Current approaches to produce durable biomaterials: Trends in polymeric materials for restorative dentistry applications

Dental caries continues to be a public health issue, especially more evident in underserved populations throughout the U.S. Unfortunately, especially with an aging population, hundreds of thousands of resin composite restorations are replaced each year due to recurring decay and fracture. According to several cohort studies, the average life span of this type of restoration is 10 years or less, depending on the caries risk level of the patient and the complexity of the restorative procedure. Any new material development must depart from the simple restoration of form paradigm, in which the filling is simply inert/biocompatible. This review will discuss novel antibiofilm structures, based on a targeted approach specifically against dysbiotic bacteria. Biofilm coalescence can be prevented by using glycosyl transferase - GTF inhibitors, in a non-bactericidal approach. On the tooth substrate side, MMP-inhibiting molecules can improve the stability of the collagen in the hybrid layer. This review will also discuss the importance of testing the materials in a physiologically relevant environment, mimicking the conditions in the mouth in terms of mechanical loading, bacterial challenge, and the presence of saliva. Ultimately, the goal of materials development is to achieve durable restorations, capable of adapting to the oral environment and resisting challenges that go beyond mechanical demands. That way, we can prevent the unnecessary loss of additional tooth structure that comes with every re-treatment. CLINICAL SIGNIFICANCE: While proper restorative technique and patient education in terms of diet and oral hygiene are crucial factors in increasing the longevity of esthetic direct restorations, materials better able to resist and interact with the conditions of the oral environment are still needed. Reproducing the success of dental amalgams with esthetic materials continues to be the Holy Grail of materials development.

Development of nanobiosilicate, tricalcium phosphate and chlorhexidine materials for biomineralization with crystallographic similarity to hydroxyapatite and biomodified collagen

OBJECTIVES

The aim of this work is to test experimental cements, doped with a silicate based bioactive nanoparticle (NanoBiosilicate). Methods, we synthesized a glass nanoparticle by Sol-Gel Stöber method, used to be incorporated in a dental material for endodontic uses.

MATERIALS AND METHODS

We assess the mineralizing properties and biocompatibility. Besides the crystallography characterization of the resultant new crystals. Results, After analysis, and comparison with commercial materials, the material tested was similar in mechanical properties required by ISO, The ion release was effective after 2 hr. of setting and the novel material was cell compatible accepted by ISO.

RESULTS

We found new formed Calcium Phosphate peaks in the spectroscopic analysis (FTIR), remarkably the crystals formed were comparable to hydroxyapatite when analyzed with a Selected Area Electron Diffractometer, with rings of 2.84 Å for 002, and the 2.77 Å is also visible for 210. The 6.83 Å and 6.88 Å, for respective 222 and 004. The incorporation of Chlorhexidine was not detrimental for this property, Significance, the features mentioned represented a progress in biomineralization field that was associated to an improved mineral structure formation with increased crystallographic similarity to natural hydroxyapatite. When chlorhexidine was added a favorable biomodification of the remaining collagen in dentinal walls and antimicrobial activity potential were also observed.

Effect of the use of bromelain associated with bioactive glass-ceramic on dentin/adhesive interface

OBJECTIVES

To evaluate the effect of bromelain associated with Biosilicate on the bond strength (BS) of a universal adhesive system to sound (SD) and caries-affected dentin (CAD), and on the proteolytic activity.

MATERIALS AND METHODS

Cavities were prepared in 360 molars, half submitted to cariogenic challenge. Teeth were separated into groups (n=20): Control-No treatment; CHX-0.12% chlorhexidine; NaOCl-5% sodium hypochlorite; Br5%-5% bromelain; Br10%-10% bromelain; Bio-10% Biosilicate; NaOClBio-NaOCl+Bio; Br5%Bio-Br5%+Bio; Br10%Bio-Br10%+Bio. Following treatments, the adhesive system was applied, and cavities were restored. Samples were sectioned into sticks and stored at 37 °C for 24 h, 6 months, and 1 year. Microtensile BS (2-way ANOVA, Bonferroni's test, α=0.05), fracture patterns (SEM), and adhesive interfaces (TEM) were evaluated. Bacterial collagenase assay and in situ zymography were performed.

RESULTS

In CAD, Br10% presented higher BS (p=0.0208) than Br5%Bio. Br5% presented higher BS (p=0.0033) after 6 months than after 24 h; and association of treatments, higher BS (p<0.05) after aging than after 24 h. Mixed fractures were the most prevalent. Association of treatments promoted a more uniform hybrid layer with embedded Bio particles. Experimental groups presented lower (p<0.0001) relative fluorescence units than Control. Bromelain, associated or not with Bio, showed collagenolytic degradation.

CONCLUSIONS

Bromelain associated with Biosilicate did not affect the BS to SD. In CAD, Br5%Bio decreased immediate BS but had no long-term influence. This association decreased the proteolytic activity.

CLINICAL RELEVANCE

Bromelain and Biosilicate may enhance the longevity of adhesive restorations by inhibiting endogenous proteases.

Comparative evaluation of effect of chlorhexidine application on dentin bond strength with two different adhesives after ER, CR: YSGG phototherapy: an in vitro study

This study aimed to assess the efficacy of phototherapy with an Er, Cr:YSGG laser on the bond strength of dentin using two different adhesive systems after chlorhexidine (CHX) application. Twenty-four non-carious human molar teeth were separated into three main groups: negative control Group A (Group A), CHX and phototherapy with an Er, Cr:YSGG laser (Group PC), and CHX with conventional diamond bur (no phototherapy) (Group C). These groups were divided into two subgroups based on adhesives: Clearfil Universal Quick Bond and Clearfil SE Bond. To evaluate the microtensile bond strength, the occlusal enamel surfaces of the teeth were removed with a low-speed, water-cooled diamond bur to expose hard dentin tissue. The teeth within Group PC were treated with Er, Cr:YSGG phototherapy. The surfaces were then disinfected with 0.2% chlorhexidine gluconate. Subgroups were applied according to the manufacturer's instructions using the adhesive systems mentioned above. Following adhesive application, the teeth were restored with composite resin. A microtensile bond strength test was performed on the test sticks obtained from the teeth using a universal test device. Data were analyzed using variance analysis (ANOVA) at a significance level of p < 0.05. Among all groups, the highest bond strength was achieved with Clearfil SE Bond with CHX + phototherapy (45.6 ± 4.2), while the lowest was achieved with Clearfil Universal Quick Bond without phototherapy (control group) (27.0 ± 6.7) (p < 0.05). Phototherapy with Er, Cr: YSGG following chlorhexidine application enhanced the bond strength of both the bond systems (p < 0.05).

Er:YAG Laser Physical Etching and Ultra-High-Molecular-Weight Cross-Linked Sodium Polyacrylate Chemical Etching for a Reliable Dentin Dry Bonding

Dentin bond interface stability is the key issue of dental adhesion in present clinical dentistry. The concept of selective extrafibrillar demineralization has opened a new way to maintain intrafibrillar minerals to prevent interface degradation. Here, using ultra-high-molecular-weight sodium polyacrylate [Carbopol (Carbo) > 40 kDa] as a calcium chelator, we challenge this concept and propose a protocol for reliable dentin dry bonding. The results of high-resolution transmission electron microscopy revealed periodic bands of 67 nm dentin collagen fibrils after Carbo etching, and the hydroxyproline concentration increasing with prolonged chelating time denied the concept of extrafibrillar demineralization. The results that wet and dry bonding with Carbo-based demineralization produced a weaker bond strength than the traditional phosphoric acid wet adhesion suggested that the Carbo-based demineralization is an unreliable adhesion strategy. A novel protocol of Er:YAG laser physical etching followed by Carbo chemical etching for dentin adhesion revealed that a micro-/nano-level rough, rigid, and non-collagen exposed dentin surface was produced, the micro-tensile bond strength was maintained after aging under dry and wet bonding modes, and in situ zymography and nanoleakage within the hybrid layers presented lower signals after aging. Cell culture in vitro and a rabbit deep dentin adhesion model in vivo proved that this protocol is safe and biocompatible. Taken together, the concept of extrafibrillar demineralization is limited and insufficient to use in the clinic. The strategy of Er:YAG laser physical etching followed by Carbo chemical etching for dentin adhesion produces a bonding effect with reliability, durability, and safety.

Cathepsins in oral diseases: mechanisms and therapeutic implications

Cathepsins are a type of lysosomal globulin hydrolase and are crucial for many physiological processes, including the resorption of bone matrix, innate immunity, apoptosis, proliferation, metastasis, autophagy, and angiogenesis. Findings regarding their functions in human physiological processes and disorders have drawn extensive attention. In this review, we will focus on the relationship between cathepsins and oral diseases. We highlight the structural and functional properties of cathepsins related to oral diseases, as well as the regulatory mechanisms in tissue and cells and their therapeutic uses. Elucidating the associated mechanism between cathepsins and oral diseases is thought to be a promising strategy for the treatment of oral diseases and may be a starting point for further studies at the molecular level.

Dental Fiber-Post Systems: An In-Depth Review of Their Evolution, Current Practice and Future Directions

The field of dental medicine is constantly evolving and advancing toward minimally invasive techniques. Several studies have demonstrated that bonding to the tooth structure, particularly enamel, yields the most predictable results. In some instances, however, significant tooth loss, pulpal necrosis, or irreversible pulpitis may limit the options available to the restorative dentist. In these cases, placement of a post and core followed by a crown is the preferred treatment option, provided all requirements are met. This literature review provides an overview of the historical development of dental FRC post systems as well as a comprehensive examination of the currently available posts and their bonding requirements. In addition, it offers valuable insights for dental professionals seeking to understand the current state of the field and the prospects of dental FRC post systems.

In situ detection of endogenous proteolytic activity and the effect of inhibitors on tooth root surface

OBJECTIVES

The aim of this study was to clarify the distribution and activity of proteolytic enzymes and examine the inhibitory effects of various substances on this proteolytic activity on tooth root surfaces in situ.

METHODS

Disk-shaped bovine tooth root samples were partly pretreated in acid solution (50 mM lactic acid buffer, pH 4.0) for 48 h. The fluorescence intensity of samples was detected with fluorescent substrate solution for collagenase and gelatinase using a stereoscopic fluorescence microscope for 60 min. The acid-pretreated and non-acid-pretreated root samples were treated with chlorhexidine (CHX), sodium fluoride (NaF), epigallocatechin gallate (EGCG), and calcium hydroxide (Ca(OH)₂) for 10 min, and silver diamine fluoride (SDF) for 10, 30, and 60 s. These samples were immersed in the fluorescence substrate solution at pH 7.0, and the fluorescence intensity of samples was detected. The fluorescence intensity was calculated using analysis software.

RESULTS

Gelatinase activity was detected in root samples. Gelatinase activity of the acid-pretreated side was significantly higher than that of the non-acid-pretreated side (1.63 times) at 60 min. CHX, EGCG, Ca(OH)₂, and SDF decreased the gelatinase activity of root samples, while NaF had no effect.

CONCLUSIONS

Gelatinase activity was detected from the root in situ and it was increased by acid-pretreatment. CHX, EGCG, Ca(OH)₂, and SDF inhibited gelatinase activity.

CLINICAL SIGNIFICANCE

Substances that inhibit proteolytic activity found in this research method will be useful for root caries prevention.

Effects of protease inhibitors on dentin erosion: an in situ study

OBJECTIVE

This in situ study aimed to evaluate the effects of the inhibitors of matrix metalloproteinases (MMPs) and cysteine cathepsins on dentin erosion.

MATERIALS AND METHODS

Ten volunteers participated in this study. Each volunteer wore an intraoral appliance containing 4 dentin specimens subjected to different treatments: deionized water as a control, 1 mM 1,10-phenanthroline (an MMP inhibitor), 50 µM E-64 (a cysteine cathepsin inhibitor), and 1 mM 1,10-phenanthroline + 50 µM E-64. The specimens were dipped in 5 ml of the respective solutions for 30 min at room temperature and then exposed to in vivo erosive challenges by rinsing with 150 ml of a cola drink (4 × 5 min/day) for 7 days. The substance loss of the specimens was measured by profilometry. The transverse sections of the specimens were examined using scanning electron microscopy. Thereafter, the demineralized organic matrix (DOM) of the specimens was removed using type I collagen enzyme and assessed by performing profilometry. The differences in substance loss and DOM thickness among the groups were analyzed by one-way repeated-measures analysis of variance (ANOVA) and Bonferroni's test at a level of P < 0.05.

RESULTS

Protease inhibitors significantly reduced substance loss in comparison to that of the control group (all P < 0.05). A significantly thicker DOM was observed for the specimens treated with protease inhibitors than for the control specimens (all P < 0.05). No significant differences in substance loss or DOM thickness were found among the MMP inhibitor, cysteine cathepsin inhibitor, and MMP + cysteine cathepsin inhibitor groups.

CONCLUSIONS

The use of MMP and cysteine cathepsin inhibitors was shown to increase the acid resistance of human dentin, which may be due to the preservation of the DOM.

CLINICAL RELEVANCE

The application of protease inhibitors could be considered an appropriate preventive strategy for dentin erosion.

Enamel and Dentin Etching with Glycolic, Ferulic, and Phosphoric Acids: Demineralization Pattern, Surface Microhardness, and Bond Strength Stability

This study evaluated the etching pattern, surface microhardness, and bond strength for enamel and dentin submitted to treatment with phosphoric, glycolic, and ferulic acids. Enamel and dentin blocks were treated with phosphoric, glycolic, and ferulic acid to evaluate the surface and adhesive interface by scanning electron microscopy (2000×). Surface microhardness (Knoop) was evaluated before and after etching, and microtensile bond strength was evaluated after application of a two-step adhesive system (Adper Single Bond 2, 3M ESPE) at 24 hours and 12 months storage time points. Analysis of variance (ANOVA) and Tukey's test showed a decrease in the microhardness values for both substrates after application of each acid (p<0.0001). The reduction percentage was significantly higher for enamel treated with phosphoric acid (59.9%) and glycolic acid (65.1%) than for ferulic acid (16.5%) (p<0.0001), and higher for dentin that received phosphoric acid (38.3%) versus glycolic acid (27.8%) and ferulic acid (21.9%) (p<0.0001). Phosphoric and glycolic acids led to homogeneous enamel demineralization, and promoted the opening of dentinal tubules, whereas ferulic acid led to enamel surface demineralization and partially removed the smear layer. The adhesive-enamel interface showed micromechanical embedding of the adhesive in the interprismatic spaces when phosphoric and glycolic acids were applied. Ferulic acid showed no tag formation. Microtensile bond strength at both time points, and for both substrates, was lower with ferulic acid (p=0.0003/E; p=0.0011/D; Kruskal Wallis and Dunn). The bond strength for enamel and dentin decreased when using phosphoric and glycolic acids at the 12-month time evaluation (p<0.05). Glycolic acid showed an etching pattern and microhardness similar to that of phosphoric acid. Ferulic acid was not effective in etching the enamel or dentin, and it did not provide satisfactory bond strength to dental substrates.

Do matrix metalloproteinase and cathepsin K inhibitors work synergistically to reduce dentin erosion?

OBJECTIVES

To evaluate the effects of matrix metalloproteinase (MMP) and cathepsin K (catK) inhibitors on resistance to dentin erosion.

METHODOLOGY

A total of 96 dentin specimens (3×3×2 mm) were prepared and randomly assigned into four groups (n=24): deionized water (DW); 1 µM odanacatib (ODN, catK inhibitor); 1 mM 1,10-phenanthroline (PHEN, MMP inhibitor); and 1 µM odanacatib + 1 mM 1,10-phenanthroline (COM). Each group was further divided into two subgroups for the application of treatment solutions before (PRE) and after erosive challenges (POST). All specimens were subjected to four daily erosive challenges for 5 d. For each erosive challenge, the specimens in subgroup PRE were immersed in the respective solutions before cola drinks, while the specimens in subgroup POST were immersed in the respective solutions after cola drinks (the immersion duration was 5 min in both cases). All specimens were stored in artificial saliva at 37°C between erosive challenges. The erosive dentin loss (EDL) was measured by profilometry. The residual demineralized organic matrix (DOM) of specimens was removed using type VII collagenase and evaluated by profilometry. Both the EDL and thickness of the residual DOM were statistically analyzed by two-way analysis of variance (ANOVA) and Bonferroni's test (α=0.05). The surface topography and transverse sections of the specimens were observed using SEM. MMPs and catK were immunolabeled in the eroded dentin and in situ zymography was performed to evaluate the enzyme activity.

RESULTS

Significantly lower EDL was found in the groups ODN, PHEN, and COM than in the control group (all p<0.05), while no significant difference in EDL was found among the groups ODN, PHEN, and COM (all p>0.05). The application sequence showed no significant effect on the EDL of the tested groups (p=0.310). A significantly thicker DOM was observed in the group ODN than in the control group regardless of the application sequence (both p<0.05). The treatment with ODN, PHEN, and COM inhibited the gelatinolytic activity by approximately 46.32%, 58.6%, and 74.56%, respectively.

CONCLUSIONS

The inhibition of endogenous dentinal MMPs and catK increases the acid resistance of human dentin but without an apparent synergistic effect. The inhibition of MMPs and catK is equally effective either before or after the acid challenge.

Incorporation of MMP inhibitors into dental adhesive systems and bond strength of coronal composite restorations: A systematic review and meta-analysis of in vitro studies

Purpose

To systematically review in vitro studies that incorporated MMP inhibitors into adhesive systems in terms of the effect on immediate and aged bond strength of dental composite to dentine.

Materials and methods

Independently, two reviewers conducted an electronic search in three databases (MEDLINE, EMBASE, and Google Scholar) following the Preferred Reporting Items for Systematic Review and Meta-Analyses Protocols (PRISMA-P), up to 6 March 2022.

Results

The search resulted in 894 papers, 33 of which were eligible to be included in the review; of those, 13 fulfilled the meta-analysis eligibility criteria. Nineteen inhibitors were used among the studies, and those included in the meta-analysis were 2%, 0.2% chlorhexidine (CHX), 5 µM GM1489, and 0.5%, 1% benzalkonium chloride (BAC). In the meta-analysis, while above inhibitors showed no adverse effect on bond strength, 0.2% CHX and 5 µM GM1489 caused a significant increase in immediate and 12-months bond strength. All other inhibitors resulted in a significant increase in bond strength at six months of ageing.

Conclusions

Incorporation of MMP inhibitors into the adhesive system has no unfavourable effect on immediate bond strength but a favourable effect on longer-term bond strength. Additionally, inhibitors other than CHX could have similar or better effects on bond strength.

Present status and future directions: The restoration of root filled teeth

This narrative review will focus on a number of contemporary considerations relating to the restoration of root filled teeth and future directions for research. Clinicians are now more than ever, aware of the interdependence of the endodontic and restorative aspects of managing root filled teeth, and how these aspects of treatment are fundamental to obtaining the best long-term survival. To obtain the optimal outcomes for patients, clinicians carrying out endodontic treatment should have a vested interest in the restorative phase of the treatment process, as well as an appreciation for the structural and biomechanical effects of endodontic-restorative procedures on restoration and tooth longevity. Furthermore, the currently available research, largely lacks appreciation of occlusal factors in the longevity of root filled teeth, despite surrogate outcomes demonstrating the considerable influence this variable has. Controversies regarding the clinical relevance of minimally invasive endodontic and restorative concepts are largely unanswered with respect to clinical data, and it is therefore, all too easy to dismiss these ideas due to the lack of scientific evidence. However, conceptually, minimally invasive endodontic-restorative philosophies appear to be valid, and therefore, in the pursuit of improved clinical outcomes, it is important that the efficacies of these treatment protocols are determined. Alongside an increased awareness of the preservation of tooth structure, developments in adhesive bonding, ceramic materials and the inevitable integration of digital dentistry, there is also a need to evaluate the efficacy of new treatment philosophies and techniques with well-designed prospective clinical studies.

Biodegradation of Dental Resin-Based Composite—A Potential Factor Affecting the Bonding Effect: A Narrative Review

In recent years, although resin composite has played an important role in the restoration of tooth defects, it still has several disadvantages, including being biodegraded by saliva, bacteria and other enzymes in the oral cavity, which may result in repair failure. This factor is not conducive to the long-term survival of the prosthesis in the mouth. In this article, we review the causes, influencing factors and prevention methods of resin biodegradation. Biodegradation is mainly caused by esterase in saliva and bacteria, which breaks the ester bond in resin and causes the release of monomers. The mechanical properties of the prosthesis can then be affected. Meanwhile, cathepsin and MMPs are activated on the bonding surface, which may decompose the dentin collagen. In addition, neutrophils and residual water on the bonding surface can also aggravate biodegradation. Currently, the primary methods to prevent biodegradation involve adding antibacterial agents to resin, inhibiting the activity of MMPs and enhancing the crosslinking of collagen fibers. All of the above indicates that in the preparation and adhesion of resin materials, attention should be paid to the influence of biodegradation to improve the prosthesis’s service life in the complex environment of the oral cavity.

Matrix Metalloproteinases in Dental and Periodontal Tissues and Their Current Inhibitors: Developmental, Degradational and Pathological Aspects

Objectives: This review article aims to describe some of the roles of Matrix metalloproteinases (MMPs) in enamel, dentine, dental caries, hybrid layer degradation, pulp and periodontal tissues, throwing light on their current inhibitors. The article addresses the potential of MMPs to serve as biomarkers with diagnostic and therapeutic value. Design: The sections of this review discuss MMPs’ involvement in developmental, remodeling, degradational and turnover aspects of dental and periodontal tissues as well as their signals in the pathogenesis, progress of different lesions and wound healing of these tissues. The literature was searched for original research articles, review articles and theses. The literature search was conducted in PubMed and MEDLINE for articles published in the last 20 years. Results: 119 published papers, two textbooks and two doctoral theses were selected for preparing the current review. Conclusions: MMPs are significant proteases, of evident contribution in dental and periapical tissue development, health and disease processes, with promising potential for use as diagnostic and prognostic disease biomarkers. Continuing understanding of their role in pathogenesis and progress of different dental, periapical and periodontal lesions, as well as in dentine-pulp wound healing could be a keystone to future diagnostic and therapeutic regimens.

Effect of pretreatment with matrix metalloproteinase inhibitors on the durability of bond strength of fiber posts to radicular dentin

Objectives

Application of matrix metalloproteinases inhibitors has been suggested to improve the durability of resin–dentin bonding. The purpose of this study was to evaluate the effect of dimethyl sulfoxide (DMSO), carbodiimide (EDC), and chlorhexidine (CHX) treatment on the push‐out bond strength of fiber posts to radicular dentin.

Materials and Methods

24 extracted premolars were assigned randomly to 4 groups after root canal treatment and post space preparation (n = 6). In the first, second, and third groups, radicular dentin was treated with 1 ml of 5% DMSO, 0.3 M EDC, and 2% CHX, respectively. The fourth group (control) received no treatment. The root canals were primed with ED primer II, and the fiber posts were cemented with Panavia F2.0. In each group, half of the specimens were subjected to the push‐out test and the other half to 3000 thermal cycles before testing. Data were analyzed using two‐way analysis of variance via SPSS version 20 (p < .05).

Results

Among the nonthermocycled specimens, the values of push‐out bond strength were observed in the control, EDC, CHX, and DMSO groups, in decreasing order. Among the thermocycled specimens, the values were observed in the control, EDC, DMSO, and CHX groups in decreasing order. Thermocycling had a significant adverse effect on the push‐out bond strength (p = .015), but the effect of material (p = .375), and the interaction effect of material and thermocycling (p = .998) were not significant.

Conclusions

Application of CHX, DMSO, and EDC had no significant effect on the bond strength of fiber posts to radicular dentin.

Inhibitory activity of S-PRG filler on collagen-bound MMPs and dentin matrix degradation

OBJECTIVES

To evaluate the inhibitory activity of an ion-releasing filler (S-PRG) eluate on dentin collagen-bound metalloproteinases (MMPs) and dentin matrix degradation.

METHODS

Dentin beams (5 × 2 × 0.5 mm) from human molars were completely demineralized to produce dentin matrix specimens. The dry mass was measured, and a colorimetric assay (Sensolyte) determined the initial total MMP activity to allocate the beams into four treatment groups (n = 10/group): 1) water for 1 min (negative control); 2) 2% chlorhexidine digluconate (CHX - inhibitor control) for 1 min; 3) S-PRG eluate for 1 min; 4) S-PRG eluate for 30 min. After the treatments, the total MMP activity was reassessed. The specimens were stored in simulated body fluid (SBF) at 37 °C for up to 21 days. The dry mass was reassessed weekly. On day 7, the dentin matrix degradation was analyzed for the presence of collagen fragments (CF; Sirius Red) and hydroxyproline (Hyp) in the SBF. Statistical analyses were performed with ANOVA/Tukey, paired t-tests, and RM-ANOVA/Sidak (α = 5%).

RESULTS

S-PRG eluate exposure for 1 and 30 min reduced (p < 0.0001) MMP activity. S-PRG exposure for 30 min presented MMP activity inhibition equivalent to CHX (p = 0.061). S-PRG and CHX decreased CF (p ≤ 0.007) and Hyp (p < 0.046) release. After 21 days of storage, S-PRG-treated beams, regardless of exposure time, presented a reduced (p ≤ 0.017) mass loss, intermediate between CHX and control.

CONCLUSION

Treating demineralized dentin with S-PRG eluate for 1 or 30 min reduced matrix-bound MMP activity and dentin matrix degradation for up to 21 days.

CLINICAL SIGNIFICANCE

S-PRG filler may hinder the progression of dentin carious/erosive lesions and enhance the stabilization of dentin bonding interfaces.

Gelatinolytic activity after dentin pretreatment with dimethyl sulfoxide (DMSO) combined to dental bonding systems: Perspectives for biological responses

Endogeneous proteolytic responses in dentin bonding interface have addressing to strategies to preventive and therapeutic approaches of clinical use of dentin bonding systems (DBSs), but still present limitations. The aim of this study was to examine the gelatinolytic profile by means of in situ zymography regarding the use of 1% dimethyl sulfoxide (DMSO) as an aprotic solvent. Sound human third molars were prepared and randomized in 10 groups, following the factors 1- DBS: Adper™ Scotchbond Multipurpose [MP], Adper™ Single Bond 2 [SB], Clearfil™ SE Bond [CSE] and Adper™ Scotchbond Universal - Etch-and-rinse [SU-ER] mode and self-etch mode [SU-SE], 2- dentin pretreatment: Control - Water [C], 2% CHX and 1% DMSO and 3- time: Initial-24 h [I], 6 months [6M] and 30 months [30M]. Pretreatments were applied before primer application for 30s. After restoration, specimens were cut into slices, in which one third were incubated with fluorescein-conjugated gelatin for 24h at 37 °C and analyzed by confocal laser scanning microscopy. The other two-thirds were stored for 6 or 30 months at 37 °C. Fluorescence was quantified using Image J and data was subjected for two-way ANOVA followed by Tukey test (p<0.05). Neither DMSO nor CHX affected initial analyses for any tested conditions. After 6 months, it was observed increased fluorescence for MP using both pretreatments and for SB using only DMSO. Regardless time and pretreatment, CSE and SU-SE showed stabilized gelatinolytic pattern. For SU-ER, both CHX and DMSO were able to maintain a lower fluorescence compared to control group after 6 months. 30-month performance states the susceptibility of degradation for all etched-dentin systems. DMSO pretreatment can be promising to reduce gelatinolytic activity combined with an universal adhesive system under etch-and-rinse mode. For self-etching strategies, DMSO was successful to stabilize the gelatinolytic reactions.

Chlorhexidine gluconate enhances the remineralization effect of high viscosity glass ionomer cement on dentin carious lesions in vitro

Background

To compare the mean mineral density (MMD) and examine the remineralization of carious dentin after cavity disinfection with chlorhexidine gluconate (CHX) and restoration with high viscosity glass ionomer cement (H-GIC) in vitro.

Methods

Selective caries removal to leathery dentin was performed in 40 extracted primary molars. The samples were scanned using micro-computed tomography (micro-CT) to determine the MMD baseline and randomly divided into 4 groups (n = 10): Equia™ group, applied dentin conditioner and restored with H-GIC (Equia Forte™), CHX-Equia™ group, disinfected the cavity with 2% CHX before applying dentin conditioner and restored with H-GIC (Equia Forte™), Ketac™ group, restored with H-GIC (Ketac Universal™) and CHX-Ketac™ group, disinfected the cavity with 2% CHX before restored with H-GIC (Ketac Universal™). The samples underwent micro-CT scanning post-restoration and post-pH-cycling to determine their respective MMDs. One sample from each group was randomly selected to analyze by scanning electron microscopy (SEM).

Results

The MMD gain in the 4 groups post-restoration was significantly different between the Equia™ and CHX-Ketac™ groups (oneway ANOVA with Post hoc (Tukey) test, P = 0.045). There was a significant difference in MMD gain post-restoration between the Equia™ and CHX-Equia™ groups (Independent t-test, P = 0.046). However, the Ketac™ and CHX-Ketac™ group’s MMD were similar. The SEM images revealed that the CHX-Ketac™ group had the smallest dentinal tubule orifices and the thickest intertubular dentin among the groups. However, the CHX-Equia™ group had thicker intertubular dentin than the Equia™ group.

Conclusion

Applying 2% CHX on demineralized dentin enhances the remineralization of the dentin beneath the restoration.

Effect of Cavity Cleanser With Long-Term Antibacterial and Anti-Proteolytic Activities on Resin-Dentin Bond Stability

Objective

Secondary caries caused by oral microbiome dysbiosis and hybrid layer degradation are two important contributors to the poor resin-dentin bond durability. Cavity cleansers with long-term antimicrobial and anti-proteolytic activities are in demand for eliminating bacteria-induced secondary caries and preventing hybrid layers from degradation. The objectives of the present study were to examine the long-term antimicrobial effect and anti-proteolytic potential of poly(amidoamine) dendrimers with amino terminal groups (PAMAM-NH₂) cavity cleanser.

Methods

Adsorption tests by attenuated total reflectance-infrared (ATR-IR) spectroscopy and confocal laser scanning microscopy (CLSM) were first performed to evaluate whether the PAMAM-NH₂ cavity cleanser had binding capacity to dentin surface to fulfill its relatively long-term antimicrobial and anti-proteolytic effects. For antibacterial testing, Streptococcus mutans, Actinomyces naeslundii, and Enterococcus faecalis were grown on dentin surfaces, prior to the application of cavity cleanser. Colony-forming unit (CFU) counts and live/dead bacterial staining were performed to assess antibacterial effects. Gelatinolytic activity within the hybrid layers was directly detected by in situ zymography. Adhesive permeability of bonded interface and microtensile bond strength were employed to assess whether the PAMAM-NH₂ cavity cleanser adversely affected resin-dentin bonding. Finally, the cytotoxicity of PAMAM-NH₂ was evaluated by the Cell Counting Kit-8 (CCK-8) assay.

Results

Adsorption tests demonstrated that the binding capacity of PAMAM-NH₂ on dentin surface was much stronger than that of 2% chlorhexidine (CHX) because its binding was strong enough to resist phosphate-buffered saline (PBS) washing. Antibacterial testing indicated that PAMAM-NH₂ significantly inhibited bacteria grown on the dentin discs as compared with the control group (p < 0.05), which was comparable with the antibacterial activity of 2% CHX (p > 0.05). Hybrid layers conditioned with PAMAM-NH₂ showed significant decrease in gelatin activity as compared with the control group. Furthermore, PAMAM-NH₂ pretreatment did not adversely affect resin-dentin bonding because it did not decrease adhesive permeability and microtensile strength. CCK-8 assay showed that PAMAM-NH₂ had low cytotoxicity on human dental pulp cells (HDPCs) and L929.

Conclusions

PAMAM-NH₂ cavity cleanser developed in this study could provide simultaneous long-term antimicrobial and anti-proteolytic activities for eliminating secondary caries that result from a dysbiosis in the oral microbiome and for preventing hybrid layers from degradation due to its good binding capacity to dentin collagen matrix, which are crucial for the maintenance of resin-dentin bond durability.

A mussel glue-inspired monomer-etchant cocktail for improving dentine bonding

OBJECTIVES

The humid oral environment adversely affects the interaction between a functionalised primer and dentine collagen after acid-etching. Robust adhesion of marine mussels to their wet substrates instigates the quest for a strategy that improves the longevity of resin-dentine bonds. In the present study, an etching strategy based on the incorporation of biomimetic dopamine methacrylamide (DMA) as a functionalised primer into phosphoric acid etchant was developed. The mechanism and effect of this DMA-containing acid-etching strategy on bond durability were examined.

METHODS

Etchants with different concentrations of DMA (1, 3 or 5 mM) were formulated and tested for their demineralisation efficacy. The interaction between DMA and dentine collagen, the effect of DMA on collagen stability and the collagenase inhibition capacity of the DMA-containing etchants were evaluated. The effectiveness of this new etching strategy on resin-dentine bond durability was investigated.

RESULTS

All etchants were capable of demineralising dentine and exposing the collagen matrix. The latter strongly integrated with DMA via covalent bond, hydrogen bond and Van der Waals' forces. These interactions significantly improve collagen stability and inhibited collagenase activity. Application of the etchant containing 5 mM DMA achieved the most durable bonding interface.

CONCLUSION

Dopamine methacrylamide interacts with dentine collagen in a humid environment and improves collagen stability. The monomer effectively inactivates collagenase activity. Acid-etching with 5 mM DMA-containing phosphoric acid has the potential to prolong the longevity of bonded dental restorations without compromising clinical operation time.

CLINICAL SIGNIFICANCE

The use of 5 mM dopamine methacrylamide-containing phosphoric acid for etching dentine does not require an additional clinical step and has potential to improve the adhesive performance of bonded dental restorations.

Phenolic extract of Libidibia ferrea inhibits dentin endogenous enzymatic activity depending on the adhesive system strategy

This study evaluated the influence of Libidibia ferrea (Lf) extract used as dentin pretreatment on the resin-dentin bond strength stability and dentin endogenous enzymatic activity. The phytochemical profile (PP) of the Lf extract was evaluated by liquid chromatography; particle size, polydispersity index (PdI), and zeta potential (ZP) were evaluated by dynamic light scattering. The tested groups were ER-Scotchbond Universal (SBU) in the etch-and-rinse (ER) mode; ERLf-SBU in the ER mode + Lf after etching; SE- SBU in the self-etch (SE) mode; and LfSE-Lf before SBU in the SE mode. Sticks were obtained for microtensile bond strength tests and failure mode (24 hr and 12 months). The hybrid layer was evaluated using scanning electron microscopy. The endogenous enzymatic activity of the underlying dentin was analyzed by in situ zymography with the same treatments. The PP showed the presence of quercetin (2.6% w/w). Lf particles were considered large after the analysis of the PdI. The ZP remained stable over time. The ER and ERLf groups had lower bond strength after 12 months, but SE and LfSE remained stable. The predominant failure mode was adhesive for both times. ER and ERLf had longer resin tags and a thicker hybrid layer. The ER and LfSE groups showed higher enzymatic activity than the ERLf and SE groups after 12 months. The Lf extract may contribute to inhibit the dentin endogenous enzymatic activity when associated with an adhesive system in the ER mode.

Clinical influence of calcium hydroxide intracanal medications on matrix metalloproteinases and tissue inhibitors of metalloproteinases in apical periodontitis

OBJECTIVES

This study investigated the influence of calcium hydroxide intracanal medications on the levels of metalloproteinases (MMPs) and their tissue inhibitors (TIMPs) in apical periodontitis (AP).

MATERIALS AND METHODS

Twenty primarily infected root canals with AP were randomly divided into two groups: Ca(OH)₂ + sterile saline solution (SSL) group and Ca(OH)₂ + 2% chlorhexidine gel (CHX gel) group. We collected samples from the periradicular tissue fluid (PTF) before (s1) and after 14 days of intracanal medication (s2). MMP-1, MMP-2, MMP-9, TIMP-1, and TIMP-2 were measured by ELISA assay.

RESULTS

MMP-1, MMP-2, MMP-9, TIMP-1, and TIMP-2 were detected in all PTF samples at s1 and s2 (20/20). At s1, MMP-2 and MMP-9 were detected at higher levels than MMP-1 (p < .05). Higher levels of TIMP-1 than TIMP-2 were found in AP (p < .05). Additionally, we detected higher MMP-1, MMP-2, and MMP-9 over TIMP-1 and TIMP-2 levels in AP (p < .05). At s2, Ca(OH)₂ + SSL was as effective as Ca(OH)₂ + 2% CHX gel in lowering the levels of MMP-1, MMP-2, and MMP-9 after 14 days of intracanal medication, with no significant difference between them (p > .05). Both Ca(OH) ₂ intracanal medications had no significant impact on the levels of TIMP-1 and TIMP-2 (both p > .05). At s2, TIMP-1 levels were higher than TIMP-2 (p < .05). Moreover, there were positive correlations between the levels of MMP-1 and TIMP-1 and MMP-1 and TIMP-2 (p < .05).

CONCLUSIONS

Calcium hydroxide medications effectively lowered the levels of MMP-1, MMP-2, and MMP-9 in periapical tissues after 14 days of treatment, with no difference between them. Moreover, the calcium hydroxide intracanal medications tested here had no impact in TIMP-1 and TIMP-2 in periapical tissues.

CLINICAL RELEVANCE

MMPs and TIMPs play an essential role in the degradation of the extracellular matrix. The imbalance MMPs and TIMPs can cause periapical tissue destruction. Therefore, the reestablishment of the balance between activated MMPs and TIMPs with root canal therapy is essential to restore tissue homeostasis.

Synthesis and characterization of an experimental primer containing chitosan nanoparticles - Effect on the inactivation of metalloproteinases, antimicrobial activity and adhesive strength

OBJECTIVE

The aim of this study was to synthesize and characterize an experimental primer containing cationic lipid nanoparticles (NPL-chitosan) and to evaluate its properties.

DESIGN

The NPL-chitosan were synthesized by emulsion and sonication method. The experimental primers were applied in dentin surface of fifty human molars. The experimental groups were: 1) application of commercial primer; 2) Primer containing 2% of Chlorhexidine (CHX) 3); Primer with 2% NPL-chitosan 4); Primer with 0.6 % of NPL-chitosan 5); Primer with 0.4 % of NPL-chitosan. A composite resin plateau was used for the analysis, where sections were made for making the dentin beams. The effect of experimental primer with cationic nanoparticles in the inhibition of matrix metalloproteinase (MMP) activity was carrying out by in situ zymography. For the Resin-Dentin Adhesive Strength and in situ Zymography analysis, was used the One-way analysis of variance (ANOVA) with significance level of 95 %.

RESULTS

Spherical NPL-chitosan presented size below 220 nm, polydispersity index of 0.179 and zeta potential positive and was stable over 75 days. These nanoparticles showed antibacterial activity agsainst S. mutans with MIC of the 0.4 % and MBC of 0.67 %. In the Microtensile Strength, no statistical difference was observed between the experimental groups (p = 0.9054). The in situ zymography assay showed that the group with 2% of NPL-chitosan presented higher inactivation activity of MMPs compared to the other groups (p < 0.05).

CONCLUSION

The experimental primer containing NPL-chitosan has antimicrobial activity, does not alter the adhesive resistance and inactivates MMPs present in dentin.

Effect of side-group methylation on the performance of methacrylamides and methacrylates for dentin hybridization

The stability of the bond between polymeric adhesives to mineralized substrates is crucial in many biomedical applications. The objective of this study was to determine the effect of methyl substitution at the α- and β-carbons on the kinetics of polymerization, monomer hydrolytic stability, and long-term bond strength to dentin for methacrylamide- and methacrylate-based crosslinked networks for dental adhesive applications.

METHODS

Secondary methacrylamides (α-CH3 substituted=1-methyl HEMAM, β-CH3 substituted=2-methyl HEMAM, and unsubstituted=HEMAM) and OH-terminated methacrylates (α- and β-CH3 mixture=1-methyl HEMA and 2-methyl HEMA, and unsubstituted=HEMA) were copolymerized with urethane dimethacrylate. The kinetics of photopolymerization were followed in real-time using near-IR spectroscopy. Monomer hydrolysis kinetics were followed by NMR spectroscopy in water at pH 1 over 30 days. Solvated adhesives (40 vol% ethanol) were used to bond composite to dentin and microtensile bond strength (μTBS) measured after 24h and 6 months storage in water at 37°C.

RESULTS

The rate of polymerization increased in the following order: OH-terminated methacrylates≥methacrylamides>NH2-terminated methacrylates, with minimal effect of the substitution. Final conversion ranged between 79% for 1-methyl AEMA and 94% for HEMA. 1-methyl-HEMAM showed the highest and most stable μTBS, while HEMA showed a 37% reduction after six months All groups showed measurable degradation after up to 4 days in pH 1, with the methacrylamides showing less degradation than the methacrylates. Additionally, transesterification products were observed in the methacrylamide groups.

SIGNIFICANCE

Amide monomers were significantly more stable to hydrolysis than the analogous methacrylates. The addition of a α- or β-CH3 groups increased the rate of hydrolysis, with the magnitude of the effect tracking with the expected base-catalyzed hydrolysis of esters or amides, but opposite in influence. The α-CH3 substituted secondary methacrylamide, 1-methyl HEMAM, showed the most stable adhesive interface. A side reaction was observed with transesterification of the monomers studied under ambient conditions, which was not expected under the relatively mild conditions used here, which warrants further investigation.

Impact of biomineralization on resin/biomineralized dentin bond longevity in a minimally invasive approach: An "in vitro" 18-month follow-up

OBJECTIVES

To determine the impact of treating caries-affected dentin (CAD) with: 0.2% sodium fluoride (NaF), casein phosphopeptide-amorphous calcium phosphate (CPP-ACP/MI Paste™) or peptide P₁₁-4 (Curodont™ Repair) on the longevity of resin/CAD interface at storage times of 24 -h, 6- and 18-month.

METHODS

255 caries-free third molars were used, and CAD was produced by a biological method. The teeth were randomly distributed into: G1- Sound dentin (SD); G2- CAD; G3- CAD + 0.2% NaF (CAD/NaF); G4- CAD + CPP-ACP (CAD/ACP); G5- CAD + Curodont™ Repair (CAD/P₁₁-4). The Filtek Z350 composite resin block was bonded to dentin using Adper™ Single 2 (4 mm/height). Resin/dentin blocks were stored in a solution of Simulated Body Fluid at 37 °C, pressures were modified to simulate natural pulpal pressures. Specimens were investigated by microtensile bond strength (μTBS) (n = 8), Scanning Electron Microscopy (to assess the failure mode) (n = 8), nanoinfiltration (to assess the interface sealing) (n = 3), in situ zymography (to assess the gelatinolytic activity) (n = 3) and micro-computed microtomography (μ-CT) (to assess the mineralization) (n = 3). Data from μTBS, μ-CT and, nanoinfiltration and hybrid layer formation/degradation were submitted to two-way ANOVA and Tukey tests, and failure patterns and in situ zymography to Kruskal-Wallis and Dunn tests (α = 5%).

RESULTS

The highest mineral density change by μ-CT, smallest silver nitrate infiltration and proteolytic activity in the adhesive layer were obtained significantly for the groups SD, CAD/ACP and CAD/P₁₁-4, with most mixed fractures at 18-month (p < 0.001). CAD/NaF showed significantly similar values to CAD, CAD and CAD/NaF which presented a high percentage of adhesive fracture (p < 0.001) at all time periods.

SIGNIFICANCE

Treating caries-affected dentin with remineralizing agents CPP-ACP and Curodont™ Repair, has the potential to be a clinically relevant treatment protocol to increase the longevity of adhesive restorations.

Biochemical and immunohistochemical analysis of tissue inhibitor of metalloproteinases-1 in human sound dentin

Objectives

Matrix metalloproteases (MMPs) are a family of enzymes that operate a proteolytic activity at the level of the extracellular matrix. MMPs are regulated by tissue inhibitors of metalloproteinases (TIMPs) that can ubiquitously bind different enzyme forms. The study aims to identify a morfo-functional association between TIMP-1 and MMP-2 and -9 in human dentin.

Materials and methods

Proteins were extracted from demineralized human sound dentin powder and centrifuged to separate two aliquots with different molecular weights of proteins, higher and lower than 30 kDa. In each aliquot, the evaluation of the presence of TIMP-1/MMP-2 and TIMP-1/MMP-9 was performed using co-immunoprecipitation/immunoblotting analysis. The distribution of TIMP-1, in association with MMP-2 and -9, was investigated using a double immunohistochemical technique. Furthermore, the activity of TIMP-1 was measured by reverse zymography, where acrylamide gel was copolymerized with gelatin and recombinant MMP-2.

Results

Co-immunoprecipitation/immunoblotting analysis showed the association TIMP-1/MMP-2 and TIMP-1/MMP-9 in human sound dentin. Electron microscopy evaluation revealed a diffuse presence of TIMP-1 tightly associated with MMP-2 and -9. Reverse zymography analysis confirmed that TIMP-1 present in human dentin is active and can bind different MMPs isoforms.

Conclusions

The strict association of TIMP-1 with MMP-2 and -9 in situ appeared a constant finding in the human sound dentin.

Clinical relevance

Considering the role of TIMP-1, MMP-2, and MMP-9 within the connective tissues, clinically applicable protocols could be developed in the future to increase or decrease the level of TIMPs in human dentin to regulate the activity of MMPs, contributing to reduce caries progression and collagen degradation.

Extracellular matrix degradation by host matrix metalloproteinases in restorative dentistry and endodontics: An overview

Matrix metalloproteinases (MMPs) are a group of over 25 secreted and membrane-bound enzymes responsible for pericellular substrate degeneration. In response to injury, they play key roles in morphogenesis, wound healing, tissue repair and remodeling. They have been isolated from dentin, odontoblasts, pulp and periapical tissue. They play a major role in the formation of dentin matrix and secondary and tertiary dentin. These are also responsible for releasing dentinal growth factors. MMP family proteins elicit a dual role in the pathogenesis of inflammation, stimulating protective innate and/or adaptive immune functions, as well as tissue destruction. The main organic component of tooth structure is collagen, and MMPs that degrade collagen and the extracellular matrix have been implicated in the progression of dental caries, dental erosion as well as degradation of the hybrid layer. MMPs have also been shown to be active in pulpitis, and studies have shown that they can be used as diagnostic markers of pulpal and periapical inflammation. This review describes the role of MMPs in dental caries, dental erosion, bond stability as well as in pulpal and periapical inflammation.

Antioxidants and Collagen-Crosslinking: Benefit on Bond Strength and Clinical Applicability

Antioxidants are known for their potential of strengthening the collagen network when applied to dentin. They establish new intra-/intermolecular bonds in the collagen, rendering it less perceptive to enzymatic hydrolysis. The study evaluated the benefit on shear bond strength (SBS) of a resin–composite to dentin when antioxidants with different biomolecular mechanisms or a known inhibitor of enzymatic activity are introduced to the bonding process in a clinically inspired protocol. Specimens (900) were prepared consistent with the requirements for a macro SBS-test. Four agents (Epigallocatechingallate (EGCG), Chlorhexidindigluconate (CHX), Proanthocyanidin (PA), and Hesperidin (HPN)) were applied on dentin, either incorporated in the primer of a two-step self-etch adhesive or as an aqueous solution before applying the adhesive. Bonding protocol executed according to the manufacturer’s information served as control. Groups (n = 20) were tested after one week, one month, three months, six months, or one year immersion times (37 °C, distilled water). After six-month immersion, superior SBS were identified in PA compared to all other agents (p < 0.01) and a higher reliability in both primer and solution application when compared to control. After one year, both PA incorporated test groups demonstrated the most reliable outcome. SBS can benefit from the application of antioxidants. The use of PA in clinics might help extending the lifespan of resin-based restorations.

Antimicrobial antidegradative dental adhesive preserves restoration-tooth bond

OBJECTIVE

Assess the ability of an antimicrobial drug-releasing resin adhesive, containing octenidine dihydrochloride (OCT)-silica co-assembled particles (DSPs), to enhance the biostability and preserve the interfacial fracture toughness (FT) of composite restorations bonded to dentin. Enzyme-catalyzed degradation compromises the dental restoration-tooth interface, increasing cariogenic bacterial infiltration. In addition to bacterial ingress inhibition, antimicrobial-releasing adhesives may exhibit direct interfacial biodegradation inhibition as an additional benefit.

METHODS

Mini short-rod restoration bonding specimens with total-etch adhesive with/without 10% wt. DSPs were made. Interfacial fracture toughness (FT) was measured as-manufactured or post-incubation in simulated human salivary esterase (SHSE) for up to 6-months. Effect of OCT on SHSE and whole saliva/bacterial enzyme activity was assessed. Release of OCT outside the restoration interface was assessed.

RESULTS

No deleterious effect of DSPs on initial bonding capacity was observed. Aging specimens in SHSE reduced FT of control but not DSP-adhesive-bonded specimens. OCT inhibited SHSE degradation of adhesive monomer and may inhibit endogenous proteases. OCT inhibited bacterial esterase and collagenase. No endogenous collagen breakdown was detected in the present study. OCT increased human saliva degradative esterase activity below its minimum inhibitory concentration towards S. mutans (MIC), but inhibited degradation above MIC. OCT release outside restoration margins was below detection.

SIGNIFICANCE

DSP-adhesive preserves the restoration bond through a secondary enzyme-inhibitory effect of released OCT, which is virtually confined to the restoration interface microgap. Enzyme activity modulation may produce a positive-to-negative feedback switch, by increasing OCT concentration via biodegradation-triggered release to an effective dose, then subsequently slowing degradation and degradation-triggered release.

Performance of MDP-based system in eroded and carious dentin associated with proteolytic inhibitors: 18-Month exploratory study

The aim of this study was to explore the impact of the interaction between an MDP-based universal adhesive system in etch-and-rinse mode and two proteolytic inhibitors on the longevity of restorations bonded to artificially-affected-dentin substrates. 90 sound human third molars were randomly distributed into three groups according to the substrate: N-no challenges-control (stored in artificial saliva), ACD-artificial caries dentin (6 h DE + 18 h-RE/5 days + 48 h RE) and ERO-artificial erosion dentin (3 × 5 min/5 days with orange juice). They were further redistributed according to dentin pretreatment: W- water (control), CHX-2% digluconate chlorhexidine and E64- 5 μM E64-Trans-Epoxysuccinyl-L-Leucylamido-(4-guanidino) butane, which resulted in the following 9 groups (n = 10): N-W, N-CHX, N-E64, ACD-W, ACD-CHX, ACD-E64, ERO-W, ERO-CHX and ERO-E64. All specimens were restored with Adper Single Bond Universal (Etch-and-rinse mode)/Filtek Z250. Sticks (0.64 mm²) were obtained and subjected to microtensile test (μTBS) in a universal testing machine at 0.5 mm/min for 7-days, 6 and 18-month analyses. Failure modes were classified using optical microscopy (40X). Data were statistically analyzed by three-way ANOVA and Tukey tests (p < 0.05). All individual factors (p < 0.0001) and interaction between factors were statistically significant (substrate X pretreatment (p = 0.00093); substrate X time (p = 0.01035) and pretreatment X time (p = 0.0035). Caries-affected substrate was the most compromised one, disregarding the pretreatment. CHX was mostly affected compared with E64 up to 18 months, possibly due to its calcium-dependent mechanism.

Effect of matrix metalloproteinase inhibitors on microtensile bond strength of dental composite restorations to dentin in use of an etch-and-rinse adhesive system

Aim

This study assesses the effect of matrix metalloproteinases on microtensile bond strength (μTBS) of an etch‐and‐rinse adhesive system.

Methods

This in vitro study evaluated 88 extracted premolars. The teeth were sectioned to expose dentin and were then randomly divided into four groups (n = 22). In group 1 (control), dentin surface was etched, and Adper Single Bond 2 was applied. In groups 2–4, dentin surface was etched and chlorhexidine (CHX), 1‐ethyl‐3‐(3‐dimethylaminopropyl) carbodiimide (EDC), and dimethyl sulfoxide (DMSO) were applied on the surfaces, respectively, and blotted dry. Next, Adper Single Bond 2 was applied and all teeth were built up with Z350 composite. In each group, half the samples immediately and the other half after 10,000 thermal cycles underwent μTBS test. Data were analyzed using ANOVA and Tukey's test (α = .05).

Results

In thermocycled samples, maximum μTBS was noted in CHX group followed by DMSO, EDC, and control group (p < .001). The thermocycled μTBS of composite to dentin was significantly higher in CHX group compared with EDC, DMSO, and control groups (p < .001) but was not significantly different in EDC and DMSO groups (p = .498).

Conclusion

The thermocycled μTBS obtained by the application of CHX, EDC, and DMSO was significantly higher compared with the value to the control group.

Dentifrices or gels containing MMP inhibitors prevent dentine loss: in situ studies

OBJECTIVES

Evaluate the effect of dentifrices or gels containing MMP inhibitors on dentine loss in situ.

MATERIALS AND METHODS

Acrylic palatal appliances containing bovine dentine blocks were divided into two rows, corresponding to the groups erosion (ERO) and erosion associated with abrasion (ERO+ABR). For ERO, the appliances were immersed in a cola drink for 5 min, 4 times/day, while for ERO+ABR, the blocks were brushed for 15 sec with a dentifrice slurry after the second and third erosive challenges. Ten volunteers took part in study 1 (S1), where the dentifrices evaluated contained 1100 ppm fluoride as NaF, 0.61% green tea extract, or 0.012% chlorhexidine digluconate. Thirteen volunteers participated in study 2 (S2), in which the treatment was performed only once (1 min) with gels containing 400 μM EGCG (EGCG400), 0.012% chlorhexidine, 1 mM FeSO₄, 1.23% F (NaF), placebo, or received no treatment. Dentine loss was analyzed by profilometry (μm).

RESULTS

Regarding S1, ERO+ABR induced significantly higher dentine loss compared with ERO and all dentifrices tested led to significantly lower dentine loss when compared with placebo. For S2, regardless of the conditions or times of evaluation, gels containing EGCG, CHX, or FeSO₄ led to significantly less wear compared with the other groups.

CONCLUSION

Both dentifrices and gels containing MMP inhibitors significantly reduced dentine loss.

CLINICAL RELEVANCE

Dentifrices and gels containing MMP inhibitors are able to increase the protection against dentine wear, although gels have a better effect when compared with fluoride gel, lasting up to 10 days after a single application.

Current perspectives on dental adhesion: (3) Adhesion to intraradicular dentin: Concepts and applications

Adhesion science is one of the greatest contributions to restorative dentistry. Adhesion not only established the current principles of tissue preservation, but also allowed for the production of more hermetic and long-lasting restorations. Although adhesive strategies are routinely used in most clinical situations, adhesion to root dentin is still a major challenge. The presence of humidity together with less intertubular dentin are factors that limit the adhesive potential of root dentin. This situation is more unfavorable in endodontically treated teeth prepared for prefabricated or custom-made intraradicular posts; these procedures may alter the mechanical properties of teeth by modifying the viable dentin surface for adhesion. Also, contaminants deposited on the dentin surface are difficult to remove through conventional techniques. Moreover, root canal morphology has a very unfavorable C-factor, bringing undesirable effects resulting from polymerization contraction of resin-based materials. However, the differences between coronal and root dentin are not a barrier for dentin adhesion. Standardization of procedures and care during clinical steps are fundamental to the success of adhesion to coronal or intraradicular dentin. Thus, it is essential to know the anatomy of the root structure, the factors that interfere with intraradicular adhesion, as well as the current adhesive materials and techniques.

Catechin-based Dentin Pretreatment and the Clinical Performance of a Universal Adhesive: A Two-year Randomized Clinical Trial

CLINICAL RELEVANCE

At 24 months, the dentin pretreatment with epigallocatechin-3-gallate did not impair the clinical performance of the adhesive Single Bond Universal regardless of the bonding strategy used.

SUMMARY

Purpose: To evaluate the two-year effect of dentin pretreatment with epigallocatechin-3-gallate (EGCG) on the clinical performance of restorations of noncarious cervical lesions (NCCLs) with Single Bond Universal, applied in two different modes (self-etch and etch-and-rinse).Methods and Materials: In this randomized clinical trial, 33 volunteers were selected, and 156 NCCLs were assigned to four groups: ER, etch-and-rinse; ER-EGCG, 0.1% EGCG dentin pretreatment + etch-and-rinse; SE, self-etch; and SE-EGCG, 0.1% EGCG dentin pretreatment + self-etch. The NCCLs were restored with a nanofilled resin composite and evaluated at baseline and at six, 12, 18, and 24 months using FDI criteria for retention, marginal staining, marginal adaptation, caries, and postoperative sensitivity. Two evaluators were blinded to the treatments performed, and impressions were taken for resin replicas to allow indirect observations. Statistical analyses were performed with Kruskal-Wallis and McNemar tests with a significance level of 5%.Results: Six restorations (one from ER, two from SE, one from ER-EGCG, and two from SEEGCG) were lost at 24 months with no significant differences (p>0.05). The retention rates were 97.0% (ER and ER-EGCG), 94.1% (SE), and 94.2% (SE-EGCG). For marginal adaptation, a significant difference was detected between the baseline and 24 months for the SE group (p=0.0313). There were no statistical differences among all other evaluated criteria at 24 months, neither for each group at baseline nor for 24-month comparisons (p>0.05).Conclusions: The pretreatment with EGCG provided no benefit in the clinical performance of the adhesive regardless of the bonding strategy used. In addition, it adds an additional required step to the restorative procedure.

The Role of Matrix Metalloproteinases in Periodontal Disease

This review provides a detailed description of matrix metalloproteinases (MMPs), focusing on those that are known to have critical roles in bone and periodontal disease. Periodontal disease is an inflammatory process initiated by anaerobic bacteria, which promote the host immune response in the form of a complex network of molecular pathways involving proinflammatory mediators such as cytokines, growth factors, and MMPs. MMPs are a family of 23 endopeptidases, collectively capable of degrading virtually all extracellular matrix (ECM) components. This study critically discusses the available research concerning the involvement of the MMPs in periodontal disease development and progression and presents possible therapeutic strategies. MMPs participate in morphogenesis, physiological tissue turnover, and pathological tissue destruction. Alterations in the regulation of MMP activity are implicated in the manifestation of oral diseases, and MMPs comprise the most important pathway in tissue destruction associated with periodontal disease. MMPs can be considered a risk factor for periodontal disease, and measurements of MMP levels may be useful markers for early detection of periodontitis and as a tool to assess prognostic follow-ups. Detection and inhibition of MMPs could, therefore, be useful in periodontal disease prevention or be an essential part of periodontal disease therapy, which, considering the huge incidence of the disease, may greatly improve oral health globally.

New antimicrobial and collagen crosslinking formulated dentin adhesive with improved bond durability

OBJECTIVE

Here we describe a novel formulation, based on quaternary ammonium (QA) and riboflavin (RF), which combines antimicrobial activities and protease inhibitory properties with collagen crosslinking without interference to bonding capabilities, was investigated.

METHODS

Experimental adhesives modified with different fractions of dioctadecyldimethyl ammonium bromide quaternary ammonium and riboflavin (QARF) were formulated. Dentine specimens were bonded to resincomposites with control or the experimental adhesives to be evaluated for bond strength, interfacial morphology, micro-Raman analysis, nano-CT and nano-leakage expression. In addition, the antibacterial and biocompatibilities of the experimental adhesives were investigated. The endogenous proteases activities and their molecular binding-sites were studied.

RESULTS

Modifying the experimental adhesives with QARF did not adversely affect micro-tensile bond strength or the degree of conversion along with the demonstration of anti-proteases and antibacterial abilities with acceptable biocompatibilities. In general, all experimental adhesives demonstrated favourable bond strength with increased and improved values in 1% QARF adhesive at 24 h (39.2 ± 3.0 MPa) and following thermocycling (34.8 ± 4.3 MPa).

SIGNIFICANCE

It is possible to conclude that the use of QARF with defined concentration can maintain bond strength values when an appropriate protocol is used and have contributed in ensuring a significant decrease in microbial growth of biofilms. Incorporation of 1% QARF in the experimental adhesive lead to simultaneous antimicrobial and anti-proteolytic effects with low cytotoxic effects, acceptable bond strength and interfacial morphology.

Effect of protease inhibitor specificity on dentin matrix properties

OBJECTIVE

To evaluate protease activity of dentin matrices subjected to treatment with non-specific (chlorhexidine - CHX), cysteine cathepsin specific (E-64), and cysteine cathepsin-K (CT-K) specific (Odanacatib - ODN) inhibitors.

METHODS

Pulverized dentin powder obtained from human dentin disks (0.5 mm thickness) completely demineralized with 10% H₃PO₄ were challenged in 1 mL lactic acid (LA) (0.1M, pH 5.5) or stored in deionized water for 30 min. Aliquots of dentin powder were then immersed in 1 mL of CHX (2%), E-64 (10 μM and 20 μM) or Odanacatib (0.2 nM and 1 μM) for 30min. Degradation of dentin collagen was determined by telopeptide assays measuring the sub-product release of C-terminal cross-linked telopeptides (ICTP) and C-terminal peptide (CTX) in incubation media, which correlates with matrix metalloproteinases (MMP) and CT-K activities respectively (n = 3). The ICTP and CTX data were normalized to concentration of total protein (ICTP_tp and CTX_tp) in the media, measured by bicinchoninic acid assay. Dentin matrix properties were also measured by gravimetric change (n = 8) and ultimate tensile strength (UTS) (n = 10). Data were analyzed by one-way ANOVA followed by Tukey's post-hoc test and independent t-test (α = 5%).

RESULTS

Telopeptide assays showed significantly lower CTX_tp values after treatment with E-64 and Odanacatib. E-64 and Odanacatib at all tested concentrations significantly reduced the release of ICTP_tp. Gravimetric analysis showed no significant difference between the tested inhibitors and control except for CHX after lactic acid challenge. UTS results showed significantly higher values for E-64 (20 μM) and Odanacatib (0.2 nM and 1 μM) groups in deionized water.

SIGNIFICANCE

Dentin therapies targeting enzymes such as CT-K by specific inhibitors may provide superior pharmacokinetics and optimum efficacy due to precise protein binding, consequently limiting collagen degradation directly or indirectly by enzyme related pathways.

Evaluation of the bond strength of chlorhexidine incorporated into the adhesive system composition: A PRISMA guided meta-analysis

Background/purpose

Composite resin is currently the most widely used dental restoration material. Previous studies have demonstrated that the application of Chlorhexidine (CHX) on the dentin surface after acid etching can result in an improvement in the integrity and stability of tooth restoration through time. In order to better understand whether CHX can help improve the stability of the resin-dentin bond strength, in this study, a comprehensive review of the effect of adding CHX to the adhesive system on the stability of immediate and long-term resin-dentin bond strength was conducted.

Materials and methods

This article was written in accordance with the PRISMA Statement and is registered on the International Prospective Register of Systematic Reviews (registration number CRD42018084962). Six electronic databases including PubMed, Embase, Cochrane library, ISI Web of Science, ClinicalTrials.gov and China National Knowledge Infrastructure (CNKI) were searched up to October, 2018. Ten articles were selected from 340 possible eligible articles for meta-analysis, and 41 sets of data were analyzed in the meta-analysis.

Results

The results indicated that the use of 0.1% and 0.2% CHX does not adversely affect the immediate bond strength (p > 0.05), but both 0.1% and 0.2% CHX increased bond strength compared with the control group over 12 months (p < 0.05). However, this trend does not represent a longer period of aging.

Conclusion

In these in vitro clinical trials, CHX incorporated into the bonding systems maintained the stability of bond strength.

Effect of black tea and matrix metalloproteinase inhibitors on eroded dentin in situ

Purpose of this in situ study was to evaluate the surface properties of eroded dentin specimens activated with three different matrix metalloproteinase (MMP) inhibitors (chlorhexidine [CHX], fluoride, green tea), black tea, and water. One hundred eighty dentin samples were prepared from extracted third molars and then samples divided into six groups. Ten volunteers were carried three specimens of each group, on acrylic palatal appliances, which were fabricated exactly for them (n = 3). Erosive cycles were done by immersing appliances in cup containing Cola and was followed by rinsing with test solutions. Microhardness values were measured. Surface properties were investigated by atomic force microscopy (AFM). Lowest change in microhardness was shown in fluoride group whereas negative control group (water) had the highest change. There were no statistically significant differences among surface roughness changes (p > .05). The least change in microhardness was seen in the fluoride group (13.05 ± 8.07), while the control group showed the highest change (33.80 ± 12.42) and was statistically significant when compared to other groups (p < .05). Besides lowest depth, values were shown in fluoride group as well. AFM evaluations showed macromolecular deposits on surfaces of fluoride, CHX, and black tea groups. No superior results were detected in CHX + fluoride group and black tea showed similar surface characteristics as green tea. Mouthrinses containing not only green tea but also black tea could be beneficial for patients with exposed dentin surfaces. Catechines and theaflavins in teas could be useful for improving surface quality.

Effect of 2% Chlorhexidine Following Acid Etching on Microtensile Bond Strength of Resin Restorations: A Meta-Analysis

Background and Objectives: The aim of this systematic review was to examine the effect of 2% chlorhexidine following acid etching on the microtensile bond strength of resin restorations for different follow-up times. Materials and Methods: A thorough search of PubMed, Scopus, and Embase databases were conducted. In vitro experimental studies or in vivo studies published up to December 2018 with an experimental group treated with a 2% chlorhexidine solution following acid etching and a control group were included, wherein the final restoration used a resin composite in both the groups. Results: Twenty-one articles were identified for qualitative analysis and 18 for meta-analysis. The difference in the means of microtensile bond strength between the two groups was calculated for the different follow-up times. The differences were significant for 6 months (4.30 MPa; 95% CI 2.72–5.89), 12 months (8.41 MPa; 95% CI 4.93–11.88), and 2–5 years including aged and thermocycling samples (9.08 MPa; 95% CI 5.36–12.81). There were no significant differences for the type of adhesive used. A meta-regression model showed a significant effect of time on the microtensile bond strength. Conclusions: The application of a 2% chlorhexidine solution after acid etching increased the microtensile bond strength significantly for follow-up times of 6 months or more. The adhesive type had no influence.

Evaluation of gap formation at the composite resin-tooth interface after using universal adhesives: In vitro SEM study using the replica technique

The aim of this study was to evaluate gap formation after using two universal adhesives, Peak Universal Bond (P), which contains chlorhexidine and Adhese Universal (A), which contains 10-MDP monomer, and to compare them with two gold standard adhesives. The adhesives were tested in different etching modes, etch-and-rinse (ER) or self-etch (SE), and under thermomechanical loading (TML). Two identical Class V cavities were prepared in each of 30 human third molar teeth, and resin-composite restorations were made. Before and after TML, replicas of the restorations were prepared. Gap formation and their frequency according to the modified classification of Blunck and Zaslansky and the width of the maximum marginal gap (MG) were separately evaluated in enamel and dentin. Gap frequency did not differ significantly only in the enamel before TML, despite the use of different adhesives or etching modes. At both timepoints, the highest MG values were obtained with the Peak Universal Bond self-etch (PSE) group in enamel (6.2 μm before TML, 12.2 μm after TML) and the Peak Universal Bond etch-and-rinse (PER) group in dentine (21.3 μm before TML, 35.5 μm after TML). After TML, there was a significant increase of gap frequency for Adhese universal self-etch (ASE) group and MG values for PER, PSE, ASE groups at the resin-enamel interface, and gap frequency and MG values for all groups at the resin-dentin interface. Universal adhesive with 10-MDP monomer have beneficial effect on the resin-dentin interface, while chlorhexidine may reduce the resistance of the universal adhesive system to oral cavity conditions.

Effect of a novel quaternary ammonium silane cavity disinfectant on cariogenic biofilm formation

OBJECTIVE

Evaluate effect of quaternary ammonium silane (QAS) cavity disinfectant on cariogenic biofilm.

MATERIALS AND METHODS

Single- (Streptococcus mutans or Lactobacillus acidophilus), dual- (Streptococcus mutans/Lactobacillus Acidophilus), and multi-species (Streptococcus mutans, Actinomyces naeslundii, and Streptococcus sanguis) biofilms were grown on acid-etched dentine discs. Biofilms were incubated (120 min/37 °C) and allowed to grow for 3 days anaerobically. Discs (no treatment) served as control (group 1). Groups II, III, IV, and V were then treated with 2% chlorhexidine, and 2%, 5%, and 10% QAS (20 s). Discs were returned to well plates with 300 μL of bacterial suspension and placed in anaerobic incubator at 37 °C and biofilms redeveloped for 4 days. Confocal microscopy, Raman, CFU, and MTT assay were performed.

RESULTS

Raman peaks show shifts at 1450 cm^-1, 1453 cm^-1, 1457 cm^-1, 1460 cm^-1, and 1462 cm^-1 for control, 2% CHX, 2%, 5%, and 10% QAS groups in multi-species biofilms. There was reduction of 484 cm^-1 band in 10% QAS group. CLSM revealed densely clustered green colonies in control group and red confluent QAS-treated biofilms with significantly lower log CFU for single/dual species. Metabolic activities of Streptococcus mutans and Lactobacillus acidophilus decreased with increasing QAS exposure time.

CONCLUSION

Quaternary ammonium silanes possess antimicrobial activities and inhibit growth of cariogenic biofilms.

CLINICAL SIGNIFICANCE

Available data demonstrated use of QAS as potential antibacterial cavity disinfectant in adhesive dentistry. Experimental QAS can effectively eliminate caries-forming bacteria, when used inside a prepared cavity, and can definitely overcome problems associated with present available cavity disinfectants.

Effect of Polymeric Microparticles Loaded With Catechin on the Physicochemical Properties of an Adhesive System

The objective of this study was to synthesize and characterize epigallocatechin-3-gallate (EGCG)-loaded/poly(D-L lactide-co-glycolide) acid (PLGA) microparticles, evaluate their effects on degree of conversion and release assay of adhesives, and subsequently to examine the resin-dentin bond strength of two EGCG formulations (free EGCG or loaded into PLGA microparticles) applied as a pretreatment or incorporated into an adhesive system. The formulations were prepared according to a PLGA:EGCG ratio of 16:1 using the spray-drying technique. The size and polydispersity index were determined by light scattering in aqueous dispersion. The degree of conversion (%DC) and release assay were assessed by Fourier transform infrared spectroscopy and ultraviolet-visible spectrophotometer, respectively. Subsequently, 45 third molars were divided into five groups (n=9) according to the different EGCG application modes and prepared for bond strength testing in a universal testing machine. Results demonstrated no statistically significant difference among the DC means after the PLGA microparticles were loaded with EGCG. For the release assay, the 1.0% PLGA/EGCG group presented better results after being elected for use in the bond strength test. The resin-dentin bond strengths of the experimental groups after 12 months of water storage were significantly higher than in the control group. EGCG could improve the durability of the resin-dentin bond over time and promote a new era for adhesive dentistry with the concept of controlled release.

Evaluation of the effect of chlorhexidine and sodium hypochlorite in adhesive cementation of fiber posts - in vitro study

Abstract Introduction The attachment of fiberglass posts is achieved through an adhesive process. Failures in adhesion may occur due to the hydrolytic degradation of the adhesives, or to the degradation of the collagen fibres of the hybrid layer by intrinsic enzymes. Objective To evaluate the effect of chlorhexidine and sodium hypochlorite treatment on bond strength to dentin. Material and method Thirty bovine roots were randomly distributed into 3 groups (n=10): a) Control, b) 2% Chlorhexidine, and c) 5% Sodium Hypochlorite. Next, RelyX® ARC resin cement was used to cement the post. Each specimen resulted in samples from the three root thirds that were submitted to the pushout test (MPa) at 24 hours and 12 months. Bond strength values were analysed using the Kolmogorov-Smirnov, 3-way ANOVA and Tukey tests. The fracture mode of the pin was also analysed using stereomicroscopy. Result There were no significant differences between treatments at the immediate time (p=0.0644) or in the interaction of factors (p=0.1935). After one year, the experimental groups showed no significant differences in bond strength in relation to the control group, with the exception of the cervical third of the chlorohexidine group in which there was a significant loss of adhesion. As for the fracture mode, there was a predominance of the mixed type in all groups and thirds. Conclusion The use of chlorhexidine or hypochlorite provides neither benefits nor losses in the adhesive bond strength of fiberglass posts. However, there is an influence of the root thirds, with the worst bond strength in the apical third.