Expression of 3-ketoacyl-acyl carrier protein reductase (fabG) genes enhances production of polyhydroxyalkanoate copolymer from glucose in recombinant Escherichia coli JM109

Genetic characterization of a novel Salinicola salarius isolate applied for the bioconversion of agro-industrial wastes into polyhydroxybutyrate

BACKGROUND

Polyhydroxybutyrate (PHB) has emerged as a promising eco-friendly alternative to traditional petrochemical-based plastics. In the present study, we isolated and characterized a new strain of Salinicola salarius, a halophilic bacterium, from the New Suez Canal in Egypt and characterized exclusively as a potential PHB producer. Further genome analysis of the isolated strain, ES021, was conducted to identify and elucidate the genes involved in PHB production.

RESULTS

Different PHB-producing marine bacteria were isolated from the New Suez Canal and characterized as PHB producers. Among the 17 bacterial isolates, Salinicola salarius ES021 strain showed the capability to accumulate the highest amount of PHB. Whole genome analysis was implemented to identify the PHB-related genes in Salinicola salarius ES021 strain. Putative genes were identified that can function as phaCAB genes to produce PHB in this strain. These genes include fadA, fabG, and P3W43_16340 (encoding acyl-CoA thioesterase II) for PHB production from glucose. Additionally, phaJ and fadB were identified as key genes involved in PHB production from fatty acids. Optimization of environmental factors such as shaking rate and incubation temperature, resulted in the highest PHB productivity when growing Salinicola salarius ES021 strain at 30°C on a shaker incubator (110 rpm) for 48 h. To maximize PHB production economically, different raw materials i.e., salted whey and sugarcane molasses were examined as cost-effective carbon sources. The PHB productivity increased two-fold (13.34 g/L) when using molasses (5% sucrose) as a fermentation media. This molasses medium was used to upscale PHB production in a 20 L stirred-tank bioreactor yielding a biomass of 25.12 g/L, and PHB of 12.88 g/L. Furthermore, the produced polymer was confirmed as PHB using Fourier-transform infrared spectroscopy (FTIR), gas chromatography-mass spectroscopy (GC-MS), and nuclear magnetic resonance spectroscopy (NMR) analyses.

CONCLUSIONS

Herein, Salinicola salarius ES021 strain was demonstrated as a robust natural producer of PHB from agro-industrial wastes. The detailed genome characterization of the ES021 strain presented in this study identifies potential PHB-related genes. However, further metabolic engineering is warranted to confirm the gene networks required for PHB production in this strain. Overall, this study contributes to the development of sustainable and cost-effective PHB production strategies.

Genome-Wide Metabolic Reconstruction of the Synthesis of Polyhydroxyalkanoates from Sugars and Fatty Acids by Burkholderia Sensu Lato Species

Burkholderia sensu lato (s.l.) species have a versatile metabolism. The aims of this review are the genomic reconstruction of the metabolic pathways involved in the synthesis of polyhydroxyalkanoates (PHAs) by Burkholderia s.l. genera, and the characterization of the PHA synthases and the pha genes organization. The reports of the PHA synthesis from different substrates by Burkholderia s.l. strains were reviewed. Genome-guided metabolic reconstruction involving the conversion of sugars and fatty acids into PHAs by 37 Burkholderia s.l. species was performed. Sugars are metabolized via the Entner-Doudoroff (ED), pentose-phosphate (PP), and lower Embden-Meyerhoff-Parnas (EMP) pathways, which produce reducing power through NAD(P)H synthesis and PHA precursors. Fatty acid substrates are metabolized via β-oxidation and de novo synthesis of fatty acids into PHAs. The analysis of 194 Burkholderia s.l. genomes revealed that all strains have the phaC, phaA, and phaB genes for PHA synthesis, wherein the phaC gene is generally present in ≥2 copies. PHA synthases were classified into four phylogenetic groups belonging to class I II and III PHA synthases and one outlier group. The reconstruction of PHAs synthesis revealed a high level of gene redundancy probably reflecting complex regulatory layers that provide fine tuning according to diverse substrates and physiological conditions.

Polyhydroxyalkanoates: Next generation natural biomolecules and a solution for the world's future economy

Petrochemical plastics have become a cause of pollution for decades and finding alternative plastics that are environmental friendly. Polyhydroxyalkanoate (PHA), a biopolyester produced by microbial cells, has characteristics (biocompatible, biodegradable, non-toxic) that make it appropriate as a biodegradable plastic substance. The different forms of PHA make it suitable to a wide choice of products, from packaging materials to biomedical applications. The major challenge in commercialization of PHA is the cost of manufacturing. There are a lot of factors that could affect the efficiency of a development method. The development of new strategic parameters for better synthesis, including consumption of low cost carbon substrates, genetic modification of PHA-producing strains, and fermentational strategies are discussed. Recently, many efforts have been made to develop a method for the cost-effective production of PHAs. The isolation, analysis as well as characterization of PHAs are significant factors for any developmental process. Due to the biodegradable and biocompatible properties of PHAs, they are majorly used in biomedical applications such as vascular grafting, heart tissue engineering, skin tissue repairing, liver tissue engineering, nerve tissue engineering, bone tissue engineering, cartilage tissue engineering and therapeutic carrier. The emerging and interesting area of research is the development of self-healing biopolymer that could significantly broaden the operational life and protection of the polymeric materials for a broad range of uses. Biodegradable and biocompatible polymers are considered as the green materials in place of petroleum-based plastics in the future.

Optimization and Characterization of PHA (SCL-SCL) Copolymer by Indigenous Bacillus thuringiensis A102 Strain for Biomedical Applications

PHA is one of the leading commercially important bio-polyesteric compounds piled up as an intracellular lipid-based energy storage compound by numerous microorganisms. An indigenous Gram-positive bacterium isolated from fire ant (Solenopsis invicta) has known to potentially accumulate PHA. Various nutritional elements like carbon, nitrogen, phosphate and C/N ratio were optimized. The indigenous B.t.A102 strain grown in optimized RC medium yielded PHA of about 3.25 g/L. The extracted polymer was characterized by NMR, GC-MS, X-ray diffraction and thermal analysis via TGA & DTA. The characterized PHA was used to prepare scaffold using the solvent casting method. The non-toxic nature of the composite material was evaluated on NIH/3T3 fibroblast cell lines using different staining (like Giemsa staining, AO/EB dual staining, neutral red staining) techniques and cell viability assay. This paper dealt with the optimization of the media components that increase PHA production and primary in vitro testing for its possible application as wound dressing materials.

Microbial Polyhydroxyalkanoates and Nonnatural Polyesters

Microorganisms produce diverse polymers for various purposes such as storing genetic information, energy, and reducing power, and serving as structural materials and scaffolds. Among these polymers, polyhydroxyalkanoates (PHAs) are microbial polyesters synthesized and accumulated intracellularly as a storage material of carbon, energy, and reducing power under unfavorable growth conditions in the presence of excess carbon source. PHAs have attracted considerable attention for their wide range of applications in industrial and medical fields. Since the first discovery of PHA accumulating bacteria about 100 years ago, remarkable advances have been made in the understanding of PHA biosynthesis and metabolic engineering of microorganisms toward developing efficient PHA producers. Recently, nonnatural polyesters have also been synthesized by metabolically engineered microorganisms, which opened a new avenue toward sustainable production of more diverse plastics. Herein, the current state of PHAs and nonnatural polyesters is reviewed, covering mechanisms of microbial polyester biosynthesis, metabolic pathways, and enzymes involved in biosynthesis of short-chain-length PHAs, medium-chain-length PHAs, and nonnatural polyesters, especially 2-hydroxyacid-containing polyesters, metabolic engineering strategies to produce novel polymers and enhance production capabilities and fermentation, and downstream processing strategies for cost-effective production of these microbial polyesters. In addition, the applications of PHAs and prospects are discussed.

Industrial Production of Poly-β-hydroxybutyrate from CO2: Can Cyanobacteria Meet this Challenge?

The increasing impact of plastic materials on the environment is a growing global concern. In regards to this circumstance, it is a major challenge to find new sources for the production of bioplastics. Poly-β-hydroxybutyrate (PHB) is characterized by interesting features that draw attention for research and commercial ventures. Indeed, PHB is eco-friendly, biodegradable, and biocompatible. Bacterial fermentation processes are a known route to produce PHB. However, the production of PHB through the chemoheterotrophic bacterial system is very expensive due to the high costs of the carbon source for the growth of the organism. On the contrary, the production of PHB through the photoautotrophic cyanobacterium system is considered an attractive alternative for a low-cost PHB production because of the inexpensive feedstock (CO2 and light). This paper regards the evaluation of four independent strategies to improve the PHB production by cyanobacteria: (i) the design of the medium; (ii) the genetic engineering to improve the PHB accumulation; (iii) the development of robust models as a tool to identify the bottleneck(s) of the PHB production to maximize the production; and (iv) the continuous operation mode in a photobioreactor for PHB production. The synergic effect of these strategies could address the design of the optimal PHB production process by cyanobacteria. A further limitation for the commercial production of PHB via the biotechnological route are the high costs related to the recovery of PHB granules. Therefore, a further challenge is to select a low-cost and environmentally friendly process to recover PHB from cyanobacteria.

FabG can function as PhaB for poly-3-hydroxybutyrate biosynthesis in photosynthetic cyanobacteria Synechocystis sp. PCC 6803

The production of poly-3-hydroxybutyrate (PHB) by photosynthetic cyanobacteria is a potentially sustainable production method for the biodegradable plastics industry. β-Ketoacyl-ACP reductase (FabG), from the photosynthetic cyanobacterium Synechocystis sp. PCC 6803 (SpFabG), is the first NADPH-dependent reductase in the fatty acid biosynthesis pathway. Its structure is similar to that of acetoacetyl-CoA reductase (SpPhaB), which is critical for PHB synthesis and can replace SpPhaB for acetoacetyl-CoA reduction in vitro. However, the specific function of SpFabG in fatty acid synthesis and whether SpFabG could participate in PHB synthesis in vivo were not yet clear. In this study, the role of SpFabG in fatty acid synthesis was first verified in vivo by knocking down and overexpressing of fabG. It was shown that SpFabG was essential yet not rate-limiting for fatty acid biosynthesis. The biochemical characterization of SpFabG using acetoacetyl-CoA as the substrate showed that the optimum temperature, optimum pH, K_m and k_cat were 30°C, 7, 2.30 mM, and 19.85 s^-1, respectively, which exemplified the ability of SpFabG to reduce acetoacetyl-CoA with a relatively low affinity and weak catalytic efficiency. Functional analysis of SpFabG in vivo indicated that SpFabG was able to partially complement SpPhaB under nitrogen-deprived conditions, and overexpression of fabG led to the diversion of partial carbon flux from fatty acid toward PHB synthesis.

Metagenomic and metaproteomic analyses of Accumulibacter phosphatis-enriched floccular and granular biofilm

Biofilms are ubiquitous in nature, forming diverse adherent microbial communities that perform a plethora of functions. Here we operated two laboratory-scale sequencing batch reactors enriched with Candidatus Accumulibacter phosphatis (Accumulibacter) performing enhanced biological phosphorus removal. Reactors formed two distinct biofilms, one floccular biofilm, consisting of small, loose, microbial aggregates, and one granular biofilm, forming larger, dense, spherical aggregates. Using metagenomic and metaproteomic methods, we investigated the proteomic differences between these two biofilm communities, identifying a total of 2022 unique proteins. To understand biofilm differences, we compared protein abundances that were statistically enriched in both biofilm states. Floccular biofilms were enriched with pathogenic secretion systems suggesting a highly competitive microbial community. Comparatively, granular biofilms revealed a high-stress environment with evidence of nutrient starvation, phage predation pressure, and increased extracellular polymeric substance and cell lysis. Granular biofilms were enriched in outer membrane transport proteins to scavenge the extracellular milieu for amino acids and other metabolites, likely released through cell lysis, to supplement metabolic pathways. This study provides the first detailed proteomic comparison between Accumulibacter-enriched floccular and granular biofilm communities, proposes a conceptual model for the granule biofilm, and offers novel insights into granule biofilm formation and stability.

Mining and identification of polyunsaturated fatty acid synthesis genes active during camelina seed development using 454 pyrosequencing

BACKGROUND

Camelina (Camelina sativa L.) is well known for its high unsaturated fatty acid content and great resistance to environmental stress. However, little is known about the molecular mechanisms of unsaturated fatty acid biosynthesis in this annual oilseed crop. To gain greater insight into this mechanism, the transcriptome profiles of seeds at different developmental stages were analyzed by 454 pyrosequencing.

RESULTS

Sequencing of two normalized 454 libraries produced 831,632 clean reads. A total of 32,759 unigenes with an average length of 642 bp were obtained by de novo assembly, and 12,476 up-regulated and 12,390 down-regulated unigenes were identified in the 20 DAF (days after flowering) library compared with the 10 DAF library. Functional annotations showed that 220 genes annotated as fatty acid biosynthesis genes were up-regulated in 20 DAF sample. Among them, 47 candidate unigenes were characterized as responsible for polyunsaturated fatty acid synthesis. To verify unigene expression levels calculated from the transcriptome analysis results, quantitative real-time PCR was performed on 11 randomly selected genes from the 220 up-regulated genes; 10 showed consistency between qRT-PCR and 454 pyrosequencing results.

CONCLUSIONS

Investigation of gene expression levels revealed 32,759 genes involved in seed development, many of which showed significant changes in the 20 DAF sample compared with the 10 DAF sample. Our 454 pyrosequencing data for the camelina transcriptome provide an insight into the molecular mechanisms and regulatory pathways of polyunsaturated fatty acid biosynthesis in camelina. The genes characterized in our research will provide candidate genes for the genetic modification of crops.

Using modern tools to probe the structure-function relationship of fatty acid synthases

Fatty acid biosynthesis is essential to life and represents one of the most conserved pathways in nature, preserving the same handful of chemical reactions across all species. Recent interest in the molecular details of the de novo fatty acid synthase (FAS) has been heightened by demand for renewable fuels and the emergence of multidrug-resistant bacterial strains. Central to FAS is the acyl carrier protein (ACP), a protein chaperone that shuttles the growing acyl chain between catalytic enzymes within the FAS. Human efforts to alter fatty acid biosynthesis for oil production, chemical feedstock, or antimicrobial purposes has been met with limited success, due in part to a lack of detailed molecular information behind the ACP-partner protein interactions inherent to the pathway. This review will focus on recently developed tools for the modification of ACP and analysis of protein-protein interactions, such as mechanism-based crosslinking, and the studies exploiting them. Discussion specific to each enzymatic domain will focus first on mechanism and known inhibitors, followed by available structures and known interactions with ACP. Although significant unknowns remain, new understandings of the intricacies of FAS point to future advances in manipulating this complex molecular factory.

Smart polyhydroxyalkanoate nanobeads by protein based functionalization

The development of innovative medicines and personalized biomedical approaches calls for new generation easily tunable biomaterials that can be manufactured applying straightforward and low-priced technologies. Production of functionalized bacterial polyhydroxyalkanoate (PHA) nanobeads by harnessing their natural carbon-storage granule production system is a thrilling recent development. This branch of nanobiotechnology employs proteins intrinsically binding the PHA granules as tags to immobilize recombinant proteins of interest and design functional nanocarriers for wide range of applications. Additionally, the implementation of new methodological platforms regarding production of endotoxin free PHA nanobeads using Gram-positive bacteria opened new avenues for biomedical applications. This prompts serious considerations of possible exploitation of bacterial cell factories as alternatives to traditional chemical synthesis and sources of novel bioproducts that could dramatically expand possible applications of biopolymers.

From the Clinical Editor

In the 21st century, we are coming into the age of personalized medicine. There is a growing use of biomaterials in the clinical setting. In this review article, the authors describe the use of natural polyhydroxyalkanoate (PHA) nanoparticulates, which are formed within bacterial cells and can be easily functionalized. The potential uses would include high-affinity bioseparation, enzyme immobilization, protein delivery, diagnostics etc. The challenges of this approach remain the possible toxicity from endotoxin and the high cost of production.

Improved artificial pathway for biosynthesis of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) with high C6-monomer composition from fructose in Ralstonia eutropha

Poly((R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate) [P(3HB-co-3HHx)], a flexible and practical kind of polyhydroxyalkanoates, is generally produced from plant oils and fatty acids by several wild and recombinant bacteria. This study established an improved artificial pathway for the biosynthesis of P(3HB-co-3HHx) with high 3HHx composition from structurally unrelated fructose in Ralstonia eutropha. Depression of (R)-specific reduction of acetoacetyl-CoA by the deletion of phaB1 was an effective modification for formation of the C6-monomer unit from fructose driven by crotonyl-CoA carboxylase/reductase (Ccr). Co-overexpression of phaJ4a, which encodes medium-chain-length (R)-enoyl-CoA hydratase, with ccr promoted the incorporation of both 3HB and 3HHx units. Further introduction of emdMm, a synthetic gene encoding ethylmalonyl-CoA decarboxylase derived from mouse, was remarkably effective for P(3HB-co-3HHx) biosynthesis, probably by converting ethylmalonyl-CoA generated by the reductive carboxylase activity of Ccr back into butyryl-CoA. A high cellular content of P(3HB-co-3HHx) composed of 22mol% 3HHx could be produced from fructose by the engineered strain of R. eutropha with ΔphaB1 genotype expressing ccr, phaJ4a, and emd.

Construction and characterization of tetH overexpression and knockout strains of Acidithiobacillus ferrooxidans

Acidithiobacillus ferrooxidans is a major participant in consortia of microorganisms used for bioleaching. It can obtain energy from the oxidation of Fe(2+), H2, S(0), and various reduced inorganic sulfur compounds (RISCs). Tetrathionate is a key intermediate during RISC oxidation, hydrolyzed by tetrathionate hydrolase (TetH), and used as sole energy source. In this study, a tetH knockout (ΔtetH) mutant and a tetH overexpression strain were constructed and characterized. The tetH overexpression strain grew better on sulfur and tetrathionate and possessed a higher rate of tetrathionate utilization and TetH activity than the wild type. However, its cell yields on tetrathionate were much lower than those on sulfur. The ΔtetH mutant could not grow on tetrathionate but could proliferate on sulfur with a lower cell yield than the wild type's, which indicated that tetrathionate hydrolysis is mediated only by TetH, encoded by tetH. The ΔtetH mutant could survive in ferrous medium with an Fe(2+) oxidation rate similar to that of the wild type. For the tetH overexpression strain, the rate was relatively higher than that of the wild type. The reverse transcription-quantitative PCR (qRT-PCR) results showed that tetH and doxD2 acted synergistically, and doxD2 was considered important in thiosulfate metabolism. Of the two sqr genes, AFE_0267 seemed to play as important a role in sulfide oxidation as AFE_1792. This study not only provides a substantial basis for studying the function of the tetH gene but also may serve as a model to clarify other candidate genes involved in sulfur oxidation in this organism.

Synthesis of polyhydroxyalkanoates from glucose that contain medium-chain-length monomers via the reversed fatty acid β-oxidation cycle in Escherichia coli

Polyhydroxyalkanoates that contain the medium-chain-length monomers (mcl-PHAs) have a wide range of applications owing to their superior physical and mechanical properties. A challenge to synthesize such mcl-PHAs from unrelated and renewable sources is exploiting the efficient metabolic pathways that lead to the formation of precursor (R)-3-hydroxyacyl-CoA. Here, by engineering the reversed fatty acid β-oxidation cycle, we were able to synthesize mcl-PHAs in Escherichia coli directly from glucose. After deletion of the major thioesterases, the engineered E. coli produced 6.62wt% of cell dry weight mcl-PHA heteropolymers. Furthermore, when a low-substrate-specificity PHA synthase from Pseudomonas stutzeri 1317 was employed, recombinant E. coli synthesized 12.10wt% of cell dry weight scl-mcl PHA copolymers, of which 21.18mol% was 3-hydroxybutyrate and 78.82mol% was medium-chain-length monomers. The reversed fatty acid β-oxidation cycle offered an efficient metabolic pathway for mcl-PHA biosynthesis in E. coli and can be further optimized.

Fatty acid synthesis in Escherichia coli and its applications towards the production of fatty acid based biofuels

The idea of renewable and regenerative resources has inspired research for more than a hundred years. Ideally, the only spent energy will replenish itself, like plant material, sunlight, thermal energy or wind. Biodiesel or ethanol are examples, since their production relies mainly on plant material. However, it has become apparent that crop derived biofuels will not be sufficient to satisfy future energy demands. Thus, especially in the last decade a lot of research has focused on the production of next generation biofuels. A major subject of these investigations has been the microbial fatty acid biosynthesis with the aim to produce fatty acids or derivatives for substitution of diesel. As an industrially important organism and with the best studied microbial fatty acid biosynthesis, Escherichia coli has been chosen as producer in many of these studies and several reviews have been published in the fields of E. coli fatty acid biosynthesis or biofuels. However, most reviews discuss only one of these topics in detail, despite the fact, that a profound understanding of the involved enzymes and their regulation is necessary for efficient genetic engineering of the entire pathway. The first part of this review aims at summarizing the knowledge about fatty acid biosynthesis of E. coli and its regulation, and it provides the connection towards the production of fatty acids and related biofuels. The second part gives an overview about the achievements by genetic engineering of the fatty acid biosynthesis towards the production of next generation biofuels. Finally, the actual importance and potential of fatty acid-based biofuels will be discussed.

Modification of β-oxidation pathway in Ralstonia eutropha for production of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) from soybean oil

Ralstonia eutropha H16 is a useful platform for metabolic engineering aiming at efficient production of polyhydroxyalkanaotes being attracted as practical bioplastics. This study focused on bifunctional (S)-specific 2-enoyl-CoA hydratase/(S)-3-hydroxyacyl-CoA dehydrogenase encoded by fadB to obtain information regarding β-oxidation in this bacterium and to achieve compositional regulation of poly((R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate) [P(3HB-co-3HHx)] synthesized from soybean oil. In addition to two FadB homologs (FadB1 and FadB') encoded within the previously identified β-oxidation gene clusters on the chromosome 1, a gene of third homolog (FadB2) was found on chromosome 2 of R. eutropha. The fadB homologs were disrupted in R. eutropha strain NSDG expressing a mutant gene of PHA synthase from Aeromonas caviae. The gene disruptions affected neither growth nor PHA production on fructose. On soybean oil, fadB' deletion led to reduction of PHA quantity attributed to decrease of 3HB unit, while fadB1 deletion slightly increased 3HHx composition without serious negative impact on both cell growth and PHA biosynthesis. Double deletion of fadB1 and fadB' significantly impaired the cell growth and PHA biosynthesis, indicating the major roles of fadB1 and fadB' in β-oxidation. When fadB1 was deleted in several engineered strains of R. eutropha possessing additional (R)-enoyl-CoA hydratase gene(s), the net amounts of 3HHx unit in the PHA fractions showed 6-21% increase probably due to slightly enhanced supply of medium-chain-length 2-enoyl-CoAs through the partially impaired β-oxidation. These results demonstrated that modification of β-oxidation by fadB1 deletion was effective for increasing 3HHx composition in the copolyesters produced from soybean oil.

Development of a markerless gene replacement system for Acidithiobacillus ferrooxidans and construction of a pfkB mutant

The extremely acidophilic, chemolithoautotrophic Acidithiobacillus ferrooxidans is an important bioleaching bacterium of great value in the metallurgical industry and environmental protection. In this report, a mutagenesis system based on the homing endonuclease I-SceI was developed to produce targeted, unmarked gene deletions in the strain A. ferrooxidans ATCC 23270. A targeted phosphofructokinase (PFK) gene (pfkB) mutant of A. ferrooxidans ATCC 23270 was constructed by homologous recombination and identified by PCR with specific primers as well as Southern blot analysis. This potential pfkB gene (AFE_1807) was also characterized by expression in PFK-deficient Escherichia coli cells, and heteroexpression of the PFKB protein demonstrated that it had functional PFK activity, though it was significantly lower (about 800-fold) than that of phosphofructokinase-2 (PFK-B) expressed by the pfkB gene from E. coli K-12. The function of the potential PFKB protein in A. ferrooxidans was demonstrated by comparing the properties of the pfkB mutant with those of the wild type. The pfkB mutant strain displayed a relatively reduced growth capacity in S(0) medium (0.5% [wt/vol] elemental sulfur in 9K basal salts solution adjusted to pH 3.0 with H(2)SO(4)), but the mutation did not completely prevent A. ferrooxidans from assimilating exogenous glucose. The transcriptional analysis of some related genes in central carbohydrate metabolism in the wild-type and mutant strains with or without supplementation of glucose was carried out by quantitative reverse transcription-PCR. This report suggests that the markerless mutagenesis strategy could serve as a model for functional studies of other genes of interest from A. ferrooxidans and multiple mutations could be made in a single A. ferrooxidans strain.

Development of a new strategy for production of medium-chain-length polyhydroxyalkanoates by recombinant Escherichia coli via inexpensive non-fatty acid feedstocks

Pseudomonas putida KT2440 is capable of producing medium-chain-length polyhydroxyalkanoates (MCL-PHAs) when grown on unrelated carbon sources during nutrient limitation. Transcription levels of genes putatively involved in PHA biosynthesis were assessed by quantitative real-time PCR (qRT-PCR) in P. putida grown on glycerol as a sole carbon source. The results showed that two genes, phaG and the PP0763 gene, were highly upregulated among genes potentially involved in the biosynthesis of MCL-PHAs from unrelated carbon sources. Previous studies have described phaG as a 3-hydroxyacyl-acyl carrier protein (ACP)-coenzyme A (CoA) transferase, and based on homology, the PP0763 gene was predicted to encode a medium-chain-fatty-acid CoA ligase. High expression levels of these genes during PHA production in P. putida led to the hypothesis that these two genes are involved in PHA biosynthesis from non-fatty acid carbon sources, such as glucose and glycerol. The phaG(pp) and PP0763 genes from P. putida were cloned and coexpressed with the engineered Pseudomonas sp. 61-3 PHA synthase gene phaCl (STQK)(ps) in recombinant Escherichia coli. Up to 400 mg liter(-1) MCL-PHAs was successfully produced from glucose. This study has produced the largest amount of MCL-PHAs reported from non-fatty acid carbon sources in recombinant E. coli to date and opens up the possibility of using inexpensive feedstocks to produce MCL-PHA polymers.

Production and characterization of PHA from recombinant E. coli harbouring phaC1 gene of indigenous Pseudomonas sp. LDC-5 using molasses

Polyhydroxyalkanoates (PHA) are biodegradable and biocompatible green thermoplastics, synthesized by wide variety of bacteria as an intracellular carbon and energy storage intermediate. They are used as an alternative to nonrenewable petroleum derived plastics. The current interest in these biopolyesters is stimulated by the search for cost-effective capitalized production. This paper attempts to achieve maximized production rate from recombinant system using inexpensive substrate. Molasses from agro-industrial waste was used to produce PHA from recombinant E.coli in batch culture. PHA yield in molasses (3.06g/L ± 0.05‒75.5%) was higher than that of sucrose (2.5g/L ± 0.05 - 65.1%). Properties of the polymer produced from molasses and sucrose were analyzed by DSC, TGA, DTA, GC/MS, TLC and optical rotation studies. The findings suggested that molasses enhanced PHA production in recombinant E.coli.

Roles of multiple acetoacetyl coenzyme A reductases in polyhydroxybutyrate biosynthesis in Ralstonia eutropha H16

The bacterium Ralstonia eutropha H16 synthesizes polyhydroxybutyrate (PHB) from acetyl coenzyme A (acetyl-CoA) through reactions catalyzed by a β-ketothiolase (PhaA), an acetoacetyl-CoA reductase (PhaB), and a polyhydroxyalkanoate synthase (PhaC). An operon of three genes encoding these enzymatic steps was discovered in R. eutropha and has been well studied. Sequencing and analysis of the R. eutropha genome revealed putative isologs for each of the PHB biosynthetic genes, many of which had never been characterized. In addition to the previously identified phaB1 gene, the genome contains the isologs phaB2 and phaB3 as well as 15 other potential acetoacetyl-CoA reductases. We have investigated the roles of the three phaB isologs by deleting them from the genome individually and in combination. It was discovered that the gene products of both phaB1 and phaB3 contribute to PHB biosynthesis in fructose minimal medium but that in plant oil minimal medium and rich medium, phaB3 seems to be unexpressed. This raises interesting questions concerning the regulation of phaB3 expression. Deletion of the gene phaB2 did not result in an observable phenotype under the conditions tested, although this gene does encode an active reductase. Addition of the individual reductase genes to the genome of the ΔphaB1 ΔphaB2 ΔphaB3 strain restored PHB production, and in the course of our complementation experiments, we serendipitously created a PHB-hyperproducing mutant. Measurement of the PhaB and PhaA activities of the mutant strains indicated that the thiolase reaction is the limiting step in PHB biosynthesis in R. eutropha H16 during nitrogen-limited growth on fructose.

Identification of the polyhydroxyalkanoate (PHA)-specific acetoacetyl coenzyme A reductase among multiple FabG paralogs in Haloarcula hispanica and reconstruction of the PHA biosynthetic pathway in Haloferax volcanii

Genome-wide analysis has revealed abundant FabG (beta-ketoacyl-ACP reductase) paralogs, with uncharacterized biological functions, in several halophilic archaea. In this study, we identified for the first time that the fabG1 gene, but not the other five fabG paralogs, encodes the polyhydroxyalkanoate (PHA)-specific acetoacetyl coenzyme A (acetoacetyl-CoA) reductase in Haloarcula hispanica. Although all of the paralogous fabG genes were actively transcribed, only disruption or knockout of fabG1 abolished PHA synthesis, and complementation of the DeltafabG1 mutant with the fabG1 gene restored both PHA synthesis capability and the NADPH-dependent acetoacetyl-CoA reductase activity. In addition, heterologous coexpression of the PHA synthase genes (phaEC) together with fabG1, but not its five paralogs, reconstructed the PHA biosynthetic pathway in Haloferax volcanii, a PHA-defective haloarchaeon. Taken together, our results indicate that FabG1 in H. hispanica, and possibly its counterpart in Haloarcula marismortui, has evolved the distinct function of supplying precursors for PHA biosynthesis, like PhaB in bacteria. Hence, we suggest the renaming of FabG1 in both genomes as PhaB, the PHA-specific acetoacetyl-CoA reductase of halophilic archaea.

Community structure evolution and enrichment of glycogen-accumulating organisms producing polyhydroxyalkanoates from fermented molasses

An open mixed culture was enriched with glycogen-accumulating organisms (GAOs) by using a sequencing batch reactor and treating an agroindustrial waste (sugar cane molasses) under cyclic anaerobic-aerobic conditions. Over a 1-year operating period, the culture exhibited a very stable GAO phenotype with an average polyhydroxyalkanoate (PHA) content of 17% total suspended solids. However, the GAO microbial community evolved over the course of operation to a culture exhibiting unusual characteristics in producing PHAs comprised of short-chain-length monomers, namely, 3-hydroxybutyrate, 3-hydroxy-2-methylbutyrate, 3-hydroxyvalerate, and 3-hydroxy-2-methylvalerate, and also, up to 31 mol% of the medium-chain-length (MCL) monomer 3-hydroxyhexanoate (3HHx). Microbial community analysis by fluorescence in situ hybridization revealed a concurrent long-term drift in the GAO community balance, from mainly "Candidatus Competibacter phosphatis" to mainly Defluviicoccus vanus-related organisms. The production of 3HHx was confirmed by (13)C nuclear magnetic resonance (NMR) and appeared to be related to the increased presence of D. vanus-related GAOs. These results suggest a broadened spectrum of material, chemical, and mechanical properties that can be achieved for biopolymers produced by open mixed cultures from fermented waste. The increased spectrum of polymer properties brings a wider scope of potential applications.

Enhanced production of SCL-LCL-PHA co-polymer by sludge-isolated Pseudomonas aeruginosa MTCC 7925

AIM

To boost short-chain-length-long-chain-length polyhydroxyalkanoate (SCL-LCL-PHA) co-polymer yield in Pseudomonas aeruginosa MTCC 7925 by manipulating culture conditions.

METHODS AND RESULTS

Stationary phase culture of P. aeruginosa MTCC 7925 was subjected to various doses of different carbons and, N and P deficiencies. Enhanced co-polymer yield was recorded under ethanol- and glucose-supplemented cultures. Interaction of ethanol with N-deficiency boosted co-polymer accumulation maximally.

CONCLUSIONS

The sludge-isolated P. aeruginosa MTCC 7925 demonstrated good capability to synthesize SCL-LCL-PHA co-polymer from unrelated carbon sources. Supplementation of ethanol under N-deficiency boosted the co-polymer yield up to 69% of dry cell weight, which is significantly higher when compared with other SCL-MCL-PHA co-polymer accumulating bacterial species.

SIGNIFICANCE AND IMPORTANCE OF THE STUDY

This is the first report on P. aeruginosa MTCC 7925, which is capable of accumulating LCL 3-hydroxyhexadecanoate and 3-hydroxyoctadecanoate units with SCL 3-hydroxybutyrate and 3-hydroxyvalerate as constituents of PHAs. This opens up new possibilities for various industrial applications owing to the superior properties of this new co-polymer.

The production of polyhydroxyalkanoates in recombinant Escherichia coli

Polyhydroxyalkanoates, the natural polyester that many microorganisms accumulate to store carbon and reducing equivalents, have been considered as a future alternative of traditional plastic due to their special properties. In Escherichia coli, a previous non-polyhydroxyalkanoates producer, pathway engineering has been developed as a very powerful approach to set up microbial production process through the introduction of direct genetic changes by recombinant DNA technology. Various metabolic pathways leading to the polyhydroxyalkanoates accumulation with desirable properties at low-cost and high-productivity have been developed. At the same time, high density fermentation technology of E. coli provides an efficient polyhydroxyalkanoates production strategy. This review focused on metabolic engineering, fermentation and downstream process aiming to polyhydroxyalkanoates production in E. coli.

Molecular characterization of Pseudomonas sp. LDC-5 involved in accumulation of poly 3-hydroxybutyrate and medium-chain-length poly 3-hydroxyalkanoates

Polyhydroxyalkanoates (PHAs) are biological polyesters, of which, Short-Chain-Length-Medium-Chain-Length (SCL-MCL) PHA copolymers are important because of their wide range of applications. The present study focused on molecular characterization of Pseudomonas sp. LDC-5 that is identified as SCL-MCL producer. Phase contrast, fluorescent and electron microscopic observation confirmed the presence of PHA granules in Pseudomonas sp. LDC-5. PCR analysis indicated the presence of expected amplicon for SCL phaC gene ( approximately 500 bp), MCL phaC1 with phaZ ( approximately 1.3), and phaC2 with phaZ ( approximately 1.5 kb). Sequence analysis of the PHA synthase gene of Pseudomonas sp. LDC-5 revealed significant differences in phaC1 and phaC2 which were further confirmed by recombinant studies. Recombinant Escherichia coli harboring the partial phaC1 gene was able to accumulate PHA, whereas E. coli with phaC2 did not accumulate PHA as verified by fold analysis, immunoblotting, Gas Chromatography (GC), Differential scanning calorimetry (DSC), and FTIR studies. The predicted theoretical three-dimensional structure revealed that PhaC1 is consistent with alpha/beta hydrolase fold. Monomer composition showed the presence of monomer ranging from C4 to C12: 1 when glucose and sodium octanoate fed as the carbon source. DSC revealed melting temperature peak at 153.12 degrees C and glass transition (T(g)) peaks at -0.37 degrees C. Thermogravimetric analysis revealed that the polymer was stable up to 276 degrees C. Fourier Transform Infrared Spectroscopy (FT-IR) spectral analysis showed the PHA specific wave number at 1,739.67 and 1,161.07 cm(-1). The potential of Pseudomonas sp. LDC-5 and its properties are discussed.

Preparation and characterization of poly(hydroxyalkanoate) from the fermentation of Haloferax mediterranei

In this study, fed-batch fermentation of Haloferax mediterranei using glucose and yeast extract as carbon and nitrogen source, respectively, was carried out to produce poly(hydroxyalkanoate) (PHA). After fermentation for 117 h, the concentration of H. mediterranei and PHA content reached 85.8 g/l and 48.6%, respectively. 1H- and 13C-NMR spectra proved that the produced PHA was poly(3-hydroxybutyrate-co-3-hydroxyvalerate) P(3HB-co-3HV) co-polymer. However, further fractionation using chloroform/acetone revealed that the produced PHA consisted of at least two compositionally different co-polymers (P1 and P2). One P(3HB-co-3HV) co-polymer (P1, 93.4 wt%) contains 10.7 mol% of 3-HV unit in the chain structure and has a high molecular weight of 569.5 kg/mol. The other one (P2, 6.6 wt%) has a slightly higher 3-HV content, ca. 12.3 mol%, but its molecular weight is relatively low, 78.2 kg/mol. Both fractions exhibit two overlapped melting peaks measured by differential scanning calorimetry when the heating rate is at and below 20 degrees C/min. For example, at a heating rate of 10 degrees C/min, the two melting peaks occur at 134.8 degrees C and 144.3 degrees C for P1, and 131.1 degrees C and 140.6 degrees C for P2. Through observing the variation of relative intensity of these two melting peaks by changing the heating rate, it was proven that the phenomenon is caused by a melt/recrystallization process. Glass-transition temperature, crystallization temperature and thermal degradation behavior of these co-polymers were also discussed.

PHA synthase engineering toward superbiocatalysts for custom-made biopolymers

Poly-3-hydroxyalkanoates [P(3HA)s] are biologically produced polyesters that have attracted much attention as biodegradable polymers that can be produced from biorenewable resources. These polymers have many attractive properties for use as bulk commodity plastics, fishing lines, and medical uses that are dependent on the repeating unit structures. Despite the readily apparent benefits of using P(3HA)s as replacements for petrochemical-derived plastics, the use and distribution of P(3HA)s have been limited by their cost of production. This problem is currently being addressed by the engineering of enzymes involved in the production of P(3HA)s. Polyhydroxyalkanoate (PHA) synthase (PhaC) enzymes, which catalyze the polymerization of 3-hydroxyacyl-CoA monomers to P(3HA)s, were subjected to various forms of protein engineering to improve the enzyme activity or substrate specificity. This review covers the recent history of PHA synthase engineering and also summarizes studies that have utilized engineered PHA synthases.

A study on medium chain length-polyhydroxyalkanoate accumulation in Escherichia coli harbouring phaC1 gene of indigenous Pseudomonas sp. LDC-5

AIMS

This study is mainly focused on the heterologous expression and accumulation of polyhydroxyalkanoates (PHA) in Escherichia coli.

METHODS AND RESULTS

PHA synthase gene (phaC1) from indigenous Pseudomonas sp. LDC-5 was amplified by PCR and cloned in E. coli (Qiagen EZ competent cells). The recombinant E. coli was analysed and confirmed for its expression of phaC1 gene by phase contrast microscopy, Western blot analysis and spectral studies (Fourier-transform infrared spectroscopy). It was further evaluated for its accumulation in different carbon and nitrogen sources. The accumulation of PHA (3.4 g l(-1)) was enhanced in the medium supplemented with glycerol and fish peptone compared to the other carbon and nitrogen sources used in this study.

CONCLUSIONS

This study would enable the reduction of cost of PHA production.

SIGNIFICANCE AND IMPACT OF THE STUDY

An important part of this study is that E. coli harbouring partial phaC1 gene could accumulate medium chain length PHA significantly. The results demonstrated that the E. coli strain could be a potential candidate for the large-scale production of polymer. The conditions for the higher yield and productivity will be optimized in the next phase using fermentation studies.

Biotechnological approaches for the production of polyhydroxyalkanoates in microorganisms and plants - a review

The increasing effect of non-degradable plastic wastes is a growing concern. Polyhydroxyalkanoates (PHAs), macromolecule-polyesters naturally produced by many species of microorganisms, are being considered as a replacement for conventional plastics. Unlike petroleum-derived plastics that take several decades to degrade, PHAs can be completely bio-degraded within a year by a variety of microorganisms. This biodegradation results in carbon dioxide and water, which return to the environment. Attempts based on various methods have been undertaken for mass production of PHAs. Promising strategies involve genetic engineering of microorganisms and plants to introduce production pathways. This challenge requires the expression of several genes along with optimization of PHA synthesis in the host. Although excellent progress has been made in recombinant hosts, the barriers to obtaining high quantities of PHA at low cost still remain to be solved. The commercially viable production of PHA in crops, however, appears to be a realistic goal for the future.