Oxidized porous silicon particles covalently grafted with daunorubicin as a sustained intraocular drug delivery system

Exosomes-based dual drug-loaded nanocarrier for targeted and multiple proliferative vitreoretinopathy therapy

Proliferative vitreoretinopathy (PVR) is a common cause of vision loss after retinal reattachment surgery and ocular trauma. The key pathogenic mechanisms of PVR development include the proliferation, migration and epithelial-mesenchymal transition (EMT) of retinal pigment epithelial cells (RPEs) activated by the growth factors and cytokines after surgery. Although some drugs have been tried in PVR treatments as basic investigations, the limited efficacy remains an obstacle, which may be due to the single pharmacological action and lack of targeting. Herein, the anti-proliferative Daunorubicin and anti-inflammatory Dexamethasone were co-loaded in the RPEs-derived exosomes (Exos), obtaining an Exos-based dual drug-loaded nanocarrier (Exos@D-D), and used for multiple PVR therapy. Owing to the advantages of homologous Exos and the dual drug loading, Exos@D-D showed good RPEs targeting as well as improved uptake efficiency, and could inhibit the proliferation, migration, as well as EMT of RPEs effectively. The animal studies have also demonstrated that Exos@D-D effectively inhibits the production of proliferative membranes and prevents the further development of inflammation, shows significant therapeutic effects on PVR and good biocompatibility. Such Exos-based dual drug-loaded nanocarrier investigation not only provides a promising approach for multifunctional exosome drug delivery systems construction, but also has great potential in PVR clinical therapy application.

A sustained dual drug delivery system for proliferative vitreoretinopathy

Proliferative vitreoretinopathy (PVR) is a significant threat for vision recovery from retinal detachment or ocular trauma. Currently, no approved pharmacological intervention to prevent PVR. Daunorubicin (DNR) and dexamethasone (DEX) were sequentially loaded into oxidized porous silicon (pSiO₂) particles by covalent conjugation. The DNR + DEX-loaded particles, and control particles loaded with DNR only and DEX only were incubated with RPE-populated collagen for daily gel surface quantitation. Toxicity was monitored by ophthalmic examinations and histological evaluation 21 days after injection. At 3rd week following intravitreal injection, a localized retinal detachment (RD) was created by subretinal injection of Healon in all pretreated eyes in addition to 3 non-interventional control eyes. 10 µg of bromodeoxyuridine (BrdU) was injected into the vitreous 4 h before sacrifice on day 3 after RD induction. Retinal sections were stained for glial fibrillary green protein (GFAP) and BrdU to identify activated glial cells and retinal cell proliferation. The studies demonstrated that all three pSiO₂ particle types were well tolerated in vivo. DNR alone and DNR + DEX combination formulations demonstrated equally strong suppression on gel contraction (least square mean area of the gel: control = 1.71 vs. 30DNR = 1.85 or 30/40Dual = 1.83, p < .05). Eyes pretreated with pSiO₂−DNR + DEX exhibited the least GFAP activation (least square mean intensity mm⁻²: Dual = 4.03, DNR = 7.76, Dex = 16.23, control = 29.11, p < .05) and BrdU expression (Mean number of BrdU positive cells per mm of retina: Dual = 2.77, DNR = 4.58, Dex = 4.01, control = 6.16, p < .05). The synergistic effect of a sustained release pSiO₂−DNR/DEX showed promise for the prevention of PVR development while reducing the necessary therapeutic concentration of each drug.

Bioinspired zwitterionic polyphosphoester modified porous silicon nanoparticles for efficient oral insulin delivery

The intestinal epithelial and mucus barriers on the gastrointestinal tract limit the bioavailability of oral protein or peptide drugs. Therefore, efficient mucus permeability and cellular internalization are required properties for oral delivery systems. To overcome these two obstacles, porous silicon nanoparticles were modified with poly (pyridyl disulfide ethylene phosphate/sulfobetaine) polymers to make P(PyEP-g-SBm)n-AmPSiNPs (m = 0.1, 0.2, 0.3 and n = 10, 20, 30) nanoparticles (NPs). The insulin-loaded P(PyEP-g-SB)-AmPSiNPs showed favorable stability and good biocompatibility in vitro. The zwitterionic dodecyl sulfobetaine (SB) coated nanoparticles improved the mucus permeability. P(PyEP-g-SBm)20 with the optimal conjugated ratio (m = 0.3) of SB units was determined by evaluating the mucus diffusion rate of NPs. The cellular uptake of P(PyEP-g-SB0.3)n-AmPSiNPs (n = 10, 20, 30) was much higher than AmPSiNPs in the presence of inhibitors (N-acetylcysteine solution and sodium chlorate) (p < 0.01) due to the enhanced charge shielding effect of P(PyEP-g-SB) modification. The P(PyEP-g-SB0.3)20-AmPSiNPs showed about 1.4-1.7 fold increase in the apparent permeability of insulin across Caco-2/HT-29-MTX cell monolayers, compared to AmPSiNPs (p < 0.01). Finally, the in vivo study showed that insulin-loaded P(PyEP-g-SB0.3)20-AmPSiNPs generated 20% reduction of the blood glucose level with an 2-fold increase in oral bioavailability. These suggested that zwitterionic polyphosphoester modified porous silicon nanoparticles, which were of enhanced mucus permeability and cellular internalization, represent a promising carrier for oral delivery of peptide and protein.

Intravitreal safety profiles of sol-gel mesoporous silica microparticles and the degradation product (Si(OH)4)

Mesoporous silica has attracted significant attention in the drug delivery area; however, impurities can be a source of toxicity. The current study used commercial microparticles produced at large scale in a well-controlled environment. Micrometer sized mesoporous silica particles were acquired through a commercial vendor and pore structures were characterized by SEM. The three silica particle formulations had a diameter of 15 micrometers and three different pore sizes of 10 nm, 30 nm, and 100 nm. The fourth formulation had particle size of 20–40 micrometers with 50 nm pores. Before in vivo tests, an in vitro cytotoxicity test was conducted with silicic acid, derived from the sol-gel particles, on EA.hy926 cells. Low concentration (2.5 µg/mL) of silicic acid showed no cytotoxicity; however, high concentration (25 µg/mL) was cytotoxic. In vivo intravitreal injection demonstrated that 15 um silica particles with 10 nm pore were safe in both rabbit and guinea pig eyes and the particles lasted in the vitreous for longer than two months. Formulations of with larger pores demonstrated variable localized vitreous cloudiness around the sol-gel particle depot and mild inflammatory cells in the aqueous humor. The incidence of reaction trended higher with larger pores (10 nm: 0%, 30 nm: 29%, 50 nm: 71%, 100 nm: 100%, p < .0001, Cochran Armitage Trend Test). Sol-gel mesoporous silica particles have uniform particle sizes and well-defined pores, which is an advantage for implantation via a fine needle. Selected formulations may be used as an intraocular drug delivery system with proper loading and encapsulation.

Single subconjunctival injection formulation using sol-gel mesoporous silica as a controlled release system for drop-free post-cataract surgery care

PURPOSE

To develop a mesoporous silica drug delivery system and target drop-free care after cataract surgery with a single subconjunctival injection.

SETTING

Laboratory.

DESIGN

Experimental animal study.

METHODS

Ketorolac was infiltration-loaded into sol-gel mesoporous silica particles encapsulated with poly(allylamine hydrochloride) and poly(sodium 4-styrenesulfonate) using a layer-by-layer adsorption technique (SG-Ket-LBL). The formulation was subjected to an in vitro and in vivo drug release study in addition to ocular toxicology evaluation.

RESULTS

Thermogravimetric analysis revealed that the drug loading efficiency was 4.4% for the SG-Ket-LBL particles. The in vivo safety study demonstrated that the formulation was well tolerated after subconjunctival injection and aqueous humor pharmacokinetics showed sustained therapeutic drug release for the targeted time window of 6 to 8 weeks.

CONCLUSIONS

Findings indicated that sol-gel mesoporous silica could be used as a drug carrier for subconjunctival administration. The tested formulation, SG-Ket-LBL, provided therapeutic ketorolac for 6 to 8 weeks, which might be used for a single subconjunctival injection to replace nonsteroidal anti-inflammatory drug eyedrops after cataract surgery.

Harnessing the Aqueous Chemistry of Silicon: Self-Assembling Porous Silicon/Silica Microribbons

The synthesis of microribbons based on the assembly of porous silicon nanoparticles (pSiNPs) in a silica matrix is reported. The formation of these structures is driven by dissolution and reprecipitation of silica derived from the NPs upon drying of an aqueous colloidal dispersion. The process generates composite films that fracture into filaments due to geometric stresses associated with drying of the film on a curved surface. By controlling NP concentration, solvent, and temperature during the evaporation process, well-defined microribbons with a rectangular cross section of ∼25 × 100 microns and lengths on the order of 1 cm are formed. Partial thermal oxidation of the ribbons generates luminescent Si-SiO₂ core-shell composites, and complete oxidation generates porous SiO₂ ribbons with retention of the mesoporous nanostructure. The pores can be infiltrated with daunorubicin as a model drug, and the resulting material shows sustained release of the chemotherapeutic for more than 70 days.

Advanced drug delivery systems and artificial skin grafts for skin wound healing

Cutaneous injuries, especially chronic wounds, burns, and skin wound infection, require painstakingly long-term treatment with an immense financial burden to healthcare systems worldwide. However, clinical management of chronic wounds remains unsatisfactory in many cases. Various strategies including growth factor and gene delivery as well as cell therapy have been used to enhance the healing of non-healing wounds. Drug delivery systems across the nano, micro, and macroscales can extend half-life, improve bioavailability, optimize pharmacokinetics, and decrease dosing frequency of drugs and genes. Replacement of the damaged skin tissue with substitutes comprising cell-laden scaffold can also restore the barrier and regulatory functions of skin at the wound site. This review covers comprehensively the advanced treatment strategies to improve the quality of wound healing.

Porous silicon based intravitreal platform for dual-drug loading and controlled release towards synergistic therapy

The number of blind and low vision persons in the US is projected to increase to 5.68 million by 2020. The eye diseases causing loss of vision are life-long, chronic, and often need protracted presence of therapeutics at the disease site to keep the disease in remission. In addition, multiple pathologies participate in the disease process and a single therapy seems insufficient to bring the disease under control and prevent vision loss. This study demonstrates the use of porous silicon (pSi) particles sequentially loaded with daunorubicin (DNR) and dexamethasone (DEX) to create a synergistic intravitreally injectable dual-drug delivery system. DEX targets chronic inflammation while DNR inhibits excessive cell proliferation as well as suppresses hypoxia-inducible factor 1 to reduce scarring. This pSi-based delivery system releases therapeutic concentrations of DNR for 100 days and DEX for over 165 days after a single dose. This intravitreal dual-drug delivery system is also well tolerated after injection into the rabbit eye model, attested by ocular biomicroscopy, ocular tonometry, electroretinography, and histology. This novel dual-drug delivery system opens an attractive modality for combination therapy to manage refractory chorioretinal diseases and further preclinical studies are warranted to evaluate its efficacy.

Mesoporous Silicon Particles Favor the Induction of Long-Lived Humoral Responses in Mice to a Peptide-Based Vaccine

Vaccinology faces the challenge of developing improved immunization approaches that are able to induce long-term immunity with the desired Th profile according to the pathology. In this context, new vehicles for efficient antigen delivery that exert adjuvant effects play a critical role in addressing this goal. Herein, mesoporous silicon particles (PSiP) were assessed as carriers for a peptide-based vaccine targeting the receptor for advanced glycation end products (RAGE), which is a relevant receptor in Alzheimer´s disease and other diseases. A RAGE peptide was adsorbed onto PSiP (PSiP vaccine) and administered to BALB/c mice, leading to immune responses that were similar in magnitude to those induced by the soluble peptide. However, the response induced by PSiP lasted for a significantly longer period when compared with the behavior of the group immunized with the peptide alone. Therefore, PSiP are proposed as carriers to enhance immune memory, which is critical in vaccination. This study opens interesting perspectives related to the application of PSiP in vaccinology.

Presumed Chemotherapy-Induced Optic Neuropathy and Maculopathy: A Case Report

Purpose:

With the advent of more aggressive cytotoxic chemotherapy regimens, the incidence of ocular toxicity due to these drugs is also on the rise. We report a case of Presumed Chemotherapy-Induced optic neuropathy and maculopathy secondary to treatment with cytarabine and daunorubicin for Acute Myeloid Leukaemia (AML).

Case report:

A 50-year-old man with AML developed sudden decrease in vision in his left eye after three cycles of chemotherapy with cytarabine and daunorubicin. He presented to us six weeks later with bilateral optic atrophy and foveal atrophic changes with early bull’s eye maculopathy. A diagnosis of presumed chemotherapy-induced optic neuropathy with maculopathy was made, and the patient was put on an alternative chemotherapeutic regimen. There was no further decrease in vision on follow up.

Conclusion:

To the best of our knowledge, this is the first report of clinically demonstrable macular toxicity in the form of macular atrophic changes and bull’s eye maculopathy associated with the use of cytarabine and daunorubicin. Early diagnosis and appropriate management of such cases is imperative to prevent further visual deterioration.

Delivery of Flightless I Neutralizing Antibody from Porous Silicon Nanoparticles Improves Wound Healing in Diabetic Mice

Flightless I (Flii) is elevated in human chronic wounds and is a negative regulator of wound repair. Decreasing its activity improves healing responses. Flii neutralizing antibodies (FnAbs) decrease Flii activity in vivo and hold significant promise as healing agents. However, to avoid the need for repeated application in a clinical setting and to protect the therapeutic antibody from the hostile environment of the wound, suitable delivery vehicles are required. In this study, the use of porous silicon nanoparticles (pSi NPs) is demonstrated for the controlled release of FnAb to diabetic wounds. We achieve FnAb loading regimens exceeding 250 µg antibody per mg of vehicle. FnAb-loaded pSi NPs increase keratinocyte proliferation and enhance migration in scratch wound assays. Release studies confirm the functionality of the FnAb in terms of Flii binding. Using a streptozotocin-induced model of diabetic wound healing, a significant improvement in healing is observed for mice treated with FnAb-loaded pSi NPs compared to controls, including FnAb alone. FnAb-loaded pSi NPs treated with proteases show intact and functional antibody for up to 7 d post-treatment, suggesting protection of the antibodies from proteolytic degradation in wound fluid. pSi NPs may therefore enable new therapeutic approaches for the treatment of diabetic ulcers.

Targeted delivery of doxorubicin to tumour tissues by a novel legumain sensitive polygonal nanogel

Targeted delivery of cytotoxic drugs to tumour tissue has great importance for successful chemotherapy. Legumain is an asparaginyl endopeptidase that is highly up-regulated in a number of solid tumours. The aim of this work was to prepare a novel hyaluronic acid (HA) based legumain sensitive nanogel for the delivery of doxorubicin with a high targeting efficiency both in vitro and in vivo. The legumain sensitive property is achieved by the conjugation of doxorubicin with HA via a legumain substrate peptide bridge. This HA derivative is further crosslinked in a water/oil solvent system to form a polygonal nanogel. Doxorubicin released in the tumour tissue is sustained thanks to the combined action of legumain and hyaluronidase, which are both overexpressed in tumour tissues. Hyaluronic acid could act as a targeting agent to CD44 (HA receptor), which further improved the in vivo target effect and enhanced in vitro cellular uptake. The developed nanogel exhibited a high therapeutic index that improved tumour inhibition effects and reduced system toxicity in a lung cancer mice model. These results highlighted the advantages of using this multi-functional material for a successful delivery of doxorubicin against cancer.

"Thunderstruck": Plasma-Polymer-Coated Porous Silicon Microparticles As a Controlled Drug Delivery System

Controlling the release kinetics from a drug carrier is crucial to maintain a drug's therapeutic window. We report the use of biodegradable porous silicon microparticles (pSi MPs) loaded with the anticancer drug camphothecin, followed by a plasma polymer overcoating using a loudspeaker plasma reactor. Homogenous "Teflon-like" coatings were achieved by tumbling the particles by playing AC/DC's song "Thunderstruck". The overcoating resulted in a markedly slower release of the cytotoxic drug, and this effect correlated positively with the plasma polymer coating times, ranging from 2-fold up to more than 100-fold. Ultimately, upon characterizing and verifying pSi MP production, loading, and coating with analytical methods such as time-of-flight secondary ion mass spectrometry, scanning electron microscopy, thermal gravimetry, water contact angle measurements, and fluorescence microscopy, human neuroblastoma cells were challenged with pSi MPs in an in vitro assay, revealing a significant time delay in cell death onset.

Controlled Delivery of Levothyroxine Using Porous Silicon as a Drug Nanocontainer

Porous silicon (pSi) materials are regarded as promising drug delivery vehicles due to their biocompatibility, in vivo degradation, and resorption. We examine pSi films as a platform for the controlled delivery of levothyroxine, as a means to overcome problems with consistent dosage of this drug by oral administration. Oxidized pSi films were modified with 3-(aminopropyl)triethoxysilane (APTES), creating a surface chemistry that increased levothyroxine drug loading capacity by 50 % and sustained drug release under physiological conditions for 14 days. Release kinetics from APTES-functionalized films initially followed a zero-order release profile, which is highly desirable for drug delivery. The loading and release profiles of levothyroxine suggest that the film size required to deliver a therapeutic dose is feasible for further consideration as an implantable delivery system.

A sustained intravitreal drug delivery system with remote real time monitoring capability

Many chorioretinal diseases are chronic and need sustained drug delivery systems to keep therapeutic drug level at the disease site. Many intravitreal drug delivery systems under developing do not have mechanism incorporated for a non-invasive monitoring of drug release. The current study prepared rugate porous silicon (pSi) particles by electrochemical etching with the current frequency (K value) of 2.17 and 2.45. Two model drugs (rapamycin and dexamethasone) and two drug-loading strategies were tested for the feasibility to monitor drug release from the pSi particles through a color fundus camera. The pSi particles (k=2.45) with infiltration loading of rapamycin demonstrated progressively more violet color reflection which was negatively associated with the rapamycin released into the vitreous (r=-0.4, p<0.001, pairwise). In contrast, pSi with K value of 2.17 demonstrated progressive color change toward green and a weak association between rapamycin released into vitreous and green color abundance was identified (r=-0.23, p=0.002, pairwise). Dexamethasone was covalently loaded on to the fully oxidized pSi particles that appeared in vitreous as yellow color and fading over time. The yellow color decrease over time was strongly associated with the dexamethasone detected from the vitreous samples (r=0.7, p<0.0001, pairwise). These results suggest that engineered porous silicon particles may be used as a self-reporting drug delivery system for a non-invasive real time remote monitoring.

STATEMENT OF SIGNIFICANCE

The current study, for the first time, demonstrated proof of concept that engineered porous silicon photonic crystal may deliver therapeutics in a controlled fashion while at the same time might offer a noninvasive remote monitoring of its payload release in a living eye. Porous silicon photonic crystal changes color which is in association with its payload release into vitreous. With further optimization, the color change may be harnessed to inform eye care professionals of real time drug concentration in the eye and allow them to make informed decision to re-dose the patients.

A Novel Approach of Daunorubicin Application on Formation of Proliferative Retinopathy Using a Porous Silicon Controlled Delivery System: Pharmacodynamics

PURPOSE

Proliferative vitreoretinopathy (PVR) is the most common cause of poor visual outcomes in association with retinal detachment surgeries and ocular trauma. Daunorubicin (DNR) has shown the strongest efficacy in proliferation inhibition in vitro. However, clinical studies have shown only mild effect owing to limitations of narrow therapeutic window and short vitreous half-life.

METHODS

Three milligrams of DNR-loaded particles were intravitreally injected into 18 pigmented rabbits, and vitreous samples were collected up to 84 days for analysis. Thirty-seven rabbits were used for a dose-escalation (1, 3, 6 mg) safety and efficacy study in a rabbit PVR model using a pretreatment design.

RESULTS

Loading efficiency of DNR was 108.55 ± 12 μg per 1 mg particles. Eighty-four days of follow-up did not reveal any adverse reaction. Pharmacokinetic analysis demonstrated a vitreous half-life of 29 days with a maximum DNR concentration of 178 ng/mL and a minimum concentration of 29 ng/mL at day 84. Daunorubicin-loaded porous silicon (pSi) particles were dosed 8 to 9 weeks before PVR induction, and PVR severity score was dose dependent (Spearman ρ = -0.25, P = 0.0005). Proliferative vitreoretinopathy with tractional retinal detachment was 88% in the control group, 63% in the low-dose group, 14% in the medium-dose group, and 0% in the high-dose group (Cochran-Armitage Trend Test, Z = 8.99, ρ = -0.67, P < 0.0001).

CONCLUSIONS

Daunorubicin-loaded pSi particles can safely reside in the vitreous for at least 3 months. The pSi-based delivery expanded the therapeutic window of DNR by a factor of 862 and drove down the minimum effective concentration by a factor of 175.

Computational fishing of new DNA methyltransferase inhibitors from natural products

DNA methyltransferase inhibitors (DNMTis) have become an alternative for cancer therapies. However, only two DNMTis have been approved as anticancer drugs, although with some restrictions. Natural products (NPs) are a promising source of drugs. In order to find NPs with novel chemotypes as DNMTis, 47 compounds with known activity against these enzymes were used to build a LDA-based QSAR model for active/inactive molecules (93% accuracy) based on molecular descriptors. This classifier was employed to identify potential DNMTis on 800 NPs from NatProd Collection. 447 selected compounds were docked on two human DNA methyltransferase (DNMT) structures (PDB codes: 3SWR and 2QRV) using AutoDock Vina and Surflex-Dock, prioritizing according to their score values, contact patterns at 4 Å and molecular diversity. Six consensus NPs were identified as virtual hits against DNMTs, including 9,10-dihydro-12-hydroxygambogic, phloridzin, 2',4'-dihydroxychalcone 4'-glucoside, daunorubicin, pyrromycin and centaurein. This method is an innovative computational strategy for identifying DNMTis, useful in the identification of potent and selective anticancer drugs.

Surface engineering of porous silicon microparticles for intravitreal sustained delivery of rapamycin

PURPOSE

To understand the relationship between rapamycin loading/release and surface chemistries of porous silicon (pSi) to optimize pSi-based intravitreal delivery system.

METHODS

Three types of surface chemical modifications were studied: (1) pSi-COOH, containing 10-carbon aliphatic chains with terminal carboxyl groups grafted via hydrosilylation of undecylenic acid; (2) pSi-C12, containing 12-carbon aliphatic chains grafted via hydrosilylation of 1-dodecene; and (3) pSiO2-C8, prepared by mild oxidation of the pSi particles followed by grafting of 8-hydrocarbon chains to the resulting porous silica surface via a silanization.

RESULTS

The efficiency of rapamycin loading follows the order (micrograms of drug/milligrams of carrier): pSiO2-C8 (105 ± 18) > pSi-COOH (68 ± 8) > pSi-C12 (36 ± 6). Powder X-ray diffraction data showed that loaded rapamycin was amorphous and dynamic drug-release study showed that the availability of the free drug was increased by 6-fold (compared with crystalline rapamycin) by using pSiO2-C8 formulation (P = 0.0039). Of the three formulations in this study, pSiO2-C8-RAP showed optimal performance in terms of simultaneous release of the active drug and carrier degradation, and drug-loading capacity. Released rapamycin was confirmed with the fingerprints of the mass spectrometry and biologically functional as the control of commercial crystalline rapamycin. Single intravitreal injections of 2.9 ± 0.37 mg pSiO2-C8-RAP into rabbit eyes resulted in more than 8 weeks of residence in the vitreous while maintaining clear optical media and normal histology of the retina in comparison to the controls.

CONCLUSIONS

Porous silicon-based rapamycin delivery system using the pSiO2-C8 formulation demonstrated good ocular compatibility and may provide sustained drug release for retina.

Surface engineering of porous silicon to optimise therapeutic antibody loading and release

Infliximab antibodies released from porous silicon microparticles can sequester the proinflammatory cytokine, tumor necrosis factor-α (TNF-α), which is elevated in uveitis and non-healing chronic wounds.

Micelle formulation of hexadecyloxypropyl-cidofovir (HDP-CDV) as an intravitreal long-lasting delivery system

There still is an unmet need for a safe and sustained intravitreal drug delivery system. In this study we are proposing and characterizing a micelle based, clear-media intravitreal drug delivery system using the lipid derivatized nucleoside analog, hexadecyloxypropyl-cidofovir (HDP-CDV, CMX 001). HDP-CDV forms micelles in water and in vitreous supernatant with the critical micelle concentration of 19 μg/mL and 9 μg/mL, respectively at 37 °C. The formed micelles had the average size of 274.7 nm and the Zeta potential of -47.1 mV. Drug release study in the excised rabbit vitreous showed a sustained release profile with a half-life of 2.7 days. The micelle formulation of HDP-CDV demonstrated a good safety profile in two animal species (rabbit and guinea pig) following intravitreal injection. The sustained efficacy was tested in a pretreatment study design and the drug potency was tested in an ongoing herpes simplex virus (HSV-1) retinitis model. The pretreatment studies using single intravitreal injection and later HSV-1 infection revealed at least 9 weeks of vitreous presence and therapeutic level of HDP-CDV, with 71% eyes protection from infection. The treatment study demonstrated that intravitreal administration halted active HSV-1 retinitis in 80% of the infected eyes while cidofovir (CDV) treatment failed to suppress active HSV-1 retinitis. In summary, lipid derivatized nucleoside analogs can be formulated as a micelle intravitreal injection and provides a sustained drug release in vitreous for chronic retinal diseases.

Intravitreal controlled release of dexamethasone from engineered microparticles of porous silicon dioxide

Dexamethasone is a glucocorticoid that is widely used in the ophthalmic arena. The recent FDA approved dexamethasone implant can provide a three month efficacy but with high rate of drug related cataract and high intraocular pressure (IOP). It seems that higher steroid in aqueous humor and around lens may be associated with these complications based on clinical fact that higher IOP was observed with intravitreal triamcinolone acetonide (TA) than with subtenon TA. We hypothesize that placing a sustained dexamethasone release system near back of the eye through a fine needle can maximize efficacy while mitigate higher rate of IOP rise and cataract. To develop a sustained intravitreal dexamethasone delivery system, porous silicon dioxide (pSiO2) microparticles were fabricated and functionalized with amines as well as carboxyl groups. Dexamethasone was conjugated to pSiO2 through the Steglich Esterification Reaction between hydroxyl of dexamethasone and carboxyl groups on the pSiO2. The drug loading was confirmed by Fourier transform infrared spectroscopy (FTIR) and loading efficiency was quantitated using thermogravimetric analysis (TGA). In vitro release was conducted for three months and dexamethasone was confirmed in the released samples using liquid chromatography-tandem mass spectrometry (LC/MS/MS). A pilot ocular safety and determination of vitreous drug level was performed in rabbit eyes. The drug loading study demonstrated that loading efficiency was from 5.96% to 10.77% depending on the loading reaction time, being higher with longer loading reaction time before reaching saturation around 7 days. In vitro drug release study revealed that dexamethasone release from pSiO2 particles was sustainable for over 90 days and was 80 days longer than free dexamethasone or infiltration-loaded pSiO2 particle formulation in the same setting. Pilot in vivo study demonstrated no sign of ocular adverse reaction in rabbit eyes following a single 3 mg intravitreal injection and free drug level at 2-week was 107.23 ± 10.54 ng/mL that is well above the therapeutic level but only around 20% level of dexamethasone released from OZURDEX(®) (dexamethasone intravitreal implant) in a rabbit eye model. In conclusion, dexamethasone is able to covalently load to the pSiO2 particles and provide sustained drug release for at least 3 months in vitro. Intravitreal injection of these particles were well tolerated in rabbit eyes and free drug level in vitreous at 2-week was well above the therapeutic level.

pH-responsive drug delivery system based on hollow silicon dioxide micropillars coated with polyelectrolyte multilayers

We report on the fabrication of polyelectrolyte multilayer-coated hollow silicon dioxide micropillars as pH-responsive drug delivery systems. Silicon dioxide micropillars are based on macroporous silicon formed by electrochemical etching. Due to their hollow core capable of being loaded with chemically active agents, silicon dioxide micropillars provide additional function such as drug delivery system. The polyelectrolyte multilayer was assembled by the layer-by-layer technique based on the alternative deposition of cationic and anionic polyelectrolytes. The polyelectrolyte pair poly(allylamine hydrochloride) and sodium poly(styrene sulfonate) exhibited pH-responsive properties for the loading and release of a positively charged drug doxorubicin. The drug release rate was observed to be higher at pH 5.2 compared to that at pH 7.4. Furthermore, we assessed the effect of the number of polyelectrolyte bilayers on the drug release loading and release rate. Thus, this hybrid composite could be potentially applicable as a pH-controlled system for localized drug release.

Porous silicon oxide-PLGA composite microspheres for sustained ocular delivery of daunorubicin

A water-soluble anthracycline antibiotic drug (daunorubicin, DNR) was loaded into oxidized porous silicon (pSiO2) microparticles and then encapsulated with a layer of polymer (poly lactide-co-glycolide, PLGA) to investigate their synergistic effects in control of DNR release. Similarly fabricated PLGA-DNR microspheres without pSiO2, and pSiO2 microparticles without PLGA were used as control particles. The composite microparticles synthesized by a solid-in-oil-in-water emulsion method have mean diameters of 52.33±16.37μm for PLGA-pSiO2_21/40-DNR and the mean diameter of 49.31±8.87μm for PLGA-pSiO2_6/20-DNR. The mean size, 26.00±8μm, of PLGA-DNR was significantly smaller, compared with the other two (P<0.0001). Optical microscopy revealed that PLGA-pSiO2-DNR microspheres contained multiple pSiO2 particles. In vitro release experiments determined that control PLGA-DNR microspheres completely released DNR within 38days and control pSiO2-DNR microparticles (with no PLGA coating) released DNR within 14days, while the PLGA-pSiO2-DNR microspheres released DNR for 74days. Temporal release profiles of DNR from PLGA-pSiO2 composite particles indicated that both PLGA and pSiO2 contribute to the sustained release of the payload. The PLGA-pSiO2 composite displayed a more constant rate of DNR release than the pSiO2 control formulation, and displayed a significantly slower release of DNR than either the PLGA or pSiO2 formulations. We conclude that this system may be useful in managing unwanted ocular proliferation when formulated with antiproliferation compounds such as DNR.

Nanostructured porous silicon-mediated drug delivery

INTRODUCTION

The particular properties of nanostructured porous silicon (nanoPS) make it an attractive material for controlled and localized release of therapeutics within the body, aiming at increased efficacy and reduced risks of potential side effects. Since this is a rapidly evolving field as a consequence of the number of research groups involved, a critical review of the state of the art is necessary.

AREAS COVERED

In this work, the most promising and successful applications of nanoPS in the field of drug delivery are reviewed and discussed. Two key issues such as drug loading and release are also analyzed in detail. The development of multifunctional (hybrid) systems, aiming at imparting additional functionalities to the nanoPS particles such as luminescence, magnetic response and/or plasmonic effects (allowing simultaneous tracking and guiding), is also examined.

EXPERT OPINION

Nanostructured materials based on silicon are promising platforms for pharmaceutical applications given their ability to degrade and low toxicity. However, a very limited number of clinical applications have been demonstrated so far.

Cefazolin-loaded mesoporous silicon microparticles show sustained bactericidal effect against Staphylococcus aureus

Cefazolin is an antibiotic frequently used in preoperative prophylaxis of orthopedic surgery and to fight secondary infections post-operatively. Although its systemic delivery in a bulk or bolus dose is usually effective, the local and controlled release can increase its effectiveness by lowering dosages, minimizing total drug exposure, abating the development of antibiotic resistance and avoiding the cytotoxic effect. A delivery system based on mesoporous silicon microparticles was developed that is capable of efficiently loading and continuously releasing cefazolin over several days. The in vitro release kinetics from mesoporous silicon microparticles with three different nanopore sizes was evaluated, and minimal inhibitory concentration of cefazolin necessary to eliminate a culture of Staphylococcus aureus was identified to be 250 µg/mL. A milder toxicity toward mesenchymal stem cells was observed from mesoporous silicon microparticles over a 7-day period. Medium pore size-loaded mesoporous silicon microparticles exhibited long-lasting bactericidal properties in a zone inhibition assay while they were able to kill all the bacteria growing in suspension cultures within 24 h. This study demonstrates that the sustained release of cefazolin from mesoporous silicon microparticles provides immediate and long-term control over bacterial growth both in suspension and adhesion while causing minimal toxicity to a population of mesenchymal stem cell. Mesoporous silicon microparticles offer significant advantageous properties for drug delivery applications in tissue engineering as it favorably extends drug bioavailability and stability, while reducing concomitant cytotoxicity to the surrounding tissues.

Oxidation-Induced Trapping of Drugs in Porous Silicon Microparticles

An approach for the preparation of an oxidized porous silicon microparticle drug delivery system that can provide efficient trapping and sustained release of various drugs is reported. The method uses the contraction of porous silicon's mesopores, which occurs during oxidation of the silicon matrix, to increase the loading and retention of drugs within the particles. First, a porous Si (pSi) film is prepared by electrochemical etching of p-type silicon with a resistivity of >0.65 Ω cm in a 1:1 (v/v) HF/ethanol electrolyte solution. Under these conditions, the pore walls are sufficiently thin to allow for complete oxidation of the silicon skeleton under mild conditions. The pSi film is then soaked in an aqueous solution containing the drug (cobinamide or rhodamine B test molecules were used in this study) and sodium nitrite. Oxidation of the porous host by nitrite results in a shrinking of the pore openings, which physically traps the drug in the porous matrix. The film is subsequently fractured by ultrasonication into microparticles. Upon comparison with commonly used oxidizing agents for pSi such as water, peroxide, and dimethyl sulfoxide, nitrite is kinetically and thermodynamically sufficient to oxidize the pore walls of the pSi matrix, precluding reductive (by Si) or oxidative (by nitrite) degradation of the drug payload. The drug loading efficiency is significantly increased (by up to 10-fold), and the release rate is significantly prolonged (by 20-fold) relative to control samples in which the drug is loaded by infiltration of pSi particles postoxidation. We find that it is important that the silicon skeleton be completely oxidized to ensure the drug is not reduced or degraded by contact with elemental silicon during the particle dissolution-drug release phase.

A polymeric device for controlled transscleral multi-drug delivery to the posterior segment of the eye

The design of drug delivery systems that can deliver multiple drugs to the posterior segment of the eye is a challenging task in retinal disease treatments. We report a polymeric device for multi-drug transscleral delivery at independently controlled release rates. The device comprises a microfabricated reservoir, controlled-release cover and three different fluorescent formulations, which were made of photopolymeized tri(ethyleneglycol)dimethacrylate (TEGDM) and poly(ethyleneglycol)dimethacrylate (PEGDM). The release rate of each fluorescent is controlled by varying the PEGDM/TEGDM ratio in its formulation and the cover. The release kinetics appeared to be related to the swelling ratio of the PEGDM/TEGDM polymers. When the devices were implanted onto rat sclerae, fluorescence was observable in the ocular tissues during 4 weeks' implantation and distributed locally around the implantation site. Our polymeric system, which can administer multiple compounds with distinct kinetics, provides prolonged action and less invasive transscleral administration, and is expected to provide new tools for the treatment of posterior eye diseases with new therapeutic modalities.

Tunable sustained intravitreal drug delivery system for daunorubicin using oxidized porous silicon

Daunorubicin (DNR) is an effective inhibitor of an array of proteins involved in neovascularization, including VEGF and PDGF. These growth factors are directly related to retina scar formation in many devastating retinal diseases. Due to the short vitreous half-life and narrow therapeutic window, ocular application of DNR is limited. It has been shown that a porous silicon (pSi) based delivery system can extend DNR vitreous residence from a few days to 3months. In this study we investigated the feasibility of altering the pore size of the silicon particles to regulate the payload release. Modulation of the etching parameters allowed control of the nano-pore size from 15nm to 95nm. In vitro studies showed that degradation of pSiO2 increased with increasing pore size and the degradation of pSiO2 was approximately constant for a given particle type. The degradation of pSiO2 with 43nm pores was significantly greater than the other two particles with smaller pores, judged by observed and normalized mean Si concentration of the dissolution samples (44.2±8.9 vs 25.7±5.6 or 21.2±4.2μg/mL, p<0.0001). In vitro dynamic DNR release revealed that pSiO2-CO2H:DNR (porous silicon dioxide with covalent loading of daunorubicin) with large pores (43nm) yielded a significantly higher DNR level than particles with 15 or 26nm pores (13.5±6.9ng/mL vs. 2.3±1.6ng/mL and 1.1±0.9ng/mL, p<0.0001). After two months of in vitro dynamic release, 54% of the pSiO2-CO2H:DNR particles still remained in the dissolution chamber by weight. In vivo drug release study demonstrated that free DNR in the vitreous at post-injection day 14 was 66.52ng/mL for 95nm pore size pSiO2-CO2H:DNR, 10.76ng/mL for 43nm pSiO2-CO2H:DNR, and only 1.05ng/mL for 15nm pSiO2-CO2H:DNR. Pore expansion from 15nm to 95nm led to a 63 fold increase of DNR release (p<0.0001) and a direct correlation between the pore size and the drug levels in the living eye vitreous was confirmed. The present study demonstrates the feasibility of regulating DNR release from pSiO2 covalently loaded with DNR by engineering the nano-pore size of pSi.

Drug-releasing implants: current progress, challenges and perspectives

This review presents the different types and concepts of drug-releasing implants using new nanomaterials and nanotechnology-based devices.

Sustained delivery of a HIF-1 antagonist for ocular neovascularization

Doxorubicin (DXR) and daunorubicin (DNR) inhibit hypoxia-inducible factor-1 (HIF-1) transcriptional activity by blocking its binding to DNA. Intraocular injections of DXR or DNR suppressed choroidal and retinal neovascularization (NV), but also perturbed retinal function as demonstrated by electroretinograms (ERGs). DXR was conjugated to novel copolymers of branched polyethylene glycol and poly(sebacic acid) (DXR-PSA-PEG3) and formulated into nanoparticles that when placed in aqueous buffer, slowly released small DXR-conjugates. Intraocular injection of DXR-PSA-PEG3 nanoparticles (1 or 10 μg DXR content) reduced HIF-1-responsive gene products, strongly suppressed choroidal and retinal NV, and did not cause retinal toxicity. In transgenic mice that express VEGF in photoreceptors, intraocular injection of DXR-PSA-PEG3 nanoparticles (10 μg DXR content) suppressed NV for at least 35 days. Intraocular injection of DXR-PSA-PEG3 nanoparticles (2.7 mg DXR content) in rabbits resulted in sustained DXR-conjugate release with detectable levels in aqueous humor and vitreous for at least 105 days. This study demonstrates a novel HIF-1-inhibitor-polymer conjugate formulated into controlled-release particles that maximizes efficacy and duration of activity, minimizes toxicity, and provides a promising new chemical entity for treatment of ocular NV.

Ocular silicon distribution and clearance following intravitreal injection of porous silicon microparticles

Porous silicon (pSi) microparticles have been investigated for intravitreal drug delivery and demonstrated good biocompatibility. With the appropriate surface chemistry, pSi can reside in vitreous for months or longer. However, ocular distribution and clearance pathway of its degradation product, silicic acid, are not well understood. In the current study, rabbit ocular tissue was collected at different time point following fresh pSi (day 1, 5, 9, 16, and 21) or oxidized pSi (day 3, 7, 14, 21, and 35) intravitreal injection. In addition, dual-probe simultaneous microdialysis of aqueous and vitreous humor was performed following a bolus intravitreal injection of 0.25 mL silicic acid (150 μg/mL) and six consecutive microdialysates were collected every 20 min. Silicon was quantified from the samples using inductively coupled plasma-optical emission spectroscopy. The study showed that following the intravitreal injection of oxidized pSi, free silicon was consistently higher in the aqueous than in the retina (8.1 ± 6.5 vs. 3.4 ± 3.9 μg/mL, p = 0.0031). The area under the concentration-time curve (AUC) of the retina was only about 24% that of the aqueous. The mean residence time was 16 days for aqueous, 13 days for vitreous, 6 days for retina, and 18 days for plasma. Similarly, following intravitreal fresh pSi, free silicon was also found higher in aqueous than in retina (7 ± 4.7 vs. 3.4 ± 4.1 μg/mL, p = 0.014). The AUC for the retina was about 50% of the AUC for the aqueous. The microdialysis revealed the terminal half-life of free silicon in the aqueous was 30 min and 92 min in the vitreous; the AUC for aqueous accounted for 38% of the AUC for vitreous. Our studies indicate that aqueous humor is a significant pathway for silicon egress from the eye following intravitreal injection of pSi crystals.

Porous silicon advances in drug delivery and immunotherapy

Biomedical applications of porous silicon include drug delivery, imaging, diagnostics and immunotherapy. This review summarizes new silicon particle fabrication techniques, dynamics of cellular transport, advances in the multistage vector approach to drug delivery, and the use of porous silicon as immune adjuvants. Recent findings support superior therapeutic efficacy of the multistage vector approach over single particle drug delivery systems in mouse models of ovarian and breast cancer. With respect to vaccine development, multivalent presentation of pathogen-associated molecular patterns on the particle surface creates powerful platforms for immunotherapy, with the porous matrix able to carry both antigens and immune modulators.