Contribution of actin filaments and microtubules to quasi-in situ tensile properties and internal force balance of cultured smooth muscle cells on a substrate

Micro tensile tester measurement of biomechanical properties and adhesion force of microtubule-polymerization-inhibited cancer cells

Both mechanical and adhesion properties of cancer cells are complex and reciprocally related to migration, invasion, and metastasis with large cell deformation. Therefore, we evaluated these properties for human cervical cancer cells (HeLa) simultaneously using our previously developed micro tensile tester system. For efficient evaluation, we developed image analysis software to modify the system. The software can analyze the tensile force in real time. The modified system can evaluate the tensile stiffness of cells to which a large deformation is applied, also evaluate the adhesion strength of cancer cells that adhered to a culture substrate and were cultured for several days with their adhesion maturation. We used the modified system to simultaneously evaluate the stiffness of the cancer cells to which a large deformation was applied and their adhesion strength. The obtained results revealed that the middle phase of tensile stiffness and adhesion force of the microtubule-depolymerized group treated with colchicine (an anti-cancer drug) (stiffness, 13.4 ± 7.5 nN/%; adhesion force, 460.6 ± 258.2 nN) were over two times larger than those of the control group (stiffness, 5.0 ± 3.5 nN/%; adhesion force, 168.2 ± 98.0 nN). Additionally, the same trend was confirmed with the detailed evaluation of cell surface stiffness using an atomic force microscope. Confocal fluorescence microscope observations showed that the stress fibers (SFs) of colchicine-treated cells were aligned in the same direction, and focal adhesions (FAs) of the cells developed around both ends of the SFs and aligned parallel to the developed direction of the SFs. There was a possibility that the microtubule depolymerization by the colchicine treatment induced the development of SFs and FAs and subsequently caused an increment of cell stiffness and adhesion force. From the above results, we concluded the modified system would be applicable to cancer detection and anti-cancer drug efficacy tests.

Intracellular Macromolecular Crowding within Individual Stress Fibers Analyzed by Fluorescence Correlation Spectroscopy

Introduction

The diffusion of cell components such as proteins is crucial to the function of all living cells. The abundance of macromolecules in cells is likely to cause a state of macromolecular crowding, but its effects on the extent of diffusion remain poorly understood.

Methods

Here we investigate the diffusion rate in three distinct locations in mesenchymal cell types, namely the open cytoplasm, the stress fibers in the open cytoplasm, and those below the nucleus using three kinds of biologically inert green fluorescent proteins (GFPs), namely a monomer, dimer, and trimer GFP. Fluorescence correlation spectroscopy (FCS) was used to determine the diffusion coefficients.

Results

We show that diffusion tends to be lowered on average in stress fibers and is significantly lower in those located below the nucleus. Our data suggest that the diffusive properties of GFPs, and potentially other molecules as well, are hindered by macromolecular crowding. However, although the size dependence on protein diffusion was also studied for monomer, dimer, and trimer GFPs, there was no significant difference in the diffusion rates among the GFPs of these sizes. These results could be attributed to the lack of significant change in protein size among the selected GFP multimers.

Conclusion

The data presented here would provide a basis for better understanding of the complex protein diffusion in the nonuniform cytoplasm, shedding light on cellular responses to mechanical stress, their local mechanical properties, and reduced turnover in senescent cells.

The cyto-linker and scaffolding protein "plectin" mis-localization leads to softening of cancer cells

Discovering tools to prevent cancer progression requires understanding the fundamental differences between normal and cancer cells. More than a decade ago, atomic force microscopy (AFM) revealed cancer cells' softer body compared to their healthy counterparts. Here, we investigated the mechanism underlying the softening of cancerous cells in comparison with their healthy counterparts based on AFM high resolution stiffness tomography and 3D confocal microscopy. We showed microtubules (MTs) network in invasive ductal carcinoma cell cytoskeleton is basally located and segmented for around 400 nm from the cell periphery. Additionally, the cytoskeleton scaffolding protein plectin exhibits a mis-localization from the cytoplasm to the surface of cells in the carcinoma which justifies the dissociation of the MT network from the cell's cortex. Furthermore, the assessment of MTs' persistence length using a worm-like-chain (WLC) model in high resolution AFM images showed lower persistence length of the single MTs in ductal carcinoma compared to that in the normal state. Overall, these tuned mechanics support the invasive cells to ascertain more flexibility under compressive forces in small deformations. These data provide new insights into the structural origins of cancer aids in progression.

Multicellular dynamics on structured surfaces: Stress concentration is a key to controlling complex microtissue morphology on engineered scaffolds

Tissue engineers have utilised a variety of three-dimensional (3D) scaffolds for controlling multicellular dynamics and the resulting tissue microstructures. In particular, cutting-edge microfabrication technologies, such as 3D bioprinting, provide increasingly complex structures. However, unpredictable microtissue detachment from scaffolds, which ruins desired tissue structures, is becoming an evident problem. To overcome this issue, we elucidated the mechanism underlying collective cellular detachment by combining a new computational simulation method with quantitative tissue-culture experiments. We first quantified the stochastic processes of cellular detachment shown by vascular smooth muscle cells on model curved scaffolds and found that microtissue morphologies vary drastically depending on cell contractility, substrate curvature, and cell-substrate adhesion strength. To explore this mechanism, we developed a new particle-based model that explicitly describes stochastic processes of multicellular dynamics, such as adhesion, rupture, and large deformation of microtissues on structured surfaces. Computational simulations using the developed model successfully reproduced characteristic detachment processes observed in experiments. Crucially, simulations revealed that cellular contractility-induced stress is locally concentrated at the cell-substrate interface, subsequently inducing a catastrophic process of collective cellular detachment, which can be suppressed by modulating cell contractility, substrate curvature, and cell-substrate adhesion. These results show that the developed computational method is useful for predicting engineered tissue dynamics as a platform for prediction-guided scaffold design. STATEMENT OF SIGNIFICANCE: Microfabrication technologies aiming to control multicellular dynamics by engineering 3D scaffolds are attracting increasing attention for modelling in cell biology and regenerative medicine. However, obtaining microtissues with the desired 3D structures is made considerably more difficult by microtissue detachments from scaffolds. This study reveals a key mechanism behind this detachment by developing a novel computational method for simulating multicellular dynamics on designed scaffolds. This method enabled us to predict microtissue dynamics on structured surfaces, based on cell mechanics, substrate geometry, and cell-substrate interaction. This study provides a platform for the physics-based design of micro-engineered scaffolds and thus contributes to prediction-guided biomaterials design in the future.

Changes in the intra- and extra-mechanical environment of the nucleus in Saos-2 osteoblastic cells during bone differentiation process: Nuclear shrinkage and stiffening in cell differentiation

Osteogenic differentiation has been reportedly regulated by various mechanical stresses, including fluid shear stress and tensile and compressive loading. The promotion of osteoblastic differentiation by these mechanical stresses is accompanied by reorganization of the F-actin cytoskeleton, which is deeply involved in intracellular forces and the mechanical environment. However, there is limited information about the effect on the mechanical environment of the intracellular nucleus, such as the mechanical properties of the nucleus and intracellular forces exerted on the nucleus, which have recently been found to be directly involved in various cellular functions. Here, we investigated the changes in the intracellular force applied to the nucleus and the effect on nuclear morphology and mechanical properties during osteogenic differentiation in human osteoblast-like cells (Saos-2). We carried out cell morphological analyses with confocal fluorescence microscopy, nuclear indentation test with atomic force microscopy (AFM), and fluorescence recovery after photobleaching (FRAP) for intranuclear DNA. The results revealed that a significant reorganization of the F-actin cytoskeleton from the nuclear surfaces to the cell periphery occurred in the osteogenic differentiation processes, simultaneously with the reduction of compressive forces to the nucleus. Such changes also facilitated nuclear shrinkage and stiffening, and further intranuclear chromatin compaction. The results indicate that the reduction of the intracellular compressive force due to reorganization of the F-actin cytoskeleton affects the intra- and extra-mechanical environment of the nucleus, and this change may affect gene expression and DNA replication in the osteogenic differentiation process.

How do cells stiffen?

Cell stiffness is an important characteristic of cells and their response to external stimuli. In this review, we survey methods used to measure cell stiffness, summarize stimuli that alter cell stiffness, and discuss signaling pathways and mechanisms that control cell stiffness. Several pathological states are characterized by changes in cell stiffness, suggesting this property can serve as a potential diagnostic marker or therapeutic target. Therefore, we consider the effect of cell stiffness on signaling and growth processes required for homeostasis and dysfunction in healthy and pathological states. Specifically, the composition and structure of the cell membrane and cytoskeleton are major determinants of cell stiffness, and studies have identified signaling pathways that affect cytoskeletal dynamics both directly and by altered gene expression. We present the results of studies interrogating the effects of biophysical and biochemical stimuli on the cytoskeleton and other cellular components and how these factors determine the stiffness of both individual cells and multicellular structures. Overall, these studies represent an intersection of the fields of polymer physics, protein biochemistry, and mechanics, and identify specific mechanisms involved in mediating cell stiffness that can serve as therapeutic targets.

Targeting Microtubules for the Treatment of Heart Disease

Heart disease remains the leading cause of morbidity and mortality worldwide. With the advancement of modern technology, the role(s) of microtubules in the pathogenesis of heart disease has become increasingly apparent, though currently there are limited treatments targeting microtubule-relevant mechanisms. Here, we review the functions of microtubules in the cardiovascular system and their specific adaptive and pathological phenotypes in cardiac disorders. We further explore the use of microtubule-targeting drugs and highlight promising druggable therapeutic targets for the future treatment of heart diseases.

Mechanical programming of arterial smooth muscle cells in health and ageing

Arterial smooth muscle cells (ASMCs), the predominant cell type within the arterial wall, detect and respond to external mechanical forces. These forces can be derived from blood flow (i.e. pressure and stretch) or from the supporting extracellular matrix (i.e. stiffness and topography). The healthy arterial wall is elastic, allowing the artery to change shape in response to changes in blood pressure, a property known as arterial compliance. As we age, the mechanical forces applied to ASMCs change; blood pressure and arterial wall rigidity increase and result in a reduction in arterial compliance. These changes in mechanical environment enhance ASMC contractility and promote disease-associated changes in ASMC phenotype. For mechanical stimuli to programme ASMCs, forces must influence the cell's load-bearing apparatus, the cytoskeleton. Comprised of an interconnected network of actin filaments, microtubules and intermediate filaments, each cytoskeletal component has distinct mechanical properties that enable ASMCs to respond to changes within the mechanical environment whilst maintaining cell integrity. In this review, we discuss how mechanically driven cytoskeletal reorganisation programmes ASMC function and phenotypic switching.

Reversible Corneal Endothelial Abnormalities With Netarsudil

PURPOSE

To report a case of reversible corneal endothelial abnormalities after treatment with netarsudil.

OBSERVATION

A 68-year-old woman presented with the complaint of blurred vision soon after starting treatment with the fixed-dose combination of netarsudil and latanoprost (FC-netarsudil-latanoprost). She had been receiving the fixed-dose combination of dorzolamide and timolol and latanoprost for primary open-angle glaucoma until her ophthalmologist switched latanoprost to FC-netarsudil-latanoprost 2 months before referral to our center.Best-corrected visual acuity was 20/20-1 in the right eye and 20/20-3 in the left eye. The slit-lamp biomicroscopic examination was remarkable for a guttata-like abnormality of the corneal endothelium of both eyes. The intraocular pressure was 10 mm Hg in both eyes. Specular microscopy revealed irregularly shaped corneal endothelial cells with indistinct borders between cells. FC-netarsudil-latanoprost was replaced with latanoprost in the left eye but continued in the right eye. Nine weeks later, best-corrected visual acuity remained 20/20-1 in the right eye but it improved to 20/20 in the left eye. Repeat specular microscopy was unchanged in the right eye and was normal in the left eye.

CONCLUSION AND IMPORTANCE

Topical therapy with netarsudil can result in guttata-like changes of the corneal endothelium and corneal endothelial cell abnormalities that can be detected with specular microscopy. These abnormalities seem to be transient and resolved upon the cessation of netarsudil. Ophthalmologists should consider the possibility of a corneal endothelial abnormality in patients treated with netarsudil who develop blurred vision.

Nonlinear Elastic and Inelastic Properties of Cells

Mechanical forces play an important role in various physiological processes, such as morphogenesis, cytokinesis, and migration. Thus, in order to illuminate mechanisms underlying these physiological processes, it is crucial to understand how cells deform and respond to external mechanical stimuli. During recent decades, the mechanical properties of cells have been studied extensively using diverse measurement techniques. A number of experimental studies have shown that cells are far from linear elastic materials. Cells exhibit a wide variety of nonlinear elastic and inelastic properties. Such complicated properties of cells are known to emerge from unique mechanical characteristics of cellular components. In this review, we introduce major cellular components that largely govern cell mechanical properties and provide brief explanations of several experimental techniques used for rheological measurements of cell mechanics. Then, we discuss the representative nonlinear elastic and inelastic properties of cells. Finally, continuum and discrete computational models of cell mechanics, which model both nonlinear elastic and inelastic properties of cells, will be described.

Macroscopic and microscopic analysis of the mechanical properties and adhesion force of cells using a single cell tensile test and atomic force microscopy: Remarkable differences in cell types

Many experimental techniques have been reported to provide knowledge of the mechanical behavior of cells from biomechanical viewpoints, however, it is unclear how the intercellular structural differences influence macroscopic and microscopic mechanical properties of cells. The aim of our study is to clarify the comprehensive mechanical properties and cell-substrate adhesion strength of cells, and the correlation with intracellular structure in different cell types. We developed an originally designed micro tensile tester, and performed a single cell tensile test to estimate whole cell tensile stiffness and adhesion strength of normal vascular smooth muscle cells (VSMCs) and cervical cancer HeLa cells: one half side of the specimen cell was lifted up by a glass microneedle, then stretched until the cell detached from the substrate, while force was simultaneously measured. The tensile stiffness and adhesion strength were 49 ± 10 nN/% and 870 ± 430 nN, respectively, in VSMCs (mean ± SD, n = 8), and 19 ± 17 nN/% and 320 ± 160 nN, respectively, in HeLa cells (n = 9). The difference was more definite in the surface elastic modulus map obtained by atomic force microscopy, indicating that the internal tension of the actin cytoskeleton was significantly higher in VSMCs than in HeLa cells. Structural analysis with confocal microscopy revealed that VSMCs had a significant alignment of F-actin cytoskeleton with mature focal adhesion, contrary to the randomly oriented F-actin with smaller focal adhesion of HeLa cells, indicating that structural arrangement of the actin cytoskeleton and their mechanical tension generated the differences in cell mechanical properties and adhesion forces. The finding strongly suggests that the mechanical and structural differences in each cell type are deeply involved with their physiological functions.

Altered mechanics of vaginal smooth muscle cells due to the lysyl oxidase-like1 knockout

The remodeling mechanisms that cause connective tissue of the vaginal wall, consisting mostly of smooth muscle, to weaken after vaginal delivery are not fully understood. Abnormal remodeling after delivery can contribute to development of pelvic organ prolapse and other pelvic floor disorders. The present study used vaginal smooth muscle cells (vSMCs) isolated from knockout mice lacking the expression of the lysyl oxidase-like1 (LOXL1) enzyme, a well-characterized animal model for pelvic organ prolapse. We tested if vaginal smooth muscle cells from LOXL1 knockout mice have altered mechanics including stiffness and surface adhesion. Using atomic force microscopy, we performed nanoindentations on both isolated and confluent cells to evaluate the effect of LOXL1 knockout on in vitro cultures of vSMCs cells from nulliparous mice. The results show that LOXL1 knockout vSMCs have increased stiffness in pre-confluent but decreased stiffness in confluent cultures (p* < 0.05) and significant decreased surface adhesion in pre-confluent cultures (p* < 0.05). This study provides evidence that the weakening of vaginal connective tissue in the absense of LOXL1 changes the mechanical properties of the vSMCs. STATEMENT OF SIGNIFICANCE: Pelvic organ prolapse is a common condition affecting millions of women worldwide, which significantly impacts their quality of life. Alterations in vaginal and pelvic floor mechanical properties can change their ability to support the pelvic organs. This study provides evidence of altered stiffness of vaginal smooth muscle cells from mice resembling pelvic organ prolapse. The results from this study set a foundation to develop pathophysiology-driven therapies focused on the interplay between smooth muscle mechanics and extracellular matrix remodeling.

A Finite Element Bendo-Tensegrity Model of Eukaryotic Cell

Mechanical interaction of cell with extracellular environment affects its function. The mechanisms by which mechanical stimuli are sensed and transduced into biochemical responses are still not well understood. Considering this, two finite element (FE) bendo-tensegrity models of a cell in different states are proposed with the aim to characterize cell deformation under different mechanical loading conditions: a suspended cell model elucidating the global response of cell in tensile test simulation and an adherent cell model explicating its local response in atomic force microscopy (AFM) indentation simulation. The force-elongation curve obtained from tensile test simulation lies within the range of experimentally obtained characteristics of smooth muscle cells (SMCs) and illustrates a nonlinear increase in reaction force with cell stretching. The force-indentation curves obtained from indentation simulations lie within the range of experimentally obtained curves of embryonic stem cells (ESCs) and exhibit the influence of indentation site on the overall reaction force of cell. Simulation results have demonstrated that actin filaments (AFs) and microtubules (MTs) play a crucial role in the cell stiffness during stretching, whereas actin cortex (AC) along with actin bundles (ABs) and MTs are essential for the cell rigidity during indentation. The proposed models quantify the mechanical contribution of individual cytoskeletal components to cell mechanics and the deformation of nucleus under different mechanical loading conditions. These results can aid in better understanding of structure-function relationships in living cells.

Curvotaxis directs cell migration through cell-scale curvature landscapes

Cells have evolved multiple mechanisms to apprehend and adapt finely to their environment. Here we report a new cellular ability, which we term “curvotaxis” that enables the cells to respond to cell-scale curvature variations, a ubiquitous trait of cellular biotopes. We develop ultra-smooth sinusoidal surfaces presenting modulations of curvature in all directions, and monitor cell behavior on these topographic landscapes. We show that adherent cells avoid convex regions during their migration and position themselves in concave valleys. Live imaging combined with functional analysis shows that curvotaxis relies on a dynamic interplay between the nucleus and the cytoskeleton—the nucleus acting as a mechanical sensor that leads the migrating cell toward concave curvatures. Further analyses show that substratum curvature affects focal adhesions organization and dynamics, nuclear shape, and gene expression. Altogether, this work identifies curvotaxis as a new cellular guiding mechanism and promotes cell-scale curvature as an essential physical cue.

The effect that microscale surface curvature has on cell migration has not been evaluated. Here the authors fabricate sinusoidal 3D surfaces and show that the cell nucleus and cytoskeleton cooperate to guide cells to concave valleys in a process they coin curvotaxis.

A REVIEW OF TWO-DIMENSIONAL IN VITRO CELL STRETCH PLATFORMS

The focus of this paper is to describe the mechanism and behavior of two-dimensional in vitro cell stretch platforms, as well as discussing designs for the evaluation of mechanical properties of cells. It is extremely important to understand the cellular response to extrinsic mechanical forces as living biological system is constantly subjected to mechanical forces in vivo. In addition, this mechanistic understanding of cellular response will provide valuable information towards the design and fabrication of bioengineered tissues and organs, which are expected to replace and/or aid bodily functions. This paper will primarily focus on the development, advantages and limitations of two-dimensional cell stretch platforms.

Hypergravity down-regulates c-fos gene expression via ROCK/Rho-GTP and the PI3K signaling pathway in murine ATDC5 chondroprogenitor cells

Chondrocytes are known to be physiologically loaded with diverse physical factors such as compressive stress, shear stress and hydrostatic pressure. Although the effects of those mechanical stimuli onto various cell models have been widely studied, those of hypergravity have not yet been revealed clearly. Hereby, we hypothesized that the hypergravity affects relative positions of intracellular elements including nucleus and cytoskeletons due to their density differences, triggering mechanotransduction in the cell. The aim of this study was to investigate the effect of hypergravity on c-fos expression in the murine ATDC5 chondroprogenitor cells, as c-fos is a well known key regulator of cell proliferation and differentiation, including in chondrocytes. We first found that hypergravity down-regulated c-fos expression transiently via ROCK/Rho-GTP and PI3K signaling, and the down-regulation was suppressed by inhibition of actin polymerization.

Multiphasic stress relaxation response of freshly isolated and cultured vascular smooth muscle cells measured by quasi-in situ tensile test

Vascular smooth muscle cells (SMCs) undergo a phenotypic change from a contractile to a synthetic state under pathological conditions, such as atherogenesis and restenosis. Although the viscoelastic properties of SMCs are of particular interest because of their role in the development of these vascular diseases, the effects of phenotypic changes on their viscoelastic properties are unclear at this stage. We performed the stress relaxation test at constant strain (ε=30%) for the freshly isolated contractile SMCs (FSMCs) and the cultured synthetic SMCs (CSMCs) maintaining in situ cell shape and cytoskeletal integrity. We also investigated the effect of extracellular Ca2+ on their viscoelastic behaviors. FSMCs and CSMCs exhibited multiphasic stress relaxation, which consisted of rapid relaxation, occurring on a time scale of several seconds and several 10 seconds, and slow relaxation occurring on a time scale of 1000 seconds. The estimated elastic modulus of CSMCs was less than one-half that of FSMCs, that was associated with a decreased of amount of actin stress fibers (SFs) during the transition from contractile to synthetic phenotypes. FSMCs showed a conservation of tension with extracellular Ca2+ following rapid stress relaxation. In contrast, CSMCs showed a consecutive decrease in tension independent of Ca2+. This suggests that the decrease in tension in a long time scale may be involved in mechanical remodeling of SFs induced through a Rho-dependent pathway, which is Ca2+-independent and become predominant in the transition from contractile to synthetic phenotypes.

Morphological Changes of Human Corneal Endothelial Cells after Rho-Associated Kinase Inhibitor Eye Drop (Ripasudil) Administration: A Prospective Open-Label Clinical Study

Purpose

To investigate the effect and safety of a selective Rho kinase inhibitor, ripasudil 0.4% eye drops, on corneal endothelial cells of healthy subjects.

Design

Prospective, interventional case series.

Methods

In this study, 6 healthy subjects were administered ripasudil 0.4% in the right eye twice daily for 1 week. Morphological changes and corneal endothelial cell density were examined by noncontact and contact specular microscopy. Central corneal thickness and corneal volume of 5 mm-diameter area of center cornea were analyzed by Pentacam Scheimpflug topography. All the above measurements were conducted in both eyes before administration, 1.5 and 6 hours after the initial administration on day 0; and in the same manner after the final administration on day 7.

Results

By noncontact specular microscopy, indistinct cell borders with pseudo guttae were observed, but by contact specular microscopy, morphological changes of corneal endothelial cells were mild and pseudo guttae was not observed after single and repeated administration of ripasudil in all subjects. These changes resolved prior to the next administration, and corneal endothelial cell density, central corneal thickness and corneal volume were not changed throughout the study period.

Conclusion

Transient morphological changes of corneal endothelial cells such as indistinct cell borders with pseudo guttae were observed by noncontact specular microscopy in healthy subjects after ripasudil administration. Corneal edema was not observed and corneal endothelial cell density did not decrease after 1 week repetitive administration. These morphological changes were reversible and corneal endothelial cell morphology returned to normal prior to the next administration.

Trial Registration

JAPIC Clinical Trials Information 142705

Mechanical trapping of the nucleus on micropillared surfaces inhibits the proliferation of vascular smooth muscle cells but not cervical cancer HeLa cells

The interaction between cells and the extracellular matrix on a topographically patterned surface can result in changes in cell shape and many cellular functions. In the present study, we demonstrated the mechanical deformation and trapping of the intracellular nucleus using polydimethylsiloxane (PDMS)-based microfabricated substrates with an array of micropillars. We investigated the differential effects of nuclear deformation on the proliferation of healthy vascular smooth muscle cells (SMCs) and cervical cancer HeLa cells. Both types of cell spread normally in the space between micropillars and completely invaded the extracellular microstructures, including parts of their cytoplasm and their nuclei. We found that the proliferation of SMCs but not HeLa cells was dramatically inhibited by cultivation on the micropillar substrates, even though remarkable deformation of nuclei was observed in both types of cells. Mechanical testing with an atomic force microscope and a detailed image analysis with confocal microscopy revealed that SMC nuclei had a thicker nuclear lamina and greater expression of lamin A/C than those of HeLa cells, which consequently increased the elastic modulus of the SMC nuclei and their nuclear mechanical resistance against extracellular microstructures. These results indicate that the inhibition of cell proliferation resulted from deformation of the mature lamin structures, which might be exposed to higher internal stress during nuclear deformation. This nuclear stress-induced inhibition of cell proliferation occurred rarely in cancer cells with deformable nuclei.

A biomechanical perspective on stress fiber structure and function

Stress fibers are actomyosin-based bundles whose structural and contractile properties underlie numerous cellular processes including adhesion, motility and mechanosensing. Recent advances in high-resolution live-cell imaging and single-cell force measurement have dramatically sharpened our understanding of the assembly, connectivity, and evolution of various specialized stress fiber subpopulations. This in turn has motivated interest in understanding how individual stress fibers generate tension and support cellular structure and force generation. In this review, we discuss approaches for measuring the mechanical properties of single stress fibers. We begin by discussing studies conducted in cell-free settings, including strategies based on isolation of intact stress fibers and reconstitution of stress fiber-like structures from purified components. We then discuss measurements obtained in living cells based both on inference of stress fiber properties from whole-cell mechanical measurements (e.g., atomic force microscopy) and on direct interrogation of single stress fibers (e.g., subcellular laser nanosurgery). We conclude by reviewing various mathematical models of stress fiber function that have been developed based on these experimental measurements. An important future challenge in this area will be the integration of these sophisticated biophysical measurements with the field's increasingly detailed molecular understanding of stress fiber assembly, dynamics, and signal transduction. This article is part of a Special Issue entitled: Mechanobiology.

Recovery of altered neuromuscular junction morphology and muscle function in mdx mice after injury

Duchenne muscular dystrophy (DMD) is a devastating neuromuscular disease in which weakness, increased susceptibility to muscle injury, and inadequate repair underlie the pathology. While most attention has focused within the muscle fiber, we recently demonstrated significant alterations in the neuromuscular junction (NMJ) morphology and resulting neuromuscular transmission failure (NTF) 24 h after injury in mdx mice (murine model for DMD). Here we determine the contribution of NMJ morphology and NTF to the recovery of muscle contractile function post-injury. NMJ morphology and NTF rates were assessed day 0 (immediately after injury) and days 1, 7, 14 and 21 after quadriceps injury. Eccentric injury of the quadriceps resulted in a significant loss of maximal torque in both WT (39 ± 6 %) and mdx (76 ± 8 %) with a full recovery in WT by day 7 and in mdx by day 21. Post-injury alterations in NMJ morphology and NTF were found only in mdx, were limited to days 0 and 1, and were independent of changes in MuSK or AChR expression. Such early changes at the NMJ after injury are consistent with mechanical disruption rather than newly forming NMJs. Furthermore, we show that the dense microtubule network that underlies the NMJ is significantly reduced and disorganized in mdx compared to WT. These structural changes at the NMJ may play a role in the increased NMJ disruption and the exaggerated loss of nerve-evoked muscle force seen after injury to dystrophic muscles.

Mechanisms of Myofascial Pain

Myofascial pain syndrome is an important health problem. It affects a majority of the general population, impairs mobility, causes pain, and reduces the overall sense of well-being. Underlying this syndrome is the existence of painful taut bands of muscle that contain discrete, hypersensitive foci called myofascial trigger points. In spite of the significant impact on public health, a clear mechanistic understanding of the disorder does not exist. This is likely due to the complex nature of the disorder which involves the integration of cellular signaling, excitation-contraction coupling, neuromuscular inputs, local circulation, and energy metabolism. The difficulties are further exacerbated by the lack of an animal model for myofascial pain to test mechanistic hypothesis. In this review, current theories for myofascial pain are presented and their relative strengths and weaknesses are discussed. Based on new findings linking mechanoactivation of reactive oxygen species signaling to destabilized calcium signaling, we put forth a novel mechanistic hypothesis for the initiation and maintenance of myofascial trigger points. It is hoped that this lays a new foundation for understanding myofascial pain syndrome and how current therapies work, and gives key insights that will lead to the improvement of therapies for its treatment.

Measuring Mechanical Properties of Cell Sheets by a Tensile Test Using a Self-Attachable Fixture

In this paper, we present a tensile test system and a new self-attachable fixture for measuring mechanical properties of cell sheets. Previously when measuring the mechanical properties of cell sheets, the sheets would be damaged because they dried out. With our system, the tensile test can be carried out while the cell sheets are in the culture medium, so there is no damage by drying. Previously, it has also been difficult to attach a cell sheet in the tensile test system owing to the structure of the conventional fixture, and there has been no tensile test system which had a measurement range that covered the tension force range of the cell sheets. Therefore, we have addressed these problems by developing a self-attachable fixture and a tensile test system. To confirm suitability of the fixture and test system, we measured mechanical properties of two different kinds of cultured cell sheets, C2C12 (cells mouse myoblast cells) and NIH-3T3 (3T3) cells (mouse fibroblast cells), and of the same kinds of sheets treated with cytochalasin-D. We confirmed differences in mechanical properties for each kind of cell sheet. This indicates that our new fixture and test system are applicable for measurement of mechanical properties of cell sheets without damage of the sheets by drying.

Directional migration of leading-edge mesoderm generates physical forces: Implication in Xenopus notochord formation during gastrulation

Gastrulation is a dynamic tissue-remodeling process occurring during early development and fundamental to the later organogenesis. It involves both chemical signals and physical factors. Although much is known about the molecular pathways involved, the roles of physical forces in regulating cellular behavior and tissue remodeling during gastrulation have just begun to be explored. Here, we characterized the force generated by the leading edge mesoderm (LEM) that migrates preceding axial mesoderm (AM), and investigated the contribution of LEM during Xenopus gastrulation. First, we constructed an assay system using micro-needle which could measure physical forces generated by the anterior migration of LEM, and estimated the absolute magnitude of the force to be 20-80nN. Second, laser ablation experiments showed that LEM could affect the force distribution in the AM (i.e. LEM adds stretch force on axial mesoderm along anterior-posterior axis). Third, migrating LEM was found to be necessary for the proper gastrulation cell movements and the establishment of organized notochord structure; a reduction of LEM migratory activity resulted in the disruption of mediolateral cell orientation and convergence in AM. Finally, we found that LEM migration cooperates with Wnt/PCP to form proper notochord. These results suggest that the force generated by the directional migration of LEM is transmitted to AM and assists the tissue organization of notochord in vivo independently of the regulation by Wnt/PCP. We propose that the LEM may have a mechanical role in aiding the AM elongation through the rearrangement of force distribution in the dorsal marginal zone.

A multi-structural single cell model of force-induced interactions of cytoskeletal components

Several computational models based on experimental techniques and theories have been proposed to describe cytoskeleton (CSK) mechanics. Tensegrity is a prominent model for force generation, but it cannot predict mechanics of individual CSK components, nor explain the discrepancies from the different single cell stimulating techniques studies combined with cytoskeleton-disruptors. A new numerical concept that defines a multi-structural 3D finite element (FE) model of a single-adherent cell is proposed to investigate the biophysical and biochemical differences of the mechanical role of each cytoskeleton component under loading. The model includes prestressed actin bundles and microtubule within cytoplasm and nucleus surrounded by the actin cortex. We performed numerical simulations of atomic force microscopy (AFM) experiments by subjecting the cell model to compressive loads. The numerical role of the CSK components was corroborated with AFM force measurements on U2OS-osteosarcoma cells and NIH-3T3 fibroblasts exposed to different cytoskeleton-disrupting drugs. Computational simulation showed that actin cortex and microtubules are the major components targeted in resisting compression. This is a new numerical tool that explains the specific role of the cortex and overcomes the difficulty of isolating this component from other networks in vitro. This illustrates that a combination of cytoskeletal structures with their own properties is necessary for a complete description of cellular mechanics.

Segmentation and morphometric analysis of cells from fluorescence microscopy images of cytoskeletons

We developed a method to reconstruct cell geometry from confocal fluorescence microscopy images of the cytoskeleton. In the method, region growing was implemented twice. First, it was applied to the extracellular regions to differentiate them from intracellular noncytoskeletal regions, which both appear black in fluorescence microscopy imagery, and then to cell regions for cell identification. Analysis of morphological parameters revealed significant changes in cell shape associated with cytoskeleton disruption, which offered insight into the mechanical role of the cytoskeleton in maintaining cell shape. The proposed segmentation method is promising for investigations on cell morphological changes with respect to internal cytoskeletal structures.

Jun N-terminal kinase maintains tissue integrity during cell rearrangement in the gut

Tissue elongation is a fundamental morphogenetic process that generates the proper anatomical topology of the body plan and vital organs. In many elongating embryonic structures, tissue lengthening is driven by Rho family GTPase-mediated cell rearrangement. During this dynamic process, the mechanisms that modulate intercellular adhesion to allow individual cells to change position without compromising structural integrity are not well understood. In vertebrates, Jun N-terminal kinase (JNK) is also required for tissue elongation, but the precise cellular role of JNK in this context has remained elusive. Here, we show that JNK activity is indispensable for the rearrangement of endoderm cells that underlies the elongation of the Xenopus gut tube. Whereas Rho kinase is necessary to induce cell intercalation and remodel adhesive contacts, we have found that JNK is required to maintain cell-cell adhesion and establish parallel microtubule arrays; without JNK activity, the reorganizing endoderm dissociates. Depleting polymerized microtubules phenocopies this effect of JNK inhibition on endoderm morphogenesis, consistent with a model in which JNK regulates microtubule architecture to preserve adhesive contacts between rearranging gut cells. Thus, in contrast to Rho kinase, which generates actomyosin-based tension and cell movement, JNK signaling is required to establish microtubule stability and maintain tissue cohesion; both factors are required to achieve proper cell rearrangement and gut extension. This model of gut elongation has implications not only for the etiology of digestive tract defects, but sheds new light on the means by which intra- and intercellular forces are balanced to promote topological change, while preserving structural integrity, in numerous morphogenetic contexts.

The Deformation Rate of Smooth Muscle Cells in Vessel Walls After Short-Duration Heating Dilatation in a Porcine Model Ex Vivo and In Vivo

We have proposed a novel short-duration thermal angioplasty with uniform temperature distribution. Although the dilatation mechanism of our short-duration heating dilatation was reported in our previous study, the influences on smooth muscle cells (SMCs) are not sufficiently understood. We studied the influences on SMCs in terms of shape change and discussed the relationship between the SMCs' shape change and dilatation mechanism ex vivo and in vivo. We found that the SMCs were fixed in the stretched condition after our short-duration heating dilatation both ex vivo and in vivo. The deformation rate of SMCs' shape, measured by the cells' nuclei, was increased with rising balloon maximum temperature (T(balloon)), and the same tendency was observed for the arterial dilatation rate. We hypothesize that the SMCs were fixed in the stretched condition because the arterial dilatation with our short-duration heating dilatation was performed without any plastic deformations of the vessel wall, causing the vessel wall itself to be stretched. We also prospect that the reasons for the positive correlation between the deformation rate of SMCs' shape and T(balloon) are that (i) the area heated over 60 °C was expanded with rising T(balloon), and (ii) the arterial dilatation rate was also increased with rising T(balloon).

Contribution of actin filaments to the global compressive properties of fibroblasts

Actin filaments are often regarded as tension-bearing components. Here, we examined the effects of actin filaments on global compressive properties of cells experimentally and numerically. Fibroblasts were harvested from the patellar tendon of a mature Japanese white rabbit and treated with cytochalasin D to depolymerize the actin filaments. Intact cells and cells with disrupted actin filaments were subjected to the compressive tests. Each floating cell was held between the cantilever and compressive plates and compressed by moving the compressive plate with a linear actuator to obtain a load-deformation curve under quasi-static conditions. The experimental results demonstrated that the initial stiffness of a cell with disrupted actin filaments decreased by 51%. After the experiments, we simulated the compressive test of cells with/without bundles of actin filaments. A bundle of actin filaments was modeled as a tension-bearing component that generates a force based on Hooke's law only when it was elongated. By contrast, if it was shortened, it was assumed to exert no force. The computational results revealed that the alignment of bundles of actin filaments significantly affected the cell stiffness. In addition, the passive reorientation of bundles of actin filaments perpendicular to the compression induced an increase in the resistance to the vertical elongation of a cell and thereby increased the cell stiffness. These results clearly indicated that bundles of actin filaments contribute to the compressive properties of a cell, even if they are tension-bearing components.

Strain waveform dependence of stress fiber reorientation in cyclically stretched osteoblastic cells: effects of viscoelastic compression of stress fibers

Actin stress fibers (SFs) of cells cultured on cyclically stretched substrate tend to reorient in the direction in which a normal strain of substrate becomes zero. However, little is known about the mechanism of this reorientation. Here we investigated the effects of cyclic stretch waveform on SF reorientation in osteoblastic cells. Cells adhering to silicone membranes were subjected to cyclic uniaxial stretch, having one of the following waveforms with an amplitude of 8% for 24 h: triangular, trapezoid, bottom hold, or peak hold. SF reorientation of these cells was then analyzed. No preferential orientation was observed for the triangular and the peak-hold waveforms, whereas SFs aligned mostly in the direction with zero normal strain (∼55°) with other waveforms, especially the trapezoid waveform, which had a hold time both at loaded and unloaded states. Viscoelastic properties of SFs were estimated in a quasi-in situ stress relaxation test using intact and SF-disrupted cells that maintained their shape on the substrate. The dynamics of tension FSFsacting on SFs during cyclic stretching were simulated using these properties. The simulation demonstrated that FSFsdecreased gradually during cyclic stretching and exhibited a compressive value (FSFs< 0). The magnitude and duration time of the compressive forces were relatively larger in the group with a trapezoid waveform. The frequency of SF orientation had a significant negative correlation with the applied compressive forces integrated with time in a strain cycle, and the integrated value was largest with the trapezoid waveform. These results may indicate that the applied compressive forces on SFs have a significant effect on the stretch-induced reorientation of SFs, and that SFs realigned to avoid their compression. Stress relaxation of SFs might be facilitated during the holding period in the trapezoid waveform, and depolymerization and reorientation of SFs were significantly accelerated by their viscoelastic compression.

Decreased myosin phosphatase target subunit 1(MYPT1) phosphorylation via attenuated rho kinase and zipper-interacting kinase activities in edematous intestinal smooth muscle

BACKGROUND

Intestinal edema development after trauma resuscitation inhibits intestinal motility which results in ileus, preventing enteral feeding and compromising patient outcome. We have shown previously that decreased intestinal motility is associated with decreased smooth muscle myosin light chain (MLC) phosphorylation. The purpose of the present study was to investigate the mechanism of edema-induced decreases in MLC in a rodent model of intestinal edema.

METHODS

Intestinal edema was induced by a combination of resuscitation fluid administration and mesenteric venous hypertension. Sham operated animals served as controls. Contractile activity and alterations in the regulation of MLC including the regulation of MLC kinase (MLCK) and MLC phosphatase (MLCP) were measured.

KEY RESULTS

Contraction amplitude and basal tone were significantly decreased in edematous intestinal smooth muscle compared with non-edematous tissue. Calcium sensitivity was also decreased in edematous tissue compared with non-edematous intestinal smooth muscle. Although inhibition of MLCK decreased contractile activity significantly less in edematous tissue compared with non-edematous tissue, MLCK activity in tissue lysates was not significantly different. Phosphorylation of MYPT was significantly lower in edematous tissue compared with non-edematous tissue. In addition, activities of both rho kinase and zipper-interacting kinase were significantly lower in edematous tissue.

CONCLUSIONS & INFERENCES

We conclude from these data that interstitial intestinal edema inhibits MLC phosphorylation predominantly by decreasing inhibitory phosphorylation of the MLC targeting subunit (MYPT1) of MLC phosphatase via decreased ROCK and ZIPK activities, resulting in more MLC phosphatase activity.

Thromboxane-induced actin polymerization in hypoxic pulmonary artery is independent of Rho

Actin polymerization (APM), regulated by Rho GTPases, promotes myocyte force generation. Hypoxia is known to impede postnatal disassembly of the actin cytoskeleton in pulmonary arterial (PA) myocytes. We compared basal and agonist-induced APM in myocytes from PA and descending aorta (Ao), under hypoxic and normoxic conditions. We also examined effects of thromboxane challenge on force generation and cytoskeletal assembly in resistance PA and renal arteries from neonatal swine with persistent pulmonary hypertension (PPHN) induced by 72-h normobaric hypoxia, compared with age-matched controls. Synthetic and contractile phenotype myocytes from neonatal porcine PA or Ao were grown in hypoxia (10% O2) or normoxia (21% O2) for 7 days, then challenged with 10−6 M thromboxane mimetic U46619. F/G actin ratio was quantified by laser-scanning cytometry and by cytoskeletal fractionation. Thromboxane receptor (TP) G protein coupling was measured by immunoprecipitation and probing for Gαq, G12, or G13, RhoA activation by Rhotekin-RBD affinity precipitation, and LIM kinase (LIMK) and cofilin phosphorylation by Western blot. Isometric force to serial concentrations of U46619 was measured in muscular pulmonary and renal arteries from PPHN and control swine; APM was quantified in fixed contracted vessels. Contractile PA myocytes exhibit marked Rho-dependent APM in hypoxia, with increased active RhoA and LIMK phosphorylation. Their additional APM response to U46619 challenge is independent of RhoA, reflecting decreased TP association with G12/13 in favor of Gαq. In contrast, hypoxic contractile Ao myocytes polymerize actin modestly and depolymerize to U46619. Both basal APM and the APM response to U46619 are increased in PPHN PA. APM corresponds with increased force generation to U46619 challenge in PPHN PA but not renal arteries.

Tensile properties of vascular smooth muscle cells: bridging vascular and cellular biomechanics

Vascular walls change their dimensions and mechanical properties adaptively in response to blood pressure. Because these responses are driven by the smooth muscle cells (SMCs) in the media, a detailed understanding of the mechanical environment of the SMCs should reveal the mechanism of the adaptation. As the mechanical properties of the media are highly heterogeneous at the microscopic level, the mechanical properties of the cells should be measured directly. The tensile properties of SMCs are, thus, important to reveal the microscopic mechanical environment in vascular tissues; their tensile properties have a close correlation with the distribution and arrangement of elements of the cytoskeletal networks, such as stress fibers and microtubules. In this review, we first introduce the experimental techniques used for tensile testing and discuss the various factors affecting the tensile properties of vascular SMCs. Cytoskeletal networks are particularly important for the mechanical properties of a cell and its mechanism of mechanotransduction; thus, the mechanical properties of cytoskeletal filaments and their effects on whole-cell mechanical properties are discussed with special attention to the balance of intracellular forces among the intracellular components that determines the force applied to each element of the cytoskeletal filaments, which is the key to revealing the mechanotransduction events regulating mechanical adaptation. Lastly, we suggest future directions to connect tissue and cell mechanics and to elucidate the mechanism of mechanical adaptation, one of the key issues of cardiovascular solid biomechanics.

Stress fibers stabilize the position of intranuclear DNA through mechanical connection with the nucleus in vascular smooth muscle cells

Actin stress fibers (SFs) running across the top surface of the nucleus in vascular smooth muscle cells were dissected using laser nano-dissection technique to release its pretension, and the dynamic behavior of SFs, nucleus, and intranuclear DNA were investigated. SFs shortened across the top surface of the nuclei after their dissection. The nuclei moved in the direction of SF retraction, and showed marked local deformation, indicating that SFs firmly connected to the nuclear surface. Intranuclear DNA located near and around the dissected SFs disappeared and their distribution changed markedly. These findings suggest that SFs stabilize the position of intranuclear chromatin through mechanical connection with the nucleus. The tension of SFs may be transmitted mechanically to the nucleus inducing conformational changes of intranuclear chromatin.

Complexity of the tensegrity structure for dynamic energy and force distribution of cytoskeleton during cell spreading

Cytoskeleton plays important roles in intracellular force equilibrium and extracellular force transmission from/to attaching substrate through focal adhesions (FAs). Numerical simulations of intracellular force distribution to describe dynamic cell behaviors are still limited. The tensegrity structure comprises tension-supporting cables and compression-supporting struts that represent the actin filament and microtubule respectively, and has many features consistent with living cells. To simulate the dynamics of intracellular force distribution and total stored energy during cell spreading, the present study employed different complexities of the tensegrity structures by using octahedron tensegrity (OT) and cuboctahedron tensegrity (COT). The spreading was simulated by assigning specific connection nodes for radial displacement and attachment to substrate to form FAs. The traction force on each FA was estimated by summarizing the force carried in sounding cytoskeletal elements. The OT structure consisted of 24 cables and 6 struts and had limitations soon after the beginning of spreading by declining energy stored in struts indicating the abolishment of compression in microtubules. The COT structure, double the amount of cables and struts than the OT structure, provided sufficient spreading area and expressed similar features with documented cell behaviors. The traction force pointed inward on peripheral FAs in the spread out COT structure. The complex structure in COT provided further investigation of various FA number during different spreading stages. Before the middle phase of spreading (half of maximum spreading area), cell attachment with 8 FAs obtained minimized cytoskeletal energy. The maximum number of 12 FAs in the COT structure was required to achieve further spreading. The stored energy in actin filaments increased as cells spread out, while the energy stored in microtubules increased at initial spreading, peaked in middle phase, and then declined as cells reached maximum spreading. The dynamic flows of energy in struts imply that microtubules contribute to structure stabilization.

Heartbeat regulates cardiogenesis by suppressing retinoic acid signaling via expression of miR-143

Cardiogenesis proceeds with concomitant changes in hemodynamics to accommodate the circulatory demands of developing organs and tissues. In adults, circulatory adaptation is critical for the homeostatic regulation of blood circulation. In these hemodynamics-dependent processes of morphogenesis and adaptation, a mechanotransduction pathway, which converts mechanical stimuli into biological outputs, plays an essential role, although its molecular nature is largely unknown. Here, we report that expression of zebrafish miR-143 is dependent on heartbeat. Knocking-down miR-143 results in de-repression of retinoic acid signaling, and produces abnormalities in the outflow tracts and ventricles. Our data uncover a novel epigenetic link between heartbeat and cardiac development, with miR-143 as an essential component of the mechanotransduction cascade.

Macroscopic stiffening of embryonic tissues via microtubules, RhoGEF and the assembly of contractile bundles of actomyosin

During morphogenesis, forces generated by cells are coordinated and channeled by the viscoelastic properties of the embryo. Microtubules and F-actin are considered to be two of the most important structural elements within living cells accounting for both force production and mechanical stiffness. In this paper, we investigate the contribution of microtubules to the stiffness of converging and extending dorsal tissues in Xenopus laevis embryos using cell biological, biophysical and embryological techniques. Surprisingly, we discovered that depolymerizing microtubules stiffens embryonic tissues by three- to fourfold. We attribute tissue stiffening to Xlfc, a previously identified RhoGEF, which binds microtubules and regulates the actomyosin cytoskeleton. Combining drug treatments and Xlfc activation and knockdown lead us to the conclusion that mechanical properties of tissues such as viscoelasticity can be regulated through RhoGTPase pathways and rule out a direct contribution of microtubules to tissue stiffness in the frog embryo. We can rescue nocodazole-induced stiffening with drugs that reduce actomyosin contractility and can partially rescue morphogenetic defects that affect stiffened embryos. We support these conclusions with a multi-scale analysis of cytoskeletal dynamics, tissue-scale traction and measurements of tissue stiffness to separate the role of microtubules from RhoGEF activation. These findings suggest a re-evaluation of the effects of nocodazole and increased focus on the role of Rho family GTPases as regulators of the mechanical properties of cells and their mechanical interactions with surrounding tissues.

Venom kinematics during prey capture in Conus: the biomechanics of a rapid injection system

Cone snails use an extensile, tubular proboscis as a conduit to deliver a potent cocktail of bioactive venom peptides into their prey. Previous studies have focused mainly on understanding the venom's role in prey capture but successful prey capture requires both rapid physiological and biomechanical mechanisms. Conus catus, a fish-hunting species, uses a high-speed hydraulic mechanism to inject its hollow, spear-like radular tooth into prey. We take an integrated approach to investigating the biomechanics of this process by coupling kinematic studies with morphological analyses. Taking advantage of the opaque venom and translucent proboscis of a mollusc-hunting juvenile cone snail, Conus pennaceus, we have determined that a high-speed prey capture mechanism is not unique to cone species that hunt fish prey. Two morphological structures were found to play crucial roles in this process. A constriction of the lumen near the tip of the proboscis, composed of tall epithelial cells densely packed with microfilaments, impedes forward movement of the radular tooth prior to its propulsion. Proximal to the constriction, a muscular sphincter was found to regulate venom flow and pressurization in the proboscis. In C. pennaceus, the rapid appearance and flushing of venom within the proboscis during prey capture suggests a mechanism involving the delivery of a discrete quantity of venom. The interplay between these elements provides a unique and effective biomechanical injection system for the fast-acting cone snail venom peptides.