Diagnostic methods for platelet bacteria screening: current status and developments

Use of flow cytometry method to detect contaminations of platelet suspensions

In this study, it was aimed to investigate bacterial contamination in apheresis platelet suspensions (APS) by automated blood culture system and flow cytometry method (FCM).33 spiked APS each using 11 bacterial strains (5 standard strains, 6 clinical isolates), were prepared in three different dilutions (1-10, 10-50, 50-100 cfu/mL), incubated in two different temperatures (35-37 °C and 22-24 °C) and different incubation times (18-96 h) evaluated by FCM. This three different dilutions were also inoculated into special platelet culture bottles (BacT/ALERT® BPA) and loaded into the blood culture system. Additionally 80 APSs routinely prepared in the Transfusion Center were evaluated by both FCM and the blood culture system. Platelets were lysed by freeze-thaw method.All spiked samples were positive with BacT/ALERT® BPA in 12-18 h. In 96 h incubation at 22-24 °C, the presence of bacteria was detected by FCM in all other samples (31/33) except low dilutions (1-10 and 10-100 CFU/ml) of K.pneumoniae standard strain. In the 35-37 °C, the presence of bacteria was detected by FCM in all samples (33/33) after 48 h of incubation. In routine APS one sample detected as positive (Bacillus simplex) with BacT/ALERT® BPA and no positivity was detected by FCM.The freeze-thaw method, which we have optimized for the lysis of platelets, is very practical and can be easily applied. The BacT/ALERT® system has been found to be very sensitive in detecting bacterial contamination in PSs. Flow cytometry method has been found to be successful, fast, easy to use and low cost in detecting bacterial contamination in PSs.

Chemical and Microbiological Changes of Expired Platelet Concentrate

Background

Platelets are a commonly used blood component to prevent or treat bleeding in patients with thrombocytopenia or platelet dysfunction. They are stored at room temperature (22-24°C) for five days unless specific measures are taken to extend the shelf life to seven days or more. After five days, this study evaluated platelet units' biochemical changes and bacterial growth.

Study Design and Methods

Platelet concentrate was collected from 30 random donors: 8 females and 22 males. The collected samples were then placed on an agitator at room temperature and tested for their pH, protein content, and glucose levels using Roche Combur 100 Test® Strips. The Haemonetics eBDS™ System was used for bacterial detection. The measurements were taken on day five as the control and then repeated on days 7, 9, and 11 to observe any changes. On days 5 and 7, all parameters remained unchanged. However, glucose levels significantly changed (p=<0.0001) on days 9 and 11. Regarding pH, a significant change was observed on day 9 (p=0.033) and day 11 (p=0.0002).

Results

There were no significant changes in all parameters on days 5 and 7. However, glucose was substantially changed (p=<0.0001) on days 9 and 11. For pH, there was a significant change in pH on day 9 (p=0.033) and day 11 (p=0.0002).

Discussions

Our study found that platelet concentrate extension is possible for up to seven days. However, further studies are needed to evaluate platelet function during expiry time and to assess the stability of platelet morphology and function.

Evaluation of bacterial safety approaches of platelet blood concentrates: bacterial screening and pathogen reduction

This mini-review analyzed two approaches to screening bacterial contamination and utilizing pathogen reduction technology (PRT) for Platelet concentrates (PCs). While the culture-based method is still considered the gold standard for detecting bacterial contamination in PCs, efforts in the past two decades to minimize transfusion-transmitted bacterial infections (TTBIs) have been insufficient to eliminate this infectious threat. PRTs have emerged as a crucial tool to enhance safety and mitigate these risks. The evidence suggests that the screening strategy for bacterial contamination is more successful in ensuring PC quality, decreasing the necessity for frequent transfusions, and improving resistance to platelet transfusion. Alternatively, the PRT approach is superior regarding PC safety. However, both methods are equally effective in managing bleeding. In conclusion, PRT can become a more prevalent means of safety for PCs compared to culture-based approaches and will soon comprehensively surpass culture-based bacterial contamination detection methods.

In vitro Hemostatic Functions of Cold-Stored Platelets

Background

Transfusion of platelets is a life-saving medical strategy used worldwide to treat patients with thrombocytopenia as well as platelet function disorders.

Summary

Until the end of 1960s, platelets were stored in the cold because of their superior hemostatic functionality. Cold storage of platelets was then abandoned due to better posttransfusion recovery and survival of room temperature (RT)-stored platelets, demonstrated by radioactive labeling studies. Based on these findings, RT became the standard condition to store platelets for clinical applications. Evidence shows that RT storage increases the risk of septic transfusion reactions associated with bacterial contamination. Therefore, the storage time is currently limited to 4-7 days, according to the national guidelines, causing a constant challenge to cover the clinical request. Despite the enormous efforts made to optimize storage conditions of platelets, the quality and efficacy of platelets still decrease during the short storage time at RT. In this context, during the last years, cold storage has seen a renaissance due to the better hemostatic functionality, reduced risk of bacterial contamination, and potentially longer storage time.

Key Messages

In this review, we will focus on the impact of cold storage on the in vitro platelet functions as promising alternative storage temperature for future medical applications.

Implementation of amotosalen plus ultraviolet A-mediated pathogen reduction for all platelet concentrates in France: Impact on the risk of transfusion-transmitted infections

BACKGROUND AND OBJECTIVES

Pathogen reduction (PR) technology may reduce the risk of transfusion-transmitted infections (TTIs), notably transfusion-transmitted bacterial infection (TTBI) associated with platelet concentrates (PCs). PR (amotosalen/UVA treatment) was implemented for all PCs transfused in France in November 2017. No bacterial detection was in place beforehand. The study aimed to assess the impact of PR PC on TTI and TTBI near-miss occurrences.

MATERIALS AND METHODS

TTI and TTBI near-miss occurrences were compared before and after 100% PR implementation. The study period ran from 2013 to 2022. Over 300,000 PCs were transfused yearly.

RESULTS

No PC-related transmission of human immunodeficiency virus, hepatitis C virus, hepatitis B virus and human T-cell lymphotropic virus was reported throughout the study period. PC-mediated hepatitis E virus and hepatitis A virus infections occurred irrespective of PR implementation. Mean PC-mediated TTBI occurrence before PR-PC implementation was 3/year (SD: 1; n = 15; 1/92,687 PC between 2013 and 2016) with a fatal outcome in two patients. Since PR implementation, one TTBI has been reported (day 4 PC, Bacillus cereus) (1/1,645,295 PC between 2018 and 2022; p < 0.001). Two PR PC quarantined because of a negative swirling test harboured bacteria: a day 6 PC in 2021 (B. cereus and Staphylococcus epidermidis) and a day 7 PC in 2022 (Staphylococcus aureus). Five similar occurrences with untreated PC were reported between 2013 and 2020.

CONCLUSION

Transfusion of 100% PR PC resulted in a steep reduction in TTBI occurrence. TTBI may, however, still occur. Pathogen-reduced PC-related TTI involving non-enveloped viruses occurs as well.

Implementation of helicase-dependent amplification with SYBR Green I for prompt naked-eye detection of bacterial contaminants in platelet products

Platelet transfusions may lead to more significant risks of infection and septic transfusion reactions that can be fatal to the recipient. Platelet products should be screened to limit or detect bacterial contamination before application to patients to minimise any adverse reactions. This study aimed to develop a helicase-dependent amplification (HDA) technique targeting a universal highly conserved bacterial gene, 16S rRNA, in combination with naked-eye detection using SYBR Green I (HDA/SYBR Green I) to detect bacterial contamination in platelet products. Thirty positive samples were obtained from spiked platelet products by five transfusion-relevant bacterial strains and were screened for bacterial contamination by HDA/SYBR Green I. HDA/SYBR Green I showed an enhanced yield of bacterial contaminant detection when performed with medium to late shelf life, Day 2 of storage or later platelet products (98.67% sensitivity and 100% specificity compared to the BACT/ALERT culture system). The limit of detection of HDA/SYBR Green I was 1 ng, and there was no cross-reaction with other organisms that could likely contaminate platelet products. The developed HDA/SYBR Green I assay is rapid and simplistic and only requires an easy-to-find heat box, available in general blood bank laboratories, for the amplification step. This technique is suitable for further development as an alternative method to detect bacterial contamination in platelet products in the near future.

Platelet transfusion in adults: An update

Many patients worldwide receive platelet components (PCs) through the transfusion of diverse types of blood components. PC transfusions are essential for the treatment of central thrombocytopenia of diverse causes, and such treatment is beneficial in patients at risk of severe bleeding. PC transfusions account for almost 10% of all the blood components supplied by blood services, but they are associated with about 3.25 times as many severe reactions (attributable to transfusion) than red blood cell transfusions after stringent in-process leukoreduction to less than 10⁶ residual cells per blood component. PCs are not homogeneous, due to the considerable differences between donors. Furthermore, the modes of PC collection and preparation, the safety precautions taken to limit either the most common (allergic-type reactions and febrile non-hemolytic reactions) or the most severe (bacterial contamination, pulmonary lesions) adverse reactions, and storage and conservation methods can all result in so-called PC "storage lesions". Some storage lesions affect PC quality, with implications for patient outcome. Good transfusion practices should result in higher levels of platelet recovery and efficacy, and lower complication rates. These practices include a matching of tissue ABH antigens whenever possible, and of platelet HLA (and, to a lesser extent, HPA) antigens in immunization situations. This review provides an overview of all the available information relating to platelet transfusion, from donor and donation to bedside transfusion, and considers the impact of the measures applied to increase transfusion efficacy while improving safety and preventing transfusion inefficacy and refractoriness. It also considers alternatives to platelet component (PC) transfusion.

The international experience of bacterial screen testing of platelet components with automated microbial detection systems: An update

In 2014, the bacterial subgroup of the Transfusion-Transmitted Infectious Diseases working party of ISBT published a review on the International Experience of Bacterial Screen Testing of Platelet Components (PCs) with an Automated Microbial Detection System. The purpose of this review, which is focused on publications on or after 2014, is to summarize recent experiences related to bacterial contamination of PCs and the use of an automated culture method to safeguard the blood supply. We first reviewed septic transfusion reactions after PC transfusion as reported in national haemovigilance systems along with a few reports from various countries on bacterial contamination of blood products. Next, we reviewed PC automated culture protocols employed by national blood services in the United Kingdom, Australia, Canada and large blood collection organization and hospital transfusion services in the United States. Then, we acknowledged the limitations of currently available culture methodologies in abating the risks of transfusion-transmitted bacterial infection, through a review of case reports. This review was neither meant to be critical of the literature reviewed nor meant to identify or recommend a best practice. We concluded that significant risk reduction can be achieved by one or a combination of more than one strategy. No one approach is feasible for all institutions worldwide. In selecting strategies, institutions should consider the possible impact on platelet components availability and entertain a risk-based decision-making approach that accounts for operational, logistical and financial factors.

UV light-emitting diode (UV-LED) at 265 nm as a potential light source for disinfecting human platelet concentrates

The risk of sepsis through bacterial transmission is one of the most serious problems in platelet transfusion. In processing platelet concentrates (PCs), several methods have been put into practice to minimize the risk of bacterial transmission, such as stringent monitoring by cultivation assays and inactivation treatment by photoirradiation with or without chemical agents. As another potential option, we applied a light-emitting diode (LED) with a peak emission wavelength of 265 nm, which has been shown to be effective for water, to disinfect PCs. In a bench-scale UV-LED exposure setup, a 10-min irradiation, corresponding to an average fluence of 9.2 mJ/cm2, resulted in >2.0 log, 1.0 log, and 0.6 log inactivation (mean, n = 6) of Escherichia coli, Staphylococcus aureus, and Bacillus cereus, respectively, in non-diluted plasma PCs. After a 30-min exposure, platelet counts decreased slightly (18 ± 7%: mean ± SD, n = 7); however, platelet surface expressions of CD42b, CD61, CD62P, and PAC-1 binding did not change significantly (P>0.005), and agonist-induced aggregation and adhesion/aggregation under flow conditions were well maintained. Our findings indicated that the 265 nm UV-LED has high potential as a novel disinfection method to ensure the microbial safety of platelet transfusion.

A dual-center evaluation of platelet culture vials to detect the presence of microorganisms in platelets

BACKGROUND

Microorganism contamination of platelets results in a high risk of transfusion-related sepsis. Here, the ability of culture vials (BD BACTEC Platelet Aerobic/F and Platelet Anaerobic/F vials, Becton, Dickinson and Company) to detect microorganisms in leukoreduced apheresis platelets (LRAPs) and leukoreduced whole blood platelet concentrates (LRWBPCs) was assessed.

METHODS

LRAPs or LRWBPCs were inoculated into Aerobic/F and Anaerobic/F vials and placed in a blood culturing system (BD BACTEC FX System, Becton, Dickinson and Company) for growth/monitoring over 7 days to detect preexisting contamination during false-positive testing. Subsequently, platelets were seeded with microorganisms at approximately 10 CFU/mL or approximately 1 CFU/mL to simulate contamination. Aerobic/F and Anaerobic/F vials were inoculated with platelets (sets of 12). Microorganism growth was detected in the BACTEC FX instrument over 7 days. Overall, 2925 vials were tested.

RESULTS

Of the 1905 vials included in the microorganism detection phase, 63 (3.3%) Aerobic/F and 16 (0.8%) Anaerobic/F vials were both BACTEC FX and subculture negative. From the remaining 1827 vials, two (0.1%) Anaerobic/F vials were false positive; no false positives were observed in Aerobic/F vials, and no false negatives occurred in either vial type. Of the remaining 1825 vials (99.9%), 955 Aerobic/F and 870 Anaerobic/F vials were true positives. The mean-time-to-detection range was 8.5 to 77 hours. All true-positive Aerobic/F and Anaerobic/F vials showed 100% agreement with subculture for positive identification of seeded microorganisms.

CONCLUSION

Aerobic/F and Anaerobic/F vials facilitate contamination detection in LRAPs and LRWBPCs down to approximately 1 CFU/mL. These results support the use of Aerobic/F and Anaerobic/F vials for quality control testing of platelets before transfusion.

Extension of the Storage Period of Platelet Concentrates in Germany to 5 Days by Bacterial Testing: Is it Worth the Effort?

The shelf life of platelet concentrates (PCs) was limited in Germany to 4 days after the day of production because platelet-related septic complications had been observed, mainly with PCs at the end of their shelf life. The reduction in PC shelf life gives rise to several problems, including an increased number of discarded products, accompanied by potential challenges of how to ensure an adequate supply of platelet products. The aim of this study was to show routine experience over the last 7 years using the Bactiflow (BF) assay to screen for bacterial contamination late in PC storage, followed by extension of PC shelf life.

Microbiological Screening of Platelet Concentrates in Europe

The risk of transfusion-associated sepsis due to transmission of bacteria is a persistent problem in the transfusion field. Despite numerous interventions to reduce the risk, cases of bacterial sepsis following transfusion are repeatedly being reported. Especially platelet concentrates are highly susceptible to bacterial contaminations due to the growth-promoting storage conditions. In Europe, blood establishments and national authorities have implemented individual precaution measures to mitigate the risk of bacterial transmission. To obtain an overview of the different approaches, we compiled information from national authorities, blood establishments, and the current literature. Several aspects such as the shelf life of platelets, time of sampling and the applied control measures are compared between the member states. The analysis of the data revealed a broad heterogeneity of procedures on a national level ranging from platelet release without any safety testing up to mandatory screening of all platelet concentrates prior to transfusion. Despite the substantial progress made in recent years, several bacterial reports on transfusion-associated sepsis indicate that further efforts are needed to increase the safety of blood transfusions in the long term.

Bordetella holmesii Contamination of Platelet Concentrates: Revisiting the Definition of a Positive Culture

Bacterial contamination remains the most important infectious risk of platelet transfusion. After an initially positive result, a second test is performed on the blood products and the initial culture bottle to confirm the contamination. Based on the blood center's decision algorithm used, results can be either confirmed negative, positive, or indeterminate, or be unconfirmed or discordant. Here, we report the first cases of platelet concentrates contaminated with Bordetella holmesii The in vitro growth characteristics of this unusual contaminant in platelet concentrate were investigated. Two B. holmesii strains isolated from platelet concentrates, as well as a control strain (Serratia marcescens), were spiked into platelet concentrates (PCs) at 1 and 10 CFU/ml. PCs were stored at 20 to 24°C under agitation. Samples were collected on days 2, 3, 4, and 7 for colony count and for bacterial screening using the BacT/Alert 3D system. Two PCs were detected as being positive for B. holmesii However, recultures were negative. In vitro, B. holmesii did not grow but remained detectable in PCs. Its viability diminished rapidly in contact with human plasma. Upon screening using the BacT/Alert 3D system, the majority of products spiked with B. holmesii were negative. This is the first description of PCs contaminated with B. holmesii This bacterium survives in blood products and remains dormant at low concentrations in blood products stored at room temperature, thus making difficult its detection with the BacT/Alert 3D system. The present definition of a true-positive culture of PCs may be overly restrictive for certain bacterial strains.

Combining culture and microbead-based immunoassay for the early and generic detection of bacteria in platelet concentrates

BACKGROUND

Despite current preventive strategies, bacterial contamination of platelets is the highest residual infectious risk in transfusion. Bacteria can grow from an initial concentration of 0.03-0.3 colony-forming units (CFUs)/mL up to 10⁸ to 10⁹ CFUs/mL over the product shelf life. The aim of this study was to develop a cost-effective approach for an early, rapid, sensitive, and generic detection of bacteria in platelet concentrates.

STUDY DESIGN AND METHODS

A large panel of bacteria involved in transfusion reactions, including clinical isolates and reference strains, was established. Sampling was performed 24 hours after platelet spiking. After an optimized culture step for increasing bacterial growth, a microbead-based immunoassay allowed the generic detection of bacteria. Antibody production and immunoassay development took place exclusively with bacteria spiked in fresh platelet concentrates to improve the specificity of the test.

RESULTS

Antibodies for the generic detection of either gram-negative or gram-positive bacteria were selected for the microbead-based immunoassay. Our approach, combining the improved culture step with the immunoassay, allowed sensitive detection of 1 to 10 CFUs/mL for gram-negative and 1 to 10² CFUs/mL for gram-positive species.

CONCLUSION

In this study, a new approach combining bacterial culture with immunoassay was developed for the generic and sensitive detection of bacteria in platelet concentrates. This efficient and easily automatable approach allows tested platelets to be used on Day 2 after collection and could represent an alternative strategy for reducing the risk of transfusion-transmitted bacterial infections. This strategy could be adapted for the detection of bacteria in other cellular products.

Bacterial contamination of platelets for transfusion: strategies for prevention

Platelet transfusions carry greater risks of infection, sepsis, and death than any other blood product, owing primarily to bacterial contamination. Many patients may be at particular risk, including critically ill patients in the intensive care unit. This narrative review provides an overview of the problem and an update on strategies for the prevention, detection, and reduction/inactivation of bacterial contaminants in platelets. Bacterial contamination and septic transfusion reactions are major sources of morbidity and mortality. Between 1:1000 and 1:2500 platelet units are bacterially contaminated. The skin bacterial microflora is a primary source of contamination, and enteric contaminants are rare but may be clinically devastating, while platelet storage conditions can support bacterial growth. Donor selection, blood diversion, and hemovigilance are effective but have limitations. Biofilm-producing species can adhere to biological and non-biological surfaces and evade detection. Primary bacterial culture testing of apheresis platelets is in routine use in the US. Pathogen reduction/inactivation technologies compatible with platelets use ultraviolet light-based mechanisms to target nucleic acids of contaminating bacteria and other pathogens. These methods have demonstrated safety and efficacy and represent a proactive approach for inactivating contaminants before transfusion to prevent transfusion-transmitted infections. One system, which combines ultraviolet A and amotosalen for broad-spectrum pathogen inactivation, is approved in both the US and Europe. Current US Food and Drug Administration recommendations advocate enhanced bacterial testing or pathogen reduction/inactivation strategies (or both) to further improve platelet safety. Risks of bacterial contamination of platelets and transfusion-transmitted infections have been significantly mitigated, but not eliminated, by improvements in prevention and detection strategies. Regulatory-approved technologies for pathogen reduction/inactivation have further enhanced the safety of platelet transfusions. Ongoing development of these technologies holds great promise.

Detection of bacterial contamination in platelet concentrates from Brazilian donors by molecular amplification of the ribosomal 16S gene

OBJECTIVE

The aim of our work was to establish a semi-automated high-throughput DNA amplification method for the universal screening of bacteria in platelet concentrates (PCs).

BACKGROUND

Among cases of transfusion transmission of infectious agents, bacterial contamination ranks first in the number of events, morbidity and mortality. Transmission occurs mainly by transfused PCs. Automated culture is adopted by some blood banks for screening of bacterial contamination, but this procedure is expensive and has a relatively long turnaround time.

METHODS

PCs were spiked with suspensions of five different bacterial species in a final concentration of 1 and 10 colony-forming units (CFU) per millilitre. After incubation, the presence of bacteria was investigated by real-time polymerase chain reaction (PCR) and by the Enhanced Bacterial Detection System (eBDS, Pall) assay as a reference method. Real-time PCR amplification was performed with a set of universal primers and probes targeting the 16S rRNA gene. Co-amplification of human mitochondrial DNA served as an internal control.

RESULTS

Using the real-time PCR method, it was possible to detect the presence of all bacterial species tested with an initial concentration of 10 CFU mL^-1 24 h after contamination, except for Staphylococcus hominis. The PCR assay also detected, at 24 h, the presence of Serratia marcescens and Enterobacter cloacae with an initial concentration of 1 CFU mL^-1 .

CONCLUSIONS

The real-time PCR assay may be a reliable alternative to conventional culture methods in the screening of bacterial contamination of PCs, enabling bacterial detection even with a low initial concentration of microorganisms.

Comparing two blood culture systems for the detection of bacterial contamination in platelet concentrates

BACKGROUND

The transfusion of platelet concentrates (PCs) contaminated with bacteria may cause serious, and even fatal, septic reactions in patients. The aim of this study was to compare the VersaTREK with the BACTEC FX automated culture systems for screening bacterial contamination, directly after the delay of 24 hours of preparation to obtain the final pooled buffy coat PCs, to prevent transfusion-transmitted bacterial infections.

STUDY DESIGN AND METHODS

Seven bacterial strains were each inoculated into five replicate pooled buffy coat PCs at approximately 100 colony-forming units/unit, and 5- or 10-mL samples were inoculated into duplicate aerobic culture bottles. The time and detection rates were compared between BACTEC FX, as a reference method, and VersaTREK.

RESULTS

Time to detection was significantly shorter using VersaTREK for most species detected by both systems for the volumes tested. Of 70 VersaTREK cultures, 69 (98.57% detection rate) were positive after 24 hours of incubation with the 5-mL sample. In contrast, the BACTEC FX system detected all positive samples in PCs for the volume of 10 mL, although seven samples were false negatives for the 5-mL volume.

CONCLUSION

The VersaTREK system compared favorably to the BACTEC FX system for 5-mL volumes (p < 0.05) and could be considered a potential method for detecting bacterial contamination in PC samples directly after 24 hours of preparation of the final pooled buffy coat PCs.

On the Way to in vitro Platelet Production

The severely decreased platelet counts (10–30. 10³ platelets/μL) frequently observed in patients undergoing chemotherapy, radiation treatment, or organ transplantation are associated with life-threatening increased bleeding risks. To circumvent these risks, platelet transfusion remains the treatment of choice, despite some limitations which include a limited shelf-life, storage-related deterioration, the development of alloantibodies in recipients and the transmission of infectious diseases. A sustained demand has evolved in recent years for controlled blood products, free of infectious, inflammatory, and immune risks. As a consequence, the challenge for blood centers in the near future will be to ensure an adequate supply of blood platelets, which calls for a reassessment of our transfusion models. To meet this challenge, many laboratories are now turning their research efforts toward the in vitro and customized production of blood platelets. In recent years, there has been a major enthusiasm for the cultured platelet production, as illustrated by the number of reviews that have appeared in recent years. The focus of the present review is to critically asses the arguments put forward in support of the culture of platelets for transfusion purposes. In light of this, we will recapitulate the main advances in this quickly evolving field, while noting the technical limitations to overcome to make cultured platelet a transfusional alternative.

On the way to in vitro platelet production

The severely decreased platelet counts (10-30.10³ platelets/μL) frequently observed in patients undergoing chemotherapy, radiation treatment or organ transplantation are associated with life-threatening increased bleeding risks. To circumvent these risks, platelet transfusion remains the treatment of choice, despite some limitations which include a limited shelf-life, storage-related deterioration, the development of alloantibodies in recipients and the transmission of infectious diseases. A sustained demand has evolved in recent years for controlled blood products, free of infectious, inflammatory and immune risks. As a consequence, the challenge for blood centers in the near future will be to ensure an adequate supply of blood platelets, which calls for a reassessment of our transfusion models. To meet this challenge, many laboratories are now turning their research efforts towards the in vitro and customized production of blood platelets.

Transfusion Medicine and Molecular Genetic Methods

Transfusion procedures are always complicated by potential genetic mismatching between donor and recipient. Compatibility is determined by several major antigens, such as the ABO and Rhesus blood groups. Matching for other blood groups (Kell, Kidd, Duffy, and MNS), human platelet antigens, and human leukocyte antigens (HLAs) also contributes toward the successful transfusion outcomes, especially in multitransfused or highly immunized patients. All these antigens of tissue identity are highly polymorphic and thus present great challenges for finding suitable donors for transfusion patients. The ABO blood group and HLA markers are also the determinants of transplant compatibility, and mismatched antigens will cause graft rejection or graft-versus-host disease. Thus, a single and comprehensive registry covering all of the significant transfusion and transplantation antigens is expected to become an important tool in providing an efficient service capable of delivering safe blood and quickly locating matching organs/stem cells. This review article is intended as an accessible guide for physicians who care for transfusion-dependent patients. In particular, it serves to introduce the new molecular screening methods together with the biology of these systems, which underlies the tests.

First Indian initiative for preparation of low-titer group "O" single-donor platelets with platelet additive solution

BACKGROUND

Guidelines recommend ABO-identical platelet (PLT) transfusions. Hemolytic reactions after a minor ABO-incompatible PLT transfusion have escalated due to single-donor platelets (SDP) containing ABO-incompatible plasma. Avoiding such events by examining titers or performing plasma reduction is cumbersome. The introduction of platelet additive solutions (PAS) has enabled to reduce these reactions by avoiding passive transfer of isoagglutinin. Our aim was to study antibody titers (anti-A, anti-B) in "O" SDP by adding PAS at source and the quality parameters with reference to viability, morphology, and metabolism.

MATERIALS AND METHODS

Group "O" SDP (n = 50) were prepared on a standard cell separator. PAS in a ratio of 70:30 (PAS: plasma) was added at source under sterile conditions (study arm). The units were studied on day of collection (day 0) and day 4 and compared with SDP containing 100% plasma (control arm). A titer study was performed after PAS addition.

RESULTS

In the study group, the median antibody titers (anti-A, anti-B) reduced from 128 to16, post-PAS addition (P < 0.001). Morphology scores were superior in PAS platelet concentrates (P < 0.001). Metabolic parameters pO2 and pCO2 were similar in the two arms signifying good unit storage and stable oxygen consumption (P > 0.05). Lactate levels, glucose consumption rate, and lactate production rates were significantly low in study arm showing the advantage of PAS.

CONCLUSION

O group SDPs can be prepared with PAS and the beneficial effects were significant with respect to antibody titers. Quality parameters were well maintained. Availability of PAS units has benefitted patients.

Highly labeled methylene blue-ds DNA silica nanoparticles for signal enhancement of immunoassays: application to the sensitive detection of bacteria in human platelet concentrates

A nanoparticle-based electrochemical immunoassay for bacteria detection in platelet concentrates.

Rapid identification of microorganisms from platelet concentrates by matrix-assisted laser desorption ionization time-of-flight mass spectrometry after short-term incubation on liquid medium

BACKGROUND

Platelets (PLTs) are especially affected by the risk of bacterial contamination. Matrix-assisted laser desorption ionization time-of-flight (MALDI-TOF) is an accurate method for the routine identification of bacterial isolates in microbiology laboratories. We directly applied the MALDI-TOF method to bacterial detection in PLTs. In this study, we evaluated the sensitivity, specificity, and speed of a direct MALDI-TOF approach compared to the conventional method BACTEC.

STUDY DESIGN AND METHODS

Eight bacteria associated with PLT contamination, cited by the ISBT on transfusion-transmitted infectious diseases, were spiked into PLTs for a final concentration of approximately 100 CFU/bag (n = 5 for each strain). The PLTs were then agitated for 24 hours. One milliliter of PLTs was incubated in a shaker incubator for 8 hours at 37°C with 1 mL of trypticase soy broth (TSB). The spectra were analyzed using the MALDI Biotyper software. As a control, 8 mL of PLTs incubated into BACTEC bottles and a positive bottle were subcultured to ensure identification of bacterial growth.

RESULTS

Regardless of the strain of PLTs tested, MALDI-TOF analysis made detection and early identification possible at 8 hours. Analysis by BACTEC of PLTs infected with Escherichia coli, Bacillus cereus, and Providencia stuartii made early identification possible. For the remaining bacteria, the detection time by BACTEC was significantly longer than 8 hours.

CONCLUSION

We demonstrated the possibility of detecting bacteria in PLTs using a standardized culture step in TSB with MALDI-TOF, regardless of the strain, with the same specificity and analytical sensitivity and with a time to results of 12 hours. This direct method presented rapid and reliable results.

Enlargement of the WHO international repository for platelet transfusion-relevant bacteria reference strains

BACKGROUND AND OBJECTIVES

Interventions to prevent and detect bacterial contamination of platelet concentrates (PCs) have reduced, but not eliminated the sepsis risk. Standardized bacterial strains are needed to validate detection and pathogen reduction technologies in PCs. Following the establishment of the First International Reference Repository of Platelet Transfusion-Relevant Bacterial Reference Strains (the 'repository'), the World Health Organization (WHO) Expert Committee on Biological Standardisation (ECBS) endorsed further repository expansion.

MATERIALS AND METHODS

Sixteen bacterial strains, including the four repository strains, were distributed from the Paul-Ehrlich-Institut (PEI) to 14 laboratories in 10 countries for enumeration, identification and growth measurement on days 2, 4 and 7 after low spiking levels [10-25 colony-forming units (CFU)/PC bag]. Spore-forming (Bacillus cereusPEI-B-P-07-S, Bacillus thuringiensisPEI-B-P-57-S), Gram-negative (Enterobacter cloacaePEI-B-P-43, Morganella morganiiPEI-B-P-74, PEI-B-P-91, Proteus mirabilisPEI-B-P-55, Pseudomonas fluorescensPEI-B-P-77, Salmonella choleraesuisPEI-B-P-78, Serratia marcescensPEI-B-P-56) and Gram-positive (Staphylococcus aureusPEI-B-P-63, Streptococcus dysgalactiaePEI-B-P-71, Streptococcus bovisPEI-B-P-61) strains were evaluated.

RESULTS

Bacterial viability was conserved after transport to the participating laboratories with one exception (M. morganiiPEI-B-P-74). All other strains showed moderate-to-excellent growth. Bacillus cereus, B. thuringiensis, E. coli, K. pneumoniae, P. fluorescens, S. marcescens, S. aureus and S. dysgalactiae grew to >10⁶ CFU/ml by day 2. Enterobacter cloacae, P. mirabilis, S. epidermidis, S. bovis and S. pyogenes achieved >10⁶ CFU/ml at day 4. Growth of S. choleraesuis was lower and highly variable.

CONCLUSION

The WHO ECBS approved all bacterial strains (except M. morganiiPEI-B-P-74 and S. choleraesuisPEI-B-P-78) for repository enlargement. The strains were stable, suitable for spiking with low CFU numbers, and proliferation was independent of the PC donor.

Immunomodulatory effect of cryopreserved platelets: altered BDCA3+ dendritic cell maturation and activation in vitro

BACKGROUND

Cryopreservation of platelets (PLTs) is useful in remote areas to overcome logistic problems associated with supply and can extend the shelf life to 2 years. During cryopreservation, properties of PLTs are modified. Whether changes in the cryopreserved PLT (CPP) product are associated with modulation of recipients' immune function is unknown. We aimed to characterize the immune profile of myeloid dendritic cells (mDCs) and the specialized blood DC antigen (BDCA)3⁺ subset after exposure to CPPs.

STUDY DESIGN AND METHODS

Using an in vitro whole blood model of transfusion, the effect of CPPs on mDC and BDCA3⁺ DC surface antigen expression and inflammatory mediator production was examined using flow cytometry. In parallel, polyinosinic:polycytidylic acid (poly(I:C)) or lipopolysaccharide (LPS) was utilized to model processes activated in viral or bacterial infection, respectively.

RESULTS

Cryopreserved PLTs had minimal impact on mDC responses but significantly modulated BDCA3⁺ DC responses in vitro. Exposure to CPPs alone up regulated BDCA3⁺ DC CD86 expression and suppressed interleukin (IL)-8, tumor necrosis factor (TNF)-α, and interferon-γ inducible protein (IP)-10 production. In both models of infection-related processes, exposure to CPPs down regulated BDCA3⁺ DC expression of CD40, CD80, and CD83 and suppressed BDCA3⁺ DC production of IL-8, IL-12, and TNF-α. CPPs suppressed CD86 expression in the presence of LPS and IP-10 and IL-6 production with poly(I:C).

CONCLUSION

Cryopreserved PLTs may be immunosuppressive, and this effect is more evident when processes associated with infection are concurrently activated, especially for BDCA3⁺ DCs. This suggests that transfusion of CPPs in patients with infection may result in impaired BDCA3⁺ DC responses.

Bacterial contamination of platelet components not detected by BacT/ALERT®

OBJECTIVES

To investigate the possible causes for false negative results in BacT/ALERT^® 3D Signature System despite bacterial contamination of platelet units.

BACKGROUND

The Northern Ireland Blood Transfusion Service (NIBTS) routinely extends platelet component shelf life to 7 days. Components are sampled and screened for bacterial contamination using an automated microbial detection system, the BacT/ALERT^® 3D Signature System. We report on three platelet components with confirmed bacterial contamination, which represent false negative BacT/ALERT^® results and near-miss serious adverse events.

METHODS

NIBTS protocols for risk reduction of bacterial contamination of platelet components are described. The methodology for bacterial detection using BacT/ALERT^® is outlined. Laboratory tests, relevant patient details and relevant follow-up information are analysed.

RESULTS

In all three cases, Staphylococcus aureus was isolated from the platelet residue and confirmed on terminal sub-culture using BacT/ALERT^® . In two cases, S. aureus with similar genetic makeup was isolated from the donors.

CONCLUSION

Risk reduction measures for bacterial contamination of platelet components are not always effective. Automated bacterial culture detection does not eliminate the risk of bacterial contamination. Visual inspection of platelet components prior to release, issue and administration remains an important last line of defence.

Hemovigilance monitoring of platelet septic reactions with effective bacterial protection systems

BACKGROUND

Delayed, large-volume bacterial culture and amotosalen/ultraviolet-A light pathogen reduction are effective at reducing the risk of bacterial proliferation in platelet concentrates (PCs). Hemovigilance programs continue to receive reports of suspected septic transfusion reactions, most with low imputability. Here, we compile national hemovigilance data to determine the relative efficacy of these interventions.

STUDY DESIGN AND METHODS

Annual reports from the United Kingdom, France, Switzerland, and Belgium were reviewed between 2005 and 2016 to assess the risk of bacterial contamination and septic reactions.

RESULTS

Approximately 1.65 million delayed, large-volume bacterial culture-screened PCs in the United Kingdom and 2.3 million amotosalen/ultraviolet-A-treated PCs worldwide were issued with no reported septic fatalities. One definite, one possible, and 12 undetermined/indeterminate septic reactions and eight contaminated "near misses" were reported with delayed, large-volume bacterial cultures between 2011 and 2016, for a lower false-negative culture rate than that in the previous 5 years (5.4 vs. 16.3 per million: odds ratio, 3.0; 95% confidence interval, 1.4-6.5). Together, the Belgian, Swiss, and French hemovigilance programs documented zero probable or definite/certain septic reactions with 609,290 amotosalen/ultraviolet-A-treated PCs (<1.6 per million). The rates were significantly lower than those reported with concurrently transfused, nonpathogen-reduced PCs in Belgium (<4.4 vs. 35.6 per million: odds ratio, 8.1; 95% confidence interval,1.1-353.3) and with historic septic reaction rates in Switzerland (<6.0 vs. 82.9 per million: odds ratio, 13.9; 95% confidence interval, 2.1-589.2), and the rates tended to be lower than those from concurrently transfused, nonpathogen-reduced PCs in France (<4.7 vs. 19.0 per million: odds ratio, 4.1; 95% confidence interval, 0.7-164.3).

CONCLUSION

Pathogen reduction and bacterial culture both reduced the incidence of septic reactions, although under-reporting and strict imputability criteria resulted in an underestimation of risk.

Genome Sequences of the First WHO Repository of Platelet Transfusion-Relevant Bacterial Reference Strains

To develop novel techniques for improving blood safety, dedicated bacterial strains, which are able to persist and to proliferate in blood platelet concentrates, are needed. Here, we present draft genome sequences of the four bacterial strains approved for the first WHO repository of platelet transfusion-relevant bacterial reference strains.

Pathogen reduction technologies: The pros and cons for platelet transfusion

The transfusion of platelets is essential for diverse pathological conditions associated with thrombocytopenia or platelet disorders. To maintain optimal platelet quality and functions, platelets are stored as platelet concentrates (PCs) at room temperature under continuous agitation-conditions that are permissive for microbial proliferation. In order to reduce these contaminants, pathogen reduction technologies (PRTs) were developed by the pharmaceutical industry and subsequently implemented by blood banks. PRTs rely on chemically induced cross-linking and inactivation of nucleic acids. These technologies were initially introduced for the treatment of plasma and, more recently, for PCs given the absence of a nucleus in platelets. Several studies verified the effectiveness of PRTs to inactivate a broad array of bacteria, viruses, and parasites. However, the safety of PRT-treated platelets has been questioned in other studies, which focused on the impact of PRTs on platelet quality and functions. In this article, we review the literature regarding PRTs, and present the advantages and disadvantages related to their application in platelet transfusion medicine.

The platelets' perspective to pathogen reduction technologies

A wide variety of clinical conditions, associated with low circulating platelet counts, require platelet transfusion in order to normalize hemostatic function. Although single-donor apheresis platelets bear the lowest risk of transfusion-transmitted infections, pathogen reduction technologies (PRT) are being implemented worldwide to reduce this risk further through inactivation of known, emergent and as yet to be discovered nucleic acid-based pathogens. Human blood platelets are now known to harbor a diverse transcriptome, important to their function and comprised of >5000 protein-coding messenger RNAs and different classes of non-coding RNAs, including microRNAs. Our appreciation of the nucleic acid-dependent functions of platelets is likely to increase. On the other hand, the side effects of PRT on platelet function are underappreciated. Recent evidences suggest that PRT may compromise platelets' responsiveness to agonists, and induce platelet activation. For instance, platelets have the propensity to release proinflammatory microparticles (MPs) upon activation, and the possibility that PRT may enhance the production of platelet MPs in platelet concentrates (PCs) appears likely. With this in mind, it would be timely and appropriate to investigate other means to inactivate pathogens more specifically, or to modify the currently available PRT so to better preserve the platelet function and improve the safety of PCs; platelets' perspective to PRT deserves to be considered.

Noninvasive pH monitoring for bacterial detection in platelet concentrates

BACKGROUND

Bacterial contamination of platelet concentrates (PCs) remains the prevalent posttransfusion infectious risk. The pH SAFE system, a noninvasive method used to measure pH of PC for quality control, was evaluated herein as a rapid method to detect bacterial contamination in PCs.

STUDY DESIGN AND METHODS

Pairs of ABO-D-matched apheresis and buffy coat PCs were pooled and split into two pH SAFE platelet bags. One of the bags served as the control unit, while the other was inoculated with one of nine clinically relevant bacteria (target concentration approx. 1 colony-forming units [CFUs]/mL). The pH of both PCs was measured over 7 days of storage at approximately 4-hour intervals during daytime. One-milliliter samples were taken at the testing points to determine bacterial concentration.

RESULTS

PCs with pH values of less than 6.6 or with a pH change over time (ΔpH/Δtime) greater or equal than 0.046 pH units/hr are suspected of being contaminated. pH decreased significantly during storage in all bacterially inoculated PC at concentrations of more than 10(7) CFUs/mL (p < 0.0001). A significant decrease in pH (p < 0.0001) was noticed as early as 28 hours in units with Bacillus cereus and as late as 125 hours in units containing Staphylococcus epidermidis. Interestingly, PCs containing Gram-negative species showed a decline in pH followed by a rebound.

CONCLUSIONS

The pH SAFE system allows for repeated, noninvasive pH screening during PC storage. A significant decrease in pH could serve as an indicator of clinically significant levels of bacterial contamination. Since differences in pH decline were observed among bacterial species, continuous pH monitoring in PCs is recommended.

Establishment of a proficiency panel for an external quality assessment programme for the detection of bacterial contamination in platelet concentrates using rapid and cultural detection methods

BACKGROUND

Platelet concentrates (PCs) are the main focus regarding the residual risk of transfusion-transmitted bacterial infections. Rapid screening methods for bacterial detection in platelets have been optimized over the last decade, but their external evaluation represents a complicated process. We developed a new type of proficiency panel for bacterial detection in PCs using currently available screening methods (especially rapid methods) suitable for external quality assessment programmes (EQAP).

METHODS

PC samples were inoculated with different bacteria at two concentrations (10E+03 CFU/ml, 10E+05 CFU/ml) and stored under temperature-controlled conditions (1-5 days). Bacterial growth was further prevented by the addition of 0-20 μg/ml cotrimoxazole. Samples were analysed prior to and after storage using rapid detection methods (Bactiflow (BF), bacteria-generic NAT) and cultural methods to determine the influence of storage and antibiotic treatment on bacterial counts and the result outcome. A pilot EQAP was performed with four participants.

RESULTS

Testing under the evaluated conditions demonstrated that bacterial counts remained constant prior to and after storage. The supplementation of 10 μg/ml cotrimoxazole did not influence bacterial detection using the two rapid detection methods BF and NAT. Furthermore, the detection of bacteria using cultural methods is still possible despite of antibiotic supplementation. The pilot EQAP confirmed these results. A storage time of up to 3 days proved practicable, showing no considerable influence on bacterial count and outcome of test results.

CONCLUSION

The established proficiency panel provided PC matrix-conform samples with stabilized bacterial counts which can be analysed in parallel by rapid and cultural detection methods.

Improving platelet transfusion safety: biomedical and technical considerations

Platelet concentrates account for near 10% of all labile blood components but are responsible for more than 25% of the reported adverse events. Besides factors related to patients themselves, who may be particularly at risk of side effects because of their underlying illness, there are aspects of platelet collection and storage that predispose to adverse events. Platelets for transfusion are strongly activated by collection through disposal equipment, which can stress the cells, and by preservation at 22 °C with rotation or rocking, which likewise leads to platelet activation, perhaps more so than storage at 4 °C. Lastly, platelets constitutively possess a very large number of bioactive components that may elicit pro-inflammatory reactions when infused into a patient. This review aims to describe approaches that may be crucial to minimising side effects while optimising safety and quality. We suggest that platelet transfusion is complex, in part because of the complexity of the "material" itself: platelets are highly versatile cells and the transfusion process adds a myriad of variables that present many challenges for preserving basal platelet function and preventing dysfunctional activation of the platelets. The review also presents information showing--after years of exhaustive haemovigilance--that whole blood buffy coat pooled platelet components are extremely safe compared to the gold standard (i.e. apheresis platelet components), both in terms of acquired infections and of immunological/inflammatory hazards.

Routine bacterial screening of platelet concentrates by flow cytometry and its impact on product safety and supply

BACKGROUND AND OBJECTIVES

Bacterial contamination represents the major infectious hazard associated with transfusion of platelet concentrates (PCs). As bacterial screening of PCs is not mandatory in Germany, the BactiFlow flow cytometry test has been introduced as a rapid detection method to increase product safety.

MATERIALS AND METHODS

During a period of 25 months, a total of 34 631 PCs (26 411 pooled and 8220 apheresis-derived PCs) were tested at the end of day 3 of their shelf life using the BactiFlow system. PCs initially reactive in BactiFlow testing and expired PCs not reactive in BactiFlow on day 3 were also investigated by the BacT/ALERT system and by microbiological cultivation in order to identify the contaminating bacterial species and to confirm reactive BactiFlow results.

RESULTS

Two hundred and twenty-eight PCs (0.7%) had an initially reactive result, 24 of them remained reactive in a second test run. Out of these reproducible reactive BactiFlow results, 12 could not be verified by parallel BacT/ALERT culturing, resulting in a confirmed false-positive rate of 0.03%. The bacterial species were identified as S. aureus, S. epidermidis, S. dysgalactiae ssp. equisimilis and B. cereus. In 10 out of 9017 expired PCs (0.11%), a confirmed-positive result was obtained in the BacT/ALERT system which had a negative result in the BactiFlow system.

CONCLUSION

Testing of PCs by BactiFlow was successfully implemented in our blood donation service and proved sufficient as a rapid and reliable screening method. False reactive results are in an acceptable range since the transfusion of 12 bacterially contaminated PCs was prevented.