Simultaneous enhancement of thermostability and catalytic activity of phospholipase A(1) by evolutionary molecular engineering

An effective computational-screening strategy for simultaneously improving both catalytic activity and thermostability of α-l-rhamnosidase

Catalytic efficiency and thermostability are the two most important characteristics of enzymes. However, it is always tough to improve both catalytic efficiency and thermostability of enzymes simultaneously. In the present study, a computational strategy with double-screening steps was proposed to simultaneously improve both catalysis efficiency and thermostability of enzymes; and a fungal α-l-rhamnosidase was used to validate the strategy. As the result, by molecular docking and sequence alignment analysis within the binding pocket, seven mutant candidates were predicted with better catalytic efficiency. By energy variety analysis, A355N, S356Y, and D525N among the seven mutant candidates were predicted with better thermostability. The expression and characterization results showed the mutant D525N had significant improvements in both enzyme activity and thermostability. Molecular dynamics simulations indicated that the mutations located within the 5 Å range of the catalytic domain, which could improve root mean squared deviation, electrostatic, Van der Waal interaction, and polar salvation values, and formed water bridge between the substrate and the enzyme. The study indicated that the computational strategy based on the binding energy, conservation degree and mutation energy analyses was effective to develop enzymes with better catalysis and thermostability, providing practical approach for developing industrial enzymes.

High-Level Production of Bacteriotoxic Phospholipase A1 in Bacterial Host Pseudomonas fluorescens Via ABC Transporter-Mediated Secretion and Inducible Expression

Bacterial phospholipase A1 (PLA1) is used in various industrial fields because it can catalyze the hydrolysis, esterification, and transesterification of phospholipids to their functional derivatives. It also has a role in the degumming process of crude plant oils. However, bacterial expression of the foreign PLA1-encoding gene was generally hampered because intracellularly expressed PLA1 is inherently toxic and damages the phospholipid membrane. In this study, we report that secretion-based production of recombinant PlaA, a bacterial PLA1 gene, or co-expression of PlaS, an accessory gene, minimizes this harmful effect. We were able to achieve high-level PlaA production via secretion-based protein production. Here, TliD/TliE/TliF, an ABC transporter complex of Pseudomonas fluorescens SIK-W1, was used to secrete recombinant proteins to the extracellular medium. In order to control the protein expression with induction, a new strain of P. fluorescens, which had the lac operon repressor gene lacI, was constructed and named ZYAI strain. The bacteriotoxic PlaA protein was successfully produced in a bacterial host, with help from ABC transporter-mediated secretion, induction-controlled protein expression, and fermentation. The final protein product is capable of degumming oil efficiently, signifying its application potential.

Simultaneous Enhancement of Thermostability and Catalytic Activity of a Metagenome-Derived β-Glucosidase Using Directed Evolution for the Biosynthesis of Butyl Glucoside

Butyl glucoside synthesis using bioenzymatic methods at high temperatures has gained increasing interest. Protein engineering using directed evolution of a metagenome-derived β-glucosidase of Bgl1D was performed to identify enzymes with improved activity and thermostability. An interesting mutant Bgl1D187 protein containing five amino acid substitutions (S28T, Y37H, D44E, R91G, and L115N), showed catalytic efficiency (k_cat/K_m of 561.72 mM⁻¹ s⁻¹) toward ρ-nitrophenyl-β-d-glucopyranoside (ρNPG) that increased by 23-fold, half-life of inactivation by 10-fold, and further retained transglycosidation activity at 50 °C as compared with the wild-type Bgl1D protein. Site-directed mutagenesis also revealed that Asp44 residue was essential to β-glucosidase activity of Bgl1D. This study improved our understanding of the key amino acids of the novel β-glucosidases and presented a raw material with enhanced catalytic activity and thermostability for the synthesis of butyl glucosides.

Engineering lipases for temperature adaptation: Structure function correlation

Bacillus lipases are industrially attractive enzymes due to their broad substrate specificity and optimum alkaline pH. However, narrow temperature range of action and low thermostability restrain their optimal use and thus, necessitate attention. Several laboratories are engaged in protein engineering of Bacillus lipases to generate variants with improved attributes for decades using techniques such as directed evolution or rational design. This review summarizes the effect of mutations on the conformational changes through in silico modeling and their manifestation with respect to various biochemical parameters. Various studies have been put together to develop a perspective on the molecular basis of biocatalysis of lipases holding industrial importance.

Orthogonal Regulatory Circuits for Escherichia coli Based on the γ-Butyrolactone System of Streptomyces coelicolor

Chemically inducible transcription factors are widely used to control gene expression of synthetic devices. The bacterial quorum sensing system is a popular tool to achieve such control. However, different quorum sensing systems have been found to cross-talk, both between themselves and with the hosts of these devices, and they are leaky by nature. Here we evaluate the potential use of the γ-butyrolactone system from Streptomyces coelicolor A3(2) M145 as a complementary regulatory circuit. First, two additional genes responsible for the biosynthesis of γ-butyrolactones were identified in S. coelicolor M145 and then expressed in E. coli BL21 under various experimental conditions. Second, the γ-butyrolactone receptor ScbR was optimized for expression in E. coli BL21. Finally, signal and promoter crosstalk between the γ-butyrolactone system from S. coelicolor and quorum sensing systems from Vibrio fischeri and Pseudomonas aeruginosa was evaluated. The results show that the γ-butyrolactone system does not crosstalk with the quorum sensing systems and can be used to generate orthogonal synthetic circuits.

Enhancing the Thermostability of Rhizomucor miehei Lipase with a Limited Screening Library by Rational-Design Point Mutations and Disulfide Bonds

Rhizomucor miehei lipase (RML), as a kind of eukaryotic protein catalyst, plays an important role in the food, organic chemical, and biofuel industries. However, RML retains its catalytic activity below 50°C, which limits its industrial applications at higher temperatures. Soluble expression of this eukaryotic protein in Escherichia coli not only helps to screen for thermostable mutants quickly but also provides the opportunity to develop rapid and effective ways to enhance the thermal stability of eukaryotic proteins. Therefore, in this study, RML was engineered using multiple computational design methods, followed by filtration via conservation analysis and functional region assessment. We successfully obtained a limited screening library (only 36 candidates) to validate thermostable single point mutants, among which 24 of the candidates showed higher thermostability and 13 point mutations resulted in an apparent melting temperature ([Formula: see text]) of at least 1°C higher. Furthermore, both of the two disulfide bonds predicted from four rational-design algorithms were further introduced and found to stabilize RML. The most stable mutant, with T18K/T22I/E230I/S56C-N63C/V189C-D238C mutations, exhibited a 14.3°C-higher [Formula: see text] and a 12.5-fold increase in half-life at 70°C. The catalytic efficiency of the engineered lipase was 39% higher than that of the wild type. The results demonstrate that rationally designed point mutations and disulfide bonds can effectively reduce the number of screened clones to enhance the thermostability of RML.IMPORTANCER. miehei lipase, whose structure is well established, can be widely applied in diverse chemical processes. Soluble expression of R. miehei lipase in E. coli provides an opportunity to explore efficient methods for enhancing eukaryotic protein thermostability. This study highlights a strategy that combines computational algorithms to predict single point mutations and disulfide bonds in RML without losing catalytic activity. Through this strategy, an RML variant with greatly enhanced thermostability was obtained. This study provides a competitive alternative for wild-type RML in practical applications and further a rapid and effective strategy for thermostability engineering.

Targeted mutagenesis: A sniper-like diversity generator in microbial engineering

Mutations, serving as the raw materials of evolution, have been extensively utilized to increase the chances of engineering molecules or microbes with tailor-made functions. Global and targeted mutagenesis are two main methods of obtaining various mutations, distinguished by the range of action they can cover. While the former one stresses the mining of novel genetic loci within the whole genomic background, targeted mutagenesis performs in a more straightforward manner, bringing evolutionary escape and error catastrophe under control. In this review, we classify the existing techniques of targeted mutagenesis into two categories in terms of whether the diversity is generated in vitro or in vivo, and briefly introduce the mechanisms and applications of them separately. The inherent connections and development trends of the two classes are also discussed to provide an insight into the next generation evolution research.

Cell-free synthesis of functional phospholipase A1 from Serratia sp

BACKGROUND

Phospholipase A1 is an enzyme that hydrolyzes phospholipids at the sn-1 position. It has potential applications across diverse fields including food, pharmaceutical, and biofuel industries. Although there has been increasing interest in the use of phospholipase A1 for degumming of plant oils during biodiesel production, production of recombinant phospholipase A1 has been hampered by low efficiency of gene expression and its toxicity to the host cell.

RESULTS

While expression of phospholipase A1 in Escherichia coli resulted in extremely low productivity associated with inhibition of transformed cell growth, drastically higher production of functional phospholipase A1 was achieved in a cell-free protein synthesis system where enzyme expression is decoupled from cell physiology. Compared with expression in E. coli, cell-free synthesis resulted in an over 1000-fold higher titer of functional phospholipase A1. Cell-free produced phospholipase A1 was also used for successfully degumming crude plant oil.

CONCLUSIONS

We demonstrate successful production of Serratia sp. phospholipase A1 in a cell-free protein synthesis system. Including the phospholipase A1 investigated in this study, many industrial enzymes can interfere with the regular physiology of cells, making cellular production of them problematic. With the experimental results presented herewith, we believe that cell-free protein synthesis will provide a viable option for rapid production of important industrial biocatalysts.

Recombinant Lipases and Phospholipases and Their Use as Biocatalysts for Industrial Applications

Lipases and phospholipases are interfacial enzymes that hydrolyze hydrophobic ester linkages of triacylglycerols and phospholipids, respectively. In addition to their role as esterases, these enzymes catalyze a plethora of other reactions; indeed, lipases also catalyze esterification, transesterification and interesterification reactions, and phospholipases also show acyltransferase, transacylase and transphosphatidylation activities. Thus, lipases and phospholipases represent versatile biocatalysts that are widely used in various industrial applications, such as for biodiesels, food, nutraceuticals, oil degumming and detergents; minor applications also include bioremediation, agriculture, cosmetics, leather and paper industries. These enzymes are ubiquitous in most living organisms, across animals, plants, yeasts, fungi and bacteria. For their greater availability and their ease of production, microbial lipases and phospholipases are preferred to those derived from animals and plants. Nevertheless, traditional purification strategies from microbe cultures have a number of disadvantages, which include non-reproducibility and low yields. Moreover, native microbial enzymes are not always suitable for biocatalytic processes. The development of molecular techniques for the production of recombinant heterologous proteins in a host system has overcome these constraints, as this allows high-level protein expression and production of new redesigned enzymes with improved catalytic properties. These can meet the requirements of specific industrial process better than the native enzymes. The purpose of this review is to give an overview of the structural and functional features of lipases and phospholipases, to describe the recent advances in optimization of the production of recombinant lipases and phospholipases, and to summarize the information available relating to their major applications in industrial processes.

Simultaneous retention of thermostability and specific activity in chimeric human alkaline phosphatases

Alkaline phosphatases (APs) are a family of dimeric metalloenzymes that has been utilized in many areas due to its ability to hydrolyze a variety of phosphomonoesters. While mammalian APs have higher specific activity than prokaryotic APs, they are generally less thermostable. To cultivate the possibility to confer mammalian APs with higher thermostability as well as high activity, we focused on human AP isozymes. Among the four isozymes of human APs, placental AP (PLAP) retains the highest thermostability, while intestinal AP (IAP) has the highest specific activity. Since the two APs display high homology, a series of chimeric enzymes were made in a secreted form to analyze their properties. Surprisingly, chimeric APs with IAP residues at the N-terminal and PLAP residues at the C-terminal regions showed higher specific activity than PLAP, while keeping thermostability as high as PLAP. Especially, one showed similar specific activity to IAP, while showing slower inactivation than PLAP after incubation at 75°C. Interestingly, the mutant also showed higher resistance to uncompetitive inhibitors Phe and Leu than their parent enzymes, possibly due to increased hydrophilicity of the active site entrance residues. The obtained chimera will be useful as a novel reporter in various assays including gene hybridization.

Cellulosome-based, Clostridium-derived multi-functional enzyme complexes for advanced biotechnology tool development: advances and applications

The cellulosome is one of nature's most elegant and elaborate nanomachines and a key biological and biotechnological macromolecule that can be used as a multi-functional protein complex tool. Each protein module in the cellulosome system is potentially useful in an advanced biotechnology application. The high-affinity interactions between the cohesin and dockerin domains can be used in protein-based biosensors to improve both sensitivity and selectivity. The scaffolding protein includes a carbohydrate-binding module (CBM) that attaches strongly to cellulose substrates and facilitates the purification of proteins fused with the dockerin module through a one-step CBM purification method. Although the surface layer homology (SLH) domain of CbpA is not present in other strains, replacement of the cell surface anchoring domain allows a foreign protein to be displayed on the surface of other strains. The development of a hydrolysis enzyme complex is a useful strategy for consolidated bioprocessing (CBP), enabling microorganisms with biomass hydrolysis activity. Thus, the development of various configurations of multi-functional protein complexes for use as tools in whole-cell biocatalyst systems has drawn considerable attention as an attractive strategy for bioprocess applications. This review provides a detailed summary of the current achievements in Clostridium-derived multi-functional complex development and the impact of these complexes in various areas of biotechnology.

Tailoring the pH dependence of human non-pancreatic secretory phospholipase A2 by engineering surface charges

Human non-pancreatic secretory phospholipase A2 (hnpsPLA2) catalyzes the sn-2 acyl hydrolysis of phospholipids. It was reported that hnpsPLA2 is involved in various diseases like inflammation, cancer, and so on. This enzyme also exhibits anti-bacterial and anti-virus activities. It is active over a broad pH range, with higher activity at alkaline conditions. In order to make it suitable as a potential bactericide, high activity at neutral pH is preferable. We have tried to tailor the pH dependence of hnpsPLA2 activity by replacing its surface charged residues. Three surface charge replacements, Arg42Glu, Arg100Glu, and Glu89Lys, showed increased activities at neutral pH, which are 2.3, 2.8, and 2.3 times that of the wild-type enzyme at pH 7. Both the positive-to-negative and negative-to-positive mutations lowered the optimum enzymatic reaction pH of hnpsPLA2, indicating that the enzyme pH profile depends on a delicate balance of charged residues. The activity changes are in good agreement with the recently proposed calcium-coordinated catalytic triad mechanism. This study also provides a general means of enhancing hnpsPLA2 activity at low pH.

Purification and structural characterisation of phospholipase A1 (Vespapase, Ves a 1) from Thai banded tiger wasp (Vespa affinis) venom

The Thai banded tiger wasp (Vespa affinis) is one of the most dangerous vespid species in Southeast Asia, and stinging accidents involving this species still cause fatalities. In the present study, four forms of V. affinis phospholipase A(1) were identified through a proteomics approach. Two of these enzymes were purified by reverse-phase chromatography, and their biochemical properties were characterised. These enzymes, designated Ves a 1s, are not glycoproteins and exist as 33441.5 and 33474.4 Da proteins, which corresponded with the 34-kDa band observed via SDS-PAGE. The thermal stabilities of these enzymes were stronger than snake venom. Using an in vivo assay, no difference was found in the toxicities of the different isoforms. Furthermore, the toxicity of these enzymes does not appear to be correlated with their PLA(1) activity. The cDNAs of the full-length version of Ves a 1s revealed that the Ves a 1 gene consists of a 1005-bp ORF, which encodes 334 amino acid residues, and 67- and 227-bp 5' and 3' UTRs, respectively. The two isoforms are different by three nucleotide substitutions, resulting in the replacement of two amino acids. Through sequence alignment, these enzymes were classified as members of the pancreatic lipase family. The structural modelling of Ves a 1 used the rat pancreatic lipase-related protein 2 (1bu8A) as a template because it has PLA(1) activity, which demonstrated that this enzyme belongs to the α/β hydrolase fold family. The Ves a 1 structure, which is composed of seven α-helixes and eleven β-strands, contains the β-strand/ɛSer/α-helix structural motif, which contains the Gly-X-Ser-X-Gly consensus sequence. The typical surface structures that play important roles in substrate selectivity (the lid domain and the β9 loop) were shortened in the Ves a 1 structure, which suggests that this enzyme may only exhibit phospholipase activity. Moreover, the observed insertion of proline into the lid domain of the Ves a 1 structure is rare. We therefore propose that this proline residue might be involved in the stability and activity of Ves a 1s.

Purification, characterization, molecular cloning and extracellular production of a phospholipase A1 from Streptomyces albidoflavus NA297

A novel metal ion-independent phospholipase A₁ of Streptomyces albidoflavus isolated from Japanese soil has been purified and characterized. The enzyme consists of a 33-residue N-terminal signal secretion sequence and a 269-residue mature protein with a deduced molecular weight of 27,199. Efficient and extracellular production of the recombinant enzyme was successfully achieved using Streptomyces lividans cells and an expression vector. A large amount (25 mg protein, 14.7 kU) of recombinant enzyme with high specific activity (588 U/mg protein) was purified by simple purification steps. The maximum activity was found at pH 7.2 and 50 °C. At pH 7.2, the enzyme preferably hydrolyzed phosphatidic acid and phosphatidylserine; however, the substrate specificity was dependent on the reaction pH. The enzyme hydrolyzed lysophosphatidylcholine and not triglyceride and the p-nitrophenyl ester of fatty acids. At the reaction equilibrium, the molar ratio of released free fatty acids (sn-1:sn-2) was 63:37. The hydrolysis of phosphatidic acid at 50 °C and pH 7.2 gave apparent V_max and k_cat values of 1389 μmol min⁻¹ mg protein⁻¹ and 630 s⁻¹, respectively. The apparent K_m and k_cat/K_m values were 2.38 mM and 265 mM⁻¹ s⁻¹, respectively. Mutagenesis analysis showed that Ser11 is essential for the catalytic function of the enzyme and the active site may include residues Ser216 and His218.

Recent progress on phospholipases: different sources, assay methods, industrial potential and pathogenicity

Significant studies on phospholipases optimization, characterization, physiological role and industrial potential have been conducted worldwide. Some of them have been directed for biotechnological advances such as gene discovery and functional enhancement by protein engineering. Others reported phospholipases as virulence factor and major cause of pathophysiological effects. A general overview on phospholipase is needed for the identification of new reliable and efficient phospholipase, which would be potentially used in number of industrial and medical applications. Phospholipases catalyse the hydrolysis of one or more ester and phosphodiester bonds of glycerophospholipids. They vary in site of action on phospholipid which can be used industrially for modification/production of new phospholipids. Catalytically active phospholipase mainly use phosphatidylcholine as major substrate, but they can also show specificity with other phospholipids. Several accurate phospholipase assay methods are known, but a rapid and reliable method for high-throughput screening is still a challenge for efficient supply of superior phospholipases and their practical applications. Major application of phospholipase is in industries like oil refinery, health food manufacturing, dairy, cosmetics etc. All types of phospholipases can be involved as virulence factor. They can also be used as diagnostic markers for microbial infection. The importance of phospholipase in virulence is proven and inhibitors of the enzyme can be used as candidate for preventing the associated disease.

Production of minicellulosomes for the enhanced hydrolysis of cellulosic substrates by recombinant Corynebacterium glutamicum

Although cellulosic materials of plant origin are the most abundant utilizable biomass resource, the amino acid-producing organism Corynebacterium glutamicum can not utilize these materials. Here we report the engineering of a C. glutamicum strain expressing functional minicellulosomes containing chimeric endoglucanase E bound to miniCbpA from Clostridium cellulovorans that can hydrolyze cellulosic materials. The chimeric endoglucanase E consists of the endoglucanase E catalytic backbone of Clostridium thermocellum fused with the endoglucanase B dockerin domain of C. cellulovorans. The resulting strain degraded cellulose efficiently by substrate targeting via the carbohydrate binding module. The assembly of minicellulosomes increased the activity against carboxymethyl cellulose approximately 2.8-fold compared with that for the corresponding enzymes alone. This is the first report of the formation of Clostridium minicellulosomes by C. glutamicum. The development of C. glutamicum strain that is capable of more effective cellulose hydrolysis brings about a realization of consolidated bioprocessing for the utilization of cellulosic biomass.

Biotechnological approaches to develop bacterial chitinases as a bioshield against fungal diseases of plants

Fungal diseases of plants continue to contribute to heavy crop losses in spite of the best control efforts of plant pathologists. Breeding for disease-resistant varieties and the application of synthetic chemical fungicides are the most widely accepted approaches in plant disease management. An alternative approach to avoid the undesired effects of chemical control could be biological control using antifungal bacteria that exhibit a direct action against fungal pathogens. Several biocontrol agents, with specific fungal targets, have been registered and released in the commercial market with different fungal pathogens as targets. However, these have not yet achieved their full commercial potential due to the inherent limitations in the use of living organisms, such as relatively short shelf life of the products and inconsistent performance in the field. Different mechanisms of action have been identified in microbial biocontrol of fungal plant diseases including competition for space or nutrients, production of antifungal metabolites, and secretion of hydrolytic enzymes such as chitinases and glucanases. This review focuses on the bacterial chitinases that hydrolyze the chitinous fungal cell wall, which is the most important targeted structural component of fungal pathogens. The application of the hydrolytic enzyme preparations, devoid of live bacteria, could be more efficacious in fungal control strategies. This approach, however, is still in its infancy, due to prohibitive production costs. Here, we critically examine available sources of bacterial chitinases and the approaches to improve enzymatic properties using biotechnological tools. We project that the combination of microbial and recombinant DNA technologies will yield more effective environment-friendly products of bacterial chitinases to control fungal diseases of crops.

Enhanced activity and stability in the presence of organic solvents by increased active site polarity and stabilization of a surface loop in a metalloprotease

Salinivibrio zinc-metalloprotease (SVP) is an enzyme which was isolated from Salinivibrio proteolyticus, a moderately halophilic species from a hypersaline lake in Iran. A195E and G203D mutants were constructed to increase polarity near the active site in order to preserve the hydration layer against organic solvents [dimethylformamide (DMF), methanol, isopropanol and n-propanol]. A268P was constructed to stabilize a surface loop far from the active site and A195E/A268P was constructed to investigate the combined effects of these two mutations. Results showed that relative C(50) values of A195E increased to approximately 26 and 11% in DMF and methanol whereas an increase of approximately 32 and 41% was observed in the presence of isopropanol and n-propanol. The irreversible thermoinactivation rate (k(i)) for A195E was estimated to be 60 and 130 (x10(-3) min(-1)) in the presence of DMF and n-propanol, respectively, while k(i) for SVP was 90 and 190 (x10(-3) min(-1)). G203D exhibited similar k(i) as A195E in the presence of methanol and isopropanol, but the calculated k(i) in the presence of DMF and n-propanol was 70 and 160 (x10(-3) min(-1)), respectively. A268P and A268P/A195E variants marginally increased the thermoresistance of the enzyme in this condition.

Improvement of Bacillus circulans beta-amylase activity attained using the ancestral mutation method

Thermostabilization of enzymes is one of the greatest challenges of protein engineering. The ancestral mutation method, which introduces ancestral residues into a target enzyme, has previously been developed and used to improve the thermostabilities of thermophilic enzymes. Herein, we report a study that used the ancestral mutation method to improve the thermostability of Bacillus circulans beta-amylase, a mesophilic enzyme. A bacterial, common-ancestral beta-amylase sequence was inferred using a phylogenetic tree composed of higher plant and bacterial amylase sequences. Eighteen mutants containing ancestral residues were designed, expressed in Escherichia coli and purified. Several of these mutants were more thermostable than that of the wild-type amylase. Notably, one mutant had both greater activity and greater thermostability. The relationship between the extent to which the amino acid residues within 5 A of the mutation site were evolutionarily conserved and the extent to which thermostability was improved was examined. Apparently, it is necessary to conserve the residues surrounding an ancestral residue if thermostability is to be improved by the ancestral mutation method.

Enhancement of the thermostability and activity of mesophilic Clostridium cellulovorans EngD by in vitro DNA recombination with Clostridium thermocellum CelE

The thermal stability and catalytic activity of endoglucanase (EngD) from mesophilic Clostridium cellulovorans were improved by evolutionary molecular engineering. Thermostable mutants were isolated after staggered extension process (StEP) with celE from thermophilic Clostridium thermocellum performed to conduct family shuffling and overlay screening of the resultant mutant library. The relative activity of the best-evolved clone has been improved of about 2 times higher at 50 degrees C and showed a higher k(cat)/K(m) value than its engD parental clone. We determined that these variants had two amino acid substitutions (L157N, Q158E) and confirmed their effects by substituting these amino acids in the parental gene by site-directed mutagenesis. These substitutions resulted in an increase in hydrophilic or charged residues. Our results demonstrate that in vitro recombination is an effective approach to improve the thermostability and enzymatic activity of a mesophilic enzyme.

Improved catalytic efficiency of endo-beta-1,4-glucanase from Bacillus subtilis BME-15 by directed evolution

Bacillus subtilis endo-beta-1,4-glucanase (Cel5A) hydrolyzes cellulose by cleavage of the internal bonds in the glucose chains, producing new ends randomly. Using directed evolution techniques of error-prone polymerase chain reaction (PCR) and DNA shuffling, several Cel5A variants with improved catalytic activity had been screened from the mutant library, which contained 71,000 colonies. Compared with the wild-type enzyme, the variants (M44-11, S75 and S78) showed 2.03 to 2.68-fold increased activities toward sodium carboxymethyl cellulose (CMC), while the M44-11 also exhibited a wider pH tolerance and higher thermostability. Structural models of M44-11, S75, S78, and WT proteins revealed that most of the substitutions were not located in the strictly conserved regions, except the mutation V255A of S75, which was closed to the nucleophile Glu257 in the catalytic center of the enzyme. Moreover, V74A and D272G of M44-11, which were not located in the substrate binding sites and the catalytic center, might result in improved stability and catalytic activity. These results provided useful references for directed evolution of the enzymes that belonged to the glycoside hydrolase family 5 (GH5).

Directed evolution of Tk-subtilisin from a hyperthermophilic archaeon: identification of a single amino acid substitution responsible for low-temperature adaptation

Tk-subtilisin from the hyperthermophilic archaeon Thermococcus kodakaraensis is synthesized in a prepro-form (prepro-Tk-subtilisin), secreted in a pro-form (pro-Tk-subtilisin), and matured to an active form (mat-Tk-subtilisin*; a Ca(2+)-bound active form of matured domain of Tk-subtilisin) upon autoprocessing and degradation of the propeptide [Tk-propeptide; propeptide of Tk-subtilisin (Gly1-Leu69)]. Pro-Tk-subtilisin exhibited halo-forming activity only at 80 degrees C, but not at 70 and 60 degrees C, because Tk-propeptide is not effectively degraded by mat-Tk-subtilisin* and forms an inactive complex with mat-Tk-subtilisin* at <80 degrees C. Random mutagenesis in the entire prepro-Tk-subtilisin gene, followed by screening for mutant proteins with halo-forming activity at 70 and 60 degrees C, allowed us to identify single Gly56 --> Ser mutation in the propeptide region responsible for low-temperature adaptation of pro-Tk-subtilisin. SDS-PAGE analyses and mat-Tk-subtilisin* activity assay of pro-G56S-subtilisin indicated more rapid maturation than pro-Tk-subtilisin. The resultant active form was indistinguishable from mat-Tk-subtilisin* in activity and stability, indicating that Gly56 --> Ser mutation does not seriously affect the folding of the mature domain. However, this mutation greatly destabilized the propeptide, making it unstructured in an isolated form. As a result, Tk-propeptide with Gly56 --> Ser mutation (G56S-propeptide) was more susceptible to proteolytic degradation and less effectively inhibited mat-Tk-subtilisin* activity than Tk-propeptide. These results suggest that pro-G56S-subtilisin is more effectively matured than pro-Tk-subtilisin at lower temperatures, because autoprocessed G56S-propeptide is unstructured upon dissociation from mat-Tk-subtilisin* and is therefore effectively degraded by mat-Tk-subtilisin*.

Molecular basis for thermal properties of Streptomyces thermovulgaris fumarase C hinge at hydrophilic amino acids R163, E170 and S347

Industrially, the use of high temperatures (40-60 degrees C) in the L: -malate production process could result in rapid inactivation of the mesophilic fumarases, warranting constant replenishment of the biocatalyst. Thus, a thermostable fumarase C that is active and stable at high temperatures would be ideal. Biochemical studies using recombinant fumarase C from thermophilic Streptomyces thermovulgaris (stFUMC) indicated that it was optimally active at 50 degrees C and highly stable even after 24 h of incubation at 40 degrees C. The same gene from mesophilic Streptomyces coelicolor (scfumC) was also cloned and expressed as soluble proteins for comparison in thermal properties of both enzymes. In contrast to stFUMC, scFUMC exhibited a lower temperature optima of 30 degrees C and was rapidly denatured at 50 degrees C. The specific activity of stFUMC was also higher than that of scFUMC by 20-fold. After primary sequence comparison, three hydrophilic amino acid residues, R163, E170 and S347, were forged into the thermolabile scFUMC either singly or in combination for the investigation of their contributions in the thermal properties of the mutant enzymes. Of the mutants studied, the A347S scFUMC mutant resulted in the highest increase in optimum temperature of 10 degrees C and a fourfold enhancement in specific activity. G163R/G170E and G163R/G170E/A347S scFUMC mutants are more thermostable than wild-type scFUMC. These findings support stFUMC as a highly efficient, thermostable fumarase C with industrial potential and suggest that R163, E170 and S347 are involved in the enhancement of thermal properties in fumarase C.

Phospholipase A in Gram-negative bacteria and its role in pathogenesis

Phospholipase A (PLA) is one of the few enzymes present in the outer membrane of Gram-negative bacteria, and is likely to be involved in the membrane disruption processes that occur during host cell invasion. Both secreted and membrane-bound phospholipase A(2) activities have been described in bacteria, fungi and protozoa. Recently there have been increasing reports on the involvement of PLA in bacterial invasion and pathogenesis. This review highlights the latest findings on PLA as a virulence factor in Gram-negative bacteria.

Enhancing thermostability of maltogenic amylase from Bacillus thermoalkalophilus ET2 by DNA shuffling

DNA shuffling was used to improve the thermostability of maltogenic amylase from Bacillus thermoalkalophilus ET2. Two highly thermostable mutants, III-1 and III-2, were generated after three rounds of shuffling and recombination of mutations. Their optimal reaction temperatures were all 80 degrees C, which was 10 degrees C higher than that of the wild-type. The mutant enzyme III-1 carried seven mutations: N147D, F195L, N263S, D311G, A344V, F397S, and N508D. The half-life of III-1 was about 20 times greater than that of the wild-type at 78 degrees C. The mutant enzyme III-2 carried M375T in addition to the mutations in III-1, which was responsible for the decrease in specific activity. The half-life of III-2 was 568 min while that of the wild-type was < 1 min at 80 degrees C. The melting temperatures of III-1 and III-2, as determined by differential scanning calorimetry, increased by 6.1 degrees C and 11.4 degrees C, respectively. Hydrogen bonding, hydrophobic interaction, electrostatic interaction, proper packing, and deamidation were predicted as the mechanisms for the enhancement of thermostability in the enzymes with the mutations.

Enhanced reactivity of Rhizopus oryzae lipase displayed on yeast cell surfaces in organic solvents: potential as a whole-cell biocatalyst in organic solvents

Immobilization of enzymes on some solid supports has been used to stabilize enzymes in organic solvents. In this study, we evaluated applications of genetically immobilized Rhizopus oryzae lipase displayed on the cell surface of Saccharomyces cerevisiae in organic solvents and measured the catalytic activity of the displayed enzyme as a fusion protein with alpha-agglutinin. Compared to the activity of a commercial preparation of this lipase, the activity of the new preparation was 4.4 x 10(4)-fold higher in a hydrolysis reaction using p-nitrophenyl palmitate and 3.8 x 10(4)-fold higher in an esterification reaction with palmitic acid and n-pentanol (0.2% H2O). Increased enzyme activity may occur because the lipase displayed on the yeast cell surface is stabilized by the cell wall. We used a combination of error-prone PCR and cell surface display to increase lipase activity. Of 7,000 colonies in a library of mutated lipases, 13 formed a clear halo on plates containing 0.2% methyl palmitate. In organic solvents, the catalytic activity of 5/13 mutants was three- to sixfold higher than that of the original construct. Thus, yeast cells displaying the lipase can be used in organic solvents, and the lipase activity may be increased by a combination of protein engineering and display techniques. Thus, this immobilized lipase, which is more easily prepared and has higher activity than commercially available free and immobilized lipases, may be a practical alternative for the production of esters derived from fatty acids.

The FAXWXXT motif in the carboxyl terminus ofVibrio mimicusmetalloprotease is involved in binding to collagen

We have shown previously that the C-terminal region of the extracellular metalloprotease of Vibrio mimicus (VMC) is essential for collagenase activity. Here, we demonstrate that deletion of 100 amino acids, but not 67 amino acids, from the C-terminus of the intact VMC protein (VMC61) abolished the collagenase activity. The intervening 33-amino acid region contains a repeated FAXWXXT motif that is essential for insoluble type I collagen binding; the isolated 33-amino acid peptide bound to insoluble type I collagen, while a peptide containing only the first FAXWXXT motif did not. Compared to the VMC61, the 33-amino acid peptide corresponding to the C-terminus exhibited a similar binding affinity and a lower binding capacity.

A novel lipase/acyltransferase from the yeast Candida albicans: expression and characterisation of the recombinant enzyme

A gene encoding an extracellular lipase (CaLIP4) from Candida albicans was successfully expressed in Saccharomyces cerevisiae after mutagenesis of its unusual CUG serine codon into a universal one. The ability of this lipase, which shares 60% sequence homology with the lipase/acyltransferase from Candida parapsilosis, to synthesise esters was investigated. CaLIP4 behaved as a true lipase, displaying activity towards insoluble triglycerides and having no activity in the presence of short-chain fatty acid (FA) esters and phosphatidylcholine. Methyl, ethyl and propyl esters were efficiently used. The lipase exhibited highest selectivity for unsaturated FA. With saturated FAs, C14-C16 acyl chains were preferred. In a biphasic aqueous/lipid system, CaLIP4 displayed a high alcoholysis activity with a range of alcohols (e.g. methanol, ethanol, propanol and isopropanol) as acyl acceptor. During the course of the alcoholysis reaction, new esters are produced at concentrations above the thermodynamic equilibrium of the esterification reaction, indicating that ester synthesis does not proceed by esterification but mainly by direct acyltransfer. Ester synthesis is under kinetic control due to the high rate of alcoholysis. Unwanted hydrolysis is limited by competition between the acyl acceptor (alcohol) and water for the acyltransfer reaction, favouring the alcohol.

Directed evolution of Thermus maltogenic amylase toward enhanced thermal resistance

The thermostability of maltogenic amylase from Thermus sp. strain IM6501 (ThMA) was improved greatly by random mutagenesis using DNA shuffling. Four rounds of DNA shuffling and subsequent recombination of the mutations produced the highly thermostable mutant enzyme ThMA-DM, which had a total of seven individual mutations. The seven amino acid substitutions in ThMA-DM were identified as R26Q, S169N, I333V, M375T, A398V, Q411L, and P453L. The optimal reaction temperature of the recombinant enzyme was 75 degrees C, which was 15 degrees C higher than that of wild-type ThMA, and the melting temperature, as determined by differential scanning calorimetry, was increased by 10.9 degrees C. The half-life of ThMA-DM was 172 min at 80 degrees C, a temperature at which wild-type ThMA was completely inactivated in less than 1 min. Six mutations that were generated during the evolutionary process did not significantly affect the specific activity of the enzyme, while the M375T mutation decreased activity to 23% of the wild-type level. The molecular interactions of the seven mutant residues that contributed to the increased thermostability of the mutant enzyme with other adjacent residues were examined by comparing the modeled tertiary structure of ThMA-DM with those of wild-type ThMA and related enzymes. The A398V and Q411L substitutions appeared to stabilize the enzyme by enhancing the interdomain hydrophobic interactions. The R26Q and P453L substitutions led potentially to the formation of genuine hydrogen bonds. M375T, which was located near the active site of ThMA, probably caused a conformational or dynamic change that enhanced thermostability but reduced the specific activity of the enzyme.

Significantly enhanced stability of glucose dehydrogenase by directed evolution

An NaCl-independent stability-enhanced mutant of glucose dehydrogenase (GlcDH) was obtained by using in vitro directed evolution. The family shuffling method was applied for in vitro directed evolution to construct a mutant library of GlcDH genes. Three GlcDH-coding genes from Bacillus licheniformis IFO 12200, Bacillus megaterium IFO 15308 and Bacillus subtilis IFO 13719 were each cloned by direct PCR amplification into the p Trc99A expression vector and expressed in the host, Escherichia coli. In addition to these three GlcDH genes, a gene encoding a previously obtained GlcDH mutant, F20 (Q252L), derived from B. megaterium IWG3, was also subjected to directed evolution by the family shuffling method. A highly thermostable mutant, GlcDH DN-46, was isolated in the presence or absence of NaCl after the second round of family shuffling and filter-based screening of the mutant libraries. This mutant had only one novel additional amino acid residue exchange (E170K) compared to F20, even though DN-46 was obtained by family shuffling of four different GlcDH genes. The effect of temperature and pH on the stability of the GlcDH mutants F20 and DN46 was investigated with purified enzymes in the presence or absence of NaCl. In the absence of NaCl, F20 showed very poor thermostability (half-life =1.3 min at 66 degrees C), while the half-life of isolated mutant DN-46 was 540 min at 66 degrees C, i.e., 415-fold more thermostable than mutant F20. The activity of the wild-type and F20 enzymes dropped critically when the pH value was changed to the alkaline range in the absence of NaCl, but no such decrease was apparent with the DN-46 enzyme in the absence of NaCl.

Construction of DNA-shuffled and incrementally truncated libraries by a mutagenic and unidirectional reassembly method: changing from a substrate specificity of phospholipase to that of lipase

A method of mutagenic and unidirectional reassembly (MURA) that can generate libraries of DNA-shuffled and randomly truncated proteins was developed. The method involved fragmenting the template gene(s) randomly by DNase I and reassembling the small fragments with a unidirectional primer by PCR. The MURA products were treated with T4 DNA polymerase and subsequently with a restriction enzyme whose site was located on the region of the MURA primer. The N-terminal-truncated and DNA-shuffled library of a Serratia sp. phospholipase A(1) prepared by this method had an essentially random variation of truncated size and also showed point mutations associated with DNA shuffling. After high-throughput screening on triglyceride-emulsified plates, several mutants exhibiting absolute lipase activity (NPL variants) were obtained. The sequence analysis and the lipase activity assay on the NPL variants revealed that N-terminal truncations at a region beginning with amino acids 61 to 71, together with amino acid substitutions, resulted in the change of substrate specificity from a phospholipase to a lipase. We therefore suggest that the MURA method, which combines incremental truncation with DNA shuffling, can contribute to expanding the searchable sequence space in directed evolution experiments.

Discovery of a stable dimeric mutant of cyanovirin-N (CV-N) from a T7 phage-displayed CV-N mutant library

Mutant proteins with altered properties can be useful probes for investigating structure, ligand binding sites, mechanisms of action, and physicochemical attributes of the corresponding wild-type proteins of interest. In this report, we illuminate properties of mutants of the potent HIV-inactivating protein, cyanovirin-N (CV-N), selected by construction of a mutant library by error-prone polymerase chain reaction and affinity-based screening using T7 phage display technology. After three rounds of biopanning, two phage-displayed, one-point mutants of CV-N, Ser52Pro and Ala77Thr, were isolated. After the elucidation of biological activities of the mutants displayed on phage as well as the Escherichia coli-expressed, purified mutant proteins, we subsequently subjected the mutants to analyses by native PAGE and size-exclusion chromatography. We found that the Ser52Pro mutant not only was active against HIV but also existed exclusively as a dimer in solution. This was in marked contrast to the wild-type CV-N, which exists in solution predominantly as the monomer. The Ser52Pro mutant provides a novel model for further investigations of the folding mechanism as well as structure-activity requirements for CV-N's antiviral properties.

Increasing the thermal stability of an oligomeric protein, beta-glucuronidase

The reporter enzyme beta-glucuronidase was mutagenized and evolved for thermostability. After four cycles of screening the best variant was more active than the wild-type enzyme, and retained function at 70 degrees C, whereas the wild-type enzyme lost function at 65 degrees C. Variants derived from sequential mutagenesis were shuffled together, and re-screened for thermostability. The best variants retained activities at even higher temperatures (80 degrees C), but had specific activities that were now less than that of the wild-type enzyme. The mutations clustered near the tetramer interface of the enzyme, and many of the evolved variants showed much greater resistance to quaternary structure disruption at high temperatures, which is also a characteristic of naturally thermostable enzymes. Together, these results suggest a pathway for the evolution of thermostability in which enzymes initially become stable at high temperatures without loss of activity at low temperatures, while further evolution leads to enzymes that have kinetic parameters that are optimized for high temperatures.

Directed evolution to produce an alkalophilic variant from a Neocallimastix patriciarum xylanase

The catalytic domain of a xylanase from the anaerobic fungus Neocallimastix patriciarum was made more alkalophilic through directed evolution using error-prone PCR. Transformants expressing the alkalophilic variant xylanases produced larger clear zones when overlaid with high pH, xylan-containing agar. Eight amino acid substitutions were identified in six selected mutant xylanases. Whereas the wild-type xylanase exhibited no activity at pH 8.5, the relative and specific activities of the six mutants were higher at pH 8.5 than at pH 6.0. Seven of the eight amino acid substitutions were assembled in one enzyme (xyn-CDBFV) by site-directed mutagenesis. Some or all of the seven mutations exerted positive and possibly synergistic effects on the alkalophilicity of the enzyme. The resulting composite mutant xylanase retained a greater proportion of its activity than did the wild type at pH above 7.0, maintaining 25% of its activity at pH 9.0, and its retention of activity at acid pH was no lower than that of the wild type. The composite xylanase (xyn-CDBFV) had a relatively high specific activity of 10128 micromol glucose x min(-1) x (mg protein)(-1) at pH 6.0. It was more thermostable at 60 degrees C and alkaline tolerant at pH 10.0 than the wild-type xylanase. These properties suggest that the composite mutant xylanase is a promising and suitable candidate for paper pulp bio-bleaching.

Engineering proteins for thermostability: the use of sequence alignments versus rational design and directed evolution

With the advent of directed evolution techniques, protein engineering has received a fresh impetus. Engineering proteins for thermostability is a particularly exciting and challenging field, as it is crucial for broadening the industrial use of recombinant proteins. In addition to directed evolution, a variety of partially successful rational concepts for engineering thermostability have been developed in the past. Recent results suggest that amino acid sequence comparisons of mesophilic proteins alone can be used efficiently to engineer thermostable proteins. The potential benefits of the underlying, semirational 'consensus concept' are compared with those of rational design and directed evolution approaches.

Improving the quality of industrially important enzymes by directed evolution

Directed evolution is a new process for developing industrially viable biocatalysts. This technique does not require a comprehensive knowledge of the relationships between sequence structure and function of proteins as required by protein engineering. It mimics the process of Darwinian evolution in a test tube combining random mutagenesis and recombination with screening or selection for enzyme variants that have the desired properties. Directed evolution helps in enhancing the enzyme performance both in natural and synthetic environments. This article reviews the process of directed evolution and its application to improve substrate specificity, activity, enantioselectivity and thermal stability.

Enhancement of stability and activity of phospholipase A(1) in organic solvents by directed evolution

We attempted to apply the directed evolution approach to enhancing enzyme properties in the presence of organic solvents, in which enzyme stability and activity were often drastically reduced. Stability and catalytic activity of phospholipase A(1) in the presence of an organic solvent were enhanced by error-prone polymerase chain reaction (PCR) and DNA shuffling followed by a filter-based visual screening. Three mutants (SA8, SA17 and SA20) were isolated on indicator plates (i.e., 1% phosphatidylcholine gels containing 30% dimethyl sulfoxide (DMSO)) after a second mutant library was treated in 50% DMSO for 36 h. The half-life values of the three mutants exhibited an approximately 4-fold increase. The three mutants also exhibited increased stability in all organic solvents tested compared with the wild-type enzyme. Thus, an enzyme variant having superior catalytic efficiency in most of the organic solvents could be obtained by using any solvent suitable for designing the efficient screening system, regardless of the properties of the particular solvent.