Structural and genetic organization of IS232, a new insertion sequence of Bacillus thuringiensis

Mosquitocidal toxin-like islands in Bacillus thuringiensis S2160-1 revealed by complete-genome sequence and MS proteomic analysis

Here, we present the whole genome sequence of Bt S2160-1, a potential alternative to the mosquitocidal model strain, Bti. One chromosome genome and four mega-plasmids were contained in Bt S2160-1, and 13 predicted genes encoding predicted insecticidal crystal proteins were identified clustered on one plasmid pS2160-1p2 containing two pathogenic islands (PAIs) designed as PAI-1 (Cry54Ba, Cry30Ea4, Cry69Aa-like, Cry50Ba2-like, Cry4Ca1-like, Cry30Ga2, Cry71Aa-like, Cry72Aa-like, Cry70Aa-like, Cyt1Da2-like and Vpb4C1-like) and PAI-2 (Cyt1Aa-like, and Tpp80Aa1-like). The clusters appear to represent mosquitocidal toxin islands similar to pathogenicity islands. Transcription/translation of 10 of the 13 predicted genes was confirmed by whole-proteome analysis using LTQ-Orbitrap LC-MS/MS. In summary, the present study identified the existence of a mosquitocidal toxin island in Bacillus thuringiensis, and provides important genomic information for understanding the insecticidal mechanism of B. thuringiensis.

Elucidating the genomic history of commercially used Bacillus thuringiensis subsp. tenebrionis strain NB176

Bacillus thuringiensis subsp. tenebrionis (Btt) produces a coleopteran-specific crystal protoxin protein (Cry3Aa δ-endotoxin). After its discovery in 1982, the strain NB125 (DSM 5526) was eventually registered in 1990 to control the Colorado potato beetle (Leptinotarsa decemlineata). Gamma-irradiation of NB125 resulted in strain NB176-1 (DSM 5480) that exhibited higher cry3Aa production and became the active ingredient of the plant protection product Novodor^® FC. Here, we report a comparative genome analysis of the parental strain NB125, its derivative NB176-1 and the current commercial production strain NB176. The entire genome sequences of the parental and derivative strains were deciphered by a hybrid de novo approach using short (Illumina) and long (Nanopore) read sequencing techniques. Genome assembly revealed a chromosome of 5.4 to 5.6 Mbp and six plasmids with a size range from 14.9 to 250.5 kbp for each strain. The major differences among the original NB125 and the derivative strains NB176-1 and NB176 were an additional copy of the cry3Aa gene, which translocated to another plasmid as well as a chromosomal deletion (~ 178 kbp) in NB176. The assembled genome sequences were further analyzed in silico for the presence of virulence and antimicrobial resistance (AMR) genes.

Diversity of Bacillus cereus sensu lato mobilome

BACKGROUND

Bacillus cereus sensu lato s.l.) is a group of bacteria displaying close phylogenetic relationships but a high ecological diversity. The three most studied species are Bacillus anthracis, Bacillus cereus sensu stricto and Bacillus thuringiensis. While some species are pathogenic to mammals or associated with food poisoning, Bacillus thuringiensis is a well-known entomopathogenic bacterium used as biopesticide worldwide. B. cereus s.l. also contains a large variety of mobile genetic elements (MGEs).

RESULTS

In this study, we detail the occurrence and plasmid vs. chromosome distribution of several MGEs in 102 complete and annotated genomes of B. cereus s.l. These MGEs include 16 Insertion Sequence (IS) families, the Tn3 family, 18 different Bacillus cereus repeats (BCRs) and 30 known group II introns.

CONCLUSIONS

Our analysis not only shows the diversity of these MGEs among strains of the same species and between different species within the B. cereus s.l. group, but also highlights the potential impact of these elements on the plasticity of the plasmid pool, and the TEs (Transposable Elements) - species relationship within B. cereus s.l.

The Bacillus cereus Group: Bacillus Species with Pathogenic Potential

The Bacillus cereus group includes several Bacillus species with closely related phylogeny. The most well-studied members of the group, B. anthracis, B. cereus, and B. thuringiensis, are known for their pathogenic potential. Here, we present the historical rationale for speciation and discuss shared and unique features of these bacteria. Aspects of cell morphology and physiology, and genome sequence similarity and gene synteny support close evolutionary relationships for these three species. For many strains, distinct differences in virulence factor synthesis provide facile means for species assignment. B. anthracis is the causative agent of anthrax. Some B. cereus strains are commonly recognized as food poisoning agents, but strains can also cause localized wound and eye infections as well as systemic disease. Certain B. thuringiensis strains are entomopathogens and have been commercialized for use as biopesticides, while some strains have been reported to cause infection in immunocompromised individuals. In this article we compare and contrast B. anthracis, B. cereus, and B. thuringiensis, including ecology, cell structure and development, virulence attributes, gene regulation and genetic exchange systems, and experimental models of disease.

Genetic Environment of cry1 Genes Indicates Their Common Origin

Although in Bacillus thuringiensis the cry genes coding for the insecticidal crystal proteins are plasmid-borne and are usually associated with mobile genetic elements, several aspects related to their genomic organization, diversification, and transmission remain to be elucidated. Plasmids of B. thuringiensis and other members of the Bacillus cereus group (n = 364) deposited in GenBank were screened for the presence of cry1 genes, and their genetic environment was analyzed using a comparative bioinformatic approach. The cry1 genes were identified in 27 B. thuringiensis plasmids ranging from 64 to 761 kb, and were predominantly associated with the ori44, ori60, or double orf156/orf157 and pXO1-16/pXO1-14 replication systems. In general, the cry1 genes occur individually or as a part of an insecticidal pathogenicity island (PAI), and are preceded by genes coding for an N-acetylmuramoyl-l-alanine amidase and a putative K⁺(Na⁺)/H⁺ antiporter. However, except in the case of the PAI, the latter gene is disrupted by the insertion of IS231B. Similarly, numerous mobile elements were recognized in the region downstream of cry1, except for cry1I that follows cry1A in the PAI. Therefore, the cassette involving cry1 and these two genes, flanked by transposable elements, named as the cry1 cassette, was the smallest cry1-carrying genetic unit recognized in the plasmids. Conservation of the genomic environment of the cry1 genes carried by various plasmids strongly suggests a common origin, possibly from an insecticidal PAI carried by B. thuringiensis megaplasmids.

Complete genome sequence of Bacillus thuringiensis subsp. kurstaki strain HD73

Bacillus thuringiensis is a Gram-positive bacterium that produces intracellular protein crystals toxic to a wide variety of insect larvae. We report the complete genome sequence of Bacillus thuringiensis subsp. kurstaki strain HD73 from the Centre OILB (Institut Pasteur, France), which belongs to serotype 3ab and is toxic to lepidopteran larvae.

Evidence of DNA rearrangements in the 128-kilobase pBtoxis plasmid of Bacillus thuringiensis israelensis

BUPM97 is a novel Tunisian isolate of Bacillus thuringiensis israelensis presenting insecticidal activity against Culex pipiens larvae. The delta-endotoxins pattern of this strain was different from that of the reference strain B. thuringiensis israelensis H14. Therefore, the study of its cry genes content was carried out by restriction-fragment-length-polymorphism (RFLP) using specific cry genes probes and by DNA sequencing. It was clearly demonstrated that in the strain BUPM97 the cry4A and cry10A genes were deleted from the B. thuringiensis israelensis 128-kb pBtoxis plasmid. In addition, a strong DNA sequence polymorphism was evidenced in the same plasmid downstream from the cry4B gene. This very particular DNA dynamic evidenced in this new strain of B. thuringiensis israelensis should be taken into consideration, regarding the strain stability during the industrial production of B. thuringiensis bioinsecticides.

Distribution of the ermG gene among bacterial isolates from porcine intestinal contents

The ermG gene was first found in the soil bacterium Bacillus sphaericus. More recently, it was found in several human intestinal Bacteroides species. We report here the first finding of ermG genes in gram-positive bacteria isolated from porcine feces and from under-barn manure pits used to store porcine wastes. The porcine ermG sequences were identical to the sequence of the B. sphaericus ermG gene except that six of the seven ermG-containing strains contained an insertion sequence element insertion in the C-terminal end of the gene. The porcine ermG genes were found in three different gram-positive genera, an indication that it is possible that the gene is being spread by horizontal gene transfer. A segment of a Bacteroides conjugative transposon that carries an ermG gene cross-hybridized with DNA from six of the seven porcine isolates, but the restriction patterns in the porcine strains were different from that of the Bacteroides conjugative transposon.

Mosaic structure of a multiple-drug-resistant, conjugative plasmid from Campylobacter jejuni

Partial sequence analysis of a tet(O) plasmid from a multiple-drug-resistant clinical isolate of Campylobacter jejuni revealed 10 genes or pseudogenes encoding different aminoglycoside inactivating enzymes, transposase-like genes, and multiple unknown genes from a variety of pathogenic and commensal bacteria. The plasmid could be mobilized by a P incompatibility group plasmid into Escherichia coli, where it apparently integrated into the chromosome and expressed high-level resistance to multiple aminoglycoside antibiotics. This work provides new information about both the nature of drug resistance in C. jejuni and the ability of C. jejuni to exchange genes with other bacterial species.

A new insertion variant, IS231I, isolated from a mosquito-specific strain of Bacillus thuringiensis

A new insertion variant belonging to the family IS231, designated IS231I, was isolated from a mosquito larvicidal strain of the Bacillus thuringiensis serovar sotto (H4ab). IS231I was 1653 bp long and delimited by two 20 bp inverted repeats with one mismatch, flanked by two perfect 11 bp direct repeats. The element contained a single open reading frame (ORF) encoding 478 amino acids and five conserved domains: N1, N2, N3, C1, and C2. The 5' noncoding region upstream of the ORF, presumed to form a stable stem-and-loop structure, was highly conserved in IS231I. The secondary structure conformation had a deduced free energy (DeltaG=25 degrees C) of -17.2 kcal/mol. Comparison of the IS231I amino acid sequence with those of the 10 existing IS variants revealed that the new variant shares 89% identity with IS231A and IS231B, 65-66% with IS231M and IS231N, and 38% with IS231W.

Identification, distribution pattern of IS231elements inBacillus thuringiensisand their phylogenetic analysis

In order to better understand the fundamental biology of Bacillus thuringiensis, a single oligonucleotide primer (5'-CATSSCCATCAASYTAAVR-3') was used to investigate the distribution pattern of IS231 elements in B. thuringiensis by PCR. The results indicated that IS231 elements appeared in 20 standard strains and 107 of 111 China isolates. Three novel IS231, IS231J, IS231O and IS231Q, five variants and a mobile insertion cassette MICBth4 were cloned from eight standard strains of B. thuringiensis, respectively. Interestingly, BLAST analysis revealed that the 5' end of novel IS231J shared 99% identity in 495-bp with a DNA segment adjacent to the 3' end of B. thuringiensis vip1Ac gene (GenBank Accession No. ). Two phylogenetic trees of IS231 elements were constructed and analyzed by neighbor-joining and UPGMA methods from PHYLIP 3.6b program, respectively.

Highly conjugative pMG1-like plasmids carrying Tn1546-like transposons that encode vancomycin resistance in Enterococcus faecium

A total of 12 VanA-type vancomycin-resistant enterococci, consisting of 10 Enterococcus faecium isolates and two Enterococcus avium isolates, were examined in detail. The vancomycin resistance conjugative plasmids pHTalpha (65.9 kbp), pHTbeta (63.7 kbp), and pHTgamma (66.5 kbp) were isolated from each of three different E. faecium strains. The plasmids transferred highly efficiently between enterococcus strains during broth mating and were homologous with pMG1 (Gm(r); 65.1 kb).

Nucleotide sequence and genetic structure of a novel carbaryl hydrolase gene (cehA) from Rhizobium sp. strain AC100

Rhizobium sp. strain AC100, which is capable of degrading carbaryl (1-naphthyl-N-methylcarbamate), was isolated from soil treated with carbaryl. This bacterium hydrolyzed carbaryl to 1-naphthol and methylamine. Carbaryl hydrolase from the strain was purified to homogeneity, and its N-terminal sequence, molecular mass (82 kDa), and enzymatic properties were determined. The purified enzyme hydrolyzed 1-naphthyl acetate and 4-nitrophenyl acetate indicating that the enzyme is an esterase. We then cloned the carbaryl hydrolase gene (cehA) from the plasmid DNA of the strain and determined the nucleotide sequence of the 10-kb region containing cehA. No homologous sequences were found by a database homology search using the nucleotide and deduced amino acid sequences of the cehA gene. Six open reading frames including the cehA gene were found in the 10-kb region, and sequencing analysis shows that the cehA gene is flanked by two copies of insertion sequence-like sequence, suggesting that it makes part of a composite transposon.

The chlorocatechol-catabolic transposon Tn5707 of Alcaligenes eutrophus NH9, carrying a gene cluster highly homologous to that in the 1,2,4-trichlorobenzene-degrading bacterium Pseudomonas sp. strain P51, confers the ability to grow on 3-chlorobenzoate

Alcaligenes eutrophus (Ralstonia eutropha) NH9, isolated in Japan, utilizes 3-chlorobenzoate as its sole source of carbon and energy. Sequencing of the relevant region of plasmid pENH91 from strain NH9 revealed that the genes for the catabolic enzymes were homologous to the genes of the modified ortho-cleavage pathway. The genes from strain NH9 (cbnR-ABCD) showed the highest homology (89 to 100% identity at the nucleotide level) to the tcbR-CDEF genes on plasmid pP51 of the 1,2,4-trichlorobenzene-degrading bacterium Pseudomonas sp. strain P51, which was isolated in The Netherlands. The structure of the operon, including the lengths of open reading frames and intervening sequences, was completely conserved between the cbn and tcb genes. Most nucleotide substitutions were localized within and proximal to the cbnB (tcbD) gene. The difference in the chloroaromatics that the two strains could use as growth substrates seemed to be due to differences in enzymes that convert substrates to chlorocatechols. The restriction map of plasmid pENH91 was clearly different from that of pP51 except in the regions that contained the cbnR-ABCD and tcbR-CDEF genes, respectively, suggesting that the chlorocatechol gene clusters might have been transferred as units. Two homologous sequences, present as direct repeats in both flanking regions of the cbnR-ABCD genes on pENH91, were found to be identical insertion sequences (ISs), designated IS1600, which formed a composite transposon designated Tn5707. Although the tcbR-CDEF genes were not associated with similar ISs, a DNA fragment homologous to IS1600 was cloned from the chromosome of strain P51. The sequence of the fragment suggested that it might be a remnant of an IS. The two sequences, together with IS1326 and nmoT, formed a distinct cluster on a phylogenetic tree of the IS21 family. The diversity of the sources of these IS or IS-like elements suggests the prevalence of ISs of this type.

Bacillus thuringiensis and its pesticidal crystal proteins

During the past decade the pesticidal bacterium Bacillus thuringiensis has been the subject of intensive research. These efforts have yielded considerable data about the complex relationships between the structure, mechanism of action, and genetics of the organism's pesticidal crystal proteins, and a coherent picture of these relationships is beginning to emerge. Other studies have focused on the ecological role of the B. thuringiensis crystal proteins, their performance in agricultural and other natural settings, and the evolution of resistance mechanisms in target pests. Armed with this knowledge base and with the tools of modern biotechnology, researchers are now reporting promising results in engineering more-useful toxins and formulations, in creating transgenic plants that express pesticidal activity, and in constructing integrated management strategies to insure that these products are utilized with maximum efficiency and benefit.

Characterization of plasmid pAW63, a second self-transmissible plasmid in Bacillus thuringiensis subsp. kurstaki HD73

Bacillus thuringiensis subspecies kurstaki HD73, toxic for lepidopteran larvae, contains two large self-transmissible plasmids of approximately 75 kb, pHT73 and pAW63. The conjugative plasmid pHT73 has been studied extensively and has been shown to harbour the toxin gene cry1Ac, the transposon Tn4430 and several insertion sequences. In this study it was demonstrated that the minor plasmid pAW63 is also self-transmissible and about 10-30 times more efficient in mobilizing plasmid pBC16. To facilitate direct selection for pAW63 transfer, the plasmid was tagged with the tetracycline resistance transposon Tn5401 and in intraspecies matings it was found that after 2 h, all recipients had acquired a copy of the plasmid. Mating experiments demonstrated that pAW63 could be transferred to Bacillus thuringiensis subsp. israelensis, Bacillus cereus, Bacillus licheniformis, Bacillus subtilis and Bacillus sphaericus, and that the conjugative functions were expressed in these hosts. Hybridization studies showed that the replicons of pAW63 and pHT73 were distinct from one another. Sequences homologous to transposon Tn4430 and several insertion sequences were, however, shown to reside on both plasmids.

ISRm4-1 and ISRm9, two novel insertion sequences from Sinorhizobium meliloti

Two novel insertion sequences, ISRm4-1 and ISRm9 have been identified in Sinorhizobium meliloti. ISRm4-1 is 936-bp in length, flanked by 17-bp putative terminal inverted repeats and a putative target duplication of 3-bp. ISRm4-1 is a member of the IS5 family of insertion sequences, closely related to ISRm4. ISRm9 is 2797-bp in length and carries 25-bp inverted repeats with target duplication of 7-bp: ISRm9 belongs to the IS21 family of insertion elements. On the non-pSym plasmid pRmeGR4b from S. meliloti strain GR4, a copy of ISRm4-1 is interrupted at nucleotide 150 from its 5'-end by a copy of ISRm9. Whereas ISRm4-like elements are widespread in S. meliloti, the distribution of ISRm9 appears to be correlated to that of pRmeGR4b-type plasmids.

Diversity and differential distribution of IS231, IS232 and IS240 among Bacillus cereus, Bacillus thuringiensis and Bacillus mycoides

Bacillus cereus, Bacillus thuringiensis and Bacillus mycoides are very closely related bacteria, generally considered as subspecies of B. cereus sensu lato. Different transposable elements have been isolated from B. thuringiensis, including IS231, IS232 and IS240 and their variants. The distribution of these three insertion sequences (IS) within the B. cereus group has been investigated in 90 strains of B. thuringiensis (representing 61 serovars), in 30 reference strains of B. cereus and in 33 strains of B. mycoides. Since these IS elements are delimited by well-conserved and specific inverted repeats, the use of primers corresponding to these ends allowed their amplification by PCR. The results showed that IS231 is the most abundant element in the three taxa, whereas IS232 is apparently exclusively associated with B. thuringiensis. Hybridization and Dral RFLP analysis of the PCR products confirmed and extended knowledge of the heterogeneity previously observed among iso-IS231 elements. Moreover, a similar diversity was observed among iso-IS240 elements. This contrasted with the relative homogeneity displayed by iso-IS232 elements. No specific association appeared to exist between any particular iso-element and a specific strain or serotype.

Cloning, sequencing, and analysis of a gene cluster from Chelatobacter heintzii ATCC 29600 encoding nitrilotriacetate monooxygenase and NADH:flavin mononucleotide oxidoreductase

Nitrilotriacetate (NTA) is an important chelating agent in detergents and has also been used extensively in processing radionuclides. In Chelatobacter heintzii ATCC 29600, biodegradation of NTA is initiated by NTA monooxygenase that oxidizes NTA to iminodiacetate and glyoxylate. The NTA monooxygenase activity requires two component proteins, component A and component B, but the function of each component is unclear. We have cloned and sequenced a gene cluster encoding components A and B (nmoA and nmoB) and two additional open reading frames, nmoR and nmoT, downstream of nmoA. Based on sequence similarities, nmoR and nmoT probably encode a regulatory protein and a transposase, respectively. The NmoA sequence was similar to a monooxygenase that uses reduced flavin mononucleotide (FMNH2) as reductant; NmoB was similar to an NADH:flavin mononucleotide (FMN) oxidoreductase. On the basis of this information, we tested the function of each component. Purified component B was shown to be an NADH:FMN oxidoreductase, and its activity could be separated from that of component A. When the Photobacterium fischeri NADH:FMN oxidoreductase was substituted for component B in the complete reaction, NTA was oxidized, showing that the substrate specificity of the reaction resides in component A. Component A is therefore an NTA monooxygenase that uses FMNH2 and O2 to oxidize NTA, and component B is an NADH:FMN oxidoreductase that provides FMNH2 for NTA oxidation.

The integrons In0, In2, and In5 are defective transposon derivatives

The class 1 integrons In0, In2, and In5, found in different locations in pVS1, Tn21, and pSCH884, have closely related structures. All three integrons contain an insertion sequence, IS1326, that is a new member of the IS21 family. IS1326 has caused deletions of adjacent 3'-conserved segment and transposition module sequences, and all three integrons retain a complete copy of only one of four genes required for transposition of related transposons and are thus defective transposon derivatives. In2 contains an additional insertion sequence, IS1353, located within IS1326. IS1353 is a member of the IS3 family and appears to have been acquired after the integron was inserted into an ancestral mercury resistance transposon to create the ancestor of Tn21 and several other transposons that are close relatives of Tn21.

Characterization and sequence of a novel insertion sequence, IS1162, from Pseudomonas fluorescens

We have determined the nucleotide sequence of IS1162, a new insertion sequence (IS) isolated from Pseudomonas fluorescens (Pf) strain ST. This IS element is present in two copies on the pEG plasmid harboured by Pf ST and in a single copy on the chromosome, adjacent to the styrene catabolic genes. IS1162 is 2634 bp in length with 12-bp terminal inverted repeats (IR), and could encode four proteins (ORFs), two for each strand. One strand, Pro1 (62,990 Da), showed a helix-turn-helix motif at the N-terminal region, and Pro2 (25,997 Da) was characterized by the presence of the A and B motives of the NTP (ATP/GTP)-binding site. Comparison of IS1162 of Pf with known IS showed a high homology with IS408 of Burkholderia cepacia [Byrne and Lessie, Plasmid 31 (1994) 138-147]. Pro1 and Pro2 were found to be homologous to the corresponding ORFs of IS408, IS21 [Reimmann et al., Mol. Gen. Genet. 215 (1989) 416-424], IS232 [Menou et al., J. Bacteriol. 172 (1990) 6689-6696] and IS5376 [Xu et al., Plasmid 29 (1993) 1-9]. IS1162 transposed at low frequency and no cointegrates were found among the transposition products. The target duplication sites, variable in length, showed the presence of homologous motives, suggesting a certain degree of specificity of the IS1162 insertion site.

Nucleotide sequence and structural organization of Yersinia pestis insertion sequence IS100

Insertion sequence IS100 was localized on a 9.5-kb plasmid of Yersinia pestis and was shown to be specific for Y. pestis and serotype I strains of Y. pseudotuberculosis. The nucleotide sequence of IS100 isolated from this plasmid was determined. The element, which was flanked by 5-bp direct repeats, contained 1953 bp including imperfect inverted terminal repeats of 52 and 61 bp long (43 bp were identical). Two open reading frames encoding potential polypeptides of 340 and 252 amino acids were identified on one DNA strand. Nucleotide sequence as well as deduced polypeptide sequences of IS100 were homologous to those of IS21, IS232 and IS640.

Tn5401, a new class II transposable element from Bacillus thuringiensis

A new class II (Tn3-like) transposable element, designated Tn5401, was recovered from a sporulation-deficient variant of Bacillus thuringiensis subsp. morrisoni EG2158 following its insertion into a recombinant plasmid. Sequence analysis of the insert revealed a 4,837-bp transposon with two large open reading frames, in the same orientation, encoding proteins of 36 kDa (306 residues) and 116 kDa (1,005 residues) and 53-bp terminal inverted repeats. The deduced amino acid sequence for the 36-kDa protein shows 24% sequence identity with the TnpI recombinase of the B. thuringiensis transposon Tn4430, a member of the phage integrase family of site-specific recombinases. The deduced amino acid sequence for the 116-kDa protein shows 42% sequence identity with the transposase of Tn3 but only 28% identity with the TnpA transposase of Tn4430. Two small open reading frames of unknown function, designated orf1 (85 residues) and orf2 (74 residues), were also identified. Southern blot analysis indicated that Tn5401, in contrast to Tn4430, is not commonly found among different subspecies of B. thuringiensis and is not typically associated with known insecticidal crystal protein genes. Transposition was studied with B. thuringiensis by using plasmid pEG922, a temperature-sensitive shuttle vector containing Tn5401. Tn5401 transposed to both chromosomal and plasmid target sites but displayed an apparent preference for plasmid sites. Transposition was replicative and resulted in the generation of a 5-bp duplication at the target site. Transcriptional start sites within Tn5401 were mapped by primer extension analysis. Two promoters, designated PL and PR, direct the transcription of orf1-orf2 and tnpI-tnpA, respectively, and are negatively regulated by TnpI. Sequence comparison of the promoter regions of Tn5401 and Tn4430 suggests that the conserved sequence element ATGTCCRCTAAY mediates TnpI binding and cointegrate resolution. The same element is contained within the 53-bp terminal inverted repeats, thus accounting for their unusual lengths and suggesting an additional role for TnpI in regulating Tn5401 transposition.

IS231 and other Bacillus thuringiensis transposable elements: a review

Bacillus thuringiensis is an entomopathogenic bacterium whose toxicity is due to the presence in the sporangia of delta-endotoxin crystals active against agricultural pests and vectors of human and animal diseases. Most of the genes coding for these toxin proteins are plasmid-borne and are generally structurally associated with insertion sequences (IS231, IS232, IS240, ISBT1 and ISBT2) and transposons (Tn4430 and Tn5401). Several of these mobile elements have been shown to be active and are believed to participate in the crystal gene mobility, thereby contributing to the variation of bacterial toxicity. Structural analysis of the iso-IS231 elements indicates that they are related to IS1151 from Clostridium perfringens and distantly related to IS4 and IS186 from Escherichia coli. Like the other IS4 family members, they contain a conserved transposase-integrase motif found in other IS families and retroviruses. Moreover, functional data gathered from IS231A in Escherichia coli indicate a non-replicative mode of transposition, with a marked preference for specific targets. Similar results were also obtained in Bacillus subtilis and B. thuringiensis, and a working model for DNA-protein interactions at the target site is proposed.

Characterization and properties of a novel plasmid vector for Bacillus thuringiensis displaying compatibility with host plasmids

A novel plasmid vector, composed of a 1.7-kb Bacillus thuringiensis (B.t.) replicon, a multiple cloning site, and an erythromycin-resistance marker gene from Bacillus subtilis, was constructed for use in B.t. Unlike other vectors which have been reported to be acceptable for B.t., this new B.t. vector was stably maintained in the absence of Er and did not displace host plasmids, some of which carry crystal protein-encoding genes (cry genes). The compatibility of this B.t. vector with native plasmids is highly desirable when introducing new cry genes into a wild-type B.t. strain. When a cryIIIA gene of B.t. tenebrionis was cloned in this vector and introduced into B.t. kurstaki (kur) HD119, cryIIIA was highly expressed without affecting the level of expression of native cry genes. The stability of this vector and its compatibility with native B.t. plasmids were achieved by subcloning only nucleotide sequences required for the vector to replicate in B.t. The origin of replication was first cloned on a 9.6-kb Bg/II fragment from a 75-kb plasmid of B.t. kur HD73 and then localized to a 2.4-kb region within the 9.6-kb fragment. Sequencing of the 2.4-kb region revealed the presence of an open reading frame (ORF), encoding a putative 312-amino acid (aa) protein. The deduced aa sequence of the ORF showed no homology to any published aa sequences. Deletion analysis indicated that the B.t. vector required at least the ORF and up to 300 bp surrounding the ORF, in order to replicate.

Expansion of insecticidal host range of Bacillus thuringiensis by in vivo genetic recombination

We describe a novel approach for the insertion of an insecticidal toxin gene into a resident plasmid in Bacillus thuringiensis (Bt). A gene encoding a coleopteran-specific toxin was cloned within a fragment of IS232 and inserted into a plasmid thermosensitive for replication in Bt. The plasmid was used to transform a Bt strain toxic to lepidoptera, and the transformants were then selected at non-permissive temperature for clones in which the vector had integrated into a copy of IS232 present on a resident plasmid. A second recombination event was selected such that the vector was eliminated and the newly introduced toxin gene was conserved. The resulting strain contained only DNA of Bt origin, and displayed insecticidal activity against both lepidoptera and coleoptera.

IS231D, E and F, three new insertion sequences in Bacillus thuringiensis: extension of the IS231 family

IS231 constitutes a family of insertion sequences widespread among Bacillus thuringiensis subspecies. Three new IS231 variants have been isolated from B. thuringiensis subspecies finitimus (IS231 D and E) and israelensis (IS231F). Like the previously described IS231A, B and C, these 1.7 kb elements display single open reading frames encoding 477/478-amino-acid proteins which share between 72% and 88% identity with those of the other members of the family. Sequence comparisons also reveal that all the iso-IS231 terminal inverted repeats are strongly conserved 20 bp sequences. A region susceptible to forming a stable hairpin structure is found just upstream of the open reading frame. Nucleotide substitutions occurring on one strand of the hairpin stems are compensated for by complementary changes at facing positions, giving credence to the hypothesis that this secondary structure plays a role in the regulation of transposition. Examination of IS231 D, E and F flanking sequences reveals that IS231F is bordered by a 12 bp direct repeat. No direct repeats were found flanking IS231D or IS231E.

IS231A from Bacillus thuringiensis is functional in Escherichia coli: transposition and insertion specificity

A kanamycin resistance gene was introduced within the insertion sequence IS231A from Bacillus thuringiensis, and transposition of the element was demonstrated in Escherichia coli. DNA sequencing at the target sites showed that IS231A transposition results in direct repeats of variable lengths (10, 11, and 12 bp). These target sequences resemble the terminal inverted repeats of the transposon Tn4430, which are the preferred natural insertion sites of IS231 in B. thuringiensis.