Effects of BDM, [Ca2+]o, and temperature on the dynamic stiffness of quiescent cardiac trabeculae from rat

Biomechanical characterization of the passive porcine stomach

The complex mechanics of the gastric wall facilitates the main digestive tasks of the stomach. However, the interplay between the mechanical properties of the stomach, its microstructure, and its vital functions is not yet fully understood. Importantly, the pig animal model is widely used in biomedical research for preliminary or ethically prohibited studies of the human digestion system. Therefore, this study aims to thoroughly characterize the mechanical behavior and microstructure of the porcine stomach. For this purpose, multiple quasi-static mechanical tests were carried out with three different loading modes, i.e., planar biaxial extension, radial compression, and simple shear. Stress-relaxation tests complemented the quasi-static experiments to evaluate the deformation and strain-dependent viscoelastic properties. Each experiment was conducted on specimens of the complete stomach wall and two separate layers, mucosa and muscularis, from each of the three gastric regions, i.e., fundus, body, and antrum. The significant preconditioning effects and the considerable regional and layer-specific differences in the tissue response were analyzed. Furthermore, the mechanical experiments were complemented with histology to examine the influence of the microstructural composition on the macrostructural mechanical response and vice versa. Importantly, the shear tests showed lower stresses in the complete wall compared to the single layers which the loose network of submucosal collagen might explain. Also, the stratum arrangement of the muscularis might explain mechanical anisotropy during tensile tests. This study shows that gastric tissue is characterized by a highly heterogeneous microstructure with regional variations in layer composition reflecting not only functional differences but also diverse mechanical behavior. STATEMENT OF SIGNIFICANCE: Unfortunately, only few experimental data on gastric tissue are available for an adequate material parameter and model estimation. The present study therefore combines layer- and region-specific stomach wall mechanics obtained under multiple loading conditions with histological insights into the heterogeneous microstructure. On the one hand, the extensive data sets of this study expand our understanding of the interplay between gastric mechanics, motility and functionality, which could help to identify and treat associated pathologies. On the other hand, such data sets are of high relevance for the constitutive modeling of stomach tissue, and its application in the field of medical engineering, e.g., in the development of surgical staplers and the improvement of bariatric surgical interventions.

Quantifying the microstructural and biomechanical changes in the porcine ventricles during growth and remodelling

Cardiac tissue growth and remodelling (G & R) occur in response to the changing physiological demands of the heart after birth. The early shift to pulmonary circulation produces an immediate increase in ventricular workload, causing microstructural and biomechanical changes that serve to maintain overall physiological homoeostasis. Such cardiac G & R continues throughout life. Quantifying the tissue's mechanical and microstructural changes because of G & R is of increasing interest, dovetailing with the emerging fields of personalised and precision solutions. This study aimed to determine equibiaxial, and non-equibiaxial extension, stress-relaxation, and the underlying microstructure of the passive porcine ventricles tissue at four time points spanning from neonatal to adulthood. The three-dimensional microstructure was investigated via two-photon excited fluorescence and second-harmonic generation microscopy on optically cleared tissues, describing the 3D orientation, rotation and dispersion of the cardiomyocytes and collagen fibrils. The results revealed that during biomechanical testing, myocardial ventricular tissue possessed non-linear, anisotropic, and viscoelastic behaviour. An increase in stiffness and viscoelasticity was noted for the left and right ventricular free walls from neonatal to adulthood. Microstructural analyses revealed concomitant increases in cardiomyocyte rotation and dispersion. This study provides baseline data, describing the biomechanical and microstructural changes in the left and right ventricular myocardial tissue during G & R, which should prove valuable to researchers in developing age-specific, constitutive models for more accurate computational simulations. STATEMENT OF SIGNIFICANCE: There is a dearth of experimental data describing the growth and remodelling of left and right ventricular tissue. The published literature is fragmented, with data reported via different experimental techniques using tissues harvested from a variety of animals, with different gender and ages. This prevents developing a continuum of data spanning birth to death, so limiting the potential that can be leveraged to aid computational modelling and simulations. In this study, equibiaxial, non-equibiaxial, and stress-relaxation data are presented, describing directional-dependent material responses. The biomechanical data is consolidated with equivalent microstructural data, an important element for the development of future material models. Combined, these data describe microstructural and biomechanical changes in the ventricles, spanning G &R from neonatal to adulthood.

Impaired calcium handling mechanisms in atrial trabeculae of diabetic patients

The aim of this study was to investigate cardiomyocyte Ca2+ handling and contractile function in freshly excised human atrial tissue from diabetic and non-diabetic patients undergoing routine surgery. Multicellular trabeculae (283 ± 20 μm in diameter) were dissected from the endocardial surface of freshly obtained right atrial appendage samples from consenting surgical patients. Trabeculae were mounted in a force transducer at optimal length, electrically stimulated to contract, and loaded with fura-2/AM for intracellular Ca2+ measurements. The response to stimulation frequencies encompassing the physiological range was recorded at 37°C. Myofilament Ca2+ sensitivity was assessed from phase plots and high potassium contractures of force against [Ca2+ ]i . Trabeculae from diabetic patients (n = 12) had increased diastolic (resting) [Ca2+ ]i (p = 0.03) and reduced Ca2+ transient amplitude (p = 0.04) when compared to non-diabetic patients (n = 11), with no difference in the Ca2+ transient time course. Diastolic stress was increased (p = 0.008) in trabeculae from diabetic patients, and peak developed stress decreased (p ≤ 0.001), which were not accounted for by reduction in the cardiomyocyte, or contractile protein, content of trabeculae. Trabeculae from diabetic patients also displayed diminished myofilament Ca2+ sensitivity (p = 0.018) compared to non-diabetic patients. Our data provides evidence of impaired calcium handling during excitation-contraction coupling with resulting contractile dysfunction in atrial tissue from patients with type 2 diabetes in comparison to the non-diabetic. This highlights the importance of targeting cardiomyocyte Ca2+ homeostasis in developing more effective treatment options for diabetic heart disease in the future.

The Interventricular Septum Is Biomechanically Distinct from the Ventricular Free Walls

The interventricular septum contributes to the pumping function of both ventricles. However, unlike the ventricular wall, its mechanical behavior remains largely unknown. To fill the knowledge gap, this study aims to characterize the biaxial and transmural variation of the mechanical properties of the septum and compare it to the free walls of the left and right ventricles (LV/RV). Fresh hearts were obtained from healthy, adult sheep. The septal wall was sliced along the mid-line into two septal sides and compared to the epicardial layers of the LV- and RV-free walls. Biaxial tensile mechanical tests and constitutive modeling were performed to obtain the passive mechanical properties of the LV- and RV-side of the septum and ventricular walls. We found that both sides of the septum were significantly softer than the respective ventricular walls, and that the septum presented significantly less collagen than the ventricular walls. At low strains, we observed the symmetric distribution of the fiber orientations and a similar anisotropic behavior between the LV-side and RV-side of the septum, with a stiffer material property in the longitudinal direction, rather than the circumferential direction. At high strains, both sides showed isotropic behavior. Both septal sides had similar intrinsic elasticity, as evidenced by experimental data and constitutive modeling. These new findings offer important knowledge of the biomechanics of the septum wall, which may deepen the understanding of heart physiology.

Comparison of Biomechanical Properties and Microstructure of Trabeculae Carneae, Papillary Muscles, and Myocardium in the Human Heart

Trabeculae carneae account for a significant portion of human ventricular mass, despite being considered embryologic remnants. Recent studies have found trabeculae hypertrophy and fibrosis in hypertrophied left ventricles with various pathological conditions. The objective of this study was to investigate the passive mechanical properties and microstructural characteristics of trabeculae carneae and papillary muscles compared to the myocardium in human hearts. Uniaxial tensile tests were performed on samples of trabeculae carneae and myocardium strips, while biaxial tensile tests were performed on samples of papillary muscles and myocardium sheets. The experimental data were fitted with a Fung-type strain energy function and material coefficients were determined. The secant moduli at given diastolic stress and strain levels were determined and compared among the tissues. Following the mechanical testing, histology examinations were performed to investigate the microstructural characteristics of the tissues. Our results demonstrated that the trabeculae carneae were significantly stiffer (Secant modulus SM2 = 80.06 ± 10.04 KPa) and had higher collagen content (16.10 ± 3.80%) than the myocardium (SM2 = 55.14 ± 20.49 KPa, collagen content = 10.06 ± 4.15%) in the left ventricle. The results of this study improve our understanding of the contribution of trabeculae carneae to left ventricular compliance and will be useful for building accurate computational models of the human heart.

Biomechanical properties and microstructure of human ventricular myocardium

In the multidisciplinary field of heart research it is of utmost importance to identify accurate myocardium material properties for the description of phenomena such as mechano-electric feedback or heart wall thickening. A rationally-based material model is required to understand the highly nonlinear mechanics of complex structures such as the passive myocardium under different loading conditions. Unfortunately, to date there are no experimental data of human heart tissues available to estimate material parameters and to develop adequate material models. This study aimed to determine biaxial extension and triaxial shear properties and the underlying microstructure of the passive human ventricular myocardium. Using new state-of-the-art equipment, planar biaxial extension tests were performed to determine the biaxial extension properties of the passive ventricular human myocardium. Shear properties of the myocardium were examined by triaxial simple shear tests performed on small cubic specimens excised from an adjacent region of the biaxial extension specimens. The three-dimensional microstructure was investigated through second-harmonic generation (SHG) microscopy on optically cleared tissues, which emphasized the 3D orientation and dispersion of the myofibers and adjacent collagen fabrics. The results suggest that the passive human LV myocardium under quasi-static and dynamic multiaxial loadings is a nonlinear, anisotropic (orthotropic), viscoelastic and history-dependent soft biological material undergoing large deformations. Material properties of the tissue components along local microstructural axes drive the nonlinear and orthotropic features of the myocardium. SHG microscopy investigation revealed detailed information about the myocardial microstructure due to its high resolution. It enabled the identification of structural parameters such as the fiber and the sheet orientations and corresponding dispersions. With this complete set of material data, a sophisticated material model and associated material parameters can be defined for a better description of the biomechanical response of the ventricular myocardium in humans. Such a model will lead to more accurate computational simulations to better understand the fundamental underlying ventricular mechanics, a step needed in the improvement of medical treatment of heart diseases.

STATEMENT OF SIGNIFICANCE

Unfortunately, to date there are no experimental data of human heart tissues available for material parameter estimation and the development of adequate material models. In this manuscript novel biaxial tensile and shear test data at different specimen orientations are presented, which allowed to adequately capture the direction-dependent material response. With these complete sets of mechanical data, combined with their underlying microstructural data (also presented herein), sophisticated material models and associated material parameters can be defined for the description of the mechanical behavior of the ventricular myocardium in humans. Such models will lead to accurate computational simulations to better understand the fundamental underlying ventricular mechanics, a step needed in the improvement of medical treatment of heart diseases.

Radius-dependent decline of performance in isolated cardiac muscle does not reflect inadequacy of diffusive oxygen supply

The study of cardiac energetics commonly involves the use of isolated muscle preparations (papillary muscles or trabeculae carneae). Their contractile performance has been observed to vary inversely with thickness. This inverse dependence has been attributed, almost without exception, to inadequate diffusion of oxygen into the centers of muscles of large diameter. It is thus commonly hypothesized that the radius-dependent diminution of performance reflects the development of an anoxic core. We tested this hypothesis theoretically by solving a modification of the diffusion equation, in which the rate of oxygen consumption is a sigmoidal function of the partial pressure of oxygen. The model demonstrates that sufficiently thick muscles, operating at sufficiently high rates of oxygen demand or sufficiently low ambient partial pressures of oxygen, will indeed show diminished energetic performance, whether indirectly indexed as stress (force per cross-sectional area) development or as the rate of heat production. However, such simulated behavior requires the adoption of extreme parameter values, often differing by an order of magnitude from their experimental equivalents. We thus conclude that the radius-dependent diminution of muscle performance in vitro cannot be attributed entirely to an insufficient supply of oxygen via diffusion.

Energetics of stress production in isolated cardiac trabeculae from the rat

The heat liberated upon stress production in isolated cardiac muscle provides insights into the complex thermodynamic processes underlying mechanical contraction. To that end, we simultaneously measured the heat and stress (force per cross-sectional area) production of cardiac trabeculae from rats using a flow-through micromechanocalorimeter. In a flowing stream of O(2)-equilibrated Tyrode solution (∼22°C), the stress and heat production of actively contracting trabeculae were varied by 1) altering stimulus frequency (0.2-4 Hz) at optimal muscle length (L(o)), 2) reducing muscle length below L(o) at 0.2 and 2 Hz, and 3) changing extracellular Ca(2+) concentrations ([Ca(2+)](o); 1 and 2 mM). Linear regression lines were adequate to fit the active heat-stress data. The active heat-stress relationships were independent of stimulus frequency and muscle length but were dependent on [Ca(2+)](o), having greater intercepts at 2 mM [Ca(2+)](o) than at 1 mM [Ca(2+)](o) (3.5 and 2.0 kJ·m(-3)·twitch(-1), respectively). The slopes among the heat-stress relationships did not differ. At the highest experimental stimulus frequency, pronounced elevation of diastolic Ca(2+) resulted in incomplete twitch relaxation. The resulting increase of diastolic stress, which occurred with negligible metabolic energy expenditure, subsequently diminished due to the time-dependent loss of myofilament Ca(2+)-sensitivity.

A unique micromechanocalorimeter for simultaneous measurement of heat rate and force production of cardiac trabeculae carneae

To study cardiac muscle energetics quantitatively, it is of paramount importance to measure, simultaneously, mechanical and thermal performance. Ideally, this should be achieved under conditions that minimize the risk of tissue anoxia, especially under high rates of energy expenditure. In vitro, this consideration necessitates the use of preparations of small radial dimensions. To that end, we have constructed a unique micromechanocalorimeter, consisting of an open-ended flow-through microcalorimeter, a force transducer, and a pair of muscle-length actuators. The device enables the metabolic and mechanical performance of cardiac trabeculae carneae to be investigated for prolonged periods in a continuously replenished oxygen- and nutrient-rich environment.

A modular instrument for exploring the mechanics of cardiac myocytes

The cardiac ventricular myocyte is a key experimental system for exploring the mechanical properties of the diseased and healthy heart. Millions of primary myocytes, which remain viable for 4–6 h, can be readily isolated from animal models. However, currently available instrumentation allows the mechanical properties of only a few physically loaded myocytes to be explored within 4–6 h. Here we describe a modular and inexpensive prototype instrument that could form the basis of an array of devices for probing the mechanical properties of single mammalian myocytes in parallel. This device would greatly increase the throughput of scientific experimentation and could be applied as a high-content screening instrument in the pharmaceutical industry. The instrument module consists of two independently controlled Lorentz force actuators-force transducers in the form of 0.025 × 1 × 5 mm stainless steel cantilevers with 0.5 m/N compliance and 360-Hz resonant frequency. Optical position sensors focused on each cantilever provide position and force resolution of <1 nm/√Hz and <2 nN/√Hz, respectively. The motor structure can produce peak displacements and forces of ±200 μm and ±400 μN, respectively. Custom Visual Basic.Net software provides data acquisition, signal processing, and digital control of cantilever position. The functionality of the instrument was demonstrated by implementation of novel methodologies for loading and attaching healthy mammalian ventricular myocytes to the force sensor and actuator and use of stochastic system identification techniques to measure their passive dynamic stiffness at various sarcomere lengths.