New medium for improved recovery of coliform bacteria from drinking water

Self-defense of Escherichia coli against damages caused by nanoalumina

Although studies showed effects of nanoalumina (nano-Al₂O₃) on Escherichia coli, no study completely provides understanding on how bacterial cells respond to damages, especially on how they initiate self-defense. In this study, we showed three types of responses of E. coli to damages caused by nano-Al₂O₃. Live, dead, and injured, bacteria showed improved survival rates reaching 104%, 116%, and 104% after exposure to 0.1, 1, and 10mmol/L of nano-Al₂O₃ respectively. Survival rates improved from 100% to 114%, corresponding to an exposure time of 0-9h, and from 100% to 127%, corresponding to 0-1000μg/L Al³⁺. Improvements were noted in survival rates of E. coli K12 MG1655, HB101, DH5α, and K12 MG1655 △lexA treated by nano-Al₂O₃ in Luria-Bertani (LB) exposure system or K12 MG1655 in LB, normal saline(NS) and H₂O exposure system. Bacterial cells transformed from long rods to ellipsoidal or nearly spherical as form of self-preservation mechanism; this phenomenon may be related to changes in membrane potential induced by free Al³⁺ released from nano-Al₂O₃ particles. Molecular mechanism of this response involved inhibited gene expression of sythesis and metabolism of carbohydrates, lipids and proteins. Findings presented in this study may improve understanding of potential danger of nanomaterials and control their spread to environmen.

The impact of culturomics on taxonomy in clinical microbiology

Over the past decade, new culture methods coupled to genome and metagenome sequencing have enabled the number of isolated bacterial species with standing in nomenclature to rise to more than 15,000 whereas it was only 1791 in 1980. 'Culturomics', a new approach based on the diversification of culture conditions, has enabled the isolation of more than 1000 distinct human-associated bacterial species since 2012, including 247 new species. This strategy was demonstrated to be complementary to metagenome sequencing for the exhaustive study of the human microbiota and its roles in health and diseases. However, by identifying a large number of new bacterial species in a short time, culturomics has highlighted a need for taxonomic approaches adapted to clinical microbiology that would include the use of modern and reproducible tools, including high throughput genomic and proteomic analyses. Herein, we review the development of culturomics and genomics in the clinical microbiology field and their impact on bacterial taxonomy.

Natural inactivation of Escherichia coli in anaerobic and reduced groundwater

AIMS

Inactivation rates of Escherichia coli in groundwater have most often been determined in aerobic and oxidized systems. This study examined E. coli inactivation rates in anaerobic and extremely reduced groundwater systems that have been identified as recharge zones.

METHODS AND RESULTS

Groundwater from six artesian wells was diverted to above-ground, flow-through mesocosms that contained laboratory grown E. coli in diffusion chambers. All groundwater was anaerobic and extremely reduced (ORP < -300 mV). Cells were plated onto mTEC agar during 21-day incubation periods. All data fit a bi-phasic inactivation model, with >95% of the E. coli population being inactivated <11·0 h (mean k = 0·488 ±0·188 h(-1) ).

CONCLUSIONS

The groundwater geochemical conditions enhanced the inactivation of E. coli to rates approx. 21-fold greater than previously published inactivation rate in groundwater (mean k = 0·023 ± 0·030 h(-1) ). Also, mTEC agar inhibits E. coli growth following exposure to anaerobic and reduced groundwater.

SIGNIFICANCE AND IMPACT OF THE STUDY

Aquifer recharge zones with geochemical characteristics observed in this study complement above-ground engineered processes (e.g. filtration, disinfection), while increasing the overall indicator micro-organism log-reduction rate of a facility.

Current and past strategies for bacterial culture in clinical microbiology

A pure bacterial culture remains essential for the study of its virulence, its antibiotic susceptibility, and its genome sequence in order to facilitate the understanding and treatment of caused diseases. The first culture conditions empirically varied incubation time, nutrients, atmosphere, and temperature; culture was then gradually abandoned in favor of molecular methods. The rebirth of culture in clinical microbiology was prompted by microbiologists specializing in intracellular bacteria. The shell vial procedure allowed the culture of new species of Rickettsia. The design of axenic media for growing fastidious bacteria such as Tropheryma whipplei and Coxiella burnetii and the ability of amoebal coculture to discover new bacteria constituted major advances. Strong efforts associating optimized culture media, detection methods, and a microaerophilic atmosphere allowed a dramatic decrease of the time of Mycobacterium tuberculosis culture. The use of a new versatile medium allowed an extension of the repertoire of archaea. Finally, to optimize the culture of anaerobes in routine bacteriology laboratories, the addition of antioxidants in culture media under an aerobic atmosphere allowed the growth of strictly anaerobic species. Nevertheless, among usual bacterial pathogens, the development of axenic media for the culture of Treponema pallidum or Mycobacterium leprae remains an important challenge that the patience and innovations of cultivators will enable them to overcome.

Occurrence, molecular characterization and antibiogram of water quality indicator bacteria in river water serving a water treatment plant

Water pollution by microorganisms of fecal origin is a current world-wide public health concern. Total coliforms, fecal coliforms (Escherichia coli) and enterococci are indicators commonly used to assess the microbiological safety of water resources. In this study, influent water samples and treated water were collected seasonally from a water treatment plant and two major water wells in a Black Belt county of Alabama and evaluated for water quality indicator bacteria. Influent river water samples serving the treatment plant were positive for total coliforms, fecal coliforms (E. coli), and enterococci. The highest number of total coliform most probable number (MPN) was observed in the winter (847.5 MPN/100 mL) and the lowest number in the summer (385.6 MPN/100 mL). Similarly E. coli MPN was substantially higher in the winter (62.25 MPN/100 mL). Seasonal variation of E. coli MPN in influent river water samples was strongly correlated with color (R(2)=0.998) and turbidity (R(2)=0.992). Neither E. coli nor other coliform type bacteria were detected in effluent potable water from the treatment plant. The MPN of enterococci was the highest in the fall and the lowest in the winter. Approximately 99.7 and 51.5 enterococci MPN/100 mL were recorded in fall and winter seasons respectively. One-way ANOVA tests revealed significant differences in seasonal variation of total coliforms (P<0.05), fecal coliforms (P<0.01) and enterococci (P<0.01). Treated effluent river water samples and well water samples revealed no enterococci contamination. Representative coliform bacteria selected by differential screening on Coliscan Easygel were identified by 16S ribosomal RNA gene sequence analysis. E. coli isolates were sensitive to gentamicin, trimethoprim/sulfamethazole, ciprofloxacin, vancomycin, tetracycline, ampicillin, cefixime, and nitrofurantoin. Nonetheless, isolate BO-54 displayed decreased sensitivity compared to other E. coli isolates. Antibiotic sensitivity pattern can be employed in microbial source tracking.

Liquid flow in biofilm systems

A model biofilm consisting of Pseudomonas aeruginosa, Pseudomonas fluorescens, and Klebsiella pneumoniae was developed to study the relationships between structural heterogeneity and hydrodynamics. Local fluid velocity in the biofilm system was measured by a noninvasive method of particle image velocimetry, using confocal scanning laser microscopy. Velocity profiles were measured in conduit and porous medium reactors in the presence and absence of biofilm. Liquid flow was observed within biofilm channels; simultaneous imaging of the biofilm allowed the liquid velocity to be related to the physical structure of the biofilm.

Inactivation and injury of Escherichia coli in a copper water storage vessel: effects of temperature and pH

Copper has been used as a disinfectant since ancient times and recent research has demonstrated that antimicrobial copper surfaces may have practical applications in healthcare and related areas. The present study was carried out to establish the effects of temperature and pH on inactivation and sub-lethal injury of Escherichia coli in water stored in a copper vessel, to determine the operational limits of the process in terms of these variables. To investigate the effects of temperature, a bacterial suspension at pH 7.0 was stored for up to 48 h in copper vessels at 5, 15, 25 and 35 degrees C. For pH, a bacterial suspension was stored at 30 degrees C for up to 48 h in copper vessels at pH 6.0, 7.0, 8.0 and 9.0. Both temperature and pH had substantial effects on inactivation and injury, with the fastest inactivation observed at elevated temperature and at pH values furthest from neutrality, while the greatest amount of sub-lethal injury, manifest as sensitivity to conventional aerobic enumeration, was observed at a temperature of 35 degrees C. These findings have important implications for the practical application of copper-based water disinfection methods, in terms of their likely efficacy under environmental conditions.

[Groundwater quality in an arid area of Morocco: impact of pollution on the biodiversity and relationships between crustaceans and bacteria of health interest]

In the north of Marrakesh (Morocco), the high anthropogenic activity and the permeable nature of the geological ground makes the water of Jbilet vulnerable to contamination. The results of physico-chemical analyses conducted in 2006 showed that two groups of wells could be distinguished. Groundwater of wells located on the right bank of the Tensift River, which are far from any source of pollution, is of fairly good quality, well oxygenated, at neutral pH and with rather weak levels of organic compounds. In contrast, in the other wells in the area of the landfill of the city of Marrakesh and those in the peri-urban area demonstrate deteriorated water quality. The nutriment and organic matter content is quite high. Results of bacteriological analyses of water showed a fairly high faecal contamination. In this area the soil is highly permeable and promotes infiltration of organic pollutants and minerals as well as of pathogen and opportunistic bacteria into groundwater. After their penetration, these microorganisms form films around grain particles. The movements of the stygofauna in the interstices allow bacteria to settle on their exoskeleton and seep into their gut, thus being a potential source of groundwater contamination. An analysis of bacterial flora showed that the rate of bacteria is high in the digestive tract of two crustacean species of the stygobites Typhlocirolana haouzensis and Metacrangonyx spinicaudatus, and that it depends on the species and the bacteria. Bacteria may be one of the potential nutritional resources for stygobites.

Effects of chlorine level on the growth of biofilm in water pipes

Three analogous laboratory-scale water pipe systems were constructed to study the effects of three chlorine levels of finished water on the growth of biofilm. The experimental results indicated that the heterotrophic plate counts (HPCs) of biofilm for chlorine-free water were approximately 2 and 3 orders of magnitude higher than those for low-chlorine water (0.3-0.5mg Cl2/L) and high-chlorine water (1.2-1.5mg Cl2/L). The difference in HPC levels between low-chlorine water and high-chlorine water was below 1 order. Average biofilm formation rates are 325 ATP pg/cm2-day for chlorine-free water, 159 ATP pg/cm2-day for low-chlorine water and 118 ATP pg/cm2-day for high-chlorine water. The scanning electron microscope (SEM) observation showed that bacterial species separated from the biofilm were more complex than from the finished water. The Gram-negative bacteria were dominant in these species.

Detection and enumeration of coliforms in drinking water: current methods and emerging approaches

The coliform group has been used extensively as an indicator of water quality and has historically led to the public health protection concept. The aim of this review is to examine methods currently in use or which can be proposed for the monitoring of coliforms in drinking water. Actually, the need for more rapid, sensitive and specific tests is essential in the water industry. Routine and widely accepted techniques are discussed, as are methods which have emerged from recent research developments.Approved traditional methods for coliform detection include the multiple-tube fermentation (MTF) technique and the membrane filter (MF) technique using different specific media and incubation conditions. These methods have limitations, however, such as duration of incubation, antagonistic organism interference, lack of specificity and poor detection of slow-growing or viable but non-culturable (VBNC) microorganisms. Nowadays, the simple and inexpensive membrane filter technique is the most widely used method for routine enumeration of coliforms in drinking water.The detection of coliforms based on specific enzymatic activity has improved the sensitivity of these methods. The enzymes beta-D galactosidase and beta-D glucuronidase are widely used for the detection and enumeration of total coliforms and Escherichia coli, respectively. Many chromogenic and fluorogenic substrates exist for the specific detection of these enzymatic activities, and various commercial tests based on these substrates are available. Numerous comparisons have shown these tests may be a suitable alternative to the classical techniques. They are, however, more expensive, and the incubation time, even though reduced, remains too long for same-day results. More sophisticated analytical tools such as solid phase cytometry can be employed to decrease the time needed for the detection of bacterial enzymatic activities, with a low detection threshold. Detection of coliforms by molecular methods is also proposed, as these methods allow for very specific and rapid detection without the need for a cultivation step. Three molecular-based methods are evaluated here: the immunological, polymerase chain reaction (PCR) and in-situ hybridization (ISH) techniques. In the immunological approach, various antibodies against coliform bacteria have been produced, but the application of this technique often showed low antibody specificity. PCR can be used to detect coliform bacteria by means of signal amplification: DNA sequence coding for the lacZ gene (beta-galactosidase gene) and the uidA gene (beta-D glucuronidase gene) has been used to detect total coliforms and E. coli, respectively. However, quantification with PCR is still lacking in precision and necessitates extensive laboratory work. The FISH technique involves the use of oligonucleotide probes to detect complementary sequences inside specific cells. Oligonucleotide probes designed specifically for regions of the 16S RNA molecules of Enterobacteriaceae can be used for microbiological quality control of drinking water samples. FISH should be an interesting viable alternative to the conventional culture methods for the detection of coliforms in drinking water, as it provides quantitative data in a fairly short period of time (6 to 8 h), but still requires research effort. This review shows that even though many innovative bacterial detection methods have been developed, few have the potential for becoming a standardized method for the detection of coliforms in drinking water samples.

A new membrane filtration medium for simultaneous detection and enumeration of Escherichia coli and total coliforms

Recovery of total coliforms and Escherichia coli on a new membrane filtration (MF) medium was evaluated with 25 water samples from seven states. Testing of the new medium, m-ColiBlue24 broth, was conducted according to a U.S. Environmental Protection Agency protocol. For comparison, this same protocol was used to measure recovery of total coliforms and E. coli with two standard MF media, m-Endo broth and mTEC broth. E. coli recovery on the new medium was also compared to recovery on nutrient agar supplemented with 4-methylumbelliferyl-beta-D-glucuronide. Comparison of specificity, sensitivity, false positive error, undetected target error, and overall agreement indicated E. coli recovery on m-ColiBlue24 was superior to recovery on mTEC for all five parameters. Recovery of total coliforms on the new medium was comparable to recovery on m-Endo.

Comparison of selective agars for the isolation and identification of Klebsiella oxytoca and Escherichia coli from environmental drinking water samples

Various selective media were assessed for their ability to detect and differentiate Klebsiella oxytoca and Escherichia coli in environmental water samples. Only two, Membrane Lauryl Sulphate agar and Deoxycholate Agar, could differentiate the two coliforms from each other and from the 'background' heterotrophs in water and this was a consequence of E. coli's ability to grow at 44 degrees C and 37 degrees C whereas Kl. oxytoca could only grow at 37 degrees C. Modified M-FC medium effectively differentiated Kl. oxytoca but not E. coli in environmental samples. Other media characterized the different coliforms in pure culture but failed to do likewise in environmental samples. For example, pure cultures of E. coli fluoresced when MUG was added to the medium but single colonies on a mixed species plate failed to do so. MT7 agar distinguished the two coliforms from water heterotrophs but not from each other.

Liquid flow in heterogeneous biofilms

Liquid flow was studied in aerobic biofilms, consisting of microbial cell clusters (discrete aggregates of densely packed cells) and interstitial voids. Fluorescein microinjection was used as a qualitative technique to determine the presence of flow in cell clusters and voids. Flow velocity profiles were determined by tracking fluorescent latex spheres using confocal microscopy. Liquid was flowing through the voids and was stagnant in the cell clusters. Consequently, in voids both diffusion and convection may contribute to mass transfer, whereas in cell clusters diffusion is the dominant factor. The flow velocity in the biofilm depended on the average flow velocity of the bulk liquid. The velocity profiles in biofilms were linear and the velocity was zero at the substratum surface. The velocity gradients within biofilms were 50% of that near walls without biofilm coverage. The influence of the biofilm roughness on the flow velocity profiles was similar to that caused by rigid roughness elements.

Comparison of respiratory activity and culturability during monochloramine disinfection of binary population biofilms

Biofilm bacteria challenged with monochloramine retained significant respiratory activity, even though they could not be cultured on agar plates. Microbial colony counts on agar media declined by approximately 99.9% after 1 h of disinfection, whereas the number of bacteria stained by a fluorescent redox dye experienced a 93% reduction. Integrated measures of biofilm respiratory activity, including net oxygen and glucose utilization rates, showed only a 10 to 15% reduction. In this biofilm system, measures of microbial respiratory activity and culturability yielded widely differing estimates of biocide efficacy.

Blood agar to detect virulence factors in tap water heterotrophic bacteria

Cytolytic colonies were found in 57% of tap water samples, and up to 6% of samples were found to contain bacteria having three or more virulence factors. The factors evaluated were cytotoxicity, hemolysis, cell adherence, and cell invasiveness. Overall, 17% of the samples contained cytolytic colonies that were adherent and hemolytic. Among the media tested, tryptic soy agar with sheep blood (incubated at 35 degrees C for 48 h) was the best medium for the detection of cytolytic colonies. Of the colonies growing on this medium, 13% were cytolytic, whereas on medium R2A, less than 3% were cytolytic. Furthermore, when tryptic soy agar with blood was used, 24% of the samples contained colonies with at least three virulence factors whereas only 5% were positive with R2A. Routine monitoring by using tryptic soy agar with sheep blood is suggested as an appropriate procedure for the detection of bacteria with pathogenic potential in drinking water.

Improved membrane filtration method incorporating catalase and sodium pyruvate for detection of chlorine-stressed coliform bacteria

In vitro pure culture studies were conducted on three different strains of Escherichia coli (K-12, EPA 00244, and SWEI) to determine the effect of chlorination on catalase activity. In each case, stationary-phase cells exhibited significant (P less than 0.001) reductions in enzyme activity following exposure to chlorine. Mean differences in activity between control and chlorine-stressed cells ranged from 8.8 to 20.3 U/mg of protein for E. coli SWEI and EPA 00244, respectively. Following initial enzyme studies, resuscitation experiments utilizing the membrane filtration technique were conducted on chlorinated sewage effluent. Five different amendments, including catalase (1,000 U per plate), heat-inactivated catalase (1,000-U per plate), sodium pyruvate (0.05%), a catalase-sodium pyruvate combination (1,500 U/0.01%), and acetic acid (0.05%), were tested for the ability to enhance detection of chlorine-stressed cells on M-fecal coliform (M-FC), mT7, M-Endo, and tryptone-glucose-yeast extract (TGY) media. Significant (P less than 0.001) increases in recovery of fecal coliforms on M-FC, total coliforms on mT7 and M-Endo, and total heterotrophs on TGY were obtained on plates containing catalase, pyruvate, or the combination of these compounds. Supplementation with heat-inactivated catalase and acetic acid did not improve recovery of chlorine-stressed cells compared with recovery on nonamended media. Subsequent analysis of colonies from plates containing compounds which enhanced recovery indicated coliform verification percentages of greater than 80% on M-FC, greater than 90% on mT7, and greater than 94% on M-Endo media. These data suggest that the addition of peroxide-degrading compounds to various standard recovery media may improve detection of both coliform and heterotrophic bacteria in chlorinated waters.

Rapid detection of chlorine-induced bacterial injury by the direct viable count method using image analysis

A modified direct viable count method to detect living bacteria was used with image analysis for the rapid enumeration of chlorine-injured cells in an Escherichia coli culture. The method was also used for determining chlorine-induced injury in coliform isolates and enteric pathogenic bacteria. Cultures were incubated in phosphate-buffered saline, containing 0.3% Casamino Acids (Difco Laboratories, Detroit, Mich.), 0.03% yeast extract, and optimal concentrations of nalidixic acid. Samples were withdrawn before and after incubation and stained with acridine orange, and cell lengths and breadths were measured by computerized image analysis. After incubation, cells which exceeded the mean preincubation length (viable cells) were enumerated and the results were compared with those obtained by the plate count method. Injury in the chlorine-exposed cell population was determined from the difference in viable count obtained with a nonselective Casamino Acids-yeast extract-nalidixic acid medium and a selective Casamino Acids-yeast extract-nalidixic acid medium containing sodium deoxycholate or sodium lauryl sulfate. The levels of injury determined by the direct viable count technique by using image analysis were comparable to those determined by the plate count method. The results showed that image analysis, under optimal conditions, enumerated significantly higher numbers of stressed E. coli than the plate count method did and detected injury in various cultures in 4 to 6 h.

New screening test to determine the acceptability of 0.45-micron membrane filters for analysis of water

During routine membrane filter (MF) quality control testing, irregularities such as partial or complete inhibition of microbial growth at grid lines, abnormal spreading of colonies, growth in or along the grid lines, nonwetting areas, poor colony sheen and metallic sheen on the MF surface with mEndo agar, brittleness, decreased recovery, and severe wrinkling were observed with several lots of filters. To study these effects and to develop a more sensitive screening test for MF quality, we compared five different MFs with various types and degrees of defects by using five stock coliform cultures and five different media. Results showed that the Enterobacter aerogenes-tryptic soy agar test system detected more MF defects than any other combination did and was superior to the Escherichia coli-mFC agar American Society for Testing and Materials method for grid line inhibition. Filtered natural samples grown on the same media showed the same effects as were observed with the pure cultures. Poor colony sheen and sheen on the MF surface were best detected with Enterobacter aerogenes on mEndo agar. The use of tryptic soy agar and mEndo agar with this organism permitted the maximum detection of MF irregularities. Of the 142 MF lots tested by this method, 30% were acceptable, 10% were marginally acceptable, and 61% were unacceptable. This method provides a valuable screening test for determining the acceptability of 0.45-microm-pore-size MFs used for coliform and heterotroph analysis and may also be useful in conjunction with other methods.

Enumeration of Enterobacter cloacae after chloramine exposure

Growth of Enterobacter cloacae on various media was compared after disinfection. This was done to examine the effects of monochloramine and chlorine on the enumeration of coliforms. The media used were TLY (nonselective; 5.5% tryptic soy broth, 0.3% yeast extract, 1.0% lactose, and 1.5% Bacto-Agar), m-T7 (selective; developed to recover injured coliforms), m-Endo (selective; contains sodium sulfite), TLYS (TLY with sodium sulfite), and m-T7S (m-T7 with sodium sulfite). Sodium sulfite in any medium improved the recovery of chloramine-treated E. cloacae. However, sodium sulfite in TLYS and m-T7S did not significantly improve the detection of chlorine-treated E. cloacae, and m-Endo was the least effective medium for recovering chlorinated bacteria. Differences in recovery of chlorine- and chloramine-treated E. cloacae are consistent with mechanistic differences between the disinfectants.

Comparison of methods for enumeration of selected coliforms exposed to ozone

mT7 medium performed no better than m-Endo medium in enumerating cells of Escherichia coli and Citrobacter freundii exposed to ozone. Also, there was no difference in the plate count of heterotrophic bacteria in ozonated raw water determined on modified Henrici agar or R2A agar. Statistically significant differences were seen between bacteria and the type of water in which they were suspended during ozonation.

Rapid detection of total and fecal coliforms in water by enzymatic hydrolysis of 4-methylumbelliferone-beta-D-galactoside

Three fluorogenic methylumbelliferone (MU) substrates were evaluated for rapid detection of total and fecal coliform bacteria (TC and FC) in drinking water. 4-MU-beta-D-galactoside, MU-heptanoate, and MU-glucuronide were used to determine enzyme activity as a surrogate measure of coliform concentration. Coliforms occurring in river water and in potable water artificially contaminated with raw sewage were tested. The initial rate of hydrolysis (delta F) of MU-beta-D-galactoside showed promise as an indicator of TC and FC within 15 min. delta F of MU-glucuronide was insufficient in the 15-min assay, and combinations of the MU substrates did not enhance delta F. A direct membrane filter method incorporating MU-beta-D-galactoside into an agar medium allowed the detection of as few as 1 FC per 100 ml within 6 h.

National field evaluation of a defined substrate method for the simultaneous enumeration of total coliforms and Escherichia coli from drinking water: comparison with the standard multiple tube fermentation method

A defined substrate method was developed to simultaneously enumerate total coliforms and Escherichia coli from drinking waters without the need for confirmatory or completed tests. It is a new method based on technology that uses a hydrolyzable substrate as a specific indicator-nutrient for the target microbes. No equipment other than a 35 degrees C incubator and long-wavelength (366-nm) light is necessary. To perform the test, one only has to add water to the powdered ingredients in a tube or flask. If total coliforms are present in the water sample, the solution will change from its normal colorless state (no target microbes present) to yellow. The specific presence of E. coli will cause the same tube to fluoresce under a longwave (366-nm) UV lamp. The test, called Autoanalysis Colilert (AC), was compared with Standard Methods for the Examination of Water and Wastewater 10-tube multiple tube fermentation (MTF) in a national evaluation. Five utilities, representing six U.S. Environmental Protection Agency regions, participated. All water samples came from distribution systems. Split samples from a wide variety of water sources were analyzed for the MPN-versus-MPN comparison. A total of 1,086 tubes were positive by MTF, and 1,279 were positive by AC. There was no statistical difference between MTF and AC. Species identifications from positive tubes confirmed the sensitivity of the AC. A national evaluation of the AC test showed that it: (i) was as sensitive as Standard Methods MTF, (ii) specifically enumerated 1 total coliform per 100 ml, in a maximum of 24 h, (iii) simultaneously enumerated 1 E. coli per 100 ml in the same analysis, (iv) was not subject to false-positive or false-negative results by heterotrophic bacteria, (v) did not require confirmatory tests, (vi) grew injured coliforms, (vii) was easy to inoculate, and (viii) was very easy to interpret.

Short-term variations of bacterioplankton in Antarctic zone: Terre Adelie area

Previous studies on Antarctic seawater have demonstrated the presence of significant numbers of bacteria, but their in situ activity has not been demonstrated. In order to demonstrate this hypothetical activity, a scheduled survey was conducted from January to February 1986 in a coastal area of Adelie Land. Seawater samples were collected in a selected station every day or every hour during a 17 hour period. Bacterial communities in each sample were studied by measuring direct and viable counts, frequency of dividing cells estimation, taxonomic analysis, and heterotrophic potential. Complementary studies used batch cultures with artificial nutrient supplements. The results clearly suggest a strong potential activity of the natural Antarctic bacterial microflora.

A defined substrate technology for the enumeration of microbial indicators of environmental pollution

The examination of water and other environmental sources for microbial pollution is a major public health undertaking. Currently, there are two accepted methods in use: the multiple-tube fermentation (MTF) and the membrane filtration (MF) tests. Both methods are designed to enumerate the secondary indicator group, total coliforms. Both tests suffer several inherent limitations, including a time delay of three to seven days to obtain a definitive result, the subjective nature of the test interpretation, and the inability to provide directly useful public health information. A defined substrate technology, originally used to enumerate specific bacterial species from mixtures in clinical urine specimens, was applied to water testing; the technology was constituted to enumerate simultaneously both total coliforms and the primary indicator bacterium E. coli. Examination of environmental isolates of these two classes of target microbes showed sensitivity equal to available methods, with potentially greater specificity. It was not subject to inhibition by bacteria other than the targets, grew injured coliforms, did not require confirmatory tests, and the maximum time to a positive was 24 hours. The defined substrate technology provides both regulatory and directly useful public health information.

Examination and characterization of distribution system biofilms

Investigations concerning the role of distribution system biofilms on water quality were conducted at a drinking water utility in New Jersey. The utility experienced long-term bacteriological problems in the distribution system, while treatment plant effluents were uniformly negative for coliform bacteria. Results of a monitoring program showed increased coliform levels as the water moved from the treatment plant through the distribution system. Increased coliform densities could not be accounted for by growth of the cells in the water column alone. Identification of coliform bacteria showed that species diversity increased as water flowed through the study area. All materials in the distribution system had high densities of heterotrophic plate count bacteria, while high levels of coliforms were detected only in iron tubercles. Coliform bacteria with the same biochemical profile were found both in distribution system biofilms and in the water column. Assimilable organic carbon determinations showed that carbon levels declined as water flowed through the study area. Maintenance of a 1.0-mg/liter free chlorine residual was insufficient to control coliform occurrences. Flushing and pigging the study area was not an effective control for coliform occurrences in that section. Because coliform bacteria growing in distribution system biofilms may mask the presence of indicator organisms resulting from a true breakdown of treatment barriers, the report recommends that efforts continue to find methods to control growth of coliform bacteria in pipeline biofilms.

Bactericidal activities of selected organic N-halamines

The bactericidal efficacies of three organic N,N'-dihalamine disinfectants in the class of compounds termed imidazolidinones were determined for combinations of pH, temperature, and water quality treatments by using Staphylococcus aureus and Shigella boydii as test organisms. The compound 1,3-dibromo-4,4,5,5-tetramethyl-2-imidazolidinone was found to be the most rapidly acting bactericide, especially under halogen-demand-free conditions. The mixed N,N'-dihalamine 1-bromo-3-chloro-4,4,5,5-tetramethyl-2-imidazolidinone was found to be intermediate in terms of rate of disinfection, while the compound 1,3-dichloro-4,4,5,5-tetramethyl-2-imidazolidinone was observed to be the slowest acting bactericide. When overall effectiveness was judged on the basis of stability of the disinfectants along with rates of disinfection, the mixed halamine was considered to exhibit great potential for use as a disinfectant in an aqueous solution.

Survival and virulence of copper- and chlorine-stressed Yersinia enterocolitica in experimentally infected mice

The effect of gastric pH on the viability and virulence of Yersinia enterocolitica O:8 after exposure to sublethal concentrations of copper and chlorine was determined in mice. Viability and injury were assessed with a nonselective TLY agar (tryptic soy broth containing lactose, yeast extract, and agar) and two selective media, TLYD agar (TLY agar plus sodium deoxycholate) and CIN agar (cefsulodin-Irgasan-novobiocin agar). Both copper and chlorine caused injury which was manifested by the inability of the cells to grow on selective media. CIN agar was more restrictive to the growth of injured cells than TLYD agar. Injury of the exposed cells was further enhanced in the gastric environment of mice. Besides injury, the low gastric pH caused extensive loss of viability in copper-exposed cells. Lethality in the chlorine-exposed cells was less extensive, and a portion of the inoculum (5.2 X 10(5) of 1 X 10(7) inoculated cells) reached the small intestine 5 min postinoculation. No adverse effect on the injured cells was apparent in the small intestine, and a substantial revival (approximately 70%) of the injury occurred in 3 to 4 h after intraluminal inoculation. The virulence of chlorine-stressed Y. enterocolitica in orally inoculated mice was similar to that of the control culture, but copper-stressed cells showed reduced virulence. Virulence was partly restored by oral administration of sodium bicarbonate before the inoculation of copper-exposed cells. Neutralization of gastric acidity had no effect on the virulence of the control or chlorine-stressed cells. The results of this study indicate that the extensive injury caused by the low gastric pH does not affect the virulence potential of chlorine-exposed cells. However, extensive cell death in the mouse stomach is responsible for the reduced virulence of the copper-stressed bacteria.

Comparison of media for recovery of total coliform bacteria from chemically treated water

Five broth media and two solid media were compared for their ability to quantitatively recover total coliform bacteria from chemically treated water. M-Endo LES and mT7 media were used in the membrane filter technique. Lauryl tryptose broth, lactose broth, presence-absence broth, lactose broth with twice the amount of lactose, and lauryl tryptose broth with twice the amount of sodium lauryl sulfate were used in the fermentation tube procedure. The differences in recovery were not significant for the five broth media and M-Endo LES agar. The M-Endo LES and mT7 media were not significantly different; however, the five broth media did yield significantly higher counts than mT7.

Improved membrane filtration media for enumeration of total coliforms and Escherichia coli from sewage and surface waters

Two media were developed that allowed both a total coliform count and an Escherichia coli count to be determined on the same medium after 24 h of incubation at 35 degrees C. The new media were tested along with two standard media on 10 surface water and 7 sewage samples. The experimental media yielded equivalent or higher counts relative to the standard media and recovered more specifically the desired indicator groups as determined by colony identification.

Sensitivity of genetically engineered organisms to selective media

Eighteen strains of Escherichia coli used in genetic studies were tested for their ability to grow on several selective media. Highest recoveries were obtained with m-T7 agar. The SOS system, particularly the recA gene, may play some role in the sensitivity of E. coli to selective agents. These results may be important in the selection of media used to detect genetically engineered organisms released into the environment.

Effect of organotins on fecal pollution indicator organisms

Pure cultures of Escherichia coli and Streptococcus faecalis and environmental water samples were examined for the possibility that pollution involving organotin compounds could decrease the values for indicator organisms when standard methods were applied to the analysis of water samples. (CH3)2SnCl2 and (CH3)3SnCl decreased viable counts at about 10 to 100 mg of Sn liter-1 (8.4 X 10(-5) to 8.4 X 10(-4) mol of Sn liter-1), and tributyltin chloride was effective at about 0.1 to 1.0 mg of Sn liter-1 (8.4 X 10(-7) to 8.4 X 10(-6) mol of Sn liter-1. These concentrations, particularly for the methyltin compounds, are greater than the concentrations reported to date for these compounds in aquatic ecosystems. Thus, organotin compounds alone would not be likely to cause reductions in counts of indicator organisms measured by standard methods. However, it is suggested that, when combined with other environmental stressors or upon long exposure, organotins such as butyltins may contribute to the injury of indicator organisms.

Bacteria associated with granular activated carbon particles in drinking water

A sampling protocol was developed to examine particles released from granular activated carbon filter beds. A gauze filter/Swinnex procedure was used to collect carbon fines from 201 granular activated carbon-treated drinking water samples over 12 months. Application of a homogenization procedure (developed previously) indicated that 41.4% of the water samples had heterotrophic plate count bacteria attached to carbon particles. With the enumeration procedures described, heterotrophic plate count bacteria were recovered at an average rate of 8.6 times higher than by conventional analyses. Over 17% of the samples contained carbon particles colonized with coliform bacteria as enumerated with modified most-probable-number and membrane filter techniques. In some instances coliform recoveries were 122 to 1,194 times higher than by standard procedures. Nearly 28% of the coliforms attached to these particles in drinking water exhibited the fecal biotype. Scanning electron micrographs of carbon fines from treated drinking water showed microcolonies of bacteria on particle surfaces. These data indicate that bacteria attached to carbon fines may be an important mechanism by which microorganisms penetrate treatment barriers and enter potable water supplies.

Comparison of membrane filter, multiple-fermentation-tube, and presence-absence techniques for detecting total coliforms in small community water systems

Methods for detecting total coliform bacteria in drinking water were compared using 1,483 different drinking water samples from 15 small community water systems in Vermont and New Hampshire. The methods included the membrane filter (MF) technique, a 10-tube fermentation tube (FT) technique, and the presence-absence (P-A) test. Each technique was evaluated using a 100-ml drinking water sample. Of the 1,483 samples tested, 336 (23%) contained coliforms as indicated by either one, two, or all three techniques. The FT detected 82%, the P-A detected 88%, and the MF detected 64% of these positives. All techniques simultaneously detected 55% of the positives. Evaluation of the confirmation efficiency of the P-A technique showed 94% of the presumptive positives confirming as coliforms. Thirteen different species of coliforms were identified from the 37 tests in which the P-A was positive but the MF and FT were negative. The P-A test was simple to inoculate and interpret and was considerably more sensitive than the MF and slightly more sensitive than the FT in detecting coliforms in this type of drinking water supply.

Studies on microbial quality of filtered water in households of a university community in Nigeria

Water samples from home filters in nine residential areas of a Nigerian university community were studied. The membrane filter technique was used to determine the total coliform and faecal coliform counts/100 ml of water. Most of the 100 samples studied were grossly contaminated with total coliform counts/100 ml ranging from 0-442, faecal coliform counts/100 ml, 0-216 and the total aerobic plate count per millilitre ranged from 3.0 X 10(3) to 1.9 X 10(9) c.f.u. The source (dams) of water, fitness of filter candles, frequency of cleaning candles and pH of water did not significantly (P greater than 0.05; chi2) affect the microbial quality of either filtered boiled or unboiled tap water. Escherichia coli type I was isolated from 17.9% of the faecal coliforms tested but from only 2.3% of total coliforms. Enterobacter aerogenes was most predominant (38.5%) amongst faecal coliforms isolated while Enterobacter cloacae was the most frequent (37.2%) of the total coliform isolates. The gross contamination of filtered water from all households sampled calls for an enlightenment of residents on the proper use of home water filters.