Exploring the potential and challenges of developing physiologically-based toxicokinetic models to support human health risk assessment of microplastic and nanoplastic particles

Microplastics (MPs) and nanoplastics (NPs) pollution has emerged as a significant and widespread environmental issue. Humans are inevitably exposed to MPs and NPs via ingestion, inhalation, and dermal contacts from various sources. However, mechanistic knowledge of their distribution, interaction, and potency in the body is still lacking. To address this knowledge gap, we have undertaken the task of elucidating the toxicokinetic (TK) behaviors of MPs and NPs, aiming to provide mechanistic information for constructing a conceptual physiologically based toxicokinetic (PBTK) model to support in silico modeling approaches. Our effort involved a thorough examination of the existing literature and data collation on the presence of MPs in the human body and in vitro/ex vivo/in vivo biodistribution across various cells and tissues. By comprehending the absorption, distribution, metabolism, and excretion mechanisms of MPs and NPs in relation to their physicochemical attributes, we established a foundational understanding of the link between external exposure and internal tissue dosimetry. We observed that particle size and surface chemistry have been thoroughly explored in previous experimental studies. However, certain attributes, such as polymer type, shape, and biofilm/biocorona, warrant attention and further examination. We discussed the fundamental disparities in TK properties of MPs/NPs from those of engineered nanoparticles. We proposed a preliminary PBTK framework with several possible modeling approaches and discussed existing challenges for further investigation. Overall, this article provides a comprehensive compilation of existing TK data of MPs/NPs, a critical overview of TK processes and mechanisms, and proposes potential PBTK modeling approaches, particularly regarding their applicability to the human system, and outlines future perspectives for developing PBTK models and their integration into human health risk assessment of MPs and NPs.

Penetration of topically applied polymeric nanoparticles across the epidermis of thick skin from rat

The barrier function of the epidermis poses a significant challenge to nanoparticle-mediated topical delivery. A key factor in this barrier function is the thickness of the stratum corneum (SC) layer within the epidermis, which varies across different anatomical sites. The epidermis from the palms and soles, for instance, have thicker SC compared to those from other areas. Previous studies have attempted to bypass the SC layer for nanoparticle penetration by using physical disruption; however, these studies have mostly focused on non-thick skin. In this study, we investigate the role of SC-disrupting mechano-physical strategies (tape-stripping and microneedle abrasion) on thick and thin skin, in allowing transdermal penetration of topically applied nanoparticles using an ex-vivo skin model from rat. Our findings show that tape-stripping reduced the overall thickness of SC in thick skin by 87%, from 67.4 ± 17.3μm to 8.2 ± 8.5μm, whereas it reduced thin skin SC by only 38%, from 9.9 ± 0.6μm to 6.2 ± 3.2μm. Compared to non-thick skin, SC disruption in thick skin resulted in higher nanoparticle diffusion. Tape-stripping effectively reduces SC thickness of thick skin and can be potentially utilized for enhanced penetration of topically applied nanoparticles in skin conditions that affect thick skin.

Hazards Associated With Nanotechnology in Clinical Dentistry

Nanotechnology has transformed the field of dentistry with immense potential to provide comprehensive oral health care using nanomaterials, advanced clinical tools, and devices. New materials with superior properties can be developed using nanotechnology by making use of their atomic or molecular properties. Although there are numerous ways in which nanomaterials impact our health, the primary cause is that they comprise chemicals that may have an inadvertent reaction in the body. Moreover, they are used on a daily basis, increasing human contact with them. It is observed to be smaller in size than the physiological barrier in our bodies, making it much simpler for them to pass through and enter the body and they are being used more frequently. It is observed to be smaller in size than the physiological barrier in our bodies, making it much simpler for them to pass through and enter the body and being used more frequently. Although there are numerous ways in which nanomaterials impact our health, the primary cause is they comprise chemicals that may have an inadvertent reaction in the body. The review discusses various types of toxicity, including the cytotoxicity of composites, carbon nanoparticles, silver nanoparticles (SNPs), and quantum dots. It also covers genotoxicity, the effect of nanoparticles on salivary secretion, oral and gastrointestinal mucosa passage of nanoparticles, the tooth surface microenvironment, and interactions with engineered nanomaterials (ENMs). It is concluded that there is scarce information regarding the presence of chemicals that are released from nanoparticles used in dental materials. Nanotechnology is at an infant stage, although it has progressed by leaps and bounds, hailing a new age that provides better treatment modalities in various branches of dentistry. Although the development and application of nanodentistry are of considerable interest, knowledge regarding the possible toxicity of such materials must be meticulously evaluated, and potential benefits must be weighed against the risks to identify potential gaps in the safety assessment. Further research is needed on workplace exposure to nanoparticles in dentistry.

Pharmacokinetics and tumor delivery of nanoparticles

Nanoparticles (NPs) have been widely used in different areas, including consumer products and medicine. In terms of biomedical applications, NPs or NP-based drug formulations have been extensively investigated for cancer diagnostics and therapy in preclinical studies, but the clinical translation rate is low. Therefore, a thorough and comprehensive understanding of the pharmacokinetics of NPs, especially in drug delivery efficiency to the target therapeutic tissue tumor, is important to design more effective nanomedicines and for proper assessment of the safety and risk of NPs. This review article focuses on the pharmacokinetics of both organic and inorganic NPs and their tumor delivery efficiencies, as well as the associated mechanisms involved. We discuss the absorption, distribution, metabolism, and excretion (ADME) processes following different routes of exposure and the mechanisms involved. Many physicochemical properties and experimental factors, including particle type, size, surface charge, zeta potential, surface coating, protein binding, dose, exposure route, species, cancer type, and tumor size can affect NP pharmacokinetics and tumor delivery efficiency. NPs can be absorbed with varying degrees following different exposure routes and mainly accumulate in liver and spleen, but also distribute to other tissues such as heart, lung, kidney and tumor tissues; and subsequently get metabolized and/or excreted mainly through hepatobiliary and renal elimination. Passive and active targeting strategies are the two major mechanisms of tumor delivery, while active targeting tends to have less toxicity and higher delivery efficiency through direct interaction between ligands and receptors. We also discuss challenges and perspectives remaining in the field of pharmacokinetics and tumor delivery efficiency of NPs.

Nanoparticles for Topical Application in the Treatment of Skin Dysfunctions-An Overview of Dermo-Cosmetic and Dermatological Products

Nanomaterials (NM) arouse interest in various fields of science and industry due to their composition-tunable properties and the ease of modification. They appear currently as components of many consumer products such as sunscreen, dressings, sports clothes, surface-cleaning agents, computer devices, paints, as well as pharmaceutical and cosmetics formulations. The use of NPs in products for topical applications improves the permeation/penetration of the bioactive compounds into deeper layers of the skin, providing a depot effect with sustained drug release and specific cellular and subcellular targeting. Nanocarriers provide advances in dermatology and systemic treatments. Examples are a non-invasive method of vaccination, advanced diagnostic techniques, and transdermal drug delivery. The mechanism of action of NPs, efficiency of skin penetration, and potential threat to human health are still open and not fully explained. This review gives a brief outline of the latest nanotechnology achievements in products used in topical applications to prevent and treat skin diseases. We highlighted aspects such as the penetration of NPs through the skin (influence of physical-chemical properties of NPs, the experimental models for skin penetration, methods applied to improve the penetration of NPs through the skin, and methods applied to investigate the skin penetration by NPs). The review summarizes various therapies using NPs to diagnose and treat skin diseases (melanoma, acne, alopecia, vitiligo, psoriasis) and anti-aging and UV-protectant nano-cosmetics.

Safety-by-design using forward and inverse multi-target machine learning

The economic and social future of nanotechnology depends on our ability and manufacture nanomaterials that avoid potential toxicity, by identifying them before they are made, used and released into the environment. Safety-by-design is a framework for including these issues at an early stage of the development process, but balancing multiple nanoparticle properties and selection criteria remains challenging. Based on a synthetic data set of over 19,000 possible sunscreen product specifications, we have used multi-target machine learning to predict the corresponding size, shape, concentration and polytype of titania nanoparticle additives. The study considers the optical properties responsible for the sun protection factor and product transparency, including the extinction coefficients for ultra violet and visible light, and the potential for toxicity due to the generation of reactive oxygen species from the photocatalytically active facets of both anatase and rutile nanoparticles, as a function of the size and shape. We predict a number of conventional forward structure/property and property/product relationships, but show that a direct structure/product relationship provides superior performance when predicting multiple properties or product specifications simultaneously. These models are then inverted, re-optimized and re-trained to provide focused, high performing inverse design models that do not require additional optimization, and are capable of identifying nanoparticle configurations outside of the training set. The ability to directly predict suitable nanoparticle structures that conform to prerequisite sun protection, transparently and potential toxicity thresholds represents a new approach to safety-by-design that can be applied to other products and materials where multiple design criteria must be met at the same time.

A review to support the derivation of a worst-case dermal penetration value for nanoparticles

Data on dermal penetration of nanoparticles (NPs) was reviewed with the goal to establish a worst-case dermal penetration value for NPs. To this aim, the main focus was on studies providing quantitative dermal penetration data (29 studies). In vivo dermal penetration studies and ex vivo studies based on skin explants were included. These studies used NPs with different compositions, dimensions, and shapes. The overall results showed that skin is an efficient barrier for NPs, indistinctly of their properties. However, some studies reported that a small percentage of the applied NP dose penetrated the skin surface and reached deeper skin layers. The integrity of the skin layer and the product formulation were more critical determinants of dermal penetration than the NP properties. Most quantitative studies were based on elemental analysis such that it cannot be concluded if detected levels are attributable to a dissolved fraction or to the penetration of particles as such. Results of qualitative imaging studies suggest that at least a fraction of the levels reported in quantitative studies could be due to particle penetration. Altogether, based on the data compiled, we propose that 1% could be used as a worst-case dermal penetration value for nanoparticles within the boundaries of the properties of those included in our analysis.

Metal nanomaterials: Immune effects and implications of physicochemical properties on sensitization, elicitation, and exacerbation of allergic disease

The recent surge in incorporation of metallic and metal oxide nanomaterials into consumer products and their corresponding use in occupational settings have raised concerns over the potential for metals to induce size-specific adverse toxicological effects. Although nano-metals have been shown to induce greater lung injury and inflammation than their larger metal counterparts, their size-related effects on the immune system and allergic disease remain largely unknown. This knowledge gap is particularly concerning since metals are historically recognized as common inducers of allergic contact dermatitis, occupational asthma, and allergic adjuvancy. The investigation into the potential for adverse immune effects following exposure to metal nanomaterials is becoming an area of scientific interest since these characteristically lightweight materials are easily aerosolized and inhaled, and their small size may allow for penetration of the skin, which may promote unique size-specific immune effects with implications for allergic disease. Additionally, alterations in physicochemical properties of metals in the nano-scale greatly influence their interactions with components of biological systems, potentially leading to implications for inducing or exacerbating allergic disease. Although some research has been directed toward addressing these concerns, many aspects of metal nanomaterial-induced immune effects remain unclear. Overall, more scientific knowledge exists in regards to the potential for metal nanomaterials to exacerbate allergic disease than to their potential to induce allergic disease. Furthermore, effects of metal nanomaterial exposure on respiratory allergy have been more thoroughly-characterized than their potential influence on dermal allergy. Current knowledge regarding metal nanomaterials and their potential to induce/exacerbate dermal and respiratory allergy are summarized in this review. In addition, an examination of several remaining knowledge gaps and considerations for future studies is provided.

The effect of the inhalation of and topical exposure to zinc oxide nanoparticles on airway inflammation in mice

Zinc oxide nanoparticles (ZnONPs) are widely used in the manufacturing of many commercial products. Workers exposed to ZnO particles may develop metal fume fever. Our previous study suggested that the oropharyngeal aspiration of ZnONPs could cause eosinophilic airway inflammation and increase T helper 2 (Th2) cytokine expression in the absence of allergens in mice. ZnO has been used topically as a sunscreen and a therapeutic agent for dermatological conditions. To understand whether inhalation and topically applied ZnONPs might cause or exert an adjuvant effect on the development of allergic airway inflammation in mice, C57BL/6 J mice were exposed to filtered air or 2.5 mg/m³ ZnONPs via whole-body inhalation for 5 h a day over 5 days, and BALB/c mice were topically exposed to ZnONPs using modified mouse models of atopic dermatitis (AD) and asthma. Ovalbumin (OVA) solution was used as an allergen in the topical exposure experiments. A significantly increased eosinophil count and mixed Th1/Th2 cytokine expression were detected in the bronchoalveolar lavage fluid (BALF) after ZnONP inhalation. However, only mild eosinophilia and low Th2 cytokine expression were detected in the BALF after oropharyngeal OVA aspiration in the high-dose ZnONP topical treatment group. These results suggest that ZnONP inhalation might play a role in the development of allergic airway inflammation in mice. However, topically applied ZnONPs only play a limited role in the development of allergic airway inflammation in mice.

Biosynthesis of size-controlled gold nanoparticles using M. lucida leaf extract and their penetration studies on human skin for plastic surgery applications

Recently, majority of the studies were focusing on the nanoparticles (NPs) and their abilities of penetrating Stratum Corneum (SC), as they can be prominently utilized in the plastic surgeries. In the current work, we demonstrated the penetrating abilities of gold NPs (AuNPs) through anthropological skin with diameters of 10 and 15 nm, varying in sizes, with the help of Multiphoton Microscopy. In addition, we also demonstrated a rapid facile environment friendly process of synthesizing AuNPs of adjustable sizes with the help of aqueous M. lucida leaf extract. Surface plasmon resonance was performed to confirm the synthesis of AuNPs at 530 nm with the help of UV-vis spectrophotometer. By differentiating the quantities of M. lucida leaf aqueous extracts, we studied the reduction time, morphological differences and size of the AuNPs. By performing Fourier Transformation Infrared Spectroscopy (FTIR), UV-vis spectroscopy, Transmission Electron Microscopy (TEM), Powder X-ray Diffraction (XRD), Energy Dispersive X-ray Spectroscopy (EDAX) and Selected Area Electron Diffraction (SAED), we characterized the fabricated AuNPs. The further aggregation and growth of AuNPs was protected by the polyphenols in the oxidised form by having a coordination with the surface of AuNPs. Moreover, the experiments of skin penetration showed an effort to deeply examine the factors leading to the penetration of particles into the human skin. These responses indicate that NPs at the determined size ranges penetrate the SC in the same pattern of the drug molecules, mostly by the intercellular paths. These responses attained were essential for developing a unique transdermal transporter as well as for understanding the basic interaction of skin-NPs for the application of plastic surgeries.

ZnO nanoparticles-associated mitochondrial stress-induced apoptosis and G2/M arrest in HaCaT cells: a mechanistic approach

Zinc oxide nanoparticles (ZnO NPs) with their wide range of consumer applications in day-to-day life received great attention to evaluate their effects in humans. This study has been attempted to elucidate the DNA damage response mechanism in a dermal model exposed to ZnO NPs through Ataxia Telangiectasia Mutated (ATM)-mediated ChK1-dependent G2/M arrest. Further, viability parameters and mechanism involved in the cell death with special reference to the consequences arising due to DNA damage were explored. Our study showed that ZnO NPs at concentrations 5 and 10 µg/ml induced significant cytotoxic effect in skin cell line. Moreover, the results confirmed generation of reactive oxygen species (ROS) induces the cell death by genotoxic insult, leading to mitochondrial membrane depolarisation and cell cycle arrest. Subsequently, ZnO NPs treatment created DNA damage as confirmed via Comet assay (increase in olive tail moment), micronucleus assay (increase in micronucleus formation), double-strand breaks (increase in ATM and Ataxia Telangiectasia and Rad3 related (ATR) expression), DNA fragmentation and cell cycle (G2/M arrest) studies. Finally, marker proteins analysis concluded the mechanistic approach by demonstrating the key marker expressions HMOX1 and HSP60 (for oxidative stress), cytochrome c, APAF1, BAX, Caspase 9, Caspase 3 and decrease in BCL2 (for activating apoptotic pathway), pATM, ATR and γH2AX (for double-strand breaks), DNA-PK (involved in DNA repair) and decrease in cell cycle regulators. In together, our data revealed the mechanism of ROS generation that triggers apoptosis and DNA damage in HaCaT cell lines exposed to ZnO NPs.

Nanopharmaceuticals for wound healing - Lost in translation?

Today, many of the newly developed pharmaceuticals and medical devices take advantage of nanotechnology and with a rising incidence of chronic diseases such as diabetes and cardiovascular disease, the number of patients afflicted globally with non-healing wounds is growing. This has created a requirement for improved therapies and wound care. However, converting the strategies applied in early research into new products is still challenging. Many of them fail to comply with the market requirements. This review discusses the legal and scientific challenges in the design of nanomedicines for wound healing. Are they lost in translation or is there a new generation of therapeutics in the pipeline?

The interaction between human blood neutrophil granulocytes and quantum dots

For biomedical applications, it is important to know, which kinds of blood cells can capture quantum dots (QDs). The maximum accumulation of QDs was found for the monocyte fraction of leukocytes, the minimum binding of QDs was observed for lymphocytes. It was found that CdSe/ZnS-MPA QDs are actively absorbed by the cells and have more expressed toxicity. The classical mechanism of the phagocytosis of QDs was revealed for neutrophils, when the QDs are located in phagolysosomes. The capture of QDs by neutrophil granulocytes has resulted in a destruction of certain types of QDs. The interaction of the neutrophils with the QDs has resulted in the death of the cells by one of the following cell death mechanisms: necrosis, apoptosis, autophagy, NETos, or mummification. The aggregation of the QDs manifested as an increase of the hydrodynamic diameter of the QDs was found to occur under the influence of serum and under the influence of blood cells (lymphocytes and neutrophils) in a serum-free medium.

Confocal laser scanning microscopy to estimate nanoparticles' human skin penetration in vitro

Objective

With rapid development of nanotechnology, there is increasing interest in nanoparticle (NP) application and its safety and efficacy on human skin. In this study, we utilized confocal laser scanning microscopy to estimate NP skin penetration.

Methods

Three different-sized polystyrene NPs marked with red fluorescence were applied to human skin, and Calcium Green 5N was used as a counterstain. Dimethyl sulfoxide (DMSO) and ethanol were used as alternative vehicles for NPs. Tape stripping was utilized as a barrier-damaged skin model. Skin biopsies dosed with NPs were incubated at 4°C or 37°C for 24 hours and imaged using confocal laser scanning microscopy.

Results

NPs were localized in the stratum corneum (SC) and hair follicles without penetrating the epidermis/dermis. Barrier alteration with tape stripping and change in incubation temperature did not induce deeper penetration. DMSO enhanced NP SC penetration but ethanol did not.

Conclusion

Except with DMSO vehicle, these hydrolyzed polystyrene NPs did not penetrate intact or barrier-damaged human “viable” epidermis. For further clinical relevance, in vivo human skin studies and more sensitive analytic chemical methodology are suggested.

A study on the in vitro percutaneous absorption of silver nanoparticles in combination with aluminum chloride, methyl paraben or di-n-butyl phthalate

Some reports indicate that the silver released from dermally applied products containing silver nanoparticles (AgNP) (e.g. wound dressings or cosmetics) can penetrate the skin, particularly if damaged. AgNP were also shown to have cytotoxic and genotoxic activity. In the present study percutaneous absorption of AgNP of two different nominal sizes (Ag15nm or Ag45nm by STEM) and surface modification, i.e. citrate or PEG stabilized nanoparticles, in combination with cosmetic ingredients, i.e. aluminum chloride (AlCl₃), methyl paraben (MPB), or di-n-butyl phthalate (DBPH) was assessed using in vitro model based on dermatomed pig skin. The inductively coupled plasma mass spectrometry (ICP-MS) measurements after 24h in receptor fluid indicated low, but detectable silver absorption and no statistically significant differences in the penetration between the 4 types of AgNP studied at 47, 470 or 750μg/ml. Similarly, no significant differences were observed for silver penetration when the AgNP were used in combinations with AlCl₃ (500μM), MPB (1250μM) or DBPH (35μM). The measured highest amount of Ag that penetrated was 0.45ng/cm² (0.365-0.974ng/cm²) for PEG stabilized Ag15nm+MPB.

Formulation and ex vivo evaluation of polymeric nanoparticles for controlled delivery of corticosteroids to the skin and the corneal epithelium

Controlled delivery of corticosteroids using nanoparticles to the skin and corneal epithelium may reduce their side effects and maximize treatment effectiveness. Dexamethasone-loaded ethyl cellulose, Eudragit® RS and ethyl cellulose/Eudragit® RS nanoparticles were prepared by the solvent evaporation method. Dexamethasone release from the polymeric nanoparticles was investigated in vitro using Franz diffusion cells. Drug penetration was also assessed ex vivo using excised human skin. Nanoparticle toxicity was determined by MTT and H2DCFDA assays. Eudragit® RS nanoparticles were smaller and positively charged but had a lower dexamethasone loading capacity (0.3-0.7%) than ethyl cellulose nanoparticles (1.4-2.2%). By blending the two polymers (1:1), small (105nm), positively charged (+37mV) nanoparticles with sufficient dexamethasone loading (1.3%) were obtained. Dexamethasone release and penetration significantly decreased with decreasing drug to polymer ratio and increased when Eudragit® RS was blended with ethyl cellulose. Ex vivo, drug release and penetration from the nanoparticles was slower than a conventional cream. The nanoparticles bear no toxicity potentials except ethyl cellulose nanoparticles had ROS generation potential at high concentration. In conclusion, the nanoparticles showed great potential to control the release and penetration of corticosteroids on the skin and mucus membrane and maximize treatment effectiveness.

Topical and cutaneous delivery using nanosystems

The goal of topical and cutaneous delivery is to deliver therapeutic and other substances to a desired target site in the skin at appropriate doses to achieve a safe and efficacious outcome. Normally, however, when the stratum corneum is intact and the skin barrier is uncompromised, this is limited to molecules that are relatively lipophilic, small and uncharged, thereby excluding many potentially useful therapeutic peptides, proteins, vaccines, gene fragments or drug-carrying particles. In this review we will describe how nanosystems are being increasingly exploited for topical and cutaneous delivery, particularly for these previously difficult substances. This is also being driven by the development of novel technologies, which include minimally invasive delivery systems and more precise fabrication techniques. While there is a vast array of nanosystems under development and many undergoing advanced clinical trials, relatively few have achieved full translation to clinical practice. This slow uptake may be due, in part, to the need for a rigorous demonstration of safety in these new nanotechnologies. Some of the safety aspects associated with nanosystems will be considered in this review.

Formulation and comparative in vitro evaluation of various dexamethasone-loaded pH-sensitive polymeric nanoparticles intended for dermal applications

pH-sensitive nanoparticles have a great potential for dermal and transfollicular drug delivery. In this study, pH-sensitive, dexamethasone-loaded Eudragit^® L 100, Eudragit^® L 100-55, Eudragit^® S 100, HPMCP-50, HPMCP-55 and cellulose acetate phthalate nanoparticles were prepared by nanoprecipitation and characterized. The pH-dependent swelling, erosion, dissolution and drug release kinetics were investigated in vitro using dynamic light scattering and Franz diffusion cells, respectively. Their toxicity potential was assessed by the ROS and MTT assays. 100-700nm nanoparticles with high drug loading and entrapment efficiency were obtained. The nanoparticles bear no toxicity potential. Cellulose phthalates nanoparticles were more sensitive to pH than acrylates nanoparticles. They dissolved in 10mM pH 7.5 buffer and released>80% of the drug within 7h. The acrylate nanoparticles dissolved in 40mM pH 7.5 buffer and released 65-70% of the drug within 7h. The nanoparticles remained intact in 10 and 40mM pH 6.0 buffers (HPMCP nanoparticles dissolved in 40mM pH 6.0 buffer) and released slowly. The nanoparticles properties could be modulated by blending the different polymers. In conclusion, various pH-sensitive nanoparticles that could release differently on the skin surface and dissolve and release in the hair follicles were obtained.

Comparison of different in vitro release methods used to investigate nanocarriers intended for dermal application

In vitro drug release measurement is one of the most important methods used to assess the quality of a nanocarrier and estimate it́s in vivo performance. Different in vitro drug release methods have been used to investigate the drug release from nanocarriers, however, little information is available with regard to a comparison of these methods (e.g. discriminative power, reproducibility). Thus, drug release from four nanocarriers (nanocrystals, lipid nanoparticles, Eudragit^® RS and ethyl cellulose nanoparticles) was investigated under sink and non-sink conditions with three drug release methods: an in situ method using Sirius^® inForm and two in vitro methods using dialysis bags and Franz diffusion cells. Dexamethasone was used as the model drug. The in situ measurement was a simple and fast method but not adequately discriminating because of a too rapid drug dissolution/release. Franz diffusion cells and dialysis bags were in most cases discriminative for the different nanocarriers with the drug dissolution/release being in the order of nanocrystals>Eudragit^® RS nanoparticles>lipid nanoparticles>ethyl cellulose nanoparticles. Drug release experiments with Franz diffusion cells had the highest reproducibility. The Franz diffusion cells could also be easily used with semisolid dosage forms.

Formulation and in vitro evaluation of polymeric enteric nanoparticles as dermal carriers with pH-dependent targeting potential

pH-sensitive nanoparticles which release in a controlled fashion on the skin or dissolve in the hair follicle could significantly improve treatment effectiveness and make transfollicular drug delivery a success. Dexamethasone-loaded Eudragit® L 100 nanoparticles were prepared by nanoprecipitation from an organic drug-polymer solution. Their toxicity potential was assessed using isolated human fibroblasts. pH-dependent swelling and erosion kinetics of the nanoparticles were investigated by dynamic light scattering and viscosity measurements and its effect on drug release was assessed in vitro with Franz diffusion cells. Stable, 100-550nm-sized dexamethasone-loaded Eudragit® L 100 nanoparticles with drug loading capacity and entrapment efficiency as high as 8.3% and 85%, respectively, were obtained by using polyvinyl alcohol as a stabilizer and ethanol as organic solvent. The nanoparticles showed little or no toxicity on isolated normal human fibroblasts. Dexamethasone existed in the nanoparticles as solid solution or in amorphous form. The nanoparticles underwent extensive swelling and slow drug release in media with a low buffer capacity (as low as 10mM) and a higher pH or at a pH close to the dissolution pH of the polymer (pH6) and a higher buffer capacity. In 40mM buffer and above pH6.8, the nanoparticles eroded fast or dissolved completely and thus released the drug rapidly. pH-sensitive nanoparticles which potentially release in a controlled manner on the stratum corneum but dissolve in the hair follicle could be prepared.

Effect of flexing and massage on in vivo human skin penetration and toxicity of zinc oxide nanoparticles

Aim: We assessed the effects of flexing and massage on human skin penetration and toxicity of topically applied coated and uncoated zinc oxide nanoparticles (˜75 nm) in vivo. Materials & methods: Noninvasive multiphoton tomography with fluorescence lifetime imaging was used to evaluate the penetration of nanoparticles through the skin barrier and cellular apoptosis in the viable epidermis. Results: All nanoparticles applied to skin with flexing and massage were retained in the stratum corneum or skin furrows. No significant penetration into the viable epidermis was seen and no cellular toxicity was detected. Conclusion: Exposure of normal in vivo human skin to these nanoparticles under common in-use conditions of flexing or massage is not associated with significant adverse events.

Microneedles: A New Frontier in Nanomedicine Delivery

This review aims to concisely chart the development of two individual research fields, namely nanomedicines, with specific emphasis on nanoparticles (NP) and microparticles (MP), and microneedle (MN) technologies, which have, in the recent past, been exploited in combinatorial approaches for the efficient delivery of a variety of medicinal agents across the skin. This is an emerging and exciting area of pharmaceutical sciences research within the remit of transdermal drug delivery and as such will undoubtedly continue to grow with the emergence of new formulation and fabrication methodologies for particles and MN. Firstly, the fundamental aspects of skin architecture and structure are outlined, with particular reference to their influence on NP and MP penetration. Following on from this, a variety of different particles are described, as are the diverse range of MN modalities currently under development. The review concludes by highlighting some of the novel delivery systems which have been described in the literature exploiting these two approaches and directs the reader towards emerging uses for nanomedicines in combination with MN.

Penetration of titanium dioxide nanoparticles through slightly damaged skin in vitro and in vivo

PURPOSE

Titanium dioxide nanoparticles (TiO2-NPs) have been widely developed for versatile use, but the potential risk form their skin exposure is still unclear. To evaluate this risk, the skin penetration of TiO2-NPs is necessary to be understood first. The aims of this study are to investigated the penetration of TiO2-NPs through slightly damaged skin and intact skin in vitro and in vivo.

METHODS

TiO2-NPs with a diameter of 20 nm was labeled with 125I.The skin of rat was treated with 2% SLS solution and obtained as slightly damaged skin. The 125I labeled TiO2-NPs (125I-TiO2-NPs)solution and 0.9% PS solution were added into the donor chamber and receptor chamber of static diffusion cells which clamped the skin at the middle of two half-cells, respectively. During 24 hours, samples were extracted from the receptor chamber and counted for 1 min using γ-counter to detect the radioactivity. The skin penetration of TiO2-NPs in vitro was expressed as the percentage of radioactivity of receptor chamber solution compared with total radioactivity in the donor chamber. Thereafter, the 125I-TiO2-NPs was exposed to the rats. After 1 day and 3 days, the blood and tissues of rats were harvested, weighed and counted for 1 min using γ-counter to detect the tissue radioactivity. The skin penetration of TiO2-NPs in vivo was expressed as the percentage dose per gram tissue (% dose/g).

RESULTS

In the skin penetration experiment in vitro, the radioactivity of receptor chamber solution through damaged skin was higher than that of through intact skin and was about 2% radioactivity of donor chamber on 24 h. In the skin penetration experiment in vivo, the radioactivity of blood and tissues of rats after exposing to 125I-TiO2-NPs solution though damaged skin or intact skin were less than 0.05% dose/g on 1 d and quickly declined on 3 d. The skin penetration rates of TiO2-NPs through slightly damaged skin and intact skin in vitro and vivo were lower than the rate of free 125I in the TiO2-NPs solution.

CONCLUSIONS

The TiO2-NPs could not penetrate through the damaged skin or intact skin both in vitro and in vivo. It suggested that the TiO2-NPs should be safe when it was applied and contacted with skin.

Cutaneous exposure scenarios for engineered nanoparticles used in semiconductor fabrication: a preliminary investigation of workplace surface contamination

BACKGROUND

Numerous studies are ongoing in the fields of nanotoxicology and exposure science; however, gaps remain in identifying and evaluating potential exposures from skin contact with engineered nanoparticles in occupational settings.

OBJECTIVES

The aim of this study was to identify potential cutaneous exposure scenarios at a workplace using engineered nanoparticles (alumina, ceria, amorphous silica) and evaluate the presence of these materials on workplace surfaces.

METHODS

Process review, workplace observations, and preliminary surface sampling were conducted using microvacuum and wipe sample collection methods and transmission electron microscopy with elemental analysis.

RESULTS

Exposure scenarios were identified with potential for incidental contact. Nanoparticles of silica or silica and/or alumina agglomerates (or aggregates) were identified in surface samples from work areas where engineered nanoparticles were used or handled.

CONCLUSIONS

Additional data are needed to evaluate occupational exposures from skin contact with engineered nanoparticles; precautionary measures should be used to minimize potential cutaneous exposures in the workplace.

Nanomedicine strategies for targeting skin inflammation

Topical treatment of skin diseases is an attractive strategy as it receives high acceptance from patients, resulting in higher compliance and therapeutic outcomes. Recently, the use of variable nanocarriers for dermal application has been widely explored, as they offer several advantages compared with conventional topical preparations, including higher skin penetration, controlled and targeted drug delivery and the achievement of higher therapeutic effects. This article will focus on skin inflammation or dermatitis as it is one of the most common skin problems, describing the different types and causes of dermatitis, as well as the typical treatment regimens. The potential use of nanocarriers for targeting skin inflammation and the achievement of higher therapeutic effects using nanotechnology will be explored.

Perturbation of physiological systems by nanoparticles

Nanotechnology is having a tremendous impact on our society. However, societal concerns about human safety under nanoparticle exposure may derail the broad application of this promising technology. Nanoparticles may enter the human body via various routes, including respiratory pathways, the digestive tract, skin contact, intravenous injection, and implantation. After absorption, nanoparticles are carried to distal organs by the bloodstream and the lymphatic system. During this process, they interact with biological molecules and perturb physiological systems. Although some ingested or absorbed nanoparticles are eliminated, others remain in the body for a long time. The human body is composed of multiple systems that work together to maintain physiological homeostasis. The unexpected invasion of these systems by nanoparticles disturbs normal cell signaling, impairs cell and organ functions, and may even cause pathological disorders. This review examines the comprehensive health risks of exposure to nanoparticles by discussing how nanoparticles perturb various physiological systems as revealed by animal studies. The potential toxicity of nanoparticles to each physiological system and the implications of disrupting the balance among systems are emphasized.

Utilization of biodegradable polymeric materials as delivery agents in dermatology

Biodegradable polymeric materials are ideal carrier systems for biomedical applications. Features like controlled and sustained delivery, improved drug pharmacokinetics, reduced side effects and safe degradation make the use of these materials very attractive in a lot of medical fields, with dermatology included. A number of studies have shown that particle-based formulations can improve the skin penetration of topically applied drugs. However, for a successful translation of these promising results into a clinical application, a more rational approach is needed to take into account the different properties of diseased skin and the fate of these polymeric materials after topical application. In fact, each pathological skin condition poses different challenges and the way diseased skin interacts with polymeric carriers might be markedly different to that of healthy skin. In most inflammatory skin conditions, the skin's barrier is impaired and the local immune system is activated. A better understanding of such mechanisms has the potential to improve the efficacy of carrier-based dermatotherapy. Such knowledge would allow the informed choice of the type of polymeric carrier depending on the skin condition to be treated, the type of drug to be loaded, and the desired release kinetics. Furthermore, a better control of polymer degradation and release properties in accordance with the skin environment would improve the safety and the selectivity of drug release. This review aims at summarizing the current knowledge on how polymeric delivery systems interact with healthy and diseased skin, giving an overview of the challenges that different pathological skin conditions pose to the development of safer and more specific dermatotherapies.

Quantification of quantum dot murine skin penetration with UVR barrier impairment

Ultraviolet radiation (UVR) skin exposure is a common exogenous insult that can alter skin barrier and immune functions. With the growing presence of nanoparticles (NPs) in consumer goods and technological applications the potential for NPs to contact UVR-exposed skin is increasing. Therefore it is important to understand the effect of UVR on NP skin penetration and the potential for systemic translocation. Previous studies qualitatively showed that UVR skin exposure can increase the penetration of NPs below the stratum corneum. In this work, an in vivo mouse model was used to quantitatively examine the skin penetration of carboxylated (CdSe/ZnS, core/shell) quantum dots (QDs) through intact and UVR barrier-disrupted murine skin by organ Cd mass analysis. Transepidermal water loss was used to measure the magnitude of the skin barrier defect as a function of UVR dose and time post-UVR exposure. QDs were applied to mice 3-4 days post-UVR exposure at the peak of the skin barrier disruption. Our results reveal unexpected trends that suggest these negative-charged QDs can penetrate barrier intact skin and that penetration and systemic transport depends on the QD application time post-UVR exposure. The effect of UVR on skin-resident dendritic cells and their role in the systemic translocation of these QDs are described. Our results suggest that NP skin penetration and translocation may depend on the specific barrier insult and the inflammatory status of the skin.

Understanding engineered nanomaterial skin interactions and the modulatory effects of ultraviolet radiation skin exposure

The study of engineered nanomaterials for the development of technological applications, nanomedicine, and nano-enabled consumer products is an ever-expanding discipline as is the concern over the impact of nanotechnology on human environmental health and safety. In this review, we discuss the current state of understanding of nanomaterial skin interactions with a specific emphasis on the effects of ultraviolet radiation (UVR) skin exposure. Skin is the largest organ of the body and is typically exposed to UVR on a daily basis. This necessitates the need to understand how UVR skin exposure can influence nanomaterial skin penetration, alter nanomaterial systemic trafficking, toxicity, and skin immune function. We explore the unique dichotomy that UVR has on inducing both deleterious and therapeutic effects in skin. The subject matter covered in this review is broadly informative and will raise awareness of potential increased risks from nanomaterial skin exposure associated with specific occupational and life style choices. The UVR-induced immunosuppressive response in skin raises intriguing questions that motivate future research directions in the nanotoxicology and nanomedicine fields.

Solute-vehicle-skin interactions in percutaneous absorption: the principles and the people

An appreciation of solute-vehicle-skin interactions underpins our current understanding of the processes of percutaneous absorption as well as in the prediction of the extent of absorption. This understanding has been reached through principles developed and validated over the last century through the work of a number of authors, including Dale Wurster, Takeru Higuchi, Irvin Blank, Robert Scheuplein, Gordon Flynn, Boyd Poulsen and Tom Franz, as well as by many scientists from my and younger generations. Their work has led to an appreciation of the rate-limiting steps in percutaneous penetration, the role played by the physicochemical properties of the solute, vehicle and skin and the variability that may arise from using various experimental/mathematical/pharmacokinetic models to quantify absorption as well as enabling the prediction of local and systemic efficacy and toxicity. In addition, unexpected behaviour may result from non-ideality in solute-vehicle-skin effects, including dehydration, chemical enhancement, supersaturation, metabolism, sequestration and vascular effects, including those of nanosystems on the local vasculature. In general, in vitro skin penetration profiles are predictive of in vivo profiles but a number of exceptions also exist.

Quantum dot cytotoxicity and ways to reduce it

The dramatic increase in the use of nanoparticles (NP) in industry and research has raised questions about the potential toxicity of such materials. Unfortunately, not enough is known about how the novel, technologically-attractive properties of NPs correlate with the interactions that may take place at the nano/bio interface. The academic, industrial, and regulatory communities are actively seeking answers to the growing concerns on the impact of nanotechnology on humans. In this Account we adopt quantum dots (QDs) as an illustrative example of the difficulties associated with the development of a rational science-based approach to nanotoxicology. The optical properties of QDs are far superior to those of organic dyes in terms of emission and absorption bandwidths, quantum yield, and resistance to photobleaching. Moreover, QDs may be decorated with targeting moieties or drugs and, therefore, are candidates for site-specific medical imaging and for drug delivery, for example in cancer treatment. Earlier this year researchers demonstrated that QD-based imaging using monkeys caused no adverse effects although QDs accumulated in lymph nodes, bone marrow, liver, and spleen for up to 3 months after injection. Such persistence of QDs in live animals does, however, raise concerns about the safety of using QDs both in the laboratory and in the clinic. Researchers anticipate that QDs will be increasingly used not only in clinical applications but also in various manufactured products. For example, QD-solar cells have emerged as viable contenders to complement or replace dye-sensitized solar cells; CdTe/CdS thin film cells have already captured approximately 10 percent of the global market, and in addition, QDs can serve as components of sensors and as emitting materials in LEDs. Given the clear indications that QDs will inevitably become components of a wide range of manufactured and consumer products, researchers and policy makers need to understand the possible health risks associated with exposure to QDs. In this Account, we initially review the known mechanisms by which QDs can damage cells, including oxidative stress elicited by reactive oxygen species (ROS). We discuss lesser-known impairments induced in cells by nanomolar to picomolar concentrations of QDs, which imply that cadmium-containing QDs can exert genotoxic, epigenetic, and metalloestrogenic effects. These observations strongly suggest that minute concentrations of QDs could be sufficient to cause long lasting, even transgenerational, effects. We also consider various modes by which humans could be exposed to QDs in their work or through the environment. Although considerable advances have been made in enhancing the stability and overall quality of QDs, over time they can partially degrade in the environment or in biological systems, and eventually cause small, but cumulative undesirable effects. A combination of toxicological, genetic, epigenetic and imaging approaches is required to create comprehensive guidelines for evaluating the nanotoxicity of nanomaterials, including QDs. Prior to biological investigations with these materials, an indispensible step must be the full characterization of NPs by complementary techniques. Specifically, the concentration, size, charge, and ligand stability of NPs in biological media must be known if we are to understand fully how the properties of nanoparticles and of their biological environment contribute to cytotoxicity.

Characterization of physicochemical properties of ivy nanoparticles for cosmetic application

Background

Naturally occurring nanoparticles isolated from English ivy (Hedera helix) have previously been proposed as an alternative to metallic nanoparticles as sunscreen fillers due to their effective UV extinction property, low toxicity and potential biodegradability.

Methods

This study focused on analyzing the physicochemical properties of the ivy nanoparticles, specifically, those parameters which are crucial for use as sunscreen fillers, such as pH, temperature, and UV irradiation. The visual transparency and cytotoxicity of ivy nanoparticles were also investigated comparing them with other metal oxide nanoparticles.

Results

Results from this study demonstrated that, after treatment at 100°C, there was a clear increase in the UV extinction spectra of the ivy nanoparticles caused by the partial decomposition. In addition, the UVA extinction spectra of the ivy nanoparticles gradually reduced slightly with the decrease of pH values in solvents. Prolonged UV irradiation indicated that the influence of UV light on the stability of the ivy nanoparticle was limited and time-independent. Compared to TiO₂ and ZnO nanoparticles, ivy nanoparticles showed better visual transparency. Methylthiazol tetrazolium assay demonstrated that ivy nanoparticles exhibited lower cytotoxicity than the other two types of nanoparticles. Results also suggested that protein played an important role in modulating the three-dimensional structure of the ivy nanoparticles.

Conclusions

Based on the results from this study it can be concluded that the ivy nanoparticles are able to maintain their UV protective capability at wide range of temperature and pH values, further demonstrating their potential as an alternative to replace currently available metal oxide nanoparticles in sunscreen applications.

In vivo imaging of immune cell dynamics in skin in response to zinc-oxide nanoparticle exposure

Zinc oxide (ZnO) nanoparticles (NPs) are widely used in cosmetic and sunscreen products which are applied topically to the skin. Despite their widespread use, the safety and biological response of these particles remains an active area of investigation. In this paper we present methods based on in vivo multiphoton microscopy (MPM) in skin to address relevant questions about the potential toxicity and immunological response of ZnO NPs. Registration of time-lapse volumetric MPM images allows the same skin site to be tracked across multiple days for visualizing and quantifying cellular and structural changes in response to NP exposure. Making use of the unique optical properties of ZnO enables high contrast detection of the NPs in the presence of strong autofluorescence and second harmonic generation (SHG) background from the skin. A green fluorescent protein (GFP) bone marrow (BM) transplanted mouse model is used to visualize and assess the dynamic response of BM-derived immune cells. These cells are visualized to assess the potential for ZnO NPs to interact with immune cells and elicit an immune reaction in skin. We investigate both topical and dermal exposure of the ZnO NPs. The methods and findings presented in this paper demonstrate a novel approach for tracking ZnO NPs in vivo and for visualizing the cellular response of the exposed tissue to assess the immunological response and potential toxicity of these particles.

Skin permeation of small-molecule drugs, macromolecules, and nanoparticles mediated by a fractional carbon dioxide laser: the role of hair follicles

PURPOSE

To evaluate skin permeation enhancement mediated by fractional laser for different permeants, including hydroquinone, imiquimod, fluorescein isothiocyanate-labeled dextran (FD), and quantum dots.

METHODS

Skin received a single irradiation of a fractional CO(2) laser, using fluence of 2 or 4 mJ with densities of 100 ∼ 400 spots/cm(2). In vitro and in vivo skin penetration experiments were performed. Fluorescence and confocal microscopies for imaging delivery pathways were used.

RESULTS

The laser enhanced flux of small-molecule drugs 2 ∼ 5-fold compared to intact skin. A laser fluence of 4 mJ with a 400-spot/cm(2) density promoted FD flux at 20 and 40 kDa from 0 (passive transport) to 0.72 and 0.43 nmol/cm(2)/h, respectively. Microscopic images demonstrated a significant increase in fluorescence accumulation and penetration depth of macromolecules and nanoparticles after laser exposure. Predominant routes for laser-assisted delivery may be intercellular and follicular transport. CO(2) laser irradiation produced 13-fold enhancement in follicular deposition of imiquimod. Laser-mediated follicular transport could deliver permeants to deeper strata. Skin barrier function as determined by transepidermal water loss completely recovered by 12 h after irradiation, much faster than conventional laser treatment (4 days).

CONCLUSIONS

Fractional laser could selectively enhance permeant targeting to follicles such as imiquimod and FD but not hydroquinone, indicating the importance of selecting feasible drugs for laser-assisted follicle delivery.

The impact of UVB exposure and differentiation state of primary keratinocytes on their interaction with quantum dots

In this study we utilised an in vitro model system to gain insight into the potential cellular interactions that quantum dot (QD) nanoparticles may experience while transiting the viable skin epidermis, and we consider the effects of UVB exposure. UVB skin exposure is known to induce a skin barrier defect that facilitates QD stratum corneum penetration. Primary human keratinocytes were cultured in low and high calcium to induce basal and differentiated phenotypes, respectively. Results suggest that differentiation state plays a role in keratinocyte response to UVB exposure and exposure to negatively charged CdSe/ZnS core/shell QD. QD cell uptake increased with QD dose but association with differentiated cells was significantly lower than the basal keratinocyte phenotype. Differentiated keratinocytes were also less sensitive to the cytotoxic effects of UVB exposure. We did not observe an effect of UVB preexposure on QD cytotoxicity level despite the fact that fluorescent microscopy and flow cytometry data suggest that UVB may slightly increase QD uptake in the basal cell phenotype. The implications of these findings for assessing potential risk of human skin exposure are discussed.