1
|
Zhang H, Xue K, Wang B, Ren W, Sun D, Shao C, Sun R. Advances in lignin-based biosorbents for sustainable wastewater treatment. BIORESOURCE TECHNOLOGY 2024; 395:130347. [PMID: 38242243 DOI: 10.1016/j.biortech.2024.130347] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/13/2023] [Revised: 01/15/2024] [Accepted: 01/16/2024] [Indexed: 01/21/2024]
Abstract
The heavy metals, pesticides and dyes in agriculture and industry caused serious water pollution have increased the urgency for the advancement of biomass-based adsorbents due to their merits of low cost, high efficiency, and environmental sustainability. Thus, this review systematically examines the recent progress of lignin-based adsorbents dedicated to wastewater purification. Commencing with a succinct exposition on the intricate structure and prevalent forms of lignin, the review proceeds to expound rational design strategies tailored for lignin-based adsorbents coupled with adsorption mechanisms and regeneration methods. Emphasis is placed on the potential industrial applications of lignin-based adsorbents, accentuating their capacity for recovery and direct utilization post-use. The future challenges and outlooks associated with lignin-based adsorbents are discussed to provide novel perspectives for the development of high-performance and sustainable biosorbents, facilitating the effective removal of pollutants and the value-added utilization of resources in a sustainable manner.
Collapse
Affiliation(s)
- Hongmei Zhang
- Liaoning Key Laboratory of Lignocellulose Chemistry and BioMaterials, Liaoning Collaborative Innovation Center for Lignocellulosic Biorefinery, College of Light Industry and Chemical Engineering, Dalian Polytechnic University, Dalian 116034, China
| | - Kai Xue
- Liaoning Key Laboratory of Lignocellulose Chemistry and BioMaterials, Liaoning Collaborative Innovation Center for Lignocellulosic Biorefinery, College of Light Industry and Chemical Engineering, Dalian Polytechnic University, Dalian 116034, China
| | - Bing Wang
- Liaoning Key Laboratory of Lignocellulose Chemistry and BioMaterials, Liaoning Collaborative Innovation Center for Lignocellulosic Biorefinery, College of Light Industry and Chemical Engineering, Dalian Polytechnic University, Dalian 116034, China
| | - Wenfeng Ren
- Liaoning Key Laboratory of Lignocellulose Chemistry and BioMaterials, Liaoning Collaborative Innovation Center for Lignocellulosic Biorefinery, College of Light Industry and Chemical Engineering, Dalian Polytechnic University, Dalian 116034, China
| | - Dan Sun
- College of Chemistry and Materials Engineering, Zhejiang A&F University, Hangzhou, Zhejiang Province 311300, China
| | - Changyou Shao
- Liaoning Key Laboratory of Lignocellulose Chemistry and BioMaterials, Liaoning Collaborative Innovation Center for Lignocellulosic Biorefinery, College of Light Industry and Chemical Engineering, Dalian Polytechnic University, Dalian 116034, China; State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou 510641, China; State Key Laboratory of Bio-fibers and Eco-textiles, Qingdao University, Qingdao 266071, China.
| | - Runcang Sun
- Liaoning Key Laboratory of Lignocellulose Chemistry and BioMaterials, Liaoning Collaborative Innovation Center for Lignocellulosic Biorefinery, College of Light Industry and Chemical Engineering, Dalian Polytechnic University, Dalian 116034, China.
| |
Collapse
|
2
|
Sun SF, Wan HF, Zhao X, Gao C, Xiao LP, Sun RC. Facile construction of lignin-based network composite hydrogel for efficient adsorption of methylene blue from wastewater. Int J Biol Macromol 2023; 253:126688. [PMID: 37666401 DOI: 10.1016/j.ijbiomac.2023.126688] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/10/2023] [Revised: 08/18/2023] [Accepted: 09/01/2023] [Indexed: 09/06/2023]
Abstract
Adsorption method is an effective approach to treat wastewater containing methylene blue. Herein, a cost-effective and eco-friendly lignin-based network composite hydrogel adsorbent (PAA@SML) was constructed by using polyacrylic acid (PAA) to crosslink with sulfomethylated lignin (SML) via free radical polymerization for adsorption of methylene blue (MB) from wastewater. The constructed PAA@SML-0.2 exhibited remarkable adsorption performance towards removal of MB, with a maximum theoretical adsorption capacity of 777.1 mg·g-1. The improved efficiency can be attributed to the well-established network structure and abundant hydrophilic functional groups present in the adsorbent, promoting the interaction between methylene blue (MB) molecules and the adsorption sites of the adsorbent. The adsorption process of the adsorbent for MB followed the pseudo-second-order kinetic and the Langmuir isotherm models, which illustrated the adsorption process attributed to monolayer chemisorption. Mechanism investigation confirmed that the adsorption of MB by PAA@SML-0.2 primarily relied on hydrogen bonding and electrostatic interactions. Moreover, the recyclability test demonstrated excellent regeneration usability and stability of PAA@SML-0.2, and the adsorption capacity maintained above 74.0 % after five cycles. This constructed lignin-based network composite hydrogel is considered to have great potential in the treatment of organic dye in wastewater.
Collapse
Affiliation(s)
- Shao-Fei Sun
- Liaoning Key Lab of Lignocellulose Chemistry and BioMaterials, Liaoning Collaborative Innovation Center for Lignocellulosic Biorefinery, College of Light Industry and Chemical Engineering, Dalian Polytechnic University, Dalian 116034, China
| | - He-Fei Wan
- Liaoning Key Lab of Lignocellulose Chemistry and BioMaterials, Liaoning Collaborative Innovation Center for Lignocellulosic Biorefinery, College of Light Industry and Chemical Engineering, Dalian Polytechnic University, Dalian 116034, China
| | - Xin Zhao
- Liaoning Key Lab of Lignocellulose Chemistry and BioMaterials, Liaoning Collaborative Innovation Center for Lignocellulosic Biorefinery, College of Light Industry and Chemical Engineering, Dalian Polytechnic University, Dalian 116034, China
| | - Ce Gao
- Liaoning Key Lab of Lignocellulose Chemistry and BioMaterials, Liaoning Collaborative Innovation Center for Lignocellulosic Biorefinery, College of Light Industry and Chemical Engineering, Dalian Polytechnic University, Dalian 116034, China.
| | - Ling-Ping Xiao
- Liaoning Key Lab of Lignocellulose Chemistry and BioMaterials, Liaoning Collaborative Innovation Center for Lignocellulosic Biorefinery, College of Light Industry and Chemical Engineering, Dalian Polytechnic University, Dalian 116034, China.
| | - Run-Cang Sun
- Liaoning Key Lab of Lignocellulose Chemistry and BioMaterials, Liaoning Collaborative Innovation Center for Lignocellulosic Biorefinery, College of Light Industry and Chemical Engineering, Dalian Polytechnic University, Dalian 116034, China
| |
Collapse
|
3
|
Guo TS, Yang SD, Cui HM, Yu QF, Li MF. Synthesis of lignin nanoparticle‑manganese dioxide complex and its adsorption of methyl orange. Int J Biol Macromol 2023; 253:127012. [PMID: 37734524 DOI: 10.1016/j.ijbiomac.2023.127012] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/19/2023] [Revised: 09/07/2023] [Accepted: 09/18/2023] [Indexed: 09/23/2023]
Abstract
Lignin nanoparticles (LNPs) were synthesized using an anti-solvent method and subsequently loaded with manganese dioxide (MnO2) via potassium permanganate treatment, resulting in the formation of MnO2@LNPs. An extensive investigation was conducted to elucidate the influence of MnO2@LNPs on the decolorization of methyl orange solution. The LNPs were successfully obtained by adjusting the preparation parameters, yielding particles exhibited average sizes ranging from 300 to 600 nm, and the synthesis process exhibited a high yield of up to 87.3% and excellent dispersion characteristics. Notably, LNPs size was reduced by decreasing initial concentration, increasing stirring rate, and adding water. In the acetone-water two-phase system, LNPs self-assembled into spherical particles driven by π-π interactions and hydrogen bond forces. Oxidation modification using potassium permanganate led to the formation of nanoscale MnO2, which effectively combined with LNPs. Remarkably, the resulting MnO2@LNPs demonstrated a two-fold increase in methyl orange adsorption capacity (227 mg/g) compared to unmodified LNPs. The process followed the Langmuir isotherm model and was exothermic.
Collapse
Affiliation(s)
- Tian-Shui Guo
- Beijing Key Laboratory of Lignocellulosic Chemistry, Engineering Research Center of Forestry Biomass Materials and Energy, Ministry of Education, Beijing Forestry University, Beijing 100083, China
| | - Shao-Dong Yang
- Beijing Key Laboratory of Lignocellulosic Chemistry, Engineering Research Center of Forestry Biomass Materials and Energy, Ministry of Education, Beijing Forestry University, Beijing 100083, China
| | - Hua-Min Cui
- Beijing Key Laboratory of Lignocellulosic Chemistry, Engineering Research Center of Forestry Biomass Materials and Energy, Ministry of Education, Beijing Forestry University, Beijing 100083, China
| | - Qiong-Fen Yu
- Yunnan Provincial Rural Energy Engineering Key Laboratory, Kunming 650500, Yunnan, China
| | - Ming-Fei Li
- Beijing Key Laboratory of Lignocellulosic Chemistry, Engineering Research Center of Forestry Biomass Materials and Energy, Ministry of Education, Beijing Forestry University, Beijing 100083, China; Yunnan Provincial Rural Energy Engineering Key Laboratory, Kunming 650500, Yunnan, China.
| |
Collapse
|
4
|
Wu W, Li P, Su W, Yan Z, Wang X, Xu S, Wei Y, Wu C. Polyaniline as a Nitrogen Source and Lignosulfonate as a Sulphur Source for the Preparation of the Porous Carbon Adsorption of Dyes and Heavy Metal Ions. Polymers (Basel) 2023; 15:4515. [PMID: 38231908 PMCID: PMC10708433 DOI: 10.3390/polym15234515] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/27/2023] [Revised: 11/16/2023] [Accepted: 11/22/2023] [Indexed: 01/19/2024] Open
Abstract
Using agricultural and forestry wastes as raw materials, adsorbent materials were prepared for dye adsorption in wastewater, which can minimize the environmental load and fully realize sustainability by treating waste with waste. Taking lignosulfonate as a raw material, due to its molecular structure having more reactive groups, it is easy to form composite materials via a chemical oxidation reaction with an aniline monomer. After that, using a sodium lignosulfonate/polyaniline composite as the precursor, the activated high-temperature pyrolysis process is used to prepare porous carbon materials with controllable morphology, structure, oxygen, sulfur, and nitrogen content, which opens up a new way for the preparation of functional carbon materials. When the prepared O-N-S co-doped activated carbon materials (SNC) were used as adsorbents, the adsorption study of cationic dye methylene blue was carried out, and the removal rate of SNC could reach up to 99.53% in a methylene blue solution with an initial concentration of 100 mg/L, which was much higher than that of undoped lignocellulosic carbon materials, and the kinetic model conformed to the pseudo-second-order kinetic model. The adsorption equilibrium amount of NC (lignosulfonate-free) and SNC reached 478.30 mg/g and 509.00 mg/g, respectively, at an initial concentration of 500 mg/L, which was consistent with the Langmuir adsorption isothermal model, and the adsorption of methylene blue on the surface of the carbon material was a monomolecular layer. The adsorption of methylene blue dye on the carbon-based adsorbent was confirmed to be a spontaneous and feasible adsorption process by thermodynamic parameters. Finally, the adsorption of SNC on methylene blue, rhodamine B, Congo red, and methyl orange dyes were compared, and it was found that the material adsorbed cationic dyes better. Furthermore, we also studied the adsorption of SNC on different kinds of heavy metal ions and found that its adsorption selectivity is better for Cr3+ and Pb2+ ions.
Collapse
Affiliation(s)
- Wenjuan Wu
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing Forestry University, Nanjing 210037, China; (P.L.); (S.X.); (C.W.)
- College of Light Industry and Food Engineering, Nanjing Forestry University, Nanjing 210037, China (Z.Y.); (X.W.); (Y.W.)
| | - Penghui Li
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing Forestry University, Nanjing 210037, China; (P.L.); (S.X.); (C.W.)
- College of Light Industry and Food Engineering, Nanjing Forestry University, Nanjing 210037, China (Z.Y.); (X.W.); (Y.W.)
| | - Wanting Su
- College of Light Industry and Food Engineering, Nanjing Forestry University, Nanjing 210037, China (Z.Y.); (X.W.); (Y.W.)
| | - Zifei Yan
- College of Light Industry and Food Engineering, Nanjing Forestry University, Nanjing 210037, China (Z.Y.); (X.W.); (Y.W.)
| | - Xinyan Wang
- College of Light Industry and Food Engineering, Nanjing Forestry University, Nanjing 210037, China (Z.Y.); (X.W.); (Y.W.)
| | - Siyu Xu
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing Forestry University, Nanjing 210037, China; (P.L.); (S.X.); (C.W.)
| | - Yumeng Wei
- College of Light Industry and Food Engineering, Nanjing Forestry University, Nanjing 210037, China (Z.Y.); (X.W.); (Y.W.)
| | - Caiwen Wu
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing Forestry University, Nanjing 210037, China; (P.L.); (S.X.); (C.W.)
- College of Light Industry and Food Engineering, Nanjing Forestry University, Nanjing 210037, China (Z.Y.); (X.W.); (Y.W.)
| |
Collapse
|
5
|
Abbaz A, Arris S, Viscusi G, Ayat A, Aissaoui H, Boumezough Y. Adsorption of Safranin O Dye by Alginate/Pomegranate Peels Beads: Kinetic, Isotherm and Thermodynamic Studies. Gels 2023; 9:916. [PMID: 37999006 PMCID: PMC10671396 DOI: 10.3390/gels9110916] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/15/2023] [Revised: 11/12/2023] [Accepted: 11/15/2023] [Indexed: 11/25/2023] Open
Abstract
Water pollution is regarded as a dangerous problem that needs to be resolved right away. This is largely due to the positive correlation between the increase in global population and waste production, especially food waste. Hydrogel beads based on sodium alginate (Alg) and pomegranate fruit peels (PP) were developed for the adsorption of Safranin O dye (SO) in aqueous solutions. The obtained Alg-PP beads were widely characterized. The effects of the contact time (0-180 min), initial concentration (10-300 mg/L), initial pH (2-10), adsorbent dosage (1-40 g/L) and the temperature (293-333 K) were investigated through batch tests. The data proved that the adsorption kinetics of SO reached equilibrium within 30 min and up to 180 min. The dye adsorption is concentration dependent while a slight effect of pH was observed. The adsorption data of SO onto synthesized beads follow the pseudo second-order model. The experimental data fitted very well to Langmuir model with correlation factor of 0.92 which demonstrated the favourable nature of adsorption. The maximum adsorption capacity of Alg-PP could reach 30.769 mg/g at 293 K. Calculation of Gibbs free energy and enthalpy indicated that adsorption of SO onto Alg-PP is spontaneous (negative ΔG) and endothermic (ΔH = 9.30 kJ/mol). Analysis of diffusion and mass transport phenomena were presented. The removal efficiency was found to be 88% at the first cycle and decreased to 71% at the end of the seventh cycle. The reported results revealed that the Alg-PP beads could be used as a novel natural adsorbent for the removal of high concentrated solutions of Safranin O which is a cationic dye from liquid affluents and as future perspective, it can be used to remove various pollutants from wastewater.
Collapse
Affiliation(s)
- Amina Abbaz
- Environmental Process Engineering Laboratory (LIPE), Faculty of Process Engineering, Salah Boubnider University Constantine 3, Constantine 25000, Algeria; (A.A.); (H.A.); (Y.B.)
| | - Sihem Arris
- Environmental Process Engineering Laboratory (LIPE), Faculty of Process Engineering, Salah Boubnider University Constantine 3, Constantine 25000, Algeria; (A.A.); (H.A.); (Y.B.)
| | - Gianluca Viscusi
- Department of Industrial Engineering, University of Salerno, Via Giovanni Paolo II, 132, 84084 Fisciano, Italy;
| | - Asma Ayat
- Environmental Process Engineering Laboratory (LIPE), Faculty of Process Engineering, Salah Boubnider University Constantine 3, Constantine 25000, Algeria; (A.A.); (H.A.); (Y.B.)
| | - Halima Aissaoui
- Environmental Process Engineering Laboratory (LIPE), Faculty of Process Engineering, Salah Boubnider University Constantine 3, Constantine 25000, Algeria; (A.A.); (H.A.); (Y.B.)
| | - Yasser Boumezough
- Environmental Process Engineering Laboratory (LIPE), Faculty of Process Engineering, Salah Boubnider University Constantine 3, Constantine 25000, Algeria; (A.A.); (H.A.); (Y.B.)
| |
Collapse
|
6
|
Mohan C, Kumari P, Kumari N, Negi A. Fabrication of Colored Polymeric Membrane Using Clay-Based Nano Pigments of Safranin O (SO) Dye. MEMBRANES 2023; 13:619. [PMID: 37504985 PMCID: PMC10383822 DOI: 10.3390/membranes13070619] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/17/2023] [Revised: 06/19/2023] [Accepted: 06/21/2023] [Indexed: 07/29/2023]
Abstract
In the present work, a novel methodology was developed for the fabrication of clay-based nano pigments with enhanced thermal stability and used further as a colorant to prepare polymeric membranes. Initially, the batch extraction studies were performed to analyze the maximum adsorption of Safranin O (SO) dye onto pristine montmorillonite (Mt) and organo montmorillonite (OMt) by varying different parameters like pH, contact time, and concentration. It was confirmed from batch extraction studies that the adsorption efficacy of pristine Mt for SO was found to be more than OMt due to their negatively charged surface. Clay-based nano pigments were fabricated by considering the optimized condition where the maximum uptake of SO was observed and further characterized by XRD, FTIR, TGA, and SEM techniques. XRD studies confirmed the intercalation of SO dye while FTIR spectra revealed surface interaction of the dye with Mt/OMt. TGA studies showed that the clay-based nano pigments had more thermal stability than pure SO. Nano pigments were used as colorants to prepare thin, transparent, and homogeneously dispersed polymeric membranes through the solvent casting method. XRD studies of the polymeric membrane confirmed that the intercalation of poly methylmethacrylate (PMMA) into the interlayer of clay increases interlayer spacing, which was further confirmed by the TEM analysis. The mechanical properties of the PMMA polymeric membrane were also enhanced after the dispersion of clay-based nano pigments.
Collapse
Affiliation(s)
- Chandra Mohan
- Department of Chemistry, School of Basic and Applied Sciences, K. R. Mangalam University Gurugram, Gurugram 122103, India
| | - Priyanka Kumari
- Department of Chemistry, Shivaji College, University of Delhi, Delhi 110027, India
| | - Neeraj Kumari
- Department of Chemistry, School of Basic and Applied Sciences, K. R. Mangalam University Gurugram, Gurugram 122103, India
| | - Arvind Negi
- Department of Bioproduct and Biosystems, Aalto University, 02150 Espoo, Finland
| |
Collapse
|
7
|
Ramirez PD, Lee C, Fedderwitz R, Clavijo AR, Barbosa DPP, Julliot M, Vaz-Ramos J, Begin D, Le Calvé S, Zaloszyc A, Choquet P, Soler MAG, Mertz D, Kofinas P, Piao Y, Begin-Colin S. Phosphate Capture Enhancement Using Designed Iron Oxide-Based Nanostructures. NANOMATERIALS (BASEL, SWITZERLAND) 2023; 13:587. [PMID: 36770547 PMCID: PMC9921849 DOI: 10.3390/nano13030587] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/23/2022] [Revised: 01/20/2023] [Accepted: 01/21/2023] [Indexed: 06/18/2023]
Abstract
Phosphates in high concentrations are harmful pollutants for the environment, and new and cheap solutions are currently needed for phosphate removal from polluted liquid media. Iron oxide nanoparticles show a promising capacity for removing phosphates from polluted media and can be easily separated from polluted media under an external magnetic field. However, they have to display a high surface area allowing high removal pollutant capacity while preserving their magnetic properties. In that context, the reproducible synthesis of magnetic iron oxide raspberry-shaped nanostructures (RSNs) by a modified polyol solvothermal method has been optimized, and the conditions to dope the latter with cobalt, zinc, and aluminum to improve the phosphate adsorption have been determined. These RSNs consist of oriented aggregates of iron oxide nanocrystals, providing a very high saturation magnetization and a superparamagnetic behavior that favor colloidal stability. Finally, the adsorption of phosphates as a function of pH, time, and phosphate concentration has been studied. The undoped and especially aluminum-doped RSNs were demonstrated to be very effective phosphate adsorbents, and they can be extracted from the media by applying a magnet.
Collapse
Affiliation(s)
- Paula Duenas Ramirez
- Institut de Physique et Chimie des Matériaux de Strasbourg, UMR 7504, University of Strasbourg, CNRS, 67034 Strasbourg, France
| | - Chaedong Lee
- Graduate School of Convergence Science and Technology, Seoul National University, 145 Gwanggyo-ro, Yeongtong-gu, Suwon-Si 16229, Gyeonggi-do, Republic of Korea
| | - Rebecca Fedderwitz
- Department of Chemical and Biomolecular Engineering, University of Maryland, 4418 Stadium Dr., College Park, MD 20740, USA
| | | | | | - Maxime Julliot
- Institut de Physique et Chimie des Matériaux de Strasbourg, UMR 7504, University of Strasbourg, CNRS, 67034 Strasbourg, France
| | - Joana Vaz-Ramos
- Institut de Physique et Chimie des Matériaux de Strasbourg, UMR 7504, University of Strasbourg, CNRS, 67034 Strasbourg, France
- Institut de Chimie et Procédés pour l’Energie, l’Environnement et la Santé (ICPEES), UMR-7515 CNRS-Université de Strasbourg, 25 rue Becquerel, 67087 Strasbourg, France
| | - Dominique Begin
- Institut de Chimie et Procédés pour l’Energie, l’Environnement et la Santé (ICPEES), UMR-7515 CNRS-Université de Strasbourg, 25 rue Becquerel, 67087 Strasbourg, France
| | - Stéphane Le Calvé
- Institut de Chimie et Procédés pour l’Energie, l’Environnement et la Santé (ICPEES), UMR-7515 CNRS-Université de Strasbourg, 25 rue Becquerel, 67087 Strasbourg, France
| | - Ariane Zaloszyc
- Institut de Chimie et Procédés pour l’Energie, l’Environnement et la Santé (ICPEES), UMR-7515 CNRS-Université de Strasbourg, 25 rue Becquerel, 67087 Strasbourg, France
| | - Philippe Choquet
- Laboratoire des Sciences de l’Ingénieur, de l’Informatique et de l’Imagerie (ICube)—CNRS/University of Strasbourg, UMR 7357 Preclinical Imaging Lab, Imaging Dpt, Hôpitaux Universitaires de Strasbourg, 67098 Strasbourg, France
| | - Maria A. G. Soler
- Institute of Physics, University of Brasilia, Brasilia 70910900, Brazil
| | - Damien Mertz
- Institut de Physique et Chimie des Matériaux de Strasbourg, UMR 7504, University of Strasbourg, CNRS, 67034 Strasbourg, France
| | - Peter Kofinas
- Department of Chemical and Biomolecular Engineering, University of Maryland, 4418 Stadium Dr., College Park, MD 20740, USA
| | - Yuanzhe Piao
- Graduate School of Convergence Science and Technology, Seoul National University, 145 Gwanggyo-ro, Yeongtong-gu, Suwon-Si 16229, Gyeonggi-do, Republic of Korea
- Advanced Institutes of Convergence Technology, 145 Gwanggyo-ro, Yeongtong-gu, Suwon-si 16229, Gyeonggi-do, Republic of Korea
| | - Sylvie Begin-Colin
- Institut de Physique et Chimie des Matériaux de Strasbourg, UMR 7504, University of Strasbourg, CNRS, 67034 Strasbourg, France
| |
Collapse
|
8
|
Fakhry H, Hassan HMA, El-Aassar MR, Alsohaimi IH, Hussein MF, ALQahtani MM, El-Amier YA. A Treatment of Wastewater Containing Safranin O Using Immobilized Myriophyllum spicatum L. onto Polyacrylonitrile/Polyvinylpyrrodlidone Biosorbent. J Inorg Organomet Polym Mater 2022. [DOI: 10.1007/s10904-022-02354-5] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/18/2023]
|
9
|
Hussin MH, Appaturi JN, Poh NE, Latif NHA, Brosse N, Ziegler-Devin I, Vahabi H, Syamani FA, Fatriasari W, Solihat NN, Karimah A, Iswanto AH, Sekeri SH, Ibrahim MNM. A recent advancement on preparation, characterization and application of nanolignin. Int J Biol Macromol 2022; 200:303-326. [PMID: 34999045 DOI: 10.1016/j.ijbiomac.2022.01.007] [Citation(s) in RCA: 8] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/02/2021] [Revised: 12/23/2021] [Accepted: 01/01/2022] [Indexed: 12/24/2022]
Abstract
Each year, 50 to 70 million tonnes of lignin are produced worldwide as by-products from pulp industries and biorefineries through numerous processes. Nevertheless, about 98% of lignin is directly burnt to produce steam to generate energy for the pulp mills and only a handful of isolated lignin is used as a raw material for the chemical conversion and for the preparation of various substances as well as modification of lignin into nanomaterials. Thus, thanks to its complex structure, the conversion of lignin to nanolignin, attracting growing attention and generating considerable interest in the scientific community. The objective of this review is to provide a complete understanding and knowledge of the synthesis methods and functionalization of various lignin nanoparticles (LNP). The characterization of LNP such as structural, thermal, molecular weight properties together with macromolecule and quantification assessments are also reviewed. In particular, emerging applications in different areas such as UV barriers, antimicrobials, drug administration, agriculture, anticorrosives, the environment, wood protection, enzymatic immobilization and others were highlighted. In addition, future perspectives and challenges related to the development of LNP are discussed.
Collapse
Affiliation(s)
- M Hazwan Hussin
- Materials Technology Research Group (MaTReC), School of Chemical Sciences, Universiti Sains Malaysia, 11800 Minden, Penang, Malaysia.
| | - Jimmy Nelson Appaturi
- Materials Technology Research Group (MaTReC), School of Chemical Sciences, Universiti Sains Malaysia, 11800 Minden, Penang, Malaysia
| | - Ng Eng Poh
- Materials Technology Research Group (MaTReC), School of Chemical Sciences, Universiti Sains Malaysia, 11800 Minden, Penang, Malaysia
| | - Nur Hanis Abd Latif
- Materials Technology Research Group (MaTReC), School of Chemical Sciences, Universiti Sains Malaysia, 11800 Minden, Penang, Malaysia
| | - Nicolas Brosse
- Laboratoire d'Etude et de Recherche sur le MAteriau Bois (LERMAB), Faculte des Sciences et Technologies, Universite de Lorraine, Vandoeuvre-les-Nancy, France
| | - Isabelle Ziegler-Devin
- Laboratoire d'Etude et de Recherche sur le MAteriau Bois (LERMAB), Faculte des Sciences et Technologies, Universite de Lorraine, Vandoeuvre-les-Nancy, France
| | - Henri Vahabi
- Université de Lorraine, CentraleSupélec, LMOPS, F-57000, Metz, France
| | - Firda Aulya Syamani
- Research Center for Biomaterial, National Research and Innovation Agency, Bogor 16911, Indonesia
| | - Widya Fatriasari
- Research Center for Biomaterial, National Research and Innovation Agency, Bogor 16911, Indonesia
| | - Nissa Nurfajrin Solihat
- Research Center for Biomaterial, National Research and Innovation Agency, Bogor 16911, Indonesia
| | - Azizatul Karimah
- Research Center for Biomaterial, National Research and Innovation Agency, Bogor 16911, Indonesia
| | - Apri Heri Iswanto
- Department of Forest Product, Faculty of Forestry, Universitas Sumatera Utara, Medan 20155, Indonesia; JATI-Sumatran Forestry Analysis Study Center, Jl. Tridharma Ujung No. 1, Kampus USU, Medan 20155, North Sumatera, Indonesia
| | - Siti Hajar Sekeri
- Materials Technology Research Group (MaTReC), School of Chemical Sciences, Universiti Sains Malaysia, 11800 Minden, Penang, Malaysia
| | - Mohamad Nasir Mohamad Ibrahim
- Materials Technology Research Group (MaTReC), School of Chemical Sciences, Universiti Sains Malaysia, 11800 Minden, Penang, Malaysia
| |
Collapse
|
10
|
Liu X, Zhang J, Cheng Y, Zhao X, Dai Z, Liu G. Efficient removal of crystal violet by polyacrylic acid functionalized ZIF-67 composite prepared by one-pot synthesis. Colloids Surf A Physicochem Eng Asp 2021. [DOI: 10.1016/j.colsurfa.2021.127655] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/25/2023]
|
11
|
Alabduljabbar FA, Haider S, Alghyamah AA, Haider A, Khan R, Almasry WA, Patel R, Mujtaba IM, Ali FAA. Ethanol amine functionalized electrospun nanofibers membrane for the treatment of dyes polluted wastewater. APPLIED NANOSCIENCE 2021. [DOI: 10.1007/s13204-021-01715-9] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/22/2022]
|
12
|
Vahabi H, Brosse N, Latif NA, Fatriasari W, Solihat N, Hashim R, Hazwan Hussin M, Laoutid F, Saeb M. Nanolignin in materials science and technology— does flame retardancy matter? BIOPOLYMERIC NANOMATERIALS 2021:515-559. [DOI: 10.1016/b978-0-12-824364-0.00003-4] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 09/02/2023]
|
13
|
Schneider WDH, Dillon AJP, Camassola M. Lignin nanoparticles enter the scene: A promising versatile green tool for multiple applications. Biotechnol Adv 2020; 47:107685. [PMID: 33383155 DOI: 10.1016/j.biotechadv.2020.107685] [Citation(s) in RCA: 69] [Impact Index Per Article: 17.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/25/2020] [Revised: 11/23/2020] [Accepted: 12/22/2020] [Indexed: 02/02/2023]
Abstract
Strategies to take advantage of residual lignin from industrial processes are well regarded in the field of green chemistry and biotechnology. Quite recently, researchers transformed lignin into nanomaterials, such as nanoparticles, nanofibers, nanofilms, nanocapsules and nanotubes, attracting increasing attention from the scientific community. Lignin nanoparticles are seen as green way to use high-value renewable resources for application in different fields because recent studies have shown they are non-toxic in reasonable concentrations (both in vitro and in vivo assays), inexpensive (a waste generated in the biorefinery, for example, from the bioethanol platform) and potentially biodegradable (by fungi and bacteria in nature). Promising studies have tested lignin nanoparticles for antioxidants, UV-protectants, heavy metal absorption, antimicrobials, drugs carriers, gene delivery systems, encapsulation of molecules, biocatalysts, supercapacitors, tissue engineering, hybrid nanocomposites, wound dressing, and others. These nanoparticles can be produced from distinct lignin types and by different chemical/physical/biological methods, which will result in varied characteristics for their morphology, shape, size, yield and stability. Therefore, taking into account that the theme "lignin nanoparticles" is a trending topic, this present review is emerging and has the discuss the current status, covering from concepts, the formation mechanism, synthesis methods and applications, to the future perspectives and challenges linked to lignin-based nanomaterials, aiming at the viability and commercialization of this biotechnological product.
Collapse
Affiliation(s)
- Willian Daniel Hahn Schneider
- Enzymes and Biomass Laboratory, Institute of Biotechnology, University of Caxias do Sul, Francisco Getúlio Vargas Street, 1130, 95070-560 Caxias do Sul, RS, Brazil.
| | - Aldo José Pinheiro Dillon
- Enzymes and Biomass Laboratory, Institute of Biotechnology, University of Caxias do Sul, Francisco Getúlio Vargas Street, 1130, 95070-560 Caxias do Sul, RS, Brazil
| | - Marli Camassola
- Enzymes and Biomass Laboratory, Institute of Biotechnology, University of Caxias do Sul, Francisco Getúlio Vargas Street, 1130, 95070-560 Caxias do Sul, RS, Brazil
| |
Collapse
|
14
|
Ekielski A, Mishra PK. Lignin for Bioeconomy: The Present and Future Role of Technical Lignin. Int J Mol Sci 2020; 22:E63. [PMID: 33374628 PMCID: PMC7793518 DOI: 10.3390/ijms22010063] [Citation(s) in RCA: 31] [Impact Index Per Article: 7.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/08/2020] [Revised: 12/19/2020] [Accepted: 12/19/2020] [Indexed: 01/29/2023] Open
Abstract
Lignin, the term commonly used in literature, represents a group of heterogeneous aromatic compounds of plant origin. Protolignin or lignin in the cell wall is entirely different from the commercially available technical lignin due to changes during the delignification process. In this paper, we assess the status of lignin valorization in terms of commercial products. We start with existing knowledge of the lignin/protolignin structure in its native form and move to the technical lignin from various sources. Special attention is given to the patents and lignin-based commercial products. We observed that the technical lignin-based commercial products utilize coarse properties of the technical lignin in marketed formulations. Additionally, the general principles of polymers chemistry and self-assembly are difficult to apply in lignin-based nanotechnology, and lignin-centric investigations must be carried out. The alternate upcoming approach is to develop lignin-centric or lignin first bio-refineries for high-value applications; however, that brings its own technological challenges. The assessment of the gap between lab-scale applications and lignin-based commercial products delineates the challenges lignin nanoparticles-based technologies must meet to be a commercially viable alternative.
Collapse
Affiliation(s)
- Adam Ekielski
- Department of Production Engineering, Warsaw University of Life Sciences, 02-776 Warsaw, Poland;
| | - Pawan Kumar Mishra
- Faculty of Business and Economics, Mendel University in Brno, 61300 Brno, Czech Republic
| |
Collapse
|
15
|
A glassy polyvinyl alcohol/silica gel hybrid composite for safranin removal: Adsorption, kinetic and thermodynamic studies. RESEARCH ON CHEMICAL INTERMEDIATES 2020. [DOI: 10.1007/s11164-020-04309-2] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/23/2022]
|
16
|
Tang Q, Qian Y, Yang D, Qiu X, Qin Y, Zhou M. Lignin-Based Nanoparticles: A Review on Their Preparations and Applications. Polymers (Basel) 2020; 12:E2471. [PMID: 33113775 PMCID: PMC7693155 DOI: 10.3390/polym12112471] [Citation(s) in RCA: 35] [Impact Index Per Article: 8.8] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/29/2020] [Revised: 10/18/2020] [Accepted: 10/20/2020] [Indexed: 12/14/2022] Open
Abstract
Lignin is the most abundant by-product from the pulp and paper industry as well as the second most abundant natural renewable biopolymer after cellulose on earth. In recent years, transforming unordered and complicated lignin into ordered and uniform nanoparticles has attracted wide attention due to their excellent properties such as controlled structures and sizes, better miscibility with polymers, and improved antioxidant activity. In this review, we first introduce five important technical lignin from different sources and then provide a comprehensive overview of the recent progress of preparation techniques which are involved in the fabrication of various lignin-based nanoparticles and their industrial applications in different fields such as drug delivery carriers, UV absorbents, hybrid nanocomposites, antioxidant agents, antibacterial agents, adsorbents for heavy metal ions and dyes, and anticorrosion nanofillers.
Collapse
Affiliation(s)
- Qianqian Tang
- College of Chemistry and Chemical Engineering, Henan Key Laboratory of Function-Oriented Porous Materials, Luoyang Normal University, Luoyang 471934, China;
| | - Yong Qian
- School of Chemistry and Chemical Engineering, State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou 510640, China; (Y.Q.); (D.Y.)
| | - Dongjie Yang
- School of Chemistry and Chemical Engineering, State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou 510640, China; (Y.Q.); (D.Y.)
| | - Xueqing Qiu
- School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou 510006, China;
| | - Yanlin Qin
- School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou 510006, China;
| | - Mingsong Zhou
- School of Chemistry and Chemical Engineering, State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou 510640, China; (Y.Q.); (D.Y.)
| |
Collapse
|
17
|
Hebert J, Wang L, Wang X, Baker J, Rivera N, Troedel M, Li Z. Mechanisms of safranin O interaction with 1:1 layered clay minerals. SEP SCI TECHNOL 2020. [DOI: 10.1080/01496395.2020.1806325] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 10/23/2022]
Affiliation(s)
- Jessica Hebert
- Department of Geosciences, University of Wisconsin – Parkside, Kenosha, Wisconsin, USA
| | - Lijuan Wang
- School of Material Sciences and Technology, China University of Geosciences, Beijing, China
| | - Xisen Wang
- Department of Chemistry, University of Wisconsin – Parkside, Kenosha, Wisconsin, USA
| | - Jessica Baker
- Department of Geosciences, University of Wisconsin – Parkside, Kenosha, Wisconsin, USA
| | - Nick Rivera
- Department of Geosciences, University of Wisconsin – Parkside, Kenosha, Wisconsin, USA
| | - Michael Troedel
- Department of Geosciences, University of Wisconsin – Parkside, Kenosha, Wisconsin, USA
| | - Zhaohui Li
- Department of Geosciences, University of Wisconsin – Parkside, Kenosha, Wisconsin, USA
| |
Collapse
|
18
|
Balayeva OO, Azizov AA, Muradov MB, Alosmanov RM, Mursalova GQ, Rahimli KS, Aghamaliyev ZA. Synthesis of zinc-aluminum mixed oxide/polyvinyl alcohol (ZnAl mixed oxide/PVA) and application in Pb(II) removal from aqueous solution. J DISPER SCI TECHNOL 2020. [DOI: 10.1080/01932691.2020.1773848] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/24/2022]
|
19
|
|
20
|
Equilibrium, Kinetic, and Thermodynamic Studies of Anionic Dyes Adsorption on Corn Stalks Modified by Cetylpyridinium Bromide. COLLOIDS AND INTERFACES 2018. [DOI: 10.3390/colloids3010004] [Citation(s) in RCA: 12] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
Abstract
Corn stalks (CS) were modified by a cationic surfactant, cetylpyridinium bromide (CPB), and used as an adsorbent (CS-CP) to remove anionic dyes [Acid Red (AR) and Acid Orange (AO)] from aqueous solutions. The FTIR analysis and the obtained calculations based on the determination of the adsorption capacity of CS towards CPB confirmed that the cationic surfactant had been adsorbed on the surface of corn stalks. Adsorption of the anionic dyes on modified corn stalks was investigated in a series of batch adsorption experiments at 303–328 K. The adsorption data were analyzed using Langmuir, Freundlich, and Temkin models. The Langmuir model was found to be more suitable for the experimental data of the anionic dyes on CS-CP than other adsorption models. Kinetic studies revealed that the pseudo-second order model showed the best fit to the experimental data. The thermodynamic parameters indicated that the adsorption process was spontaneous and exothermic. Mechanisms involving ion exchange and chemisorption might be responsible for the uptake of the anionic dyes on CS-CP. Obtained results imply that CS-CP could be applied as an effective adsorbent to remove anionic dyes from aqueous solutions.
Collapse
|