Development and characterization of a green fluorescent protein-based bacterial biosensor for bioavailable toluene and related compounds

The Growth Yield of Aminobacter niigataensis MSH1 on the Micropollutant 2,6-Dichlorobenzamide Decreases Substantially at Trace Substrate Concentrations

2,6-Dichlorobenzamide (BAM) is an omnipresent micropollutant in European groundwaters. Aminobacter niigataensis MSH1 is a prime candidate for biologically treating BAM-contaminated groundwater since this organism is capable of utilizing BAM as a carbon and energy source. However, detailed information on the BAM degradation kinetics by MSH1 at trace concentrations is lacking, while this knowledge is required for predicting and optimizing the degradation process. Contaminating assimilable organic carbon (AOC) in media makes the biodegradation experiment a mixed-substrate assay and hampers exploration of pollutant degradation at trace concentrations. In this study, we examined how the BAM concentration affects MSH1 growth and BAM substrate utilization kinetics in a AOC-restricted background to avoid mixed-substrate conditions. Conventional Monod kinetic models were unable to predict kinetic parameters at low concentrations from kinetics determined at high concentrations. Growth yields on BAM were concentration-dependent and decreased substantially at trace concentrations; i.e., growth of MSH1 diminished until undetectable levels at BAM concentrations below 217 μg-C/L. Nevertheless, BAM degradation continued. Decreasing growth yields at lower BAM concentrations might relate to physiological adaptations to low substrate availability or decreased expression of downstream steps of the BAM catabolic pathway beyond 2,6-dichlorobenzoic acid (2,6-DCBA) that ultimately leads to Krebs cycle intermediates for growth and energy conservation.

Validation and calibration of a novel GEM biosensor for specific detection of Cd2+, Zn2+, and Pb2

BACKGROUND

In this study, we designed a novel genetic circuit sensitive to Cd2+, Zn2+ and Pb2+ by mimicking the CadA/CadR operon system mediated heavy metal homeostasis mechanism of Pseudomonas aeruginosa. The regular DNA motifs on natural operon were reconfigured and coupled with the enhanced Green Fluorescent Protein (eGFP) reporter to develop a novel basic NOT type logic gate CadA/CadR-eGFP to respond metal ions mentioned above. A Genetically Engineered Microbial (GEM)-based biosensor (E.coli-BL21:pJET1.2-CadA/CadR-eGFP) was developed by cloning the chemically synthesised CadA/CadR-eGFP gene circuit into pJET1.2-plasmid and transforming into Escherichia coli (E. coli)-BL21 bacterial cells.

RESULTS

The GEM-based biosensor cells indicated the reporter gene expression in the presence of Cd2+, Zn2+ and Pb2+ either singly or in combination. Further, the same biosensor cells calibrated for fluorescent intensity against heavy metal concentration generated linear graphs for Cd2+, Zn2+ and Pb2+ with the R2 values of 0.9809, 0.9761 and 0.9758, respectively as compared to non-specific metals, Fe3+ (0.0373), AsO43- (0.3825) and Ni2+ (0.8498) making our biosensor suitable for the detection of low concentration of the former metal ions in the range of 1-6 ppb. Furthermore, the GEM based biosensor cells were growing naturally within the concentration range of heavy metals, at 37 °C and optimum pH = 7.0 in the medium, resembling the characteristics of wildtype E.coli.

CONCLUSION

Finally, the novel GEM based biosensor cells developed in this study can be applied for detection of targeted heavy metals in low concentration ranges (1-6 ppb) at normal bacterial physiological conditions.

Curcumin-derived carbon-dots as a potential COVID-19 antiviral drug

Even entering the third year of the COVID-19 pandemic, only a small number of COVID-19 antiviral drugs are approved. Curcumin has previously shown antiviral activity against SARS-CoV-2 nucleocapsid, but its poor bioavailability limits its clinical uses. Utilizing nanotechnology structures, curcumin-derived carbon-dots (cur-CDs) were synthesized to increase low bioavailability of curcumin. In-silico analyses were performed using molecular docking, inhibition of SARS-CoV-2 nucleocapsid C-terminal domain (N-CTD) and antiviral activity were assessed in dimer-based screening system (DBSS) and in vitro respectively. Curcumin bound with the N-CTD at ΔG = -7.6 kcal/mol, however modifications into cur-CDs significantly improved the binding affinity and %interaction. Cur-CDs also significantly increased protection against SARS-CoV-2 in both DBSS and in vitro at MOI = 0.1. This study demonstrated the effect of post-infection treatment of curcumin and novel curcumin-derived carbon-dots on SARS-CoV-2 N-CTD dimerization. Further investigation on pre-infection and in-vivo treatment of curcumin and cur-CDs are required for a comprehensive understanding on the carbon-dots enhanced antiviral activity of curcumin against SARS-CoV-2.

High-throughput screening paradigms in ecotoxicity testing: Emerging prospects and ongoing challenges

The rapidly increasing number of new production chemicals coupled with stringent implementation of global chemical management programs necessities a paradigm shift towards boarder uses of low-cost and high-throughput ecotoxicity testing strategies as well as deeper understanding of cellular and sub-cellular mechanisms of ecotoxicity that can be used in effective risk assessment. The latter will require automated acquisition of biological data, new capabilities for big data analysis as well as computational simulations capable of translating new data into in vivo relevance. However, very few efforts have been so far devoted into the development of automated bioanalytical systems in ecotoxicology. This is in stark contrast to standardized and high-throughput chemical screening and prioritization routines found in modern drug discovery pipelines. As a result, the high-throughput and high-content data acquisition in ecotoxicology is still in its infancy with limited examples focused on cell-free and cell-based assays. In this work we outline recent developments and emerging prospects of high-throughput bioanalytical approaches in ecotoxicology that reach beyond in vitro biotests. We discuss future importance of automated quantitative data acquisition for cell-free, cell-based as well as developments in phytotoxicity and in vivo biotests utilizing small aquatic model organisms. We also discuss recent innovations such as organs-on-a-chip technologies and existing challenges for emerging high-throughput ecotoxicity testing strategies. Lastly, we provide seminal examples of the small number of successful high-throughput implementations that have been employed in prioritization of chemicals and accelerated environmental risk assessment.

Engineering whole-cell microbial biosensors: Design principles and applications in monitoring and treatment of heavy metals and organic pollutants

Biosensors have been widely used as cost-effective, rapid, in situ, and real-time analytical tools for monitoring environments. The development of synthetic biology has enabled emergence of genetically engineered whole-cell microbial biosensors. This review updates the design and optimization principles for a diverse array of whole-cell biosensors based on transcription factors (TF) including activators or repressors derived from heavy metal resistance systems, alkanes, and aromatics metabolic pathways of bacteria. By designing genetic circuits, the whole-cell biosensors could be engineered to intelligently sense heavy metals (Hg²⁺, Zn²⁺, Pb²⁺, Au³⁺, Cd²⁺, As³⁺, Ni²⁺, Cu²⁺, and UO₂²⁺) or organic compounds (alcohols, alkanes, phenols, and benzenes) through one-component or two-component system-based TFs, transduce signals through genetic amplifiers, and response as various outputs such as cell fluorescence and bioelectricity for monitoring heavy metals and organic pollutants in real conditions, synthetic curli and surface metal-binding peptides for in situ bio-sorption of heavy metals. We further review strategies that have been implemented to optimize the selectivity and correlation between ligand concentration and output signal of the TF-based biosensors, so as to meet requirements of practical applications. The optimization strategies include protein engineering to change specificities, promoter engineering to improve sensitivities, and genetic circuit-based amplification to enhance dynamic ranges via designing transcriptional amplifiers, logic gates, and feedback loops. At last, we outlook future trends in developing novel forms of biosensors.

Microbial whole-cell biosensors: Current applications, challenges, and future perspectives

Microbial Whole-Cell Biosensors (MWCBs) have seen rapid development with the arrival of 21st century biological and technological capabilities. They consist of microbial species which produce, or limit the production of, a reporter protein in the presence of a target analyte. The quantifiable signal from the reporter protein can be used to determine the bioavailable levels of the target analyte in a variety of sample types at a significantly lower cost than most widely used and well-established analytical instrumentation. Furthermore, the versatile and robust nature of MWCBs shows great potential for their use in otherwise unavailable settings and environments. While MWCBs have been developed for use in biomedical, environmental, and agricultural monitoring, they still face various challenges before they can transition from the laboratory into industrialized settings like their enzyme-based counterparts. In this comprehensive and critical review, we describe the underlying working principles of MWCBs, highlight developments for their use in a variety of fields, detail challenges and current efforts to address them, and discuss exciting implementations of MWCBs helping redefine what is thought to be possible with this expeditiously evolving technology.

Live-Cell Systems in Real-Time Biomonitoring of Water Pollution: Practical Considerations and Future Perspectives

Continuous monitoring and early warning of potential water contamination with toxic chemicals is of paramount importance for human health and sustainable food production. During the last few decades there have been noteworthy advances in technologies for the automated sensing of physicochemical parameters of water. These do not translate well into online monitoring of chemical pollutants since most of them are either incapable of real-time detection or unable to detect impacts on biological organisms. As a result, biological early warning systems have been proposed to supplement conventional water quality test strategies. Such systems can continuously evaluate physiological parameters of suitable aquatic species and alert the user to the presence of toxicants. In this regard, single cellular organisms, such as bacteria, cyanobacteria, micro-algae and vertebrate cell lines, offer promising avenues for development of water biosensors. Historically, only a handful of systems utilising single-cell organisms have been deployed as established online water biomonitoring tools. Recent advances in recombinant microorganisms, cell immobilisation techniques, live-cell microarrays and microfluidic Lab-on-a-Chip technologies open new avenues to develop miniaturised systems capable of detecting a broad range of water contaminants. In experimental settings, they have been shown as sensitive and rapid biosensors with capabilities to detect traces of contaminants. In this work, we critically review the recent advances and practical prospects of biological early warning systems based on live-cell biosensors. We demonstrate historical deployment successes, technological innovations, as well as current challenges for the broader deployment of live-cell biosensors in the monitoring of water quality.

Parasite Burden Measurement in the Leishmania major Infected Mice by Using the Direct Fluorescent Microscopy, Limiting Dilution Assay, and Real-Time PCR Analysis

Background:

We aimed to compare parasite burden in BALB/c mice, using three methods including the direct fluorescent microscopic using recombinant Leishmania major expressing an enhanced green fluorescent protein, limiting dilution assay, and real-time PCR technique.

Methods:

The current study was carried out in 2018, to induce stable enhanced green fluorescent protein (EGFP) production. Initially, the linearized DNA expression cassette (pLEXSY-egfp-sat2) was integrated into the ssu locus of L. major. The expression of EGFP in recombinant parasite was analyzed using direct fluorescent microscopy. Afterward, BALB/c mice were infected with the L. major ^EGFP, and the infection was evaluated in the foot-pads and inguinal lymph-nodes using an in vivo imaging system. Subsequently, eight BALB/c mice were infected with L. major ^EGFP, and the results of evaluating parasite burden by a SYBR-Green based real-time PCR analysis and the limiting dilution assays were compared to the results obtained from the direct fluorescent microscopy.

Results:

The results of the direct fluorescent microscopy showed that EGFP gene stably was expressed in parasites. Moreover, the in vivo imaging analysis of foot-pad lesions revealed that the infection caused by L. major ^EGFP was progressing over time. Additionally, significant correlations were observed between the results of parasite burden assay using the direct fluorescent microscopy and either limiting dilution assay (r=0.976, P<0.0001) or quantitative real-time PCR assay (r=0.857, P<0.001).

Conclusion:

Ultimately, the utilization of the direct fluorescent microscopy by employing a stable EGFP-expressing L. major is a suitable substitution for the existing methods to quantify parasite burden.

Typical organic pollutant-protein interactions studies through spectroscopy, molecular docking and crystallography: A review

With the development of industry and human society, more attention was paid for the toxic effects of organic pollutants that are closely related to human daily life. Previous studies mainly focused on the dose-response relationship and cytotoxic effects of pollutants to organisms，while little research focused on pollutant-protein interactions at molecular level. However, the binding of organic pollutants to biomolecules, especially proteins like transporters, membrane receptor and nuclear receptors, is often the first step of toxic effects. It can make a series of endocrine disrupting and genotoxic effects through cell signaling pathway by binding specific target proteins including serum albumin, thyroid transporter, estrogen receptor, androgen receptor, and aryl hydrocarbon receptor. Thus, the research of interactions between organic pollutants and proteins is helpful and necessary to understand the distribution, metabolism and toxicity mechanism of compounds in organisms at the molecular level. This paper reviewed the latest research progress of the interaction types of persistent organic pollutants (POPs), emerging pollutants and some other pollutants with targeted proteins. In addition, we summarized several main experimental techniques for studying pollutant-protein interactions including ultraviolet/visible absorption spectrometry (UV-vis), fluorescence, infrared spectrometry, circular dichroic spectra (CD), molecular docking and X-ray crystallography. This review contributes to the molecular mechanism of the interaction between organic pollutants and biomolecules.

Analysis of bioavailable toluene by using recombinant luminescent bacterial biosensors with different promoters

In this study, we constructed recombinant luminescent Escherichia coli with T7, T3, and SP6 promoters inserted between tol and lux genes as toluene biosensors and evaluated their sensitivity, selectivity, and specificity for measuring bioavailable toluene in groundwater and river water. The luminescence intensity of each biosensor depended on temperature, incubation time, ionic strength, and concentrations of toluene and coexisting organic compounds. Toluene induced the highest luminescence intensity in recombinant lux-expressing E. coli with the T7 promoter [T7-lux-E. coli, limit of detection (LOD) = 0.05 μM], followed by that in E. coli with the T3 promoter (T3-lux-E. coli, LOD = 0.2 μM) and SP6 promoter (SP6-lux-E. coli, LOD = 0.5 μM). Luminescence may have been synergistically or antagonistically affected by coexisting organic compounds other than toluene; nevertheless, low concentrations of benzoate and toluene analogs had no such effect. In reproducibility experiments, the biosensors had low relative standard deviation (4.3-5.8%). SP6-lux-E. coli demonstrated high adaptability to environmental interference. T7-lux-E. coli biosensor-with low LOD, wide measurement range (0.05-500 μM), and acceptable deviation (- 14.3 to 9.1%)-is an efficient toluene biosensor. This is the first study evaluating recombinant lux E. coli with different promoters for their potential application in toluene measurement in actual water bodies.

Development of a Sensitive Escherichia coli Bioreporter Without Antibiotic Markers for Detecting Bioavailable Copper in Water Environments

The whole-cell bioreporters based on the cop-operon sensing elements have been proven specifically useful in the assessment of bioavailable copper ions in water environments. In this study, a series of experiments was conducted to further improve the sensitivity and robustness of bioreporters. First, an Escherichia coli △copA△cueO△cusA mutant with three copper transport genes knocked out was constructed. Then, the copAp::gfpmut2 sensing element was inserted into the chromosome of E. coli △copA△cueO△cusA by gene knock-in method to obtain the bioreporter strain E. coli WMC-007. In optimized assay conditions, the linear detection range of Cu²⁺ was 0.025–5 mg/L (0.39–78.68 μM) after incubating E. coli WMC-007 in Luria–Bertani medium for 5 h. The limit of detection of Cu²⁺ was 0.0157 mg/L (0.25 μM). Moreover, fluorescence spectrometry and flow cytometry experiments showed more environmental robustness and lower background fluorescence signal than those of the sensor element based on plasmids. In addition, we found that the expression of GFPmut2 in E. coli WMC-007 was induced by free copper ions, rather than complex-bound copper, in a dose-dependent manner. Particularly, the addition of 40 mM 3-(N-Morpholino)propanesulfonic acid buffer to E. coli WMC-007 culture enabled accurate quantification of bioavailable copper content in aqueous solution samples within a pH range from 0.87 to 12.84. The copper recovery rate was about 95.88–113.40%. These results demonstrate potential applications of E. coli WMC-007 as a bioreporter to monitor copper contamination in acidic mine drainage, industrial wastewater, and drinking water. Since whole-cell bioreporters are relatively inexpensive and easy to operate, the combination of this method with other physicochemical techniques will in turn provide more specific information on the degree of toxicity in water environments.

Structure prediction and molecular docking studies of aromatic hydrocarbon sensing proteins TbuT, HbpR and PhnR to detect priority pollutants

On-line detection of aromatic hydrocarbon pollutants in aqueous environments can be achieved by biosensing strains having fusion of gene responsible for pollutant sensing protein with a reporter gene. Regulatory proteins TbuT, HbpR and PhnR are such proteins for recognizing one-, two-and three-ring aromatic hydrocarbon pollutants respectively, for which the structure is not known till date. Aim of the present study was to predict the structure of proteins and to determine their in-silico interaction with array of pollutants. Structure prediction of proteins was performed using I-TASSER and Phyre2 and refined with ModRefiner and 3DRefine. Total 14 models were obtained for each protein and the best model had more than 95% coverage in Ramachandran plot region. After successful structure prediction, molecular interaction of proteins with respective aromatic hydrocarbon pollutants categorized by United States Environmental Protection Agency was studied using AutoDockVina where the binding energy was found to fall in range of -4.6 to -8.4 kcal/mol. The types of protein-pollutant interaction were analyzed by LigPlus and Discovery Studio 2017 R2 Client which were found to be similar for standard and pollutant compounds. This study enables us to predict the range of pollutants possible to be detected using these regulatory protein-based biosensors.

A Genetically Encoded Biosensor for Monitoring Isoprene Production in Engineered Escherichia coli

Isoprene is a valuable precursor for synthetic rubber and a signature product of terpenoid pathways. Here, we developed an isoprene biosensor by employing a TbuT transcriptional regulator of Ralstonia pickettii to express a fluorescent reporter gene in response to intracellular isoprene in engineered Escherichia coli. The TbuT regulator recognizes isoprene as its less-preferred effector molecule; thus, we amplified the reporter gene expression using a T7 RNA polymerase-mediated transcriptional cascade and iteratively tuned the promoter transcribing tbuT to improve the sensitivity for detecting isoprene. When the engineered E. coli cells expressed heterologous genes for isoprene biosynthesis, the intracellular isoprene was expelled and the tbuT transcription factor was subsequently activated, leading to gfp expression. The chromosomal isoprene biosensor showed a linear correlation between GFP fluorescence and intracellular isoprene concentration. Using this chromosomal isoprene biosensor, we successfully identified the highest isoprene producer among four different E. coli strains producing different amounts of isoprene. The isoprene biosensor presented here can enable high-throughput screening of isoprene synthases and metabolic pathways for efficient and sustainable production of bioisoprene in engineered microbes.

Design of Protein-Based Biosensors for Selective Detection of Benzene Groups of Pollutants

Benzene and its derivatives form a class of priority pollutants whose exposure poses grave risk to human health. Since benzene lacks active functional groups, devising specific sensors for its direct detection from a milieu of aromatics has remained a daunting task. Here, we report three engineered protein-based biosensors that exclusively and specifically detect benzene and its derivatives up to a detection limit of 0.3 ppm. Further, the biosensor design has been engineered to create templates that possess the ability to specifically discriminate between alkyl substituted benzene derivatives; such as toluene, m-xylene, and mesitylene. Interference tests with simulated wastewater samples reveal that the engineered biosensors can selectively detect a specific benzene compound in water samples containing a milieu of high concentrations of commonly occurring pollutants. This work demonstrates the potential of structure guided protein engineering as a competent strategy toward design of selective biosensors for direct detection of benzene group of pollutants from real time environmental samples.

Development of a 2-Nitrobenzoate-Sensing Bioreporter Based on an Inducible Gene Cluster

Based on the sole information of structural genes of the 2-nitrobenzoate (2NBA) utilizing catabolic gene cluster (onbX1X2FCAR1EHJIGDBX3), 2NBA-sensing bioreporters were constructed by incorporating egfp into the onb gene cluster of Cupriavidus sp. strain ST-14. Incorporation of reporter gene in proximal to the hypothesized promoter region in conjunction with the disruption of the gene encoding inducer-metabolizing enzyme was turned out to be advantageous in reporter gene expression at low inducer concentration. The bioreporter strain was capable of expressing EGFP from the very 1st hour of induction and could detect 2NBA at (sub) nanomolar level exhibiting a strict specificity toward 2NBA, displaying no response to EGFP expression from its meta- and para-isomers as well as from a number of structurally related compounds. The present study is a successful demonstration of the development of a 2NBA-sensing bioreporter with respect to ease of construction, inducer specificity, and sensitivity, without prior knowledge of the associated inducer-responsive promoter-regulator elements. The present approach can be used as a model for the development of bioreporters for other environmental pollutants.

Driving mosquito refractoriness to Plasmodium falciparum with engineered symbiotic bacteria

The huge burden of malaria in developing countries urgently demands the development of novel approaches to fight this deadly disease. Although engineered symbiotic bacteria have been shown to render mosquitoes resistant to the parasite, the challenge remains to effectively introduce such bacteria into mosquito populations. We describe a Serratia bacterium strain (AS1) isolated from Anopheles ovaries that stably colonizes the mosquito midgut, female ovaries, and male accessory glands and spreads rapidly throughout mosquito populations. Serratia AS1 was genetically engineered for secretion of anti-Plasmodium effector proteins, and the recombinant strains inhibit development of Plasmodium falciparum in mosquitoes.

N-acylhomoserine lactone-regulation of genes mediating motility and pathogenicity in Pseudomonas syringae pathovar tabaci 11528

Pseudomonas syringae pathovar tabaci 11528 (P. syringae 11528) is a phytopathogen that causes wild-fire disease in soybean and tobacco plants. It utilizes a cell density-dependent regulation system known as quorum sensing (QS). In its QS system, the psyI is responsible for the biosynthesis of N-acylhomoserine lactones (AHLs). By comparing the transcripts from P. syringae 11528 wild-type strain with those of the ΔpsyI mutant using RNA sequencing (RNA-seq) technology, 1118 AHL-regulated genes were identified in the transition from exponential to stationary growth phase. Numerous AHL-regulated genes involved in pathogenicity were negatively controlled, including genes linked to flagella, chemotaxis, pilus, extracellular polysaccharides, secretion systems, and two-component system. Moreover, gene ontology and pathway enrichment analysis revealed that the most pronounced regulation was associated with bacterial motility. Finally, phenotypic assays showed that QS-regulated traits were involved in epiphytic growth of pathogens and disease development in plants. These findings imply that the AHL-mediated QS system in P. syringae 11528 plays significant roles in distinct stages of interactions between plants and pathogens, including early plant colonization and late plant infection.

Toxicity assessment using different bioassays and microbial biosensors

Toxicity assessment of water streams, wastewater, and contaminated sediments, is a very important part of environmental pollution monitoring. Evaluation of biological effects using a rapid, sensitive and cost effective method can indicate specific information on ecotoxicity assessment. Recently, different biological assays for toxicity assessment based on higher and lower organisms such as fish, invertebrates, plants and algal cells, and microbial bioassays have been used. This review focuses on microbial biosensors as an analytical device for environmental, food, and biomedical applications. Different techniques which are commonly used in microbial biosensing include amperometry, potentiometry, conductometry, voltammetry, microbial fuel cells, fluorescence, bioluminescence, and colorimetry. Examples of the use of different microbial biosensors in assessing a variety of environments are summarized.

Application of genetically engineered microbial whole-cell biosensors for combined chemosensing

The progress of genetically engineered microbial whole-cell biosensors for chemosensing and monitoring has been developed in the last 20 years. Those biosensors respond to target chemicals and produce output signals, which offer a simple and alternative way of assessment approaches. As actual pollution caused by human activities usually contains a combination of different chemical substances, how to employ those biosensors to accurately detect real contaminant samples and evaluate biological effects of the combined chemicals has become a realistic object of environmental researches. In this review, we outlined different types of the recent method of genetically engineered microbial whole-cell biosensors for combined chemical evaluation, epitomized their detection performance, threshold, specificity, and application progress that have been achieved up to now. We also discussed the applicability and limitations of this biosensor technology and analyzed the optimum conditions for their environmental assessment in a combined way.

Marine hydrocarbonoclastic bacteria as whole-cell biosensors for n-alkanes

Whole-cell biosensors offer potentially useful, cost-effective systems for the in-situ monitoring of seawater for hydrocarbons derived from accidental spills. The present work compares the performance of a biosensor system for the detection of alkanes in seawater, hosted in either Escherichia coli (commonly employed in whole-cell biosensors but not optimized for alkane assimilation) or different marine bacteria specialized in assimilating alkanes. The sensor system was based on the Pseudomonas putida AlkS regulatory protein and the PalkB promoter fused to a gene encoding the green fluorescent protein. While the E. coli sensor provided the fastest response to pure alkanes (25-fold induction after 2 h under the conditions used), a sensor based on Alcanivorax borkumensis was slower, requiring 3–4 h to reach similar induction values. However, the A. borkumensis sensor showed a fourfold lower detection threshold for octane (0.5 μM), and was also better at sensing the alkanes present in petrol. At petrol concentrations of 0.0125%, the A. borkumensis sensor rendered a sevenfold induction, while E. coli sensor showed no response. We discuss possible explanations to this behaviour in terms of the cellular adaptations to alkane uptake and the basal fluorescence produced by each bacterial strain, which was lowest for A. borkumensis.

Refinement of biodegradation tests methodologies and the proposed utility of new microbial ecology techniques

Society's reliance upon chemicals over the last few decades has led to their increased production, application and release into the environment. Determination of chemical persistence is crucial for risk assessment and management of chemicals. Current established OECD biodegradation guidelines enable testing of chemicals under laboratory conditions but with an incomplete consideration of factors that can impact on chemical persistence in the environment. The suite of OECD biodegradation tests do not characterise microbial inoculum and often provide little insight into pathways of degradation. The present review considers limitations with the current OECD biodegradation tests and highlights novel scientific approaches to chemical fate studies. We demonstrate how the incorporation of molecular microbial ecology methods (i.e., 'omics') may improve the underlying mechanistic understanding of biodegradation processes, and enable better extrapolation of data from laboratory based test systems to the relevant environment, which would potentially improve chemical risk assessment and decision making. We outline future challenges for relevant stakeholders to modernise OECD biodegradation tests and put the 'bio' back into biodegradation.

Fluorescent and bioluminescent cell-based sensors: strategies for their preservation

Luminescent whole-cell biosensing systems have been developed for a variety of analytes of environmental, clinical, and biological interest. These analytical tools allow for sensitive, rapid, simple, and inexpensive quantitative detection of target analytes. Furthermore, they can be designed to be nonspecific, semispecific, or highly specific/selective. A notable feature of such sensing systems employing living cells is that they provide information on the analyte bioavailability and activity. These characteristics, along with their suitability to miniaturization, make cell-based sensors ideal for field applications. However, a major limitation to on-site use is their "shelf-life." To address this problem, various methods for preservation of sensing cells have been reported, including freeze-drying, immobilization in different types of matrices, and formation of spores. Among these, the use of spores emerged as a promising strategy for long-term storage of whole-cell sensing systems at room temperature as well as in extreme environmental conditions.

Construction of a dual fluorescence whole-cell biosensor to detect N-acyl homoserine lactones

Detection of N-acyl homoserine lactones (AHLs) is useful for understanding quorum sensing (QS) behaviors, including biofilm formation, virulence and metabolism. For detecting AHLs and indicating the host cells in situ, we constructed the plasmid pUCGMA2T(1-4) to make a dual fluorescent whole-cell biosensor based on the AhlIR AHL system of Pseudomonas syringae pv. syringae B728a. The plasmid contains three components: constitutively expressed P(npatII::gfp) for indicating host cells, P(ahlI::mcherry) that produces red fluorescence in response to AHL, and the ahlR gene that encodes an AHL regulatory protein. Meanwhile, two copies of T(1-4) (four tandem copies of a transcriptional terminator) were added into the plasmid to reduce background. The results showed that when the plasmid was placed into Escherichia coli, the dual fluorescence whole-cell biosensor was able to respond with red fluorescence within 6 hr to 5 x 10(-8)-1 x 10(-5) mol/L of 3OC6-HSL. Bright green fluorescence indicated the host cells. Furthermore, when the plasmid was transferred to wildtype Pseudomonas PhTA125 (an AHL-producing bacterium), it also showed both green and red fluorescence. This result demonstrates that this plasmid can be used to construct whole-cell indicators that can indicate the AHL response and spatial behaviors of microbes in a microenvironmental niche.

Detection of organic compounds with whole-cell bioluminescent bioassays

Natural and manmade organic chemicals are widely deposited across a diverse range of ecosystems including air, surface water, groundwater, wastewater, soil, sediment, and marine environments. Some organic compounds, despite their industrial values, are toxic to living organisms and pose significant health risks to humans and wildlife. Detection and monitoring of these organic pollutants in environmental matrices therefore is of great interest and need for remediation and health risk assessment. Although these detections have traditionally been performed using analytical chemical approaches that offer highly sensitive and specific identification of target compounds, these methods require specialized equipment and trained operators, and fail to describe potential bioavailable effects on living organisms. Alternatively, the integration of bioluminescent systems into whole-cell bioreporters presents a new capacity for organic compound detection. These bioreporters are constructed by incorporating reporter genes into catabolic or signaling pathways that are present within living cells and emit a bioluminescent signal that can be detected upon exposure to target chemicals. Although relatively less specific compared to analytical methods, bioluminescent bioassays are more cost-effective, more rapid, can be scaled to higher throughput, and can be designed to report not only the presence but also the bioavailability of target substances. This chapter reviews available bacterial and eukaryotic whole-cell bioreporters for sensing organic pollutants and their applications in a variety of sample matrices.

pA506, a conjugative plasmid of the plant epiphyte Pseudomonas fluorescens A506

Conjugative plasmids are known to facilitate the acquisition and dispersal of genes contributing to the fitness of Pseudomonas spp. Here, we report the characterization of pA506, the 57-kb conjugative plasmid of Pseudomonas fluorescens A506, a plant epiphyte used in the United States for the biological control of fire blight disease of pear and apple. Twenty-nine of the 67 open reading frames (ORFs) of pA506 have putative functions in conjugation, including a type IV secretion system related to that of MOBP6 family plasmids and a gene cluster for type IV pili. We demonstrate that pA506 is self-transmissible via conjugation between A506 and strains of Pseudomonas spp. or the Enterobacteriaceae. The origin of vegetative replication (oriV) of pA506 is typical of those in pPT23A family plasmids, which are present in many pathovars of Pseudomonas syringae, but pA506 lacks repA, a defining locus for pPT23A plasmids, and has a novel partitioning region. We selected a plasmid-cured derivative of A506 and compared it to the wild type to identify plasmid-encoded phenotypes. pA506 conferred UV resistance, presumably due to the plasmid-borne rulAB genes, but did not influence epiphytic fitness of A506 on pear or apple blossoms in the field. pA506 does not appear to confer resistance to antibiotics or other toxic elements. Based on the conjugative nature of pA506 and the large number of its genes that are shared with plasmids from diverse groups of environmental bacteria, the plasmid is likely to serve as a vehicle for genetic exchange between A506 and its coinhabitants on plant surfaces.

Luteibacter rhizovicinus MIMR1 promotes root development in barley (Hordeum vulgare L.) under laboratory conditions

In order to preserve environmental quality, alternative strategies to chemical-intensive agriculture are strongly needed. In this study, we characterized in vitro the potential plant growth promoting (PGP) properties of a gamma-proteobacterium, named MIMR1, originally isolated from apple shoots in micropropagation. The analysis of the 16S rRNA gene sequence allowed the taxonomic identification of MIMR1 as Luteibacter rhizovicinus. The PGP properties of MIMR1 were compared to Pseudomonas chlororaphis subsp. aurantiaca DSM 19603(T), which was selected as a reference PGP bacterium. By means of in vitro experiments, we showed that L. rhizovicinus MIMR1 and P. chlororaphis DSM 19603(T) have the ability to produce molecules able to chelate ferric ions and solubilize monocalcium phosphate. On the contrary, both strains were apparently unable to solubilize tricalcium phosphate. Furthermore, the ability to produce 3-indol acetic acid by MIMR1 was approximately three times higher than that of DSM 19603(T). By using fluorescent recombinants of strains MIMR1 and DSM 19603(T), we also demonstrated that both bacteria are able to abundantly proliferate and colonize the barley rhizosphere, preferentially localizing on root tips and in the rhizoplane. Finally, we observed a negative effect of DSM 19603(T) on barley seed germination and plant growth, whereas MIMR1, compared to the control, determined a significant increase of the weight of aerial part (+22 %), and the weight and length of roots (+53 and +32 %, respectively). The results obtained in this work make L. rhizovicinus MIMR1 a good candidate for possible use in the formulation of bio-fertilizers.

Genetically modified whole-cell bioreporters for environmental assessment

Living whole-cell bioreporters serve as environmental biosentinels that survey their ecosystems for harmful pollutants and chemical toxicants, and in the process act as human and other higher animal proxies to pre-alert for unfavorable, damaging, or toxic conditions. Endowed with bioluminescent, fluorescent, or colorimetric signaling elements, bioreporters can provide a fast, easily measured link to chemical contaminant presence, bioavailability, and toxicity relative to a living system. Though well tested in the confines of the laboratory, real-world applications of bioreporters are limited. In this review, we will consider bioreporter technologies that have evolved from the laboratory towards true environmental applications, and discuss their merits as well as crucial advancements that still require adoption for more widespread utilization. Although the vast majority of environmental monitoring strategies rely upon bioreporters constructed from bacteria, we will also examine environmental biosensing through the use of less conventional eukaryotic-based bioreporters, whose chemical signaling capacity facilitates a more human-relevant link to toxicity and health-related consequences.

Highly sensitive, highly specific whole-cell bioreporters for the detection of chromate in environmental samples

Microbial bioreporters offer excellent potentialities for the detection of the bioavailable portion of pollutants in contaminated environments, which currently cannot be easily measured. This paper describes the construction and evaluation of two microbial bioreporters designed to detect the bioavailable chromate in contaminated water samples. The developed bioreporters are based on the expression of gfp under the control of the chr promoter and the chrB regulator gene of TnOtChr determinant from Ochrobactrum tritici 5bvl1. pCHRGFP1 Escherichia coli reporter proved to be specific and sensitive, with minimum detectable concentration of 100 nM chromate and did not react with other heavy metals or chemical compounds analysed. In order to have a bioreporter able to be used under different environmental toxics, O. tritici type strain was also engineered to fluoresce in the presence of micromolar levels of chromate and showed to be as specific as the first reporter. Their applicability on environmental samples (spiked Portuguese river water) was also demonstrated using either freshly grown or cryo-preserved cells, a treatment which constitutes an operational advantage. These reporter strains can provide on-demand usability in the field and in a near future may become a powerful tool in identification of chromate-contaminated sites.

Synthetic feedback loop model for increasing microbial biofuel production using a biosensor

Current biofuel production methods use engineered bacteria to break down cellulose and convert it to biofuel. A major challenge in microbial fuel production is that increasing biofuel yields can be limited by the toxicity of the biofuel to the organism that is producing it. Previous research has demonstrated that efflux pumps are effective at increasing tolerance to various biofuels. However, when overexpressed, efflux pumps burden cells, which hinders growth and slows biofuel production. Therefore, the toxicity of the biofuel must be balanced with the toxicity of pump overexpression. We have developed a mathematical model for cell growth and biofuel production that implements a synthetic feedback loop using a biosensor to control efflux pump expression. In this way, the production rate will be maximal when the concentration of biofuel is low because the cell does not expend energy expressing efflux pumps when they are not needed. Additionally, the microbe is able to adapt to toxic conditions by triggering the expression of efflux pumps, which allow it to continue biofuel production. Sensitivity analysis indicates that the feedback sensor model is insensitive to many system parameters, but a few key parameters can influence growth and production. In comparison to systems that express efflux pumps at a constant level, the feedback sensor increases overall biofuel production by delaying pump expression until it is needed. This result is more pronounced when model parameters are variable because the system can use feedback to adjust to the actual rate of biofuel production.

Fighting malaria with engineered symbiotic bacteria from vector mosquitoes

The most vulnerable stages of Plasmodium development occur in the lumen of the mosquito midgut, a compartment shared with symbiotic bacteria. Here, we describe a strategy that uses symbiotic bacteria to deliver antimalaria effector molecules to the midgut lumen, thus rendering host mosquitoes refractory to malaria infection. The Escherichia coli hemolysin A secretion system was used to promote the secretion of a variety of anti-Plasmodium effector proteins by Pantoea agglomerans, a common mosquito symbiotic bacterium. These engineered P. agglomerans strains inhibited development of the human malaria parasite Plasmodium falciparum and rodent malaria parasite Plasmodium berghei by up to 98%. Significantly, the proportion of mosquitoes carrying parasites (prevalence) decreased by up to 84% for two of the effector molecules, scorpine, a potent antiplasmodial peptide and (EPIP)(4), four copies of Plasmodium enolase-plasminogen interaction peptide that prevents plasminogen binding to the ookinete surface. We demonstrate the use of an engineered symbiotic bacterium to interfere with the development of P. falciparum in the mosquito. These findings provide the foundation for the use of genetically modified symbiotic bacteria as a powerful tool to combat malaria.

Minimization of treatment time for in vitro 1.1 MHz destruction of Pseudomonas aeruginosa biofilms by high-intensity focused ultrasound

Medical implants are prone to colonization by bacterial biofilms. Normally, surgery is required to replace the infected implant. One promising noninvasive modality is to destroy biofilms with high-intensity focused ultrasound. In our study, Pseudomonas aeruginosa biofilms were grown on implant-mimicking graphite disks in a flow chamber for 3 days prior to exposing them to ultrasound pulses. Exposure time at each treatment location was varied between 5, 15 and 30s. Burst period was varied between 1, 3, 6 and 12 milliseconds (ms). The pulses were 20 cycles in duration at 1.1 MHz from a spherically focused transducer (f/1, 63 mm focal length), creating peak compressional and rarefactional pressures at the graphite disk surface of 30 and 13 MPa, respectively. P. aeruginosa were tagged with green fluorescent protein, and killed cells were visualized using propidium iodide before determining the extent of biofilm destruction. The exposure-induced temperature rise was measured to be less than 0.2°C at the focus, namely the interface between graphite disk and water. Then, the temperature rise was measured at the focus between the graphite disk and a tissue-mimicking phantom to evaluate therapy safety. Two thresholds, of bacteria destruction increase and of complete bacteria removal, respectively, were identified to divide our eight exposure conditions. Results indicated that 30-s exposure and 6-ms pulse period were sufficient to destroy the biofilms. However, the 15-s exposure and 3-ms pulse period were viewed as optimum when considering exposure time, efficacy, and safety.

The construction of a whole-cell biosensor for phosphonoacetate, based on the LysR-like transcriptional regulator PhnR from Pseudomonas fluorescens 23F

The phnA gene that encodes the carbon‐phosphorus bond cleavage enzyme phosphonoacetate hydrolase is widely distributed in the environment, suggesting that its phosphonate substrate may play a significant role in biogeochemical phosphorus cycling. Surprisingly, however, no biogenic origin for phosphonoacetate has yet been established. To facilitate the search for its natural source we have constructed a whole‐cell phosphonoacetate biosensor. The gene encoding the LysR‐type transcriptional activator PhnR, which controls expression of the phosphonoacetate degradative operon in Pseudomonas fluorescens 23F, was inserted in the broad‐host‐range promoter probe vector pPROBE‐NT, together with the promoter region of the structural genes. Cells of Escherichia coli DH5α that contained the resultant construct, pPANT3, exhibited phosphonoacetate‐dependent green fluorescent protein fluorescence in response to threshold concentrations of as little as 0.5 µM phosphonoacetate, some 100 times lower than the detection limit of currently available non‐biological analytical methods; the pPANT3 biosensor construct in Pseudomonas putida KT2440 was less sensitive, although with shorter response times. From a range of other phosphonates and phosphonoacetate analogues tested, only phosphonoacetaldehyde and arsonoacetate induced green fluorescent protein fluorescence in the E. coli DH5α (pPANT3) biosensor, although at much‐reduced sensitivities (50 µM phosphonoacetaldehyde and 500 µM arsonoacetate).

Mutant HbpR transcription activator isolation for 2-chlorobiphenyl via green fluorescent protein-based flow cytometry and cell sorting

Mutants were produced in the A-domain of HbpR, a protein belonging to the XylR family of σ(54)-dependent transcription activators, with the purpose of changing its effector recognition specificity from 2-hydroxybiphenyl (2-HBP, the cognate effector) to 2-chlorobiphenyl (2-CBP). Mutations were introduced in the hbpR gene part for the A-domain via error-prone polymerase chain reaction, and assembled on a gene circuitry plasmid in Escherichia coli, permitting HbpR-dependent induction of the enhanced green fluorescent protein (egfp). Cells with mutant HbpR proteins responsive to 2-CBP were enriched and separated in a flow cytometry-assisted cell-sorting procedure. Some 70 mutants were isolated and the A-domain mutations mapped. One of these had acquired true 2-CBP recognition but reacted hypersensitively to 2-HBP (20-fold more than the wild type), whereas others had reduced sensitivity to 2-HBP but a gain of 2-CBP recognition. Sequencing showed that most mutants carried double or triple mutations in the A-domain gene part, and were not located in previously recognized conserved residues within the XylR family members. Further selection from a new mutant pool prepared of the hypersensitive mutant did not result in increased 2-CBP or reduced 2-HBP recognition. Our data thus demonstrate that a one-step in vitro 'evolutionary' adaptation of the HbpR protein can result in both enhancement and reduction of the native effector recognition.

Design and characterization of an aequorin-based bacterial biosensor for detection of toluene and related compounds

An aequorin-based Escherichia coli strain JM109 biosensor was constructed and characterized for its potential to detect toluene and related compounds in aqueous solutions. The biosensor was constructed based on a PGL2 plasmid carrying the lower pathway promoter (Pu) of the xyl operon of Pseudomonas putida mt-2, which was incorporated with transcriptional activator xylR and fused to aequorin cDNA named pGL2-aequorin. Binding of xylR protein to a subset of toluene-like compounds activates transcription at the Pu promoter, thus expression of aequorin is controlled by xylR and Pu. In this work we have compared the effect of Shine-Dalgarno (SD) and T2 rrnβ terminator sequence in the expression of aequorin. According to the sensitivity of aequorin and increase in the signal-to-noise ratio, this reporter enzyme has reasonable sensitivity compared with other reporter systems. The results indicate higher expression of aequorin in the presence of SD and T2 rrnβ. The activity of aequorin in recombinant whole-cell biosensor was linear from 1 to 500 μm of toluene. The bioluminescence response was specific for toluene-like molecules, so this biosensor cells would be able to detect toluene derivative contamination in environmental samples, accurately.

Development of microbial engineered whole-cell systems for environmental benzene determination

This paper reports the development of two recombinant bacterial systems that can be used to monitor environmental benzene contamination based on Escherichia coli, which carry genes coding for benzene dioxygenase and benzene dihydrodiol dehydrogenase from Pseudomonas putida MST. E. coli strains express these two enzymes under the control of the Ptac promoter or without any induction. These activities can be detected electrochemically or colorimetrically and used to monitor benzene pollution in environmental air samples collected from an oil refinery assessing benzene by different laboratory experimental procedures. The procedures involving whole-cell bioassays determine the concentration of benzene through benzene dioxygenase activity, which allows for direct correlation of oxygen consumption, and through the benzene dihydrodiol dehydrogenase that causes catechol accumulation and restores NADH necessary for the activity of the first enzyme. Oxygen consumption and catechol production deriving from both enzymatic activities are related to benzene concentration and their measurements determined the sensitivity of the system. The results indicated that the sensitivity was enough to detect the benzene vapor at a lower concentration level of 0.01 mM in about 30 min. The possibility for on-line monitoring of benzene concentration by our new recombinant cells results from the fact that no particular treatment of environmental samples is required. This is a major advantage over other biosensors or assays. Moreover, the development of microbial cells that did not require any addition or effectors for the transcription of the specific enzymes, allowed these systems to be more versatile in automated environmental benzene monitoring.

Use of reporter-gene based bacteria to quantify phenanthrene biodegradation and toxicity in soil

A phenanthrene-degrading bacterium, Sphingomonas paucimobilis EPA505 was used to construct two fluorescence-based reporter strains. Strain D harboring gfp gene was constructed to generate green fluorescence when the strain started to biodegrade phenanthrene. Strain S possessing gef gene was designed to die once phenanthrene biodegradation was initiated and thus to lose green fluorescence when visualized by a live/dead cell staining. Confocal laser scanning microscopic observation followed by image analysis demonstrates that the fluorescence intensity generated by strain D increased and the intensity by strain S decreased linearly at the phenanthrene concentration of up to 200 mg/L. Such quantitative increase and decrease of fluorescence intensity in strain D (i.e., from 1 to 11.90 ± 0.72) and strain S (from 1 to 0.40 ± 0.07) were also evident in the presence of Ottawa sand spiked with the phenanthrene up to 1000 mg/kg. The potential use of the reporter strains in quantitatively determining biodegradable or toxic phenanthrene was discussed.

Fiber optic monooxygenase biosensor for toluene concentration measurement in aqueous samples

Measurements of pollutants such as toluene are critical for the characterization of contaminated sites and for the monitoring of remediation processes and wastewater treatment effluents. Fiber optic enzymatic biosensors have the potential to provide cost-effective, real time, continuous, in situ measurements. In this study, a fiber optic enzymatic biosensor was constructed and characterized for the measurement of toluene concentrations in aqueous solutions. The biological recognition element was toluene ortho-monooxygenase (TOM), expressed by Escherichia coli TG1 carrying pBS(Kan)TOM, while an optical fiber coated with an oxygen-sensitive ruthenium-based phosphorescent dye served as the transducer. Toluene was detected based on the enzymatic reaction catalyzed by TOM, which resulted in the consumption of oxygen and changes in the phosphorescence intensity. The biosensor was found to have a limit of detection of 3 μM, a linear signal range up to 100 μM, and a response time of 1 h. The performance was reproducible with different biosensors (RSD=7.4%, n=8). The biosensor activity declined with each measurement and with storage time, particularly at elevated temperatures. This activity loss could be partially reversed by exposure to formate, suggesting that NADH consumption was the primary factor limiting lifetime. This is the first report of an enzymatic toluene sensor and of an oxygenase-based biosensor. Since many oxygenases have been reported, the design concept of this oxygenase-based biosensor has the potential to broaden biosensor applications in environmental monitoring.

Construction and characterization of Escherichia coli whole-cell biosensors for toluene and related compounds

The XylR regulatory protein is a transcriptional activator from the TOL plasmid of Pseudomonas putida mt-2 that is involved in the toluene and benzene degradation pathway. Here we describe the construction and laboratory characterization of recombinant biosensors (pGLPX plasmids) based on XylR and its cognate promoter (Pu). In the pGLPX plasmid, the reporter luc gene is under the control of the Pu promoter. We evaluated the ability of two distinct nucleotide sequences to function as SD elements and improve sensitivity of bioreporting. We also evaluated the effect of introducing the T₂rrnβ terminator on the specificity of the construct. E. coli transformed with pGLPX plasmids were used to sense toluene and its derivatives. The pattern of induction was different for each derivative. In general, more luciferase activity was induced by toluene and benzene than by TNT and DNT at most tested concentrations. The bioluminescence response of the reporter strains to the nitrotoluenes was significantly stronger at lower concentrations (≥ 50 μmol) than at higher concentrations. Our results show that the SD sequence (taaggagg) is crucially important for biosensor sensitivity. The presence of the T₂rrnβ terminator in the bioreporter plasmid prevents nonspecific responses and also reduces biosensor sensitivity upon exposure to inducers. These data suggest that pGLPX strains can be used as whole-cell biosensors to detect toluene and related compounds. Further investigation will be required to optimize the application of pGLPX biosensors.

Whole-cell fluorescent biosensors for bioavailability and biodegradation of polychlorinated biphenyls

Whole-cell microbial biosensors are one of the newest molecular tools used in environmental monitoring. Such biosensors are constructed through fusing a reporter gene such as lux, gfp or lacZ, to a responsive promoter. There have been many reports of the applications of biosensors, particularly their use in assaying pollutant toxicity and bioavailability. This paper reviews the basic concepts behind the construction of whole-cell microbial biosensors for pollutant monitoring, and describes the applications of two such biosensors for detecting the bioavailability and biodegradation of Polychlorinated Biphenyls (PCBs).

Sensitive fluorescent microplate bioassay using recombinant Escherichia coli with multiple promoter-reporter units in tandem for detection of arsenic

Genetically modified bacterial biosensors can detect specific environmental compounds. Here, we attempted to establish a fluorescent microplate method to detect arsenic using recombinant Escherichia coli cells transformed with plasmids harboring three tandem copies of the ars promoter/operator-the gene for green fluorescent protein (gfp). In the biosensors, one copy of arsR, whose transcription is autoregulated by the ars promoter/operator and ArsR in the genome of E. coli, was placed in trans in another plasmid under the control of isopropyl-1-thio-beta-D-galactopyranoside-inducible promoter. First, this manipulation enabled regulation of the arsR expression at an adequate level. Second, the copy number of reporter unit also affected signal and noise. When the plasmid harboring three copies of the reporter unit was used, the signal-to-noise ratio doubled and the detection limit decreased from 20 to 7.5 microg L(-1) As(III), compared to the use of the plasmid harboring one copy of the ars promoter/operator-arsR-gfp. Thus, segregation of arsR from the ars promoter/operator-gfp using two plasmids is effective in regulating the signal-to-noise ratio and the detection limit with the different functions.

Stress tolerance and environmental fitness of Pseudomonas fluorescens A506, which has a mutation in RpoS

Establishment of suppressive populations of bacterial biological control agents on aerial plant surfaces is a critical phase in biologically based management of floral diseases. Periodically, biocontrol agents encounter inhospitable conditions for growth on plants; consequently, tolerance of environmental stresses may contribute to their fitness. In many gram-negative bacteria, including strains of Pseudomonas spp., the capacity to survive environmental stresses is influenced by the stationary phase sigma factor RpoS. This study focused on the role of RpoS in stress response and epiphytic fitness of Pseudomonas fluorescens A506, a well-studied bacterial biological control agent. We detected a frameshift mutation in the rpoS of A506 and demonstrated that the mutation resulted in a truncated, nonfunctional RpoS. Using site-directed mutagenesis, we deleted a nucleotide from rpoS, which then encoded a full-length, functional RpoS. We compared the stress response and epiphytic fitness of A506 with derivative strains having the functional full-length RpoS or a disrupted, nonfunctional RpoS. RpoS had little effect on stress response of A506 and no consistent influence on epiphytic population size of A506 on pear or apple leaves or flowers. Although the capacity of strain A506 to withstand exposure to environmental stresses was similar to that of other fluorescent pseudomonads, this capacity was largely independent of rpoS.