Assembly of viruslike particles by recombinant structural proteins of adeno-associated virus type 2 in insect cells

Production of VP3-only virus-like particles of Adeno-associated virus 2 in E. coli cells

Adeno-associated Virus (AAV) is a promising vector for gene therapy. However, few studies have focused on producing virus-like particles (VLPs) of AAV in cells, especially in E. coli. In this study, we describe a method to produce empty VP3-only VLPs of AAV2 in E. coli by co-expressing VP3 and assembly-activating protein (AAP) of AAV2. Although the yields of VLPs produced with our method were low, the VLPs were able to self-assemble in E. coli without the need of in vitro capsid assembly. The produced VLPs were characterized by immunological detection and transmission electron microscopy (TEM). In conclusion, this study demonstrated that capsid assembly of AAV2 is possible in E. coli, and E. coli may be a candidate system for production of VLPs of AAV.

Structural Characterization of Porcine Adeno-Associated Virus Capsid Protein with Nuclear Trafficking Protein Importin Alpha Reveals a Bipartite Nuclear Localization Signal

Adeno-associated viruses (AAV) are important vectors for gene therapy, and accordingly, many aspects of their cell transduction pathway have been well characterized. However, the specific mechanisms that AAV virions use to enter the host nucleus remain largely unresolved. We therefore aimed to reveal the interactions between the AAV Cap protein and the nuclear transport protein importin alpha (IMPα) at an atomic resolution. Herein we expanded upon our earlier research into the Cap nuclear localization signal (NLS) of a porcine AAV isolate, by examining the influence of upstream basic regions (BRs) towards IMPα binding. Using a high-resolution crystal structure, we identified that the IMPα binding determinants of the porcine AAV Cap comprise a bipartite NLS with an N-terminal BR binding at the minor site of IMPα, and the previously identified NLS motif binding at the major site. Quantitative assays showed a vast difference in binding affinity between the previously determined monopartite NLS, and bipartite NLS described in this study. Our results provide a detailed molecular view of the interaction between AAV capsids and the nuclear import receptor, and support the findings that AAV capsids enter the nucleus by binding the nuclear import adapter IMPα using the classical nuclear localization pathway.

Structural characterization of the porcine adeno-associated virus Po1 capsid protein binding to the nuclear trafficking protein importin alpha

Adeno-associated viruses (AAVs) are key vectors for gene therapy; thus, many aspects of their cell transduction pathway have been revealed in detail. However, the specific mechanisms AAV virions use to enter the host nucleus remain largely unresolved. We therefore aimed to reveal the structural interactions between the AAV capsid (Cap) protein and the nuclear transport protein importin alpha (IMPα). A putative nuclear localization sequence (NLS) in the virion protein 1 capsid protein of the porcine AAV Po1 was identified. This region was complexed with IMPα and a structure solved at 2.26 Å. This is the first time that an NLS of AAV Cap complexed with IMPα has been determined structurally. Our results support the findings that AAV capsids enter the nucleus through binding the nuclear import adapter IMPα.

Bombyx mori Pupae Efficiently Produce Recombinant AAV2/HBoV1 Vectors with a Bombyx mori Nuclear Polyhedrosis Virus Expression System

Recombinant adeno-associated virus (AAV) vectors have broad application prospects in the field of gene therapy. The establishment of low-cost and large-scale manufacturing is now the general agenda for industry. The baculovirus-insect cell/larva expression system has great potential for these applications due to its scalability and predictable biosafety. To establish a more efficient production system, Bombyx mori pupae were used as a new platform and infected with recombinant Bombyx mori nuclear polyhedrosis virus (BmNPV). The production of a chimeric recombinant adeno-associated virus (rAAV) serotype 2/human bocavirus type-1 (HBoV1) vector was used to evaluate the efficiency of this new baculovirus expression vector (BEV)–insect expression system. For this purpose, we constructed two recombinant BmNPVs, which were named rBmNPV/AAV2Rep-HBoV1Cap and rBmNPV/AAV2ITR-eGFP. The yields of rAAV2/HBoV1 derived from the rBmNPV/AAV2Rep-HBoV1Cap and rBmNPV/AAV2ITR-eGFP co-infected BmN cells exceeded 2 × 10⁴ vector genomes (VG) per cell. The rBmNPV/AAV2Rep-HBoV1Cap and rBmNPV/AAV2ITR-eGFP can express stably for at least five passages. Significantly, rAAV2/HBoV1 could be efficiently generated from BmNPV-infected silkworm larvae and pupae at average yields of 2.52 × 10¹² VG/larva and 4.6 × 10¹² VG/pupa, respectively. However, the vectors produced from the larvae and pupae had a high percentage of empty particles, which suggests that further optimization is required for this platform in the future. Our work shows that silkworm pupae, as an efficient bioreactor, have great potential for application in the production of gene therapy vectors.

Virus-Like Particle: Evolving Meanings in Different Disciplines

Virus-like particle (VLP) is a term that has been in use for about 80 years. Usually, VLP has meant a particle that is like a virus, generally by appearance, but without either proven or actual virus functionality. Initially VLP referred to particles seen in electron microscope images of tissues. More recently, VLP has come to mean other things to other researchers. A key divergence has been use of VLP in association with vaccine and biotechnology applications versus use of VLP in enumeration of viruses in environmental samples. To these viral ecologists, a VLP is a particle that is virus sized, has nucleic acid, and could be a functional virus. But to vaccine developers and biotechnology researchers a VLP instead is a viral structure that intentionally lacks a viral genome. In this study, we look at the history of use of VLP, following changes in meaning as the technology to study VLPs changed.

Advancements in molecular design and bioprocessing of recombinant adeno-associated virus gene delivery vectors using the insect-cell baculovirus expression platform

Despite rapid progress in the field, scalable high-yield production of adeno-associated virus (AAV) is still one of the critical bottlenecks the manufacturing sector is facing. The insect cell-baculovirus expression vector system (IC-BEVS) has emerged as a mainstream platform for the scalable production of recombinant proteins with clinically approved products for human use. In this review, we provide a detailed overview of the advancements in IC-BEVS for rAAV production. Since the first report of baculovirus-induced production of rAAV vector in insect cells in 2002, this platform has undergone significant improvements, including enhanced stability of Bac-vector expression and a reduced number of baculovirus-coinfections. The latter streamlining strategy led to the eventual development of the Two-Bac, One-Bac, and Mono-Bac systems. The one baculovirus system consisting of an inducible packaging insect cell line was further improved to enhance the AAV vector quality and potency. In parallel, the implementation of advanced manufacturing approaches and control of critical processing parameters have demonstrated promising results with process validation in large-scale bioreactor runs. Moreover, optimization of the molecular design of vectors to enable higher cell-specific yields of functional AAV particles combined with bioprocess intensification strategies may also contribute to addressing current and future manufacturing challenges.

Chimeric Capsid Proteins Impact Transduction Efficiency of Haploid Adeno-Associated Virus Vectors

Our previous studies have demonstrated that haploid AAV vectors made from capsids of two different serotypes induced high transduction and prevented serotype-specific antibody binding. In this study, we explored the transduction efficiency of several haploid viruses, which were made from the VP1/VP2 of one serotype and VP3 of another compatible serotype. After systemic injection of 2 × 10¹⁰ vg of AAV vectors into mice, the haploid AAV vectors, composed of VP1/VP2 from serotypes 8 or 9, and VP3 from AAV2, displayed a two to seven-fold increase in liver transduction compared with those of parental AAV2 vectors. Furthermore, a chimeric AAV2/8 VP1/VP2 with N-terminus of VP1/VP2 from AAV2 and C-terminus (VP3 domain) from AAV8 was constructed, and produced the haploid vector 28m-2VP3 with AAV2 VP3. The haploid 28m-2VP3 vector showed a five-fold higher transduction than that of the vectors composed solely of AAV2 VPs. Remarkably, the 28m-2VP3 vectors also induced a significant increase in transgene expression compared to the vectors composed of AAV8 VP1/VP2 with AAV2 VP3. The results suggest that the difference in the VP1/VP2 N-terminal region between AAV2 and AAV8 may allow better "communication" between the VP1/VP2 N-terminus of AAV2 with its cognate VP3. Similarly, the haploid vectors, VP1/VP2 from serotypes 8 or 9 and VP3 from AAV3, achieved higher transductions in multiple tissue types beyond typical tropism compared with those of AAV3 vectors. Consistently, higher vector genome copy numbers were detected in these tissues, indicating that an incorporation of non-cognate VP1/VP2 might influence the cellular tropism of the haploid vectors. However, there was no significant difference or even decreased transductions when compared with those of parental AAV8 or AAV9 vectors. In summary, these studies provide insight into current development strategies of AAV vectors that can increase AAV transduction across multiple tissues.

Examination and Reconstruction of Three Ancient Endogenous Parvovirus Capsid Protein Gene Remnants Found in Rodent Genomes

Parvovirus-derived endogenous viral elements (EVEs) have been found in the genomes of many different animal species, resulting from integration events that may have occurred from more than 50 million years ago to much more recently. Here, we further investigate the properties of autonomous parvovirus EVEs and describe their relationships to contemporary viruses. While we did not find any intact capsid protein open reading frames in the integrated viral sequences, we examined three EVEs that were repaired to form full-length sequences with relatively few changes. These sequences were found in the genomes of Rattus norvegicus (brown rat), Mus spretus (Algerian mouse), and Apodemus sylvaticus (wood mouse). The R. norvegicus sequence was not present in the genomes of the closely related species R. rattus, R. tanezumi, R. exulans, and R. everetti, indicating that it was less than 2 million years old, and the M. spretus and A. sylvaticus sequences were not found in the published genomes of other mouse species, also indicating relatively recent insertions. The M. spretus VP2 sequence assembled into capsids, which had high thermal stability, bound the sialic acid N-acetylneuraminic acid, and entered murine L cells. The 3.89-Å structure of the M. spretus virus-like particles (VLPs), determined using cryo-electron microscopy, showed similarities to rodent and porcine parvovirus capsids. The repaired VP2 sequences from R. norvegicus and A. sylvaticus did not assemble as first prepared, but chimeras combining capsid surface loops from R. norvegicus with canine parvovirus assembled, allowing some of that capsid's structures and functions to be examined.IMPORTANCE Parvovirus endogenous viral elements (EVEs) that have been incorporated into the genomes of different animals represent remnants of the DNA sequences of ancient viruses that infected the ancestors of those animals millions of years ago, but we know little about their properties or how they differ from currently circulating parvoviruses. By expressing the capsid proteins of different parvovirus EVEs that were found integrated into the genomes of three different rodents, we can examine their structures and functions. A VP2 (major capsid protein) EVE sequence from a mouse genome assembled into capsids that had a similar structure and biophysical properties to extant parvoviruses and also bound sialic acids and entered rodent cells. Chimeras formed from combinations of canine parvovirus and portions of the parvovirus sequences from the brown rat genome allowed us to examine the structures and functions of the surface loops of that EVE capsid.

Understanding capsid assembly and genome packaging for adeno-associated viruses

Adeno-associated viruses (AAVs) are promising therapeutic viral vectors. Their capsid is assembled from viral proteins VP1, VP2 and VP3, aided by an assembly-activating protein, followed by replication protein mediated packaging of their 4.7-kb genome with inverted terminal repeats as packaging signals. To aid improvement of AAV vectors, knowledge of viral determinants of successful capsid assembly and genome packaging is important. We review the current knowledge of these two processes and efforts to overcome limited DNA packaging capacity and limit the packaging of unwanted foreign DNA in vector development. Residues involved in essential capsid assembly and genome packaging interactions cannot be manipulated in vector engineering. This information thus aids strategies to improve vector production and to increase AAV packaging capacity toward improved efficacy of this vector system.

The role of nuclear localization signal in parvovirus life cycle

Parvoviruses are small, non-enveloped viruses with an approximately 5.0 kb, single-stranded DNA genome. Usually, the parvovirus capsid gene contains one or more nuclear localization signals (NLSs), which are required for guiding the virus particle into the nucleus through the nuclear pore. However, several classical NLSs (cNLSs) and non-classical NLSs (ncNLSs) have been identified in non-structural genes, and the ncNLSs can also target non-structural proteins into the nucleus. In this review, we have summarized recent research findings on parvovirus NLSs. The capsid protein of the adeno-associated virus has four potential nuclear localization sequences, named basic region 1 (BR), BR2, BR3 and BR4. BR3 was identified as an NLS by fusing it with green fluorescent protein. Moreover, BR3 and BR4 are required for infectivity and virion assembly. In Protoparvovirus, the canine parvovirus has a common cNLS located in the VP1 unique region, similar to parvovirus minute virus of mice (MVM) and porcine parvovirus. Moreover, an ncNLS is found in the C-terminal region of MVM VP1/2. Parvovirus B19 also contains an ncNLS in the C-terminal region of VP1/2, which is essential for the nuclear transport of VP1/VP2. Approximately 1 or 2 cNLSs and 1 ncNLS have been reported in the non-structural protein of bocaviruses. Understanding the role of the NLS in the process of parvovirus infection and its mechanism of nuclear transport will contribute to the development of therapeutic vaccines and novel antiviral medicines.

Viruses and Virus-Like Particles in Biotechnology: Fundamentals and Applications

Although viruses are simple biological systems, they are capable of evolving highly efficient techniques for infecting cells, expressing their genomes, and generating new copies of themselves. It is possible to genetically manipulate most of the different classes of known viruses in order to produce recombinant viruses that express foreign proteins. Recombinant viruses have been used in gene therapy to deliver selected genes into higher organisms, in vaccinology and immunotherapy, and as important research tools to study the structure and function of these proteins.

Virus-like particles (VLPs) are multiprotein structures that mimic the organization and conformation of authentic native viruses but lack the viral genome. They have been applied not only as prophylactic and therapeutic vaccines but also as vehicles in drug and gene delivery and, more recently, as tools in nanobiotechnology.

In this chapter, basic and advanced features of viruses and VLPs are presented and their major applications are discussed. The different production platforms based on animal cell technology are explained, and their main challenges and future perspectives are explored. The implications of large-scale production of viruses and VLPs are discussed in the context of process control, monitoring, and optimization. The main upstream and downstream technical challenges are identified and discussed accordingly.

Manufacturing of recombinant adeno-associated viral vectors for clinical trials

The ability to elicit robust and long-term transgene expression in vivo together with minimal immunogenicity and little to no toxicity are only a few features that make recombinant adeno-associated virus (rAAV) vectors ideally suited for many gene therapy applications. Successful preclinical studies have encouraged the use of rAAV for therapeutic gene transfer to patients in the clinical setting. Nevertheless, the use of rAAV in clinical trials has underscored the need for production and purification systems capable of generating large amounts of highly pure rAAV particles. To date, generating vector quantities sufficient to meet the expanding clinical demand is still a hurdle when using current production systems. In this chapter, we will provide a description of the current methods to produce clinical grade of rAAV under current good manufacturing practice (cGMP) settings.

OneBac 2.0: Sf9 Cell Lines for Production of AAV5 Vectors with Enhanced Infectivity and Minimal Encapsidation of Foreign DNA

Scalable production of recombinant adeno-associated virus vectors (rAAV) in baculovirus-infected Sf9 cells yields high burst sizes but variable infectivity rates per packaged AAV vector genome depending on the chosen serotype. Infectivity rates are particularly low for rAAV5 vectors, based on the genetically most divergent AAV serotype. In this study we describe key improvements of the OneBac system for the generation of rAAV5 vectors, whose manufacturing has been unsatisfactory in all current insect cell-based production systems. The Sf9 cell-based expression strategy for AAV5 capsid proteins was modified to enhance relative AAV5 VP1 levels. This resulted in a 100-fold boost of infectivity per genomic AAV5 particle with undiminished burst sizes per producer cell. Furthermore, the issue of collateral packaging of helper DNA into AAV capsids was approached. By modifications of the AAV rep and cap expression constructs used for the generation of stable Sf9 cell lines, collateral packaging of helper DNA sequences during rAAV vector production was dramatically reduced down to 0.001% of packaged rAAV genomes, while AAV5 burst sizes and infectivity rates were maintained. OneBac 2.0 represents the first insect cell-based scalable production system for high per-particle AAV5 infectivity rates combined with minimal collateral packaging of helper DNA, allowing the manufacturing of safe AAV5-based gene therapies for clinical application.

Capsid protein expression and adeno-associated virus like particles assembly in Saccharomyces cerevisiae

Background

The budding yeast Saccharomyces cerevisiae supports replication of many different RNA or DNA viruses (e.g. Tombusviruses or Papillomaviruses) and has provided means for up-scalable, cost- and time-effective production of various virus-like particles (e.g. Human Parvovirus B19 or Rotavirus). We have recently demonstrated that S. cerevisiae can form single stranded DNA AAV2 genomes starting from a circular plasmid. In this work, we have investigated the possibility to assemble AAV capsids in yeast.

Results

To do this, at least two out of three AAV structural proteins, VP1 and VP3, have to be simultaneously expressed in yeast cells and their intracellular stoichiometry has to resemble the one found in the particles derived from mammalian or insect cells. This was achieved by stable co-transformation of yeast cells with two plasmids, one expressing VP3 from its natural p40 promoter and the other one primarily expressing VP1 from a modified AAV2 Cap gene under the control of the inducible yeast promoter Gal1. Among various induction strategies we tested, the best one to yield the appropriate VP1:VP3 ratio was 4.5 hour induction in the medium containing 0.5% glucose and 5% galactose. Following such induction, AAV virus like particles (VLPs) were isolated from yeast by two step ultracentrifugation procedure. The transmission electron microscopy analysis revealed that their morphology is similar to the empty capsids produced in human cells.

Conclusions

Taken together, the results show for the first time that yeast can be used to assemble AAV capsid and, therefore, as a genetic system to identify novel cellular factors involved in AAV biology.

Nuclear translocation of adeno-associated virus type 2 capsid proteins for virion assembly

Adeno-associated virus (AAV) capsid assembly occurs in the nucleus. Newly synthesized capsid proteins VP1, VP2 and VP3 contain several basic regions (BRs), which may act as nuclear localization signals (NLSs). Mutation of BR2 and BR3, located at the VP1 and VP2 N termini, marginally reduced nuclear uptake of VP1 or VP2, but not of VP3, when expressed in the context of the whole AAV type 2 (AAV2) genome. Combined mutation of BR1, BR2 and BR3 resulted in capsids with slightly reduced amounts of VP1. Expression of isolated VP1/2 N termini revealed an influence of BR3 on nuclear transport, whilst BR1 or BR2 had no effect. However, deletion of an N-terminal fragment in front of the BR elements strongly reduced nuclear uptake of VP1/2 N termini. Mutation of BR4, present in all three capsid proteins, led to their retention in the cytoplasm and to the formation of speckles, resulting in a lack of capsid formation and a significant reduction in VP levels. In a VP fragment comprising BR2, BR3 and BR4, the BR4 element was not necessary for nuclear localization. Mutation of BR5 in the C-terminal part of the VPs resulted in a speckled protein distribution in the nucleus, strongly reduced capsid assembly, and low VP1 and VP2 levels. Taken together, these results showed that BR2 and BR3 have a weak influence on nuclear transport of VP1 and VP2, whilst combined mutation of BR1, BR2 and BR3 influences the stoichiometry of VPs in assembled capsids. BR4 and BR5 play a crucial role in capsid assembly but have no NLS activity.

AAV capsid structure and cell interactions

The Adeno-associated viruses (AAVs) are not associated with any diseases, and their ability to package non-genomic DNA and to transduce different cell/tissue populations has generated significant interest in understanding their basic biology in efforts to improve their utilization for corrective gene delivery. This includes their capsid structure, cellular tropism and interactions for entry, uncoating, replication, DNA packaging, capsid assembly, and antibody neutralization. The human and nonhuman primate AAVs are clustered into serologically distinct genetic clade and serotype groups, which have distinct cellular/tissue tropisms and transduction efficiencies. These properties are highly dependent upon the AAV capsid amino acid sequence, their capsid structure, and their interactions with host cell factors, including cell surface receptors, co-receptors, signaling molecules, proteins involved in host DNA replication, and host-derived antibodies. This chapter reviews the current structural information on AAV capsids and the capsid viral protein regions playing a role in the cellular interactions conferring an infective phenotype, which are then used to annotate the functional regions of the capsid. Based on the current data, the indication is that the AAVs, like other members of the Parvoviridae and other ssDNA viruses that form a T = 1 capsid, have evolved a multifunctional capsid with conserved core regions as is required for efficient capsid trafficking, capsid assembly, and genome packaging. Disparate surface loop structures confer differential receptor recognition and are involved in antibody recognition. The role of structural regions in capsid uncoating remains to be elucidated.

Latest developments in the large-scale production of adeno-associated virus vectors in insect cells toward the treatment of neuromuscular diseases

Adeno-associated viral (AAV) vectors are gene vectors of choice for the development of gene therapy treatments for many rare diseases affecting various tissues including retina, central nervous system, liver, and muscle. The AAV based gene therapy approach became conceivable only after the development of easily scalable production systems including the Sf9 cell/baculovirus expression system. Since the establishment of the production of AAV in the Sf9/baculovirus system by the group of Rob Kotin, this new production system has largely been developed for optimizing the large scale production of different serotypes of AAV for preclinical and clinical purposes. Today this manufacturing system allows for the production of purified vector genome (vg) quantities of up to 2 × 10(15) for AAV1 using a 50L reactor and the scale up to larger reactor volumes is paralleled by a corresponding increase in the vector yield. This review presents the principles and achievements of the Sf9/baculovirus system for the production of AAV in comparison to other expression systems based on mammalian cells. In addition, new developments and improvements, which have not yet been implemented at a large scale, and perspectives for further optimization of this production system will be discussed. All of these achievements as well as further process intensifications are urgently needed for the production of clinical doses for the treatment of neuromuscular diseases for which estimated doses of up to 10(14)vg/kg body mass are required.

Goose parvovirus structural proteins expressed by recombinant baculoviruses self-assemble into virus-like particles with strong immunogenicity in goose

Goose parvovirus (GPV), a small non-enveloped ssDNA virus, can cause Derzsy's disease, and three capsid proteins of VP1, VP2, and VP3 are encoded by an overlapping nucleotide sequence. However, little is known on whether recombinant viral proteins (VPs) could spontaneously assemble into virus-like particles (VLPs) in insect cells and whether these VLPs could retain their immunoreactivity and immunogenicity in susceptible geese. To address these issues, genes for these GPV VPs were amplified by PCR, and the recombinant VPs proteins were expressed in insect cells using a baculovirus expression system for the characterization of their structures, immunoreactivity, and immunogenicity. The rVP1, rVP2, and rVP3 expressed in Sf9 cells were detected by anti-GPV sera, anti-VP3 sera, and anti-His antibodies, respectively. Electron microscopy revealed that these rVPs spontaneously assembled into VLPs in insect cells, similar to that of the purified wild-type GPV virions. In addition, vaccination with individual types of VLPs, particularly with the rVP2-VLPs, induced higher titers of antibodies and neutralized different strains of GPVs in primary goose and duck embryo fibroblast cells in vitro. These data indicated that these VLPs retained immunoreactivity and had strong immunogenicity in susceptible geese. Therefore, our findings may provide a framework for development of new vaccines for the prevention of Derzsy's disease and vehicles for the delivery of drugs.

Conformational changes in adeno-associated virus type 1 induced by genome packaging

Adeno-associated virus (AAV) is frequently used as a vector for gene therapy. The viral capsid consists of three structural proteins (VP1, VP2, and VP3) that have a common C-terminal core (VP3), with N-terminal extensions of increasing length in VP2 and VP1. The capsid encloses a single-stranded genome of up to 4.7 kb, which is packaged into empty capsids. The N-terminal extension of VP1 carries a phospholipase domain that becomes accessible during infection in the endosomal pathway. We have used cryo-electron microscopy and image reconstruction to determine subnanometer-resolution structures of recombinant AAV1 that has packaged different amounts of a 3.6-kb recombinant genome. The maps show that the AAV1 capsid undergoes continuous conformational changes upon packaging of the genome. The rearrangements occur at the inner capsid surface and lead to constrictions of the pores at the 5-fold symmetry axes and to subtle movements of the β-sheet regions of the capsid proteins. In fully packaged particles, the genome forms stem-like features that contact the inner capsid surface at the 3-fold symmetry axes. We think that the reorganization of the inner surface has an impact on the viral life cycle during infection, preparing the externalization of phospholipase domains through the pores at the 5-fold symmetry axes and possibly genome release.

Viruses and Virus-Like Particles in Biotechnology

Although viruses are simple biological systems, they are capable of evolving highly efficient techniques for infecting cells, expressing their genomes, and generating new copies of themselves. It is possible to genetically manipulate most of the different classes of known viruses in order to produce recombinant viruses that express foreign proteins. Recombinant viruses have been used in gene therapy to deliver selected genes into higher organisms, in vaccinology and immunotherapy, and as important research tools to study the structure and function of these proteins.

Virus-like particles (VLPs) are multiprotein structures that mimic the organization and conformation of authentic native viruses but lack the viral genome. They have been applied not only as prophylactic and therapeutic vaccines but also as vehicles in drug and gene delivery and, more recently, as tools in nanobiotechnology.

In this article, basic and advanced features of viruses and VLPs are presented and their major applications are discussed. The different production platforms based on animal cell technology are explained, and their main challenges and future perspectives are explored. The implications of large-scale production of viruses and VLPs are discussed in the context of process control, monitorization, and optimization. The main upstream and downstream technical challenges are identified and discussed accordingly.

A viral assembly factor promotes AAV2 capsid formation in the nucleolus

The volume available in icosahedral virus capsids limits the size of viral genomes. To overcome this limitation, viruses have evolved strategies to increase their coding capacity by using more than one ORF while keeping the genome length constant. The assembly of virus capsids requires the coordinated interaction of a large number of subunits to generate a highly ordered structure in which the viral genome can be enclosed. To understand this process, it is essential to know which viral and nonviral components are involved in the assembly reaction. Here, we show that the adeno-associated virus (AAV) encodes a protein required for capsid formation by means of a nested, alternative ORF of the cap gene. Translation is initiated at a nonconventional translation start site, resulting in the expression of a protein with a calculated molecular weight of 23 kDa. This protein, designated assembly-activating protein (AAP), is localized in the host cell nucleolus, where AAV capsid morphogenesis occurs. AAP targets newly synthesized capsid proteins to this organelle and in addition fulfils a function in the assembly reaction itself. Sequence analysis suggests that also all other species of the genus Dependovirus encode a homologous protein in their cap gene. The arrangement of different ORFs that encode capsid proteins and an assembly factor within the same mRNA facilitates a timely coordinated expression of the components involved in the assembly process.

Evidence of prior exposure to human bocavirus as determined by a retrospective serological study of 404 serum samples from adults in the United States

Recently, molecular screening for pathogenic agents has identified a partial genome of a novel parvovirus, called human bocavirus (HBoV). The presence of this newly described parvovirus correlated with upper and lower respiratory tract infections in children. Lower respiratory tract infections are a leading cause of hospital admission in children, and the etiological agent has not been identified in up to 39% of these cases. Using baculovirus expression vectors (BEVs) and an insect cell system, we produced virus-like particles (VLPs) of HBoV. The engineered BEVs express the HBoV capsid proteins stoichiometrically from a single open reading frame. Three capsid proteins assemble into the VLP rather than two proteins predicted from the HBoV genome sequence. The denatured capsid proteins VP1, VP2, and VP3 resolve on silver-stained sodium dodecyl sulfate-polyacrylamide gels as three bands with apparent molecular masses of 72 kDa, 68 kDa, and 62 kDa, respectively. VP2 apparently initiates at a GCT codon (alanine) 273 nucleotides downstream from the VP1 start site and 114 nucleotides upstream from the VP3 initiation site. We characterized the stable capsids using physical, biochemical, and serological techniques. We found that the density of the VLP is 1.32 g/cm(3) and is consistent with an icosahedral symmetry with approximately a 25-nm diameter. Rabbit antiserum against the capsid of HBoV, which did not cross-react with adeno-associated virus type 2, was used to develop enzyme-linked immunosorbent assays (ELISAs) for anti-HBoV antibodies in human serum. Using ELISA, we tested 404 human serum samples and established a range of antibody titers in a large U.S. adult population sample.

The role of the adeno-associated virus capsid in gene transfer

Adeno-associated virus (AAV) is one of the most promising viral gene transfer vectors that has been shown to effect long-term gene expression and disease correction with low toxicity in animal models, and is well tolerated in human clinical trials. The surface of the AAV capsid is an essential component that is involved in cell binding, internalization, and trafficking within the targeted cell. Prior to developing a gene therapy strategy that utilizes AAV, the serotype should be carefully considered since each capsid exhibits a unique tissue tropism and transduction efficiency. Several approaches have been undertaken in an effort to target AAV vectors to specific cell types, including utilizing natural serotypes that target a desired cellular receptor, producing pseudotyped vectors, and engineering chimeric and mosaic AAV capsids. These capsid modifications are being incorporated into vector production and purification methods that provide for the ability to scale-up the manufacturing process to support human clinical trials. Protocols for small-scale and large-scale production of AAV, as well as assays to characterize the final vector product, are presented here. The structures of AAV2, AAV4, and AAV5 have been solved by X-ray crystallography or cryo-electron microscopy (cryo-EM), and provide a basis for rational vector design in developing customized capsids for specific targeting of AAV vectors. The capsid of AAV has been shown to be remarkably stable, which is a desirable characteristic for a gene therapy vector; however, recently it has been shown that the AAV serotypes exhibit differential susceptibility to proteases. The capsid fragmentation pattern when exposed to various proteases, as well as the susceptibility of the serotypes to a series of proteases, provides a unique fingerprint for each serotype that can be used for capsid identity validation. In addition to serotype identification, protease susceptibility can also be utilized to study dynamic structural changes that must occur for the AAV capsid to perform its various functions during the virus life cycle. The use of proteases for structural studies in solution complements the crystal structural studies of the virus. A generic protocol based on proteolysis for AAV serotype identification is provided here.

Production and characterization of adeno-associated viral vectors

The adeno-associated virus (AAV) is one of the most promising viral vectors for human gene therapy. As with any potential therapeutic system, a thorough understanding of it at the in vitro and in vivo levels is required. Over the years, numerous methods have been developed to better characterize AAV vectors. These methods have paved the way to a better understanding of the vector and, ultimately, its use in clinical applications. This review provides an up-to-date, detailed description of essential methods such as production, purification and titering and their application to characterize current AAV vectors for preclinical and clinical use.

Development of AAV serotype-specific ELISAs using novel monoclonal antibodies

Adeno-associated viruses (AAV) have been developed and evaluated as recombinant vectors for gene therapy. More recently, due to the advantages they offer for gene transfer, several AAV serotypes have gained increasing interest. However, monoclonal antibodies for the characterization and quantitation of vectors derived from different serotypes are at present not available. Serotype-specific monoclonal antibodies (mAbs) against the capsids of the serotypes 1/6, 4 and 5 are described. These antibodies, designated as ADK1a and b, ADK4 or ADK5a and b, reacted specifically with the indicated serotype capsids in cell lysates. ADK 1a and b cross-reacted with its highly related AAV6 serotype, but not with the other serotypes tested. The new antibodies recognized exclusively assembled capsids and neither free nor denatured capsid proteins as shown by fractionation experiments. In immunofluorescence experiments, the mAbs stained only distinct intranuclear foci in cells expressing the capsid protein. The development of capture ELISAs for quantitation of AAV1 and 6, AAV4 or AAV5 capsids illustrates that these novel monoclonal antibodies provide valuable tools for characterization of vector stocks.

Virus-like particle and viral vector production using the baculovirus expression vector system/insect cell system: adeno-associated virus-based products

The ability to make a large variety of virus-like particles (VLPs) has been successfully achieved in the baculovirus expression vector system (BEVS)/insect cell system. The production and scale-up of these particles, which are mostly sought as candidate vaccines, are currently being addressed. Furthermore, these VLPs are being investigated as delivery agents for use as therapeutics. Recently, adeno-associated viral (AAV) vectors, which can be potentially used for human gene therapy, have been produced in insect cells using three baculovirus vectors to supply the required genes. The use of host insect cells allows mass production of VLPs in a proven scaleable system. This chapter focuses on the methodology, based on the work done in our lab, for the production of AAV-like particles and vectors in a BEVS/insect cell system.

Proteolytic mapping of the adeno-associated virus capsid

The three-dimensional structures of the viral capsid of three AAV serotypes have previously been determined by X-ray crystallography or cryoelectron microscopy. These studies of AAV and similar studies of autonomous parvoviruses have yielded important structural information about the virions in a low-energy conformation. However, there is little information on the structural properties of AAV virions in solution under physiological conditions. We demonstrate that proteolytic digestion of AAV2 virions with trypsin results in cleavage at a specific site on the capsid surface while the capsid remains intact. The products of digestion were mapped using unique antibodies, protein sequencing, mass spectroscopy, and 3D structure modeling to a region on a surface loop that is common to all three AAV2 structural proteins. Empty AAV2 capsids could be distinguished from full (DNA-containing) capsids, having an increased susceptibility of VP2 to trypsin and being digested more rapidly by chymotrypsin. Proteolytic analysis utilizing trypsin or chymotrypsin was also capable of distinguishing AAV2 from AAV1 and AAV5, as seen by differential susceptibility and unique fragment patterns. These data demonstrate a novel approach for studying the structure of AAV capsids in solution and should be valuable in the testing and engineering of AAV vectors for gene transfer.

Adeno-associated virus as a gene therapy vector: vector development, production and clinical applications

Adeno-associated virus (AAV) has emerged as an attractive vector for gene therapy. AAV vectors have successfully been utilized to promote sustained gene expression in a variety of tissues such as muscle, eye, brain, liver, and lung. As the significance of AAV as a gene therapy vector has been realized over the past years, recent developments in recombinant AAV (rAAV) production and purification have revolutionized the AAV field. It is now possible to produce high yields of vector (10(12)-10(13) genome-containing particles per mL) that are free of contaminating cellular and helper virus proteins. Such vectors have been successfully used in preclinical applications in animal models such as those of hemophilia, lysosomal storage diseases and vision deficiency, all of which have shown therapeutic benefits from rAAV treatment. Clinical trials using rAAV2 for the treatment of hemophilia B, cystic fibrosis, alpha-1-antitrypsin deficiency, and Canavan disease have begun, and reports from these phase I trials support the safety seen in preclinical trials. Eventually, tissue-specific vectors that can potentially evade the immune system will be required to optimize success in gene therapy. In recent years, this has led to the development of retargeted rAAV2 vectors and the identification and characterization of new serotypes from human and nonhuman primates that could potentially achieve these goals. AAV virologists and gene therapists alike have just begun to scratch the surface in terms of the utility of this small virus in a clinical setting. In this chapter, we will provide a comprehensive overview of the recent advances in rAAV vector production and purification, vector development, and clinical applications.

Nuclear Transport of Trimeric Assembly Intermediates Exerts a Morphogenetic Control on the Icosahedral Parvovirus Capsid

The connection between nuclear transport and morphogenesis of a large macromolecular entity has been investigated using the karyophylic capsid of the parvovirus minute virus of mice (MVM) as a model. The VP1 (82 kDa) and VP2 (63 kDa) proteins forming the T = 1 icosahedral MVM capsid at the respective 1:5 molar ratio of synthesis, could be covalently cross-linked with dimethyl suberimidate into two types of oligomeric assemblies, which were present at stoichiometric amounts in infected cell extracts and purified viral particles. The larger species contained VP1 and corresponded in size (200 kDa) to a heterotrimer of one VP1 and two VP2 subunits. The smaller species contained VP2 only and corresponded in size (180 kDa) to a homotrimer. The introduction of bulky residues or the truncation of side-chains involved in multiple interactions at the interfaces between trimers of VPs in the MVM capsid, produced the accumulation of trimeric intermediates that were competent in nuclear translocation but not in capsid assembly. These results indicate that MVM maturation proceeds by cytoplasmic oligomerization of the capsid subunits into two types of trimers, which are the assembly intermediates competent to translocate across the nuclear membrane. Consistent with this conclusion, mutations at basic residues that inactivate a previously identified beta-stranded nuclear localization motif, which notably are not involved in inter or intra-subunit contacts, led to cytoplasmic retention of the two types of trimers, with no evidence for other assembly intermediates. Although a fraction of the VP1-containing trimers were translocated into the nucleus driven by the conventional nuclear transport signal of VP1 N terminus, their further assembly in the absence of the VP2-only trimers yielded large molecular mass amorphous aggregates. Therefore, the nuclear transport stoichiometry of assembly intermediates may exert a morphogenetic quality control on macromolecular complexes like the MVM capsid.

Current issues in adeno-associated viral vector production

Adeno-associated virus (AAV) is currently one of the most promising systems for human gene therapy. Numerous preclinical studies have documented the excellent safety profile of these vectors along with their impressive performances in their favored target, consisting of highly differentiated postmitotic tissues such as muscle, central nervous system and liver. Clinical trials have been conducted confirming these data, but also emphasizing the requirement of further high-tech developments of the production and purification procedures that would allow both scaling-up and improvement of vector batch quality, necessary to human application. The scope of this review will be the state of the art in the various production methods of recombinant AAV (rAAV), delimiting their respective perimeter of application and also their main advantages and drawbacks, and thereby shedding light on the main challenges to take in the near future to bring AAV vectors more widely into the clinics.

Production of recombinant adeno-associated viral vectors using a baculovirus/insect cell suspension culture system: from shake flasks to a 20-L bioreactor

Production of recombinant adeno-associated viral vectors using a baculovirus/insect cell system at various scales is presented. Shake flask studies were conducted to assess conditions to be used in bioreactors. Two insect cell lines, Trichoplusia ni (H5) and Spodoptera frugiperda (Sf9), were compared for their ability to produce rAAV-2 after infection with recombinant baculoviruses coding for the essential components of the vector. The effect of varying the ratio between individual baculoviruses and the effect of the overall multiplicity of infection (MOI), as well as the cell density at infection, were also examined. Infectious rAAV-2 particles were proportionally produced when increasing the individual MOI of BacRep virus up to 1.6. When equal amounts of each virus were used, a leveling effect occurred beyond an overall MOI of 5 and a maximum titer was obtained. Increasing the cell density at infection resulted in higher yields when infecting the cells in fresh medium; however, for the production of bioactive particles, an optimal peak cell density of approximately 1 x 10(6) cells/mL was observed without medium exchange. Infection in 3- and 20-L bioreactors was done at an overall MOI of 5 with a ratio of the three baculoviruses equal to 1:1:1. Under these conditions and infecting the cells in fresh medium, a total of approximately 2.2 x 10(12) infectious viral particles (bioactive particles) or 2.6 x 10(15) viral particles were produced in a 3-L bioreactor. Without replacing the medium at infection, similar titers were produced in 20 L. Our data demonstrates the feasibility of rAAV-2 production by BEVS at various scales in bioreactors and indicates that further optimization is required for production at high cell densities.

Adeno-associated virus: from defective virus to effective vector

The initial discovery of adeno-associated virus (AAV) mixed with adenovirus particles was not a fortuitous one but rather an expression of AAV biology. Indeed, as it came to be known, in addition to the unavoidable host cell, AAV typically needs a so-called helper virus such as adenovirus to replicate. Since the AAV life cycle revolves around another unrelated virus it was dubbed a satellite virus. However, the structural simplicity plus the defective and non-pathogenic character of this satellite virus caused recombinant forms to acquire centre-stage prominence in the current constellation of vectors for human gene therapy. In the present review, issues related to the development of recombinant AAV (rAAV) vectors, from the general principle to production methods, tropism modifications and other emerging technologies are discussed. In addition, the accumulating knowledge regarding the mechanisms of rAAV genome transduction and persistence is reviewed. The topics on rAAV vectorology are supplemented with information on the parental virus biology with an emphasis on aspects that directly impact on vector design and performance such as genome replication, genetic structure, and host cell entry.

Quantitative real-time PCR for titration of infectious recombinant AAV-2 particles

In this report, we present a fast, reliable and easy to perform method to quantify infectious titers of recombinant AAV-2 (rAAV-2) particles using the LightCycler technology, which is independent from the therapeutic transgene and without the presence of a marker gene. The method is based on the life cycle of AAV-2: after infection of the host cell, the single stranded (ss) AAV-2 genome is converted into a double stranded (ds) form. Following infection with rAAV-2, HeLa cells were lysed and ssDNA of transcriptionally inactive particles were efficiently removed by ssDNA-specific S1 nuclease digestion. The remaining viral dsDNA can be quantified by quantitative real-time PCR (qPCR). For validation of the new method, rAAV-2 preparations were analyzed by two other standard methods for titration of infectious particles in parallel, i.e. the infectious center assay (ICA) as well as flow cytometry using GFP as a marker. Comparing the infectious titers of 40 different AAV-2 fractions assessed by qPCR with the titers determined by FACS analysis a significant correlation (r=0.87, p<0.001) with a mean ratio of the titers assessed by qPCR and FACS of 1.92 (S.D.+/-1.59) was found. Further, the titers of seven rAAV-2 fractions using qPCR and ICA covering 5 log ranges were compared and a significant correlation was found between the results (r=0.80, p<0.001) with a mean ratio of 3.38 (S.D.+/-1.79), respectively.

Expression and subcellular targeting of canine parvovirus capsid proteins in baculovirus-transduced NLFK cells

A mammalian baculovirus delivery system was developed to study targeting in Norden Laboratories feline kidney (NLFK) cells of the capsid proteins of canine parvovirus (CPV), VP1 and VP2, or corresponding counterparts fused to EGFP. VP1 and VP2, when expressed alone, both had equal nuclear and cytoplasmic distribution. However, assembled form of VP2 had a predominantly cytoplasmic localization. When VP1 and VP2 were simultaneously present in cells, their nuclear localization increased. Thus, confocal immunofluorescence analysis of cells transduced with the different baculovirus constructs or combinations thereof in the absence or presence of infecting CPV revealed that the VP1 protein is a prerequisite for efficient targeting of VP2 to the nucleus. The baculovirus vectors were functional and the genes of interest efficiently introduced to this CPV susceptible mammalian cell line. Thus, we show evidence that the system could be utilized to study targeting of the CPV capsid proteins.

Adeno-associated virus type 2 VP2 capsid protein is nonessential and can tolerate large peptide insertions at its N terminus

Direct insertion of amino acid sequences into the adeno-associated virus type 2 (AAV) capsid open reading frame (cap ORF) is one strategy currently being developed for retargeting this prototypical gene therapy vector. While this approach has successfully resulted in the formation of AAV particles that have expanded or retargeted viral tropism, the inserted sequences have been relatively short, linear receptor binding ligands. Since many receptor-ligand interactions involve nonlinear, conformation-dependent binding domains, we investigated the insertion of full-length peptides into the AAV cap ORF. To minimize disruption of critical VP3 structural domains, we confined the insertions to residue 138 within the VP1-VP2 overlap, which has been shown to be on the surface of the particle following insertion of smaller epitopes. The insertion of coding sequences for the 8-kDa chemokine binding domain of rat fractalkine (CX3CL1), the 18-kDa human hormone leptin, and the 30-kDa green fluorescent protein (GFP) after residue 138 failed to lead to formation of particles due to the loss of VP3 expression. To test the ability to complement these insertions with the missing capsid proteins in trans, we designed a system for producing AAV vectors in which expression of one capsid protein is isolated and combined with the remaining two capsid proteins expressed separately. Such an approach allows for genetic modification of a specific capsid protein across its entire coding sequence leaving the remaining capsid proteins unaffected. An examination of particle formation from the individual components of the system revealed that genome-containing particles formed as long as the VP3 capsid protein was present and demonstrated that the VP2 capsid protein is nonessential for viral infectivity. Viable particles composed of all three capsid proteins were obtained from the capsid complementation groups regardless of which capsid proteins were supplied separately in trans. Significant overexpression of VP2 resulted in the formation of particles with altered capsid protein stoichiometry. The key finding was that by using this system we successfully obtained nearly wild-type levels of recombinant AAV-like particles with large ligands inserted after residue 138 in VP1 and VP2 or in VP2 exclusively. While insertions at residue 138 in VP1 significantly decreased infectivity, insertions at residue 138 that were exclusively in VP2 had a minimal effect on viral assembly or infectivity. Finally, insertion of GFP into VP1 and VP2 resulted in a particle whose trafficking could be temporally monitored by using confocal microscopy. Thus, we have demonstrated a method that can be used to insert large (up to 30-kDa) peptide ligands into the AAV particle. This system allows greater flexibility than current approaches in genetically manipulating the composition of the AAV particle and, in particular, may allow vector retargeting to alternative receptors requiring interaction with full-length conformation-dependent peptide ligands.

Construction of adeno-associated virus packaging plasmids and cells that directly select for AAV helper functions

Recombinant adeno-associated virus type 2 (rAAV) has promise for use as a gene therapy vector. Potential problems in the production of rAAV stocks are both the limited amount of recombinant virus that is produced by traditional methods and the possibility of wild-type replication competent adeno-associated virus (wtAAV) contamination. The presence of these contaminants is largely dependent upon the helper plasmid used. Whilst wtAAV is not a pathogen, the presence of these contaminants is undesirable as they may affect experiments concerning the biology of rAAV. Additionally as protocols using rAAV with altered tropism are becoming more prevalent, it is important that no recombination be permitted that may cause the creation of a replication competent AAV with modified (targeting) capsids. Many experimental protocols require the generation of large amounts of high titre rAAV stocks. We describe the production of several AAV helper plasmids and cell lines designed to achieve this goal. These plasmids possess split AAV rep and cap genes to eliminate the production of wtAAV and they possess a selection mechanism which is operatively linked to expression from the AAV cap gene. This allows positive selection of those cells expressing the highest level of the structural capsid proteins and therefore those cells which yield the highest amount of rAAV.

Receptor targeting of adeno-associated virus vectors

Adeno-associated virus (AAV) is a promising vector for human somatic gene therapy. However, its broad host range is a disadvantage for in vivo gene therapy, because it does not allow the selective tissue- or organ-restricted transduction required to enhance the safety and efficiency of the gene transfer. Therefore, increasing efforts are being made to target AAV-2-based vectors to specific receptors. The studies summarized in this review show that it is possible to target AAV-2 to a specific cell. So far, the most promising approach is the genetic modification of the viral capsid. However, the currently available AAV-2 targeting vectors need to be improved with regard to the elimination of the wild-type AAV-2 tropism and the improvement of infectious titers. The creation of highly efficient AAV-2 targeting vectors will also require a better understanding of the transmembrane and intracellular processing of this virus.

Addition of six-His-tagged peptide to the C terminus of adeno-associated virus VP3 does not affect viral tropism or production

Production of large quantities of recombinant adeno-associated virus (AAV) is difficult and not cost-effective. To overcome this problem, we have explored the feasibility of creating a recombinant AAV encoding a 6xHis tag on the VP3 capsid protein. We generated a plasmid vector containing a six-His (6xHis)-tagged AAV VP3. A second plasmid vector was generated that contained the full-length AAV capsid capable of producing VP1 and VP2, but not VP3 due to a mutation at position 2809 that encodes the start codon for VP3. These plasmids, necessary for production of AAV, were transfected into 293 cells to generate a 6xHis-tagged VP3mutant recombinant AAV. The 6xHis-tagged VP3 did not affect the formation of AAV virus, and the physical properties of the 6xHis-modified AAV were equivalent to those of wild-type particles. The 6xHis-tagged AAV did not affect the production titer of recombinant AAV and could be used to purify the recombinant AAV using an Ni-nitrilotriacetic acid column. Addition of the 6xHis tag did not alter the viral tropism compared to wild-type AAV. These observations demonstrate the feasibility of producing high-titer AAV containing a 6xHis-tagged AAV VP3 capsid protein and to utilize the 6xHis-tagged VP3 capsid to achieve high-affinity purification of this recombinant AAV.

Adenovirus and adeno-associated virus vectors

Recombinant adenovirus (rAd) and recombinant adeno-associated virus (rAAV) are among the most extensively used vectors in gene therapy studies to date. These two vectors share some similar features such as a broad host range and ability to infect both proliferating and quiescent cells. However, they also possess their own unique set of properties that render them particularly attractive for gene therapy applications. rAd vectors can accommodate larger inserts, mediate transient but high levels of protein expression, and can be easily produced at high titers. Development of gutted rAd vectors has further increased the cloning capacity of these vectors. The gaining popularity of rAAV use in gene therapy can be attributed to its lack of pathogenicity and added safety due to its replication defectiveness, and its ability to mediate long-term expression in a variety of tissues. Site-specific integration, as occurs with wild-type AAV, will be a unique and valuable feature if incorporated into rAAV vectors, further improving their safety. This paper describes these properties of rAd and rAAV vectors, and discusses further development and vector improvements that continue to extend the utility of these vectors, such as cell retargeting by capsid modification, differential transduction by use of serotypes, and extension of the cloning capacity of rAAV vectors by dual vector heterodimerization.

Adenovirus-facilitated nuclear translocation of adeno-associated virus type 2

We examined cytoplasmic trafficking and nuclear translocation of adeno-associated virus type 2 (AAV) by using Alexa Fluor 488-conjugated wild-type AAV, A20 monoclonal antibody immunocytochemistry, and subcellular fractionation techniques followed by DNA hybridization. Our results indicated that in the absence of adenovirus (Ad), AAV enters the cell rapidly and escapes from early endosomes with a t(1/2) of about 10 min postinfection. Cytoplasmically distributed AAV accumulated around the nucleus and persisted perinuclearly for 16 to 24 h. Viral uncoating occurred before or during nuclear entry beginning about 12 h postinfection, when viral protein and DNA were readily detected in the nucleus. Few, if any, intact AAV capsids were found in the nucleus. In the presence of Ad, however, cytoplasmic AAV quickly translocated into the nucleus as intact particles as early as 40 min after coinfection, and this facilitated nuclear translocation of AAV was not blocked by the nuclear pore complex inhibitor thapsigargan. The rapid nuclear translocation of intact AAV capsids in the presence of Ad suggested that one or more Ad capsid proteins might be altering trafficking. Indeed, coinfection with empty Ad capsids also resulted in the appearance of AAV DNA in nuclei within 40 min. Escape from early endosomes did not seem to be affected by Ad coinfection.

Insect cells as a factory to produce adeno-associated virus type 2 vectors

Recombinant adeno-associated viruses (rAAV) are produced transiently in mammalian cells usually by cotransfecting two or three plasmids containing AAV genes, adenovirus helper genes, and a vector genome. Expansion and transfection of adherent cells limit the scale of rAAV production. Efficient transfection is performed with cells on solid support media such as tissue culture plates. A large animal study or a human clinical trial may require 10(15) particles of vector, depending on dose. To generate this quantity of rAAV by transfection, more than 10(11) HEK293 cells may be needed, which would require about 5000 x 175 cm(2) flasks. The ability to scale up rAAV production by these methods severely restricts the commercialization and use of AAV vectors. A recombinant baculovirus derived from the Autographa californica nuclear polyhedrosis virus is widely employed for large-scale production of heterologous proteins in cultured insect cells and may provide an attractive alternative. Toward this goal, we have explored the production of rAAV in invertebrate cells. Sf9 cells may be coinfected in suspension cultures with three recombinant baculoviruses (a Rep-baculovirus, a VP-baculovirus, and an AAV ITR vector genome baculovirus) and, 3 days later, rAAV is recovered. The particles produced are indistinguishable from 293 cell-produced rAAV, as determined on the basis of physical properties and biologic activities. Particles produced by either method were composed of similar proteins and nucleic acid. The yield of genome-containing particles produced per Sf9 cell approached 5 x 10(4), thus, 1000 ml of cultured Sf9 cells produced the equivalent of between 500 to 1000 x 175 cm(2) flasks of 293 cells. This robust system provides a simple, cost-effective method for AAV vector production.

Fast and reliable titration of recombinant adeno-associated virus type-2 using quantitative real-time PCR

In this study, a quantitative real-time PCR (qPCR) was developed to determine genomic rAAV-2 titers using the Light-Cycler technology. Since the CMV promoter is the most commonly used promoter in gene therapeutic approaches, primers were designed which hybridize with the human CMV promoter sequence. PCR products were detected by the addition of SYBR green. qPCR of a 5 log spanning serial dilution of the vector plasmid containing one CMV promoter per plasmid molecule yielded a high amplification efficiency of 1.99 per cycle. To quantify the copy number of viral genomes, the qPCR curves of adeno-associated virus type 2 (AAV-2) samples were related to a standard curve assessed by the 5 log spanning serial vector plasmid dilution (0.01-100 pg DNA). For validation of the method, rAAV-2 preparations were analyzed by a standard method and qPCR in parallel. As standard method, flow cytometry was used for titration of infectious viral particles on HeLa cells using the Enhanced Green Fluorescent Protein as a marker. A significant correlation was found between the results obtained by flow cytometry and the results from the qPCR over a 5 log range (r=0.85, P<0.0001). The mean ratio between infectious rAAV-2 particles titrated via flow cytometry and genomic copies of rAAV-2 measured by qPCR of the same sample was 1:253. The higher titers found by qPCR might be due to multiple transduction of a single cell or to non-infectious particles generated during rAAV-2 preparation. In conclusion, qPCR is a fast and reliable method for determination of rAAV-2 titers and might be a powerful tool for standardization of rAAV-2 preparations particularly in the context of clinical studies.

The VP1 capsid protein of adeno-associated virus type 2 is carrying a phospholipase A2 domain required for virus infectivity

The unique region of the VP1 protein of parvoviruses was proposed to contain a parvoviral phospholipase A2 (pvPLA2) motif. Here, PLA2 activity is shown in the unique region of adeno-associated virus type 2 (AAV-2) VP1 when expressed as an isolated domain in bacteria. Mutations in this region of the capsid protein strongly reduced the infectivity of mutant virions in comparison to wild-type AAV-2. This correlated with effects on the activity of PLA2. The mutations had no influence on capsid assembly, packaging of viral genomes into particles or binding to and entry into HeLa cells. However, a delayed onset and reduced amount of early gene expression, as measured by Rep immunofluorescence, was observed. These results suggest that pvPLA2 activity is required for a step following perinuclear accumulation of virions but prior to early gene expression.

Insertional mutagenesis of the adeno-associated virus type 2 (AAV2) capsid gene and generation of AAV2 vectors targeted to alternative cell-surface receptors

Recombinant adeno-associated virus (AAV) vectors are of interest in the context of gene therapy because of their ability to mediate efficient transfer and stable expression of therapeutic genes in a wide variety of tissues. However, AAV-mediated gene delivery to specific cell populations is often precluded by the widespread distribution of heparan sulfate proteoglycan (HSPG), the primary cellular receptor for the virus. Conversely, an increasing number of cell types are being identified that do not express HSPG and are therefore poor targets for AAV-mediated gene transfer. To address these issues, we have developed strategies to physically modify AAV vectors and allow efficient, HSPG-independent, receptor-targeted infection. We began by generating a series of 38 virus capsid mutants containing peptide insertions at 25 unique sites within the AAV capsid protein. The mutant viruses were characterized on the basis of their phenotypes and grouped into three classes: class I mutants (4 of 38) did not assemble particles; class II mutants (14 of 38) assembled noninfectious particles; and class III mutants (20 of 38) assembled fully infectious particles. We examined the HSPG-binding characteristics of the class II mutants and showed that a defect in receptor binding was a common reason for their lack of infectivity. The display of foreign peptide epitopes on the surface of the mutant AAV particles was found to be highly dependent on the inclusion of appropriate scaffolding sequences. Optimal scaffolding sequences and five preferred sites for the insertion of targeting peptide epitopes were identified. These sites are located within each of the three AAV capsid proteins, and thus display inserted epitopes 3, 6, or 60 times per vector particle. Modified AAV vectors displaying a 15-amino acid peptide, which binds to the human luteinizing hormone receptor (LH-R), were generated and assessed for their ability to target gene delivery to receptor-bearing cell lines. Titers of these mutant vectors were essentially the same as wild-type vector. The LH-R-targeted vector was able to transduce ovarian cancer cells (OVCAR-3) in an HSPG-independent manner. Furthermore, transduction was shown to proceed via the LH-R and therefore treatment of OVCAR-3 cells with progesterone, to increase LH-R expression, accordingly increased LH mutant-mediated gene transfer. This technology may have a significant impact on the use of AAV vectors for human gene therapy.

Virus-mediated killing of cells that lack p53 activity

A major goal of molecular oncology is to identify means to kill cells lacking p53 function. Most current cancer therapy is based on damaging cellular DNA by irradiation or chemicals. Recent reports support the notion that, in the event of DNA damage, the p53 tumour-suppressor protein is able to prevent cell death by sustaining an arrest of the cell cycle at the G2 phase. We report here that adeno-associated virus (AAV) selectively induces apoptosis in cells that lack active p53. Cells with intact p53 activity are not killed but undergo arrest in the G2 phase of the cell cycle. This arrest is characterized by an increase in p53 activity and p21 levels and by the targeted destruction of CDC25C. Neither cell killing nor arrest depends upon AAV-encoded proteins. Rather, AAV DNA, which is single-stranded with hairpin structures at both ends, elicits in cells a DNA damage response that, in the absence of active p53, leads to cell death. AAV inhibits tumour growth in mice. Thus viruses can be used to deliver DNA of unusual structure into cells to trigger a DNA damage response without damaging cellular DNA and to selectively eliminate those cells lacking p53 activity.

DNA helicase-mediated packaging of adeno-associated virus type 2 genomes into preformed capsids

Helicases not only catalyse the disruption of hydrogen bonding between complementary regions of nucleic acids, but also move along nucleic acid strands in a polar fashion. Here we show that the Rep52 and Rep40 proteins of adeno-associated virus type 2 (AAV-2) are required to translocate capsid-associated, single-stranded DNA genomes into preformed empty AAV-2 capsids, and that the DNA helicase function of Rep52/40 is essential for this process. Furthermore, DNase protection experiments suggest that insertion of AAV-2 genomes proceeds from the 3' end, which correlates with the 3'-->5' processivity demonstrated for the Rep52/40 helicase. A model is proposed in which capsid-immobilized helicase complexes act as molecular motors to 'pump' single-stranded DNA across the capsid boundary.

Canine parvovirus capsid assembly and differences in mammalian and insect cells

We examined the assembly processes of the capsid proteins of canine parvovirus (CPV) in mammalian and insect cells. In CPV-infected cells empty capsids assembled within 15 min, and then continued to form over the following 1 h, while full (DNA-containing) capsids were detected only after 60 min, and those accumulated slowly over several hours. In cells expressing VP1 and VP2 or only VP2, empty capsid formation was also efficient, but was slightly slower than that in infected cells. Small amounts of trimer forms of VP2 were detected in cells expressing wild type capsid proteins, but were not seen for mutants containing changes that prevented capsid assembly. CPV capsids accumulated in the cell nucleus, but mutant VP1 and VP2 proteins that did not assemble became distributed throughout the nucleus and the cytoplasm, irrespective of whether they were expressed as VP1 and VP2, or as VP2 only. Urea or pH treatment of empty capsids released dimer, trimer, or pentamer capsid protein combinations, while treatment of full capsids consistently released trimer and, in some cases, pentamer forms. When wild type or assembly-defective VP2 genes were expressed from recombinant baculoviruses in insect cells, most of the protein was recovered as noncapsid aggregates, and only a small proportion assembled into capsids. Both the assembled capsids and the noncapsid aggregates were seen primarily in the cytoplasm of the insect cells. The VP2 expressed in insect cells that was recovered in aggregates had an isoelectric point of about pH 6.3, while that recovered from assembled capsids had a pI of about 5.2, similar to that seen for the VP2 of capsids recovered from mammalian cells.