Blood clots are rapidly assembled hemodynamic sensors: flow arrest triggers intraluminal thrombus contraction

A novel technique to quantify the kinetics of blood clot contraction based on the expulsion of fluorescently labeled albumin into serum

BACKGROUND

The platelet-driven contraction or retraction of blood clots has been utilized to obtain blood serum for laboratory studies, but now, in vitro clot contraction assays are used in research laboratories and clinics to assess platelet functionality. The static final extent of clot contraction measured using a clot size or expelled serum volume can be supplemented substantially with a dynamic analysis.

OBJECTIVES

To provide a step-by-step protocol for a relatively simple and affordable new automated methodology to follow the kinetics of blood clot contraction, which allows for simultaneous measurements of various samples at a time and requires only a fluorescence plate reader.

METHODS

The kinetics of clot contraction in whole blood was assessed by continuously detecting the fluorescence intensity of fluorescein isothiocyanate-albumin added to a blood sample before clotting and expelled into the serum during clot shrinkage.

RESULTS

The clots are formed and fluorescence is measured in the wells of a black multiwell plate using a standard plate fluorescent reader. The specificity of this technique for clot contraction has been demonstrated by the strong inhibitory effects of blebbistatin, latrunculin A, and abciximab. To validate the new technique, increased fluorescence intensity in the contracting clots was measured in parallel with a visual decrease in clot size performed with the same blood samples.

CONCLUSION

The resulting clot contraction dynamics based on the expulsion of fluorescein isothiocyanate-albumin can be quantified using a number of kinetic parameters as well as a phase kinetics analysis. The advantages and drawbacks of the new technique are discussed.

Hemostasis-on-a-chip / incorporating the endothelium in microfluidic models of bleeding

Currently, point-of-care assays for human platelet function and coagulation are used to assess bleeding risks and drug testing, but they lack intact endothelium, a critical component of the human vascular system. Within these assays, the assessment of bleeding risk is typically indicated by the lack of or reduced platelet function and coagulation without true evaluation of hemostasis. Hemostasis is defined as the cessation of bleeding. Additionally, animal models of hemostasis also, by definition, lack human endothelium, which may limit their clinical relevance. This review discusses the current state-of-the-art of hemostasis-on-a-chip, specifically, human cell-based microfluidic models that incorporate endothelial cells, which function as physiologically relevant in vitro models of bleeding. These assays recapitulate the entire process of vascular injury, bleeding, and hemostasis, and provide real-time, direct observation, thereby serving as research-enabling tools that enhance our understanding of hemostasis and also as novel drug discovery platforms.

Probing interactions of red blood cells and contracting fibrin platelet clots

Contraction of blood clots plays an important role in blood clotting, a natural process that restores hemostasis and regulates thrombosis in the body. Upon injury, a chain of events culminate in the formation of a soft plug of cells and fibrin fibers attaching to wound edges. Platelets become activated and apply contractile forces to shrink the overall clot size, modify clot structure, and mechanically stabilize the clot. Impaired blood clot contraction results in unhealthy volumetric, mechanical, and structural properties of blood clots associated with a range of severe medical conditions for patients with bleeding and thrombotic disorders. Due to the inherent mechanical complexity of blood clots and a confluence of multiple interdependent factors governing clot contraction, the mechanics and dynamics of clot contraction and the interactions with red blood cells (RBCs) remain elusive. Using an experimentally informed, physics-based mesoscale computational model, we probe the dynamic interactions among platelets, fibrin polymers, and RBCs, and examine the properties of contracted blood clots. Our simulations confirm that RBCs strongly affect clot contraction. We find that RBC retention and compaction in thrombi can be solely a result of mechanistic contraction of fibrin mesh due to platelet activity. Retention of RBCs hinders clot contraction and reduces clot contractility. Expulsion of RBCs located closer to clot outer surface results in the development of a dense fibrin shell in thrombus clots commonly observed in experiments. Our simulations identify the essential parameters and interactions that control blood clot contraction process, highlighting its dependence on platelet concentration and the initial clot size. Furthermore, our computational model can serve as a useful tool in clinically relevant studies of hemostasis and thrombosis disorders, and post thrombotic clot lysis, deformation, and breaking.

Activation of Piezo1 channels in compressed red blood cells augments platelet-driven contraction of blood clots

BACKGROUND

Piezo1 is a mechanosensitive cationic channel that boosts intracellular [Ca2+]i. Compression of red blood cells (RBCs) during platelet-driven contraction of blood clots may cause the activation of Piezo1.

OBJECTIVES

To establish relationships between Piezo1 activity and blood clot contraction.

METHODS

Effects of a Piezo1 agonist, Yoda1, and antagonist, GsMTx-4, on clot contraction in vitro were studied in human blood containing physiological [Ca2+]. Clot contraction was induced by exogenous thrombin. Activation of Piezo1 was assessed by Ca2+ influx in RBCs and with other functional and morphologic features.

RESULTS

Piezo1 channels in compressed RBCs are activated naturally during blood clot contraction and induce an upsurge in the intracellular [Ca2+]i, followed by phosphatidylserine exposure. Adding the Piezo1 agonist Yoda1 to whole blood increased the extent of clot contraction due to Ca2+-dependent volumetric shrinkage of RBCs and increased platelet contractility due to their hyperactivation by the enhanced generation of endogenous thrombin on activated RBCs. Addition of rivaroxaban, the inhibitor of thrombin formation, or elimination of Ca2+ from the extracellular space abrogated the stimulating effect of Yoda1 on clot contraction. The Piezo1 antagonist, GsMTx-4, caused a decrease in the extent of clot contraction relative to the control both in whole blood and in platelet-rich plasma. Activated Piezo1 in compressed and deformed RBCs amplified the platelet contractility as a positive feedback mechanism during clot contraction.

CONCLUSION

The results obtained demonstrate that the Piezo1 channel expressed on RBCs comprises a mechanochemical modulator of blood clotting that may be considered a potential therapeutic target to correct hemostatic disorders.

Image-based flow simulation of platelet aggregates under different shear rates

Hemodynamics is crucial for the activation and aggregation of platelets in response to flow-induced shear. In this paper, a novel image-based computational model simulating blood flow through and around platelet aggregates is presented. The microstructure of aggregates was captured by two different modalities of microscopy images of in vitro whole blood perfusion experiments in microfluidic chambers coated with collagen. One set of images captured the geometry of the aggregate outline, while the other employed platelet labelling to infer the internal density. The platelet aggregates were modelled as a porous medium, the permeability of which was calculated with the Kozeny-Carman equation. The computational model was subsequently applied to study hemodynamics inside and around the platelet aggregates. The blood flow velocity, shear stress and kinetic force exerted on the aggregates were investigated and compared under 800 s-1, 1600 s-1 and 4000 s-1 wall shear rates. The advection-diffusion balance of agonist transport inside the platelet aggregates was also evaluated by local Péclet number. The findings show that the transport of agonists is not only affected by the shear rate but also significantly influenced by the microstructure of the aggregates. Moreover, large kinetic forces were found at the transition zone from shell to core of the aggregates, which could contribute to identifying the boundary between the shell and the core. The shear rate and the rate of elongation flow were investigated as well. The results imply that the emerging shapes of aggregates are highly correlated to the shear rate and the rate of elongation. The framework provides a way to incorporate the internal microstructure of the aggregates into the computational model and yields a better understanding of the hemodynamics and physiology of platelet aggregates, hence laying the foundation for predicting aggregation and deformation under different flow conditions.

Platelet factor XIII-A regulates platelet function and promotes clot retraction and stability

Background

Factor XIII (FXIII) is an important proenzyme in the hemostatic system. The plasma-derived enzyme activated FXIII cross-links fibrin fibers within thrombi to increase their mechanical strength and cross-links fibrin to fibrinolytic inhibitors, specifically α2-antiplasmin, to increase resistance to fibrinolysis. We have previously shown that cellular FXIII (factor XIII-A [FXIII-A]), which is abundant in the platelet cytoplasm, is externalized onto the activated membrane and cross-links extracellular substrates. The contribution of cellular FXIII-A to platelet activation and platelet function has not been extensively studied.

Objectives

This study aims to identify the role of platelet FXIII-A in platelet function.

Methods

We used normal healthy platelets with a cell permeable FXIII inhibitor and platelets from FXIII-deficient patients as a FXIII-free platelet model in a range of platelet function and clotting tests.

Results

Our data demonstrate that platelet FXIII-A enhances fibrinogen binding to the platelet surface upon agonist stimulation and improves the binding of platelets to fibrinogen and aggregation under flow in a whole-blood thrombus formation assay. In the absence of FXIII-A, platelets show reduced sensitivity to agonist stimulation, including decreased P-selectin exposure and fibrinogen binding. We show that FXIII-A is involved in platelet spreading where a lack of FXIII-A reduces the ability of platelets to fully spread on fibrinogen and collagen. Our data demonstrate that platelet FXIII-A is important for clot retraction where clots formed in its absence retracted to a lesser extent.

Conclusion

Overall, this study shows that platelet FXIII-A functions during thrombus formation by aiding platelet activation and thrombus retraction in addition to its antifibrinolytic roles.

Investigating thrombin-loaded fibrin in whole blood clot microfluidic assay via fluorogenic peptide

During clotting under flow, thrombin rapidly generates fibrin, whereas fibrin potently sequesters thrombin. This co-regulation was studied using microfluidic whole blood clotting on collagen/tissue factor, followed by buffer wash, and a start/stop cycling flow assay using the thrombin fluorogenic substrate, Boc-Val-Pro-Arg-AMC. After 3 min of clotting (100 s-1) and 5 min of buffer wash, non-elutable thrombin activity was easily detected during cycles of flow cessation. Non-elutable thrombin was similarly detected in plasma clots or arterial whole blood clots (1000 s-1). This thrombin activity was ablated by Phe-Pro-Arg-chloromethylketone (PPACK), apixaban, or Gly-Pro-Arg-Pro to inhibit fibrin. Reaction-diffusion simulations predicted 108 nM thrombin within the clot. Heparin addition to the start/stop assay had little effect on fibrin-bound thrombin, whereas addition of heparin-antithrombin (AT) required over 6 min to inhibit the thrombin, indicating a substantial diffusion limitation. In contrast, heparin-AT rapidly inhibited thrombin within microfluidic plasma clots, indicating marked differences in fibrin structure and functionality between plasma clots and whole blood clots. Addition of GPVI-Fab to blood before venous or arterial clotting (200 or 1000 s-1) markedly reduced fibrin-bound thrombin, whereas GPVI-Fab addition after 90 s of clotting had no effect. Perfusion of AF647-fibrinogen over washed fluorescein isothiocyanate (FITC)-fibrin clots resulted in an intense red layer around, but not within, the original FITC-fibrin. Similarly, introduction of plasma/AF647-fibrinogen generated substantial red fibrin masses that did not penetrate the original green clots, demonstrating that fibrin cannot be re-clotted with fibrinogen. Overall, thrombin within fibrin is non-elutable, easily accessed by peptides, slowly accessed by average-sized proteins (heparin/AT), and not accessible to fresh fibrinogen.

Recent Advances in Blood Cell-Inspired and Clot Targeted Thrombolytic Therapies

Myocardial infarction, stroke, and pulmonary embolism are all deadly conditions associated with excessive thrombus formation. Standard treatment for these conditions involves systemic delivery of thrombolytic agents to break up clots and restore blood flow; however, this treatment can impact the hemostatic balance in other parts of the vasculature, which can lead to excessive bleeding. To avoid this potential danger, targeted thrombolytic treatments that can successfully target thrombi and release an effective therapeutic load are necessary. Because activated platelets and fibrin make up a large proportion of clots, these two components provide ample opportunities for targeting. This review will highlight potential thrombus targeting mechanisms as well as recent advances in thrombolytic therapies which utilize blood-cells and clotting proteins to effectively target and lyse clots.

Non-porous thrombi are less pervious and easier to be retrieved: implication from scanning electron microscopy study

BACKGROUND

Scanning electron microscopy (SEM) studies found that the porosity of thrombi might vary among individuals. However, its relationship with the clinical presentation and efficacy of mechanical thrombectomy (MT) remains unknown. We aimed to characterize the ultrastructure of thrombi and explore its association with the complexity of MT and clot perviousness.

METHODS

SEM was used to observe the morphological features of different components of thrombi obtained from patients with anterior circulation large vessel occlusion undergoing MT and to determine the porosity of thrombi by semi-quantitative analysis. Non-porous thrombi were defined as thrombi with porosity <2%. Clot perviousness was also evaluated using thrombus attenuation increase on CT perfusion (TAI_ctp). We assessed the complexity of MT by attempts of retrieval >3 and procedural duration >60 min, defined as the time interval between groin puncture and recanalization.

RESULTS

A total of 49 thrombi were analyzed and 31 (63.3%) were classified as non-porous thrombi. The presence of non-porous thrombi was negatively associated with procedure >60 min (OR 0.152, 95% CI 0.031 to 0.734, p=0.019) and attempts >3 (OR 0.194, 95% CI 0.046 to 0.822, p=0.026) after adjustment. Additionally, receiver operating characteristic curve analysis indicated that TAI_ctp <17.9 Hounsfield units could predict the presence of non-porous thrombi with an area under the curve of 0.915.

CONCLUSIONS

Non-porous thrombi on SEM are easier to be retrieved during MT and could be identified as less pervious clots on CT images.

Blood clot contraction: Mechanisms, pathophysiology, and disease

A State of the Art lecture titled "Blood Clot Contraction: Mechanisms, Pathophysiology, and Disease" was presented at the International Society on Thrombosis and Haemostasis (ISTH) Congress in 2022. This was a systematic description of blood clot contraction or retraction, driven by activated platelets and causing compaction of the fibrin network along with compression of the embedded erythrocytes. The consequences of clot contraction include redistribution of the fibrin-platelet meshwork toward the periphery of the clot and condensation of erythrocytes in the core, followed by their deformation from the biconcave shape into polyhedral cells (polyhedrocytes). These structural signatures of contraction have been found in ex vivo thrombi derived from various locations, which indicated that clots undergo intravital contraction within the blood vessels. In hemostatic clots, tightly packed polyhedrocytes make a nearly impermeable seal that stems bleeding and is impaired in hemorrhagic disorders. In thrombosis, contraction facilitates the local blood flow by decreasing thrombus obstructiveness, reducing permeability, and changing susceptibility to fibrinolytic enzymes. However, in (pro)thrombotic conditions, continuous background platelet activation is followed by platelet exhaustion, refractoriness, and impaired intravital clot contraction, which is associated with weaker thrombi predisposed to embolization. Therefore, assays that detect imperfect in vitro clot contraction have potential diagnostic and prognostic values for imminent or ongoing thrombosis and thrombotic embolism. Collectively, the contraction of blood clots and thrombi is an underappreciated and understudied process that has a pathogenic and clinical significance in bleeding and thrombosis of various etiologies. Finally, we have summarized relevant new data on this topic presented during the 2022 ISTH Congress.

Multifunctional exosomes derived from bone marrow stem cells for fulfilled osseointegration

Bone marrow mesenchymal stem cells (BMSCs) have self-renewal, multi-directional differentiation potential, and immune regulation function and are widely used for de novo bone formation. However, the wide variation in individual amplification, the potential risk of cancer cell contamination, and the need for culture time significantly limit their widespread use clinically. Alternatively, numerous studies have shown that exosomes secreted by BMSCs in the nanoscale can also affect the functionality of endothelial cells (angiogenesis), macrophages (immunomodulation), and osteoblasts/osteoclasts (osteogenesis), which is a highly promising therapy for osseointegration with pronounced advantages (e.g., safety, high efficiency, and no ethical restrictions). The review aims to summarize the multifaceted effect of BMSCs-derived exosomes on osseointegration and provide reference and basis for rapid and qualified osseointegration.

Effects of diabetes mellitus complicated by admission hyperglycemia on clot histological composition and ultrastructure in patients with acute ischemic stroke

Background

Type 2 diabetes mellitus (T2DM) affects the occurrence and prognosis of acute ischemic stroke (AIS). However, the impact of diabetes on thrombus characteristics is unclear. The relationship between the composition and ultrastructure of clots and DM with admission hyperglycemia was investigated.

Methods

Consecutive patients with AIS who underwent endovascular thrombus retrieval between June 2017 and May 2021 were recruited. The thrombus composition and ultrastructure were evaluated using Martius scarlet blue stain and scanning electron microscopy. Clot perviousness was evaluated via thrombus attenuation increase on computed tomography angiography (CTA) versus non-contrast CT. Patients with admission hyperglycemia DM (ahDM) and those without DM (nonDM) were compared in terms of thrombus composition, ultrastructure, and perviousness.

Results

On admission, higher NIHSS scores (17 vs. 12, respectively, p = 0.015) was evident in ahDM patients. After the 90-day follow-up, the rates of excellent outcomes (mRS 0–1) were lower in patients with ahDM (16.6%, p = 0.038), but functional independence (mRS 0–2) and handicapped (mRS 3–5) were comparable between patients with ahDM and nonDM. The outcome of mortality was higher in patients with ahDM (33.3%, p = 0.046) than in nonDM patients. Clots in patients with ahDM had more fibrin (39.4% vs. 25.0%, respectively, p = 0.007), fewer erythrocyte components (21.2% vs. 41.5%, respectively, p = 0.043), equivalent platelet fraction (27.7% vs. 24.6%, respectively, p = 0.587), and higher WBC counts (4.6% vs. 3.3%, respectively, p = 0.004) than in nonDM patients. The percentage of polyhedral erythrocytes in thrombi was significantly higher in ahDM patients than in nonDM patients (68.9% vs. 45.6%, respectively, p = 0.007). The proportion of pervious clots was higher in patients nonDM than in patients with ahDM (82.61% vs. 40%, respectively, p = 0.026).

Conclusion

Patients with ahDM presented with greater stroke severity on admission and poorer functional outcomes after 3 months. Clots in patients with ahDM had more fibrin, leucocytes, and fewer erythrocyte components than in patients nonDM. The content of polyhedral erythrocytes and impervious clots proportion were significantly higher in thrombi of patients with AIS and ahDM. Further research is required to validate these findings.

Platelet Mechanobiology Inspired Microdevices: From Hematological Function Tests to Disease and Drug Screening

Platelet function tests are essential to profile platelet dysfunction and dysregulation in hemostasis and thrombosis. Clinically they provide critical guidance to the patient management and therapeutic evaluation. Recently, the biomechanical effects induced by hemodynamic and contractile forces on platelet functions attracted increasing attention. Unfortunately, the existing platelet function tests on the market do not sufficiently incorporate the topical platelet mechanobiology at play. Besides, they are often expensive and bulky systems that require large sample volumes and long processing time. To this end, numerous novel microfluidic technologies emerge to mimic vascular anatomies, incorporate hemodynamic parameters and recapitulate platelet mechanobiology. These miniaturized and cost-efficient microfluidic devices shed light on high-throughput, rapid and scalable platelet function testing, hematological disorder profiling and antiplatelet drug screening. Moreover, the existing antiplatelet drugs often have suboptimal efficacy while incurring several adverse bleeding side effects on certain individuals. Encouraged by a few microfluidic systems that are successfully commercialized and applied to clinical practices, the microfluidics that incorporate platelet mechanobiology hold great potential as handy, efficient, and inexpensive point-of-care tools for patient monitoring and therapeutic evaluation. Hereby, we first summarize the conventional and commercially available platelet function tests. Then we highlight the recent advances of platelet mechanobiology inspired microfluidic technologies. Last but not least, we discuss their future potential of microfluidics as point-of-care tools for platelet function test and antiplatelet drug screening.

A three-dimensional multiscale model for the prediction of thrombus growth under flow with single-platelet resolution

Modeling thrombus growth in pathological flows allows evaluation of risk under patient-specific pharmacological, hematological, and hemodynamical conditions. We have developed a 3D multiscale framework for the prediction of thrombus growth under flow on a spatially resolved surface presenting collagen and tissue factor (TF). The multiscale framework is composed of four coupled modules: a Neural Network (NN) that accounts for platelet signaling, a Lattice Kinetic Monte Carlo (LKMC) simulation for tracking platelet positions, a Finite Volume Method (FVM) simulator for solving convection-diffusion-reaction equations describing agonist release and transport, and a Lattice Boltzmann (LB) flow solver for computing the blood flow field over the growing thrombus. A reduced model of the coagulation cascade was embedded into the framework to account for TF-driven thrombin production. The 3D model was first tested against in vitro microfluidics experiments of whole blood perfusion with various antiplatelet agents targeting COX-1, P₂Y₁, or the IP receptor. The model was able to accurately capture the evolution and morphology of the growing thrombus. Certain problems of 2D models for thrombus growth (artifactual dendritic growth) were naturally avoided with realistic trajectories of platelets in 3D flow. The generalizability of the 3D multiscale solver enabled simulations of important clinical situations, such as cylindrical blood vessels and acute flow narrowing (stenosis). Enhanced platelet-platelet bonding at pathologically high shear rates (e.g., von Willebrand factor unfolding) was required for accurately describing thrombus growth in stenotic flows. Overall, the approach allows consideration of patient-specific platelet signaling and vascular geometry for the prediction of thrombotic episodes.

The excessive formation of blood clots under flow within the circulatory system (thrombosis) is known to initiate heart attacks and strokes. Therefore, obtaining insights into the formation and progression of these clots will be useful in evaluating pharmacological options. To this end, we have developed a 3D computational model that tracks the growth of a blood clot under flow from initial platelet deposition to full vessel occlusion in the presence of soluble platelet agonists. We first validated the model against experimental predictions of blood clots formed in vitro. Due to the construction of the model in 3D, we were able to carry out simulations of clot formation under important clinical situations, namely cylindrical blood vessels and acute flow narrowings (stenoses). To our knowledge, our model is the first of its kind that can account for patient-specific platelet phenotypes to perform robust 3D simulations of thrombus growth in geometries of clinical relevance.

Extent of intravital contraction of arterial and venous thrombi and pulmonary emboli

Ratio of compressed polyhedral to native biconcave RBCs in blood clots and thrombi is a “ruler” to measure extent of clot contraction.

The extent of intravital contraction of ex vivo arterial and venous thrombi is associated with their origins, age, and embologenicity.

Blood clots and thrombi undergo platelet-driven contraction/retraction followed by structural rearrangements. We have established quantitative relationships between the composition of blood clots and extent of contraction to determine intravital contraction of thrombi and emboli based on their content. The composition of human blood clots and thrombi was quantified using histology and scanning electron microscopy. Contracting blood clots were segregated into the gradually shrinking outer layer that contains a fibrin-platelet mesh and the expanding inner portion with compacted red blood cells (RBCs). At 10% contraction, biconcave RBCs were partially compressed into polyhedral RBCs, which became dominant at 20% contraction and higher. The polyhedral/biconcave RBC ratio and the extent of contraction displayed an exponential relationship, which was used to determine the extent of intravital contraction of ex vivo thrombi, ranging from 30% to 50%. In venous thrombi, the extent of contraction decreased gradually from the older (head) to the younger (body, tail) parts. In pulmonary emboli, the extent of contraction was significantly lower than in the venous head but was similar to the body and tail, suggesting that the emboli originate from the younger portion(s) of venous thrombi. The extent of contraction in arterial cerebral thrombi was significantly higher than in the younger parts of venous thrombi (body, tail) and pulmonary emboli but was indistinguishable from the older part (head). A novel tool, named the “contraction ruler,” has been developed to use the composition of ex vivo thrombi to assess the extent of their intravital contraction, which contributes to the pathophysiology of thromboembolism.

Emerging Microfluidic Approaches for Platelet Mechanobiology and Interplay With Circulatory Systems

Understanding how platelets can sense and respond to hemodynamic forces in disturbed blood flow and complexed vasculature is crucial to the development of more effective and safer antithrombotic therapeutics. By incorporating diverse structural and functional designs, microfluidic technologies have emerged to mimic microvascular anatomies and hemodynamic microenvironments, which open the floodgates for fascinating platelet mechanobiology investigations. The latest endothelialized microfluidics can even recapitulate the crosstalk between platelets and the circulatory system, including the vessel walls and plasma proteins such as von Willebrand factor. Hereby, we highlight these exciting microfluidic applications to platelet mechanobiology and platelet–circulatory system interplay as implicated in thrombosis. Last but not least, we discuss the need for microfluidic standardization and summarize the commercially available microfluidic platforms for researchers to obtain reproducible and consistent results in the field.

Thrombosis and Hemodynamics: external and intrathrombus gradients

Distinct from dilute, isotropic, and homogeneous reaction systems typically used in laboratory kinetic assays, blood is concentrated, two-phase, flowing, and highly anisotropic when clotting on a surface. This review focuses on spatial gradients that are generated and can dictate thrombus structure and function. Novel experimental and computational tools have recently emerged to explore reaction-transport coupling during clotting. Multiscale simulations help bridge tissue length scales (the coronary arteries) to millimeter scales of a growing clot to the microscopic scale of single-cell signaling and adhesion. Microfluidic devices help create and control pathological velocity profiles, albeit at a low Reynolds number. Since rate processes and force loading are often coupled, this review highlights prevailing convective-diffusive transport physics that modulate cellular and molecular processes during thrombus formation.

Point of care whole blood microfluidics for detecting and managing thrombotic and bleeding risks

Point-of-care diagnostics of platelet and coagulation function present demanding challenges. Current clinical diagnostics often use centrifuged plasmas or platelets and frozen plasma standards, recombinant protein standards, or even venoms. Almost all commercialized tests of blood do not recreate the in vivo hemodynamics where platelets accumulate to high densities and thrombin is generated from a procoagulant surface. Despite numerous drugs that target platelets, insufficient coagulation, or excess coagulation, POC blood testing is essentially limited to viscoelastic methods that provide a clotting time, clot strength, and clot lysis, while used mostly in trauma centers with specialized capabilities. Microfluidics now allows small volumes of whole blood (<1 mL) to be tested under venous or arterial shear rates with multi-color readouts to follow platelet function, thrombin generation, fibrin production, and clot stability. Injection molded chips containing pre-patterned fibrillar collagen and lipidated tissue factor can be stored dry for 6 months at 4C, thus allowing rapid blood testing on single-use disposable chips. Using only a small imaging microscope and micropump, these microfluidic devices can detect platelet inhibitors, direct oral anticoagulants (DOACs) and their reversal agents. POC microfluidics are ideal for neonatal surgical applications that involve small blood samples, rapid DOAC testing in stroke or bleeding or emergency surgery situations with patients presenting high risk cofactors for either bleeding or thrombosis.

Clot Retraction: Cellular Mechanisms and Inhibitors, Measuring Methods, and Clinical Implications

Platelets have important functions in hemostasis. Best investigated is the aggregation of platelets for primary hemostasis and their role as the surface for coagulation leading to fibrin- and clot-formation. Importantly, the function of platelets does not end with clot formation. Instead, platelets are responsible for clot retraction through the concerted action of the activated αIIbβ3 receptors on the surface of filopodia and the platelet's contractile apparatus binding and pulling at the fibrin strands. Meanwhile, the signal transduction events leading to clot retraction have been investigated thoroughly, and several targets to inhibit clot retraction have been demonstrated. Clot retraction is a physiologically important mechanism allowing: (1) the close contact of platelets in primary hemostasis, easing platelet aggregation and intercellular communication, (2) the reduction of wound size, (3) the compaction of red blood cells to a polyhedrocyte infection-barrier, and (4) reperfusion in case of thrombosis. Several methods have been developed to measure clot retraction that have been based on either the measurement of clot volume or platelet forces. Concerning the importance of clot retraction in inborn diseases, the failure of clot retraction in Glanzmann thrombasthenia is characterized by a bleeding phenotype. Concerning acquired diseases, altered clot retraction has been demonstrated in patients with coronary heart disease, stroke, bronchial asthma, uremia, lupus erythematodes, and other diseases. However, more studies on the diagnostic and prognostic value of clot retraction with methods that have to be standardized are necessary.

Pathologically stiff erythrocytes impede contraction of blood clots

BACKGROUND

Blood clot contraction, volume shrinkage of the clot, is driven by platelet contraction and accompanied by compaction of the erythrocytes and their gradual shape change from biconcave to polyhedral, with the resulting cells named polyhedrocytes.

OBJECTIVES

Here, we examined the role of erythrocyte rigidity on clot contraction and erythrocyte shape transformation.

METHODS

We used an optical tracking methodology that allowed us to quantify changes in contracting clot size over time.

RESULTS AND CONCLUSIONS

Erythrocyte rigidity has been shown to be increased in sickle cell disease (SCD), and in our experiments erythrocytes from SCD patients were 4-fold stiffer than those from healthy subjects. On average, the final extent of clot contraction was reduced by 53% in the clots from the blood of patients with SCD compared to healthy individuals, and there was significantly less polyhedrocyte formation. To test if this reduction in clot contraction was due to the increase in erythrocyte rigidity, we used stiffening of erythrocytes via chemical cross-linking (glutaraldehyde), rigidifying Wrightb antibodies (Wrb ), and naturally more rigid llama ovalocytes. Results revealed that stiffening erythrocytes result in impaired clot contraction and fewer polyhedrocytes. These results demonstrate the role of erythrocyte rigidity in the contraction of blood clots and suggest that the impaired clot contraction/shrinkage in SCD is due to the reduced erythrocyte deformability, which may be an underappreciated mechanism that aggravates obstructiveness of erythrocyte-rich (micro)thrombi in SCD.

Platelet-Therapeutics to Improve Tissue Regeneration and Wound Healing-Physiological Background and Methods of Preparation

Besides their function in primary hemostasis, platelets are critically involved in the physiological steps leading to wound healing and tissue repair. For this purpose, platelets have a complex set of receptors allowing the recognition, binding, and manipulation of extracellular structures and the detection of pathogens and tissue damage. Intracellular vesicles contain a huge set of mediators that can be released to the extracellular space to coordinate the action of platelets as other cell types for tissue repair. Therapeutically, the most frequent use of platelets is the intravenous application of platelet concentrates in case of thrombocytopenia or thrombocytopathy. However, there is increasing evidence that the local application of platelet-rich concentrates and platelet-rich fibrin can improve wound healing and tissue repair in various settings in medicine and dentistry. For the therapeutic use of platelets in wound healing, several preparations are available in clinical practice. In the present study we discuss the physiology and the cellular mechanisms of platelets in hemostasis and wound repair, the methods used for the preparation of platelet-rich concentrates and platelet-rich fibrin, and highlight some examples of the therapeutic use in medicine and dentistry.

Physical forces regulating hemostasis and thrombosis: Vessels, cells, and molecules in illustrated review

This illustrated review focuses on the physical forces that regulate hemostasis and thrombosis. These phenomena span from the vessel to the cellular to the molecular scales. Blood is a complex fluid with a viscosity that varies with how fast it flows and the size of the vessel through which it flows. Blood flow imposes forces on the vessel wall and blood cells that dictates the kinetics, structure, and stability of thrombi. The mechanical properties of blood cells create a segmented flowing fluid whereby red blood cells concentrate in the vessel core and platelets marginate to the near-wall region. At the vessel wall, shear stresses are highest, which requires a repertoire of receptors with different bond kinetics to roll, tether, adhere, and activate on inflamed endothelium and extracellular matrices. As a thrombus grows and then contracts, forces regulate platelet aggregation as well as von Willebrand factor function and fibrin mechanics. Forces can also originate from platelets as they respond to the external forces and sense the stiffness of their local environment.

Fibrin(ogen) as a Therapeutic Target: Opportunities and Challenges

Fibrinogen is one of the key molecular players in haemostasis. Thrombin-mediated release of fibrinopeptides from fibrinogen converts this soluble protein into a network of fibrin fibres that form a building block for blood clots. Thrombin-activated factor XIII further crosslinks the fibrin fibres and incorporates antifibrinolytic proteins into the network, thus stabilising the clot. The conversion of fibrinogen to fibrin also exposes binding sites for fibrinolytic proteins to limit clot formation and avoid unwanted extension of the fibrin fibres. Altered clot structure and/or incorporation of antifibrinolytic proteins into fibrin networks disturbs the delicate equilibrium between clot formation and lysis, resulting in either unstable clots (predisposing to bleeding events) or persistent clots that are resistant to lysis (increasing risk of thrombosis). In this review, we discuss the factors responsible for alterations in fibrin(ogen) that can modulate clot stability, in turn predisposing to abnormal haemostasis. We also explore the mechanistic pathways that may allow the use of fibrinogen as a potential therapeutic target to treat vascular thrombosis or bleeding disorders. Better understanding of fibrinogen function will help to devise future effective and safe therapies to modulate thrombosis and bleeding risk, while maintaining the fine balance between clot formation and lysis.

Computational investigation of platelet thrombus mechanics and stability in stenotic channels

The stability of a platelet thrombus under flow is believed to depend strongly on the local hemodynamics and on the thrombus' porosity, permeability, and elasticity. A two-phase continuum model is used to investigate the biomechanics of thrombus stability in stenotic channels. It treats the thrombus as a porous, viscoelastic material moving differently than the background fluid. The dynamic clot-flow interaction is modeled through a frictional drag term. The model explicitly tracks the formation and breaking of interplatelet molecular bonds, which directly determine the viscoelastic property of the thrombus and govern its ability to resist fluid drag. We characterize the stability/fragility of thrombi for various flow speeds, porosities, bond concentrations, and bond types.

Factor XIII-A: An Indispensable "Factor" in Haemostasis and Wound Healing

Factor XIII (FXIII) is a transglutaminase enzyme that catalyses the formation of ε-(γ-glutamyl)lysyl isopeptide bonds into protein substrates. The plasma form, FXIIIA₂B₂, has an established function in haemostasis, with fibrin being its principal substrate. A deficiency in FXIII manifests as a severe bleeding diathesis emphasising its crucial role in this pathway. The FXIII-A gene (F13A1) is expressed in cells of bone marrow and mesenchymal lineage. The cellular form, a homodimer of the A subunits denoted FXIII-A, was perceived to remain intracellular, due to the lack of a classical signal peptide for its release. It is now apparent that FXIII-A can be externalised from cells, by an as yet unknown mechanism. Thus, three pools of FXIII-A exist within the circulation: plasma where it circulates in complex with the inhibitory FXIII-B subunits, and the cellular form encased within platelets and monocytes/macrophages. The abundance of this transglutaminase in different forms and locations in the vasculature reflect the complex and crucial roles of this enzyme in physiological processes. Herein, we examine the significance of these pools of FXIII-A in different settings and the evidence to date to support their function in haemostasis and wound healing.

Asymmetrical Forces Dictate the Distribution and Morphology of Platelets in Blood Clots

Primary hemostasis consists in the activation of platelets, which spread on the exposed extracellular matrix at the injured vessel surface. Secondary hemostasis, the coagulation cascade, generates a fibrin clot in which activated platelets and other blood cells get trapped. Active platelet-dependent clot retraction reduces the clot volume by extruding the serum. Thus, the clot architecture changes with time of contraction, which may have an important impact on the healing process and the dissolution of the clot, but the precise physiological role of clot retraction is still not completely understood. Since platelets are the only actors to develop force for the retraction of the clot, their distribution within the clot should influence the final clot architecture. We analyzed platelet distributions in intracoronary thrombi and observed that platelets and fibrin co-accumulate in the periphery of retracting clots in vivo. A computational mechanical model suggests that asymmetric forces are responsible for a different contractile behavior of platelets in the periphery versus the clot center, which in turn leads to an uneven distribution of platelets and fibrin fibers within the clot. We developed an in vitro clot retraction assay that reproduces the in vivo observations and follows the prediction of the computational model. Our findings suggest a new active role of platelet contraction in forming a tight fibrin- and platelet-rich boundary layer on the free surface of fibrin clots.

Haemodynamic flow conditions at the initiation of high-shear platelet aggregation: a combined in vitro and cellular in silico study

The influence of the flow environment on platelet aggregation is not fully understood in high-shear thrombosis. The objective of this study is to investigate the role of a high shear rate in initial platelet aggregation. The haemodynamic conditions in a microfluidic device are studied using cell-based blood flow simulations. The results are compared with in vitro platelet aggregation experiments performed with porcine whole blood (WB) and platelet-rich-plasma (PRP). We studied whether the cell-depleted layer in combination with high shear and high platelet flux can account for the distribution of platelet aggregates. High platelet fluxes at the wall were found in silico. In WB, the platelet flux was about twice as high as in PRP. Additionally, initial platelet aggregation and occlusion were observed in vitro in the stenotic region. In PRP, the position of the occlusive thrombus was located more downstream than in WB. Furthermore, the shear rates and stresses in cell-based and continuum simulations were studied. We found that a continuum simulation is a good approximation for PRP. For WB, it cannot predict the correct values near the wall.

In vitro flow-based assay: From simple toward more sophisticated models for mimicking hemostasis and thrombosis

In vitro flow-based assays are widely used to investigate the role of platelets and coagulation in hemostasis and thrombosis. Their main advantage over other assays relies on the fact that they integrate blood flow that regulates many aspects of platelet function, including adhesion, activation, and aggregation. Blood flow is also central in the regulation of coagulation through its ability to modulate the local concentrations of coagulation factors within and around thrombi. The most broadly used assay to study thrombus formation consists in perfusing whole blood over immobilized fibrillar collagen through a single channel, which helps to reproduce thrombus formation as it occurs in vivo after vascular injury, with platelets adhering, becoming activated, and forming a mural thrombus. This process can also be studied under conditions of thrombin generation, notably by recalcifying blood collected in sodium citrate. In this manuscript, we briefly discuss the advantages and limits of this broadly used "in vitro thrombus formation model." The main emphasis is on the description of the most recent developments regarding design of new flow models and new techniques, and how these may advance the landscape of in vitro studies into the formation of physiological or pathophysiological thrombi. Challenges linked to mimicking the formation of a hemostatic plug in a healthy vessel or a thrombus in diseased arteries and the complexity of reproducing the various aspects of venous thrombosis are discussed. Future directions are proposed to improve the physiological or pathophysiological relevance of current flow-based assays.

Computational investigation of blood flow and flow-mediated transport in arterial thrombus neighborhood

A pathologically formed blood clot or thrombus is central to major cardiovascular diseases like heart attack and stroke. Detailed quantitative evaluation of flow and flow-mediated transport processes in the thrombus neighborhood within large artery hemodynamics is crucial for understanding disease progression and assessing treatment efficacy. This, however, remains a challenging task owing to the complexity of pulsatile viscous flow interactions with arbitrary shape and heterogeneous microstructure of realistic thrombi. Here, we address this challenge by conducting a systematic parametric simulation-based study on characterizing unsteady hemodynamics and flow-mediated transport in the neighborhood of an arterial thrombus. We use a hybrid particle-continuum-based finite element approach to handle arbitrary thrombus shape and microstructural variations. Results from a cohort of 50 different unsteady flow scenarios are presented, including unsteady vortical structures, pressure gradient across the thrombus boundary, finite time Lyapunov exponents, and dynamic coherent structures that organize advective transport. We clearly illustrate the combined influence of three key parameters-thrombus shape, microstructure, and extent of wall disease-in terms of: (a) determining hemodynamic features in the thrombus neighborhood and (b) governing the balance between advection, permeation, and diffusion to regulate transport processes in the thrombus neighborhood.

A MATHEMATICAL MODEL OF PLATELET AGGREGATION IN AN EXTRAVASCULAR INJURY UNDER FLOW

We present the first mathematical model of flow-mediated primary hemostasis in an extravascular injury which can track the process from initial deposition to occlusion. The model consists of a system of ordinary differential equations (ODEs) that describe platelet aggregation (adhesion and cohesion), soluble-agonist-dependent platelet activation, and the flow of blood through the injury. The formation of platelet aggregates increases resistance to flow through the injury, which is modeled using the Stokes-Brinkman equations. Data from analogous experimental (microfluidic flow) and partial differential equation models informed parameter values used in the ODE model description of platelet adhesion, cohesion, and activation. This model predicts injury occlusion under a range of flow and platelet activation conditions. Simulations testing the effects of shear and activation rates resulted in delayed occlusion and aggregate heterogeneity. These results validate our hypothesis that flow-mediated dilution of activating chemical adenosine diphosphate hinders aggregate development. This novel modeling framework can be extended to include more mechanisms of platelet activation as well as the addition of the biochemical reactions of coagulation, resulting in a computationally efficient high throughput screening tool of primary and secondary hemostasis.

Biorheology of occlusive thrombi formation under high shear: in vitro growth and shrinkage

Occlusive thrombi formed under high flow shear rates develop very rapidly in arteries and may lead to myocardial infarction or stroke. Rapid platelet accumulation (RPA) and occlusion of platelet-rich thrombi and clot shrinkage have been studied after flow arrest. However, the influence of margination and shear rate on occlusive clot formation is not fully understood yet. In this study, the influence of flow on the growth and shrinkage of a clot is investigated. Whole blood (WB) and platelet-rich plasma (PRP) were perfused at high shear rates (> 3,000 s⁻¹) through two microfluidic systems with a stenotic section under constant pressure. The stenotic section of the two devices are different in stenotic length (1,000 vs 150 μm) and contraction angle of the stenosis (15° vs 80°). In all experiments, the flow chamber occluded in the stenotic section. Besides a significantly increased lag time and decreased RPA rate for PRP compared to WB (p < 0.01), the device with a shorter stenotic section and steeper contraction angle showed a shear-dependent occlusion and lag time for both PRP and WB. This shear-dependent behavior of the platelet aggregate formation might be caused by the stenotic geometry.

Clot Permeability, Agonist Transport, and Platelet Binding Kinetics in Arterial Thrombosis

The formation of wall-adherent platelet aggregates is a critical process in arterial thrombosis. A growing aggregate experiences frictional drag forces exerted on it by fluid moving over or through the aggregate. The magnitude of these forces is strongly influenced by the permeability of the developing aggregate; the permeability depends on the aggregate's porosity. Aggregation is mediated by formation of ensembles of molecular bonds; each bond involves a plasma protein bridging the gap between specific receptors on the surfaces of two different platelets. The ability of the bonds existing at any time to sustain the drag forces on the aggregate determines whether it remains intact or sheds individual platelets or larger fragments (emboli). We investigate platelet aggregation in coronary-sized arteries using both computational simulations and in vitro experiments. The computational model tracks the formation and breaking of bonds between platelets and treats the thrombus as an evolving porous, viscoelastic material, which moves differently from the background fluid. This relative motion generates drag forces which the fluid and thrombus exert on one another. These forces are computed from a permeability-porosity relation parameterized from experimental measurements. Basing this relation on measurements from occlusive thrombi formed in our flow chamber experiments, along with other physiological parameter values, the model produced stable dense thrombi on a similar timescale to the experiments. When we parameterized the permeability-porosity relation using lower permeabilities reported by others, bond formation was insufficient to balance drag forces on an early thrombus and keep it intact. Under high shear flow, soluble agonist released by platelets was limited to the thrombus and a boundary layer downstream, thus restricting thrombus growth into the vessel lumen. Adding to the model binding and activation of unactivated platelets through von Willebrand-factor-mediated processes allowed greater growth and made agonist-induced activation more effective.

Quantifying single-platelet biomechanics: An outsider's guide to biophysical methods and recent advances

Platelets are the key cellular components of blood primarily contributing to formation of stable hemostatic plugs at the site of vascular injury, thus preventing excessive blood loss. On the other hand, excessive platelet activation can contribute to thrombosis. Platelets respond to many stimuli that can be of biochemical, cellular, or physical origin. This drives platelet activation kinetics and plays a vital role in physiological and pathological situations. Currently used bulk assays are inadequate for comprehensive biomechanical assessment of single platelets. Individual platelets interact and respond differentially while modulating their biomechanical behavior depending on dynamic changes that occur in surrounding microenvironments. Quantitative description of such a phenomenon at single-platelet regime and up to nanometer resolution requires methodological approaches that can manipulate individual platelets at submicron scales. This review focusses on principles, specific examples, and limitations of several relevant biophysical methods applied to single-platelet analysis such as micropipette aspiration, atomic force microscopy, scanning ion conductance microscopy and traction force microscopy. Additionally, we are introducing a promising single-cell approach, real-time deformability cytometry, as an emerging biophysical method for high-throughput biomechanical characterization of single platelets. This review serves as an introductory guide for clinician scientists and beginners interested in exploring one or more of the above-mentioned biophysical methods to address outstanding questions in single-platelet biomechanics.

The effect of platelet storage temperature on haemostatic, immune, and endothelial function: potential for personalised medicine

Reports from both adult and paediatric populations indicate that approximately two-thirds of platelet transfusions are used prophylactically to prevent bleeding, while the remaining one-third are used therapeutically to manage active bleeding. These two indications, prophylactic and therapeutic, serve two very distinct purposes and therefore will have two different functional requirements. In addition, disease aetiology in a given patient may require platelets with different functional characteristics. These characteristics can be derived from the various manufacturing methods used in platelet product production, including collection methods, processing methods, and storage options. The iterative combinations of manufacturing methods can result in a number of unique platelet products with different efficacy and safety profiles, which could potentially be used to benefit patient populations by meeting diverse clinical needs. In particular, cold storage of platelet products causes many biochemical and functional changes, of which the most notable characterised to date include increased haemostatic activity and altered expression of molecules inherent to platelet:leucocyte interactions. The in vivo consequences, both short- and long-term, of these molecular and cellular cold-storage-induced changes have yet to be clearly defined. Elucidation of these mechanisms would potentially reveal unique biologies that could be harnessed to provide more targeted therapies. To this end, in this new era of personalised medicine, perhaps there is an opportunity to provide individual patients with platelet products that are tailored to their clinical condition and the specific indication for transfusion.

Platelets as autonomous drones for hemostatic and immune surveillance

Platelets participate in many important physiological processes, including hemostasis and immunity. However, despite their broad participation in these evolutionarily critical roles, the anucleate platelet is uniquely mammalian. In contrast with the large nucleated equivalents in lower vertebrates, we find that the design template for the evolutionary specialization of platelets shares remarkable similarities with human-engineered unmanned aerial vehicles in terms of overall autonomy, maneuverability, and expendability. Here, we review evidence illustrating how platelets are uniquely suited for surveillance and the manner in which they consequently provide various types of support to other cell types.

Reduced model to predict thrombin and fibrin during thrombosis on collagen/tissue factor under venous flow: Roles of γ'-fibrin and factor XIa

During thrombosis, thrombin generates fibrin, however fibrin reversibly binds thrombin with low affinity E-domain sites (K_D = 2.8 μM) and high affinity γ’-fibrin sites (K_D = 0.1 μM). For blood clotting on collagen/tissue factor (1 TF-molecule/μm²) at 200 s^-1 wall shear rate, high μM-levels of intraclot thrombin suggest robust prothrombin penetration into clots. Setting intraclot zymogen concentrations to plasma levels (and neglecting cofactor rate limitations) allowed the linearization of 7 Michaelis-Menton reactions between 6 species to simulate intraclot generation of: Factors FXa (via TF/VIIa or FIXa), FIXa (via TF/FVIIa or FXIa), thrombin, fibrin, and FXIa. This reduced model [7 rates, 2 K_D’s, enzyme half-lives~1 min] predicted the measured clot elution rate of thrombin-antithrombin (TAT) and fragment F1.2 in the presence and absence of the fibrin inhibitor Gly-Pro-Arg-Pro. To predict intraclot fibrin reaching 30 mg/mL by 15 min, the model required fibrinogen penetration into the clot to be strongly diffusion-limited (actual rate/ideal rate = 0.05). The model required free thrombin in the clot (~100 nM) to have an elution half-life of ~2 sec, consistent with measured albumin elution, with most thrombin (>99%) being fibrin-bound. Thrombin-feedback activation of FXIa became prominent and reached 5 pM FXIa at >500 sec in the simulation, consistent with anti-FXIa experiments. In predicting intrathrombus thrombin and fibrin during 15-min microfluidic experiments, the model revealed “cascade amplification” from 30 pM levels of intrinsic tenase to 15 nM prothrombinase to 15 μM thrombin to 90 μM fibrin. Especially useful for multiscale simulation, this reduced model predicts thrombin and fibrin co-regulation during thrombosis under flow.

During blood clotting events, a complex series of reaction are involved. Simulation gives insights to the concentration of different enzymes which are at too low of concentration to be detected. However, the models are often large and difficult to solve for clotting under flow conditions. With a thin film approximation, we were able to simplify clotting under flow with parameters from literature, with only 3 adjusted in order to fit the experimental data. This model gave insights into the dynamics of the species involved, and the roles of γ’-fibrin and thrombin feedback activation. This reduced model may be useful in further multiscale simulations.

Platelet Mechanotransduction

The vasculature is a dynamic environment in which blood platelets constantly survey the endothelium for sites of vessel damage. The formation of a mechanically coherent hemostatic plug to prevent blood loss relies on a coordinated series of ligand-receptor interactions governing the recruitment, activation, and aggregation of platelets. The physical biology of each step is distinct in that the recruitment of platelets depends on the mechanosensing of the platelet receptor glycoprotein Ib for the adhesive protein von Willebrand factor, whereas platelet activation and aggregation are responsive to the mechanical forces sensed at adhesive junctions between platelets and at the platelet-matrix interface. Herein we take a biophysical perspective to discuss the current understanding of platelet mechanotransduction as well as the measurement techniques used to quantify the physical biology of platelets in the context of thrombus formation under flow.

Microclot array elastometry for integrated measurement of thrombus formation and clot biomechanics under fluid shear

Blood clotting at the vascular injury site is a complex process that involves platelet adhesion and clot stiffening/contraction in the milieu of fluid flow. An integrated understanding of the hemodynamics and tissue mechanics regulating this process is currently lacking due to the absence of an experimental system that can simultaneously model clot formation and measure clot mechanics under shear flow. Here we develop a microfluidic-integrated microclot-array-elastometry system (clotMAT) that recapitulates dynamic changes in clot mechanics under physiological shear. Treatments with procoagulants and platelet antagonists and studies with diseased patient plasma demonstrate the ability of the system to assay clot biomechanics associated with common antiplatelet treatments and bleeding disorders. The changes of clot mechanics under biochemical treatments and shear flow demonstrate independent yet equally strong effects of these two stimulants on clot stiffening. This microtissue force sensing system may have future research and diagnostic potential for various bleeding disorders.

Red blood cells modulate structure and dynamics of venous clot formation in sickle cell disease

Sickle cell disease (SCD) is associated with chronic activation of coagulation and an increased risk of venous thromboembolism. Erythrocyte sickling, the primary pathologic event in SCD, results in dramatic morphological changes in red blood cells (RBCs) because of polymerization of the abnormal hemoglobin. We used a mouse model of SCD and blood samples from sickle patients to determine if these changes affect the structure, properties, and dynamics of sickle clot formation. Sickling of RBCs and a significant increase in fibrin deposition were observed in venous thrombi formed in sickle mice. During ex vivo clot contraction, the number of RBCs extruded from sickle whole blood clots was significantly reduced compared with the number released from sickle cell trait and nonsickle clots in both mice and humans. Entrapment of sickled RBCs was largely factor XIIIa-independent and entirely mediated by the platelet-free cellular fraction of sickle blood. Inhibition of phosphatidylserine, but not administration of antisickling compounds, increased the number of RBCs released from sickle clots. Interestingly, whole blood, but not plasma clots from SCD patients, was more resistant to fibrinolysis, indicating that the cellular fraction of blood mediates resistance to tissue plasminogen activator. Sickle trait whole blood clots demonstrated an intermediate phenotype in response to tissue plasminogen activator. RBC exchange in SCD patients had a long-lasting effect on normalizing whole blood clot contraction. Furthermore, RBC exchange transiently reversed resistance of whole blood sickle clots to fibrinolysis, in part by decreasing platelet-derived PAI-1. These properties of sickle clots may explain the increased risk of venous thromboembolism observed in SCD.

Shape changes of erythrocytes during blood clot contraction and the structure of polyhedrocytes

Polyhedral erythrocytes, named polyhedrocytes, are formed in contracted blood clots and thrombi, as a result of compression by activated contractile platelets pulling on fibrin. This deformation was shown to be mechanical in nature and polyhedrocytes were characterized using light and electron microscopy. Through three-dimensional reconstruction, we quantified the geometry of biconcave, intermediate, and polyhedral erythrocytes within contracting blood clots. During compression, erythrocytes became less oblate and more prolate than the biconcave cells and largely corresponded to convex, irregular polyhedra with a total number of faces ranging from 10 to 16. Faces were polygons with 3 to 6 sides. The majority of the faces were quadrilaterals, though not all sides were straight and not all faces were flat. There were no changes in the surface area or volume. These results describe the gradual natural deformation of erythrocytes as a part of compaction into a tightly packed array that is an important but understudied component of mature blood clots and thrombi.

Regulation of Platelet Activation and Coagulation and Its Role in Vascular Injury and Arterial Thrombosis

Hemostasis requires tightly regulated interaction of the coagulation system, platelets, blood cells, and vessel wall components at a site of vascular injury. Dysregulation of this response may result in excessive bleeding if the response is impaired, and pathologic thrombosis with vessel occlusion and tissue ischemia if the response is robust. Studies have elucidated the major molecular signaling pathways responsible for platelet activation and aggregation. Antithrombotic agents targeting these pathways are in clinical use. This review summarizes research examining mechanisms by which these multiple platelet signaling pathways are integrated at a site of vascular injury to produce an optimal hemostatic response.

Phosphatidylserine-exposing blood cells and microparticles induce procoagulant activity in non-valvular atrial fibrillation

BACKGROUND

The definitive role of phosphatidylserine (PS) in the prothrombotic state of non-valvular atrial fibrillation (NVAF) remains unclear. Our objectives were to study the PS exposure on blood cells and microparticles (MPs) in NVAF, and evaluate their procoagulant activity (PCA).

METHODS

NVAF patients without (n = 60) and with left atrial thrombi (n = 18) and controls (n = 36) were included in our study. Exposed PS was analyzed with flow cytometry and confocal microscopy. PCA was evaluated using clotting time, factor Xa (FXa), thrombin and fibrin formation.

RESULTS

PS⁺ blood cells and MPs were significantly higher in NVAF patients without and with left atrial thrombi (both P < 0.01) than in controls. Patients with left atrial thrombi showed increased PS⁺ platelets, neutrophils, erythrocytes and MPs compared with patients without thrombi (all P < 0.05). Moreover, in patients with left atrial thrombi, MPs primarily originated from platelets (56.1%) followed by leukocytes (21.9%, including MPs from neutrophils, monocytes and lymphocytes), erythrocytes (12.2%) and endothelial cells (8.9%). Additionally, PS⁺ blood cells and MPs contributed to markedly shortened coagulation time and dramatically increased FXa/thrombin/fibrin (all P < 0.001) generation in both NVAF groups. Furthermore, blockade of exposed PS on blood cells and MPs with lactadherin inhibited PCA by approximately 80%. Lastly, we found that the amount of PS⁺ platelets and MPs was positively correlated with thrombus diameter (all p < 0.005).

CONCLUSIONS

Our results suggest that exposed PS on blood cells and MPs play a procoagulant role in NVAF patients. Blockade of PS prior to thrombus formation might be a novel therapeutic approach in these patients.

Erythrocyte compression index is impaired in patients with residual vein obstruction

Defective clot contraction has been postulated to contribute to thrombosis. We aimed to evaluate the association of residual vein obstruction (RVO) with erythrocyte compression within the whole-blood clot. We studied 32 patients with venous thromboembolism (VTE) taking vitamin K antagonists (VKAs) for at least 3 months (median time in therapeutic range 60%), including 12 (37.5%) with RVO, and 32 age- and sex-matched controls. In all study participants we evaluated whole blood clot retraction, expressed as the erythrocyte compression index (ECI), defined as a ratio of mean polyhedrocyte area to mean native erythrocyte area, along with clot area covered by polyhedrocytes, plasma clot permeability (Ks), clot lysis time (CLT), and thrombin generation. In both groups higher ECI, indicating impaired clot contraction, increased with older age, higher body mass index, red blood cell distribution width, and lower platelet count (all p < 0.05), but not with red blood cell count. In VTE patients ECI was 15.8% higher than in controls (median 63.6 vs. 54.9%, p = 0.021). Subjects with RVO had 20% higher ECI and 155% lower clot area covered by polyhedrocytes. RVO patients had also prolonged CLT by 41%, but not Ks, and elevated peak thrombin generation by 33%, as compared to those without RVO (all p < 0.05). This study is the first to show impaired compression of erythrocytes in RVO patients despite VKA anticoagulation. Altered ECI coexisted with hypolysability and increased thrombin generation. ECI might be useful in the diagnostic process of RVO or post-thrombotic syndrome and can help optimize the anticoagulant therapy.

Multiscale simulation of thrombus growth and vessel occlusion triggered by collagen/tissue factor using a data-driven model of combinatorial platelet signalling

During clotting under flow, platelets bind and activate on collagen and release autocrinic factors such as ADP and thromboxane, while tissue factor (TF) on the damaged wall leads to localized thrombin generation. Towards patient-specific simulation of thrombosis, a multiscale approach was developed to account for: platelet signalling [neural network (NN) trained by pairwise agonist scanning (PAS), PAS-NN], platelet positions (lattice kinetic Monte Carlo, LKMC), wall-generated thrombin and platelet-released ADP/thromboxane convection–diffusion (partial differential equation, PDE) and flow over a growing clot (lattice Boltzmann). LKMC included shear-driven platelet aggregate restructuring. The PDEs for thrombin, ADP and thromboxane were solved by finite element method using cell activation-driven adaptive triangular meshing. At all times, intracellular calcium was known for each platelet by PAS-NN in response to its unique exposure to local collagen, ADP, thromboxane and thrombin. When compared with microfluidic experiments of human blood clotting on collagen/TF driven by constant pressure drop, the model accurately predicted clot morphology and growth with time. In experiments and simulations at TF at 0.1 and 10 molecule-TF/\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{upgreek} \usepackage{mathrsfs} \setlength{\oddsidemargin}{-69pt} \begin{document} }{}$\mu$\end{document}m\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{upgreek} \usepackage{mathrsfs} \setlength{\oddsidemargin}{-69pt} \begin{document} }{}$^{2}$\end{document} and initial wall shear rate of 200 s\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{upgreek} \usepackage{mathrsfs} \setlength{\oddsidemargin}{-69pt} \begin{document} }{}$^{-1}$\end{document}, the occlusive blockade of flow for a 60-\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{upgreek} \usepackage{mathrsfs} \setlength{\oddsidemargin}{-69pt} \begin{document} }{}$\mu$\end{document}m channel occurred relatively abruptly at 600 and 400 s, respectively (with no occlusion at zero TF). Prior to occlusion, intrathrombus concentrations reached 50 nM thrombin, ~ 1 \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{upgreek} \usepackage{mathrsfs} \setlength{\oddsidemargin}{-69pt} \begin{document} }{}$\mu$\end{document}M thromboxane and ~ 10 \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{upgreek} \usepackage{mathrsfs} \setlength{\oddsidemargin}{-69pt} \begin{document} }{}$\mu$\end{document}M ADP, while the wall shear rate on the rough clot peaked at ~ 1000–2000 s\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{upgreek} \usepackage{mathrsfs} \setlength{\oddsidemargin}{-69pt} \begin{document} }{}$^{-1}$\end{document}. Additionally, clotting on TF/collagen was accurately simulated for modulators of platelet cyclooxygenase-1, P2Y\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{upgreek} \usepackage{mathrsfs} \setlength{\oddsidemargin}{-69pt} \begin{document} }{}$_{1}$\end{document} and IP-receptor. This multiscale approach facilitates patient-specific simulation of thrombosis under hemodynamic and pharmacological conditions.

Biomimetic microgels with controllable deformability improve healing outcomes

Platelets mediate hemostasis by aggregating and binding to fibrin to promote clotting. Over time, platelets contract the fibrin network to induce clot retraction, which contributes to wound healing outcomes by increasing clot stability and improving blood flow to ischemic tissue. In this study, we describe the development of hollow platelet-like particles (PLPs) that mimic the native platelet function of clot retraction in a controlled manner and demonstrate that clot retraction-inducing PLPs promote healing in vivo. PLPs are created by coupling fibrin-binding antibodies to CoreShell (CS) or hollow N-isopropylacrylamide (NIPAm) microgels with varying degrees of shell crosslinking. We demonstrate that hollow microgels with loosely crosslinked shells display a high degree of deformability and mimic activated platelet morphology, while intact CS microgels and hollow microgels with increased crosslinking in the shell do not. When coupled to a fibrin-binding antibody to create PLPs, hollow particles with low degrees of shell crosslinking cause fibrin clot collapse in vitro, recapitulating the clot retraction function of platelets, while other particle types do not. Furthermore, hollow PLPs with low degrees of shell crosslinking improve some wound healing outcomes in vivo.

Model predictions of deformation, embolization and permeability of partially obstructive blood clots under variable shear flow

Thromboembolism, one of the leading causes of morbidity and mortality worldwide, is characterized by formation of obstructive intravascular clots (thrombi) and their mechanical breakage (embolization). A novel two-dimensional multi-phase computational model is introduced that describes active interactions between the main components of the clot, including platelets and fibrin, to study the impact of various physiologically relevant blood shear flow conditions on deformation and embolization of a partially obstructive clot with variable permeability. Simulations provide new insights into mechanisms underlying clot stability and embolization that cannot be studied experimentally at this time. In particular, model simulations, calibrated using experimental intravital imaging of an established arteriolar clot, show that flow-induced changes in size, shape and internal structure of the clot are largely determined by two shear-dependent mechanisms: reversible attachment of platelets to the exterior of the clot and removal of large clot pieces. Model simulations predict that blood clots with higher permeability are more prone to embolization with enhanced disintegration under increasing shear rate. In contrast, less permeable clots are more resistant to rupture due to shear rate-dependent clot stiffening originating from enhanced platelet adhesion and aggregation. These results can be used in future to predict risk of thromboembolism based on the data about composition, permeability and deformability of a clot under specific local haemodynamic conditions.

Platelet packing density is an independent regulator of the hemostatic response to injury

Essentials Platelet packing density in a hemostatic plug limits molecular movement to diffusion. A diffusion-dependent steep thrombin gradient forms radiating outwards from the injury site. Clot retraction affects the steepness of the gradient by increasing platelet packing density. Together, these effects promote hemostatic plug core formation and inhibit unnecessary growth.

SUMMARY

Background Hemostasis studies performed in vivo have shown that hemostatic plugs formed after penetrating injuries are characterized by a core of highly activated, densely packed platelets near the injury site, covered by a shell of less activated and loosely packed platelets. Thrombin production occurs near the injury site, further activating platelets and starting the process of platelet mass retraction. Tightening of interplatelet gaps may then prevent the escape and exchange of solutes. Objectives To reconstruct the hemostatic plug macro- and micro-architecture and examine how platelet mass contraction regulates solute transport and solute concentration in the gaps between platelets. Methods Our approach consisted of three parts. First, platelet aggregates formed in vitro under flow were analyzed using scanning electron microscopy to extract data on porosity and gap size distribution. Second, a three-dimensional (3-D) model was constructed with features matching the platelet aggregates formed in vitro. Finally, the 3-D model was integrated with volume and morphology measurements of hemostatic plugs formed in vivo to determine how solutes move within the platelet plug microenvironment. Results The results show that the hemostatic mass is characterized by extremely narrow gaps, porosity values even smaller than previously estimated and stagnant plasma velocity. Importantly, the concentration of a chemical species released within the platelet mass increases as the gaps between platelets shrink. Conclusions Platelet mass retraction provides a physical mechanism to establish steep chemical concentration gradients that determine the extent of platelet activation and account for the core-and-shell architecture observed in vivo.

Thrombosis in Cerebral Aneurysms and the Computational Modeling Thereof: A Review

Thrombosis is a condition closely related to cerebral aneurysms and controlled thrombosis is the main purpose of endovascular embolization treatment. The mechanisms governing thrombus initiation and evolution in cerebral aneurysms have not been fully elucidated and this presents challenges for interventional planning. Significant effort has been directed towards developing computational methods aimed at streamlining the interventional planning process for unruptured cerebral aneurysm treatment. Included in these methods are computational models of thrombus development following endovascular device placement. The main challenge with developing computational models for thrombosis in disease cases is that there exists a wide body of literature that addresses various aspects of the clotting process, but it may not be obvious what information is of direct consequence for what modeling purpose (e.g., for understanding the effect of endovascular therapies). The aim of this review is to present the information so it will be of benefit to the community attempting to model cerebral aneurysm thrombosis for interventional planning purposes, in a simplified yet appropriate manner. The paper begins by explaining current understanding of physiological coagulation and highlights the documented distinctions between the physiological process and cerebral aneurysm thrombosis. Clinical observations of thrombosis following endovascular device placement are then presented. This is followed by a section detailing the demands placed on computational models developed for interventional planning. Finally, existing computational models of thrombosis are presented. This last section begins with description and discussion of physiological computational clotting models, as they are of immense value in understanding how to construct a general computational model of clotting. This is then followed by a review of computational models of clotting in cerebral aneurysms, specifically. Even though some progress has been made towards computational predictions of thrombosis following device placement in cerebral aneurysms, many gaps still remain. Answering the key questions will require the combined efforts of the clinical, experimental and computational communities.