs from 24 to 12 and to 6 h. The decrease in HRT reduced the porosity of diatom frustules but increased their silicon and titania contents. When the HRT decreased from 24 to 12 and to 6 h, the specific surface areas of the diatom decreased from 37.65 ± 3.19 to 31.53 ± 3.71 and to 18.43 ± 2.69 m2·g-1 frustules, while the titanium (Ti) contents increased from 53 ± 14 to 71 ± 9 and to 85 ± 13 mg Ti·g-1 frustules. The increase in the influent flow rates of the MBRs with decreasing HRTs likely enhanced nutrient diffusion inside the diatom valve pores, facilitating the uptake and incorporation of silicon and titanium. The titanium-incorporated frustules were effective in removing two representative PPCPs, bisphenol A (BPA) and N,N-diethyl-meta-toluamide (DEET), from water. As photocatalytic activity depends on the amount of titanium, decreasing the HRT substantially increased the photocatalytic activity of the titanium-incorporated frustules. In batch tests under ultraviolet light, frustules from the diatom cultivated at HRTs of 24, 12, and 6 h had the pseudo-first-order removal (mainly through photodegradation) rate constants of BPA of 0.376, 0.456, and 0.683 h-1, respectively. Under the same experimental condition, the pseudo-first-order removal rate constants of DEET by the frustules cultivated at HRTs of 24, 12, and 6 h increased from 0.270 to 0.330 and to 0.480 h-1.

Culture-independent identification of bloodstream infections from whole blood: prospective evaluation in specimens of known infection status

Sepsis caused by bloodstream infection (BSI) is a major healthcare burden and a leading cause of morbidity and mortality worldwide. Timely diagnosis is critical to optimize clinical outcome, as mortality rates rise every hour treatment is delayed. Blood culture remains the "gold standard" for diagnosis but is limited by its long turnaround time (1-7 days depending on the organism) and its potential to provide false-negative results due to interference by antimicrobial therapy or the presence of mixed (i.e., polymicrobial) infections. In this paper, we evaluated the performance of resistance and pathogen ID/BSI, a direct-from-specimen molecular assay. To reduce the false-positivity rate common with molecular methods, this assay isolates and detects genomic material only from viable microorganisms in the blood by incorporating a novel precursor step to selectively lyse host and non-viable microbial cells and remove cell-free genomic material prior to lysis and analysis of microbial cells. Here, we demonstrate that the assay is free of interference from host immune cells and common antimicrobial agents at elevated concentrations. We also demonstrate the accuracy of this technology in a prospective cohort pilot study of individuals with known sepsis/BSI status, including samples from both positive and negative individuals.

IMPORTANCE

Blood culture remains the "gold standard" for the diagnosis of sepsis/bloodstream infection (BSI) but has many limitations which may lead to a delay in appropriate and accurate treatment in patients. Molecular diagnostic methods have the potential for markedly improving the management of such patients through faster turnaround times and increased accuracy. But molecular diagnostic methods have not been widely adopted for the identification of BSIs. By incorporating a precursor step of selective lysis of host and non-viable microorganisms, our resistance and pathogen ID (RaPID)/BSI molecular assay addresses many limitations of blood culture and other molecular assay. The RaPID/BSI assay has an approximate turnaround time of 4 hours, thereby significantly reducing the time to appropriate and accurate diagnosis of causative microorganisms in such patients. The short turnaround time also allows for close to real-time tracking of pathogenic clearance of microorganisms from the blood of these patients or if a change of antimicrobial regimen is required. Thus, the RaPID/BSI molecular assay helps with optimization of antimicrobial stewardship; prompt and accurate diagnosis of sepsis/BSI could help target timely treatment and reduce mortality and morbidity in such patients.

Nutrient enrichment increases virulence in an opportunistic environmental pathogen, with greater effect at low bacterial doses

Eutrophication of aquatic ecosystems is associated with an increased risk of pathogen infection via increased pathogen growth and host exposure via increased pathogen doses. Here, we studied the effect of nutrients on the virulence of an opportunistic bacterial pathogen of fish, Flavobacterium columnare, in challenge experiments with rainbow trout fingerlings. We hypothesized that removing all nutrients by washing the bacteria would reduce virulence as compared to unwashed bacteria, but adding nutrients to the tank water would increase the virulence of the bacterium. Nutrient addition and increase in bacterial dose increased virulence for both unwashed and washed bacteria. For unwashed bacteria, the addition of nutrients reduced the survival probability of fish challenged with low bacterial doses more than for fish challenged with higher bacterial doses, suggesting activation of bacterial virulence factors. Washing and centrifugation reduced viable bacterial counts, and the addition of washed bacteria alone did not lead to fish mortality. However, a small addition of nutrient medium, 0.05% of the total water volume, added separately to the fish container, restored the virulence of the washed bacteria. Our results show that human-induced eutrophication could trigger epidemics of aquatic pathogens at the limits of their survival and affect their ecology and evolution by altering the dynamics between strains that differ in their growth characteristics.

Illuminating the Tiny World: A Navigation Guide for Proper Raman Studies on Microorganisms

Raman spectroscopy is an emerging method for the identification of bacteria. Nevertheless, a lot of different parameters need to be considered to establish a reliable database capable of identifying real-world samples such as medical or environmental probes. In this review, the establishment of such reliable databases with the proper design in microbiological Raman studies is demonstrated, shining a light into all the parts that require attention. Aspects such as the strain selection, sample preparation and isolation requirements, the phenotypic influence, measurement strategies, as well as the statistical approaches for discrimination of bacteria, are presented. Furthermore, the influence of these aspects on spectra quality, result accuracy, and read-out are discussed. The aim of this review is to serve as a guide for the design of microbiological Raman studies that can support the establishment of this method in different fields.

Set-up of a pharmaceutical cell bank of Magnetospirillum gryphiswaldense MSR1 magnetotactic bacteria producing highly pure magnetosomes

We report the successful fabrication of a pharmaceutical cellular bank (PCB) containing magnetotactic bacteria (MTB), which belong to the Magnetospirillum gryphiswaldense MSR1 species. To produce such PCB, we amplified MTB in a minimal growth medium essentially devoid of other heavy metals than iron and of CMR (Carcinogenic, mutagenic and reprotoxic) products. The PCB enabled to acclimate MTB to such minimal growth conditions and then to produce highly pure magnetosomes composed of more than 99.9% of iron. The qualification of the bank as a PCB relies first on a preserved identity of the MTB compared with the original strain, second on genetic bacterial stability observed over 100 generations or under cryo-preservation for 16 months, third on a high level of purity highlighted by an absence of contaminating microorganisms in the PCB. Furthermore, the PCB was prepared under high-cell load conditions (9.108 cells/mL), allowing large-scale bacterial amplification and magnetosome production. In the future, the PCB could therefore be considered for commercial as well as research orientated applications in nanomedicine. We describe for the first-time conditions for setting-up an effective pharmaceutical cellular bank preserving over time the ability of certain specific cells, i.e. Magnetospirillum gryphiswaldense MSR1 MTB, to produce nano-minerals, i.e. magnetosomes, within a pharmaceutical setting.

Microbial gas fermentation technology for sustainable food protein production

The development of novel, sustainable, and robust food production technologies represents one of the major pillars to address the most significant challenges humanity is going to face on earth in the upcoming decades - climate change, population growth, and resource depletion. The implementation of microfoods, i.e., foods formulated with ingredients from microbial cultivation, into the food supply chain has a huge potential to contribute towards energy-efficient and nutritious food manufacturing and represents a means to sustainably feed a growing world population. This review recapitulates and assesses the current state in the establishment and usage of gas fermenting bacteria as an innovative feedstock for protein production. In particular, we focus on the most promising representatives of this taxon: the hydrogen-oxidizing bacteria (hydrogenotrophs) and the methane-oxidizing bacteria (methanotrophs). These unicellular microorganisms can aerobically metabolize gaseous hydrogen and methane, respectively, to provide the required energy for building up cell material. A protein yield over 70% in the dry matter cell mass can be reached with no need for arable land and organic substrates making it a promising alternative to plant- and animal-based protein sources. We illuminate the holistic approach to incorporate protein extracts obtained from the cultivation of gas fermenting bacteria into microfoods. Herein, the fundamental properties of the bacteria, cultivation methods, downstream processing, and potential food applications are discussed. Moreover, this review covers existing and future challenges as well as sustainability aspects associated with the production of microbial protein through gas fermentation.

Guidelines for an optimized differential centrifugation of cells

Literature reviews reveal a significant deficiency in conceptual comprehension concerning centrifugation, a crucial step in both medical and research protocols. The arbitrary fluctuations in centrifugal forces present a potential threat to the reproducibility of results. To address this, we propose concise guidelines that integrate key factors such as temperature, osmolarity, fluid volume, and viscosity. These guidelines aim to enhance comprehension of optimal sedimentation conditions for cell suspensions. Additionally, we introduce a standardized protocol for determining the optimal RCF and centrifugation time. The goal is to maximize sedimentation efficiency while minimizing cell damage, contributing to a universally applicable and reproducible method in centrifugation practices.

Feasibility of an acoustophoresis-based system for a high-throughput cell washing: application to bioproduction

BACKGROUND AIMS

These last decades have seen the emergence and development of cell-based therapies, notably those based on mesenchymal stromal cells (MSCs). The advancement of these promising treatments requires increasing the throughput of processed cell for industrialization in order to reduce production costs. Among the various bioproduction challenges, downstream processing, including medium exchange, cell washing, cell harvesting and volume reduction, remains a critical step for which improvements are needed. Typically, these processes are performed by centrifugation. However, this approach limits the automation, especially in small batch productions where it is performed manually in open system.

METHODS

An acoustophoresis-based system was developed for cell washing. The cells were transferred from one stream to another via the acoustic forces and were collected in a different medium. The optimal flow rates of the different streams were assessed using red blood cells suspended in an albumin solution. Finally, the impact of acoustic washing on adipose tissue-derived MSCs (AD-MSCs) transcriptome was investigated by RNA-sequencing.

RESULTS

With a single passage through the acoustic device at input flow rate of 45 mL/h, the albumin removal was up to 90% while recovering 99% of RBCs. To further increase the protein removal, a loop washing in two steps was performed and has allowed an albumin removal ≥99% and a red blood cell/AD-MSCs recovery of 99%. After loop washing of AD-MSCs, only two genes, HES4 and MIR-3648-1, were differently expressed compared with the input.

CONCLUSIONS

In this study, we developed a continuous cell-washing system based on acoustophoresis. The process allows a theoretically high cell throughput while inducing little gene expression changes. These results indicate that cell washing based on acoustophoresis is a relevant and promising solution for numerous applications in cell manufacturing.

Immunomagnetic separation coupled with flow cytometry for the analysis of Legionella pneumophila in aerosols

Legionella pneumophila are pathogenic bacteria that can be found in high concentrations in artificial water systems like evaporative cooling towers, which have been the source of frequent outbreaks in recent years. Since inhaled L. pneumophila can lead to Legionnaires' disease, the development of suitable sampling and rapid analysis strategies for these bacteria in aerosols is therefore of great relevance. In this work, different concentrations of viable L. pneumophila Sg 1 were nebulized and sampled by the cyclone sampler Coriolis® µ under defined conditions in a bioaerosol chamber. To quantify intact Legionella cells, the collected bioaerosols were subsequently analyzed by immunomagnetic separation coupled with flow cytometry (IMS-FCM) on the platform rqmicro.COUNT. For analytical comparison, measurements with qPCR and cultivation were performed. Limits of detection (LOD) of 2.9 × 10³ intact cells m^-3 for IMS-FCM and 7.8 × 10² intact cells m^-3 for qPCR indicating a comparable sensitivity as in culture (LOD = 1.5 × 10³ culturable cells m^-3). Over a working range of 10³ - 10⁶ cells mL^-1, the analysis of nebulized and collected aerosol samples with IMS-FCM and qPCR provides higher recovery rates and more consistent results than by cultivation. Overall, IMS-FCM is a suitable culture-independent method for quantification of L. pneumophila in bioaerosols and is promising for field application due to its simplicity in sample preparation.

Impact of Chlorine Dioxide on Pathogenic Waterborne Microorganisms Occurring in Dental Chair Units

Bacterial contamination is a problem in dental unit water lines with the consequence of implementing regular disinfection. In this study, the short-term impact of chlorine dioxide (ClO₂) treatment was investigated on the microorganisms Legionella pneumophila and L. anisa, Pseudomonas aeruginosa, Escherichia coli, and Staphylococcus aureus. The environmental background was proven as an important factor regarding the tolerance to 0.4 mg/L ClO₂ as saline and phosphate-buffered saline resulted in a higher bacterial reduction than tap water. Gram-positive microorganisms demonstrated higher robustness to ClO₂ than Gram-negative, and microorganisms adapted to tap water showed increased stability compared to cultured cells. At high densities, substantial numbers of bacteria were able to withstand disinfection, whereby the use of 4.6 mg/L ClO₂ increased the inactivation rate. A massive cell decrease occurred within the first 5 minutes with subsequent plateau formation or slowed cell reduction upon further exposure. This biphasic kinetics cannot be explained by a ClO₂ depletion effect alone, because the probability of bacterial subpopulations with increased tolerance should be taken into account, too. Our results prove high disinfection efficiency to microorganisms that were rather found in correlation to the level of bacterial contamination and background solutions than the chosen concentration for ClO₂ treatment itself.

Rapid antimicrobial susceptibility testing for low bacterial concentrations integrating a centrifuge based bacterial cell concentrator

Antibiotic resistance threatens human health worldwide. Patients infected with antibiotic-resistant bacteria require appropriate antibiotic prescriptions based on a rapid antibiotic susceptibility test (AST). Various rapid AST methods have been developed to replace the conventional AST method, which requires a long testing time. However, in most cases, these methods require a high density of bacterial samples, which leads to an additional incubation or concentration process. In this study, we introduce a rapid AST platform that allows the use of low-density bacterial samples by concentrating bacterial cells and performing AST on a single microfluidic chip. In addition, the outlet-free loading process enables the platform to load the sample and concentrate bacteria into a small field of view for single-cell detection. Using this method, rapid AST determined antibiotic resistance in three hours from a standard strain of 10³ colony-forming unit (CFU) per ml bacterial concentration. This technique can be used for the cell-based drug testing of various low-concentration bacterial samples.

Increased mesoscale diffusivity in response to acute glucose starvation

Macromolecular crowding is an important parameter that impacts multiple biological processes. Passive microrheology using single particle tracking is a powerful means of studying macromolecular crowding. Here we monitored the diffusivity of self-assembling fluorescent nanoparticles (μNS) in response to acute glucose starvation. mRNP diffusivity was reduced upon glucose starvation as previously reported. In contrast, we observed increased diffusivity of μNS particles. Our results suggest that, upon glucose starvation, mRNP granule diffusivity may be reduced due to changes in physical interactions, while global crowding in the cytoplasm may be reduced.

Increased mesoscale diffusivity in response to acute glucose starvation

Macromolecular crowding is an important property of cells that impacts multiple biological processes. Passive microrheology using single particle tracking is a powerful means of studying macromolecular crowding. Here we monitored the diffusivity of self-assembling fluorescent nanoparticles (μNS) and mRNPs ( GFA1 -PP7) in response to acute glucose starvation. mRNP diffusivity was reduced upon glucose starvation as previously reported. By contrast, we observed increased diffusivity of μNS particles. Our results suggest that, upon glucose starvation, mRNP granule diffusivity may be reduced due to increased physical interactions, whereas macromolecular crowding in the cytoplasm may be globally reduced.

Outer Membrane Vesicles: Biogenesis, Functions, and Issues

This review focuses on nonlytic outer membrane vesicles (OMVs), a subtype of bacterial extracellular vesicles (BEVs) produced by Gram-negative organisms focusing on the mechanisms of their biogenesis, cargo, and function. Throughout, we highlight issues concerning the characterization of OMVs and distinguishing them from other types of BEVs. We also highlight the shortcomings of commonly used methodologies for the study of BEVs that impact the interpretation of their functionality and suggest solutions to standardize protocols for OMV studies.

Ejaculate for Microbiological Culture: To Wash or Not To Wash?

Bacteria can be associated with male infertility. Antibacterial substances (e.g., zinc-containing proteins, antimicrobial peptides) in ejaculates might impair the growth of bacteria in culture. We therefore wanted to test if removing antibacterial substances by washing the ejaculate could improve the detection of bacteria in culture. All ejaculates from patients ≥18 years old, which were obtained for routine diagnostics to assess male infertility were included in this study (no exclusion criteria were applied). Test samples were diluted with 2 mL sterile 0.45% saline, vortexed, and centrifuged (5 min; 7.5 × g). After the removal of 2 mL of the supernatant and resuspension, 10 μL of the pellet was used for aerobic and anaerobic culture. Control samples were cultured identically but without washing. Species identification was done with matrix-assisted laser desorption ionization-time of flight mass spectrometry. A total of 186 samples were included. The data set was stratified into five groups (Gram-negative rods [GNR], anaerobes [AN], Enterococcus spp. [EC], coagulase-negative staphylococci [CNS], and viridans streptococci [VS]). Compared to the control arm, the test arm revealed significant lower proportions for CNS (59.1% versus 44.6%, P < 0.01) and VS (53.8% versus 41.9%, P = 0.03). Similarly, slightly lower proportions of GNR (16.1% versus 15.1%, P = 0.89), AN (19.9% versus 17.2%, P = 0.5), and EC (25.3% versus 23.1%, P = 0.63) were observed. The medians of CFU were lower in test samples compared to the control samples (6.5 × 10³ versus 2.5 × 10³, P < 0.01) for any bacterial growth. Lower colony counts were also observed for individual bacterial groups. In conclusion, preculture washing of ejaculates results in a decrease in total bacteria count and culture-positive samples. IMPORTANCE This study compares two methods for processing ejaculate samples from men undergoing investigations for infertility. The method of sample washing and centrifugation was compared to the standard method of direct inoculation and culture. The study hypothesis was that preprocessing of samples may increase bacterial yield by removing bactericidal substances from semen. However, we found that washing ejaculate samples before microbiological culture did not improve the detection of bacteria and led to a reduction in colony counts.

Rapid separation of bacteria from primary nasal samples using inertial microfluidics

Microbial populations play a crucial role in human health and the development of many diseases. These diseases often arise from the explosive proliferation of opportunistic bacteria, such as those in the nasal cavity. Recently, there have been increases in the prevalence of these opportunistic pathogens displaying antibiotic resistance. Thus, the study of the nasal microbiota and its bacterial diversity is critical in understanding pathogenesis and developing microbial-based therapies for well-known and emerging diseases. However, the isolation and analysis of these populations for clinical study complicates the already challenging task of identifying and profiling potentially harmful bacteria. Existing methods are limited by low sample throughput, expensive labeling, and low recovery of bacteria with ineffective removal of cells and debris. In this study, we propose a novel microfluidic channel with a zigzag configuration for enhanced isolation and detection of bacteria from human clinical nasal swabs. This microfluidic zigzag channel separates the bacteria from epithelial cells and debris by size differential focusing. As such, pure bacterial cell fractions devoid of large contaminating debris or epithelial cells are obtained. DNA sequencing performed on the separated bacteria defines the diversity and species present. This novel method of bacterial separation is simple, robust, rapid, and cost-effective and has the potential to be used for the rapid identification of bacterial cell populations from clinical samples.

Matching amino acids membrane preference profile to improve activity of antimicrobial peptides

Antimicrobial peptides (AMPs) are cationic antibiotics that can kill multidrug-resistant bacteria via membrane insertion. However, their weak activity limits their clinical use. Ironically, the cationic charge of AMPs is essential for membrane binding, but it obstructs membrane insertion. In this study, we postulate that this problem can be overcome by locating cationic amino acids at the energetically preferred membrane surface. All amino acids have an energetically preferred or less preferred membrane position profile, and this profile is strongly related to membrane insertion. However, most AMPs do not follow this profile. One exception is protegrin-1, a powerful but neglected AMP. In the present study, we found that a potent AMP, WCopW5, strongly resembles protegrin-1 and that the match between its sequence and the preferred position profile closely correlates with its antimicrobial activity. One of its derivatives, WCopW43, has antimicrobial activity comparable to that of the most effective AMPs in clinical use.

Fast detection of bacterial contamination in fresh produce using FTIR and spectral classification

Screening for microbial contaminants in fresh produce is a lengthy process relative to their short shelf-life. The aim of this study is to develop a comprehensive assay which employs FTIR and spectral classification algorithm for detection of bacterial contamination of fresh produce. The procedure starts by soaking a sample of the fresh produce in broth for 5 h. Then, magnetic nanoparticles are added to capture bacteria which are then collected and prepared for FTIR scanning. The generated FTIR spectra are compared against an in-house database of different bacterial species (n = 6). The ability of the database to discriminate contaminated and uncontaminated samples and to identify the bacterial species was assessed. The compatibility of the FTIR procedures with subsequent DNA extraction and PCR was tested. The developed procedure was applied for assessment of bacterial contamination in fresh produce samples from the market (n = 78). Results were compared to the conventional culture methods. The generated FTIR database coupled to spectral classification was able to detect bacterial contamination with overall accuracy exceeding 90%. The sample processing did not alter the integrity of the bacterial DNA which was suitable for PCR. On application to fresh produce samples collected from the market, the developed method was able to detect bacterial contamination with 94% concordance with the culture method. In conclusion, the developed procedure can be applied for fast detection of microbial contamination in fresh produce with comparable accuracy to conventional microbiological assays and is compatible with subsequent molecular assays.

A Continuous Microfluidic Concentrator for High-Sensitivity Detection of Bacteria in Water Sources

Water contamination is a critical issue that threatens global public health. To enable the rapid and precise monitoring of pathogen contamination in drinking water, a concentration technique for bacterial cells is required to address the limitations of current detection methods, including the culture method and polymerase chain reaction. Here we present a viscoelastic microfluidic device for the continuous concentration of bacterial cells. To validate the device performance for cell concentration, the flow characteristics of 2-μm particles were estimated in viscoelastic fluids at different concentrations and flow rates. Based on the particle flow distributions, the flow rate factor, which is defined as the ratio of the inlet flow rate to the outlet flow rate at the center outlet, was optimized to achieve highly concentrated bacterial cells by removal of the additional suspending medium. The flow characteristics of 0.5-, 0.7-, and 1.0-μm-diameter particles were evaluated to consider the effect of a wide spectrum of bacterial size distribution. Finally, the concentration factor of bacterial cells, Staphylococcus aureus, suspended in a 2000-ppm polyethylene oxide solution was found to be 20.6-fold at a flow rate of 20 μL/min and a flow rate factor of 40.

Experimental and Analytical Approaches for Improving the Resolution of Randomly Barcoded Transposon Insertion Sequencing (RB-TnSeq) Studies

Randomly barcoded transposon insertion sequencing (RB-TnSeq) is an efficient, multiplexed method to determine microbial gene function during growth under a selection condition of interest. This technique applies to growth, tolerance, and persistence studies in a variety of hosts, but the wealth of data generated can complicate the identification of the most critical gene targets. Experimental and analytical methods for improving the resolution of RB-TnSeq are proposed, using Pseudomonas putida KT2440 as an example organism. Several key parameters, such as baseline media selection, substantially influence the determination of gene fitness. We also present options to increase statistical confidence in gene fitness, including increasing the number of biological replicates and passaging the baseline culture in parallel with selection conditions. These considerations provide practitioners with several options to identify genes of importance in TnSeq data sets, thereby streamlining metabolic characterization.

Use of uncoated magnetic beads to capture Mycobacterium smegmatis and Mycobacterium avium paratuberculosis prior detection by mycobacteriophage D29 and real-time-PCR

Uncoated tosyl-activated magnetic beads were evaluated to capture Mycobacterium smegmatis and Mycobacterium avium subspecies paratuberculosis (MAP) from spiked feces, milk, and urine. Centrifugation and uncoated magnetic beads recovered more than 99% and 93%, respectively, of 1.68 × 10⁷ CFU/mL, 1.68 × 10⁶ CFU/mL and 1.68 × 10⁵ CFU/mL M. smegmatis cells resuspended in phosphate buffer saline. The use of magnetic beads was more efficient to concentrate cells from 1.68 × 10⁴ CFU/mL of M. smegmatis than centrifugation. Likewise, the F57-qPCR detection of MAP cells was different whether they were recovered by beads or centrifugation; cycle threshold (Ct) was lower (p < 0.05) for the detection of MAP cells recovered by beads than centrifugation, indicative of greater recovery. Magnetic separation of MAP cells from milk, urine, and feces specimens was demonstrated by detection of F57 and IS900 sequences. Beads captured no less than 10⁹ CFU/mL from feces and no less than 10⁴ CFU/mL from milk and urine suspensions. In another detection strategy, M. smegmatis coupled to magnetic beads were infected by mycobacteriophage D29. Plaque forming units were observed after 24 h of incubation from urine samples containing 2 × 10⁵ and 2 × 10³ CFU/mL M. smegmatis. The results of this study provide a promising tool for diagnosis of tuberculosis and Johne's disease.

Growth-Dependent Predation and Generalized Transduction of Antimicrobial Resistance by Bacteriophage

Bacteriophage (phage) are both predators and evolutionary drivers for bacteria, notably contributing to the spread of antimicrobial resistance (AMR) genes by generalized transduction. Our current understanding of this complex relationship is limited. We used an interdisciplinary approach to quantify how these interacting dynamics can lead to the evolution of multidrug-resistant bacteria. We cocultured two strains of methicillin-resistant Staphylococcus aureus, each harboring a different antibiotic resistance gene, with generalized transducing phage. After a growth phase of 8 h, bacteria and phage surprisingly coexisted at a stable equilibrium in our culture, the level of which was dependent on the starting concentration of phage. We detected double-resistant bacteria as early as 7 h, indicating that transduction of AMR genes had occurred. We developed multiple mathematical models of the bacteria and phage relationship and found that phage-bacteria dynamics were best captured by a model in which phage burst size decreases as the bacteria population reaches stationary phase and where phage predation is frequency-dependent. We estimated that one in every 10⁸ new phage generated was a transducing phage carrying an AMR gene and that double-resistant bacteria were always predominantly generated by transduction rather than by growth. Our results suggest a shift in how we understand and model phage-bacteria dynamics. Although rates of generalized transduction could be interpreted as too rare to be significant, they are sufficient in our system to consistently lead to the evolution of multidrug-resistant bacteria. Currently, the potential of phage to contribute to the growing burden of AMR is likely underestimated. IMPORTANCE Bacteriophage (phage), viruses that can infect and kill bacteria, are being investigated through phage therapy as a potential solution to the threat of antimicrobial resistance (AMR). In reality, however, phage are also natural drivers of bacterial evolution by transduction when they accidentally carry nonphage DNA between bacteria. Using laboratory work and mathematical models, we show that transduction leads to evolution of multidrug-resistant bacteria in less than 8 h and that phage production decreases when bacterial growth decreases, allowing bacteria and phage to coexist at stable equilibria. The joint dynamics of phage predation and transduction lead to complex interactions with bacteria, which must be clarified to prevent phage from contributing to the spread of AMR.

Two-Dimensional Cell Separation: a High-Throughput Approach to Enhance the Culturability of Bacterial Cells from Environmental Samples

Culture-independent sequence data from various environmental samples have revealed an immense microbial diversity of environmental, clinical, and industrial importance that has not yet been cultured. Cultivation is imperative to validate findings emerging from cultivation-independent molecular data and exploit the isolated organisms for biotechnological purposes. Efforts have been made to boost the cultivability of microbes from environmental samples by use of a range of techniques and instrumentation. The manuscript presents a novel yet simple and innovative approach to improving the cultivability of natural microorganisms without sophisticated instrumentation. By employing gradient centrifugation combined with serial dilution (“two-dimensional cell separation”), significantly higher numbers of genera (>2-fold higher) and species (>3-fold higher) were isolated from environmental samples, including soil, anaerobic sludge, and landfill leachate, than from using serial dilution alone. This simple and robust protocol can be modified for any environment and culture medium and provides access to untapped microbial diversity.

IMPORTANCE In the manuscript, we have developed a novel yet simple and innovative approach to improving the cultivability of natural microorganisms without sophisticated instrumentation. The method used gradient centrifugation combined with serial dilution (two-dimensional cell separation) to improve taxum recovery from samples. This simple and robust protocol can be modified for any environment and culture medium and provides access to untapped microbial diversity. This approach can be incorporated with less labor and complexity in laboratories with minimal instrumentation. As cultivation is a workflow that is well suited to lower-resource microbiology labs, we believe improvements in cultivability can increase opportunities for scientific collaborations between low-resource labs and groups focused on high-resource cultivation-independent methodologies.

Conditioning of metal surfaces enhances Shewanella chilikensis adhesion

Microbiologically influenced corrosion and biofouling of steels depend on the adsorption of a conditioning film and subsequent attachment of bacteria. Extracellular deoxyribonucleic acid (eDNA) and amino acids are biologically critical nutrient sources and are ubiquitous in marine environments. However, little is known about their role as conditioning film molecules in early biofilm formation on metallic surfaces. The present study evaluated the capacity for eDNA and amino acids to form a conditioning film on carbon steel (CS), and subsequently, the influence of these conditioning films on bacterial attachment using a marine bacterial strain. Conditioning films of eDNA or amino acids were formed on CS through physical adsorption. Biochemical and microscopic analysis of eDNA conditioning, amino acid conditioning and control CS surfaces demonstrated that organic conditioning surfaces promoted bacterial attachment. The results highlight the importance of conditioning the surface in initial bacterial attachment to steel.

Chewing differences in consumers affect the digestion and colonic fermentation outcomes: In vitro studies

It is important to understand variability in consumer chewing behavior for designing food products that deliver desired functionalities for target consumer segments. In this study, we selected 29 participants, representing...

Flow Cytometric Analysis of Bacterial Protein Synthesis: Monitoring Vitality After Water Treatment

Bacterial vitality after water disinfection treatment was investigated using bio-orthogonal non-canonical amino acid tagging (BONCAT) and flow cytometry (FCM). Protein synthesis activity and DNA integrity (BONCAT–SYBR Green) was monitored in Escherichia coli monocultures and in natural marine samples after UV irradiation (from 25 to 200 mJ/cm²) and heat treatment (from 15 to 45 min at 55°C). UV irradiation of E. coli caused DNA degradation followed by the decrease in protein synthesis within a period of 24 h. Heat treatment affected both DNA integrity and protein synthesis immediately, with an increased effect over time. Results from the BONCAT method were compared with results from well-known methods such as plate counts (focusing on growth) and LIVE/DEAD™ BacLight™ (focusing on membrane permeability). The methods differed somewhat with respect to vitality levels detected in bacteria after the treatments, but the results were complementary and revealed that cells maintained metabolic activity and membrane integrity despite loss of cell division. Similarly, analysis of protein synthesis in marine bacteria with BONCAT displayed residual activity despite inability to grow or reproduce. Background controls (time zero blanks) prepared using different fixatives (formaldehyde, isopropanol, and acetic acid) and several different bacterial strains revealed that the BONCAT protocol still resulted in labeled, i.e., apparently active, cells. The reason for this is unclear and needs further investigation to be understood. Our results show that BONCAT and FCM can detect, enumerate, and differentiate bacterial cells after physical water treatments such as UV irradiation and heating. The method is reliable to enumerate and explore vitality of single cells, and a great advantage with BONCAT is that all proteins synthesized within cells are analyzed, compared to assays targeting specific elements such as enzyme activity.

Exposure of Brassica to Red Light Antagonizes Low Production of IAA in Leaf Through Root Signaling Under Stress Conditions

Plant leaf is highly sensitive to various growth promoting and restraining components. This sensitivity is normally caused by the alteration of different phyto-hormones (predominately by IAA), when the plants exposed to certain environmental conditions. We exposed the hydroponically grown Brassica campestris seedlings (7 days old) to red and green light in order to observe its effect on IAA secretion at leaf. The evaluated data showed that red light antagonized the low production of IAA in leaf by initiating the root signaling through flavonoids production and high redox activity. The study also explored the link between the differential phytohormonal response and biotic or abiotic stress elimination in leaf through root signaling under green or red light. The results exhibited that the biotic (P. syringae or F. alni) or abiotic stresses (100 mM AgNO₃ or 100 mM tert-butyl alcohol) inhibited flavonoids at the roots and resisted the restoration of IAA at the leaf. However, under green light where IAA was not inhibited, the stresses could not produce flavonoid at the root and further passing the signals to leaf. The results concluded that the growth and photosynthetic rates of the seedlings were improved under red light exposure through flavonoid inducing stresses.

Evaluating acute toxicity in enriched nitrifying cultures: Lessons learned

Toxicological batch assays are essential to assess a compound's acute effect on microorganisms. This methodology is frequently employed to evaluate the effect of contaminants in sensitive microbial communities from wastewater treatment plants (WWTPs), such as autotrophic nitrifying populations. However, despite nitrifying batch assays being commonly mentioned in the literature, their experimental design criteria are rarely reported or overlooked. Here, we found that slight deviations in culture preparations and conditions impacted bacterial community performance and could skew assay results. From pre-experimental trials and experience, we determined how mishandling and treatment of cultures could affect nitrification activity. While media and biomass preparations are needed to establish baseline conditions (e.g., biomass washing), we found extensive centrifugation selectively destabilised nitrification activities. Further, it is paramount that the air supply is adjusted to minimise nitrite build-up in the culture and maintain suitable aeration levels without sparging ammonia. DMSO and acetone up to 0.03% (v/v) were suitable organic solvents with minimal impact on nitrification activity. In the nitrification assays with allylthiourea (ATU), dilute cultures exhibited more significant inhibition than concentrated cultures. So there were biomass-related effects; however, these differences minimally impacted the EC₅₀ values. Using different nutrient-media compositions had a minimal effect; however, switching mineral media for the toxicity test from the original cultivation media is not recommended because it reduced the original biomass nitrification capacity. Our results demonstrated that these factors substantially impact the performance of the nitrifying inoculum used in acute bioassays, and consequently, affect the response of AOB-NOB populations during the toxicant exposure. These are not highlighted in operation standards, and unfortunately, they can have significant consequential impacts on the determinations of toxicological endpoints. Moreover, the practical procedures tested here could support other authors in developing testing methodologies, adding quality checks in the experimental framework with minimal waste of time and resources.

Paving the Way to Overcome Antifungal Drug Resistance: Current Practices and Novel Developments for Rapid and Reliable Antifungal Susceptibility Testing

The past year has established the link between the COVID-19 pandemic and the global spread of severe fungal infections; thus, underscoring the critical need for rapid and realizable fungal disease diagnostics. While in recent years, health authorities, such as the Centers for Disease Control and Prevention, have reported the alarming emergence and spread of drug-resistant pathogenic fungi and warned against the devastating consequences, progress in the diagnosis and treatment of fungal infections is limited. Early diagnosis and patient-tailored therapy are established to be key in reducing morbidity and mortality associated with fungal (and cofungal) infections. As such, antifungal susceptibility testing (AFST) is crucial in revealing susceptibility or resistance of these pathogens and initiating correct antifungal therapy. Today, gold standard AFST methods require several days for completion, and thus this much delayed time for answer limits their clinical application. This review focuses on the advancements made in developing novel AFST techniques and discusses their implications in the context of the practiced clinical workflow. The aim of this work is to highlight the advantages and drawbacks of currently available methods and identify the main gaps hindering their progress toward clinical application.

A needle tip CCEA microfluidic device based on enhanced Dean flow for cell washing

Particle/cell washing is an essential technique in biological and clinical manipulations. Herein, we propose a novel circular contraction-expansion array (CCEA) microdevice. It can be directly connected to a needle tip without connection tubes. Its small size and centrosymmetric structure are beneficial to low sample consumption, high connection stability, and a wide application range. Computational fluid dynamics (CFD) simulation results show that the CCEA structure can produce a stronger Dean flow and lead to faster particle/cell focusing than the circle structure and CEA structure with the same length. Experimentally, an optimal flow rate ratio of 1:3 and an optimal total flow rate of 120 μL/min were found to ensure a stable fluid distribution. Under these conditions, rapid focusing of 10-20 μm particles with high efficiencies was achieved. Compared with a normal CEA device using tubes, the particle loss rate could be reduced from 64 to 7% when washing 500 μL of a rare sample. Cell suspensions with concentrations from 3 × 105/mL to 1 × 103/mL were tested. The high cell collection efficiency (>85% for three cell lines) and stable waste removal efficiency (>80%) reflected the universality of the CCEA microfluidic device. After the washing, the cell activities of H1299 cells and MCF-7 cells were calculated to be 93.8 and 97.5%, respectively. This needle-tip CCEA microfluidic device showed potential in basic medical research and clinical diagnosis.

Method for concentrating viable microorganisms for microbial load determination and eliminating uncertainty from matrix effects from urine and whole blood

The ability to assess and eliminate the matrix effect in bioanalytical methods is critical for reproducibility, but sample preparation procedures necessary to address the matrix effect for microbiological methods could be significantly different if viable pathogens are required for downstream microbiological response analysis. A pure bacterial culture remains essential for virulence, antibiotic susceptibility, and phenotypic response studies in order to facilitate the understanding and treatment of caused diseases. Bacterial culture involves the collection, inoculation, incubation, growth, and detection of viable organisms while avoiding contamination throughout the entire process. The goal of this method is to concentrate viable pathogens directly from clinical specimens such as whole blood and urine while removing most interfering matrix components through pelleting in an enriched media, which is designed to facilitate the growth of clinically relevant microorganisms. Nonselective culture media with no inhibitors is used to permit the growth of most of the microorganisms present in the clinical samples studied. Most of the species implicated in clinical infections are mesophilic bacterial species, so the pelleting procedure is conducted at medium temperatures of 37°C to facilitate optimal growth.•Viable bacterial pelleting for phenotypic response analysis.•Concentration of bacteria by centrifugation and matrix component removal for direct-from-specimen molecular analysis.•Viable pathogen recovery directly from whole blood and urine.

X-Ray Photoelectron Spectroscopy on Microbial Cell Surfaces: A Forgotten Method for the Characterization of Microorganisms Encapsulated With Surface-Engineered Shells

Encapsulation of single microbial cells by surface-engineered shells has great potential for the protection of yeasts and bacteria against harsh environmental conditions, such as elevated temperatures, UV light, extreme pH values, and antimicrobials. Encapsulation with functionalized shells can also alter the surface characteristics of cells in a way that can make them more suitable to perform their function in complex environments, including bio-reactors, bio-fuel production, biosensors, and the human body. Surface-engineered shells bear as an advantage above genetically-engineered microorganisms that the protection and functionalization added are temporary and disappear upon microbial growth, ultimately breaking a shell. Therewith, the danger of creating a "super-bug," resistant to all known antimicrobial measures does not exist for surface-engineered shells. Encapsulating shells around single microorganisms are predominantly characterized by electron microscopy, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, particulate micro-electrophoresis, nitrogen adsorption-desorption isotherms, and X-ray diffraction. It is amazing that X-ray Photoelectron Spectroscopy (XPS) is forgotten as a method to characterize encapsulated yeasts and bacteria. XPS was introduced several decades ago to characterize the elemental composition of microbial cell surfaces. Microbial sample preparation requires freeze-drying which leaves microorganisms intact. Freeze-dried microorganisms form a powder that can be easily pressed in small cups, suitable for insertion in the high vacuum of an XPS machine and obtaining high resolution spectra. Typically, XPS measures carbon, nitrogen, oxygen and phosphorus as the most common elements in microbial cell surfaces. Models exist to transform these compositions into well-known, biochemical cell surface components, including proteins, polysaccharides, chitin, glucan, teichoic acid, peptidoglycan, and hydrocarbon like components. Moreover, elemental surface compositions of many different microbial strains and species in freeze-dried conditions, related with zeta potentials of microbial cells, measured in a hydrated state. Relationships between elemental surface compositions measured using XPS in vacuum with characteristics measured in a hydrated state have been taken as a validation of microbial cell surface XPS. Despite the merits of microbial cell surface XPS, XPS has seldom been applied to characterize the many different types of surface-engineered shells around yeasts and bacteria currently described in the literature. In this review, we aim to advocate the use of XPS as a forgotten method for microbial cell surface characterization, for use on surface-engineered shells encapsulating microorganisms.

Environmental dissolved DNA harbours meaningful biological information on microbial community structure

Extracellular DNA (eDNA) comprises all the DNA molecules outside cells. This component of microbial ecosystems may serve as a source of nutrients and genetic information. Hypersaline environments harbour one of the highest concentrations of eDNA reported for natural systems, which has been attributed to the physicochemical preservative effect of salts and to high viral abundance. Here, we compared centrifugation and filtration protocols for the extraction of dissolved DNA (dDNA, as opposed to eDNA that also includes DNA from free viral particles) from a solar saltern crystallizer pond (CR30) water sample. The crystallizer dDNA fraction has been characterized, for the first time, and compared with cellular and viral metagenomes from the same location. High-speed centrifugation affected CR30 dDNA concentration and composition due to cell lysis, highlighting that protocol optimization should be the first step in dDNA studies. Crystallizer dDNA, which accounted for lower concentrations than those previously reported for hypersaline anoxic sediments, had a mixed viral and cellular origin, was enriched in archaeal DNA and had a distinctive taxonomic composition compared to that from the cellular assemblage of the same sample. Bioinformatic analyses indicated that nanohaloarchaeal viruses could be a cause for these differences.

Electrical Characterization of Cellulose-Based Membranes towards Pathogen Detection in Water

Paper substrates are promising for development of cost-effective and efficient point-of-care biosensors, essential for public healthcare and environmental diagnostics in emergency situations. Most paper-based biosensors rely on the natural capillarity of paper to perform qualitative or semi-quantitative colorimetric detections. To achieve quantification and better sensitivity, technologies combining paper-based substrates and electrical detection are being developed. In this work, we demonstrate the potential of electrical measurements by means of a simple, parallel-plate electrode setup towards the detection of whole-cell bacteria captured in nitrocellulose (NC) membranes. Unlike current electrical sensors, which are mostly integrated, this plug and play system has reusable electrodes and enables simple and fast bacterial detection through impedance measurements. The characterized NC membrane was subjected to (i) a biofunctionalization, (ii) different saline solutions modelling real water samples, and (iii) bacterial suspensions of different concentrations. Bacterial detection was achieved in low conductivity buffers through both resistive and capacitive changes in the sensed medium. To capture Bacillus thuringiensis, the model microorganism used in this work, the endolysin cell-wall binding domain (CBD) of Deep-Blue, a bacteriophage targeting this bacterium, was integrated into the membranes as a recognition bio-interface. This experimental proof-of-concept illustrates the electrical detection of 10⁷ colony-forming units (CFU) mL⁻¹ bacteria in low-salinity buffers within 5 min, using a very simple setup. This offers perspectives for affordable pathogen sensors that can easily be reconfigured for different bacteria. Water quality testing is a particularly interesting application since it requires frequent testing, especially in emergency situations.

Chitin Degradation Machinery and Secondary Metabolite Profiles in the Marine Bacterium Pseudoalteromonas rubra S4059

Genome mining of pigmented Pseudoalteromonas has revealed a large potential for the production of bioactive compounds and hydrolytic enzymes. The purpose of the present study was to explore this bioactivity potential in a potent antibiotic and enzyme producer, Pseudoalteromonas rubra strain S4059. Proteomic analyses (data are available via ProteomeXchange with identifier PXD023249) indicated that a highly efficient chitin degradation machinery was present in the red-pigmented P. rubra S4059 when grown on chitin. Four GH18 chitinases and two GH20 hexosaminidases were significantly upregulated under these conditions. GH19 chitinases, which are not common in bacteria, are consistently found in pigmented Pseudoalteromonas, and in S4059, GH19 was only detected when the bacterium was grown on chitin. To explore the possible role of GH19 in pigmented Pseudoalteromonas, we developed a protocol for genetic manipulation of S4059 and deleted the GH19 chitinase, and compared phenotypes of the mutant and wild type. However, none of the chitin degrading ability, secondary metabolite profile, or biofilm-forming capacity was affected by GH19 deletion. In conclusion, we developed a genetic manipulation protocol that can be used to unravel the bioactive potential of pigmented pseudoalteromonads. An efficient chitinolytic enzyme cocktail was identified in S4059, suggesting that this strain could be a candidate with industrial potential.

Bacterial Redox Potential Powers Controlled Radical Polymerization

Microbes employ a remarkably intricate electron transport system to extract energy from the environment. The respiratory cascade of bacteria culminates in the terminal transfer of electrons onto higher redox potential acceptors in the extracellular space. This general and inducible mechanism of electron efflux during normal bacterial proliferation leads to a characteristic fall in bulk redox potential (E_h), the degree of which is dependent on growth phase, the microbial taxa, and their physiology. Here, we show that the general reducing power of bacteria can be subverted to induce the abiotic production of a carbon-centered radical species for targeted bioorthogonal molecular synthesis. Using two species, Escherichia coli and Salmonella enterica serovar Typhimurium as model microbes, a common redox active aryldiazonium salt is employed to intervene in the terminal respiratory electron flow, affording radical production that is mediated by native redox-active molecular shuttles and active bacterial metabolism. The aryl radicals are harnessed to initiate and sustain a bioorthogonal controlled radical polymerization via reversible addition-fragmentation chain transfer (BacRAFT), yielding a synthetic extracellular matrix of "living" vinyl polymers with predetermined molecular weight and low dispersity. The ability to interface the ubiquitous reducing power of bacteria into synthetic materials design offers a new means for creating engineered living materials with promising adaptive and self-regenerative capabilities.

Highly efficient and scalable biomarker preconcentrator based on nanoelectrokinetics

Micro/nanofluidics are excellent candidates for biological sample preparation. However, the limited process volume in micro/nanofluidics is the main hurdle limiting their practical applications. To date, most micro/nanofluidics have processed sample volumes of several microliters and have rarely been used to handle large-volume samples. Herein, we propose a microfluidic paper-based large-volume preconcentrator (u-LVP) for enrichment and purification of biomarkers (e.g., miRNA) using ion concentration polarization. A Nafion (ion-selective nanoporous membrane)-functionalized multilayer cellulose paper enables microscale division of milliliter-scale samples, thus electrokinetically separating and preconcentrating the biomarker in different locations within the u-LVP. By inserting collecting discs at optimal positions in the u-LVP, the enriched biomarker is simply recovered with high efficiency. With this approach, as an exemplary biomarker, miRNA-21 in human serum was separated from proteins and preconcentrated with an effective preconcentration factor exceeding 6.63 and a recovery rate above 84%. Thus, our platform offers new opportunities and benefits for biomarker, diagnostic, prognostic, and therapeutic research.

Proteomic analysis and optimized production of Alkalihalobacillus patagoniensis PAT 05T extracellular proteases

Extracellular proteolytic extracts from the haloalkalitolerant strain Alkalihalobacillus patagoniensis PAT 05^T have proved highly efficient to reduce wool felting, as part of an ecofriendly treatment suitable for organic wool. In the present study, we identified the extracellular proteases produced by PAT 05^T and we optimized its growth conditions for protease production through statistical methods. A total of 191 proteins were identified in PAT 05^T culture supernatants through mass spectrometry analysis. Three of the 6 detected extracellular proteases belonged to the serine-endopeptidase family S8 (EC 3.4.21); two of them showed 86.3 and 67.9% identity with an alkaline protease from Bacillus alcalophilus and another one showed 50.4% identity with Bacillopeptidase F. The other 3 proteases exhibited 55.3, 49.4 and 61.1% identity with D-alanyl-D-alanine carboxypeptidase DacF, D-alanyl-D-alanine carboxypeptidase DacC and endopeptidase LytE, respectively. Using a Fractional Factorial Design followed by a Central Composite Design optimization, a twofold increase in protease production was reached. NaCl concentration was the most influential factor on protease production. The usefulness of PAT 05^T extracellular proteolytic extracts to reduce wool felting was possible associated with the activity of the serine-endopeptidases closely related to highly alkaline keratinolytic proteases. The other identified proteases could cooperate, improving protein hydrolysis. This study provided valuable information for the exploitation of PAT 05^T proteases which have potential for the valorization of organic wool as well as for other industrial applications.

Mechanically Induced Bacterial Death Imaged in Real Time: A Simultaneous Nanoindentation and Fluorescence Microscopy Study

Mechano-bactericidal nanomaterials rely on their mechanical or physical interactions with bacteria and are promising antimicrobial strategies that overcome bacterial resistance. However, the real effect of mechanical versus chemical action on their activity is under debate. In this paper, we quantify the forces necessary to produce critical damage to the bacterial cell wall by performing simultaneous nanoindentation and fluorescence imaging of single bacterial cells. Our experimental setup allows puncturing the cell wall of an immobilized bacterium with the tip of an atomic force microscope (AFM) and following in real time the increase in the fluorescence signal from a cell membrane integrity marker. We correlate the forces exerted by the AFM tip with the fluorescence dynamics for tens of cells, and we find that forces above 20 nN are necessary to exert critical damage. Moreover, a similar experiment is performed in which bacterial viability is assessed through physiological activity, in order to gain a more complete view of the effect of mechanical forces on bacteria. Our results contribute to the quantitative understanding of the interaction between bacteria and nanomaterials.

Direct and Fast Assessment of Antimicrobial Surface Activity Using Molecular Dynamics Simulation and Time-Lapse Imaging

With the alarming rise of antimicrobial resistance, studies on bacteria-surface interactions are both relevant and timely. Scanning electron microscopy and colony forming unit counting are commonly used techniques but require sophisticated sample preparation and long incubation time. Here, we present a direct method based on molecular dynamics simulation of nanostructured surfaces providing in silico predictions, complemented with time-lapse fluorescence imaging to study live interactions of bacteria at the membrane-substrate level. We evaluate its effectiveness in predicting and statistically analyzing the temporal evolution and spatial distribution of prototypical bacteria with costained nucleoids and membranes (E. coli) on surfaces with nanopillars. We observed cell reorientation, clustering, membrane damage, growth inhibition, and in the extreme case of hydrocarbon-coated nanopillars, this was followed by cell disappearance, validating the obtained simulation results. Contrary to commonly used experimental methods, microscopy data are fast processed, in less than 1 h. In particular, the bactericidal effects can be straightforwardly detected and correlated with surface morphology and/or wettability.

High density cultivation for efficient sesquiterpenoid biosynthesis in Synechocystis sp. PCC 6803

Cyanobacteria and microalgae are attractive photoautotrophic host systems for climate-friendly production of fuels and other value-added biochemicals. However, for economic applications further development and implementation of efficient and sustainable cultivation strategies are essential. Here, we present a comparative study on cyanobacterial sesquiterpenoid biosynthesis in Synechocystis sp. PCC 6803 using a commercial lab-scale High Density Cultivation (HDC) platform in the presence of dodecane as in-situ extractant. Operating in a two-step semi-batch mode over a period of eight days, volumetric yields of (E)-α-bisabolene were more than two orders of magnitude higher than previously reported for cyanobacteria, with final titers of 179.4 ± 20.7 mg * L⁻¹. Likewise, yields of the sesquiterpene alcohols (−)-patchoulol and (−)-α-bisabolol were many times higher than under reference conditions, with final titers of 17.3 ± 1.85 mg * L⁻¹ and 96.3 ± 2.2 mg * L⁻¹, respectively. While specific productivity was compromised particularly for (E)-α-bisabolene in the HDC system during phases of high biomass accumulation rates, volumetric productivity enhancements during linear growth at high densities were more pronounced for (E)-α-bisabolene than for the hydroxylated terpenoids. Together, this study provides additional insights into cell density-related process characteristics, introducing HDC as highly efficient strategy for phototrophic terpenoid production in cyanobacteria.

Rare microbial taxa emerge when communities collide: freshwater and marine microbiome responses to experimental mixing

Whole microbial communities regularly merge with one another, often in tandem with their environments, in a process called community coalescence. Such events impose substantial changes: abiotic perturbation from environmental blending and biotic perturbation of community merging. We used an aquatic mixing experiment to unravel the effects of these perturbations on the whole microbiome response and on the success of individual taxa when distinct freshwater and marine communities coalesce. We found that an equal mix of freshwater and marine habitats and blended microbiomes resulted in strong convergence of the community structure toward that of the marine microbiome. The enzymatic potential of these blended microbiomes in mixed media also converged toward that of the marine, with strong correlations between the multivariate response patterns of the enzymes and of community structure. Exposing each endmember inocula to an axenic equal mix of their freshwater and marine source waters led to a 96% loss of taxa from our freshwater microbiomes and a 66% loss from our marine microbiomes. When both inocula were added together to this mixed environment, interactions amongst the communities led to a further loss of 29% and 49% of freshwater and marine taxa, respectively. Under both the axenic and competitive scenarios, the diversity lost was somewhat counterbalanced by increased abundance of microbial taxa that were too rare to detect in the initial inocula. Our study emphasizes the importance of the rare biosphere as a critical component of microbial community responses to community coalescence.

Fluorescence in situ hybridization (FISH) and cell sorting of living bacteria

Despite the development of several cultivation methods, the rate of discovery of microorganisms that are yet-to-be cultivated outpaces the rate of isolating and cultivating novel species in the laboratory. Furthermore, no current cultivation technique is capable of selectively isolating and cultivating specific bacterial taxa or phylogenetic groups independently of morphological or physiological properties. Here, we developed a new method to isolate living bacteria solely based on their 16S rRNA gene sequence. We showed that bacteria can survive a modified version of the standard fluorescence in situ hybridization (FISH) procedure, in which fixation is omitted and other factors, such as centrifugation and buffers, are optimized. We also demonstrated that labelled DNA probes can be introduced into living bacterial cells by means of chemical transformation and that specific hybridization occurs. This new method, which we call live-FISH, was then combined with fluorescence-activated cell sorting (FACS) to sort specific taxonomic groups of bacteria from a mock and natural bacterial communities and subsequently culture them. Live-FISH represents the first attempt to systematically optimize conditions known to affect cell viability during FISH and then to sort bacterial cells surviving the procedure. No sophisticated probe design is required, making live-FISH a straightforward method to be potentially used in combination with other single-cell techniques and for the isolation and cultivation of new microorganisms.

Low-cost multi-core inertial microfluidic centrifuge for high-throughput cell concentration

We developed a low-cost multi-core inertial microfluidic centrifuge (IM-centrifuge) to achieve a continuous-flow cell/particle concentration at a throughput of up to 20 mL/min. To lower the cost of our IM-centrifuge, we clamped a disposable multilayer film-based inertial microfluidic (MFIM) chip with two reusable plastic housings. The key MFIM chip was fabricated in low-cost materials by stacking different polymer-film channel layers and double-sided tape. To increase processing throughput, multiplexing spiral inertial microfluidic channels were integrated within an all-in-one MFIM chip, and a novel sample distribution strategy was employed to equally distribute the sample into each channel layer. Then, we characterized the focusing performance in the MFIM chip over a wide flow-rate range. The experimental results showed that our IM-centrifuge was able to focus various-sized particles/cells to achieve volume reduction. The sample distribution strategy also effectively ensured identical focusing and concentration performances in different cores. Finally, our IM-centrifuge was successfully applied to concentrate microalgae cells with irregular shapes and highly polydisperse sizes. Thus, our IM-centrifuge holds the potential to be employed as a low-cost, high-throughput centrifuge for disposable use in low-resource settings.