Does bleach processing increase the accuracy of sputum smear microscopy for diagnosing pulmonary tuberculosis?

Performance of Bleach Method Sputum Smear Microscopy for the Diagnosis of Tuberculosis in a Highly Endemic District in Lima, Peru

Background: Sputum smear microscopy (SSM) is a screening test used to diagnose tuberculosis (TB); however, its performance and sensitivity are relatively low, which can lead to false negatives. We designed a cross-sectional study to estimate the performance of SSM that includes a pretreatment based on sputum digestion with bleach (sodium hypochlorite) for the diagnosis of TB. Methods: We evaluated 73 sputum samples from patients with a diagnosis of TB confirmed by the Xpert MTB/RIF test and 114 samples from patients without TB. We performed sputum digestion using a 5% sodium hypochlorite solution, centrifuged at 2000 rpm for 15 min. We prepared smears for direct and bleach-treated SSM and used Ziehl−Neelsen staining. Results: The bleach-treated SSM obtained absolute identification of the cases of TB confirmed by the Xpert test, compared to 95.9% identified by the direct smear method (without bleach treatment). We also found a significant increase (p < 0.001) in the recovery of acid-fast bacilli (AFB) obtained by the bleach-treated SSM (293.8 ± 215.1 AFB) compared to the direct SSM method (222.9 ± 195.5 AFB). The AUC of the bleach-treated SSM and direct SSM was 100% and 96.6%, respectively. Conclusion: The bleach-treated SSM performs better than the direct SSM in identifying AFB and increasing the bacillary count in the sputum samples.

Symptom- and chest-radiography screening for active pulmonary tuberculosis in HIV-negative adults and adults with unknown HIV status

BACKGROUND

Systematic screening in high-burden settings is recommended as a strategy for early detection of pulmonary tuberculosis disease, reducing mortality, morbidity and transmission, and improving equity in access to care. Questioning for symptoms and chest radiography (CXR) have historically been the most widely available tools to screen for tuberculosis disease. Their accuracy is important for the design of tuberculosis screening programmes and determines, in combination with the accuracy of confirmatory diagnostic tests, the yield of a screening programme and the burden on individuals and the health service.

OBJECTIVES

To assess the sensitivity and specificity of questioning for the presence of one or more tuberculosis symptoms or symptom combinations, CXR, and combinations of these as screening tools for detecting bacteriologically confirmed pulmonary tuberculosis disease in HIV-negative adults and adults with unknown HIV status who are considered eligible for systematic screening for tuberculosis disease. Second, to investigate sources of heterogeneity, especially in relation to regional, epidemiological, and demographic characteristics of the study populations.

SEARCH METHODS

We searched the MEDLINE, Embase, LILACS, and HTA (Health Technology Assessment) databases using pre-specified search terms and consulted experts for unpublished reports, for the period 1992 to 2018. The search date was 10 December 2018. This search was repeated on 2 July 2021.

SELECTION CRITERIA

Studies were eligible if participants were screened for tuberculosis disease using symptom questions, or abnormalities on CXR, or both, and were offered confirmatory testing with a reference standard. We included studies if diagnostic two-by-two tables could be generated for one or more index tests, even if not all participants were subjected to a microbacteriological reference standard. We excluded studies evaluating self-reporting of symptoms.

DATA COLLECTION AND ANALYSIS

We categorized symptom and CXR index tests according to commonly used definitions. We assessed the methodological quality of included studies using the QUADAS-2 instrument. We examined the forest plots and receiver operating characteristic plots visually for heterogeneity. We estimated summary sensitivities and specificities (and 95% confidence intervals (CI)) for each index test using bivariate random-effects methods. We analyzed potential sources of heterogeneity in a hierarchical mixed-model.

MAIN RESULTS

The electronic database search identified 9473 titles and abstracts. Through expert consultation, we identified 31 reports on national tuberculosis prevalence surveys as eligible (of which eight were already captured in the search of the electronic databases), and we identified 957 potentially relevant articles through reference checking. After removal of duplicates, we assessed 10,415 titles and abstracts, of which we identified 430 (4%) for full text review, whereafter we excluded 364 articles. In total, 66 articles provided data on 59 studies. We assessed the 2 July 2021 search results; seven studies were potentially eligible but would make no material difference to the review findings or grading of the evidence, and were not added in this edition of the review. We judged most studies at high risk of bias in one or more domains, most commonly because of incorporation bias and verification bias. We judged applicability concerns low in more than 80% of studies in all three domains. The three most common symptom index tests, cough for two or more weeks (41 studies), any cough (21 studies), and any tuberculosis symptom (29 studies), showed a summary sensitivity of 42.1% (95% CI 36.6% to 47.7%), 51.3% (95% CI 42.8% to 59.7%), and 70.6% (95% CI 61.7% to 78.2%, all very low-certainty evidence), and a specificity of 94.4% (95% CI 92.6% to 95.8%, high-certainty evidence), 87.6% (95% CI 81.6% to 91.8%, low-certainty evidence), and 65.1% (95% CI 53.3% to 75.4%, low-certainty evidence), respectively. The data on symptom index tests were more heterogenous than those for CXR. The studies on any tuberculosis symptom were the most heterogeneous, but had the lowest number of variables explaining this variation. Symptom index tests also showed regional variation. The summary sensitivity of any CXR abnormality (23 studies) was 94.7% (95% CI 92.2% to 96.4%, very low-certainty evidence) and 84.8% (95% CI 76.7% to 90.4%, low-certainty evidence) for CXR abnormalities suggestive of tuberculosis (19 studies), and specificity was 89.1% (95% CI 85.6% to 91.8%, low-certainty evidence) and 95.6% (95% CI 92.6% to 97.4%, high-certainty evidence), respectively. Sensitivity was more heterogenous than specificity, and could be explained by regional variation. The addition of cough for two or more weeks, whether to any (pulmonary) CXR abnormality or to CXR abnormalities suggestive of tuberculosis, resulted in a summary sensitivity and specificity of 99.2% (95% CI 96.8% to 99.8%) and 84.9% (95% CI 81.2% to 88.1%) (15 studies; certainty of evidence not assessed).

AUTHORS' CONCLUSIONS

The summary estimates of the symptom and CXR index tests may inform the choice of screening and diagnostic algorithms in any given setting or country where screening for tuberculosis is being implemented. The high sensitivity of CXR index tests, with or without symptom questions in parallel, suggests a high yield of persons with tuberculosis disease. However, additional considerations will determine the design of screening and diagnostic algorithms, such as the availability and accessibility of CXR facilities or the resources to fund them, and the need for more or fewer diagnostic tests to confirm the diagnosis (depending on screening test specificity), which also has resource implications. These review findings should be interpreted with caution due to methodological limitations in the included studies and regional variation in sensitivity and specificity. The sensitivity and specificity of an index test in a specific setting cannot be predicted with great precision due to heterogeneity. This should be borne in mind when planning for and implementing tuberculosis screening programmes.

Neoteric advancements in TB diagnostics and its future frame

Tuberculosis (TB) is one of the major infectious disease that causes threat to human health and leads to death in most of the cases. Mycobacterium tuberculosis is the causative agent that can affect both pulmonary and extra pulmonary regions of the body. This infection can be presented either as an active or latent form in the patients. Although this disease has been declared curable and preventable by WHO, it still holds its position as a global emergency. Over the past decade many hurdles such as low immunity, co-infections like HIV, autoimmune disorders, poverty, malnutrition and emerging trends in drug resistance patterns are hindering the eradication of this infection. However, many programmes have been launched by WHO with involvement of governments at various level to put a full stop over the disease. Under the Revised National Tuberculosis Control Programme (RNTCP) which was recently renamed as National Tuberculosis Elimination Programme (NTEP), the major focus is on eliminating tuberculosis by the year 2025. The main aim of the programme is to identify feasible quality testing, evaluate through NIKSHYA poshak yozana, restrict through BCG vaccination and assemble with public awareness to eradicate MTB. Numerous novel diagnostic techniques and molecular tools have been developed to elucidate and differentiate report of various suspected and active tuberculosis patients. However, improvements are still required to cut short the duration of the overall process ranging from screening of patients to their successful treatment.

Added value of bleach for tuberculosis microscopy diagnostic in limited resources setting

Indonesia is one of the high burden tuberculosis (TB) countries. The utilization of molecular diagnostic has been setting over the country, however there are still a lot of remote areas that only depend on microscopic smear. Bleach might be used to increase the value of microscopy diagnostic. The study aimed to evaluate the added value of 1% bleach to increase the positivity rate of TB compared to conventional stain. This study was conducted on 70 subjects who were suspected as TB from various primary care centers in West Java and Banten, Indonesia. The sputum was 2-3 mL, and divided into two parts, both of them were stained using Ziehl-Neelsen (ZN), however the first was only stained and the second added 1% bleach. Bleach was added in same volume with sputum and incubated for 10 minutes. After 10 minutes, the sputum was stained with ZN. The positivity rate for ZN only was 39 (55.7%) compared to 1% bleach was 63 (90%), and significantly different (P=0.000) using Mann-Whitney U test. Bleach can be used as an alternative agent to improve the TB smear in setting that only depends on microscopy diagnostic.

Use of sodium dodecyl sulfate to improve tuberculosis sputum smear microscopy

Sputum smear microscopy (SSM), the most widely available tool for tuberculosis (TB) detection, has limited performance in paucibacillary patients and requires highly experienced technicians. The objective of this study was to determine whether the addition of sodium dodecyl sulfate (SDS), a detergent that thins sputum, at 4% and 10%, improves the detection of acid-fast bacilli (AFB), the clarity of slides, and the biosafety of the technique. Thirty participants with presumptive TB were enrolled. Three independent, blinded technicians examined the slides. Regular sputum concentrated AFB smear and sputum culture were used as standard control methods. Sputum culture was also performed before and after 10% SDS addition for safety analysis. We found that neither SSM with SDS 4% nor SSM with SDS 10% improved the test's performance. However, slides with 4% and 10% SDS, compared with slides prepared without SDS, had significantly better clarity scores. The 10% SDS-prepared sputum samples were all culture negative. While adding SDS detergent does not improve the performance of SSM slides, it does improve the clarity and biosafety. Where experienced technicians are scarce, especially in low resource settings, use of SDS may enhance the ease of slide reading in sputum smear microscopy.

Smear Microscopy for Diagnosis of Pulmonary Tuberculosis in Eastern Sudan

Background

In Sudan, tuberculosis diagnosis largely relies on clinical symptoms and smear microscopy as in many other low- and middle-income countries. The aim of this study was to investigate the positive predictive value of a positive sputum smear in patients investigated for pulmonary tuberculosis in Eastern Sudan.

Methods

Two sputum samples from patients presenting with symptoms suggestive of tuberculosis were investigated using direct Ziehl-Neelsen (ZN) staining and light microscopy between June to October 2014 and January to July 2016. If one of the samples was smear positive, both samples were pooled, stored at −20°C, and sent to the National Reference Laboratory (NRL), Germany. Following decontamination, samples underwent repeat microscopy and culture. Culture negative/contaminated samples were investigated using polymerase chain reaction (PCR).

Results

A total of 383 samples were investigated. Repeat microscopy categorized 123 (32.1%) as negative, among which 31 were culture positive. This increased to 80 when PCR and culture results were considered together. A total of 196 samples were culture positive, of which 171 (87.3%), 14 (7.1%), and 11 (5.6%) were M. tuberculosis, M. intracellulare, and mixed species. Overall, 15.6% (57/365) of the samples had no evidence of M. tuberculosis, resulting in a positive predictive value of 84.4%.

Conclusions

There was a discordance between the results of smear microscopy performed at local laboratories in the Sudan and at the NRL, Germany; besides, a considerable number of samples had no evidence of M. tuberculosis. Improved quality control for smear microscopy and more specific diagnostics are crucial to avoid possible overtreatment.

Spot sputum samples are at least as good as early morning samples for identifying Mycobacterium tuberculosis

BACKGROUND

The use of early morning sputum samples (EMS) to diagnose tuberculosis (TB) can result in treatment delay given the need for the patient to return to the clinic with the EMS, increasing the chance of patients being lost during their diagnostic workup. However, there is little evidence to support the superiority of EMS over spot sputum samples. In this new analysis of the REMoxTB study, we compare the diagnostic accuracy of EMS with spot samples for identifying Mycobacterium tuberculosis pre- and post-treatment.

METHODS

Patients who were smear positive at screening were enrolled into the study. Paired sputum samples (one EMS and one spot) were collected at each trial visit pre- and post-treatment. Microscopy and culture on solid LJ and liquid MGIT media were performed on all samples; those missing corresponding paired results were excluded from the analyses.

RESULTS

Data from 1115 pre- and 2995 post-treatment paired samples from 1931 patients enrolled in the REMoxTB study were analysed. Patients were recruited from South Africa (47%), East Africa (21%), India (20%), Asia (11%), and North America (1%); 70% were male, median age 31 years (IQR 24-41), 139 (7%) co-infected with HIV with a median CD4 cell count of 399 cells/μL (IQR 318-535). Pre-treatment spot samples had a higher yield of positive Ziehl-Neelsen smears (98% vs. 97%, P = 0.02) and LJ cultures (87% vs. 82%, P = 0.006) than EMS, but there was no difference for positivity by MGIT (93% vs. 95%, P = 0.18). Contaminated and false-positive MGIT were found more often with EMS rather than spot samples. Surprisingly, pre-treatment EMS had a higher smear grading and shorter time-to-positivity, by 1 day, than spot samples in MGIT culture (4.5 vs. 5.5 days, P < 0.001). There were no differences in time to positivity in pre-treatment LJ culture, or in post-treatment MGIT or LJ cultures. Comparing EMS and spot samples in those with unfavourable outcomes, there were no differences in smear or culture results, and positive results were not detected earlier in Kaplan-Meier analyses in either EMS or spot samples.

CONCLUSIONS

Our data do not support the hypothesis that EMS samples are superior to spot sputum samples in a clinical trial of patients with smear positive pulmonary TB. Observed small differences in mycobacterial burden are of uncertain significance and EMS samples do not detect post-treatment positives any sooner than spot samples.

Field evaluation of a blood based test for active tuberculosis in endemic settings

Over 9 million new active tuberculosis (TB) cases emerge each year from an enormous pool of 2 billion individuals latently infected with Mycobacterium tuberculosis (M. tb.) worldwide. About 3 million new TB cases per year are unaccounted for, and 1.5 million die. TB, however, is generally curable if diagnosed correctly and in a timely manner. The current diagnostic methods for TB, including state-of-the-art molecular tests, have failed in delivering the capacity needed in endemic countries to curtail this ongoing pandemic. Efficient, cost effective and scalable diagnostic approaches are critically needed. We report a multiplex TB serology panel using microbead suspension array containing a combination of 11 M.tb. antigens that demonstrated overall sensitivity of 91% in serum/plasma samples from TB patients confirmed by culture. Group wise sensitivities for sputum smear positive and negative patients were 95%, and 88%, respectively. Specificity of the test was 96% in untreated COPD patients and 91% in general healthy population. The sensitivity of this test is superior to that of the frontline sputum smear test with a comparable specificity (30–70%, and 93–99%, respectively). The multiplex serology test can be performed with scalability from 1 to 360 patients per day, and is amenable to automation for higher (1000s per day) throughput, thus enabling a scalable clinical work flow model for TB endemic countries. Taken together, the above results suggest that well defined antibody profiles in blood, analyzed by an appropriate technology platform, offer a valuable approach to TB diagnostics in endemic countries.

Performance of the BacT Alert 3D System Versus Solid Media for Recovery and Drug Susceptibility Testing of Mycobacterium tuberculosis in a Tertiary Hospital in Korea

Background

Tuberculosis (TB) is a major health problem, and accurate and rapid diagnosis of multidrug-resistant (MDR) and extended drug-resistant (XDR) TB is important for appropriate treatment. In this study, performances of solid and liquid culture methods were compared with respect to MDR- and XDR-TB isolate recovery and drug susceptibility testing.

Methods

Sputum specimens from 304 patients were stained with Ziehl-Neelsen method. Mycobacterium tuberculosis (Mtb) isolates were tested for recovery on Löwenstein-Jensen (LJ) medium and the BacT Alert 3D system. For drug susceptibility testing of Mtb, isolates were evaluated on M-KIT plates and the BacT Alert 3D system.

Results

The recovery rates were 94.9% (206/217) and 98.2% (213/217) for LJ medium and the BacT Alert 3D system, respectively (kappa coefficient, 0.884). The rate of drug resistance was 13.4% for at least one or more drugs, 6.0% for MDR-TB and 2.3% for XDR-TB. M-KIT plate and BacT 3D Alert 3D system were comparable in drug susceptibility testing for isoniazid (97.7%; kappa coefficient, 0.905) and rifampin (98.6%; kappa coefficient, 0.907). Antibiotic resistance was observed using M-KIT plates for 24 of the total 29 Mtb isolates (82.8%).

Conclusion

The liquid culture system showed greater reduction in the culture period, as compared with LJ medium; however, drug susceptibility testing using M-KIT plates was advantageous for simultaneous testing against multiple drug targets.

Laboratory Diagnosis of Central Nervous System Infection

Central nervous system (CNS) infections are potentially life threatening if not diagnosed and treated early. The initial clinical presentations of many CNS infections are non-specific, making a definitive etiologic diagnosis challenging. Nucleic acid in vitro amplification-based molecular methods are increasingly being applied for routine microbial detection. These methods are a vast improvement over conventional techniques with the advantage of rapid turnaround and higher sensitivity and specificity. Additionally, molecular methods performed on cerebrospinal fluid samples are considered the new gold standard for diagnosis of CNS infection caused by pathogens, which are otherwise difficult to detect. Commercial diagnostic platforms offer various monoplex and multiplex PCR assays for convenient testing of targets that cause similar clinical illness. Pan-omic molecular platforms possess potential for use in this area. Although molecular methods are predicted to be widely used in diagnosing and monitoring CNS infections, results generated by these methods need to be carefully interpreted in combination with clinical findings. This review summarizes the currently available armamentarium of molecular assays for diagnosis of central nervous system infections, their application, and future approaches.

Current trends and intricacies in the management of HIV-associated pulmonary tuberculosis

Human immunodeficiency virus (HIV) epidemic has undoubtedly increased the incidence of tuberculosis (TB) globally, posing a formidable global health challenge affecting 1.2 million cases. Pulmonary TB assumes utmost significance in the programmatic perspective as it is readily transmissible as well as easily diagnosable. HIV complicates every aspect of pulmonary tuberculosis from diagnosis to treatment, demanding a different approach to effectively tackle both the diseases. In order to control these converging epidemics, it is important to diagnose early, initiate appropriate therapy for both infections, prevent transmission and administer preventive therapy. Liquid culture methods and nucleic acid amplification tests for TB confirmation have replaced conventional solid media, enabling quicker and simultaneous detection of mycobacterium and its drug sensitivity profile Unique problems posed by the syndemic include Acquired rifampicin resistance, drug-drug interactions, malabsorption of drugs and immune reconstitution inflammatory syndrome or paradoxical reaction that complicate dual and concomitant therapy. While the antiretroviral therapy armamentarium is constantly reinforced by discovery of newer and safer drugs every year, only a few drugs for anti tuberculosis treatment have successfully emerged. These include bedaquiline, delamanid and pretomanid which have entered phase III B trials and are also available through conditional access national programmes. The current guidelines by WHO to start Antiretroviral therapy irrespective of CD4+ cell count based on benefits cited by recent trials could go a long way in preventing various complications caused by the deadly duo. This review provides a consolidated gist of the advancements, concepts and updates that have emerged in the management of HIV-associated pulmonary TB for maximizing efficacy, offering latest solutions for tackling drug-drug interactions and remedial measures for immune reconstitution inflammatory syndrome.

Magnetic Multivalent Trehalose Glycopolymer Nanoparticles for the Detection of Mycobacteria

A multivalent trehalose-grafted poly(lactic acid) is synthesized and encapsulated with iron oxide magnetic nanoparticles. The magnetic micelles interact with Mycobacterium smegmatis to form orange clusters. Very little particle interaction is found on Staphylococcus epidermidis 35984 or Escherichia coli ORN 208. The presented new approach to the detection of mycobacteria does not require molecular biology reagents or sophisticated instruments.

Bleach processed smear for Acid fast bacilli staining in Papua New Guinea

The conventional method of processing sputum for acid fast bacilli microscopy has been a primary tool for laboratory diagnosis of pulmonary tuberculosis in Papua New Guinea. In routine preparation, untreated sputum is directly smeared on a glass slide without undergoing any stage of processing. Mounting evidence suggests that direct smearing is less sensitive and, to a certain degree, compromises infection control. A few alternatives for processing sputum have been recommended in the literature; however, their consumables are not easily accessible and are expensive for wide use in rural laboratories. The bleach concentration and processing method appears to be the most preferable choice because bleach is inexpensive, readily available, and has bactericidal properties.

Improved sensitivity, safety and laboratory turnaround time in the diagnosis of pulmonary tuberculosis by use of bleach sedimentation

Background

Inadequate diagnostic processes and human resources in laboratories contribute to a high burden of tuberculosis (TB) in low- and middle-income countries. Direct smear microscopy is relied on for TB diagnosis; however, sensitivity rates vary. To improve sensitivity of direct microscopy, the researchers employed several approaches, including sputum digestion and concentration of acid-fast bacilli (AFB), a technique which uses commercial bleach.

Objectives

This study compared methods used to diagnose active Mycobacterium tuberculosis infections.

Methods

Three sputum specimens were collected from each of 340 participants in Abuja, Nigeria, over two consecutive days. Direct microscopy was performed on all specimens; following microscopy, one specimen from each patient was selected randomly for bleach sedimentation and one for Lowenstein-Jensen culture.

Results

Direct microscopy produced 28.8% AFB-positive results, whilst bleach sedimentation resulted in 30.3%. When compared with the cultures, 26.5% were AFB true positive using direct microscopy and 27.1% using bleach sedimentation. Whilst the specificity rate between these two methods was not statistically significant (P = 0.548), the sensitivity rate was significant (P = 0.004).

Conclusion

Based on these results, bleach increases the sensitivity of microscopy compared with direct smear and has similar specificity. When diagnosing new cases of pulmonary TB, one bleach-digested smear is as sensitive as three direct smears, reducing waiting times for patients and ensuring the safety of laboratory technicians.

Detection of Mycobacterium tuberculosis in extrapulmonary biopsy samples using PCR targeting IS6110, rpoB, and nested-rpoB PCR Cloning

Present study was aimed to examine the diagnostic utility of polymerase chain reaction (PCR) and nested PCR techniques for the detection of Mycobacterium tuberculosis (MTB) DNA in samples from patients with extra pulmonary tuberculosis (EPTB). In total 80 formalin-fixed, paraffin-embedded (FFPE) samples comprising 70 samples with definite diagnosis of EPTB and 10 samples from known non- EPTB on the basis of histopathology examination, were included in the study. PCR amplification targeting IS6110, rpoB gene and nested PCR targeting the rpoB gene were performed on the extracted DNAs from 80 FFPE samples. The strong positive samples were directly sequenced. For negative samples and those with weak band in nested-rpoB PCR, TA cloning was performed by cloning the products into the plasmid vector with subsequent sequencing. The 95% confidence intervals (CI) for the estimates of sensitivity and specificity were calculated for each method. Fourteen (20%), 34 (48.6%), and 60 (85.7%) of the 70 positive samples confirmed by histopathology, were positive by rpoB-PCR, IS6110-PCR, and nested-rpoB PCR, respectively. By performing TA cloning on samples that yielded weak (n = 8) or negative results (n = 10) in the PCR methods, we were able to improve their quality for later sequencing. All samples with weak band and 7 out of 10 negative samples, showed strong positive results after cloning. So nested-rpoB PCR cloning revealed positivity in 67 out of 70 confirmed samples (95.7%). The sensitivity of these combination methods was calculated as 95.7% in comparison with histopathology examination. The CI for sensitivity of the PCR methods were calculated as 11.39-31.27% for rpoB-PCR, 36.44-60.83% for IS6110- PCR, 75.29-92.93% for nested-rpoB PCR, and 87.98-99.11% for nested-rpoB PCR cloning. The 10 true EPTB negative samples by histopathology, were negative by all tested methods including cloning and were used to calculate the specificity of the applied methods. The CI for 100% specificity of each PCR method were calculated as 69.15-100%. Our results indicated that nested-rpoB PCR combined with TA cloning and sequencing is a preferred method for the detection of MTB DNA in EPTB samples with high sensitivity and specificity which confirm the histopathology results.

Choosing algorithms for TB screening: a modelling study to compare yield, predictive value and diagnostic burden

Background

To inform the choice of an appropriate screening and diagnostic algorithm for tuberculosis (TB) screening initiatives in different epidemiological settings, we compare algorithms composed of currently available methods.

Methods

Of twelve algorithms composed of screening for symptoms (prolonged cough or any TB symptom) and/or chest radiography abnormalities, and either sputum-smear microscopy (SSM) or Xpert MTB/RIF (XP) as confirmatory test we model algorithm outcomes and summarize the yield, number needed to screen (NNS) and positive predictive value (PPV) for different levels of TB prevalence.

Results

Screening for prolonged cough has low yield, 22% if confirmatory testing is by SSM and 32% if XP, and a high NNS, exceeding 1000 if TB prevalence is ≤0.5%. Due to low specificity the PPV of screening for any TB symptom followed by SSM is less than 50%, even if TB prevalence is 2%. CXR screening for TB abnormalities followed by XP has the highest case detection (87%) and lowest NNS, but is resource intensive. CXR as a second screen for symptom screen positives improves efficiency.

Conclusions

The ideal algorithm does not exist. The choice will be setting specific, for which this study provides guidance. Generally an algorithm composed of CXR screening followed by confirmatory testing with XP can achieve the lowest NNS and highest PPV, and is the least amenable to setting-specific variation. However resource requirements for tests and equipment may be prohibitive in some settings and a reason to opt for symptom screening and SSM. To better inform disease control programs we need empirical data to confirm the modeled yield, cost-effectiveness studies, transmission models and a better screening test.

Electronic supplementary material

The online version of this article (doi:10.1186/1471-2334-14-532) contains supplementary material, which is available to authorized users.

Demonstration of mycobacterium tuberculosis in sputum and saliva smears of tuberculosis patients using ziehl neelsen and flurochrome staining- a comparative study

BACKGROUND

Early detection of tuberculosis is important for reducing its morbidity and mortality especially in the patients with non-productive cough. To overcome the cumbersome process involved in collection and processing of the sputum specimen, the time consumed for reporting of sputum by Ziehl Neelsen (ZN) method and to introduce a routine screening test in suspected, symptomless tuberculosis patients, the present study was designed using saliva as diagnostic medium and Auramine Rhodamine (AR) as staining method. On review of literature, there was no study which has tried diagnosing tuberculosis using saliva with flurochrome stain; hence the present study was designed.

AIM

To introduce a routine screening test for tuberculosis patient using saliva and to determine the diagnostic efficacy of routine ZN staining method and AR fluorescent staining method in sputum and saliva smears of pulmonary tuberculosis patients.

SETTINGS AND DESIGN

Laboratory settings and Experimental design.

MATERIALS AND METHOD

Fifty smears samples of sputum and saliva of known cases of pulmonary tuberculosis were stained with routine ZN stain and other with AR fluorescent stain. All the specimens were inoculated into Lowenstein-Jensen culture media. The smears were subjected for scanning of Mycobacterium tuberculous bacilli under X 1000 magnification for ZN stain and X 400 magnification for AR stain by grid pattern proposed by National tuberculosis institute and graded by RNTCP grading system.

RESULTS

All 50 sputum samples showed 100% positivity by ZN and AR stain while only 76% positivity was seen by culture. Of the 50 saliva samples 10% cases were positive by ZN, 76% were positive by AR & 70% by culture method. Statistical analysis using chi square test was done, and the value was found to be statistically highly significant for AR staining technique. (p<0.001) CONCLUSION: Saliva can prove to be an important tool for the diagnosis as well as screening of the patients with pulmonary tuberculosis when aided with flurochrome staining method.

An evaluation of systematic tuberculosis screening at private facilities in Karachi, Pakistan

Background

In Pakistan, like many Asian countries, a large proportion of healthcare is provided through the private sector. We evaluated a systematic screening strategy to identify people with tuberculosis in private facilities in Karachi and assessed the approaches' ability to diagnose patients earlier in their disease progression.

Methods and Findings

Lay workers at 89 private clinics and a large hospital outpatient department screened all attendees for tuberculosis using a mobile phone-based questionnaire during one year. The number needed to screen to detect a case of tuberculosis was calculated. To evaluate early diagnosis, we tested for differences in cough duration and smear grading by screening facility. 529,447 people were screened, 1,010 smear-positive tuberculosis cases were detected and 942 (93.3%) started treatment, representing 58.7% of all smear-positive cases notified in the intervention area. The number needed to screen to detect a smear-positive case was 124 (prevalence 806/100,000) at the hospital and 763 (prevalence 131/100,000) at the clinics; however, ten times the number of individuals were screened in clinics. People with smear-positive TB detected at the hospital were less likely to report cough lasting 2–3 weeks (RR 0.66 95%CI [0.49–0.90]) and more likely to report cough duration >3 weeks (RR 1.10 95%CI [1.03–1.18]). Smear-positive cases at the clinics were less likely to have a +3 grade (RR 0.76 95%CI [0.63–0.92]) and more likely to have +1 smear grade (RR 1.24 95%CI [1.02–1.51]).

Conclusions

Tuberculosis screening at private facilities is acceptable and can yield large numbers of previously undiagnosed cases. Screening at general practitioner clinics may find cases earlier than at hospitals although more people must be screened to identify a case of tuberculosis. Limitations include lack of culture testing, therefore underestimating true TB prevalence. Using more sensitive and specific screening and diagnostic tests such as chest x-ray and Xpert MTB/RIF may improve results.

Advances and challenges in biosensor-based diagnosis of infectious diseases

Rapid diagnosis of infectious diseases and timely initiation of appropriate treatment are critical determinants that promote optimal clinical outcomes and general public health. Conventional in vitro diagnostics for infectious diseases are time-consuming and require centralized laboratories, experienced personnel and bulky equipment. Recent advances in biosensor technologies have potential to deliver point-of-care diagnostics that match or surpass conventional standards in regards to time, accuracy and cost. Broadly classified as either label-free or labeled, modern biosensors exploit micro- and nanofabrication technologies and diverse sensing strategies including optical, electrical and mechanical transducers. Despite clinical need, translation of biosensors from research laboratories to clinical applications has remained limited to a few notable examples, such as the glucose sensor. Challenges to be overcome include sample preparation, matrix effects and system integration. We review the advances of biosensors for infectious disease diagnostics and discuss the critical challenges that need to be overcome in order to implement integrated diagnostic biosensors in real world settings.

Comparison of direct versus concentrated smear microscopy in detection of pulmonary tuberculosis

BACKGROUND

Sputum smear microscopy is fast and inexpensive technique for detecting tuberculosis (TB) in high incidence areas but has low sensitivity. Physical and chemical sputum processing along with centrifugation have been found to show promise in overcoming this limitation. Our objective was to compare the sensitivity of smear microscopy obtained with smears made directly from respiratory specimens to those from concentrated specimens.

METHODS

By active screening, 915 TB suspects were identified from Dhaka Central Jail and sputum specimens were aseptically collected. Direct smears were prepared by taking a small portion of the purulent part of the sputum with a sterile loop. The specimens were then processed by a standard N-acetyl-L-cysteine-NaOH digestion-decontamination method to prepare concentrated specimens. Both smears were then air dried, heat fixed, and stained by the Ziehl-Neelsen staining technique. The stained slides were examined under oil immersion and were graded following International Union Against Tuberculosis and Lung Diseases guidelines. All the specimens were inoculated into Lowenstein-Jensen (L-J) media and culture results were considered as gold standard to calculate sensitivity.

RESULTS

Of 915 specimens, 73 (8%) specimens were positive both on direct and concentrated methods, one sample was positive on direct microscopy but was negative on concentrated method. An extra 14 (1.5%) samples were positive on concentrated method which were negative on direct smear. In L-J media 105 specimens were found positive for TB bacilli and of them, 74 (70.5%) and 87 (82.9%) were positive in direct and concentrated smear, respectively. The sensitivity of direct and concentrated smear microscopy was different when using positive culture as the gold standard (71% vs. 83%).

CONCLUSIONS

The results showed that concentrated technique increases the sensitivity of microscopy up to 12%. Therefore, the national programs in high TB burden countries may consider incorporating the technique into their guidelines at least in the district and higher level laboratories to improve case finding strategy.

Artificial neural networks trained to detect viral and phage structural proteins

Phages play critical roles in the survival and pathogenicity of their hosts, via lysogenic conversion factors, and in nutrient redistribution, via cell lysis. Analyses of phage- and viral-encoded genes in environmental samples provide insights into the physiological impact of viruses on microbial communities and human health. However, phage ORFs are extremely diverse of which over 70% of them are dissimilar to any genes with annotated functions in GenBank. Better identification of viruses would also aid in better detection and diagnosis of disease, in vaccine development, and generally in better understanding the physiological potential of any environment. In contrast to enzymes, viral structural protein function can be much more challenging to detect from sequence data because of low sequence conservation, few known conserved catalytic sites or sequence domains, and relatively limited experimental data. We have designed a method of predicting phage structural protein sequences that uses Artificial Neural Networks (ANNs). First, we trained ANNs to classify viral structural proteins using amino acid frequency; these correctly classify a large fraction of test cases with a high degree of specificity and sensitivity. Subsequently, we added estimates of protein isoelectric points as a feature to ANNs that classify specialized families of proteins, namely major capsid and tail proteins. As expected, these more specialized ANNs are more accurate than the structural ANNs. To experimentally validate the ANN predictions, several ORFs with no significant similarities to known sequences that are ANN-predicted structural proteins were examined by transmission electron microscopy. Some of these self-assembled into structures strongly resembling virion structures. Thus, our ANNs are new tools for identifying phage and potential prophage structural proteins that are difficult or impossible to detect by other bioinformatic analysis. The networks will be valuable when sequence is available but in vitro propagation of the phage may not be practical or possible.

Bacteriophages are extremely abundant and diverse biological entities. All phage particles are comprised of nucleic acids and structural proteins, with few other packaged proteins. Despite their simplicity and abundance, more than 70% of phage sequences in the viral Reference Sequence database encode proteins with unknown function based on FASTA annotations. As a result, the use of sequence similarity is often insufficient for detecting virus structural proteins among unknown viral sequences. Viral structural protein function is challenging to detect from sequence data because structural proteins possess few known conserved catalytic motifs and sequence domains. To address these issues we investigated the use of Artificial Neural Networks as an alternative means of predicting function. Here, we trained thousands of networks using the amino acid frequency of structural protein sequences and identified the optimal architectures with the highest accuracies. Some hypothetical protein sequences detected by our networks were expressed and visualized by TEM, and produced images that strongly resemble virion structures. Our results support the utility of our neural networks in predicting the functions of unknown viral sequences.

Research questions and priorities for tuberculosis: a survey of published systematic reviews and meta-analyses

BACKGROUND

Systematic reviews are increasingly informing policies in tuberculosis (TB) care and control. They may also be a source of questions for future research. As part of the process of developing the International Roadmap for TB Research, we did a systematic review of published systematic reviews on TB, to identify research priorities that are most frequently suggested in reviews.

METHODOLOGY/PRINCIPAL FINDINGS

We searched EMBASE, MEDLINE, Web of Science, and the Cochrane Library for systematic reviews and meta-analyses on any aspect of TB published between 2005 and 2010. One reviewer extracted data and a second reviewer independently extracted data from a random subset of included studies. In total, 137 systematic reviews, with 141 research questions, were included in this review. We used the UK Health Research Classification System (HRCS) to help us classify the research questions and priorities. The three most common research topics were in the area of detection, screening and diagnosis of TB (32.6%), development and evaluation of treatments and therapeutic interventions (23.4%), and TB aetiology and risk factors (19.9%). The research priorities determined were mainly focused on the discovery and evaluation of bacteriological TB tests and drug-resistant TB tests and immunological tests. Other important topics of future research were genetic susceptibility linked to TB and disease determinants attributed to HIV/TB. Evaluation of drug treatments for TB, drug-resistant TB and HIV/TB were also frequently proposed research topics.

CONCLUSIONS

Systematic reviews are a good source of key research priorities. Findings from our survey have informed the development of the International Roadmap for TB Research by the TB Research Movement.

Current developments and future perspectives for TB diagnostics

TB persists as a global epidemic with high morbidity and mortality, especially in low-income countries. It is the only infectious disease ever declared as a global emergency by the WHO. The HIV pandemic and the emergence of drug resistance represent two additional obstacles to better control of the disease. Important progress has been made in the last decade in TB diagnostics. Major needs still exist, such as the availability of a real point-of-care test, a better diagnosis of TB in immune-compromised populations and in children, and the possibility to predict progression to disease in latently infected people. This review will summarize the current developments in TB diagnostics and the perspectives for future developments in the field.

Diagnosis & treatment of tuberculosis in HIV co-infected patients

Human immunodeficiency virus (HIV) associated tuberculosis (TB) remains a major global public health challenge, with an estimated 1.4 million patients worldwide. Co-infection with HIV leads to challenges in both the diagnosis and treatment of tuberculosis. Further, there has been an increase in rates of drug resistant tuberculosis, including multi-drug (MDR-TB) and extensively drug resistant TB (XDRTB), which are difficult to treat and contribute to increased mortality. Because of the poor performance of sputum smear microscopy in HIV-infected patients, newer diagnostic tests are urgently required that are not only sensitive and specific but easy to use in remote and resource-constrained settings. The treatment of co-infected patients requires antituberculosis and antiretroviral drugs to be administered concomitantly; challenges include pill burden and patient compliance, drug interactions, overlapping toxic effects, and immune reconstitution inflammatory syndrome. Also important questions about the duration and schedule of anti-TB drug regimens and timing of antiretroviral therapy remain unanswered. From a programmatic point of view, screening of all HIV-infected persons for TB and vice-versa requires good co-ordination and communication between the TB and AIDS control programmes. Linkage of co-infected patients to antiretroviral treatment centres is critical if early mortality is to be prevented. We present here an overview of existing diagnostic strategies, new tests in the pipeline and recommendations for treatment of patients with HIV-TB dual infection.

Evaluation of bleach-sedimentation for sterilising and concentrating Mycobacterium tuberculosis in sputum specimens

Background

Bleach-sedimentation may improve microscopy for diagnosing tuberculosis by sterilising sputum and concentrating Mycobacterium tuberculosis. We studied gravity bleach-sedimentation effects on safety, sensitivity, speed and reliability of smear-microscopy.

Methods

This blinded, controlled study used sputum specimens (n = 72) from tuberculosis patients. Bleach concentrations and exposure times required to sterilise sputum (n = 31) were determined. In the light of these results, the performance of 5 gravity bleach-sedimentation techniques that sterilise sputum specimens (n = 16) were compared. The best-performing of these bleach-sedimentation techniques involved adding 1 volume of 5% bleach to 1 volume of sputum, shaking for 10-minutes, diluting in 8 volumes distilled water and sedimenting overnight before microscopy. This technique was further evaluated by comparing numbers of visible acid-fast bacilli, slide-reading speed and reliability for triplicate smears before versus after bleach-sedimentation of sputum specimens (n = 25). Triplicate smears were made to increase precision and were stained using the Ziehl-Neelsen method.

Results

M. tuberculosis in sputum was successfully sterilised by adding equal volumes of 15% bleach for 1-minute, 6% for 5-minutes or 3% for 20-minutes. Bleach-sedimentation significantly decreased the number of acid-fast bacilli visualised compared with conventional smears (geometric mean of acid-fast bacilli per 100 microscopy fields 166, 95%CI 68-406, versus 346, 95%CI 139-862, respectively; p = 0.02). Bleach-sedimentation diluted paucibacillary specimens less than specimens with higher concentrations of visible acid-fast bacilli (p = 0.02). Smears made from bleach-sedimented sputum were read more rapidly than conventional smears (9.6 versus 11.2 minutes, respectively, p = 0.03). Counting conventional acid-fast bacilli had high reliability (inter-observer agreement, r = 0.991) that was significantly reduced (p = 0.03) by bleach-sedimentation (to r = 0.707) because occasional strongly positive bleach-sedimented smears were misread as negative.

Conclusions

Gravity bleach-sedimentation improved laboratory safety by sterilising sputum but decreased the concentration of acid-fast bacilli visible on microscopy, especially for sputum specimens containing high concentrations of M. tuberculosis. Bleach-sedimentation allowed examination of more of each specimen in the time available but decreased the inter-observer reliability with which slides were read. Thus bleach-sedimentation effects vary depending upon specimen characteristics and whether microscopy was done for a specified time, or until a specified number of microscopy fields had been read. These findings provide an explanation for the contradictory results of previous studies.

Evaluating tuberculosis case detection via real-time monitoring of tuberculosis diagnostic services

RATIONALE

Tuberculosis case-detection rates are below internationally established targets in high-burden countries. Real-time monitoring and evaluation of adherence to widely endorsed standards of tuberculosis care might facilitate improved case finding.

OBJECTIVES

To monitor and evaluate the quality of tuberculosis case-detection and management services in a low-income country with a high incidence of tuberculosis.

METHODS

We prospectively evaluated tuberculosis diagnostic services at five primary health-care facilities in Uganda for 1 year, after introducing a real-time, electronic performance-monitoring system. We collected data on every clinical encounter, and measured quality using indicators derived from the International Standards of Tuberculosis Care.

MEASUREMENTS AND MAIN RESULTS

In 2009, there were 62,909 adult primary-care visits. During the first quarter of 2009, clinicians referred only 21% of patients with cough greater than or equal to 2 weeks for sputum smear microscopy and only 71% of patients with a positive sputum examination for tuberculosis treatment. These proportions increased to 53% and 84%, respectively, in the fourth quarter of 2009. The cumulative probability that a smear-positive patient with cough greater than or equal to 2 weeks would be appropriately evaluated and referred for treatment rose from 11% to 34% (P = 0.005). The quarterly number of tuberculosis cases identified and prescribed treatment also increased four-fold, from 5 to 21.

CONCLUSIONS

Poor adherence to internationally accepted standards of tuberculosis care improved after introduction of real-time performance monitoring and was associated with increased tuberculosis case detection. Real-time monitoring and evaluation can strengthen health systems in low-income countries and facilitate operational research on the effectiveness and sustainability of interventions to improve tuberculosis case detection.

Evaluation of combined LED-fluorescence microscopy and bleach sedimentation for diagnosis of tuberculosis at peripheral health service level

Background

Sputum microscopy is the only diagnostic for tuberculosis (TB) available at peripheral levels of health service in resource-poor countries. Its sensitivity is reduced in high HIV-prevalence settings. Sodium hypochlorite (NaOCl) specimen sedimentation prior microscopy and light-emitting diode (LED)-fluorescence microscopy (FM) can individually improve performance of microscopy. This study aimed to evaluate the performance of combined LED-FM and NaOCl sputum sedimentation for TB detection at peripheral level of health services.

Methods

A prospective study was conducted in an urban health clinic in Nairobi, Kenya. Three sputum specimens were collected over 2 days from consecutive TB suspects. Smears were prepared and stained with auramine O and Ziehl-Neelsen (ZN) methods. Bleach (3.5%) was added to the remaining specimen before overnight sedimentation at room temperature. Auramine O staining was performed on smears of sediment. A 4^th specimen was collected for TB culture. Auramine smears were read under the same microscope as used for ZN smears, but equipped with the LED FluoLED™ fluorescence illuminator.

Results

497 patients were included, and 1394 specimens collected. The yield of positive specimen was significantly increased after NaOCl sedimentation (24.9%) compared to direct LED-FM (20.6%) and direct ZN (20.3%). In detecting smear-positive patients, sensitivity was 78.5% for LED-FM after NaOCl sedimentation compared to 73.2% and 72.0% for direct LED-FM (P = 0.06) and direct ZN (P = 0.06), respectively. Specificity was 87.8% for LED-FM after NaOCl sedimentation compared to 96.7% and 95.9% for direct LED-FM (P<0.01) and direct ZN (P<0.01), respectively. Inter-reading agreement (kappa = 0.7) and technicians' acceptability were good.

Conclusion

NaOCl sedimentation did not improve the performance of LED-FM in the diagnosis of pulmonary TB at peripheral health service level.

Direct microscopy versus sputum cytology analysis and bleach sedimentation for diagnosis of tuberculosis: a prospective diagnostic study

Background

Diagnostic options for pulmonary tuberculosis in resource-poor settings are commonly limited to smear microscopy. We investigated whether bleach concentration by sedimentation and sputum cytology analysis (SCA) increased the positivity rate of smear microscopy for smear-positive tuberculosis.

Methods

We did a prospective diagnostic study in a Médecins Sans Frontières-supported hospital in Mindouli, Republic of Congo. Three sputum samples were obtained from 280 consecutive pulmonary tuberculosis suspects, and were processed according to WHO guidelines for direct smear microscopy. The remainder of each sputum sample was homogenised with 2.6% bleach, sedimented overnight, smeared, and examined blinded to the direct smear result for acid-fast bacilli (AFB). All direct smears were assessed for quality by SCA. If a patient produced fewer than three good-quality sputum samples, further samples were requested. Sediment smear examination was performed independently of SCA result on the corresponding direct smear. Positivity rates were compared using McNemar's test.

Results

Excluding SCA, 43.2% of all patients were diagnosed as positive on direct microscopy of up to three samples. 47.9% were diagnosed on sediment microscopy, with 48.2% being diagnosed on direct microscopy, sediment microscopy, or both. The positivity rate increased from 43.2% to 47.9% with a case definition of one positive smear (≥1 AFB/100 high power fields) of three, and from 42.1% to 43.9% with two positive smears. SCA resulted in 87.9% of patients producing at least two good-quality sputum samples, with 75.7% producing three or more. Using a case definition of one positive smear, the incremental yield of bleach sedimentation was 14/121, or 11.6% (95% CI 6.5-18.6, p = 0.001) and in combination with SCA was 15/121, or 12.4% (95% CI 7.1-19.6, p = 0.002). Incremental yields with two positive smears were 5/118, or 4.2% (95% CI 1.4-9.6, p = 0.062) and 7/118, or 5.9% (95% CI 2.4-11.8, p = 0.016), respectively.

Conclusions

The combination of bleach sedimentation and SCA resulted in significantly increased microscopy positivity rates with a case definition of either one or two positive smears. Implementation of bleach sedimentation led to a significant increase in the diagnosis of smear-positive patients. Implementation of SCA did not result in significantly increased diagnosis of tuberculosis, but did result in improved sample quality. Requesting extra sputum samples based on SCA results, combined with bleach sedimentation, could significantly increase the detection of smear-positive patients if routinely implemented in resource-limited settings where gold standard techniques are not available. We recommend that a pilot phase is undertaken before routine implementation to determine the impact in a particular context.

Integrated strategies to optimize sputum smear microscopy: a prospective observational study

RATIONALE

Smear-positive tuberculosis (TB) case detection rates are far below targets in most low-income countries. The standard approach to smear microscopy involves sputum collection over multiple days and examination of sputum smears by light microscopy (LM), an insensitive and time-consuming technique.

OBJECTIVE

To determine whether two alternative approaches can increase smear-positive case detection by increasing the efficiency (single-specimen microscopy) or sensitivity (light-emitting diode [LED] fluorescence microscopy [FM]) of TB suspect evaluation.

METHODS

We enrolled patients with cough of 2 weeks or more admitted to Mulago Hospital in Kampala, Uganda and collected spot and early morning sputum specimens. We compared the diagnostic accuracy of four prespecified strategies based on the number of sputum specimens collected (one specimen versus two specimens) and the type of microscopy (LM versus LED FM) using mycobacterial culture as a reference standard.

MEASUREMENTS AND MAIN RESULTS

Two hundred thirty-three of 464 (50%) patients had culture-positive TB. There was no difference in sensitivity between single-specimen and two-specimen strategies when smears were examined with LM (55 vs. 56%; difference, -1%; 95% confidence interval [CI], -5 to +2%) or LED FM (61 vs. 64%; difference, -3%; 95% CI, -7 to +1%). LED FM was more sensitive than LM with both the single-specimen (61 vs. 55%; difference, 6%; 95% CI, 2-10%) and two-specimen strategies (64 vs. 56%; difference, 8%; 95% CI, 3-12%). Findings were similar among the HIV-infected patient subset (n = 321 patients).

CONCLUSIONS

In low-income, high TB burden settings, single-specimen microscopy and LED FM, either alone or in combination, could considerably increase identification of smear-positive TB cases.