Molecular cloning and expression in Saccharomyces cerevisiae of a laccase gene from the ascomycete Melanocarpus albomyces

Biodegradation of Naphthalene Using Biosurfactant Producing Fusarium proliferatum WC416 Isolated from Refinery Effluent

Naphthalene is one of the priority pollutants in the environment which can effectively managed through bioremediation approach. Here fungal remediation of PAHs may be cost-effective technology. In present research study, biodegradation of naphthalene at varying concentrations in laboratory scale was investigated using Fusarium proliferatum WC416 isolated from refinery effluent. Degradation of naphthalene was computed by high-performance liquid chromatography (HPLC) and gas chromatography -mass spectroscopy (GC-MS). The results show that Fusarium proliferatum WC416 has effectively degraded the naphthalene to salicylamide and salicylic acid. The highest degradation achieved was 83% for the concentration of 100 ppm followed 74% and 63% for the concentration of 250 ppm and 500 ppm respectively. The intermediates confirmed by GC-MS were salicylic acid (m/z identification 138) and salicylamide (m/z identification 137). During the study, fungal growth, COD, pH, and surface tension have been monitored, which show the continuous variation that indicates progressive biodegradation of naphthalene. The qualitative assessment of extracellular enzymes shows positive activity for lipase, manganese peroxidase, and laccase. The present study also assessed the biosurfactant production by fungus which was characterized as sophorolipid in nature. The study suggests that Fusarium proliferatum WC416 would be an efficient degrader of naphthalene for environmental clean-up.

Non-conventional expression of recombinant chitinase A originated from Bacillus licheniformis DSM8785, in Saccharomyces cerevisiae INVSc1

Chitinases are glycosyl hydrolases, that cleave the ?-1,4 linkage between N-acetyl glucosamines present in chitin chains. Chitin is the second most abundant polysaccharide on Earth after cellulose, and it is produced in the exoskeleton of crustaceans and insects, and in some parts of the cell walls of fungi. Enzymatic development and the extraction of superior derivatives from chitin wastes - such as chitooligosaccharides with vast importance in the medical and biofuels industry - lead to the necessity of creating chitinases using different strains of organisms. In this paper, the chiA gene from the Bacillus licheniformis DSM8785 encoding chitinase A (ChiA) with C-terminal hexahistidine tag was cloned and expressed in the extracellular expression system pYES2 from Saccharomyces cerevisiae INVSc1 as a hyperglycosylated enzyme. The production of recombinant ChiA was successfully confirmed by dot blotting, using anti-His antibodies. The optimal time of expression was identified to be 24 h when galactose was added only at the beginning of fermentation, the chitinase activity starting to decrease after this threshold. Nevertheless, in another experiment, when galactose was added every 24 h for 72 h, the expression continued for the entire period. The purified enzyme was detected, using sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE), as a heterogeneous diffuse band between 80 and 180 kDa. The molecular mass of the same ChiA enzyme expressed in Pichia pastoris KM71H and Escherichia coli BL21 (DE3) was compared using SDS-PAGE with ChiA expressed in Saccharo-myces cerevisiae INVSc1. The activity of ChiA was determined using the fluorogenic substrate, 4-methylumbelliferyl ?-D-N,N,N-triacetylchitotrioside (4MUTC). Using a bioinformatics simulation, the number of the glycolsylation sites of the chiA gene sequence and the proximity of these sites to the alpha factor sequence were hypothesized to be a possible reason for which ChiA enzyme was internally expressed.

Optimisation of the Production and Bleaching Process for a New Laccase from Madurella mycetomatis, Expressed in Pichia pastoris: from Secretion to Yielding Prominent

Laccases are polyphenol oxidoreductases used in a number of industrial applications. Due to the increasing demand for these "green catalysis" enzymes, the identification and biochemical characterisation of their novel properties is essential. In our study, cloned Madurella mycetomatis laccase (mmlac) genes were heterologously expressed in the methylotrophic yeast host Pichia pastoris. The high yield of the active recombinant protein in P. pastoris demonstrates the efficiency of a reliably constructed plasmid to express the laccase gene. The optimal biochemical conditions for the successfully expressed MmLac enzyme were identified. Detailed structural properties of the recombinant laccase were determined, and its utility in decolourisation and textile bleaching applications was examined. MmLac demonstrates good activity in an acidic pH range (4.0-6.0); is stable in the presence of cationic metals, organic solvents and under high temperatures (50-60 °C); and is stable for long-term storage at - 20 °C and - 80 °C for up to eight weeks. The structural analysis revealed that the catalytic residues are partially similar to other laccases. MmLac resulted in an increase in whiteness, whilst demonstrating high efficiency and stability and requiring the input of fewer chemicals. The performance of this enzyme makes it worthy of investigation for use in textile biotechnology applications, as well as within environmental and food technologies.

Aptitude of Oxidative Enzymes for Treatment of Wastewater Pollutants: A Laccase Perspective

Natural water sources are very often contaminated by municipal wastewater discharges which contain either of xenobiotic pollutants and their sometimes more toxic degradation products, or both, which frustrates the universal millenium development goal of provision of the relatively scarce pristine freshwater to water-scarce and -stressed communities, in order to augment their socioeconomic well-being. Seeing that both regulatory measures, as regards the discharge limits of wastewater, and the query for efficient treatment methods remain unanswered, partially, the prospects of enzymatic treatment of wastewater is advisable. Therefore, a reconsideration was assigned to the possible capacity of oxidative enzymes and the respective challenges encountered during their applications in wastewater treatment, and ultimately, the prospects of laccase, a polyphenol oxidase that oxidizes aromatic and inorganic substrates with electron-donating groups in treatment aromatic contaminants of wastewater, in real wastewater situations, since it is assumed to be a vehicle for a greener community. Furthermore, the importance of laccase-driven catalysis toward maintaining mass-energy balance, hence minimizing environmental waste, was comprehensibly elucidated, as well the strategic positioning of laccase in a model wastewater treatment facility for effective treatment of wastewater contaminants.

Structural and functional characterisation of multi-copper oxidase CueO from lignin-degrading bacterium Ochrobactrum sp. reveal its activity towards lignin model compounds and lignosulfonate

The identification of enzymes responsible for oxidation of lignin in lignin-degrading bacteria is of interest for biotechnological valorization of lignin to renewable chemical products. The genome sequences of two lignin-degrading bacteria, Ochrobactrum sp., and Paenibacillus sp., contain no B-type DyP peroxidases implicated in lignin degradation in other bacteria, but contain putative multicopper oxidase genes. Multi-copper oxidase CueO from Ochrobactrum sp. was expressed and reconstituted as a recombinant laccase-like enzyme, and kinetically characterized. Ochrobactrum CueO shows activity for oxidation of β-aryl ether and biphenyl lignin dimer model compounds, generating oxidized dimeric products, and shows activity for oxidation of Ca-lignosulfonate, generating vanillic acid as a low molecular weight product. The crystal structure of Ochrobactrum CueO (OcCueO) has been determined at 1.1 Å resolution (PDB: 6EVG), showing a four-coordinate mononuclear type I copper center with ligands His495, His434 and Cys490 with Met500 as an axial ligand, similar to that of Escherichia coli CueO and bacterial azurin proteins, whereas fungal laccase enzymes contain a three-coordinate type I copper metal center. A trinuclear type 2/3 copper cluster was modeled into the active site, showing similar structure to E. coli CueO and fungal laccases, and three solvent channels leading to the active site. Site-directed mutagenesis was carried out on amino acid residues found in the solvent channels, indicating the importance for residues Asp102, Gly103, Arg221, Arg223, and Asp462 for catalytic activity. The work identifies a new bacterial multicopper enzyme with activity for lignin oxidation, and implicates a role for bacterial laccase-like multicopper oxidases in some lignin-degrading bacteria.

DATABASE

Structural data are available in the PDB under the accession number 6EVG.

Expression of a new laccase from Moniliophthora roreri at high levels in Pichia pastoris and its potential application in micropollutant degradation

Laccases have gained significant attention due to their emerging applications including bioremediation, biomass degradation and biofuel cells. One of the prerequisites for the industrial application of laccases is their sufficient availability. However, expression levels of recombinantly expressed laccases are often low. In this study Mrl2, a new laccase from the basidiomycete Moniliophthora roreri, was cloned in Pichia pastoris and produced in an optimized fed-batch process at an exceptionally high yield of 1.05 g l⁻¹. With a redox potential of 0.58 V, Mrl2 belongs to mid-redox potential laccases. However, Mrl2 demonstrated high k_cat values of 316, 20, 74, and 36 s⁻¹ towards 2,2′-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS), syringaldazine (SGZ), 2,6-dimethoxyphenol (2,6-DMP) and guaiacol, respectively. Mrl2 remained stable above pH 6 and in the presence of many metal ions, which is important for application in bioremediation. Mrl2 was investigated for the ability to degrade endocrine disrupting chemicals (EDCs) and non-steroidal anti-inflammatory drugs (NSDAIs) at neutral pH value. The enzyme accepted and converted estrone, 17β-estradiol, estriol, the synthetic contraceptive 17α-ethinyl estradiol and bisphenol A at pH 7 faster than high-potential laccases from Trametes versicolor. For example, within 30 min Mrl2 removed more than 90% bisphenol A, 17ß-estradiol, 17α-ethinyl estradiol and estriol, respectively. The concentration of the recalcitrant drug diclofenac dropped by 56% after 20 h incubation with Mrl2.

Recombinant expression of a laccase from Coriolopsis gallica in Pichia pastoris using a modified α-factor preproleader

In this work we communicate the heterologous expression of a laccase from Coriolopsis gallica in Pichia pastoris. This enzyme has been reported to efficiently degrade a variety of pollutants such as industrial dyes. The expression strategy included using a previously reported modified α-factor preproleader for enhanced secretion and pAOX1, a methanol-responsive promoter. Methanol concentration, copper salts concentration and temperature were varied in order to enhance laccase expression in this heterologous system. A volumetric activity of 250 U/L was achieved after 12-day culture in Fernbach flasks. The protein was recovered from the supernatant and purified, obtaining a preparation with 90% electrophoretic purity. The catalytic constants of the recombinant enzyme are almost identical to the fungal enzyme, thus rendering this system a useful tool for protein engineering of laccase from C. gallica.

Screening Mutant Libraries of Fungal Laccases in the Presence of Organic Solvents

Reliable screening methods are being demanded by biocatalysts’ engineers, especially when some features such as activity or stability are targets to improve under nonnatural conditions (i.e., in the presence of organic solvents). The current work describes a protocol for the design of a fungal laccase—expressed in Saccharomyces cerevisiae—highly active in organic cosolvents. A high-throughput screening assay based on ABTS (2,2′-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid)) oxidation was validated. The stability of the ABTS radical cation was not significantly altered in the presence of acetonitrile, ethanol, or DMSO. With a coefficient of variance below 10% and a sensitivity limit of 15 pg laccase/μL, the assay was reproducible and sensitive. The expression system of Myceliophthora thermophila laccase variant T2 in S. cerevisiae was highly dependent on the presence of Cu2+. Copper concentration was limited up to 10 μM CuSO4 where expression levels (~14-18 mg/L) were acceptable without compromising the reliability of the assay. A mutant library was created by error-prone PCR with 1.1 to 3.5 mutations per kb. After only 1 generation of directed evolution, mutant 6C9 displayed about 3.5-fold higher activities than parent type in the presence of 20% acetonitrile or 30% ethanol. The method provided here should be generally useful to improve the activity of other redox enzymes in mixtures of water/cosolvents.

Heterologous expression of a new manganese-dependent peroxidase gene from Peniophora incarnata KUC8836 and its ability to remove anthracene in Saccharomyces cerevisiae

The white rot fungus Peniophora incarnata KUC8836 has received an attention as the greatest degrader of polycyclic aromatic hydrocarbons (PAHs), which are hazardous xenobiotics and recalcitrant pollutants. To characterize the mechanisms through which MnP degrades PAHs, heterologous expression of manganese-dependent peroxidase (MnP) gene pimp1 was performed in Saccharomyces cerevisiae BY4741 via the pGEM-T Easy vector, resulting in the recombinant plasmid pESC-URA/pimp1 containing the MnP signal peptide. MnP was significantly secreted into the culture medium with galactose as an active protein with higher efficiency (3.58 U mL^-1) by transformants than by the wild-type S. cerevisiae. The recombinant MnP protein was shown to have a molecular weight of 44 kDa by western blotting analysis. With regard to enhancing the bioremediation of PAHs in the environment, anthracene was effectively degraded by the MnP encoded by pimp1, with a degradation rate of 6.5% when Tween 80 was added. In addition, the MnP activity of the transformant exhibited the highest efficiency (2.49 U mL^-1) during the degradation. These results show that pimp1 might be useful for biodegradation and gene expression technologies at a transcriptional level, and genetic approaches can be improved by incorporating the highly ligninolytic gene pimp1 and the fungus P. incarnata KUC8836.

Diversity of laccase-coding genes in Fusarium oxysporum genomes

Multiple studies confirm laccase role in fungal pathogenicity and lignocellulose degradation. In spite of broad genomic research, laccases from plant wilt pathogen Fusarium oxysporum are still not characterized. The study aimed to identify F. oxysporum genes that may encode laccases sensu stricto and to characterize the proteins in silico in order to facilitate further research on their impact on the mentioned processes. Twelve sequenced F. oxysporum genomes available on Broad Institute of Harvard and MIT (2015) website were analyzed and three genes that may encode laccases sensu stricto were found. Their amino acid sequences possess all features essential for their catalytic activity, moreover, the homology models proved the characteristic 3D laccase structures. The study shades light on F. oxysporum as a new source of multicopper oxidases, enzymes with possible high redox potential and broad perspective in biotechnological applications.

Biochemical properties and yields of diverse bacterial laccase-like multicopper oxidases expressed in Escherichia coli

Laccases are multi-copper oxidases that oxidize a broad range of substrates at the expense of molecular oxygen, without any need for co-factor regeneration. These enzymes bear high potential for the sustainable synthesis of fine chemicals and the modification of (bio)polymers. Here we describe cloning and expression of five novel bacterial laccase-like multi copper oxidases (LMCOs) of diverse origin which were identified by homology searches in online databases. Activity yields under different expression conditions and temperature stabilities were compared to three previously described enzymes from Bacillus subtilis, Bacillus pumilus and Bacillus clausii. In almost all cases, a switch to oxygen-limited growth conditions after induction increased volumetric activity considerably. For proteins with predicted signal peptides for secretion, recombinant expression with and without signal sequence was investigated. Bacillus CotA-type LMCOs outperformed enzymes from Streptomyces and Gram-negative bacteria with respect to activity yields in Escherichia coli and application relevant biochemical properties. The novel Bacillus coagulans LMCO combined high activity yields in E. coli with unprecedented activity at strong alkaline pH and high storage stability, making it a promising candidate for further development.

Molecular adaptation mechanisms employed by ethanologenic bacteria in response to lignocellulose-derived inhibitory compounds

Current international interest in finding alternative sources of energy to the diminishing supplies of fossil fuels has encouraged research efforts in improving biofuel production technologies. In countries which lack sufficient food, the use of sustainable lignocellulosic feedstocks, for the production of bioethanol, is an attractive option. In the pre-treatment of lignocellulosic feedstocks for ethanol production, various chemicals and/or enzymatic processes are employed. These methods generally result in a range of fermentable sugars, which are subjected to microbial fermentation and distillation to produce bioethanol. However, these methods also produce compounds that are inhibitory to the microbial fermentation process. These compounds include products of sugar dehydration and lignin depolymerisation, such as organic acids, derivatised furaldehydes and phenolic acids. These compounds are known to have a severe negative impact on the ethanologenic microorganisms involved in the fermentation process by compromising the integrity of their cell membranes, inhibiting essential enzymes and negatively interact with their DNA/RNA. It is therefore important to understand the molecular mechanisms of these inhibitions, and the mechanisms by which these microorganisms show increased adaptation to such inhibitors. Presented here is a concise overview of the molecular adaptation mechanisms of ethanologenic bacteria in response to lignocellulose-derived inhibitory compounds. These include general stress response and tolerance mechanisms, which are typically those that maintain intracellular pH homeostasis and cell membrane integrity, activation/regulation of global stress responses and inhibitor substrate-specific degradation pathways. We anticipate that understanding these adaptation responses will be essential in the design of 'intelligent' metabolic engineering strategies for the generation of hyper-tolerant fermentation bacteria strains.

Purification and characterization of the extracellular laccase produced by Trametes polyzona WR710-1 under solid-state fermentation

Laccase from Trametes polyzona WR710-1 was produced under solid-state fermentation using the peel from the Tangerine orange (Citrus reticulata Blanco) as substrate, and purified to homogeneity. This laccase was found to be a monomeric protein with a molecular mass of about 71 kDa estimated by SDS-PAGE. The optimum pH was 2.0 for ABTS, 4.0 for L-DOPA, guaiacol, and catechol, and 5.0 for 2,6-DMP. The K(m) value of the enzyme for the substrate ABTS was 0.15 mM, its corresponding V(max) value was 1.84 mM min(-1), and the k(cat)/K(m) value was about 3960 s(-1)  mM(-1). The enzyme activity was stable between pH 6.0 and 8.0, at temperatures of up to 40 °C. The laccase was inhibited by more than 50% in the presence of 20 mM NaCl, by 95% at 5 mM of Fe(2+), and it was completely inhibited by 0.1 mM NaN(3). The N-terminal amino acid sequence of this laccase is AVTPVADLQISNAGISPDTF, which is highly similar to those of laccases from other white-rot basidiomycetes.

Engineering and production of laccase from Trametes versicolor in the yeast Yarrowia lipolytica

The lcc1 gene coding for the laccase from Trametes versicolor DSM11269 was cloned into the genome of Yarrowia lipolytica using either single or multiple integration sites. The levels of the recombinant laccase activity secreted in the culture media were 0.25 and 1 U ml(-1) for single and multiple integrations, respectively. The strain with a single integration was successfully used to express variant libraries which were screened on ABTS substrate. The strain encoding the double mutant L185P/Q214K (rM4A) showed a sixfold enhancement in secreted enzyme activity. The catalytic efficiency of the purified rM-4A laccase was respectively increased 2.4- and 2.8-fold towards ABTS and 2,6-dimethoxyphenol, compared to the rWT. Culture supernatants containing either rWT or rM-4A catalyzed the almost complete decolorization of an Amaranth solution (70 nMs(-1)). Taken together, our results open new perspectives for the use of Y. lipolytica as a molecular evolution platform to engineer laccases with improved properties.

Comparison of laccase production levels in Pichia pastoris and Cryptococcus sp. S-2

The heterologous expression of the laccase gene from Trametes versicolor and Gaeumannomyces graminis was evaluated in the yeasts Pichia pastoris and Cryptococcus sp. S-2. The expression levels of both laccase genes in Cryptococcus sp. S-2 were considerably higher than those in P. pastoris. The codon usage of Cryptococcus sp. S-2 as well as the GC content were similar to those of T. versicolor and G. graminis. These results suggest that using a host with a similar codon usage for the expressed gene may improve protein expression. The use of Cryptococcus sp. S-2 as a host may be advantageous for the heterologous expression of genes with high GC content. Moreover, this yeast provides the same advantages as P. pastoris for the production of recombinant proteins, such as growth on minimal medium, capacity for high-density growth during fermentation, and capability for post-translational modifications. Therefore, we propose that Cryptococcus sp. S-2 be used as an expression host to improve enzyme production levels when other hosts have not yielded good results.

Enhanced archaeal laccase production in recombinant Escherichia coli by modification of N-terminal propeptide and twin arginine translocation motifs

Laccases are multicopper oxidases that couple the oxidation of phenolic polymers to the reduction of molecular oxygen. While an archaeal laccase has only recently been described (LccA from the culture broth of Haloferax volcanii), this enzyme appears promising for biotechnology applications based on its robust bilirubin oxidase and laccase activities as well as its ability to withstand prolonged exposure to extreme conditions. To further optimize LccA productivity and develop an option for LccA purification from whole cells, the encoding gene was modified through deletion of the twin-arginine translocation motif and N-terminal propeptide, and the modified genes were expressed in Escherichia coli. With this approach, LccA was readily purified (overall yield up to 54 %) from the soluble fraction of E. coli as a 74-kDa monomer with syringaldazine oxidizing activity as high as 33 U mg(-1). LccA proteins prepared from H. volcanii culture broth and the soluble fraction of E. coli cells were compared by ICP-AES, EPR, DSC, CD, and UV-Vis spectroscopy and found to have a similar folding pattern with T (m) values and a rich β-sheet structure analogous to other multicopper oxidases. However, in contrast to the H. volcanii-purified LccA, which was loaded with copper, copper was not fully incorporated into the type-I Cu center of E. coli purified LccA, thus, providing insight into avenues for further optimization.

A chloride tolerant laccase from the plant pathogen ascomycete Botrytis aclada expressed at high levels in Pichia pastoris

Fungal laccases from basidiomycetous fungi are thoroughly investigated in respect of catalytic mechanism and industrial applications, but the number of reported and well characterized ascomycetous laccases is much smaller although they exhibit interesting catalytic properties. We report on a highly chloride tolerant laccase produced by the plant pathogen ascomycete Botrytis aclada, which was recombinantly expressed in Pichia pastoris with an extremely high yield and purified to homogeneity. In a fed-batch fermentation, 495 mg L(-1) of laccase was measured in the medium, which is the highest concentration obtained for a laccase by a yeast expression system. The recombinant B. aclada laccase has a typical molecular mass of 61,565 Da for the amino acid chain. The pI is approximately 2.4, a very low value for a laccase. Glycosyl residues attached to the recombinant protein make up for approximately 27% of the total protein mass. B. aclada laccase exhibits very low K(M) values and high substrate turnover numbers for phenolic and non-phenolic substrates at acidic and near neutral pH. The enzyme's stability increases in the presence of chloride ions and, even more important, its substrate turnover is only weakly inhibited by chloride ions (I(50)=1.4M), which is in sharp contrast to most other described laccases. This high chloride tolerance is mandatory for some applications such as implantable biofuel cells and laccase catalyzed reactions, which suffer from the presence of chloride ions. The high expression yield permits fast and easy production for further basic and applied research.

The Aspergillus niger multicopper oxidase family: analysis and overexpression of laccase-like encoding genes

BACKGROUND

Many filamentous fungal genomes contain complex groups of multicopper oxidase (MCO) coding genes that makes them a good source for new laccases with potential biotechnological interest. A bioinformatics analysis of the Aspergillus niger ATCC 1015 genome resulted in the identification of thirteen MCO genes. Ten of them were cloned and homologously overexpressed.

RESULTS

A bioinformatic analysis of the A. niger ATCC 1015 genome revealed the presence of 13 MCO genes belonging to three different subfamilies on the basis of their phylogenetic relationships: ascomycete laccases, fungal pigment MCOs and fungal ferroxidases. According to in silico amino acid sequence analysis, the putative genes encoding for functional extracellular laccases (mcoA, mcoB, mcoC, mcoD, mcoE, mcoF, mcoG, mcoI, mcoJ and mcoM) were placed under the control of the glaA promoter and overexpressed in A. niger N593. Enzyme activity plate assays with several common laccase substrates showed that all genes are actually expressed and code for active MCOs. Interestingly, expressed enzymes show different substrate specificities. In addition, optimization of fungal pigment MCOs extracellular production was investigated. The performance of the widely used glucoamylase signal sequence (ssGlaA) in McoA secretion was studied. Results obtained suggest that ssGlaA do not yield higher levels of secreted McoA when compared to its native secretion signal. Also, McoB synthesis was investigated using different nitrogen sources in minimal medium liquid cultures. Higher yields of extracellular McoB were achieved with (NH4)2 tartrate.

CONCLUSIONS

Aspergillus niger is a good source of new laccases. The different substrate specificity observed in plate assays makes them interesting to be purified and biochemically compared. The homologous signal sequence of McoA has been shown to be a good choice for its extracellular overexpression. From the nitrogen sources tested (NH4)2 tartrate has been found to be the most appropriate for McoB production in A. niger.

Heterologous laccase production and its role in industrial applications

Laccases are blue multicopper oxidases, catalyzing the oxidation of an array of aromatic substrates concomitantly with the reduction of molecular oxygen to water. These enzymes are implicated in a variety of biological activities. Most of the laccases studied thus far are of fungal origin. The large range of substrates oxidized by laccases has raised interest in using them within different industrial fields, such as pulp delignification, textile dye bleaching, and bioremediation. Laccases secreted from native sources are usually not suitable for large-scale purposes, mainly due to low production yields and high cost of preparation/purification procedures. Heterologous expression may provide higher enzyme yields and may permit to produce laccases with desired properties (such as different substrate specificities, or improved stabilities) for industrial applications. This review surveys researches on heterologous laccase expression focusing on the pivotal role played by recombinant systems towards the development of robust tools for greening modern industry.

Oxidation of polycyclic aromatic hydrocarbons by the bacterial laccase CueO from E. coli

Laccases produced by white rot fungi are capable of rapidly oxidizing benzo[a]pyrene. We hypothesize that the polycyclic aromatic hydrocarbon (PAH)-degrading bacteria producing laccase can enhance the degree of benzo[a]pyrene mineralization. However, fungal laccases are glycoproteins which cannot be glycosylated in bacteria, and there is no evidence to show that bacterial laccases can oxidize benzo[a]pyrene. In this study, the in vitro oxidation of PAHs by crude preparations of the bacterial laccase, CueO, from Escherichia coli was investigated. The results revealed that the crude CueO catalyzed the oxidation of anthracene and benzo[a]pyrene in the same way as the fungal laccase from Trametes versicolor, but showed specific characteristics such as thermostability and copper dependence. In the presence of 2,2'-azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid), high amounts of anthracene and benzo[a]pyrene, 80% and 97%, respectively, were transformed under optimal conditions of 60°C, pH 5, and 5 mmol l(-1) CuCl(2) after a 24-h incubation period. Other PAHs including fluorene, acenaphthylene, phenanthrene, and benzo[a]anthracene were also oxidized by the crude CueO. These findings indicated the potential application of prokaryotic laccases in enhancing the mineralization of benzo[a]pyrene by PAH-degrading bacteria.

Heterologous expression of a tannic acid-inducible laccase3 of Cryphonectria parasitica in Saccharomyces cerevisiae

Background

A tannic acid-inducible and mycoviral-regulated laccase3 (lac3) from the chestnut blight fungus Cryphonectria parasitica has recently been identified, but further characterization was hampered because of the precipitation of protein products by tannic acid supplementation. The present study investigated the heterologous expression of the functional laccase3 using a yeast Saccharomyces cerevisiae.

Results

Laccase activity in the culture broth of transformants measured using a laccase-specific substrate suggested that the lac3 gene was successfully expressed and the corresponding protein product secreted into the culture media. In addition, activity staining and Western blot analysis of a native gel revealed that the enzyme activity co-existed with the protein product specific to anti-laccase3 antibody, confirming that the cloned lac3 gene is responsible for the laccase activity. When transformants were grown on plates containing tannic acid-supplemented media, brown coloration was observed around transformed cells, indicating the oxidation of tannic acid. However, the enzymatic activity was measurable only in the selective ura^- media and was negligible in nonselective nutrient-rich culture conditions. This was in part because of the increased plasmid instability in the nonselective media. Moreover, the protein product of lac3 appears to be sensitive to the cultured nonselective nutrient-rich broth, because a rapid decline in enzymatic activity was observed when the cultured broth of ura^- media was mixed with that of nonselective nutrient-rich broth. In addition, constitutive expression of the lac3 gene resulted in a reduced cell number of the lac3 transformants compared to that of vector-only transformed control. However, the presence of recombinant vector without lac3 induction did not affect the growth of transformants.

Conclusions

The results suggest that expression of the lac3 gene has an inhibitory effect on the growth of transformed S. cerevisiae and that the controlled expression of lac3 is appropriate for the possible application of recombinant yeast to the treatment of phenolic compounds.

Cloning, microbial expression and structure-activity relationship of polyphenol oxidases from Camellia sinensis

Polyphenol oxidase (PPO) can be used for organic synthesis and degradation of wastes and dyes in industries. Lack of enzyme sources is a major barrier for its application. A PPO gene, with a full length of 1.8kb without introns, was cloned by PCR from genomic DNA of five common cultivars of Camellia sinensis. They had a 98.2-99.9% degree of identity in nucleotides and 94.7-96.1% in amino acids and encoded a polypeptide of 599 amino acids with a signal peptide targeting the chloroplast and three Cu-binding domains. The mature PPO showed high expression and enzyme activity after refolding the inclusion bodies in Escherichia coli BL21 (DE3) using pET30c expression vector, but low expression in Pichia pastoris GS115 using both the secretory and non-secretory vectors pPICZalphaA and pPICZA. The expression of PPO mutants demonstrated that the signal sequences prevented recombinant gene expression in E. coli. PPO activity was not affected by the C-terminus and was slightly inhibited by the CuC domain. Other domains were important for its activity. A 3.1-fold increase in PPO activity over non-recombinant controls was obtained by expressing the PPO fragment without signal sequences and the CuC domain in E. coli BL21 (DE3) using the pET30c vector.

Laccases: a never-ending story

Laccases (benzenediol:oxygen oxidoreductases, EC 1.10.3.2) are blue multicopper oxidases that catalyze the oxidation of an array of aromatic substrates concomitantly with the reduction of molecular oxygen to water. In fungi, laccases carry out a variety of physiological roles during their life cycle. These enzymes are being increasingly evaluated for a variety of biotechnological applications due to their broad substrate range. In this review, the most recent studies on laccase structural features and catalytic mechanisms along with analyses of their expression are reported and examined with the aim of contributing to the discussion on their structure-function relationships. Attention has also been paid to the properties of enzymes endowed with unique characteristics and to fungal laccase multigene families and their organization.

Essential role of the C-terminus in Melanocarpus albomyces laccase for enzyme production, catalytic properties and structure

The C-terminus of the fungal laccase from Melanocarpus albomyces (MaL) is processed during secretion at a processing site conserved among the ascomycete laccases. The three-dimensional structure of MaL has been solved as one of the first complete laccase structures. According to the crystal structure of MaL, the four C-terminal amino acids of the mature protein penetrate into a tunnel leading towards the trinuclear site. The C-terminal carboxylate group forms a hydrogen bond with a side chain of His140, which also coordinates to the type 3 copper. In order to analyze the role of the processed C-terminus, site-directed mutagenesis of the MaL cDNA was performed, and the mutated proteins were expressed in Trichoderma reesei and Saccharomyces cerevisiae. Changes in the C-terminus of MaL caused major defects in protein production in both expression hosts. The deletion of the last four amino acids dramatically affected the activity of the enzyme, as the deletion mutant delDSGL(559) was practically inactive. Detailed characterization of the purified L559A mutant expressed in S. cerevisiae showed the importance of the C-terminal plug for laccase activity, stability, and kinetics. Moreover, the crystal structure of the L559A mutant expressed in S. cerevisiae showed that the C-terminal mutation had clearly affected the trinuclear site geometry. The results in this study clearly confirm the critical role of the last amino acids in the C-terminus of MaL.

Biochemical and molecular genetic characterisation of a novel laccase produced by the aquatic ascomycete Phoma sp. UHH 5-1-03

A laccase from the aquatic ascomycete Phoma sp. UHH 5-1-03 (DSM 22425) was purified upon hydrophobic interaction and size exclusion chromatography (SEC). Mass spectrometric analysis of the laccase monomer yielded a molecular mass of 75.6 kDa. The enzyme possesses an unusual alkaline isoelectric point above 8.3. The Phoma sp. laccase undergoes pH-dependent dimerisation, with the dimer ( approximately 150 kDa, as assessed by SEC) predominating in a pH range of 5.0 to 8.0. The enzyme oxidises common laccase substrates still at pH 7.0 and 8.0 and is remarkably stable at these pH values. The laccase is active at high concentrations of various organic solvents, all together indicating a considerable biotechnological potential. One laccase gene (lac1) identified at the genomic DNA level and transcribed in laccase-producing cultures was completely sequenced. The deduced molecular mass of the hypothetical protein and the predicted isoelectric point of 8.1 well agree with experimentally determined data. Tryptic peptides of electrophoretically separated laccase bands were analysed by nano-liquid chromatography-tandem mass spectrometry. By using the nucleotide sequence of lac1 as a template, eight different peptides were identified and yielded an overall sequence coverage of about 18%, thus confirming the link between lac1 and the expressed laccase protein.

Molecular cloning and heterologous expression of a laccase gene from Pleurotus eryngii in free and immobilized Saccharomyces cerevisiae cells

A full length cDNA encoding an extracellular laccase was isolated by reverse transcription polymerase chain reaction from the mycelia of the mushroom Pleurotus eryngii. The isolated sequence, denoted Ery3, encodes for a mature laccase isoenzyme of 531 amino acid residues with a predicted molecular weight of 56.6 kDa. All sequence motifs, being the signature sequences used to identify the laccases, were found in the Ery3 protein sequence. The Ery3 cDNA was expressed in Saccharomyces cerevisiae and the effects of copper concentration and cultivation temperature were investigated. S. cerevisiae cells were immobilized in calcium alginate gel and the optimal immobilization parameters for the enhanced production of laccase were determined. The immobilization was most effective with 3% sodium alginate, 0.1 M calcium chloride and an initial biomass of 4.5 x 10(8) cells. The enzyme yield obtained with immobilized cells (139 mU ml(-1)) showed a 1.6-fold increase compared to the highest yield obtained with free cells. The alginate beads showed good stability and retained 84% capacity of enzyme production after seven repeated cycles of batch fermentation. The immobilization system proved to increase the proteolytic stability of the recombinant Ery3 protein. To our knowledge, this is the first report on S. cerevisiae whole-cell immobilization for recombinant laccase production.

"Blue" laccases

This review concerns copper-containing oxidases--laccases. Principal biochemical and electrochemical properties of laccases isolated from different sources are described, as well as their structure and mechanism of catalysis. Possible applications of laccases in different fields of biotechnology are discussed.

Heterologous expression of heterodimeric laccase from Pleurotus ostreatus in Kluyveromyces lactis

Among the laccases produced by the white-rot fungus Pleurotus ostreatus, there are two closely related atypical isoenzymes, POXA3a and POXA3b. These isoenzymes are endowed with quaternary structure, consisting of two subunits very different in size. The POXA3 large subunit is clearly homologous to other known laccases, while the small subunit does not show significant homology with any protein in data banks. To investigate on the singular structure of the POXA3 complex, a new system for recombinant expression of heterodimer proteins in the yeast Kluyveromyces lactis has been set up. A unique expression vector has been used and the cDNAs encoding the two subunits have been cloned under the control of the same bi-directionally acting promoter. Expression of the large subunit alone and co-expression of both subunits in the same host have been demonstrated and the properties of the recombinant proteins have been compared. Clones expressing the large subunit alone exhibited always notably lower activity than those expressing both subunits. In addition to the activity increase, the presence of the small subunit led to a significant increase of laccase stability. Therefore, a role of the small subunit in POXA3 stabilisation is suggested.

Laccase production at reactor scale by filamentous fungi

Laccases have received much attention from researchers during the past decades due to their broad substrate specificity and to the fact that they use molecular oxygen as the final electron acceptor instead of hydrogen peroxide as used by peroxidases. This makes laccases highly interesting for a wide variety of processes, such as textile dye decolouration, pulp bleaching, effluent detoxification, biosensors and bioremediation. The successful application of laccases to the above-mentioned processes requires the production of large quantities of enzyme at low cost. Filamentous fungi are able to produce laccases in high amounts, however, an efficient production system at bioreactor scale is still lacking. This is mainly due to the fact that laccase production by wild-type strains of filamentous fungi is linked to secondary metabolism, which implies that the following drawbacks must be overcome: uncontrolled fungal growth, the formation of polysaccharides around mycelia and the secretion of certain compounds (i.e. proteases) that inactivate laccases. This review summarizes the current status of laccase production by wild-type strains of filamentous fungi at the bioreactor scale.