Increasing the potency of an alhydrogel-formulated anthrax vaccine by minimizing antigen-adjuvant interactions

Evaluation of Aluminium Hydroxide Nanoparticles as an Efficient Adjuvant to Potentiate the Immune Response against Clostridium botulinum Serotypes C and D Toxoid Vaccines

Clostridium botulinum serotypes C and D cause botulism in livestock, a neuroparalytic disease that results in substantial economic losses. Vaccination with aluminium-based toxoid vaccines is widely used to control the spread of botulism. Aluminium-based adjuvants are preferred owing to their apparent stimulation of the immune responses to toxoid vaccines when compared to other adjuvants. The aim of our study was to evaluate aluminium hydroxide nanoparticles as a potential substitute for alhydrogel in the botulism bivalent vaccine. Botulism vaccines were formulated with either alhydrogel or nanoalum and comparative efficacy between the two formulations was conducted by evaluating the immune response in vaccinated guinea pigs. A significant increase in immunological parameters was observed, with the antibody titres higher in the serum of guinea pigs (20 IU/mL of anti-BoNT C/D) injected with nanoalum-containing vaccine than guinea pigs inoculated with the standard alhydrogel-containing vaccine (8.7 IU/mL and 10 IU/mL of anti-BoNT C and anti-BoNT D, respectively). Additionally, the nanoalum-containing vaccine demonstrated potency in a multivalent vaccine (20 IU/mL of anti-BoNT C/D), while the standard alhydrogel-containing vaccine showed a decline in anti-BoNT C (5 IU/mL) antibody titres.

Role of site-directed mutagenesis and adjuvants in the stability and potency of anthrax protective antigen

Anthrax is a zoonotic infection caused by the gram-positive, aerobic, spore-forming bacterium Bacillus anthracis. Depending on the origin of the infection, serious health problems or mortality is possible. The virulence of B. anthracis is reliant on three pathogenic factors, which are secreted upon infection: protective antigen (PA), lethal factor (LF), and edema factor (EF). Systemic illness results from LF and EF entering cells through the formation of a complex with the heptameric form of PA, bound to the membrane of infected cells through its receptor. The currently available anthrax vaccines have multiple drawbacks, and recombinant PA is considered a promising second-generation vaccine candidate. However, the inherent chemical instability of PA through Asn deamidation at multiple sites prevents its use after long-term storage owing to loss of potency. Moreover, there is a distinct possibility of B. anthracis being used as a bioweapon; thus, the developed vaccine should remain efficacious and stable over the long-term. Second-generation anthrax vaccines with appropriate adjuvant formulations for enhanced immunogenicity and safety are desired. In this article, using protein engineering approaches, we have reviewed the stabilization of anthrax vaccine candidates that are currently licensed or under preclinical and clinical trials. We have also proposed a formulation to enhance recombinant PA vaccine potency via adjuvant formulation.

Evaluation of the AV7909 Anthrax Vaccine Toxicity in Sprague Dawley Rats Following Three Intramuscular Administrations

AV7909 is a next-generation anthrax vaccine under development for post-exposure prophylaxis following suspected or confirmed Bacillus anthracis exposure, when administered in conjunction with the recommended antibacterial regimen. AV7909 consists of the FDA-approved BioThrax® vaccine (anthrax vaccine adsorbed) and an immunostimulatory Toll-like receptor 9 agonist oligodeoxynucleotide adjuvant, CPG 7909. The purpose of this study was to evaluate the potential systemic and local toxicity of AV7909 when administered via repeat intramuscular injection to the right thigh muscle (biceps femoris) to male and female Sprague Dawley rats. The vaccine was administered on Days 1, 15, and 29 and the animals were assessed for treatment-related effects followed by a 2-week recovery period to evaluate the persistence or reversibility of any toxic effects. The AV7909 vaccine produced no apparent systemic toxicity based on evaluation of clinical observations, body weights, body temperature, clinical pathology, and anatomic pathology. Necrosis and inflammation were observed at the injection sites as well as in regional lymph nodes and adjacent tissues and were consistent with immune stimulation. Antibodies against B. anthracis protective antigen (PA) were detected in rats treated with the AV7909 vaccine, confirming relevance of this animal model for the assessment of systemic toxicity of AV7909. In contrast, sera of rats that received saline or soluble CPG 7909 alone were negative for anti-PA antibodies. Overall, 3 intramuscular immunizations of Sprague Dawley rats with AV7909 were well tolerated, did not induce mortality or any systemic adverse effects, and did not result in any delayed toxicity.

Co-Administration of Aluminium Hydroxide Nanoparticles and Protective Antigen Domain 4 Encapsulated Non-Ionic Surfactant Vesicles Show Enhanced Immune Response and Superior Protection against Anthrax

Aluminium salts have been the adjuvant of choice in more than 100 licensed vaccines. Here, we have studied the synergistic effect of aluminium hydroxide nanoparticles (AH np) and non-ionic surfactant-based vesicles (NISV) in modulating the immune response against protective antigen domain 4 (D4) of Bacillus anthracis. NISV was prepared from Span 60 and cholesterol, while AH np was prepared from aluminium chloride and sodium hydroxide. AH np was co-administered with NISV encapsulating D4 (NISV-D4) to formulate AHnp/NISV-D4. The antigen-specific immune response of AHnp/NISV-D4 was compared with that of commercial alhydrogel (alhy) co-administered with NISV-D4 (alhydrogel/NISV-D4), NISV-D4, AHnp/D4, and alhydrogel/D4. Co-administration of NISV-D4 with AH np greatly improved the D4-specific antibody titer as compared to the control groups. Based on IgG isotyping and ex vivo cytokine analysis, AHnp/NISV-D4 generated a balanced Th1/Th2 response. Furthermore, AH np/NISV-D4 showed superior protection against anthrax spore challenge in comparison to other groups. Thus, we demonstrate the possibility of developing a novel combinatorial nanoformulation capable of augmenting both humoral and cellular response, paving the way for adjuvant research.

Preformulation Characterization and the Effect of Ionic Excipients on the Stability of a Novel DB Fusion Protein

Shigella ssp cause bacillary dysentery (shigellosis) which has high global morbidity in young children and the elderly. The virulence of Shigella relies upon a type III secretion system (T3SS) which injects host altering effector proteins into targeted intestinal cells. The Shigella T3SS contains two components, invasion plasmid antigen D (IpaD) and invasion plasmid antigen B (IpaB), that were previously identified as broadly protective antigens. When IpaD and IpaB were co-expressed to give the DB fusion (DBF) protein, vaccine efficacy was further improved. Biophysical characterization under various pH conditions showed that DBF is most stable at pH 7 and 8 and loses its conformational integrity at 48 and 50 °C respectively. Forced degradation studies revealed significant effects on the secondary structure, tertiary structure and conformational stability of DBF. In the presence of phosphate buffers as well as other anionic excipients, DBF demonstrated a concentration dependent conformational stabilization. Molecular docking revealed potential polyanion binding sites in DBF that may interact with phytic acid. These sites can be exploited to stabilize the DBF protein. This work highlights potential destabilizing and stabilizing factors, which not only improves our understanding of the DBF protein but helps in future development of a stable Shigella vaccine.

Study of Interactions between Antigens and Polymeric Adjuvants in Vaccines by Frontal Analysis Continuous Capillary Electrophoresis

Vaccine adjuvants are used to enhance the immune response induced by antigens that have insufficient immunostimulatory capabilities. The present work aims at developing a frontal analysis continuous capillary electrophoresis (FACCE) methodology for the study of antigen-adjuvant interactions in vaccine products. After method optimization using three cationic model proteins, namely lysozyme, cytochrome c, and ribonuclease A, FACCE was successfully implemented to quantify the free antigen and thus to determine the interaction parameters (stoichiometry and binding constant) between an anionic polymeric adjuvant (polyacrylic acid, SPA09) and a cationic vaccine antigen in development for the treatment for Staphylococcus aureus. The influence of the ionic strength of the medium on the interactions was investigated. A strong dependence of the binding parameters with the ionic strength was observed. The concentration of the polymeric adjuvant was also found to significantly modify the ionic strength of the formulation, the extent of which could be estimated and corrected.

Formulation and preclinical studies with a trivalent rotavirus P2-VP8 subunit vaccine

More effective rotavirus vaccines are essential for preventing extensive diarrheal morbidity and mortality in children under five years of age in low-resource regions. Nonreplicating rotavirus vaccines (NRRV) administered parenterally provide an alternate vaccination method to the current licensed oral vaccine. Live attenuated vaccines and may generate increased efficacy in low-resource settings because the parenteral administration route bypasses some of the challenges associated with oral administration, including differences in intestinal environments. Work described here supports development of a trivalent NRRV vaccine for parenteral administration to avoid complications of the gastrointestinal route. Recombinant VP8* subunit proteins representing some of the most prevalent strains of rotavirus infecting humans - DS-1 (P[4]), 1076 (P[6]), and Wa (P[8]) - were combined with an aluminum adjuvant and the P2 epitope of tetanus toxoid to enhance the immune response to this NRRV antigen. Vaccine formulation development included selection of aluminum hydroxide (Alhydrogel®) as an appropriate adjuvant as well as an optimal buffer to maintain antigen stability and optimize antigen binding to the adjuvant. Characterization assays were used to select the lead vaccine formulation and monitor formulation stability. The NRRV liquid formulation was stable for one year at 2°C to 8°C and four weeks at 37°C. Immunogenicity of the NRRV formulation was evaluated using a guinea pig model, where we demonstrated that the adjuvant provided a 20-fold increase in neutralization titer against a homologous antigen and that the P2-fusion also enhanced the serum neutralizing antibody responses. This vaccine candidate is currently being evaluated in human clinical trials.

Atomic-Scale Description of Interfaces between Antigen and Aluminum-Based Adjuvants Used in Vaccines by Dynamic Nuclear Polarization (DNP) Enhanced NMR Spectroscopy

The addition of aluminum-based adjuvants in vaccines enhances the immune response to antigens. The strength of antigen adsorption on adjuvant gels is known to modulate vaccine efficacy. However, a detailed understanding of the mechanisms of interaction between aluminum gels and antigens is still missing. Herein, a new analytical approach based on dynamic nuclear polarization (DNP) enhanced NMR spectroscopy under magic angle spinning (MAS) is implemented to provide a molecular description of the antigen-adjuvant interface. This approach is demonstrated on hepatitis B surface antigen particles in combination with three aluminum gels obtained from different suppliers. Both noncovalent and covalent interactions between the phospholipids of the antigen particles and the surface of the aluminum gels are identified by using MAS DNP NMR ²⁷ Al and ³¹ P correlation experiments. Although covalent interactions were detected for only one of the formulations, dipolar recoupling rotational echo adiabatic passage double resonance (REAPDOR) experiments reveal significant differences in the strength of weak interactions.

Repeat Dose Toxicity Study of the AV7909 Anthrax Vaccine Candidate in Juvenile Rats

AV7909 is a next-generation anthrax vaccine candidate indicated for post-exposure prophylaxis of exposure to Bacillus anthracis. AV7909 consists of the Anthrax Vaccine Adsorbed (AVA) bulk drug substance and the immunostimulatory Toll-like receptor 9 agonist oligodeoxynucleotide adjuvant, CPG 7909. Safety testing for pediatric population is warranted to support the potential emergency use of AV7909 in children. This study was conducted to investigate the local tolerance and potential systemic toxicity and their reversibility in juvenile rats by repeat intramuscular injections of the AV7909 vaccine candidate. Animals were dosed on postnatal day (PND) 21 (at weaning), PND 28, and PND 35, with the test article (AV7909), the adjuvant alone (Alhydrogel + CPG 7909), or sterile water for injection. Core group animals were necropsied on PND 37 and recovery group on PND 49. Study end points included survival, clinical observations, injection site observations, body weights, clinical pathology (hematology, coagulation, and clinical chemistry), pro-inflammatory biomarker analysis (alpha-2 macroglobulin [A2M] and alpha-1 acid glycoprotein [AGP]), and anatomic pathology. Immune response to vaccination was measured using the high-throughput anthrax lethal toxin neutralization assay (htpTNA). The AV7909 vaccine candidate produced no apparent systemic or local toxicity. The AGP and A2M levels were elevated in both the adjuvant-alone and AV7909 groups at the end of treatment but were comparable to control levels by the end of the recovery period. All animals in the AV7909 group demonstrated a robust neutralizing antibody response. The results indicate that AV7909 has a favorable safety profile in juvenile rats.

Protection of outbred mice against a vaginal challenge by a Chlamydia trachomatis serovar E recombinant major outer membrane protein vaccine is dependent on phosphate substitution in the adjuvant

Chlamydia trachomatis is the most common bacterial sexually-transmitted pathogen for which there is no vaccine. We previously demonstrated that the degree of phosphate substitution in an aluminum hydroxide adjuvant in a TLR-4-based C. trachomatis serovar E (Ser E) recombinant major outer membrane protein (rMOMP) formulation had an impact on the induced antibody titers and IFN-γ levels. Here, we have extended these observations using outbreed CD-1 mice immunized with C. trachomatis Ser E rMOMP formulations to evaluate the impact on bacterial challenge. The results confirmed that the rMOMP vaccine containing the adjuvant with the highest phosphate substitution induced the highest neutralizing antibody titers while the formulation with the lowest phosphate substitution induced the highest IFN-γ production. The most robust protection was observed in mice vaccinated with the formulation containing the adjuvant with the lowest phosphate substitution, as shown by the number of mice with positive vaginal cultures, number of positive cultures and number of C. trachomatis inclusion forming units recovered. This is the first report showing that vaccination of an outbred strain of mice with rMOMP induces protection against a vaginal challenge with C. trachomatis.

Crystalline and Amorphous Preparation of Aluminum Hydroxide Nanoparticles Enhances Protective Antigen Domain 4 Specific Immunogenicity and Provides Protection Against Anthrax

Introduction

Aluminum salts, although they have been used as adjuvants in many vaccine formulations since 1926, exclusively induce a Th2-biased immune response, thereby limiting their use against intracellular pathogens like Mycobacterium tuberculosis.

Methods and Results

Herein, we synthesized amorphous and crystalline forms of aluminum hydroxide nanoparticles (AH nps) of 150–200 nm size range. Using Bacillus anthracis protective antigen domain 4 (D4) as a model antigen, we demonstrated that both amorphous and crystalline forms of AH nps displayed enhanced antigen D4 uptake by THP1 cells as compared to commercial adjuvant aluminum hydroxide gel (AH gel). In a mouse model, both amorphous and crystalline AH nps triggered an enhanced D4-specific Th2- and Th1-type immune response and conferred superior protection against anthrax spore challenge as compared to AH gel. Physicochemical characterization of crystalline and amorphous AH nps revealed stronger antigen D4 binding and release than AH gel.

Conclusion

These results demonstrate that size and crystallinity of AH nps play important roles in mediating enhanced antigen presenting cells (APCs) activation and potentiating a strong antigen-specific immune response, and are critical parameters for the rational design of alum-based Th1-type adjuvant to induce a more balanced antigen-specific immune response.

Effect of Aluminum Adjuvant and Preservatives on Structural Integrity and Physicochemical Stability Profiles of Three Recombinant Subunit Rotavirus Vaccine Antigens

A nonreplicating rotavirus vaccine (NRRV) containing 3 recombinant fusion proteins adsorbed to aluminum adjuvant (Alhydrogel [AH]) is currently in clinical trials. The compatibility and stability of monovalent NRRV antigen with key components of a multidose vaccine formulation were examined using physicochemical and immunochemical methods. The extent and strength of antigen-adjuvant binding were diminished by increasing phosphate concentration, and acceptable levels were identified along with alternate buffering agents. Addition of the preservative thimerosal destabilized AH-adsorbed P2-VP8-P[8] as measured by differential scanning calorimetry. Over 3 months at 4°C, AH-adsorbed P2-VP8-P[8] was stable, whereas at 25°C and 37°C, instability was observed which was greatly accelerated by thimerosal addition. Loss of antibody binding (enzyme-linked immunosorbent assay) correlated with loss of structural integrity (differential scanning calorimetry, fluorescence spectroscopy) with concomitant nonnative disulfide bond formation (sodium dodecyl sulfate-polyacrylamide gel electrophoresis) and Asn deamidation (liquid chromatography -mass spectrometry peptide mapping). An alternative preservative (2-phenoxyethanol) showed similar antigen destabilization. Due to limited availability, only key assays were performed with monovalent P2-VP8-P[4] and P2-VP8-P[6] AH-adsorbed antigens, and varying levels of preservative incompatibility were observed. In summary, monovalent AH-adsorbed NRRV antigens stored at 4°C showed good stability without preservatives; however, future formulation development efforts are required to prepare a stable, preservative-containing, multidose NRRV formulation.

Physicochemical study of the influenza A virus M2 protein and aluminum salt adjuvant interaction as a vaccine candidate model

Aim: The present study evaluated the structural changes resulting from the interaction between a recombinant influenza A virus M2 protein and aluminum hydroxide adjuvant to investigate the antigen for further immunological studies. Materials & methods: Membrane protein II was produced from the H1N1 subtype of human influenza A virus. The interaction between M2 protein and alum inum hydroxide adjuvant was evaluated by physicochemical techniques including scanning electron microscope, UV-Vis spectra, Fourier-transform infrared spectroscopy and circular dichroism spectroscopy. Results: Physicochemical methods showed high-level protein adsorption and accessibility to the effective parts of the protein. Conclusion: It was concluded that M2 protein secondary structural perturbations, including the α-helix-to-β-sheet transition, enhanced its mechanical properties toward adsorption.

Mechanisms of Antigen Adsorption Onto an Aluminum-Hydroxide Adjuvant Evaluated by High-Throughput Screening

The adsorption mechanism of antigen on aluminum adjuvant can affect antigen elution at the injection site and hence the immune response. Our aim was to evaluate adsorption onto aluminum hydroxide (AH) by ligand exchange and electrostatic interactions of model proteins and antigens, bovine serum albumin (BSA), β-casein, ovalbumin (OVA), hepatitis B surface antigen, and tetanus toxin (TT). A high-throughput screening platform was developed to measure adsorption isotherms in the presence of electrolytes and ligand exchange by a fluorescence-spectroscopy method that detects the catalysis of 6,8-difluoro-4-methylumbelliferyl phosphate by free hydroxyl groups on AH. BSA adsorption depended on predominant electrostatic interactions. Ligand exchange contributes to the adsorption of β-casein, OVA, hepatitis B surface antigen, and TT onto AH. Based on relative surface phosphophilicity and adsorption isotherms in the presence of phosphate and fluoride, the capacities of the proteins to interact with AH by ligand exchange followed the trend: OVA < β-casein < BSA < TT. This could be explained by both the content of ligands available in the protein structure for ligand exchange and the antigen's molecular weight. The high-throughput screening platform can be used to better understand the contributions of ligand exchange and electrostatic attractions governing the interactions between an antigen adsorbed onto aluminum-containing adjuvant.

Alum: an old dog with new tricks

Aluminum compounds (alum) are the most widely used adjuvants in veterinary and human vaccines. Alum was initially thought to be a simple depot for antigen retention; however, our understanding of the mechanism by which it works has progressed substantially in recent decades. Nonetheless, consensus regarding its roles in different aspects of immune regulation has not been reached, and it remains a long-standing research subject in the field of vaccinology. This review, in chronological order, discusses the various hypotheses proposed in mostly inadequate attempts to illuminate the mechanism by which alum works, from the depot theory to the involvement of the NLRP3 inflammasome and from cell death-associated danger factors to crystalline structure-mediated plasma membrane alteration. In addition, novel findings of unexpected beneficial effects of decreased HBV (Hepatitis B virus) viral load and HBeAg seroconversion in chronically infected patients, as well as significant tumor suppression in experimental mice following multiple alum-only injections are examined, revealing alum's potential clinical applications beyond its use as a simple tool in antigen preparation. With increasing threats of emerging microbes, originating from natural or man-made sources, that pose significant health concerns at the population scale, the potential use of alum as a 'first-aid' vaccine is also discussed.

The mechanisms of action of vaccines containing aluminum adjuvants: an in vitro vs in vivo paradigm

Adjuvants such as the aluminum compounds (alum) have been dominantly used in many vaccines due to their immunopotentiation and safety records since 1920s. However, how these mineral agents influence the immune response to vaccination remains elusive. Many hypotheses exist as to the mode of action of these adjuvants, such as depot formation, antigen (Ag) targeting, and the induction of inflammation. These hypotheses are based on many in vitro and few in vivo studies. Understanding how cells interact with adjuvants in vivo will be crucial to fully understanding the mechanisms of action of these adjuvants. Interestingly, how alum influences the target cell at both the cellular and molecular level, and the consequent innate and adaptive responses, will be critical in the rational design of effective vaccines against many diseases. Thus, in this review, mechanisms of action of alum have been discussed based on available in vitro vs in vivo evidences to date.

Polyionic vaccine adjuvants: another look at aluminum salts and polyelectrolytes

Adjuvants improve the adaptive immune response to a vaccine antigen by modulating innate immunity or facilitating transport and presentation. The selection of an appropriate adjuvant has become vital as new vaccines trend toward narrower composition, expanded application, and improved safety. Functionally, adjuvants act directly or indirectly on antigen presenting cells (APCs) including dendritic cells (DCs) and are perceived as having molecular patterns associated either with pathogen invasion or endogenous cell damage (known as pathogen associated molecular patterns [PAMPs] and damage associated molecular patterns [DAMPs]), thereby initiating sensing and response pathways. PAMP-type adjuvants are ligands for toll-like receptors (TLRs) and can directly affect DCs to alter the strength, potency, speed, duration, bias, breadth, and scope of adaptive immunity. DAMP-type adjuvants signal via proinflammatory pathways and promote immune cell infiltration, antigen presentation, and effector cell maturation. This class of adjuvants includes mineral salts, oil emulsions, nanoparticles, and polyelectrolytes and comprises colloids and molecular assemblies exhibiting complex, heterogeneous structures. Today innovation in adjuvant technology is driven by rapidly expanding knowledge in immunology, cross-fertilization from other areas including systems biology and materials sciences, and regulatory requirements for quality, safety, efficacy and understanding as part of the vaccine product. Standardizations will aid efforts to better define and compare the structure, function and safety of adjuvants. This article briefly surveys the genesis of adjuvant technology and then re-examines polyionic macromolecules and polyelectrolyte materials, adjuvants currently not known to employ TLR. Specific updates are provided for aluminum-based formulations and polyelectrolytes as examples of improvements to the oldest and emerging classes of vaccine adjuvants in use.

Particulate inorganic adjuvants: recent developments and future outlook

Objectives

To review the state of the art and assess future potential in the use of inorganic particulates as vaccine adjuvants.

Key findings

An adjuvant is an entity added to a vaccine formulation to ensure that robust immunity to the antigen is inculcated. The inclusion of an adjuvant is typically vital for the efficacy of vaccines using inactivated organisms, subunit and DNA antigens. With increasing research efforts being focused on subunit and DNA antigens because of their improved safety profiles, the development of appropriate adjuvants is becoming ever more crucial. Despite this, very few adjuvants are licensed for use in humans (four by the FDA, five by the European Medicines Agency). The most widely used adjuvant, alum, has been used for nearly 90 years, yet its mechanism of action remains poorly understood. In addition, while alum produces a powerful antibody Th2 response, it does not provoke the cellular immune response required for the elimination of intracellular infections or cancers. New adjuvants are therefore needed, and inorganic systems have attracted much attention in this regard.

Summary

In this review, the inorganic adjuvants currently in use are considered, and the efforts made to date to understand their mechanisms of action are summarised. We then move on to survey the literature on inorganic particulate adjuvants, focusing on the most interesting recent developments in this area and their future potential.

Influenza virus-like particle vaccines made in Nicotiana benthamiana elicit durable, poly-functional and cross-reactive T cell responses to influenza HA antigens

Cell-mediated immunity plays a major role in long-lived, cross-reactive protection against influenza virus. We measured long-term poly-functional and cross-reactive T cell responses to influenza hemagglutinin (HA) elicited by a new plant-made Virus-Like Particle (VLP) vaccine targeting either H1N1 A/California/7/09 (H1) or H5N1 A/Indonesia/5/05 (H5). In two independent clinical trials, we characterized the CD4(+) and CD8(+) T cell homotypic and heterotypic responses 6 months after different vaccination regimens. Responses of VLP-vaccinated subjects were compared with placebo and/or a commercial trivalent inactivated vaccine (TIV:Fluzone™) recipients. Both H1 and H5 VLP vaccines elicited significantly greater poly-functional CD4(+) T cell responses than placebo and TIV. Poly-functional CD8(+) T cell responses were also observed after H1 VLP vaccination. Our results show that plant-made HA VLP vaccines elicit both strong antibody responses and poly-functional, cross-reactive memory T cells that persist for at least 6 months after vaccination.

Advax-adjuvanted recombinant protective antigen provides protection against inhalational anthrax that is further enhanced by addition of murabutide adjuvant

Subunit vaccines against anthrax based on recombinant protective antigen (PA) potentially offer more consistent and less reactogenic anthrax vaccines but require adjuvants to achieve optimal immunogenicity. This study sought to determine in a murine model of pulmonary anthrax infection whether the polysaccharide adjuvant Advax or the innate immune adjuvant murabutide alone or together could enhance PA immunogenicity by comparison to an alum adjuvant. A single immunization with PA plus Advax adjuvant afforded significantly greater protection against aerosolized Bacillus anthracis Sterne strain 7702 than three immunizations with PA alone. Murabutide had a weaker adjuvant effect than Advax when used alone, but when murabutide was formulated together with Advax, an additive effect on immunogenicity and protection was observed, with complete protection after just two doses. The combined adjuvant formulation stimulated a robust, long-lasting B-cell memory response that protected mice against an aerosol challenge 18 months postimmunization with acceleration of the kinetics of the anamnestic IgG response to B. anthracis as reflected by ∼4-fold-higher anti-PA IgG titers by day 2 postchallenge versus mice that received PA with Alhydrogel. In addition, the combination of Advax plus murabutide induced approximately 3-fold-less inflammation than Alhydrogel as measured by in vivo imaging of cathepsin cleavage resulting from injection of ProSense 750. Thus, the combination of Advax and murabutide provided enhanced protection against inhalational anthrax with reduced localized inflammation, making this a promising next-generation anthrax vaccine adjuvanting strategy.